Samsung BOCHUM D 44867 User Manual

* Some of the contents of this manual may differ from your phone,  
depending on the software installed or your service provider.  
SAMSUNG ELECTRONICS  
Printed in Korea  
Code No.:GH68-06020A  
English. 10/2005. Rev. 2.1  
World Wide Web  
http://www.samsungmobile.com  
Use road safety at all times  
Do not use a hand-held phone while driving. Park  
the vehicle first.  
Switch off the phone when refuelling  
Do not use the phone at a refuelling point (service  
station) or near fuels or chemicals.  
Important  
safety  
Switch off in an aircraft  
Wireless phones can cause interference. Using them  
in an aircraft is both illegal and dangerous.  
precautions  
Switch off the phone near all medical  
equipment  
Failure to comply with the following  
precautions may be dangerous or illegal.  
Hospitals or health care facilities may be using  
equipment that could be sensitive to external radio  
frequency energy. Follow any regulations or rules in  
force.  
 
Interference  
Keep your phone away from small children  
All wireless phones may be subject to interference,  
which could affect their performance.  
Keep the phone and all its parts, including accessories,  
out of the reach of small children.  
Be aware of special regulations  
Accessories and batteries  
Meet any special regulations in force in any area and  
always switch off your phone whenever it is forbidden  
to use it, or when it may cause interference or danger.  
Use only Samsung-approved accessories and  
batteries. Use of any unauthorised accessories could  
damage your phone and may be dangerous.  
Water resistance  
• The phone could explode if the battery is  
replaced with an incorrect type.  
• Dispose used batteries according to the  
manufacturer’s instructions.  
Your phone is not water-resistant. Keep it dry.  
Sensible use  
Use only in the normal position (held to the ear). Avoid  
unnecessary contact with the antenna when the phone  
is switched on.  
Qualified service  
Only qualified service personnel may repair your  
phone.  
Emergency call  
For more detailed safety information, see "Health and  
safety information" on page 87.  
Key in the emergency number for your present  
location, then press  
.
1
Camera and camcorder  
Use the camera module on your  
phone to take a photo or record a  
video.  
About this Guide  
This User’s Guide provides you with condensed  
information about how to use your phone. To quickly  
learn the basics for your phone, please refer to “Get  
started.”  
In this guide, the following instruction icons appear:  
Special  
features of your phone  
Indicates that you need to pay careful attention  
to the subsequent information regarding safety or  
phone features.  
MP3 player  
Play MP3 music files using your  
phone as an MP3 player.  
Indicates that you can get more information on  
the referenced page.  
Bluetooth  
Indicates that you need to press the Navigation  
keys to scroll to the specified option and then  
select it.  
Send photos, images, videos, and  
other personal data, and connect  
to other devices using free,  
wireless Bluetooth technology.  
Indicates a key on the phone. For example,  
[
]
[
]
IrDA  
Indicates a soft key, whose function is displayed  
on the phone screen. For example, <Menu  
<
>
Send and receive Phonebook and  
Organiser data via an infrared port.  
>
2
Plug-in speaker  
Multimedia Message Service (MMS)  
Deliver MMS messages with a combination of  
text, images, video, and audio.  
Use the included external speaker  
to talk without having to hold the  
phone.  
E-mail  
Voice clarity  
Deliver e-mails with images, video, and audio  
attachments.  
Use the voice clarity feature to increase the  
volume and clarity of an incoming call, even in the  
midst of a crowd.  
Java  
Enjoy Java-based embedded  
games and download new games.  
Get Personal with photo caller  
ID  
See who’s calling you when their  
very own photo displays.  
Organiser  
Keep track of your daily, weekly,  
and monthly schedule.  
Name card  
Create name cards with your  
number and profile. Whenever  
introducing yourself to others, use  
this convenient electronic name  
card.  
Voice recorder  
Record memos or sounds.  
3
Play games.......................................................... 16  
Browse WAP........................................................ 16  
Use Phonebook .................................................... 17  
Send messages.................................................... 18  
View messages .................................................... 19  
Use Bluetooth wireless.......................................... 20  
Contents  
Unpack  
6
6
7
Make sure you have each item  
Your phone  
Enter text  
21  
23  
28  
85  
Buttons, features, and locations  
Get started  
ABC, T9, Number, and Symbol modes  
Call functions  
First steps to operate your phone  
Advanced calling features  
Menu functions  
Install and charge the phone ................................... 7  
Power on or off...................................................... 8  
Keys and display.................................................... 9  
Access menu functions.......................................... 11  
Customise your phone .......................................... 12  
Make/answer calls................................................ 13  
All menu options listed  
Solve problems  
Help and personal needs  
Health and safety information  
Step outside the phone  
14  
87  
94  
Begin with your camera, music, games, and other special  
features  
Index  
Use camera......................................................... 14  
Play MP3s ........................................................... 15  
4
Overview of menu functions  
To access Menu mode, press <Menu> from in idle mode.  
1 Call records  
p.28  
3 Applications (continued)  
6 Funbox  
p.60  
9 Settings  
p.74  
1 All calls  
p.28  
p.29  
p.29  
p.29  
p.29  
p.29  
p.30  
7 Convertor  
8 Timer  
9 Stopwatch  
10 SIM-AT*  
p.40  
p.41  
p.41  
p.41  
Images  
Videos  
Music  
Sounds  
p.60  
p.61  
p.61  
p.62  
p.62  
1 Time & Date  
2 Phone settings  
3 Display settings  
4 Sound settings  
5 Network services  
6 Connectivity  
7 Security  
p.74  
p.75  
p.76  
p.77  
p.78  
p.80  
p.83  
p.84  
p.85  
2 Dialled calls  
3 Received calls  
4 Missed calls  
5 Delete all  
6 Call time  
Memory status  
4 Browser  
p.42  
7 Organiser  
p.62  
7 Call costs*  
1 Home  
p.42  
p.43  
p.43  
p.43  
p.43  
p.44  
2 Bookmarks  
3 Go to URL  
4 Clear cache  
5 Profile settings  
6 Current proxy  
1 Month view  
2 Week view  
3 Day view  
p.63  
p.65  
p.65  
p.65  
p.65  
p.66  
p.66  
p.66  
p.66  
p.67  
8 Memory status  
9 Reset settings  
2 Phonebook  
p.30  
1 Contact list  
2 Add new contact  
3 Group  
p.30  
p.31  
p.32  
p.32  
p.33  
p.33  
p.33  
p.34  
4 Schedule  
* Shows only if supported by your  
SIM card.  
5 Anniversary  
6 Miscellaneous  
7 To do  
8 Missed alarm events  
9 Memo  
4 Speed dial  
5 Messages  
p.45  
5 My name card  
6 Own number  
7 Management  
8 Service number  
1 Short messages  
2 Multimedia messages  
3 Email  
4 Push messages  
5 Voice mail  
6 Text template  
7 Broadcast messages  
8 Memory status  
p.45  
p.48  
p.53  
p.59  
p.59  
p.59  
p.60  
p.60  
10 Memory status  
3 Applications  
p.34  
8 Camera  
p.67  
1 Java world  
2 MP3 Player  
3 Voice recorder  
4 World time  
5 Alarm  
p.34  
p.36  
p.38  
p.39  
p.39  
p.40  
1 Take a photo  
2 Record video  
3 Photos  
4 My photos  
5 Video clips  
6 My video clips  
p.67  
p.70  
p.72  
p.73  
p.73  
p.74  
6 Calculator  
5
 
Unpack  
Your phone  
Make sure you have each item  
Buttons, features, and locations  
Camera  
lens  
Flash  
Earpiece  
Display  
Phone  
Travel Adapter  
Navigation keys  
(Up/Down/Left/  
Right)  
Headset  
jack  
WAP access/  
Confirm key  
Right soft key  
Volume keys  
Camera  
key  
Battery  
User’s Manual  
External  
Speaker  
Left soft key  
Dial key  
Power on/off/  
Menu exit key  
You can obtain various accessories from  
your local Samsung dealer.  
Cancel/Correct  
key  
The items supplied with your phone  
and the accessories at your Samsung  
dealer may vary, depending on your  
country or service provider.  
Alphanumeric  
keys  
IrDA port  
Special  
function keys  
Microphone  
6
         
Install the battery.  
Plug the travel adapter  
into the phone.  
Get started  
First steps to operate your phone  
3
4
SIM card information  
When you subscribe to a cellular network, you receive  
a plug-in SIM (Subscriber Identity Module) card  
loaded with your subscription details, such as your  
PIN, and available optional services.  
Install and charge the phone  
Remove the battery.  
Insert the SIM card.  
Plug the adapter into a standard AC wall outlet.  
1
2
5
6
When the phone is completely charged (the battery  
icon stops blinking), unplug the adapter from the  
power outlet.  
If the phone is already  
on, first turn it off by  
Make sure that the gold-  
coloured contacts on the  
card face down into the  
phone.  
holding [  
].  
7
           
Get started  
Remove the adapter from the phone.  
Power on or off  
7
Power on  
1. Open the phone.  
2. Press and hold  
the phone.  
[
]
to turn on  
Do not turn on  
the phone when  
mobile phone  
3. If necessary, enter the PIN and  
press <OK  
>
use is prohibited.  
Power off  
1. Open the phone.  
2. Press and hold  
Low battery indicator  
[
].  
When the battery is low:  
a warning tone sounds,  
Keypad lock  
the battery low message displays, and  
When you close the phone, the keypad lock feature  
locks the exposed keys so that nothing will happen if  
the keys are accidentally pressed.  
the empty battery icon  
blinks.  
If the battery level becomes too low, the phone  
automatically turns off. Recharge your battery.  
To unlock the keypad, press and hold the left soft key  
and press <OK>.  
8
       
Keys and display  
Key(s) Description  
Key(s) Description  
Enter numbers, letters, and some special  
characters.  
Perform the function indicated on the bottom  
line of the display.  
In Idle mode, hold [1] down to access your  
voicemail.  
In Idle mode, access menu options  
Enter special characters.  
directly.page 75  
Hold [  
]
down to activate or deactivate  
In Menu mode, scroll through the menu  
options.  
Quiet mode.  
Adjusts the phone volume.  
In Idle mode, launches the Wireless  
Application Protocol (WAP) browser.  
In Menu mode, selects the highlighted menu  
option.  
In Idle mode, with the phone open, adjusts  
the keypad tone volume. With the phone  
closed, hold down to turn on the backlight.  
In Menu mode, scrolls through the menu  
options.  
(on the left)  
Sends or answers a call.  
In Idle mode, retrieves the last number  
dialled, missed, or received.  
In Idle mode, hold down to turn on the  
camera.  
In Camera mode, takes a photo or starts  
recording a video.  
(on the right)  
Deletes characters from the display.  
In Menu mode, returns to the previous menu  
level.  
Ends a call. Hold down to switch the phone  
on and off.  
In Menu mode, cancels input and returns the  
phone to Idle mode.  
9
 
Get started  
Display  
Layout  
New e-mail received or being sent  
One of the message Inboxes is full  
Call diverting feature is active  
Icons  
(continued)  
The display has the three areas.  
Icons  
displays various icons.  
page 78  
IrDA port is active  
page 83  
Text and graphics  
displays messages,  
instructions, and  
Bluetooth feature is active  
information you enter.  
page 80  
Synchronised with a PC  
GPRS network  
Soft key function  
indicators  
Menu Contacts  
shows the current  
functions assigned to the  
two soft keys.  
Home Zone, if you have  
registered for the appropriate  
service  
Received signal strength  
Icons  
Office Zone, if you have  
registered for the appropriate  
service  
Call in progress  
Out of your service area; you  
cannot send or receive calls  
Set to vibrate call ringer  
Alarm set  
page 77  
New text message  
New voicemail message  
New multimedia message  
Quiet mode is active  
page 77  
Battery power level  
10  
   
Access menu functions  
Select an  
option  
1. Press the appropriate soft key.  
Use the soft  
keys  
The roles of the soft keys vary  
depending on the function you are  
using. The bottom line of the  
2. Press the Navigation keys to  
move to the next or previous  
option.  
display indicates their current role.  
3. Press <Select> or [  
] to  
confirm the function displayed or  
option highlighted.  
Menu  
Contacts  
4. To exit, choose either of the  
following methods:  
Press <Back> or [  
move up one level.  
Press to return to Idle  
mode.  
C] to  
[
]
Press the left soft  
key to access  
Menu mode.  
Press the right soft  
key to access  
Contact list in the  
Phonebook menu.  
Use shortcuts Press the number key  
corresponding to the option you  
want.  
11  
 
Get started  
Customise your phone  
You can set a wallpaper for the idle  
screen.  
Idle mode  
Wallpaper  
1. In Idle mode, press <Menu  
>
Display  
1. In Idle mode, press <Menu  
>
and select Settings  
settings Language  
2. Select a language.  
Phone  
language  
and select Settings  
settings  
Display  
.
.
Wallpaper  
2. Select an image category.  
1. In Idle mode, press <Menu  
>
3. Press [Left] or [Right] to select  
an image.  
Call ringer  
melody  
and select Settings  
settings  
Ring tone  
Sound  
.
Incoming call  
You can change the colour for the  
display components, such as title  
bars and highlight bars.  
Menu mode  
Skin colour  
2. Press [Left] or [Right] to select  
a ringer category.  
1. In Idle mode, press <Menu  
and select Settings Display  
settings Skin  
2. Select a colour pattern.  
>
3. Press [Up] or [Down] to select a  
ringer melody.  
.
4. Press Save  
.
You can switch the phone to Quite  
mode to avoid disturbing other  
people with your phone sounds.  
Quiet mode  
Press and hold  
[
]
in Idle mode.  
12  
 
Make/answer calls  
You can protect the phone against  
unauthorised use with a phone  
password.  
Phone lock  
1. Enter an area code and phone  
Make a call  
number.  
1. In Idle mode, press <Menu  
and select Settings  
Security Change  
password  
2. Enter the default password,  
>
2. Press [ ].  
3. To end the call, press  
[
].  
.
1. When the phone is ringing,  
press [ ].  
Answer a call  
“00000000” and press <OK>.  
2. To end the call, press  
[
].  
3. Enter a new 4- to 8- digit  
password and press <OK>.  
Press [ / ].  
4. Enter the new password again  
Adjust the  
volume during  
a call  
and press <OK>.  
5. Select Phone lock  
6. Select Enable  
7. Enter the password and press  
OK>.  
.
.
<
13  
 
Step outside the phone  
Begin with your camera, music, games, and other special  
features  
1. In Idle mode, press and hold  
] to turn on the camera.  
Record a video  
[
2. Press [1] to switch to Record  
mode.  
Use camera  
3. Press [ ] to start recording.  
4. Press [ ] to stop recording.  
The video is saved  
1. Open the phone.  
Take a photo  
2. In Idle mode, press and hold  
automatically.  
[
] to turn on the camera.  
5. Press [C] to record another  
3. Aim the lens at the subject and  
adjust the image.  
video.  
4. Press [ ] to take a photo. The  
photo is saved automatically.  
1. In Idle mode, press [ ] and  
select Video clips  
Play a video  
.
5. Press [C] to take another  
2. Select the thumbnail image of  
the video you want.  
photo.  
1. In Idle mode, press [ ] and  
select Photos  
2. Select the photo you want.  
View a photo  
.
14  
     
Play MP3s  
1. From the MP3 player screen,  
Play MP3 music  
press  
[
].  
Use these methods:  
Copy MP3 files  
to the phone  
2. During playback, use the  
following onscreen keys:  
Download from the wireless  
web page 42  
pauses playback.  
resumes.  
goes back to the  
Download from a computer  
using Samsung PC Studio II  
Samsung PC Studio II User’s  
Guide  
previous file.  
skips to the next file.  
changes  
the repeat mode.  
stops playback.  
Receive via IrDA or Bluetooth  
page 80  
/
/
Options  
Back  
1. In Idle mode, press <Menu  
and select Applications  
MP3 player  
2. Press <Options> and select  
Add to list Add all or Add a  
file  
>
Create a play  
list  
To select a key, press [Left] or  
[Right], then press  
.
[
].  
To adjust the volume, use [ /  
].  
.
3. For Add a file, scroll to a file  
and press <Add>. Repeat from  
step 2.  
15  
 
Step outside the phone  
Play games  
1. Select NEW GAME > a game  
Play ArchAngel  
mode.  
1. In Idle mode, press <Menu>  
and select Applications  
Java world Downloads  
Forgotten Warrior Freekick  
or Arch Angel  
Select a game  
2. Press <NEXT>, <Play>, and  
then <Next> until the game  
starts, or <Skip> to start the  
game immediately.  
,
,
.
2. Press any key once or twice to  
launch the game.  
Browse WAP  
In Idle mode, press  
[
].  
1. Press <Play>.  
Launch the  
browser  
Play Forgotten-  
Warrior  
2. Select StartGame  
.
To scroll through browser items,  
press [Up] or [Down].  
To select an item, press <  
To return to the previous page,  
press <Back> or [ ].  
To return to the home page,  
hold down [ ].  
Navigate the  
web  
1. Select Game  
you want a team  
2. Press  
the game mode  
Play Freekick  
a player.  
>.  
[
].  
C
C
16  
   
Use Phonebook  
1. In Idle mode, press  
Contacts>.  
Find an entry  
<
To the phone’s memory  
Add an entry  
2. Select an entry.  
1. In Idle mode, enter a phone  
3. Select a number and press [  
]
number and press <Save>.  
to dial, or <Options> to access  
options.  
2. Select Phone  
a number type.  
3. Specify the contact information:  
Last name, First name, Mobile,  
Home, Office, Fax, Other, E-  
mail, Graphic ID, Alert, Group,  
and Notes.  
1. In Idle mode, press <Menu  
and select Phonebook My  
name card  
>
Create and  
send a name  
card  
.
2. Specify your contact  
information.  
4. Press  
[
]
to save the entry.  
To the SIM card  
3. Press <Save> to save the  
1. In Idle mode, enter a phone  
name card.  
number and press <Save>.  
4. To send the name card to other  
2. Select SIM  
3. Enter a name.  
4. Press to save the entry.  
.
people, press <Options> and  
select Send  
via SMS  
/MMS/  
Email Bluetooth  
/
/infrared.  
[
]
17  
 
Step outside the phone  
Send messages  
5. Add a media file.  
6. Select Message  
.
1. In Idle mode, press <Menu  
>
Send a text  
message (SMS)  
and select Messages  
messages Create  
2. Enter the message text.  
3. Press <Options> and select  
Short  
7. Enter the message text and  
.
press  
8. Press <Options> and select  
Send  
[
].  
.
Send and save or Send only  
4. Enter destination numbers.  
5. Press <Options> and select  
.
9. Enter destination numbers or  
e-mail addresses.  
10.Press <Options> and select  
Send  
.
Send  
.
1. In Idle mode, press <Menu  
>
1. In Idle mode, press <Menu  
and select Messages  
Multimedia messages  
Create  
2. Select Subject  
3. Enter the message subject and  
press  
4. Select Picture & video or  
Sound  
>
Send an e-mail  
Send a  
and select Messages  
Create  
2. Select Subject  
3. Enter the e-mail subject and  
press  
4. Select Message  
5. Enter the e-mail text and press  
Email  
multimedia  
message  
(MMS)  
.
.
.
.
[
].  
[
].  
.
.
[
].  
18  
 
When a notification appears:  
6. Select File Attach  
.
View a  
multimedia  
message  
1. Press <View>.  
7. Add image, video, music, or  
sound files.  
2. Press <Options> and select  
Retrieve. The message  
displays.  
8. Press <Options> and select  
Send  
.
9. Enter e-mail addresses.  
From the Inbox:  
10.Press <Options> and select  
1. In Idle mode, press <Menu  
and select Messages  
Multimedia messages  
Inbox  
2. Select a message.  
>
Send  
.
View messages  
.
When a notification appears:  
View a text  
message  
Press <View>. The message  
displays.  
1. In Idle mode, press <Menu  
>
View an e-mail  
and select Messages  
Inbox  
2. Select Check new mail.  
Email  
From the Inbox:  
.
1. In Idle mode, press <Menu  
>
and select Messages  
messages Inbox  
2. Select a message.  
Short  
3. Select an e-mail or header.  
.
4. If you selected a header, press  
<Options> and select  
Retrieve  
.
19  
 
Step outside the phone  
Use Bluetooth wireless  
1. Access an application,  
Phonebook Funbox  
Camera, or Organiser  
Send data  
Your phone is equipped with Bluetooth technology  
which enables you to connect the phone wirelessly to  
other Bluetooth devices and exchange data with them,  
talk hands-free, or control the phone remotely.  
,
,
.
2. Select the item you want to  
send.  
3. Press <Options> and select  
In Idle mode, press <Menu> and  
Turn on  
Bluetooth  
Send  
via Bluetooth.  
select Settings  
Connectivity  
On  
Bluetooth Activation  
.
4. Select a device.  
5. If necessary, enter the  
1. In Idle mode, press <Menu>  
and select Settings  
Connectivity Bluetooth  
My devices Search new  
device  
2. Select a device.  
Bluetooth PIN and press <OK>.  
Search for and  
pair with a  
Bluetooth  
device  
To receive data via Bluetooth, your  
phone’s Bluetooth feature must be  
active.  
Receive data  
.
If necessary, press <Yes> to  
confirm the reception.  
3. Enter a Bluetooth PIN code or  
the other device’s Bluetooth PIN  
code, if it has one, and press  
<OK>. When the owner of the  
other device enters the same  
code, the pairing is complete.  
20  
 
Using ABC mode  
Press the appropriate key until the character you want  
appears on the screen.  
Enter text  
ABC, T9, Number, and Symbol modes  
You can enter text for some features such as  
messaging, Phonebook, or Organiser, using ABC  
mode, T9 mode, Number mode, and Symbol mode.  
Characters in order displayed  
Key  
Upper case  
Lower case  
1
2
3
4
5
6
7
8
9
0
.
,
-
?
!
@
:
1
A
D
G
J
B
C
F
I
2
3
4
5
a
d
g
j
b
e
h
k
c
f
i
2
Changing the text input mode  
The text input mode indicator displays when the  
cursor is in a text field.  
E
H
K
N
Q
U
3
4
5
L
l
Press the right soft key to change the input mode.  
M
P
T
O
6
m
p
t
n
o
6
Example: Writing a text message  
R
V
Y
S
8
7
9
q
r
s
7
u
v
8
W X  
0
Z
w
x
y
z
9
ABC mode  
T9 mode  
Tips for using ABC mode  
Number mode  
Symbol mode  
To enter the same letter twice or to enter a  
different letter on the same key, wait for the cursor  
to move to the right automatically or press [Right].  
Then, enter the next letter.  
Text input mode  
Options  
indicator  
21  
         
Enter text  
Press  
Press  
[
[
]
]
to insert a space.  
3. When the word displays correctly, go to step 4.  
Otherwise, press [ ] to display alternative word  
choices for the keys that you have pressed.  
For example, OF and ME use [ ] and [ ].  
to insert a space and enter the next  
0
to change case. Lower case (No  
indicator), Initial capital ( ), and Capital lock (  
are available.  
)
6
3
Press [Left] or [Right] to move the cursor.  
4. Press  
word.  
[
]
Press [  
C
] to delete characters one by one. Press  
and hold [C] to clear the display.  
Tips for using T9 mode  
Press [  
automatically.  
Press to change case. Lower case (No  
indicator), Initial capital ( ), and Capital lock (  
are available.  
1] to enter periods or apostrophes  
Using T9 mode  
T9 is a predictive text input mode that allows you to  
key in any character using single keystrokes.  
[
]
)
Entering a word in T9 mode  
Press [Left] or [Right] to move the cursor.  
1. Press [  
each key once for each letter.  
For example, press [ ], [ ], [  
enter HELLO in T9 mode.  
2] to [9] to start entering a word. Press  
Press [  
and hold [  
C
] to delete characters one by one. Press  
C] to clear the display.  
4
3
5], [5], and [6] to  
Adding a new word to the T9 dictionary  
T9 predicts the word that you are typing, and it  
may change with each key that you press.  
This feature may not be available for some languages.  
1. Enter the word that you want to add.  
2. Enter the whole word before editing or deleting  
characters.  
2. Press [0] to display alternative words for your key  
presses. When there are no more alternative  
words, Spell displays on the bottom line.  
22  
3. Press <Spell>.  
Call functions  
4. Enter the word you want using ABC mode and  
press <OK>.  
Advanced calling features  
Using Number mode  
Making a call  
1. In Idle mode, enter the area code and phone  
number.  
Number mode enables you to enter numbers.  
Press the keys corresponding to the digits you want.  
2. Press [ ].  
Using Symbol mode  
Press [C] to clear the last digit or press and hold [C]  
to clear the whole display. You can move the cursor  
to edit an incorrect digit.  
Symbol mode enables you to insert symbols.  
To  
Press  
Making an international call  
display more symbols  
select a symbol  
[Up] or [Down].  
1. In Idle mode, press and hold  
appears.  
[
0]. The  
+
character  
the corresponding  
number key.  
2. Enter the country code, area code, and phone  
number, then press [ ].  
clear the symbol(s)  
insert the symbol(s)  
[
C
].  
Redialling recent numbers  
1. In Idle mode, press [ ] to display the list of  
recent numbers.  
<
OK>.  
2. Scroll to the number you want and press [ ].  
23  
       
Call functions  
Making a call from Phonebook  
Tips for answering a call  
When Anykey answer in the Extra settings  
menu is active, you can press any key to answer a  
Once you have stored a number in Phonebook, you  
can dial the number by selecting it from  
call, except for [ ] and <Reject>.  
p. 76  
Phonebook.p. 30  
Press <Reject> or [ ] to reject a call.  
You can also use the speed dial feature to assign your  
most frequently called numbers to specific number  
Press and hold [ / ] to mute the ringer.  
keys.  
p. 32  
Viewing missed calls  
Dialling a number from the SIM card  
If you have missed calls, the screen displays how  
many calls you have missed.  
1. In Idle mode, enter the location number for the  
phone number you want and press [ ].  
1. Press <View>.  
2. Press [Left] or [Right] to scroll through other  
numbers.  
2. If necessary, scroll through the missed calls.  
3. Press [ ] to dial the number you want.  
3. Press <Dial> or [ ] to dial the number you want.  
Ending a call  
Using the headset  
Close the phone or press [ ].  
Use the headset to make or answer calls without  
holding the phone.  
Answering a call  
When you receive an incoming call, the phone rings  
and displays the incoming call image.  
Connect the headset to the jack on the right side of  
the phone.  
Press [ ] or <Accept> to answer the call.  
24  
     
The buttons on the headset work as listed below:  
Options during a call  
To  
Press  
You can access a number of functions during a call.  
redial the last call  
answer a call  
end a call  
the button twice.  
and hold the button.  
and hold the button.  
Adjusting the volume during a call  
Use [ / ] to adjust the earpiece volume during a call.  
Press [ ] to increase the volume level and [ ] to  
decrease the volume level.  
Using the external speaker  
Use the external speaker that came with your phone  
to talk and listen with the phone a short distance  
away. First, you must plug the speaker into the phone.  
Placing a call on hold/Retrieving  
Press <Hold> or <Retrieve> to place the call on hold  
or retrieve the call.  
Making a second call  
You can make another call if your network supports it.  
1. Press <Hold> to put the call on hold.  
2. Make the second call in the normal way.  
3. Press <Swap> to switch between the calls.  
4. Press <Options> and select End held call to end  
1. During a call, press [  
] to listen and talk to the  
icon appears.  
the call on hold.  
other person hands-free. The  
5. To end the current call, press [ ].  
2. Press [  
The  
] again to return to normal phone mode.  
icon appears.  
25  
     
Call functions  
Answering a second call  
Using the voice clarity feature  
You can answer an incoming call while already on the  
phone, if your network supports it and you have  
This feature removes extraneous noise and increases  
call quality so that the person with whom you are  
speaking can hear you clearly even if you are in a  
noisy place.  
activated the call waiting feature.p. 79  
1. Press [ ] to answer the call. The first call is  
automatically put on hold.  
Press <Options> and select Voice clarity on or  
Voice clarity off  
.
2. Press <Swap> to switch between the calls.  
3. Press <Options> and select End held call to end  
Switching off the microphone (Mute mode)  
the call on hold.  
You can temporarily switch off your phone’s  
microphone so that the person on the phone cannot  
hear you.  
4. To end the current call, press [ ].  
Using a Bluetooth headset  
Press <Options> and select Mute or Unmute  
.
Use an optional Bluetooth headset to talk on the  
phone without holding the phone to your ear. To use  
this feature, you first need to register your headset  
Muting or sending key tones  
You can turn the key tones off or on.  
and connect it to the phone.  
Press <Options> and select Switch to headset or  
Switch to phone  
p. 80  
Press <Options> and select Mute keys or Send  
keys  
.
.
To communicate with answering machines or  
computerised telephone systems, Send keys must  
be selected.  
26  
       
Using Phonebook  
Using SIM services  
You can access the Phonebook menu to locate or  
The SIM service menu is available if you use a SIM  
card in your phone. A SIM card provides services such  
as news, weather, sports, entertainment, and location  
services.  
store entries.p. 30  
Press <Options> and select Phonebook  
.
Sending a sequence of DTMF tones  
Dual tone multi-frequency (DTMF) tones are the tones  
used in phones for tone dialling.  
For details, see your SIM card instructions or contact  
your service provider.  
Making a multi-party call  
Use this feature to allow as many as six people to join  
a multi-party call, or conference call.  
You can send DTMF tones as a group after entering the  
entire number you need to send or retrieving a  
number from Phonebook. This feature is helpful for  
entering a password or an account number when you  
call an automated system, like a banking service.  
Your service provider must support multi-party calls  
for you to use this feature.  
1. When connected with a teleservice system, press  
Setting up a multi-party call  
1. Call the first participant.  
<
Options> and select Send DTMF  
2. Enter the number you need to send and press  
OK>.  
.
2. Call the second participant. The first call is  
automatically put on hold.  
<
3. Press <Options> and select Join. The first  
Using the message service  
You can access the Messages menu to read an  
incoming message and send a new message.  
participant is added to the multi-party call.  
4. If desired, call another person or answer an  
incoming call.  
p. 45  
Press <Options> and select Message  
.
27  
     
5. Press <Options> and select Join  
.
Menu functions  
6. Repeat steps 4 and 5 as desired.  
All menu options listed  
Having a private conversation with one  
participant  
Call records (Menu 1)  
1. Press <Options> and select Split  
.
Use this menu to view the calls you have dialled,  
received, or missed, the length of your calls, and the  
cost of your calls.  
2. Select a name or number from the participant list.  
You can talk privately with that person, while the  
other participants converse with each other.  
To access this menu, press <Menu> in Idle mode and  
3. To return to the multi-party call, press <Options  
>
select Call records  
.
and select Join  
.
Dropping one participant  
1. Press <Options> and select Remove  
All calls (Menu 1.1)  
.
This menu displays the 20 most recent calls dialled,  
received, or missed.  
2. Select a name or number from the participant list.  
The participant is dropped from the call, but the  
call continues with the other parties.  
Accessing a call record  
1. Press [Left] or [Right] to select a call type.  
2. Press [Up] or [Down] to scroll through the call list.  
3. Close the phone or press [ ] to end the multi-  
party call.  
3. Press [ ] to dial a number, or [  
details of a call.  
] to view the  
28  
         
Using call record options  
Missed calls (Menu 1.4)  
While viewing the call list, press <Options> to access  
the following options:  
This menu displays the 20 most recently received calls  
that you did not answer.  
Details: view the details of the selected call.  
Call back: dial the number.  
Delete all (Menu 1.5)  
Use this menu to delete all of the records in each call  
type.  
Paste: save the number in Phonebook.  
Send message: send an SMS or MMS message.  
Delete: delete the selected call record.  
1. Press [  
] to check the call type(s) to clear.  
2. Press <Delete>.  
Delete all: delete all dialled, received, and missed  
call records.  
3. Press <Yes> to confirm the deletion.  
Call time (Menu 1.6)  
Dialled calls (Menu 1.2)  
This menu displays the time log for calls made and  
received. The actual time invoiced by your service  
provider will vary.  
This menu displays the 20 most recent calls you have  
dialled.  
Received calls (Menu 1.3)  
Last call time: check the length of your last call.  
This menu displays the 20 most recent calls you have  
received.  
Total sent: check the total length of all the calls  
you have dialled.  
Total received: check the total length of all the  
you have calls received.  
29  
         
Menu functions  
Reset timers: reset the call timers. You need to  
enter the phone password.  
Price/Unit: set the price per unit that is applied  
when the cost of your calls is calculated. You need  
to enter your PIN2.  
The password is preset to 00000000. You can  
change this password.p. 84  
Phonebook (Menu 2)  
Call costs (Menu 1.7)  
You can store phone numbers on your SIM card and in  
your phone’s memory. The SIM card and phone’s  
memory are physically separate, but they are used as  
a single entity called Phonebook.  
This network feature displays the cost of calls. This  
menu is available only if your SIM card supports this  
feature. Note that this is not intended to be used for  
billing purposes.  
To access this menu, press <Menu> in Idle mode and  
select Phonebook  
.
Last call cost: check the cost of your last call.  
Total cost: check the total cost of all of your calls.  
If the total cost exceeds the maximum cost set in  
Set max cost, you must reset the counter before  
you can make another call.  
Contact list (Menu 2.1)  
Use this menu to search for numbers in Phonebook.  
Press <Contacts> in Idle mode to quickly access  
this menu.  
Max cost: check the maximum cost limit set in  
Set max cost  
.
Finding an entry  
1. Enter the first few letters of the name that you  
want to find.  
Reset counters: reset the cost counters. You  
need to enter your PIN2.  
Set max cost: set the maximum cost authorised  
for your calls. You need to enter your PIN2.  
2. Select the name you want from the list.  
30  
           
3. Press [ ] to dial the number, or <Options> to  
Last name  
Mobile Home  
number in any category.  
/
First name: assign a name.  
access Phonebook options.  
/
/
Office Fax Other: add a  
/
/
Using Phonebook options  
Email: assign an e-mail address.  
While viewing a contact in Phonebook, press  
Graphic ID: assign an image as a caller ID  
image to alert you to a call from the number.  
Alert: assign a unique ringer melody to alert  
you to a call from the number.  
Group: assign the number to a caller group.  
Notes: add a memo about the person.  
<Options> to access the following options:  
Edit: edit the contact information.  
Send message: send an SMS, MMS, or e-mail  
message.  
Copy: copy the number to the phone’s memory or  
SIM card.  
3. Press [  
] to save the contact.  
Send: send the contact via SMS, MMS, e-mail,  
Bluetooth, or infrared port.  
Storing a number on the SIM card  
1. Select SIM and enter a name.  
Delete: delete the contact.  
2. Press [Down] and enter a phone number.  
Add new contact (Menu 2.2)  
3. If necessary, press [Down] and change the location  
number.  
Use this menu to add a new contact to Phonebook.  
4. Press [  
] to save the contact.  
Storing a number in the phone’s memory  
1. Select Phone  
.
2. Press [Down] and change the settings or enter  
information about the contact.  
31  
         
Menu functions  
View: display the members of the selected group.  
Add: add a new group.  
Group (Menu 2.3)  
Use this menu to organise your contacts in caller  
groups.  
Edit: change the properties of the selected group.  
Delete: delete the group, but the members of the  
group are not deleted from Phonebook.  
Creating a new caller group  
1. Press <Options> and select Add  
.
2. Enter a name for your group.  
Speed dial (Menu 2.4)  
3. Select the graphic ID line and select an image.  
4. Select the alert line and select a melody.  
5. Press <Save> to save the group.  
Use this menu to assign speed dial numbers (2 to 9)  
for eight of your most frequently called numbers.  
Assigning speed dial entries  
Adding members to a caller group  
1. Select a group.  
1. Select a key location from  
for your voice mail server.  
2
to  
9. Key  
1
is reserved  
2. Press [  
] to open the Contact list screen.  
2. Select the contact you want from the contact list.  
3. Select the contact you want to add to the group.  
Managing speed dial entries  
4. To add more members, press <Options> and  
While viewing the Speed dial screen, press  
select Add  
a contact.  
<Options> to access the following options:  
5. Repeat step 4 as desired.  
Add: assign a number to an unassigned key.  
Managing caller groups  
Change: assign a different number to an assigned  
key.  
From the group list, press <Options> to access the  
following options:  
Remove: clear all speed dial settings.  
32  
         
Dialling speed dial entries  
Own number (Menu 2.6)  
Press and hold the appropriate key in Idle mode.  
Use this feature to check your phone numbers, or to  
assign a name to each of the numbers.  
My name card (Menu 2.5)  
Changes made here do not affect the actual subscriber  
numbers on your SIM card.  
Use this menu to create a name card and send it to  
other people.  
Management (Menu 2.7)  
Saving your name card  
Use this menu to manage Phonebook.  
The procedure for creating your name card is the  
same as the one for saving a number in the phone’s  
Default saving: select a default memory location  
memory.p. 31  
to save contacts.  
If you select Ask on saving, the phone will ask  
you to select a memory location when saving a  
number.  
Using name card options  
After saving your name card, press <Options> to  
access the following options:  
Copy all to phone: copy all of the contacts stored  
on the SIM card to the phone’s memory.  
Edit: edit the name card.  
Send: send the name card via SMS, MMS, e-mail,  
Bluetooth, or infrared port.  
Delete all: delete all of the contacts from your  
phone’s memory, your SIM card, or both.  
Exchange name card: exchange the name card  
with another person’s name card via the Bluetooth  
feature.  
1. Press [  
] to check the location(s) to clear.  
2. Press <Delete>.  
3. Press <Yes> to confirm the deletion.  
Delete: delete the name card.  
33  
         
Menu functions  
4. Enter the phone password and press <OK>.  
Java world (Menu 3.1)  
The password is preset to 00000000. You can  
Use this menu to access and play Java games and to  
change the network settings required for accessing  
Java services.  
change this password.p. 84  
Memory status: display the number of contacts  
you have stored in Phonebook.  
Using Java game options  
From the Java world screen, select Downloads and  
press <Options> to access the following options:  
Service number (Menu 2.8)  
This menu is available if your SIM card supports  
Service Dialling Numbers (SDN). Use this menu to  
view the list of SDNs assigned by your service  
provider, including emergency numbers, directory  
enquiries, and voice mail numbers.  
Launch: launch the selected MIDlet.  
Application Settings: set a game to be continued  
when a call comes in or an alarm sounds during  
the game. You can also set the phone to exchange  
game information with the network while playing  
an online game or when you need to connect to  
the Internet.  
Scroll to the number you want and press <Dial> or  
[
].  
Delete: delete the MIDlet.  
Applications (Menu 3)  
Properties: view the MIDlet properties.  
Use this menu to play Java games, to play MP3 music  
files, to record a voice memo, to set time zones and  
alarms, or to use the phone as a calculator, timer, or  
stopwatch.  
Playing Forgotten Warrior  
1. From the Java world menu, select Downloads  
Forgotten Warrior  
.
2. Press any key twice.  
To access this menu, press <Menu> in Idle mode and  
3. Press <PLAY>.  
select Applications  
.
34  
         
4. Select StartGame  
.
5. Press <Next> until the game starts, or <Skip> to  
start the game immediately.  
5. Press <OK> to start a game.  
During a game, press <OPTIONS> to access game  
options.  
During a game, press <OPTIONS> to access game  
options.  
Changing Java settings  
Playing Freekick  
You can change the settings for accessing Java  
services.  
1. From the Java world menu, select Downloads  
Freekick  
2. Press any key.  
3. Select Game  
team a player.  
4. Press [ ] to start a game.  
.
1. From the Java world menu, select Settings  
.
2. Change the following settings:  
the game mode you want  
a
APN: enter the access point name.  
Login ID: enter the User ID.  
Password: enter the password.  
Proxy: select whether or not you use a proxy  
server to access network services. Depending  
on this setting, options in Proxy settings vary.  
Proxy settings: provide you with the following  
options:  
During a game, press [ ] to access game options.  
Playing Arch Angel  
1. From the Java world menu, select Downloads  
Arch Angel  
.
2. Press any key.  
When the proxy is set to Enable  
:
3. Select NEW GAME  
a game mode.  
IP address: enter the HTTP proxy address.  
4. Press <NEXT> and then <Play>.  
Port: enter the port number.  
35  
Menu functions  
When the proxy is set to Disable  
:
Creating a play list  
DNS1: Enter the primary DNS address.  
DNS2: Enter the secondary DNS address.  
Checking memory status  
You can view the amount of total and used memory for  
Java games.  
Add the MP3 files to the play list so you can play them.  
1. From the MP3 player screen, press <Options  
and select Add to list  
2. Select either of the following options:  
>
.
Add all: add all of the files in the phone’s  
memory to the play list.  
From the Java world menu, select Memory status  
.
Add a file: add one file to the play list.  
MP3 Player (Menu 3.2)  
3. If you selected Add a file, scroll to a file and press  
Add>. Repeat from step 1.  
Use this menu to enjoy music. First, you need to save  
MP3 files in your phone’s memory.  
<
4. Press <Back> to go back to the MP3 player  
Downloading or receiving MP3 music files  
screen.  
Use these methods to save MP3 files to your phone:  
Playing MP3 files  
Download from the wireless web  
p. 42  
From the MP3 player screen, press [  
During playback:  
].  
Download from a computer using the Samsung PC  
Studio II programmeSamsung PC Studio II  
Use the following buttons on the display:  
User’s Guide  
Via an active IrDA or Bluetooth connection  
p. 80  
The downloaded or received files are stored in the  
Music folder. p. 61  
Buttons  
Function  
Pauses  
Resumes  
36  
   
Settings: change the default settings for playing  
MP3 files.  
Buttons  
Function  
Stops  
Repeat: select a repeat mode.  
Shuffle: select a playing order.  
Volume: select a volume level.  
Returns to the previous file  
Skips to the next file  
Changes the repeat mode  
Lock volume key: lock [ / ] so that you can  
prevent an accidental press of the keys from  
affecting playback.  
/
/
To select a button, press [Left] or [Right] to  
highlight it and press [ ].  
Equalizer value: select an equalizer setting.  
Press [ / ] to adjust the volume.  
Properties: view the properties of the file.  
Press <Stop> to stop playback.  
Changing the play list  
Using MP3 file options  
1. From the MP3 player screen, press <Options  
>
and select Open play list to access the play list.  
From the MP3 player screen, press <Options> to  
access the following options:  
2. Press <Options> to access the following options:  
Play/Pause: begin/pause playback.  
Play: play the currently selected file.  
Add to list: add files to the play list.  
Move list: move the selected file to the  
position you want within the play list.  
Remove: remove the file from the play list.  
Remove all: remove all files from the play list.  
Send: send the currently selected file via e-mail,  
Bluetooth, or infrared port.  
Open play list: go to the play list.  
Set as: set the file as your ring tone or as a caller  
alert melody for a Phonebook entry.  
Delete: delete the file.  
37  
Menu functions  
Playing a voice memo  
Voice recorder (Menu 3.3)  
1. From the Voice record screen, press <Options  
>
Use this menu to record voice memos. A voice memo  
can be up to one hour long.  
and select Go to voice list  
.
2. Select a voice memo. The memo plays.  
During playback:  
Recording a voice memo  
1. Press [  
] to start recording.  
Use the following buttons on the display.  
2. Speak into the microphone.  
Buttons  
Function  
Pauses  
Select  
Select  
to pause the recording.  
to resume the recording.  
3. When you finish, press <Stop> or select  
. The  
Resumes  
Stops  
voice memo is automatically saved.  
4. Press <Options> to access the following options:  
Play: play back your voice memo.  
Send: send the voice memo via MMS, e-mail,  
Bluetooth, or infrared port.  
Rename: change the name of the voice memo.  
Delete: delete the voice memo.  
Protection: protect the voice memo from  
being deleted.  
To select a button, press [Left] or [Right] to  
highlight it and press [ ].  
Press [ / ] to adjust the volume.  
Press <Stop> to stop playback.  
Using voice memo options  
From the Voice record screen, press <Options> to  
access the following options:  
Properties: view the properties of the voice  
mail.  
Record: record a new voice memo.  
38  
         
Settings: change the default settings for  
recording a voice memo.  
Viewing and setting a foreign time zone  
1. From the world map, press [Down].  
Recording time: select a recording time.  
2. Press [Left] or [Right] to select the foreign time  
zone you want to view.  
Volume: select a volume level.  
3. Press [  
] to save the time zone.  
Default name: change the default prefix of the  
voice memo.  
Applying Daylight Savings Time  
1. From the world map, press <Options> and select  
Equalizer value: select an equalizer setting.  
Go to voice list: go to the list of voice memos you  
have recorded.  
Set daylight saving time  
.
2. Press [ ] to check the time zone(s) you want.  
3. Press <Save>.  
World time (Menu 3.4)  
Use this menu to set your local time zone and find out  
what time it is in another part of the world.  
Alarm (Menu 3.5)  
Use this menu to set alarms to ring at a specific time.  
Setting your local time zone  
Setting an alarm  
1. Select the type of alarm.  
1. From the world map, press [Left] or [Right] to  
select the city that corresponds to your home time  
zone. As the time line moves, the time and date of  
the given zone display.  
2. Press [Left] or [Right] to select On on the Alarm  
line and press [Down].  
3. Enter the time for the alarm to sound and press  
[Down].  
2. Press [  
] to save the time zone.  
39  
     
Menu functions  
4. Select AM or PM in 12-hour time format.  
Calculator (Menu 3.6)  
Your phone is preset to a 24-hour format. You  
Use this menu to perform basic arithmetic functions  
such as addition, subtraction, multiplication, and  
division.  
can change the time format.p. 74  
5. Select the Alarm day line.  
1. Enter the first number.  
6. Press [  
] to check the day(s) for the alarm.  
Press [ ] to insert a decimal point.  
2. Press [ ] to access the math function you want.  
3. Enter the second number.  
7. Press <OK>.  
8. Select the Alarm tone line and select an alarm  
melody.  
4. Press <Equal> to view the result.  
9. Press <Save> and then <Yes>.  
Stopping an alarm  
Convertor (Menu 3.7)  
When the alarm sounds, choose either of the following  
options to stop the alarm:  
Use this menu for common conversions, such as  
currency and temperature.  
Press <Confirm>.  
1. Select the convertor type you want.  
Press <Snooze> or any key to stop the alarm for  
5 minutes. You can do this a maximum of 5 times.  
2. Press [Left] or [Right] to select the original unit  
and press [Down].  
Setting the alarm to ring even if the phone is  
off  
3. Enter the value to be converted and press [Down].  
Press [ ] to insert a decimal point.  
Press [ ] to change the temperature to above  
zero (+) or below zero (-).  
From the Alarm screen, select Auto power  
On.  
If the phone is off when it is time for the alarm to ring,  
the phone switches on and sounds the alarm.  
40  
   
4. Press [Left] or [Right] to select the unit you want  
to convert to.  
Stopwatch (Menu 3.9)  
Use this menu to measure elapsed time. The precision  
of the stopwatch is one one-hundredth of a second.  
The maximum measurement time is 10 hours.  
The equivalent value for the amount you entered  
displays.  
1. Press [  
2. Press [  
] to start the timer.  
Timer (Menu 3.8)  
] to check an interval. You can repeat  
Use this menu to set a period of time for the phone to  
count down. The phone will sound an alarm when the  
specified period of time has expired.  
this step for a total of 4 intervals.  
SIM-AT (Menu 3.10)  
Starting the timer  
1. Press <Set>.  
This menu is available if you use a SIM-AT card that  
provides additional services, such as news, weather,  
sports, entertainment, and location services. Available  
services may vary, depending on your service  
provider’s plans.  
2. Enter the length of time you want to count down.  
3. Press [  
] to start counting down.  
Stopping the timer  
For details, see your SIM card instructions or contact  
your service provider.  
Press any key to stop the timer when it rings.  
Press [ ] on the Timer screen to stop the timer  
before it rings.  
41  
     
Menu functions  
Selecting and using browser menu options  
1. Press <Menu> and select Menu. Or select the  
Browser (Menu 4)  
The Wireless Application Protocol (WAP) browser on  
your phone allows you to access the wireless web.  
Using the WAP browser, you can access updated  
information and a wide variety of media content, such  
as wallpapers, ring tones, and music files.  
on the top of the screen.  
2. Select one of the following browser options:  
Back: go back to the previous page.  
Home: go back to the homepage.  
Exit: exit the WAP browser.  
Reload: reload the current page.  
Show URL: display the URL address of the  
current web page. You can also set the current  
page as the homepage for the WAP browser.  
About...: view version information for your  
WAP browser.  
To access this menu, press <Menu> in Idle mode and  
select Browser  
.
Home (Menu 4.1)  
Use this menu to connect your phone to the network  
and load the homepage of the wireless web service  
provider. You can also press [  
] in Idle mode.  
Navigating with the WAP browser  
Using WAP page options  
From any WAP page, press [ ] to access the following  
options:  
To  
Press  
scroll through browser items  
select a browser item  
return to the previous page  
return to the homepage  
[Up] or [Down].  
Go to URL: enter a URL address manually.  
<
<
>.  
Bookmarks: switch to the Bookmarks menu.  
Menu 4.2  
Messages: check the Inbox  
box in the Short messages menu. You can also  
create and send a new SMS message. p. 45  
Back> or [C].  
,
Outbox, and Draft  
and hold [C].  
42  
     
Funbox: switch to the Funbox menu.  
p. 60  
Delete: delete the bookmark.  
Exiting the WAP browser  
Go to URL (Menu 4.3)  
Press [ ] to exit the browser.  
Use this menu to manually enter the URL address of a  
website and access the website.  
Bookmarks (Menu 4.2)  
Use this menu to save URL addresses to quickly access  
a website.  
Clear cache (Menu 4.4)  
Use this menu to clear the cache, which is the  
temporary memory that stores the web pages you  
have recently accessed.  
Adding a bookmark  
1. Select an empty location.  
2. Enter a name for the bookmark and press [Down].  
3. Enter a URL address.  
Profile settings (Menu 4.5)  
Use this menu to set up servers for the WAP browser.  
Contact your service provider for details about your  
settings options.  
4. Press [  
] to save the bookmark.  
Accessing a bookmarked page  
Scroll to a bookmark item and press [  
].  
For each server, the following options are available:  
Using bookmark options  
Profile name: assign a name to the server profile.  
After saving an item, press <Options> to access the  
following options:  
Home URL: set the address of your homepage.  
Bearer: select a bearer for each type of network  
Go: access the website.  
address accessed.  
Edit: edit the address and name of the bookmark.  
43  
       
Menu functions  
Proxy: select whether or not the phone uses a  
proxy server to launch the WAP browser. Your  
service provider can tell you if your network  
requires a proxy server, and they can give you the  
appropriate settings.  
GSM settings: customise the following GSM  
network settings:  
When the proxy is set to Enable  
:
IP address: enter the WAP gateway address.  
Port: enter the port number.  
GPRS settings: customise the following GPRS  
network settings:  
Dial number: enter the PPP server phone number.  
Login ID: enter the user ID.  
When the proxy is set to Enable  
:
Password: enter the password.  
IP address: enter the WAP gateway address.  
Data call type: select a data call type.  
Port: enter the port number.  
When the proxy is set to Disable  
:
APN: enter the access point name of the GPRS  
DNS 1: enter the primary address.  
DNS 2: enter the secondary address.  
Dial number: enter the PPP server phone number.  
Login ID: enter the user ID.  
network gateway.  
Login ID: enter the User ID.  
Password: enter the password.  
When the proxy is set to Disable  
:
Password: enter the password.  
DNS 1: enter the primary address.  
Data call type: select a data call type.  
DNS 2: enter the secondary address  
.
APN: enter the access point name of the GPRS  
network gateway.  
Current proxy (Menu 4.6)  
Use this menu to activate one of the proxy servers you  
have set up.  
Login ID: enter the user ID  
.
Password: enter the password  
.
44  
 
3. Press <Options> to access the following options:  
Messages (Menu 5)  
Text style: change the text attributes.  
Add media: add a picture, animated image, or  
a melody to the message.  
Use the Messages menu to send and receive short  
messages, multimedia messages, and e-mails. You  
can also use WAP push message, Voice mail, and Cell  
broadcast message features.  
Text template: retrieve a text template.  
Save message: save the message in the  
Draft box.  
To access this menu, press <Menu> in Idle mode and  
select Messages  
.
Language select: change the language used  
in T9 input mode.  
Short messages (Menu 5.1)  
4. When you finish, press <Options> and select  
Send and save or Send only  
Short Message Service (SMS) allows you to send or  
receive text messages including pictures, audio clips,  
and animated images.  
.
5. Enter a destination number.  
To send the message to more than one recipient,  
press [Down] and fill in the destination fields.  
The maximum number of characters allowed in a  
short message varies by service provider. If your  
message exceeds the maximum number of  
characters, the phone will split the message.  
6. Press <Options> and select Send  
.
Viewing received SMS messages  
1. From the Short messages menu, select Inbox  
.
Creating an SMS message  
1. From the Short messages menu, select Create  
2. Select a message.  
.
While viewing the message list, press <Options> to  
access the following options:  
2. Enter your message.  
You can enter up to 160 standard characters, or  
approximately 70 Unicode characters, such as ‘â.  
View: display the message.  
45  
                 
Menu functions  
Reply: reply to the sender.  
Send: forward the message.  
Delete: delete the message.  
Delete all: delete all messages.  
Call back: call the sender.  
Block number: add the sender’s number to the  
Blocked number list.  
Protection: protect the message from being  
deleted.  
Viewing sent or saved SMS messages  
1. From the Short messages menu, select Outbox  
Block number: add the sender’s number to the  
Blocked number list.  
or Draft  
.
2. Select a message.  
While viewing a message, press <Options> to access  
While viewing the message list, press <Options> to  
the following options:  
access the following options:  
Reply: reply to the sender.  
Send: forward the message.  
Call back: call the sender.  
Edit: edit the message.  
View: open the message.  
Send: send or resend the message.  
Edit: edit the message.  
Delete: delete the message.  
Delete all: delete all messages.  
Delete: delete the message.  
Cut media: save media items from the message  
to your phone’s memory.  
While viewing a message, press <Options> to access  
the following options:  
Cut address: extract URLs, e-mail addresses, or  
phone numbers from the message.  
Send: send or resend the message.  
Edit: edit the message.  
Transfer: move the message between the SIM  
card and the phone’s memory.  
Delete: delete the message.  
46  
       
Cut address: extract URLs, e-mail addresses, or  
phone numbers from the message.  
Character support: select a character  
encoding type. If you select Auto, the phone  
switches the encoding type from GSM-alphabet  
to Unicode if you enter a unicode character. Use  
of Unicode encoding will reduce the maximum  
number in a message to about half.  
Validity period: set the length of time your  
messages are stored in the message centre  
while the network attempts to deliver them.  
Message type: set the default message type.  
Service centre: store or change the number  
of your message centre.  
Transfer: move the message between the SIM  
card and the phone’s memory.  
Protection: protect the message from being  
deleted.  
Changing SMS settings  
1. From the Short messages menu, select  
Settings  
.
2. Select a setting profile to be customised. The last  
setting profile accessed will be activated for  
sending subsequent messages.  
Setting up the Blocked number list  
3. Change the following settings:  
Use the Blocked number list to reject SMS messages  
from specific phone numbers.  
The setting options available in this menu may  
vary depending on your service provider.  
1. From the Short messages menu, select Block  
number  
.
Reply path: allow the recipient to reply to you  
through your message centre.  
Delivery report: set the network to inform  
you when your message has been delivered.  
2. Enter the phone number you want to block.  
Press [Down] and add up to ten phone numbers.  
3. Press <Options> and select Save  
.
47  
   
Menu functions  
4. Select the Message line and enter the text.  
Clearing SMS message boxes  
1. From the Short messages menu, select Delete  
5. Press <Options> to access the following options:  
all  
.
Edit: edit the subject or text of your message.  
Add media sound: add more photos, videos,  
or sounds to the message.  
2. Press [  
cleared.  
] to check the message box(es) to be  
/
3. Press <Delete>.  
Preview: display the message you have  
created.  
Add page: add pages. Move to each page by  
pressing [Left] or [Right] on the message  
screen.  
Page timing: specify how long a page  
displays. After the specified time, the display  
automatically scrolls to the next page.  
Text style: format the text colour, size, or  
attributes.  
4. Press <Yes> to confirm the deletion.  
Multimedia messages (Menu 5.2)  
Multimedia Message Service (MMS) delivers messages  
containing a combination of text, image, video, and  
audio, from phone to phone or from phone to e-mail.  
Creating an MMS message  
1. From the Multimedia messages menu, select  
Create  
.
Clear subject/Picture & Video/sound/  
message: clear the subject, images, audio, or  
text.  
Delete page: delete an added page.  
Save message: save the message in the  
2. Select the Subject line and enter the subject.  
3. Select the Picture & Video or Sound line and add  
an image, a video, or an audio file.  
The maximum size allowed for an MMS message  
can differ depending on the country. If you  
cannot attach another file, add another page.  
Draft  
6. When you have finished, press <Options> and  
select Send  
,
My folder, or Template box.  
.
48  
       
7. Enter a phone number or e-mail address.  
Reply all: send a reply to the sender and all of the  
recipients in the To and Cc fields.  
To send the message to more than one recipient,  
press [Down] and fill in additional destination  
fields.  
Forward: forward the message to another person.  
If the message contains media purchased on the  
Internet, forwarding is not available.  
8. Press <Options> and select Send  
.
Call back: call the sender.  
Viewing received MMS messages  
Delete: delete the message.  
Delete all: delete all messages.  
1. From the Multimedia messages menu, select  
Inbox  
.
Save as template: save a copy of the message in  
the Template folder.  
This menu displays MMS messages that you have  
received. The following icons tell you the message  
status:  
Properties: view the message properties.  
has been read  
has not been read  
is being retrieved from the server  
Notification that you have read  
Notification that you have not read  
When you select a notification, you can access  
Retrieve to retrieve the message from the MMS  
server.  
While viewing a message, press <Options> to access  
the following message options:  
2. Select a message.  
Replay: replay the message.  
While viewing the message list, press <Options> to  
access the following options:  
Reply: send a message to the sender.  
View: open the message.  
Reply: send a reply to the sender.  
49  
         
Menu functions  
Reply all: send a reply to the sender and all of the  
recipients in the To and Cc fields.  
While viewing the message list, press <Options> to  
access the following options:  
Forward: forward the message to another person.  
If the message contains media content purchased  
on the Internet, forwarding is not available.  
View: open the message.  
Send: send or resends the message.  
Edit: edit the message.  
Call back: call the sender.  
Delete: delete the message.  
Delete: delete the message.  
Delete all: delete all of messages.  
Properties: display the message properties.  
Cut media: save media items from the message  
to your phone’s memory.  
While viewing a message, press <Options> to access  
the following options:  
Cut address: extract URLs, e-mail addresses, or  
phone numbers from the message.  
Replay: replay the message.  
Send: send or resends the message.  
Edit: edit the message.  
Move to my folder: move the message to the My  
folder box.  
Save as template: save a copy of the message in  
the Template box.  
Delete: delete the message.  
Properties: view the message properties.  
Cut media: (for My folder) save media items  
from the message to your phone’s memory.  
Viewing sent or saved MMS messages  
1. From the Multimedia messages menu, select  
Cut address: (except Draft) extract a URL, e-mail  
address, or phone number from the message.  
Outbox  
,
Draft, or My folder  
.
Move to my folder: move the message to the My  
folder box.  
2. Select a message.  
50  
       
Save as template: (except Draft) save a copy of  
the message in the Template box.  
Send: send the template.  
Edit: edit the template.  
Properties: display the message properties.  
Delete: delete the template.  
Using MMS templates  
Changing MMS settings  
Your phone has 11 preset messages that you can use  
when composing a message.  
You can customise the settings for sending and  
receiving MMS messages.  
1. From the Multimedia messages menu, select  
1. From the Multimedia messages menu, select  
Template  
.
Settings  
.
2. Select an MMS template.  
2. Select a setting category and change the settings.  
While viewing the template list, press <Options> to  
access the following options:  
Send settings  
Priority: set the priority level of your messages.  
View: display the template.  
Send: send the template.  
Edit: edit the template.  
Validity period: set the length of time your  
messages are stored in the message centre.  
Delivery after: set the time delay before  
messages are sent.  
New: add a new template.  
Delete: delete the template.  
Delete all: delete all of templates.  
Address hiding: hide your phone number on the  
recipient’s phone.  
Delivery report: set the network inform to you  
when your message has been delivered.  
While viewing a message, press <Options> to access  
the following options:  
Read reply: request a reply from the recipient.  
Replay: replay the template.  
51  
     
Menu functions  
Receive settings  
MMS profiles  
Home reception: determine if your phone  
retrieves new messages automatically when you  
are in your home service area.  
You can configure required network settings for MMS.  
The last profile accessed is automatically activated for  
sending or receiving subsequent messages.  
Roaming reception: determine if your phone  
retrieves new messages automatically when you  
are roaming in another network.  
Check with your service provider before you change  
any MMS settings on your phone.  
Current profile: select a profile.  
Home reception and Roaming reception have the  
following options:  
Profile settings: customise the following options  
for each profile:  
Automatic: the phone automatically retrieves  
messages from the server.  
Profile name: assign a name to the MMS profile.  
Reject: the phone rejects all messages.  
Server URL: enter the address of your MMS  
server.  
Manual: the phone displays notifications. Use the  
Retrieve option to manually download new  
messages.  
Proxy: connect to the GPRS network using the  
proxy server.  
Anonymous reject: reject messages from  
anonymous senders.  
GPRS settings: customise the settings required  
for connecting to the GPRS network.  
Adverts reject: reject advertisements.  
-
-
IP address: (when the proxy is set to Enable)  
enter the gateway address.  
Report allowed: send a delivery report from the  
network to the sender.  
Port: (when the proxy is set to Enable) enter  
the port number.  
52  
-
-
-
DNS1: (when the proxy is set to Disable) enter  
the primary address.  
Email (Menu 5.3)  
You can send and receive e-mails that include text,  
audio, and images. To use this feature, you need to  
subscribe to an e-mail service and set up your e-mail  
profile and account.  
Creating an e-mail  
1. From the Email menu, select Create  
DNS2: (when the proxy is set to Disable) enter  
the secondary address.  
APN: enter the access point name used for the  
address of the GPRS network.  
p. 58, p. 57  
-
-
Login ID: enter the user ID.  
.
Password: enter the password.  
2. Select the Subject line and enter the subject of  
Version: select an available OMA version and  
maximum size limit for sending or receiving  
messages.  
your e-mail.  
3. Select the Message line and enter the e-mail text.  
4. Select the File attach line.  
Depending on your service provider, it may not  
be possible to support the maximum limit  
295KB. In this case, try again after changing the  
setting to 100KB.  
5. Add Images  
,
Videos, Music, or Sound.  
6. Press <Options> to access the following options:  
Add: add a subject, text, or media files.  
Edit: edit the subject or text.  
View: open the attached file.  
Save Email: save the e-mail in the Draft or  
My folder box.  
Clearing MMS message boxes  
1. From the Multimedia messages menu, select  
Delete all  
2. Press [  
cleared.  
.
] to check the message box(es) to be  
Clear subject/message: clear the subject or  
text.  
3. Press <Delete>.  
4. Press <Yes> to confirm the deletion.  
53  
       
Menu functions  
Remove attachment: delete the selected  
attachment.  
Remove all attachments: delete all  
attachments.  
• The icon changes to an open envelope when  
you read the e-mail.  
• An  
!
icon shows that an e-mail was sent with  
high priority. A grey icon means that the  
e-mail is of low priority.  
7. When you finish, press <Options> and select  
Send  
.
8. Enter an e-mail address.  
3. Scroll to an e-mail or header and press [  
].  
To send the e-mail to more than one recipient,  
press [Down] and fill in additional destination  
fields.  
4. If the e-mail has more than one page, press [ / ]  
to scroll through pages one by one.  
Press [ ] or [ ] to move to the first or last page.  
5. Select an attached file to view or play it.  
9. Press <Options> and select Send  
.
Viewing received e-mails  
1. From the Email menu, select Inbox  
While viewing the e-mail list, press <Options> to  
access the following options:  
.
2. Select Check new mail to get new mails from  
Options may vary depending on the status of the  
e-mail.  
your server.  
The phone checks for new e-mails and retrieves  
received e-mails. The icons tell you the status of  
each e-mail:  
View: open the selected item.  
Retrieve: retrieve one or all e-mails from the  
e-mail server.  
retrieved from the e-mail server  
retrieved e-mail with attachment.  
not retrieved  
Reply: send a reply to the sender or to all of the  
recipients.  
54  
     
Forward: forward the e-mail.  
Block address: add the sender’s e-mail address  
to the Blocked address list.  
Delete: delete the currently selected item.  
Delete all: delete all e-mails.  
Move to my folder: move the e-mail to the My  
folder box.  
Sort: sort the e-mails by size, subject, data, or  
senders’ e-mail addresses.  
Properties: display the properties of the e-mail.  
Block address: add the sender’s e-mail address  
to the Blocked address list.  
Viewing sent or saved e-mails  
1. From the Email menu, select Outbox Draft, or  
,
My folder  
.
Properties: display the properties of the e-mail.  
2. Select an e-mail.  
While viewing a header or e-mail, press <Options> to  
access the following options:  
While viewing the e-mail list, press <Options> to  
access the following options:  
Retrieve: retrieve one or all e-mails.  
View: open the e-mail.  
Open file: open the attached file.  
Send: send or resends the e-mail.  
Cancel: stop sending the e-mail.  
Edit: edit the e-mail.  
Save file: save the attached file in your phone’s  
memory.  
Reply: send a reply to the sender or to the sender  
and all of the recipients.  
Delete: delete the e-mail.  
Delete all: delete all e-mails.  
Forward: forward the e-mail.  
Delete: delete the e-mail.  
Sort: sort the e-mails by size, subject, data, or  
senders’ e-mail addresses.  
Cut address: extract e-mail addresses, URLs, and  
phone numbers.  
Properties: display the properties of the e-mail.  
55  
       
Menu functions  
While reading a message, press <Options> to access  
the following options:  
Delivery confirm: set the network to inform you  
when your e-mail has been delivered.  
Open file: open the attached file.  
Read confirm: send a request for a reply along  
with your e-mail.  
Save file: save the attached file in your phone’s  
memory.  
Priority: select the priority level of your e-mail.  
Cancel: stop sending the e-mail.  
Send: send or resent the e-mail.  
Edit: edit the e-mail.  
Include signature: attach your name, phone  
number, a simple memo, or tag line to your e-mail.  
Receive settings  
Check interval: determine how often the phone  
checks the server for incoming e-mails.  
Delete: delete the e-mail.  
Move to my folder: move the e-mail to the My  
folder box.  
If you set this option to Not used, you can use the  
Check new mail feature to check your e-mail  
manually.  
Properties: view the properties of the e-mail.  
Changing e-mail settings  
1. From the Email menu, select Settings  
Read reply: determine whether or not the phone  
sends a read-reply request.  
.
2. Select a setting category and change the settings.  
When this option is set to Announce, the phone  
reminds you to send a read-reply request with  
your e-mail address.  
Send settings  
Send copy to self: send a copy of your e-mail to  
your own e-mail address.  
Retrieve option: determine whether the phone  
retrieves headers only or the entire e-mail.  
56  
 
Delete option: determine whether e-mails are  
deleted immediately or the next time you connect  
to the server.  
User name: enter a name to be displayed as the  
sender’s name in your outgoing e-mails.  
Email address: enter your e-mail address.  
Reject if over: determine the maximum size for  
incoming e-mails. Your phone will reject e-mails  
that exceed the specified size.  
SMTP server: enter the IP address or domain  
name of the outgoing e-mail server.  
SMTP port: enter the SMTP port number.  
E-mail account  
Protocol type: select the protocol for the  
incoming e-mail server. The remaining options  
depend on the protocol type setting.  
Set up your e-mail account(s) and select the one to be  
used:  
When the protocol type is POP3  
:
You cannot change e-mail account settings while an  
e-mail is being sent or retrieved. Your e-mail  
service provider can give you the information  
needed for the below settings.  
POP3 server: enter the IP address or domain  
name of the server that receives your e-mail.  
POP3 port: enter the POP3 port number.  
APOP login: connect to the server by using the  
APOP login scheme when this option is selected.  
Current account: select an account.  
Account setting: configure up to five e-mail  
accounts using different e-mail servers. The  
following options are available for each account:  
User ID: enter your e-mail ID.  
Password: enter your e-mail password.  
Account name: enter a name for the currently  
selected account.  
When the protocol type is IMAP4  
:
IMAP4 server: enter the IP address or domain  
name of the server that receives your e-mail.  
In use: select this option to use the account and  
to display the account in the Inbox  
.
IMAP4 port: enter the IMAP4 port number.  
57  
 
Menu functions  
Retrieve headers: set the number of headers you  
will retrieve from the server.  
Password: enter the password.  
DNS1: enter the primary address.  
DNS2: enter the secondary address.  
Retrieve attachments: select this option to  
receive attachments with e-mails.  
Setting up the Blocked address list  
User ID: enter your e-mail ID.  
Password: enter your e-mail password.  
Email profile  
Use the Blocked address list to reject messages from  
e-mail addresses that you specify.  
1. From the Email menu, select Block address  
2. Enter an e-mail address you want to block.  
3. Add as many as ten e-mail addresses.  
.
You can configure the network settings required to  
send or receive e-mails.  
You cannot change e-mail profile settings while an  
e-mail is being sent or retrieved.  
4. Press <Options> and select Save  
.
Clearing e-mail boxes  
1. From the Email menu, select Delete all  
The following options are available:  
.
Current profile: select a profile.  
2. Press [  
cleared.  
] to check the message box(es) to be  
Profile settings: configure up to five e-mail  
profiles. For each profile, the following options are  
required to connect to the GPRS network:  
3. Press <Delete>.  
4. Press <Yes> to confirm the deletion.  
Profile name: enter a name for the e-mail profile.  
You cannot clear the Inbox or Outbox while an  
e-mail is being sent or retrieved.  
APN: enter the access point name used for the  
GPRS network address.  
Login ID: enter the User ID.  
58  
 
Connect to voice mail: connect to the voice  
server to allow you to listen to your messages. You  
can also connect to the voice mail server by  
Push messages (Menu 5.4)  
Use this menu to access messages from the WAP  
server.  
pressing and holding [1] in Idle mode.  
Inbox: view push messages you have received.  
Voice server number: change the voice mail  
server name or number.  
Settings: determine whether or not your phone  
receives push messages.  
Always: the phone receives push messages.  
Text template (Menu 5.6)  
Never: the phone rejects push messages.  
Use this menu to preset a maximum of ten frequently  
used messages.  
Optional: the phone receives push messages from  
the service centre set in this option.  
Adding a text template  
1. Select an empty location.  
Delete all: delete all of push messages.  
2. Enter the message and press [  
].  
Voice mail (Menu 5.5)  
Using template options  
Use this menu to store the number of the voice mail  
server and access your voice mails.  
From the template list, press <Options> to access  
the following options:  
You must enter the voice server number before you  
can access your voice mails. Your service provider  
can give the voice server number.  
Edit: add a template or change the selected one.  
Send message: send the template as an SMS or  
MMS message.  
Delete: delete the template.  
59  
         
Menu functions  
Broadcast messages (Menu 5.7)  
Memory status (Menu 5.8)  
The Cell Broadcast service delivers short messages on  
various topics such as the weather or traffic.  
Use this menu to view the memory status for text,  
multimedia, e-mail, or push messages.  
Use this menu to change the settings for the service  
and to access broadcast messages.  
Funbox (Menu 6)  
Read: open received messages.  
The Funbox menu allows you to access images,  
videos, voice memos, music files, and sounds stored in  
the phone’s memory.  
The Temporary box saves network messages until  
the phone is switched off.  
The Archive box saves network messages  
indefinitely. Press <Options> and select Save  
when a text notification appears to save to the  
Archive box.  
To access this menu, press <Menu> in Idle mode and  
select Funbox  
.
Images (Menu 6.1)  
Receive: enable or disable the reception of  
broadcast messages.  
This menu displays photos you have taken and images  
downloaded or received in messages.  
Channel: specify the channels from which you  
receive broadcast messages.  
Viewing an image  
1. Select an image folder, Photos  
,
My photos, or  
Language: select the language in which broadcast  
messages display.  
Downloaded images  
.
A list of images displays. For downloaded images,  
the icons tell you the status of the files:  
Please contact your service provider for details.  
you can forward to other people  
you are unable to forward to other people  
60  
           
2. Scroll to an image and press [  
].  
Music (Menu 6.3)  
Using image options  
This menu displays MP3 music files you have  
downloaded or imported from your computer.  
While viewing the image list or an image, press  
Options> to access the options. p. 72  
<
Playing a music file  
Scroll to a file and press [  
].p. 36  
Videos (Menu 6.2)  
Using music options  
This menu displays video clips you have recorded,  
downloaded, or received in messages.  
While viewing the music list, press <Options> to  
access the following options:  
Playing a video clip  
1. Select a video folder, Video clips  
Available options vary depending on whether or not  
playback is in progress.  
,
My video clips,  
or Downloaded videos  
.
Play/Pause: begin/pause playback.  
A list of videos displays. For downloaded videos,  
the icons tell you the status of the files:  
Send: send the currently selected file via e-mail,  
Bluetooth, or infrared port.  
you can forward to other people  
you are unable to forward to other people  
Add play list: add a file to the play list.  
2. Scroll to a video clip and press [  
].p. 73  
Open play list: go to the play list.  
Set as: set the file as your ring tone or as a caller  
alert melody for a Phonebook entry.  
Using video options  
While viewing the video list, press <Options> to  
access the options. p. 74  
Rename: change the file name.  
Delete: delete the file.  
61  
       
Menu functions  
Settings: change the default settings for playing  
files.  
A list of sound clips displays. For downloaded  
sounds, the icons tells you the status of the files:  
Repeat: select a repeat mode.  
Shuffle: select a playing order.  
Volume: select a volume level.  
you can forward to other people  
you are unable to forward to other people  
2. Scroll to a sound clip and press [  
].p. 38  
Lock volume key: lock [ / ] so that you can  
prevent an accidental press of the keys from  
affecting playback.  
Using sound options  
While viewing the sound list, press <Options> to  
access the options. p. 38  
Equalizer value: select an equalizer setting.  
Delete all: delete all of files.  
Memory status (Menu 6.5)  
Protection: protect the file from being deleted.  
Properties: display the properties of the file.  
You can check the total amount of memory for media  
items and the amount of memory currently in use in  
each media box.  
Sounds (Menu 6.4)  
Organiser (Menu 7)  
The Organiser feature enables you to keep track of  
your schedule and tasks, to view missed alarm events,  
and to make a memo.  
This menu displays the sound files you have recorded,  
downloaded, or received in messages.  
Playing a sound clip  
1. Select a sound folder, Voice list or Downloaded  
To access this menu, press <Menu> in Idle mode and  
sounds  
.
select Organiser  
.
62  
     
Preceding events: delete events on past dates.  
Month view (Menu 7.1)  
Delete all: delete all of scheduled events.  
Use this menu to keep track of your monthly schedule.  
Consulting the calendar  
You can schedule up to 400 events on the calendar,  
and schedule more than one event per day.  
When you select Month view to display the calendar,  
today’s date is marked with a red box.  
Entering a new scheduled event  
1. Select a date on the calendar.  
The number of events displays at the bottom of the  
calendar. The following icons indicate the type of  
event:  
2. Press <Options> and select Create  
or Miscellaneous  
Schedule  
.
3. Enter information or change the settings in the  
following entry fields:  
Scheduled events  
Tasks  
Anniversaries  
Miscellaneous events  
Subject: enter the title of the event.  
Details: enter event details.  
Press <Options> to access the following options:  
Start date and End date: enter the starting  
and ending dates for the event.  
Start time and End time: enter the starting  
and ending times for the event.  
AM/PM: select AM or PM in 12-hour time  
format.  
View: access the stored memo(s) for that date.  
Create: add a new event, anniversary,  
miscellaneous event, or task.  
Week view: switch to the week view screen.  
Go to today: access the current date.  
Go to date: enter a specific date.  
Location: (for Schedule) enter information  
about the event location.  
Delete: access the following deleting options:  
Selected date: delete items stored on the  
Alarm: set an alarm for the event.  
currently selected date.  
63  
   
Menu functions  
Before: set the time for the alarm.  
Alarm time: enter the time for the alarm to  
sound.  
AM/PM: select AM or PM in 12-hour time  
format.  
Alarm tone: select an alarm tone.  
Repeat: (for Schedule) set the event to recur,  
and set a repeat unit.  
Alarm tone: select an alarm tone.  
Repeat every year: you can set the phone to  
remind you of the anniversary every year.  
Until: (for Schedule) if the event will recur,  
set the ending date.  
4. Press <Save> to save the event.  
4. Press <Save> to save the event.  
Entering a new anniversary  
1. Select a date on the calendar.  
Entering a task  
1. Select a date on the calendar.  
2. Press <Options> and select Create  
2. Press <Options> and select Create  
Anniversary  
.
To do.  
3. Enter information or change the settings in the  
following entry fields:  
3. Enter information or change the settings in the  
following entry fields:  
Occasion: enter information about the  
anniversary.  
Date: enter the date.  
Alarm: set an alarm for the anniversary.  
Before: set the time for the alarm. Select day  
To do: enter information about the task.  
Start date: enter the starting date.  
Due date: enter the ending date.  
Priority: select a priority level.  
4. Press <Save> to save the event.  
or week  
.
64  
   
Viewing an event  
Week View (Menu 7.2)  
Square brackets on a calendar date indicate the  
following type of events scheduled for that day:  
Use this menu to view events for the selected week.  
The current date is marked in red. Blue boxes indicate  
scheduled events, and green boxes indicate  
miscellaneous events. Select the cell that contains the  
event you want.  
Blue: scheduled  
Red: task  
Orange: anniversary  
Green: miscellaneous event  
1. Select a date on the calendar to display the events  
for that day.  
Day view (Menu 7.3)  
2. Select an event to view its details.  
Use this menu to view events for the selected date.  
Select an event to view its details.  
3. Press <Options> to access the following options:  
View: access the selected event.  
Edit: edit the event.  
Send: send the event via SMS, MMS, e-mail,  
Bluetooth, or infrared port.  
Create: add a new event.  
Month view: switch to the month view screen.  
Week view: switch to the week view screen.  
Schedule (Menu 7.4)  
This menu displays the scheduled events. If you have  
set the Repeat and Alarm options, the  
are activated. Select an event to view its details.  
and  
icons  
Anniversary (Menu 7.5)  
Done/Undone: change the status of the  
This menu displays anniversaries you have created. If  
you have set the Repeat and Alarm options, the  
event.  
Delete: delete the event.  
Delete all: delete all of the events for the  
selected date.  
and  
details.  
icons are activated. Select an event to view its  
65  
         
Menu functions  
Viewing a missed event alarm  
Miscellaneous (Menu 7.6)  
1. From the Organiser menu, select Missed alarm  
This menu displays miscellaneous events you have  
events  
.
created. If you have set the Alarm option, the  
is activated. Select an event to view its details.  
icon  
2. Select an event.  
3. Press <Confirm> to confirm and delete the event.  
To do (Menu 7.7)  
Using missed alarm options  
Use this menu to display tasks you have created. The  
colours of status check boxes indicate the importance:  
From the event list, press <Options> to access the  
following options:  
Red  
!
for high priority  
View: access the event.  
Delete: delete the event.  
Delete all: delete all events.  
Blue for normal priority  
Grey for low priority.  
A check mark appears in the status check box if the  
task has been completed. The options you can use are  
the same as in Day view.  
Memo (Menu 7.9)  
Use this menu to create memos and view memos you  
have stored.  
Missed alarm events (Menu 7.8)  
Creating a new memo  
When you are unable to acknowledge an alarm, the  
phone displays a missed alarm notification.  
1. Press [  
].  
2. Enter the memo text and press [  
].  
Press <View> to view the corresponding event.  
66  
           
Viewing a memo  
• Do not take photos of people without their  
permission.  
Select a memo to view its details.  
• Do not take photos in a place where cameras are  
not allowed.  
• Do not take photos in a place where you may  
interfere with another person’s privacy.  
Using memo options  
From the memo list, press <Options> to access the  
following options:  
Edit: edit the memo.  
Create: add a new memo.  
Delete: delete the selected memo.  
Delete all: delete all memos.  
Take a photo (Menu 8.1)  
The camera produces JPEG photos.  
When you take a photo in direct sunlight or in bright  
conditions, shadows may appear on the photo.  
Memory status (Menu 7.10)  
Taking a photo  
1. If the phone is closed, open the phone.  
This menu displays the total amount of memory for  
the calendar, the number of events you have created,  
and the total number of events you can store.  
2. Press and hold [ ]. The image to be captured  
appears on the display.  
Camera (Menu 8)  
You can use the camera module embedded in your  
phone to take photos and record videos.  
3. Adjust the image by aiming the camera lens at the  
subject.  
Press the left soft key to use the camera  
options. p. 68  
Use the keypad to change the camera settings  
or switch to other modes. p. 69  
To access this menu, press <Menu> in Idle mode and  
select Camera, or press [ ].  
67  
           
Menu functions  
4. Press [ ] to take a photo. The photo is saved in  
Mosaic shot: take several stills and save them in  
one frame. Select the number of still images the  
camera will take.  
the Photos folder.  
Hold the phone still for one or two seconds after  
pressing the camera shutter key to allow the  
image data to process.  
Night shot: take a high quality photo in low  
lighting conditions.  
Automatic save: set the phone to automatically  
save a photo after taking the photo.  
5. To  
use photo options  
Press  
Effects: change the colour tone or apply a special  
effect to the photo.  
<Options>.p. 70  
delete the photo  
<Delete>.  
Frames: apply a decorative frame.  
return to Capture mode  
[C] or [  
].  
Timer: set a time delay before the camera takes a  
photo.  
Go to photo album: display the photos stored in  
the Photos or My photos folder.  
Using camera options in Capture mode  
In Capture mode, press the left soft key to access the  
following options:  
Settings: change the default settings for taking a  
photo.  
Shooting mode: take a photo in the following  
modes:  
Size: select an image size.  
Quality: select an image quality.  
Single shot: take a photo in the normal mode.  
Shutter sound: select the sound that you hear  
Multi shot: take a series of action stills. Select the  
number of photos the camera will take.  
when you press the shutter, [ ] or [  
].  
68  
 
Spot focus: adjust the exposure based on a  
specific area of the image. Select On to display the  
spot focus frame in the middle of the image, and  
change the exposure according to the brightness of  
the image fragment in the frame.  
Using the keypad in Capture mode  
You can use the keypad to customise your camera  
settings in Capture mode.  
Key  
Function  
ISO: change the ISO setting, which controls the  
sensitivity of your camera. For low light situations,  
lower the ISO number to increase the quality.  
Flips the image vertically.  
Shows the mirror image.  
Adjusts the brightness of the image.  
Left/  
Right  
The higher the ISO number, the faster the camera  
shutter functions and the more sensitive the  
camera is to light. Higher ISO settings may bring  
some distortion to an image.  
Up/  
Down  
Zooms in or out.  
Default name: change the default prefix of the  
photo name.  
1
2
3
4
5
Switches to Record mode.  
p. 70  
Changes the image size.  
Flash: turn the flash on or off.  
Changes the image quality.  
Changes the camera mode.  
Camera short cuts: view the functions of the  
keys you can use.  
Changes the colour tone or applies a special  
effect to the photo.  
6
Reduces the distortion on the image to  
maximise detail and sharpness.  
69  
 
Menu functions  
Properties: view the properties of the photo.  
Key  
7
Function  
Selects a decorative frame.  
Sets the timer.  
Record video (Menu 8.2)  
8
You can record a video of what is displayed on the  
camera screen and save it as a .3gp file.  
9
Shows the photos stored in the Photos or  
My photos folder.  
Recording a video  
0
Turns the flash on or off.  
1. Turn the camera on, and aim the lens at the  
subject. Adjust the image.  
Shows the real image size to be captured.  
Press the left soft key to use the camera  
options. p. 71  
Use the keypad to change the camera settings  
or switch to other modes. p. 71  
2. Press [ ] to start recording.  
Using photo options  
After saving a photo, press <Options> to access the  
following options:  
Take another: return to Capture mode.  
3. Press <Stop> or [ ]. The video is automatically  
Send: send the photo via MMS, e-mail, Bluetooth,  
or infrared port.  
saved in the Video clips folder.  
.
Set as: set the photo as your wallpaper or as a  
caller ID image for a Phonebook entry.  
4. To  
play back the video clip  
Press  
[
].  
Go to photo album: display the photos stored in  
the Photos or My photos folder.  
use the video options  
delete the video clip  
return to Record mode  
<
Options>.  
Delete>.  
].  
p. 72  
Rename: change the name of the photo.  
<
Protection: protect the photo from being deleted.  
[C  
70  
         
Flash: turn the flash on or off.  
Using camera options in Record mode  
Camcorder short cuts: view the functions of the  
keys you can use.  
In Record mode, press <Options> to access the  
following options:  
Effects: change the colour tone or apply a special  
effect to a video.  
Using the keypad in Record mode  
You can use the keypad to customise your camera  
settings in Record mode:  
Timer: set a time delay before the camera starts  
recording a video.  
Key  
Function  
Go to video album: display the video clips stored  
in the Video clips or My video clips folder.  
Flips the image vertically.  
Shows the mirror image.  
Adjusts the brightness of the image.  
Settings: change the following settings for  
recording a video:  
Left/  
Right  
Recording mode: select a video recording mode.  
Select Limit of MMS to record a video suitable for  
an MMS message.  
Up/  
Zooms in or out.  
Down  
Select Normal to record a video within the limit of  
the currently available memory.  
1
2
3
4
Switches to Capture mode.  
p. 67  
Size: select an image size.  
Changes the frame size.  
Quality: select an image quality.  
Audio rec.: record audio with a video clip.  
Changes the image quality.  
Changes the video recording mode.  
Default name: change the default prefix of the  
video name.  
71  
   
Menu functions  
Rename: change the name of the video clip.  
Key  
5
Function  
Protection: protect the video clip from being  
deleted.  
Changes the colour tone or applies a special  
effect to the photo.  
Properties: view the properties of the video clip.  
6
Reduces the distortion on the image to  
maximize detail and sharpness.  
Photos (Menu 8.3)  
7
8
9
Mutes or unmutes the audio.  
Sets the timer.  
Use this menu to access a list of photos you have  
taken.  
Viewing the photos  
Shows the video clips stored in the Video  
clips or My video clips folder.  
1. Scroll to a photo and press [  
].  
2. To go back to the photo list, press [  
] or Back.  
0
Turns the flash on or off.  
Using photos options  
Using video options  
Press <Options> to access the following options:  
Press <Options> after saving a video clip to access  
the following options:  
Available options vary depending on whether you  
are looking at the photo list or viewing a photo.  
Record another: return to Record mode.  
View: open the photo.  
Send: send the video clip via MMS, e-mail,  
Bluetooth, or infrared port.  
List: return to the photo list.  
Send: send the photo via MMS, e-mail, Bluetooth,  
or infrared port.  
Go to video album: move to the Video clips or  
My video clips folder.  
72  
       
Move to My photos: move the photo to the My  
photos folder.  
Video clips (Menu 8.5)  
Use this menu to access a list of videos you have  
recorded.  
Set as: set the photo as your wallpaper or as a  
caller ID image for a Phonebook entry.  
Playing a video clip  
Edit: access the following options:  
Scroll to a video clip and press [  
During playback:  
].  
Emoticons: add an emoticon to the photo. Select  
one and move it by pressing the Navigation keys.  
Use the following buttons on the display:  
Frames: select a decorative frame.  
Effects: change the colour tone or apply a special  
effect to the photo.  
Buttons  
Function  
Pauses  
Slide show: set all photos to display as a slide  
show. You can select a time interval between  
photos.  
Resumes  
Stops  
Rename: change the name of the photo.  
Delete: delete the photo.  
Skips backward through a file  
Skips forward through a file  
Repeats the file  
Delete all: delete all of photos.  
Protection: protect the photo from being deleted.  
Properties: view the properties of the photo.  
To select a button, press [Left] or [Right] to  
highlight it and press [ ].  
Press [ / ] to adjust the volume.  
My photos (Menu 8.4)  
Use this menu to view photos you have moved from  
the Photos folder.  
73  
           
Menu functions  
Using video options  
Settings (Menu 9)  
Use this menu to customise your phone settings. You  
can also reset the settings to their default values.  
Press <Options> to access the following options:  
Play: play the video clip.  
Send: send the video clip via MMS, e-mail,  
Bluetooth, or infrared port.  
To access this menu, press <Menu> in Idle mode and  
select Settings  
.
Move to My video clips: move the video clip to  
the My video clips folder.  
Time & Date (Menu 9.1)  
Rename: change the name of the video clip.  
Use this menu to change the time and date displayed  
on your phone. Before setting the time and date,  
Delete: delete the video clip.  
specify your time zone in the World time menu.  
p.  
Delete all: delete all video clips. This option  
appears on the video clip list.  
39  
Set time: enter the current time using the number  
keys.  
Protection: protect the video clip from being  
deleted.  
AM/PM: select AM or PM in 12-hour time format.  
Properties: view the properties of the video clip.  
Time format: select 12-hour or 24-hour time  
My video clips (Menu 8.6)  
format.  
Set date: enter the current date using the number  
keys.  
Use this menu to access video clips you have moved  
from the Video clips folder.  
Date format: select a date format.  
74  
             
Short cut (Menu 9.2.4)  
Phone settings (Menu 9.2)  
You can use the Navigation keys as shortcut keys to  
access specific menus directly from Idle mode. Use  
this menu to change these shortcut assignments.  
Many different features of your phone’s system can be  
customised to suit your preferences.  
Language (Menu 9.2.1)  
Assigning a shortcut to a key  
Use this menu to select one of several languages for  
the display text.  
1. Select the key to be used as a shortcut key.  
2. Scroll to the menu that will be assigned to the key.  
3. Press <Save>.  
Greeting message (Menu 9.2.2)  
Use this menu to enter the greeting that is displayed  
briefly when the phone is switched on.  
Using shortcut options  
Press <Options> to access the following options:  
Slide settings (Menu 9.2.3)  
Change: change a shortcut menu.  
Use this menu to set how the phone reacts when you  
open it for an incoming call, and when you close it  
while using a function.  
Remove: deactivate the shortcut assignment to  
the selected key.  
Remove all: deactivate all shortcut assignments.  
Up: set whether or not to answer a call by opening  
the phone.  
Extra settings (Menu 9.2.5)  
Down: set whether or not the phone maintains  
the menu you are using when you close the phone.  
You can turn the automatic redialing or answering  
features on or off.  
When you set Down to Continue operation, the  
keypad lock works only in Idle mode.  
Auto redial: set the phone to make up to ten  
attempts to redial a phone number after an  
unsuccessful call.  
75  
               
Menu functions  
Anykey answer: answer an incoming call by  
pressing any key, except [ ] or <Reject>.  
Text display (Menu 9.3.2)  
You can change the display settings for the text  
displayed on the idle screen.  
When this option is set to Off, you must press [  
or <Accept> to answer a call.  
]
Text position: select a position. If you do not  
want text to display in Idle mode, select Off  
Voice clarity: removes extraneous noise and  
.
increases call quality so that the person with whom  
you are speaking can hear you clearly even if you  
are in a noisy place.  
Text style: select a style.  
Text colour: select a colour.  
Skin (Menu 9.3.3)  
Display settings (Menu 9.3)  
You can select a skin colour pattern for Menu mode.  
Use this menu to change settings for the display and  
light.  
LCD brightness (Menu 9.3.4)  
You can adjust the brightness of the display for  
varying lighting conditions.  
Wallpaper (Menu 9.3.1)  
You can change the background image that is  
displayed in Idle mode.  
Backlight (Menu 9.3.5)  
You can select the length of time the backlight and the  
display stay on.  
Select an image from the following image categories.  
Default wallpapers: select one of preset images.  
On: select the length of time the backlight is on at  
times of inactivity.  
Photos: select one of the photos you have taken.  
My photos: select one of the photos stored in the  
My photos folder.  
Dim: select the length of time the display is in  
Dimming mode after the backlight turns off. After a  
specified time, the display turns off and the clock  
displays.  
Downloaded images: select one of the images  
you have downloaded.  
76  
       
Message tone (Menu 9.4.3)  
Sound settings (Menu 9.4)  
Use this menu to set up the ringer for incoming SMS  
messages, MMS messages, and e-mails.  
Use this menu to customise various sound settings.  
Incoming call (Menu 9.4.1)  
Tone: select one of several message tones.  
Use this menu to select a volume level and alert type  
for incoming calls.  
Alert type: specify how you are informed of any  
incoming messages.  
Ring tone: select a ring tone for the call ringer.  
Repetition: specify how often the phone informs  
you of a new message.  
Volume: select a ringer volume.  
Alert type: specify how you are to be informed of  
incoming calls.  
Power on/off (Menu 9.4.4)  
Use this menu to select the melody that the phone  
sounds when it is switched on or off.  
Melody: the phone rings using the selected ring  
tone.  
Slide tone (Menu 9.4.5)  
Vibration: the phone vibrates but not rings.  
Use this menu to select the tone that the phone  
sounds when you open or close the phone.  
Vibration then melody: the phone vibrates three  
times and then starts ringing.  
Quiet mode (Menu 9.4.6)  
Keypad tone (Menu 9.4.2)  
Use this menu to set how the phone acts to alert you  
to a specific event in Quiet mode, instead of making  
sounds.  
Use this menu to select the tone that the phone  
sounds when you press a key.  
You can adjust the keypad tone volume using [ / ]  
in Idle mode.  
Vibration: set the phone to vibrate.  
Mute: mute all sound settings.  
77  
                     
Menu functions  
1. Select a call diverting option:  
Extra tones (Menu 9.4.7)  
Divert always: divert all calls.  
Busy: divert calls when you are on another  
call.  
No reply: divert calls when you do not answer  
the phone.  
Unreachable: divert calls when you are not in  
an area covered by your service provider or  
when your phone is switched off.  
Cancel all: cancel all call diverting options.  
Use this menu to customise additional tones for the  
phone.  
Minute minder: set the phone to beep every  
minute during an outgoing call to keep you  
informed of the length of your call.  
Connection tone: set the phone to beep when it  
is connected to the system.  
Alerts on call: set the phone to beep when you  
receive a new message or when the time for an  
alarm comes during a call.  
2. Select the type of calls to be diverted.  
3. To activate call diverting, select Activate  
.
Indicative tones: set the phone to beep when a  
pop-up window displays.  
Otherwise, select Deactivate  
.
4. Move to the Divert to line.  
Network services (Menu 9.5)  
5. Enter the number to which calls are to be diverted  
Use this menu to access network services. Please  
contact your service provider to check their availability  
and subscribe to them, if you wish.  
and press <OK>.  
6. If you selected No reply, move to the Sec line and  
select the length of time the network delays before  
diverting a call.  
Call diverting (Menu 9.5.1)  
This network service reroutes incoming calls to a  
phone number that you specify.  
78  
           
4. Enter the call barring password supplied by your  
Call barring (Menu 9.5.2)  
service provider and press <OK>.  
This network service allows you to restrict your calls.  
1. Select a call barring option:  
Call waiting (Menu 9.5.3)  
All outgoing: prohibit all outgoing calls.  
International: prohibit international calls.  
International except to home: only allow  
calls to numbers within the current country  
when you are abroad, and to your home  
country, defined as where your home network  
provider is located.  
All incoming: prohibit incoming calls.  
Incoming while abroad: prohibit incoming  
calls when you use your phone outside of your  
home country.  
This network service informs you when someone is  
trying to reach you while you are on another call.  
1. Select the type of calls to which the call waiting  
option will apply.  
2. Press <Activate>. To deactivate call waiting,  
press <Deactivate>.  
Network Selection (Menu 9.5.4)  
This network service allows you to either automatically  
or manually select the network used when roaming  
outside of your home area.  
Cancel all: cancel all call barring settings,  
allowing to be sent and received normally.  
Change barring password: change the call  
barring password obtained from your service  
provider.  
You can select a network other than your home  
network only if there is a valid roaming agreement  
between the two.  
Automatic: connect to the first available network  
when roaming.  
2. Select the type of calls to be barred.  
Manual: select the network you want.  
3. Press <Activate>. To deactivate call barring,  
press <Deactivate>.  
79  
           
Menu functions  
When you select a new band, your phone  
automatically searches for all available networks. Your  
phone registers with a preferred network within the  
band.  
Caller ID (Menu 9.5.5)  
This network service allows you to prevent your phone  
number from being displayed on the phone of the  
person being called. However, some networks do not  
allow the user to change this setting.  
Active line (Menu 9.5.7)  
Default: use the default setting provided by the  
network.  
Some SIM cards may be used with two subscriber  
numbers. If your SIM card supports it, use this menu  
to select the line that is used to make calls. Calls can  
be answered on both lines, regardless of the selected  
line.  
Hide number: ensure your number does not  
display on the other person’s phone.  
Send number: send your number each time you  
make a call.  
Connectivity (Menu 9.6)  
Band selection (Menu 9.5.6)  
Use this menu to activate the IrDA port or the  
Bluetooth feature.  
For the phone to make and receive phone calls, it  
must register with an available network.  
You cannot use the Bluetooth and IrDA features  
while using multimedia features such as voice  
recorder, camera, and MP3 player, or vice versa.  
Your phone can handle any of the following types of  
networks: GSM 1900, Combined GSM 900/1800, and  
GSM 900/1800/1900.  
Bluetooth (Menu 9.6.1)  
The country where you purchased your phone  
determines the default band that it uses. When you  
travel abroad, you must remember to change to an  
appropriate band.  
Using Bluetooth wireless, you can connect the phone  
wirelessly to other Bluetooth devices and exchange  
data with them, talk hands-free, or control the phone  
remotely.  
80  
             
Bluetooth technology allows free wireless connections  
between all Bluetooth-compliant devices within a  
range of 10 metres. Since the devices communicate  
using radio waves, they do not need to be in line of  
sight to each other.  
Searching for and pairing with a Bluetooth  
device  
1. From the Bluetooth setting options, select My  
devices  
.
2. Select Search new device  
.
Setting up the Bluetooth feature  
If you have searched for devices before, the phone  
displays More devices along with the devices you  
have searched for previously. To search for new  
The Bluetooth menu provides the following options:  
Activation: activate or deactivates the Bluetooth  
feature.  
devices, select More devices  
.
After searching, a list of devices to which you can  
connect displays. The following icons indicate the  
kind of device:  
My devices: search for connectable Bluetooth  
devices.  
p. 81  
My phone’s visibility: allow other Bluetooth  
devices to connect to your phone.  
Hands-free or headset  
Mobile phone  
Computer  
PDA  
Unknown device  
My phone’s name: assign a Bluetooth device  
name to your phone, which is then displayed on  
other devices.  
Secure mode: determine if the phone asks for  
your confirmation when other devices access your  
data.  
The colour of the icon indicates the status of the  
device:  
Grey for unpaired devices  
Blue for paired devices  
Bluetooth services: display available Bluetooth  
services.  
81  
   
Menu functions  
Red for devices that are currently connected to  
your phone  
Authorise device/Unauthorise device:  
determine if the phone asks you to permit  
connection when other devices try to connect to  
your phone.  
3. Select a device.  
4. Enter a Bluetooth PIN code of up to 16 digits and  
press <OK>. This code is used just once and you  
don’t need to memorise it.  
Delete: delete the device.  
Delete all: delete all devices.  
When the owner of the other device enters the  
same code, pairing is finished.  
Sending data via Bluetooth  
1. Activate the Bluetooth feature.  
2. Select the application in which the item you want  
to send is stored.  
Some devices, especially headsets or hands-free  
car kits, may have a fixed Bluetooth PIN, such as  
0000. If the other device has one, you must enter  
the code.  
3. Scroll to the item you want and press <Options>.  
4. Select Send  
via Bluetooth.  
Using device options  
The phone searches for devices within range and  
displays a list of available devices.  
From the device list, press <Options> to access the  
following options:  
5. Select a device.  
Connect: connect to the currently selected device.  
You need to enter the Bluetooth PIN.  
6. If necessary, enter the Bluetooth PIN needed for  
pairing and press <OK>.  
Disconnect: end the connection with the device.  
Receiving data via Bluetooth  
Browse files: search for data from the device and  
import data directly to your phone.  
To receive data via Bluetooth, your phone’s Bluetooth  
feature must be active.  
Rename: rename the paired device.  
82  
   
If an unauthorised Bluetooth device sends data to your  
phone, the phone displays a confirmation message. To  
receive data, press <Yes>.  
Security (Menu 9.7)  
Use this menu to protect the phone against  
unauthorised use by managing the several access  
codes of your phone and SIM card.  
Infrared (Menu 9.6.2)  
Use this feature to send and receive data through the  
infrared port. To use an infrared connection, you must  
do the following:  
If you enter an incorrect PIN /PIN 2 three times in  
succession, the SIM card is blocked. To unblock it  
you need to enter your PUK/PUK2 (Personal  
Unblocking Key). The codes are supplied by your  
network operator.  
Configure and activate an IrDA-compliant infrared  
port on the other device.  
Activate the infrared feature on your phone (the  
PIN check (Menu 9.7.1)  
IrDA icon  
displays on the top line).  
The 4-to 8-digit PIN (Personal Identification Number)  
protects your SIM card against unauthorised use.  
When this feature is enabled, the phone requires your  
PIN each time it is switched on.  
Align the IrDA port on the  
phone with the IrDA port on  
the other device.  
If there is no communication  
between your phone and the  
other IrDA-compliant device  
within 60 seconds of activating  
the feature, it is automatically  
deactivated.  
Change PIN (Menu 9.7.2)  
Use this menu to change your PIN. The PIN Check  
feature must be enabled to use this feature.  
Phone Lock (Menu 9.7.3)  
The Phone Lock feature locks the phone from  
unauthorised use.  
83  
       
Menu functions  
When this feature is enabled, you must enter a 4- to  
8-digit phone password each time the phone is  
switched on.  
SIM Lock (Menu 9.7.6)  
The SIM Lock feature allows your phone to work only  
with the current SIM by assigning a SIM lock code. You  
must enter the SIM lock code to use a different SIM  
card.  
The password is preset to 00000000. To change the  
password, use the Change password menu.  
FDN mode (Menu 9.7.7)  
Change Password (Menu 9.7.4)  
If supported by your SIM card, Fixed Dialing Number  
(FDN) mode restricts your outgoing calls to a limited  
set of phone numbers. When this feature is enabled,  
you can make calls only to phone numbers stored in  
Phonebook. To use this feature, you must enter your  
PIN2.  
Use this menu to change your phone password. The  
password is preset to 00000000  
.
Privacy (Menu 9.7.5)  
Use this menu to lock your media contents, including  
MMS messages, e-mails, images, videos, music files,  
and sounds.  
Change PIN2 (Menu 9.7.8)  
1. Press [  
] to check the item(s) to lock.  
If supported by your SIM card, the Change PIN2  
feature changes your current PIN2.  
2. Press <Save> to lock the marked items.  
3. Enter the phone password and press <OK>.  
Memory status (Menu 9.8)  
To access a locked item, you need to enter the phone  
password.  
Use this menu to check the amount of memory being  
used for storing data in Shared Memory  
,
Messages,  
Funbox Organiser Phonebook, and Java world.  
,
,
84  
                 
Reset settings (Menu 9.9)  
Solve problems  
Help and personal needs  
Use this menu to reset the phone settings, display  
settings, and sound settings individually. You can also  
reset all the settings in your phone at the same time.  
To save the time and expense of an unnecessary  
service call, perform the simple checks in this section  
before contacting a service professional.  
1. Press [  
be reset.  
] to check the setting category(ies) to  
2. Press <Reset> to reset the marked items.  
3. Enter the phone password and press <OK>.  
The password is preset to 00000000. You can  
When you switch on your phone, the following  
messages may appear:  
“Insert SIM”  
change this password  
p. 84  
Be sure that the SIM card is correctly installed.  
“Phone lock”  
The automatic locking function has been enabled.  
You must enter the phone’s password before you  
can use the phone.  
“Enter PIN”  
You are using your phone for the first time. You  
must enter the PIN supplied with the SIM card.  
The PIN Check feature is enabled. Every time the  
phone is switched on, the PIN has to be entered.  
To disable this feature, use the PIN check menu.  
85  
         
Solve problems  
“Enter PUK”  
Your correspondent cannot reach you  
The PIN code has been entered incorrectly three  
times in succession, and the phone is now blocked.  
Enter the PUK supplied by your service provider.  
Be sure your phone is switched on. ([ ] pressed  
for more than one second.)  
Be sure you are accessing the correct cellular  
network.  
“No Service,” “Network Failure,” or “Not  
Done” displays  
Be sure that you have not set an outgoing call  
barring option.  
The network connection has been lost. You may be  
in a weak signal area. Move and try again.  
Your correspondent cannot hear you speaking  
You are trying to access an option for which you  
have no subscription with your service provider.  
Contact the service provider for further details.  
Be sure you have switched off the microphone.  
Be sure you are holding the phone close enough to  
your mouth. The microphone is located at the  
bottom of the phone.  
You have entered a number but it was not  
dialled  
The phone starts beeping and “Battery low”  
flashes on the display  
Be sure that you have pressed [ ].  
Be sure you have accessed the right cellular  
network.  
Your battery is insufficiently charged. Recharge the  
battery.  
Be sure that you have not set an outgoing call  
barring option.  
The audio quality of the call is poor  
Check the signal strength indicator on the display  
). The number of bars indicates the signal  
strength from strong ( ) to weak ( ).  
(
86  
Try moving the phone slightly or moving closer to a  
window if you are in a building.  
Health and safety information  
SAR certification information  
No number is dialled when you re-call a  
Contacts entry  
This phone meets European Union (EU) requirements  
concerning exposure to radio waves.  
Use the Contact Search feature to ensure the  
number has been stored correctly.  
Your mobile phone is a radio transmitter and receiver. It is  
designed and manufactured to not exceed the limits for  
exposure to radio-frequency (RF) energy, as  
Re-store the number, if necessary.  
If the above guidelines do not help you to  
solve the problem, take note of:  
recommended by the EU Council. These limits are part of  
comprehensive guidelines and establish permitted levels  
of RF energy for the general population. The guidelines  
were developed by independent scientific organisations  
through the periodic and thorough evaluation of scientific  
studies. The limits include a substantial safety margin  
designed to ensure the safety of all persons, regardless of  
age and health.  
The model and serial numbers of your phone  
Your warranty details  
A clear description of the problem  
Then contact your local dealer or Samsung after-sales  
service.  
The exposure standard for mobile phones employs a unit  
of measurement known as Specific Absorption Rate (SAR).  
The SAR limit recommended by the EU Council is 2.0W/  
kg.*  
The highest SAR value for this model phone was 0.310 W/  
kg.  
87  
   
Health and safety information  
SAR tests are conducted using standard operating  
positions with the phone transmitting at its highest  
certified power level in all tested frequency bands.  
Although the SAR is determined at the highest certified  
power level, the actual SAR level of the phone while  
operating can be well below the maximum value. This is  
because the phone is designed to operate at multiple  
power levels so as to use only the power required to reach  
the network. In general, the closer you are to a base  
station, the lower the power output of the phone.  
Precautions when using batteries  
Never use a charger or battery that is damaged in any  
way.  
Use the battery only for its intended purpose.  
If you use the phone near the network’s base station,  
it uses less power. Talk and standby time are greatly  
affected by the signal strength on the cellular network  
and the parameters set by the network operator.  
Battery charging time depends on the remaining  
battery charge, the type of battery, and the charger  
used. The battery can be charged and discharged  
hundreds of times, but it will gradually wear out. When  
the operation time is noticeably shorter than normal, it  
is time to buy a new battery.  
Before a new model phone is available for sale to the  
public, compliance with the European R&TTE Directive  
must be shown. This directive includes as one of its  
essential requirements the protection of the health and  
safety of the user and any other person.  
If left unused, a fully charged battery will discharge  
itself over time.  
Use only Samsung-approved batteries, and recharge  
your battery only with Samsung-approved chargers.  
Disconnect the charger from the power source when it  
is not in use. Do not leave the battery connected to a  
charger for more than a week, since overcharging may  
shorten its life.  
*
The SAR limit for mobile phones used by the public is 2.0  
watts/kilogram (W/kg) averaged over ten grams of body tis-  
sue. The limit incorporates a substantial margin of safety to  
give additional protection for the public and to account for any  
variations in measurements. The SAR values may vary,  
depending on national reporting requirements and the network  
band.  
88  
 
Extreme temperatures will affect the charging capacity  
of your battery: it may require cooling or warming  
first.  
Do not leave the battery in hot or cold places because  
the capacity and lifetime of the battery will be  
reduced. Try to keep the battery at room temperature.  
A phone with a hot or cold battery may not work  
temporarily, even when the battery is fully charged. Li-  
ion batteries are particularly affected by temperatures  
below 0°C (32°F).  
Road safety  
Your wireless phone gives you the powerful ability to  
communicate by voice, almost anywhere, anytime. But an  
important responsibility accompanies the benefits of  
wireless phones, one that every user must uphold.  
When driving a car, driving is your first responsibility.  
When using your wireless phone while driving, follow local  
regulations in the country or region you are in.  
Do not short-circuit the battery. Accidental short-  
circuiting can occur when a metallic object like a coin,  
clip or pen causes a direct connection between the +  
and – terminals of the battery (metal strips on the  
battery). For example, do not carry a spare battery in  
a pocket or bag where the battery may contact metal  
objects. Short-circuiting the terminals may damage  
the battery or the object causing the short-circuiting.  
Operating environment  
Remember to follow any special regulations in force in the  
area you are in, and always switch off your phone  
whenever it is forbidden to use it, or when it may cause  
interference or danger.  
When connecting the phone or any accessory to another  
device, read its user’s guide for detailed safety  
instructions. Do not connect incompatible products.  
Dispose of used batteries in accordance with local  
regulations. Always recycle. Do not dispose of  
batteries in a fire.  
As with other mobile radio transmitting equipment, users  
are advised that for the satisfactory operation of the  
equipment and for the safety of personnel, it is  
recommended that the equipment should only be used in  
the normal operating position (held to your ear with the  
antenna pointing over your shoulder).  
89  
 
Health and safety information  
Other medical devices  
Electronic devices  
If you use any other personal medical devices, consult the  
manufacturer of your device to determine if it is  
adequately shielded from external RF energy.  
Most modern electronic equipment is shielded from radio  
frequency (RF) signals. However, certain electronic  
equipment may not be shielded against the RF signals  
from your wireless phone. Consult the manufacturer to  
discuss alternatives.  
Your physician may be able to assist you in obtaining this  
information.  
Switch off your phone in health care facilities when  
regulations posted in these areas instruct you to do so.  
Pacemakers  
Pacemaker manufacturers recommend that a minimum  
distance of 15 cm (6 inches) be maintained between a  
wireless phone and a pacemaker to avoid potential  
interference with the pacemaker. These recommendations  
are consistent with the independent research and  
recommendations of Wireless Technology Research. If you  
have any reason to suspect that interference is taking  
place, switch off your phone immediately.  
Vehicles  
RF signals may affect improperly installed or inadequately  
shielded electronic systems in motor vehicles. Check with  
the manufacturer or its representative regarding your  
vehicle.  
You should also consult the manufacturer of any  
equipment that has been added to your vehicle.  
Hearing aids  
Posted facilities  
Some digital wireless phones may interfere with some  
hearing aids. In the event of such interference, you may  
wish to consult your hearing aid manufacturer to discuss  
alternatives.  
Switch off your phone in any facility where posted notices  
require you to do so.  
90  
Potentially explosive environments  
Emergency calls  
Switch off your phone when in any area with a potentially  
explosive atmosphere, and obey all signs and instructions.  
Sparks in such areas could cause an explosion or fire  
resulting in bodily injury or even death.  
This phone, like any wireless phone, operates using radio  
signals, wireless, and landline networks as well as user-  
programmed functions, which cannot guarantee  
connection in all conditions. Therefore, you should never  
rely solely on any wireless phone for essential  
Users are advised to switch off the phone while at a  
refuelling point (service station). Users are reminded of  
the need to observe restrictions on the use of radio  
equipment in fuel depots (fuel storage and distribution  
areas), chemical plants, or where blasting operations are  
in progress.  
communications like medical emergencies.  
To make or receive calls, the phone must be switched on  
and in a service area with adequate signal strength.  
Emergency calls may not be possible on all wireless phone  
networks or when certain network services and/or phone  
features are in use. Check with local service providers.  
Areas with a potentially explosive atmosphere are often  
but not always clearly marked. They include the areas  
below decks on boats, chemical transfer or storage  
facilities, vehicles using liquefied petroleum gas, such as  
propane or butane, areas where the air contains chemicals  
or particles, such as grain, dust or metal powders, and any  
other area where you would normally be advised to turn  
off your vehicle engine.  
To make an emergency call:  
1. Switch on the phone.  
2. Key in the emergency number for your present  
location. Emergency numbers vary by location.  
3. Press [ ].  
Certain features like Call Barring may need to be  
deactivated before you can make an emergency call.  
Consult this document and your local cellular service  
provider.  
91  
 
Health and safety information  
Other important safety information  
Care and maintenance  
Only qualified personnel should service the phone or  
install the phone in a vehicle. Faulty installation or  
service may be dangerous and may invalidate any  
warranty applicable to the device.  
Check regularly that all wireless phone equipment in  
your vehicle is mounted and operating properly.  
Do not store or carry flammable liquids, gases, or  
explosive materials in the same compartment as the  
phone, its parts, or accessories.  
For vehicles equipped with an air bag, remember that  
an air bag inflates with great force. Do not place  
objects, including installed or portable wireless  
equipment, in the area over the air bag or in the air  
bag deployment area. Improperly installed wireless  
equipment could result in serious injury if the air bag  
inflates.  
Switch off your phone before boarding an aircraft. It is  
dangerous and illegal to use wireless phones in an  
aircraft because they can interfere with the operation  
of the aircraft.  
Failure to observe these instructions may lead to the  
suspension or denial of telephone services to the  
offender, or legal action, or both.  
Your phone is a product of superior design and  
craftsmanship and should be treated with care. The  
suggestions below will help you fulfill any warranty  
obligations and allow you to enjoy this product for many  
years.  
Keep the phone and all its parts and accessories out of  
the reach of small children.  
Keep the phone dry. Precipitation, humidity, and  
liquids contain minerals that corrode electronic  
circuits.  
Do not use the phone with a wet hand. Doing so may  
cause an electric shock to you or damage to the  
phone.  
Do not use or store the phone in dusty, dirty areas, as  
its moving parts may be damaged.  
Do not store the phone in hot areas. High  
temperatures can shorten the life of electronic  
devices, damage batteries, and warp or melt certain  
plastics.  
Do not store the phone in cold areas. When the phone  
warms up to its normal operating temperature,  
moisture can form inside the phone, which may  
damage the phone’s electronic circuit boards.  
92  
 
Do not drop, knock, or shake the phone. Rough  
handling can break internal circuit boards.  
Do not use harsh chemicals, cleaning solvents, or  
strong detergents to clean the phone. Wipe it with a  
soft cloth slightly dampened in a mild soap-and-water  
solution.  
Do not paint the phone. Paint can clog the device’s  
moving parts and prevent proper operation.  
Do not put the phone in or on heating devices, such as  
a microwave oven, stove, or radiator. The phone may  
explode when overheated.  
Use only the supplied or an approved replacement  
antenna. Unauthorised antennas or modified  
accessories may damage the phone and violate  
regulations governing radio devices.  
If the phone, battery, charger, or any accessory is not  
working properly, take it to your nearest qualified  
service facility. The personnel there will assist you, and  
if necessary, arrange for service.  
93  
Connection tone • 78  
Conversion • 40  
Creating messages  
e-mail • 53  
MMS • 48  
SMS • 45  
Creating organiser  
anniversaries • 64  
events • 63  
language • 75  
settings • 76  
Diverting, calls • 78  
DTMF tones, send • 27  
C
Index  
A
ABC mode, text input • 21  
Active line • 80  
Alarm • 39  
Calculator • 40  
Call costs • 30  
Call records  
dialled • 29  
E
missed • 29  
received • 29  
Call time • 29  
Caller group  
creating • 32  
managing • 32  
Caller ID • 80  
Calls  
answering • 24  
barring • 79  
diverting • 78  
holding • 25  
redialling • 23  
rejecting • 24  
waiting • 79  
Camera  
E-mails  
Answering  
creating/sending • 53  
deleting • 55  
setting • 56  
call • 24  
second call • 26  
Anykey answer • 76  
Auto redial • 75  
memos • 66  
tasks • 64  
viewing • 54, 55  
Emergency calls • 91  
D
B
F
Deleting  
Backlight time, set • 76  
Band selection • 80  
Barring, calls • 79  
Battery  
FDN (Fixed Dialling Number)  
mode • 84  
Forwarding  
e-mails • 54  
MMS messages • 50  
Funbox • 60  
call records • 28  
e-mails • 55  
events • 65  
memos • 67  
charging • 7  
missed alarms • 66  
MMS messages • 49, 50  
phonebook 33  
photos • 73  
low indicator • 8  
precautions • 88  
Bluetooth  
G
receiving, data • 82  
sending, data • 82  
settings • 81  
Games • 34  
Greeting message • 75  
photos • 67  
videos • 70  
SMS messages • 46  
video clips • 74  
Delivery reports, message •  
47, 51  
Dialled calls • 29  
Display  
CB (Cell Broadcast) messages •  
60  
Characters, enter • 21  
Conference call • 27  
H
Broadcast messages • 60  
Browser, WAP • 42  
Health and safety • 87  
Holding, call • 25  
94  
 
downloaded items • 62  
phonebook 34  
scheduled events • 67  
unpacking • 6  
Phonebook  
I
N
Icons, description • 10  
Images, downloaded • 60  
Inbox, messages  
e-mail • 54  
Names  
copying • 31  
deleting • 33  
editing • 31  
managing • 33  
options • 31  
entering • 21  
searching • 30  
Message tone • 77  
Messages  
cell broadcast • 60  
Network band, select • 80  
Network selection • 79  
Network services • 78  
MMS • 49  
SMS • 45  
e-mail • 53  
greeting • 75  
MMS • 48  
SMS • 45  
voice • 59  
speed-dialling • 32  
Infrared, connect • 83  
International calls • 23  
Internet • 42  
O
Photos  
Organiser • 62  
Outbox, messages  
e-mail • 55  
MMS • 50  
deleting • 73  
taking • 67  
viewing • 72  
K
web • 59  
Key tone volume • 77  
Keypad tones  
selecting • 77  
sending • 26  
Minute minder • 78  
missed alarm events • 66  
Missed calls • 29  
MMS messages  
creating/sending • 48  
deleting • 49, 50  
setting • 51  
viewing • 49, 50  
MP3 player • 36  
Multi-party calls • 27  
Music, downloaded • 61  
Muting  
PIN, change • 83  
PIN2, change • 84  
Power on/off tone • 77  
Privacy • 84  
SMS • 46  
Own number • 33  
P
Problems, solve • 85  
L
Password  
Language, select • 75  
Last number, redial • 23  
Locking  
call barring • 79  
phone • 84  
Phone  
R
Received calls • 29  
Received messages  
e-mail • 54  
media contents • 84  
phone • 83  
SIM card • 84  
care and maintenance •  
92  
display • 10  
icons • 10  
locking • 83  
password • 84  
resetting • 85  
switching on/off • 8  
MMS • 49  
SMS • 45  
Recording  
videos • 70  
voice memos • 38  
Redialling  
Loudspeaker • 25  
Low battery indicator • 8  
key tones • 26  
microphone • 26  
My name card • 33  
M
Memory status  
camera • 60  
automatically • 75  
95  
Index  
manually • 23  
Resetting phone • 85  
Ringer  
incoming calls • 77  
messages • 77  
Road safety • 89  
Roaming • 79  
Stopwatch • 41  
Switching on/off  
playing • 38  
recording • 38  
Voicemail server • 59  
microphone • 26  
phone • 8  
W
T
Waiting call • 79  
WAP browser  
access • 42  
bookmarks • 43  
cache, clear • 43  
World time • 39  
Templates  
MMS • 51  
S
text • 59  
Text input mode, change • 21  
Text, enter • 21  
Timer • 41  
Safety  
information • 87  
Security, calls • 83  
Sent messages  
e-mail • 55  
Tone  
connect • 78  
MMS • 49, 50  
SMS • 46  
SIM card  
keypad • 77  
message • 77  
minute minder • 78  
power on/off • 77  
slide • 77  
inserting • 7  
locking • 84  
Slide settings • 75  
SMS messages  
creating/sending • 45  
deleting • 46  
setting • 47  
viewing • 45, 46  
Sound settings • 77  
Sounds, downloaded • 62  
Speed-dial • 32  
V
Videos  
deleting • 74  
playing • 73  
recording • 70  
Voice clarity, microphone • 26  
Voice mail • 59  
Voice memos  
96  
M

TRENDnet TFM PCIV92 User Manual
Teac CD Player CD Recorder User Manual
Sony Ericsson T300 User Manual
Seagate CONSTELLATION ES2 SERIAL ATA ST33000650NS User Manual
Samsung Spinpiont F3 HM080II User Manual
Samsung SH S223C User Manual
Samsung Gravity T SGH t669 User Manual
Radio Shack 23 1470RC User Manual
Philips HD7822 User Manual
Optimus ACR 326 User Manual