Sagem MY 302X User Manual

251108518.qxd 19/12/01 9:36 Page 1  
MY 302X  
MY 304X  
1
IN A FEW WORDS ...  
Lock and unlock the keyboard  
from the standby screen  
Switch on  
Press then OK.  
*
Press  
.
Redial last number  
Call  
Press  
twice.  
Dial the number then press  
.
Make a call from a number stored  
in the directory  
Answer  
By name: enter the first letter of the name,  
Press  
.
press  
, scroll down the list to find your  
to call.  
correspondent, then press  
Hang up  
By location in the directory: enter the location  
Press  
.
number then press to call.  
*
Switch off  
Press  
(long press).  
Hands-free  
To communicate, press  
.
Briefly, the functions  
MY_304X_EN-00.p65  
1
28/12/01, 11:16  
2
MENUS  
Enter using  
Validate using OK  
or  
Quit or return to the previous  
menu using C  
Navigate using  
and  
Services  
Directory  
Games  
Accessories  
Text messages  
Security  
Call services  
Ringing and beeps  
Controls  
Briefly, the menus  
MY_304X_EN-00.p65  
2
28/12/01, 11:16  
3
You have just bought a mobile phone and we  
congratulate you on your choice.  
GLOSSARY  
Outgoing call A call made from your phone.  
Your phone will allow you to use different international  
networks depending on the roaming agreements  
between the operators.  
Incoming call A call received by your phone.  
SIM card  
The card containing your subscription  
and access rights to services. The  
detachable part is the “micro-SIM”.  
We would like to remind you that this phone is  
approved to European standards.  
PIN  
The personal code linked to your SIM  
card.  
To get the most out of using your phone, we  
recommend that you read this manual carefully and  
keep it handy for future reference if needed.  
PIN2  
The second personal code linked to  
your SIM card to access certain  
functions (*).  
WARNING  
Phone code  
The phone code is a secret code  
intended to protect the phone in case  
of theft.  
According to the configuration of the networks and  
associated subscriptions, certain functions may not be  
available (indicated by *).  
Compatibility of  
your SIM card  
IMEI  
SMS  
The identification number of your  
phone.  
If an incompatible SIM card is  
inserted, a message will be  
displayed when switching on your  
phone. For further information,  
contact your Operator.  
Short Message Service: sending and  
receipt of text messages, icons,  
animated screen savers and  
melodies.  
Your phone is  
compatible with SIM  
3V cards only.  
The SAGEM logo and trademark are the property of SAGEM SA.  
AT is a registered trademark of Hayes Microcomputer products Inc.  
Hayes is a registered trademark of Hayes Microcomputer Products Inc.  
T9™ Text Input is a registered trademark of ©Tegic Communications Inc.  
T9 is licensed under one or more of the following U.S. Patents: 5,818,437,  
5,953,541, 5,187,480, 5,945,928, 6,011,554 and additional patents are  
pending worldwide.  
Service  
provider or  
Operator  
Company which manages the network  
subscription.  
MY_304X_EN-00.p65  
3
28/12/01, 11:16  
4
1. Presentation of the phone ..................................... 6  
1.1 Exchanging the coloured front panel ................... 9  
6. SMS ..................................................................... 25  
6.1 Receiving an SMS message ............................. 25  
6.2 Editing a message using Easy Message T9™ .. 28  
6.3 Edited messages .............................................. 30  
2. Getting started..................................................... 10  
2.1 Information on the SIM card.............................. 10  
2.2 Installing the SIM card and the battery .............. 11  
2.3 Charging the battery ......................................... 12  
2.4 Switching on/switching off, starting up .............. 13  
2.5 Menu access .................................................... 14  
2.6 Deleting characters ........................................... 14  
7. How to use the call related features .................... 31  
7.1 Forwarding calls ............................................... 31  
7.2 Viewing the list of the last numbers used.......... 32  
7.3 Monitoring the duration and cost of calls ........... 32  
7.4 Displaying the numbers .................................... 33  
7.5 Authorising double call ...................................... 34  
7.6 Configuring automatic redial ............................. 34  
7.7 Voice mail number ............................................ 34  
7.8 Local information distribution ............................ 34  
7.9 Replacing the international prefix ...................... 34  
7.10 Placing calls on hold........................................ 34  
7.11 Multi-conferencing (*) ...................................... 35  
3. Initial communication - Hands-free mode ............ 15  
3.1 Making a call ..................................................... 15  
3.2 Receiving a call ................................................ 16  
3.3 Volume control .................................................. 16  
3.4 Hands-free mode .............................................. 16  
3.5 Ending a call ..................................................... 16  
4. Menu list .............................................................. 17  
8. How to adjust the ringing tones  
and the vibrator ................................................... 36  
8.1 Selecting the volume and the type  
5. How to use the directory ...................................... 20  
5.1 Directory display ............................................... 20  
5.2 Storing a number .............................................. 20  
5.3 Deleting a number ............................................ 21  
5.4 Call groups ....................................................... 21  
5.5 Sorting .............................................................. 23  
5.6 Sending a short message to a stored number .. 23  
5.7 Directory space memory ................................... 23  
5.8 Displaying personal numbers ........................... 23  
5.9 Making a call with a stored number ................... 23  
of ringing tone ................................................... 36  
8.2 Call groups ....................................................... 37  
8.3 Personalising the ringing tone ........................... 37  
8.4 Setting the vibrator ............................................ 37  
8.5 Selecting silent mode ........................................ 38  
8.6 Setting the beeps .............................................. 38  
8.7 Deleting DTMF tones ........................................ 38  
Contents  
MY_304X_EN-00.p65  
4
28/12/01, 11:16  
5
9. How to adjust and customize your phone............ 39  
9.1 Customizing your phone ................................... 39  
9.2 Selecting the display language ......................... 41  
9.3 Select the type of response .............................. 41  
9.4 Selecting the network ....................................... 42  
9.5 Setting the time and date .................................. 43  
9.6 Controlling screen contrast ............................... 43  
9.7 Converting currencies ....................................... 43  
15.Upkeep ................................................................ 55  
16.Recommendations .............................................. 56  
Answers to your questions ........................................ 59  
10.How to use the security features  
of your phone....................................................... 44  
10.1 Locking the keyboard...................................... 44  
10.2 Changing the PIN number ............................... 44  
10.3 Changing the PIN2 number (*) ........................ 45  
10.4 Changing the phone code ............................... 45  
10.5 Changing the operator password (*) ................ 46  
10.6 Limiting incoming calls (*) ................................ 46  
10.7 Limiting outgoing calls (*) ................................ 46  
10.8 Setting up the pre-set directory (*) ................... 47  
10.9 Charge checking (*) ........................................ 47  
11. Other functions .................................................... 48  
11.1 Calculator ........................................................ 48  
11.2 Setting the alarm ............................................. 49  
11.3 Setting the timer .............................................. 49  
11.4 Configure your phone with a car kit ................. 49  
11.5 Data parameters ............................................. 49  
12. WAP Function ..................................................... 50  
13.Games ................................................................. 53  
14.Available accessories .......................................... 54  
Contents  
MY_304X_EN-00.p65  
5
28/12/01, 11:17  
6
Antenna  
Indicator light  
Ear phone/speaker  
High definition graphics screen  
Programmable key 2  
(depending on model)  
Programmable key 1  
Correction  
@
Mobile Internet access key  
Operate/Call  
Activation of hands-free  
Stop/End call  
Validate  
Scrolling arrow  
Scrolling arrow  
Microphone  
WARNING!  
Battery charging and accessories socket  
During a call, mind you do not obstruct the  
microphone with your hand.  
1. Presentation of the phone  
MY_304X_EN-01.p65  
6
28/12/01, 11:19  
7
Function keys  
Alphanumeric keyboard  
Made up of 12 keys: 0 to 9, and #.  
*
Stop – Reject a call – Hang up  
To obtain a number or letter, hold down the  
relevant key until the desired number or  
letter appears.  
Go – Call a number – Receive a call –  
Hands-free mode  
Letters with accents are obtained by a long  
press on after entering the letter with no  
*
C
Short press: Return to the previous  
menu – Delete a character  
Long press: Exit menu mode –  
Complete deletion of the entry  
accent.  
Punctuation marks and special symbols are  
obtained by a long press on the # key.  
OK Validate  
Key 1  
- Programmable keys for direct  
access to the functions that you  
have selected (depending on model)  
A long press on key 1 allows you to access  
the voicemail service (depending on model).  
- Volume control during conversation  
(
key: lower,  
- Contextual action  
Mobile Internet access key  
and Entry and scrolling through the  
menus.  
key: louder)  
@
1. Presentation of the phone  
MY_304X_EN-01.p65  
7
28/12/01, 11:20  
8
Receipt of SMS and  
presence of SMS not read;  
Flashing: SMS memory full.  
Display  
The high definition graphics screen enables  
you to read messages easily. Various icons  
inform you about the status of functions.  
Voice messages present.  
Battery charge indicator  
(black if charged, clear if  
discharged)  
The three keys located under the screen are  
allocated to actions described at the bottom  
of the screen just above the key, each time it  
is necessary.  
Received signal strength  
indicator (maximum  
strength: 5 bars) ; the R  
letter indicates if the  
network found does not  
correspond to the  
For example:  
Validate Pressing  
validates the current  
function.  
subscription  
If flashes, the phone is  
searching for a network  
Hands-free loudspeaker  
Call in progress  
Permanent call forwarding  
Silent mode  
1. Presentation of the phone  
MY_304X_EN-01.p65  
8
28/12/01, 11:20  
9
Release the front panel by moving the retention lugs  
() if necessary and pushing them with a pen for  
example.  
1.1 Exchanging the coloured front  
panel  
Switch off the phone.  
Remove the rear cover and the battery  
(see on page 11).  
Hold the phone with the front panel facing  
downward, and with the antenna pressed  
against you.  
Free the front panel by moving the  
retention lugs ().  
Install the keyboard in the new front panel.  
Position the phone and the new front panel as  
shown.  
Replace the battery and the cover.  
1. Presentation of the phone  
MY_304X_EN-01.p65  
9
28/12/01, 11:20  
10  
2.1 Information on the SIM card  
To use your phone, you have a  
small card called a SIM card. In  
addition to all of the information  
necessary for the network, this card  
contains other information that you  
can modify:  
SIM card  
This card must be  
handled and stored  
with care in order to  
avoid excessive  
stresses or  
scratches that would  
damage it. If your  
SIM card is lost,  
contact your  
Operator or Service  
Provider  
• secret codes (PIN and PIN2 -  
Personal Identification Number)  
• directory  
• mini-messages  
2. Getting started  
immediately.  
• functioning of specific services.  
Note: Do not leave  
you SIM card within  
the reach of small  
children.  
2. Getting started  
MY_304X_EN-02.p65  
10  
28/12/01, 11:21  
11  
PIN code  
2.2 Installing the SIM card  
and the battery  
This is the personal code for your SIM card. You  
may be asked to enter this code when the instruction:  
Pin number ? appears after you switch on your  
phone.  
Switch off your phone and  
disconnect the charger.  
Enter the code of between 4 and 8 digits given  
to you by your operator. These digits will not be  
displayed on the screen for security reasons.  
The SIM card is inserted beneath  
the phone’s battery.  
Turn your phone over and  
remove the rear cover. Press on  
top and make it slide.  
Press # or OK or  
to validate.  
PIN2 code (*)  
If one was given to you by your Operator, a second  
PIN code provides secure access to certain functions.  
Slide the card along the base  
beneath the retaining plate, with  
the gold coloured sections facing  
towards the phone and the cut-  
off corner lined up to match the  
drawing on the phone.  
Warning  
If the wrong PIN code is entered three times in a row, the card  
will be locked. To unlock your card:  
-
-
enter **05*  
enter the PUK code (Personal Unlocking Key) provided by  
your Network Operator and validate,  
enter your PIN code and validate,  
enter your PIN code again and validate.  
Place the battery by first  
inserting the upper section into  
the opening.  
-
-
After 5 or 10 times (depending on SIM card type), the SIM card  
will be permanently locked. Contact your Operator or your  
Service Provider to obtain a new card.  
The same procedure (entering 052) applies when the PIN-2  
code is blocked (PUK 2 code).  
Replace the cover sliding it until  
it locks.  
2. Getting started  
MY_304X_EN-02.p65  
11  
28/12/01, 11:22  
12  
WARNING  
2.3 Charging the battery  
Your phone is powered by a rechargeable  
battery. A new battery must be charged for at  
least 4 hours before it is used for the first  
time. It will reach its nominal capacity after  
several usage cycles.  
There is a risk of explosion if the battery is  
incorrectly replaced or disposed of in fire.  
Do not short-circuit.  
When your battery has run down, the phone  
displays it and cuts out.  
The battery does not contain any  
components that can be changed by you.  
To recharge your battery:  
Do not attempt to open the battery case.  
Connect the charger to a wall outlet.  
Only use the correct chargers and  
batteries as shown in the manufacturer’s  
catalogue.  
Connect the end of the charging cable to  
the bottom of your phone.  
Spent batteries must be collected at the  
appropriate sites.  
You are advised to remove the battery if  
you intend to leave your telephone unused  
for a long period.  
The phone will start charging. The battery  
charging indicator indicates the charge.  
Charging stops by itself.  
Unplug the cable.  
It is possible that during charging, the battery  
may heat up slightly; this is normal.  
2. Getting started  
MY_304X_EN-02.p65  
12  
28/12/01, 11:22  
13  
Network  
indicator  
2.4 Switching on/switching off,  
starting up  
Searching for a network  
The phone then searches for a  
network on which it can  
communicate:  
The indicator of the  
level of network  
signal received  
To switch on your phone:  
Control of the PIN  
code  
If it finds one, the name of the  
network appears on the screen,  
and the indicator light flashes  
green.  
enables you to  
Press  
to switch on your  
visualise the quality  
of reception. If it  
shows less than  
three bars, look for  
better reception to  
make your call in  
good conditions.  
If your phone  
displays SIM absent,  
phone.  
If access to the SIM card is  
protected by a secret code, the  
phone will ask you to enter your  
PIN code.  
press  
(long  
You are ready to make or receive a  
call.  
press) to switch off  
your phone and  
check that your SIM  
card is correctly  
positioned.  
If the R letter and a network  
name are displayed, calls can be  
made and the indicator light  
flashes green.  
Enter the code of between 4 and  
8 digits given to you when you  
were given your SIM card. These  
digits will not be displayed on the  
screen for security reasons.  
If the R letter is displayed without  
any network name, only  
emergency services will be  
accessible (police, ambulance,  
fire brigade).  
Press # or OK or  
to validate.  
If the flashes, the phone will  
keep searching. No network is  
available.  
2. Getting started  
MY_304X_EN-02.p65  
13  
28/12/01, 11:22  
14  
Switching off  
2.6 Deleting characters  
You can cancel an entry error:  
Hold down the  
key until the  
Press quickly on C to delete the last  
character.  
end message is displayed.  
Release the key. The phone  
switches off.  
If you press this key longer, you will delete  
the previous word.  
2.5 Menu access  
The menu functions permit you to  
verify or modify the various  
functions of your phone to adapt it  
to your needs.  
Press the scrolling arrows  
to access the menus.  
or  
Direct access to  
menus  
Scroll through the menus using  
the scrolling arrows then press  
OK to access the selected menu.  
To directly access a  
menu, press  
Each time you want to validate  
an action, press OK.  
then enter the  
number of the  
selected menu.  
To abandon an action, press C.  
To exit the menu mode, press  
and hold C.  
2. Getting started  
MY_304X_EN-02.p65  
14  
28/12/01, 11:22  
15  
International call  
3.1 Making a call  
Press 0 (long press)  
to display + then dial  
the country code  
without waiting for a  
tone, then the  
The network is displayed.  
Dial the number, including the  
area code if necessary, by  
pressing keys on the  
number you require.  
alphanumeric keypad.  
Press  
.
During the call, flashes on the screen,  
and tones may signal the establishment of  
a connection.  
3. Initial communication  
Hands-free mode  
When the person you have called  
answers, speak.  
Emergency  
services  
Depending on the operator, you can contact the  
emergency services with or without a SIM card or  
when the keyboard is locked. It is sufficient to be in a  
zone served by a network. To call the international  
emergency service, dial 112 then press  
.
Other emergency service numbers may exist,  
depending on the country.  
3. Initial communication  
MY_304X_EN-03.p65  
15  
28/12/01, 11:23  
16  
The “Hands-free”  
mode enables you to  
follow a  
conversation with  
several people and  
be free to move, for  
example, to take  
notes during your  
conversation.  
3.2 Receiving a call  
3.4Hands-free mode  
When you receive a call:  
During a call, you can transfer from  
handset mode to hands-free mode  
simply by pressing one key and the  
reverse.  
Press  
then speak.  
The caller’s number is displayed when it is  
presented to the network.  
Press  
.
All incoming and outgoing call numbers  
are registered in the list of the last calls.  
The screen displays for  
handset mode and  
for  
« hands-free » mode.  
3.3 Volume control  
Increase or decrease the volume during a  
conversation by pressing the or  
keys.  
Before putting the phone to your ear, check the volume control  
settings as well as the selected listening method, especially if  
using integrated hands free mode, which could cause ear  
damage if used incorrectly.  
3.5 Ending a call  
Press  
.
The end of call message appears  
on the screen.  
3. Initial communication  
MY_304X_EN-03.p65  
16  
28/12/01, 11:23  
17  
You have the option of personalising the presentation  
of the menus, and so of limiting access to certain  
functions (See chapter How to adjust and customize  
your phone).  
The following list presents the expert level (limiting  
itself to the 3rd sub-menu).  
Services  
Access to specific services offered by the operator  
Directory  
Directory menu  
Sort by location  
Create record  
Call groups  
20  
4. Menu list  
Available memory  
Personal numbers  
Quit  
According to the model of your phone, to the  
configuration of the networks and associated  
subscriptions, certain functions may not be available  
(indicated by *).  
Scroll through the names entered 23  
See record  
Modify  
Delete  
Call  
Send message  
Quit  
4. Menus  
MY_304X_EN-04.p65  
17  
04/01/02, 08:37  
18  
Double call  
34  
Text messages  
Activation  
De-activation  
Status  
Access to the SMS  
25  
31  
Call services  
Call forwarding  
All voice calls  
Automatic redial  
Voice mail number  
Local information (*)  
Replace “+” prefix (*)  
34  
34  
34  
34  
All conditional fwd  
Cancel voice forwards  
Forward if busy  
Forward if no answer  
Forward if unavailable  
Data forwarding  
Faxes forwarding  
View last numbers  
Options  
Ringing and beeps  
Volume and choice of music  
Call groups  
Personalised ringing tone  
Create a tune  
Vibrate  
36  
37  
37  
32  
32  
37  
Vibrate and ring  
Vibrate then ring  
Inactive vibrate  
Only vibrate  
Call  
Duration and cost of calls (*)  
Counters  
Delete durations  
Costs (*)  
Silent mode  
Beeps  
Keypad beeps  
Network beep  
Low battery beep  
Tones  
38  
38  
Delete costs (*)  
Display of duration  
Display numbers  
Anonymous mode  
Your number  
33  
38  
Callers’ number  
4. Menus  
MY_304X_EN-04.p65  
18  
04/01/02, 08:37  
19  
Operator password (*)  
Limit incoming calls (*)  
Incoming voice calls  
Incoming data calls  
Incoming fax calls  
All incoming calls  
Limit outgoing calls (*)  
Outgoing voice calls  
Outgoing data calls  
Outgoing fax calls  
All outgoing calls  
Pre-set directory (*)  
Costs (*)  
46  
46  
Controls  
Customization  
Menus type  
39  
Energy saving  
Screen Saver  
Greeting message (*)  
46  
Prog. Key (*)  
Select language  
Automatic response  
Auto. answer  
41  
41  
Any key  
47  
47  
Network selection  
Networks available  
Preferred networks  
Setting time/date  
Display contrast  
Currency converter  
Rapid exchange  
Exchange rate  
42  
Settings  
Limitation  
43  
43  
43  
Accessories  
Calculator  
Alarm  
Timer  
Car kit (*)  
Data parameters  
48  
49  
49  
49  
49  
Currencies  
Security  
Keyboard locking  
PIN number  
Modify  
44  
44  
Games  
Control PIN  
PIN2 number (*)  
Phone code  
Modify  
45  
45  
Control phone code  
4. Menus  
MY_304X_EN-04.p65  
19  
04/01/02, 08:37  
20  
The number of  
5.1 Directory display  
telephone numbers  
stored in the SIM  
card directory varies  
depending on the  
capacity of the card.  
Your Operator or  
your Service  
Provider can provide  
you with this  
information.  
You can store the telephone  
numbers that you call regularly:  
in the SIM card,  
in the phone itself.  
Different icons will inform you of the  
directory location where the number  
is stored when you search for it:  
SIM card directory  
Your phone’s directory  
SIM card pre-set directory.  
5. How to use the directory  
5.2 Storing a number  
It is advisable to  
store numbers in  
their international  
format (+, country  
code, and number).  
You can verify the  
contents of a record  
and modify it by  
selecting the  
In the Directory menu, select  
Create record. Validate by  
pressing OK.  
Enter the name (the number of  
accepted characters depends on  
the SIM card used). Validate.  
required name.  
Enter the number including the  
area code, if necessary (up to  
20 characters). Validate.  
5. Directory  
MY_304X_EN-05.p65  
20  
28/12/01, 11:24  
21  
You can enter spaces in the number  
(displayed as commas “,”) by  
Creating a group  
When sorting by  
location, pressing on  
By default, groups have already been  
created in the phone.  
pressing (long press) on or #. The  
the key launches  
*
*
figures entered after a space are  
a search for the first  
available location;  
pressing on #  
returns to the start  
of the list.  
processed in a DTMF sequence  
(usable after a number).  
In order to look up their characteristics,  
display a list of the groups - Directory/  
Directory menu/Call groups menu.  
If necessary, select the call group  
to which you want to assign this  
number.  
Using the scrolling arrows, choose a group  
and press OK. You are then able to look up  
or alter its characteristics or to erase the  
group.  
Depending on the available space, you can  
select the storage location of the number  
entered: SIM card or phone itself.  
To create a new group:  
Go into Directory/Directory menu/Call  
groups.  
5.3 Deleting a number  
Choose Create group.  
To delete the contents of a directory location,  
select the name using the scrolling arrows.  
Validate by pressing OK. Select Delete, then  
validate.  
Enter a name and validate.  
Choose an icon using the scrolling arrows  
and validate.  
Choose a ring tone, then choose a  
vibrator mode, and validate.  
5.4 Call groups  
The selection of a call group is made when  
entering a number into the directory, or when  
modifying a number you have already saved.  
You are also able to classify contacts  
recorded in the directory into Call Groups.  
To each of these groups you attribute certain  
characteristics (icon, ringing tone, vibrator,  
etc.).  
5. Directory  
MY_304X_EN-05.p65  
21  
28/12/01, 11:25  
22  
Activate the Call Groups  
function  
Looking up a group  
If call groups are not  
enabled, you cannot  
attach correspondents  
to groups.  
Select the group to be looked up and  
press OK.  
If you want the characteristics of the  
groups to apply to each call:  
Choose See group. The screen presents  
the name, the icon, and the choice of  
vibrator mode of the group.  
Go into Directory/Directory  
menu/Call groups.  
If there are contacts attached to this  
group, press the  
Choose Activate groups.  
key can be used to  
view the list of these ones.  
Tick the box and validate.  
The calls received from contacts who do not  
belong to a Call group use the parameters  
provided in the Ringing and beeps menu.  
Modifying a group  
Select the group to be modified, and press  
OK.  
Available memory  
Choose Modify.  
Carry out the wanted modifications.  
Validate by OK.  
To ascertain the number of groups which can  
still be created:  
Go into Directory/Directory menu/Call  
groups.  
Deleting a group  
Select the group to be deleted, and press  
OK.  
Choose Available memory.  
Choose Delete.  
The first number shows the number of  
groups which can still be created, and the  
second shows the maximum number of  
groups.  
Confirm by OK.  
5. Directory  
MY_304X_EN-05.p65  
22  
28/12/01, 11:25  
23  
5.5 Sorting  
5.8 Displaying personal numbers  
Using Directory menu/Personal numbers  
menu, you can create records for your  
own numbers in order to be able to  
consult them.  
Directory menu enables you to sort the  
stored numbers by name or location; for the  
latter, the free locations are indicated in the  
list.  
5.9 Making a call with a stored  
number  
5.6 Sending a short message to a  
stored number  
Select the recipient scrolling using the  
scrolling arrows and validate using OK.  
Select Send message and validate using  
OK.  
Here are all the ways you can call a  
correspondent, whose number you have  
saved in the directory, from the standby  
screen:  
Compose your text message.  
1) Enter the first letter(s) of your  
correspondent’s name, as you saved it  
Press OK. Select Send and validate using  
OK. The recipient number is displayed.  
into the directory, and then press  
.
Send your message using  
key.  
The directory list is displayed, with the first  
name that corresponds with the letter you  
entered at the top. If your correspondent  
is not at the top, use the scrolling arrows  
to select the name.  
5.7 Directory space memory  
In Directory menu, select Available  
memory. Validate using OK.  
Press on  
to make the call.  
The screen will display the amount of  
available space on the SIM card and on  
the phone itself.  
5. Directory  
MY_304X_EN-05.p65  
23  
28/12/01, 11:25  
24  
2) Enter the number under which you have  
saved your correspondent’s details, and  
then press on (rapid dial).  
*
3) Enter the number under which you have  
saved your correspondent’s details, and  
then press on #. Your correspondent’s  
number is displayed, at which point you  
can modify or add to the number.  
Press on  
to make the call.  
5. Directory  
MY_304X_EN-05.p65  
24  
28/12/01, 11:25  
25  
6.1 Receiving an SMS message  
Several types of SMS messages  
Access to this  
can be received:  
service depends on  
the network. For  
more information,  
consult your  
Operator or your  
Service Provider.  
text messages  
icons for call groups  
animated screen savers  
melodies  
WAP bookmarks.  
6. SMS  
When you receive an SMS message, a beep  
is heard, (the beep selected in the menu  
Ringing and beeps/Volume and choice of  
music/Messages) a flashing red light  
appears and the  
icon is displayed on  
your phone screen.  
This icon remains on screen as long as the  
SMS messages have not been read.  
When the memory flashes, it is full.  
6. SMS  
MY_304X_EN-06.p65  
25  
28/12/01, 11:26  
26  
The receipt of icons, animated  
screen savers or melodies can take  
several minutes. Messages inform  
you of the downloading progress.  
This symbol indicates that an SMS  
message has been altered: it  
consists of several fragments, some  
of which have been deleted.  
Ask your Operator  
about the down-  
loading of SMS  
icons, animated  
screen savers or  
melodies.  
You can hide that screen at any  
time by pressing (e.g. to make a  
call or access other information on  
your phone) or delete the download  
Meaning of the symbols in front of each  
SMS message  
Call group icons  
Animated screen savers  
Text messages  
Melodies.  
Unread SMS  
messages are in  
bold.  
in progress by pressing  
.
Go into the Text messages menu to  
access the list of messages  
received.  
Actions possible on an SMS message  
received  
Meaning of the symbols at the top of the  
screen  
Select an SMS message.  
This symbol indicates a written text  
message. If this symbol is flashing,  
it means that the SMS message has  
not been sent.  
By pressing  
, you can:  
• read an SMS text message  
• view and save an SMS icon or  
animated screen saver  
This symbol indicates an SMS  
message received. If this symbol is  
flashing, it means that the SMS  
message has not been read yet.  
• listen to and save an SMS melody.  
When you press (Options), various  
options are available according to the type  
of SMS message received:  
This symbol indicates an SMS  
message which is incomplete or in  
the process of being downloaded.  
• read it  
• delete it  
6. SMS  
MY_304X_EN-06.p65  
26  
28/12/01, 11:26  
27  
reply  
Saving a melody in your phone  
Warning  
Warning  
forward it to another person  
consult the available memory  
A melody is saved in the Ringing  
and beeps/Personalised ringing  
tone menu.  
Only the screen  
savers and melodies  
without Copyright  
may be forwarded to  
another person and  
depending on model.  
You must listen to  
the entire melody in  
order to be able to  
save it.  
delete all SMS messages  
already read  
delete all SMS messages  
choose a sending option  
enter the number of the  
messaging centre  
add a WAP bookmark (see  
below)  
If you have just listened to it,  
press  
(Record)  
or  
Select it in the list and choose the Save  
option by pressing (Options).  
The space required as well as the space  
available in the phone are indicated.  
save it in your phone (SMS  
melody, animated screen  
saver and icon (see below)).  
If the maximum number of melodies or the  
maximum capacity has been reached, you  
will be asked if you wish to delete some  
melodies or replace an existing melody with  
the new one.  
Adding a WAP bookmark in your  
phone  
To add a WAP bookmark received:  
ü
This sign placed in front of a melody  
indicates that it can be deleted and  
will free enough memory space to  
save the new one.  
If you have just read it, choose  
the Add WAP bookmark option  
by pressing (Options)  
or  
This sign placed in front of a melody  
indicates that it can be deleted but  
will not free enough memory space  
to save the new one.  
Select it in the list and choose  
the Add WAP bookmark option  
by pressing (Options).  
6. SMS  
MY_304X_EN-06.p65  
27  
28/12/01, 11:26  
28  
Saving an animated screen saver on your  
phone  
Select it in the list and choose the Save  
option by pressing (Options).  
An animated screen saver is saved  
in the Controls/Customization/  
Screen Saver menu.  
The space required as well as the space  
available in the phone are indicated.  
Warning  
You must view the  
entire screen saver  
in order to be able to  
save it.  
If the maximum number of icons or the  
maximum capacity has been reached, you  
will be asked if you wish to delete some  
icons or replace an existing one with the new  
one.  
If you have just viewed it, press  
(Record)  
or  
Select it in the list and choose the Save  
option by pressing (Options).  
6.2 Editing a message using  
Easy Message T9™  
The space required as well as the space  
available in the phone are indicated.  
T9™ mode is  
If the maximum number of animated screen  
savers or the maximum capacity has been  
reached, you will be asked if you wish to  
delete some animated screen savers or  
replace an existing one with the new one.  
activated as soon as  
you create or modify  
a message.  
The Easy Message T9™ function  
helps you to easily enter short  
messages.  
Select the Text messages/Write  
new... menu and press OK.  
Language  
Saving an icon in your phone  
By default, the  
Selecting the editing language  
language used is that  
which is activated on  
the phone’s menu  
display (or English if  
a language not  
supported by Easy  
Message T9™ is  
selected in the  
An icon is saved in the menu Ringing and  
beeps/Call groups/Call groups menu.  
Validate T9 by pressing the  
key. Select using the scrolling  
arrows, the language required  
and validate by pressing OK.  
If you have just viewed the icon, press  
(Record)  
or  
menu).  
6. SMS  
MY_304X_EN-06.p65  
28  
28/12/01, 11:26  
29  
Using T9 mode  
Additional entry modes  
Press the key corresponding to the letter  
required, compose the word by continuing  
to press the keys corresponding to the  
different letters, without worrying about the  
display, until the whole word is entered: it  
will appear in negative, white on black.  
The key  
selects one mode or another.  
The 123 mode inserts numbers.  
The Insert symbol mode displays a list of  
symbols and the figures from 0 to 9 that  
correspond to them.  
To enter a symbol, simply type the number  
that appears above the character  
required, for example: 6 for ?. The symbol  
is inserted into the text and you return  
automatically to Easy Message T9™  
mode. Several lists are accessible using  
the scrolling arrows.  
If the word proposed corresponds to the  
one you are looking for, press 0 to validate  
it, create a space and go on to the next  
word.  
It is possible that there are  
several words in the dictionary  
As you go along,  
that contain the same sequence  
of keys pressed. If the word that  
appears is not the one you want,  
press @ to scroll through the  
words present in the dictionary,  
corresponding to this sequence of  
keys. When you find the word you  
want, press 0 to validate, type a  
space and go on to the next word.  
depending on the  
keys pressed, the  
software looks in a  
dictionary for the  
corresponding words  
that are most  
The ABC mode enters words that do not  
exist in the dictionary or in another  
language. To obtain a letter, hold down the  
corresponding key. The letters and  
numbers scroll. Release the key when the  
required letter appears.  
frequently used.  
Capital letters  
You can type capital letters, by pressing  
If the word that you want does not appear  
in the dictionary, several additional modes  
allow you to vary the nature of the words  
entered.  
the key before entering the relevant  
character. The following characters will  
automatically return to lowercase.  
*
6. SMS  
MY_304X_EN-06.p65  
29  
28/12/01, 11:26  
30  
Words in capital letters  
After validating your text, you can choose  
one of the following options:  
You can also choose to type a whole word  
in capital letters by pressing twice on the  
Send your message  
Store your message  
De-activate Zoom  
Cancel.  
key before entering the word. It is  
possible to return to lower case mode by  
*
pressing once on the key.  
*
Punctuation marks  
Punctuation marks are obtained by using  
either the 1 key (except in numeric mode),  
or using the Insert symbols mode (quick  
access using # key).  
6.3 Edited messages  
Pressing the key (Options), different  
options are available for an edited message:  
Accented characters  
read it  
The number of  
messages stored in  
the SIM card  
changes depending  
on the SIM card  
capacity; contact  
Accented characters are  
send it  
automatically generated in the  
word in Easy Message T9™  
mode. In ABC mode, you need to  
wait for the accented character to  
be displayed whilst holding down your Operator or  
the corresponding key.  
delete it  
modify it  
view the memory occupation level  
delete them all  
your Service  
Provider. for further  
information.  
select a send option (acknowledgement,  
reply given, period of validity, message  
format)  
enter the message centre number.  
6. SMS  
MY_304X_EN-06.p65  
30  
28/12/01, 11:26  
31  
Look out for  
7.1 Forwarding calls  
Forwarding voice calls  
incompatibilities; for  
more information,  
consult your  
Depending on your subscription, this  
service allows you to transfer  
incoming calls to another number or  
a mailbox.  
Operator or your  
Service Provider.  
Scroll through the menu to activate the  
type of forwarding that you require:  
•Forward all voice calls: all incoming  
calls are forwarded to a number you  
define  
7. How to use the call  
related features  
•Forward all conditional calls  
•Forward calls when your line is busy  
•Forward calls when there is no answer  
on your extension after a period that  
you can define by answering the  
questions on the menu  
•Forward calls when your phone is  
unavailable, outside of network  
coverage or switched off.  
Enter the number to which you want to  
forward your calls. If necessary, include  
the area code you would use if you were  
calling the number from your phone.  
7. Call related features  
MY_304X_EN-07.p65  
31  
28/12/01, 11:27  
32  
Validate by pressing  
.
The forwarding  
number to the  
messaging centre  
depends on the  
subscription type.  
7.2 Viewing the list of the last  
numbers used  
A message on the screen  
confirms that forwarding has  
been activated.  
You can consult the list of the last  
numbers used (outgoing and  
incoming if available).  
Several options are  
available for this  
number: store it in  
your directory, send  
it a short message,  
delete it. You can  
also delete the  
You can also cancel all types of  
forwarding.  
Warning  
You can view the status of a type  
of call forwarding in order to  
verify whether it is active or not.  
This function is also useful for  
controlling the number to which  
your calls are forwarded. The  
information supplied is provided  
by the network.  
To redial a number:  
Cancellations of  
forwarding can  
cause particular  
reactions in certain  
networks.  
Select from the list using the  
scrolling arrows.  
whole list of  
numbers.  
Make the call by pressing on  
Shortcut  
.
From the standby screen, press on  
.
Forwarding data or faxes  
For services specific  
to a network, such  
as mailboxes, short  
dialling is only valid  
when covered by the  
particular network.  
You may possibly  
prefer an  
international number.  
This memory is  
linked to the phone  
and not to the SIM  
card.  
Depending on your subscription,  
this service permits you to transfer  
data or faxes that are addressed to  
you to another number.  
7.3 Monitoring the duration and  
cost of calls (*)  
On the Counters menu you can view the  
duration of the last call and all calls made  
since the last deletion.  
You can activate the data or faxes  
forwarding service, to enter the  
required number, cancel it and view  
the status of the service.  
The Delete durations menu enables you  
to delete the duration of the last call and  
reset to zero the total calls counter.  
7. Call related features  
MY_304X_EN-07.p65  
32  
28/12/01, 11:27  
33  
On the Costs (*) menu you can  
view the cost of the last call and  
all calls made since the last  
deletion.  
Yes: you wish to use the anonymous  
mode and the person you are calling  
cannot know your number.  
This data is purely  
indicative and does  
not represent proof.  
The metering criteria  
for the network can  
be appreciably  
Your number  
The Delete costs (*) menu  
enables you to clear the cost of  
the last call and to reset the call  
counter after entering your PIN2  
code.  
•On outgoing calls you can check that your  
phone number is displayed on the phone  
of the person you are calling (CLIR).  
different (indivisible  
minutes, etc.).  
•On incoming calls, you can check that the  
telephone number of a phone to which you  
are transferring calls will appear on the  
The Display of duration menu enables  
you to select the duration display during a  
call.  
phone of a person calling you (COLR).  
Callers Number  
7.4 Displaying the numbers  
•On outgoing calls, you can see the phone  
number to which your call is being  
transferred (COLP) if the person you are  
calling has authorised his or her identity to  
be displayed by deactivating the COLR  
option.  
This menu permits you to see the status of  
the display numbers function for:  
•your identity (phone number)  
•the identity of the person calling you.  
•On incoming calls, when it is activated,  
this function displays on your phone the  
phone number of the person calling  
(CLIP). This function is only possible if the  
caller has authorised his identity to be  
displayed by deactivating his CLIR option.  
Anonymous mode  
You can decide whether the person you are  
calling is given your phone number or not.  
Preset: the phone network default mode.  
No: you do not wish to use the  
anonymous mode and the person you are  
calling will know your number.  
7. Call related features  
MY_304X_EN-07.p65  
33  
28/12/01, 11:27  
34  
Call waiting  
7.5 Authorising double call  
7.8 Local information distribution  
You can activate,  
deactivate and view  
the status of the call  
waiting service in  
order to check  
(Service depending on the operator)  
This menu allows you to activate  
and select reception of information  
distributed by the network.  
Contact your  
operator for further  
details)  
During a call, a special tone can  
inform you that another caller is  
trying to reach you. The caller’s  
number - and name, if stored - is  
displayed on the screen.  
whether it is active  
or not.  
7.9 Replacing the international  
prefix  
During a call, when pressing the @ key, the  
key changes function and gives access to  
different possibilities of actions with this call.  
(Depending on model)  
In the event that a call is not possible with  
the “+” prefix, you have the option of  
choosing a replacement prefix with no need  
to change the number(s) already recorded  
with the prefix + in the directory.  
7.6 Configuring automatic redial  
You can activate automatic redial either by  
default or on demand.  
7.10 Placing calls on hold  
7.7 Voice mail number  
(Service depending on the operator)  
To program a special permanent call number,  
type in this number and validate.  
During a call, you can put the  
current call on hold by pressing Ok.  
Warning  
This number is used when calling the voice  
mail centre with the programmable keys.  
In this case,  
pressing  
calls.  
During a call, when pressing the @  
key, the key changes function and  
enables you to access different  
ends all  
options for the call.  
7. Call related features  
MY_304X_EN-07.p65  
34  
28/12/01, 11:27  
35  
1 X  
2
End the current call order number  
X.  
7.11 Multi-conferencing (*)  
Place on hold the current call (or  
multi-conference calls) and accept  
the call holding or waiting (or  
multi-conference calls).  
(Service depending on the operator  
and depending on model)  
Multi-conferencing  
enables you to talk  
to several callers  
(depending on the  
network capacity  
and on the model).  
A multi-conference is limited to 6  
participants: 5 in a multi-conference  
and one additional call  
2 X  
Place on hold the multi-  
conference calls except for the  
current call order number X  
(private call).  
During a call, when pressing the @  
key, the key changes function and gives  
access to different possibilities of actions  
with this call.  
3
Add a call holding (or multi-  
conference calls) to the current  
call (or to the multi-conference).  
Standard commands  
Tel N°  
Place on hold the current call (or  
the multi-conference calls) and  
call another phone number.  
Sequences of standard keys also permit  
access to services such as call notification,  
call holding, multi-conferencing, and open up  
additional possibilities:  
If you use this feature, we recommend that  
you first place the current caller on hold,  
then dial the new number as a courtesy to  
your caller and to ensure privacy with the  
0
Reject a call holding or waiting (or  
multi-conference calls).  
other party if desired.  
1
End the current call holding or  
waiting (or the multi-conference  
calls if there are any) and accept  
the call (or multi-conference  
calls).  
End all calls except for a possible  
call waiting.  
7. Call related features  
MY_304X_EN-07.p65  
35  
28/12/01, 11:27  
36  
8.1 Selecting the volume and  
the type of ringing tone  
You can set your phone to ring on  
receiving calls and/or short  
messages.  
There are numerous  
tunes available  
(including a «silent  
ringing tone») and  
several volume  
levels including a  
crescendo.  
You can, during adjustment,  
listen to the melody selected or  
not: activate or don’t by pressing  
@; the symbol appears barred  
or not.  
Select the ringing tone required  
using the scrolling arrows.  
8. How to adjust the ringing  
tones and the vibrator  
Press  
to move on to the next  
section.  
Select the volume required for using the  
phone with the scrolling arrows (from 1 to  
4 and + for the volume crescendo) and  
validate using OK.  
Press  
to move on to the next section.  
Select the volume required for using the  
hands free car or pedestrian kit with the  
scrolling arrows (from 1 to 4 and + for the  
volume crescendo) and validate using OK.  
8. Ringing tones and vibrator  
MY_304X_EN-08.p65  
36  
28/12/01, 11:28  
37  
If you have saved melodies received by  
SMS (see SMS chapter), they will appear in  
that menu.  
8.2 Call groups  
See chapter How to use the directory for all  
the functions about call groups.  
You can then modify it (if the copyright  
allows it), listen to it or select one of the  
following options:  
Downloaded icons  
If you have saved icons received by SMS  
(see SMS chapter), they will appear in the  
menu Ringing and beeps/Call groups/Call  
groups menu.  
change its title  
send it by SMS to another person (if it is  
not Copyright protected)  
consult its memory capacity  
consult the available memory  
delete the selected melody  
delete all melodies.  
If you select an icon in the list, it will appear  
at the top of the screen.  
You can then delete it or select one of the  
following options:  
• change its title  
8.4 Setting the vibrator  
• consult the available memory  
• delete the selected icon  
• delete all saved icons.  
Wherever you require your calls to arrive  
discreetly, you can use the vibrator or select  
the silent mode.  
Using the scrolling keys, select one of the  
following options: inactive vibrate, only  
vibrate, vibrate and ring, vibrate then ring.  
8.3 Personalising the ringing tone  
You have the option of creating a  
personalised call tune. A help menu,  
Validate by pressing  
.
accessible by pressing  
, will guide you.  
8. Ringing tones and vibrator  
MY_304X_EN-08.p65  
37  
28/12/01, 11:28  
38  
Setting the low battery tone  
8.5 Selecting silent mode  
If you want your phone to give a warning  
beep when your battery is low:  
If you want the ringing tone of your  
phone to be replaced by the vibrator  
and the beeps to be suppressed  
(except for the alarm tone), tick the  
box and validate by pressing OK.  
Silent mode is  
automatically  
Tick the box and validate by pressing OK.  
deactivated when  
the hands free kit  
car is connected as  
well as when the  
phone is switched  
on/off.  
8.7 Deleting DTMF tones  
This mode is indicated by the  
symbol on the screen saver.  
(Depending on model)  
You can delete the emission of DTMF tones  
during a call. You can thus make a call, in a  
comfortable and discreet way for you caller.  
8.6 Setting the beeps  
To be discreet, clear the selection from the  
box. Validate by pressing OK.  
Different controls are available:  
You can select the  
tones produced by  
your keypad: Beep,  
DTMF (musical  
keys) or non active  
tones (in this last  
case, when you  
press your  
Setting the keypad tones  
Select the tone required using  
the scrolling arrows and validate  
(press  
).  
Setting the network tone  
keyboard, it does not  
make a noise).  
If you want your phone to give a  
warning beep when it locates a  
network on which it can  
communicate:  
Tick the box and validate by  
pressing OK.  
8. Ringing tones and vibrator  
MY_304X_EN-08.p65  
38  
28/12/01, 11:28  
39  
9.1 Customizing your phone  
Menus type  
You have the option of personalising the  
presentation of the menus, and so of limiting  
access to certain functions.  
Three levels are available:  
-
-
-
Expert: presents all of the functions  
Essential: presents the main functions  
Restricted: limits access to certain  
functions.  
9. How to adjust and  
customize your phone  
Installing the energy saving mode  
In order not to use the phone’s screen light  
and thereby increase its operating time:  
In the Customization/Energy saving  
menu, check No light and press OK to  
validate.  
9. Phone adjustment  
MY_304X_EN-09.p65  
39  
28/12/01, 11:29  
40  
consult its memory capacity  
consult the available memory  
delete the selected screen  
delete all screens.  
Configuring the idle mode  
You can choose between an animated idle  
screen or the economy mode.  
In the Customization/Screen Saver  
menu, use the scrolling arrows to select  
the animation you want, a text, a banner  
or the economy mode.  
Personalising the welcome screen  
Depending on model  
Press  
to access the setting of the  
You can personalise the welcome screen of  
your phone by typing a text. Validate by  
pressing OK.  
animation or economy mode activation  
interval.  
Press OK to validate.  
Customizing the programmable keys  
To exit the economy mode, press  
.
Depending on model  
The action allocated  
If you have saved animated screen  
savers received by SMS (see SMS  
chapter), they will appear in that  
menu.  
This menu, accessible directly by a  
short press on a programmable key  
from the standby screen, enables  
to a programmable  
key is triggered by a  
long press or two  
short presses only  
from the standby  
screen.  
The frequency of  
display of the screen  
saver has a direct  
impact on the  
phone's operating  
capacity. For optimal  
operating capacity,  
set the maximum  
interval.  
you to configure the and  
keys.  
There are different possibilities for  
each of the keys:  
The following options are available  
according to the type of screen:  
Directory  
• validate the animated screen  
savers as default screen  
Validate Directory.  
When you press the key, you can see the  
names in the directory.  
• change its title (only downloaded  
screens)  
9. Phone adjustment  
MY_304X_EN-09.p65  
40  
28/12/01, 11:29  
41  
Rapid dial  
9.2 Selecting the display language  
Select a name from the directory and  
validate. When you press the key, you will  
automatically call the name selected.  
You can select the language in which you  
wish your phone display to operate:  
Automatic selection.  
Silent mode  
Silent mode  
The display language will be that of  
your SIM card (if available).  
Validate Silent mode.  
This mode, indicated  
on the screen saver,  
is automatically  
deactivated/  
activated when the  
hands free kit is  
connected.  
The ringing tone of your phone  
will be replaced automatically by  
the vibrator and all the beeps will  
be suppressed (except for the  
alarm).  
otherwise select the language of your  
choice using the scrolling arrows and  
validate by pressig OK.  
9.3 Select the type of response  
Call voice mail  
Validate Call voice mail.  
When you press the key you will  
You can reply to a telephone call:  
either automatically, if you have ticked  
the Automatic ans. box (for a hands  
free kit) and validated by pressing OK.  
automatically call your mailbox number.  
Text messages  
Validate Text messages.  
or by pressing any numeric key if you  
have ticked the Any key and validated  
by pressing OK.  
When you press the key you can read the  
short messages stored in the SIM card or  
in the phone itself.  
View calls  
Validate View calls  
When you press the key, you can view the  
list of the last calls made and received if  
available.  
9. Phone adjustment  
MY_304X_EN-09.p65  
41  
28/12/01, 11:29  
42  
Network  
Available networks  
Depending on  
9.4 Selecting the network  
model, you can  
choose a manual  
selection for a  
network search. A  
triangle appears in  
the antenna above  
the network icon to  
indicate the manual  
search.  
This menu enables you to start a  
search for all available networks at  
the present location and to display  
them.  
When your home  
network is not  
Every SIM subscription card can  
store an ordered list of preferred  
networks.  
accessible (abroad,  
for example), your  
phone automatically  
searches for another  
available and  
authorised network  
in the order of  
preference indicated  
by the list on the  
SIM card.  
If the list has not been  
Use the scrolling arrows to scroll  
the available networks and  
validate the one wanted (press  
).  
programmed, or if none of the  
networks on the list are available  
or authorised, the phone  
searches for an authorised  
network providing the highest  
level of signal.  
Preferred networks  
To program a list of preferred  
networks into your SIM card:  
If none of the available network  
is authorized, you can use your  
phone to make emergency calls  
only until a network connection  
can be re-established.  
Use the scrolling arrows to select  
from the list.  
Validate.  
If the network is not on the list,  
select the country code then the  
network code (ask the organisation  
from which you obtained the SIM  
card).  
If no network is available, your  
phone continues to search for  
one.  
In all cases, the phone searches  
for its home network first.  
9. Phone adjustment  
MY_304X_EN-09.p65  
42  
28/12/01, 11:29  
43  
Rapid exchange  
9.5 Setting the time and date  
If you tick the Rapid exchange  
box, the converter will operate on the  
standby screen, enter the digits required  
and use the scrolling arrows to perform a  
conversion.  
Setting time/date/Control menu  
Set the hours and minutes by pressing on  
the corresponding numbers or by scrolling  
through the values using the  
arrows.  
or  
Exchange rate  
Press  
to go to the next setting.  
Enter the conversion rate corresponding  
to the two selected currencies.  
Set the day, month and year.  
Press OK to validate.  
Currencies  
Setting time/date/Display menu  
Enter the symbols of the two currencies to  
convert. A long press on C returns to the  
beginning of the line to enter them (if the  
symbols are already entered).  
Use the scrolling arrows to select the type  
of clock to be displayed on the screen or  
to display no clock. Press OK to validate.  
9.6 Controlling screen contrast  
Control screen contrast using the scrolling  
arrows, and validate by pressing OK.  
9.7 Converting currencies  
This menu enables you to convert one  
currency into another. Using the scrolling  
arrows, you can select:  
9. Phone adjustment  
MY_304X_EN-09.p65  
43  
28/12/01, 11:29  
44  
Locked keyboard  
10.1 Locking the keyboard  
You can still make  
emergency calls and  
answer calls.  
This menu enables you to lock your  
phone’s keyboard to prevent calls from  
being made unintentionally in your bag  
or pocket.  
Tick the Lock box: the keyboard will  
automatically be locked.  
For a quick keypad  
To unlock your keyboard:  
locking, press  
Press then OK.  
*
*
then OK from the  
After unlocking, the keyboard will be  
standby screen.  
locked after a certain period.  
10.How to use the security  
features of your phone  
Warning  
10.2 Changing the PIN  
number  
If the wrong PIN  
code is entered three  
times in a row, the  
card will be locked.  
To unlock your card,  
call the organisation  
which issued your  
card for guidance in  
unlocking it.  
You can change your PIN number:  
To the question: Old pin  
number ?, enter your old PIN  
code and validate (press  
).  
To the question: New pin  
number ?, enter your new PIN  
code (a number between 4 and 8  
digits) and validate by pressing  
OK.  
If your SIM card is  
permanently locked,  
contact your  
Operator or your  
Service Provider to  
obtain a new card.  
10. Security  
MY_304X_EN-10.p65  
44  
28/12/01, 11:30  
45  
To the question: Verify pin number ?,  
enter your new PIN code a second time to  
verify and validate by pressing OK.  
If the incorrect code is entered, the  
time interval between each attempt  
increases, making use impossible.  
The phone code is a  
secret code,  
intended to protect  
the phone in the  
event of theft. It is  
linked automatically  
to the SIM card  
present on  
To change the phone code, you  
must first check that it is active  
(Control phone code menu).  
Checking the PIN number  
You can activate your PIN number so that it  
is requested and checked every time the  
phone is switched on, so that if the phone is  
lost or stolen, your SIM card cannot be used:  
To activate:  
activation.  
To the question: Phone code?,  
To the question: Pin number ?: enter your  
enter 0000 and validate (press  
).  
PIN number and validate (press  
).  
Tick the Telephone contr box and validate  
Tick the box Pin number cont and  
by pressing OK.  
validate by pressing OK.  
To deactivate:  
To the question: Phone code?, enter your  
code (possibly changed) and validate  
10.3 Changing the PIN2 number (*)  
(press  
).  
You have a second PIN number. The  
procedure for modifying the PIN2 number is  
identical to that for the PIN number.  
Do not tick the Telephone contr box and  
validate by pressing OK: it will reset the  
code to 0000.  
10.4 Changing the phone code  
Once the phone code is activated, you can  
modify it:  
The phone code menu enables you to  
activate the phone code so that it is  
requested and checked each time the phone  
is switched on, in the case of a different SIM  
card being used.  
To the question: Old phone code?, enter  
your old phone code and validate (press  
).  
10. Security  
MY_304X_EN-10.p65  
45  
28/12/01, 11:30  
46  
To the question: New phone code? enter  
your new phone code (a number of  
between 4 and 8 digits) and validate by  
pressing OK.  
You can activate, deactivate, and  
view the status of the type of call  
barring. You can also cancel ALL incoming calls or to  
The restriction can  
apply to ALL  
incoming calls when  
you are not in your  
home country (if you  
types of barring.  
To the question: Verify phone code enter  
your new phone code a second time to  
verify it and validate by pressing OK.  
have roaming).  
10.7 Limiting outgoing calls  
(*)  
10.5 Changing the operator  
password (*)  
Depending on your subscription, this  
service stops certain types of  
outgoing calls being made from your  
phone.  
Access to this  
service depends on  
your subscription  
type. For more  
information contact  
your Operator or  
Service Provider.  
You have an operator password. The  
procedure for modifying this password is  
identical to that for your PIN code.  
If you have this service, you will  
have been provided with a  
password when you subscribed.  
This password is necessary to  
activate this function.  
10.6 Limiting incoming calls (*)  
The restriction can  
apply to ALL  
outgoing calls, to all  
your  
INTERNATIONAL  
outgoing calls or to  
outgoing  
international calls  
EXCEPT those sent  
to your HOME  
country.  
Depending on your subscription, this  
service enables you to restrict  
certain types of incoming calls.  
You can activate, deactivate, and  
view the status of the type of call  
barring. You can also cancel ALL  
types of barring.  
Access to this  
service depends on  
your subscription  
type. For more  
information contact  
your Operator or  
Service Provider.  
If you have this service, you will  
have been provided with a  
password when you subscribed.  
This password is necessary to  
activate this function.  
10. Security  
MY_304X_EN-10.p65  
46  
28/12/01, 11:30  
47  
-
-
Currency: enter the currency  
name (maximum 3 characters)  
and charge per unit. Ask your  
operator for this value.  
Warning  
10.8 Setting up the pre-set  
directory (*)  
These functions  
depend on the ability  
of the network to  
send charge data to  
your phone in real  
time, and on the  
The pre-set directory allows you to  
limit calls. When you activate this  
directory, only the numbers you  
store in this directory can be called.  
This directory is  
linked to the SIM  
card. Thus, its size  
is determined by  
limitations of this  
card.  
Telephone unit.  
The Limitation menu allows you to  
activate the credit function in the  
selected currency after entering your  
PIN2 code.  
capacity or options  
on your SIM card.  
Before creating it, you must first  
activate it:  
Display the Pre-set directory  
menu.  
Enter your PIN2 number.  
Tick the Pre-set directory box.  
Validate by pressing OK.  
To create the pre-set directory,  
proceed as you would proceed for  
another directory (see chapter How  
to use the Directory/Storing a  
number).  
10.9 Charge checking (*)  
The Settings menu allows you to  
select the type of charge indication  
after entering your PIN2 code:  
10. Security  
MY_304X_EN-10.p65  
47  
28/12/01, 11:30  
48  
11.1 Calculator  
You can operate the calculator using the following  
keys:  
Add  
@
Subtract  
Multiply  
Divide  
*
#
OK  
Equals  
Delete  
C
11.Other functions  
Long press on:  
or # or @ or  
Decimal point  
*
Monetary operations if  
there is no calculation in  
progress  
(See chapter Phone  
adjustment, § 9.7).  
Monetary conversion.  
From the standby screen, you can convert a  
currency into another according to the settings  
chosen (calculator key  
) or menu (Controls/  
Currency converter).  
11. Other functions  
MY_304X_EN-11.p65  
48  
28/12/01, 11:34  
49  
The alarm function  
is represented on  
the screen by the  
11.2 Setting the alarm  
11.4 Configure your phone with a car kit  
To use your phone as an alarm  
clock:  
(Depending on the model)  
To use your phone  
with a hands free kit,  
see the notes  
symbol  
.
As regards the phone, there are  
several options:  
Permanent flashing  
of this symbol  
Using the numbers or the  
scrolling arrows, set the alarm  
time.  
supplied with the kit.  
indicates that an  
alarm time has been  
programmed but the  
date and time clock  
has not been  
Programming the switch-off delay  
on your phone  
Press  
to go to the next item.  
Set the phone off delay using the  
numbers or scrolling arrows.  
Set the minutes.  
This delay starts  
counting down as  
soon as the end of a  
call is detected.  
initialised.  
Tick the box and validate by  
pressing OK.  
Press  
to go to the next item.  
Tick the box and validate by  
The ringer is stopped by pressing any key;  
the alarm remains programmed.  
pressing OK.  
Programming the alarm timing  
This can only  
happen when the  
vehicle is not  
running.  
The alarm function remains active when the  
phone is switched off. It is not affected by  
silent mode.  
You can be notified that your phone  
is ringing when you are not in your  
car.  
Set the delay after which an external warning is  
set off using the digits or scrolling arrows.  
11.3 Setting the timer  
Tick the box and validate by pressing OK.  
The same procedure is applied as for the  
alarm function, but in this case you start a  
time clock running against a defined value.  
The phone must remain switched on.  
11.5 Data parameters  
You can set the serial link speed when using AT  
commands.  
11. Other functions  
MY_304X_EN-11.p65  
49  
28/12/01, 11:35  
50  
From the standby screen, press on  
the @ key to access the local menu  
for WAP functions.  
Depending on  
model, scrolling  
menu 0 allows you  
to access the WAP  
function.  
Home: connection to the home  
page.  
Bookmarks (depending on model):  
from the standby screen, following a  
number key with the @ key initiates  
access to the favourite  
This menu enables  
you to record a  
directory of Internet  
site names and  
addresses for easy  
and fast access.  
corresponding with the number.  
You can receive bookmarks by SMS  
and add them to this list (see SMS chapter).  
You can also send some by SMS: select a  
bookmark, press (Options), then select  
Send by SMS.  
12.WAP Function  
Mobile Internet  
Go to URL (depending on model): this menu  
enables you to directly enter an Internet  
address.  
WAP: Wireless Application Protocol – This is a protocol which converts Internet  
language into the language which can be understood by a mobile telephone.  
The WAP browser is licensed from:  
Advanced...: access to the sub-menus:  
Connection settings which allow  
you to set the parameters for  
several access providers  
(depending on model). The  
current access service has a star  
in front of it.  
All of the information  
to be entered in the  
settings is supplied  
by your Operator or  
Service Provider.  
The WAP browser remains the exclusive property of Phone.com. It is therefore  
highly prohibited to modify, translate, reverse engineer, de-compile or  
disassemble the Phone.com browser or any part thereof.  
12. WAP Function  
MY_304X_EN-12.p65  
50  
28/12/01, 11:36  
51  
Configuration of WAP parameters  
FastW@p (depending on model) which  
provides quicker access to the pages of  
Internet sites.  
-
Select the desired access service using  
the scrolling arrows then press on  
Modify ( key).  
Reset cache: empties data stored from  
previous connections.  
-
The parameters to be entered are:  
the name of the service,  
a user name,  
Quit: return to the phone standby screen.  
a password,  
The q icon enables you, by pressing the @  
key, to access two display modification  
possibilities:  
the IP address of the WAP gateway:  
enter the IP number using the @ key  
(Next) then choose Secure or Non  
secure,  
-
the zoom to change the size of characters by  
pressing on successively  
the call number,  
the access mode (digital or analog).  
-
full screen display by pressing on  
.
Once all the parameters entered, you  
can activate the selected service.  
Confirm your choice with OK.  
Connection  
-
When connecting on  
the GSM network,  
the @ character  
flashes, and the cost  
of communications  
starts to clock up as  
soon as it stops  
flashing.  
From the Home menu, start up  
connection to a service.  
• Show URL which presents the current  
Internet address.  
Once connected to a service,  
press on q then [Menu] to return  
to the local menu.  
• Disconnect which ends the communication  
(allows a navigation whithout being  
connected).  
• Linger timer enables you to set a time  
limit, after which the phone will disconnect  
automatically if you have forgotten to  
disconnect from a service.  
12. WAP Function  
MY_304X_EN-12.p65  
51  
28/12/01, 11:36  
52  
Disconnection  
You will be automa-  
tically disconnected  
after a short pause if  
you have forgotten  
to disconnect from a  
service.  
Disconnection is achieved by  
pressing on q then [Menu] and  
then by using the Advanced...  
menu and Disconnect.  
The @ character disappears  
from the screen.  
Exit from the WAP function  
To exit from the browser and end  
the current communication (if  
necessary):  
press  
.
or  
from the local menu, select Quit  
and validate by pressing OK.  
12. WAP Function  
MY_304X_EN-12.p65  
52  
28/12/01, 11:36  
53  
Depending on the model, several games are  
available. The presentation menu guides you  
on how to best use them.  
13.Games  
13. Games  
MY_304X_EN-13.p65  
53  
28/12/01, 11:37  
54  
Depending on the model,  
different accessories are  
available on your phone:  
Warning  
Do not connect/  
disconnect the  
special socket on  
your phone during a  
call.  
The use of the  
EXTERNAL SIGNAL  
function to activate  
the lights on a  
vehicle or the horn,  
in order to take a  
call on a public road,  
may not be  
Additional batteries  
Additional chargers  
Desk charger  
Cigarette lighter adapter  
Hands-free kits  
Coloured front panels.  
14.Available accessories  
authorised.  
14. Available accessories  
MY_304X_EN-14.p65  
54  
28/12/01, 11:37  
55  
Upkeep  
Warning  
Clean your phone using a soft  
slightly damp non fluffy cloth.  
Certain chemical  
products can  
damage plastic. Do  
not use aerosols,  
certain special  
Battery  
cleaning products,  
corrosive products,  
solvents, alcohol  
and detergents.  
After a long period of non use  
(several months), when the charger  
is being connected, the unit might  
not switch on.  
In this case:  
15.Upkeep  
Disconnect the charger, wait a  
few seconds, and plug it in again.  
It may be necessary to repeat  
this several times.  
Maintenance menu  
This menu contains information that  
you could be asked for to perform  
specific operations. If they are  
rquired, you will be shown how to  
find information you need.  
15. Upkeep  
MY_304X_EN-15.p65  
55  
28/12/01, 11:38  
56  
The use of your phone is controlled  
by safety regulations intended to  
protect both the user and his/her  
environment.  
CE marking on the  
unit conforms to  
directives 1999/5/  
EC, 89/336/CEE  
and 73/23/CEE.  
Electrical safety  
Only use the appropriate chargers  
contained in the manufacturer’s  
catalogue. Using another charger  
could be dangerous and will  
invalidate the manufacturer’s  
warranty.  
16.Recommendations  
The main plug socket must be  
easily accessible.  
The main voltage should  
correspond to that given on the  
manufacturer’s plate on the  
charger.  
16. Recommendations  
MY_304X_EN-16.p65  
56  
28/12/01, 11:39  
57  
The phone must be shielded  
sufficiently from electronic  
equipment in the vehicle. It gives off  
micro-waves, which may affect the  
operation of such equipment.  
Warning  
Airplane safety  
Ensure that no part  
of your body is  
permanently close to  
the aerial unless  
there is a metal  
screen (e.g.: a  
In an airplane, your phone must be switched  
off to ensure that it does not interfere with  
the planes systems. Its use is illegal and you  
could be prosecuted or banned from using  
cellular networks in the future if you do not  
abide by these regulations.  
Installation of your phone in a  
vehicle must only be performed  
by qualified personnel.  
vehicle roof, ꢀ).  
Non ionising radiation  
Areas containing combustibles  
To obtain maximum satisfaction from your  
It is advisable to switch your phone off in the  
vicinity of gas stations.  
phone, use it in a vertical position. Your  
personal safety can only be improved by  
doing so.  
Regulations limit the use of radio equipment  
in chemical factories, gas depots and any  
area where there are mines. You are advised  
to abide by these rules.  
Electronic medical equipment  
Your phone emits radio waves that could  
possible interfere with electronic medical  
equipment, for example an auditory  
Road safety  
prosthesis, heart pacemakers, ꢀ Your  
doctor or the manufacturer of the medical  
item will be able to advise you on whether  
your phone could cause such interference.  
Except in an emergency, do not use your  
phone when driving without a hands-free kit  
that enables you to maintain your freedom of  
movement. Always keep your eyes on the  
road when you are driving. To make a call,  
pull to the side of the road, then make your  
call. Abide by the current laws.  
In hospitals, the phone must be switched  
off.  
16. Recommendations  
MY_304X_EN-16.p65  
57  
28/12/01, 11:39  
58  
You are strongly advised not to  
connect your phone to the  
charger if it doesn’t contain a  
battery.  
Warning  
General precautions  
The constructor  
cannot be held  
responsible if the  
above  
recommendations  
are not followed or if  
the phone is  
• Do not attempt to open your phone and  
repair it yourself. The manufacturer cannot  
be held responsible for any damage/  
accident that may result from this.  
To avoid the risk of  
demagnetisation, do not let  
electronic devices close to your  
phone for a long time.  
• Any work carried out by non-authorised  
personnel will invalidate your warranty.  
incorrectly used.  
• Do not use your phone in damp areas  
(bathroom, swimming pool, ꢀ). Protect it  
from water and other liquids.  
• Do not expose your phone to extreme  
temperatures.  
• Do not leave your phone within the reach  
of small children (certain removable parts  
may be accidentally ingested).  
Note on downloading facilities  
You can use your mobile phone to download ringing tones, icons and  
animated screen savers. Some of these items may contain data that  
causes your mobile phone to malfunction or to lose data (viruses for  
example).  
• Use your phone with original accessories,  
or your warranty will be rendered invalid.  
• The physicochemical processes created  
by chargers impose temperature limits  
when charging the battery. Your phone  
automatically protects the batteries in  
extreme temperatures.  
Sagem declines all responsibility for (1) the reception of data that has been  
downloaded or loss of said data, (2) the consequences on the operation of  
the mobile phone and (3) damage resulting from the reception of said  
downloaded data or loss of said data. Moreover, Sagem draws attention to  
the fact that problems caused by the reception of downloaded data that  
does not comply with Sagem’s specifications are not covered by the  
guarantee. Consequently, the cost of diagnosing and repairing mobile  
phones affected by said downloaded data will be charged to customers.  
• Removing the battery may mean that the  
time is lost.  
The software program developed by SAGEM remains the exclusive  
property of SAGEM SA. It is therefore highly prohibited to modify, translate,  
de-compile or disassemble this software program or any part thereof.  
16. Recommendations  
MY_304X_EN-16.p65  
58  
28/12/01, 11:39  
59  
not cycling: disconnect the charger, re-  
connect and then check the battery  
charging indicator: if it is still not cycling,  
disconnect the charger and re-connect  
several times.  
Answers to your questions  
The telephone does not turn on  
Remove the battery and then replace it.  
or  
If the battery is still not charging, contact  
the after sales service.  
Connect the phone to the charger (check  
that this is plugged in) for approximately  
5 minutes.  
When the battery charging indicator is  
continuously on, the battery is fully  
charged.  
No network recognised  
Error message: BATTERY STATUS NOT  
KNOWN  
Remove the SIM card. Check that there is  
no dust or grit in the SIM slot. Replace the  
SIM card being sure to push it right up to  
the stop point.  
The battery pack is not recognised by the  
phone. Check that the battery pack is  
correctly fitted in the phone.  
Calls to a messaging service or voice  
server do not get through  
Error message: LOW BATTERY  
Check in the Ringing and beeps/Tones  
menu that the box is ticked.  
This message is displayed when the  
battery charge is too low. The phone turns  
off automatically. Charge the phone.  
Unable to turn the phone on  
Error message: SIM NOT PRESENT  
Charge the phone for 15 minutes before  
turning it on.  
Check that the SIM card has been  
inserted correctly.  
Check the battery charging indicator:  
cycling: charging normally  
Answers to your questions  
MY_304X_EN-QR.p65  
59  
28/12/01, 11:39  
60  
Examine the SIM card. If it is damaged,  
contact your mobile phone operator sales  
point. If the message is still displayed,  
contact the after sales service.  
Error message: SIM LOCKED  
The Operator may require certain types of  
SIM card to be used. This message  
indicates that the SIM card is not accepted.  
Error message: INCORRECT PIN  
Remove the SIM card and turn the phone  
on again. If you get the SIM not present  
error message, check with your phone  
dealer whether your SIM card is compatible.  
Otherwise, contact the after sales service.  
The PIN has been incorrectly entered. If  
the PIN is entered incorrectly three times,  
the SIM card is blocked.  
Error message: SIM BLOCKED  
The phone display does not change  
The PIN has been incorrectly entered  
three times. Use your Personal  
Unblocking Key (PUK) to unblock the SIM  
card.  
Press a key. If nothing is displayed, check  
the position of the SIM card. If the problem  
continues, contact the after sales service.  
Enter:  
No connection made  
**05*PUK*PIN*PIN#  
Check the form of the number called.  
PUK: your PUK code supplied by your  
Operator.  
Check that there is at least one field  
strength dot showing. If R is displayed but  
there is no mobile phone operator name,  
only emergency calls are allowed.  
PIN: your PIN code.  
After 10 (or 5 depending on the type of  
SIM card) unsuccessful attempts, the SIM  
card is blocked permanently. You must  
then contact your Operator to get a new  
card.  
Check that you have not used all your credit  
with the mobile phone operator.  
Check that the SIM card provides the  
service you required and that it has not  
expired.  
Answers to your questions  
MY_304X_EN-QR.p65  
60  
28/12/01, 11:39  
61  
Check and, if necessary, disable the  
outgoing call lock.  
No voice box  
Check that the SIM card provides this  
service.  
The network is saturated. Please try later.  
If you still have problems getting a  
connection, contact the Hotline.  
Set up the redirection to the voice box  
using the information provided by the  
Operator.  
Unable to receive calls  
Try to make a call to check that the phone  
and the network are operational.  
Check and, if necessary, disable the  
permanent call redirection (permanent call  
redirection icon displayed).  
Check and, if necessary, disable the  
incoming call lock.  
If you still have problems receiving calls,  
contact the Hotline.  
Cannot send messages  
Check that the SIM card provides this  
service.  
Check that the message server is  
correctly set up.  
Try to make a call to check that the phone  
and the network are operational.  
Try sending the message later.  
Answers to your questions  
MY_304X_EN-QR.p65  
61  
28/12/01, 11:40  

West Bend QUIKSERVE User Manual
Toastmaster ME12DPB User Manual
Tannoy T303 User Manual
Sony SMP N100 User Manual
Seagate ST3320820ACE User Manual
Seagate CFS270A User Manual
Seagate BARRACUDA XT SERIES SATA ST32000641AS User Manual
Samsung Gleam User Manual
Oregon Scientific RMR802 User Manual
Nokia Cell Phone E90 User Manual