Roku Music Player User Manual

SoundBridge Network Music Player  
User Guide | Software v2.5  
TABLE OF CONTENTS  
SECTION 1: GETTING STARTED  
SECTION 3: THE SONG QUEUE........................24  
Building a Song Queue.....................................24  
Reviewing a Song Queue..................................25  
Erasing a Song Queue .......................................25  
I. Music Server Software Requirements..4  
II. Enabling Music Sharing ..........................8  
III. Hooking Up Your Home Network  
Hardware (Wired Ethernet or Wireless)..........10  
IV. Hooking Up Your Speakers  
SECTION 4:  
ADDITIONAL PLAYBACK OPTIONS................26  
Playing a Playlist..................................................26  
Repeat and Shuffle..............................................26  
Search Options.....................................................27  
or Stereo System......................................10  
V. Connecting SoundBridge  
to AC Power................................................12  
VI. Using Your Remote Control....................12  
VII. Establishing a Network Connection.....12  
VIII. Setting Display Preferences ...................15  
IX. Checking for the Latest Software .........15  
X. Wall or Under-Cabinet  
SECTION 5: PRESETS..........................................28  
Recalling Presets.................................................28  
Editing Presets Using the Web Interface.......28  
Mounting (optional).................................15  
SECTION 6: INTERNET RADIO.........................30  
Browsing Internet Radio Stations...................31  
Find Station URLs Using  
SECTION 2: BROWSING MUSIC........................16  
Choosing Your Music Library............................16  
Remote Control Quick Reference....................17  
The Home Menu..................................................19  
Browsing Your Music by Album.......................20  
Browsing by Artist or Composer.....................22  
Browsing by Song...............................................23  
Browsing by Genre..............................................23  
Roku Radio Snooper.................................31  
Playing Internet Radio from iTunes ...............31  
Customizing Favorites and Presets for  
Internet Radio............................................33  
Saving Stations Originating in  
iTunes to Presets.......................................35  
Memorizing a Radio Playlist............................36  
Playing Stations Saved as “My Favorites”  
or “Presets”.................................................37  
2
Playback Limitations of Internet  
Radio Streams............................................37  
Discovering More Internet  
FLAC and Ogg-Vorbis Transcoding................47  
Programming a Universal  
Remote Control.........................................47  
Radio Stations............................................37  
SECTION 10: OPTIONS FOR  
SECTION 7:  
SYSTEM CONFIGURATION ..............................48  
Software Version & Updates............................48  
Select Wi-Fi SSID & Password...........................48  
Show Wired Ethernet Status............................48  
Show Wi-Fi Status...............................................48  
Network Control.................................................48  
Reset to Factory Defaults..................................48  
Restart SoundBridge..........................................48  
Safe Mode.............................................................48  
Roku Control Protocol (RCP)............................49  
Geeks — Read This.............................................49  
SOUNDBRIDGE WEB INTERFACE...................38  
Launching the Roku Web Interface...............38  
Now Playing ........................................................39  
Presets ...................................................................39  
Configuration ......................................................41  
Status ....................................................................41  
SECTION 8: WHEN YOU ARE FINISHED  
USING SOUNDBRIDGE .....................................42  
SECTION 9: ADVANCED FEATURES ...............43  
Brightness, Contrast, Font,  
SECTION 11: Appendices..................................50  
1A: MENUS OVERVIEW........................................50  
1B: SCREEN ICONS QUICK REFERENCE...........52  
2: WI-FI SETUP HELP............................................53  
3: END USER SOFTWARE LICENSE  
and Text Display........................................43  
Brightness & Time Format While  
in Standby...................................................43  
Settings..................................................................43  
Music Visualizer Settings...................................43  
ClockSettings.......................................................44  
Language Setup .................................................46  
Standby and Reboot Options..........................47  
WMA Lossless Transcoding...............................47  
AGREEMENT...............................................66  
4: LIMITED WARRANTY .....................................67  
5: REGULATIONS AND SAFELY..........................69  
3
SECTION 1: GETTING STARTED  
To use SoundBridge you will need to do the following (detailed explanations follow):  
I. Make sure you have a compatible music server installed. Compatible music servers include  
iTunes,® Microsoft® Windows® Media Connect, Rhapsody,™ Musicmatch,® and others.  
[Note: If you plan only to listen to Internet radio, you can skip this step because no music  
server is needed.]  
II. Connect SoundBridge to your Ethernet or Wi-Fi home network.  
III. Connect SoundBridge to powered speakers or your home stereo system’s receiver or  
amplifier.  
IV. Plug in SoundBridge to AC power (there is no “on/off” switch).  
V. Put batteries into your SoundBridge remote control.  
VI. Establish a network connection. If you are using Wi-Fi and have WEP security enabled, you  
will need to enter your security key with SoundBridge’s remote control.  
VII. Enable any music sharing options required by your music server:  
a. Windows Media Connect: authorize SoundBridge as a recognized device.  
b. iTunes: enable Music Sharing feature in Preferences menu.  
c. Rhapsody: enable Music Sharing from the UPnP tab in the Options menu.  
d. Musicmatch: enable Music Sharing feature and UPnP option in Options menu.  
VIII. Select and connect to your music library.  
IX. Play music: Using your remote control, find a song you want to play, then press Play [ϐ] to  
play it immediately or Add [+] to add it to the Song Queue.  
I. Music Server Software Requirements  
Roku SoundBridge is designed to act as a remote client for several kinds of music libraries,  
including Windows Media Connect, Rhapsody, Musicmatch and iTunes. You can also play WMA  
and DRM WMA files purchased from popular online music stores such as Napster.(Apple’s  
policy does not allow SoundBridge to support playback of protected AAC files purchased from  
the iTunes Music Store.)  
Section 1: Getting Started  
4
1
What Is a “Music Server”?  
SoundBridge is a network music player. That is, it doesn’t store any music, but plays files that  
you have stored on a computer connected to your home network. (It can also play Internet  
radio without connecting to your computer, using a direct connection to the Internet.) To play  
the music files stored on your computer, SoundBridge needs to receive data from software  
installed on the computer that “serves” the music. This “music server” is responsible for  
streaming the music to SoundBridge. It is also responsible for sending the list of music you  
have available to SoundBridge (when asked), and performing searches of the music library at  
SoundBridge’s request.  
You probably already have a music server but perhaps didn’t realize it. For example, iTunes acts  
as a music server when it shares music to another iTunes user on the network. Microsoft has  
released its own music server, Windows Media Connect.  
The most common music servers are iTunes, Windows Media Connect, and Rhapsody. But there  
are others. If you want to use a Microsoft PlaysForSure music service, you must use Windows  
Media Connect. If you want to use the Rhapsody music service, you currently must use  
Rhapsody as your music server. One of the benefits of SoundBridge is that it supports all the  
common servers out there with an easy-to-use interface.  
Note: For playing back Internet radio using SoundBridge’s “Radio Favorites” library, you don’t  
need a music server, because SoundBridge receives the radio stream directly from the Internet.  
SoundBridge Has Two UI Modes  
Each music server has different capabilities. To experience the full SoundBridge user interface,  
which includes searching and robust browsing modes, you must use a server that supports  
these functions, such as iTunes or Windows Media Connect. Some other servers don’t have the  
functionality required to deliver the full SoundBridge feature set. For example, you won’t be  
able to search, and the browse modes will vary by server.  
Section 1: Getting Started  
5
You have several options for connecting your music library to SoundBridge:  
Music Server  
Recommended for Users  
of . . .  
Notes  
Windows Media Connect  
(UPnP Windows Media DRM  
10 protocols)  
Windows XP with SP2  
A free media server from Microsoft. Works with any music jukebox,  
but optimized for Windows Media Player v.10. Supports SoundBridge’s  
full Browse, Search and Display feature set. Plays: WMA, DRM WMA*,  
WMA Lossless, MP3, WAV, playlists created in jukebox software such as  
Windows Media Player 10.  
iTunes  
PC/Mac  
A free music server and jukebox software from Apple. Plays: AAC, MP3,  
WAV, AIFF (no support for protected AAC iTunes Music Store files). Also  
plays playlists and Smart Playlists created in iTunes. Built-in Internet  
radio tuner streams Internet radio to SoundBridge.  
(Bonjour, formerly known as  
Rendezvous, for discovery;  
iTunes DAAP for communication)  
Rhapsody  
(UPnP and proprietary  
Rhapsody protocol)  
Rhapsody Subscribers  
Server required to run the Rhapsody Music Service, which includes  
access to popular music and Internet radio.  
Musicmatch Jukebox  
(UPnP AV protocol)  
Windows 98 SE/Me/XP/2000  
(SP3 or above)  
Popular jukebox software and music service. Has a built-in UPnP AV  
server supported by SoundBridge. You can also use Windows Media  
Connect with Musicmatch, which is more feature-rich. Plays: WMA,  
MP3, WAV (DRM WMA and Musicmatch playlists supported only if  
using Windows Media Connect Server).  
Firefly Media Server  
PC/Mac/Linux  
This high quality “open source” media server will serve music in many  
formats (WMA, MP3, AAC, FLAC, Apple Lossless and Ogg Vorbis). It  
integrates directly with iTunes and can share your iTunes music library,  
or any music library. As with all non-apple products, it does NOT  
support Protected AAC files. It does not support protected WMA files. It  
does support SoundBridge’s full Browse, Search and Display feature set  
as well as playlists and Smart Playlists created in iTunes.  
For a more detailed comparison of compatible music servers and links to download them, visit  
Section 1: Getting Started  
6
1
Installing a Compatible Music Server  
To access network music sharing, make sure you have a compatible music server installed.  
Compatible music servers are listed on the previous page. To install one of these, follow the  
instructions below.  
Installing Windows Media Connect  
1. If not already installed, install Windows XP Service Pack 2, a free download from Microsoft  
or via Windows Update Installer.  
2. Download the latest version of Windows Media Player, v.10, a free download from Microsoft  
or via Windows Update Installer.  
3. Download Windows Media Connect, a free download from Microsoft, or via Windows  
Update Installer.  
4. Continue to “Enabling Windows Media Connect.”  
Installing Firefly Media Server  
2. Continue to “Enabling Firefly Media Server.”  
Installing iTunes  
SoundBridge requires v. 4.0 or later.  
2. Continue to “Enabling iTunes.”  
Installing Rhapsody  
2. Continue to “Instructions for Enabling Rhapsody.”  
Installing Musicmatch Jukebox  
1. If not already installed, download a free version of Musicmatch Jukebox 9.0 on your PC from  
2. Continue to “Enabling Musicmatch Jukebox.”  
Section 1: Getting Started  
7
II. Enabling Music Sharing  
After installing a music server, you need to enable your music server to share data with your  
SoundBridge.  
Enabling Sharing in Windows Media Connect  
To authorize SoundBridge as a permitted client for Windows Media Connect, follow these  
steps:  
1. Click the Windows Media Connect tray icon or open Windows Media Connect through the  
Windows Control Panel. The SoundBridge device appears in the notification area in the  
bottom-right corner of the window.  
2. Open the Wizard window, click the SoundBridge device and then click Allow. Windows  
Media Connect will now authorize SoundBridge.  
3. Click Close.  
Enabling Sharing in Firefly Media Server  
You do not need to enable the Firefly Media Server to share music. However, the program must  
be running in order to play music on your SoundBridge.  
Section 1: Getting Started  
8
1
Enabling Sharing in iTunes  
To turn on the Music Sharing option,  
1. Select iTunes/Preferences menu (Mac) or Edit/Preferences (PC).  
2. In the dialog box that appears, click the Sharing tab.  
3. Verify that the Share My Music option to enable sharing on your local network is selected.  
Note: iTunes must be running to play music from your library.  
Enabling Sharing in Rhapsody  
1. Make sure the Rhapsody application is running.  
2. Select User Settings from the Options menu.  
3. Navigate to the UPnP tab, and then click Start to start the server.  
4. Select the Start UPnP server once logged in option so that the server starts each time you  
run the Rhapsody application.  
Your Rhapsody server should now appear in your list of music servers on SoundBridge, and you  
can play all your songs and Rhapsody radio stations.  
Note: Rhapsody must be running to enable automatic log in.  
Enabling Sharing in Musicmatch  
1. Select Options/Settings.  
2. Click the CD Lookup/Connectivity tab.  
3. Select Enable Music Server and then select Universal Plug and Play. You can close  
Musicmatch if you like — the UPnP server will keep running in the background.  
Section 1: Getting Started  
9
III. Hooking Up Your Home Network Hardware (Wired Ethernet or Wireless)  
Ethernet Connection  
Plug your cable into the jack provided on the right side of the rear of the unit. Connect your  
Ethernet cable to a hub, switch or router on your home network. Alternatively, you can connect  
SoundBridge directly to your computer (and bypass a hub/switch/router), but only with a  
“crossover” cable (sold separately). Connect the other end of the cable to your network.  
Wireless Connection  
No need to install any additional hardware into SoundBridge. Please note that most, but not  
all, wireless access points are compatible with SoundBridge. You can find a list of supported  
IV. Hooking Up Your Speakers or Stereo System  
Connect your choice of audio cables into the back left side of SoundBridge depending on your  
preferred connection option.  
Audio cable connectors  
Digital Audio Outputs  
Optical Coax  
AC Adapter Connection  
Analog 1/8” Miniplug  
Wired Ethernet  
Network Connection  
Section 1: Getting Started  
10  
1
Your SoundBridge has several audio connection options:  
a. Connect your SoundBridge to a set of powered speakers by inserting the 1/8” cable from  
your powered speakers into the Analog 1/8” Miniplug connector on SoundBridge.  
Note: If your speakers have a male connector, you will need a female-to-female coupler  
available from Radio Shack.  
b. Connect the RCA (red/white) audio cable included with your SoundBridge to your stereo  
system’s Aux or other “Line Input” and connect the other end of this cable to SoundBridge’s  
Analog 1/8” Miniplug connector.  
c. Connect to your stereo system using either coaxial SPDIF digital or optical SPDIF digital  
(the SoundBridge has connectors for both) — cables sold separately.  
Section 1: Getting Started  
11  
V. Connecting SoundBridge to AC Power  
If you plan to use an Ethernet connection, be sure the cable is plugged in to the unit. Plug the  
power cord into the SoundBridge unit, and plug the other end into to a wall outlet.  
Hint: There is no power switch to turn on SoundBridge. As soon as you plug in the power,  
you should quickly see the welcome message “Roku SoundBridge.” If not, please stop and  
ensure that your power cable is connected properly on both ends.  
VI. Using Your Remote Control  
The SoundBridge remote control is an infrared remote, so it needs “line of sight” to  
SoundBridge in order to operate. Point the remote in the direction of your SoundBridge,  
and make sure that the IR receiver window is not blocked by another object..  
VII. Establishing a Network Connection  
Note: Do not plug in an Ethernet cable if you plan to use your wi-fi network to avoid confusion  
in the setup of the device. Also, if you plan to use an Ethernet connection, make sure the cable  
is connected before powering up the device.  
Wired Ethernet Network: After you have connected SoundBridge to your computer via a  
switch/hub/router (or directly to your computer via crossover cable) and powered up the unit,  
SoundBridge will auto-configure its network settings (using DHCP or AutoIP). There is nothing  
you need to do. If for some reason you have trouble connecting to your network, select the  
“System Configuration” option, then select “Show Wired Ethernet Status.”  
Wireless Network: If you have an open and visible Wi-Fi network in your home (one which  
broadcasts its name, and which has no security keys set) then SoundBridge will auto-connect  
to your wireless network. However, you will be asked to enter your network’s name (SSID) if:  
- SoundBridge detects more than one Wi-Fi network (as some advanced users have in their  
home, or if your neighbor’s signal is leaking over), or  
- Your Wi-Fi network does not broadcast its name (for security reasons)  
Section 1: Getting Started  
12  
1
In these cases, enter the SSID using the remote control. Use the left/right Ð Æꢀarrows to choose  
letters, and use the up/down Â Ì arrows to change to Uppercase and to other character sets  
(numbers, international characters) and to enter “Space”, “Delete” and “OK” when you’re done.  
SoundBridge supports networks with WEP security. WPA is not yet supported. If you have a  
WEP security key, you will need to enter your WEP key manually into SoundBridge. This is the  
same key you have entered into your Access Point and your computer. Your screen will look  
something like this:  
No Music Libraries Found (Why?)  
6\VWHPꢀ&RQÀJXUDWLRQ  
Scroll down using your remote control’s Down Ì arrow until the option “System Configuration”  
is highlighted, and press Select [] on your remote control. You will see a screen that looks like  
this:  
Software Version & Updates  
Select Wi-Fi SSID & Password  
Show Wired Ethernet Status  
Show Wi-Fi Status  
Navigate down to “Select Wi-Fi SSID & Password” and enter your wireless network name and  
password.  
For additional help connecting to your network, including password help, see the Wi-Fi setup  
section in the appendix of this guide.  
Section 1: Getting Started  
13  
Personal Firewall  
If you are using iTunes and have trouble connecting, your computer may have a firewall  
installed that is not set correctly. Make sure your firewall is configured to allow iTunes music  
sharing by doing the following:  
Mac users:  
1.Open System Preferences.  
2. Select Sharing and click the Firewall tab.  
3. Select the iTunes Music Sharing option.  
4. Restart your SoundBridge by unplugging, wait 5 seconds, then plug it back in.  
PC users:  
1. Refer to your firewall’s documentation for opening incoming ports.  
2. Configure your firewall to allow incoming connections on port TCP 3689 and UDP 5353.  
WindowsXP Service Pack 2 users:  
1. Open Security Center and click on “Windows Firewall” at the bottom right of the window.  
2. In the window that pops up, click on the Exceptions tab.  
3. Verify that iTunes appears in the list of Programs and Services. If iTunes is not listed, select  
the iTunes check box and then click OK.  
After these changes have been made, restart your SoundBridge by unplugging it, waiting 5  
seconds, and plugging it back in.  
For additional help with Firewall troubleshooting, please visit the troubleshooting section of  
forums.  
Section 1: Getting Started  
14  
1
VIII. Setting Display Preferences  
The brightness of your display can be adjusted by pressing the Bright [н] button.  
Text size and fonts can also be controlled for the SoundBridge M1000’s VFD display by pressing  
the Bright [н] button.  
Also, from the Home Menu, you can navigate down to the “Settings” option to change certain  
options, such as the style of music visualizer, whether the music visualizer appears full screen  
during playback, and what kind of information is displayed when a song is playing.  
For a complete list of SoundBridge settings, please see the “Advanced Features” section of this  
user guide.  
IX. Checking for the Latest Software  
When a software update is available, your SoundBridge will automatically offer you the choice  
to upgrade. Please take a minute to do so.You’ll just need SoundBridge connected to a network  
with a high-speed Internet connection.  
Note: You will be offered the chance to upgrade when coming out of standby mode or after  
accessing your “source” menu (which lists your available music libraries and Internet radio). If  
for some reason you never access this menu, like you always stay connected to the same library,  
we recommend checking for new software manually.  
See Options for System Configuration section for instructions on how to check for new  
software manually. Roku will release a revised user guide in PDF format periodically to explain  
new features or functions that have been added to the SoundBridge software. Please visit  
www.rokulabs.com/support to download the latest manual.  
X. Wall or Under-Cabinet Mounting (optional)  
SoundBridge ships with a portable black rubber table stand which looks great on your shelf or  
allows SoundBridge to be mounted to the wall or under a cabinet using a sleek, hidden bracket  
which screws into your wall. For more information, please visit the Roku web site at  
Section 1: Getting Started  
15  
SECTION 2: BROWSING MUSIC  
Choosing Your Music Library  
Once SoundBridge is successfully connected to your network and your server’s music sharing  
options are enabled, SoundBridge will automatically find any supported music libraries on the  
network. You will be prompted to choose the library you would like to access from a screen that  
looks something like the one on the left:  
“Change Library or Configuration” Menu  
Play Dan’s Music  
Ë Play Joe’s Music  
Playlist  
Browse  
Search  
Play Preset  
Play Internet Radio  
ꢀ ꢀ 6\VWHPꢀ&RQÀJXUDWLRQ  
6KRZꢀ6RQJꢀ4XHXH  
1RZꢀ3OD\LQJ  
6HWWLQJV  
&KDQJHꢀ/LEUDU\ꢀRUꢀ&RQÀJXUDWLRQ  
Navigate to your preferred library (in this example, “Joe’s Music”) and press Select []. You will  
then see the “Home Menu” (see above at right), where you can begin browsing and playing  
your music.  
To change to a different library, or to play Internet radio, select the “Change Library or  
Configuration” option located at the bottom of SoundBridge’s Home Menu (accessible by  
pressing the Home Menu [ ].  
Hint: SoundBridge will automatically connect to the last library you were connected to when  
awakened from Standby. Use the “Change Library or Configuration” option to select a different  
library.  
Section 2: Browsing Music  
16  
Remote Control Quick Reference  
1
2
3
4
5
6
VOLUME  
PRESETS  
Current Remote  
New Remote (Rendering)  
Button  
Button  
Name  
Action  
old remote  
new remote  
Up/Down  
Left/Right  
Navigates through available selections in the list.  
‚·  
ꢀꢁ  
“FastBrowse.” When browsing for an artist alphabetically, you skip from one letter of  
the alphabet to another.  
Ň  
ꢂꢃ  
Select  
Selects any item shown on the SoundBridge display. Pressing Select is like clicking  
your mouse on a highlighted item.  
Play  
Begins playing current selection.  
Pauses currently playing song.  
Pause  
Section 2: Browsing Music  
17  
Button  
Button  
Name  
Action  
old remote  
new remote  
Add  
Adds current selection to your Song Queue.  
Takes you to the Source or Home Menu.  
+
+
Home  
Search  
Displays text based search options.  
Browse  
Exit  
Browse through songs by title, artist, album, composer or genre.  
Takes you one step backward and works like the Back button on your Internet browser.  
Pressing Exit repeatedly displays information about the song currently playing.  
Ѷ
Ѷ
Standby  
Stops playing the current selection and puts SoundBridge Radio in standby mode.  
Adjust Display  
Adjusts brightness and size of display information when used with Up/Down and  
Left/Right buttons.  
Volume  
Adjusts the volume.  
Next/Previous  
Track  
Moves you forward or backward in your Song Queue, one song at a time.  
ꢀ ꢁ  
ꢀ ꢁ  
Shuffle  
Repeat  
Plays Song Queue in random order.  
Continuously plays back your Song Queue.  
Searches for Internet radio stations.  
Internet  
Radio  
Server  
Returns you to the last music server accessed.  
Section 2: Browsing Music  
18  
Use these commands on your remote control to select and play music:  
Use the Up and Down arrow buttons to take you through a list item by item. Use the Select  
[] button to take you one level down into the highlighted item (think of it as double-  
clicking a selected item).  
2
Use the Left and Right Ð Æꢀarrow buttons to “fast browse” a list of music options by  
skipping to the next or previous letter of the alphabet, or if your list is not arranged  
alphabetically, by about 5% of your list at a time. Then use the Select [] button to choose  
an item to play.  
Use the Back [ϱ] button to go one step backward while browsing, much like the Back  
button on your Internet browser. (Pressing Back repeatedly displays the “Now Playing”  
screen, with information about the song currently playing.) On the new remote use the  
The Search [ѣ] button takes you to your text-based search options (if supported by your  
music server).  
When you find a selection you want to play, you can use the Play [ϐ] button to play it, or the  
Add [+] button to add your current selection to the end of your Song Queue.  
The [ ] button pauses playback of audio currently playing; pressing again resumes  
playback.  
ꢅ ꢆ The Next Track and Previous Track buttons advance or retreat playback of your Song  
Queue (or Internet Radio menu) one song at a time.  
Press the Home Menu [ ] button at any point to return to the beginning menu.  
The Home Menu  
To begin navigating through your music, start on your “Home” menu, by pressing the Home  
Menu [ ] button. The display on SoundBridge should look something like this:  
Home Menu Overview  
Ë Playlists  
Browse  
Section 2: Browsing Music  
19  
Only the first two lines of the Home Menu are displayed at once (or one line if you are using an  
M1000 with the largest font size), but you can use the Down Ì arrow on your remote control to  
scroll through all these options:  
Playlists  
[Displays all the playlists available for the selected music  
library from your network.]  
Browse  
[Browse the music library by artist, album, song, genre, and composer]  
[Enter text for song title, album, artist, composer, and keyword.]  
[Select one of 18 different preset stations or playlists.]  
Search  
Play Preset  
6KRZꢀ6RQJꢀ4XHXHꢀ  
6KRZꢀ1RZꢀ3OD\LQJꢀꢀ >Shows song now playing. Press Select to get more info about the  
>Shows past and upcoming songs selected for playback]  
selection.]  
6HWWLQJVꢀꢀ  
>Set options for the music visualizer, iTunes playback, and  
memorizing radio playlists.]  
&KDQJHꢀ/LEUDU\ꢀꢀꢀ  
RUꢀ&RQÀJXUDWLRQꢀ  
>Exit the current music library and connect to another one, or  
change your network or system configuration.]  
The Ë arrow to the left of a menu item denotes the current item. You can also refer to the  
scroll bar (at the right of your display) to see your position in the list.  
Browsing Your Music by Album  
From the Home Menu, press the Down Ì button until you see the “Browse” option highlighted  
and press Select []. You will see a list of options:  
Ë Browse Artists  
Browse Albums  
If you scroll down, you will see these browsing options:  
ꢀ ꢀ %URZVHꢀ6RQJV  
Browse Genres  
Browse Composers  
Now, if you navigate to theBrowse Albumsoption and press Select [], you will see an  
alphabetical listing of Albums found in your music library.The screen will look something  
like this:  
Section 2: Browsing Music  
20  
Ë Parachutes  
Paul’s Boutique  
Navigate to the album that you want to hear using the Up/Down Â Ì arrow buttons — in our  
example,“Parachutes.Or, for faster browsing, press the right arrow to skip ahead in the album  
list to the next letter of the alphabet.When the album you want is selected, press the Select []  
button for a listing of songs found on this album.  
2
Ë C Don’t Panic  
C Shiver  
The music note C next to each song name indicates the selection is an individual track (and not  
a playlist, album or other collection of songs).  
Note: Songs purchased from the Apple Music Store will be displayed with a padlock ±icon.  
SoundBridge is not able to play back these “locked” files — they will simply be skipped during  
playback.  
Use the Up/Down Â Ì arrows again to highlight the song you want to play. Press the Play [ϐ]  
button (or press the Select button twice) to start that song playing. When the song begins  
playback, the display will switch to the “Now Playing” screen, which looks something like this:  
Don’t Panic 0:10/2:17  
Coldplay - Parachutes (2000) (|||------)  
Please note that the artist and album information may be abbreviated, or appear one line  
at a time, if the total number of characters exceeds what can be displayed at once. See the  
“Settings” chapter at the end of this manual for more information on display options.  
Hint: If you would like to go back to the above “Now Playing” screen at any time in order  
to see what’s playing, press Back [] several times until you see this screen. Alternatively,  
press Home Menu [ ], then scroll down to the “Show Now Playing” option and press  
Select []. This screen also appears by default after a few minutes of inactivity on the  
remote control.  
If you press Play [ϐ] on an album track, that track will play, followed by each track remaining on  
the album. For example, if you press Play on track #5 on an album containing 10 tracks, then  
Section 2: Browsing Music  
21  
tracks #5–#10 will play. (For continuous playback of the entire album, press Repeat [ ] on  
your remote control — the album will play until the end, then start again at the beginning.)  
You can also browse to an album, artist or genre selection and press Play [ϐ] to start playing  
the entire contents of the selected category.  
If you are not sure what you have selected to play, simply press the down Ì arrow from your  
“Now Playing” screen (the screen that displays the currently playing song). This is a shortcut to  
the Song Queue, which shows your upcoming songs (see upcoming section).  
Hint: If you navigate to a new song and press Play while your original selection is  
playing, you will overwrite the old selection (called the “Song Queue”) and begin playing  
your new selection. Therefore you should only press Play when you want to clear your  
previous music selections. Use the Add [+] button to add your new selection to the end  
of your Song Queue.  
Browsing by Artist or Composer  
Browsing by artist or composer works similarly to browsing by Album, as described above.  
After entering your desired artist or album, you will see a screen that lists the albums available  
by that artist:  
Ëꢀꢁ6KRZꢀDOOꢀPDWFKLQJꢀVRQJV!  
Medusa  
You can add all songs by this artist to your existing Song Queue by pressing Add [+] while the  
first menu item <Show all matching songs> is active. Or, press Play [ϐ] to play all songs by this  
artist and replace your existing Song Queue. (Songs will play in the order they appear on each  
album, with each album played in alphabetical order).  
Hint: Artist names starting with “the,” such as The Beatles, will be found under the first  
letter of the word following “the” — in this case, “B” for “Beatles”.  
Section 2: Browsing Music  
22  
You can choose specific albums or songs to play by navigating down to your desired album and  
pressing Add [+] to add to an existing Song Queue, or Play to replace an existing Song Queue.  
2
Hint: if your selected album contains songs by different artists, such as compilation  
albums or movie soundtracks, only the song(s) by your selected artist will be played.  
Browse by Album instead to play all the tracks.)  
Browsing by Song  
Browsing by song displays a list of all the songs in your music library, listed in alphabetical  
order. Use the Left/Right Ð Æꢀarrows to “fast browse” through the list, or up/down Â Ì to  
move through the list one item at a time.  
Browsing by Genre  
Browsing by genre displays an alphabetical listing of genres that describe the artists in your  
music library. To add all songs within a genre to your Song Queue, highlight that Genre and  
press Add.  
To browse within a genre, such as Hip Hop/Rap, press Select on your desired genre. You will see  
a list of artists in that genre, with the option to see a list of all albums in that genre. Or you can  
navigate to an artist and press Select to view albums of the selected genre by that artist.  
Hint: Information about your music, including Song Name, Artist, Album, and Genre is  
usually created automatically by the software you used to save your audio CD files on  
your computer’s hard drive (aka “ripping”). This process creates data called “ID3 tags”  
to describe each track. If this data is missing from your audio files, they will not appear  
when you browse by that data category. If you need to edit your ID3 tags, or if you are  
not satisfied with the description of genres (or other data) assigned to your music file, it  
is possible to edit that data in iTunes, Windows Media Player or other supported music  
jukebox programs. (In iTunes, select the file(s) to edit, click on File/Get info, then click on  
the Info tab.)  
Section 2: Browsing Music  
23  
SECTION 3: THE SONG QUEUE  
SoundBridge automatically builds a song queue every time you select a song or album to play.  
This section will tell you how to build a song queue, review a song queue and erase a song queue.  
Building a Song Queue  
Let’s say you would now like to choose several different songs or selections to play in a row.  
This is called building a “Song Queue.” SoundBridge automatically builds a new Song Queue  
every time you select a song or album to play. You can add to that list by navigating to your  
preferred music and pressing Add [+]. The selection will be added to the end of the current  
Song Queue.  
You may add a single song, an entire album, all songs by an artist, all songs in a genre, or any  
search result — just browse to the selection you prefer and press Add [+]. For example, if  
you would like to play all songs by Coldplay, select Home menu > Browse > Browse artists.  
Navigate to Coldplay in your artist list and press Add [+]. All songs on all albums by Coldplay  
will be played in the order they appear on each album. See “Browse” and “Search” for more  
information.  
You have several other options for building a Song Queue. After you press Select while  
browsing on a song, a “Song” menu appears with the following options:  
3OD\ꢀ6RQJVꢂꢀ6WDUWLQJꢀ:LWKꢀVHOHFWHGꢀVRQJꢀQDPHꢀꢃDQGꢀFOHDUꢀSUHYLRXVꢀ6RQJꢀ4XHXHꢄ  
*HWꢀ6RQJꢀ,QIR  
3OD\ꢀ6RQJꢀꢃDQGꢀFOHDUꢀSUHYLRXVꢀ6RQJꢀ4XHXHꢄ  
$GGꢀ6RQJꢀWRꢀ6RQJꢀ4XHXHꢀꢃVDPHꢀDVꢀSUHVVLQJꢀWKHꢀ$GGꢀ>ꢅ@ꢀEXWWRQꢄ  
The first, “Play Songs” option is described in the section above — it starts playing your album  
(or other browsed list), beginning with the current track.  
If you choose “Play Song” on any track in your selection, the entire list is added to the Song  
Queue, but playback starts on the chosen track. If you have the Repeat [ ] option selected,  
the earlier tracks in the queue will play after the last song. If you have the Shuffle [ ] option  
selected, then the chosen track will play first, followed by all the other tracks in the list in  
random order.  
The “Add song to Song Queue” option behaves similarly to the Add [+] button— it places the  
current song at the end of your playlist.  
Section 3: The Song Queue  
24  
You can add an almost unlimited number of songs to your Song Queue. Each selection will be  
played in the order it was entered (unless you have chosen to Shuffle your Song Queue).  
Hint: After you have selected multiple songs to be played in turn, you can use the “Next  
Track” and “Previous Track” buttons to skip from song to song in your Song Queue.  
3
Reviewing a Song Queue  
At any point, you can review what’s in your Song Queue by pressing the Down Ì arrow from  
the Now Playing screen, which is the default screen that appears while SoundBridge is playing.  
The Now Playing screen looks something like this:  
Don’t Panic  
Coldplay  
0:10/2:17 ꢃ  
Parachutes (2000) (|||------)  
Alternatively, you can press Home Menu [ ], then select the “Show Song Queue” option. You  
will see the entire list of songs in your song queue; refer to the scroll bar on the right side of the  
screen to determine where in the list you are located. Press the Up/Down arrows Â Ì to see  
the entire list of selections in your Song Queue. The currently playing selection is indicated by a  
speaker ;)).  
You cannot save a Song Queue that you have created — it’s only held in memory temporarily  
until you build your next Song Queue. If you would like to build a Song Queue that you can  
save, please build a Playlist in your music jukebox software (see “Playing a Saved Playlist”  
below).  
When the Song Queue has played all the way through, it will stop (unless repeat has been  
selected). You will see the Stop icon on the right side of your display. To start playing your  
Song Queue again at the beginning, press the Play button.  
Erasing a Song Queue  
If you decide you don’t want to play the Song Queue you’ve just created, simply select  
something else to play. Navigate to another selection (song, playlist, etc.) and press Select []  
or Play [ϐ] (not Add [+]). This selection immediately replaces your old Song Queue.  
Section 3: The Song Queue  
25  
SECTION 4: ADDITIONAL PLAYBACK OPTIONS  
Playing a Playlist  
To play a playlist that you have created in your music jukebox software such as iTunes or  
Windows Media Player, select the Playlist option from the Home Menu [ ]. Use your Up/  
Down Â Ì arrows to browse your playlists one by one, find the one you want to play, then  
press Play [ϐ] to play all songs on the playlist immediately or Add [+] to add the playlist to  
your Song Queue. Playlists can include audio tracks, Internet radio streams, even iTunes’  
Smart Playlists. If your playlist was created in Windows Media Player or other software using  
Windows Media Connect, be sure to save your playlist in the My Music/. My Playlist folder on  
your hard drive, or configure Windows Media Connect to share the directory on your hard drive  
containing the playlist.  
Repeat and Shuffle  
Pressing Repeat [ ] once makes your Song Queue play continuously. You will see the Repeat  
icon T displayed on the right side of your “Now Playing” screen below the Play ϐ icon. Pressing  
Repeat again makes the current song play over and over; you will see another Repeat icon,  
a circle with just one arrow  
command altogether.  
. Press Repeat a third time and you will remove the repeat  
Pressing Shuffle [ ] while playing a Song Queue will give you the following options:  
Shuffle On — will play everything in your Song Queue in random order. (The shuffled order  
of songs will be displayed in the Song Queue.) An icon with two crossing arrows  
displayed on your Now Playing screen.  
will be  
Shuffle Off — will play everything in your Song Queue in the original order.  
You can execute the Repeat and Shuffle command from any menu in SoundBridge. Even  
though you can only see the mode change on the Now Playing screen, the command is  
taking effect.  
Section 4: Additional Playback Options  
26  
Search Options  
To search for a specific selection by spelling it out, you can press the Search [ѣ] button on your  
remote control, or navigate down to the “Search” option from the Home Menu.  
(Note: Unfortunately, Rhapsody and MusicMatch don’t support searching on SoundBridge at  
this time. If searching is not available, the Search menu item will not appear, and pressing the  
Search key on the remote will display a message.)  
Whether you use the Search menu or the remote button, you will see the following options:  
4
Search for Titles  
Search for Albums  
Search for Artists  
Search for Composers  
Search Keywords  
Press Select on the option you would like to search with. Then, use your Left/Right Ð Æꢀarrows  
on the remote control to enter characters for spelling your selection and then pressing Select.  
When you are done spelling, use the Down Ì button to go to the OK option and press Select. (If  
you make a mistake, use the Down Ì button to go to the Delete option and press Select.)  
Hint: Partial spelling is OK — the Search function searches for letters anywhere in the  
word, as opposed to just at the beginning. For example, to search for Radiohead, you  
can enter any combination of letters found in the word (“RA,” “DI,” “HE,” etc.), and the  
results will return all Artists containing those letters (e.g., if you enter “DI” you may get  
Radiohead, India Arie, and Diana Krall).  
When you find the music you like, use the Add [+] button to add it to your Song Queue. If  
searching for albums or artists, you can press Select to navigate down to individual tracks.  
Section 4: Additional Playback Options  
27  
SECTION 5: PRESETS  
Your SoundBridge includes 18 positions in its internal memory, which can store a variety of  
selections for your quick and easy recall. You can save just about anything to Presets that you  
can play on the SoundBridge by highlighting it and pressing the Play key. For example, you can  
save all tracks by a single artist, a Playlist, an Internet Radio Station, or a set of search results.  
Simply navigate to your selection and press the Play button to begin playing it. Then press  
Select [] and scroll down to the option “Save Preset: [Name of selection]”. Each position is  
numbered: A1-A6, B1-B6, and C1-C6. Choose which preset you would like to replace, and your  
preset will be saved.  
For example, let’s say you want to save all tracks by the artist Coldplay as one preset. Select the  
Browse/Browse Artists options and scroll down to the listing “Coldplay”. Press Play [ϐ], and  
then press Select. Scroll down to the option “Save Preset: Tracks by Coldplay” and press Select.  
Note: You cannot make a preset out of a Song Queue that was created using the Add key or  
menu command. The selection must be playable simply by hitting the Play key on the remote.  
Individual tracks cannot be saved as Presets. When an Internet Radio station is playing, even if it  
was part of a larger list, only the individual station is saved.  
Recalling Presets  
You can access your Presets in several ways:  
From the Home Menu of any music library, scroll down to “Play Preset” and press Select. Scroll  
down to the preset you would like to play and press Select [].  
While listening to any selection (music, Internet radio, etc.) press Select from the Now Playing  
menu and scroll down to the “Play Preset…” option.  
Editing Presets Using the Web Interface  
You can also edit your presets in the SoundBridge web interface. See page 35 for instructions  
on connecting to your web interface. Click on the link to the “Presets” page. Here, you can:  
- Re-name a Preset by typing a new name into the web form.  
- Reorder the selections in the list by pressing and dragging the “Move” button.  
Section 5: Presets  
28  
- Play back the selection by pressing the “Play” button next to the selection. (If your  
SoundBridge is in Standby mode when you press Play, it will power up and start playing.)  
- Enter a stream URL for an Internet radio station from an external source. (For help with  
locating and importing stream URL’s, see the link on the top of the web page. For more  
information about playing Internet radio streams, see the “Internet Radio” section of this  
user guide.)  
When you are finished editing your Presets, click on the “Update Presets” button at the bottom  
of the page.  
Presets commands can also be programmed into a universal remote control. For more  
information, see the “Programming a Universal Remote Control” section in the Advanced  
Features chapter of this document.  
5
Section 5: Presets  
29  
SECTION 6: INTERNET RADIO  
You can listen to Internet radio in one of three ways. First, you can listen to SoundBridge’s built-  
in set of radio stations located in the “Internet Radio” Library. Your computer does not need to  
be on - all you need is an active Internet connection on your home network. Second, you can  
enter a URL of a radio station playlist on the Internet Radio tab of the SoundBridge web page.  
(This feature is described more in the “Web Page Control” chapter of this user guide.) Be sure  
to try using Roku Radio Snooper to easily find the urls, test the streams, and set new Internet  
radio stations as presets. Third, you can use iTunes to tune in to other stations, and then play  
them back on SoundBridge. (Note: You can use iTunes for radio tuning even if you normally use  
Windows Media Connect as your music server.)  
The easiest way to play Internet Radio on SoundBridge is through the “Internet Radio” Library,  
where you can access a large and growing number of Internet Radio stations, browseable by  
Name, Genre, Language, and Location. To navigate to the “Internet Radio” Library, follow these  
steps:  
1. Press Home Menu [ ]. Navigate down to ”Change Library or Configuration” and press  
Select [].  
2. Your available music libraries will be displayed, including the one named “Internet Radio.”  
Select that library and you will see a list of Internet radio stations. These are your Presets,  
and they are pre-loaded when your SoundBridge is first set up. See below for more  
information on how to edit these Presets.  
3. Scroll to the station you want to play and press Play [ϐ]. (Alternatively, you can press Select  
[] and choose “Get Station Info” to view the genre/format of the station, its language and  
location.)  
When the station is playing, the “Now Playing” screen looks similar to this,:  
Michelle Shocked — Black Widow  
RadioParadise.com  
The song and artist information is provided by each Internet radio station. Therefore, it may not  
be available for every Internet radio station, or it may look slightly different.  
Section 6: Internet Radio  
30  
Browsing Internet Radio Stations  
You can browse SoundBridge’s built-in stations by Name, Genre, Language or Location. From  
anywhere in the Internet Radio Library, press Home Menu [ ]. You will see the following  
options:  
My Favorites  
Browse  
Play Preset  
6KRZꢀ1RZꢀ3OD\LQJ  
Select “Browse” and choose the method of browsing that you prefer:  
Browse Names  
Browse Genres  
Browse Locations (by country of origin)  
%URZVHꢀ/DQJXDJHV  
Hint: You can “Fast Browse” a list of results by pressing the Left/Right Ð Æꢀarrows on your  
remote; your results will skip to the next letter of the alphabet.  
6
Choose your desired browse option and press Select. Scroll down to the station you would like  
to hear and press Play (or Select twice) to begin playback.  
Find Station URLs Using Roku Radio Snooper  
Roku Radio Snooper is a free Windows application that enables you to quickly and easily  
discover the URL for your favorite Internet radio stations and determine if the station is  
supported by SoundBridge and then make it one of your 18 SoundBridge presets with the  
launched, the lightweight application runs in the background. And while you are listening to  
any Internet radio stream on your PC, Snooper will test the stream, determine compatibility in  
an instant, and then present you with the option to set a compatible station as a preset with  
one button click. Snooper requires version 2.5 or later software running on your SoundBridge.  
Playing Internet Radio from iTunes  
If you want to listen to a station that is not among SoundBridge’s built-in list of stations, you  
Section 6: Internet Radio  
31  
can use iTunes to “tune in” to that station, and then listen to it on SoundBridge. (Windows  
Media Connect users can continue to use WMC for your music library, and just use iTunes for  
this feature.)  
To play Internet radio stations with the iTunes music server on SoundBridge:  
1. In iTunes, create a new playlist (for example, let’s call it “RadioFavorites”).  
2. Find the stations that you would like to play on SoundBridge; browse the iTunes Internet  
radio station list by clicking on the Radio button on the Source tray of iTunes, or import a  
specific URL from its online source.  
3. Drag and drop the stations you like into the “RadioFavorites” playlist.  
The result is an iTunes playlist that contains your favorite radio stations.  
Section 6: Internet Radio  
32  
4. Play this playlist on SoundBridge. Connect to your iTunes Music Library by choosing the  
“Change Library or Configuration” option from your Home Menu and select the name of  
your library. Once connected, select “Playlists.” Scroll down to the saved playlist (in our  
example, “RadioFavorites”) and select it. You can now scroll through your favorite radio  
stations. Press Play [ϐ] to start playing your desired station.  
Customizing Favorites and Presets for Internet Radio  
There are two ways to save Internet radio stations for easy playback. The first way has already  
been discussed, and that is to save the station as a Preset. Whether the station was found by  
browsing SoundBridge’s built-in Internet Radio Library, by playing it from iTunes, or by entering  
it manually on the web page, it can be stored in a Preset slot and played back easily via the  
“Play Preset” command.  
6
The second way is to mark a station from the built-in Internet Radio Library as a favorite. When  
Section 6: Internet Radio  
33  
a station is marked as a favorite, it appears in the “My Favorites” list in the Internet Radio library,  
but does not use up one of the 18 Preset slots.  
Note: If a station is saved as a Preset, then it is assumed to also be a “favorite”, and will always  
appear at the front of the “My Favorites” list.  
There are several important differences between Presets and My Favorites:  
Ë
Presets are accessible from any Library, while My Favorites only appear in the Internet  
Radio Library.  
Ë
My Favorites may only contain stations found by browsing the Internet Radio Library.  
Presets may contain stations from the built-in library, or saved from iTunes, or entered  
via the web page.  
Ë
Presets can recall content other than Internet Radio stations, like playlists or  
selections that you have browsed to from SoundBridge (such as all songs by a  
particular artist, etc). My Favorites include only Internet radio stations.  
Ë
Ë
Ë
When displaying My Favorites, Internet radio station Presets are also included at the  
beginning of the list.  
Presets can be programmed and played from the preset web page (see page 25 for  
more information.)  
Presets can be programmed as discrete commands on a custom remote control. (For  
more information about customizing your remote for SoundBridge control and a  
pronto CCF file, please visit the Support section of our web site.)  
To save an Internet radio station to My Favorites:  
1. From the “Internet Radio” library, Scroll down to the “Browse” menu item. Navigate to the  
station you would like to save.  
2. Press Select [], then press the Down Ì arrow to display these options:  
Play [Station name]  
Get Station Info  
Section 6: Internet Radio  
34  
Add Station to My Favorites  
3. Scroll down to the option “Add Station to My Favorites” and press Select. You will see the  
message “Station added to your favorites”. Next time you view My Favorites, you will see  
that station displayed in the list.  
You can also save a station to My Favorites while it is playing. Simply press Select to display  
these options:  
Get info for “[Station name]”  
Play Preset…  
Save Preset: [Station name]  
Add Station to My Favorites  
Stop  
Select the option “Add Station to My Favorites” and press Select.  
Note: Only stations that you have accessed via the browse feature in the Internet Radio Library  
can be saved to your Favorites. Stations that are played from an iTunes playlist or from a URL  
manually entered as a preset cannot be saved to your Favorites.  
6
To save an Internet radio station to your Presets:  
Play a radio station and press Select. You will see the following list of options:  
Get info for “[Station name]”  
Play Preset… (this displays a list of your 18 presets)  
Save Preset: [Station name]  
Add Station to My Favorites  
Stop  
Select the option “Save Preset: [Station name]” and press Select. Scroll down to the position  
you want to replace and press Select. Next time you view Presets, you will see that station  
displayed in the position you have chosen. You will also see Presets displayed first in the list of  
My Favorites.  
Saving Stations Originating in iTunes to Presets  
You can save Internet radio stations from an iTunes playlist to your SoundBridge Favorites by  
pressing Select [] while the station is playing in SoundBridge. You will see the following  
options:  
Section 6: Internet Radio  
35  
Get info for [Station name]  
Play Preset…  
Save Preset: [Station name]  
Add Station to My Favorites  
Stop  
Turn Screen Off  
Scroll down to “Save Preset” and press Select []. You will see a numbered list of existing  
presets starting with A1, A2, etc. Select the preset you would like to replace and press Select  
[], You will see the confirmation message “Preset Saved”.  
Hint: You cannot save stations imported from iTunes or Windows Media Connect as  
Favorites, only Presets. (However, stations saved as Presets will always be displayed at the  
front of the list of “My Favorites”.)  
Memorizing a Radio Playlist  
You can also replace some or all of your existing presets with the contents of an Internet radio  
playlist in iTunes.  
1. If you are still in the “Internet Radio” music library, exit it and enter your iTunes library. (See  
page 16 for changing music libraries.)  
2. Create a playlist in iTunes containing your favorite radio stations, as described previously in  
this chapter.  
Hint: Your playlist can contain as many Internet radio stations as you like, but only the  
first eighteen will be saved to your Presets. You can rearrange them by dragging and  
dropping to their desired order inside the iTunes playlist, or (after saving them) on the  
SoundBridge web page (see the “SoundBridge Web Interface” chapter of this document  
for more information).  
3. On the Home Menu of your iTunes music library, select “Settings”, then “Memorize  
Radio Playlist”.  
4. Follow the instructions to navigate to the playlist you want to save, and press OK.  
5. You will receive a confirmation of what Internet radio streams were saved (up to the first 30  
characters of the name will be saved). You can press Back [ϱ], or navigate to your desired  
Section 6: Internet Radio  
36  
audio stream and press Select [] to play it immediately.  
If your list contains fewer than eighteen stations, SoundBridge will replace the Presets in the  
corresponding slots (starting with A1), and the remaining Presets will remain unchanged.  
Playing Stations Saved as “My Favorites” or “Presets”  
From anywhere in the Internet Radio Library, press the Home Menu [ ]. Choose the “My  
Favorites” option. You will see a list of your Internet radio Presets followed by your Favorites.  
Navigate to the station you would like to play and press Select []. You will have the option to  
play it, get station info, or “Remove station from My Favorites”.  
You can also just press the Down Ì arrow on the Now Playing screen of an Internet radio  
station. Since there is no Song Queue when listening to Internet radio, this shortcut takes  
you directly to My Favorites. If the currently-playing station appears in My Favorites, it will be  
marked with the speaker icon [;].  
To play your Presets, you can also choose the Play Preset option from the Home Menu of any  
music library (not just the Internet Radio Library). Choose the station you would like to play,  
then press Select,  
6
Playback Limitations of Internet Radio Streams  
SoundBridge currently supports MP3 and WMA Internet radio stations. RealAudio and AACplus  
stations are not supported at this time. However, stay tuned for additional formats that may be  
supported in future software releases.  
Unfortunately, there are few standards in Internet radio (especially for MP3 stations), and  
sometimes a station will do something out of the ordinary that will prevent the SoundBridge  
internetradio.php for more information.  
Discovering More Internet Radio Stations  
Our online user forums have an active discussion dedicated to helping SoundBridge users find  
good Internet Radio stations in a variety of genres. Visit our Forums (accessible from www.  
rokulabs.com/support) and look for the discussion topics related to Internet Radio stations if  
you would like to find more stations in a particular genre or would like to suggest a station or  
offer help to others on this topic.  
Section 6: Internet Radio  
37  
SECTION 7: SOUNDBRIDGE WEB INTERFACE  
Use SoundBridge’s web page to control SoundBridge playback remotely, configure your  
SoundBridge or reconfigure your preset Internet radio stations by entering the stream URL  
directly into the web page. There are several ways to access the web page:  
Launching the Roku Web Interface  
PC/Windows users:  
You can configure your computer to display UPnP devices including SoundBridge in your My  
Network Places window.  
Windows XP Service Pack 2 (SP2) users:  
1. Open My Network Places  
2. Click on “Show icons for networked UPnP devices” in the Common Task panel on the left  
side of the My Network Places window. If the Common Task panel is not visible  
a. Select Tools>Folder Options in the My Network Places window  
b. Under the Tasks section, choose “Show Common Tasks in Folders” and click OK.  
3. Choose OK when asked to open the UPnP firewall ports.  
Windows XP Service Pack 1 (SP1) users:  
From the Control Panel, click Add or Remove Program.  
1. Click Add/Remove Windows Components.  
2. From the Windows Component list, select Network Services and then click Details.  
3. Select the UPnP Interface check box.  
4. Click OK and then Next.. The Configuring Window appears.  
5. When the configuration is completed, click Finish.  
6. Navigate to My Network Places and double-click the SoundBridge icon. You are now ready  
to access SoundBridge’s web interface.  
Section 7: SoundBridge Web Interface  
38  
Apple/OSX users:  
Follow these steps to access the web page:  
1. Launch the Safari web browser. Because SoundBridge uses the Bonjour protocol (formerly  
known as Rendezvous), the device automatically announces itself.  
2. In Safari, be sure you have your bookmark list showing. If it is not showing, go to the  
Bookmark menu and select Show All Bookmarks.  
3. Click on the Bonjour option in the bookmark list to reveal your SoundBridge. If more than  
one device is connected, they will be named SoundBridge, SoundBridge (2), and so on.  
4. Double-click the name of your device to open the SoundBridge web page.  
The web page includes four tabs:  
Now Playing  
Allows for control of playback of current music selection, including Pause, Play, Next/Previous  
Track, Stop, Repeat and Shuffle. You can also change the volume level.  
Presets  
On this page, you can:  
7
- Specify up to eighteen of your favorite music selections, such as Internet radio streams,  
search results, or Playlists, to be stored in your Presets. (See p 26 for more info about  
Presets.)  
- Change the name of a preset.  
- Click and drag the “Move” button to change the order of items in your Preset list.  
- Press the “Play” button to play a preset item on your SoundBridge.  
Why eighteen presets? Roku’s new Wi-Fi Radio includes eighteen preset buttons on the top of  
the unit– which makes playing and changing presets quick and easy.  
If you experience problems with playback of an Internet radio stream you copied from a web  
browser, make sure that copied the correct URL. Usually, an MP3 stream URL ends with the  
Section 7: SoundBridge Web Interface  
39  
“.pls,” or “.m3u” extension, and a WMA stream ends with “.asx”. Currently, SoundBridge can  
stream MP3 and WMA formats. RealAudio streams (ending in .ram or .rm) are currently not  
supported. AACplus stations may use the same extensions as MP3 stations, but will not be able  
to be played. Usually, an Internet Radio station’s web site will say which format is being used.  
Stay tuned for additional format support in future software updates.  
You may wish to use fewer than the 18 available Preset slots. If you want to leave a slot empty,  
ensure that the menu below the “Name” label reads “URL”, and then ensure that both the name  
and location boxes are empty. When you save changes, the Preset will be marked as empty.  
When you are finished editing your presets, click on the “Update Presets” button at the bottom  
of the page.  
Hint: If for some reason you insert a URL that is too long to fit inside the text field  
(longer than 250 characters), SoundBridge will automatically revert to the previous  
URL that was in your list before.  
Please see the “Internet Radio” section for information about accessing and playing your stored  
stations from your presets.  
Section 7: SoundBridge Web Interface  
40  
Configuration  
Use this page to enter a unique name for your SoundBridge unit, choose a language other  
than English, or set options for displaying the time and date on your SoundBridge when it is in  
Standby mode. See the “Clock Settings” and “Language Setup” sections of the Advanced  
Features chapter at the end of this manual for more information.  
7
Status  
Use this page to view the version of software currently running on your SoundBridge. You can  
also review your network connection information, including IP address and MAC addresses.  
If you are using a Wi-Fi connection, this page will display your Wi-Fi signal strength and the  
name of the network to which you are connected. When you are finished using your web page,  
simply close your browser window.  
Section 7: SoundBridge Web Interface  
41  
SECTION 8: WHEN YOU ARE FINISHED USING SOUNDBRIDGE  
When you are finished playing music and using your SoundBridge altogether, just press the  
Standby [Ѷ] button on your remote. In Standby mode, SoundBridge can display the date and  
time or a blank display, depending on your preference. (See page 40 for more information  
about setting these preferences.)  
If you were playing Internet radio when you pressed Standby, then pressing Standby again will  
resume playback of that station. Otherwise it will return you to the music library to which you  
were most recently connected.  
If you plan to disconnect SoundBridge from AC power after you are done using it, be sure to  
press the Standby button first. This logs you out of the music server software running on your  
computer.  
Note: Wait approximately 10 seconds after pressing Standby [Ѷ] before unplugging  
SoundBridge; this gives SoundBridge time to flush its settings for a clean reboot.  
Hint: If you unplug the SoundBridge from AC power five times without pressing  
Standby [Ѷ] on your remote first, iTunes may lock you out of connecting to the server.  
That’s because iTunes allows a maximum of five users to connect at one time, and if  
you don’t put SoundBridge into standby mode first, iTunes may believe you are still  
connected. To restore your access to the iTunes server, close iTunes and then restart it.  
You should then have no trouble connecting to the iTunes server as before.  
Section 8: When You Are Finished Using Soundbridge  
42  
SECTION 9: ADVANCED FEATURES  
Brightness, Contrast, Font, and Text Display  
The Bright [н] button on your remote lets you change the brightness of your display using the  
Left/Right arrows Ð Æ. For SoundBridge M1000, text size and font options can be controlled  
using the Up/Down arrows  Ì. (M1000 can display one line or two lines at once.)  
Brightness & Time Format While in Standby  
While your SoundBridge is in Standby mode (when the unit displays the time and is not playing  
music), you can adjust the brightness and format of the time on the display.  
• Use the Right/Left [Ð Æ] to adjust the brightness of your display. Pressing Left [Ð ] dims the  
clock display; pressing Right [Æ] brightens it. These settings do not affect the brightness  
settings of the display when playing Internet or network music libraries.  
• Use Up/Down [ Â Ì ] arrows to change the time format. You can display large or small  
fonts, display the time but not the date, and display the time and date. These settings do  
not apply to when you are listening to the radio or your music libraries.  
Settings  
SoundBridge display and playback settings can be changed in the “Settings” option located  
at the bottom of the Home Menu. Your Settings screen will show the following options (scroll  
down using your remote control to see the complete list):  
ꢀ ꢀ 9LVXDOL]HUꢀ6HWWLQJVꢁꢁꢁꢁ  
8
9
Dꢀ 5HWXUQꢀWRꢀ1RZꢀ3OD\LQJꢀZKHQꢀLGOH  
Dꢀ 6FUROOꢀORQJꢀLQIRꢀLQꢀ1RZꢀ3OD\LQJ  
D Display composer for classical works  
Skip items un-checked in iTunes  
Memorize Radio Playlist…  
For more information about memorizing a radio playlist, refer to page 34 in the Internet Radio  
section of this manual.  
Music Visualizer Settings  
You can customize the kind of visualizer to display, whether it appears full-screen or on the right  
Section 9: Advanced Features  
43  
side of the Now Playing screen, and other options. Use the “Visualizer Settings” command on the  
Settings screen to explore these options. (See appendix for full listing of visualizer options.)  
Clock Settings  
When in Standby mode, SoundBridge can display the date and time, similar to the screen  
below.  
1:17:49 PM  
0RQGD\ꢂꢀ$SULOꢀꢆꢇꢂꢀꢈꢉꢉꢊ  
You can customize the clock display in a number of ways:  
1. When in Standby mode, use the Left/Right Ð Æꢀarrows to adjust the brightness of the clock  
display. (This will not affect the brightness settings of the display when in regular playback  
mode.) Turn the brightness all the way down until you see the word “Standby” to have the  
screen go completely blank when in Standby. If the screen is blank, pressing the Select []  
key will momentarily display the time and date.  
2. When in Standby mode, use the up/down Â Ì arrows to cycle through modes of display.  
For example, you can display large and small fonts, display the time but not the date, etc.  
(Again, these settings will not be applied to your display when you resume SoundBridge’s  
regular playback mode.)  
3. Use the SoundBridge web page to configure the format of the date and time. You can also  
turn off the clock display altogether. Please see the “SoundBridge Web Interface” chapter of  
this user guide for instructions on launching your SoundBridge web page.  
After your web page is launched, click on the Configuration tab. Scroll down on the page until  
you see a screen that looks similar to the one on page 43.  
Here, you can customize how your time appears and correct errors in the display of your date  
and time. First, be sure that your time zone is selected correctly. SoundBridge uses an Internet  
connection to display the proper time for your time zone. If your Internet connection is not  
available, SoundBridge will be unable to display the date and time in Standby mode.  
Section 9: Advanced Features  
44  
Note that the default configuration of the date and time fields depends upon the language you  
have selected for your SoundBridge display, but may be edited to suit your needs.  
Format your time display by choosing what to display in each of four fields. SoundBridge  
“strings together” all the fields to create the time display. For example, if you don’t want to  
see seconds, or don’t want to see “AM/PM”, select the hour and minute format, then choose  
the “Leave Blank” in the remaining drop down menus. Take note of the small text-entry boxes  
to the right of the pop-up menus. This is where you enter the character that should appear  
between the sections of the time. For example, enter a colon (“:”) for the usual “12:15” format.  
9
Section 9: Advanced Features  
45  
The date selection works the same way — you can choose the format that best fits your  
geographic standard or your personal preference.  
To disable the date/time display altogether when SoundBridge is in standby, select the  
corresponding option on this page.  
Don’t forget to click the “Update” button for the date or time configuration once you’ve  
changed it. Since the update buttons correspond separately to date, time, time zone, etc, you  
should only update one section at a time, then press the appropriate update button.  
When you are finished, simply close your web page.  
Language Setup  
SoundBridge will prompt you for your desired language the first time you set up the unit. If you  
would like to change the language after the initial setup, use the SoundBridge web page. Please  
see section 7 of this user guide for instructions on launching your SoundBridge web page. Then,  
choose the “Configuration” tab. You can choose your language in one of two ways:  
1. From the drop down menu titled “Select Language”, choose from the options available.  
(Currently, SoundBridge ships with the following language options: English, French, German,  
Spanish, Swedish, Japanese, Traditional Chinese and Simplified Chinese. Click the “Change”  
button to switch to the chosen language.  
2. If your language is not listed in the above options, you can upload a Language Resource File  
containing the instructions to display another language. To see if a third-party translation  
international. To download and edit or “translate” this file for your language, click on the  
“View Current Language Resource File” link. To upload a resource file that you or another  
third party has created, use the Browse button on the web page to locate the file on your  
computer’s hard drive, then click “Update” to load it into SoundBridge.  
Hint: You can always revert to SoundBridge’s built-in default languages by clicking the  
Revert button on the bottom of the Language settings area.  
When you are finished editing your language settings, simply close your web page.  
Section 9: Advanced Features  
46  
Standby and Reboot Options  
On the SoundBridge “Configuration” Web page, under “Options”, you can specify how  
SoundBridge behaves while in Standby mode and after powering up. Standby options include:  
Display clock, Screen off. Reboot options include: Return to last state, Enter Standby, Reconnect  
to last source, and Show Server List. (These options are useful if, for example, your SoundBridge  
is connected to a power strip with other equipment, and you would like it to remain in standby  
even after the power returns to the unit.)  
WMA Lossless Transcoding  
This is an option that only needs adjusting if you are having trouble with WMA Lossless  
playback. Reducing the Bitrate will help SoundBridge tell the difference between WMA and  
WMA Lossless based on the Bitrate of the stream. (For more information about this feature,  
please visit Roku’s user forum at rokulabs.com/support.)  
FLAC and Ogg-Vorbis Transcoding  
You can use the Firefly media server to transcode your audio files from FLAC or Ogg-Vorbis to  
be playable on SoundBridge. For more information about the Firefly media server, please see  
the Music Server section of the Getting Started chapter of this manual.  
Programming a Universal Remote Control  
Roku has made available for download a “CCF file” with all of the remote control codes  
supported by the SoundBridge and SoundBridge Radio. A CCF file is a remote control  
configuration file compatible with Pronto programmable universal remotes made by Philips  
and other brands. Some other programmable universal remotes can also use or import CCF  
files. Please consult the instructions for your particular remote control to see if you can use a  
CCF file.  
9
The SoundBridge CCF file includes all of the functions available on the standard SoundBridge  
remote, as well as some additional special-purpose and direct-access commands that may be  
of interest to some users. These functions include: discrete power on/off; stop; Preset keys for  
all 18 Presets; keys for all the Browse options; and, keys to directly access Internet radio, AM/FM  
radio (SoundBridge Radio only), and the last-used music server library.  
Section 9: Advanced Features  
47  
SECTION 10: OPTIONS FOR SYSTEM CONFIGURATION  
If you need to change your network settings or other system-level options, go to any Home  
Menu and select “Change Library or Configuration”. Choose “System Configuration” at the  
bottom of the next screen. You will see the following options:  
Software Version & Updates: This option shows you which software version you have on  
SoundBridge and allows you to check if a newer version is available for download. SoundBridge  
will notify you automatically when a new software update is available after coming out of  
Standby mode or after accessing your “source” menu. Use this option to check for new software  
manually.  
Select Wi-Fi SSID & Password: This option allows you to check the name of the wireless  
network to which you are connected and select another one. Use this option to enter your  
network security key. See Appendix section “Wi-Fi Setup” for more information.  
Show Wired Ethernet Status: This option displays your connectivity status, IP address and  
MAC address, among others.  
Show Wi-Fi Status: Displays Wi-Fi signal strength.  
Network Control: Enables or disables control of SoundBridge by a remote UPnP device.  
Reset to Factory Defaults: Reset to original factory settings. Important: This will erase all  
Presets, Internet Radio favorites, network settings, and any other customizations made via the  
Settings menu or web page.  
Restart SoundBridge: Power cycles SoundBridge and reboots the system.  
Safe Mode  
Safe Mode runs automatically in the unlikely event that Soundbridge software becomes  
corrupted. While in Safe Mode you can download a new version of software from Roku or  
restore factory settings. When Soundbridge enters Safe Mode, you will see the text “Safe  
Mode” displayed superimposed over the Roku logo during the startup animation.  
Section 10: Options For System Configuration  
48  
Safe Mode can also be entered manually by powering Soundbridge off by unplugging it from  
power, then plugging it in again while pressing and holding any button on the remote control  
during boot-up.  
While in Safe Mode, your stored settings will not be recalled. Therefore, you will be prompted  
to enter your language and Wi-Fi region again. If you need to update the software on your  
SoundBridge, you will also need to select a network and enter the WEP key (if needed) or use  
SD card mode.  
In Safe Mode, SoundBridge goes directly into the System Configuration menu, with options  
limited to checking for software update and resetting factory defaults. The Roku logo is  
displayed next to the menu with “Safe Mode” superimposed on it, like the startup animation.  
Roku Control Protocol (RCP)  
SoundBridge supports a sophisticated control protocol called the Roku Control Protocol (RCP).  
Look for third party applications that run on your PC, Mac, or PDA that allow remote Wi-Fi  
control of your SoundBridge using RCP. If you are a developer, see the Community tab on our  
web site for more information. There, you can find links to third-party software and discussion  
of controlling SoundBridge in our user Forums (look for the Control Forum.) A link to the  
forums can be found in the support tab on our web site.  
Geeks — Read This  
The SoundBridge has a command line interface that you can “telnet” to for piddling about.  
You will need to telnet to port 4444. You can quickly get to a Telnet prompt by going to the  
built-in web page’s “Status” tab and clicking on the SoundBridge’s IP address. Type “?” at the  
command prompt to see a list of commands. See the developer section of our web site for  
more details, including the RCP remote control protocol.  
SoundBridge has a built-in UPnP AV “media renderer.” This protocol can be used to control the  
SoundBridge from your own software. Please watch the developer section of our web site for  
updates on this feature.  
10  
Section 10: Options For System Configuration  
49  
SECTION 11: APPENDIX 1A: MENUS OVERVIEW  
Home - Music Library  
Playlists (ÅAlpha list of Playlists available in current music library)  
Browse (ÅArtists/Albums/Songs/Genres/Composers)  
Search (ÅText entry for keyword search)  
Play Preset (ÅList of Presets numbered A1:C6 ÅSelect ÅPlays station)  
Show Song Queue (ÅList of songs in queue)  
Show Now Playing (ÅNow playing screen)  
Settings (Å[see menu below])  
Change Library or Configuration  
Home - Internet Radio Library  
My Favorites (ÅPreset stations, then favorite Internet radio stations ÅSelect ÅPlay station/Get  
station info/Remove from My Favorites)  
Browse (browse Internet radio stations -by Name/Genre/Location/Language)  
Play Preset (ÅList of Presets numbered A1:C6 ÅSelect ÅPlays station)  
Show Now Playing (ÅNow playing screen)  
Settings (Å[see menu below])  
Change Library or Configuration (Å [see menu below])  
Change Library or Configuration  
Music Library 1  
Music Library 2  
Play Internet Radio (ÅList of Presets and Favorites ÅSelect ÅPlay station/Get station info/  
Remove station from My Favorites)  
Change Library or Configuration (Å [see menu below])  
System Configuration  
Software Version and Updates  
Select Wi-Fi SSID & Password  
Show Wired Ethernet Status  
Show Wi-Fi Status  
Section 11: Appendices  
50  
Network Control (ÅSet preference to Enable/Disable network control via UPnP)  
Reset to Factory Defaults  
Restart SoundBridge  
Exit  
System Configuration> Show Wi-Fi Status  
Connected to [Network name]  
Quality: xx Signal: xxdBm  
Technical Details:  
Connected to an open-system access point…  
MAC Address:  
IP Address:  
Netmask:  
Gateway:  
DNS 1:  
DNS 2:  
Home> Settings  
Visualizer Settings…  
Return to Now Playing When Idle  
Scroll Long info in Now Playing  
Display Composer for Classical Works  
Skip Items Un-checked in iTunes  
Memorize Radio Playlist… (Å”Select a playlist to save the first 18 Internet radio stations in that  
playlist as your Presets.” Note-only works if connected to music library in which the playlist is  
contained..”)  
Home> Settings> Visualizer Settings  
Select Visualizer… (ÅClock/Frequency Analyzer/Horizontal VU-Meter/Oscilloscope/Vertical  
VU-Meter/Voice Print)  
No Visualization  
Partial-screen Visualization  
Full-screen Visualization  
11  
Section 11: Appendices  
51  
APPENDIX 1B: SCREEN ICONS QUICK REFERENCE  
In all menus and song lists:  
Ë The arrow icon indicates the menu item being selected.  
In song lists and the “Song Queue” screen:  
C
The music note icon denotes a single track (as opposed to a collection of tracks).  
;)) The speaker with audio waves shows current song playing (only on the “Song Queue”  
screen).  
;
The speaker without audio waves shows current song paused (only on the “Song Queue”  
screen).  
The upward facing radio transmission signal indicates an Internet radio station.  
± The padlock icon indicates protected content that cannot be played. AAC songs purchased  
from the Apple Music Store will have this icon; these songs are not available for playback  
by SoundBridge. If you see this icon on a DRM WMA song, and are playing from WMC  
or another DRM-compatible server, then the SoundBridge may not have completed the  
authentication process with the server yet. Try waiting a minute or two, then hit the Back  
key and re-load the song list.  
X
This indicates an unsupported file format.  
On your “Now Playing” screen:  
The Play icon indicates SoundBridge is in playback mode.  
The Pause icon indicates playback has been paused.  
The Stop icon indicates playback has been stopped.  
The Shuffle icon (with two crossed arrows) indicates playback of your Song Queue is  
happening in random order.  
T The Repeat icon indicates continuous playback of your Song Queue.  
The Repeat Single Track icon indicates continuous playback of the currently playing track.  
Section 11: Appendices  
52  
APPENDIX 2: WI-FI SETUP HELP  
Wi-Fi Setup Instructions  
SoundBridge is configured to automatically connect to your Wi-Fi network during initial setup.  
If you are not able to access Internet radio or music libraries on your Mac or PC, first check your  
network connection by following these steps:  
1. From the Source menu, choose System Configuration and press Select [].  
2. Scroll down to Show Wi-Fi Status and press Select []. If connected, a message displays  
telling you that your wireless network is connected and the name of your network displays.  
Multiple Wi-Fi Networks  
If SoundBridge detects more than one Wi-Fi network, you will be asked to select which SSID  
(network name) you want to use. You will only be asked to select an SSID if you have more than  
one wireless network at your location. If you have more that one network, scroll down to select  
from the Wi-Fi networks you have and press Select [].  
You can also enter the name of a Wi-Fi network. To enter a network name, follow these steps:  
1. From Select Wi-Fi SSID and Password, select Specify a wireless network and press  
Select [].  
2. Use Right/Left [Ð Æ] to find letters, number and spaces in the Wi-Fi network name and  
then press Select [] for each letter, number and space you choose.  
3. Use Up/Down [Â Ì] for “OK,” spaces, delete, commas, periods, accent letters, numbers and  
uppercase or lowercase letters.  
For additional help connecting to your network, including password help, see “Appendix 2: Wi-  
Fi Access Point Password.”  
Entering a Security Key  
If you have a security key, you will need to enter your WEP [Wired Equivalent Privacy (802.11  
encryption protocol)] key. This is the same key you entered into your Access Point and your  
computer. To find more information about your Access Point, see “Appendix 2: “Wi-Fi Access  
Point Password.”  
11  
Section 11: Appendices  
53  
As of this writing, the SoundBridge software is version 2.5 and does not support “WPA”. Check  
for software updates if you need this feature.  
Troubleshooting Wi-Fi Setup  
If you have problems connecting to the SoundBridge to your music library, please check the  
following:  
1. Is the SoundBridge is powered on (is the screen lit)?  
2. Is SoundBridge within range of your wireless network signal? (Performance varies  
depending on wireless network hardware, physical barriers such as walls, and signal  
interference.)  
3. Is your computer on and is your Wi-Fi access point plugged in?  
4. Is your music server software running on your computer? Are your music sharing options  
enabled? (See “Enabling Music Sharing” on page 7.)  
5. If you have a password, did you enter it correctly, including case sensitive characters?  
6. Is your wireless access points (WAP) compatible with SoundBridge? For a list of compatible  
Obtaining Your Wi-Fi Network Name (SSID) and Password (WEP key)  
Your Wi-Fi network’s SSID and password (also known as your Wireless Equivalent Password/  
WEP key) can be obtained from the software that came with your wireless access point. Pay  
attention to uppercase vs. lowercase characters. Please note that some wireless access points  
allow you to create another password/passphrase that they use to generate the WEP key. You  
want the WEP key itself, and not that other password. Below are detailed instructions for where  
to find your SSID and WEP key for several common wires access points. More information is  
forums.  
Section 11: Appendices  
54  
Apple AirPort (Mac Users)  
To see the name and password of your AirPort, follow these steps:  
1. From the Utilities folder, open your AirPort Admin Utility.  
2. Select your AirPort and choose Configure.  
You should then see the display shown on the following page. The line labeled “Wireless  
Network Name” is the name of your network (SSID).  
11  
Section 11: Appendices  
55  
3. If your network is password protected, you should choose Equivalent Network Password  
from the Base Station menu as shown above. Write down the value that appears in the  
dialog as shown below. This is your network password.  
Section 11: Appendices  
56  
Apple AirPort (PC Users)  
1. From Start/Programs/Airport Admin Utility, open the AirPort Admin utility.  
11  
Section 11: Appendices  
57  
2. Select the network you would like to configure. You should then see the configuration  
display below.  
Section 11: Appendices  
58  
3. Make a note of the name of your Wi-Fi network in the Network Name field.  
4. From the Base Station list, select Equivalent Network Password.  
Section 11: Appendices  
11  
59  
5. Write down the displayed password from the dialog box (as illustrated below).  
Section 11: Appendices  
60  
Linksys WAP54G  
Follow these steps for obtaining the hexadecimal WEP key from the WAP54G:  
1. Open a web browser and connect to the access point.  
You connect to the access point by entering the access point’s IP address in the location  
bar of your web browser. If you do not know the IP address of the access point, please  
refer to the software or manual that came with the access point in order to determine  
the IP address. After successfully logging in, you will see a page similar to the following:  
2. Write down the Wi-Fi network name in the MAC Address SSID field.  
3. Click Edit Security Settings to access the WEP setup page. When WEP Security is enabled,  
you can easily view the keys.  
11  
Section 11: Appendices  
61  
4. Key 1 is the default key used by SoundBridge. In this example, 49774B692D is the key  
value.  
This is your Wi-Fi network password.  
5. Close your web browser.  
Section 11: Appendices  
62  
Netgear WG602  
The Netgear WG602 is an 802.11g Wi-Fi Access Point. Its configuration can be accessed with a  
web browser.  
1. Open a web browser and connect to the access point by entering the access point’s IP  
address in the location bar of your web browser. If you do not know the IP address of  
the access point, please refer to the software or manual that came with the access point  
in order to determine the IP address. After successfully logging in, you will see a page  
similar to the following:  
11  
Section 11: Appendices  
63  
2. Note the value of “Wi-Fi Network Name (SSID)”.  
3. Click “Security Settings” on the left side to access the WEP settings. If “WEP” is set to  
“Enable” (as below), you will need to obtain the hexadecimal key for your network.  
Netgear unfortunately, does not allow you to view the current WEP key. However, if you re-  
enter the known passphrase and press “Generate Keys,” then it will regenerate the keys as  
before and allow you to view them:  
Section 11: Appendices  
64  
4. Make a note of the value of the key with the active radio button (the default key, in this  
case “Key 1”: “562E7FF0A0”). This is the password that you will need to enter into your  
SoundBridge’s Wi-Fi setup “Password” field.  
5. Close your web browser.  
Customer Support  
If you are having trouble setting up the SoundBridge, please browse our online support  
an active forum topic dedicated to “SoundBridge Set-up”. Check to see if other users have  
posted information that pertains to your situation. Our Forum is monitored by Roku engineers  
and by our customer support staff. If those options fail, please send an email to Customer  
Support.  
11  
Section 11: Appendices  
65  
APPENDIX 3: END USER SOFTWARE LICENSE AGREEMENT  
IMPORTANT — READ CAREFULLY: By using the software in your SoundBridge, you agree to  
be bound by the license terms and conditions below. If you do not agree to these terms and  
conditions, you must immediately return your SoundBridge in its original condition and  
packaging to the point of purchase for a refund of your purchase price (after inspection).  
iTunes Disclaimer  
Roku SoundBridge interfaces to iTunes using the Apple DAAP protocol, under license from  
Apple. This license gives Apple the right to terminate the license for any reason. Roku has  
no control over this, and is not responsible in the unlikely event Apple does so. In this event,  
Roku will use commercially reasonable efforts to provide software that installs on your PC via a  
download that provides similar functionality, but Roku makes no representations or warranties  
regarding the features available in such a situation.  
Roku Software License  
Subject to these terms and conditions, ROKU grants you a non-exclusive license, with no  
right to sublicense, to execute the software included with the SoundBridge or subsequently  
provided to you by ROKU (together, the “Software”) on your SoundBridge solely for your  
personal use of the intended features and functions of the SoundBridge. The license may  
be transferred only with the transfer of the SoundBridge on which ROKU has installed the  
software; any transferee will be subject to the terms and conditions of this license. This license  
will terminate automatically, without notice, if you fail to comply with the terms and conditions,  
including the restrictions, of this license.  
ROKU and its licensors own and retain all proprietary rights, including all patent, copyright,  
trade secret, trademark and other intellectual property rights, in and to the SoundBridge  
Software. You acknowledge that the license granted above does not provide you with title to  
or ownership of the Software, but only a right of limited use under these terms and conditions.  
The Software embodies ROKU’s trade secrets and other proprietary information and materials.  
Any attempt to modify, enhance, disassemble, decompile, reverse engineer or otherwise  
gain access to the source code to the Software, to remove or unbundle the Software from the  
SoundBridge, or to sublicense or distribute the Software is strictly prohibited, except as may be  
otherwise agreed by ROKU in writing.  
Section 11: Appendices  
66  
Third Party License Information  
Soundbridge includes AES code Copyright © 2003, Dr. Brian Gladman, Worcester, UK.  
This product is protected by certain intellectual property rights of Microsoft Corporation. Use  
or distribution of such technology outside of this product is prohibited without a license from  
Microsoft or an authorized Microsoft subsidiary.  
APPENDIX 4: LIMITED WARRANTY  
Roku SoundBridge is covered by a one year parts and labor warranty.  
Roku SoundBridge Limited Warranty  
1. Warranty. ROKU, LLC (“ROKU”) warrants your SoundBridge and any included accessories  
against defects in material or workmanship as follows:  
For a period of one (1) year from the date of purchase (“Warranty Period”), if ROKU  
determines that the SoundBridge is defective, ROKU will repair the unit or replace the unit  
(with either a new or rebuilt SoundBridge unit), at its option, at no charge and, if applicable,  
will pay the labor charges incurred by any SoundBridge authorized service facility. If the  
Warranty Period has expired, the customer is responsible for the payment of all labor  
charges and may obtain parts from ROKU authorized service facilities or a SoundBridge  
service center at his or her own expense.  
2. Warranty Service Process. To obtain warranty service, you must first obtain an RMA number  
(Return Merchandise Authorization) from a Technical Support Representative at ROKU.  
A Technical Support Representative may be reached by emailing support@rokulabs.  
com or calling our toll free number for customer care (1-866-400-7658 from the US).  
Once an RMA number is obtained, your SoundBridge must be shipped freight prepaid, in  
either its original packaging or packaging affording an equal degree of protection, to the  
SoundBridge authorized distribution facility. If ROKU determines that the returned unit is  
defective, ROKU will either repair the unit or will supply, at no charge and within  
a reasonable period of time, a new or rebuilt SoundBridge unit in exchange for the  
defective unit.  
11  
Section 11: Appendices  
67  
In addition, all accessories must be returned with the defective SoundBridge. A new or  
factory refurbished set of accessories will be furnished with the replacement SoundBridge.  
Failure to return any of the accessory items could result in a delay in receiving the  
replacement SoundBridge, and/or result in an invoice for the missing accessories.  
Important: When emailing for an RMA number, please provide the following information:  
a. model number  
b. serial number  
c. problem description  
d. software version (located in System Configuration menu)  
e. date of purchase  
f. place of purchase (dealer or online place of purchase)  
g. return shipping address (no P.O. boxes)  
Note: Proof of purchase will need to be included in the return shipment in order to  
ensure warranty coverage. In addition, we may attempt to further troubleshoot the  
problem prior to issuing an RMA number. Please be prepared to provide additional  
information upon request.  
3. Scope of and Limitation on Warranty. The warranty on this product is limited to the repair  
or replacement of defective units as described in Section 1 above. This warranty does not  
cover customer training or education, installation, set up adjustments or signal reception  
problems. This warranty does not cover damage due to acts of God, accident, misuse,  
abuse, negligence, commercial use or modification of, or to any part of, your SoundBridge.  
This warranty does not cover damage due to improper operation or maintenance,  
connection to improper voltage supply or attempted repair by anyone other than a  
facility authorized by ROKU to service your SoundBridge. This warranty does not cover  
consumables (such as fuses and batteries). This warranty is valid only in the country of  
purchase from an authorized ROKU distributor or dealer. This warranty is invalid if the  
factory-applied serial number and/or “Warranty Void if Removed” sticker has been altered  
or removed from the SoundBridge.  
Section 11: Appendices  
68  
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE  
REMEDY OF THE CONSUMER. ROKU SHALL NOT BE LIABLE FOR ANY DAMAGES,  
INCLUDING SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, ARISING OUT OF  
OR RELATED TO THIS PRODUCT OR ITS PURCHASE OR USE. EXCEPT TO THE EXTENT  
PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR  
FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO  
THE DURATION OF THIS WARRANTY.  
THE SOUNDBRIDGE INCLUDES SOFTWARE PROVIDED BY THIRD PARTIES. ROKU’S  
WARRANTY DOES NOT APPLY TO THIRD PARTY SOFTWARE, AND ROKU IS NOT  
RESPONSIBLE FOR THIRD PARTY SOFTWARE. ADDITIONAL TERMS AND CONDITIONS,  
INCLUDING DISCLAIMERS OF WARRANTY, FOR THIRD PARTY SOFTWARE CAN BE FOUND  
ELSEWHERE IN THE PRODUCT DOCUMENTATION.  
Some states do not allow the exclusion or limitation of incidental or consequential  
damages, or allow limitations on how long an implied warranty lasts, so the above  
limitations or exclusions may not apply to you. This warranty gives you specific legal  
rights, and you may have other rights which vary from state to state.  
APPENDIX 5: REGULATIONS AND SAFETY  
FCC Warnings and Safety Information  
Communication Regulation & Safety Information  
FCC Compliance  
This section describes the requirements for compliance with Federal Communications  
Commission (FCC) Rules.  
FCC Registration and Requirements  
The following paragraphs describe requirements and information based on FCC rules.  
11  
Section 11: Appendices  
69  
FCC Rules, Part 15  
This equipment has been tested and found to comply with the limits for a class B digital  
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential installation. This equipment generates,  
uses and can radiate radio frequency energy and, if not installed and used in accordance with  
the instructions, may cause harmful interference to radio communications. However, there  
is no guarantee that interference will not occur in a particular installation. If this equipment  
does cause harmful interference to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try to correct the interference by  
one or more of the following measures:  
– Reorient or relocate the receiving antenna;  
– Increase the separation between the equipment and receiver;  
– Connect the equipment into an outlet on a circuit different from that to which the receiver  
is connected;  
– Consult the dealer or an experienced radio/TV technician for help.  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two  
conditions:  
1.This device may not cause harmful interference, and  
2.This device must accept any interference received, including interference that may cause  
undesired operation.  
Responsible party (contact for FCC matters only): Roku, LLC, 399 Sherman Ave. #12, Palo Alto,  
support.  
CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR  
COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.  
Section 11: Appendices  
70  
Canada Class B Statement  
This Class B device meets all requirements of the Canadian interference-causing equipment  
regulations. Cet appareil numérique de la Class B respecte toutes les exigences du Réglement  
sur le materiel brouilleur du Canada.  
Important Safety Instructions  
1. Read Instructions. All the safety and operating instructions should be read before the  
product is operated.  
2. Retain Instructions. The safety and operating instructions should be retained for future  
reference.  
3. Heed Warnings. All warnings on the product and in the operating instructions should be  
adhered to.  
4. Follow Instructions. All operating and use instructions should be followed.  
5. Cleaning. Unplug this product from the wall outlet before cleaning. Do not use liquid  
cleaners or aerosol cleaners. Use a damp cloth for cleaning.  
6. Water and Moisture. To reduce the risk of fire or electric shock, do not expose this  
appliance to rain or moisture. Apparatus shall not be exposed to dripping or splashing and  
no objects filled with liquids, such as vases, shall be placed on the apparatus. Do not use  
this product near water for example, near a bathtub, wash bowl, kitchen sink or laundry  
tub; in a wet basement; or near a swimming pool; and the like.  
7. Accessories. Do not place this product on an unstable cart, stand, tripod, bracket or  
table. The product may fall, causing serious injury to a child or adult and serious damage  
to the product. Use only with a cart, stand, tripod, bracket or table recommended by the  
manufacturer, or sold with the product. Any mounting of the product should follow the  
manufacturer’s instructions, and should use a mounting accessory recommended by the  
manufacturer. A product and cart combination should be moved with care. Quick stops,  
excessive force and uneven surfaces may cause the product and cart combination to  
overturn.  
11  
Section 11: Appendices  
71  
8. Power Sources. This product should be operated only from the type of power source  
indicated on the marking label. If you are not sure of the type of power supply to your  
home, consult your product dealer or local power company. For products intended to  
operate from battery power, or other sources, refer to the operating instructions.  
9. Grounding or Polarization. This product may be equipped with a polarized alternating-  
current line plug (a plug having one blade wider than the other). This plug will fit into  
the power outlet only one way. This is a safety feature. If you are unable to insert the  
plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact  
your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the  
polarized plug.  
10. Power Cord Protection. Power-supply cords should be routed so that they are not likely to  
be walked on or pinched by items placed upon or against them, paying particular attention  
to cords at plugs, convenience receptacles and the point where they exit from the product.  
11. Overloading. Do not overload wall outlets, extension cords or integral convenience  
receptacles as this can result in a risk of fire or electric shock.  
12. Object and Liquid Entry. Never push objects of any kind into this product through  
openings as they may touch dangerous voltage points or short-out parts that could result  
in a fire or electric shock. Never spill liquid of any kind on the product.  
13. Servicing. Do not attempt to service this product yourself as opening or removing covers  
may expose you to dangerous voltage or other hazards. Refer all servicing to qualified  
service personnel.  
14. Damage Requiring Service. Unplug this product from the wall outlet and refer servicing  
to qualified service personnel under the following conditions:  
– When the power-supply cord or plug is damaged,  
– If liquid has been spilled or objects have fallen into the product,  
– If the product has been exposed to rain or water,  
– If the product does not operate normally by following the operating instructions. Adjust  
72  
only those controls that are covered by the operating instructions as an improper  
adjustment of other controls may result in damage and will often require extensive work by  
a qualified technician to restore the product to its normal operation,  
– If the product has been dropped or damaged in any way, and  
– When the product exhibits a distinct change in performance, this indicates a need for  
service.  
15. Heat. The product should be situated away from heat sources such as radiators, heat  
registers, stoves or other products (including amplifiers) that produce heat.  
Safety/Regulatory Information  
User/Installer Caution  
Your authority to operate this FCC certified equipment could be voided if you make changes or  
modifications not expressly approved by the manufacturer, who is responsible for compliance  
with Part 15 FCC rules.  
European Community  
Complies with EU Directive 89/336/EEC using EN55022:1998, EN55024:1998, EN61000-3-2:2000  
and EN61000-3-3:1995.  
CE Warning: This is a class B product. In a domestic environment this product may cause radio  
interference in which case the user may be required to take adequate measures.  
FCC Radiation Exposure Statement  
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled  
environment. This equipment should be installed and operated with minimum distance 20cm  
between the radiator and your body. This transmitter must not be co-located or operating in  
conjunction with any other antenna or transmitter.  
73  
© Copyright 2006 Roku, LLC. All right reserved. Roku, the Roku logo and  
SoundBridge are trademarks of Roku, LLC in the United States and other  
countries. All other trademarks are trademarks or registered trademarks of  
SoundBridge Wi-Fi Setup Instructions  
Revision 1.2 | August 31, 2004  
Background  
This manual is intended for customers who want to set up the SoundBridge for use with a Wi-Fi  
network. For complete instructions on using SoundBridge, please read the SoundBridge User Guide,  
PDF format.  
Why Wi-Fi?  
With SoundBridge’s wireless functionality, you can now stream music from computers on your wireless  
network to one or more Wi-Fi enabled SoundBridge devices via your wireless access point (WAP). You  
can even connect up to five SoundBridges to one iTunes music library and listen to different tunes in  
every room of your house.  
Wi-Fi setup instructions  
1. Verify that your wireless network is up and running on your computer. If you are setting up this  
wireless network for the first time, please make sure that you have followed your wireless vendor’s  
instruction manual for proper configuration of your wireless access point.  
2. Remove both the left and right end caps of SoundBridge by pressing on the two release tabs labeled  
“push”. If your SoundBridge is currently powered on, press Standby on your remote and then  
disconnect SoundBridge from power by unplugging the AC power cord.  
3. Remove the wireless card from its packaging and insert the card into the CF slot on the left side of  
SoundBridge. Make sure that the “Roku” label and two small status lights are facing away from you as  
you gently push the card into place. (Note: The LED lights will not be illuminated until you power on  
SoundBridge). Be careful, forcing the card into position may damage your device.  
4. If you had been previously using a wired Ethernet connection, disconnect the cord from the  
SoundBridge. Make sure you only have the Wi-Fi card or the wired Ethernet connection attached  
to the device– never both at the same time.  
5. Start up iTunes or SlimServer on your computer, which is connected to your wireless network.  
6. Turn on your Soundbridge by plugging the power cord into the right side of the device, then into the  
wall AC outlet. Verify that the screen displays the Roku logo.  
7. Upon startup, SoundBridge will attempt to connect to any wireless access point within range that  
does not require a password. If your home wireless network requires no password and there are no  
other wireless networks in the vicinity (such as those spilling over from a neighbor's house), then your  
SoundBridge should automatically connect with no additional configuration, and you will see a list of  
music servers on your network to connect to.  
However, it’s possible you will need to configure your wireless network as described below:  
-
If your SoundBridge detects more than one available wireless network, then you will need  
to configure SoundBridge’s Wi-Fi settings. Choose "System Configuration" from the main  
menu, and then select "Select Wi-Fi SSID & Password." You will then see a list of available  
wireless networks. If you see your desired network, select it. If you don't see the desired  
network, make sure that your wireless router is within range and that it is functioning  
properly.  
-
Some wireless networks don't "advertise" themselves (a.k.a., “closed networks”). If your  
wireless access point is functioning properly but you do not see the network listed, you  
should enter your wireless network name by selecting "Specify a wireless network..." (Refer  
to your wireless access point’s documentation or utility software if you don’t know the  
name of your wireless network.)  
-
-
Next, your SoundBridge will ask you whether the wireless connection requires a password.  
If you do not have a wireless password, select “No” and skip to the next section. If you do  
have a wireless password, select “Yes”. Read the instructions on the screen to determine  
what type of wireless password you have on your network. If you are unsure, you may wish  
to refer to your wireless router documentation. (See hints below for help finding your  
wireless access point’s password.)  
Select “OK” to reboot the unit. Upon restarting, SoundBridge should automatically connect  
to the network you have specified.  
If the connection is successful, all the available iTunes and/or SlimServer music libraries will be listed on  
your screen. Use the up and down arrows on your remote to navigate to your desired library and press  
Select to begin browsing your music library..  
Troubleshooting  
If you have problems connecting to the SoundBridge to your music library via Wi-Fi, please check the  
following:  
1. Are the LED lights lit up inside the CompactFlash Wi-Fi adapter? If not, your card is not  
receiving power. Make sure the SoundBridge is powered on (the LED screen is lit). Remove and  
re-insert the CF card with the label facing away from you. It should require gentle pressure to  
be inserted into the CF slot.  
2. Is SoundBridge within range of your wireless network signal? (Performance varies depending  
on wireless network hardware, physical barriers such as walls, and signal interference.)  
3. Is your computer on and your wireless access point plugged in?  
4. Is iTunes or SlimServer running on your computer?  
5. Did you enter your password correctly (if you have one), including case sensitive characters?  
Obtaining your wireless access point’s password  
Follow these instructions to determine your wireless access point password, and be sure to have a pen  
ready to make a note of the case-sensitive password as well as the password type, either hexadecimal  
(hex) or ASCII.  
Example 1: Apple AirPort (Mac Users)  
The Apple Airport is a very popular access point. To see its configuration, open your AirPort Admin  
Utility on your Mac (it is in the Utilities folder). Select your AirPort and choose “Configure”.  
You may need to enter the password for your base station. You should then see the screen below. The  
line labeled “Wireless Network Name:” is the name of your network, also known as an "SSID". You will  
either select this network on the SoundBridge screen or enter it manually if your network is  
“closed”.  
If your network is password protected, you should choose "Equivalent Network Password" from the  
"Base Station" menu (see illustration above) and write down the value that appears in the dialog (see  
illustration below). This is the value you will enter into SoundBridge’s wireless setup password field.  
(Select password type “hex” in the SoundBridge menu.)  
Example 2: Apple AirPort (PC Users)  
Step 1: Open the AirPort Admin utility (Start/Programs/Airport Admin Utility). Select the network you  
would like to configure. You should then see the configuration screen below.  
Step 2: Make a note of the name of your wireless network in the “Network Name” field (see below).  
Step 3: Select the “Equivalent Network Password” from the “Base Station” drop down menu.  
Step 4: Write down the displayed password(s), as well as their format (“hex” in the example below). Press  
OK to close the dialog box.  
Example 3: Linksys WAP54G  
The Linksys WAP54G access point is a popular 802.11g access point. Getting the hexadecimal WEP key  
from the WAP54G is an easy process. First, open a web browser and connect to the access point.  
Connecting to the access point is done by entering the access point’s IP address in the location bar of  
your web browser. If you do not know the IP address of the access point, please refer to the software or  
manual that came with the access point in order to determine the IP address. After successfully logging  
in, you will see a page similar to the following:  
Make a note of the “SSID” (in this case “wireless”), this you will need to enter into the “SSID” field in  
SoundBridge’s wireless setup.  
As you can see in the next illustration, “Wireless Security” is enabled. Click on the “Edit Security  
Settings” button to access the WEP setup page:  
This Linksys access point allows you to easily view the keys. The default key is key number 1, so make a  
note of the value of the “Key 1” field (“49774B692D” in this case). This is the value you will enter into  
SoundBridge’s wireless setup’s “Password” field. You now have the information necessary to configure  
your SoundBridge to connect to your network. You may close you web browser.  
Example 4: Netgear WG602  
The Netgear WG602 is an 802.11g Wireless Access Point. Its configuration can be accessed with a web  
browser. First, open a web browser and connect to the access point by entering the access point’s IP  
address in the location bar of your web browser. If you do not know the IP address of the access point,  
please refer to the software or manual that came with the access point in order to determine the IP  
address. After successfully logging in, you will see a page similar to the following:  
::  
The value of “Wireless Network Name (SSID)” is the SSID that you will enter into the SoundBridge’s  
wireless setup. Next, click on “Security Settings” on the left side to access the WEP settings:  
If “WEP” is set to “Disable”, then you do not need to enter a password to access your wireless network. If  
“WEP” is set to “Enable”, you will need to obtain the hexadecimal key for your network. Netgear  
unfortunately, does not allow you to view the current passphrase or keys. However, if you re-enter the  
known passphrase and press “Generate Keys”, then it will regenerate the keys as before and allow you  
to view the keys:  
Make a note of the value of the key with the active radio button (the default key, in this case “Key 1”:  
“562E7FF0A0”). This is the password that you will need to enter into your SoundBridge’s wireless setup  
“Password” field. You now have the information necessary to set up your wireless network from your  
SoundBridge. You may close your web browser.  
Getting help  
If you are still having trouble setting up your Wi-Fi connection, please browse our web site support  
Monday-Friday 9am-5pm Pacific Time, and usually respond within 24 hours. If you prefer phone  
support, feel free to email us a phone number where you can be reached during business hours.  

Yamaha CDC 655 User Manual
Teac HD 35 CRU 2X User Manual
Sony CLIE World Alarm Clock User Manual
Sony CDX CA530X User Manual
Snapper 1692372 User Manual
Seagate ST93015A User Manual
Seagate Computer Drive ST760211DE User Manual
Samsung GH68 02493A User Manual
Samsung Convoy SCH u640 User Manual
Philips AZ1316 User Manual