Radio Shack SEMI PRO 3 CDG 32 3043 User Manual

32-3043  
semi-pro 3 CD/CDG carousel  
karaoke system with dual cassette  
Thank you for purchasing your Semi-Pro 3 CDG Carousel Karaoke  
System with Dual Cassette from RadioShack.  
microphone  
remote control  
user’s guide  
Please read this user’s guide before installing,  
setting up and using your new product  
The Basics  
The Basics  
connecting your karaoke system  
operating your karaoke system  
operating your CD/CD+G carousel  
connecting your microphone  
Plug in your karaoke system’s power cord into a standard  
The system has two  
AC outlet.  
microphone jacks. You can  
use the supplied microphone  
to sing along to your favorite  
songs, and connect an  
Turn on your karaoke system and press FUNCTION  
SELECT to select the CD function.  
PLAY/PAUSE  
additional microphone (not  
supplied) for duets, or lead  
and background vocals.  
OPEN/  
CLOSE  
FUNCTION SELECT  
connecting to a tv  
VIDEO OUT  
Press OPEN/CLOSE and insert one disc into the tray, with  
the label facing up. If desired, insert two additional discs in  
the other two trays, by pressing DISC SKIP.  
Press OPEN/CLOSE to close the disc tray and press  
PLAY/PAUSE on your karaoke system or press the number  
matching the desired track on your remote control.  
You can connect your karaoke  
system to a TV or monitor  
and see the words and/or  
images produced by the CDG.  
Plug one end of the supplied  
cable into the VIDEO OUT jack  
and other end into your TV’s  
VIDEO IN jack.  
operating your cassette deck  
Press STOP/EJECT to open the cassette door.  
Insert a cassette, with the exposed tape down and close the  
door.  
connecting an external audio  
component  
STOP/  
EJECT  
You can connect your  
karaoke system to an  
external source, such as  
an equalizer/booster or PA  
system. Connect the  
Press FUNCTION SELECT to select the tape function and  
press PLAY.  
external audio component’s  
AUDIO INPUT jacks to the  
karaoke system’s AUX OUT  
R and L jacks.  
For consecutive play, press PLAY on the TAPE 2 cassette deck you  
want to begin with. Then, press PAUSE and PLAY on the TAPE 1  
next cassette deck. when the first deck stops, the second deck will  
begin.  
AUX OUT L/R jacks  
4
5
The Basics  
recording from a cassette to a cassette  
Beyond the Basics  
using advanced features  
skipping tracks on CDs and CDGs  
Insert a blank cassette in Tape 1.  
Insert a cassette in Tape 2 and press PLAY.  
Press RECORD and PLAY at the same time on  
You can skip backward or forward to the desired track by  
repeatedly pressing SKIP/SEARCH BACKWARD or FORWARD.  
Tape 1.  
PLAY  
search play (For CDs only)  
When playing any audio CD, press and hold down SKIP or .  
The system will search at high speed in the forward or backward  
direction. The CD plays rapidly and you can hear the sound at a  
high speed. To return to normal play, release SKIP.  
MIC  
VOLUME  
SKIP  
MIC  
/ꢁ  
Jack  
MASTER  
VOLUME  
RECORD/PLAY  
PLAY  
repeat play  
recording from a CD/CDG to a cassette  
You can set the CD player to continuously play a single track, all  
tracks, or all of the programmed tracks on a loaded CD.  
Repeatedly press REPEAT on the remote control to select the one  
of the three repeat play modes.  
Insert a blank cassette in Tape 1.  
Open the CD changer and insert a CD/CD+G in the CD  
compartment and press FUNCTION SELECT to select CD  
function.  
RANDOM  
REPEAT 1 – to repeat the current track  
REPEAT 1 DISC – to repeat all tracks on  
one CD  
Press PLAY to start the CD. Then, press RECORD  
and PLAY at the same time on Tape 1.  
operating your karaoke machine  
Connect the supplied microphone to one of the MIC jacks  
and turn on your microphone.  
REPEAT DISC - to repeat all tracks for all  
loaded CDs  
PLAY/PAUSE  
REPEAT  
random play  
Insert a CD/CD+G.  
Rotate the MIC VOLUME or MASTER VOLUME to the  
desired level.  
Sing along with your CD.  
Press RANDOM on the remote control.  
Press PLAY/PAUSE to start random play.  
6
7
Beyond the Basics  
Beyond the Basics  
time display selection  
Repeatedly press DISPLAY on your remote during normal play. You  
will see REMAIN, TOTAL, REMAIN TOTAL on the top left side of the  
display.  
important information  
care and maintenance  
To clean the surface of the unit, simply wipe with a  
soft, clean cloth moistened with plain lukewarm water.  
REMAIN - Remaining playing time for the current track  
TOTAL - Elapsed playing time for the disc  
REMAIN TOTAL - Total remaining playing time for the disc  
To clean the tape heads, pinch the rollers and capstans,  
and wipe using a cotton swab moistened with alcohol or  
head-cleaning fluid.  
The displayed playing times may differ slightly  
from the times listed on the notes accompanying  
the disc.  
Note  
To clean the cassette deck, use a soft, clean moistened  
cloth. Never use chemical cleaners or let liquid inside the  
unit.  
program play  
Handle your CD/CDGs with care.  
If fingerprints, dust or dirt appear on your CD/CDGs, wipe  
with a damp cloth in straight lines from the center to the  
edge. Do not use detergents or abrasive cleaning agents.  
You can program up to 32 selections on up to three discs for play in  
any order.  
The same disc or track can be programmed more  
Notes  
than once.  
warnings and cautions  
Load the disc that you want to program before  
The normal ventilation of this product shall not be impeded  
for intended use.  
starting programmed play.  
This CD player is made and tested to meet exact safety  
standards. It meets FCC requirements and complies with  
the safety performance standards of the U.S. Department of  
Health and Human Services.  
To begin the programming procedure, select the “CD” mode.  
Press PROGRAM and select DISC SELECT or DISC SKIP to  
select the desired disc, in CD player stop mode.  
Press SKIP or the number button on the remote control to  
This CD player uses a laser light beam. Only qualified  
service personnel should remove the cover or attempt to  
service this device, due to possible eye injury.  
select the desired track. P-01 will appear.  
Press PROGRAM to store the selected track.  
Repeat steps 2-4 to program up to 32 tracks.  
Press PLAY/PAUSE to play the programmed tracks.  
The use of controls, adjustments, or procedures other  
than those specified herein might result in hazardous  
radiation exposure.  
To review the programmed tracks, press PROGRAM  
repeatedly, in CD player stop mode.  
The CD player is classified as a Class 1 Laser product. The  
label is located on the rear panel.  
To replace the number of the tracks you want, press  
PROGRAM repeatedly until the desired track appears, and  
repeat steps 3-4 to select and store the new track.  
Invisible laser radiation when open. Avoid exposure to  
beam.  
To erase a programmed sequence at any time, press  
The CD player shall be used only in an open area.  
OPEN/CLOSE, or press STOP after you stop the playing.  
8
9
Beyond the Basics  
Beyond the Basics  
the FCC wants you to know  
troubleshooting  
troubleshooting your CD carousel  
This equipment has been tested and found to comply with the limits for a Class  
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed  
to provide reasonable protection against harmful interference in a residential  
installation. This equipment generates, uses, and can radiate radio frequency energy  
and, if not installed and used in accordance with the instructions, may cause harmful  
interference to radio  
No power when the unit is on - Insert the power plug into the AC outlet.  
No power when plugged into the AC outlet - Check the outlet with a working  
lamp or appliance.  
communications.  
No sound  
Turn up the volume; turn up the volume on the TV or PA system; or,  
turn on the TV or PA system.  
However, there is no guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the equipment off and  
on, the user is encouraged to try to correct the interference by one or more of the  
following measures:  
Follow the directions for “Connecting your Karaoke system.”  
Select the correct function.  
CD player not working properly  
Reorient or relocate the receiving antenna.  
Insert the disc properly; wipe the CD clean; use a new disc.  
Let moisture on disc dry.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to  
which the receiver is connected.  
Disconnect the karaoke machine from the power source for 30 seconds.  
No sound if using home stereo - Select AUX IN as the source for your home  
stereo; or, follow the directions for “Connecting your Karaoke system.”  
Consult your local RadioShack store or an experienced radio/TV technician  
for help.  
No sound if using a TV or VCR - Follow directions for “Connecting your  
Karaoke system.”  
If you cannot eliminate the interference, the FCC requires that you stop  
using your phone.  
Song lyrics leave double image during play - Restart the song selection to  
reset or clear the video screen.  
Changes or modifications not expressly approved by RadioShack may cause  
interference and void the user’s authority to operate the equipment.  
No song lyrics appear on the screen -  
Connect the karaoke machine’s video cable from the VIDEO OUT to your  
TV’s VIDEO IN. Using your TV remote, select the VIDEO input.  
WARNING: To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture.  
Check your connections. Refer to “Connecting your Karaoke system.”  
Check the disc to make sure it is a CD+G.  
RISK OF ELECTRIC SHOCK.  
D O N O T O P E N .  
If it is a CD+G, make sure it is clean.  
troubleshooting your tape deck  
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK. NO USER-  
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.  
Cannot copy from Deck 2 to Deck 1 - Check for correct tape in  
Deck 2.  
This symbol is intended to alert you to the presence of uninsulated  
dangerous voltage within the product’s enclosure that might be of  
sufficient magnitude to constitute a risk of electric shock. Do not  
open the product’s case.  
Distorted sound - Clean the capstan or replace the tape.  
Cannot record - Replace the tape or cover tab openings with adhesive tape;  
or, make sure the Record and Play buttons are pressed down at the same  
time.  
This symbol is intended to inform you that important operating and  
maintenance instructions are included in the literature accompanying  
this product.  
Cannot copy from Deck 2 to Deck 1 - Set the FUNCTION button to TAPE  
mode.  
10  
11  
accessories  
Stop by your local RadioShack store to pick up  
additional accessories for your karaoke system.  
Dynamic  
Full-Sized  
Omnidirectional  
Headphones  
Microphone  
3-Way Bookshelf  
Speaker  
This product is warranted by RadioShack against manufacturing defects in material and workmanship  
under normal use for one (1) year from the date of purchase from RadioShack company-owned stores  
and authorized RadioShack franchisees and dealers. For complete warranty details and exclusions, check  
with your local RadioShack store.  
RadioShack Customer Relations  
200 Taylor Street, 6th Floor, Fort Worth, TX 76102  
04/04  
Printed in China  
32-3043  
05A04  
©2004. RadioShack Corporation.  
All rights reserved. RadioShack and RadioShack.com are  
trademarks used by RadioShack Corporation.  

Toshiba MK2556GSY User Manual
Toshiba HDD MG03ACA200 User Manual
Teac CD 56S User Manual
Sunbeam MR COFFEE SPR 062609 User Manual
Sony HVR DR60 User Manual
Siemens CXV70 User Manual
Research In Motion Blackberry Cell Phone Z10 User Manual
Pioneer CD Player Pioneer Multi Player User Manual
Philips PCA103CD User Manual
Oracle Audio Technologies ORACLE9I B10508 01 User Manual