TECHNICAL INFORMATION BULLETIN
TIB # 190112
PRV-LX1 – General Maintenance Practices
OVERVIEW:
The PRV-LX1 is a professional-level DVD recorder designed to provide many hours of video
recording and playback performance. While every operating environment is unique, there are some
general maintenance practices you can follow to keep your PRV-LX1 running at optimal performance.
This document offers some general guidelines and maintenance recommendations for the PRV-LX1.
•
•
•
Run a system check on the hard disk drive (HDD)
Clean the filters on the front of the unit
Check the Read/Write hours on the DVD drives
TECHNICAL DETAILS:
For details about the general maintenance practices noted above, refer to the following sections. If
you have questions or need additional assistance please contact your Pioneer representative.
WARNING: Removing the PRV-LX1 cover automatically voids the warranty. Proceed
with the drive replacement only if your unit is already out of warranty or
you accept to knowingly voiding the warranty.
We strongly recommend that you send your PRV-LX1 to Pioneer Service for
any repairs or part replacement. Pioneer offers a free loaner PRV-LX1 while
your unit is being serviced.
HDD System Check
To maintain optimal performance, run a system check on the HDD about every three months. If the
recorder is used heavily, perform the HDD system check more frequently.
The HDD system check option is available under the System > HDD Tools menu. The process
locates and repairs minor HDD errors and logs errors that the recorder is unable to repair. All results
are displayed on your connected monitor.
To run a system check on the HDD, power on the PRV-LX1 and follow the directions below. Although
these instructions refer to the front panel, you may use the front panel, the remote control, or a USB
mouse to make selections from the PRV-LX1 menu.
1. Press the Function button on the front panel to access the Function Menu.
Pioneer Electronics (USA) Inc.
Released: Aug-2007
Home & Business Group of America
Page 1 of 5
(800) 872-4159
TIB #190112
To determine when to replace versus clean filters, refer to the following chart:
Clean The Filters
Replace the Filters (Part # DEC2530)
9 cover or filter feels greasy to the touch
9 grime on filter cover can be wiped away
9 visible dirt on the filter is removable with
a small vacuuming device
9 any dirt or debris remains after wiping the
cover or vacuuming the filter
(available commercially)
The replacement filter (P/N DEC2530) is available from the Pioneer Electronic Service organization.
or call (800) 228-7221 for the Parts Department
The replacement part DEC2530 consists of a single filter. Replace both front filters at the same time
to keep the PRV-LX1 at top performance. Follow the directions below to replace a filter.
1. Confirm that the PRV-LX1 is in Standby (indicator light is orange).
If the PRV-LX1 is not in Standby, stop any current operation then press and hold the
STANDBY/ON button for at least two seconds to place the recorder in Standby.
2. Turn the main power off.
Set the rear power switch to OFF.
3. Disconnect the power plug from the outlet.
4. Slide a front filter cover down while pulling the bottom edge slightly away to remove it.
Do not discard this cover as it is reused.
Pioneer Electronics (USA) Inc.
Released: Aug-2007
TIB #190112
5. Pinch the air filter with your fingertips and pull it from the vent hole.
6. Insert the new filter so that the four cut-away portions align with the four ribs on the air intake.
When installing a new filter, do not bend or fold the filter material.
7. Align the filter cover’s three hooks directly below the corresponding holes on the air intakes.
8. Hold the cover carefully into place.
9. Slide the filter cover back up into place.
Confirm that the three hooks fasten securely with a “click” or until you feel light resistance.
10. Repeat this process for the other vent.
Pioneer Electronics (USA) Inc.
Released: Aug-2007
TIB #190112
If a filter cover is uneven, dust and other debris can enter the PRV-LX1. Attempting to replace the
cover when the filter is protruding from the air intake may damage the unit. Do not power on the
PRV-LX1 until both the filter and cover are seated properly.
DVD Drive Usage Check/Replacement
Periodically check the READ/WRITE HOURS on the DVD drives (DVD 1 and DVD 2). The PRV-LX1
drives are designed for reliability and high performance. However, operating environments, especially
those that are dusty or poorly ventilated, can contribute to DVD drive failure. If your recorder is in a
mission-critical installation where any downtime is unacceptable, we strongly urge you purchase
spare DVD drives for quick replacement if necessary. Please be aware that replacing a DVD drive
yourself means removing the recorder’s cover which voids the warranty.
The Pioneer Electronics part number for a replacement DVD Writer is DXX2532. This model is
designed specifically as a replacement drive for the PRV-LX1. Installing any other DVD drive in the
recorder causes operating errors. To order a replacement drive DXX2532, call Pioneer Electronics
Service Parts department at (800) 228-7221 or order on-line at: http://parts.pioneerelectronics.com.
To replace a DVD Writer, you need to remove the top cover and unplug all cables from the drive.
Take care when installing the drive so that no cables are pinched and the tray panel is mounted
properly. For more information about drive replacement, refer to the PRV-LX1 Product Information
Bulletin # 190110: PRV-LX1 - DVD Writer Replacement . This document is available for download
If for any reason such as your unit is still in warranty or you are uncomfortable with this procedure,
contact an authorized Pioneer service representative before attempting to replace a drive.
Note: The DXX2532 cannot be used as a second drive if your PRV-LX1 recorder is a single-drive
model. The replacement drive does not include parts critical to a second drive installation. If
you own a single drive version PRV-LX1 and wish to add a second drive, please contact your
Pioneer representative for ordering assistance.
ADDITIONAL INFORMATION:
For more information or for additional assistance with your PRV-LX1 please call the toll-free number
Pioneer Electronics (USA) Inc.
Released: Aug-2007
|