Pioneer DEH 1300R User Manual

High power CD player with RDS tuner  
Operation Manual  
DEH-2330R  
DEH-2300R  
DEH-2300RB  
DEH-1330R  
DEH-1300R  
Key Finder  
Head Unit  
+/– buttons  
LOCAL/BSM button  
EQ button  
CD loading slot  
EJECT button  
AUDIO button  
BAND button  
TA button  
Detach button  
5//2/3 buttons  
PTY button  
Buttons 1–6  
SOURCE button  
2
Before Using This Product  
About This Product  
This product complies with the EMC Directives (89/336/EEC, 92/31/EEC) and CE  
Marking Directive (93/68/EEC).  
The tuner frequencies on this product are allocated for use in Western Europe, Asia, the  
Middle East, Africa and Oceania. Use in other areas may result in improper reception. The  
RDS function operates only in areas with FM stations broadcasting RDS signals.  
About This Manual  
This product features a number of sophisticated functions ensuring superior reception and  
operation. All are designed for the easiest possible use, but many are not self-explanatory.  
This operation manual is intended to help you benefit fully from their potential and to  
maximize your listening enjoyment.  
We recommend that you familiarize yourself with the functions and their operation by  
reading through the manual before you use this product. It is especially important that you  
read and observe the “Precaution” on the next page and in other sections.  
3
Precaution  
• A “CLASS 1 LASER PRODUCT” label is affixed to the bottom of the player.  
• The Pioneer CarStereo-Pass is for use only in Germany.  
• Keep this manual handy as a reference for operating procedures and precautions.  
• Always keep the volume low enough for outside sounds to be audible.  
• Protect this product from moisture.  
• If the battery is disconnected, the preset memory will be erased and must be repro-  
grammed.  
In Case of Trouble  
Should this product fail to operate properly, contact your dealer or nearest authorized  
Pioneer Service Station.  
4
Basic Operation  
To Listen to Music  
The following explains the initial operations required before you can listen to music.  
Note:  
Loading a disc in this product. (Refer to page 7.)  
1. Select the desired source (e.g. Tuner).  
Each press changes the Source ...  
Each press of the SOURCE button selects the desired source in the following order:  
Built-in CD player = Tuner  
Note:  
When no disc is set in this product, built-in CD player source will not change.  
When this product’s blue/white lead is connected to the car’s Auto-antenna relay control terminal,  
the car’s Auto-antenna extends when this product’s source is switched ON. To retract the antenna,  
switch the source OFF.  
2. Raise or lower the volume.  
3. Turn the source OFF.  
Hold for 1 second  
5
Basic Operation of Tuner  
This product’s AF function can be switched ON and OFF. AF should be switched OFF for  
normal tuning operations. (Refer to page 10.)  
Manual and Seek Tuning  
• You can select the tuning method by changing the length of time  
you press the 2/3 button.  
Manual Tuning (step by step)  
0.5 seconds or less  
0.5 seconds or more  
Seek Tuning  
Note:  
If you continue pressing the button for longer than 0.5 seconds, you can skip broadcast  
stations. Seek Tuning starts as soon as you release the button.  
Stereo indicator “” lights when a stereo station is selected.  
Frequency Indicator  
Preset Number Indicator  
Band Indicator  
Preset Tuning  
Band  
F1 (FM1)  
• You can memorize broadcast stations in buttons 1  
through 6 for easy, one-touch station recall.  
= F2 (FM2)  
= MW/LW  
Preset station recall  
2 seconds or less  
2 seconds or more  
Broadcast station preset memory  
Note:  
Up to 12 FM stations (6 in F1 (FM1) and F2 (FM2)) and 6 MW/LW  
stations can be stored in memory.  
You can also use the 5 or buttons to recall broadcast stations  
memorized in buttons 1 through 6.  
6
Basic Operation  
Basic Operation of Built-in CD Player  
Eject  
Note:  
CD Loading Slot  
The CD function can be turned ON/OFF  
with the disc remaining in this product.  
(Refer to page 5.)  
A disc left partially inserted after ejec-  
tion may incur damage or fall out.  
Note:  
The built-in CD player plays one standard 12 cm  
or 8 cm (single) CD at a time. Do not use an  
adapter when playing 8 cm CD.  
Don’t insert any materials except for CD into  
CD loading slot.  
Play Time Indicator  
Track Number Indicator  
Track Search and Fast Forward/Reverse  
• You can select between Track Search or Fast Forward/Reverse by pressing  
the 2/3 button for a different length of time.  
Track Search  
0.5 seconds or less  
Fast Forward/Reverse  
Continue pressing  
Note:  
If a disc cannot be inserted fully or playback fails, make sure the recorded side is down.  
Push the EJECT button and check the disc for damage before reinserting it.  
If a disc is inserted with the recorded side up, it will be ejected automatically after a few moments.  
If the built-in CD player cannot operate properly, an error message (such as “ERROR-14”)  
appears on the display. Refer to “Built-in CD Player’s Error Message” on page 27.  
7
Tuner Operation  
Local Seek Tuning  
This function selects only stations with especially strong signals.  
• Switch the Local ON/OFF  
with the LOCAL/BSM button.  
“LOC”  
Best Stations Memory (BSM)  
The BSM function stores stations in memory automatically.  
• Press the LOCAL/BSM but-  
ton for 2 seconds to switch  
BSM ON.  
The stations with the strongest sig-  
nals will be stored under buttons  
1–6 and in order of their signal  
strength.  
• To cancel the process, press the LOCAL/BSM button before memorization is  
complete.  
8
Using RDS Functions  
What is RDS?  
RDS (Radio Data System) is a system for transmitting data along with FM programs. This  
data, which is inaudible, provides a variety of features such as: program service name, pro-  
gram type display, traffic announcement standby, automatic tuning and program type tun-  
ing, intended to aid radio listeners in tuning to a desired station.  
Note:  
RDS service may not be provided by all stations.  
RDS functions, like AF (Alternative frequencies search) and TA (Traffic Announcement standby),  
are only active when your radio is tuned to RDS stations.  
Program Service Name Display  
With this function, the names of networks/stations providing RDS services replace the fre-  
quency on the display a few seconds after they are tuned in.  
• When you want to know PTY Information or the frequency of the current  
station, change the display.  
Hold for 2 seconds  
Each press of the EQ button for 2 seconds selects the display in the following order:  
Program Service Name = PTY Information = Frequency  
Note:  
After switching displays, if you do not perform an operation within 8 seconds, the Program Service  
Name is automatically displayed.  
7 PTY Information  
PTY (Program Type ID code) information for the currently tuned station appears on the  
display for 8 seconds. The information is correlated with the list in the section “PTY  
Function” on page 14.  
Note:  
If a PTY code of zero is received from a station, “NONE” will be displayed. This indicates that the  
station has not defined its program contents.  
If the signal is too weak for this product to pick up the PTY code, “NO PTY” will be displayed.  
7 Frequency  
The frequency of the current station appears on the display.  
9
AF Function  
The AF (Alternative Frequencies search) function is used to search for other frequencies in  
the same network as the currently tuned station. It automatically retunes the receiver to  
another frequency in the network which is broadcasting a stronger signal when there are  
problems with reception of the currently tuned station or better reception is possible on  
a different frequency.  
Note:  
AF tunes the receiver only to RDS stations when you use Seek tuning or BSM Auto Memory with  
the “AF ” indicator ON.  
When you recall a preset station, the tuner may update the preset station with a new frequency from  
the station’s AF list. (This is only available when using presets on the FM1 band.) No preset num-  
ber appears on the display if the RDS data for the station received differs from that for the original-  
ly stored station.  
Sound may be temporarily interrupted by another program during an AF frequency search.  
When the tuner is tuned to a non-RDS station, the “AF ” indicator flashes.  
AF can be switched ON or OFF independently for each FM band.  
Activating/Deactivating the AF Function  
AF is set to ON by default.  
• Turn AF to OFF.  
Hold for 2 seconds  
“AF ” disappears  
To turn AF back ON, repeat the preceding operation.  
10  
Using RDS Functions  
PI Seek Function  
The tuner searches for another frequency broadcasting the same programming. “PI SEEK”  
appears on the display and the radio volume is muted during a PI Seek. The muting is discon-  
tinued after completion of the PI Seek, whether or not the PI Seek has succeeded. If the PI Seek  
is unsuccessful, the tuner returns to the previous frequency.  
PI Seek  
If the tuner fails to locate a suitable alternative frequency or if the broadcasting signal is  
too weak for proper reception, the PI Seek will automatically start.  
Auto PI Seek (for preset station)  
When preset stations cannot be recalled, as when traveling long distances, this product can  
be set to perform PI Seek also during preset recall.  
The default setting for Auto PI Seek is OFF.  
Note:  
Refer to “Initial Setting” for details on how to switch Auto PI Seek ON/OFF.  
Regional Function  
When AF is used to retune the tuner automatically, REG (regional) limits the selection to  
stations broadcasting regional programs.  
Note:  
Regional programming and regional networks are organized differently depending on the country  
(i.e., they may change according to the hour, state or broadcast area).  
The preset number may disappear on the display if the tuner tunes in a regional station which dif-  
fers from the originally set station.  
REG can be switched ON or OFF independently for each FM band.  
Activating/Deactivating the REG Function  
The REG function is set to ON by default.  
• Turn REG to OFF.  
Hold for 2 seconds  
To turn REG back ON, repeat the preceding operation.  
11  
TA Function  
The TA (Traffic Announcement standby) function lets you receive traffic announcements  
automatically, no matter what source you are listening to. The TA function can be activat-  
ed for either a TP station (a station that broadcasts traffic information) or an EON TP sta-  
tion (a station carrying information which cross-references TP stations).  
Activating/Deactivating the TA Function  
1. Tune in a TP or EON TP station.  
The “TP” indicator lights when the tuner is tuned to a TP station or an EON TP station.  
2. Activate the TA function.  
“TA”  
The “TA” indicator lights, indicating that the tuner is waiting for traffic announcements.  
Repeat the preceding operation when no traffic announcement is being received to deacti-  
vate the TA function.  
Note:  
The system switches back to the original source following traffic announcement reception.  
The TA function can be activated from sources other than tuner if the tuner was last set to the FM  
band but not if it was last set to the MW/LW band.  
If the tuner was last set to FM, turning on the TA function lets you operate other tuning functions  
while listening to sources other than tuner.  
Only TP or EON TP stations are tuned in during the Seek Tuning mode when the “TA” indicator is  
ON.  
Only TP or EON TP stations are stored by BSM when the “TA” indicator is ON.  
12  
Using RDS Functions  
Canceling Traffic Announcements  
• Press the TA button while a traffic announcement is being received to cancel  
the announcement and return to the original source.  
The announcement is canceled but the tuner remains in the TA mode until the TA button is  
pressed again.  
Adjusting the TA Volume  
When a traffic announcement begins, the volume adjusts automatically to a preset level to  
enable you to hear the announcement clearly.  
• Set the volume by adjusting it during reception of a traffic announcement.  
The newly set volume is stored in memory and recalled for subsequent traffic announce-  
ments.  
TP Alarm Function  
About 30 seconds after the “TP” indicator is extinguished due to a weak signal, a 5 second  
beep sounds to remind you to select another TP or EON TP station.  
• If you are listening to the tuner, tune in another TP station or EON TP sta-  
tion.  
In sources other than tuner, the tuner automatically seeks out the TP station with the  
strongest signal in the current area 10 (or 30)* seconds after “TP” disappears from the dis-  
play.  
* Time taken before Seek begins.  
TA function ON  
10 seconds  
30 seconds  
TA, AF functions ON  
13  
PTY Function  
The PTY function enables you to select stations by the type of programming they broad-  
cast (PTY Search). It also provides automatic tuning to emergency broadcasts (PTY  
Alarm).  
Note:  
• PTY code program types are as follows:  
1. NEWS:  
2. AFFAIRS:  
3. INFO:  
News.  
Current affairs.  
General information and advice.  
Sports programs.  
4. SPORT:  
5. EDUCATE: Educational programs.  
6. DRAMA: All radio plays and serials.  
7. CULTURE: Programs concerned with any aspect of national or regional culture.  
8. SCIENCE:  
9. VARIED:  
10. POP MUS:  
Programs about nature, science and technology.  
Light entertainment programs.  
Popular music.  
11. ROCK MUS: Contemporary modern music.  
12. EASY MUS: Easy listening music.  
13. L. CLASS:  
14. CLASSIC:  
15. OTH MUS:  
Light classical music.  
Serious classical music.  
Other types of music, which can’t be categorized.  
16. WEATHER: Weather reports/Meteorological information.  
17. FINANCE: Stock market reports, commerce, trading etc.  
18. CHILDREN: Children’s programs.  
19. SOCIAL: Social affairs programs.  
20. RELIGION: Religion affairs programs or services.  
21. PHONE IN: Phone in based programs.  
22. TOURING:  
23. LEISURE:  
24. JAZZ:  
Travel programs, not for announcements about traffic problem.  
Programs about hobbies and recreational activities.  
Jazz music based programs.  
25. COUNTRY: Country music based programs.  
26. NAT MUS:  
27. OLDIES:  
National music based programs.  
Oldies music, ‘Golden age’ based programs.  
28. FOLK MUS: Folk music based programs.  
29. DOCUMENT: Documentary programs.  
14  
Using RDS Functions  
PTY Search Setting Function  
1. Enter the PTY Search setting mode.  
Hold for 2 seconds  
The name of a program type appears on the display for 5 seconds.  
Note:  
“CURRENT” sets desired PTY to the program type of the current station (only for RDS stations  
broadcasting PTY information).  
2. Select one of the PTYs.  
3. When the desired programming type appears on the display, return to the  
normal display.  
15  
PTY Search Function  
• Initiate a PTY search.  
The tuner searches for a station broadcasting the desired PTY.  
Note:  
The program of some stations may differ from that indicated by the transmitted PTY.  
If no station broadcasting the selected programming type is found, “NOTFOUND” is displayed for  
about 2 seconds, and the tuner returns to the original station.  
PTY Alarm  
PTY Alarm is a special PTY code for announcements regarding emergencies such as nat-  
ural disasters. When the tuner receives the radio alarm code, “ALARM” appears on the  
display and the volume adjusts to the TA volume. When the station stops broadcasting the  
emergency announcement, the system returns to the previous source.  
Note:  
The system switches back to the original source following emergency announcement reception.  
Canceling Emergency Announcements  
• Press the TA button during emergency announcement reception to cancel  
the announcement and return to the previous source.  
16  
Using the Built-in CD Player  
Repeat Play  
Repeat Play plays the same track repeatedly.  
• Switch the Repeat Play  
ON/OFF with the button 5.  
Note:  
If you perform Track Search or Fast Forward/Reverse, Repeat Play is automatically canceled.  
Random Play  
Random Play plays the tracks on a disc in random order for variety.  
• Switch the Random Play  
ON/OFF with the button 4.  
Scan Play  
Scan Play plays the first 10 seconds or so of each track on a disc in succession.  
1. Switch the Scan Play ON with  
the button 3.  
2. When you find the desired  
track, cancel the Scan Play  
with the button 3.  
Note:  
Scan Play is canceled automatically after all the tracks on a disc have been scanned.  
Pause  
Pause pauses the currently playing track.  
• Switch the Pause ON/OFF  
with the button 6.  
17  
Audio Adjustment  
Selecting the Equalizer Curve  
You can switch between Equalizer curves.  
• Press the EQ button to select the desired Equalizer curve.  
Equalizer curve  
POWERFUL (powerful) = NATURAL (natural) = VOCAL (vocal)  
= CUSTOM (custom) = EQ FLAT (flat) = SPR–BASS (super bass)  
Note:  
“CUSTOM” stores an equalizer curve you have made adjustments to. (Refer to “Equalizer Curve  
Adjustment” on page 20.)  
Entering the Audio Menu  
With this Menu, you can adjust the sound quality.  
Note:  
After entering the Audio Menu, if you do not perform an operation within about 30 seconds, the  
Audio Menu is automatically canceled.  
1. Select the desired mode in the Audio Menu.  
Each press changes the Mode ...  
2. Operate a mode.  
3. Cancel the Audio Menu.  
18  
Audio Adjustment  
Audio Menu Functions  
The Audio Menu features the following functions.  
Balance Adjustment (FAD)  
This function allows you to select a Fader/Balance setting that provides ideal listening con-  
ditions in all occupied seats.  
1. Press the AUDIO button and select the Fader/Balance mode (FAD) in the  
Audio Menu.  
2. Adjust front/rear speaker bal-  
5 ∞  
/
ance with the  
buttons.  
“FAD F15” – “FAD R15” is dis-  
played as it moves from front to  
rear.  
3. Adjust left/right speaker bal-  
ance with the 2/3 buttons.  
“BAL L9” – “BAL R9” is displayed  
as it moves from left to right.  
Note:  
“FAD 0” is the proper setting when 2 speakers are in use.  
19  
Equalizer Curve Adjustment (EQ-L/EQ-M/EQ-H)  
You can adjust the currently selected equalizer curve settings as desired. Adjusted  
equalizer curve settings are memorized in “CUSTOM”.  
1. Press the AUDIO button and select the Equalizer mode (EQ-L/EQ-M/EQ-H)  
in the Audio Menu.  
2. Select the band you want to  
adjust with the 2/3 buttons.  
EQ-L (low) += EQ-M (mid)  
+= EQ-H (high)  
3. Boost or attenuate the selected  
band with the 5/buttons.  
The display shows “+6” – “–6”.  
“CUSTOM”  
Note:  
If you make adjustments when a curve other than “CUSTOM” is selected, the newly adjusted curve  
will replace the previous adjusted curve. Then a new curve with “CUSTOM” appears on the display  
while selecting the equalizer curve. (Refer to page 18.)  
Loudness Adjustment (LOUD)  
The Loudness function compensates for deficiencies in the low and high sound ranges at  
low volume. You can select a desired Loudness level.  
1. Press the AUDIO button and select the Loudness mode (LOUD) in the Audio  
Menu.  
2. Switch the Loudness function  
ON/OFF with the 5/but-  
tons.  
“LOUD  
3. Select the desired level with  
the 2/3 buttons.  
LOW (low) += MID (mid)  
+= HI (high)  
20  
Audio Adjustment  
Front Image Enhancer Function (FIE)  
The F.I.E. (Front Image Enhancer) function is a simple method of enhancing front imaging  
by cutting mid- and high-range frequency output from the rear speakers, limiting their out-  
put to low-range frequencies. You can select the frequency you want to cut.  
Precaution:  
When the F.I.E. function is deactivated, the rear speakers output sound of all frequencies, not just  
bass sounds. Reduce the volume before disengaging F.I.E. to prevent a sudden increase in volume.  
1. Press the AUDIO button and select the F.I.E. mode (FIE) in the Audio  
Menu.  
2. Switch the F.I.E. function  
ON/OFF with the 5/but-  
tons.  
3. Select the desired frequency  
with the 2/3 buttons.  
100 += 160 += 250 (Hz)  
Note:  
After switching the F.I.E. function ON, select the Fader/Balance mode in the Audio Menu, and  
adjust front and rear speaker volume levels until they are balanced.  
Switch the F.I.E. function OFF when using a 2-speaker system.  
Source Level Adjustment (SLA)  
The SLA (Source Level Adjustment) function prevents radical leaps in volume level when  
switching between sources. Settings are based on the FM volume, which remains  
unchanged.  
1. Compare the FM volume with the volume of the other source.  
(e.g. Built-in CD player)  
2. Press the AUDIO button and select the SLA mode (SLA) in the Audio Menu.  
3. Increase or decrease the level  
with the 5/buttons.  
The display shows “+4” – “–4”.  
Note:  
Since the FM volume is the control, SLA is not possible in the FM modes.  
The MW/LW volume level, which is different from the FM base setting volume level, can also be  
adjusted similar to sources other than tuner.  
21  
Detaching and Replacing the Front Panel  
Theft Protection  
The front panel of the head unit is detachable to discourage theft.  
Detaching the Front Panel  
1. Eject the front panel.  
2. To remove the front panel,  
pull its right-hand side  
toward you.  
Take care not to grip it tightly or  
drop it.  
3. Use the protective case pro-  
vided to store/carry the  
detached front panel.  
Replacing the Front Panel  
• Replace the front panel by  
clipping it into place.  
Precaution:  
Never use force or grip the display tightly when removing or replacing the front panel.  
Avoid subjecting the front panel to excessive shocks.  
Keep the front panel out of direct sunlight and high temperatures.  
22  
Initial Setting  
Entering the Initial Setting Menu  
With this menu, you can perform initial settings for this product.  
1. Switch the source OFF.  
2. Enter the Initial Setting Menu.  
Hold for 2 seconds  
3. Select a desired mode.  
Each press changes the Mode ...  
4. Operate a mode.  
5. Cancel the Initial Setting Menu.  
Note:  
Holding down the AUDIO button for 2 seconds also cancels the Initial Setting Menu.  
23  
Initial Setting Menu Functions  
The Initial Setting Menu features the following functions.  
Changing the FM Tuning Step (STEP)  
Normally set at 50 kHz during Seek tuning in the FM mode, the tuning step changes to  
100 kHz when the AF or TA mode is activated.  
It may be preferable to set tuning step to 50 kHz in the AF mode.  
1. Press the AUDIO button and select the FM Tuning Step mode (STEP) in the  
Initial Setting Menu.  
2. Select the desired tuning step  
with the 2/3 buttons.  
Note:  
The tuning step remains set at 50 kHz during Manual tuning.  
The tuning step returns to 100 kHz if the battery is temporarily disconnected.  
Switching the Auto PI Seek (A-PI)  
During Preset Station PI Seek operation, you can switch the Auto PI Seek function  
ON/OFF. (Refer to “PI Seek Function” on page 11.)  
1. Press the AUDIO button and select the Auto PI Seek mode (A-PI) in the  
Initial Setting Menu.  
2. Switch the Auto PI Seek  
ON/OFF with the 5/buttons.  
24  
Other Functions  
Cellular Telephone Muting  
Sound from this system is muted automatically when a call is made or received using a  
cellular telephone connected to this product.  
• The sound is turned off, “MUTE” is displayed and no audio adjustment is possible.  
Operation returns to normal when the phone connection is ended.  
25  
CD Player and Care  
Precaution  
• Play only CDs bearing the Compact Disc Digital  
Audio mark.  
• This product is designed for use with conventional,  
fully circular CDs only. Use of shaped CDs are not  
recommended for this product.  
• Check all CDs before playing and discard cracked, scratched or warped discs.  
• Normal playback of CD-R discs other than those recorded with a music CD recorder  
may not be possible.  
• Playback of music CD-R discs, even those recorded with a music CD recorder, may not  
be possible with this product due to disc characteristics or scratches or dirt on the disc.  
Dirt or condensation on the lens inside this product may also prevent playback.  
• Titles and other text information recorded on a CD-R disc may not be displayed by this  
product.  
• Read the precautions with the CD-R discs before using.  
• Wipe dirty or damp discs outward from the center  
with a soft cloth.  
• Avoid touching the recorded (iridescent) surface when handling discs.  
• Store discs in their cases when not in use.  
• Keep discs out of direct sunlight and high temperatures.  
• Do not affix labels or apply chemicals to discs.  
• Condensation may collect inside the player when using the heater in cold weather, inter-  
fering with playback. Turn it off for an hour or so and wipe damp discs with a soft cloth.  
• Road shocks may interrupt CD playback.  
26  
CD Player and Care  
Built-in CD Player’s Error Message  
When problems occur with CD playback, an error message appears on the display. Refer  
to the table below to identify the problem, then take the suggested corrective action. If the  
error persists, contact your dealer or your nearest PIONEER Service Center.  
Message  
Possible cause  
Dirty disc.  
Recommended action  
Clean the disc.  
ERROR- 11, 12, 17, 30  
ERROR- 11, 12, 17, 30  
ERROR- 14  
Scratched disc.  
Unrecorded CD.  
Replace the disc.  
Check the disc.  
ERROR- 10, 11, 12, 14,  
17, 30, A0  
Electrical or mechanical  
problem.  
Turn the ignition ON and OFF, or  
switch to a different source, then back  
to the CD player.  
HEAT  
CD player overheating.  
Discontinue play until the machine  
temperature drops.  
27  
Specifications  
General  
CD player  
Power source .......... 14.4 V DC (10.8 – 15.1 V allowable)  
Grounding system ........................................ Negative type  
Max. current consumption ...................................... 10.0 A  
Dimensions  
System .................................... Compact disc audio system  
Usable discs .................................................. Compact disc  
Signal format...................... Sampling frequency: 44.1 kHz  
Number of quantization bits: 16; linear  
(mounting size) ...... 178 (W) ´ 50 (H) ´ 159 (D) mm  
(front face) .............. 188 (W) ´ 58 (H) ´ 19 (D) mm  
Weight ...................................................................... 1.4 kg  
Frequency characteristics................ 5 – 20,000 Hz (±1 dB)  
Signal-to-noise ratio ........ 94 dB (1 kHz) (IEC-A network)  
Dynamic range ............................................ 92 dB (1 kHz)  
Number of channels ............................................ 2 (stereo)  
Amplifier  
Maximum power output  
FM tuner  
(DEH-2330R, DEH-2300R,DEH-2300RB)  
...................................................................... 50 W ´ 4  
(DEH-1330R, DEH-1300R) ........................ 45 W ´ 4  
Frequency range ...................................... 87.5 – 108 MHz  
Usable sensitivity  
.................... 9 dBf (0.8 mV/75 W, mono, S/N: 30 dB)  
50 dB quieting sensitivity .... 15 dBf (1.5 mV/75 W, mono)  
Signal-to-noise ratio ...................... 70 dB (IEC-A network)  
Distortion .......................... 0.3% (at 65 dBf, 1 kHz, stereo)  
Frequency response ...................... 30 – 15,000 Hz (±3 dB)  
Stereo separation .......................... 40 dB (at 65 dBf, 1 kHz)  
Continuous power output  
(DEH-2330R, DEH-2300R,DEH-2300RB)  
...................................................................... 27 W ´ 4  
(DEH-1330R, DEH-1300R) ........................ 25 W ´ 4  
(DIN45324, +B = 14.4 V)  
MW tuner  
Load impedance .......................... 4 W (4 – 8 W allowable)  
Preout maximum output  
level/output impedance ............................ 2.2 V/1 k½  
Equalizer (3-Band Equalizer)  
Frequency range ........................ 531 – 1,602 kHz (9 kHz)  
Usable sensitivity .............................. 18 mV (S/N: 20 dB)  
Selectivity .................................................. 50 dB (±9 kHz)  
(Low) .................................................. Level: ±12 dB  
(Mid) .................................................... Level: ±12 dB  
(High) .................................................. Level: ±12 dB  
Loudness contour  
LW tuner  
Frequency range ........................................ 153 – 281 kHz  
Usable sensitivity .............................. 30 mV (S/N: 20 dB)  
Selectivity .................................................. 50 dB (±9 kHz)  
(Low) .................. +3.5 dB (100 Hz), +3 dB (10 kHz)  
(Mid) ................ +10 dB (100 Hz), +6.5 dB (10 kHz)  
(High) ................ +11 dB (100 Hz), +11 dB (10 kHz)  
(volume: –30 dB)  
Note:  
Specifications and the design are subject to possi-  
ble modification without notice due to improve-  
ments.  
28  
PIONEER CORPORATION  
4-1, MEGURO 1-CHOME, MEGURO-KU, TOKYO 153-8654, JAPAN  
PIONEER ELECTRONICS (USA) INC.  
P.O. Box 1760, Long Beach, California 90801, U.S.A.  
TEL: (800) 421-1404  
PIONEER EUROPE NV  
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium  
TEL: (0) 3/570.05.11  
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.  
178-184 Boundary Road, Braeside, Victoria 3195, Australia  
TEL: (03) 9586-6300  
PIONEER ELECTRONICS OF CANADA, INC.  
300 Allstate Parkway, Markham, Ontario L3R OP2, Canada  
TEL: (905) 479-4411  
Published by Pioneer Corporation.  
Copyright © 2000 by Pioneer Corporation.  
All rights reserved.  
PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.  
San Lorenzo 1009 3er. Piso Desp. 302  
Col. Del Valle Mexico, D.F. C.P. 03100  
TEL: 5-688-52-90  
Publication de Pioneer Corporation.  
Copyright © 2000 Pioneer Corporation.  
Tous droits de reproduction et de traduction  
réservés.  
Printed in  
Imprimé  
<KKYLL/00G00000>  
<CRD3276-A/JS> EW  

VTech LS6425 User Manual
Stanton CM203 User Manual
Sony ICF C470 User Manual
Seagate SV355 SERIES SATA ST31000525SV User Manual
Seagate ATA Interface Disc Drives ST94811A User Manual
SanDisk SDUFD2AK 4096 User Manual
Samsung Spinpiont HM100JI User Manual
Samsung SPH N400 User Manual
Philips US2 PH62022 User Manual
Norcent Technologies SDMC 1GB UPC 803802972014 User Manual