Pioneer CD Player CDJ 2000NXS User Manual

MULTI PLAYER  
CDJ-2000NXS  
CDJ-2000nexus  
The Pioneer website shown above offers FAQs, information on software and various other types of information  
and services to allow you to use your product in greater comfort.  
For inquiries on rekordbox™, please see the support site indicated above.  
Operating Instructions  
SD & USB Export  
rekordbox music files and management data can be exchanged using  
storage devices (SD, USB). This eliminates the need to take the com-  
puter to discos or clubs.  
Before start  
At home or in a studio  
Features  
This unit is a multi player for professional DJs, offering the variety of  
functions, durability and operability required for working in discos and  
nightclubs.  
rekordbox  
!
!
Add music files to collections and analyze them.  
Make the preparations on rekordbox.  
MULTI MEDIA, MULTI FORMAT  
The CDJ-2000 can play not only discs (CDs and DVDs), but also music  
files recorded on SD memory cards and USB devices (flash memory  
drives and hard disks). Supported music file formats include not only  
music CD (CD-DA) and MP3 but also AAC, WAV and AIFF.  
rekordbox  
The included rekordbox (Mac/Windows) music management software  
can be used to prepare playlists, cues, loops, hot cues and beat grids  
required for DJ play unhurriedly at home. This allows you to devote all  
your attention to your DJ performance at the disco/nightclub on the day  
of the performance, with total assurance. From acquiring music files to  
DJ performances, all steps in the cycle of the DJ’s work can be accom-  
plished smoothly.  
Export the rekordbox data on a storage device (SD, USB).  
At the disco or club  
rekordbox (Mac/Windows)  
rekordbox is a software program allowing users who have purchased  
a Pioneer DJ player supporting rekordbox to manage music files to be  
used for DJ performances.  
The included rekordbox music management software can be used  
for the management (analysis, settings, creation, history storage) of  
music files on computers. Using music files managed with rekordbox in  
combination with this unit makes it possible to achieve outstanding DJ  
performances.  
Connect the storage device (SD, USB) to the DJ player.  
In these operating instructions, the version of rekordbox for Mac/  
Windows is referred to as “rekordbox (Mac/Windows)”. “rekordbox” is  
used to indicate the versions of rekordbox (Mac/Windows) and rekord-  
box (iOS/Android) simultaneously, as well as when referring to rekordbox  
functions directly.  
rekordbox (iOS/Android)  
rekordbox (iOS/Android), a smartphone application that can be down-  
loaded free of charge, can be used for the management (analysis, set-  
tings, creation, history storage) of music files on mobile devices. Using  
music files managed with rekordbox (iOS/Android) in combination with  
this unit makes it possible to achieve outstanding DJ performances.  
!
!
Use the rekordbox data for the performance.  
Share the rekordbox data using the PRO DJ LINK function.  
Date:2011.11.5  
Title:Pro DJ Music,  
Artist: Pioneer  
!
In these operating instructions, the version of rekordbox for mobile  
devices is referred to as “rekordbox (iOS/Android)”.  
The playback history is stored on the storage device (SD, USB).  
PRO DJ LINK  
Two types of PRO DJ LINK functions are provided: “SD & USB Export”  
using an SD memory card or USB device (flash memory device or hard  
disk) and “rekordbox LINK Export” using a computer on which rekordbox  
is installed.  
At home or in a studio  
Date:2011.11.5  
Title:Pro DJ Music,  
Artist: Pioneer  
rekordbox  
Check and manage the playback history with rekordbox.  
En  
3
rekordbox LINK Export  
MY SETTINGS  
When this unit and a computer are connected by LAN cable, the rekord-  
box music files and management data can be exchanged directly. This  
eliminates the need to export the data to a storage device (SD, USB).  
Wireless connection using a wireless LAN router (or wireless LAN  
access point) is also possible.  
Some of this unit’s settings can be written onto and called out from  
storage devices (SD, USB). It is also possible to make this unit’s settings  
using rekordbox. The settings you use at home can be called out imme-  
diately, so you can devote all your attention to your performance at the  
disco/nightclub, with total assurance.  
At home or in a studio  
BROWSE  
rekordbox  
A large 6.1-inch color LCD is used to display not only text data but also  
jacket photos. The combination of a GUI displaying music file informa-  
tion in easily understandable fashion and a rotary selector with easy  
operation lets you select tracks with no stress.  
!
!
Add music files to collections and analyze them.  
Make the preparations on rekordbox.  
WAVE ZOOM  
An enlarged waveform of the track that can be enlarged or reduced is  
displayed. This enlarged waveform is color-coded by band, allowing you  
to check the track’s information visually in greater detail.  
At the disco or club  
rekordbox  
BEAT COUNTDOWN  
The number of beats remaining to the stored cue points is displayed.  
When cue points are set and stored in advance at breaks in the tracks,  
etc., this gives you an accurate account of the number of beats to the  
set point.  
QUANTIZE  
Connect the computer and DJ player.  
The CDJ-2000NXS is equipped with a quantize function for putting a  
track on beat even when the button is pressed roughly, as long as the  
track has been analyzed with rekordbox. When setting real time cues  
and hot cues, the beat is automatically set to the beat closest to the posi-  
tion at which the button was pressed.  
rekordbox  
On this unit, accurate, on-beat performances are possible without break-  
ing the rhythm of the currently playing track, not only when making  
settings but also when using such functions as looping, reversing and  
hot cueing during playback.  
SLIP MODE  
This unit is equipped with a slip mode function that keeps the track mov-  
ing in the background while looping, reversing, scratching, hot cueing or  
pausing. This enables innovative DJ performances while maintaining the  
original track’s development, even after looping, reversing, scratching,  
hot cueing or pausing are finished.  
!
!
Use the rekordbox data for the performance.  
Share the rekordbox data using the PRO DJ LINK function.  
At home or in a studio  
HIGH SOUND QUALITY  
The CDJ-2000NXS is designed for thorough improvement of the sound  
quality, for both the digital and analog outputs.  
Date:2011.11.5  
Title:Pro DJ Music,  
Artist: Pioneer  
For the digital circuitry, a high performance Wolfson D/A converter is  
used to faithfully reproduce even the most delicate sounds, achieving  
clear, high quality sound with a rich sense of mass and acoustic field.  
For the analog circuitry, a hybrid OP amplifier is used to reduce to the  
utmost limits that inaudible noise of 20 kHz and higher that can blur  
the original sound. Unwanted digital noise is shut out to achieve clear,  
highly transparent sound faithful to the original.  
rekordbox  
Check and manage the playback history with rekordbox.  
BEAT SYNC  
SOUND CARD  
This unit is equipped with exclusive interface and MIDI interface for  
controlling the DJ software of other brands. There is also a built-in sound  
card, so other equipment can be connected easily.  
The tempo and beat position of the track to be played on this unit can  
automatically be matched to another DJ player connected by PRO  
DJ LINK. The assistance to mixing provided by the beat sync function  
makes it possible to hold performances with mixing, effects, etc., greatly  
expanding the range of DJ performances. (The tracks must be analyzed  
ahead of time with rekordbox in order to use the beat sync function.)  
4
En  
2
Titles, album names and artist names recorded in the CD-Text data are dis-  
played. When multiple text data are recorded on the disc, the information for the  
first text data is displayed.  
Before you start  
Discs that cannot be played  
!
!
!
!
!
!
!
!
!
DTS-CD  
Photo CDs  
Video CDs  
CD Graphics (CD-G) discs  
Unfinalized CDs  
DVD-Video discs  
DVD-Audio discs  
DVD-RAM discs  
Unfinalized DVDs  
Supported sources  
This unit supports the sources listed below.  
!
!
!
!
Discs (page 5)  
USB devices (page 6)  
SD memory card (page 6)  
Computers (page 24)  
About the included CD-ROM  
This unit can be used in combination with a computer when the software  
is installed onto the computer from the included CD-ROM.  
The included CD-ROM contains the following two software programs.  
About CD-R/-RW discs  
Music files (MP3/AAC/WAV/AIFF) recorded on CD-R/-RW discs can be  
played.  
!
!
rekordbox (Mac/Windows) music management software  
Driver software  
Max. 8 layers (files in folders beyond the 8th layer cannot be  
Folder layers  
played)  
Max. number of  
2 000 folders  
folders  
Usable media  
Max. number  
3 000 files  
of files  
About discs  
This unit can play the discs shown below.  
When there are many folders or files, some time may be required for  
loading.  
Compatible  
formats  
Supported file  
systems  
Type  
Mark 1  
Playback of discs created on a computer or DVD  
recorder  
Depending on the application’s settings and the computer’s environ-  
ment settings, it may not be possible to play discs created on a com-  
puter. Record discs in a format playable on this unit. For details, contact  
your application’s selling agent.  
!
Music CD  
(CD-DA)  
CD  
It may not be possible to play discs created on a computer or DVD  
recorder due to the disc’s properties, scratches or dirt, or poor recording  
quality (dirt on the recording lens, etc.).  
CD-R  
See Handling discs on page 46 for instructions on handling discs.  
!
!
Music CD  
(CD-DA)  
CD-ROM  
ISO9660 level 1,  
ISO9660 level 2,  
Romeo and Joliet  
Creating backup discs  
When CD-R/-RW, DVD-R/-RW, DVD+R/+RW, DVD-R DL (dual layer)  
and DVD+R DL (dual layer) discs are paused or left in the pause mode  
at cue points for long periods of time, it may become difficult to play the  
disc that point, due to the properties of the disc. When a specific point  
is looped repeatedly an extremely large number of times, it may become  
difficult to play that point.  
CD-RW  
When playing valuable discs, we recommend making backup discs.  
2
CD-TEXT  
Music CD (CD-DA)  
Regarding copy protected CDs  
This unit is designed to CD standards. Operation and performance of  
discs with standards other than CD standards is not guaranteed.  
DVD-R  
DVD-R  
DL (dual  
layer)  
About playing DualDiscs  
A DualDisc is a new two-sided disc, one side of which contains DVD  
content — video, audio, etc. — while the other side contains non-DVD  
content such as digital audio material.  
ISO9660 level 1,  
ISO9660 level 2,  
Romeo and Joliet  
The non-DVD, audio side of the disc is not compatible with this player.  
For more detailed information on the DualDisc specification, please refer  
to the disc manufacturer or disc retailer.  
DVD-RW  
DVD-ROM  
DVD+R  
DVD+R  
DL (dual  
layer)  
About 8 cm discs  
8 cm discs cannot be played. Do not mount 8 cm adapters on discs and  
play the discs on this unit. The adapter could come off while the disc is  
rotating, damaging both the disc and this unit.  
DVD+RW  
1
Discs on which the marks on this table are indicated on the disc label, package  
or jacket can be played.  
En  
5
About SD memory cards  
About USB devices  
Music files (MP3/AAC/WAV/AIFF) recorded on SD memory cards con-  
forming to SD standards can be played.  
This unit supports USB mass storage class USB devices (external hard  
disks, portable flash memory devices, digital audio players, etc.).  
Such data as disc identification information, cue points, loop points and  
hot cues can be recorded on SD memory cards.  
Max. 8 layers (files in folders beyond the 8th layer cannot be  
Folder layers  
played)  
In this manual, “SD memory card” collectively refers to SD memory  
cards, SDHC memory cards, mini-SD memory cards mounted in SD  
memory card adapters and micro-SD memory cards mounted in SD  
memory card adapters.  
Max. number of  
folders  
Unlimited (folders beyond the 10 000th folder within a single  
folder cannot be displayed)  
Max. number  
of files  
Unlimited (files beyond the 10 000th file within a single folder  
cannot be displayed)  
Max. 8 layers (files in folders beyond the 8th layer cannot be  
Supported file  
systems  
Folder layers  
played)  
FAT16, FAT32 and HFS+ (NTFS is not supported.)  
Max. number of Unlimited (folders beyond the 10 000th folder within a single  
Tracks managed by rekordbox (iOS/Android) can be played by connect-  
ing the mobile device on which rekordbox (iOS/Android) is installed  
neerdj.com/support/). For instructions on rekordbox (iOS/Android), see  
the rekordbox (iOS/Android) user’s manual.  
When there are many folders or files, some time may be required for  
loading.  
Folders and files exceeding the limits cannot be displayed.  
folders  
folder cannot be displayed)  
Max. number  
of files  
Unlimited (files beyond the 10 000th file within a single folder  
cannot be displayed)  
Supported  
cards  
!
!
SD memory cards: 8 MB – 2 GB  
SDHC memory cards: 4 GB – 32 GB  
1
!
SD memory cards: FAT12 and FAT16 (conforming to SD  
standards)  
SDHC memory cards: FAT32 (conforming to SD standards)  
Compatible  
formats  
!
1
CPRM is not supported.  
USB devices that cannot be used  
!
If an SD memory card not formatted in one of the above compatible  
formats is inserted, [FORMAT SD] is displayed and the card cannot  
be used. Re-format the card on a computer, etc., before using it.  
Pioneer does not guarantee that all SD memory cards will operate on  
this unit.  
!
Optical disc type devices such as external DVD/CD drives, etc., are  
not supported.  
!
!
!
USB hubs cannot be used.  
iPods cannot be used. (Music data on an iPad, iPod touch or iPhone  
can only be played on this unit if it is added to the rekordbox (iOS/  
Android) library.)  
Cautions on using SD memory cards  
!
SD memory cards are precision electronic devices. Handle them  
with care. Bending, dropping or subjecting SD memory cards to  
strong forces or shocks could break them. Also, do not use or store  
SD memory cards in environments where static electricity or electric  
noise tends to be produced. We recommend periodically making  
copies of valuable data.  
Please note that Pioneer will accept no responsibility whatsoever for  
loss of data recorded by the customer on SD memory cards or other  
direct or indirect problems resulting from connection to this unit.  
After ejecting SD memory cards, store them in their dedicated case,  
etc.  
Cautions on using USB devices  
!
Some USB devices may not operate properly. Please note that  
Pioneer will accept no responsibility whatsoever for loss of data  
stored by the user on USB devices or other direct or indirect prob-  
lems arising due to connection of USB devices to this unit.  
If a current larger than the allowable value is detected at this unit’s  
USB device insertion slot, it may happen that the [USB STOP]  
indicator flashes, the supply of power to the USB device is stopped  
and communications are interrupted. To restore normal operation,  
disconnect the USB device from this unit. Avoid using USB devices  
for which excess currents have been detected. If normal operation is  
not restored using the method above (if communications cannot be  
established), turn this unit’s power off then back on.  
!
!
!
!
Depending on the SD memory card you are using, the desired perfor-  
mance may not be achieved.  
!
If multiple partitions are set on the USB device, only the first partition  
can be used. (When rekordbox library information is present, the  
partition containing the rekordbox library information has priority.)  
USB devices equipped with flash card readers may not operate.  
Depending on the USB device you are using, the desired perfor-  
mance may not be achieved.  
!
!
6
En  
Playable music file formats  
This unit supports music files in the formats shown below.  
Type  
File extension  
Compatible formats  
Bit depth  
Bit rate  
Sampling frequency  
Encoding method  
32 kbps to  
320 kbps  
MPEG-1 AUDIO LAYER-3  
16 bit  
32 kHz, 44.1 kHz, 48 kHz  
CBR, VBR  
MP3  
.mp3  
8 kbps to  
160 kbps  
MPEG-2 AUDIO LAYER-3  
MPEG-4 AAC LC  
16 bit  
16 bit  
16 bit  
16 kHz, 22.05 kHz, 24 kHz  
CBR, VBR  
CBR, VBR  
CBR, VBR  
16 kbps to  
320 kbps  
16 kHz, 22.05 kHz, 24 kHz,  
32 kHz, 44.1 kHz, 48 kHz  
AAC  
.m4a, .aac and .mp4  
16 kbps to  
320 kbps  
16 kHz, 22.05 kHz, 24 kHz,  
32 kHz, 44.1 kHz, 48 kHz  
MPEG-2 AAC LC  
WAV  
AIFF  
.wav  
WAV  
AIFF  
16 bit, 24 bit  
16 bit, 24 bit  
44.1 kHz, 48 kHz  
44.1 kHz, 48 kHz  
Uncompressed PCM  
Uncompressed PCM  
.aif, .aiff  
About MP3 files  
About music file artwork  
MP3 files can have a constant bit rate (CBR) or a variable bit rate (VBR).  
Both types of files can be played on this unit, but the search and super  
fast search functions are slower with VBR files. If your priority is oper-  
ability, we recommend recording MP3 files in CBR.  
The file format for artwork images that can be added to music files is  
JPEG (extensions: “.jpg” or “.jpeg”).  
!
Files larger than 800 x 800 dots cannot be displayed.  
About character displays  
About AAC files  
!
!
!
AAC is the abbreviation of “Advanced Audio Coding”, a basic format  
of audio compression technology used for MPEG-2 and MPEG-4.  
The file format and extension of AAC data depends on the applica-  
tion used to create the data.  
CD-TEXT  
This unit is compatible with CD-TEXT. Titles, album names and artist  
names recorded in CD-TEXT are displayed. When multiple text data is  
recorded, the first text data is displayed. The supported character codes  
are listed below.  
On this unit, in addition to AAC files encoded with iTunes® and with  
the extension “.m4a”, files with the extensions “.aac” and “.mp4” files  
can also be played. However, AAC files that are copyright-protected,  
such as those purchased from the iTunes Store, cannot be played.  
Also, depending on the version of iTunes in which the file was  
encoded, it may not be possible to play the file.  
!
!
!
!
ASCII  
ISO-8859  
MS-JIS  
Mandarin Chinese character code  
MP3/AAC  
About ID3 tags  
The tag information types which can be registered from a music file are  
ID3 tags (v1, v1.1, v2.2.0, v2.3.0, and v2.4.0) or meta tags.  
When displaying track names, etc., to display characters written in local  
codes other than Unicode, change the [LANGUAGE] setting.  
=
Changing the language (p.38)  
En  
7
b
c
To use the Documentation in support of Your Authorized Use;  
and  
To make one copy of the Program solely for backup pur-  
poses, provided that all titles and trademark, copyright and  
restricted rights notices are reproduced on the copy.  
Functions usable in combination  
with a computer  
2
Restrictions. You will not copy or use the Program or  
Documentation except as expressly permitted by this Agreement.  
You will not transfer, sublicense, rent, lease or lend the Program,  
or use it for third-party training, commercial time-sharing or  
service bureau use. You will not Yourself or through any third  
party modify, reverse engineer, disassemble or decompile the  
Program, except to the extent expressly permitted by applicable  
law, and then only after You have notified Pioneer in writing of  
Your intended activities.  
About the included CD-ROM  
This unit can be used in combination with a computer when the software  
is installed onto the computer from the included CD-ROM.  
The included CD-ROM contains the following two software programs.  
rekordbox (Mac/Windows) music management  
3
4
Ownership. Pioneer or its licensor retains all right, title and  
interest in and to all patent, copyright, trademark, trade secret  
and other intellectual property rights in the Program and  
Documentation, and any derivative works thereof. You do not  
acquire any other rights, express or implied, beyond the limited  
license set forth in this Agreement.  
No Support. Pioneer has no obligation to provide support,  
maintenance, upgrades, modifications or new releases for the  
Program or Documentation under this Agreement.  
software  
rekordbox is a software program allowing users who have purchased  
a Pioneer DJ player supporting rekordbox to manage music files to be  
used for DJ performances.  
rekordbox (Mac/Windows) may be used for classifying and  
searching for music files stored on your computer as well  
as creating playlists, all of which can help improve your DJ  
performance.  
rekordbox (Mac/Windows) allows the detecting, measuring,  
and editing of beats, tempos (BPM), and other elements of your  
music files prior to a performance.  
rekordbox (Mac/Windows) may be used to set and store detailed  
point information (for cueing, looping, hot cueing, etc.) prior to a  
performance.  
3 WARRANTY DISCLAIMER  
THE PROGRAM AND DOCUMENTATION ARE PROVIDED “AS IS”  
WITHOUT ANY REPRESENTATIONS OR WARRANTIES, AND YOU  
AGREE TO USE THEM AT YOUR SOLE RISK. TO THE FULLEST EXTENT  
PERMISSIBLE BY LAW, PIONEER EXPRESSLY DISCLAIMS ALL  
WARRANTIES OF ANY KIND WITH RESPECT TO THE PROGRAM AND  
DOCUMENTATION, WHETHER EXPRESS, IMPLIED, STATUTORY,  
OR ARISING OUT OF COURSE OF PERFORMANCE, COURSE OF  
DEALING OR USAGE OF TRADE, INCLUDING ANY WARRANTIES  
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE,  
SATISFACTORY QUALITY, ACCURACY, TITLE OR NON-INFRINGEMENT.  
Not only can various types of point information and playlists prepared  
with rekordbox be used for playback on Pioneer DJ players, the playback  
history, number of times played, point information, etc., can also be fed  
back to rekordbox after playback.  
Driver software  
4 DAMAGES AND REMEDIES FOR BREACH  
You agree that any breach of this Agreement’s restrictions would cause  
Pioneer irreparable harm for which money damages alone would be  
inadequate. In addition to damages and any other remedies to which  
Pioneer may be entitled, You agree that Pioneer may seek injunctive  
relief to prevent the actual, threatened or continued breach of this  
Agreement.  
This driver software is an exclusive ASIO driver for outputting audio  
signals from the computer. To use this unit connected to a computer on  
which Windows is installed, install the driver software on the computer  
beforehand.  
There is no need to install the driver software when using Mac OS X.  
!
For details, see Installing the driver software on page 39.  
5 TERMINATION  
Software end user license agreement  
Pioneer may terminate this Agreement at any time upon Your breach  
of any provision. If this Agreement is terminated, You will stop using  
the Program, permanently delete it from your computer or mobile  
device where it resides, and destroy all copies of the Program and  
Documentation in Your possession, confirming to Pioneer in writing  
that You have done so. Sections 2.2, 2.3, 2.4, 3, 4, 5 and 6 will continue in  
effect after this Agreement’s termination.  
This Software End User License Agreement (“Agreement”) is between  
you (both the individual installing the Program and any single legal  
entity for which the individual is acting) (“You” or “Your”) and PIONEER  
CORPORATION (“Pioneer”).  
TAKING ANY STEP TO SET UP OR INSTALL THE PROGRAM MEANS  
THAT YOU ACCEPT ALL OF THE TERMS OF THIS LICENSE AGREEMENT.  
PERMISSION TO DOWNLOAD AND/OR USE THE PROGRAM IS  
EXPRESSLY CONDITIONED ON YOUR FOLLOWING THESE TERMS.  
WRITTEN OR ELECTRONIC APPROVAL IS NOT REQUIRED TO MAKE  
THIS AGREEMENT VALID AND ENFORCEABLE. IF YOU DO NOT  
AGREE TO ALL OF THE TERMS OF THIS AGREEMENT, YOU ARE NOT  
AUTHORIZED TO USE THE PROGRAM AND MUST STOP INSTALLING IT  
OR UNINSTALL IT, AS APPLICABLE.  
6 GENERAL TERMS  
1
Limitation of Liability. In no event will Pioneer or its subsidiaries  
be liable in connection with this Agreement or its subject matter,  
under any theory of liability, for any indirect, incidental, special,  
consequential or punitive damages, or damages for lost profits,  
revenue, business, savings, data, use, or cost of substitute pro-  
curement, even if advised of the possibility of such damages or if  
such damages are foreseeable. In no event will Pioneer’s liability  
for all damages exceed the amounts actually paid by You to  
Pioneer or its subsidiaries for the Program. The parties acknowl-  
edge that the liability limits and risk allocation in this Agreement  
are reflected in the Program price and are essential elements of  
the bargain between the parties, without which Pioneer would  
not have provided the Program or entered into this Agreement.  
The limitations or exclusions of warranties and liability contained  
in this Agreement do not affect or prejudice Your statutory rights  
as consumer and shall apply to You only to the extent such limita-  
tions or exclusions are permitted under the laws of the jurisdic-  
tion where You are located.  
1 DEFINITIONS  
1
“Documentation” means written documentation, specifications  
and help content made generally available by Pioneer to aid in  
installing and using the Program.  
2
“Program” means all or any part of Pioneer’s software licensed to  
You by Pioneer under this Agreement.  
2
3
2 PROGRAM LICENSE  
1
Limited License. Subject to this Agreement’s restrictions,  
Pioneer grants to You a limited, non-exclusive, non-transferable,  
license (without the right to sublicense):  
a
To install a single copy of the Program in Your computer or  
mobile device, to use the Program only for Your personal pur-  
pose complying with this Agreement and the Documentation  
(“Authorized Use”);  
Severability and Waiver. If any provision of this Agreement is held  
to be illegal, invalid or otherwise unenforceable, that provision  
will be enforced to the extent possible or, if incapable of enforce-  
ment, deemed to be severed and deleted from this Agreement,  
8
En  
and the remainder will continue in full force and effect. The  
waiver by either party of any default or breach of this Agreement  
will not waive any other or subsequent default or breach.  
No Assignment. You may not assign, sell, transfer, delegate or  
otherwise dispose of this Agreement or any rights or obligations  
under it, whether voluntarily or involuntarily, by operation of law  
or otherwise, without Pioneer’s prior written consent. Any pur-  
ported assignment, transfer or delegation by You will be null and  
void. Subject to the foregoing, this Agreement will be binding  
upon and will inure to the benefit of the parties and their respec-  
tive successors and assigns.  
Minimum operating environment for rekordbox  
(Mac/Windows)  
Check that the computer provides the operating environment described  
below before starting installation.  
4
Macintosh computer equipped with  
®
For Mac OS X  
a Dual-Core 1.6 GHz or greater Intel  
processor  
CPU  
®
For Windows 7,  
PC/AT compatible computer equipped  
®
Windows Vista and with a Dual-Core 2.0 GHz or greater  
Windows XP  
®
®
Intel processor  
5
Entire Agreement. This Agreement constitutes the entire agree-  
ment between the parties and supersedes all prior or contem-  
poraneous agreements or representations, whether written or  
oral, concerning its subject matter. This Agreement may not be  
modified or amended without Pioneer’s prior and express written  
consent, and no other act, document, usage or custom will be  
deemed to amend or modify this Agreement.  
Required  
memory  
1 GB or more of RAM  
250 MB or more of free space (not including space for storing  
music files, etc.)  
Hard disk  
Optical drive  
Sound  
Optical disc drive on which the CD-ROM can be read  
Audio output to speakers, headphones, etc. (internal or external  
audio device)  
6
You agree that this Agreement shall be governed and construed  
by and under the laws of Japan.  
For user registration and inquiries, use a web browser support-  
ing 128-bit SSL (Safari 2.0 or greater, Internet Explorer 6.0 or  
greater, etc.).  
Internet  
connection  
®
A USB port for connection of a USB device (flash memory, hard  
disc, etc.) is required to transfer music files to the USB device.  
USB port  
LAN port  
Cautions on copyrights  
rekordbox restricts playback and duplication of copyright-protected  
music contents.  
To transfer music files to a Pioneer DJ player, an Ethernet LAN  
adapter (RJ45 port) is required for communicating with the DJ  
player.  
!
When coded data, etc., for protecting the copyright is embedded in  
the music contents, it may not be possible to operate the program  
normally.  
!
!
Full functionality is not guaranteed on all computers, even those meeting the  
operating environment requirements described above.  
Even with the required memory capacity indicated for the operating environment  
above, in the cases described below the software may not provide full function-  
ality and performance due to lack of memory. In this case, take the necessary  
measures to ensure sufficient free memory. We recommend adding extra  
memory in order to achieve stable performance.  
!
When rekordbox detects that coded data, etc., for protecting the  
copyright is embedded in the music contents, processing (playback,  
reading, etc.) may stop.  
Recordings you have made are for your personal enjoyment and accord-  
ing to copyright laws may not be used without the consent of the copy-  
right holder.  
When there are many tracks being managed in the rekordbox library  
When resident programs and services are running  
!
Music recorded from CDs, etc., is protected by the copyright laws of  
individual countries and by international treaties. It is the full respon-  
sibility of the person who has recorded the music to ensure that it is  
used legally.  
When handling music downloaded from the Internet, etc., it is the  
full responsibility of the person who has downloaded the music to  
ensure that it is used in accordance with the contract concluded  
with the download site.  
!
!
Depending on the computer’s power settings and other factors, the CPU and  
hard disk processing capacity may be insufficient. When using laptop comput-  
ers in particular, always keep the AC power connected and adjust the com-  
puter's settings to maximize performance when using rekordbox.  
Note that problems may arise with the functionality of rekordbox depending on  
other software running on your computer.  
!
Installing rekordbox (Mac/Windows)  
Read Cautions on installing rekordbox (Mac/Windows) carefully before  
installing rekordbox.  
Cautions on installing rekordbox (Mac/  
Windows)  
Installation procedure (Macintosh)  
Read Software end user license agreement carefully before installing  
rekordbox.  
!
Authorization of the computer’s administrator is required to install  
and uninstall rekordbox.  
Log on as the user which was set as the computer’s administrator  
before installing.  
!
The included CD-ROM contains installation programs and operating  
instructions in the following 12 languages:  
English, French, German, Italian, Dutch, Spanish, Portuguese,  
Russian, Chinese (simplified characters), Chinese (traditional char-  
acters), Korean, Japanese.  
1 When the CD-ROM is inserted into the computer’s  
optical drive, the optical drive opens on the screen.  
Double-click the [CD_menu.app] icon.  
!
When using an operating system in any language besides the ones  
listed above, select [English] during the installation procedure.  
!
If the window containing the [CD_menu.app] icon is not displayed  
when the CD-ROM is inserted, use Finder to open the optical drive  
manually and double-click the [CD_menu.app] icon.  
Supported operating systems  
Mac OS X (10.5.8 or later)  
1
1
1
1
®
32-bit version  
64-bit version  
32-bit version  
Windows 7 Home Premium/Professional/  
Ultimate  
®
Windows Vista Home Basic/  
Home Premium/Business/Ultimate (SP2  
or later)  
64-bit version  
32-bit version  
1
1
®
Windows XP Home Edition/  
Professional (SP3 or later)  
En  
9
2 When the CD-ROM’s menu is displayed, select  
[rekordbox: Install Music Management Software], then  
click [Start].  
4 When the license agreement screen appears, read the  
Software end user license agreement carefully. If you  
agree to the Software end user license agreement, click  
[Agree].  
!
If you do not consent to the provisions of the Software end user  
license agreement, click [Cancel] and stop installation.  
5 Install rekordbox by following the instructions on the  
screen.  
!
Click [Cancel] to cancel installation after it has started.  
Launching rekordbox (Mac/Windows)/  
Viewing the Operating Instructions  
Log on as the user which was set as the computer’s administrator before  
using rekordbox.  
!
When rekordbox is started up for the first time, the license key must  
be entered. The license key is affixed to the CD-ROM package.  
!
To close the CD-ROM menu, click [Exit].  
When rekordbox is started up, the operating instructions can be viewed  
3 When the license agreement screen appears, select  
[English], read the Software end user license agreement  
carefully, then click [Continue].  
from the rekordbox [Help] menu.  
!
The Online manual and online support site can be accessed if the  
computer is connected to the Internet.  
!
You can select the one you desire from multiple languages as long  
as the language is supported by the system environment of your  
computer.  
For Mac OS X  
Open the [Application] folder with Finder, then double-  
click [rekordbox 2.x.x.app].  
4 If you agree to the Software end user license  
agreement, click [Agree].  
!
The 2.x.x indicates the rekordbox version.  
!
If you do not consent to the provisions of the Software end user  
license agreement, click [I disagree] and stop installation.  
For Windows® 7, Windows Vista® and Windows®  
5 Install rekordbox by following the instructions on the  
screen.  
XP  
Click on the Windows [Start] menu button, then [All  
Programs] > [Pioneer] > [rekordbox 2.x.x] > [rekordbox  
2.x.x].  
Installation procedure (Windows)  
!
Authorization of the computer’s administrator is required to install  
and uninstall rekordbox.  
!
The 2.x.x indicates the rekordbox version.  
Log on as the user registered as the computer’s administrator before  
installing rekordbox (Mac/Windows).  
Installing rekordbox (iOS/Android)  
Install rekordbox (iOS/Android) on the mobile device (smartphone, tablet  
device, etc.). For instructions on installation and supported operating  
system versions, see our website (http://www.rekordbox.com).  
1 Insert the CD-ROM into the computer’s optical drive.  
The CD-ROM menu is displayed.  
!
If the CD-ROM menu does not appear when the CD-ROM is inserted,  
open the optical drive from [Computer (or My Computer)] in the  
[Start] menu, then double-click the [CD_menu.exe] icon.  
2 When the CD-ROM’s menu is displayed, select  
[rekordbox: Install Music Management Software], then  
click [Start].  
Using the online support site  
Before making inquiries on rekordbox operating procedures or techni-  
cal issues, read the rekordbox (Mac/Windows) operating instructions  
and online manual and check the FAQ provided on the rekordbox online  
support site.  
<rekordbox online support site>  
!
User registration on the rekordbox online support site is required  
prior to making inquiries concerning rekordbox.  
!
You will need to enter your license key during user registration, so  
please have it handy. Also, be sure not to forget the login name (your  
e-mail address) and the password specified for your user registra-  
tion, as well as the license key.  
!
PIONEER CORPORATION collects your personal information for the  
following purposes:  
1
2
3
To provide customer support for your purchased product  
To inform you of product or event information by e-mail  
To obtain feedback collected by survey for product planning  
purposes  
!
To close the CD-ROM menu, click [Exit].  
3 When the language selection screen appears, select  
[English] and click [OK].  
Your personal information is kept confidential corresponding to  
the privacy policy set forth by our company.  
Pioneer’s privacy policy can be viewed on the rekordbox online  
support site.  
!
You can select the one you desire from multiple languages as long  
as the language is supported by the system environment of your  
computer.  
10  
En  
!
!
When making inquiries regarding rekordbox, please be sure to fur-  
nish your computer type and specifications (CPU, installed memory,  
other connected peripherals, etc.), the operating system and version  
used, as well as concrete information regarding the issue at hand.  
To inquire about configuring your computer with non-Pioneer  
peripheral devices and to obtain the corresponding technical  
support, contact the specific manufacturer or retailer.  
Further version updates are anticipated for improved functionality  
and performance of rekordbox. Update programs will be available for  
download on the rekordbox online support site. We strongly recom-  
mend you perform these updates and always use the latest version of  
rekordbox.  
En  
11  
Connections  
!
!
!
Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections.  
Refer to the operating instructions for the component to be connected.  
Connect the power cord after all the connections between devices have been completed.  
!
!
When using a LAN cable for connection, be sure to use either the LAN cable included with this product or an STP (shielded twisted pair) cable.  
Do not disconnect the LAN cable when music files and/or information are being shared using PRO DJ LINK.  
Descriptions of terminals  
POWER  
CONTROL  
AUDIO OUT  
R
CONTROL  
DIGITAL  
OUT  
L
LINK  
1 2 3  
4
5
6
1 AUDIO OUT L/R terminals  
5 LINK terminal  
Connect the audio cables (included) here.  
Connect the LAN cable (included) here.  
2 CONTROL terminal  
6 USB port  
This is used to interconnect DJ players with a monaural mini phone  
plug (Ø 3.5 mm) cable (commercially available) to send control  
signals for relay playback.  
Connect to a computer.  
CAUTION  
=
Connections for relay play (p.15)  
Operating the switches on this unit or the remote control (if supplied)  
may turn off all the indicators as if the power plug were unplugged.  
However, this conforms to the intended specifications and the power  
supply is not disconnected. To shut off the power supply completely,  
you need to unplug the power plug (a power disconnecting device)  
from an AC outlet. Place this unit near an AC outlet with easy access  
to the power plug (a power disconnecting device). Unplug the power  
plug from an AC outlet when this unit will be left unused for a pro-  
longed period. Otherwise, it may cause a fire.  
3 AC IN  
Connect this to a power outlet.  
Connect the power cord after all the connections between devices  
have been completed.  
Be sure to use the included power cord.  
4 DIGITAL OUT terminal  
Connect a digital coaxial cable here.  
Basic style  
Playback on this unit is performed mainly using tracks prepared with rekordbox installed on a computer.  
!
!
!
!
!
For instructions on operating rekordbox, see rekordbox (Mac/Windows)’s operating instructions. The rekordbox (Mac/Windows) operating instruc-  
tions can be viewed from the rekordbox (Mac/Windows) [Help] menu.  
Also, for DJ players and DJ mixers, up to four PRO DJ LINK-compatible players can be connected with LAN cables (CAT5e) using PRO DJ LINK  
connections.  
A switching hub (commercially available) may be necessary, depending on the combination of models used. Use a switching hub of 100 Mbps or  
greater. Some switching hubs may not operate properly.  
A switching hub (commercially available) is necessary to connect to a mixer equipped with only one LAN port. For mixers with enough LAN ports for  
all the DJ players and computers in the system, connect directly to the LAN ports on the mixer’s rear panel, without using a hub.  
Use a wireless router (commercially available) and access point (commercially available) conforming to either IEEE802.11n or IEEE802.11g stan-  
dards. Depending on the signal conditions in the usage environment and the wireless router or access point, PRO DJ LINK connections may not  
operate properly.  
12  
En  
Connecting to a mixer with only one LAN port  
When connecting to a mixer with only one LAN port using a switching hub, in order to use rekordbox’s music file management functions to their maxi-  
mum, set the channel number of the mixer to which the audio or coaxial digital cable is connected and the player number displayed at the bottom left  
of the main unit display to the same number.  
(Ex.: When the audio cable is connected to channel 1)  
Audio cable  
PLAYER 1  
CH 1  
CH 1  
PHONO CD/LINE  
L
NAL GND  
R
To change the player number, follow the procedure below.  
1
2
3
4
Disconnect the storage device (SD, USB) and LAN cable.  
Press the [MENU/UTILITY] button for over 1 second to display the [UTILITY] screen.  
Turn the rotary selector to select [PLAYER No.], then press the rotary selector.  
Turn the rotary selector to select the player number, then press the rotary selector to enter it.  
5
Press the [MENU/UTILITY] button to complete the setting.  
PRO DJ LINK (SD & USB Export)  
!
rekordbox music files and data can be exchanged with this unit using a memory device (flash memory, hard disk, etc.), eliminating the need to take  
a computer into the DJ booth. Such information as playlists, cues, loops and hot cues set in advance with rekordbox can be used for playback.  
USB device on  
which  
rekordbox data  
is recorded  
SD memory  
Computer  
rekordbox  
USB  
STOP  
card on which  
rekordbox data  
is recorded  
SD  
HOT CUE  
Q
Switching hub  
LAN cable  
LAN cable  
•I  
LAN cable  
Audio cable  
LO  
Audio  
cable  
REC / CALL  
L
R
POWER  
CONTROL  
AUDIO OUT  
CONTROL  
DIGITAL  
OUT  
LINK  
DJ player  
DJ mixer  
Rear panel  
Power cord  
To an AC outlet  
En  
13  
PRO DJ LINK (LINK Export)  
!
Tracks in rekordbox can be selected and played when the computer is taken into a DJ booth and connected to a computer on which rekordbox is  
installed by LAN cable (CAT5e) or wireless LAN (Wi-Fi) router. Performances can be held using such information as playlists, cues, loops and hot  
cues that have been set ahead of time with rekordbox.  
!
Tracks in rekordbox can be selected and played when connected to a mobile device on which rekordbox (iOS/Android) is installed by USB cable or  
wireless LAN (Wi-Fi) router. Performances can be held using such information as playlists, cues, loops and hot cues that have been set ahead of  
time with rekordbox.  
!
!
With wired LAN connections, up to two computers on which rekordbox is installed can be connected.  
With wireless LAN (Wi-Fi) connections, up to four computers or mobile devices on which rekordbox is installed can be connected.  
iPods/iPhones/iPads that can be connected to this product  
!
!
This product supports iPod touch (3rd and 4th generation), iPhone 4S, iPhone 4, iPhone 3GS, iPad (3rd generation), iPad 2 and iPad.  
Using a switching hub  
Computer  
Computer  
Mobile device on  
which rekordbox  
is installed  
rekordbox  
rekordbox  
LAN cable × 2  
Switching hub  
USB  
STOP  
LAN cable × 3  
LAN cable  
SD  
QU  
Audio cable  
Audio cable  
× 3  
HOT CUE  
L
R
POWER  
CONTROL  
AUDIO OUT  
CONTROL  
DIGITAL  
OUT  
LINK  
Rear panel  
DJ player × 3  
DJ mixer  
Power cord  
To an AC outlet  
!
!
Use the iPod cable included with this product to connect an iPod, iPhone or iPad to this product.  
A switching hub (commercially available) is necessary to connect to a mixer equipped with only one LAN port. For mixers with enough LAN ports for  
all the DJ players and computers in the system, connect directly to the LAN ports on the mixer’s rear panel, without using a hub.  
Using a wireless router and access points  
Computer  
Computer  
Mobile device on  
which rekordbox  
is installed  
rekordbox  
rekordbox  
Wireless router  
and access points  
LAN cable × 3  
LAN cable  
Audio cable  
Audio cable  
× 3  
L
R
POWER  
CONTROL  
AUDIO OUT  
CONTROL  
DIGITAL  
OUT  
LINK  
Rear panel  
DJ player × 3  
DJ mixer  
Power cord  
To an AC outlet  
14  
En  
Cautions  
To use rekordbox’s music file management functions to their maximum, set the channel of the audio or coaxial digital input cable connected to the  
mixer and the player number to the same number.  
If the player number is different, change the [PLAYER No.] setting on the [UTILITY] screen.  
!
When a storage device is connected to this unit, [PLAYER No.] is displayed in gray and cannot be changed. Disconnect the storage device or LAN  
cable to turn the link off, then change the setting.  
Using other brands of DJ software  
With this unit, the operating information of the buttons, tempo adjustment dial, etc., can also be output in universal MIDI format. When connected by  
USB cable to a computer on which MIDI-compatible DJ software is installed, the DJ software can be operated from the CDJ-2000NXS. The sound of  
music files being played on the computer can also be output from the CDJ-2000NXS. For details, see About the driver software (Windows) on page 39  
and Using other brands of DJ software on page 41.  
!
Connect to a computer on which Mac OS X (10.5.8 or later), Windows Vista®, Windows® XP or Windows 7 is installed.  
Computer  
Other brands of  
DJ software  
USB cable  
USB cable  
Audio cable  
Audio cable  
L
R
POWER  
CONTROL  
UDIO OU
CONTROL  
DIGITAL  
OUT  
LINK  
DJ player  
DJ mixer  
Rear panel  
Power cord  
To an AC outlet  
Connections for relay play  
When this unit and a Pioneer DJ player are interconnected with their [CONTROL] terminals using a mini phone plug cable (Ø 3.5 mm), relay playback  
between the two DJ players is possible (page 31).  
Mini phone plug cable (Ø 3.5 mm)  
Audio cable  
Audio cable  
L
R
POWER  
CONTROL  
AUDIO OUT  
COOL  
DIGITAL  
OUT  
LINK  
DJ player  
DJ mixer  
Rear panel  
Power cord  
To an AC outlet  
En  
15  
Part names and functions  
Control panel  
q r  
s
t
u
v
w
x
rekordbox  
LINK  
p
o
n
m
l
TAG TRACK  
REMOVE  
BACK  
LINK INFO  
UTILITY  
/
BROWSE  
TAG LIST  
INFO  
MENU  
rekordbox  
LINK  
OFF  
ON  
POWER  
STANDBY  
i
h
USB  
y
z
USB  
STOP  
DISC EJECT  
SD  
USB  
g
f
e
d
DISC  
SD  
QUANTIZE TIME MODE  
DISC  
k
j
A
B
C
AUTO CUE  
VINYL  
SD  
QUANTIZE TIME MODE  
SPEED ADJUST  
TOUCH/BRAKE  
HOT CUE  
AUTO CUE  
RELEASE / START  
IN/-4BEAT  
OUT  
RELOOP/EXIT  
LOOP  
NEEDLE SEARCH  
DELETE MEMORY  
CUE/LOOP  
CALL  
DELETE MEMORY  
JOG ADJUST  
CUE/LOOP  
CALL  
c
1/2X LOOP 2X  
1/2X LOOP 2X  
IN ADJUST  
OUT ADJUST  
VINYL  
CDJ  
JOG  
MODE  
LOOP MODE  
D
E
F
G
H
9
a
b
REC / CALL  
LIGHT  
HEAVY  
SLIP  
IN/-4BEAT  
OUT  
RELOOP/EXIT  
BEAT SYNC  
LOOP  
SYNC  
MASTER  
I
J
IN ADJUST  
OUT ADJUST  
DIRECTION  
TEMPO  
LOOP MODE  
6
10 16 WIDE  
FWD  
REV  
8
K
6
5
SLIP  
MASTER  
TEMPO  
7
TRACK SEARCH  
L
4
SEARCH  
3
2
M
0
CUE  
TEMPO  
RESET  
REV  
FWD  
PLAY / PAUSE  
TEMPO  
1
MULTI PLAYER  
CDJ-2000 nexus  
P
O
N
1 PLAY/PAUSE f button  
7 SLIP button  
This lights when playing tracks and flashes when in the pause mode.  
Pausing (p.24)  
=
Using the slip mode (p.29)  
=
8 LOOP MODE button  
2 CUE button  
=
Setting the loop automatically based on the track’s tempo (Auto  
This lights when a cue point is set (except during track searching),  
and flashes when a new cue point can be set in the pause mode.  
Beat Loop) (p.27)  
9 IN/4BEAT (IN ADJUST) button  
=
Setting Cue (p.26)  
Use this to set and fine-adjust the loop in point.  
3 SEARCH m, n buttons  
=
Setting Loop (p.26)  
The track is forwarded/reversed while the button is held in.  
a LOOP OUT (OUT ADJUST) button  
=
Forward and reverse scanning (p.24)  
Use this to set and fine-adjust the loop out point.  
4 TRACK SEARCH o, p buttons  
=
Setting Loop (p.26)  
Use these to search for the beginnings of tracks.  
b RELOOP/EXIT button  
=
Finding the beginnings of tracks (Track Search) (p.24)  
Use this to return to loop playback (reloop) or cancel loop playback  
(loop exit).  
5 REV indicator  
This lights when playing in the reverse direction.  
=
Returning to Loop playback (Reloop) (p.27)  
=
Playing in reverse (p.25)  
c HOT CUE (A, B, C, REC/CALL) buttons  
6 DIRECTION FWD REV lever  
Use this to set, play and call out hot cues.  
Use this to turn reverse playback on and off.  
=
Setting Hot Cue (p.27)  
=
Playing in reverse (p.25)  
16  
En  
d SD memory card indicator  
s TAG LIST button  
This flashes when communicating with the SD memory card.  
Press this to display the [TAG LIST] screen.  
=
Inserting and ejecting SD memory cards (p.22)  
=
Editing tag lists (p.34)  
e SD memory card door  
t INFO/LINK INFO button  
Open and close this door to insert or remove SD memory cards.  
Press this to display the [INFO] screen.  
When pressed for over 1 second, the details of the tracks loaded in  
the DJ player are displayed.  
=
Inserting and ejecting SD memory cards (p.22)  
f SD memory card insertion slot  
=
Displaying the details of the currently loaded track (p.36)  
Load SD memory cards here.  
=
Inserting and ejecting SD memory cards (p.22)  
u MENU/UTILITY button  
When pressed once, the menu screen is displayed.  
The [UTILITY] screen is displayed when this is pressed for over 1  
second.  
g USB STOP button  
Press for at least 2 seconds before disconnecting the USB device.  
=
Connecting and disconnecting USB devices (p.23)  
=
Displaying the [UTILITY] screen (p.37)  
h USB indicator  
v BACK button  
This flashes when this unit is communicating with the USB device.  
Press this once to return to the previous screen.  
Press for over 1 second to move to the top layer.  
=
Connecting and disconnecting USB devices (p.23)  
=
Playing media connected to or inserted in this unit (p.23)  
i USB device insertion slot  
Load the USB device here.  
w TAG TRACK/REMOVE button  
=
Connecting and disconnecting USB devices (p.23)  
Use these to add and remove tracks from the tag list.  
=
Editing tag lists (p.34)  
j TIME MODE/AUTO CUE button  
When pressed once, the main unit display’s time display mode  
(remaining time display or elapsed time display) switches.  
When pressed for over 1 second, auto cue turns on and off.  
x Rotary selector  
When selecting tracks or setting items, the cursor moves when the  
rotary selector is turned. Press the rotary selector to enter.  
=
Setting auto cue (p.26)  
y STANDBY indicator  
k QUANTIZE button  
This lights when in the standby mode.  
Press this to use the quantize function.  
=
Setting the auto standby mode (p.38)  
When the quantize function is set to on, points are automatically  
set to the nearest beat position when setting loop in points, loop out  
points, hot cues and cues.  
z DISC EJECTh button  
Use this to eject discs.  
Also, the hot cue, loop, reverse and slip functions can be used with-  
out breaking the beat.  
=
Ejecting discs (p.22)  
A NEEDLE SEARCH pad  
!
When the quantize function is set to on, [QUANTIZE] is displayed  
on the main unit display.  
The sound is played from the position at which the pad is touched.  
=
Playing from the point touched on the [NEEDLE SEARCH] pad  
(p.30)  
=
Main unit display (p.20)  
The quantize function does not work in the following situations  
([QUANTIZE] is displayed in gray):  
B VINYL SPEED ADJUST TOUCH/BRAKE control  
This adjusts the speed at which playback stops when the top of the  
jog dial is pressed.  
!
!
When playing tracks recorded on discs  
When playing music files that have not been analyzed with  
rekordbox  
=
Adjusting the speed at which playback stops (p.25)  
l DISC button  
C VINYL SPEED ADJUST RELEASE/START control  
This adjusts the speed at which playback returns to the normal  
speed when the top of the jog dial is released.  
Press this to play music files on CDs, CD-ROMs or DVD-ROMs.  
=
Playing media connected to or inserted in this unit (p.23)  
=
Adjusting the speed at which the normal playing speed is reached  
(p.25)  
m SD button  
Press this to play music files on the SD memory card.  
=
Playing media connected to or inserted in this unit (p.23)  
D CUE/LOOP CALL c(LOOP 1/2X), d(LOOP 2X) buttons  
Use these to call out stored cue and loop points.  
n USB button  
=
Calling out stored cue or loop points (p.28)  
Press this to play the music files on a USB device.  
When pressed during loop playback, the loop is cut or extended.  
=
Playing media connected to or inserted in this unit (p.23)  
=
=
Cutting loops (Loop Cut) (p.27)  
Extending loops (loop doubling) (p.27)  
o LINK button  
Press this to play music files on storage device (SD, USB) loaded in  
other DJ players.  
E DELETE button  
Use this to delete cue and loop points.  
=
Playing storage devices (SD, USB) of other players and mobile  
devices on which rekordbox is installed (p.23)  
=
Deleting points individually (p.28)  
F MEMORY button  
p rekordbox button  
Use this to store cue and loop points in the memory.  
Press this to play music files in rekordbox.  
=
Storing cue or loop points (p.28)  
=
Playing the rekordbox library on a computer or mobile device (p.24)  
G JOG MODE button, VINYL mode indicator and CDJ  
q Main unit display  
mode indicator  
The screen switches to the normal playback screen when the  
The mode switches between VINYL and CDJ each time this is  
pressed. The indicator for the selected mode lights.  
[BROWSE], [TAG LIST] and [INFO/LINK INFO] buttons are all turned  
off.  
=
Switching the jog dial mode (p.25)  
=
Main unit display (p.20)  
H JOG ADJUST control  
r BROWSE button  
This adjusts the load applied when the jog dial is spun.  
Press this to display the [BROWSE] screen.  
=
Adjusting the load when the jog dial is spun (p.25)  
=
Switching to the browse screen (p.31)  
En  
17  
I BEAT SYNC MASTER button  
Use this to set the track loaded in this unit as the master for the beat  
sync function.  
=
Using the beat sync function (p.31)  
J BEAT SYNC button  
Use this to turn on the beat sync function.  
=
Using the beat sync function (p.31)  
K TEMPO ±6/±10/±16/WIDE button  
Use this to switch the playing speed adjustment range.  
=
Adjusting the playing speed (Tempo control) (p.24)  
L MASTER TEMPO button  
Use this to turn the master tempo function on and off.  
=
Adjusting the playing speed without changing the pitch (Master  
Tempo) (p.24)  
M TEMPO slider  
Use this to adjust the track playing speed.  
=
Adjusting the playing speed (Tempo control) (p.24)  
N TEMPO RESET button and TEMPO RESET indicator  
Use this to play the track at the original playing speed as recorded on  
the disc, etc., regardless of the position of the TEMPO slider. When  
the TEMPO RESET button is turned on, the indicator lights.  
O Jog dial (–REV/+FWD) and jog ring illumination  
This can be used for such operations as scratching, pitch bending,  
etc.  
=
Operating the jog dial (p.25)  
P Jog dial display section  
=
Jog dial display section (p.21)  
18  
En  
Rear panel  
POWER  
CONTROL  
1
2
For the terminals used for connections, see Descriptions of terminals  
on page 12.  
1 POWER ON/OFF button  
Press to turn the power on and off.  
2 Kensington security slot  
Front panel  
1
2
3
1 Disc insertion slot  
2 Disc force eject pin insertion hole  
3 Disc insertion slot indicator  
About ejecting discs by force  
!
If the disc cannot be ejected by pressing the [DISC EJECTh] button, the disc can be forcibly ejected by inserting the disc force eject pin into the disc  
force eject pin insertion hole on the main unit’s front panel.  
!
When forcibly ejecting a disc, be sure to do so following the procedure below.  
1 Press the [POWER ON/OFF] button to turn this unit’s power off, then wait at least 1 minute.  
Never forcibly eject a disc directly after turning off the set’s power. Doing so is dangerous for the reasons described below.  
The disc will still be spinning when ejected and could hit your fingers, etc., causing injury.  
Also, the disc clamp will rotate in an unstable way, and the disc could get scratched.  
2 Use the included disc force eject pin. (Do not use anything else.)  
The included disc force eject pin is mounted on this unit’s bottom panel. When the pin is inserted all the way into the insertion hole, the disc is ejected  
5 mm to 10 mm out of the disc insertion slot. Grasp the disc with your fingers and pull it out.  
En  
19  
Main unit display  
Normal playback screen  
8
9
a
b
c
d
7
e
f
g
6
5
4
3
2
h
i
j
1
m
l
k
1 CUE  
d NEEDLE  
The positions of cue points, loop points and hot cues are displayed  
as marks.  
This lights when needle searching is possible.  
e Time display (minutes, seconds and frames)  
2 MEMORY  
There are 75 frames to a second.  
Cue points, loop points and hot cues stored on storage devices (SD,  
USB) are displayed as marks.  
f QUANTIZE  
This is displayed when [QUANTIZE] is on.  
3 A. CUE  
g MT  
This lights when auto cue is set.  
This lights when the master tempo is set.  
=
Setting auto cue (p.26)  
=
Adjusting the playing speed without changing the pitch (Master  
4 PLAYER  
Tempo) (p.24)  
This indicates the player number (1 – 4) assigned to this unit.  
h BPM  
5 TRACK  
Displays BPM (Beats Per Minute) of the track currently being played.  
This indicates the track number (01 – 99).  
!
The BPM measured by this unit may differ from the BPM indi-  
cated on the disc or that of a Pioneer DJ mixer, etc. This is due to  
the different methods used for measuring the BPM, and is not a  
malfunction.  
6 REMAIN  
This lights when the time display is set to the remaining time.  
7 Information display section  
i Playing speed display  
The enlarged waveform analyzed with rekordbox, etc., is displayed  
here.  
The value changes according to the position of the [TEMPO] slider.  
j Playing speed adjustment range display  
8 Track name  
This indicates the range in which the playing speed can be adjusted  
with respect to the original playing speed recorded on the medium.  
9 PHASE METER  
This indicates the amount of divergence of the bars and beats with  
the master player when using the beat sync function.  
k WAVE display  
This displays the WAVE display, guidance, etc.  
a BEAT COUNTDOWN  
l Playing address display/scale display (1-minute  
intervals)  
This indicates the number of bars or beats from the currently playing  
position to the nearest stored cue point.  
The track is displayed as a bar graph. The current playback posi-  
tion is displayed as a white vertical line. When the elapsed time is  
displayed, the left edge of the graph lights. When the remaining time  
is displayed, the display turns off from the left side. The entire graph  
flashes slowly when there are less than 30 seconds remaining in  
the track, then begins flashing rapidly when less than 15 seconds  
remain.  
b KEY  
Indicates the track’s key.  
c ZOOM and GRID ADJUST mode display  
When the rotary selector is pressed for over 1 second, the mode  
switches between the [ZOOM] mode and the [GRID ADJUST] mode.  
!
[ZOOM] mode: When the rotary selector is turned, the waveform  
is enlarged or reduced in 5 steps.  
m Cache meter  
This indicates how much of the currently playing track is cached in  
the memory.  
!
[GRID ADJUST] mode: When the rotary selector is turned, the  
beat grid is adjusted.  
The beat grid can be adjusted using the [MENU/UTILITY] button.  
[reset]: Resets the adjusted beat grid.  
[snap grid (CUE)]: Moves the first beat to the position of the  
currently set cue.  
[SHIFT GRID]: Reflects the results adjusted during synchroni-  
zation (pitch bend, etc.) on the beat grid.  
20  
En  
Jog dial display section  
1
2
3
4
5
1 Operation display  
This indicates the playing position, with one revolution equal to 135  
frames. It turns during playback and stops in the pause mode.  
2 Cue point display/slip play display  
3 Audio memory status display  
This flashes when the audio memory is being written. It stops flash-  
ing, remaining lit, when writing is completed.  
It may not be possible to perform the real time cue operation while  
the audio memory is being written.  
The display also flashes when there is not enough memory due to  
scratch play.  
4 Jog touch detection display  
When the jog mode is set to VINYL, the top of the jog dial lights when  
pressed.  
5 VINYL  
This lights when the jog mode is set to VINYL.  
=
Operating the jog dial (p.25)  
En  
21  
Pioneer DJ player is connected, the number of discs stored in the  
disc information memory is displayed for several seconds on the  
main unit display.  
Basic Operation  
=
For details on storing disc information, see Procedure for calling  
out hot cues (for discs) on page 28.  
Turning the power on  
Ejecting discs  
1 Make all the connections, then plug the power cord  
into a power outlet.  
1 Press the [DISC EJECTh] button to eject the disc.  
The disc is ejected from the disc insertion slot.  
=
Connections (p.12)  
E
R
E
V
2 Press the [POWER ON/OFF] button.  
This unit’s indicators light and the power turns on.  
T
E
F
R
M
W
E
P
T
S
D
O
E
0
Turning the power off  
T
E
Press the [POWER ON/OFF] button.  
This unit’s power turns off.  
M
P
O
!
Do not pull out the SD memory card or turn off this unit’s power  
while the SD memory card indicator is flashing. Doing so could  
delete this unit’s management data and damage the SD memory  
card, making it impossible to read.  
!
Do not disconnect the USB device or turn off this unit’s power while  
the USB indicator is lit or flashing. Doing so could delete this unit’s  
management data and damage the USB device, making it impos-  
sible to read.  
2 Pull the disc out, being careful not scratch its signal  
surface.  
R
E
V
Loading and ejecting discs  
!
!
This unit is a one-disc player. Do not insert multiple disc.  
Do not force discs into the disc insertion slot when this unit’s power  
is off. Doing so could damage the disc and lead to malfunction of  
this unit.  
When the disc is being drawn in or ejected, do not apply any force  
to the disc in the direction opposite its movement. Doing so could  
damage the disc or this unit.  
T
E
F
R
M
W
E
P
T
S
D
O
E
0
T
E
M
P
!
O
Inserting discs  
1 Press the [POWER ON/OFF] button to turn on this  
unit’s power.  
!
!
If the [DISC EJECTh] button is pressed accidentally, press the  
[PLAY/PAUSEf] button immediately. Disc ejection is canceled  
and the unit is reset to as it was directly before the [DISC EJECTh]  
button was pressed. (No sound is output during the resetting  
process.)  
When [EJECT/LOAD LOCK] on the [UTILITY] menu is set to [LOCK],  
discs cannot be ejected during playback. Either set [EJECT/LOAD  
LOCK] to [UNLOCK] or press the [PLAY/PAUSEf] button to  
pause playback, then press the [DISC EJECTh] button.  
2 Insert the disc horizontally into the disc insertion slot,  
with the printed surface facing up.  
Playback starts after the medium’s information has been read.  
!
When a disc containing music files recorded with a hierarchical  
structure is loaded, playback starts from the tracks in the uppermost  
layer.  
R
E
V
About the resume function  
If a disc is ejected during playback, when that same disc is reloaded,  
playback resumes from the point playing when the disc was ejected. If  
a disc is ejected while pausing, when that disc is reloaded, it pauses at  
the same point as when it was ejected. These points are stored in the  
memory until this unit’s power is turned off or a different disc is loaded.  
T
E
F
R
M
W
E
P
T
S
D
O
E
0
T
E
M
P
O
!
This function does not work with storage devices (SD, USB).  
Inserting and ejecting SD memory  
cards  
!
Do not insert any objects other than SD memory cards into the SD  
memory card insertion slot. Inserting coins or other metal objects  
could damage the internal circuitry, resulting in malfunction.  
Do not forcibly insert or remove SD memory cards. Doing so could  
damage the SD memory card or this unit.  
!
!
When auto cue is turned on, the disc pauses at the audio start posi-  
tion. In this case, press the [PLAY/PAUSEf] to start playback.  
=
For details on auto cue, see Setting auto cue on page 26.  
!
When a disc is inserted while a storage device (SD, USB) that has  
previously been inserted into or connected to this unit or another  
22  
En  
=
Connecting USB devices (p.23)  
Inserting SD memory cards  
2 Press the corresponding medium button ([DISC], [SD]  
or [USB]).  
1 Press the [POWER ON/OFF] button to turn on this  
unit’s power.  
The tracks or folders are displayed on a list.  
The medium whose contents are displayed on the main unit display can  
be switched.  
2 Open the SD memory card door.  
[DISC] button: Displays the contents on the inserted disc.  
[SD] button: Displays the contents on the inserted SD memory card.  
[USB] button: Displays the contents of the connected USB or mobile  
device.  
3 Insert the SD memory card.  
Insert the SD memory card vertically, with the back side facing forward  
and the notch facing down. Push the card in slowly until it stops.  
=
For details on the [LINK] button, see Playing storage devices (SD,  
USB) of other players and mobile devices on which rekordbox is  
installed on page 23.  
4 Close the SD memory card door.  
=
For details on the [rekordbox] button, see Playing the rekordbox  
library on a computer or mobile device on page 24.  
Ejecting SD memory cards  
!
If the storage device (SD, USB) contains rekordbox library informa-  
tion, the rekordbox library is displayed.  
1 Open the SD memory card door.  
The SD memory card indicator flashes for several seconds, then turns  
off.  
=
For details on rekordbox library browsing, see Playing the rekord-  
box library on a computer or mobile device on page 24.  
!
Do not pull out the SD memory card or turn off this unit’s power  
while the SD memory card indicator is flashing. Doing so could  
delete this unit’s management data and damage the SD memory  
card, making it impossible to read.  
3 Turn the rotary selector.  
Move the cursor and select the item.  
2 Press the SD memory card in. When it pops back up,  
pull it out vertically.  
3 Close the SD memory card door.  
!
!
Press the rotary selector to move to a lower level in the folder. Press  
the [BACK] button to return to the level above.  
When the [BACK] button is pressed for over 1 second or the medium  
button for the medium being browsed is pressed, the display moves  
to the topmost level.  
Connecting and disconnecting USB  
devices  
!
Tracks in the currently playing track’s category/folder of can also be  
selected using the [TRACK SEARCH o, p] buttons.  
Connecting USB devices  
4 Select the track and press the rotary selector.  
When the track is loaded, the screen switches to the normal playback  
screen.  
The track is loaded, playback starts, and the corresponding medium  
button flashes.  
1 Press the [POWER ON/OFF] button to turn on this  
unit’s power.  
2 Connect the USB device to the USB device insertion  
slot.  
=
For details on the normal playback screen, see Main unit display  
on page 20.  
!
When [EJECT/LOAD LOCK] on the [UTILITY] menu is set to [LOCK],  
it is not possible to load other tracks during playback. Either set  
[EJECT/LOAD LOCK] to [UNLOCK] or press the [PLAY/PAUSEf]  
button to pause, then load the track.  
Disconnecting USB devices  
!
!
When a track has been loaded while pausing, press the  
[PLAY/PAUSEf] button to start playback.  
When auto cue is turned on, the disc pauses at the audio start posi-  
tion. In this case, press the [PLAY/PAUSEf] to start playback.  
1 Press the [USB STOP] button until the USB indicator  
turns off.  
Do not disconnect the USB device or turn off this unit’s power while the  
USB indicator is lit or flashing. Doing so could delete this unit’s manage-  
ment data and damage the USB device, making it impossible to read.  
=
For details on auto cue, see Setting auto cue on page 26.  
2 Disconnect the USB device.  
Playing storage devices (SD, USB) of  
other players and mobile devices on  
which rekordbox is installed  
Display the contents of the storage device (SD, USB) or of the mobile  
device on which rekordbox is installed that is connected to the other  
player connected to this unit by PRO DJ LINK on this unit’s screen.  
Playback  
This section describes basic track selection operations and how to  
switch the screen.  
=
=
Playing storage devices (SD, USB) of other players and mobile devices  
on which rekordbox is installed (p.23)  
Playing the rekordbox library on a computer or mobile device (p.24)  
!
The information of discs inserted on other players cannot be  
browsed.  
1 Connect the storage device (SD, USB) or mobile device  
on which rekordbox is installed to the other player  
connected to this unit by PRO DJ LINK.  
Playing media connected to or inserted in  
this unit  
2 Press the [LINK] button.  
The tracks and/or folders on the storage device (SD, USB) or mobile  
device on which rekordbox is installed that is connected to the other  
player are displayed.  
1 Load the medium in this unit.  
=
=
Inserting discs (p.22)  
Inserting SD memory cards (p.23)  
En  
23  
!
!
When multiple media are connected, a screen for selecting the  
medium appears.  
If the storage device (SD, USB) contains rekordbox library informa-  
tion, the rekordbox library is displayed.  
3 Turn the rotary selector to select the track, then press  
the rotary selector to set playback.  
!
The display of the track names is canceled by pressing the [MENU]  
or [BACK] button.  
=
For details on rekordbox library browsing, see Playing the rekord-  
box library on a computer or mobile device on page 24.  
Pausing  
3 Turn the rotary selector.  
Move the cursor and select the item.  
During playback, press the [PLAY/PAUSE f] button.  
The [PLAY/PAUSEf] and [CUE] buttons flash. When the  
[PLAY/PAUSEf] button is pressed again, playback resumes.  
!
When tracks have been loaded from a disc, the disc automatically  
stops spinning if no operation is performed for 100 minutes while in  
the pause mode.  
4 Select the track and press the rotary selector.  
When the track is loaded, the screen switches to the normal playback  
screen.  
The track is loaded, playback starts, and the corresponding medium  
button flashes.  
Forward and reverse scanning  
Press one of the [SEARCH m, n] buttons.  
The track is scanned in the forward or reverse direction while one of the  
[SEARCH m, n] buttons is pressed.  
=
For details on the normal playback screen, see Main unit display  
!
It is not possible to move to a different category or folder during  
forward or reverse scanning.  
on page 20.  
If the medium contains the rekordbox library  
If the SD memory card or USB device inserted into/connected to this  
unit or another player connected by PRO DJ LINK contains rekordbox  
library information, the rekordbox library is displayed.  
Finding the beginnings of tracks (Track  
Search)  
!
Music files are displayed in the categories (album, artist, etc.) set  
with rekordbox.  
The types of items on the category menu can be changed in rekord-  
box’s preferences.  
Press one of the [TRACK SEARCH o, p] buttons.  
Press the [p] to move to the beginning of the next track.  
When [o] is pressed, playback returns to the beginning of the cur-  
rently playing track. When pressed twice in a row, playback returns to  
the beginning of the previous track.  
!
!
It is not possible to move to a different category or folder with the  
track search function.  
Playing the rekordbox library on a  
computer or mobile device  
Music files are displayed in the categories (album, artist, etc.) set with  
rekordbox.  
Adjusting the playing speed (Tempo  
control)  
1 Press the [rekordbox] button.  
The rekordbox library is displayed on this unit’s main unit display.  
Press the [TEMPO ±6/±10/±16/WIDE] button.  
The [TEMPO] slider’s adjustment range switches each time the button  
is pressed. The adjustment range setting is indicated on the main unit  
display.  
!
With wireless LAN (Wi-Fi) connections, if [Please push the rotary  
selector to permit mobile connection.] appears on this unit’s main  
unit display when connecting, connection is possible by pressing the  
rotary selector.  
Setting value  
Units of adjustment  
!
To select a mobile device connected by USB, press the [USB] button.  
Also, to select a mobile device connected to another player that is  
connected by PRO DJ LINK, press the [LINK] button.  
±6  
0.02 %  
0.05 %  
0.05 %  
0.5 %  
±10  
±16  
WIDE  
2 Turn the rotary selector.  
Move the cursor and select the item.  
The [WIDE] adjustment range is ±100 %. When set to –100 %, playback  
stops.  
3 Select the track and press the rotary selector.  
When the track is loaded, the screen switches to the normal playback  
screen.  
!
The adjustment range is set to ±10 % when the power is turned on.  
The track is loaded, playback starts, and the corresponding medium  
button flashes.  
Move the [TEMPO] slider forward or backward.  
The tempo increases when moved to the [+] side (down), decreases  
when moved to the [–] side (up). The rate at which the playing speed is  
changed is indicated on the playing speed display.  
=
For details on the normal playback screen, see Main unit display  
on page 20.  
Load previous tracks  
The names of the last five tracks that were played are displayed and can  
be selected.  
Adjusting the playing speed without  
changing the pitch (Master Tempo)  
Press the [MASTER TEMPO] button.  
The [MASTER TEMPO] button and [MT] indicator on the main unit  
display light.  
1 Display the normal playback screen.  
2 Press the [MENU/UTILITY] button.  
Move the [TEMPO] slider forward or backward.  
The pitch does not change even when the playing speed is changed with  
the [TEMPO] slider.  
!
The sound is digitally processed, so the sound quality decreases.  
24  
En  
3 Spin the jog dial in the desired direction and at the  
Playing in reverse  
desired speed.  
The sound is played according to the direction and speed at which the  
jog dial is spun by spinning the top of the jog dial while pressing it.  
!
When the quantize function is on, there may be a slight delay in  
operation of this function in order to synchronize the beat.  
4 Release your hand from the top of the jog dial.  
Normal playback resumes.  
Move the [DIRECTION FWD/REV] lever to the [REV] side.  
The [REV] indicator lights and the track is played in the reverse direction.  
!
When the music files are recorded in a folder structure, only tracks  
within the same category/folder can be played in reverse. Also note  
that reverse playback may not start immediately.  
Frame search  
!
!
The direction in which the playing speed is increased or decreased  
according to the direction in which the jog dial is turned is reversed.  
When such operations as track searching and loop playback are  
performed during reverse playback, the audio memory status display  
on the jog dial display section flashes and scratch play may not be  
possible.  
In the pause mode, spin the jog dial.  
The position at which the track is pausing can be moved in units of 0.5  
frames.  
!
The position is moved in the direction of playback when the jog dial  
is spun clockwise, in the reverse direction when it is spun counter-  
clockwise. The position moves 135 for one revolution of the jog dial.  
Operating the jog dial  
Super fast search  
!
The top of the jog dial has an embedded switch. Do not place objects  
on the jog dial or subject it to strong forces.  
!
Water or other liquids getting into the set will lead to malfunction.  
Turn the jog dial while pressing one of the [SEARCH m,  
n] buttons.  
The track is fast-forwarded/fast-reversed in the direction in which the jog  
dial is spun.  
Switching the jog dial mode  
!
When the [SEARCH m, n] button is released, this function is  
canceled.  
Press the [JOG MODE] button.  
The mode switches between VINYL and CDJ each time the button is  
pressed.  
!
!
When you stop the jog dial from spinning, normal playback resumes.  
The fast-forward/fast-reverse speed can be adjusted according to the  
speed at which the jog dial is spun.  
!
VINYL mode: When the top of the jog dial is pressed during play-  
back, playback stops, and when the jog dial is spun at this time  
sound is produced according to the direction in which the jog  
dial is spun.  
Super fast track search  
!
CDJ mode: Playback does not stop even when the top of the  
jog dial is pressed. Such operations as scratching cannot be  
performed.  
Turn the jog dial while pressing one of the  
[TRACK SEARCH o, p] buttons.  
The track is advanced at high speed in the direction in which the jog dial  
was turned.  
Pitch bend  
During playback, spin the outer section of the jog dial  
without touching the top.  
The playing speed increases when spun clockwise, decreases when  
spun counterclockwise. When spinning is stopped, playback returns to  
the normal speed.  
Adjusting the playback and  
stopping speeds  
!
When the jog mode is set to the CDJ mode, the same operation can  
be performed by spinning the top of the jog dial.  
Adjusting the speed at which playback  
stops  
The speed at which playback stops when the top of the jog dial is  
pressed or when playback is stopped by pressing the [PLAY/PAUSEf]  
button can be changed.  
Adjusting the load when the jog dial is  
spun  
!
This function is only valid when the jog mode is set to the VINYL  
mode.  
Turn the [JOG ADJUST] control.  
The load gets heavier when turned clockwise, lighter when turned  
counterclockwise.  
Turn the [VINYL SPEED ADJUST TOUCH/BRAKE] control.  
The speed increases when turned clockwise, decreases when turned  
counterclockwise.  
Scratch  
Adjusting the speed at which the normal  
playing speed is reached  
The speed at which the normal playing speed is reached when the top  
of the jog dial is released or when the [PLAY/PAUSEf] button is  
pressed while pausing can be changed.  
When the jog mode is set to the VINYL mode, tracks can be played  
according to the direction and speed at which the jog dial is spun by  
spinning the top of the jog dial while pressing it.  
1 Press the [JOG MODE] button.  
Set the jog mode to VINYL.  
!
This function is only valid when the jog mode is set to the VINYL  
mode.  
2 During playback, press the top of the jog dial.  
Playback slows then stops.  
Turn the [VINYL SPEED ADJUST RELEASE/START] control.  
The speed increases when turned clockwise, decreases when turned  
counterclockwise.  
En  
25  
!
The auto cue level setting remains in the memory, even when the  
power is turned off.  
Advanced Operation  
Setting Loop  
This function can be used to play specific sections repeatedly.  
Setting Cue  
!
Loops that include sections in different tracks can only be set for  
tracks recorded on music CDs (CD-DA).  
1 During playback, press the [PLAY/PAUSE f] button.  
Playback is paused.  
!
When the quantize function is on, there may be a slight delay in  
operation of this function in order to synchronize the beat.  
(Reloop and auto beat loop only)  
2 Press the [CUE] button.  
The point at which the track is paused is set as the cue point.  
The [PLAY/PAUSEf] indicator flashes and the [CUE] indicator lights.  
No sound is output at this time.  
1 During playback, press the [IN/4BEAT (IN ADJUST)]  
button at the point at which you want to start loop  
playback (the loop in point).  
Loop In Point is set.  
!
When a new cue point is set, the previously set cue point is canceled.  
!
This operation is not necessary if you want to set the currently set  
cue point as the loop in point.  
Adjusting the cue point position  
2 Press the [LOOP OUT (OUT ADJUST)] button at the  
point at which you want to end loop playback (the loop  
out point).  
The loop out point is set, and loop playback begins.  
1 Press the [SEARCH m, n] buttons while pausing at  
the cue point.  
The [PLAY/PAUSEf] and [CUE] indicators flash.  
2 Press one of the [SEARCH m, n] buttons.  
The cue point can be fine-adjusted in steps of 0.5 frames.  
Fine-adjusting the loop in point (loop in  
adjust)  
!
The same operation is possible using the jog dial.  
3 Press the [CUE] button.  
The position at which the button was pressed is set as the new cue point.  
1 During loop playback, press the [IN/4BEAT  
!
When a new cue point is set, the previously set cue point is canceled.  
(IN ADJUST)] button.  
The [IN/4BEAT (IN ADJUST)] button starts flashing rapidly, and the  
[LOOP OUT (OUT ADJUST)] button turns off.  
Returning to Cue Point (Back Cue)  
The loop in point’s time is displayed on the main unit display.  
2 Press one of the [SEARCH m, n] buttons.  
During playback, press the [CUE] button.  
The loop in point can be adjusted in units of 0.5 frames.  
The set immediately returns to the currently set cue point and pauses.  
!
!
!
The same operation is possible using the jog dial.  
The loop in point’s range of adjustment is ± 30 frames.  
The loop in point cannot be set at a point beyond the loop out point.  
!
When the [PLAY/PAUSE f] button is pressed, playback starts  
from the cue point.  
3 Press the [IN/4BEAT (IN ADJUST)] button.  
Checking Cue Point (Cue Point Sampler)  
Loop playback resumes.  
!
Normal loop playback also resumes if no operation is performed for  
over 10 seconds.  
Keep pressing the [CUE] button after returning to the  
cue point.  
Playback starts from the set cue point. Playback continues while the  
[CUE] button is pressed.  
Fine-adjusting the loop out point (loop  
out adjust)  
!
If the [PLAY/PAUSE f] button is pressed while sampling the cue,  
playback continues even if the [CUE] button is released.  
1 During loop playback, press the [LOOP OUT  
(OUT ADJUST)] button.  
Setting Cue Point during playback (Real  
Time Cue)  
The [LOOP OUT (OUT ADJUST)] button starts flashing rapidly, and the  
[IN/4BEAT (IN ADJUST)] button turns off.  
The loop out point’s time is displayed on the main unit display.  
During playback, press the [IN/4BEAT (IN ADJUST)]  
button at the point at which you want to set the cue  
2 Press one of the [SEARCH m, n] buttons.  
The loop out point can be adjusted in units of 0.5 frames.  
point.  
!
!
The same operation is possible using the jog dial.  
The loop out point cannot be set at a point before the loop in point.  
The point at which the button was pressed is set as the cue point.  
3 Press the [LOOP OUT (OUT ADJUST)] button.  
Loop playback resumes.  
Setting auto cue  
When a track is loaded or the track search operation is performed, the  
silent section at the beginning of the track is skipped and the cue point  
is automatically set at the point immediately before the sound starts.  
!
Normal loop playback also resumes if no operation is performed for  
over 10 seconds.  
Canceling Loop playback (Loop Exit)  
Press the [TIME MODE/AUTO CUE] button for over 1  
second.  
During loop playback, press the [RELOOP/EXIT] button.  
Playback continues beyond the Loop Out Point without returning to the  
Loop In Point.  
[A. CUE] lights.  
!
When [TIME MODE (AUTO CUE)] is pressed again for at least 1  
second, auto cue is set to off.  
26  
En  
Returning to Loop playback (Reloop)  
Using active loops  
After canceling loop playback, press the [RELOOP/EXIT]  
1 Connect a storage device (SD, USB) to this unit.  
2 Load a track for which an active loop has been set  
button during playback.  
Playback returns to the previously set Loop In Point, and Loop playback  
resumes.  
with rekordbox.  
One loop stored in rekordbox can be set as the active loop.  
The set active loop points are indicated on the waveform display as  
shown below.  
Setting loops automatically (4-beat Loop)  
During playback, press the [IN/4BEAT (IN ADJUST)]  
button for over 1 second.  
A loop of 4 beats starting from the point at which the button was pressed  
is set automatically according to the BPM of the currently playing track,  
and loop playback starts.  
When the set point is reached, the loop is set automatically and loop  
playback begins.  
!
If the track’s BPM cannot be detected, the BPM is set to 130.  
Emergency loops  
Cutting loops (Loop Cut)  
With this unit, a 4-beat loop is set automatically to prevent the sound  
from being interrupted if a track can no longer continue to play.  
During loop playback, press the [CUE/LOOPCALLc  
!
DJ playback is restricted during emergency looping. To cancel emer-  
gency looping, load the next track.  
(LOOP 1/2X)] button.  
The loop playing time is cut in half each time the button is pressed.  
Extending loops (loop doubling)  
Setting Hot Cue  
When a hot cue is set, that point can be called out and played instanta-  
neously. Up to 3 hot cues can be set per music track.  
During loop playback, press the  
[CUE/LOOPCALLd(LOOP 2X)] button.  
The loop’s length is doubled each time the button is pressed.  
!
When the quantize function is on, there may be a slight delay in  
operation of this function in order to synchronize the beat.  
1 Connect a storage device (SD, USB) to this unit.  
Setting the loop automatically based on  
the track’s tempo (Auto Beat Loop)  
2 Press the [HOT CUE] (REC/CALL) button.  
The mode switches to the hot cue recording mode. [HOT CUE] (A, B and  
C) buttons light red.  
A loop with the specified number of beats is set and loop playback starts.  
3 During playback or in the pause mode, press  
[HOT CUE] (A, B or C) at the point at which you want to  
set the hot cue.  
The point at which the button was pressed is set as the hot cue, and  
[HOT CUE] (A, B, C and REC/CALL) buttons flash.  
1 During playback, press the [LOOP MODE] button.  
The beat number selection screen appears on the main unit display.  
!
The beat select screen is also displayed when loops are set and  
when the slip function is turned on.  
!
During loop playback, the loop is registered as a hot cue.  
The direction of playback is not recorded for hot cues.  
While the hot cue is being recorded, it is not possible to record other  
hot cues, to set cue points, to scan in the forward or reverse direction  
or to scratch.  
2 Touch the [NEEDLE SEARCH] pad at the position  
corresponding to the number of beats you want to set.  
!
!
When a storage device (SD, USB) is connected to this unit, the point  
information is automatically stored on it.  
When a hot cue is set during scratch play, playback may stop  
temporarily.  
Playing hot cues  
The marker below the number of beats at the touched position lights red,  
and loop playback with the selected number of beats begins.  
1 Press the [HOT CUE] (REC/CALL) button.  
The hot cue playing mode is set.  
Button color  
3 Press the [LOOP MODE] button.  
The beat number selection screen turns off.  
Contents recorded as hot cue  
when lit  
!
If the [LOOP MODE] button is pressed again while the beat number  
selection screen is displayed, the beat number selection screen  
turns off.  
The beat select screen also turns off when a track is loaded.  
When a track that has not been analyzed is playing, the loop is set  
according to the track’s BPM.  
Green  
Orange  
Not lit  
Cue Point  
Loop  
Nothing is recorded.  
!
!
2 During playback or in the pause mode, press  
!
If the track’s BPM cannot be detected, the BPM is set to 130.  
[HOT CUE] (A, B or C).  
The hot cue recorded at that button is called out and playback begins.  
!
Loop playback recorded at [HOT CUE] buttons differs in informa-  
tion from loop playback set using the [IN/4BEAT (IN ADJUST)] or  
[LOOP OUT (OUT ADJUST)] buttons.  
En  
27  
!
After calling out a loop stored at a [HOT CUE] button, loop playback  
can be canceled using the [RELOOP/EXIT] button and the loop in  
and out points can be fine-adjusted using the [LOOP IN(IN ADJUST)]  
and [LOOP OUT(OUT ADJUST)] buttons. The adjustment directly  
changes the information stored at the [HOT CUE] (A, B or C) button.  
Storing cue or loop points  
1 Connect a storage device (SD, USB) to this unit.  
2 Set Cue Point or Loop Point.  
Calling out hot cues  
3 Press the [MEMORY] button.  
[
MEMORY] or [  
MEMORY] is displayed for several seconds  
Procedure for calling out hot cues (for discs)  
on the main unit display, and the point information is stored on the stor-  
age device (SD, USB).  
Stored cue and loop points are indicated [b] at the top of the waveform  
display.  
To call out hot cues using storage devices (SD, USB), the disc’s hot cues  
must first be stored using the storage device (SD, USB).  
1 Connect the storage device (SD, USB) on which the  
disc’s hot cues are stored.  
2 Load a disc in this unit.  
!
!
When a track recorded on a disc is playing, if both an SD memory  
card and a USB device are connected, the point information is stored  
with priority on the SD memory card.  
The storage device can be selected using the [MENU] button.  
Devices connected to other DJ players connected by PRO DJ LINK  
can also be selected.  
To store loop points, press the [MEMORY] button during loop  
playback. The stored loop points are shown on the playing address  
display.  
The unit switches to the hot cue call-out mode and the [HOT CUE] (A, B  
and C) buttons at which hot cues are recorded flash.  
3 Press the [HOT CUE] button (A, B or C) whose hot cue  
you want to call out.  
The hot cue is called out, and the [HOT CUE] (A, B, C) button lights  
green or orange.  
!
!
!
If you do not want to call out a hot cue, press the [HOT CUE]  
(REC/CALL) button without pressing one of the [HOT CUE] (A, B or  
C) buttons. Buttons whose hot cues were not called out turn off.  
When playing tracks recorded on media other than discs, hot  
cues cannot be called out even when a disc for which hot cues are  
recorded is loaded in the this unit.  
Calling out stored cue or loop points  
1 Connect a storage device (SD, USB) to this unit.  
If the hot cue call-out mode is cancelled accidentally, disconnect the  
storage device (SD, USB), then reconnect it.  
2 Load the track whose cue or loop points you want to  
call out.  
Call-out procedure (storage device (SD, USB))  
Stored cue and loop points are indicated [b] at the top of the waveform  
display.  
1 Connect a storage device (SD, USB) to this unit.  
2 Load the track whose hot cue you want to call out.  
3 Press the [HOT CUE] (REC/CALL) button for over 1  
3 Press the [CUE/LOOP CALL c(LOOP 1/2X)] or  
[CUE/LOOP CALL d(LOOP 2X)] button.  
Press [CUE/LOOP CALLc(LOOP 1/2X)] to call out a point before the cur-  
rently playing position, [CUE/LOOP CALLd(LOOP 2X)] to call out a point  
after the currently playing position.  
second.  
The unit switches to the hot cue call-out mode and the HOT CUE buttons  
(A, B and C) at which hot cues are recorded flash.  
The track cues to the called out point and pauses.  
!
When multiple points are stored, a different point is called out  
each time the button is pressed.  
4 Press the [HOT CUE] button (A, B or C) whose hot cue  
!
Loops set as active loops can also be called out as stored loops.  
you want to call out.  
The hot cue is called out, and the [HOT CUE] (A, B, C) button lights  
green or orange.  
4 Press the [PLAY/PAUSE f] button.  
Normal or loop playback starts from the point that was called out.  
!
If you do not want to call out a hot cue, press the [HOT CUE]  
(REC/CALL) button without pressing one of the [HOT CUE] (A, B or  
C) buttons. Buttons whose hot cues were not called out turn off.  
If the hot cue call-out mode is cancelled accidentally, press the  
[HOT CUE] (REC/CALL) button again for more than 1 second.  
rekordbox can be preset so that hot cues are called out automatically  
when tracks are loaded.  
Deleting stored cue or loop points  
!
!
Deleting points individually  
!
” is displayed on the track list for tracks for which auto hot cue  
1 Connect a storage device (SD, USB) to this unit.  
loading is set.  
2 Load the track containing the cue point or loop points  
you want to delete.  
Stored cue and loop points are indicated [b] at the top of the waveform  
Canceling the hot cue call out mode  
Perform one of the operations below to cancel the hot cue call out mode.  
When tracks have been loaded from a disc, the hot cue call-out mode is  
not canceled even if the track being played is changed.  
display.  
3 Press the [CUE/LOOP CALL c(LOOP 1/2X)] or  
[CUE/LOOP CALL d(LOOP 2X)] button to call out the  
point to be deleted.  
The track cues to the called out point and pauses.  
1 Calling out hot cues A, B and C.  
2 Press the [HOT CUE] (REC/CALL) button.  
!
When multiple points are stored, a different point is called out each  
time the button is pressed.  
3 Change the track to be played on the storage device  
(SD, USB).  
28  
En  
4 Press the [DELETE] button.  
3 Turn the rotary selector then press it.  
Select the acoustic pressure level or [MEMORY].  
[
DELETE] or [  
DELETE] is displayed on the main unit display,  
and the selected point information is deleted.  
!
When a stored loop set as an active loop is deleted, the active loop is  
also deleted.  
Using the [TIME MODE (AUTO CUE)] button  
1 Press the [TIME MODE/AUTO CUE] button for over 5  
second.  
Deleting points in units of discs  
The currently set value is displayed on the main unit display.  
2 Press the [CUE/LOOP CALL c(LOOP 1/2X)] or  
[CUE/LOOP CALL d(LOOP 2X)] button.  
Select the acoustic pressure level or [MEMORY].  
1 Load a disc in this unit.  
When tracks from a medium other than a disc are loaded, load any track  
from the disc.  
2 Connect a storage device (SD, USB) to this unit.  
The cue or loop in point is displayed on the playing address display with  
a mark.  
Using the slip mode  
When the slip mode is turned on, normal playback with the original  
rhythm continues in the background while in the pause (vinyl mode),  
scratch play, loop play, hot cue play and reverse play modes. When the  
slip mode is canceled, normal playback resumes from the point reached  
while the slip mode was turned on.  
3 Press the [DELETE] button for over 5 second.  
[DISC CUE/LOOP DATA-DELETE? PUSH MEMORY] appears on the  
main unit display.  
4 Press the [MEMORY] button.  
All cue and loop points for the disc currently loaded in this unit are  
deleted.  
!
When the quantize function is on, there may be a slight delay in  
operation of this function in order to synchronize the beat.  
(Slip beat loop, slip reverse and slip hot cue only)  
!
The delete mode is canceled if any button other than [MEMORY] is  
pressed.  
Display of the position playing in the background  
Deleting all the disc information stored  
on a storage device (SD, USB)  
Connect the storage device (SD, USB) on which the disc information is  
stored to this unit.  
1 With no disc loaded on this unit, press the [DELETE]  
button for over 5 seconds.  
[DISC CUE/LOOP DATA-DELETE ALL? PUSH MEMORY] appears on the  
main unit display.  
2 Press the [MEMORY] button.  
All the disc information stored on the storage device (SD, USB) is  
deleted.  
!
!
When in the slip mode, the currently playing position is indicated  
by a yellow line on the main unit display’s waveform display (overall  
waveform or enlarged waveform). The position playing in the back-  
ground is indicated by a white line on the main unit display’s wave-  
form display (overall waveform).  
!
The delete mode is canceled if any button other than [MEMORY] is  
pressed.  
It is also displayed on the jog dial’s slip play display.  
Setting the cue point for auto  
cueing  
Slip pausing  
The cue point to be set as the auto cue can be selected using one of the  
methods below.  
1 Press the [JOG MODE] button.  
Set the jog mode to VINYL.  
Setting the cue point by the acoustic pressure level  
identified as a silent section (8 levels)  
–36 dB, –42 dB, –48 dB, –54 dB, –60 dB, –66 dB, –72 dB and –78 dB  
2 Press the [SLIP] button.  
The mode switches to the slip mode.  
3 During playback, press the [PLAY/PAUSE f] button.  
Normal playback continues in the background even while in the pause  
mode.  
Automatically setting stored cues as cue points  
MEMORY: The stored cue point nearest the beginning of the track is set  
as the cue point for auto cueing.  
The [SLIP] button flashes in beat with the sound playing in the  
background.  
!
When [MEMORY] is set, [A. CUE] lights in white on the main unit  
display.  
4 Press the [PLAY/PAUSE f] button to cancel the  
The setting of the cue point for auto cueing can be changed using one of  
the methods below.  
pause mode.  
Normal playback of the sound that was playing in the background  
resumes.  
Using the [MENU (UTILITY)]button  
Slip scratching  
1 Press the [MENU/UTILITY] button for over 1 second.  
The [UTILITY] screen is displayed.  
1 Press the [JOG MODE] button.  
Set the jog mode to VINYL.  
2 Turn the rotary selector then press it.  
Select [AUTO CUE LEVEL].  
En  
29  
The [SLIP] button flashes in beat with the sound playing in the  
background.  
2 Press the [SLIP] button.  
The mode switches to the slip mode.  
!
At the position 8 beats past the position at which the [DIRECTION  
FWD REV] lever was moved to the REV side, the slip reverse mode is  
automatically canceled, normal playback of the sound playing in the  
background resumes and the [REV] indicator flashes.  
3 During playback, press the top of the jog dial.  
The scratch play mode is set.  
Normal playback continues in the background even while scratching.  
The [SLIP] button flashes in beat with the sound playing in the  
background.  
!
If the [DIRECTION FWD REV] lever is moved to the FWD side before  
8 beats have played, the slip reverse mode is canceled and normal  
playback of the sound that was playing in the background resumes.  
4 Release your hand from the top of the jog dial.  
Normal playback of the sound that was playing in the background  
resumes.  
Slip hot cue  
1 Press the [SLIP] button.  
The mode switches to the slip mode.  
Slip looping  
1 Press the [SLIP] button.  
2 Press and hold a [HOT CUE] (A, B, C, REC/CALL)  
button.  
Hot cueing begins.  
Normal playback continues in the background while the [HOT CUE] (A,  
B, C, REC/CALL) button is pressed.  
The [SLIP] button flashes in beat with the sound playing in the  
background.  
The mode switches to the slip mode.  
2 Press the [IN/4BEAT (IN ADJUST)] button, then press  
the [LOOP OUT (OUT ADJUST)] button.  
Loop playback starts.  
Normal playback continues in the background even during loop  
playback.  
The [SLIP] button flashes in beat with the sound playing in the  
background.  
!
At the point 4 beats after hot cueing began, the slip hot cue mode is  
automatically canceled and normal playback of the sound that was  
playing in the background resumes.  
!
!
Loops of over 8 seconds cannot be set.  
The same operation is performed when the [IN/4BEAT (IN ADJUST)]  
button is pressed for over 1 second and a loop is set.  
3 Release the [HOT CUE] (A, B, C, REC/CALL) button.  
When the [HOT CUE] (A, B, C, REC/CALL) button is released before 4  
beats have played since hot cueing began, normal playback of the sound  
that was playing in the background resumes.  
3 Press the [RELOOP/EXIT] button.  
Looping is canceled, and normal playback of the sound that was playing  
in the background resumes.  
Canceling the slip mode  
Slip beat looping  
Press the [SLIP] button.  
The slip mode is canceled.  
1 Press the [SLIP] button.  
The mode switches to the slip mode.  
!
The slip mode is also canceled when a track is loaded.  
2 Press and hold the selected beat on the  
[NEEDLE SEARCH] pad.  
The loop is set automatically and loop playback begins.  
Normal playback continues in the background even during loop  
playback.  
Playing from the point touched on  
the [NEEDLE SEARCH] pad  
Touch the [NEEDLE SEARCH] pad with a finger to easily play the sound  
at the position at which the pad is touched. Move your finger while  
touching the pad to quickly move to the desired position.  
The [SLIP] button flashes in beat with the sound playing in the  
background.  
The [NEEDLE SEARCH] pad can only be operated in the following cases:  
!
!
The beat select screen is displayed when the slip mode is turned on.  
A different beat can also be selected by sliding your finger on the  
[NEEDLE SEARCH] pad without releasing it.  
!
!
In the pause mode  
While the jog dial is being pressed with the jog mode set to VINYL  
In the pause mode, touch the [NEEDLE SEARCH] pad.  
3 Release your finger from the [NEEDLE SEARCH] pad.  
Normal playback of the sound that was playing in the background  
resumes.  
4 Press the [RELOOP/EXIT] button.  
The last loop that was set is played and the slip loop mode is set.  
!
If the slip beat loop was canceled after selecting a different beat  
without lifting your finger from the [NEEDLE SEARCH] pad, the loop  
called out with the [RELOOP/EXIT] button is the loop that was first  
set (during playback).  
Slip reverse  
The currently playing position on the playing address display moves to  
the point directly above the position that was touched.  
!
The playing position can be moved by sliding your finger along the  
pad. Note that the playing address display may not be displayed  
properly if your finger is moved quickly.  
1 Press the [SLIP] button.  
The mode switches to the slip mode.  
2 During playback, move the [DIRECTION FWD REV]  
lever to the REV side.  
The [REV] indicator lights and the track is played in the reverse direction.  
Normal playback continues in the background even during reverse  
playback.  
30  
En  
4 Move the DJ mixer’s channel fader or cross fader.  
This unit’s pause mode is canceled and the track is played  
instantaneously.  
Using the beat sync function  
When beat sync is turned on, the BPM and beat position of tracks played  
on this unit can automatically be synchronized with the DJ player con-  
nected by PRO DJ LINK that is set as the sync master.  
!
When the channel fader or cross fader is set back to its original posi-  
tion, playback cues back to the set cue point and the pause mode is  
set (Back Cue).  
!
The beat sync function does not operate for tracks that have not be  
analyzed with rekordbox.  
Relay play on two DJ players  
1 Press the [BEAT SYNC MASTER] button on the DJ  
player you want to set as the sync master.  
Set the DJ player you want to be the sync master.  
When the beat sync function is on, the BPM display on the DJ player set  
as the sync master changes to orange.  
1 Connect this unit and a DJ mixer.  
For instructions on connecting, see Connections for relay play on page  
15.  
!
rekordbox can also be set as the sync master.  
2 Set the DJ mixer’s cross fader to the center position.  
=
For instructions on setting rekordbox as the sync master, see the  
rekordbox (Mac/Windows) operating instructions.  
3 Turn auto cue on for both DJ players.  
The DJ players’ auto cue indicators light.  
2 Press the [BEAT SYNC] button.  
The BPM and beat position of the currently playing track are synchro-  
nized to the sync master.  
4 Start playback on this unit.  
The first track on this unit is played, and once it finished playback begins  
automatically on the other DJ player. This unit cues to the beginning  
of the next track and pauses. This operation is repeated for relay play  
between the two DJ players.  
!
During synchronization, tempo control with the tempo slider is  
disabled and the playing speed display switches to the tempo slider  
position’s BPM display, displayed in gray.  
!
Relay play may not be possible if the two DJ players are not con-  
nected to the same DJ mixer.  
Changing the DJ player set as the sync  
master  
!
If the power of one DJ player is turned off during playback, playback  
may start on the other DJ player.  
The sync master can be changed to another DJ player connected by  
PRO DJ LINK as described below.  
Browsing tracks  
The various devices and the rekordbox library on the connected com-  
!
!
Change or pause the track on the DJ player set as the sync master.  
Press the [BEAT SYNC MASTER] button on the DJ player set as the  
sync master.  
puter can be browsed to display a list of the tracks.  
!
Press the [BEAT SYNC MASTER] button on a DJ player other than  
the one set as the sync master.  
!
When a storage device (SD, USB) on which no rekordbox library  
information is stored is browsed, the folders and tracks (music files)  
are listed in a layer structure.  
Canceling synchronization  
Switching to the browse screen  
Press the [BEAT SYNC] button.  
!
If the synchronized playing tempo (BPM) and the slider position’s  
tempo (BPM) do not match, the synchronized playing tempo is main-  
tained and tempo control with the tempo slider remains disabled.  
Normal operation is restored when the position of the tempo slider is  
moved to the synchronized playing tempo position.  
Press the device button corresponding to the device you  
want to display.  
When a button is pressed, the contents of the corresponding source are  
displayed on a list.  
rekordbox  
Operating the CDJ-2000NXS in  
combination with other devices  
When connected by LAN cable with a Pioneer DJ mixer, such operations  
as starting playback on this unit can be controlled with the DJ mixer’s  
fader.  
LINK  
TAG TRACK  
LINK INFO  
INFO  
UTILITY  
MENU  
BACK  
/
REMOVE  
BROWSE  
TAG LIST  
5
V
1
A
rekordbox  
LINK  
OFF  
ON  
POWER  
STANDBY  
USB  
SD  
USB  
STOP  
DISC EJECT  
USB  
SD  
DISC  
SD  
HOT CUE  
QUANTIZE TIME MODE  
VINYL  
SPEED ADJUST  
DISC  
TOUCH/BRAKE  
AUTO CUE  
!
Connect this unit and the Pioneer DJ mixer ahead of time. For  
instructions on connections, see Connections on page 12.  
For details on player number settings, see PRO DJ LINK on page 3.  
Also refer to the description of the fader start function included in  
the Pioneer DJ mixer’s operating instructions.  
!
!
[DISC] button: Displays the contents on the inserted disc.  
[SD] button: Displays the contents on the inserted SD memory  
card.  
[USB] button: Displays the contents of the connected USB or  
mobile device.  
[LINK] button: Displays the contents on the storage device (SD,  
USB) or mobile device on which rekordbox is installed that is  
connected to another DJ player by PRO DJ LINK.  
[rekordbox] button: Displays rekordbox connected by PRO DJ  
LINK (LINK Export).  
!
!
!
!
Starting playback using a DJ mixer’s  
fader (Fader Start)  
!
!
!
When the browse screen is displayed, the [BROWSE] button lights.  
When the [BROWSE] button is pressed while the browse screen is  
displayed, the browse screen closes and the screen returns to the  
normal playback screen.  
1 Connect this unit with the Pioneer DJ mixer using a  
LAN cable.  
For instructions on connecting, see Basic style on page 12.  
!
If the Pioneer DJ mixer does not have a LAN port, connect a mini  
phone plug cable (Ø 3.5 mm) to the CONTROL terminal.  
When the [BROWSE] button is pressed again, the previous browse  
screen opens.  
2 Turn on the DJ mixer’s fader start function.  
3 Set cues on this unit.  
En  
31  
Description of the screen  
Moving back up to a higher layer  
1
2
3
4
5
Press the [BACK] button while the browser screen is  
displayed.  
The screen moves back to the layer above.  
!
When the [BACK] button is pressed for over 1 second or the medium  
button for the medium being browsed is pressed, the display moves  
to the topmost level.  
!
When playing the rekordbox library on a storage device (SD, USB),  
computer or mobile device, the information below can be displayed  
by pressing the [BACK] button at the topmost level.  
When there is no rekordbox library information on the storage  
device (SD, USB): The device’s free and used space  
When there is rekordbox library information on the storage  
device (SD, USB): The device’s free and used space, the number  
of tracks and playlists in the library information and the date they  
were last modified  
1List of  
contents  
The contents of the selected medium are displayed.  
2Uppermost  
level  
Displays the name of the upper folder or media of the displayed  
item.  
rekordbox on a computer or mobile device: The number of tracks  
and playlists in the library information  
Part of the artwork registered in rekordbox is displayed here.  
When the [INFO/LINK INFO] button is pressed, the jacket photo  
turns off and the track names are displayed along the left edge.  
For lists of playlists and playing histories, a serial number is  
displayed.  
Other browsing operations  
3Jacket photo  
If there is no rekordbox library, the track names are constantly  
displayed along the left edge.  
Rearranging tracks (Sort menu)  
While browsing, the sort menu can be used to change the order of the  
tracks.  
4Cursor  
Turn the rotary selector to move the cursor up and down.  
The categories displayed with rekordbox can be selected.  
When the [INFO/LINK INFO] button is pressed, the details of  
the track selected with the cursor are displayed.  
If there is no rekordbox library, the details of the track selected  
with the cursor are displayed.  
5User-set  
categories  
!
This function only works in the following cases:  
When browsing the rekordbox library on a computer or mobile  
device  
While browsing the rekordbox library on a storage device (SD,  
USB)  
Distinguishing the currently playing device  
1 Display the rekordbox library.  
The currently playing device and the device displayed on the browse  
screen can be distinguished according to how the device buttons are lit.  
=
Playing storage devices (SD, USB) of other players and mobile  
devices on which rekordbox is installed (p.23)  
!
!
Lit: That device is being browsed.  
Flashing: Tracks on that device are loaded.  
=
Playing the rekordbox library on a computer or mobile device (p.24)  
2 When a list of the tracks is displayed, press the  
[MENU/UTILITY] button.  
The sort menu appears on the screen.  
Basic operations on the browse screen  
3 Use the rotary selector to select and enter the sort  
Selecting items  
item.  
The tracks on the list are sorted according to the selected item.  
!
The sort items displayed on the sort menu can be changed in the  
rekordbox settings. For rekordbox libraries on storage devices  
(SD, USB), the settings are reflected after they are changed then  
re-exported.  
1 Display the browse screen.  
=
Switching to the browse screen (p.31)  
2 Turn the rotary selector to select an item.  
Searching for tracks  
!
This function only works in the following cases:  
When browsing the rekordbox library on a computer or mobile  
device  
The jump function can be used by pressing the rotary selector for over 1  
second.  
While browsing the rekordbox library on a storage device (SD,  
USB)  
=
For details on the jump function, see Searching using the jump  
function on page 33.  
Searching using the [SEARCH] category  
3 Press the rotary selector to enter the item.  
In the library browse mode, tracks can be search for using the [SEARCH]  
category.  
1 Display the rekordbox library.  
=
Playing storage devices (SD, USB) of other players and mobile  
devices on which rekordbox is installed (p.23)  
=
Playing the rekordbox library on a computer or mobile device (p.24)  
When there is a lower layer, that layer opens. When a menu, etc., is  
displayed, the selected item is entered.  
When the rotary selector is pressed while the cursor is set at a track, that  
track is loaded in this unit.  
2 Use the rotary selector to select and enter the  
[SEARCH] category.  
A character appears at the bottom of the main unit display.  
32  
En  
3 Use the [NEEDLE SEARCH] pad to input a character.  
Only the tracks including the character you have input are displayed.  
In the page jump mode  
=
Inputting characters using the [NEEDLE SEARCH] pad (p.33)  
1 Display a list not sorted in alphabetical order.  
Display a list that is not sorted in alphabetical order, such as the tracks  
on a music CD, folders on a storage device (SD, USB) or a disc, etc.  
!
!
When more characters are input, only the tracks including the char-  
acter string you have input are displayed.  
When the [BACK] button is pressed, the category selection screen  
reappears.  
2 Press the rotary selector for at least 1 second.  
The mode switches to the page jump mode.  
Inputting characters using the [NEEDLE SEARCH]  
3 Turn the rotary selector to select the page.  
The display moves to the selected page.  
pad  
For several of this unit’s functions, this pad is used to input characters.  
Using the information jump function  
1 Touch the [NEEDLE SEARCH] pad.  
The categories to which tracks belong can be displayed by selecting  
items displayed in the details. This function is convenient for search-  
ing for tracks in the same genre as the loaded track, tracks with similar  
BPMs, etc.  
1 Load a track.  
2 At the normal playback screen, press the [INFO]  
button.  
The track’s details are displayed.  
!
For details, see Displaying the details of the currently loaded track  
on page 36.  
The character directly above the position touched is enlarged.  
3 Select and enter the item.  
2 Release your finger from the [NEEDLE SEARCH] pad.  
The screen switches to the browse screen and the category for the  
selected item is displayed.  
The enlarged character is input.  
!
To input more characters at this point, repeat the above  
procedure.  
!
!
To close the browse screen, press the [BROWSE] button.  
It may not be possible to select items, for example for items with  
nothing to be displayed on the browse screen, items for which only  
icons are displayed in the details, etc.  
!
The letters that can be input are letters A to Z, numbers 0 to 9 and  
certain symbols. The characters that can be input switch when  
you press directly below [ABC] and [123].  
!
!
When a track is selected, the browse screen displayed directly before  
the track was loaded is displayed.  
For tracks on disc and storage devices (SD, USB) that do not contain  
rekordbox libraries, only the track items can be selected.  
!
When  
is input, a single character is deleted. If input  
again, characters are deleted consecutively.  
Searching by using the key of the  
currently playing track  
When KEY category is displayed, the key icon switches to blue for tracks  
whose keys are good matches to the key of the currently playing track.  
Using hot cue banks  
Hot cue banks that have been set ahead of time with rekordbox can be  
loaded as a set into this unit’s [HOT CUE] buttons (A, B and C).  
1 Connect the storage device (SD, USB) on which the  
hot cue banks are stored to this unit.  
Searching using the jump function  
The jump function can be used to instantaneously move to the track,  
category or folder you want to play.  
2 Use the rotary selector to select and enter the  
[HOT CUE BANK] category on the browse screen.  
A list of hot cue banks is displayed.  
The jump function includes the two modes below.  
!
Letter jumping: Use this when the tracks are arranged or sorted in  
alphabetical order.  
Page jumping: Use this when tracks are not in alphabetical order or  
are not sorted.  
3 Use the rotary selector to select and enter the hot cue  
bank you want to call out.  
The hot cues registered in the hot cue bank are displayed on the screen.  
!
!
The cursor is set to hot cue bank A, and cannot be moved with the  
rotary selector or any other button.  
In the letter jump mode  
4 Press the rotary selector.  
The hot cues set at this unit’s [HOT CUE] (A, B and C) buttons are over-  
written with the hot cues registered in the hot cue bank. The [HOT CUE]  
(A, B and C) buttons light.  
1 Display a list sorted in alphabetical order.  
Display a list that is sorted in alphabetical order, such as the rekordbox  
library, the track list on the storage device (SD, USB), etc.  
!
When a new hot cue is stored at one of this unit’s [HOT CUE] buttons  
(A, B or C) after loading the hot cue bank, overwriting the hot cue  
bank’s hot cue, the other two hot cues registered from the hot cue  
bank are also deleted.  
2 Press the rotary selector for at least 1 second.  
Switch to the letter jump mode. The first letter of the track or category  
selected with the cursor is enlarged.  
!
Hot cue banks cannot be edited on this unit. Use rekordbox to edit  
them. For details, see the rekordbox (Mac/Windows) operating  
instructions.  
3 Turn the rotary selector to select the character or  
symbol.  
The cursor moves to tracks or categories starting with the selected  
character or symbol.  
!
If there are no tracks or categories starting with the selected charac-  
ter on the list, the cursor does not move.  
The characters displayed in the letter jump mode are letters A to Z,  
numbers 0 to 9 and certain symbols.  
En  
33  
Checking the playing history  
Editing tag lists  
(HISTORY)  
The track playing history is stored and displayed at the [HISTORY] cat-  
Tracks to be played next or tracks selected according to DJ situations  
can be marked and collected on lists. The list of collected tracks is called  
the “tag list”. These tag lists can be shared in real time among multiple  
DJ players connected by PRO DJ LINK.  
egory on the browse screen.  
!
Playlists can be created based on the playing history at [HISTORY]  
using rekordbox. For details, see rekordbox (Mac/Windows)’s operat-  
ing instructions.  
!
!
Up to 100 tracks per device can be added to a tag list.  
One tag list is created per storage device (SD, USB). It is not possible  
to collect tracks from different storage devices (SD, USB) on one tag  
list.  
!
It is not possible to register the same track in the same folder twice.  
Storing the playing history  
1
2
3
4
5
1 Connect a storage device (SD, USB) to this unit.  
2 Play tracks.  
Tracks that have been played for approximately 1 minute are stored on  
the playing history list.  
!
When a storage device (SD, USB) is connected to this unit for the  
first time or when it is reconnected, a new playing history list is  
automatically created on the storage device (SD, USB).  
!
!
!
The names of playing history lists can be preset at [UTILITY].  
=
Setting the playing history list name (p.38)  
When the same track is played two or more times consecutively, it  
may not be stored in the history.  
The maximum number of tracks that can be stored on a playing  
history list is 999. From the 1000th track on, the oldest entries on the  
playing history are deleted to make room for the new entries. Up to  
999 playing history lists can be created.  
1List of  
contents  
The contents of the tag list are displayed here.  
2Medium  
name  
The name of the medium on which the track is recorded is  
displayed here.  
Part of the artwork registered in rekordbox is displayed here.  
When the [INFO/LINK INFO] button is pressed, the jacket photo  
turns off and serial numbers are displayed.  
!
!
When tracks are registered on the playing history list, their track  
names, etc., are displayed in green (indicating that they have been  
played).  
Tracks at the [PLAYLIST] category can be changed to green (played)  
using the [MENU] button. When changed, the tracks are registered  
on the playing history list.  
3Jacket photo  
4Cursor  
Turn the rotary selector to move the cursor up and down.  
The categories displayed with rekordbox can be selected.  
When the [INFO/LINK INFO] button is pressed, the details of  
the track selected with the cursor are displayed.  
5User-set  
categories  
Deleting the playback history  
Adding tracks to the tag list  
1 Connect a storage device (SD, USB) to this unit.  
2 Display the rekordbox library.  
Selecting tracks and adding them  
=
Playing storage devices (SD, USB) of other players and mobile  
devices on which rekordbox is installed (p.23)  
1 Switch to the browse screen and display the list of  
tracks.  
=
Playing the rekordbox library on a computer or mobile device (p.24)  
3 Use the rotary selector to select and enter the  
[HISTORY] category.  
A list of the playing history lists is displayed.  
2 Set the cursor to the track and press the [TAG TRACK/  
REMOVE] button.  
4 Turn the rotary selector and select the playing history  
list to be deleted.  
appears at the left of the track and that track is added to that stor-  
age device’s (SD, USB) tag list.  
!
Tracks can be recorded in the tag list ahead of time using rekordbox.  
5 Press the [MENU/UTILITY] button.  
The remove menu is displayed.  
=
For details on this operation, see the rekordbox (Mac/Windows)  
operating instructions.  
6 Turn the rotary selector to select and enter the range  
to be deleted.  
Adding loaded tracks  
!
!
!
[DELETE]: The currently selected playing history list is deleted.  
[ALL DELETE]: All the playing history lists are deleted.  
When playing history lists on a storage device (SD, USB) are  
imported to rekordbox as playlists, the imported playing history lists  
are deleted from the storage device (SD, USB).  
For tracks in the [PLAYLIST] category, the track names can be  
changed from green (played) to white (not played) using the [MENU]  
button. When this change is made, the tracks are deleted from the  
playing history list.  
1 Load a track.  
2 At the normal playback screen, press the [INFO]  
button.  
!
3 Press the [TAG TRACK/REMOVE] button.  
The track loaded in this unit is added to the tag list.  
!
Tracks can be added to the tag list by pressing the [TAG TRACK/  
REMOVE] button at the normal playback screen as well.  
7 Use the rotary selector to select and enter [OK].  
Adding entire categories or folders  
All the tracks in a selected category or folder can be added to the tag list.  
34  
En  
1 Switch to the browse screen and select a category or  
Removing one track at a time  
folder that has tracks directly under it.  
A list of the tracks is displayed on the right half of the information display  
screen.  
1 Press the [TAG LIST] button.  
The tag list is displayed.  
2 Set the cursor to the category or folder, then press  
2 Use the rotary selector to select and enter the storage  
the [TAG TRACK/REMOVE] button.  
The category or folder name flashes, and all the tracks in that category or  
folder are added to the tag list.  
device (SD, USB).  
When a storage device (SD, USB) is selected, the tag list on that storage  
device (SD, USB) is displayed.  
!
When folders are added while in the folder browse mode, tracks for  
which ID3 tags, etc., have not been loaded a single time are regis-  
tered using the file name as the track name. The artist names are not  
registered.  
3 Use the rotary selector to set the cursor to the track  
you want to remove.  
!
After tracks have been added to the tag list, when the registered  
tracks are displayed on the track list on the browse screen or are  
loaded in a player and their ID3 tags, etc., are loaded, the file names  
switch to the track names and the artist names are also registered.  
4 Press the [TAG TRACK/REMOVE] button for over 1  
second.  
Tracks can be removed from tag lists by pressing the [TAG TRACK/  
REMOVE] button at the screens and in the situations described below.  
!
When the cursor is set to a track registered in the tag list on the  
browse screen  
Adding tracks from playlists  
!
When the normal playback screen or a track’s details screen is  
displayed while a track registered in the tag list is loaded  
All the tracks on a selected playlist can be added to the tag list.  
1 Switch to the browse screen and select and enter the  
Removing all the tracks  
[PLAYLIST] category.  
A list of the playlists is displayed, and a list of the tracks is displayed on  
the right half of the information display screen.  
1 Press the [TAG LIST] button.  
The tag list is displayed.  
2 Set the cursor to the playlist, then press the  
2 Use the rotary selector to select and enter the storage  
[TAG TRACK/REMOVE] button.  
The playlist name flashes, and all the tracks on that playlist are added to  
the tag list.  
device (SD, USB).  
When a storage device (SD, USB) is selected, the tag list on that storage  
device (SD, USB) is displayed.  
3 Press the [MENU/UTILITY] button.  
[LIST MENU] is displayed.  
Loading tracks from the tag list  
4 Use the rotary selector to select and enter [TAGLIST  
MENU].  
[TAGLIST MENU] is displayed.  
1 Press the [TAG LIST] button.  
The tag list is displayed.  
5 Use the rotary selector to select and enter [REMOVE  
ALL TRACKS].  
6 Use the rotary selector to select and enter [OK].  
Transforming the tag list into a playlist  
Tracks collected in tag lists can be converted into playlists.  
!
Converted playlists are displayed as items in the [PLAYLIST]  
category.  
!
When multiple storage devices (SD, USB) are connected to the DJ  
player, the number of the player to which that storage device (SD,  
USB) is connected is displayed in front of the storage device’s (SD,  
USB) name.  
1 Press the [TAG LIST] button.  
The tag list is displayed.  
2 Use the rotary selector to select and enter the storage  
2 Use the rotary selector to select and enter the storage  
device (SD, USB).  
When a storage device (SD, USB) is selected, the tag list on that storage  
device (SD, USB) is displayed.  
device (SD, USB).  
When a storage device (SD, USB) is selected, the tag list on that storage  
device (SD, USB) is displayed.  
3 Press the [MENU/UTILITY] button.  
[LIST MENU] is displayed.  
3 Use the rotary selector to select and enter the track  
you want to load.  
The track is loaded and playback starts.  
4 Use the rotary selector to select and enter [TAGLIST  
MENU].  
[TAGLIST MENU] is displayed.  
Removing tracks from the tag list  
Tracks can be removed from tag lists.  
5 Use the rotary selector to select and enter [CREATE  
PLAYLIST].  
!
If a track that has been added to the tag list is removed from the tag  
list while it is playing, the track is played to the end, then the stop  
mode is set. The next track is not played.  
6 Use the rotary selector to select and enter [OK].  
The contents of the tag list are converted into a playlist with the name  
[TAG LIST XXX].  
!
Tag lists cannot be converted into playlists when no rekordbox library  
information is stored on the storage device (SD, USB).  
En  
35  
!
When tag lists include both tracks being managed with rekordbox  
and tracks not being managed with rekordbox, only the tracks being  
managed with rekordbox are converted into playlists.  
2 Press the [INFO] button for over 1 second.  
The [LINK INFO] screen appears.  
3 Use the rotary selector to select and enter the DJ  
player whose track details you want to see.  
The details of the tracks loaded in the selected DJ player are displayed.  
Displaying the details of the  
currently loaded track  
The details of the currently loaded track can be checked.  
1
2
3
4
The details of the tracks loaded in the DJ player are dis-  
played here.  
1Track details  
2Medium/player  
number  
The place where the track information is stored is displayed  
here.  
3Jacket photo and  
comment  
The jacket photo and comment about the track loaded in  
the DJ player are displayed here.  
4Source indicator  
This indicates the location of the currently loaded track.  
The source indicator (4) is not displayed when a disc inserted into this  
unit or a storage device (SD, USB) connected to this unit is loaded.  
1 Load a track.  
2 At the normal playback screen, press the [INFO]  
button.  
The track’s details are displayed.  
Changing track ratings  
The tracks’ ratings can be changed.  
1 Select the rating displayed in the detailed information  
(display example:  
).  
2 Press the rotary selector for over 1 second, then turn  
the rotary selector clockwise or counterclockwise.  
The rating of the loaded track is changed.  
Displaying details of tracks loaded  
in other DJ players  
When another DJ player is connected by PRO DJ LINK, the details of the  
track loaded on the other DJ player can be checked.  
1 Connect this unit and the other DJ players by PRO DJ  
LINK.  
36  
En  
Displaying the [UTILITY] screen  
Changing the  
settings  
Press the [MENU/UTILITY] button for over 1 second.  
The [UTILITY] screen is displayed.  
Description of the screen  
Storing the settings on a storage  
device (SD, USB)  
1
2
The [UTILITY] settings and other settings can be stored on a storage  
device (SD, USB).  
The stored settings can be exported to rekordbox.  
It is also to make this unit’s settings with rekordbox then store them on a  
storage device (SD, USB) and reflect those settings on other DJ players.  
!
The stored settings are shown below.  
[UTILITY] settings  
PLAY MODE, EJECT/LOAD LOCK, AUTO CUE LEVEL, SLIP  
FLASHING, ON AIR DISPLAY, JOG BRIGHTNESS, JOG  
INDICATOR, DISC SLOT ILLUMINATION, LANGUAGE, LCD  
BRIGHTNESS  
Other settings  
1Setting item  
This unit’s settings items are displayed here.  
TIME MODE (how the time is displayed on the main unit display),  
AUTO CUE, JOG MODE, TEMPO RANGE, MASTER TEMPO,  
QUANTIZE, SYNC  
2Setting  
The settings for the various items are displayed here.  
1 Connect the storage device (SD, USB) on which you  
want to store the settings.  
Changing the settings  
2 Press the device button (SD or USB).  
1 Press the [MENU/UTILITY] button for over 1 second.  
When the storage device (SD, USB) on which you want to store the  
settings is connected to another DJ player connected by PRO DJ LINK,  
press the [LINK] button to select the storage device.  
The [UTILITY] screen is displayed.  
2 Use the rotary selector to select the setting item.  
3 Set the cursor to the item you want to change, then  
press the rotary selector.  
The cursor moves to the setting.  
3 Press the [MENU/UTILITY] button.  
4 Use the rotary selector to select and enter [SAVE] at  
[MY SETTINGS].  
The settings are stored.  
4 Turn the rotary selector and change the setting.  
5 Press the rotary selector to enter the setting.  
The cursor returns to the setting.  
Calling out settings stored on a  
storage device (SD, USB)  
!
When the [BACK] button is pressed before entering the setting, the  
change is aborted.  
6 Press the [MENU/UTILITY] button.  
The screen returns to the screen displayed before the [MENU/UTILITY]  
button was pressed.  
The [UTILITY] settings and other settings stored on a storage device (SD,  
USB) can be called out.  
1 Connect the storage device (SD, USB) on which the  
settings are stored.  
Setting preferences  
2 Press the device button (SD or USB).  
When the storage device (SD, USB) on which you want to store the  
settings is connected to another DJ player connected by PRO DJ LINK,  
press the [LINK] button to select the storage device.  
Options  
settings  
Setting ranges  
Descriptions  
Changes the way the tracks loaded  
in this unit are played.  
For details, see Changing the play  
mode on page 38.  
3 Press the [MENU/UTILITY] button.  
PLAY MODE  
CONTINUE*/SINGLE  
4 Use the rotary selector to select and enter [LOAD] at  
[MY SETTINGS].  
The settings are called out.  
Sets whether to disable or enable  
ejecting of discs during playback  
and loading of new tracks during  
playback.  
EJECT/LOAD  
LOCK  
LOCK/UNLOCK*  
–36 dB/–42 dB/  
AUTO CUE  
LEVEL  
–48 dB/–54 dB/–60 dB*/ For details, see Setting the cue point  
–66 dB/–72 dB/–78 dB  
for auto cueing on page 29.  
/MEMORY  
Sets whether or not the indicators  
of buttons, etc., for which the slip  
function is activated when the  
[SLIP] button is pressed flash.  
SLIP FLASHING ON*/OFF  
En  
37  
Options  
settings  
Setting ranges  
Descriptions  
Setting the auto standby mode  
Selects the method of display  
when connected by PRO DJ LINK  
to an ON AIR DISPLAY compatible  
mixer. Also refer to the operating  
instructions of the ON AIR DISPLAY  
compatible mixer (DJM-2000, etc.).  
1 Display the [UTILITY] screen.  
ON AIR  
DISPLAY  
=
Displaying the [UTILITY] screen (p.37)  
ON*/OFF  
2 Use the rotary selector to select and enter [AUTO  
STANDBY].  
JOG  
BRIGHTNESS  
Selects the brightness of the JOG  
RING ILLUMINATION.  
OFF/1/2*  
3 Use the rotary selector to select and enter [ON] or  
Selects whether the JOG RING  
ILLUMINATION flashes or not when  
the track’s remaining time is low.  
[OFF].  
JOG  
INDICATOR  
ON*/OFF  
When [AUTO STANDBY] is set to [ON], the auto standby function is  
activated and the standby mode is set in the cases described below.  
DISC SLOT  
ILLUMINATION  
Sets the brightness of the disc  
insertion slot indicator.  
!
When no operation has been performed for over 4 hours with no  
disc inserted, no storage device (SD, USB) connected, no device  
connected by PRO DJ LINK and no computer connected to the  
USB port (on the main unit’s rear panel).  
OFF/1/2*  
Sets the main unit display's  
language.  
LANGUAGE  
!
!
When this unit is operated, the standby mode is canceled.  
This unit is shipped with the auto standby function turned on. If you  
do not want to use the auto standby function, set [AUTO STANDBY]  
to [OFF].  
LIBRARY  
CREATOR  
Selects whether or not to display  
Pioneer MEP-7000 libraries.  
LIBRARY*/FOLDER  
HISTORY  
NAME  
For details, see Setting the playing  
history list name on page 38.  
Sets this unit’s player number. The  
player number cannot be changed  
when a medium is loaded in this  
unit.  
PLAYER No.  
AUTO*, 1 4  
Setting the playing history list name  
The name of the playing history list stored on storage devices (SD, USB)  
can be preset.  
When PRO DJ LINK connections  
are made, the connection status is  
displayed here.  
LINK STATUS  
1 Display the [UTILITY] screen.  
For details, see Changing the MIDI  
channel setting on page 41.  
MIDI CHANNEL 1* to 16  
=
Displaying the [UTILITY] screen (p.37)  
This switches the number of bits of  
the audio signals output from the  
[DIGITAL OUT] terminal.  
2 Use the rotary selector to select and enter [HISTORY  
NAME].  
DIGITAL OUT  
16 bit/24 bit*  
AUTO  
STANDBY  
For details, see Changing the MIDI  
channel setting on page 41.  
3 Use the [NEEDLE SEARCH] pad to input a character.  
ON*/OFF  
=
Inputting characters using the [NEEDLE SEARCH] pad (p.33)  
LCD  
BRIGHTNESS  
Sets the main unit display’s  
brightness.  
1 3* – 5  
4 Press the rotary selector to enter.  
The name is changed to the name you have input.  
When set to [ON], the screensaver  
starts up in the following cases:  
!
When the name of the playing history list is changed, the number  
after the playing history list name returns to 001. This number is  
incremented each time a playing history list is created.  
The maximum number of characters that can be set for the  
[HISTORY] name is 32, including both letters, numbers and symbols.  
!
When no track is loaded in this  
unit for over 5 minutes  
!
When no operation is per-  
formed for over 100 minutes  
while in the pause or cue  
standby mode or when [END]  
is displayed on the main unit  
display.  
!
SCREEN SAVER ON*/OFF  
Changing the language  
Select the language to be used for displaying track names and mes-  
sages on the screen.  
For details, see Duplicating the  
settings onto DJ players connected  
by PRO DJ LINK on page 39.  
DEFAULT*, ALL,  
PLAYER14  
DUPLICATION  
VERSION No.  
!
When the language is changed, the messages on the main unit  
display are displayed in the selected language.  
When displaying track names, etc., to display characters written in  
local codes other than Unicode, change the [LANGUAGE] setting.  
Displays this unit’s software  
version.  
!
*: Setting upon purchase  
1 Display the [UTILITY] screen.  
=
Displaying the [UTILITY] screen (p.37)  
Changing the play mode  
2 Use the rotary selector to select and enter  
[LANGUAGE].  
1 Display the [UTILITY] screen.  
=
Displaying the [UTILITY] screen (p.37)  
3 Use the rotary selector to select and enter the  
language.  
The language of the on-screen display is changed.  
2 Use the rotary selector to select and enter [PLAY  
MODE].  
3 Use the rotary selector to select and enter  
[CONTINUE] or [SINGLE].  
CONTINUE: Moving to the previous or following track is possible in all  
modes.  
SINGLE: The letters [TRACK] on the main unit display switch to [SINGLE]  
and it is no longer possible to move to the previous or following track  
other than with the track search and search buttons.  
!
For tracks on music CDs, operation is the same as in the  
[CONTINUE] mode, regardless of this setting.  
38  
En  
!
If the CD-ROM menu does not appear when the CD-ROM is inserted,  
open the optical drive from [Computer (or My Computer)] in the  
[Start] menu, then double-click the [CD_menu.exe] icon.  
Duplicating the settings onto DJ  
players connected by PRO DJ LINK  
The [UTILITY] settings and other settings can be duplicated onto DJ play-  
ers connected by PRO DJ LINK.  
5 When the CD-ROM’s menu is displayed, select [Install  
Driver Software], then click [Start].  
!
The duplicated settings are as shown below.  
[UTILITY] settings  
PLAY MODE, EJECT/LOAD LOCK, AUTO CUE LEVEL, SLIP  
FLASHING, ON AIR DISPLAY, JOG BRIGHTNESS, JOG  
INDICATOR, DISC SLOT ILLUMINATION, LANGUAGE, LCD  
BRIGHTNESS  
Other settings  
TIME MODE (how the time is displayed on the main unit display),  
AUTO CUE, JOG MODE, TEMPO RANGE, MASTER TEMPO,  
QUANTIZE, SYNC  
1 Select [DUPLICATION] and enter.  
2 Stop playback on the DJ player(s) on which you want  
to reflect the settings.  
3 Use the rotary selector to select and enter [PLAYER X]  
or [ALL].  
!
To close the CD-ROM menu, click [Exit].  
[PLAYER1]–[PLAYER4]: The settings are duplicated on the specified DJ  
player. Currently playing DJ players cannot be selected.  
[ALL]: The settings are duplicated on all the DJ players connected by  
PRO DJ LINK. The settings cannot be duplicated on currently playing DJ  
players.  
[DUPLICATED] is displayed on the specified player’s display and this  
unit’s [UTILITY] settings and other settings are duplicated on the speci-  
fied player.  
6 Proceed with installation according to the instructions  
on the screen.  
If [Windows Security] appears on the screen while the installation is  
in progress, click [Install this driver software anyway] and continue  
with the installation.  
!
When installing on Windows XP  
If [Hardware Installation] appears on the screen while the installa-  
tion is in progress, click [Continue Anyway] and continue with the  
installation.  
[DEFAULT]: Restores this unit’s settings to the settings set upon  
purchase.  
!
When the installation program is completed, a completion message  
appears.  
About the driver software  
(Windows)  
Connecting this unit and a computer by  
USB  
1 Connect this unit to your computer via a USB cable.  
For instructions on connecting, see Using other brands of DJ software on  
page 15.  
Installing the driver software  
!
There is no need to install the driver software when using Mac OS X.  
Operating environment  
Supported operating systems  
2 Press the [POWER ON/OFF] button.  
Turn on the power of this unit.  
!
The message [Installing device driver software] may appear when  
this unit is first connected to the computer or when it is connected to  
a different USB port on the computer. Wait a while until the message  
[Your devices are ready for use] appears.  
®
32-bit version  
64-bit version  
32-bit version  
1
Windows 7 Home Premium/Professional/  
Ultimate  
1
1
®
Windows Vista Home Basic/  
Home Premium/Business/Ultimate (SP2 or  
later)  
1
1
!
When installing on Windows XP  
64-bit version  
32-bit version  
1
[Can Windows connect to Windows Update to search for  
software?] may appear while the installation is in progress.  
Select [No, not this time], then click [Next] to continue  
installation.  
[What do you want the wizard to do?] may appear while  
the installation is in progress. Select [Install the software  
automatically (Recommended)], then click [Next] to continue  
installation.  
®
Windows XP Home Edition/  
1
Professional (SP3 or later)  
1
When using a 64-bit version of Windows, the driver software can only be used for  
32-bit applications.  
Before installing the driver software  
!
!
Read Software end user license agreement on page 8 carefully.  
If you connect this unit to your computer without installing the driver  
software first, an error may occur on your computer depending on  
the system environment.  
If [Hardware Installation] appears on the screen while the  
installation is in progress, click [Continue Anyway] and con-  
tinue with the installation.  
!
If installation of the driver software is interrupted after it has started,  
start the installation procedure over again from the beginning.  
1 Turn off this unit’s power switch and disconnect the  
USB cable connecting this unit to the computer.  
2 Log in as the user set as the computer’s administrator.  
3 Quit any other programs running on the computer.  
4 Insert the CD-ROM into the computer’s optical drive.  
The CD-ROM menu is displayed.  
En  
39  
Adjusting the buffer size (Windows)  
This unit functions as an audio device conforming to the ASIO  
standards.  
Checking the version of the driver  
software  
!
You can check the firmware version of this unit on the screen.  
!
If an application using this unit as the default audio device (DJ  
software, etc.) is running, quit that application before adjusting the  
buffer size.  
Click the Windows [Start] menu>[All  
Programs]>[Pioneer]>[Pioneer CDJ]>[Pioneer CDJ  
Version Display Utility].  
Click the Windows [Start] menu>[All  
Programs]>[Pioneer]>[Pioneer CDJ]>[Pioneer CDJ ASIO  
Settings Utility].  
!
The firmware version is not displayed when this unit is not connected  
to the computer or when this unit and computer are not properly  
communicating.  
Checking the latest information on the  
driver software  
For the latest information on the driver software for exclusive use with  
this unit, visit our website shown below.  
!
If the buffer size is made large, drops in audio data (breaks in the  
sound) occur less easily, but the time lag due to the delay in the  
transfer of the audio data (latency) increases.  
For the bit number, specify the bit depth during ASIO playback.  
Operate referring to the procedure below to adjust the buffer size and  
kernel buffer.  
!
!
If there are no interruptions in the sound with  
the default settings  
1 Gradually decrease the buffer size, setting it to the  
minimum value at which there are no interruptions in  
the sound.  
2 Set the kernel buffer size to [2] and check whether  
there are interruptions in the sound.  
!
If there are interruptions in the sound, set the kernel buffer size to  
[3].  
If there are interruptions in the sound with the  
default settings  
Set the kernel buffer size to [4], then set the buffer  
size to the minimum value at which there are no  
interruptions in the sound.  
40  
En  
Changing the MIDI channel setting  
Using other brands of  
DJ software  
1 Press the [MENU/UTILITY] button for over 1 second.  
The utility screen appears.  
2 Select [MIDI CHANNEL] and enter.  
3 Turn the rotary selector.  
Select the MIDI channel and change the setting. A setting from 1 – 16  
can be selected.  
Operating DJ software by MIDI  
interface  
This unit also outputs the operating data for the buttons and dials in  
MIDI format. If you connect a computer with a built-in MIDI-compatible  
DJ software via a USB cable, you can operate the DJ software on this  
unit. The sound of music files being played on the computer can also be  
output from the CDJ-2000NXS.  
4 Press the rotary selector to enter.  
5 Press the [MENU/UTILITY] button.  
The previous screen reappears.  
To use this unit as an audio device, install the driver software on the  
computer beforehand (page 39). This unit must also be selected in the  
DJ software’s audio output device settings. For details, see your DJ  
software’s operating instructions.  
1 Connect the USB port on this unit to your computer.  
For instructions on connecting, see Using other brands of DJ software on  
page 15.  
2 Press the [BROWSE] button, then press the [LINK]  
button.  
[Control Mode] and [USB-MIDI] appear on the menu screen.  
3 Select [Control Mode] and enter.  
The connecting screen is displayed.  
4 Select [USB-MIDI] and enter.  
This unit switches to the control mode.  
5 Launch the DJ software.  
Communication with the DJ software starts.  
!
The DJ software on the computer can be operated using the buttons  
and rotary selector on this unit.  
!
It may not be possible to use some buttons to operate the DJ  
software.  
!
!
The control mode is canceled when a track is loaded in this unit.  
For messages output by this unit, see List of MIDI Messages on page  
42.  
En  
41  
MIDI Messages  
MSB  
SW  
Type  
SW Name  
Notes  
List of MIDI Messages  
BACK  
SW  
9n  
32  
dd  
OFF=0, ON=127  
OFF=0, ON=127  
MIDI Messages  
SW  
Type  
SW Name  
Notes  
ENCODER  
PUSH  
MSB  
SW  
9n  
33  
dd  
A linear value corresponding  
to the speed, from stop to 4X:  
64 for stop, 65 (0.06X) – 127  
(4X) in the forward direction,  
63 (0.06X) – 0 (4X) in the  
reverse direction.  
Touch  
Sensor  
OFF = 0 1 to 127 position data  
from left to right side  
NEEDLE  
Bn  
1C  
dd  
JOG (TOUCH)  
Bn  
10  
dd  
n is the channel number.  
TEMPO  
SLIDER  
0 – 127, 0 on the – side, 127 on  
the + side  
VR  
VR  
Bn  
Bn  
1D  
1E  
dd  
dd  
0 – 127, 0 (min.) on the left  
side, 127 (max.) on the right  
side  
TOUCH/  
BRAKE  
0 – 127, 0 (min.) on the left  
side, 127 (max.) on the right  
side  
RELEASE/  
START  
VR  
Bn  
Bn  
1F  
30  
dd  
dd  
A linear value corresponding  
to the speed from 0.5X to  
4X: 64 when stopped (under  
0.49X), 65 (0.5X) to 127 (4X)  
in the forward direction, 63  
(0.5X) to 0 (4X) in the reverse  
direction.  
JOG RING  
ENCODER  
98 – 127, 1 – 30 Difference of  
count from previous time is  
sent (±1 – ±30) When over  
±30, set at ±30  
General  
Purpose  
Controller  
Bn  
4F  
dd  
PLAY/PAUSE SW  
9n  
9n  
00  
01  
dd  
dd  
OFF=0, ON=127  
OFF=0, ON=127  
CUE  
SW  
SEARCH  
FWD  
SW  
9n  
9n  
02  
03  
dd  
dd  
OFF=0, ON=127  
OFF=0, ON=127  
SEARCH REV SW  
TRACK  
SEARCH  
NEXT  
SW  
SW  
9n  
9n  
04  
05  
dd  
dd  
OFF=0, ON=127  
OFF=0, ON=127  
TRACK  
SEARCH  
REV  
LOOP IN  
SW  
SW  
SW  
SW  
SW  
SW  
SW  
SW  
SW  
9n  
9n  
9n  
9n  
9n  
9n  
9n  
9n  
9n  
06  
07  
08  
09  
0A  
0B  
0C  
0D  
0E  
dd  
dd  
dd  
dd  
dd  
dd  
dd  
dd  
dd  
OFF=0, ON=127  
OFF=0, ON=127  
OFF=0, ON=127  
OFF=0, ON=127  
OFF=0, ON=127  
OFF=0, ON=127  
OFF=0, ON=127  
OFF=0, ON=127  
OFF=0, ON=127  
LOOP OUT  
RELOOP  
QUANTIZE  
MEMORY  
CALL NEXT  
CALL PREV  
DELETE  
TIME/A.CUE  
TEMPO  
RANGE  
SW  
SW  
9n  
9n  
10  
11  
dd  
dd  
OFF=0, ON=127  
OFF=0, ON=127  
MASTER  
TEMPO  
JOG MODE  
HOT CUE A  
HOT CUE B  
HOT CUE C  
SW  
SW  
SW  
SW  
9n  
9n  
9n  
9n  
12  
18  
19  
1A  
dd  
dd  
dd  
dd  
OFF=0, ON=127  
OFF=0, ON=127  
OFF=0, ON=127  
OFF=0, ON=127  
HOT CUE  
REC/CALL  
SW  
SW  
9n  
9n  
1C  
1D  
dd  
dd  
OFF=0, ON=127  
OFF=0, ON=127  
TEMPO  
RESET  
MASTER  
SYNC  
SW  
SW  
SW  
SW  
9n  
9n  
9n  
9n  
9n  
9n  
9n  
9n  
1E  
1F  
20  
21  
2A  
2C  
2F  
30  
dd  
dd  
dd  
dd  
dd  
dd  
dd  
dd  
OFF=0, ON=127  
OFF=0, ON=127  
OFF=0, ON=127  
OFF=0, ON=127  
OFF=0, ON=127  
OFF=0, ON=127  
OFF=0, ON=127  
OFF=0, ON=127  
JOG TOUCH  
REVERSE  
LOOP MODE SW  
SLIP  
SW  
SW  
SW  
EJECT  
TAG TRACK  
42  
En  
Additional information  
Troubleshooting  
!
Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this component, check the points  
below. Sometimes the trouble may lie in another component. Inspect the other components and electrical appliances being used. If the trouble  
cannot be rectified after checking the items below, ask your nearest Pioneer authorized service center or your dealer to carry out repair work.  
This unit may not operate properly due to such external causes as static electricity. If this happens, normal operation can sometimes be restored by  
turning the power off, waiting for the disc to stop completely, then turning the power back on.  
!
Problem  
Check  
Remedy  
Disc cannot be ejected.  
Is [EJECT/LOAD LOCK] set to [LOCK]?  
Press the [PLAY/PAUSEf] button to set the pause mode, then press the  
[DISC EJECTh] button.  
Set [EJECT/LOAD LOCK] at [UTILITY] to [UNLOCK], then press the  
[DISC EJECTh] button.  
If the [DISC EJECTh] button does not work, insert the pin into the disc force  
eject hole to eject the disc.  
Playback does not start when disc  
is loaded.  
Is the disc or file playable?  
See Usable media on page 5.  
Is the auto cue function activated?  
Is the file copyright-protected (by DRM)?  
Press [AUTO CUE] for at least 1 second to turn cancel the auto cue function.  
Copyright-protected files cannot be played.  
Check the operation of the DJ mixer.  
File cannot be played.  
No sound is produced, or sound is  
distorted or noisy.  
Are you operating the connected DJ mixer  
properly?  
Is this unit placed near a TV?  
Is the disc scratched?  
Turn the TV’s power off or install this unit and TV away from each other.  
Scratched discs may not play.  
Loud noise is produced or playback  
stops when a certain disc is played.  
Is the disc dirty?  
Wipe the dirt off the disc. (page 46)  
File information is not properly  
displayed.  
Is [LANGUAGE] properly set?  
Set [LANGUAGE] to the proper language.  
Is the information recorded in a language not sup- When creating files using DJ software, etc., record the information in a language  
ported by this unit?  
supported by this unit.  
Track search operation takes too long. Is the auto cue function activated?  
Track searching may take some time when there are long silent sections  
between tracks.  
If track searching is not possible within 10 seconds, a cue point is set at the  
beginning of the track.  
Back cue function does not work.  
Loop play function does not work.  
Is a cue point set?  
Is a cue point set?  
Set the cue point (page 26).  
Set the cue point (page 26).  
Settings are not stored in the memory. Has the power been turned off directly after  
changing the setting?  
After changing settings, wait at least 10 seconds before turning the power off.  
USB device is not recognized.  
Is the USB device properly connected?  
Is the USB device connected via a USB hub?  
Is the USB device supported by this unit?  
Connect the device securely (all the way in).  
USB hubs cannot be used.  
This player only supports USB mass storage class devices.  
This player supports portable flash memory and digital audio playback devices.  
Is the file format supported by this unit?  
Check the file format of the connected USB device. For the file formats sup-  
ported by this unit, see About USB devices on page 6.  
Turn the power off then back on.  
Cue or loop points are not stored on  
storage devices (SD, USB).  
Are you trying to store more points than the limit?  
The maximum number of cue or loop points that can be stored on storage  
devices (SD, USB) per disc is 100. For devices other than discs, the maximum  
limit is 10 points per track.  
If you try to store more points than the limit, [CUE/LOOPPOINT FULL] is dis-  
played and the points cannot be stored. In this case, delete some points before  
storing new ones.  
Is the storage device (SD, USB) write-protected?  
When an SD memory card is write-protected, [CARD PROTECTED] is displayed  
and the points cannot be stored. When a USB device is write-protected,  
[USB FULL] is displayed and the points cannot be stored. Disable write-protec-  
tion then store the points.  
Is there enough free space on the storage device  
(SD, USB)?  
If there is not enough free space on an SD memory card, [CARD FULL] is dis-  
played and the points cannot be stored. If there is not enough free space on a  
USB device, [USB FULL] is displayed and the points cannot be stored. Free some  
space then store the points.  
Cue points or loop of tracks stored on Was the USB device properly stopped before it  
Points may not be displayed if the SD memory card/USB device is removed  
without performing the proper stopping procedure or if this unit’s power is  
turned off.  
a storage device (SD, USB) are not  
displayed.  
was disconnected the last time?  
Check that the SD memory card or USB indicator is completely off before dis-  
connecting storage devices (SD, USB) or turning this unit’s power off.  
When buttons are pressed to call out  
the hot cue storing mode or to reloop,  
or when the lever is moved to set  
reverse playback, the operation does  
not start immediately.  
Is the quantize function on?  
When the quantize function is on, the operation starts from the nearest beat  
position from where buttons are pressed or the lever is moved. To start the  
operation immediately when buttons are pressed or the lever is moved, turn the  
quantize function off.  
En  
43  
Problem  
Check  
Remedy  
The playing address display is not  
displayed in the remaining time mode.  
When playing files recorded in VBR, it may happen that the set cannot detect the  
length of the track immediately and that some time is required for the playing  
address display to appear.  
Much time is required for reading  
storage devices (SD, USB) (flash  
memory devices or hard disks).  
Is there a large number of folders or files stored on When there are many folders or files, some time may be required for loading.  
the storage device (SD, USB)?  
Are files other than music files saved on the stor-  
age device (SD, USB)?  
When files other than music files are stored in folders, time is required to read  
them as well. Do not store files or folders other than music files on the USB  
device.  
Library browsing is not possible.  
Is a medium on which library information is  
recorded loaded?  
The library browse mode is only set when media on which library information  
is recorded are loaded. When a medium on which no library information is  
recorded is loaded, the folder browse mode is set.  
[HISTORY] is not displayed.  
Nothing is displayed.  
Is the storage device (SD, USB) connected?  
Is the auto standby function activated?  
Is the track over 15 minutes long?  
The [HISTORY] function can only be used on the DJ player to which the storage  
device (SD, USB) is connected.  
This unit is shipped with the auto standby function turned on. If you do not want  
to use the auto standby function, set [AUTO STANDBY] to [OFF]. (page 38)  
The scale is not displayed.  
PRO DJ LINK does not work well.  
The scale is not displayed for tracks whose playing time is over 15 minutes.  
(page 20)  
Are the player numbers properly set?  
Set [PLAYER No.] to [AUTO] or to a number different from the number currently  
set. (page 37)  
Is the LAN cable properly connected?  
Is the switching hub’s power turned on?  
Connect the LAN cable properly to the [LINK] terminal.  
Turn the switching hub’s power on.  
Is an unnecessary device connected to the switch- Disconnect the unnecessary device from the switching hub.  
ing hub?  
About the liquid crystal display  
!
!
!
Small black or shining points may appear on the liquid crystal display. This is a phenomenon inherent to liquid crystal displays; this is not a  
malfunction.  
When using in cold places, the liquid crystal display may be dark for a while after this unit’s power is turned on. It will reach the normal brightness  
after a while.  
When the liquid crystal display is exposed to direct sunlight, the light will reflect off it, making it difficult to see. Block the direct sunlight.  
About iPods/iPhones/iPads  
!
com/support/).  
!
!
!
!
Compatibility with this product may be lost if a version other than one indicated on the Pioneer website is installed on your iPod/iPhone/iPad.  
Note that Pioneer does not offer any guarantee regarding operation of iPods/iPhones/iPads.  
Pioneer will accept no responsibility whatsoever for loss of iPod/iPhone/iPad data during use.  
With iPods/iPhones/iPads, material that is not copyrighted or material for which duplication and playback is legally permitted may be duplicated  
and played by individuals on a private basis. Infringement of copyrights is prohibited by law.  
44  
En  
Error messages  
When this unit cannot operate normally, an error code appears on the display. Check the table below and take the measures indicated. If an error code  
not shown on the table below is displayed, or if the same error code is displayed again after taking the indicated action, contact your store of purchase  
or a nearby Pioneer service station.  
Error code  
E-7201  
Error type  
Description of error  
Cause and action  
CANNOT READ DISC  
CANNOT READ DISC  
CANNOT PLAY TRACK(****)  
TOC data cannot be read.  
!
!
!
Disc is cracked.dReplace the disc.  
Disc is dirty.dClean the disc.  
If operation is normal with other discs, the problem is with that  
E-8301  
Disc that cannot be played normally is loaded.  
E-8302  
disc.  
Track data (file) on the disc or storage device  
(SD, USB) cannot be read properly.  
!
The track data (file) may be corrupt. dCheck whether the track  
(file) can be played on another player, etc., capable of playing  
the same formats as this unit.  
E-8303  
CANNOT PLAY TRACK  
E-8304  
E-8305  
Music files that cannot be played normally  
are loaded.  
UNSUPPORTED FILE FORMAT  
MECHANICAL TIMEOUT  
Format is wrong.dReplace with music files in the proper format.  
Mechanical error (time out) during loading or  
ejecting of disc.  
Displayed when mechanism operation is not completed within the  
specified time.  
E-9101  
List of icons displayed on the main unit display section  
Player number  
(1 – 4)  
Genre  
SD  
Open folder  
Close folder  
Remixer  
Comment  
WAIT  
Artist  
Hot Cue  
Computer  
Year  
Album  
Disc  
rekordbox  
Mixer  
Registered in  
tag list  
Track/file name  
Label  
Original artist  
Playlist  
HISTORY  
Hot Cue Bank  
List  
Tempo (BPM)  
Key  
Search  
Rating  
Time  
Color  
USB  
Bit rate  
Playing  
DJ play count  
Date library added  
En  
45  
About specially shaped discs  
Cautions on use  
Irregularly shaped discs other than standard 12 cm discs cannot be  
played on this unit (doing so will lead to damage or accidents).  
Specially shaped discs (heart-shaped, hexagonal, etc.) cannot be played  
on this unit. Do not attempt to play such discs, as they could damage  
the unit.  
About condensation  
Water droplets (condensation) may form inside the unit (on operating  
parts and lenses) in the winter, for example, if the unit is moved from a  
cold place into a warm room or if the temperature in the room in which  
the unit is installed rises suddenly (through heating, etc.). The unit will  
not operate properly and will not be playable with condensation inside.  
Let the unit stand for 1 to 2 hours at room temperature (though this  
time depends on the conditions of the condensation) without turning on  
the power. The water droplets will evaporate and the unit will become  
playable. Condensation can occur in the summer as well if the unit is  
exposed to the direct wind from an air-conditioner, etc. If this happens,  
move the unit to a different location.  
About condensation on discs  
Water droplets (condensation) may form on the surface of discs if they  
are moved from a cold place (particularly in winter) into a warm room.  
Discs may not play normally if there is condensation on them. Carefully  
wipe the water droplets off the surface of the disc before loading it.  
Cleaning the lens  
The player’s lens should not become dirty in normal use, but if for some  
reason it should malfunction due to dust or dirt, consult your nearest  
Pioneer authorized service center. Although lens cleaners for players are  
commercially available, we advise against using them since some may  
damage the lens.  
Handling discs  
Storing  
!
Always place discs in their cases and store them vertically, avoiding  
hot, humid places, places exposed to direct sunlight and extremely  
cold places.  
!
Be sure to read the cautions included with the disc.  
Cleaning discs  
!
Discs may not play if there are fingerprints or dust on them. In this  
case, use a cleaning cloth, etc., to gently wipe the disc from the  
inside towards the outside. Do not use dirty cleaning cloths.  
!
!
Do not use benzene, thinner or other volatile chemicals. Also do not  
use record spray or antistatic agents.  
For tough dirt, apply some water to a soft cloth, wring out thoroughly,  
wipe off the dirt, then wipe off the moisture with a dry cloth.  
Do not use damaged (cracked or warped) discs.  
Do not let the signal surface of discs get scratched or dirty.  
Do not place two discs in the disc tray, one on top of the other.  
Do not attach pieces of paper or stickers to discs. Doing so could  
warp discs, making it impossible to play them. Also note that rental  
discs often have labels attached to them, and the label’s glue may  
have oozed out. Check that there is no glue around the edges of such  
labels before using rented discs.  
!
!
!
!
46  
En  
About trademarks and registered  
trademarks  
Specifications  
Power consumption............................................................................... 37 W  
Power consumption (standby)............................................................. 0.4 W  
Main unit weight ...................................................................................4.7 kg  
External dimensions ...........320 mm (W) × 106.5 mm (H) × 405.7 mm (D)  
Tolerable operating temperature ........................................+5 °C to +35 °C  
Tolerable operating humidity ...................... 5 % to 85 % (no condensation)  
!
Pioneer and rekordbox are trademarks or registered trademarks of  
the PIONEER CORPORATION.  
!
Microsoft®, Windows Vista®, Windows® and Internet Explorer® are  
either registered trademarks or trademarks of Microsoft Corporation  
in the United States and/or other countries.  
!
!
Pentium is a registered trademark of Intel Corporation.  
Adobe and Reader are either registered trademarks or trademarks  
of Adobe Systems Incorporated in the United States and/or other  
countries.  
ASIO is a trademark of Steinberg Media Technologies GmbH.  
SD Logo is a trademark of SD-3C, LLC.  
Analog audio output (AUDIO OUT L/R)  
Output terminals...................................................................... RCA terminal  
Digital audio output (DIGITAL OUT)  
Output terminals...................................................................... RCA terminal  
Output type...............................................................Coaxial digital (S/PDIF)  
!
!
USB downstream section (USB)  
Port .......................................................................................................Type A  
Power supply........................................................................ 5 V/2.1 A or less  
USB upstream section (USB)  
Port .......................................................................................................Type B  
!
!
SDHC Logo is a trademark of SD-3C, LLC.  
LAN (PRO DJ LINK)  
Rating .......................................................................................... 100Base-TX  
Control output (CONTROL)  
Port .................................................................................................. Mini-jack  
SD memory card section  
File system............... Conforming to “SD Specifications Part 2 File System  
Specification Version 2.00”  
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean  
that an electronic accessory has been designed to connect specifi-  
cally to iPod, iPhone, or iPad, respectively, and has been certified  
by the developer to meet Apple performance standards. Apple is  
not responsible for the operation of this device or its compliance  
with safety and regulatory standards. Please note that the use  
of this accessory with iPod, iPhone, or iPad may affect wireless  
performance.  
Max. memory capacity..........................................................................32 GB  
Main display  
Display type ...........................Active matrix TFT liquid crystal display (LCD)  
Screen size ...............................................................................6.1-inch, wide  
Supported languages .............................................................. 18 languages  
!
The articles concerning free repairs, etc., indicated on the warranty  
do not apply to the rekordbox music management software. Before  
installing or using rekordbox, carefully read the articles in Software  
end user license agreement on page 8.  
!
!
The specifications and design of this product are subject to change  
without notice.  
© 2012 PIONEER CORPORATION.  
All rights reserved.  
PIONEER CORPORATION  
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan  
<DRI1052-A>  
!
Apple, iPad, iPod, iPod touch, iPhone, iTunes, Safari, Finder, Mac,  
Macintosh and Mac OS are trademarks of Apple Inc., registered in  
the U.S. and other countries.  
!
!
Androidis a trademark of Google Inc.  
IOS is a registered trademark or trademark of Cisco Systems, Inc.  
and its affiliates in the United States and certain other countries.  
Wi-Fi® is a registered mark of the Wi-Fi Alliance.  
!
About using MP3 files  
This product has been licensed for nonprofit use. This product has not  
been licensed for commercial purposes (for profit-making use), such  
as broadcasting (terrestrial, satellite, cable or other types of broadcast-  
ing), streaming on the Internet, Intranet (a corporate network) or other  
types of networks or distributing of electronic information (online digi-  
tal music distribution service). You need to acquire the corresponding  
The names of companies and products mentioned herein are the trade-  
marks of their respective owners.  
En  
47  

Transcend Information JETFLASH TS4GJF2C User Manual
Teac DV 28E V User Manual
Siemens C35i User Manual
Seagate Constellation ST32000647SS User Manual
Samsung SF 3100 User Manual
Samsung Cell Phone GT I9300 User Manual
Saeco Coffee Makers Coffee Maker Giro Plus User Manual
Research In Motion Blackberry Cell Phone 9300 Series User Manual
Pioneer PD F907 User Manual
Philips CD 600 User Manual