2
FM
MW
$
#
^
6 x R14 • UM-2 • C-CELLS
RADIO USB
-
LINE IN
!
%
7
3
8
4
5
PROG
6
X
ALL
English
Controls
Congratulations on your purchase and
welcome to Philips!
Back panel (See 1 and 2)
Source selector: CD, USB, RADIO, OFF
!
To fully benefit from the support that
Philips offers, register your product at
–
selects CD, USB or radio source of sound
–
power off switch
@ Telescopic antenna - improves FM recep-
tion.
Supplied Accessories
– AC power cord
# AC MAINS~ - inlet for power cord.
$
Band selector
–
selects wavebands: MW or
FM.
Top/front panels (See 1)
%
LINE-IN – inlet for external audio source.
1
2
VOLUME
–
adjusts volume level.
Bottom panel
43 – For MP3-CD/USB only: select albums.
^ Battery door – Press on the arrow and
push to insert 6 x 1.5V R-14/ UM-2/ C-
cells.
3 MODE – selects different play modes:
e.g. REPEAT or SHUFFLE (random
order)
starts or pause CD/USB playback
selects the next/previous track
.
4
2 ;
–
§
∞
–
CAUTION
– searches forwards/backwards (press
and hold the button) within the cur-
rent track
– Visible and invisible laser radia-
tion. If the cover is open, do not
look at the beam.
9
–
–
stops disc/USB playback;
erases a program
– High voltage! Do not open.You
run the risk of getting an electric
shock.The machine does not con-
tain any user-serviceable parts.
– Modification of the product
could result in hazardous radia-
tion of EMC or other unsafe oper-
ation.
5 PROG – programs tracks and reviews the
program
6 LIFTTO OPEN – opens/closes the CD
door.
7 TUNING – tunes to radio stations
8
9
Display
–
shows the CD/USB functions
DBB turns the bass enhancement on/off.
–
0 USB port – connects an external USB mass
storage device
.
Power Supply
General Operation
thunderstorms. Children could seriously
injure themselves as the free end of the cable
may still be live if only the connector is
removed from the MAINS socket at the back
of the unit.
Power Supply
Whenever convenient, use the power supply
cord if you want to conserve battery life.
Make sure you remove the plug from the set
and wall outlet before inserting batteries.
The type plate is located on the bottom
of the set.
Batteries (not included)
1
2
Open the battery door and insert 6 batteries,
type R-14, UM-2 or C-cells, (preferably
alkaline) with the correct polarity as indicated by
the "+" and "–" symbols inside the compartment.
Helpful hints:
–
To avoid unnecessary energy consumption,
always adjust the Source selector to OFF
after using the set.
Replace the battery door, making sure the
batteries are firmly and correctly in place.The
set is now ready to operate.
General operation
Batteries contain chemical substances,
so they should be disposed of properly.
Switching on and off and selecting the
function
•
•
Incorrect use of batteries can cause electrolyte
leakage and will corrode the compartment or
cause the batteries to burst:
Do not mix battery types: e.g. alkaline with
carbon zinc. Only use batteries of the same
type for the set.
When inserting new batteries, do not try to mix
old batteries with the new ones.
Remove the batteries if the set is not to be
used for a long time.
1
To select your sound source, adjust the
Source selector to: CD, USB or
RADIO.
2
3
To switch off the set, adjust the Source
selector to OFF position.
•
•
To switch to LINE IN mode, connect an
external audio source to the LINE-IN inlet.
Helpful hints:
•
The set switches to LINE IN mode
Using AC power
automatically when an external audio source
is connected, no matter the set is in CD,
USB or RADIO mode.
WARNING:Always check you have
completely switched off the set, before
you change or disconnect power supply.
•
The LINE-IN inlet is not for earphones.
1
2
Check if the power voltage, as shown on
the type plate located on the bottom
of the set, corresponds to your local power
supply. If it does not, consult your dealer or
service center.
Adjusting volume and sound
Adjust the sound with the VOLUME and
DBB controls.
Connect the power cord to the AC
MAINS~ inlet and the wall socket.The set is
now connected and ready for use.
3
4
To switch the set off completely, withdraw
the power cord from the wall socket.
Install the unit near the AC outlet and where
the AC power plug can be easily reached.
•
Disconnect the power cord from the wall
socket to protect your set during heavy
Tuner
MP3/WMA/CD Player
Radio reception
Playing a disc
1
2
Adjust the Source selector to RADIO.
•
•
This CD player plays Audio Discs including
CD-Recordables (CD-R), CD-Rewritables
(CD-RW) and MP3/WMA CD.
Adjust the band selector to select your
desired waveband: MW or FM.
CD-ROM, CD-I, CDV,VCD, DVD or
computer CDs are not possible for playback.
3
Turn TUNING to tune to a station.
IMPORTANT!
Helpful hints:
To improve radio reception
•
CDs encoded with copyright protection
technologies by some record companies
may be unplayable by this product.
•
For FM, extend, incline and turn the
telescopic antenna for best reception. Reduce
its length if the signal is too strong.
•
DRM-protected WMA disc is not support.
1
2
Adjust the Source selector to CD.
•
For MW, the set uses a built-in antenna.
Direct this antenna for best reception by
turning the whole set.
Open the CD door, and insert a CD with
the printed side facing up, then press the
CD door gently to close.
➜ Display shows ---, and later the total
About MP3
number of tracks. (See 3)
The music compression technology MP3
(MPEG1 Audio Layer 3) significantly reduce
the digital data of an audio CD while
maintaining CD quality sound.
3
4
Press 2; to start playback.
To pause playback, press 2;
Display: 2 flashes. (See 4)
To resume, press 2; again.
To stop playback, press
.
➜
•
•
Getting MP3 files: you can either download
legal music files from the internet to your
computer hard disc, or create such files by
converting audio CD files in your computer
through appropriate encoder software.
(128kbps bit rate or higher is recommended
for MP3 files.)
5
6
9.
Helpful hints:
CD play will also stop when:
–
–
–
you open the CD door;
you select USB RADIO or OFF
the CD has reached the end.
Creating an MP3 CD: burn the music files
from your computer hard disc on a CDR or
CDRW using your CD burner.
,
;
Helpful Hints:
– Make sure that the file names of the MP3 files
end with .mp3 .
– Total number of music files and albums: around
400 (with a typical file name length of 20
characters)
– The length of file names affects the number of
tracks for playback.With shorter file names, more
files can be burned on a disc.
MP3/WMA/CD Player
Helpful hints :
Selecting a different track
–
When playback of your program comes
to the stop position, your set will return
to normal playback.To re-enter
program mode, press PROG in the stop
position.
•
Press ∞/ § once or repeatedly until the
desired track number appears in the display.
For MP3/WMA-CD: First press 43 once
or more to select your album.
In the pause/stop position, press 2; to start
playback.
•
Reviewing the program
In the stop position, press PROG repeatedly
to see your stored tracks.
Finding a passage within a
track
During playback, press and hold ∞ or § .
➜ The CD is played at high speed and with
reduced volume.
Erasing a program
1
2
You can erase the contents of the memory
by:
When you recognize the passage you want,
release ∞ or § to resume normal playback.
– in the stop position, press PROG to enter
program mode, and then press 9.
Helpful hints:
– selecting USB
,
RADIO or OFF;
–
When your searching reaches the end of the
last track, the CD goes to stop mode.
– opening the CD door;
Programming track
numbers
You may store up to 20 tracks in the desired
sequence. If you like, store any track more
than once.
1
2
In the stop position, press PROG to
activate programming.
➜ Display: PROG and P01 flash. (See 5)
Press
∞
or
§
to select your desired track
number.
For MP3/WMA-CD: first press 43 once
or more to select your album.
3
4
Press PROG to store the desired track
number.
➜ Display: PROG and P02 flash for you
to program the next track.
Repeat steps 2 to 3 to select and store all
desired tracks in this way.
➜ If you attempt to store more than 20
tracks, no track can be selected and the
display shows ---.
5
To play your program, press
2/;.
MP3/WMA/CD Player
USB Connection
Different play modes:
REPEAT. and SHUFFLE
(See 6, 7)
You can select and change the various play
modes before or during playback, and
combine REPEAT modes with PROG (PRO-
GRAM).
Using USB connectivity
•
•
AZ382 is fitted with a USB port in the front
panel, offering a plug and play feature which
allows you to play, from your AZ382, digital
music and spoken contents stored on a USB
mass storage device.
Using a USB mass storage device, you can
also enjoy all the features offered by AZ382
which are explained and instructed in the
sections of disc operation.
– plays the current track continuously.
For MP3:
ALB –plays all tracks of current album
repeatedly.
– repeats the entire CD/program.
Compatible USB mass storage devices
With the AZ382, you can use
– USB flash memory (USB 2.0 or USB 1.1)
– USB flash player (USB 2.0 or USB 1.1)
– plays all tracks in random order.
1
To select play mode, press MODE once or
more.
➜ The display shows the related icon.
Press 2; to start playback if in the
stop/pause position.
To return to normal playback, press MODE
repeatedly until the modes are no longer
displayed.
– You can also press 9 to cancel your play
mode.
• USB device which requires driver
installation under Windows XP is not
supported.
2
3
Note:
In some USB flash players (or memory devices),
the stored contents are recorded using copyright
protection technology. Such protected contents
will be unplayable on any other devices (such as
AZ382 device).
Supported formats:
– USB or memory file format FAT12, FAT16,
FAT32 (sector size: 512 - 65,536 bytes)
– MP3 bit rate (data rate): 32-320 kbps and
variable bit rate
– WMA v9 or earlier
– Directory nesting up to a maximum of 8
levels
– Number of albums: maximum 99
– Number of tracks: maximum 511
– ID3 tag v2.0 or later
– File name in Uicode UTF8 (maximum
length: 128 bytes
USB Connection
The system will not play or support
the following:
• Empty albums: an empty album is an album
that does not contain MP3/WMA files, and
will not be shown in the display.
4
Press 2; on your AZ382 to start play.
➜ AZ382’s display will show the current
track number.
Helpful hints:
• Non-supported file formats are skipped.
This means that e.g.:Word documents .doc
or MP3 files with extension. dlf are ignored
and will not be played.
• AAC,WAV, PCM. NTFS audio files
• DRM protected WMA files
– Up to 511 playable audio files stored on a
USB mass storage device can be played on
AZ382.
– Up to 99 playable albums stored on a USB
mass storage device can be selected and
displayed on AZ382.
– Make sure that file names of MP3 files end
with .mp3. and the file names of WMA files end
with .wma.
– For DRM protected WMA files, use Windows
Media Player 10 (or later) for conversion.Visit
Media Player and WM DRM (Windows Media
Digital Rights Management).
• WMA files in Lossless format
Playing a USB mass storage device
Make sure that your AZ382 is being pow-
ered by AC mains or specified batteries.
1
2
3
Adjust the source selector to USB.
➜ Display shows - - - (see 2).
Plug a compatible USB mass storage device
to AZ382’s USB port marked
. If needed,
– For USB device playing, if the display shows
"OL", it means that the USB device is electrically
overloading AZ382.You need to change a USB
device.
use a suitable USB cable to connect
between the device and AZ382’s USB port.
➜ The device will automatically power on.
If the device is not powered on, turn on the
power manually, then re-connnect it.
➜ AZ382’s display shows - - - and then the
total number of playable audio files (Max.
displayed track number is 511) stored on
the device.
•
INFORMATION REGARDING USB DIRECT:
1. Compatibility of the USB connection on this product:
a) This product supports most USB Mass storage devices (MSD) that these devices are compliant to the
USB MSD standards.
i) Most common Mass storage class devices are flash drives, memory sticks, jump drives and etc.
ii) If you see a "Disc Drive" showing up on your computer after you have plugged the mass storage
device into your computer, most likely it is MSD compliant and it will work with this product.
b) If your Mass storage device requires a battery/power source, please make sure you have a fresh bat-
tery in it or charge the USB device first and then plug it into this product again.
2. Supported Music type:
a) This device only supports unprotected music with file extension: .mp3 .wma
b) Music bought from on-line music stores are not supported because they are secured by Digital Rights
Management protection (DRM).
c) File name extensions that ended with the following are not supported: .wav; .m4a; .m4p; .mp4; .aac
and etc.
3. No Direct connection can be made from a Computer USB port to this product even you have either or both
mp3 or wma file in your computer.
Maintenance & Safety (See 8)
CD player and CD handling
Safety information
•
If the CD player cannot read CDs correctly,
use a cleaning CD to clean the lens before
taking the set to repair.
•
•
Place the set on a flat, hard and stable surface
so that the system does not tilt.
Where the MAINS plug or an appliance cou-
pler is used as the disconnect device, the dis-
connect device shall remain readily operable.
•
•
The lens of the CD player should never be
touched!
Sudden changes in the surrounding
•
Do not expose the set, batteries, CDs to
humidity, rain, sand or excessive heat caused
by heating equipment or direct sunlight.
temperature can cause condensation on the
lens of your CD player. Playing a CD is then
not possible. Do not attempt to clean the
lens but leave the set in a warm environment
until the moisture evaporates.
•
•
The apparatus shall not be exposed to drip-
ping or splashing.
Adequate ventilation with a minimum gap of
15cm (6 inches) between the ventilation
holes and surrounding surfaces is necessary
to prevent heat build-up.
•
•
Always close the CD door to avoid dust on
the lens.
To clean the CD, wipe in a straight line from
the center towards the edge using a soft,
lint-free cloth. Do not use cleaning agents as
they may damage the disc.
•
Do not cover the ventilation openings with
items such as newspapers, table-cloths, cur-
tains, etc.
•
Never write on a CD or attach any stickers to it.
•
•
•
No objects filled with liquids, such as vases,
shall be placed on the apparatus.
No naked flame sources, such as lighted can-
dles, should be placed on the apparatus.
The mechanical parts of the set contain self-
lubricating bearings and must not be oiled or
lubricated.
•
To clean the set, use a dry cloth. Do not use
any cleaning agents containing alcohol, ammo-
nia, benzene or abrasives as these may harm
the housing.
Troubleshooting
If a fault occurs, first check the points listed below before taking the set for repair.
If you are unable to remedy a problem by following these hints, consult your dealer or service centre.
WARNING:
Do not open the set as there is a risk of electric shock. Under no
circumstances should you try to repair the set yourself, as this will
invalidate the guarantee.
Problem
Note:
Make sure the CD is not encoded with copy-
right protection technologies, as some do not
conform to the Compact Disc standard.
– Possible cause
• Remedy
No sound /power
The CD skips tracks
– Volume not adjusted
– CD damaged or dirty
• Adjust theVOLUME
• Replace or clean CD
– Power cord not securely connected
• Connect the AC power cord properly
– Batteries dead/ incorrectly inserted
• Insert (fresh) batteries correctly
– CD contains non-audio files
– Program/shuffle is active
• Quit program/shuffle mode
Note: A CD badly scratch or dirty may result in
improper operation.
• Press ∞ , § once or more to skip to a CD audio
track, instead of the data file.
Sound skips during MP3 playback
–
MP3 file made at compression level exceeding
320kbps
Display does not function properly / No reac-
tion to operation of any of the controls
• Use a lower compression level to record CD
tracks into MP3 format
– Electrostatic discharge
– Disc damaged or dirty
• Replace or clean disc
• Switch off and unplug the set. Reconnect after a
few seconds
The USB device doesn’t play on my
AZ382
---, Er or no indication
– It is not set in the USB mode.
– No CD inserted
•
Adjust the source selector to USB.
•
Insert a CD
– CD badly scratched or dirty
Replace/ clean CD, see Maintenance
– The device is not securely connected to AZ382’s USB
port.
• Re-connect the device, and make sure that the
device is powered on.
– The device is not supported by AZ382, or the audio
file format stored on the device is not supported by
AZ382.
• Use a compatible device/ playable audio file
format.
•
– Laser lens steamed up
• Wait until lens has cleared
– CD-R/CD-RW is blank or not finalized
•
Use a finalized CD-R/CD-RW or suitable CD
Audio disc only
Environmental information
All unnecessary packaging material has been omitted.The packaging can be easily separated
into three materials: cardboard, polystyrene and plastic.
Your set consists of materials which can be recycled if disassembled by a
specialized company. Please observe the local regulations regarding the
disposal of packaging, dead batteries and old equipment.
Specifications
Power Consumption............15W
Dimensions (w x h x d)....... 261 x 121 x 245 (mm)
Weight.................................. 1.63 kg
Meet Philips at the Internet
W
AZ382
CLASS 1
LASER PRODUCT
AZ382_61_UM_V2.0
Printed in China
|