Philips Clock Radio MCD122 User Manual

Rwegwistewr yo.upr hproildiupctsan.dcgoetmsup/pworteatlcome  
MCD122  
EN User manual  
3
=+ꢀ7:ꢁ Ԛ͂ʹ˫ꢀ  
29  
g Do not block any ventilation openings.  
Install in accordance with the  
1 Important  
manufacturer’s instructions.  
h Do not install near any heat sources such  
as radiators, heat registers, stoves, or  
ꢀꢁꢂꢃꢄꢅꢆꢇꢇꢆꢄꢆꢁꢈꢉꢅꢊꢋꢌꢍꢎꢈꢏꢋꢌꢐꢅꢆꢑꢇꢎꢋ\ꢃꢄꢉꢒꢅꢁꢂꢆꢁꢅ  
produce heat.  
Safety  
Know these safety symbols  
i Protect the power cord from being  
walked on or pinched, particularly at  
plugs, convenience receptacles, and the  
point where they exit from the apparatus.  
j Only use attachments/accessories  
ꢉꢇꢃꢍꢋ\ꢃꢏꢅꢓꢔꢅꢁꢂꢃꢅꢑꢆꢌꢈꢕꢆꢍꢁꢈꢄꢃꢖ  
k Use only with the cart, stand, tripod,  
ꢓꢄꢆꢍꢗꢃꢁꢀꢄꢅꢁꢆꢓꢎꢃꢅꢉꢇꢃꢍꢋ\ꢃꢏꢅꢓꢔꢅꢁꢂꢃꢅ  
manufacturer or sold with the apparatus.  
When a cart is used, use caution when  
moving the cart/apparatus combination to  
avoid injury from tip-over.  
This ‘bolt of lightning’ indicates uninsulated  
material within your unit may cause an electrical  
shock. For the safety of everyone in your  
household, please do not remove product  
covering.  
The ‘exclamation point’ calls attention to  
features for which you should read the enclosed  
literature closely to prevent operating and  
maintenance problems.  
ꢒꢓꢖꢗꢘꢗꢙꢚꢎꢕꢂꢜꢔꢃꢂꢎꢇ!ꢂꢎꢕꢄꢊ"ꢎꢈ#ꢎꢅꢕꢂꢎꢈꢕꢎꢂꢌꢂꢃꢇꢕꢄꢃꢎ  
shock, this apparatus should not be exposed to  
ꢕꢆꢄꢉꢎꢈꢕꢎ$ꢈꢄꢊꢇꢔꢕꢂꢎꢆꢉꢜꢎꢈ%&ꢂꢃꢇꢊꢎꢅꢌꢌꢂꢜꢎ'ꢄꢇ!ꢎꢌꢄ(ꢔꢄꢜꢊ)ꢎ  
such as vases, should not be placed on this  
apparatus.  
l Unplug this apparatus during lightning  
storms or when unused for long periods  
of time.  
mꢅ ꢙꢃꢕꢃꢄꢅꢆꢎꢎꢅꢉꢃꢄꢚꢋꢍꢋꢌꢐꢅꢁꢀꢅꢛꢈꢆꢎꢋ\ꢃꢏꢅꢉꢃꢄꢚꢋꢍꢃꢅ  
personnel. Servicing is required when  
the apparatus has been damaged in any  
way, such as power-supply cord or plug  
is damaged, liquid has been spilled or  
objects have fallen into the apparatus, the  
apparatus has been exposed to rain or  
moisture, does not operate normally, or  
has been dropped.  
CAUTION:To prevent electric shock, match  
wide blade of plug to wide slot, fully insert.  
Important Safety Instructions  
a Read these instructions.  
b Keep these instructions.  
c Heed all warnings.  
n Battery usage CAUTION To prevent  
battery leakage which may result in bodily  
injury, property damage, or damage to the  
unit:  
d Follow all instructions.  
e Do not use this apparatus near water.  
f Clean only with dry cloth.  
#ꢎ Install all batteries correctly, + and - as  
marked on the unit.  
4
EN  
#ꢎ Do not mix batteries (old and new or  
carbon and alkaline, etc.).  
#ꢎ Remove batteries when the unit is not  
used for a long time.  
Hearing safety  
Listen at a moderate volume.  
#ꢎ Using headphones at a high volume can  
impair your hearing.This product can  
produce sounds in decibel ranges that may  
cause hearing loss for a normal person,  
even for exposure less than a minute.The  
higher decibel ranges are offered for those  
that may have already experienced some  
hearing loss.  
#ꢎ Sound can be deceiving. Over time your  
hearing ‘comfort level’ adapts to higher  
volumes of sound. So after prolonged  
listening, what sounds ‘normal’ can actually  
be loud and harmful to your hearing.To  
guard against this, set your volume to a safe  
level before your hearing adapts and leave  
it there.  
o Apparatus shall not be exposed to  
dripping or splashing.  
p Do not place any sources of danger on  
ꢁꢂꢃꢅꢆꢇꢇꢆꢄꢆꢁꢈꢉꢅꢊꢃꢖꢐꢎꢋꢛꢈꢋꢏꢅ\ꢎꢎꢃꢏꢅꢀꢓꢜꢃꢍꢁꢉꢅ  
ꢎꢋꢐꢂꢁꢃꢏꢅꢍꢆꢌꢏꢎꢃꢉꢒꢅ  
q This product may contain lead and  
mercury. Disposal of these materials  
may be regulated due to environmental  
considerations. For disposal or recycling  
information, please contact your local  
authorities or the Electronic Industries  
Caution  
To establish a safe volume level:  
#ꢎ Set your volume control at a low setting.  
#ꢎ Slowly increase the sound until you can  
hear it comfortably and clearly, without  
distortion.  
# Use of controls or adjustments or performance of  
procedures other than herein may result in hazardous  
radiation exposure or other unsafe operation.  
Listen for reasonable periods of time:  
#ꢎ Prolonged exposure to sound, even at  
normally ‘safe’ levels, can also cause hearing  
loss.  
#ꢎ *ꢂꢎꢊꢔꢕꢂꢎꢇꢈꢎꢔꢊꢂꢎꢍꢈꢔꢕꢎꢂ(ꢔꢄꢁ$ꢂꢉꢇꢎꢕꢂꢆꢊꢈꢉꢆ%ꢌꢍꢎ  
and take appropriate breaks.  
Warning  
# Where the MAINS plug or an appliance coupler is used  
as the disconnect device, the disconnect device shall  
remain readily operable.  
Be sure to observe the following guidelines  
when using your headphones.  
Warning  
#ꢎ Listen at reasonable volumes for  
reasonable periods of time.  
# Never remove the casing of this unit.  
# Never lubricate any part of this unit.  
# ꢋꢌꢆꢃꢂꢎꢇ!ꢄꢊꢎꢔꢉꢄꢇꢎꢈꢉꢎꢆꢎ]ꢆꢇ)ꢎ!ꢆꢕꢜꢎꢆꢉꢜꢎꢊꢇꢆ%ꢌꢂꢎꢊꢔꢕ#ꢆꢃꢂ;  
# ꢗꢂ@ꢂꢕꢎꢁꢌꢆꢃꢂꢎꢇ!ꢄꢊꢎꢔꢉꢄꢇꢎꢈꢉꢎꢈꢇ!ꢂꢕꢎꢂꢌꢂꢃꢇꢕꢄꢃꢆꢌꢎꢂ(ꢔꢄꢁ$ꢂꢉꢇ;  
# Only use this unit indoors. Keep this unit away from  
'ꢆꢇꢂꢕ)ꢎ$ꢈꢄꢊꢇꢔꢕꢂꢎꢆꢉꢜꢎꢌꢄ(ꢔꢄꢜHꢅꢌꢌꢂꢜꢎꢈ%&ꢂꢃꢇꢊ;  
#ꢎ Be careful not to adjust the volume as your  
hearing adapts.  
#ꢎ Do not turn up the volume so high that  
you can’t hear what’s around you.  
#ꢎ You should use caution or temporarily  
discontinue use in potentially hazardous  
situations. Do not use headphones while  
operating a motorized vehicle, cycling,  
ꢊ"ꢆꢇꢂ%ꢈꢆꢕꢜꢄꢉ/)ꢎꢂꢇꢃ;<ꢎꢄꢇꢎ$ꢆꢍꢎꢃꢕꢂꢆꢇꢂꢎꢆꢎꢇꢕꢆ#ꢅꢃꢎ  
hazard and is illegal in many areas.  
# Jꢂꢂꢁꢎꢇ!ꢄꢊꢎꢔꢉꢄꢇꢎꢆ'ꢆꢍꢎ#ꢕꢈ$ꢎꢜꢄꢕꢂꢃꢇꢎꢊꢔꢉꢌꢄ/!ꢇ)ꢎꢉꢆ"ꢂꢜꢎ]ꢆ$ꢂꢊꢎ  
or heat.  
# Never look into the laser beam inside the unit.  
EN  
5
This apparatus includes this label:  
Notice  
ꢓꢉꢍꢎꢃ!ꢆꢉ/ꢂꢊꢎꢈꢕꢎ$ꢈꢜꢄꢅꢃꢆꢇꢄꢈꢉꢊꢎ$ꢆꢜꢂꢎꢇꢈꢎꢇ!ꢄꢊꢎ  
device that are not expressly approved by  
Philips Consumer Lifestyle may void the user’s  
ꢆꢔꢇ!ꢈꢕꢄꢇꢍꢎꢇꢈꢎꢈꢁꢂꢕꢆꢇꢂꢎꢇ!ꢂꢎꢂ(ꢔꢄꢁ$ꢂꢉꢇ;  
Environmental information  
All unnecessary packaging has been omitted.  
We have tried to make the packaging easy to  
separate into three materials: cardboard (box),  
polystyrene foam (buffer) and polyethylene  
(bags, protective foam sheet.)  
Note  
# The type plate is located on the bottom of the  
apparatus.  
Your system consists of materials which can  
be recycled and reused if disassembled by  
a specialized company. Please observe the  
local regulations regarding the disposal of  
packaging materials, exhausted batteries and old  
ꢂ(ꢔꢄꢁ$ꢂꢉꢇ;  
The making of unauthorized copies of copy-  
protected material, including computer  
ꢁꢕꢈ/ꢕꢆ$ꢊ)ꢎꢅꢌꢂꢊ)ꢎ%ꢕꢈꢆꢜꢃꢆꢊꢇꢊꢎꢆꢉꢜꢎꢊꢈꢔꢉꢜꢎ  
recordings, may be an infringement of  
copyrights and constitute a criminal offence.  
ꢛ!ꢄꢊꢎꢂ(ꢔꢄꢁ$ꢂꢉꢇꢎꢊ!ꢈꢔꢌꢜꢎꢉꢈꢇꢎ%ꢂꢎꢔꢊꢂꢜꢎ#ꢈꢕꢎꢊꢔꢃ!ꢎ  
purposes.  
‘DVDVideo’ is a trademark of DVD Format/  
Logo Licensing Corporation.  
Manufactured under license from Dolby  
Laboratories. Dolby and the double-D symbol  
are trademarks of Dolby Laboratories.  
6
EN  
You can play DVD discs with the following  
region codes:  
2 Your DVD  
MicroTheater  
DVD region code Countries  
ꢓꢊꢄꢆꢎꢋꢆꢃꢄꢅꢃ)ꢄ'ꢆꢉ)ꢎJꢈꢕꢂꢆ  
Congratulations on your purchase, and  
'ꢂꢌꢃꢈ$ꢂꢎꢇꢈꢎꢋ!ꢄꢌꢄꢁꢊ\#ꢔꢌꢌꢍꢎ%ꢂꢉꢂꢅꢇꢎ#ꢕꢈ$ꢎꢇ!ꢂꢎ  
support that Philips offers, register your product  
at www.Philips.com/welcome.  
Australia, New Zealand  
Introduction  
What’s in the box  
With this unit, you can:  
#ꢎ watch video from DVD/VCD/SVCD or  
USB devices  
#ꢎ enjoy audio from discs or USB devices  
#ꢎ view pictures from discs or USB devices  
#ꢎ Listen to FM radio  
You can enrich sound output with these  
sound effects:  
#ꢎ Digital Sound Control (DSC)  
#ꢎ Dynamic Bass Boost (DBB)  
#ꢎ Bass/treble enhancement  
Check and identify the contents of your  
package:  
#ꢎ Main unit  
#ꢎ 2 speakers  
#ꢎ Remote control with battery  
#ꢎ Composite video cable (yellow)  
#ꢎ Power cord  
#ꢎ FM wire antenna  
#ꢎ User manual  
#ꢎ Quick start guide  
The unit supports these media/disc formats:  
Recordable  
ReWritable  
EN  
7
Overview of the main unit  
a
b
c
d
e f g h ijk  
o
n
m
l
h DBB  
a
#ꢎ Turn on or off dynamic bass  
enhancement.  
#ꢎ Turn on the apparatus; switch to  
standby mode.  
i
j
b VOLUME /  
#ꢎ Adjust volume.  
#ꢎ Adjust time.  
#ꢎ Start or pause play.  
#ꢎ Stop play.  
#ꢎ In demo mode, activate or deactivate  
demonstration.  
c SOURCE  
#ꢎ Select a source.  
d Display panel  
k MODE  
#ꢎ Select repeat play modes.  
#ꢎ ꢀꢂꢌꢂꢃꢇꢎꢊ!ꢔ#]ꢂꢎꢁꢌꢆꢍꢎ$ꢈꢜꢂꢊ;  
#ꢎ Display current status.  
e
#ꢎ Open or close the disc compartment.  
l MP3-LINK  
f Remote control sensor  
#ꢎ Jack for an external audio device.  
g
/
m
#ꢎ Skip to the previous/next track.  
#ꢎ Skip to the previous/next title or  
chapter.  
#ꢎ Headphone socket.  
n USB DIRECT  
#ꢎ USB socket.  
#ꢎ Select a preset radio station.  
o Disc compartment  
8
EN  
b Source selection keys  
Overview of the remote  
control  
#ꢎ Select a source.  
c DISPLAY/RDS (RDS function unavailable  
ꢕꢀꢄꢅꢁꢂꢋꢉꢅꢚꢃꢄꢉꢋꢀꢌꢒ  
#ꢎ Display play information on a  
connectedTV.  
a
d DISC MENU  
#ꢎ For video discs: access or exit the disc  
menu.  
#ꢎ For video discs with playback  
control(PBC): turn on/off PBC.  
b
c
x
d
e
e AUDIO  
w
v
#ꢎ ForVCD, select stereo, mono-left or  
mono-right channel.  
#ꢎ For DVD/DivX video, select an audio  
language.  
u
f
f
g
/
#ꢎ Search within a track.  
#ꢎ Tune to a radio station.  
#ꢎ For menus, navigate left/right.  
#ꢎ Move an enlarged image left/right.  
#ꢎ Rotate or invert pictures.  
g
h
t
s
SLOW/ ZOOM  
r
q
i
#ꢎ For menus, navigate up/down.  
#ꢎ Rotate or invert pictures.  
#ꢎ ( SLOW) For video: select a slow  
play mode.  
j
#ꢎ ( ZOOM) For video: zoom in/out.  
k
l
h LOUD/DBB  
p
o
#ꢎ Turn on or off automatic loudness  
adjustment.  
m
n
#ꢎ Turn on or off dynamic bass  
enhancement.  
i VOL +/-  
#ꢎ Adjust volume.  
#ꢎ Adjust time.  
j MUTE  
#ꢎ Mute or restore volume.  
a
k CLOCK  
#ꢎ Set the clock.  
#ꢎ Turn on the apparatus; switch to  
standby mode.  
EN  
9
l SLEEP/TIMER  
#ꢎ Set the sleep timer.  
#ꢎ Set the alarm timer.  
3 Connect  
m SUBTITLE  
#ꢎ Select a subtitle language.  
Place the unit  
n GOTO  
#ꢎ During disc play, specify a position to  
start play.  
o ANGLE/PROG  
#ꢎ Select a DVD camera angle.  
#ꢎ Program radio stations.  
p Numeric keypad  
#ꢎ Select a title/chapter/track directly.  
q
#ꢎ Stop play.  
r
s
/
1 Place the unit near to theTV.  
#ꢎ Skip to the previous/next track.  
#ꢎ Skip to the previous/next title or  
chapter.  
2ꢎ ꢋꢌꢆꢃꢂꢎꢇ!ꢂꢎꢌꢂ#ꢇꢎꢆꢉꢜꢎꢕꢄ/!ꢇꢎꢊꢁꢂꢆ"ꢂꢕꢊꢎꢆꢇꢎꢂ(ꢔꢆꢌꢎ  
distance from theTV and at an angle  
of approximately 45 degrees from the  
listening position.  
#ꢎ Select a preset radio station.  
#ꢎ Start or pause play.  
Note  
t DSC  
#ꢎ Select a preset sound setting.  
# To avoid magnetic interference or unwanted noise,  
never place this apparatus and speakers too close to  
any radiation devices.  
# Never place this unit in an enclosed cabinet.  
# Install this unit near the AC outlet where the AC power  
plug can be easily reached.  
u OK  
#ꢎ `ꢈꢉꢅꢕ$ꢎꢆꢎꢊꢂꢌꢂꢃꢇꢄꢈꢉ;  
v A-B  
#ꢎ ꢖꢂꢁꢂꢆꢇꢎꢆꢎꢊꢁꢂꢃꢄꢅꢃꢎꢊꢂꢃꢇꢄꢈꢉꢎ'ꢄꢇ!ꢄꢉꢎꢆꢎ  
track/disc.  
w SYSTEM MENU  
Connect speakers  
#ꢎ Access or exit the system setup menu.  
x MODE/DIM  
#ꢎ Select repeat play modes.  
#ꢎ ꢀꢂꢌꢂꢃꢇꢎꢊ!ꢔ#]ꢂꢎꢁꢌꢆꢍꢎ$ꢈꢜꢂꢊ;  
#ꢎ Select a brightness level for the display  
screen.  
Note  
# Ensure that the colors of the speaker wires and  
terminals are matched.  
# For optimal sound, use the supplied speakers only.  
# Connect only speakers with impedance that is the  
same or higher than the supplied speakers. Refer to the  
ꢀꢁꢂꢃꢄꢅꢃꢆꢇꢄꢈꢉꢊꢎꢊꢂꢃꢇꢄꢈꢉꢎꢈ#ꢎꢇ!ꢄꢊꢎ$ꢆꢉꢔꢆꢌ;  
10 EN  
1ꢎ qꢈꢌꢜꢎꢜꢈ'ꢉꢎꢇ!ꢂꢎꢊꢈꢃ"ꢂꢇꢎ]ꢆꢁ;  
ConnectTV  
2 Insert the stripped part of the wire  
completely.  
#ꢎ Insert the right speaker wires to “R”,  
left speaker wires to “L”.  
#ꢎ Insert the red wires to “+”, black wires  
to “-”.  
Connect video cables  
With this connection, you can watch video from  
the unit on theTV screen.  
You can select the best video connection that  
yourTV supports.  
#ꢎ Option 1: Connect through SCART (for a  
standardTV).  
3ꢎ ꢖꢂꢌꢂꢆꢊꢂꢎꢇ!ꢂꢎꢊꢈꢃ"ꢂꢇꢎ]ꢆꢁ;  
#ꢎ Option 2: connect through component  
video (for a standardTV or Progressive  
ScanTV).  
#ꢎ Option 3: connect through S-Video (for a  
standardTV).  
a
b
c
#ꢎ Option 4: connect through composite  
video (CVBS) (for a standardTV).  
Connect FM antenna  
Option 1: Connect through  
component video  
8
Connect a progressive scanTV through  
ꢃꢈ$ꢁꢈꢉꢂꢉꢇꢎ@ꢄꢜꢂꢈꢎ#ꢈꢕꢎ!ꢄ/!ꢂꢕꢎ(ꢔꢆꢌꢄꢇꢍꢎ@ꢄꢜꢂꢈ;  
8
TV  
Tip  
Pr/Cr  
Pb/Cb  
Y
COMPONENTVIDEO IN PUT  
# For optimal reception, fully extend and adjust the  
position of the antenna.  
# For better FM stereo reception, connect an outdoor  
FM antenna to the FM AERIAL jack.  
# The unit does not support MW radio reception.  
1 Connect the supplied FM wire antenna to  
the FM AERIAL socket on the unit.  
EN 11  
Note  
Option 3: Connect through  
composite video  
# ꢛ!ꢂꢎꢁꢕꢈ/ꢕꢂꢊꢊꢄ@ꢂꢎꢊꢃꢆꢉꢎ@ꢄꢜꢂꢈꢎ(ꢔꢆꢌꢄꢇꢍꢎꢄꢊꢎꢈꢉꢌꢍꢎꢆ@ꢆꢄꢌꢆ%ꢌꢂꢎ  
when a progressive scanTV is connected.  
# If yourTV does not support progressive scan, you  
cannot view the picture.  
8
# For how to activate progressive scan on yourTV, refer  
to theTV user manual.  
Connect a progressive scanTV through  
TV  
ꢃꢈ$ꢁꢈꢉꢂꢉꢇꢎ@ꢄꢜꢂꢈꢎ#ꢈꢕꢎ!ꢄ/!ꢂꢕꢎ(ꢔꢆꢌꢄꢇꢍꢎ@ꢄꢜꢂꢈ;  
1 Connect component video cables (red/  
blue/green - not supplied) to:  
#ꢎ the VIDEO OUT (Pr/Cr Pb/CbY)  
sockets on this unit.  
#ꢎ the component input sockets on the  
TV.  
Option 2: Connect through S-Video  
1 Connect the supplied composite video  
cable to:  
8
#ꢎ the VIDEO OUT socket on this unit.  
#ꢎ the video input socket on theTV.  
Connect audio cables  
TV  
8
S-VIDEO IN  
TV  
1 Connect an S-video cable (not supplied)  
to:  
L AUDIO OUT R  
#ꢎ the S-Video socket on this unit.  
#ꢎ the S-Video socket on theTV.  
1 To play sound from theTV through this  
unit, connect audio cables (red/white - not  
supplied) to:  
#ꢎ the AUX IN L/R sockets on this unit.  
#ꢎ the audio output sockets on theTV.  
12 EN  
4 Get started  
Connect power  
8
Caution  
# Use of controls or adjustments or performance of  
procedures other than herein may result in hazardous  
radiation exposure or other unsafe operation.  
Always follow the instructions in this chapter in  
ꢊꢂ(ꢔꢂꢉꢃꢂ;  
If you contact Philips, you will be asked for the  
model and serial number of this apparatus.The  
model number and serial number are on the  
bottom of the apparatus.Write the numbers  
here:  
Model No. ____________________________  
Serial No. _____________________________  
Caution  
# Risk of product damage! Ensure that the power supply  
voltage corresponds to the voltage printed on the back  
or the underside of the unit.  
# Before connecting the AC power cord, ensure you have  
completed all other connections.  
Prepare the remote control  
1 Connect the AC power cord to the wall  
Caution  
socket.  
# Risk of explosion! Keep batteries away from heat,  
ꢊꢔꢉꢊ!ꢄꢉꢂꢎꢈꢕꢎꢅꢕꢂ;ꢎꢗꢂ@ꢂꢕꢎꢜꢄꢊꢃꢆꢕꢜꢎ%ꢆꢇꢇꢂꢕꢄꢂꢊꢎꢄꢉꢎꢅꢕꢂ;  
!ꢀꢄꢅ\ꢄꢉꢁ"ꢁꢋꢑꢃꢅꢈꢉꢃ#ꢅ  
1 Remove the protective tab to activate the  
remote control battery.  
To replace the remote control batteries:  
1 Open the battery compartment.  
2 Insert one lithium CR2025 battery with  
correct polarity (+/-) as indicated.  
3 Close the battery compartment.  
Note  
# Before you press any function button on the remote  
ꢃꢈꢉꢇꢕꢈꢌ)ꢎꢅꢕꢊꢇꢎꢊꢂꢌꢂꢃꢇꢎꢇ!ꢂꢎꢃꢈꢕꢕꢂꢃꢇꢎꢊꢈꢔꢕꢃꢂꢎ'ꢄꢇ!ꢎꢇ!ꢂꢎꢕꢂ$ꢈꢇꢂꢎ  
control.  
# If you are not going to use the remote control for a  
long time, remove the battery.  
EN 13  
3 Turn on theTV and switch to the correct  
video-in channel in one of the following  
ways:  
Set clock  
1 In the standby mode, press and hold  
CLOCK to activate the clock setting  
mode.  
#ꢎ Go to the lowest channel on yourTV,  
then press the Channel Down button  
until you see the blue screen.  
#ꢎ Press the source button repeatedly on  
the remote control of yourTV.  
» The hour digits are displayed and begin  
to blink.  
2 Press +VOL - to set the hour, then press  
CLOCK again.  
Tip  
» The minute digits are displayed and  
begin to blink.  
# The video-in channel is between the lowest and highest  
channels and may be called FRONT,A/V IN,VIDEO etc.  
See theTV user manual on how to select the correct  
input on theTV.  
3 Press +VOL - to set the minute.  
4 Press CLOCKꢎꢇꢈꢎꢃꢈꢉꢅꢕ$ꢎꢇ!ꢂꢎꢃꢌꢈꢃ"ꢎꢊꢂꢇꢇꢄꢉ/;  
Turn on  
Select the correctTV system  
1 Press .  
Change this setting if the video does not appear  
correctly. By default, this setting matches the  
most common setting forTVs in your country.  
» The unit switches to the last selected  
source.  
1 Press SYSTEM MENU.  
Switch to standby mode  
2 Select [Video Setup].  
1 Plug in AC power.  
3 Select [TV System] and then press  
.
» The unit will go to Eco Power Standby.  
4 Select a setting and then press OK.  
2 Long press .  
#ꢎ [NTSC] - ForTV with NTSC color  
system.  
» Switch the unit from Eco Power  
Standby mode to Standby mode.  
#ꢎ [PAL] - ForTV with PAL color system.  
#ꢎ [Multi] - ForTV that is compatible  
with both PAL and NTSC.  
Tip  
5 To exit the menu, press SYSTEM MENU.  
# In the Eco Power mode, you can press CLOCK key to  
switch to the standby mode and view the clock (if set).  
Change system menu  
language  
Find the correct viewing  
channel  
1 Press SYSTEM MENU.  
2 Select [General Setup].  
3 Select [OSD language] and then press  
4 Select a setting and then press OK.  
5 To exit the menu, press SYSTEM MENU.  
.
1 Press to turn on the unit.  
2 Press DISC to switch to disc mode.  
14 EN  
5 Play  
Turn on Progressive Scan  
Progressive scan displays twice the number of  
frames per seconds than interlaced scanning  
(ordinaryTV system).With nearly double the  
number of lines, progressive scan offers higher  
ꢁꢄꢃꢇꢔꢕꢂꢎꢕꢂꢊꢈꢌꢔꢇꢄꢈꢉꢎꢆꢉꢜꢎ(ꢔꢆꢌꢄꢇ;  
Note  
# ꢒꢄꢇ!ꢎꢊꢈ$ꢂꢎꢜꢄꢊꢃꢑꢅꢌꢂꢎꢇꢍꢁꢂꢊ)ꢎꢁꢌꢆꢍꢎ$ꢆꢍꢎꢜꢄ##ꢂꢕ;  
Before you turn on this feature, ensure that:  
#ꢎ TheTV supports progressive scan signals.  
#ꢎ You have connected this unit with theTV  
through component video.  
Play a disc  
1 Turn on theTV.  
Caution  
2 Ensure that theTV progressive scan mode  
is deactivated (see theTV user manual).  
# Never look at the laser beam inside the unit.  
# Risk of product damage! Never play discs with  
accessories such as disc stabilizer rings or disc  
treatment sheets.  
3 Switch theTV to the correct viewing  
channel for this unit.  
# Never put any objects other than discs into the disc  
4 Press DISC.  
compartment.  
5 Press SYSTEM MENU.  
6 Press / to select [Video Setup] in the  
1 Press DISC to select the DISC source.  
menu, then press  
.
2 Press on the front panel.  
7 Select [ComponentVideo], then press  
.
» The disc tray opens.  
8 Select [P-Scan], then press OK.  
3 Place a disc onto the tray and press .  
» The progressive setup is complete.  
» Ensure that the label faces up.  
4 Play starts automatically.  
#ꢎ To stop play, press .  
#ꢎ To pause or resume play, press  
#ꢎ To skip to the previous/next title/  
chapter/track, press / .  
.
If play does not start automatically:  
#ꢎ Select a title/chapter/track and then  
press  
.
Tip  
# To play a locked DVD, enter the 4-digit parental control  
password.  
Use the disc menu  
When you load a DVD/(S)VCD disc, a menu  
may be displayed on theTV screen.  
EN 15  
To access or exit the menu manually:  
Play from USB  
1 Press DISC MENU.  
!ꢀꢄ$%&ꢅ'ꢋꢁꢂꢅ)ꢎꢆꢔ*ꢆꢍꢗꢅ%ꢀꢌꢁꢄꢀꢎꢅꢊ)*%ꢒꢅꢕꢃꢆꢁꢈꢄꢃꢅ  
ꢊꢚꢃꢄꢉꢋꢀꢌꢅ;ꢖ<ꢅꢀꢌꢎꢔꢒ#  
Note  
With the PBC feature, you can playVCD  
interactively according to the menu screen.  
# Ensure that the USB device contains playable music,  
pictures or video.  
1 During play, press DISC MENU to enable/  
disable PBC.  
1 Insert the USB device.  
» When PBC is enabled, the menu  
screen is displayed.  
» When PBC is disabled, normal play is  
resumed.  
Select an audio language  
You can select an audio language on DVDs or  
DiVx video.  
1 During disc play, press AUDIO.  
» The language options appear. If the  
selected audio channels is unavailable,  
the default disc audio channel is used.  
2 Press USB to select the USB source.  
Note  
3 Press / to select a folder, then press OK  
# For some DVDs, the language can only be changed  
from the disc menu. Press DISC MENU to access the  
menu.  
ꢇꢈꢎꢃꢈꢉꢅꢕ$;  
4 Press / ꢎꢇꢈꢎꢊꢂꢌꢂꢃꢇꢎꢆꢎꢅꢌꢂꢎ#ꢕꢈ$ꢎꢇ!ꢂꢎ#ꢈꢌꢜꢂꢕ;  
5 Press  
to start play.  
#ꢎ To stop play, press .  
#ꢎ To pause or resume play, press  
.
Select a subtitle language  
You can select a subtitle language on DVDs or  
DivX® Ultra discs.  
#ꢎ During play, press SUBTITLE.  
#ꢎ ꢎꢊ"ꢄꢁꢎꢇꢈꢎꢇ!ꢂꢎꢁꢕꢂ@ꢄꢈꢔꢊꢑꢉꢂ}ꢇꢎꢅꢌꢂ)ꢎꢁꢕꢂꢊꢊꢎ  
/ .  
#ꢎ To return to the upper-level menu,  
press DISC MENU, and then press  
OK ꢇꢈꢎꢃꢈꢉꢅꢕ$;  
Tip  
# For some DVDs, the language can only be changed  
from the disc menu. Press DISC MENU to access the  
menu.  
Play DivX video  
~ꢔꢎꢃꢆꢉꢎꢁꢌꢆꢍꢎꢄ@€ꢎꢅꢌꢂꢊꢎꢃꢈꢁꢄꢂꢜꢎꢈꢉꢇꢈꢎꢆꢎ`Hꢖꢑ  
RW, recordable DVD or USB device.  
1 Insert a disc or connect a USB device.  
2 Select a source:  
#ꢎ For discs, press DISC.  
#ꢎ For USB devices, press USB.  
16 EN  
3ꢎ ꢀꢂꢌꢂꢃꢇꢎꢆꢎꢅꢌꢂꢎꢇꢈꢎꢁꢌꢆꢍꢎꢆꢉꢜꢎꢁꢕꢂꢊꢊꢎ  
.
Play control  
#ꢎ To stop play, press .  
#ꢎ To pause or resume play, press  
.
=ꢃꢎꢃꢍꢁꢅꢄꢃꢇꢃꢆꢁ>ꢉꢂꢈꢕ]ꢃꢅꢇꢎꢆꢔꢅꢀꢇꢁꢋꢀꢌꢉ  
1 During play, press MODE/DIM repeatedly  
ꢇꢈꢎꢊꢂꢌꢂꢃꢇꢎꢆꢎꢕꢂꢁꢂꢆꢇꢎꢈꢁꢇꢄꢈꢉꢎꢈꢕꢎꢇ!ꢂꢎꢊ!ꢔ#]ꢂꢎꢁꢌꢆꢍꢎ  
mode.  
#ꢎ To change a subtitle language, press  
SUBTITLE.  
Note  
#ꢎ To resume normal play, press MODE/  
DIM repeatedly until no option is  
displayed.  
# You can only play DivX videos rented or purchased  
through the DivX registration code of this unit.  
# ꢀꢔ%ꢇꢄꢇꢌꢂꢎꢅꢌꢂꢊꢎ'ꢄꢇ!ꢎꢇ!ꢂꢎ#ꢈꢌꢌꢈ'ꢄꢉ/ꢎꢅꢌꢂꢉꢆ$ꢂꢎꢂ}ꢇꢂꢉꢊꢄꢈꢉꢊꢎ‚;ꢊꢕꢇ)ꢎ  
.smi, .sub, .ssa, .ass) are supported but do not appear on  
ꢇ!ꢂꢎꢅꢌꢂꢎꢉꢆ@ꢄ/ꢆꢇꢄꢈꢉꢎ$ꢂꢉꢔ;  
# ꢛ!ꢂꢎꢊꢔ%ꢇꢄꢇꢌꢂꢎꢅꢌꢂꢉꢆ$ꢂꢎ!ꢆꢊꢎꢇꢈꢎ%ꢂꢎꢇ!ꢂꢎꢊꢆ$ꢂꢎꢆꢊꢎꢇ!ꢂꢎꢅꢌꢂꢎ  
Repeat A-B (DVD/VCD/CD/MP3/  
@JQꢒ  
name of the video.  
1 During music or video play, press A-B at  
the start point.  
2 Press A-B at the end point.  
» The selected section starts to play  
repeatedly.  
)ꢎꢆꢔꢅJ)\>@JQ>ꢇꢋꢍꢁꢈꢄꢃꢅ\ꢎꢃꢉ  
~ꢔꢎꢃꢆꢉꢎꢁꢌꢆꢍꢎꢏꢋꢐꢑꢒꢏꢓꢑꢁꢄꢃꢇꢔꢕꢂꢎꢅꢌꢂꢊꢎꢃꢈꢁꢄꢂꢜꢎ  
onto a CD-R/RW, recordable DVD or USB  
device.  
#ꢎ To cancel repeat play, press A-B again.  
Note  
1 Insert a disc or connect a USB device.  
2 Select a source:  
# The section A and B can be set only within the same  
track/title.  
#ꢎ For discs, press DISC.  
#ꢎ For USB devices, press USB.  
3 Press / to select a folder, then press OK  
ꢇꢈꢎꢃꢈꢉꢅꢕ$;  
Search forward/backward  
4 Press / ꢎꢇꢈꢎꢊꢂꢌꢂꢃꢇꢎꢆꢎꢅꢌꢂꢎ#ꢕꢈ$ꢎꢇ!ꢂꢎ#ꢈꢌꢜꢂꢕ;  
1 During play, press  
/
repeatedly to  
5 Press  
to start play.  
select a search speed.  
#ꢎ To stop play, press .  
#ꢎ To resume play at normal speed, press  
.
#ꢎ To pause or resume play, press  
.
#ꢎ ꢎꢊ"ꢄꢁꢎꢇꢈꢎꢇ!ꢂꢎꢁꢕꢂ@ꢄꢈꢔꢊꢑꢉꢂ}ꢇꢎꢅꢌꢂ)ꢎꢁꢕꢂꢊꢊꢎ  
/ .  
Search by time or chapter/track  
number  
1 During video/audio play, press GOTO  
ꢔꢉꢇꢄꢌꢎꢆꢎꢇꢄ$ꢂꢎꢅꢂꢌꢜꢎꢈꢕꢎꢃ!ꢆꢁꢇꢂꢕꢑꢇꢕꢆꢃ"ꢎꢅꢂꢌꢜꢎꢄꢊꢎ  
displayed.  
#ꢎ To return to the upper-level menu,  
press DISC MENU, and then press  
OK ꢇꢈꢎꢃꢈꢉꢅꢕ$;  
#ꢎ ꢈꢕꢎꢇ!ꢂꢎꢇꢄ$ꢂꢎꢅꢂꢌꢜ)ꢎꢂꢉꢇꢂꢕꢎꢇ!ꢂꢎꢁꢌꢆꢍꢎ  
position in hours, minutes and  
seconds.  
#ꢎ ꢈꢕꢎꢇ!ꢂꢎꢃ!ꢆꢁꢇꢂꢕꢑꢇꢕꢆꢃ"ꢎꢅꢂꢌꢜ)ꢎꢂꢉꢇꢂꢕꢎꢇ!ꢂꢎ  
chapter/track.  
EN 17  
#ꢎ Play starts automatically at your  
selected point.  
Change the audio channel  
Note  
Resume video play from last stopped  
point  
# This feature is only available forVCD/DivX play.  
Note  
1 During play, press AUDIO repeatedly to  
select an audio channel available on the  
# This feature is only available for DVD/VCD play.  
disc:  
#ꢎ Mono Left  
#ꢎ Mono Right  
#ꢎ Stereo  
1 In stop mode and when the disc has not  
been removed, press  
.
To cancel resume mode and stop play  
completely:  
Select a camera angle  
1 In stop mode, press .  
Note  
# This feature is only available for DVDs recorded with  
multiple camera angles.  
Play options  
Display play information  
1 During play, press ANGLE/PROG  
repeatedly to select a camera angle.  
1 During play, press DISPLAY/RDS  
repeatedly to display play information.  
Picture view options  
Zoom in/out image  
1 During video play, press (ZOOM)  
repeatedly to zoom in/out the image.  
#ꢎ When the image is zoomed in, you  
Preview pictures  
1 During play, press .  
» The pictures in the current folder are  
displayed.  
can press  
image.  
/
to pan through the  
2 Press / to select a picture from the  
folder.  
Slow-motion play  
1 During video play, press (SLOW)  
repeatedly to select a slow play option.  
» The sound is muted.  
» A thumbnail of the selected picture is  
displayed in the right pane.  
3 Press OK to start slideshow from the  
selected picture.  
» To resume play at normal speed, press  
.
Rotate picture  
1 During play, press / / / to rotate the  
picture anti-clockwise/clockwise.  
18 EN  
#ꢎ [All] – If the connected device supports  
multi-channel audio formats, select this  
option.  
6 Adjust settings  
[Night Mode]  
1 Press SYSTEM MENU.  
Make loud sound level softer and soft sound  
level louder so that you can watch the DVD  
movies at a low volume, without disturbing  
others.  
2 Select a setup page.  
3 Select an option and then press  
.
4 Select a setting and then press OK.  
#ꢎ [On]Nꢎꢂꢉ&ꢈꢍꢎ(ꢔꢄꢂꢇꢎ@ꢄꢂ'ꢄꢉ/ꢎꢆꢇꢎꢉꢄ/!ꢇꢎ‚„ꢊꢎ  
only).  
#ꢎ [Off] – enjoy surround sound with its full  
dynamic range.  
#ꢎ To return to the previous menu, press  
.
#ꢎ To exit the menu, press SYSTEM  
MENU.  
Video setup  
General setup  
On the [Video Setup] page, you can set the  
following options:  
On the [General Setup] page, you can set the  
following options:  
[TV System]  
[OSD language]  
Change this setting if the video does not appear  
correctly. By default, this setting matches the  
most common setting forTVs in your country.  
#ꢎ [NTSC] - ForTV with NTSC color system.  
#ꢎ [PAL] - ForTV with PAL color system.  
#ꢎ [Multi] - ForTV that is compatible with  
both PAL and NTSC.  
Select the preferred language for on-screen  
display.  
[DivX®VOD Code]  
Display the DivX® registration code.  
Tip  
# Enter this DivX registration code when you rent or  
purchase video from http://vod.divx.com/.The DivX  
videos rented or purchased through the DivX®VOD  
(Video On Demand) service can be played only on the  
device to which it is registered.  
[TV Display]  
TheTV format determines the aspect ratio of  
display according to the type ofTV you have  
connected.  
4:3 Pan Scan (PS)  
4:3 Letter Box (LB)  
16:9 (Wide Screen)  
Audio setup  
#ꢎ [4:3 Pan Scan] – For 4:3 screenTV: full-  
height display with the trimmed sides.  
#ꢎ [4:3 Letter Box] – For 4:3 screenTV:  
wide-screen display with black bars on the  
top and bottom of the screen.  
#ꢎ [Wide Screen] – For wide-screenTV:  
display ratio 16:9.  
On the [Audio Setup] page, you can set the  
following options:  
[Digital Output]  
Select audio formats supported by the  
connected device.  
#ꢎ [Off] Turn off the digital output.  
#ꢎ [PCM] – If the connected device cannot  
decode multichannel audio, select this  
option.  
EN 19  
[Picture Setting]  
[Parental Control]  
Customize picture color settings.  
Restricts access to discs that are unsuitable for  
children.These types of discs must be recorded  
with ratings.  
[ComponentVideo]  
Set the video output according to the video  
connection. If the composite connection is used,  
ꢇ!ꢄꢊꢎꢊꢂꢇꢇꢄꢉ/ꢎꢄꢊꢎꢉꢈꢇꢎꢕꢂ(ꢔꢄꢕꢂꢜ;  
Press OK.  
Select a rating level, then press OK.  
Press the numeric keys to enter the password.  
#ꢎ [S-VIDEO] – If the S-Video connection is  
used, select this option.  
#ꢎ [Interlaced] – For ordinaryTV: turn on the  
interlace mode.  
Note  
#ꢎ [P-Scan] – For progressive scanTV: turn on  
the progressive scan mode.  
# Rated discs above the level you set in [Parental  
Control]ꢎꢕꢂ(ꢔꢄꢕꢂꢎꢆꢎꢁꢆꢊꢊ'ꢈꢕꢜꢎꢇꢈꢎ%ꢂꢎꢁꢌꢆꢍꢂꢜ;  
# The ratings are country-dependent.To allow all discs to  
play, select [8.Adult].  
# Some discs have ratings printed on them but are not  
recorded with ratings.This function has no effect on  
such discs.  
Preferences  
On the [Preferences] page, you can set the  
following options:  
[Password]  
This setting allows you to change the password  
for parental control.The default password is  
0000.  
[Audio]  
Select the preferred audio language for disc  
play.  
1) Press the numeric keys to enter ‘0000’ or  
your last set password at [Old Password]ꢎꢅꢂꢌꢜ;  
2) Enter the new password at [New  
Password]ꢎꢅꢂꢌꢜ;  
[Subtitle]  
Select the preferred subtitle language for disc  
play.  
[Disc Menu]  
Select the preferred disc menu language.  
3) Enter the new password again at ^%ꢀꢌ\ꢄꢑꢅ  
new password]ꢎꢅꢂꢌꢜ;  
4) Press OK to exit the menu.  
Note  
# If the language you have set is not available on the disc,  
the disc uses its own default language.  
Note  
# For some discs, the subtitle/audio language can only be  
# If you forget the password, enter ‘0000’ before you set  
a new password.  
changed from the disc menu.  
[DivX Subtitle]  
Select a character set that supports the DivX  
subtitle.  
[Version Info]  
Display the software version of this apparatus.  
[Default]  
Resets all the settings of this unit to factory  
default, except for the password and parental  
settings.  
Note  
# †ꢉꢊꢔꢕꢂꢎꢇ!ꢆꢇꢎꢇ!ꢂꢎꢊꢔ%ꢇꢄꢇꢌꢂꢎꢅꢌꢂꢎ!ꢆꢊꢎꢇ!ꢂꢎꢂ}ꢆꢃꢇꢎꢊꢆ$ꢂꢎꢅꢌꢂꢎ  
ꢉꢆ$ꢂꢎꢆꢊꢎꢇ!ꢂꢎ$ꢈ@ꢄꢂꢎꢅꢌꢂ;ꢎꢘ##ꢈꢕꢎꢂ}ꢆ$ꢁꢌꢂꢎꢇ!ꢂꢎꢅꢌꢂꢎꢉꢆ$ꢂꢎꢈ#ꢎ  
the movie is ‘Movie.avi’, then you will need to name the  
ꢇꢂ}ꢇꢎꢅꢌꢂRꢏꢈ@ꢄꢂ;ꢊꢔ%SꢎꢈꢕRꢏꢈ@ꢄꢂ;ꢊꢕꢇS;ꢎ  
20 EN  
7 Tune to FM  
radio stations  
Program radio stations  
manually  
Note  
1 Ensure that you have connected and fully  
# You can program a maximum of 20 preset radio  
stations.  
extended the supplied FM antenna.  
2 Press TUNER.  
3 Press and hold / .  
1 Tune to a radio station.  
4ꢎ ꢒ!ꢂꢉꢎꢇ!ꢂꢎ#ꢕꢂ(ꢔꢂꢉꢃꢍꢎꢄꢉꢜꢄꢃꢆꢇꢄꢈꢉꢎꢊꢇꢆꢕꢇꢊꢎꢇꢈꢎ  
2 Press ANGLE/PROG to activate  
change, release the button.  
programming.  
» The FM tuner tunes to a station with  
strong reception automatically.  
3 Press / to allocate a number from  
1 to 20 to this radio station, then press  
ANGLE/PROGꢎꢇꢈꢎꢃꢈꢉꢅꢕ$;  
5 Repeat steps 3-4 to tune to more stations.  
» ꢛ!ꢂꢎꢁꢕꢂꢊꢂꢇꢎꢉꢔ$%ꢂꢕꢎꢆꢉꢜꢎꢇ!ꢂꢎ#ꢕꢂ(ꢔꢂꢉꢃꢍꢎ  
of the preset station are displayed.  
To tune to a weak station:  
Press / ꢎꢕꢂꢁꢂꢆꢇꢂꢜꢌꢍꢎꢔꢉꢇꢄꢌꢎꢍꢈꢔꢎꢅꢉꢜꢎꢈꢁꢇꢄ$ꢆꢌꢎ  
reception.  
4 Repeat the above steps to program other  
stations.  
Program radio stations  
automatically  
Note  
# To overwrite a programmed station, store another  
station in its place.  
Note  
# You can program a maximum of 20 preset radio  
stations.  
Tune to a preset radio station  
1 Press  
/
to select a preset number to  
1 Press / to select a preset number  
start programing.  
that you want.  
2 Press and hold ANGLE/PROG for  
2 seconds to activate automatic  
programming.  
Tip  
# You can also use the numerical keypad to select a  
preset station directly.  
» [AUTO]ꢎ‚ꢆꢔꢇꢈ‰ꢎꢄꢊꢎꢜꢄꢊꢁꢌꢆꢍꢂꢜꢎ%ꢕꢄꢂ]ꢍ;  
» All available stations are programmed  
in the order of waveband reception  
strength.  
» The last programed radio station is  
broadcast automatically.  
EN 21  
Select automatic loudness control  
8 Adjust volume  
level and sound  
effect  
Automatic loudness control increases the treble  
and bass effect at low volume levels (the higher  
the volume, the lower the treble and bass  
levels).  
1 To turn on automatic loudness control,  
press LOUD/DBB during play until the  
loudness icon is displayed.  
Adjust volume level  
#ꢎ To turn off automatic loudness  
control, press LOUD/DBB until the  
loudness icon disappears.  
1 During play, press VOL +/- to increase/  
decrease the volume level.  
Mute sound  
Select a sound effect  
1 During play, press MUTE to mute/unmute  
Note  
sound.  
# You cannot use different sound effects at the same  
time.  
Listen through headphone  
1 Plug a headphone into the socket on  
Select a preset sound effect  
the unit.  
1 During play, press DSC repeatedly to  
select:  
#ꢎ [Classic]  
#ꢎ [Rock]  
#ꢎ [Jazz]  
#ꢎ [Pop]  
#ꢎ [FLAT]ꢎ‚]ꢆꢇ‰  
Enhance bass  
1 To turn on bass enhancement, press  
LOUD/DBB repeatedly during play until  
the DBB logo is displayed.  
#ꢎ To turn off bass enhancement, press  
LOUD/DBB repeatedly until the DBB  
logo disappears.  
22 EN  
» The unit turns on automatically at  
the set time and switches to the last  
selected source.  
9 Other features  
» To deactivate the alarm timer, select  
Activate demonstration mode  
[OFF] (off) at step 6.  
You can see an overview of all features.  
1 In standby mode, press on the main unit  
to activate the demonstration mode.  
» A demonstration of major available  
features starts.  
Set the sleep timer  
1 When the unit is turned on, press SLEEP/  
TIMER repeatedly to select a set period of  
time (in minutes).  
To deactivate the demonstration mode:  
» The unit turns off automatically after  
the set period of time.  
1 Press on the main unit again.  
Adjust brightness of display  
panel  
Connect other devices  
1 In standby mode, press MODE/DIM  
repeatedly to select different levels of  
brightness for the display panel.  
Listen to an audio player  
You can listen to audio player through this unit.  
Set the alarm timer  
1 Ensure that you have set the clock  
correctly.  
2 In standby mode, press and hold SLEEP/  
TIMER.  
» The hour digits are displayed and begin  
to blink.  
3 Press +VOL - to set the hour, then press  
SLEEP/TIMER again.  
» The minute digits are displayed and  
begin to blink.  
1 Connect the audio player.  
#ꢎ For audio players with red/white  
audio output sockets:  
4 Press +VOL - to set the minute.  
5 Press SLEEP/TIMERꢎꢇꢈꢎꢃꢈꢉꢅꢕ$;  
» [OFF] (off) begins to blink.  
Connect a red/white audio cable (not  
supplied) to the AUX IN L/R sockets  
and to the audio output sockets on  
the audio player.  
6 To activate the wake-up timer, press +VOL  
- to select [ON] (on) while [OFF] (off) is  
blinking.  
» A clock icon appears on the display.  
EN 23  
#ꢎ For audio players with headphone  
sockets:  
10 Product  
information  
Connect a 3.5mm audio cable (not  
supplied) to the MP3 LINK socket  
and to the headphone socket on the  
audio player.  
2 Select the MP3 Link/AUX source.  
Note  
3 Start play on the audio player.  
# Product information is subject to change without prior  
notice.  
Record to a digital recorder  
You can record audio from this unit to a digital  
recorder.  
=ꢇꢃꢍꢋ\ꢍꢆꢁꢋꢀꢌꢉ  
8
Qꢑꢇꢎꢋ\ꢃꢄ  
Rated Output Power 2X20W RMS  
ꢕꢂ(ꢔꢂꢉꢃꢍꢎꢖꢂꢊꢁꢈꢉꢊꢂ 20 -20000 Hz, 3dB  
Signal to Noise Ratio >67dB  
Aux Input  
1V RMS 20kohm  
Disc  
LaserType  
Disc Diameter  
Video Decoding  
Semiconductor  
12cm/8cm  
MPEG-1 / MPEG-2 /  
DivX  
1 Connect a coaxial cable (not supplied) to:  
#ꢎ the COAXIAL socket  
Video DAC  
Signal System  
Video Format  
Video S/N  
Audio DAC  
Total Harmonic  
Distortion  
12Bits  
PAL / NTSC  
4:3 / 16:9  
>48dB  
24Bits / 96kHz  
<1% (1 kHz)  
#ꢎ the digital input socket on the digital  
recorder  
2 Play audio to be recorded.  
3 Begin to record on the digital recorder  
(see the digital recorder user manual).  
ꢕꢂ(ꢔꢂꢉꢃꢍꢎ  
4Hz - 20kHz (44.1kHz)  
4Hz - 22kHz (48kHz)  
4Hz - 24kHz (96kHz)  
>67dBA  
Response  
S/N Ratio  
24 EN  
`ꢌꢃꢄꢅꢊ!Jꢒ  
Tuning Range  
Tuning grid  
Sensitivity - Mono, 26dB  
S/N Ratio  
Sensitivity - Stereo, 46dB >43 dBf  
S/N Ratio  
Search Selectivity  
Total Harmonic Distortion <3%  
Supported disc formats  
87.5 - 108MHz  
50KHz  
<22 dBf  
#ꢎ DigitalVideo Discs (DVDs)  
#ꢎ Video CDs (VCDs)  
#ꢎ SuperVideo CDs (SVCDs)  
#ꢎ DigitalVideo Discs + Rewritable  
(DVD+RW)  
#ꢎ Compact Discs (CDs)  
>28dBf  
#ꢎ ꢋꢄꢃꢇꢔꢕꢂꢎ‚Jꢈꢜꢆ")ꢎ‘ꢋ†ꢙ‰ꢎꢅꢌꢂꢊꢎꢈꢉꢎ`ꢖ‚ꢒ‰  
#ꢎ DivX(R) disc on CD-R(W):  
#ꢎ DivX 3.11, 4.x and 5.x  
Signal to Noise Ratio  
>50dB  
#ꢎ WMA  
Supported MP3-CD formats:  
#ꢎ ISO 9660  
Speakers  
#ꢎ Max. title/album name: 12 characters  
#ꢎ Max. title number plus album: 255.  
#ꢎ Max. nested directory: 8 levels.  
#ꢎ Max. album number: 32.  
Speaker Impedance  
Speaker Driver  
Sensitivity  
8ohm  
4” Full range  
>82dB/m/W  
#ꢎ Max. MP3 track number: 999.  
#ꢎ ꢀꢔꢁꢁꢈꢕꢇꢂꢜꢎꢊꢆ$ꢁꢌꢄꢉ/ꢎ#ꢕꢂ(ꢔꢂꢉꢃꢄꢂꢊꢎ#ꢈꢕꢎꢏꢋꢐꢎ  
disc: 32 kHz, 44.1 kHz, 48 kHz.  
#ꢎ Supported Bit-rates of MP3 disc are: 32, 64,  
96, 128, 192, 256 (kbps).  
#ꢎ The following formats are not supported:  
#ꢎ Files like *.VMA, *.AAC, *.DLF, *.M3U,  
#ꢎ *.PLS, *.WAV  
General information  
AC power  
110 - 240V,  
~50/60 Hz  
25W  
Operation Power  
Consumption  
CompositeVideo  
Output  
1.0Vp-p, 75ohm  
#ꢎ Non-English Album/Title name  
#ꢎ Discs recorded in Joliet format  
#ꢎ MP3 Pro and MP3 with ID3 tag  
Coaxial Output  
0.5Vpp 0.1Vpp  
75ohm  
Headphone Output  
USB Direct  
Dimensions  
- Main Unit  
(W x H x D)  
- Speaker Box  
(W x H x D)  
Weight  
- With Packing  
- Main Unit  
- Speaker Box  
2X15mW 32ohm  
Version 2.0  
USB playability information  
220 x 90 x 240mm  
Compatible USB devices:  
#ꢎ “ꢀ*ꢎ]ꢆꢊ!ꢎ$ꢂ$ꢈꢕꢍꢎ‚“ꢀ*ꢎ”;•ꢎꢈꢕꢎ“ꢀ*–;–‰  
#ꢎ “ꢀ*ꢎ]ꢆꢊ!ꢎꢁꢌꢆꢍꢂꢕꢊꢎ‚“ꢀ*ꢎ”;•ꢎꢈꢕꢎ“ꢀ*–;–‰  
#ꢎ $ꢂ$ꢈꢕꢍꢎꢃꢆꢕꢜꢊꢎ‚ꢕꢂ(ꢔꢄꢕꢂꢊꢎꢆꢉꢎꢆꢜꢜꢄꢇꢄꢈꢉꢆꢌꢎꢃꢆꢕꢜꢎ  
reader to work with this apparatus)  
140 x 220 x 160 mm  
6 kg  
1.65 kg  
2 x 1.5 kg  
Supported formats:  
#ꢎ “ꢀ*ꢎꢈꢕꢎ$ꢂ$ꢈꢕꢍꢎꢅꢌꢂꢎ#ꢈꢕ$ꢆꢇꢎ–”)ꢎꢓꢛ–—)ꢎ  
FAT32 (sector size: 512 bytes)  
#ꢎ MP3 bit rate (data rate): 32-320 Kbps and  
variable bit rate  
EN 25  
#ꢎ WMA v9 or earlier  
#ꢎ Directory nesting up to a maximum of 8  
levels  
#ꢎ Number of albums/ folders: maximum 99  
#ꢎ Number of tracks/titles: maximum 999  
#ꢎ ID3 tag v2.0 or later  
#ꢎ File name in Unicode UTF8 (maximum  
length: 128 bytes)  
11 Troubleshooting  
Caution  
# Never remove the casing of this unit.  
Unsupported formats:  
To keep the warranty valid, never try to repair  
the system yourself.  
#ꢎ Empty albums: an empty album is an album  
ꢇ!ꢆꢇꢎꢜꢈꢂꢊꢎꢉꢈꢇꢎꢃꢈꢉꢇꢆꢄꢉꢎꢏꢋꢐꢑꢒꢏꢓꢎꢅꢌꢂꢊ)ꢎꢆꢉꢜꢎ  
is not be shown in the display.  
If you encounter problems when using this unit,  
ꢃ!ꢂꢃ"ꢎꢇ!ꢂꢎ#ꢈꢌꢌꢈ'ꢄꢉ/ꢎꢁꢈꢄꢉꢇꢊꢎ%ꢂ#ꢈꢕꢂꢎꢕꢂ(ꢔꢂꢊꢇꢄꢉ/ꢎ  
service. If the problem remains unsolved, go to  
the Philips web site (www.Philips.com/support).  
When you contact Philips, ensure that your  
unit is nearby and the model number and serial  
number are available.  
#ꢎ “ꢉꢊꢔꢁꢁꢈꢕꢇꢂꢜꢎꢅꢌꢂꢎ#ꢈꢕ$ꢆꢇꢊꢎꢆꢕꢂꢎꢊ"ꢄꢁꢁꢂꢜ;ꢎꢈꢕꢎ  
example,Word documents (.doc) or MP3  
ꢅꢌꢂꢊꢎ'ꢄꢇ!ꢎꢂ}ꢇꢂꢉꢊꢄꢈꢉꢎ;ꢜꢌ#ꢎꢆꢕꢂꢎꢄ/ꢉꢈꢕꢂꢜꢎꢆꢉꢜꢎ  
not played.  
#ꢎ ꢓꢓ`)ꢎꢒꢓ„)ꢎꢋ`ꢏꢎꢆꢔꢜꢄꢈꢎꢅꢌꢂꢊ  
#ꢎ ꢖꢏꢎꢁꢕꢈꢇꢂꢃꢇꢂꢜꢏꢓꢎꢅꢌꢂꢊꢎ‚;'ꢆ@)ꢎ;$šꢆ)ꢎ  
.m4p, .mp4, .aac)  
No power  
#
#
#
Ensure that the AC cord of the apparatus  
is connected properly.  
Ensure that there is power at the AC  
outlet.  
As a power-saving feature, the system  
switches off automatically 15 minutes after  
track play reaches the end and no control  
is operated.  
#ꢎ ꢒꢏꢓꢎꢅꢌꢂꢊꢎꢄꢉꢎ›ꢈꢊꢊꢌꢂꢊꢊꢎ#ꢈꢕ$ꢆꢇ  
No disc detected  
#
#
#
Insert a disc.  
Check if the disc is inserted upside down.  
Wait until the moisture condensation at  
the lens has cleared.  
#
#
Replace or clean the disc.  
“ꢊꢂꢎꢆꢎꢅꢉꢆꢌꢄ™ꢂꢜꢎ`ꢎꢈꢕꢎꢃꢈꢕꢕꢂꢃꢇꢎ#ꢈꢕ$ꢆꢇꢎꢜꢄꢊꢃ;  
No picture  
#
#
Check the video connection.  
Turn on theTV to the correctVideo-In  
channel.  
Progressive scan is activated but theTV  
does not support progressive scan.  
#
Black and white or distorted picture  
#
The disc does not match theTV color  
system standard (PAL/NTSC).  
Sometimes a slight picture distortion may  
appear.This is not a malfunction.  
#
26 EN  
#
#
Clean the disc.  
A distorted picture may appear during  
progressive scan setup.  
disc play reaches the end and no control is  
operated.  
Poor radio reception  
The aspect ratio of theTV screen cannot be  
changed even though you have set theTV  
display format.  
#
Increase the distance between the unit and  
yourTV orVCR.  
#
#
Fully extend the FM antenna.  
Connect an outdoor FM antenna instead.  
#
ꢛ!ꢂꢎꢆꢊꢁꢂꢃꢇꢎꢕꢆꢇꢄꢈꢎꢄ#ꢎꢅ}ꢂꢜꢎꢈꢉꢎꢇ!ꢂꢎꢌꢈꢆꢜꢂꢜꢎ  
DVD disc.  
The aspect ratio may not be changed for  
someTV systems.  
Audio or subtitle languages cannot be set  
#
#
The disc is not recorded with sound or  
subtitles in multiple languages.  
No sound or poor sound  
#
The audio or subtitle language setting is  
prohibited on the disc.  
#
#
#
Adjust the volume.  
Disconnect the headphones.  
Check that the speakers are connected  
correctly.  
%ꢆꢌꢌꢀꢁꢅꢏꢋꢉꢇꢎꢆꢔꢅꢉꢀꢑꢃꢅ\ꢎꢃꢉꢅꢋꢌꢅ|=*ꢅꢏꢃꢚꢋꢍꢃ  
#
ꢛ!ꢂꢎꢉꢔ$%ꢂꢕꢎꢈ##ꢈꢌꢜꢂꢕꢊꢎꢈꢕꢎꢅꢌꢂꢊꢎꢄꢉꢎꢇ!ꢂꢎ“ꢀ*ꢎ  
device has exceeded a certain limit.This  
phenomenon is not a malfunction.  
ꢛ!ꢂꢎ#ꢈꢕ$ꢆꢇꢊꢎꢈ#ꢎꢇ!ꢂꢊꢂꢎꢅꢌꢂꢊꢎꢆꢕꢂꢎꢉꢈꢇꢎ  
supported.  
#
Check if the stripped speaker wires are  
clamped.  
#
Remote control does not work  
#
*ꢂ#ꢈꢕꢂꢎꢍꢈꢔꢎꢁꢕꢂꢊꢊꢎꢆꢉꢍꢎ#ꢔꢉꢃꢇꢄꢈꢉꢎ%ꢔꢇꢇꢈꢉ)ꢎꢅꢕꢊꢇꢎ  
select the correct source with the remote  
control instead of the main unit.  
Reduce the distance between the remote  
control and the unit.  
Insert the battery with its polarities (+/–  
signs) aligned as indicated.  
Replace the battery.  
USB device not supported  
The USB device is incompatible with the unit.  
Try another one.  
#
#
Timer does not work  
#
#
Set the clock correctly.  
Switch on the timer.  
#
#
Clock/timer setting erased  
Aim the remote control directly at the  
sensor on the front of the unit.  
#
Power has been interrupted or the power  
cord has been disconnected.  
Reset the clock/timer.  
Disc does not play  
#
#
Insert a readable disc and ensure that the  
label side faces up.  
Check the disc type, color system and  
regional code. Check for any scratches or  
smudges on the disc.  
#
#
#
#
Press SYSTEM MENU to exit the system  
setup menu.  
Disable the password for parental control  
or change the rating level.  
Moisture has condensed inside the system.  
Remove the disc and leave the system  
turned on for about an hour. Disconnect  
and reconnect the AC power plug, and  
then turn on the system again.  
As a power-saving feature, the system  
turns off automatically 15 minutes after  
#
EN 27  
© 2011 Koninklijke Philips Electronics N.V.  
All rights reserved.  
MCD122_98_UM_V3.0  

Toastmaster TCM4WCAN User Manual
Toastess Coffee Maker TFC 326 User Manual
Texas Instruments TUSB3410 User Manual
Sony Ericsson T18LX User Manual
Sonic Alert Oracle Telecommunications Billing Inegrator B31540 02 User Manual
Seagate BARRACUDA ES SERIAL ATA ST3500830NS User Manual
Samsung GH68 06704A User Manual
Samsung Comeback GH68 22878A User Manual
Sagem MyX2 2 User Manual
Philips Xenium CT9A9WBLK User Manual