User manual
Charge the handset(s) for 24 hours before use !
3
4
6
7
9
Contents
What’s in the box
Icons on the handset display
10 Connect
11 Install
13 Call
18 Phonebook
22 Call log
23 Dialled list
25 Other features
36 Using the intercom
38 Default settings
39 Troubleshooting
40 Information
42 Index
3
EN
Important information
Instructions for use for the VOIP 433
The VOIP 433 is a Windows Live™ Messenger compatible USB / landline phone, capable of voice
communication through Internet protocol as well as on a normal landline line.
For your safety
Safety information
This telephone is not designed for making emergency telephone calls when the power fails. An alternative
should be made available for access to emergency calls.
Power requirements
The product requires an electrical supply of 220 - 240 volts, single phase alternating current, excluding IT
installations defined in standard EN 60950.
Battery requirements
The handset requires power source of two rechargeable NiMH batteries, size AAA 1.2V 750mAh (HR10/44).
IF THE INCORRECT TYPE OF BATTERIES IS USED, A WARNING MESSAGE WILL BE DISPLAYED.
WARNING : The electrical network is classified as dangerous according to criteria in the standard
IEC 60950. The only way to power down this product is by unplugging the power supply from the
electrical outlet. Ensure the electrical outlet is located close to the apparatus and is always easily
accessible.
CAUTION : RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. Never
use non-rechargeable batteries; use recommended type supplied with this telephone. NiMH batteries
must be disposed of in accordance with the applicable waste disposal regulations.
Safety precautions
>
>
>
Do not allow the handset to come into contact with liquids or moisture.
Do not open the handset or base station. This could expose you to high voltages.
Do not allow the charging contacts of the charger or the battery to come into contact with extraneous
conductive materials.
>
There is a slight chance that the telephone could be damaged by an electrical storm. It is recommended
that users unplug the phone from the USB socket during a storm.
>
>
>
Do not use the handset in an explosive hazard area such as where there is gas leaking.
Young children should be supervised to ensure that they do not play with the telephone.
Because the phone works by sending radio signals between the base unit and the handset, wearers of
hearing aids may experience interference in the form of a humming noise.
>
>
>
We advise that this phone should not be used near intensive care medical equipment or by persons with
pacemakers.
Your phone can interfere with electrical equipment such as answering machines, TV and radio sets if placed
too close. It is recommended that you position the base unit at least one meter from such appliances.
Privacy of communications may not be ensured when using this telephone.
4
EN
Important information
Install requirements
In order to use the phone, your computer should meet the following requirements :
•
•
Microsoft® Windows® XP-based PC.
Windows Live™ Messenger 8.0 software and account.
•
Check with your Internet service provider for applicable service fees.
•
•
PC must be switched on and connected to Windows Live™ Messenger 8.0.
Your online contact(s) must also be connected to Windows Live™ Messenger 8.0, with compatible audio
device (including microphone and speaker).
•
Microsoft Internet Explorer version 6 SP1 or later must be installed on your computer, though it does
not need to be your default browser.
Need help
For more information on troubleshooting and FAQ’s:
Online help : www.p4c.philips.com
Troubleshooting : see page 39
5
EN
What’s in the box
2 AAA Battery
HandsetVOIP433
Base station VOIP 433
Charger
1 power supply for
base station
1 power supply for
charger
CDROM
Quick Start Guide
Line Cord and line adaptor* (if relevant)
*(see note in “Connect”, page 10)
What else you need :
• Broadband Internet connection.
• Microsoft® Windows® XP-based
PC.
• Windows Live™ Messenger
installed on your PC and a
Windows Live™ Messenger
account. See http://get.live.com/
Note: Microsoft Internet Explorer
version 6 SP1 or later must be
installed on your PC, though it does
not need to be your default browser.
A desktop or a laptop
with free USB port
A telephone line
6
Your VOIP 433
EN
Overview handset
1
2
Earpiece
LED
Blinks when there is an incoming call.
Blinks steady when there are messages waiting.
Display, icons see page 9
3
4
Left and Right Soft keys
1
2
The functions of the soft keys are displayed right above the
soft keys.
5
Rock Key
Use to navigate the menus.
Use to view PHONEBOOK by pressing up or down
during standby mode.
Use to view DIALLED call log by pressing left or right
during standby mode.
6
7
Off & Exit Key
Use to end a call.
3
Use to deny Windows Live™ Messenger calls.
Use to exit menus.
Use to turn the handset on/off.
Talk & Recall Key
Use to make and receive telephone calls.
Use to send recall signal during telephone calls.
Use to pick up call on Windows Live™ Messenger.
Pound, Ringer Off & Pause Key
Use to enter a pause.
4
5
6
7
8
9
Use to turn the ringer on/off.
Calls/Handsfree Key
Use to enter the call record menu.
Use to turn handsfree on/off during a call.
10 Contact List Key
Use to launch Contact List.
11 Microphone
12 Volume Key
Adjust the volume.
13 Star & Key lock Key
Use to enter *.
8
Use to lock the keypad.
9
10
*Warning ! Handsfree activation could suddenly increase
the volume in the loudspeaker to a very high level. Make
sure the handset is not too close to your ear.
11
13 12
7
Your VOIP 433
EN
Overview base station
1
1
2
Paging key
Use to page the handset.
Use to register a handset.
2
3
LED on base station
- ON on when the base is powered up.
- Blinks steady when there is an incoming landline call or on a
landline call.
- Blinks slowly while paging the handset.
- Blinks quickly during registration mode.
- ON when the USB is plugged in and the base is powered up.
Main features
Contact list
•
•
•
Sign in Windows Live™ Messenger via the handset.
Contact list display on handset.
Windows Live™ Messenger status display for each address on the contact
list.
•
•
•
Change your online status using the handset.
Download contacts phone numbers from PC to the handset phonebook.
Emails, contact online, IM Invitation alerts.
Dual line phone
•
•
•
•
Able to receive calls from Windows Live™ Messenger as well as from telephone line.
User selectable melodies for each line for easy recognition.
Call waiting alert when there is another incoming call from another line.
Able to make calls using both lines at the same time with two handsets.
8
EN
Icons on the handset display
When being used for the first time, it is sometimes necessary to wait until the battery is
sufficiently charged before the icons appear on the display.
The display gives information about the operation of your telephone. Following icons can be
shown in the headline of the display.
Base/Handset link.
Telephone call in progress.
Battery full;
1/2 full;
Empty, please charge.
Loudspeaker is turned on.
The alarm clock is turned on.
The ringer is turned off.
Telephone Melody
Windows Live™ Messenger Melody
Volume
Windows Live™ Messenger voicemail
Message Waiting Indicator.
Keylock
Volume/Contrast level
Name
Number
Internal Melody
Mode
Contrast
Email Waiting
9
EN
Connect
1. Insert the plug of the power cord into the socket on the bottom of
the base unit then plug the power supply unit into your power outlet.
Note : *You may find in the box the line adaptor delivered
separately from the line cord. In this case, please, first plug this line
adaptor onto the line cord before connecting it to the line socket.
2. Connect the telephone line cord to the phone socket on the bottom
of the base unit and to the wall phone socket.
3. Each handset comes with a charger and adapter. Insert the plug of the
power cord into the socket on the bottom of the charger. Plug the
power supply unit into your power outlet.
4. To remove the battery compartment, unlock the battery door lock at
the bottom of the handset.
5. Place the 2 rechargeable NiMH AAA batteries (included), observing
their polarities, into the battery compartment on the handset.
6. Slide the battery door firmly into place until the battery door locks.
Note : The base station or charger must always be plugged into the
mains when charging or when in use. Always use rechargeable
batteries.
The warranty does not apply to the batteries and any other
components which have a limited lifetime or are exposed to wear.
7. Please note that handset may not turn ON for up to 15 minutes if the
batteries are too low. Before first use, put the product on the charger
and charge batteries for 24 hours minimum. The handset may get
warm during the initial charge. This is normal.
Note : Always use the line cable and the adapters provided with the
product.
10
EN
Install
Getting Ready
To start making Windows Live™ Messenger call,
overview to install Windows Live™ Messenger and create your
account (if not already done).
2. Connect the USB plug directly to your PC's USB slot.
3. Once your handset is powered up, you will see WELCOME message
on the display. Press any key to enter the Country Menu.
4. Press UP / DOWN
to select the country. Press OK to confirm.
Your phone will reset after OK is pressed.
Battery life and range
Optimal battery life is reached after 3 cycles of complete charging &
discharging. When reaching the range limit and the conversation becomes
crackly, move closer to the base. To reach optimal range, place the base
station away from electrical appliances.
Battery life in
talk time
Battery life in
standby mode
Indoor range
up to 50 metres
Outdoor range
up to 300 metres
up to 10 hours
up to 120 hours
Note : An out of range warning will be emitted and
will be
flashing on the display if you move too far away from the base unit
during a call. You will need to move closer to the base unit or your
call will be disconnected.
11
EN
Main menu
Your phone offers a variety of functions and features that are grouped in the menus.
To access the main menu, press MENU
and press UP / DOWN
to browse the menu.
Press
or place your phone in the charger to exit the menus.
Main menu
Display
Sounds
Settings
System
Clock
Handset
HS Key Tones
HS Tones
Baby Call
Auto answer
Alarm Clock
Timer
Register
Time Format
Handset Name
Contrast
Base Select
Delete HS
Change PIN
Reset
Language
Wallpaper
Colour
Stopwatch
Dial mode
Recall
Pause
Call log menu (refer to “Call log”, page 22 for details)
Missed
Received
Dialled
Call Timers
Delete Calls
Use Number
Details
Use Number
Details
Use Number
Details
Last Call
Dialled
Received
All Calls
Clear All
Missed
Dialled
Use Number
Use Number
Use Number
Received
All Calls
List
List
List
To Phonebook
Delete
To Phonebook
Delete
To Phonebook
Delete
To Phonebook
Delete
To Phonebook
Delete
To Phonebook
Delete
Phonebook
View
Use Number
Details
Edit
Delete
Add Entry
Quick Dial
Status
Delete All
Note : In menu mode, press
anytime or place your phone in the charger for charging and to exit
the menu and return to standby. Any unconfirmed changes will not be saved.
12
EN
Call
General Information
Before any call is made, please note the following.
Emergency Calls
Windows Live™ Messenger does not support emergency call; please make sure you have other alternatives in
case of emergency.
To make an emergency call using your VOIP433 phone you must be in phone mode
While in Messenger™ mode :
1. Press
to exit Messenger mode. You will be returned to the phone mode.
2. Dial the emergency number and press
.
While in phone mode :
Simply dial the emergency number and press
Low battery warning
.
If your phone is almost out of battery during a call, it will sound an alert tone. Place your phone on the charger
for charging as soon as possible or it would turn off when it is out of battery. Placing the phone on the charger
for charging will end the current call.
Call timer
The call timer shows the duration of your current call on display. It is shown in minutes and seconds (MM-SS)
in the first hour. After that, it will be shown in hours and minutes (HH-MM). This applies to landline calls only.
Sign in to your Windows Live™ Messenger
account
Note : To be able to sign in to Windows Live™ Messenger from your handset, you must have
automatically saved on your PC the email address and password of the account you wish to use.
To store your user name (email address) and password on the PC :
1. Enter your user name (email address) and password on the Windows Live™ Messenger login page.
2. Check "Remember Me" and "Remember my Password" checkboxes.
3. Click on SIGN IN button in Windows Live™ Messenger window. After you sign in, your user name
(email address) and password will be stored in the PC.
Note : Before you sign in to your Windows Live™ Messenger account, your telephone line will still be
working as long as the base is power up and the phone line cord is connected to the phone socket.
However, you will not be able to receive any call from Windows Live™ Messenger before you sign in
Windows Live™ Messenger.
Since your user name and password are stored on the PC, you can sign in your Windows Live™ Messenger
from your handset.
1. Press
.
If you have not sign in yet, the Sign In screen is shown. A list of Messenger users on PC with saved
passwords will be shown.
2. Press Up/Down
to select the Messenger ID to sign in to.
3. Press SIGN IN.
Once signed in, the contact list of the signed in user will be shown.
13
EN
Call
Windows Live™ Messenger Menu
After you sign in to Windows Live™ Messenger, you can access the Windows
Live™ Messenger menu by pressing the MENU softkey. In this menu, you can
change your online status, sort your contact list, download phonebook to your
handset, and more.
Call with Windows Live™ Messenger
Make an Windows Live™ Messenger call
1. Press
. The contact list will be shown.
2. Press UP / DOWN
to select the Windows Live™ Messenger user you would like to call.
3. Press SELECT to select the contact.
4. Press UP / DOWN
to select the user's Messenger ID.
5. Press PC to call the user.
Answer a call from Windows Live™ Messenger
When you receive a call from the Windows Live™ Messenger line, the Windows Live™ Messenger melody
will ring and the messenger ID will be shown on the display.
Press
to answer the call.
End a Windows Live™ Messenger call
Press
or place the phone on the charger will end the call and return the phone to standby.
Deny a Windows Live™ Messenger call
To deny an incoming Windows Live™ Messenger call, press
when the call is received on the handset.
Make a telephone call
Call from telephone line
1. Press
to obtain the line; dial tone should be heard.
2. Enter the number to dial.
14
EN
Call
Pre-dial
1. Enter the number you want to call. The number will appear on the display.
You can enter up to 20 digits.
2. Press
to dial the number.
Note : Long press
where you want to enter a pause.
Off Hook Phonebook Dialling/Chaining Dialling
You can dial out numbers from the phonebook after you have seized the phone line or on a call. And there is
no limit to the number of times chain dialling is accessed.
1. During off hook, press OPTIONS.
2. Select PHONEBOOK from the option list and press OK.
3. Press UP / DOWN
to browse the phonebook. Press DETAILS > DIAL to call.
Call from the phonebook
1. During standby, press UP / DOWN
to enter the phonebook.
2. Select VIEW, the entries should be shown.
3. Press UP / DOWN
to select the entry to call.
4. Press OPTIONS > DETAILS.
5. Press
to call the selected entry.
Call from the Contact List
1. Press
to enter the contact list.
2. Press UP / DOWN
to select the entry to call. Press SELECT to see the contact's detail.
3. Select the phone number of the entry. Once a phone number is selected, press PHONE to call the
phone number via the landline.
Answer a call
If the incoming call is from the landline, the landline melody will ring and
will flash in the display.
Press to answer the call.
15
EN
Call
When there are two incoming calls from both lines at the same time
Both Caller ID and Messenger ID will be shown on the display. Two keys, PHONE and PC will be shown.
Press the respective keys to pick up either call. Press
to pick up the first incoming call.
End a call
Press
or place the phone on the charger will end the call and return the phone to standby.
Quick dialling
You can assign frequently dialled number from the phonebook to keys on the handset. Once assigned, press
and hold the key on the handset during standby will dial the stored number. The number will be dialled using
your landline.
For details on assigning quick dialling numbers, please refer to section “Assign a quick dial key”, page 20.
Recall
While on a call, you can use the recall function to make a second outgoing call or receive a second incoming call.
Press
when a call waiting tone is heard and caller ID information is shown on the display.
Note : In order to receive or make second calls on your telephone line, you have to subscribe to the
call waiting service from your local service provider.
Second incoming call from the other line
You will be able to receive second incoming call from the other line (i.e. receive a telephone call while on a
Windows Live™ Messenger call). A special call waiting tone will be heard and the caller ID will be shown on
the display.
Press the ANSWER softkey to accept the second incoming call and terminates the current call.
To reject the incoming PC call, press REJECT.
16
EN
Call
Call in progress
Set the earpiece volume during a call
You can increase or decrease the volume of a caller's voice during a call. There are 5 volume levels for
selection.
To adjust the volume, during a call :
1. Press
2. Press
. The display shows the current volume level.
again to increase the volume.
When the volume is already at the maximum level, press
will return to the minimum level.
Microphone mute
During a call, if you wish to speak to someone privately without having the caller hear your conversation,
1. Press MUTE; the caller cannot hear you, but you can hear the caller.
2. Press UNMUTE to communicate with your caller again.
Handsfree call
Handsfree provides the convenience of talking to the caller without holding onto the phone. You can
communicate by using the handsfree/microphone of the phone. Handsfree also allows others in the room to
be involved in the conversation.
If you want to use the phone's handsfree feature, during a call,
1. Press the
key.
You can hear the caller over the loudspeaker and you can speak via the microphone.
the display.
will appear on
2. Press
again to deactivate the handsfree mode.
Setting the loudspeaker volume during a handsfree call
1. While the phone is off hook, press
. The display shows the current volume level.
2. Press again to increase the volume.
17
EN
Phonebook
You can use your phonebook to manage your phone entries.
Your phonebook can store 100 records. Each record can store a name with up to 10 characters and a number
with up to 20 digits.
Entries in the handset's phonebook will be available only in phone mode; it is not available while the user is in
Messenger mode.
Note : You can download your friends' phone numbers from your Windows Live™ Messenger
phonebook to your handset. Please note that after download, all previously stored records on the
handset will be erased and some records that are not on the Windows Live™ Messenger phonebook
will be overwritten.
To download the phone numbers from Windows Live™ Messenger :
Press
to enter Messenger mode and press the MENU key.
Press UP / DOWN
to select DOWNLOAD from the menu.
Follow the on screen instruction to download the phone numbers from Windows Live™ Messenger.
Add entry in phonebook
To add an entry to your phonebook,
1. Press UP / DOWN
to enter the phonebook menu. Select ADD ENTRY and press OK.
2. Enter the name of the entry; this name should be unique from the other phonebook entries. Press
DOWN to move to the next line.
3. Enter the number for this entry. Press DOWN to select the VIP melody.
Note : A VIP melody is a melody you can select for a special person. Your phone will ring the selected
VIP melody when the calling number has an exact match as the one in your phonebook.
4. Press LEFT / RIGHT
to select a special melody for this entry. Select OFF if you do not want to
assign a special melody for this entry.
5. Press SAVE to save the entry.
Note : Long press
where you want to enter a pause.
If your phonebook is full, FULL is displayed. You have to delete some records before entering new
ones.
You cannot enter an identical name for two different records in your phonebook. If so, DUPLICATE
NAME REPLACE? is displayed. Press OK to replace the existing record with the new entry or press
CANCEL to return to the previous display and make changes to the name.
18
EN
Phonebook
View and edit phonebook entry
1. Press UP / DOWN
to enter the phonebook menu. Select VIEW to see the list of entries.
2. Press UP / DOWN
entry menu.
to find the entry you want to edit. Press OPTIONS to enter phonebook
3. Press UP / DOWN
4. Press UP / DOWN
5. Press LEFT / RIGHT
to select EDIT and press OK.
to move between the name, number and VIP melody fields.
to move between the alphanumeric characters within the name and number
field, or browse the VIP melodies in the VIP melody field.
6. Press SAVE when finished editing.
Delete phonebook entry
1. Press UP / DOWN
to enter the phonebook menu. Select VIEW to see the list of entries.
2. Press UP / DOWN
entry menu.
to find the entry you want to delete. Press OPTIONS to enter phonebook
3. Press UP / DOWN
to select DELETE and press OK.
4. Press OK when CONFIRM? is shown.
Phonebook record search by letter
1. Press UP / DOWN
to enter the phonebook menu. Select VIEW and press OK.
2. Enter the first letter of the record you want to find.
19
EN
Phonebook
Quick dial to entries in your phonebook
Warning : Quick dial is available only when you are in phone mode and once you have downloaded
the phonebook from Windows Live™ Messenger, all quick dial keys will be reset.
Assign a quick dial key
1. Press UP / DOWN
to enter the phonebook menu.
2. Select QUICK DIAL and press OK. The first quick dial key is displayed.
3. Press UP / DOWN
to scroll to the quick dial key you wish to use.
4. When no number is assigned to the quick dial key, the display shows EMPTY. To assign a number, press
SELECT, and then go to step 6.
5. The display shows a list of entries in your private phonebook.
6. Press UP / DOWN
to select the entry you wish to use.
7. Press DETAILS. The display shows the details of the entry that you selected. Press OK to confirm.
8. Press CANCEL to return to the phonebook menu.
Change a quick dial key
1. Press UP / DOWN
to enter the phonebook menu.
2. Select QUICK DIAL and press OK. The first quick dial key is displayed.
3. Press UP / DOWN
to scroll to the quick dial key entry you wish to use.
4. If there is already a number assigned to the quick dial key, the display shows the name and number of the
entry. Press OPTIONS. Press UP / DOWN
to select CHANGE. Press OK.
5. The display shows a list of entries in your private phonebook.
6. Press UP / DOWN
to select the entry you wish to use.
7. Press DETAILS. The display shows the details of the entry that you selected. Press OK to confirm.
8. Press CANCEL to return to the phonebook menu.
20
EN
Phonebook
Delete a quick dial key
1. Press UP / DOWN
to enter the phonebook menu.
2. Select QUICK DIAL and press OK. The first quick dial key is displayed.
3. Press UP / DOWN
to scroll to the quick dial key entry you wish to delete.
4. Press OPTIONS. Press UP / DOWN
to select DELETE. Press OK.
5. CONFIRM? is displayed. Press OK to confirm.
6. Press CANCEL to return to the phonebook menu.
View available phonebook space
Your phone keeps track of how much memory you have used and how much is still available in your
phonebook.
1. Press UP / DOWN
to enter the phonebook menu.
2. Select STATUS to display free memory and used memory and press OK.
3. Press OK to return to the phonebook menu.
21
EN
Call log
Your phone keeps a record each time you make, receive or miss a call. You can access a list of the last 20 calls
that you have missed, the last 10 calls you have received, and the last 10 dialled numbers you have dialled. Each
record stores a name up to 12 characters and a 20 digits number.
For missed and received calls, the call records will automatically be stored only if you have subscribed to caller
ID service from your local Telephone line service provider. Calls made via Windows Live™ Messenger in
Messenger mode will not be logged.
If you have more than one handset, each handset has its own call list.
View call log
1. Press
press OK.
. Press UP / DOWN
to select DIALLED, MISSED or RECEIVED call list. Then
2. Press UP / DOWN
to browse the call records.
3. Press OPTIONS and select DETAILS to view the call record information.
Copy call log entry in the phonebook
To save the phone number of your family, friends, and colleagues, you can save the call records to your
phonebook if you do not already have their contact information.
While you are viewing the call record information (refer to Call Record Information section above),
1. Press UP / DOWN
to select the number to save.
2. Press OPTIONS.
3. To save it to your phonebook, select TO PHONEBOOK.
4. Enter a name for this entry; press DOWN to move to the next field.
5. Edit the number if necessary; press DOWN.
6. Press LEFT / RIGHT
to save the entry.
to select a VIP melody for the entry if necessary. Press SAVE when finished
Note : After saving to your phonebook, the entry will still be in your call log and it will appear using the
new name.
Delete a call log entry
You can delete each individual call record one at a time. To delete a record :
1. While viewing the call record (refer to Call Record Information section before), select the entry to delete
and press OPTIONS.
2. Press UP / DOWN
to select DELETE. Press OK.
3. Press OK to confirm.
22
EN
Call log
Delete all the call log entries
You can delete all the call records lists at once. To delete all call records list :
1. From standby mode, press
2. Press UP / DOWN
3. Press UP / DOWN
to enter Call log menu.
to select DELETE CALLS. Press OK.
to select the call list to clear; if you want to delete all the call records, select
ALL CALLS. Press OK to delete the selected call list.
4. Press OK to confirm.
Dialled list
You phone stores the last 10 numbers you have dialled. If you have more than one handset, each handset has
its own dialled list.
View the dialled list and redial a number
1. Press LEFT / RIGHT
2. Press UP / DOWN
to access the dialled list; the list of dialled numbers will be shown.
to scroll through the last 10 dialled numbers.
3. Select the dialled number you want to redial and press
to dial the number.
Matching your phonebook record
If a dialled number matches a phone number stored in the phonebook, that phonebook name will be
displayed instead of the dialled number.
23
EN
Dialled list
Record a number from dialled list into phonebook
1. Press LEFT / RIGHT
2. Press UP / DOWN
to enter the DIALLED list.
to select the dialled list entry that you want to save.
3. Press OPTIONS. Press DOWN to select TO PHONEBOOK and press OK.
4. Enter a name for this record. Press DOWN to reach the number field.
5. Edit the number if necessary. Press DOWN to reach the Melody field.
6. Press LEFT / RIGHT
to select a VIP for this entry if necessary.
7. Press SAVE to save the entry.
Note : The redial record saved into the phonebook is still in your dialled list but it will show the new
name entered.
Delete last numbers dialled
You can delete each individual dialled record one at a time.
1. While viewing the dialled record that you want to delete, press OPTIONS.
2. Press UP / DOWN
to select DELETE. Press OK.
3. Press OK to confirm.
Delete entire list of dialled numbers
Instead of deleting the records one by one, you have this option to delete the entire list of dialled numbers.
1. From standby mode, press
2. Press UP / DOWN
to enter Call log menu.
to select DELETE CALLS. Press OK.
to select DIALLED. Press OK to delete.
3. Press UP / DOWN
4. Press OK to confirm.
24
EN
Other features
Lock keypad
Keypad can be locked to prevent accidental key press.
When the keypad is locked, you can still answer an incoming call by pressing
.
During the call, the keypad is active. When the call is ended, the keypad will be locked again.
1. In idle mode, long press
. When locked,
will appear on the display.
2. Press the UNLOCK key to unlock the keypad. Press OK to confirm.
Paging
You can locate the handsets by using this feature.
Press
on the base.
All handsets registered to the base will produce the paging tone for 30 seconds and the screen displays
PAGING.
To stop paging :
Press the STOP softkey or
on one of the handsets or press
on the base again.
Note : A handset will not play the paging melody if it is powered off or not in idle mode. However, all
the other handsets will still ring.
CallerID first ring suppression
If you have subscribed for CallerID service, your phone will suppress the first ring before the CID. After
resetting, first ring suppression will be deactivated. After the first call, your phone will automatically detect if
CID service is subscribed. If CID service is detected, your phone will start suppressing the first ring after the
first call.
Note : Once first ring suppression is activated, the first ring before CID will be suppressed even after
you have unsubscribed the CID service. If you have unsubscribed the CID service and do not wish to
have the first ring suppressed, please power recycle the base.
Switch on/off the handset
To switch off your phone, long press
while in idle mode.
To switch on the power of your phone, press
The handset should be automatically turned on.
or return the handset to the charger.
25
EN
Other features
Sorting your Windows Live™ contact list
You can sort your Windows Live™ contact list according to your preference.
1. Press
. The contact list will be shown.
2. Press MENU softkey to enter the PC mode menu.
3. Press UP/DOWN
to select SORT CONTACTS. Press SELECT softkey.
4. You can sort your contact list by group, by name alphabetically or by presence.
Press UP/DOWN
to select the desire sorting method and press SELECT softkey.
5. Press BACK softkey to return to your contact list. Now the contact list will be sorted in the way of your
preference.
Change your online status
You can change your online status on the handset.
1. Press
. The contact list will be shown.
2. Press MENU softkey to enter the PC mode menu.
3. Press UP/DOWN
to select SET MY STATUS. Press SELECT softkey.
to select the status you would like to change into. Press SELECT softkey to
4. Press UP/DOWN
save.
Please refer to the following table for the meaning of the icons.
MESSENGER ONLINE
MESSENGER OFFLINE
MESSENGER AWAY
MESSENGER BUSY
MESSENGER BLOCKED
CONTACT
MESSENGER
CONVERSATION
MESSENGER ON THE
PHONE
MESSENGER GROUP
26
EN
Other features
Setup your Windows Live™ Messenger alert
You can get notification when you received a new email, contact online notification, IM invitation notification,
and Messenger alert.
1. Press
. The contact list will be shown.
2. Press MENU softkey to enter the PC mode menu.
3. Press UP/DOWN
to select SETUP ALERTS. Press SELECT softkey.
4. Select the item you would like to get an alert when notification is received and press SELECT softkey.
5. Select the way you want to be alert :
Select SILENT when you don't want to get alert tones,
select AUDIBLE when you want to hear the alert tones,
select NONE to turn off the alert.
6. Press SELECT softkey to save.
Personalizing your sounds
You can assign different ringing melodies for each handset at different volume levels.
You can select a different ringtone for Windows Live™ Messenger, telephone calls and intercom calls.
Selecting your handset's ringing volume and melody
1. Press MENU.
2. Press UP / DOWN
to select SOUNDS and press OK.
3. Select HANDSET and press OK.
4. Press LEFT / RIGHT
to adjust the ringer volume.
Press DOWN to select the Windows Live™ Messenger line melody.
5. Press LEFT / RIGHT
to select a melody for the Windows Live™ Messenger line; press DOWN to
select the telephone line melody.
6. Press LEFT / RIGHT
7. Press LEFT / RIGHT
to select the telephone line melody; press DOWN the select the internal line.
to select the internal line melody.
8. Press OK to save the settings.
Shortcut for turning handset ringer on/off
In idle mode, long press
to turn on/off the handset ringer.
appears to indicate the ringer is turned off. The handset will not emit any sound for any incoming call.
27
EN
Other features
Set key tones on/off
1. Press MENU.
2. Press UP / DOWN
3. Press UP / DOWN
to select SOUNDS and press OK.
to select HS KEY TONES and press OK.
4. The current setting will be shown. Press UP / DOWN
to select ON or OFF.
5. Press OK to save the settings.
Rename handset
You can give your phone a different name. If you have more than one handset, you can give each handset its
own name.
The handset name can be up to 10 characters long and it can be composed of A-Z, 0-9, and space.
1. Press MENU.
2. Press UP / DOWN
to select DISPLAY and press OK.
3. Press UP / DOWN
displayed.
to select HANDSET NAME and press OK. The current handset name is
4. Edit the handset name and press OK to confirm.
Set time
Once the base is powered up and connected to the PC, your handset will obtain the current time from the PC.
However, you can still adjust the clock manually. To adjust your clock :
1. In idle mode, press MENU.
2. Press UP / DOWN
3. Press UP / DOWN
4. Press LEFT / RIGHT
5. Press LEFT / RIGHT
to select DISPLAY, and then press OK.
to select CLOCK, and then press OK.
to change the HOUR, and then press DOWN.
to change the MINUTE.
If you set the time format of your clock to 12 hours, go to step 6.
If you set it to 24 hours, go to step 7.
6. Press DOWN. Press LEFT / RIGHT
to select AM/PM.
7. Press OK to confirm.
28
EN
Other features
Set the clock to 12 hours/24 hours format
To change your phone's time format :
1. In idle mode, press MENU.
2. Press UP / DOWN
3. Press UP / DOWN
to select DISPLAY, and then press OK.
to select TIME FORMAT. Press OK.
to select 12 HOURS or 24 HOURS.
4. Press UP / DOWN
5. Press OK to confirm.
Setting the alarm clock
Setting the alarm time
1. In idle mode, press MENU.
2. Press UP / DOWN
3. Press UP / DOWN
4. Press UP / DOWN
to select SETTINGS, and then press OK.
to select ALARM CLOCK. Press OK.
to select ON or OFF.
To set ON the alarm clock, press OK and continue to step 5.
OR
To set OFF the alarm clock, press OK to confirm.
5. Press LEFT / RIGHT
6. Press LEFT / RIGHT
to set the HOUR. Press DOWN.
to set the MINUTE.
If your phone's time format is set to 12 hours, go to step 7.
If it is 24 hours, go to step 8.
7. Press DOWN. LEFT / RIGHT
to set AM/PM.
8. Press OK to confirm.
The alarm tone rings for at most 1 minute. Press
to put the alarm to SNOOZE mode.
to turn off the alarm clock or the SNOOZE soft key
29
EN
Other features
Set the timer
1. In idle mode, press MENU.
2. Press UP / DOWN
3. Press UP / DOWN
4. Press LEFT / RIGHT
5. Press LEFT / RIGHT
6. Press LEFT / RIGHT
to select SETTINGS, and then press OK.
to select TIMER. Press OK.
to set the HOUR. Press DOWN.
to set the MINUTE. Press DOWN.
to set the SECOND.
7. Press OK to confirm. The timer starts counting and your can see the timer on display.
Stop timer ring tone
The countdown timer will ring once it finishes counting the time you set.
Press STOP. The countdown timer will stop ringing.
Note : When the timer is ringing, if you do not press any key within 1 minute, it will stop ringing
automatically.
Stopwatch
1. In idle mode, press MENU.
2. Press UP / DOWN
3. Press UP / DOWN
to select SETTINGS, and then press OK.
to select STOPWATCH. Press OK.
4. Press START. The stopwatch starts counting.
Press STOP. The stopwatch stops. You can choose to reset the stopwatch or cancel the stopwatch.
Press PAUSE. The stopwatch pauses counting. Press RESUME to start the stopwatch again from the
paused time.
Press CANCEL. The stopwatch is deactivated.
30
EN
Other features
Auto-answer on/off
Auto answer gives you the convenience of answering a call by just picking up the phone from the cradle or
charger. You don't need to press
.
1. In idle mode, press MENU.
2. Press UP / DOWN
3. Press UP / DOWN
4. Press UP / DOWN
to select SETTINGS, and then press OK.
to select AUTO ANSWER. Press OK.
to select ON or OFF. Press OK.
Language setting
Your phone comes with several languages. When you change your phone's language, the menus will be
displayed in the chosen language.
1. In idle mode, press MENU.
2. Press UP / DOWN
3. Press UP / DOWN
4. Press UP / DOWN
to select DISPLAY, and then press OK.
to select LANGUAGE. Press OK.
to select the preferred language. Press OK to save settings.
Set dialling mode (Tone/Pulse)
Dialling mode applies only when you are making a telephone call. Your phone is by default set to tone dialling.
You can switch to pulse dialling if necessary.
1. In idle mode, press MENU.
2. Press UP / DOWN
3. Press UP / DOWN
4. Press UP / DOWN
to select SETTINGS, and then press OK.
to select DIAL MODE. Press OK.
to select TONE or PULSE dialling. Press OK to save.
Temporary tone dialling in pulse dial mode
If the dialling mode is set to pulse, you can long press
to set temporary tone dialling during off
hook. d will be displayed on the screen. All the following digits will be dialled as tones until you hang up.
31
EN
Other features
Recall duration
This option is helpful when using operator services. The default value of recall time that is preset in your
VOIP 433 should be the best suited for your country network and therefore you should not need to change it.
1. In idle mode, press MENU.
2. Press UP / DOWN
3. Press UP / DOWN
4. Press UP / DOWN
to select SETTINGS, and then press OK.
to select RECALL. Press OK.
to select the desire recall duration. Press OK.
Pause duration
Your phone comes with 2 factory programmed pause durations.
1. In idle mode, press MENU.
2. Press UP / DOWN
3. Press UP / DOWN
4. Press UP / DOWN
to select SETTINGS, and then press OK.
to select PAUSE. Press OK.
to select PAUSE 1 or PAUSE 2. Press OK.
Set display contrast
1. In idle mode, press MENU.
2. Press UP / DOWN
3. Press UP / DOWN
4. Press LEFT / RIGHT
to select DISPLAY, and then press OK.
to select CONTRAST. Press OK.
to adjust the display contrast. Press OK to save the desire settings.
32
EN
Other features
PIN code setting
A PIN (personal identification number) code is required to access the registration, delete handset, and reset
mode.
The factory-preset code is "0000". You can change it to a unique code of your own. A PIN code can be up to
8 digits long.
1. In idle mode, press MENU.
2. Press UP / DOWN
3. Press UP / DOWN
to select SYSTEM, and then press OK.
to select CHANGE PIN. Press OK.
4. Enter the current PIN
5. Enter the new PIN
and press OK.
and press OK.
6. Repeat the new PIN
and press OK to confirm.
7. Press OK to save settings.
Note : You will hear a reject tone and wrong PIN is displayed if the current PIN is incorrect or the new
PIN is not repeated correctly. Follow steps 3 to 7 and try again.
Restore handset default settings
You can reset the display, sounds, and other settings of your phone. Refer to the chapter “Default settings”,
page 38.
1. In idle mode, press MENU.
2. Press UP / DOWN
3. Press UP / DOWN
to select SYSTEM, and then press OK.
to select RESET. Press OK.
4. Enter the PIN code
(by default PIN is "0000") and press OK to confirm.
5. Press OK to confirm.
33
EN
Other features
Set Baby call on/off
Baby call allows you to dial out a programmed number via the telephone line by pressing any key on the handset
(except the OFF key ).
1. In idle mode, press MENU.
2. Press UP / DOWN
3. Press UP / DOWN
4. Press LEFT / RIGHT
to select SETTINGS, and then press OK.
to select BABY CALL. Press OK.
to select ON.
5. Press DOWN, enter or edit the number and press OK to confirm.
BABY CALL is displayed when you return to standby mode.
To turn off baby call,
1. Press the CANCEL soft key.
2. Press OK to confirm.
Registering
Register a new handset to base station
Each base can register up to 4 handsets.
1. In idle mode, press MENU.
2. Press UP / DOWN
3. Press UP / DOWN
to select SYSTEM, and then press OK.
to select REGISTER. Press OK.
4. Before you enter the PIN (by default PIN is "0000"), long press
on the base for 4 seconds.
5. Enter the PIN code
and press OK.
Note : If the base is full, the base would not go into registration mode. See the section “Unregister a
handset”, page 35 to unregister a currently registered handset.
34
EN
Other features
Unregister a handset
A handset can unregister another handset registered to the same base. It can also un-register itself.
1. In idle mode, press MENU.
2. Press UP / DOWN
3. Press UP / DOWN
4. Press UP / DOWN
to select SYSTEM, and then press OK.
to select DELETE HS. Press OK.
to select the handset you would like to un-register and press OK.
5. Enter the PIN code
(by default PIN is "0000") and press OK.
6. Press OK again to confirm.
Select the base station
If your handset is registered to more than 1 base, you can select which base the handset will use.
1. In idle mode, press MENU.
2. Press UP / DOWN
3. Press UP / DOWN
4. Press UP / DOWN
to select SYSTEM, and then press OK.
to select BASE SELECT. Press OK.
to select the base to use and press OK.
35
EN
Using the intercom
Note : You need at least 2 handsets to carry out the functions mentioned in this chapter.
Make an internal call
You can call someone in the house by using the intercom function on your phone.
To make an intercom call :
1. Press INT soft key.
2. Select the handset you want to call and press OK
OR
enter the number of the handset that you want to call.
Note : You will hear a busy tone if the other handset is not available.
Make an internal call during an external call
While you are on an outside call, you can put the outside call on hold and make a call (inquiry call) to someone
in the house.
To make an inquiry call, during an outside call :
1. Press OPTIONS.
2. Press UP / DOWN
to select INTERCOM and press OK.
3. Press UP / DOWN
to select the handset you want to call and press OK
OR
enter the number of the handset that you want to call.
4. Wait for the other handset to answer your call.
Note : To return to the external call, press OPTIONS and select EXIT CONF. option and press
OK.
Transfer an external call to another handset
Make an internal call during a telephone call
1. Press OPTIONS.
2. Press UP / DOWN
to select INTERCOM and press OK.
3. Press UP / DOWN
to select the handset you want to call and press OK
OR
enter the number of the handset that you want to call.
4. When the other handset has answered your call, press
or place the handset on cradle.
The external call is transferred.
OR
When the other handset has answered your call, press OPTIONS, select TRANSFER and press OK.
36
EN
Using the intercom
Put the PC call on hold
1. Press HOLD, the message PC CALL ON HOLD should be shown on all
handsets that have a working link with the base.
2. Any handset can press the ANSWER soft key to pick up the on hold call.
Make an internal call during a Windows Live™ Messenger call
1. While the Windows Live™ Messenger call is on hold (refer to Put the PC call on hold, before), press
INT and select the handset to intercom with.
2. Talk to the user of the other handset when the intercom call is picked up.
3. To return to the PC call, end the intercom call by pressing
.
4. If the PC call is still waiting, the ANSWER soft key should be available. Press the ANSWER soft key to
pick up the on hold PC call.
Make a conference call
You can invite another handset to join an external telephone call.
During an outside call,
1. Press OPTIONS. Select INTERCOM and press OK.
2. Select the handset you want to call and press OK
OR
enter the number of the handset that you want to call.
3. When the other handset has answered your call, press OPTIONS and select CONFERENCE.
You are then in a conference call.
Note : Any handset hangs up during a conference call will leave the other handset still connecting with
the external call.
Answer a call from the telephone line while
on Windows Live™ Messenger call (Multi-handset)
The other handsets will ring the telephone melody.
Press
on the other handset to pick up the call.
Answer a Windows Live™ Messenger while on a call on the
telephone line (Multi-handset)
The other handsets will ring the Windows Live™ Messenger melody.
Press
on the other handset to pick up the call.
37
EN
Default settings
Handset name* :
Time Format :
Empty
24 hrs
00:00
Party
Wallpaper :
Wallpaper 1
OFF
Auto answer :
Time :
Menu language :
Pause duration :
Ringer volume :
Baby call :
Language 1
Pause 1
Medium
OFF
Ringer melody (fixed line) :
Ringer melody (Windows
Live™ Messenger) :
Dring
Ringer melody (Internal call) :
Alarm :
Party
OFF
Baby call number :
Base select :
Empty
Auto
Key tone :
ON
Message waiting indication :
System PIN :
OFF
Confirm tone :
Countdown Timer :
Stop watch :
ON
0000
OFF
Quick dial :
OFF
OFF
Quick Dial number :
Keypad lock :
Empty
OFF
Recall duration :
Dial mode :
Recall 1
Tone
Reset
Reset
Level 2
Earpiece volume :
Last Call Timer :
Dialled Call Timer :
Medium
Reset
Received Call Timer :
All Calls Timer :
Contrast :
Reset
*This feature/function will not be set back to default after reset.
38
EN
Troubleshooting
Problems
Solutions
• Make sure that the adapter, the phone cord and USB are
connected properly.
No dial tone when pressing
.
• Check that the batteries are fully charged and installed
properly.
• This phone does not work during power failure.
• Register your handset to a base.
• Move closer to the base unit.
Signal icon
is flashing.
The phone does not ring.
• Make sure the adapter, the phone cord and USB are connected
properly.
• Move the handset closer to the base unit.
• Turn on the ringer.
When the handset is placed on the
charger, no beep is heard.
• Take the handset off the charger and put it back again.
• Clean charging contacts with a clean and dry cloth.
• Turn on the handset tone from the SOUNDS Menu.
• There will be no beep if the handset's power is turned off
previously.
The call waiting call cannot be
answered.
• Check with your local phone company and select the correct
recall duration.
• End the current call
the second call.
, and press
again to pick up
Battery icon remains empty although
the handset has charged for 24
hours.
• Please contact your dealer to purchase new rechargeable
battery.
• Check to make sure the battery icon is scrolling while being
charged.
No symbol on the display.
• Charge battery.
• Make sure the batteries are in the compartment and your
handset is ON.
Bad audio quality (crackles, echo,
etc.).
• Install the base unit in a different room or higher location or
away from other electronic appliances.
• Move closer to the base unit.
Contact list returns error.
• Check if your base is connected to the PC.
• Check if Windows Live™ Messenger is running on the PC.
• Move the handset closer to the base if it is out of range.
If the above solutions do not help, remove the power from the handset and the base and restart Windows
Live™ Messenger. Wait for 15 minutes and try again.
39
EN
Information
Safety information
This equipment is not designed to make emergency calls when the power fails. An alternative has to be made
available to allow emergency calls.
Warranty
Conformity
Safety precautions
Do not allow the handset to come into contact with water. Do not open the handset or the base station. You
could be exposed to high voltages. Do not allow the charging contacts or the batteries to come into contact
with conductive materials. Never use any battery type other than the one supplied : risk of explosion.
WARNING ! Never use non-rechargeable batteries; use only the recommanded type supplied with
this telephone.
Replace handset batteries
40
EN
Information
Electric, Magnetic and Electromagnetic Fields
("EMF")
1. Philips Royal Electronics manufactures and sells many consumers oriented products, which usually, as with
any electronic apparatus, have the ability to emit and receive electro magnetic signals.
2. One of Philips' leading Business Principles is to take all necessary health and safety precautions for our
products, to comply with all applicable legal requirements and to stay well within the EMF standards
applicable at the time of producing the products.
3. Philips is committed to develop, produce and market products that cause no adverse health effects.
4. Philips confirms that if its products are handled properly for their intended use, they are safe to use
according to scientific evidence available today.
5. Philips plays an active role in the development of international EMF and safety standards, enabling Philips
to anticipate further developments in standardization for early integration in its products.
Environmental care
Please remember to observe the local regulations regarding the disposal of your packaging materials, exhausted
batteries and old phone and, where possible, promote their recycling.
Recycling & disposal
Disposal instructions for old products :
The purpose of the WEEE directive (Waste Electrical and Electronic Equipment; 2002/96/EC) is to ensure that
products are recycled using best available treatment, recovery and recycling techniques to ensure human health
and high environmental protection.
Your product is designed and manufactured with high quality materials and components, which can be recycled
and reused.
Do not dispose of your old product in your general household waste bin.
Inform yourself about the local separate collection system for electrical and electronic products
marked by this symbol.
Use one of the following disposal options :
1. Dispose of the complete product (including its cables, plugs and accessories) in the designated WEEE
collection facilities.
2. If you purchase a replacement product, hand your complete old product back to the retailer. He should
accept it as required by the WEEE directive.
Philips has marked the packaging with standard symbols designed to promote the recycling and
appropriate disposal of your eventual waste.
A financial contribution has been paid to the associated national recovery & recycling system.
The labelled packaging material is recyclable.
41
EN
A
Account 13
Add entry in phonebook 18
Alarm clock,set 29
Dual line phone 8
Answer a call 15
Answer a call from the telephone line while on
Windows Live™ Messenger call
(Multi-handset) 37
Edit phonebook entry 19
Answer a call from Windows Live™
Messenger 14
Emergency Calls 13
Answer a Windows Live™ Messenger while on
a call on the telephone line
(multi-handset case) 37
Assign a quick dial key 20
Auto-answer on/off 31
B
Baby call on/off 34
Base station 8
Base station, select 35
Batteries, insert 10
Battery 4, 11
C
Call 13
Call from telephone line 14
Call from the Contact List 15
Call from the handset phonebook 15
Call in progress 17
Internal call during a Windows Live™ Messenger
Call log 22
Call timer 13
CallerID first ring suppression 25
Chaining Dialling 15
Key tones on/off 28
Change a quick dial key 20
Change your online status 26
Clock time format 29
Conference call 37
Conformity 40
Connect 10
Contact list 8
Contents 3
Main menu 12
Contrast 32
Make an Windows Live™ Messenger call 14
Copy call log entry in the phonebook 22
D
Matching your phonebook record 23
Microphone, mute 17
Default settings 38
Mute 17
Delete a call log entry 22
Delete a quick dial key 21
Delete all the call log entries 23
Delete entire list of dialled numbers 24
Delete last numbers dialled 24
Delete phonebook entry 19
Deny a Windows Live™ Messenger call 14
O
Off Hook Phonebook Dialling 15
P
Paging 25
Paging key 8
Pause 18
Pause duration 32
42
Phonebook 18, 20
Stop paging 25
Pin code 33
Power requirements 4
Pre-dial 15
Put the PC call on hold 37
Q
Quick dial 20
Switch on/off the handset 25
Quick dialling 16
R
Range 11
Recall 16
Recall duration 32
Transfer an external call to another handset 36
Record a number from dialled list into
phonebook 24
Recycling & disposal 41
Redial a number 23
Registering 34
Rename handset 28
Replace handset batteries 40
Restore handset default settings 33
Ring melody, handset 27
Ring volume, handset 27
S
View and edit phonebook entry 19
View available phonebook space 21
View call log 22
Safety 4, 40
View the dialled list 23
VIP melody 18
W
Search by letter, phonebook 19
Second incoming call from the other line 16
Setup your Windows Live™ Messenger alert 27
Shortcut for turning handset ringer on/off 27
Snooze mode 29
Warranty 40
What else you need 6
What’s in the box 6
Windows Live™ Messenger account 13
Windows Live™ Messenger Menu 14
Sorting your Windows Live™ contact list 26
Sounds 27
Status icons 26
43
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.
2006 © Koninklijke Philips Electronics N.V. All rights reserved.
3111 285 30042
|