Philips Audio CD Recorder CDR770 User Manual

Audio CD Recorder  
CDR770/771  
Instructions for use  
Mode d'emploi  
Instrucciones de manejo  
Bedienungsanleitung  
Gebruiksaanwijzing  
Istruzioni per l'uso  
Brugsanvisning  
Bruksanvisning  
Käyttöohje  
Manual de utilização  
O‰ËÁ›Â˜ ¯Ú‹Ûˆ˜  
OPEN / CLOSE  
REC  
PLAY  
/
P
AUSE  
STOP  
RECORD  
TYPE  
FINALIZE  
ERASE  
SOURCE  
DISPLA  
Y
PROGRAM  
PROGRAM  
SCROLL  
SCROLL  
STORE/  
STORE/  
EASY JOG  
EASY JOG  
CANCEL/  
DELETE  
MENU  
MENU  
REM  
RECORD  
TIME  
6
TRACK  
TEXT  
LEVEL  
TOTAL  
REM  
16  
TRACK  
TIME  
STEP  
1
2
3
4
5
7
8
9
10  
11  
1
2
13  
14  
1
5
17  
1
8
19  
20  
SYNC  
MANUAL  
SHUFFLE  
REPEA  
T
AUDIO CD RECORDABLE/REWRIT  
ABLE  
Recordable  
PROGRAM  
SHUFFLE  
REPEAT  
DIGITAL  
OPTICAL  
CD  
RW  
1
1
ALL  
ANALOG  
SCAN  
TRACK  
ENTER  
INFRA RED  
ON / OFF  
PHONES  
CDR77X AUDIO CD RECORDER  
INSTALLATION  
Connections general  
Analog connections  
For recording the following inputs are present:  
- Digital optical input.  
- Digital coaxial input.  
Analog connection is required for playback of CDs (use cable  
2) and for recording from external analog sources  
(use cable 1).  
- Analog input.  
For playback the following outputs are present:  
- Digital coaxial output.  
- Analog output.  
We advise you to connect these to the CD input on your  
amplifier.  
L
L
R
RECEIVER  
R
IN  
OUT  
TAPE  
2
The connections you make will depend upon the possibilities  
your audio equipment offers. Please refer to the user manuals  
for your other audio equipment first.  
1
CD RECORDER  
L
L
Digital recordings (optical or coaxial) give the best  
performance in audio and usability (e.g. auto-track).  
R
R
IN  
OUT  
ANALOG  
IN  
DIGITAL  
OUT  
IN  
OPTICAL  
(The digital optical connection is less sensitive to external  
disturbances).  
If your equipment does not offer digital connections, the high  
quality Analog-Digital-Convertor of your CD recorder will  
ensure very good audio performance when recordings are  
made from the analog input.  
Use the audio cables supplied. Connect the red plugs to the  
R sockets, and the white plugs to the L sockets.  
1 For recording, connect cable 1 between the ANALOG IN-  
sockets on the CD recorder and the CDR LINE- or TAPE OUT-  
sockets of an amplifier.  
Playback via the digital coaxial output of the CD recorder  
gives the best audio performance.  
If your equipment does not offer digital connections, the high  
quality Digital-Analog-Convertor of the CD recorder ensures a  
very good sound quality via the analog output.  
Note: For recording directly from a CD player, the analog  
input of the CD recorder should be connected to the  
analog output of the CD player.  
We advise you to always establish both digital and analog  
connections. In this way you can always make analog  
recordings when digital recording is not possible.  
2 For playback, connect cable 2 between the ANALOG OUT-  
sockets on the CD recorder and the input sockets of an  
amplifier e.g. TAPE IN, CDR or AUX.  
We have described the most common ways of connecting the  
CD recorder. If you still have difficulties with the connections  
you can always contact the Philips Consumer Service desk in  
your country.  
Note: Never use the PHONO input.  
11  
INSTALLATION  
Digital coaxial connections  
Digital optical connections  
Digital coaxial connection is only required in case you wish to  
record from a CD player with a digital coaxial output.  
Digital optical connection is only required in case you wish to  
record from a CD player with a digital optical output.  
L
RECEIVER  
L
RECEIVER  
L
L
R
R
R
R
IN  
IN  
OUT  
OUT  
2
TAPE  
2
TAPE  
1
1
L
L
L
L
CD RECORDER  
CD RECORDER  
R
R
R
R
IN  
IN  
OUT  
OUT  
ANALOG  
IN  
ANALOG  
IN  
OUT  
OUT  
DIGITAL  
GITAL  
I
IN  
OPTAL  
OPTICAL  
3
4
L
L
CD PLA  
CD PLA  
R
YER  
OUT  
R
YER  
OUT  
ANALOG  
OUT  
ANALOG  
OUT  
DIGITAL  
OUT  
DIGITAL  
OUT  
OPTICAL  
OPTICAL  
Use the digital coaxial cable supplied.  
When connecting the Digital  
Optical cable, make sure it  
is fully inserted until  
1 For recording, connect the cable 3 between the DIGITAL  
IN-socket on the CD recorder and the DIGITAL OUT-socket of  
a CD player.  
there is a click.  
Note: Your CD recorder is equipped with a digital coaxial  
output. This output can be used for digital playback.  
1 Remove the dust caps from the digital optical connection.  
(We recommend you save the cap).  
2 For recording, connect a fibre-optic cable 4 between the  
digital optical input of the CD recorder and the digital-  
optical output of a CD player.  
Note: For playback, the digital coaxial output or analog output  
should be connected to an amplifier.  
12  
INSTALLATION  
Power supply  
Inserting batteries in the remote control  
1 Plug the power cord supplied into the MAINS connector on  
the CD recorder, then into a mains socket.  
2 Press ON/OFF.  
The CD recorder will switch on.  
1 Open the battery compartment cover.  
Note:  
2 Insert 2 batteries (“AA”, LR-6 or UM-3; as supplied) as  
shown.  
- If the CD recorder is in Standby mode (red led on), press any  
key to activate the recorder.  
- The CD recorder will automatically adjust to the local mains  
voltage.  
- When the CD recorder is in the ‘OFF’ position, it is still  
consuming some power. If you wish to disconnect your  
player completely from the mains, withdraw the plug from  
the AC outlet.  
3 Replace the cover.  
Note: We recommend you use 2 batteries of the same type  
and condition.  
Batteries contain chemical substances, so they should  
be disposed of properly.  
Setup recommendations  
- Place the CD recorder on a solid, vibration free surface.  
- Do not place the CD recorder near a source of heat or in  
direct sunlight.  
- Do not use the CD recorder under extremely damp  
conditions.  
- If the CD recorder is placed in a cabinet, make sure that a  
2.5 cm space remains free on all sides of the CD recorder  
for proper ventilation.  
Important:  
- Do not put the CD recorder on top of other equipement that  
heats up the CD recorder (e.g. receiver or amplifier).  
13  

Targus USB 30 ExpressCard 410 2207 001A User Manual
Tannoy CYBER SHOT C902 User Manual
StarTechcom HSB220SAT25B User Manual
Sony WALKMAN WM FQ01 User Manual
Seagate Computer Drive ST3300820A User Manual
Samsung TS HB33 User Manual
Salton ME2DTMB User Manual
Panasonic KXL CB30AU User Manual
Panasonic CF VDD285 User Manual
Nokia CARBON ARTE 8800 User Manual