Philips AJ5300D User Manual

Register your product and get support at  
AJ5300D  
User manual  
Warning  
1 Important  
Never remove the casing of this clock radio.  
Never place this clock radio on other electrical  
equipment.  
Keep this clock radio away from direct sunlight, naked  
flames or heat.  
To reduce the risk of fire or electric shock, do not  
expose this apparatus to rain or moisture.  
Ensure that you always have easy access to the power  
cord, plug or adapter to disconnect this clock radio  
from the power.  
Safety  
Heed all warnings, and follow all  
instructions.  
Do not block any ventilation openings.  
Install in accordance with the  
manufacturer's instructions.  
Do not install near any heat sources such  
as radiators, heat registers, stoves, or other  
devices (including amplifiers) that produce  
heat.  
Protect the power cord from being  
walked on or pinched, particularly at plugs,  
convenience receptacles, and the point  
where they exit from the clock radio.  
Only use attachments/accessories specified  
by the manufacturer.  
Unplug the clock radio during lightning  
storms or when unused for long periods  
of time.  
Refer all servicing to qualified service  
personnel. Servicing is required when  
the apparatus has been damaged in any  
way, such as power-supply cord or plug  
is damaged, liquid has been spilled or  
objects have fallen into the apparatus, the  
apparatus has been exposed to rain or  
moisture, does not operate normally, or  
has been dropped.  
The clock radio shall not be exposed to  
dripping or splashing.  
Do not place any sources of danger on the  
clock radio (e.g. liquid filled objects, lighted  
candles).  
Where the plug of the Direct Plug-in  
Adapter is used as the disconnect device,  
the disconnect device shall remain readily  
operable.  
4
EN  
2 Your Docking  
Entertainment  
System  
Congratulations on your purchase, and  
welcome to Philips!To fully benefit from the  
support that Philips offers, register your product  
If you contact Philips, you will be asked for the  
model and serial number of this apparatus.The  
model number and serial number are on the  
bottom of the apparatus.Write the numbers  
here:  
Model No. __________________________  
Serial No. ___________________________  
Introduction  
With this clock radio, you can  
listen to FM radio;  
enjoy audio from iPod/iPhone or an  
external device;  
set alarms to ring at different time;  
choose buzzer, radio, or audio in iPod/  
iPhone as your alarm source;  
experience various features brought by  
HomeStudio app.  
What's in the box  
Check and identify the contents of your  
package:  
Main unit  
DC adaptor  
User manual  
EN  
5
Overview of the main unit  
a
f
b
c
e
d
g
h
l
k
j
i
e -VOLUME +  
a AL1/AL2  
Adjust volume.  
Set alarm.  
View alarm settings.  
Activate/deactivate alarm timer.  
f SNOOZE/BRIGHTNESS  
Snooze alarm.  
Adjust display brightness.  
b SOURCE  
Select source.  
Turn on/off the clock radio.  
g TIME SET  
Set the time.  
c
h
TUNING  
Tune or scan to an FM radio station.  
d DOCK  
Dock for iPod/iPhone.  
6
EN  
i DC IN  
3 Get started  
Power supply socket.  
j FM ANTENNA  
Improve FM reception.  
Caution  
k MP3-LINK  
Use of controls or adjustments or performance of  
procedures other than herein may result in hazardous  
radiation exposure or other unsafe operation.  
Connect an external audio device.  
l SLEEP  
Set sleep timer.  
Always follow the instructions in this chapter in  
sequence.  
Connect power  
Caution  
Risk of product damage! Make sure that the power  
voltage corresponds to the voltage printed on the back  
or underside of the unit.  
Risk of electric shock! When you unplug the power  
adapter, always pull the plug from the socket. Never  
pull the cord.  
Before connecting the power adapter, make sure that  
you have completed all other connections.  
Use the supplied power adapter only.  
EN  
7
4 Play  
Turn on  
Press  
.
» The clock radio switches to the last  
selected source.  
Play from iPod/iPhone  
Switch to standby mode  
You can enjoy audio from iPod/iPhone through  
this clock radio.  
Press to switch the clock radio to standby  
mode.  
» The clock (if set) is displayed.  
Compatible iPod/iPhone  
The unit supports the following iPod, iPhone  
models:  
Made for.  
Set time and date  
iPod classic  
iPod touch (1st, 2nd, 3rd, and 4th  
generation)  
iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th  
1 In standby mode, press and hold TIME SET  
on the back of your clock radio for more  
than two seconds.  
» [12H] or [24H] begins to blink.  
generation)  
iPhone 4S  
iPhone 4  
iPhone 3GS  
iPhone 3G  
iPhone  
2 Press  
/
repeatedly to select 12/24  
hour format.  
3 Press TIME SET to confirm.  
» The hour digits begin to blink.  
4 Repeat steps 2-3 to set hour and minute.  
Install HomeStudio App  
Note  
Philips HomeStudio app brings a suite of new  
features to your clock radio, including FM radio  
programming and a multi-function alarm clock.  
To enjoy more features, you are recommended  
to install this free HomeStudio app.  
If clock is not manually set, when iPod/iPhone is  
connected, the unit synchronizes time from the iPod/  
iPhone automatically.  
Tip  
Note  
The accuracy of the transmitted time depends on the  
docked iPod/iPhone that transmits the time signal.  
Make sure that your iPod/iPhone is connected to the  
Internet.  
1 Press SOURCE repeatedly to select  
DOCK mode.  
2 Insert your iPod/iPhone into the dock.  
8
EN  
1 Tap HomeStudio icon on your iPod/  
iPhone.  
» The clock/alarm setting screen appears.  
SOURCE  
3
For the first-time use, you will be asked to  
install the HomeStudio app on your iPod/  
iPhone.  
4 Tap [Yes] (yes) to accept the installation  
request.  
5 Follow the on-screen instructions to  
complete the installation.  
2 Slide left to display the following screen.  
Philips HomeStudio app only can be installed in  
the following iPod, iPhone models:  
iPod touch (1st, 2nd, 3rd, and 4th  
generation)  
iPhone 4S  
iPhone 4  
iPhone 3GS  
iPhone 3G  
iPhone  
Play music in the iPod/iPhone  
3 Select a track from the playlist, and then  
press .  
Note  
» Music streams from your iPod/iPhone  
to the clock radio.  
Make sure that you have installed the HomeStudio app  
on your iPod/iPhone.  
EN  
9
Use more features with "HomeStudio  
App"  
Note  
Make sure that your iPod/iPhone is inserted into the  
clock radio.  
Set clock, alarm, and sleep timer:  
1 Launch the HomeStudio app.  
2 On the screen below, tap the setting icon  
.
» You can set clock, sleep timer, and  
alarm for your clock radio.  
Store FM radio stations manually:  
1 Slide right to display the screen as below.  
2 Press  
to tune to a radio station.  
3 Press [SAVE] (save), and then press a  
preset number.  
» [SAVE] (save) and the selected  
number turns blue.  
» The radio station is saved  
successfully.  
4 If [SAVE] (save) is activated, you can tune  
to other stations, and press a number to  
save stations directly.  
Note  
The alarms set with your clock radio will appear under  
[Dock Alarm] (dock alarm) category.  
You can also set more alarms by tapping on the top  
right of the alarm setting screen.  
10 EN  
Tip  
Listen to radio  
If you need not preset more stations, press [SAVE]  
(save) again to deactivate it (in gray).  
Note  
Keep the unit away from other electronic devices to  
avoid radio interference.  
For better reception, do not place iPod/iPhone into  
the dock when you listen to the radio. Fully extend and  
adjust the position of the FM antenna.  
Use more features:  
Slide right to the next screen.You can:  
set the theme;  
share the information;  
set the location for weather report;  
choose temperature unit;  
select month/day display mode;  
store radio stations automatically by  
tapping [Radio Auto Program] (radio  
auto program).  
Tune to FM radio stations  
You also can tune to radio stations from your  
clock radio.  
» [Searching] (searching) is displayed.  
1 Press SOURCE repeatedly to select FM  
tuner.  
» All available stations are stored.  
2 Press and hold  
/
on the back  
» The first stored radio station is  
of your clock radio for more than two  
seconds.  
broadcast automatically.  
» The radio tunes to a station with  
strong reception automatically.  
3 Repeat step 2 to tune to more stations.  
To tune to a station manually:  
Press  
/
repeatedly until you find optimal  
reception.  
Play from an external device  
You can also listen to an external audio device  
through this clock radio.  
1 Press SOURCE to select the AUX source.  
2
Connect the MP3 link cable (not supplied)  
to:  
Charge the iPod/iPhone  
the MP3-LINK socket (3 5mm) at the  
back of your clock radio.  
the headphone socket of an external  
device.  
When your clock radio is connected to power,  
the docked iPod/iPhone begins to charge  
automatically.  
3 Start to play the device (see the user  
Remove the iPod/iPhone  
manual of the device).  
Pull the iPod/iPhone out of the dock.  
EN 11  
5 Other features  
Adjust volume  
Set alarm timer  
Set alarm  
You can set two alarms to ring at different time.  
Buzzer, FM radio, or your last listened audio in  
the iPod/iPhone can be selected as alarm sound.  
VOLUME  
Note  
Make sure that you have set the clock correctly.  
1 Press and hold AL1/AL2 for more than  
two seconds to activate alarm setting  
mode.  
» The hour digits and alarm icon begin  
to blink.  
2 Press  
/
repeatedly set the hour.  
3 press AL1/AL2 to confirm.  
» The minute digits begin to blink.  
4 Repeat steps 2-3 to set the minute, select  
an alarm source (buzzer, FM radio, or  
dock), and adjust volume.  
Tip  
If iPod/iPhone is selected as alarm source, but no iPod/  
iPhone is connected, the clock radio switches to buzzer  
source instead.  
For the alarm(s) set through the clock radio, you  
can also select the nature sounds stored in the  
HomeStudio app as alarm sound.  
Activate/deactivate alarm timer  
1 Press AL1/AL2.  
» The alarm settings are displayed.  
12 EN  
2 Press AL1/AL2 repeatedly to activate or  
deactivate the alarm timer.  
6 Product  
information  
» [AL1] or [AL2] is displayed if the alarm  
timer is on and disappears if it is off.  
To stop the ringing alarm, press the  
corresponding AL1/AL2.  
» The alarm repeats ringing for the next  
Note  
day.  
Product information is subject to change without prior  
notice.  
Snooze alarm  
When alarm sounds, press SNOOZE.  
» The alarm snoozes and repeats ringing  
nine minutes later.  
Specifications  
Amplifier  
Set sleep timer  
Rated Output Power  
Frequency Response  
Signal to Noise Ratio  
Total Harmonic Distortion  
Aux Input (MP3 link)  
2 X 2 W RMS  
40-20000 Hz  
>65 dB  
This clock radio can switch to standby mode  
automatically after a preset period.  
Press SLEEP repeatedly to select the sleep  
timer period (in minutes).  
<1%  
0.6V RMS 10  
k ohm  
» When the sleep timer is activated,  
appears.  
To deactivate the sleep timer, press SLEEP  
Tuner (FM)  
repeatedly until OFF appears.  
Tuning range  
87 5-108  
MHz  
Adjust display brightness  
Tuning grid  
Sensitivity  
- Mono, 26 dB S/N Ratio  
- Stereo, 46 dB S/N Ratio  
Search Selectivity  
50 KHz  
Press BRIGHTNESS repeatedly to select  
different brightness levels.  
<22 dBf  
<46 dBf  
30 dBf  
Speakers  
Speaker Impedance  
Sensitivity  
4 ohm  
>82 dB/m/W  
EN 13  
General information  
7 Troubleshooting  
AC power (power  
Brand name: Philips;  
adapter)  
Model:Y12FE-050-  
2000B;  
Warning  
Input: 100-240V~, 50-  
60 Hz; 0.35 A;  
Output: 5V 2000  
mA;  
Never remove the casing of this device.  
To keep the warranty valid, never try to repair  
the system yourself.  
Operation Power  
Consumption  
Standby Power  
Consumption  
Dimensions: Main  
Unit (W x H x D)  
Weight:  
<10 W  
If you encounter problems when using this  
device, check the following points before  
requesting service. If the problem remains  
unsolved, go to the Philips Web page (www.  
philips.com/support).When you contact Philips,  
make sure that the device is nearby and the  
model number and serial number are available.  
<1 W  
283 x 118 x 112 mm  
-Main Unit  
-With Packing  
0.658 kg  
0.820 kg  
No power  
Ensure that the AC power plug of the unit  
is connected properly.  
Ensure that there is power at the AC  
outlet.  
No sound  
Adjust the volume.  
No response from the unit  
Disconnect and reconnect the AC power  
plug, then turn on the unit again.  
Poor radio reception  
Increase the distance between the unit and  
yourTV orVCR.  
Fully extend the FM antenna.  
Alarm does not work  
Set the clock/alarm correctly.  
Clock/alarm setting erased  
Power has been interrupted or the power  
plug has been disconnected.  
Reset the clock/alarm.  
14 EN  
because correct disposal helps to prevent  
negative consequences for the environmental  
and human health.  
8 Notice  
Environmental information  
All unnecessary packaging has been omitted.  
We have tried to make the packaging easy to  
separate into three materials: cardboard (box),  
polystyrene foam (buffer) and polyethylene  
(bags, protective foam sheet.)  
Your system consists of materials which can  
be recycled and reused if disassembled by  
a specialized company. Please observe the  
local regulations regarding the disposal of  
packaging materials, exhausted batteries and old  
equipment.  
This product complies with the radio  
interference requirements of the European  
Community.  
Any changes or modifications made to this  
device that are not expressly approved by  
Philips Consumer Lifestyle may void the user’s  
authority to operate the equipment.  
Your product is designed and manufactured  
with high quality materials and components,  
which can be recycled and reused.  
“Made for iPod” and “Made for iPhone”  
mean that an electronic accessory has been  
designed to connect specifically to iPod or  
iPhone respectively, and has been certified by  
the developer to meet Apple performance  
standards.Apple is not responsible for the  
operation of this device or its compliance with  
safety and regulatory standards. Please note that  
the use of this accessory with iPod or iPhone  
may affect wireless performance.  
iPod and iPhone are trademarks of Apple Inc.,  
registered in the U.S. and other countries.  
2012 © Koninklijke Philips Electronics N.V.All  
rights reserved.  
Specifications are subject to change without  
notice.Trademarks are the property of  
Koninklijke Philips Electronics N.V. or their  
respective owners. Philips reserves the right  
to change products at any time without being  
obliged to adjust earlier supplies accordingly.  
When this crossed-out wheeled bin symbol is  
attached to a product it means that the product  
is covered by the European Directive 2002/96/  
EC.  
Please inform yourself about the local separate  
collection system for electrical and electronic  
products.  
Please act according to your local rules and  
do not dispose of your old products with your  
normal household waste. Correct disposal of  
your old product helps to prevent potential  
negative consequences for the environment and  
human health.  
Note  
Your product contains batteries covered by  
the European Directive 2006/66/EC, which  
cannot be disposed with normal household  
waste.Please inform yourself about the local  
rules on separate collection of batteries  
The type plate is located on the bottom of the  
apparatus.  
EN 15  
Specifications are subject to change without notice  
© 2012 Koninklijke Philips Electronics N.V.  
All rights reserved.  
AJ5300D_05_UM_V1.0  

Tripp Lite NB1099BK User Manual
Toshiba MK1665GSX User Manual
Tannoy HCB 700 User Manual
Sylvania SRCD2730 User Manual
Sanyo RL 4920 User Manual
Samsung GT N7100GRY User Manual
Salton ME12CDW User Manual
Philips CDR 777 User Manual
Philips CDR 538 User Manual
Pantech DM P205 User Manual