Pantech NULL C3 User Manual
U S E R M A N U A L  
User Guide  
o i r a u s u  
l e d a í u G  
USER’S MANUAL  
C3  
Thank you for choosing the Pantech C3, our latest tri-band  
GSM mobile phone.  
The C3 has many features that will enhance your mobile  
experience. From its light weight and reliability, to the built-  
in camera with flash, we know you will enjoy all the features  
the C3 has to offer.  
The C3 user guide contains important information about  
using your handset. Please read the manual thoroughly,  
pay attention to the warranty on the back page and be alert  
to the exclusions and limitations of your warranty, related to  
the use of unauthorized components.  
Some information in this User Manual may differ from  
your phone, depending on your software version and network  
provider.  
NOTE  
1
Phone specifications  
•Flash LED (Light)  
Design  
•Photo album  
Clamshell phone with internal and external TFT displays.  
Dimensions & Weight  
•Weight: 71.8 g  
Displays  
•1.52” internal LCD  
•Dimensions: 69 mm x 43 mm x 20.4 mm  
•1.0” external LCD  
•True TFT color display  
Power Management (Performance)  
•Supports up to 262K colors within 128 x 128 pixels  
•6 lines for text in basic mode with 16-pixel font  
Battery Type  
Capacity  
Standby Time Talk Time  
Standard  
Lithium-Ion  
(Li-ion)  
Up to  
Up to  
•Two programmable (“Soft”) selection keys [[] and []];  
3 hours  
850 mAh  
250 hours  
four-way scroll/selection ([o]) key  
•List and grid menu  
Operating frequency  
Melodies  
•GSM 850, DCS 1800, and PCS 1900 networks in North  
America, South America, Europe, Africa, and Asia-Pacific  
where these networks are supported.  
Yamaha 64 poly sound.  
MP3 ringtones  
•Automatic band switching.  
Camera  
VGA CMOS built-in Camera.  
•Resolution up to 640 x 480 (307,200 pixels)  
•Self-timer function (5 seconds or 10 seconds)  
•Internal and external displays function as viewfinders  
2
Pantech C3 at a glance  
Earpiece  
External display  
Internal display  
Camera Flash (LCD  
mode)/Flashlight  
Camera  
Four-way menu navigation/  
special menu shortcut key  
(write new message, IM,  
address book, My Stuff)  
OK key (Menu confirm  
key)  
Right Soft key  
Left Soft key  
DiaI key  
Call accept  
Power on/off  
Headset jack  
Voicemail  
Alphanumeric keys  
Vibrate mode  
Volume up (camera)/  
down(flashlight/backlight)  
Cancel/back/text Clear/  
edit exit key  
Calendar  
Menu Scroll  
Microphone  
3
Quick & easy  
Keys  
Functions  
[ ]  
Perform the functions shown at the bottom line of the display by using these Soft keys.  
Left  
Right  
Scroll through the menu options in Menu mode.  
In Standby mode:  
Left key [l]: Access My Stuff menu  
n
Up key [u]: Access Write New message menu  
Right key [r]: Access Instant Messaging menu  
Down key [d]: Access Address Book list menu  
In Standby mode, press to launch the MEdia Net directly.  
Select a menu function or store user-input information, such as names. Also use this key for confirmation  
(as the [OK ] key).  
o
c
s
Deletes characters from the display, or returns to the previous menu.  
If pressed briefly in Standby mode, opens Calendar view.  
Makes or receives a call. If pressed in Standby mode, displays the Recent calls list.  
If pressed and held in Standby mode, redials the last number called.  
Ends the current call. If pressed and held in Menu mode, cancels user input and returns to Standby  
mode. If pressed and held, outside Menu mode, switches your phone on/off.  
e
If pressed and held in Standby mode, connects to the voicemail server automatically.  
1
4
Quick & easy  
Keys  
Functions  
0~9  
Enters numbers, letters or special characters. If pressed in Standby mode, displays the dialing screen.  
If pressed and held in Standby mode, enters or exits from Vibrate mode.  
If pressed and held in Text input mode, displays the Symbol input screen.  
If pressed in Predictive text input mode, switches to Word search mode.  
*
0
Enters an international dialing prefix(011, +).  
In Text input mode, enters the space character.  
Adjusts the earpiece volume in calls, and moves the cursor upwards or downwards in menus.  
If your phone is opened while in Standby mode, controls the key tone volume.  
In Standby mode, turn Camera preview mode on or off by pressing the side up-volume key. When the flip  
is closed, press the side down key to turn the backlight on, and press and hold to turn flashlight on or off.  
zx  
5
Contents  
Getting started  
Basic functions  
Package contents.................................................................14  
SIM card.................................................................................15  
About your SIM card...............................................................15  
Installing/Removing your SIM card.........................................15  
Changeable Cover................................................................15  
Removing cover......................................................................15  
Attaching cover.......................................................................15  
Battery ...................................................................................16  
Inserting your battery..............................................................16  
Removing your battery ...........................................................16  
Charging your battery.............................................................16  
Internal & external displays.................................................17  
Internal display .......................................................................17  
Internal display icons..............................................................17  
Automatic display off ..............................................................20  
Selecting functions and options.........................................21  
Selecting functions and options when your phone is open.....21  
Selecting functions and options when your phone is closed ..21  
Side key special functions ......................................................22  
Keypad lock ..........................................................................22  
To lock the keypad..................................................................22  
To unlock the keypad..............................................................22  
Switching your phone on or off ..........................................24  
To switch your phone on.........................................................24  
To switch your phone off.........................................................24  
Making and ending a call.....................................................24  
To make a call.........................................................................24  
To end a call ...........................................................................24  
To make a call using Call Logs...............................................24  
To make a call using Entry......................................................25  
To make an International call..................................................25  
Answering a call ...................................................................26  
To speed-dial from Entry.........................................................26  
To make an emergency call....................................................26  
To answer a call......................................................................26  
To reply to a missed call .........................................................26  
To reject a call.........................................................................27  
To answer a second call .........................................................27  
To switch between two calls ...................................................27  
To end the current call ............................................................27  
Options during a call............................................................27  
To adjust the call volume ........................................................27  
To switch your microphone off (Mute) or on (Speak)..............27  
•To switch your phone’s microphone off...............................27  
6
Contents  
•To switch your phone’s microphone back on ......................28  
To put a call on hold, and return to a held call........................28  
•To put a call on hold............................................................28  
•To return to a held call.........................................................28  
•To make a call while you are on a call ................................28  
•To switch between two calls................................................28  
•To end a call........................................................................28  
Transferring a call...................................................................28  
Multi-party calls.......................................................................29  
•To make a multi-party call ...................................................29  
•To add a new person to a multi-party call ...........................29  
•To add a caller to a multi-party call .....................................29  
•To view the status of multi-party call participants................29  
•To answer or make a second call during a multi-party call .29  
•To have a private conversation with one participant ...........29  
•To remove one participant from a multi-party-call...............30  
Searching for a number in Address Book during a call...........30  
•To search for a name or group in Address Book.................30  
•To find a name manually in Address Book..........................30  
•To view the highlighted entry in Address Book....................30  
Using DTMF tones..................................................................31  
Reading or writing a message during a call............................31  
Using your headset ..............................................................31  
Selecting menu functions....................................................32  
Moving within your phone’s menu and submenu functions....32  
Using the Shortcut Key in Standby Mode...............................32  
Entering text..........................................................................33  
Input mode..............................................................................33  
T9 mode .................................................................................33  
ABC mode ..............................................................................33  
123 mode................................................................................33  
Symbol mode..........................................................................33  
To change Text input mode.....................................................33  
To insert a space ....................................................................34  
Scrolling..................................................................................34  
Clearing letters and words......................................................34  
Returning to the previous screen............................................34  
Using T9 mode .......................................................................35  
Using ABC mode ....................................................................35  
Changing case........................................................................36  
Using 123 mode .....................................................................36  
Using Symbol mode ...............................................................36  
Applications  
Camera ..................................................................................38  
Take a Photo...........................................................................38  
7
Contents  
•Taking photos when your phone is open.............................38  
Using your camera options.....................................................39  
•The Preview mode..............................................................39  
Photo Album ...........................................................................40  
•Viewing the saved photos...................................................40  
•Using the photo options ......................................................40  
Settings...................................................................................41  
Messaging.............................................................................41  
Text Message .........................................................................41  
Multimedia Message...............................................................41  
Voice mail ...............................................................................42  
Receiving a new message......................................................42  
Managing memory..................................................................42  
Write New...............................................................................43  
•Text Message......................................................................43  
•Multimedia Message...........................................................44  
Inbox.......................................................................................47  
IM............................................................................................49  
•Starting Instant Messenger.................................................49  
•Viewing the Conversation Log ............................................49  
Sent ........................................................................................49  
Outbox....................................................................................49  
Draft........................................................................................50  
Browser Msg...........................................................................50  
Voicemail ................................................................................50  
Templates ...............................................................................51  
Settings...................................................................................51  
•Common Settings ...............................................................51  
•Text Message......................................................................51  
•Multimedia Message...........................................................52  
•Voice Mail............................................................................52  
•Browser Message ..............................................................52  
Memory Info............................................................................53  
Recent Calls..........................................................................54  
Missed Calls ...........................................................................54  
Received Calls........................................................................54  
Dialed Calls ............................................................................55  
Delete Call Logs .....................................................................55  
Call Time.................................................................................55  
GPRS Info ..............................................................................56  
MEdia Net ..............................................................................56  
MEdia Net Home ....................................................................56  
OTA Settings Service..............................................................56  
•WAP/OTA Provisioning .......................................................56  
Bookmarks..............................................................................57  
Go to URL...............................................................................57  
8
Contents  
Profiles....................................................................................57  
Cache .....................................................................................59  
•Cache Mode........................................................................59  
•Clear Cache........................................................................59  
Security Certifications.............................................................59  
Version....................................................................................59  
Cingular Mall.........................................................................60  
Shop Tones.............................................................................60  
Shop Games...........................................................................60  
Shop Graphics........................................................................60  
Shop Multimedia.....................................................................60  
Shop Applications...................................................................60  
MEdia Net Home ....................................................................60  
Mobile Email..........................................................................61  
Starting Mobile Email..............................................................61  
My Stuff .................................................................................61  
DRM/Forward Lock.................................................................61  
Games & Apps........................................................................61  
•Shop Games.......................................................................61  
•Games ................................................................................61  
Audio ......................................................................................62  
•Shop Tones.........................................................................62  
•Audio...................................................................................62  
Graphics .................................................................................63  
•Shop Graphics ....................................................................63  
•Graphics..............................................................................63  
Photo Album ...........................................................................63  
•Viewing the saved photos...................................................64  
•Using the Photo Options.....................................................64  
Tools .......................................................................................64  
•Alarm...................................................................................64  
Calendar.................................................................................65  
•Monthly View.......................................................................65  
•Daily View ...........................................................................66  
•Event View & Edit ...............................................................66  
Memo......................................................................................66  
Voice Memo............................................................................67  
World Time .............................................................................67  
Calculator ...............................................................................68  
Converter................................................................................68  
Stopwatch...............................................................................68  
SIM Tool Kit ............................................................................69  
Memory Status .......................................................................69  
Address Book .......................................................................69  
Name Search..........................................................................69  
Add Entry................................................................................70  
9
Contents  
Speed Dial..............................................................................70  
•To set Speed Dial................................................................70  
•To add to Speed Dial...........................................................70  
•To edit Speed Dial...............................................................71  
•To remove from Speed Dial ................................................71  
•To set Speed Dial in Name Search.....................................71  
Group......................................................................................71  
Memory in Use .......................................................................71  
Delete All ................................................................................72  
Copy All ..................................................................................72  
My Phone Number..................................................................72  
Memory Info............................................................................72  
Service Numbers....................................................................72  
Settings .................................................................................73  
Display....................................................................................73  
•Shop Graphics ....................................................................73  
•Main Screen........................................................................73  
•Greeting ..............................................................................73  
•Contrast ..............................................................................73  
•Backlight .............................................................................73  
Audio ......................................................................................74  
•Shop Tones.........................................................................74  
•Ringtone..............................................................................74  
Volume....................................................................................74  
•Alert Tones..........................................................................74  
•Key Tone.............................................................................75  
•Flip Open Tone....................................................................75  
•Sound Effects......................................................................75  
Call .........................................................................................75  
•Call Forward........................................................................76  
Answer Type...........................................................................77  
Auto Redial.............................................................................77  
Call Waiting ............................................................................77  
Caller ID..................................................................................78  
Phone .....................................................................................78  
•Language............................................................................78  
•Time & Date........................................................................78  
•Flight Mode .........................................................................78  
Security...................................................................................78  
•PIN1 Check.........................................................................79  
•Change PIN1 ......................................................................79  
•Phone Lock.........................................................................79  
•Change Password...............................................................79  
•Phone Barring.....................................................................79  
•Fixed Dialing (Fixed Dialing Numbers) ...............................80  
•Change PIN2 ......................................................................80  
10  
Contents  
•Network Barring ..................................................................80  
•Closed User Group (CUG)..................................................80  
Software Version ....................................................................80  
Reset ......................................................................................81  
TTY.........................................................................................81  
Appendix  
Menu tree...............................................................................84  
Access codes........................................................................86  
Troubleshooting checklist...................................................87  
Performance and safety.......................................................88  
Glossary ................................................................................89  
FCC & Industry Canada Regulatory Compliance ..............91  
Safety Precautions ...............................................................93  
11  
Getting started  
1. Package Contents  
2. SIM Card  
3. Changeable Cover  
4. Battery  
5. Internal & External Displays  
6. Selecting Functions and Options  
7. Keypad Lock  
1
Package contents  
Phone  
Battery  
Travel charger  
User’s Manual  
* The actual contents may vary depending on your region.  
14  
SIM card & Changeable Cover  
About your SIM card  
Removing Cover  
When you subscribe to your network operator, you receive  
a SIM (Subscriber Identity Module) card containing your  
registration information, PIN code, etc.  
Push down the flip cover in the direction of the arrows shown  
in the picture.  
An easier way to do this is to hold your phone upside  
Tip  
down, and use your thumbs to push the flip cover up, in the  
direction of the arrows as shown in the picture.  
Like a credit card, it should be kept secure and handled  
carefully.  
Do not bend, scratch or expose it to moisture.  
Avoid static electricity.  
To avoid corrupting your SIM card’s memory, always switch  
off your phone before removing or inserting your SIM card.  
Attaching Cover  
Installing/Removing your SIM card  
Insert the ridges on each side of the cover with the slots on  
the phone in the direction of the arrows shown in the picture.  
Snap in place.  
❶Remove the battery from your  
phone by pushing and lifting it as  
shown below.  
❷If the SIM slot is empty, insert the  
SIM card into the slot.  
❸To remove your SIM card, push the  
SIM card in the arrow direction as  
shown below.  
Since the Front Deco (A-Deco) is a changeable cover, if  
cover is detached be sure to replace the cover before using phone  
in order to protect it from outside elements.  
NOTE  
15  
Battery  
When your battery is fully charged,  
remove the adapter connection from the  
outlet, then disconnect the adapter from  
your phone by pressing the adapter’s  
side buttons and pulling the adapter  
away from your phone, as shown below.  
Inserting your battery  
Put the contacts of the battery into the  
hole located at the bottom of the unit,  
as shown in the following picture.  
Press the upper side of the battery until  
you hear the “click”.  
Removing your battery  
Push the battery-lock key up and  
remove the battery.  
Your phone is powered by a Lithium Ion (Li-Ion) battery.  
Tip  
This means that, unlike other forms of battery technology, you can  
recharge your battery while some charge remains without reducing  
your phone’s autonomy due to the “battery memory effect” inherent  
in those technologies.  
Charging your battery  
Your phone uses a Li-Ion battery. Make sure  
to use an authorized battery and charger  
only. For more details, please inquire at your  
nearest dealer.  
•Do not use a damaged battery or charger.  
•Use your battery for the specified purpose only.  
You can use your phone when the battery is  
being recharged.  
•The closer you are to your network’s base station, the  
longer your phone usage time because less battery  
power is consumed for the connection.  
When the battery is inserted in your phone,  
open the protective cover located on the  
bottom of your phone and connect the  
charger adapter, as shown below. A suitable  
adapter is supplied with your phone.  
•The battery recharging time varies depending on the  
remaining battery capacity and the battery and charger  
type you use.  
16  
Battery & Internal & External Displays  
•Battery life inevitably shortens over time.  
Internal & External Displays  
•Use an authorized battery and charger only.  
Internal display  
•Since overcharging may shorten battery life, remove the  
phone from its charger once it is fully charged. Unplug the  
charger, once charging is complete. Leaving the battery  
in hot or cold places, especially inside a car in summer  
or winter, may reduce the capacity and life of the battery.  
Always keep the battery within normal temperatures.  
Your phone has two displays (internal and external). Icons  
at the top of the internal display indicate your phone’s  
status.  
Internal display icons  
•Do not put your battery into contact with conductive  
objects.  
Depending on your phone’s status, the following icons may  
appear at the top of the internal display.  
•Dispose of and recycle used batteries in accordance with  
local regulations. Do not dispose of batteries by burning;  
they may explode.  
Icon area  
Text and graphic area  
•Do not use an unauthorized charger.  
Displays the following information in Standby  
mode:  
Textural and graphical information showing  
Network Name, Time and Date, or a Greeting  
put in by the user.  
•To prevent injury or burns, ensure that no metal objects  
come into contact with the + and – terminals of the  
battery.  
Soft keys  
Icon(s)  
Description  
Received signal strength.The greater the number of bars,the stronger the signal.  
17  
Internal External Displays  
Icon(s)  
Description  
A call is being made.  
Your phone is outside the network coverage area;you cannot make or receive calls.  
You have received one or more voice messages.  
WAP is connected.  
You have received one or more text,multimedia or e-mail messages.  
is displayed if the text message memory is full.  
A GPRS signal is available.  
is displayed when there is an active GPRS session.  
Call-forwarding feature is activated.  
Flight mode is activated.  
Alarm is set.  
18  
Internal External Displays  
Icon(s)  
Description  
You have set the alert type for incoming call to ring only.  
You have set the alert type for incoming call to ring ascent (volume increases over the duration of  
the ring).  
You have set the alert type for incoming call to ring and vibrate.  
You have set the alert type for incoming call to vibrate then ring.  
You have set the alert type for incoming call to silent.  
You have set the alert type for incoming call to vibrate only.  
Headset is connected.  
Battery level.The bar indicates the available battery charge.If your battery charge is low,  
displayed.  
is  
A message is being received.  
19  
Internal External Displays  
Icon(s)  
Description  
A message is being sent.  
Speakerphone mode is activated.  
You have received a new browser message. This icon is displayed until the message is loaded.  
Available, Away, Invisible Status of AIM  
Online, Away, Busy, Offline Status of MSN  
Available, Busy, Invisible Status of YAHOO  
Available, Away, Invisible Status of ICQ  
You have received one or more IM messages  
Automatic display off  
If you do not press any key for ten seconds (dependent on the user setting) while the internal and external displays are  
dimmed, the internal display turns off automatically to save power. To restore the display, press any key.  
20  
Selecting functions and options  
Your phone offers several convenient ways for you to select  
the phone function you want. You can access all of your  
phone’s functions when it is open.  
❹To move back to the previous function or option on a list,  
press the [c] key.  
❺To return to the Standby mode, press the [e] key.  
Selecting functions and options  
when your phone is open  
Your phone offers many phone operating and customization  
functions arranged in menus and sub-menus.  
Selecting functions and options  
when your phone is closed  
You can use some functions even though the phone is  
closed. Here are functions of the side keys when the phone  
flip is closed:  
Each menu and sub-menu allows you to view and change  
the settings of the particular function. You access these  
functions using the left and right selection (“Soft”) keys when  
your phone is open. Soft key functions change depending  
on the current context. The label or icon in the bottom line of  
the display, above the Soft keys, shows each key’s current  
function.  
- Press to adjust the earpiece volume up.  
- Press once to turn the ring off for an incoming call.  
- Press and hold to reject an incoming call.  
- Press and hold to turn the camera on/ off, while the flip is  
closed. Press once to take a picture.  
To display the functions and options available, or  
select the one required:  
•Adjusts the earpiece volume.  
•Turns the melody off if pressed when you  
receive an incoming call and the flip is closed.  
❶Press the left or right Soft key as appropriate.  
z
Side Up  
❷To select the function that is displayed or option that is  
highlighted, press the Soft key [[] or the [o] key.  
•Rejects the incoming call if pressed and held  
when you receive an incoming call and the  
flip is closed.  
In some functions, you may be asked to enter a password  
or PIN. Enter the required code then press the [o] key.  
NOTE  
•Turns the camera capture mode on/off, if  
pressed and held.  
❸To highlight the next option on a list, press the [u/d] key.  
21  
Selecting functions and options & Keypad Lock  
•Press to adjust the earpiece volume down.  
Keypad lock  
•Press once to turn off the ring for an incoming  
call.  
To lock the keypad  
x
Keypad lock prevents accidental pressing of the keys.  
•Press and hold to reject an incoming call.  
•Press once to turn the backlight on, while the  
flip is closed.  
Press the [Menu] Soft key then select [*] key within 3  
Side Down  
seconds.  
•Press and hold to turn on the flash light.  
•Press once to turn it off.  
To unlock the keypad  
Press the [Unlock] Soft key then select [*] key within 5  
Side key special functions  
seconds to unlock the keypad.  
Snap Shot: To initiate the camera function when the folder  
is closed, press and hold the side [z] key. Press the side [z]  
key again to take a photo. The image is saved in the album.  
This function makes it easy to take a self portrait.  
Flash Light: To turn ON the flash light, press and hold the  
Side DOWN [x] key. Press once to turn it OFF.  
22  
Basic functions  
1. Switching your phone on or off  
2. Making and ending a call  
3. Answering a call  
4. Options during a call  
5. Using your headset  
6. Selecting menu functions  
7. Entering text  
2
Switching your phone on or off & Making and ending a call  
To switch your phone on  
❶Open the phone.  
Making and ending a call  
To make a call  
❷Press and hold the power on/off key until your phone  
Enter the area code and phone number from Standby  
switches on.  
mode, then press the [s] key.  
To clear the last digit displayed, press the [c] key.  
❸If you are asked to input your PIN (Personal Identification  
Number), enter your SIM card’s PIN and press the [o]  
key. (For further details, see Security on page 80.)  
To clear the all digits displayed, press and hold the [c]  
key.  
Your phone starts to search for an available network and  
the current date and time is shown on the internal and  
external displays. Once connected to the network, you can  
make and receive calls.  
If you have turned the [Auto Redial] option on (For further  
details, see Auto Redial on page 79), your phone will attempt to  
make a call automatically for up to 10 times if it is not answered.  
NOTE  
If a malfunction occurs while you use your phone or it is  
not turned on, remove the battery then insert it again after 5 to 10  
seconds.  
NOTE  
To end a call  
Press the [e] key in the normal way. To terminate all active  
calls at the same time while you are in multi-party call,  
select [Options] and then select [End All Calls].  
To change the language if you are switching on your  
phone for the first time, select the Language menu option. (For  
further details, see Language on page 80.)  
NOTE  
Once the call is completed, a call summary (displaying  
the recipient’s name or number, and the call length) is  
displayed.  
To switch your phone off  
Press and hold the [e] key until the power-off animation is  
To make a call using Call Logs  
displayed.  
Your phone logs up to 30 dialed, received and missed call  
numbers. The last call number is saved in the first position.  
24  
Making and ending a call  
If you dial the same number more than once, only the latest  
occurrence is saved.  
To make an International call  
❶Press and hold the [0] key for the international prefix  
until the ‘+’ character appears on the display, or type the  
outgoing national code that follows 011 (if the network  
supports it).  
❶Press the [s] key to display the Call Logs list of dialed,  
received or missed call numbers in reverse chronological  
order.  
❷Press the [z/x] key or the [u/d] key to select a number.  
❷Type the country code, area code, and phone number  
that you want to call.  
❸Press the [s] key to dial the selected number.  
(For further details, see 3. Recent Calls on page 56.)  
❸Press the [s] key.  
To redial the last number in the Call Logs list, press and  
hold the [s] key.  
NOTE  
To make a call using Entry  
You can store frequently used names and phone numbers,  
called Entry, in your SIM card or your phone’s memory.  
Therefore; you do not have to remember all your phone  
numbers; simply select the name to recall the associated  
number.  
❶Press the [d] key to see the Name Search list.  
❷Select a number from Name Search.  
❸Press the [s] key to dial. (For further details, see 8.  
Address Book on page 71)  
25  
Answering a call  
To speed‐dial from Entry  
If your answer type is set to [Any Key], you can answer  
NOTE  
calls by pressing any key except the [e] key. While the flip is  
closed, you can press any side key to stop the ring, or press and  
hold any side key to reject the call.  
Press and hold the Speed Dial number to make a call using  
the number you have saved. For example, press and hold  
the [5] key to dial a number which you have saved as “5”  
in your Speed Dial list.  
To reply to a missed call  
(For further details, see Speed Dial on page 72.)  
If the incoming call could not be answered, a missed call  
message is shown on your phone’s display to remind you of  
the call you have missed.  
To make an emergency call  
You can make emergency calls even if your phone does not  
have a SIM card.  
This function is network and subscription dependent, and  
NOTE  
may not be available in all areas.  
❶Select Emergency Number, or press the [SOS] Soft key  
if your phone does not have a SIM card.  
To reply to a missed call, do the following.  
❷Press the [s] key.  
❶Keep your phone open.  
❷Press the [View] Soft key to display the list of missed  
calls.  
To answer a call  
When you receive a call, your phone rings (or vibrates).  
❸If necessary, scroll to highlight the number you want by  
If the caller can be identified, the caller’s phone number is  
displayed (or the caller’s name, if it is stored in your entry).  
pressing the [u/d] l key.  
❹Press the [s] key to call.  
This function is network and subscription dependent, and  
NOTE  
Press the [c] key or [e] key to close the ‘missed call’  
may not be available in all areas.  
notification message.  
❶To answer a call, open your phone.  
❷If your phone is already open, press the [s] key.  
26  
Answering a call & Options during a call  
Options during a call  
To reject a call  
•If your phone is open, press the [e] key or the [Reject]  
To adjust the call volume  
Soft key.  
To adjust the earpiece volume during a call, do one of the  
following.  
•If your phone is closed, press and hold the [z/x] key  
during the incoming call.  
•To increase the call volume during a call, press the [z]  
The caller hears a Voice mail.  
volume key on the left side of your phone.  
•To decrease the call volume during a call, press the [x]  
To answer a second call  
volume key on the left side of your phone.  
You can answer an incoming call while you have a call in  
progress, if your network service provider supports this  
service and you have activated the Call Waiting option. (For  
further details, see Call Waiting on page 79.)  
•In Standby mode with the folder open, adjust the ringtone  
volume by using the [z/x] keys.  
To switch your microphone off  
(Mute) or on (Speak)  
You will be notified of an incoming call by a ‘call waiting’  
tone.  
Press the [s] key. The first call is automatically put on hold.  
You can temporarily switch your phone’s microphone off so  
that the person you talk to on your phone cannot hear you.  
To switch between two calls  
Press the [Swap] Soft key.  
For example, you may wish to say something to another  
person in the room but do not want the person calling to  
hear you.  
To end the current call  
To switch your phone’s microphone off  
Press the [s] key. The call on hold is automatically  
Press the [Mute] Soft key, or press [Options] then select  
[Mute].  
reconnected to you.  
27  
Options during a call  
up in Address Book entry.  
To switch your phone’s microphone  
back on  
❷Press the [s] key to dial the second call. The first call is  
automatically put on hold.  
Press the [Unmute] Soft key, or press [Options] then select  
[Unmute].  
To switch between two calls  
Press the [Swap] Soft key. The current call is put on hold  
and the held call is reactivated so that you can continue  
your conversation with the caller.  
To put a call on hold, and return to  
a held call  
You can put a call on hold whenever you want.  
To end a call  
You can make another call while you have a call in progress  
if your network service provider supports this service. One  
call is active, while the other is on hold. You can also switch  
between the calls.  
Press the [s] key in the normal way. To terminate all active  
calls at the same time while you are in multi-party call,  
select [Options] and then select [End All Calls].  
To put a call on hold  
Transferring a call  
Press the [Options] Soft key then select [Hold], or press the  
[s] key. The callers name and icon are grayed while the  
call is on hold.  
You can transfer or connect the current call to the held call if  
your network service provider supports this service, so that  
callers can talk to each other. You will be disconnected from  
both of them.  
To return to a held call  
❶During a call, make or answer a call in the normal way  
then press the [Options] Soft key.  
Press the [Options] Soft key then select [Resume], or press  
the [s] key again.  
❷Press the [u/d] key to highlight the [Transfer] option  
To make a call while you are on a call  
then press the [Select] Soft key or [o] key.  
❶Enter the phone number that you want to dial or look it  
The two callers will be connected to each other.  
28  
Options during a call  
To view the status of multi‐party call  
participants  
Multi‐party calls  
A multi-party call feature is a network service that allows  
up to six people to take part in a multi-party or conference  
call simultaneously. For further details, contact your service  
provider.  
Press the [l/r] key. An icon indicates whether the remote  
party is participating in the multi-party call (‘Far Multiparty’)  
or on hold (‘Far Hold’.)  
To make a multi‐party call  
To answer or make a second call during  
a multi‐party call  
❶Call the first participant in the normal way.  
❶Place the multi-party call on hold by pressing the  
[Options] Soft key then selecting the [Hold All Calls]  
option.  
❷Call the second participant in the normal way. The first  
call is automatically put on hold.  
❸To join the first participant to a multi-party call, press the  
[Options] Soft key then select the [Join All] option.  
❷Answer or make a call in the normal way.  
❸To reactivate the multi-party call on hold, press the  
[Swap] Soft key.  
❹Press the [o] key  
To add a new person to a multi‐party  
call  
❹To end the multi-party call, press the [e] key or close  
the flip.  
❶Call the person in the normal way.  
To have a private conversation with one  
participant  
❷Press the [Options] Soft key then select the [Join All]  
option.  
❶Press the [Options] Soft key then select the [Private]  
option.  
❸Press the [o] key.  
To add a caller to a multi‐party call  
❷Press the [o] key.  
Press the [Options] Soft key then select the [Join All] option.  
❸Press the [u/d] key to highlight the participant you want  
then press the [o] key. Now you can talk privately with  
29  
Options during a call  
that person.  
Searching for a number in Address  
Book during a call  
❶Press the [Options] Soft key.  
❹The other participants can continue the conversation  
with each other.  
❺To return to the multi-party call, press the [Options] Soft  
key then select the [Join All] option.  
❷If necessary, press the [u/d] key to highlight the [Name  
Search] option.  
❻Press the [o] key.  
All of the multi-party call participants can now hear each  
other.  
❸Press the [o] key.  
❹The entries are displayed.  
To search for a name or group in  
Address Book  
To remove one participant from a multi‐  
party‐call  
Enter the first letters of the name for Name Search, or the  
first letters of the group for Group Search. The entries are  
displayed starting with the first entry matching your input.  
❶Press the [Options] Soft key then select the [Exclude]  
option.  
❷Press the [u/d] key to highlight the participant then  
press the [o] key. The call ends with that participant, but  
you can continue to talk with the other participants.  
To find a name manually in Address  
Book  
Press the [u/d] key.  
End the multi-party call by closing your phone or pressing  
the [e] key.  
To view the highlighted entry in  
Address Book  
Press the [o] key. (For further details, see 8. Address Book  
on page 71.)  
30  
Options during a call & Using your headset  
Using your headset  
Using DTMF tones  
You can turn the DTMF key tones off or on during a call.  
You can send or receive a call using your headset.  
When the [DTMF Off] option is selected, your phone does  
not transmit the key tones. It allows you to press keys  
without hearing any key tones during calls.  
When you connect your headset to the jack located at the  
top of your phone, the button on the headset works as  
follows:  
To communicate with answering machines or computerized  
telephone systems, you must select the [DTMF On] option.  
•While in Standby mode, press the button once to list  
recent calls.  
•While in Standby mode, press the button twice to redial  
the last call.  
Reading or writing a message  
during a call  
You can read or write a message during a phone call.  
❶Press the [Options] Soft key.  
•Press the button once to receive a call.  
•Press the button once to end the call.  
❷Press the [u/d] key to highlight the [Messaging] option  
then press the [o] key.  
•To read a received message, select the Inbox  
subcommand then scroll to the message that you want  
to read.  
•To write a new message, select the Write New  
subcommand then press the [o] key. (For further details,  
see Write New on page 45.)  
During a call, you can only send text messages.  
Multimedia messages cannot be sent, but can be saved.  
NOTE  
31  
Selecting menu functions  
Displaying your phone’s menu functions.  
Press the [c] key to return to the previous menu.  
NOTE  
Type the menu number to access the sub-menu quickly.  
To display your phone’s menu functions, press the [Menu]  
Soft key ([[]) in Standby mode.  
Using the Shortcut Key in Standby  
Mode  
Moving within your phone’s menu  
and submenu functions  
To move within your phone’s functions and select the  
function or value you want, press the following keys.  
Key  
Menu selected if  
If pressed and held  
Soft key [[] Displays menu  
Menu  
Key  
Function  
Soft key []] Activates Camera  
Goes to the main menu in Standby  
mode.  
[r] key  
Displays IM  
Soft key [[]  
[l], [r] key  
Navigation  
[l] key  
Moves within the main menu.  
Displays My Stuff  
Navigation  
Searches for the sub-menu.  
Moves within the main menu.  
[u] key  
Displays Write New  
screen  
[u], [d] key  
Navigation  
Goes to the sub-menu.  
Goes to the MEdia Net Home menu in  
Standby mode.  
[d] key  
Displays Address  
Book list  
Navigation  
[o] key  
[o] key  
Displays WAP browser WAP  
Moves the cursor upwards or down-  
wards in the menu.  
[z], [x] key  
Displays Calendar  
Monthly View  
[c] key  
You can input the menu function number to access the  
NOTE  
[s] key  
Displays Recent Calls Redials last call  
Displays Recent Calls Power On/Off  
submenu function quickly. For details of the menu tree listing all  
menu function and subfunction numbers, see 1. Menu Tree on  
page 86.  
[e] key  
32  
Selecting menu functions & Entering text  
correct word, thus requiring far fewer keystrokes than the  
conventional ABC mode (see below).  
Key  
Menu selected if  
If pressed and held  
Connect to the  
voice-mail server  
[1] key  
ABC mode  
Enter or exit from  
Vibrate mode  
[*] key  
In this mode, you input the letter you want by pressing the  
keypad once to select the first letter on the key, twice to  
select the second letter on the key, three times to select  
the third letter on the key and so on until the letter you want  
appears.  
Entering text  
Input mode  
123 mode  
On many occasions you need to input text in your phone  
such as: storing the name in your Address Book, writing a  
new message, creating a greeting, or scheduling events on  
your calendar.  
You can input numbers in this mode.  
Symbol mode  
You can input special characters like Greek letters, currency  
units, or a period mark in this mode.  
You can select from the following methods (modes) of  
inputting text in your phone.  
To change Text input mode  
T9 mode  
When you are in an area where you can input text, the  
text input mode indicator is displayed at the bottom of your  
screen.  
You can input a letter using only one keystroke per letter.  
The keypad has more than one letter on it – when you  
press the [5] key once, J, K or L may be displayed.  
The T9 mode automatically compares your keystrokes  
with an internal linguistic dictionary to determine the  
Example: Typing a Text Message.  
33  
Entering text  
By pressing the [z/x] key, the cursor can be moved very  
NOTE  
←The page number icon and the number of  
remaining characters that you can type.  
quickly to the beginning or the end of the text.  
Clearing letters and words  
←Editing area  
To clear the letter to the left of the cursor, press the [c]  
key.  
To clear all of the letters in the editor box, press and hold  
the [c] key.  
↑
↑
Editor options  
The current text input mode  
Returning to the previous screen  
❶Press the Soft key []] that indicates the current Text-  
When the text input field is empty, press the [c] key to  
input mode.  
return to the previous screen.  
❷Toggle to the mode you want to use by pressing the Soft  
key []] again as many times as necessary.  
Use the following procedures to change the text input  
Tip  
mode quickly in English mode (the Alphabet or Predictive mode):  
Key  
Function  
To insert a space  
Press and hold  
the [*] key  
Press the [0] key  
Displays the symbol screen. Returns to  
the previous screen in Symbol mode.  
To insert a space between words, press the [0] key. If you  
are in 123 mode or Symbol mode, press and hold the [0]  
key to add a space.  
Enters a space character.  
Deletes characters one by one. After  
deleting all the characters, returns to  
the previous screen.  
Press the [c] key  
Scrolling  
To move the cursor to the left or right within the text, press  
the scroll [l/r] key. To move the cursor up or down among  
the lines, press the scroll ([u/d]) key.  
Deletes all the characters and moves  
the cursor to the beginning of the input  
screen.  
Press and hold the  
[c] key  
34  
Entering text  
Example: To display the letter “C”,  
quickly press the [2] key three times.  
To display the letter “K”, press the [5]  
key twice. This method is called Multi-  
tap typing.  
Using T9 mode  
In the T9 alphabet Editor, most commonly used words  
appear as you input the text.  
❶Press the keys numbered [2] to  
[9] to input text. For example,  
press [4][3][5][5][6] in  
sequence to input ‘hello’. The word  
you are typing appears on the  
display. It may likely change with  
each key you press.  
The cursor moves to the right when you press a different  
NOTE  
key. When entering the same letter twice or a different letter on the  
same key,just press the [Right ] scroll key or wait a few  
seconds for the cursor to move to the right automatically, and then  
enter the next letter.  
❷Enter the whole word before editing  
or deleting any keystrokes.  
Refer to the table below for more information about the characters  
available. The characters vary depending on the text input  
language.  
❸Upon searching a word, input the next text.  
❹If the search fails, press [*] key to search which text  
can be typed in. Your phone displays the most commonly  
used choices first.  
[English]  
Key  
Characters, in displayed order  
❺Continue entering the next word.  
1
. , - ? ! ’ @ : 1  
Using ABC mode  
2
3
4
5
a
d
g
j
b
e
h
k
c
f
2
3
4
When typing in ABC mode, press the key labeled with the  
target letter once for the first letter; press it twice for the  
second letter, and so on.  
i
l
5
35  
Entering text  
Using 123 mode  
Key  
Characters, in displayed order  
Use the 123 mode to type numbers  
6
m
n
o
6
into the text. Press the key that  
corresponds to the digit that you want  
to type.  
7
8
9
0
p
q
r
s
7
t
u
v
8
w
x
y
z
9
Space 0  
Changing case  
To change the case of the next letter that you type, press  
the [#] key.  
There are three cases:  
Using Symbol mode  
The symbol mode allows you to enter  
symbols into your text.  
•Lowercase (no indicator)  
To display more symbols, press the  
scroll key ([u/d]).  
•Initial capital (  
)
To input a symbol, press the number  
for a symbol, and the symbol appears  
in the input screen.  
•Capital lock (  
)
36  
Applications  
1. Camera  
2. Messaging  
3. Recent Calls  
4. MEdia Net  
5. Cingular Mall  
6. Mobile Email  
7. My Stuff  
8. Address Book  
9. Settings  
See the appendix for information  
about the menu tree.  
3
Camera  
This function enables you to take a photo using the built-in  
camera. The photo can be saved and sent with a multimedia  
message.  
The default image size is 640X480 mode. You cannot set  
Frame in 640X480 size.  
NOTE  
❸Press the Scroll key ([u/d]) to zoom in/out of the image  
in the current preview when the image size is 128X128.  
Press the Scroll key ([l/r]) to control the seven levels  
of brightness.  
Take a Photo  
Taking photos when your phone is open  
❹The phone saves the image automatically when the user  
presses the [o] key. Press the [c] key to return to the  
camera preview screen.  
❶Press the [Menu] Soft key, 1. Camera, and then select  
1. Take a Photo to enter your phone’s photo capture  
mode.  
In Multi Capture mode, the photo can be named  
automatically only if one photo is set as Marked. Select [Mark] or  
[Unmark] to check the image that you want to save.  
NOTE  
You can also press the [Camera] Soft key ([]]) on the  
Tip  
idle screen to take a photo. At this time, the image size depends on  
the user setting.  
Image counter, which is located below image size,  
NOTE  
❷To change the photo shooting mode, press the Right Soft  
key ([]]). This toggles between the following options,  
represented by icons on your phone’s display.  
indicates the number of photos that you can take. Image counter  
might not be accurate depending on the types of objects and the  
level of brightness.  
If you are taking photos while your phone is open, you  
Tip  
can use the following keys to adjust your phone’s camera directly.  
Shooting Mode Icon  
Description  
Single Capture  
General mode for a single photo.  
Function  
Description  
Key  
Takes multiple photos. The quantity  
of photos is determined by the  
[Multi-shot] option.  
Multi Capture  
Brightness 7 levels (from 0 to 6)  
4 levels (from 0 to 3)  
Scroll key [l/r]  
Takes a photo with a built-in frame.  
The image size is fixed as 128X128.  
Frame Capture  
(only available in 128x128  
size).  
Scroll [u/d]  
Zoom  
38  
Camera  
•Normal  
Using your camera options  
The Preview mode  
•Sepia  
•Solarization  
•Monochrome  
•Line Drawing  
•Negative  
Press the [Options] Soft key ([[]) in Preview mode to  
select the following information which will be applied to the  
image. Its setting value is temporary, so if you want to save  
its value, press the [Menu] Soft key, select 1. Camera, and  
then select 3. Settings.  
•Embossing  
•Go to Album: Moves to the Photo Album.  
You cannot set Effect in 640X480 size.  
NOTE  
•Image Size: Displays the size of image that you want to  
shoot: 128X128 or 640X480.  
•Display Icons: Turns the display icons On or Off.  
The Single or Frame Capture mode  
This option does not appear in Frame Capture mode.  
NOTE  
❶Press the [Options] Soft key ([[]) in Capture mode to  
select the following information, which is applied to the  
image.  
•Self Timer: Specifies the delay time. You can choose  
None, 5 Secs, or 10 Secs. When the selected time has  
lapsed, the camera takes a photo.  
•Delete: Deletes the photo that is saved automatically.  
•Frame: Specifies the frame to use.  
•Set as:  
This option appears in Frame Capture mode.  
NOTE  
•Wallpaper : Adds a photo to Wallpaper in Display. The photo is  
set as the background image of the main screen.  
•Multi-Shot: Selects the multi-shot number that you want  
(4/6/9).  
•Address Book : Assigns a specific photo image to Address  
Book.  
This option appears in Multi Capture mode.  
NOTE  
•Back to Preview: Returns to the camera preview screen.  
•Flash: Turns the flash on or off.  
•Rename: Renames a photo.  
(For more information about renaming a photo, see  
•Effect: Applies one of the following effects to the picture:  
39  
Camera  
7. Entering text on page 35.)  
❶Press the [Menu] Soft key, select 1. Camera, and then  
select 2. Photo Album in the menu to access the Photo  
Album List.  
•Go to Album: Moves to the Photo Album.  
❷Press the [Send] Soft key ([]]) to transmit the photo  
❷Select photo from the list and press the [o] key to  
with the multimedia message.  
display the photo list in the album.  
Taking photos when your phone is closed  
❸Use the [Small] or [List] Soft key to change the list type  
(Small/List).  
❶Press and hold the side [z] key on the left side of your  
phone with the folder closed to enter or escape from  
Preview mode.  
❹Select a photo and press the [o] key to enlarge the  
photo view. Press the Scroll key ([l/r]) to view other  
photos in the album.  
❷Adjust the image by aiming the camera at the subject.  
Press the side [z] key to shoot the image in the current  
preview. The phone saves the image automatically and  
returns to Preview mode.  
Using the photo options  
Press the [Options] Soft key ([[]) to apply the following  
options to a selected photo from the album.  
Press and hold the side up key to enter into capture mode  
NOTE  
•Send as Multimedia Message: Sends the selected photo  
with a multimedia messages.  
when the flip is closed. At this time, the image size is 640X480 only,  
and the image appears on the external LCD.  
•Set as:  
•Wallpaper: Adds a photo to Wallpaper in Display. The photo is  
set as the background image of the main screen.  
Photo Album  
This function allows you to view or edit the photos saved on  
your phone.  
•Address Book: Assigns a specific photo image to Address Book  
Entry.  
Press [Menu] Soft key, select 1. Camera, and then select 2.  
Photo Album.  
•Rename: Renames a photo.  
(For further details about renaming a photo, see 7.  
Entering text on page 35.)  
Viewing the saved photos  
40  
Camera & Messaging  
Messaging  
•Delete: Deletes a photo.  
•Delete All: Deletes all photos in the album.  
•File Info: Views the information on a photo.  
This function allows you to create, send, read and save  
a message using the Short Message Service (SMS: text  
messages), Multimedia Message Service (MMS: messages  
supporting presentation of various media types, such as full  
color images and polyphonic ring tones) provided by your  
network operator, or an e-mail service.  
Settings  
Press the [Menu] Soft key, select 1. Camera, and then  
select 3. Settings.  
Change the default camera option value.  
Voice mails are also available. The multi-selection function  
is also supported.  
•Image Size: Size of the image to shoot: 128X128 or  
640X480.  
Press the [Menu] Soft key and then select 2.Messaging.  
•Shutter Sound: Shutter/Smile/321/Off  
These features are available only if your service  
provider’s network supports it. Contact your service provider for  
more information.  
NOTE  
•Flash: On/Off  
•Self Timer: Specifies the delay time. You can choose  
None, 5 Secs, or 10 Secs. When the selected time has  
lapsed, the camera takes a photo.  
Text Message  
Short message service (SMS) allows you to send and  
receive a short text message to and from other phones.  
•Multi-Shot: Selects the multi-shot number that you want  
(4/6/9).  
Multimedia Message  
Multimedia Message Service (MMS) is a messaging  
service similar to Short Message Service (SMS). It provides  
asynchronous delivery of personal multimedia messages.  
41  
Messaging  
In addition to the familiar text content of text messages,  
multimedia messages can contain images, graphics, and/or  
sound.  
Managing memory  
The Inbox, Outbox, Drafts, Sent, and Templates share a  
given amount of memory on the phone. In the Inbox, text  
messages (SMS) can be saved on the phone or the SIM,  
depending on the Text Message settings.  
An MMS message is a separate multimedia presentation in  
a single entry, not an attachment to the text file.  
Using the MMS feature, your phone can receive a  
multimedia message and/or send a picture message,  
depending on MMS availability from your service provider.  
When Save to in the Text Message settings is set to SIM,  
received messages are saved in the phone memory if  
the SIM capacity is full. Also, even if Save to in the Text  
Message settings is set to Phone, received messages are  
saved in the SIM if the memory capacity is full.  
Only phones that support the multimedia message feature  
can receive or display the multimedia messages.  
When using the Inbox, up to 50 received messages can be  
saved to the phone memory.  
Receiving a new message  
When you receive a new message, the popup dialog box  
displays the number of unread messages and the number  
of total messages with the New Message icon ( ) in the  
icon area of the internal and external displays.  
Up to 30 entries can be saved in the other mailboxes. The  
Inbox can use the SIM memory.  
Only the Inbox can use the SIM memory to store text  
messages (SMS).  
You also hear an alert, depending on the message sound  
setting.  
When you try to save more than 50 messages in the Inbox,  
a full icon (  
) appears.  
To read the new message(s) immediately, press the [Read]  
Soft key or the [o] key.  
When a full icon appears, you cannot receive any new  
messages. When you open the phone, the notification  
“Message full Please delete” appears on the display.  
To clear the new message notification on the display,  
press the [Cancel] Soft key, the [e] key, or the [c] key.  
NOTE  
You must delete one or more of the old messages in order  
to make memory available for the new messages.  
42  
Messaging  
Use the [Delete] option within the each mailbox, or use the  
[Delete All] option to delete all the messages.  
•Settings: Sets up the environment for messages.  
•Memory Info: Displays the free space of the SIM or  
phone memory.  
•Write New: Writes a multimedia message (MMS) or a text  
message (SMS)  
•Inbox: Displays the received messages in the SIM and  
Phone memory. You can save up to 50 messages in the  
phone memory and more messages are received only  
if the SIM capacity is available. So you can see over 50  
messages in the Inbox. The “10” in [10/20] represents  
the number of unread messages, whereas the “20”  
represents the number of saved messages in the Inbox.  
Write New  
Press [Menu] Soft key, select 2.Messaging, select 1.Write  
New, and then press the [o] key.  
Select the type of message you want to write.  
•Text Message: Write new SMS message.  
•Multimedia Message: Write new MMS message.  
•Sent: Displays the stored messages in the phone  
memory that were sent. This depends on the settings  
for Save Messages. Sent can display more than 30  
messages.  
Text Message  
❶Creating a Text Message. At the top of the display, the  
number of remaining characters appears and you can  
see the [ ] icon.  
•Outbox: Displays the list of stored messages that have  
not been sent. 30 messages can be saved to phone  
memory.  
❷While you are entering a text message, press the  
[Options] Soft key ([[]) for more editing options. Use  
[u/d] key to select an item and press the [o] key.  
•Draft: Displays the list of stored messages that were not  
completed and stored as Draft. You can save up to 30  
messages in Draft.  
•Add template: Obtain a template.  
•Edit Subject: Edits the message subject.  
•Save: Save messages in the phone memory.  
•Language: Select English, Spanish or French.  
•Templates: Displays the default template and your saved  
templates. You can save up to 30 messages in the phone  
memory (including the default template).  
43  
Messaging  
only be set while a message is being written. However,  
Delivery Reports and Read Reports setting can also be  
set by pressing 2.Messaging, select 8.Settings, and then  
select 3.Multimedia Message.  
❸After you have created the message, press the [o]  
key to send the message. If you want to send a Text  
Message to a new number that is not stored, press the  
[u] key to move to Add Entry, and then just enter the  
number (Add Entry is only for entering numbers that are  
not searched). If you want to search for a stored name,  
enter the name using the keypad. You can also add  
numbers from Call Log. To search for a number in the All  
Calls list, press the [Call Log] Soft key, select the correct  
number, and then press the [o] key to check it.  
•Slide Timing: Sets how long the received message is  
displayed for. The display automatically scrolls to the  
next slide page after the specified time.  
•Page Layout: Arranges the image and text display  
position in the slide page. You can set Image at Top or  
Text at Top.  
When you have finished entering the recipient information,  
press the [Send] Soft key.  
•Delivery Reports: When this option is set to [On], the  
network informs you whether or not your message  
has been delivered successfully (This is network  
dependent).  
Multimedia Message  
❶When [No Subject] page displays, press the [Options]  
Soft key ([[]) to use the following [Editor Options].  
•Edit Subject: Edits the message subject.  
•Read Reports: When this option is set to [On], the  
recipient’s phone sends a reply to let you know when  
your message has been read. (if your carrier’s network  
supports this functionality)  
•Add Objects: Adds the text, image, or sound.  
•Add Template: Adds a multimedia message template.  
This feature is only available when no item is in the slide.  
With more than one slide, Add Template is not available.  
•Priority: Set Normal, High, or Low.  
•Cc (Carbon copy): Sends the message to both the  
recipient and the third party.  
•Settings: The user can only change the setting for the  
message which is in the process of being written. The  
setting for Slide Timing, Page Layout and Priority can  
•Bcc (Blind carbon copy): Sends the message to the third  
party but does not notify the other recipient.  
44  
Messaging  
❷When [No Subject] page displays, press the [Add] Soft  
[Editor Options].  
key ([]]) to add an objects.  
•Add Text: Adds a new text.  
•Preview: Shows the message as it appears on the  
recipient’s phone, and you can return to the Editor to  
press the [Editor] soft key ([[]).  
•Add Image: Adds the photo or the downloaded image.  
Press the [o] key to select the sub-menu.  
•Take a Photo: Creates a new photo  
•Delete Text/Image/Sound: Deletes the selected text,  
image, or sound from the slide page.  
•Add Objects: Adds an image, sound, and slide objects.  
•Save as Draft: Saves messages in the phone memory.  
•Delete Slide: Deletes the selected slide.  
•Photo Album: Already saved photo  
•Downloaded: Downloaded image.  
(For further details, see Graphics on page 65.)  
•Add Sound: Adds the voice memo or the downloaded  
sound. Press the [o] key to select the sub-menu.  
•New Voice Memo: Creates a new recording memo  
•Voice Memo: Already recorded sound  
•Downloaded: Downloaded sound  
When more than one slide exists, this menu appears.  
NOTE  
•Edit Subject: Edits the subject.  
•Settings: The user can only change the setting for  
the message which is in the process of being written  
regardless of the global settings. To find those settings,  
press [Menu] Soft key select 2.Messaging, select  
8.Settings, and then select 3.Multimedia Message.  
(For further details, see Audio on page 63 and Voice  
Memo on page 69.)  
•Add Slide: Adds a new slide.  
•Slide Timing: Sets how long the received message is  
displayed. The display automatically scrolls to the next  
slide page after the specified time.  
After you add the text, the image or the sound, the Add  
NOTE  
Slide menu appears if you press the [Add] Soft key ([]]). To move  
to a different slide, press the [l/r] key.  
•Page Layout: Arranges the image and text display  
position in the slide page. You can set Image at Top or  
Text at Top.  
❸After writing the message, press the [o] key. And then  
press the [Options] Soft key ([[]) to use the following  
45  
Messaging  
•Downloaded: Downloaded image  
•Delivery Reports: When this option is set to [On], the  
network informs you whether or not your message  
has been delivered successfully (This is network  
dependent).  
•Replace Sound: Replaces the selected sound with a  
different selected sound from the sub-menu.  
•New Voice Memo: Creates a new recording memo  
•Voice Memo: Already recorded sound  
•Downloaded: Downloaded sound  
•Read Reports: When this option is set to [On], the  
recipient’s phone sends a reply to let you know when  
your message has been read. (If your carrier’s network  
supports this functionality.)  
❺When you have finished creating the message, press  
the [o] key to send the message. If you want to send  
a Multimedia Message to a new number or an e-mail  
address that is not stored, press the [u] key tomove  
to Add Entry, and then just enter the number or e-mail  
address (Add Entry is only for entering numbers or e-  
mail addresses that are not searched).  
•Priority: Set Normal, High, or Low.  
•Cc (Carbon copy): Sends the message to both the  
recipient and the third party.  
•Bcc (Blind carbon copy): Sends the message to the third  
party while not notifying to the other recipient.  
❹After writing the message, if the user wants to change  
the already added object, press the [u/d] key to move  
to the already added object and press the [Edit] or  
[Replace] Soft key ([]]). This key is automatically linked  
to editing text, or replacing image or sound.  
If you want to search for a stored name, enter the name  
using the keypad.  
You can also add numbers from Call Log. To find the Call  
Log menu, press the [Options] Soft key.  
•Call Log: Shows the recent calls  
•Edit: Edits text  
•Cc (Carbon copy): Sends the message to both the  
recipient and a third party in Address Book Entry.  
•Replace Image: Replaces the selected image/photo with  
a different selected image from the sub-menu.  
•Bcc (Blind carbon copy): Sends the message to a third  
party but does not notify the other recipients in Address  
Book Entry.  
•Take a Photo: Creates a new photo  
•Photo Album: Already saved photo  
46  
Messaging  
list of messages appears with the sender phone number or  
name and the message subject.  
After selecting the correct number, press the [o] key to  
check it.  
According to message type, the list of messages shows the  
following icons:  
When you have finished entering the recipient information,  
press the [Send] Soft key.  
Unread text message in the SIM  
Read text message in the SIM  
Unread text message in the phone  
Read text message in the phone  
Unread multimedia message  
Read multimedia message  
To send a text message or MMS message to someone not in  
your phonebook, enter the phone number at the idle screen and select  
the right soft key and then select type of message.  
NOTE  
If the size of the Multimedia Message exceeds the  
transmission limit (100 Kb), a warning information message will appear.  
It is automatically saved in the Sent folder if transmission is successful.  
NOTE  
Inbox  
❶Select the [Options] Soft key ([[]) on the bottom of the  
Press the [Menu] Soft key, select 2.Messaging, select  
2.Inbox, and press the [o] key to display the received  
messages one by one. To write a new message, press the  
[Reply] Soft key at the lower-right corner.  
message list to select one of the following options.  
•Callback: Calls to the message sender.  
•Delete: Deletes the selected message.  
•Delete All Read Messages: Deletes all read messages  
received.  
You can receive a multimedia message notification through  
the network and read only the downloaded multimedia  
message.  
•Delete All: Deletes all messages in the Inbox.  
You can also receive a text message and voice mail.  
•Forward: Sends the received message to another  
recipient.  
In case of a text messages, if available in the Address  
Book, the sender’s name and initial text appears with the  
list of messages. In the case of multimedia messages, the  
•Move to Phone (SIM): Saves the message in the phone  
memory (in the SIM) if the message is saved in the phone  
47  
Messaging  
(in the SIM). Only text message is available.  
2) Press the [o] key.  
•Reply All: Replies to the message sender and the 3rd  
party who received the message. (Shown only on the  
Multimedia Message.)  
•Save New: Creates a new entry.  
•Add to Old: Adds to the existing entry and saves the  
entry  
❷Select the Soft key ([]]) on the bottom of the message  
•Send Message: Sends a message to a selected  
recipient.  
list to select the following option.  
•Reply: Reply to the message sender.  
- When you select the e-mail in the list  
1) Press the [o] key.  
❸Select the [Options] Soft key ([[]) on the bottom of the  
message view to select one of the following options.  
•Save New: Creates a new entry.  
•Reply All: Replies to the message sender and the 3rd  
party who received the message. (Shown only on the  
Multimedia Message.)  
•Add to Old: Adds to the existing entry and save the  
entry.  
•Send Message: Sends a message to a selected  
recipient.  
•Delete: Deletes the selected message.  
•Forward: Sends the received message to another  
recipient.  
•Save URLs: Extracts a URL address from the  
message text. You can save it as a MEdia Net  
bookmark. If you press the [o] key, you can connect  
to the URL.  
•Callback: Calls the message sender.  
•Save Numbers & E-mail: Extracts a number & e-mail  
from the message text. You can save it as an Address  
Book entry.  
•Save Objects: Extracts an object from the multimedia  
message. You can save it in one of the categories in  
My Stuff. (Shown only on the multimedia message.)  
- When you select the numbers in the list.  
1) If you press the [s] key, you can call the person with  
2) Select the Soft key ([]]) on the bottom of the  
that number.  
message view to select the following function.  
48  
Messaging  
•Reply: Reply to the message sender.  
The icons below indicate the status of the MMS message  
saved in Sent:  
IM  
Sent MMS message (normal)  
Delivered MMS message  
Use Instant Messenger (IM) to send and receive short,  
simple messages that are delivered immediately.  
Expired or Rejected MMS message  
Read MMS message  
Starting Instant Messenger  
❶Press [Menu] Soft key, select 2. Messaging, and then  
select 3. IM.  
Deleted MMS message  
Delivered and Read MMS message  
Delivered and Deleted MMS message  
To manage messages in Sent:  
❷Highlight your established IM application and press the  
[Select] Soft key ([[]) or the [o] key.  
❸Type your Logon ID and your Password and then select  
❶Press the [Edit] Soft key at the bottom right corner to edit  
and send a Sent message using the recipient’s number.  
Sign On.  
❹Select the person you want to talk to.  
❷Select the [Options] Soft key on the bottom of the  
message list to select one of the following functions.  
❺Start your conversation.  
Viewing the Conversation Log  
•Delete: Deletes the selected message.  
You can view the log of your conversations in the Instant  
Messenger Saved History.  
•Delete All: Deletes all messages in Sent.  
•Forward: Sends the Sent message to another recipient.  
Sent  
Outbox  
Sent saves all messages sent from your phone.  
Outbox contains all messages you have not yet sent.  
Press [Menu] Soft key, select 2. Messaging, select 5.  
Press [Menu] Soft key, select 2. Messaging, and then select  
4. Sent.  
49  
Messaging  
Browser Msg  
Outbox, and press the [o] key.  
The phone can receive browser messages from the service  
provider.  
To manage messages in Outbox:  
❶Press the [Send] Soft key ([]]) at the bottom right  
Press [Menu] Soft key, select 2. Messaging, and then select  
7.Browser Msg, where the number of unread Browser  
messages is shown.  
corner to send the failed message again.  
❷Press the [Options] Soft key ([[]) at the bottom left  
corner to select the following functions.  
When you are in the list of Browser Messages, press  
the [Options] Soft key ([[]) to select from the following  
functions.  
•Delete: Deletes the message.  
•Delete All: Deletes all messages in the Outbox.  
•Edit: Edits and sends an unsent message using the  
recipient’s number.  
•Delete: Deletes a message.  
•Delete All: Deletes all the messages in Inbox.  
•Ok: Shows the information for the selected message.  
Draft  
In addition you can press the [Go to] Soft key ([]]) to  
Draft contains all the messages you have edited and saved.  
connect to the appropriate WAP page.  
Press [Menu] Soft key, select 2. Messaging, select 6. Draft,  
and press the [o] key.  
To manage messages in Draft:  
Voicemail  
If you are busy or cannot answer when someone calls,  
you can refer the caller to a voice-mail message service.  
After the caller leaves a message, the voice mail service  
indicates that a message is available.  
Press the [Options] Soft key ([[]) at the bottom left corner  
to select the following functions.  
•Delete: Deletes the message.  
Press the [Menu] Soft key, select 2. Messaging, select 8.  
Voicemail, and press the [o] key. You can listen to the  
voicemail by calling the voicemail center.  
•Delete All: Deletes all messages in Draft.  
50  
Messaging  
Templates  
Settings  
A template contains a block of text for quick insertion into  
text messages and multimedia messages.  
Before you can send or receive messages using your  
phone, you must configure their settings first. This  
information is normally pre-populated in the phone by your  
service provider.  
Press the [Menu] Soft key, select 2. Messaging, and then  
select 9. Templates.  
Press the [Menu] Soft key, select 2. Messaging, and then  
select 10. Settings.  
If no user-created template exists, only the Create New  
menu appears in the list.  
Common Settings  
❶Select a text or a multimedia template menu and press  
the [Options] Soft key ([[]) at the left for associated  
options.  
Select [Menu], select 2. Messaging, select 10. Settings,  
select 1.Common Settings, and press the [o] key.  
To set up common message settings, use the  
following functions:  
•Create New: Makes a new template. Not available if the  
template space is full.  
•Text Message: Writes a new text template.  
•Default Edit Mode: Sets in Alphabet mode (Multi-tap  
mode) or Predictive mode (T9 mode).  
•Multimedia Message: Writes a new multimedia template.  
•Save messages: If set as On, the messages sent will be  
stored in the [Sent].  
•Delete: Deletes a template you have defined. The default  
template does not appear.  
•Delete all: Deletes all messages in the templates box.  
The default template does not appear.  
Text Message  
Press the [Menu] Soft key, select 2. Messaging, select 10.  
Settings, select 2.Text Message, and press the [o] key.  
To set up default Text Message information, use the  
following functions:  
•Edit: Edits the selected template.  
❷Select a message and press the [Send] Soft key ([]]) to  
send the selected template.  
•Message Center: Stores or changes the number of  
51  
Messaging  
your message center that is required when sending a  
message.  
your message has been read.  
•Message Lifetime: Sets the duration of time your  
message is stored at the message center while  
attempting to deliver it. You can select one of 1 Hour,  
2 Hours, 6 Hours, 1 Day, 2 Days, 1 Week, 4 Weeks, 6  
Months, or Maximum.  
•E-mail Gateway: Stores or changes the number of your  
e-mail gateway required when sending an e-mail.  
•Save to: Sets the text message storage to SIM or phone.  
•Message Format: Sets the message type to Normal, Fax,  
Voicemail, ERMES, National Paging, X.400, or Internet.  
The network converts the messages into the selected  
format.  
Voice Mail  
Press the [Menu] Soft key, select 2. Messaging, select 10.  
Settings, select 4.Voice Mail, and press the [o] key.  
This number is normally pre-populated by your carrier  
during the activation process.  
The message format depends on the SIM.  
NOTE  
Multimedia Message  
Browser Message  
Press the [Menu] Soft key, select 2. Messaging, select 10.  
Settings, select 3 .Multimedia Message, and press the [o]  
key.  
Press the [Menu] Soft key, select 2. Messaging, select 10.  
Settings, select 5.Browser Message, and press the [o] key.  
•Receive: Set up browser message receiving. The (  
icon displays when the user receives a new message.  
To set up default Multimedia Message information,  
use the following functions:  
)
•Profiles: Sets up multimedia messages profile settings.  
When the user receives an SI (Service Indication)  
message  
•Delivery Reports: When this option is set to [On], the  
network informs you whether or not your message has  
been delivered successfully.  
•Auto  
1. Press the [Options] Soft key ([[]) on the Browser  
•Read Reports: When this option is set to [On], the  
Message Alerting screen.  
recipient’s phone sends a reply to let you know when  
·Load: Enters the browser.  
52  
Messaging  
·Postpone: The message is placed in the WAP PUSH inbox.  
Only an alert occurs.  
·Ignore: Deletes the received message.  
•Acknowledge  
2. Press the [Options] Soft key ([]]) on the Browser  
1. Press the [Options] Soft key ([[]) on the Browser  
Message Alerting screen.  
Message Alerting screen.  
·Exit: Saves and exits the Browser Message service.  
·Accept: Shows the information for the selected message.  
•Acknowledge  
2. Press the [Options] Soft key ([]]) on the Browser  
Message Alerting screen.  
1. Press the [Options] Soft key ([[]) on the Browser  
Message Alerting screen.  
·Reject: Deletes the received message.  
·Accept: Shows the information for the selected message.  
•Off  
Does not accept messages.  
•Silent  
When the user receives a message, it attempts an  
automatic connection with the corresponding URL. Only  
an alert occurs.  
2. Press the [Options] Soft key ([]]) on the Browser  
Message Alerting screen.  
·Reject: Deletes the received message.  
•Off  
Does not accept messages.  
•Silent  
Memory Info  
This function displays the amount of used and available  
memory on your phone.  
When the user receives a message, it attempts an  
automatic connection with the corresponding URL. Only  
an alert occurs.  
When the user receives an SL (Service Load)  
message  
Press the [Menu] Soft key, select 2. Messaging, and then  
select 11. Memory Info to display the free text message and  
multimedia message memory space.  
•Auto  
When the user receives a message, it attempts an  
automatic connection with the corresponding URL.  
53  
Recent Calls  
This function displays missed calls, received calls,  
and dialed calls. You can delete a call log and see the  
information for the Call Time and GPRS info in this menu.  
the SIM or the phone, this option appears. Saves the  
selected number to the SIM or the phone.  
•Delete: Deletes the selected number.  
Press the [s] key to see the recent calls in Standby mode  
or select the [Menu] Soft key and then select 3.Recent  
Calls.  
•Delete All: Deletes all missed call records from the list.  
Press the [Message] Soft key ([]]) to send a message to  
the person whose call you missed.  
If Address Book Entry contains the phone number that  
NOTE  
you want to dial, the name displays. Alternatively, the phone  
number, date, and time displays on the screen.  
Received Calls  
This function displays the received call list showing the time  
and date of a received call as well as the number or name  
of the caller.  
Press the [s] key when the cursor is placed on the number  
or name to dial the number.  
Press the [Menu] Soft key, select 3.Recent Calls, and then  
select 2.Received Calls.  
Missed Calls  
This function displays the missed calls list showing the time  
and date of missed calls as well as the number or name of  
the caller.  
Press the [u/d] key to select the received call.  
To manage your received calls, press the [Options] Soft key  
([[]) to select from the following functions.  
•Call: Call the selected number.  
Press the [Menu] Soft key, select 3.Recent Calls, and then  
select 1.Missed Calls.  
Press the [u/d] key to select the missed call.  
To manage your missed calls, press the [Options] Soft key  
([[]) to select from the following functions.  
•Call: Call the selected number.  
•Save Number: If the selected number is not saved on the  
SIM or the phone, this option appears. Save the selected  
number to the SIM or the phone.  
•Delete: Deletes the selected number.  
•Delete All: Deletes all received call records from the list.  
•Save Number: If the selected number is not saved on  
54  
Recent Calls  
Delete Call Logs  
This function allows you to choose to delete all missed,  
received, or dialed call records or delete all call records.  
Press the [Message] Soft key ([]]) to send a message to  
the person who called you.  
Dialed Calls  
Press the [Menu] Soft key, select 3.Recent Calls, and then  
select 4.Delete Call Logs.  
This function displays the dialed calls list showing the time  
and date of dialed calls as well as the number or name of  
the recipient.  
Select All Calls to delete all the call records. Press [Yes]  
or [No] to confirm that you want to execute or cancel this  
function.  
Press the [Menu] Soft key, select 3. Recent Calls, and then  
select 3. Dialed Calls.  
If no logs exist, the message “List Empty” appears.  
NOTE  
Press the [u/d] key to select a dialed call.  
To manage your dialed calls, press the [Options] Soft key  
([[]) to select from the following functions.  
•Call: Call the selected number.  
Call Time  
This function displays information on call times.  
•Press the [Menu] Soft key, select 3.Recent Calls, and  
then select 5.Call Time. The following information is  
displayed.  
•Save Number: If the selected number is not saved on the  
SIM or the phone, this option appears. Save the selected  
number to the SIM or the phone.  
•Last Call: Displays date and time.  
•Delete: Deletes selected number.  
•Received, Dialed and Total Calls: Displays the total call  
time.  
•Delete All: Deletes all the dialed call records from the list.  
Press the [Message] Soft key ([]]) to send a message to  
•Reset Call Times: Resets the call timer. To confirm the  
resetting of all call times, input your phone’s password  
then press the [o] key.  
the person if you missed the call.  
55  
Recent Calls & MEdia Net  
GPRS Info  
This function displays the following information on the  
volume of GPRS data transmitted.  
MEdia Net  
MEdia Net Home  
You can access the Internet with MEdia Net.  
Press the [Menu] Soft key, select 3.Recent Calls, and then  
select 6.GPRS Info.  
This means you can connect to the Internet anywhere and  
anytime you have network coverage.  
•Current Info.: Displays the total volume of GPRS data  
transmitted in the current session, in Kbytes.  
This function contacts your network to load your Wireless  
Web service provider’s homepage. You can also press the  
[o] key in Idle mode. Press the [Menu] Soft key, select  
4.MEdia Net, and then select 1.MEdia Net Home.  
•Last Info.: Displays the total volume of GPRS data  
transmitted in previous sessions, in Kbytes.  
•Total Info.: Displays the total volume of GPRS data  
transmitted and received, in Kbytes.  
The context of the MEdia Net startup homepage depends  
on your Wireless Web service provider. To scroll through the  
screen, use the [u] and [d] keys.  
•Clear Logs: Clears the logs recording how much GPRS  
data you have transmitted.  
OTA Settings Service  
WAP/OTA Provisioning  
In order to use the MEdia Net, you need to have the correct  
connection settings on your phone. You can add or edit the  
WAP Profile manually, or receive its settings information  
as a type of configuration message from an operator or a  
service provider. If you receive the settings information from  
an operator or service provider, it will automatically store  
the WAP setting information on the phone. Note that you  
56  
MEdia Net  
need to follow some on-screen steps to save and activate  
the settings.  
Go to URL  
This function allows you to directly input the address of a  
URL and connect to it.  
Bookmarks  
❶Press the [Menu] Soft key, select 4.MEdia Net, and then  
select 3.Go To URL.  
This function allows you to bookmark an Internet address  
using the MEdia Net just as you do with a PC Internet  
browser.  
❷Input the URL you want to go to, then press the [o] key.  
❶Press the [Menu] Soft key, select 4.MEdia Net, and then  
select 2.Bookmarks  
Profiles  
This function selects or edits WAP connection profiles on  
your phone.  
❷To register a URL and name in the closest empty number  
of the Bookmarks List, go to the 6.Empty menu and then  
press the [Add] Soft key on the right.  
The settings for your WAP service are already entered  
NOTE  
as required by your service provider. Care should be taken when  
you make any modification to a profile since it may cause WAP to  
be inoperative.  
To manage existing bookmarks, select the bookmark  
then press the [Options] Soft key ([[]) to select from the  
following functions.  
Your phone is compatible with OTA (Over The Air) messages.  
These are used by service providers to send connection details  
directly to your phone. Please ask your service provider for details  
of this service.  
•Edit: Edits the URL and name of a bookmark.  
•Delete: Deletes a bookmark from the list.  
•Send Message: Sends a currently selected bookmark  
via SMS.  
❶Press the [Menu] Soft key, select 4.MEdia Net, and then  
select 4.Profiles.  
❷To select a profile, highlight it in the Profile List then  
press the [o] key. You cannot select Unedited Profile.  
To edit a profile, select it in the Profile List then press the  
[Edit] Soft key to select from the following functions.  
You cannot use the [Edit] and [Delete] options for default  
bookmarks.  
NOTE  
❸Press the [Go] Soft key []] to go to the related site.  
57  
MEdia Net  
•GPRS Settings: This menu allows you to set the GPRS  
network proxy by inputting the following information.  
•Profile Name: Press the [o] key to change the profile  
name.  
•Gateway/Proxy: If you set the Connection Type to  
WAP, Gateway is displayed. If you set it to HTTP,  
Proxy is displayed. Press the [o] key to display the  
subfunctions such as IP Address and IP Port, then input  
the appropriate information for each of the following  
subfunctions, inputting the information provided by your  
service provider.  
•Home URL: Press the [o] key to edit the Homepage  
URL provided by your service provider.  
•Connection Type: Select either WAP or HTTP.  
•GSM Settings: This function allows you to set the GSM  
network proxy by inputting the following information.  
•Gateway/Proxy: If you set the Connection Type to  
WAP, Gateway is displayed. If you set it to HTTP,  
Proxy is displayed. Press the [o] key to display the  
subfunctions such as IP Address and IP Port, then input  
the appropriate information for each of the following  
subfunctions, inputting the information provided by your  
service provider.  
•Access Point: Press the [o]key to input the appropriate  
Access Point.  
•Login ID: Press the [o] key to input the appropriate  
login ID.  
•Password: Press the [o] key to input the appropriate  
password.  
•Data Call Type: Press the Left or Right scroll key to  
select ISDN or Analog.  
•DNS Settings: Input the appropriate IP address for the  
Domain Name Server. You can input the primary and  
secondary DNS.  
•Dial Number: Press the [o] key to input the appropriate  
dialup number.  
This function is available only when your Connection Type  
is set to HTTP.  
NOTE  
•Login ID: Press the [o] key to input the appropriate  
login ID.  
•Bearer: Select the bearer type for each type of network  
access. Press the Left or Right scroll key to select GSM  
Only or GPRS Only.  
•Password: Press the [o] key to input the appropriate  
password.  
58  
MEdia Net  
Press the [Menu] Soft key, select 4.MEdia Net, select  
5.Cache, and then select 2.Clear Cache.  
•Reset Profile: Press the [o] key to reset the settings of  
the selected profile. Press the Left or Right scroll key to  
select Yes or No.  
Security Certifications  
Cache  
Press the [Menu] Soft key, select 4.MEdia Net, and then  
select 6.Security Certifications.  
This function sets up your phone’s cache. This feature is  
used to store WAP pages directly on your phone, so they  
display rapidly when you return to them.  
Press the [o] key to see the saved security certificate.  
Version  
Cache Mode  
This function displays the software version of your phone’s  
WAP browser.  
This function sets up the cache memory check, which  
verifies whether the WAP page’s information is already  
stored in your phone’s cache memory.  
Press the [Menu] Soft key, select 4.MEdia Net, then select  
7.Version.  
❶Press the [Menu] Soft key, select 4.MEdia Net, select  
5.Cache, and then select 1.Cache Mode.  
❷Select one of the following options.  
•Always Check: The cache is always checked whenever a  
URL is loaded.  
•Never Check: The cache is never checked.  
Clear Cache  
This function clears all data stored in the cache (recently  
visited WAP pages).  
59  
Cingular Mall  
Shop Tones  
Shop Applications  
Selecting this menu launches the Web browser to  
Cingular’s Tones menu.  
Selecting this menu launches the Web browser to  
Cingular‘s Applications menu.  
Press the [Menu] Soft key, select 5.Cingular Mall, and then  
select 1.Shop Tones.  
Press the [Menu] Soft key, select 5.Cingular Mall, and then  
select 5.Shop Applications.  
Shop Games  
MEdia Net Home  
Selecting this menu launches the Web browser to  
Cingular’s game menu.  
For further details about 4. MEdia Net, see page 58.  
Press the [Menu] Soft key, select 5.Cingular Mall, and then  
select 2.Shop Games.  
Shop Graphics  
Selecting this menu launches the Web browser to  
Cingular’s Graphics.  
Press the [Menu] Soft key, select 5.Cingular Mall, and then  
select 3.Shop Graphics.  
Shop Multimedia  
Selecting this menu launches the Web browser to  
Cingular’s Multimedia menu.  
Press the [Menu] Soft key, select 5.Cingular Mall, and then  
select 4.Shop Multimedia.  
60  
Mobile Email & My Stuff  
•Yahoo Search (only Yahoo): Browse the Yahoo search  
homepage.  
This function enables you to send an e-mail to someone  
and read your email.  
•Preferences: Sets the display and confirmation setting.  
Starting Mobile Email  
❶Press the [Menu] Soft key and select 6. Mobile Email.  
My Sutff  
❷Highlight your established e-mail account and press the  
[Select] Soft key ([]] or the [o] key.  
❸Type your Logon ID and your Password and then select  
DRM/Forward Lock  
Your phone supports a Digital Rights Management (DRM)  
system to protect acquired content. A piece of content (for  
example, ringtones, wallpapers) can be protected by using  
Forward Lock, which means the protected contents cannot  
be forwarded to other devices including other phones and  
desktops. With respect to DRM, a forward locked sound  
appears with an icon ( ) in the sound list.  
Sign On.  
•Read: Reads the selected e-mail.  
•Delete: Deletes the selected e-mail.  
•Mark for Deletion: Selects an e-mail you want to delete.  
If you select one or more e-mails, the [Delete Marked]  
option is displayed.  
•Delete Marked: Deletes the marked e-mails.  
Games & Apps  
Shop Games  
•Unmark: Unmarks the selected e-mail for deletion (Multi  
Delete).  
Selecting this menu launches the Web browser to  
Cingular’s Arcade menu.  
•Compose New (Write in AOL): Writes the new e-mail.  
•Go to Folder: Lists your e-mail folder.  
Games  
•Email Alerts: Sets the new e-mail alerts functionality.  
Press the [Menu] Soft key, select 7.My Stuff, and then select  
1.Games & Apps in the menu to view the Java Game.  
•Check for Mail (Retrieve Mail in AIM & AOL): Retrieves  
the e-mail from the mail server.  
61  
My Stuff  
The list is stored in your phone. After moving to the game  
that you select, using the scroll key, press the [o] key or  
the [Run] Soft key to run the game and press the [Options]  
Soft key to view the following:  
MP3 and AMR. Press the [Menu] Soft key, select 7.My  
Stuff, and then select 2.Audio to display the list of sounds  
recorded in your phone.  
The selected melody automatically plays once.  
•Info: Shows the information about the selected game.  
Unless you have set your ring type to vibration or silent  
NOTE  
•Delete: Deletes the selected game. (You cannot delete  
the default game.)  
mode.  
•Update: Updates the selected game version. (You cannot  
update the default game.)  
Press the [Options] Soft key ([[]) to apply the options to  
the sound concerned.  
•Permissions: Sets the permission regarding each  
function when the selected game accomplishes a specific  
function.  
The [Options] Soft key is active when the downloaded  
sound is selected.  
•Send as Multimedia Message: Sends the selected sound  
in a multimedia messages. This option is available only  
for non-forward-locked sounds.  
•VM Version: Shows the JAVA version that the built-in  
Java VM (Virtual Machine) supports.  
•Set as Ringtone: Sets the selected sound as a preferred  
ringtone. Press the [o] key to set default ringtone.  
•Rename: Renames a sound.  
Audio  
Shop Tones  
(For further details about renaming a file, see 7. Entering  
text on page 35.)  
Selecting this menu launches the Web browser to  
Cingular’s Tones menu.  
•Delete: Deletes a sound.  
Audio  
•Delete All: Deletes all sounds in the sound list.  
•File Info: Views the information about a sound.  
Play back sound in your phone or edits information. The  
sound formats supported here are MIDI, SMAF, iMelody,  
62  
My Stuff  
to the image. The [Options] Soft key is active when the  
downloaded image is selected.  
MP3 ringtone support (maximum file size: 500 Kb) and  
MP3 files might be subject to the relevant copyright laws, so refrain  
from distributing these files illegally.  
NOTE  
•Send as Multimedia Message: Sends the selected image  
to a multimedia messages. This option is available only  
for non-forward-locked graphics.  
Graphics  
•Set as Wallpaper: Adds an image to ‘Wallpaper’ in the  
‘Display settings’. The image is set as the background  
image of the main screen.  
(For further details about renaming a file, see 7.Entering  
Text on page 35.)  
Shop Graphics  
Selecting this menu launches the Web browser to  
Cingular’s Graphics menu.  
Graphics  
•Rename: Renames an image.  
(For further details about renaming a file, see 7. Entering  
text on page 35.)  
You can view or edit the image or information recorded in  
your phone in this menu.  
The image formats supported here are JPEG, GIF, BMP,  
WBMP and PNG.  
•Delete: Deletes an image  
•Delete All: Deletes all images in the image list.  
❶Press the [Menu] Soft key, select 7.My Stuff, and then  
select 3.Graphics to see the list of images that are saved  
in your phone.  
•File Info: View the information about an image. With  
respect to DRM, a forward locked image appears with an  
icon ( ) in the image list.  
❷Press the [View] Soft key or press the [o] key to set the  
selected image as Wallpaper.  
Photo Album  
This function allows you to view or edit the photos saved on  
your phone.  
❸Press the [l/r] key to view other images in the list.  
❹Press the [List] Soft key to return to the list.  
❺Press the [Options] Soft key ([[]) to apply the options  
Press [Menu] Soft key, select 7.My Stuff, and then select  
63  
My Stuff  
4.Photo Album.  
(For further details about renaming a photo, see 7.  
Entering text on page 35.)  
Viewing the saved photos  
•Delete: Deletes a photo.  
❶Press the [Menu] Soft key, select 1. Camera, and then  
select 2. Photo Album in the menu to access the photos.  
•Delete All: Deletes all photos in the album.  
•File Info: Views the information on a photo.  
❷Select a photo from the list and press the [o] key to  
display the photo list in the album.  
Tools  
❸Use the [Small] or [List] Soft key to change the list type  
(Small/List).  
Tools provides various functions such as Alarm, Calendar,  
Memo, Voice Memo, World Time, Calculator, Converter,  
Stopwatch, and SIM Tool Kit.  
❹Select a photo and press the [o] key to enlarge the  
photo view. Press the Scroll key ([l/r]) to view other  
photos in the album.  
Press the [Menu] Soft keys, select 7.My Stuff, and then  
select 5.Tools.  
Using the Photo Options  
Alarm  
Press the [Options] Soft key ([[]) to apply the following  
This function allows you to set an alarm to sound at up to  
five different times.  
options to a selected photo from the album.  
•Send as Multimedia Message: Sends the selected photo  
with the multimedia message.  
Press [Menu] Soft key, select 7.My Stuff, select 5.Tools, and  
then select 1.Alarm to display the current alarm list.  
•Set as:  
When you set the Wake-Up Call to On, an icon is shown  
on your phone’s display.  
NOTE  
•Wallpaper: Adds a photo to Wallpaper in Display. The photo is  
set as the background image of the main screen.  
•Address Book: Assigns a specific photo image to Address  
Book Entry.  
To set an alarm  
Press [Menu] Soft key, select 7.My Stuff, select 5.Tools, and  
then select 1.Alarm to display the current alarm list.  
•Rename: Renames a photo.  
64  
My Stuff  
Calendar is displayed as the following views: Monthly View,  
Daily View, and Event View & Edit.  
Press the [New] Soft key ([]]), and compose a new alarm  
in the alarm edit screen.  
Press the [Menu] Soft key, select 7.My Stuff, select 5.Tools,  
and then select 2.Calendar.  
To manage existing alarms  
Select the alarm then press the [Option] Soft key ([[]) to  
Monthly View  
select from the following functions.  
Calendar is displayed in this view by default.  
•Delete: Deletes an alarm from the list.  
Press the [Menu] Soft key, select 7.My Stuff, select 5.Tools,  
and then select 2.Calendar from the menu to display the  
Monthly View.  
•Delete All: Deletes all alarms from the list.  
•Wake-Up Call On/Off: If you set Wake-Up Call to On, the  
alarm rings regardless of any other settings (for example,  
vibrate settings).  
Press the following keys to move in Monthly View.  
•Snooze On/Off: If the alarm is set to Snooze, it rings in 5  
minute intervals for the next 15 minutes. Only one alarm  
can be set to Snooze On.  
To:  
Press:  
[l] key Previous Day  
Move to another day  
[r] key Next Day  
Press the [o] key to edit the alarm, and then press the  
Scroll [u/d] key in the Edit Alarm screen to set Time, or  
Melody.  
[z] or [u] key Previous Week  
Move to another week  
[x] or [d] key Next Week  
Press the [AM] or [PM] Soft key ([[]) to select AM or PM  
[1] key Previous Month  
Move to the previous or  
next month  
time format for setup.  
[3] key Next Month  
Calendar  
Press the [New] Soft key ([]]) to add a new event.  
To manage existing events, press the [Option] Soft key  
([[]) to select from the following functions.  
Calendar helps you manage your schedule including your  
time for calls or special days. You can set alarms service on  
a set date with this function.  
65  
My Stuff  
•Go to Date: Moves to the set date.  
The [Save Number] option is displayed only when a  
phone number is saved in an event.  
NOTE  
•Go to Today: Moves to today for selection.  
•View All Events: Shows all of your scheduled events.  
•Delete All Events: Deletes all of your scheduled events.  
Event View & Edit  
This function displays the events individually and edits the  
schedule or creates a new schedule.  
•Memory Info: Displays the number of stored events (up  
to 50).  
To create a new event in Event View & Edit  
Use the Scroll keys to select the date you want then press  
the [o] key. For dates containing events, switch to Daily  
View to check the schedule.  
❶Select a day from Monthly View or scroll to a day and  
press the [New] Soft key ([]])  
❷On the New Event screen, select and input an event item  
Events recorded for a date are displayed at the bottom of  
the display as an icon.  
by item for registration.  
❸After input, press the [o] key to save the event.  
Daily View  
You can create up to 50 events. You can create up to 5  
events for a day. You can create events for dates from 01/01/1950  
to 12/31/2043.  
NOTE  
This function displays the events recorded for a date. Select  
a date then press the [o] key to view or edit the details of  
specific events.  
Memo  
To manage existing events, press the [Option] Soft key  
([[]) to select from the following functions.  
•Delete: Deletes an event.  
This function enables you to create text and voice memos  
on your phone. Press the [Menu] Soft key, select 7.My Stuff,  
select 5.Tools, and then select 3.Memo. To manage text  
memos, press the [Option] Soft key ([[]) to select from the  
following functions.  
•Delete All: Deletes all events.  
•Save Number: If the selected number is not saved on  
the SIM or the phone, this option appears. Saves the  
selected number to the SIM or the phone.  
•Edit: Retrieve existing memos, edit existing memos, and  
press the [o] key to save modified memos.  
66  
My Stuff  
To manage voice memos:  
Press the [o] key and [Edit] Soft key ([]]) to return to  
Tip  
the editing screen.  
To manage voice memos, press the [Option] Soft key ([[])  
to select from the following functions.  
•Delete/Delete All: Delete any or all items.  
(For more information about using the editor, see 7.  
Entering text on page 35.)  
•Send as Multimedia Message: Attach the AMR file and  
send as multimedia message.  
•Rename: Renames the voice memo.  
•Delete: Deletes the selected voice memo.  
•Delete All: Deletes all voice memos.  
•File Info: Views the information about a file.  
To play a voice memo:  
Voice Memo  
The Voice Memo function records your voice messages.  
You can use Record, Stop, Play, and Save for voice  
recording and playback.  
Press the [Menu] Soft key, select 7.My Stuff, select 5.Tools,  
and then select 4.Voice Memo.  
❶Select an item in the voice memo list, and press the [o]  
To record a voice memo:  
key to play immediately.  
❶Press the [New] Soft key ([]]) to start recording  
❷Press the [ ] key or [ ] key to rewind or fast forward.  
❸Press the [ ] key to play or pause a voice memo.  
❹Press the [ ] key to stop a voice memo.  
immediately.  
❷Press the [ ] key to terminate the recording process  
and press the [Play] Soft key to hear the recorded data  
before saving the voice data.  
World Time  
❸Press the [Re-rec] key to re-record a voice message.  
This function informs you of world times.  
❹Press the [ ] key, input a name, and press the [o] key  
Press the [Menu] Soft key, select 7.My Stuff, select 5.Tools,  
select 5.World Time.  
to save the data.  
When the memory is full, the “Not Enough Memory”  
message appears and you return to the menu.  
Tip  
To manage world times, press the [Options] Soft key ([[])  
to select from the following functions.  
67  
My Stuff  
•Daylight-saving On/Off: Specifies whether the current  
time of the selected place is adjusted to Daylight saving  
time.  
A [ ] icon indicates that daylight-saving is activated for  
that place.  
Converter  
Converter converts a figure between different units, i.e.  
length, area, volume, weight and temperature.  
❶Press the [Menu] Soft key, select 7.My Stuff, select  
5.Tools, and then select 7.Converter.  
Daylight-saving sets the clock one hour ahead.  
Tip  
❷Select Length, Area, Volume, Weight, or Temperature.  
•Press the [d] key to move to the next line, press the  
[l/r] key to select a target unit, and press the number  
keys to input numbers.  
Calculator  
Your phone has a Calculator function. Calculator provides  
four basic operations: +, -, x, and /.  
•Press the [d] key again to move to the next line and  
Press the [Menu] Soft key, select 7.My Stuff, select 5.Tools,  
and then select 6.Calculator.  
select a result unit to get the converted figure.  
•The result is automatically recalculated upon a change of  
unit or value.  
Press the number keys and direction keys to input a  
calculation then press = to display the result.  
•Press the Soft key ([[]) to input a decimal point.  
To input a decimal, press the [[]) key.  
Tip  
Stopwatch  
Press and hold the [c], or press the Soft key ([]]) to  
Stopwatch measures time for sports activities.  
reset the formula.  
Press the [Menu] Soft key, select 7.My Stuff, select 5.Tools,  
and then select 8.Stopwatch.  
Press the [c] key briefly to delete the text of a formula  
and press and briefly hold the [c] key to delete the whole  
formula.  
•Press the [ ] key to operate the Stopwatch.  
•Press the [ ] key to pause the Stopwatch and press the  
[
] key to restart the Stopwatch.  
68  
My Stuff & Address Book  
Address Book  
You can store your personal entries, which can be added or  
deleted at any time, on your phone. You can save up to 800  
contacts on the SIM or in your phone memory. Entries that  
can be stored on the SIM card depend upon the storage  
capacity of the card.  
•When you select the [Lap] Soft key ([[]), the two lap  
times as a maximum are displayed and when you select  
the second [Lap] Soft key ([[]), the Stopwatch stops.  
•Press the [Reset] Soft key ([]]) to initialize all.  
SIM Tool Kit  
SIM Tool Kit performs the function supported by SIM.  
Press the [Menu] Soft key, select 7.My Stuff, select 5.Tools,  
and then select 9.SIM Tool Kit.  
Name Search  
Press the [Menu] Soft key, select 8.Address Book, and then  
select 1.Name Search.  
If SIM supports this service, when the user selects the  
supported menu, you can see or receive the information  
about the selected menu.  
To search for a phone number from Address Book, do the  
following procedure.  
This menu depends on SIM and network services.  
❶Input a name. The entry list is shown and the cursor is  
placed on an item that matches your input data.  
Memory Status  
❷Press the [u/d] key to view the recorded numbers.  
❸Press the [o] key to view all.  
This function displays the information of the memory usage  
status for Photo, Image, Sound, Voice, Games, Message,  
and System.  
To manage entries, press the [Option] Soft key ([[]) to  
select from the following functions.  
System memory refers to the total memory used for  
reserved objects, user defined wallpapers, etc.  
NOTE  
•Add Entry: Creates a new entry.  
•Edit: Edits and saves the entry.  
•Delete: Deletes the selected item.  
•Copy: Copies memory to SIM or phone.  
Press [Menu] Soft key, select 7.My Stuff, and then select  
6.Memory Status.  
69  
Address Book  
•SIM Card: Name( ), Mobile( ), Group( ), Picture( ),  
and Melody(  
NOTE  
When you copy memory to phone, select the “Change  
Type”- Mobile, Home, or Office.  
)
•Send Message: Sends a message to a selected recipient.  
Speed Dial  
•Add to Speed Dial: Adds the selected number to speed  
This function enables you to use the Speed Dialing function  
to dial the entry by pressing a Speed Dial number in  
Standby mode.  
dial.  
•Language: Selects Spanish or French. English is the  
default selection.  
The Speed Dial numbers range from 2 to 9, totaling 8  
Speed Dial numbers.  
•Group Search: Searches for the phone number of each  
group.  
Pressing and holding the [0] or the [1] key is the prefix  
NOTE  
•Forward Contact Info: Sends the information of the  
person selected in the View Names list in the form of a  
business card.  
for international calls or the Voice Mail service, respectively.  
To set Speed Dial  
Pres the [Menu] Soft key, select 8.Address Book, and then  
select 3.Speed Dial.  
Add Entry  
Press the [Menu] Soft key, select 8.Address Book, and then  
select 2.Add Entry.  
To add to Speed Dial  
•Press the [z/x] key or the [u/d] key to move to an empty  
Then add the entry information for other people. Initially, an  
empty field with grey appears until you input text.  
entry and press the [Add] key.  
•Press the [z/x] key or the [u/d] key to select a person.  
•Press the [Options] Soft key ([[]) to select the language  
and search for Spanish or French. (English is the default  
selection.)  
Depending on the SIM Card or Phone setup in the Save to  
pop-up window, the following fields are displayed.  
•Phone: Name( ), Mobile( ), Home( ), Office( ),  
Group( ), Picture( ), Melody( ), E-mail1( ),  
E-mail2( ), and Memo(  
•Press the [o] key to save an item in the Speed Dial list.  
)
70  
Address Book  
To edit Speed Dial  
Group  
❶If you want to edit a particular item in the speed dial list,  
move the cursor to the item and press the [Edit] Soft key  
([]]) to update the item.  
This function is used to configure the settings for the four  
predefined caller groups: Family, Friends, Business, and  
VIP  
❷Press the [Options] Soft key ([[]) to select the language  
and search for Spanish or French. (English is the default  
selection.)  
Press the [Menu] Soft key, select 8.Address Book, and then  
select 4.Groups.  
To manage the Groups, press the [Options] Soft key ([[])  
❸Press the [o] key to save an item in the Speed Dial list.  
to select from the following functions.  
•Group Ringtones: Sets a Group, Melody, and Photo.  
To remove from Speed Dial  
•Rename: Renames a group in the user defined group.  
If you want to remove a particular item in the speed dial list,  
move the cursor to the item and press the Soft key ([[]) to  
remove an item.  
•Delete: Deletes the selected groups in the user defined  
group.  
To set Speed Dial in Name Search  
The Rename and Delete menus do not appear in the  
Default Group.  
NOTE  
Press the [Menu] Soft key, select 8.Address Book, and then  
select 1.Name Search.  
Press the [New] Soft key ([]]) to set a new group.  
❶Press the [z/x] key or the [u/d] key to select a person.  
❷To add Speed Dial, press the [Options] key and select  
Memory in Use  
the [Add to Speed Dial] option in the list.  
This function enables you to specify whether you want to  
save your entry information on your Phone, on your SIM  
Card, or on either Phone or SIM.  
❸Press the [z/x] key or the [u/d] key to move to an empty  
entry.  
Press the [Menu] Soft key, select 8.Address Book, and then  
select 5.Memory in Use.  
❹Press the [o] key to save an item in the Speed Dial list.  
71  
Address Book  
Press the [Edit] Soft key ([]]) to edit an Own Number.  
Delete All  
This function deletes all information saved on your phone  
or SIM card.  
Memory Info  
Press the [Menu] Soft key, select 8.Address Book, and then  
select 9.Memory Info.  
Press the [Menu] Soft key, select 8.Address Book, and then  
select 6.Delete All.  
Select Memory Info and press the [o] key to display the  
Press the [o] key and type the phone password.  
usage and free memory space in Phone and SIM memory.  
Copy All  
Service Numbers  
This feature might not be available depending on your SIM  
card.  
This function copies all information saved on the Phone/SIM  
card to SIM or Phone.  
Press the [Menu] Soft key, select 8.Address Book, and then  
select 7.Copy All.  
The list of numbers in the SDN (Service Dial Number)  
appears.  
Press the [Menu] Soft key, select 8.Address Book, and then  
select 10.Service Numbers.  
My Phone Number  
Press the [Menu] Soft key, select 8.Address Book, and then  
select 8.My Phone Number.  
If necessary, scroll to a number by pressing the [z/x] key or  
the [u/d] key and press the [s] key to dial the number.  
The number for My Phone Number can vary depending on  
the SIM.  
Press the [Options] Soft key ([[]) to select following  
functions.  
•Add: Adds an Own Number.  
•Delete: Deletes an Own Number.  
72  
Settings  
This function enables you to personalize how your phone  
operates.  
Greeting  
This function allows you to set the greeting message  
displayed in Startup or Idle mode.  
Display  
Press the [Menu] Soft key, select 9.Settings, select  
1.Display, and then select 3.Greeting.  
You can define how information is displayed on your phone.  
Press the [Menu] Soft key, select 9.Settings, and then select  
1.Display.  
Contrast  
This function allows you to set the backlighting level from 1  
to 8 for your phone’s main display.  
Shop Graphics  
Selecting this menu launches the Web browser to  
Cingular’s Graphic menu.  
Press the [Menu] Soft key, select 9.Settings, select  
1.Display, and then select 4.Contrast.  
Main Screen  
Press the [l/r] key to change the value that you want and  
press the [o] key.  
This function allows you to change the idle screen image  
shown on your phone’s main display.  
Backlight  
Press the [Menu] Soft key, select 9.Settings, select  
1.Display, and then select 2.Main Screen.  
This function allows you to specify for how long your  
phone’s displays are backlight.  
•Wallpaper: You can select one of five default images and  
one as an idle-screen image. To delete wallpapers other  
than the default, press the [Delete] Soft key ([[]). (You  
cannot delete the default wallpaper.)  
❶Press the [Menu] Soft key, select 9.Settings, select  
1.Display, and then select 5.Backlight.  
❷Choose how long you want backlighting of your phone’s  
displays to remain on if you do not touch any key. You  
can choose 5 Secs, 10 Secs, 20 Secs, 1 Min, and 10  
Mins.  
•Wallpaper Type: Digital Clock /Greeting  
73  
Settings  
Silent.  
❸Press the [l/r] key to change the duration value that  
you want and then press the [o] key.  
•Sound: Sound is composed of several groups such  
as Melody Sound, MP3 Sound, Bell Sound, and User  
Sound. Each group has multiple tones. User Sound  
presents the melody that results when you press the  
[Menu] Soft key, select 7.My Stuff, and then select  
2.Audio.  
Audio  
You can define how sound is played on your phone.  
Press the [Menu] Soft key, select 9.Settings, and then select  
2.Audio.  
Sounds define how your phone reacts when you receive  
a call or a message, how your keypad sounds when you  
press a key, and more.  
Volume  
Specifies how loudly your phone rings.  
Press the [Menu] Soft key, select 9.Settings, select 2.Audio,  
and then select 3.Volume.  
You can either leave the default ringtone, key tone, and  
other settings, or you can personalize them to your needs.  
•Ring Volume: Controls the volume in eight levels.  
Shop Tones  
•Key Volume: Controls the volume in eight levels.  
Selecting this menu launches the Web browser to  
Cingular’s Tone menu.  
Alert Tones  
Ringtone  
This function allows you to specify how your phone alerts  
you when you receive messages.  
Press the [Menu] Soft key, select 9.Settings, select 2.Audio,  
and then select 2.Ringtone.  
Press the [Menu] Soft key, select 9.Settings, select 2.Audio,  
and then select 4.Alert Tones.  
Select the preferred ring type, melody to ring.  
•Ring Type: Specifies how your phone rings or vibrates  
when you receive calls. You can choose Ringing Tone,  
Vibration, Vib then Ring, Vib and Ring, Ascending, or  
You can personalize the following.  
•Alerting: Specifies at what intervals you will be reminded  
74  
Settings  
You can personalize the following.  
when you have received a message. Press the [l/r] key  
to select Off, Once, Every 2 Mins, or Every 5 Mins.  
•Tone Type: Specifies whether your phone’s flip tone is  
turned on or off.  
•Ring Volume: Controls the volume in eight levels.  
•Ring Volume: Controls the volume in eight levels.  
•Sound: Specifies the Message Alert Tone. Press the  
[l/r] key to set Message Alert Tone to Bell 1, Bell 2, or  
Bell 3.  
•Sound: Specifies the flip open tone. You can choose from  
Bell 1, Bell 2, or Bell 3.  
Key Tone  
Sound Effects  
This function allows you to select the sound you hear when  
you press your phone’s keys.  
This function allows you to turn the default sound effect on  
or off for various events.  
Press the [Menu] Soft key, select 9.Settings, select 2.Audio,  
and then select 5.Key Tone.  
Press the [Menu] Soft key, select 9.Settings, select 2.Audio,  
and then select 7.Sound Effects.  
You can personalize the following.  
Press the [Mark] Soft key, and then press [o] key to save  
the effect.  
•Tone Type: Specifies whether key tones are turned on  
or off.  
•WAP Connection: When you connect or end a WAP  
session.  
•Sound: Specifies the key tone sound to Beep, DTMF, or  
Bell 1~3.  
•Minute Minder: Every minute while making a phone call.  
•Call Connection: When you dial or hang up.  
Flip Open Tone  
This function allows you to select the sound you hear when  
you open your phone’s flip.  
Call  
Call Settings define how your phone reacts when you  
receive a call or a message, and specifies how calls are to  
be answered on your phone.  
Press the [Menu] Soft key, select 9.Settings, select 2.Audio,  
and then select 6.Flip Open Tone.  
75  
Settings  
Press the [Menu] Soft key, select 9.Settings, and then select  
3.Call.  
When Busy  
This function forwards only those calls that receive a busy  
connection or that otherwise would have returned the busy  
indication to the caller.  
Call Forward  
This function allows you to divert incoming calls to another  
phone number.  
•Activate: Sets up Call Forwarding When Busy.  
•Deactivate: Cancels the preset Call Forwarding When  
Busy.  
Press the [Menu] Soft key, select 9.Settings, select 3.Call,  
and then select 1.Call Forward.  
•Status: Informs the setup condition.  
Choose Forward Always, When Busy, On No Answer,  
When not Found, or Cancel All, all of which divert the call  
as required.  
•By Service: Sets up Call Forwarding When Busy for each  
service (All Services, Voice calls, Data and Fax)  
Because call forwarding is a network service, you must  
contact your service provider to verify the availability of the  
service.  
On No Answer  
This function forwards the calls that are not answered or not  
picked up by the called party within a specific time.  
Forward Always  
•Activate: Sets up Call Forwarding On No Answer.  
This function forwards all calls without regard to the  
condition. It does not even matter if the mobile phone is  
switched on or off.  
•Deactivate: Cancels the preset Call Forwarding On No  
Answer.  
•Status: Informs the setup condition.  
•Activate: Sets Call Forwarding Always.  
•Deactivate: Cancels Call Forwarding Always.  
•Status: Informs the setup condition.  
•By Service: Sets up Call Forwarding On No Answer for  
each service (All Services, Voice calls, Data and Fax)  
When not Found  
•By Service: Sets up Call Forwarding Always for each  
service (All Services, Voice calls, Data and Fax).  
If the mobile subscriber is currently out of the GSM network  
or decides to switch off the mobile phone, this service  
76  
Settings  
•Flip Open: Incoming calls are answered by opening your  
phone’s flip.  
forwards all of the subscriber’s calls to the indicated  
number.  
•Auto Answer: Your phone automatically answers calls  
after 10 seconds. This feature is available only when a  
headset is connected to your phone’s headset jack.  
•Activate: Sets up Call Forwarding When not Found.  
•Deactivate: Cancels the preset Call Forwarding When  
not Found.  
Auto Redial  
•Status: Informs the setup condition.  
This function automatically redials the number you call if  
your call is unsuccessful.  
•By Service: Sets up Call Forwarding When not Found for  
each service (All Services, Voice calls, Data and Fax)  
❶Press the [Menu] Soft key, select 9.Settings, select  
3.Call, and then select 3.Auto Redial.  
Cancel All  
Cancel the Call Forward options.  
❷Select On or Off.  
Answer Type  
Call Waiting  
This function allows you to specify how calls are to be  
answered on your phone.  
This function informs you that you have received a second  
call while you are in a call.  
❶Press the [Menu] Soft key, select 9.Settings, select  
3.Call, and then select 2.Answer Type.  
Press the [Menu] Soft key, select 9.Settings, select 3.Call,  
and then select 4.Call Waiting.  
❷Use the [l/r] key to set the call receiving method. Press  
•Activate: Activates the Call Waiting feature.  
the [o] key to save.  
•Deactivate: Cancels the Call Waiting feature.  
•Send key: Incoming calls are answered by pressing the  
[s] key.  
•Status: Indicates whether or not the Call Waiting feature  
is activated.  
•Any Key: Incoming calls are answered by pressing any  
key except the [e] key and the [Reject] Soft key.  
77  
Settings  
You can set up Time, Time Format and Date, and Date  
Format by pressing the [o] key  
If you select On for Automatic, the time and date are  
updated automatically.  
Caller ID  
This function prevents your phone number from being  
displayed on the phone of the people you call.  
This service is network dependent. Please inquire with  
your network provider.  
NOTE  
Flight Mode  
Press the [Menu] Soft key, select 9.Settings, select  
4.Phone, and then select 3.Flight Mode.  
Press the [Menu] Soft key, select 9.Settings, select 3.Call,  
and then select 5.Caller ID.  
After you select Flight Mode On, you cannot call or receive  
calls. This mode enables you to cut off the radio session  
but maintains power to other ancillary functions such as the  
calendar, games, and other features. This mode supports  
use of these features in environments where transmitters  
or receivers are not allowed, such as on an airplane. If you  
select Flight Mode Off, your phone reboots.  
Phone  
Language  
This function allows you to select which language is  
displayed on your phone.  
Press the [Menu] Soft key, select 9.Settings, select  
4.Phone, and then select 1.Language to select a language  
for the display.  
Security  
The security settings enable you to restrict the use of your  
phone to specific people and types of calls.  
Select Automatic to set the language as English.  
NOTE  
Time & Date  
Codes and passwords are used to protect these features of  
your phone. They are described in the following sections.  
See also 2. Access codes in the Appendix, on page 85.  
This function allows you to set the time and date displayed  
on your phone.  
Press the [Menu] Soft key, select 9.Settings, select  
4.Phone, and then select 2.Time & Date.  
The security settings enable you to restrict the use of your  
phone to specific people and types of calls.  
78  
Settings  
Your phone’s security features keep your phone and SIM  
card safe from unauthorized use. You can either set a  
password for your phone or use the Call Barring service  
and Fixed Dialing mode to restrict which calls can be made  
using your phone.  
password is input.  
Press the [o] key after you type the password.  
Change Password  
This function allows you to change your phone’s password.  
The default password is 1234.  
Press the [Menu] Soft key, select 9.Settings, and then select  
5.Security.  
Phone Barring  
PIN1 Check  
This function offers multiple methods to limit incoming or  
outgoing calls. In general, the barring service becomes  
activated by interoperating with the network, but phone  
barring is made by the phone itself. Major functions are as  
follows.  
Press the scroll [l/r] key and [o] key for setup.  
If you input the incorrect PIN1 code three consecutive  
times, you will be prompted to input the PUK1 number. The  
default is Disabled.  
•Incoming: Limits all incoming calls.  
•On: Sets up all incoming calls barring.  
•Off: Cancels all incoming calls barring.  
•Enabled: Input PIN1 whenever the power is turned on.  
•Disabled: Does not input PIN1 whenever the power is  
turned on.  
•Outgoing: Limits all outgoing calls. When you attempt  
to make a call that has the prefixed number that you  
previously registered, the call is barred.  
Change PIN1  
Change the PIN1 number.  
You can change the PIN1 number only when the phone is  
set for PIN1 Enable.  
•Bar All: Sets up all outgoing calls barring.  
•Bar Prefixed: Adds and deletes the prefixed number. (Prefix  
also means your 10 or 11 digit number of your choosing)  
Phone Lock  
•Off: Cancels all outgoing calls barring including the bar  
prefixed.  
This function allows you to lock your phone until the correct  
79  
Settings  
•Incoming Calls When Abroad: Limit all international  
incoming calls. When you are in the Fplmn state and  
not the Hplmn state, that is, when you are receiving a  
roaming service, incoming calls will be barred.  
Fixed Dialing (Fixed Dialing Numbers)  
Fixed Dialing is a service that limits your access to specific  
numbers in the Address Book list recorded on the SIM.  
Input the PIN2 to set up or cancel this service. (PIN 2 must  
be correctly entered within 3 tries.)  
•Delete All: Cancels all the barring settings.  
•Change Password: Replaces the old password with a  
new one.  
•On  
•Off  
Closed User Group (CUG)  
•Fixed Dial List: Display the numbers recorded in the  
Fixed Dialing list.  
This function allows you to set up a group of numbers that  
you want to dial or receive calls from.  
Change PIN2  
Select CUG name and press [o] to see the CUG name list  
This function allows you to change your phone’s PIN2 code.  
as you input.  
Network Barring  
This service is dependent on the SIM.  
This function is available only if the service provider  
provides such a function and you have subscribed to it.  
Press the [Delete] Soft key ([[]) to delete the CUG  
Identifier, or the [Edit] Soft key ([]]) to edit the CUG  
Identifier.  
You can set limitations for making certain types of calls:  
•Outgoing Calls: Limits all Outgoing calls.  
NOTE  
In Empty record, the Soft key ([[]) will turn into the  
[Add] Soft key and move to the name input screen for a new CUG  
registration.  
•International Calls: Limits an outgoing and incoming  
international call.  
•Only Local/Home: Limits other international calls except  
home country.  
Software Version  
This function allows you to display your phone’s current  
software version.  
•Incoming Calls: Limits all incoming calls.  
80  
Settings  
Press the [Menu] Soft key, select 9.Settings, and then select  
6.Software Version.  
Reset  
This function allows you to delete all user settings and data  
from your phone and returns it to factory-default settings.  
Press the [Menu] Soft key, select 9.Settings, and then select  
7.Reset.  
Input the phone password and press the [o] key to reset.  
The default password is 1234.  
TTY  
TTY (also known as a TDD or Test Telephone) is a  
telecommunications device that allows people who are  
deaf or hard of hearing, or who have speech or language  
disabilities, to communicate via a telephone.  
Your phone is compatible with select TTY devices which  
have an internal CTM. Please check with the manufacturer  
of your TTY device for connectivity information and to  
ensure that the TTY device supports digital wireless  
transmission.  
Press the [Menu] Soft key, select 9.Settings, and then select  
8.TTY.  
81  
Appendix  
1. Menu tree  
2. Access codes  
3. Troubleshooting checklist  
4. Performance and safety  
5. Glossary  
6. FCC & Industry Canada  
Regulatory Compliance  
4
Menu tree  
2.10.1 Common Settings  
2.10.2 Text Message  
2.10.3 Multimedia Message  
2.10.4 Voice Mail  
3.6.1  
3.6.2  
3.6.3  
3.6.4  
Current Info  
Last Info  
5.6  
MEdia Net Home  
1 Camera  
1.1  
Take a Photo  
Photo Album  
Settings  
Total Info  
6 Mobile Email  
7 My Stuff  
1.2  
Clear Logs  
1.3  
2.10.5 Browser Message  
1.3.1  
1.3.2  
1.3.3  
1.3.4  
1.3.5  
Image Size  
Shutter Sound  
Flash  
4 MEdia Net  
2.11  
Memory Info  
7.1  
Games & Apps  
4.1  
MEdia Net Home  
7.2  
Audio  
3 Recent Calls  
4.2  
Bookmarks  
Go to URL  
Profiles  
7.3  
Graphics  
Photo Album  
Tools  
Self Timer  
Multi-Shot  
3.1  
Missed Calls  
4.3  
7.4  
3.2  
Received Calls  
Dialed Calls  
Delete Call Logs  
Missed Calls  
Received Calls  
Dialed Calls  
All Calls  
4.4  
7.5  
3.3  
4.5  
Cache  
2 Messaging  
7.5.1  
7.5.2  
7.5.3  
7.5.4  
7.5.5  
7.5.6  
7.5.7  
7.5.8  
7.5.9  
7.6  
Alarm  
3.4  
4.5.1  
4.5.2  
4.6  
Cache Mode  
Clear Cache  
Security  
Calendar  
Memo  
2.1  
Write New  
3.4.1  
3.4.2  
3.4.3  
3.4.4  
3.5  
2.1.1  
2.1.2  
2.2  
Text Message  
Multimedia Message  
Inbox  
Voice Memo  
World Time  
Calculator  
Converter  
Stopwatch  
SIM Tool Kit*  
Memory Status  
Certifications  
Version  
4.7  
2.3  
IM  
Call Time  
2.4  
Sent  
5 Cingular Mall  
3.5.1  
3.5.2  
3.5.3  
3.5.4  
3.5.5  
3.6  
Last Call  
2.5  
Outbox  
Received Calls  
Dialed Calls  
Total Calls  
5.1  
5.2  
5.3  
5.4  
5.5  
Shop Tones  
2.6  
Draft  
Shop Games  
2.7  
Browser Msg  
Voicemail  
Templates  
Settings  
Shop Graphics  
Shop Multimedia  
Shop Applications  
2.8  
Reset Call Times  
GPRS Info  
8 Address Book  
2.9  
8.1  
Name Search  
2.10  
84  
Menu tree  
8.2  
8.3  
8.4  
8.5  
8.6  
8.7  
8.8  
8.9  
8.10  
Add Entry  
9.2.6  
9.2.7  
9.3  
Flip Open Tone  
Sound Effects  
Call  
9.7  
Reset  
TTY  
Speed Dial  
9.8  
Groups  
9.8.1  
Setting  
Memory in Use  
Delete All  
9.3.1  
9.3.2  
9.3.3  
9.3.4  
9.3.5  
9.4  
Call Forward  
Answer Type  
Auto Redial  
Call Waiting  
Caller ID  
Copy All  
My Phone Number  
Memory Info  
Service Numbers*  
Phone  
9.4.1  
9.4.2  
9.4.3  
9.5  
Language  
9 Settings  
Time & Date  
Flight Mode  
Security  
9.1  
Display  
9.1.1  
9.1.2  
9.1.3  
9.1.4  
9.1.5  
9.2  
Shop Graphics  
Main Screen  
Greeting  
9.5.1  
9.5.2  
9.5.3  
9.5.4  
9.5.5  
9.5.6  
9.5.7  
9.5.8  
9.5.9  
9.6  
PIN1 Check  
Change PIN1  
Phone Lock  
Change Password  
Phone Barring  
Fixed Dialing  
Change PIN2  
Network Barring*  
Closed User Group*  
Software Version  
Contrast  
Backlight  
Audio  
9.2.1  
9.2.2  
9.2.3  
9.2.4  
9.2.5  
Shop Tones  
Ringtone  
Volume  
* This menu depends on SIM.  
The following section  
Alert Tones  
Key Tone  
85  
Access codes  
describes various security codes used on your phone.  
PUK1 and PUK2 codes (8 digits)  
The PUK1 (Personal Unblocking Key) code is required to  
unblock a blocked PIN1 code. The PUK2 code is required  
to unblock a blocked PIN2 code. If the codes are not  
supplied with the SIM card, contact the operator whose SIM  
card is in your phone for the codes.  
PIN1 code (4 to 8 digits)  
The PIN1 (Personal Identification Number) code protects  
your SIM card against unauthorized use. The PIN1 code is  
usually supplied with the SIM card. If you input the incorrect  
PIN1 code entry three times in a row, the PIN1 code will be  
blocked. If the PIN1 code is blocked, you need the PUK 1  
code to unblock before you can use the SIM card again.  
See information on the PUK1 code.  
You can change the following codes: lock code, PIN1  
code, and PIN2 code. These codes can include numbers from 0 to  
NOTE  
9 only. The [#] key works as the [o] function.  
Avoid using access codes similar to emergency numbers  
such as 112, to prevent accidental dialing of an emergency  
number.  
PIN2 code (4 to 8 digits)  
The PIN2 code, supplied with some SIM cards, is required  
to access some functions, such as call cost counters.  
Contact your carrier for information.  
Network Barring Password (4 digits)  
The N/W password is required when you use the N/W  
Barring function. Your service provider will provide the N/W  
password to you when you subscribe to this function.  
Lock code  
The lock code can be used to lock the phone and keypad to  
avoid unauthorized use.  
You can change this password using the Call barring  
function.  
The factory setting for the lock code is 1234. To avoid  
unauthorized use of your phone, change the lock code. Keep the  
new code secret and in a safe place separate from your phone.  
NOTE  
(For further details, see Security on page 80.)  
86  
Troubleshooting checklist  
If you experience any problem while using your mobile  
phone, please refer to the following checklist. If the problem  
still persists, contact your dealer or nearest service carrier.  
cannot make a connection, contact the nearest service  
carrier.  
When audio quality is poor:  
When the “Insert SIM Card” message appears:  
End a call and try again.  
Make sure the SIM card is correctly installed. Check to see  
if the SIM card is working properly. If it does not work, try to  
clean the contact points of the card. If it is out of order, take  
it to the nearest service carrier.  
When the other party cannot hear you speaking:  
Your phone may be set to MUTE. Disable the MUTE  
function.  
When battery lifetime is shorter than usual:  
When the “Password” message appears in Phone  
locked state:  
This may happen when you are in an area with low signal  
strength. Turn off your phone when it is not in use. Change  
the battery when battery energy is exhausted.  
Enter the phone password. The default password is”1234”.  
If you cannot remember the password, contact the nearest  
service carrier.  
When your mobile phone does not turn on:  
Make sure your battery is charged. Check to see if your  
phone works while recharging the battery.  
When the “Enter PIN1” message appears:  
Input PIN1. If you cannot remember it, contact the nearest  
service carrier. You can still receive calls even if your mobile  
phone becomes locked after entering the incorrect PIN1 on  
three consecutive attempts.  
When you are unable to send a message:  
Either you are not registered to receive an SMS service, or  
you may be in an area where your network service provider  
cannot provide such a service.  
When the “No Service” or “Network Search”  
appears:  
When you are unable to make a call:  
If you cannot make/receive a call when you are indoors  
or undergrounds where the signal strength is poor, move  
toward a window or go out to an open area. If you still  
Your phone may be set to “fixed dial.” Cancel the “fixed dial”  
function.  
87  
Troubleshooting checklist & Performance and safety  
When you are unable to charge the battery:  
Performance and safety  
This may be the result of one of the following three cases.  
The following list shows how to maintain your mobile phone,  
together with precautions to take.  
❶Your charger may be out of order. Contact your nearest  
dealer.  
•Keep your mobile phone and its accessories out of the  
reach of children.  
❷You may be attempting to use the phone in an overly  
hot/cold temperature. Try changing the charging  
environment.  
•Maintain your mobile phone in dry conditions and keep  
it within normal operating temperatures. Temperatures  
higher than 55°C (131°F) or lower than -20°C (-4°F) may  
damage your phone.  
❸Your battery may have not been connected to the  
charger properly. Check the connector.  
When you are unable to input data into your  
Address Book:  
•Do not use or store your mobile phone in dusty, dirty  
areas.  
Your Address Book memory may be full. Try deleting some  
entries from your Address Book.  
•Do not attempt to disassemble your mobile phone.  
•Do not drop or cause severe impact to your mobile  
phone.  
When you are unable to select a certain function:  
You may not have subscribed to that function, or your  
network service provider may be in an area where such  
service cannot be provided. Contact your local service  
provider.  
•Do not use chemical products, cleaning solvents or  
detergents to clean your mobile phone.  
•If your mobile phone does not work properly, contact your  
dealer immediately.  
•Use only authorized batteries, battery chargers and  
accessories. Any malfunction or damage caused by  
the use of unauthorized batteries, battery chargers and  
accessories will void the limited product warranty.  
88  
Performance and safety & Glossary  
•Ensure that the earthing points of the battery and battery  
charger do not come in contact with conductive objects.  
numbers of callers.  
EMS (Enhanced Message Service)  
Network service sending and receiving messages that  
include images, sounds and animations to and from another  
user without having to speak to the correspondent.  
Glossary  
To help you understand the main technical terms and  
abbreviations used in this booklet and take full advantage  
of the features of your mobile phone, here are a few  
definitions.  
GPRS (General Packet Radio Service)  
New non-voice value-added service that allows information  
to be sent and received across a mobile telephone network.  
GPRS guarantees a continuous connection to the Internet  
for mobile phone and computer users. It is based on the  
Global System for Mobile Communication (GSM) circuit-  
switched mobile phone connections and Short Message  
Service (SMS).  
Call Barring  
Ability to restrict outgoing and incoming calls.  
Call Forwarding  
Ability to re-route calls to another number.  
Call Holding  
GSM (Global System for Mobile Communication)  
International standard for mobile phone communication,  
guaranteeing compatibility between the various network  
operators. GSM covers most European countries and many  
other parts of the world.  
Ability to put one call on Standby while answering or making  
another call; you can then switch between the two calls, as  
required.  
Call Waiting  
MMS(Multimedia Message Service)  
Ability to inform users that they have an incoming call while  
engaged on another call.  
Network service sending and receiving messages to  
and from another subscriber without having to speak to  
the correspondent. The Message supports presentation  
of various media types, such as full color images and  
CLI (Caller Line Identification) Services  
Services allowing subscribers to view or block the telephone  
89  
Glossary  
polyphonic ringtones.  
and is protected by the battery.  
Multiparty Calling  
SMS (Short Message Service)  
Ability to establish a conference call involving up to five  
additional parties.  
Network service sending and receiving messages to and  
from another subscriber without having to speak to the  
correspondent. The message created or received can be  
displayed, received, edited or sent.  
PIN (Personal Identification Number)  
Security code that protects the phone/SIM against  
unauthorized use. The PIN is supplied by the service  
provider with the SIM card. It may be a four to eight-digit  
number and can be changed, as required.  
Soft Keys  
Two keys ([[], []]) marked on the phone, that:  
•vary according to the function that you are currently using  
PUK (PIN Unblocking Key)  
•are indicated on the bottom line of the display just above  
Security code used to unlock the phone when an incorrect  
PIN has been entered three times in succession. The eight-  
digit number is supplied by the service provider with the  
SIM card.  
the corresponding key.  
Voice Mail  
Computerized answering service that automatically answers  
your calls when you are not available, plays a greeting  
(optionally in your own voice) and records a message.  
Roaming  
Use of your phone when you are outside your home area  
(when travelling for example).  
SIM (Subscriber Identification Module)  
Card containing a chip with all the information required to  
operate the phone (network and memory information, as  
well as the subscriber’s personal data).  
The SIM card fits into a small slot on the back of the phone  
90  
FCC & Industry Canada Regulatory Compliance  
FCC & Industry Canada Regulatory Compliance  
Statement according to FCC part 15.105  
This device complies with Part 15 of the FCC Rules.  
Operation is subject to the following two conditions: (1) this  
device may not cause harmful interference, and (2) this  
device must accept any interference received, including  
interference that may cause undesired operation.  
This equipment has been tested and found to comply with  
NOTE  
the limits for a Class B digital device, pursuant to Part 15 of the FCC  
Rules. These limits are designed to provide reasonable protection  
against harmful interference in a residential installation. This  
equipment generates, uses and can radiate radio frequency energy  
and, if not installed and used in accordance with the instructions,  
may cause harmful interference to radio communications. However,  
there is no guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to  
radio or television reception, which can be determined by turning  
the equipment off and on, the user is encouraged to try to correct  
the interference by one or more of the following measures:  
•Reorient or relocate the receiving antenna.  
•Increase the separation between the equipment and receiver.  
•Connect the equipment into an outlet on a circuit different from  
that to which the receiver is connected.  
•Consult the dealer or an experienced radio/TV technician for  
help.  
Your mobile device is a low power radio transmitter and  
receiver. When it is ON, it receives and also sends out  
radio frequency (RF) signals. In August 1996, the Federal  
Communications Commission (FCC) adopted RF exposure  
guidelines with safety levels for mobile devices. Those  
guidelines are consistent with safety standards previously  
set by both U.S. and international standards bodies:  
American National Standard Institute (ANSI), National  
Council of Radiation Protection and Measurements(NCRP),  
and International Commission on Non-Ionizing Radiation  
Protection (ICNRP). Those standards were based on  
comprehensive and periodic evaluations of the relevant  
scientific literature. The design of your Phone complies with  
the FCC guidelines and applicable.  
Statement according to FCC part 15.21  
Modifications not expressly approved by this company  
could void the user's authority to operate the equipment.  
RF exposure FCC  
For body worn operation, to maintain compliance with FCC  
RF exposure guidelines, use only accessories that contain  
no metallic components and provide a separation distance  
91  
FCC & Industry Canada Regulatory Compliance  
of 15mm (0.6 inches) to the body. Use of other accessories  
may violate FCC RF exposure guidelines and should be  
avoided.  
and to account for any variations in.  
**This device contains 1800 MHz GSM functions that are  
not operational in U.S. Territories; this filing is applicable  
only for 850 MHz GSM and 1900 MHz PCS operations.  
This device and its antenna must not be co-located  
or operating in conjunction with any other antenna or  
transmitter.  
Health and Safety Information FCC  
This EUT has been shown to be capable of compliance for  
localized specific absorption rate (SAR) for uncontrolled  
environment/general population exposure limits specified  
in ANSI/IEEE Std. C95.1-1992 and had been tested in  
accordance with the measurement procedures specified in  
FCC/OET Bulletin 65 Supplement C (2001) and IEEE Std.  
1528-2003 Ministry of Health (Canada), Safety Code 6.  
The standards include a substantial safety margin designed  
to assure the safety of all persons, regardless of age and  
health. The exposure standard for wireless mobile phones  
employs a unit of measurement known as the Specific  
Absorption Rate, or SAR. The SAR limit set by the FCC is  
1.6W/kg *.  
* In the U.S. and Canada, the SAR limit for mobile phones  
used by the public is 1.6 watts/kg (W/kg) averaged over  
one gram of tissue. The standard incorporates a substantial  
margin of safety to give additional protection for the public  
92  
Safety precautions  
Using a mobile phone while driving may be  
prohibited.  
Switch off in aircraft  
Always switch your phone off or select Flight Mode On  
(press the [Menu] Soft key, select 9.Settings, select  
4.Phone, and then select 3.Flight Mode) when you are in  
an aircraft. The electromagnetic waves emitted by your  
phone may affect the electronic navigation equipment in the  
aircraft.  
Please check local laws and regulations with regard to the  
prohibition of mobile phone use while driving, and comply  
with them.  
Use of your phone while you are driving may disturb your  
concentration and so cause an accident. Always switch your  
phone off as soon as possible.  
Should you use your phone in an emergency, either use a  
hands free device built into your car, or pull over in a safe  
place first.  
Switch off in hospitals and near medical equipment  
Always switch your phone off in hospitals, and obey the  
regulations or rules of the hospital.  
Switch your phone off when using medical equipment  
for private purposes, if possible. Always consult with the  
medical equipment’s manufacturer or an expert regarding  
phone use near the medical equipment.  
Switch off in restricted areas  
Always switch your phone off in areas where mobile phone  
use is restricted.  
Installing a hands free device in your vehicle  
Switch off in explosive or dangerous areas  
Install vehicle hands free devices away from the steering  
wheel and airbag expansion area, otherwise injury may  
result.  
Always switch your phone off in areas with explosive or  
dangerous materials (such as fuels, fuel stations or areas  
containing chemical goods) and obey any instructions or  
signals. Do not remove your mobile phone’s battery in such  
areas.  
93  
Safety precautions  
Mobile phones and other electronic devices  
Mobile phones emit electromagnetic waves that may affect  
nearby electronic devices. When it is switched on, do not  
place your phone close to delicate electronic equipment.  
94  
Warranty  
proven defective in material or workmanship that results  
in product failure within the first twelve (12) months period  
from the date of purchase, such defect(s) will be repaired  
or replaced (with new or rebuilt parts) at the Company’s  
option, without charge for parts or labor directly related to  
the defect(s).  
Protect Your Warranty  
Read your Warranty carefully, with the special consideration  
to paragraph seven of the Limited Warranty for your unit.  
“Warranty does not apply to... or to any product or part  
thereof which has suffered through alteration... mishandling,  
misuse, neglect or accident”.  
The antenna, key pad, display, rechargeable battery and  
battery charger, if included, are similarly warranted for  
twelve (12) months from date of purchase. This Warranty  
extends only to consumers who purchase the product in  
the United States or Canada and it is not transferable or  
assignable.  
Many companies are making look alike accessories and  
in some cases, promoting that their product is equal to or  
better than the Pantech product. Be careful. Some of these  
products may not be compatible to use with your Pantech  
product and may damage the unit or cause it to malfunction.  
If service is required on your unit and it is determined that  
a non-Pantech accessory has created the problem with  
your unit, the Warranty will not apply. In addition, if the unit  
has already suffered irreversible damage by reason of a  
non-compatible accessory, the Warranty will be voided. To  
protect your Warranty, use only compatible accessories  
which cannot damage or interfere with the functioning of  
your Pantech product.  
This Warranty does not apply to:  
(a) Product subjected to abnormal use or conditions, accident,  
mishandling, neglect, unauthorized alteration, misuse,  
improper installation or repair or improper storage;  
(b) Product whose mechanical serial number or electronic  
serial number has been removed, altered or defaced.  
(c) Damage from exposure to moisture, humidity, excessive  
temperatures or extreme environmental conditions;  
(d) Damage resulting from connection to, or use of any  
accessory or other product not approved or authorized by  
the Company;  
12 Month Limited Warranty  
Pantech Wireless, Inc. (the Company) warrants to the  
original retail purchaser of this Pantech handheld portable  
cellular telephone, that should this product or any part  
thereof during normal consumer usage and conditions, be  
(e) Defects in appearance, cosmetic, decorative or structural  
items such as framing and non-operative parts;  
(f) Product damaged from external causes such as fire,  
95  
Warranty  
flooding, dirt, sand, weather conditions, battery leakage,  
blown fuse, theft or improper usage of any electrical  
source.  
THE DURATION OF THIS WRITTEN WARRANTY. ANY  
ACTION FOR BREACH OF ANY WARRANTY MUST  
BE BROUGHT WITHIN A PERIOD OF 18 MONTHS  
FROM DATE OF ORIGINAL PURCHASE. IN NO CASE  
SHALL THE COMPANY BE LIABLE FOR ANY SPECIAL  
CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR  
BREACH OF THIS OR ANY OTHER WARRANTY,  
EXPRESS OR IMPLIED, WHATSOEVER. THE  
COMPANY SHALL NOT BE LIABLE FOR THE DELAY IN  
RENDERING SERVICE UNDER THIS WARRANTY OR  
LOSS OF USE DURING THE TIME THE PRODUCT IS  
BEING REPAIRED OR REPLACED.  
The Company disclaims liability for removal or reinstallation  
of the product, for geographic coverage, for inadequate  
signal reception by the antenna or for communications  
range or operation of the cellular system as a whole.  
To obtain repairs or replacement within the terms of this  
Warranty, the product should be delivered with proof of  
Warranty coverage (e.g. dated bill of sale), the consumer’s  
return address, daytime phone number and/or fax number  
and complete description of the problem, transportation  
prepaid, to the Company by calling the number listed  
below or to the place of purchase for repair or replacement  
processing.  
No person or representative is authorized to assume for  
the Company any liability other than expressed herein in  
connection with the sale of this product.  
Some states or provinces do not allow limitations on how  
long an implied warranty lasts or the exclusion or limitation  
of incidental or consequential damage so the above  
limitation or exclusions may not apply to you. This Warranty  
gives you specific legal rights, and you may also have other  
rights which vary from state to state or province to province.  
In addition, you may telephone us at (800) 962-8622, or  
email us at [email protected]  
THE EXTENT OF THE COMPANY’S LIABILITY UNDER  
THIS WARRANTY IS LIMITED TO THE REPAIR OR  
REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT,  
SHALL THE COMPANY’S LAIBILITY EXCEED THE  
PURCHASE PRICE PAID BY PURCHASER FOR THE  
PRODUCT.  
ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED  
WARRANTY OF MERCHANTABILITY OR FITNESS FOR  
A PARTICULAR PURPOSE, SHALL BE LIMITED TO  
PANTECH WIRELESS, INC.  
11240 Warland Drive, Cypress, CA 90630 (800) 962-8622  
96  

Troy Bilt 071 User Manual
Sony 1261 4434 User Manual
Seagate Barracuda ST3160023AS User Manual
Samsung GH68 18879A User Manual
RCA RC170I User Manual
Philips HD7546 User Manual
Panasonic DVD K520D User Manual
Panasonic DVCPRO AJ PCS060G User Manual
Omega LDP 144 User Manual
Nokia 6250 User Manual