Model No.
Portable CD player
SL-SX320/SL-SX315
Operating Instructions
SL-SX313/SL-SX321C
Dear Customer
Thank you for purchasing this product. Before connecting, operating or
adjusting this product, please read these instructions completely. Please
keep this manual for future reference.
The model number and serial
number of this product can be
found on either the back or the
bottom of the unit.
Please note them in the space
provided below and keep for
future reference.
MODEL NUMBER
SERIAL NUMBER
HOLD
This function causes the unit to ignore accidental button presses.
Set to HOLD so the unit doesn’t power on accidentally or play is interrupted.
Note on CD-R and CD-RW
This unit can play CD-DA format audio CD-R and CD-RW that have been
§
finalized upon completion of recording. It may not be able to play some
CD-R or CD-RW due to the condition of the recording.
§Finalizing is a process that enables CD-R/CD-RW players to play audio
CD-R and CD-RW.
Resume function
The player stores the track where you stopped play or power was cut off.
Opening the lid when the unit is in stop mode cancels the function.
Auto power off function
If the unit is left in stop mode for approximately 10 minutes, the unit powers
itself off automatically.
p
P
PC
PY
Panasonic Consumer Electronics Company,
Panasonic Canada Inc.
Division of Matsushita Electric Corporation of America
Panasonic Sales Company,
C 2002 Matsushita Electric Industrial Co., Ltd.
Printed in China
RQT6789-1P
F1102KN1073
Division of Matsushita Electric of Puerto Rico, Inc. (“PSC”)
Ave. 65 de Infantería, Km. 9.5 San Gabriel Industrial Park, Carolina, Puerto Rico 00985
Troubleshooting guide
Display
Before requesting service, make the following checks. If you are in doubt about some of the
check points, or if the remedies indicated in the chart do not solve the problem, see “Product
information”(➪right) for assistance.
(
The HOLD function is on (➪above).
≥You haven’t inserted a disc or it isn’t inserted correctly.
≥You have inserted a disc this unit cannot play.
)
*
'
The disc lid is open.
≥The HOLD function is on (➪above).
≥The disc isn’t correctly set.
Full: The program already contains 20 tracks.
≥The disc is scratched or dirty. (Tracks skipped.)
≥There is moisture on the lens. Wait for about an hour and
then try again.
No play.
≥The lens is dirty: clean it with a blower (recommended
product: SZZP1038C).If the lens gets marked with
fingerprints, gently wipe them off with a cotton swab.
Product service
1. Damage requiring service—The unit should be serviced by qualified service
personnel if:
≥Ensure the plugs are inserted firmly.
≥Wipe the plugs clean with a clean cloth.
No sound or there is a
lot of noise.
1. (a) The AC power supply cord or AC adaptor has been damaged; or
1. (b) Objects or liquids have gotten into the unit; or
1. (c) The unit has been exposed to rain; or
≥The elapsed playing time disappears and sound is interrupted
if bumps continue repeatedly.
≥Separate this unit from mobile telephones.
1. (d) The unit does not operate normally or exhibits a marked change in
performance; or
Play doesn’t resume
from the track where
play stopped at.
≥
This doesn’t work if you open the lid while the unit is in stop mode.
≥This doesn’t work during random play.
≥It may not work correctly under some conditions.
1. (e) The unit has been dropped or the cabinet damaged.
2. Servicing—Do not attempt to service the unit beyond that described in these
operating instructions. Refer all other servicing to authorized servicing personnel.
3. Replacement parts—When parts need replacing ensure the servicer uses parts
specified by the manufacturer or parts that have the same characteristics as the original
parts. Unauthorized substitutes may result in fire, electric shock, or other hazards.
4. Safety check—After repairs or service, ask the servicer to perform safety
checks to confirm that the unit is in proper working condition.
≥Random play modes may be on (➪page 4).
≥
Play resumes from the track where you last stopped play or power
was cut off (play may start from a different track if you change discs
after power is cut off). Use skip to return to the first track.
Play doesn’t start
from the first track.
The unit stops
working.
Disconnect then reconnect all power sources (batteries and AC
adaptor).
The battery indicator
fails to appear or is
incorrect.
Product information
≥
The indicator does not appear when an AC adaptor is connected.
For product information or assistance with product operation:
≥The indicator does not appear correctly under some conditions.
In the U.S.A., contact the Panasonic Customer Call Center at 1-800-211-7262, or
e-mail [email protected], or the website (http://www.panasonic.com).
In Canada, contact the Panasonic Canada Inc. Customer Care Centre at 905-624-5505,
.
User memo:
DATE OF PURCHASE
DEALER NAME
DEALER ADDRESS
TELEPHONE NUMBER
1
Location of controls/Connection to other equipment
Turn off this unit and the other equipment before connection.
Household AC outlet
Tone selection (EQ)
To DC IN jack
Play mode selection (MODE)
Volume control (j, VOL, i)
Skip/Search (: 9)
AC adaptor (RP-AC46) (not included)
Stop /Operation off (∫)
Battery
compartment
Car power adaptor
Display panel
Car audio
(Purchase SH-CDC9 for SL-SX320,
SL-SX315 and SL-SX313)
≥
When you switch off the car, the volume returns to 10.
To Headphone jack
Lens
Some cannot
be connected.
Car stereo cassette adaptor
(Purchase SH-CDM10A for SL-SX320,
A
SL-SX315 and SL-SX313)
≥
Set the unit’s volume to 10.
Audio system
To CD or AUX
terminals
Audio cable (not included)
≥ Set the unit’s volume to 10.
Open switch
Headphone jack
Adjust the volume level on
the audio system.
Play/Pause (1/;)
Hold switch
Supplied Accessories
Check the packing carton for these accessories.
Program/recall(MEMORY)
For U.S.A.
For Canada
≥1 Pair of stereo earphones:
≥1 Pair of stereo headphones:
SL-SX320 SL-SX313 SL-SX321C
L0BAB0000123
L0BAD0000162
SL-SX321C ONLY
≥1 Car power adaptor:
SH-CDC12PEY
For U.S.A.:
Headphones
SL-SX315
L0BAD0000157
≥
1 Car stereo cassette adaptor:
SHCDM10B1PYK
For Canada:
Earphones
Use numbers indicated when ordering replacements or optional
accessories from your Panasonic dealer.
In U.S.A. contact 1-800-332-5368 or the website (http://www.panasonic.com).
Power Supply
How to Use
Dry cell batteries (not included)
Playback
Adjust the volume with [s, VOL, r].
OPEN
4
(0 - 25) 3
Press [1/;].
1
-
S
XBS
Track number
7
Open the lid and
insert a CD.
OPEN
Elapsed playing
time of track
0:22
LR6, AA, UM–3
∫Fit the battery lid so it is secure and flush with the battery compartment if it
comes loose, otherwise it can scratch your discs.
Release
∫To remove the batteries, lift from the left.
∫Play time About 33 hours
:
Plug in firmly.
2HOLD.
Rechargeable batteries (not included)
Plug type:
3.5 mm (1/8 in.stereo)
≥If rechargeable batteries are to be used, rechargeable batteries manufactured by
Panasonic are recommended.
≥This unit cannot recharge batteries. The battery indicator will not function
correctly when using rechargeable batteries.
(Earphones
for Canada)
∫
The volume returns to 10 when you disconnect the power source.
Pause
Stop
The battery indicator
-
S
XBS
Number
of tracks
This indicator appears when the unit is on.
15
Press.
Press.
-
S
XBS
61:55
Total play
time
7
∫Press again to restart play.
0:22
The unit switches off shortly after the indicator
starts flashing.
∫Press again to turn the unit off.
Search
∫Before playing starts the battery indication may flash although the batteries are
not drained. This is normal.
Skip
Press and hold
during play.
Car adaptor
Press.
The SL-SX321C comes with a car adaptor. (Refer to the separate installation instructions.)
Be sure to obtain the car power adaptor (SH-CDC9) for SL-SX320, SL-SX315 and
SL-SX313 available as an optional accessory.
∫
You can search only within the current
∫
Press [: ] twice to skip to the beginning
of the previous track during play.
track during program, one-track repeat,
or random play modes ( page 4).
3
➪
Other Play Methods
Program Play
Play modes
Each time you press [MODE]
Select the tracks while stopped.
1
RANDOM
Random
RANDOM
Random
repeat
Press to register.
2
One track All track
repeat repeat
-
S
XBS
M
Track number
2
Sequence number
- -
01
No display (canceled)
∫You cannot skip back to other tracks during random play.
Repeat steps 1 and 2 to register up to 20 tracks.
Start play.
3
4
Anti-Skip System
This system reduces the skipping caused by vibration to a minimum.
You can change the anti-skip memory time to improve sound quality.
Each time you press and hold [MODE]
∫To confirm the contents of the program
∫Press [MEMORY] while the disc is playing.
∫To delete the entire program
∫Press [∫].
Changing the sound quality
Each time you press [EQ]
Better sound quality,
10-second anti-skip memory
Normal sound quality,
45-second anti-skip memory
Boosts the bass
Concert hall-like sound
No display (canceled)
∫The effect may differ between different kinds of music.
Caution
Specifications
Play time:
Audio
∫Batteries
≥Do not peel off the covering on batteries and do not use if the covering has been peeled off.
≥Align the poles + and - correctly when inserting the batteries.
≥Do not mix different types of batteries or old and new batteries.
≥Remove the batteries if you do not intend to use the unit for a long time.
≥Do not throw into fire, short-circuit, disassemble, or subject to excessive heat.
≥Do not attempt to recharge dry cell batteries.
≥When carrying batteries in a pocket or bag, ensure no metal objects such as necklaces are
placed together with them. Contact with metal may cause short-circuiting which can cause a
fire.
[When used in hold mode with EQ
No. of channels:
2 (left and right, stereo)
Frequencies response:
20 to 20,000 Hz
(i0 dB to j7 dB)
canceled, at 25 eC (77 eF) on a flat,
stable surface]
2 optional alkaline batteries:
About 33 hours
≥The play time may be less
depending on the operating
conditions.
≥Play time will be considerably
reduced when playing CD-RW.
Dimensions (WaHaD):
135a27.7a135 mm
DA converter:
Headphone output level:
RMS max. 6 mWi6 mW/
16 ≠ (adjustable)
1 bit, MASH
∫CDs
≥Do not use irregularly shaped CDs.
≥Do not use non-specification discs.
Pickup
≥Do not use CDs printed with label printers available on the market.
≥Do not use CDs with labels and stickers that are coming off or with adhesive exuding from
under labels and stickers.
Light source: Semiconductor laser
Wavelength:
General
780 nm
(55/16za11/16za55/16z)
∫Listening
Mass:
206 g (7.3 oz.)
(with batteries)
Power supply:
DC input (via optional AC adaptor):
DC 4.5 V
Operational temperature range:
0 eC–40 eC
160 g (5.6 oz.)
EST. 1924
(without batteries)
Note:
Do not play your headphones or earphones at a high volume. Hearing experts advise against
continuous extended play.
If you experience a ringing in your ears, reduce volume or discontinue use.
Do not use while operating a motorized vehicle. It may create a traffic hazard and is illegal in
many areas.
You should use extreme caution or temporarily discontinue use in potentially hazardous
situations.
Specifications are subject to
change without notice.
(32 eF–104 eF)
Mass and dimensions are
approximate.
Even if your headphones or earphones are the open-air type designed to let you hear outside
sounds, don’t turn up the volume so high that you can’t hear what’s around you.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of
sound. So what sounds “normal” can actually be loud and harmful to your hearing.
Guard against this by setting your equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
≥Start your volume control at a low setting.
≥Slowly increase the sound until you can hear it comfortably and clearly, and without
distortion.
Once you have established a comfortable sound level:
≥Leave it there.
∫Allergies
Discontinue use if you experience discomfort with the earphones or any other parts that directly
contact your skin. Continued use may cause rashes or other allergic reactions.
4
RQT6789
|