Operating Instructions
Portable Stereo CD System
Model No. RX-ES29
RX-ES23
Table of Contents
Supplied Accessories...........................................2
Precautions ..........................................................2
Caution for AC Mains Lead ..................................3
Maintenance.........................................................3
CD Selection ........................................................3
Location of Controls .............................................4
Use of Batteries....................................................6
Power Sources .....................................................6
Memory Batteries.................................................6
The Radio.............................................................7
CDs and MP3.......................................................8
Cassette Tape Play.............................................10
Cassette Tape Recording...................................10
Setting the Clock ................................................12
The Play and Record Timer ...............................12
The Sleep Timer.................................................13
Sound Quality.....................................................14
3-D Sound with the Sound Virtualizer ................14
Troubleshooting..................................................15
Technical Specifications .....................................15
Note:
≥ “EB” on the packaging indicates the United Kingdom.
Before connecting, operating or adjusting this product, please
read these instructions completely. Please keep this manual for
future reference.
[_E_] [EB] [GN]
RQT7912-1B
Caution for AC Mains Lead
1. Open the fuse cover with a screwdriver.
Figure A
Figure B
(For United Kingdom)
(“EB” area code model only)
Fuse cover
For your safety, please read the following text carefully.
This appliance is supplied with a moulded three pin mains plug
for your safety and convenience. A 5-ampere fuse is fitted in
this plug. Should the fuse need to be replaced please ensure
that the replacement fuse has a rating of 5-ampere and that it is
approved by ASTA or BSI to BS1362. Check for the ASTA mark
Ï or the BSI mark Ì on the body of the fuse.
2. Replace the fuse and close or attach the fuse cover.
Figure A
Figure B
Fuse
(5 ampere)
If the plug contains a removable fuse cover you must ensure
that it is refitted when the fuse is replaced. If you lose the fuse
cover the plug must not be used until a replacement cover is
obtained.
Fuse
(5 ampere)
A replacement fuse cover can be purchased from your local
dealer.
Maintenance
If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
CAUTION!
≥ Never use alcohol, paint thinner or benzine to clean this unit.
≥ Before using chemically treated cloth, read the instructions
that comes with the cloth carefully.
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR
THE SOCKET OUTLET IN YOUR HOME THEN THE
FUSE SHOULD BE REMOVED AND THE PLUG CUT
OFF AND DISPOSED OF SAFELY. THERE IS A
DANGER OF SEVERE ELECTRICAL SHOCK IF THE
CUT OFF PLUG IS INSERTED INTO ANY 13-AMPERE
SOCKET.
For a cleaner crisper sound
Clean the heads after every 10 hours of use to assure good
quality playback and recording.
Use a cleaning tape (not included).
If a new plug is to be fitted please observe the wiring code as
stated below.
Cassette tape care
≥ Tapes exceeding 100 minutes are thin and can break or get
caught in the mechanism.
≥ Tape slack can get caught up in the mechanism and should
be taken up before the tape is played.
≥ Endless tapes can get caught up in the deck’s moving parts if
used incorrectly.
If in any doubt please consult a qualified electrician.
IMPORTANT
The wires in this mains lead are coloured in accordance with
the following code:
Blue: Neutral, Brown: Live.
As these colours may not correspond with the coloured
markings identifying the terminals in your plug, proceed as
follows:
The wire which is coloured Blue must be connected to the
terminal which is marked with the letter N or coloured Black or
Blue.
The wire which is coloured Brown must be connected to the
terminal which is marked with the letter L or coloured Brown or
Red.
CD Selection
Choose CDs with this mark: (A).
This unit can play CD-DA (digital audio)
A
format audio CD-R and CD-RW that have
been finalized (a process that enables
CD-R/CD-RW players to play audio CD-R and CD-RW)
upon completion of recording. It may not be able to play
some CD-R or CD-RW due to the condition of the recording.
WARNING: DO NOT CONNECT EITHER WIRE TO THE
EARTH TERMINAL WHICH IS MARKED WITH THE LETTER
E, BY THE EARTH SYMBOL Ó OR COLOURED GREEN OR
GREEN/YELLOW.
Do not
≥ use CDs in irregular shape.
≥ use CDs with labels and stickers that are coming off or with
adhesive exuding from under labels and stickers.
≥ attach scratch-proof covers or any other kind of accessory.
≥ write anything on the CD.
THIS PLUG IS NOT WATERPROOF — KEEP DRY.
Before use
Remove the connector cover.
≥ clean CDs with liquids. (Wipe with a soft, dry cloth.)
≥ use CDs printed with label printers available on the market.
How to replace the fuse
The location of the fuse differ according to the type of AC mains
plug (figures A and B). Confirm the AC mains plug fitted and
follow the instructions below.
Illustrations may differ from actual AC mains plug.
3
RQT7912
7 CD recording mode button (CD REC MODE)....... (l 11)
8 Play timer/record timer button ( PLAY/REC) .... (l 13)
9 Clock/timer button (CLOCK/TIMER) ............... (l 12, 13)
Location of Controls
Main Unit
: CD program/clear, tuner preset button
1 Deck
( MEMORY CLEAR) ........................................... (l 7, 9)
2 Deck eject button (< DECK) .................................(l 10)
• Press [< DECK] to open the deck.
; Speaker
Note:
(The unit comes on.)
• These speakers do not have magnetic shielding.
Do not place them near televisions, personal computers
or other devices easily influenced by magnetism.
Then, load a cassette and close the deck by hand.
3 Record/record pause button (¥/;) ................(l 10, 11)
< Standby/on switch (
)
4 Cassette play button (1TAPE)..............................(l 10)
• Press [1TAPE] to start play.
5 Band button (TUNER BAND) ...................................(l 7)
• Press [TUNER BAND] to select “FM” or “AM”.
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a small
amount of power.
= Sound equalizer button (SOUND EQ)................... (l 14)
6 CD play/pause button (CD 1/;).........................(l 8, 9)
• Press [CD 1/;] to start play.
> Tuning/CD search, Rewind/fast-forward buttons
(REW/–/6, 5/+/FF)................................... (l 7, 8, 10)
Plays to the end of the CD and stops.
• Press [CD 1/;] to pause halfway during play.
Press again to resume play.
Remote Control
When the unit is supplied with AC Power, the button such as 4
function in the same way as the controls on the main unit. To
save power, the unit cannot be turned on from the remote
control when batteries are used.
1 Transmission window
Aim at the sensor, avoiding obstacles, at a maximum range
of 7 meters directly in front of the unit.
2 Sleep timer button (SLEEP)...................................(l 13)
3 Numeric buttons...............................................(l 7, 8, 9)
4 CD/MP3 play mode/FM mode button
(PLAY MODE)..............................................(l 7, 8, 9, 11)
5 Auto scan button (AUTO SCAN)..............................(l 7)
6 Display select button (DISPLAY).....................(l 10, 12)
• Press [DISPLAY] to display the clock on the Display
panel B.
7 Preset channel select/album skip buttons
(C /: ALBUM, ALBUM9/D ).......................(l 7, 8)
8 Tuning/CD skip, search/MP3 track skip/clock, timer
adjust buttons (–/:, 9/+)...................(l 7, 8, 9, 12)
9 MP3 intro play button (INTRO) ................................(l 9)
: Tape counter reset button (C.RESET) ..................(l 10)
• Press [C.RESET] to reset the tape counter.
The counter resets to “000”.
2
<
8
9
:
4
5
6
; Rewind/fast-forward buttons
(6/REW, 5/FF )................................................(l 10)
< Sound virtualizer button (S.VIRTUALIZER)..........(l 14)
3
4
8
6
5
R6, AA, UM-3
(not included)
2
?
A
7
;
:
9
<
=
4
RQT7912
? CD/Tape mode select/stop button
B Display panel
(∫ TAPE/CD) .............................................(l 8, 9, 10, 11)
• Press [∫ TAPE/CD] to stop play.
C CD tray open/close button (< CD) ................... (l 8, 11)
• Press [< CD] to open the tray.
@ Time adjust, Preset channel select/CD track select dial
(The unit comes on.)
Load a CD and press [< CD] to close the tray.
(TIME/PRESET TUNE
TRACK SKIP
).......(
l
7, 8, 9, 11, 12)
D Standby indicator (Í) (RX-ES29)
A Volume control buttons (+, – VOLUME)........(l 7, 8, 10)
• Press [+, – VOLUME] to adjust to the desired volume
for CD, Tuner or Cassette.
When the unit is connected to the AC mains supply, this
indicator lights up in standby mode and goes out when the
unit is turned on.
Standby/on indicator (Í/I) (RX-ES23)
The indicator lights green when the unit is turned on.
When the AC power supply is used, it functions as an AC
connection indicator. (The indicator colour changes to red
when the unit is turned off.)
e.g. CD
E CD tray
F Remote control signal sensor (SENSOR)
7 m
Use
30°
30°
≥ Keep the transmission window and the
unit’s sensor free from dust.
≥ Operation can be affected by strong light
sources, such as direct sunlight, and the
glass doors of cabinets.
Batteries
Insert so the poles (+ and –) match those in the remote
control.
Remove if the remote control is not going to be used for a
long period of time. Store in a cool, dark place.
Replace if the unit does not respond to the remote control
even when held close to the front panel.
PHONES
Do not
To Use Headphones (not included)
≥ put heavy objects on the remote control.
Reduce volume before connection.
≥ take the remote control apart.
Plug type: 3.5 mm stereo
≥ spill liquids onto the remote control.
Note:
≥ Avoid listening for prolonged periods of time to prevent
hearing damage.
5
RQT7912
Use of Batteries
Memory Batteries
≥ If this unit is not used for a long period of time or is used
only from an AC power source, remove all the batteries
to prevent potential damage due to possible battery
leakage.
Memory batteries retain memory (clock/timer/CD/radio
settings) during power supply interruption.
These batteries do not power the unit.
* Memory batteries are not included.
≥ Align the poles (+ and –) correctly when inserting the
batteries.
≥ Do not mix old and new batteries or different types of
batteries.
To replace the batteries (3)
≥ The memory batteries last for about 1 year.
≥ Connect the unit to AC power before replacing the batteries.
≥ Extend the memory battery life by always pressing [
turn the unit off before disconnecting the unit from the AC
power source or replacing the power batteries.
] to
≥ Do not recharge ordinary dry cell batteries.
≥ Do not heat or disassemble the batteries. Keep them away
from flame or water.
≥ Do not keep together with metallic objects such as
necklaces.
To remove the batteries (4)
≥ Do not use rechargeable type batteries.
≥ Do not use batteries if the covering has peeled off.
Lift the negative end of the number 4 battery to remove
batteries.
Mishandling of batteries can damage other items, cause
damage to the unit, and may cause a fire through
short-circuiting or electrolyte leakage.
(1)
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with
any part of your body.
2
AC IN
1
Power Sources
FOR THE UNITED KINGDOM ONLY.
READ THE CAUTION FOR THE AC MAINS LEAD ON
PAGE 3 BEFORE CONNECTION.
(3)
(R6/LR6, AA, UM-3)
2
1
To operate the unit on AC power (1)
3
4
Connect the AC mains lead.
1: Household AC outlet
2: AC mains lead (included)
To use batteries (not included) (2)
Disconnect the AC mains lead from unit to operate on battery
(2)
(R20/LR20, D, UM-1)
power.
4
3
1
2
The remote control cannot turn the unit on when batteries are
used.
6
5
7
8
To remove the batteries [A]
Open the battery cover, insert a finger into the hole in the
bottom of the unit and push the batteries out.
Battery life
[A]
“
” flashes on the display when the batteries are
running down.
Then, the unit turns itself off and displays “U01”.
Replace all the batteries with new ones.
(4)
2
1
4
3
6
RQT7912
REW
Preset tuning
The Radio
Up to 16 stations can be set in the FM and AM band.
Preparation:
≥ When using batteries, press [
≥ Press [TUNER BAND] to select “FM” or “AM”.
[1] Press [REW/–/6] or [5/+/ FF] to tune to the
].
required station.
[2] Press [ MEMORY CLEAR].
Manual tuning
[3] While “
” is flashing
Turn [TIME/PRESET TUNE TRACK SKIP ] to select
the channel and press [ MEMORY CLEAR] or on
remote control, press the numeric buttons to select
channels.
≥ For channels 1 to 9, press the corresponding number.
≥ For channels 10 to 16, press [S10], then the two digits.
[1] Press [REW/–/
6] or [5
/+/FF] to select a station.
To tune automatically
Press and hold [REW/–/6] or [5/+/FF] until the
frequency starts changing rapidly.
≥ Auto tuning may be interrupted when there is excessive
interference.
≥ To cancel auto tuning, press [REW/–/6] or
[5/+/FF] once again.
If “
” goes off during presetting, return to step [1].
[2] Press [+, – VOLUME] to adjust volume.
To select channels
To use auto scan
You can search for a station by listening to all tuned-in stations
for 8 seconds each.
Turn [TIME/PRESET TUNE TRACK SKIP ] to
select the channel or on remote control, press the
numeric buttons to select channels.
[1] Press [AUTO SCAN].
To use preset scan
[2] Press [AUTO SCAN] when you find the desired
station.
Auto scan ends when it reaches the original frequency again.
You can search for a station by listening to all preset channels
for 8 seconds each.
To stop during the process, press [AUTO SCAN].
[1] Press and hold [C /: ALBUM] or [ALBUM 9/
To improve FM sound quality
D ] until “PS” appears on the display.
Press [PLAY MODE] to display “
”.
[2] Press [C /: ALBUM] or [ALBUM 9/D ] when
you find the desired channel.
Preset scan ends after searching through each preset channel
once. To stop during the process, press [C /: ALBUM] or
[ALBUM 9/D ].
Monaural sound is selected and noise reduces when reception
is weak.
Press [PLAY MODE] again to cancel the mode.
≥ To improve reception
FM : Change the length and direction of the antenna.
AM : Change the direction of the unit.
To skip the preset channel,
1 Select the desired station.
2 Press [ MEMORY CLEAR].
FM
AM
3 While “
” is flashing
Turn [TIME/PRESET TUNE TRACK SKIP ] to display
“– –”.
4 Press [ MEMORY CLEAR].
To select the skipped channel,
Press the numeric buttons.
≥ AM reception is briefly interrupted if [< DECK] is pressed.
≥ To improve reception when using the unit in a building or
vehicle, place it near a window.
7
RQT7912
TAPE ⁄ CD
CD
REW
Advanced CD and MP3 Functions
CDs and MP3
To play a disc [CD-DA] [MP3]
Preparation:
Press [∫ TAPE/CD] to switch to CD mode.
Remote control only
[1] Press [< CD] to open the
Direct access play [CD-DA] [MP3]
tray.
≥ Starts play from a selected track.
(The unit comes on.)
≥ Label must face upward
(l right).
≥ Load a CD and press [< CD]
to close the tray.
≥ Press the numeric buttons to select and play your desired
track.
For 2-digits number: press [S10] once, then the 2 digits.
For 3-digits number: press [S10] twice, then the 3 digits.
A
B
[2] Press [CD 1/;] to start play.
Plays to the end of the CD and stops.
When playing MP3, “MP3” is
displayed.
A: Track number
B: Elapsed play time
Repeat play and Random play [CD-DA]
≥ Repeat : plays a track or all tracks repeatedly.
≥ Random : plays each track once in the random order.
e.g. MP3
Press [PLAY MODE] to select the desired mode.
n ,
: (1 track- repeat)
(No display)
: (All-track repeat)
]
#
[3] Press [+, – VOLUME] to adjust volume.
]
===
, n
(===
One touch play (when using AC power)
When a CD is loaded, press [CD 1/;].
≥ Press [CD 1/;] to start play if in the stop mode.
≥ Random can only be selected in the stop mode.
≥ The play mode is also cancelled if the CD tray is opened.
To
Operations
stop play
pause play
skip tracks*
Press [∫ TAPE/CD].
To
Operations
Press [CD 1/;] during play.
Turn [TIME/PRESET TUNE
TRACK SKIP ] clockwise
(forward) or counter-clockwise
(backward). On remote control,
press [–/:] or [9/+].
Press and hold [REW/–/6] or
[5/+/FF] during play.
repeat the desired
track
Press [PLAY MODE] to select
“
”.
repeat programmed
tracks
1 Start program play. (l 9)
2 Press [PLAY MODE] to select
“
”.
Press [PLAY MODE] until
” and “ ” are cleared.
Press [PLAY MODE] to clear
”.
search through tracks
[CD-DA]
cancel repeat play
cancel random play
“
On remote control, press and hold
[–/:] or [9/+] during play.
skip album [MP3] *
Press [REW/–/
On remote control, press
ALBUM] or [ALBUM
6
]
or
[5/+/FF].
“
[C
/:
If cancelled during play, play
continues to the end of the CD.
9
/
D
].
* For skip tracks and skip album,
Press [CD 1/;] to start play if in the stop mode.
Notes: (For Random Play)
≥ Random play cannot be used together with program play.
≥ Search can be done within the current playing tracks.
≥ During play you cannot select tracks with the numeric buttons
and skip to tracks which have already been played.
Note:
≥ Keep this unit away from radios and televisions if interference
occurs.
8
RQT7912
Repeat play and Album play [MP3]
Program play [CD-DA] [MP3]
You can program up to 24 tracks.
You can play (
) or repeat play (
) tracks
only in the selected album.
On the main unit
Preparation:
Press [∫ TAPE/CD] to switch to CD stop mode.
Press [PLAY MODE] before or during playback to
select the desired mode.
[1] Turn [TIME/PRESET TUNE TRACK SKIP ] to
,
select the track.
]
#
#
#
[2] Press [ MEMORY CLEAR].
C: Programmed track
C
D
OFF (no indication)
(====n
D: Play sequence
≥ (
): play all tracks in the selected album one time.
: play all tracks in the selected album repeatedly.
[3] Repeat step [1] and [2] to
≥ (
)
program other tracks.
≥ You can select another album with album skip.
≥ You cannot use random play with MP3.
[4] Press [CD 1/;] to start play.
e.g. MP3
On the remote control
MP3 Intro play
Intro functions allow you to start playing the 1st track of all
album for 10 seconds each in the stop mode.
Preparation:
Press [STOP ∫] to switch to CD stop mode.
[1] Press [PROGRAM/ CLEAR].
“
” appears on the display.
Press [INTRO] to start intro play.
Intro function is cancelled after playing the 1st track of last
album in the disc. To stop during the process, press [INTRO]
or [∫ TAPE/CD].
[2] Press the numeric button(s) to select the desired
track.
For 2-digits number: press [S10] once, then the 2 digits.
For 3-digits number: press [S10] twice, then the 3 digits.
Repeat this step to program other tracks.
This unit can play MP3, a method of compressing audio
without affecting audio quality.
[3] Press [CD 1/;] to start play.
ª When creating MP3 files to play on this unit
Disc format: ISO9660 level 1 and level 2 (except for
extended formats)
The program remains intact even if play is stopped or the unit is
turned off. “Cd-P” for [CD-DA] or “P” for [MP3] appears when play
is stopped to indicate the contents are in the memory.
Title names and album names are not displayable on
this unit.
To
Operations
ª Limitation on MP3
cancel*
Press and hold [ MEMORY
CLEAR] in the CD stop mode
until “CLEAR” is displayed.
On remote control, press and
hold [PROGRAM/ CLEAR].
≥ This unit is compatible with multi-session but if there
are a lot of sessions it takes more time for play to
start. Keep the number of sessions to a minimum to
avoid this.
≥ This unit cannot play files recorded using packet
write.
≥ If a CD-ROM format CD contains MP3 and files other
than MP3, only the MP3 files will be playable.
≥ Depending on how you create MP3 files, they may
not play in the order you numbered them or may not
play at all.
check the program
contents (while
“Cd-P” for [CD-DA] or
“P” for [MP3] is
Turn [TIME/PRESET TUNE
TRACK SKIP ].
On remote control, press
[–/:] or [9/+].
displayed)
* The mode is also cancelled if the CD tray is opened.
Notes:
≥ “FULL” is displayed
If 24 tracks have already been programmed.
MPEG Layer-3 audio decoding technology licensed
from Fraunhofer IIS and Thomson multimedia.
≥ “– –:– –” is displayed [CD-DA]
You can still program and play tracks if the total elapsed play
time of the program exceeds 200 minutes.
9
RQT7912
TAPE ⁄ CD
REW
Volume and sound quality in recording
≥ Recording level is set automatically.
≥ Recordings are unaffected by changes to sound quality.
Cassette Tape Play
[1] Press [< DECK] to open the deck.
To display the tape counter while recording
(The unit comes on.)
Load a cassette and close the
deck by hand.
A: Side to be played back facing
up.
B: Insert the cassette with the
exposed tape facing you.
A
B
Press [DISPLAY].
Each time you press the button in the CD or radio mode:
n ,
Present state
Present time
Tape counter
]
#
#
]
===============n
To reset the tape counter
Press [C.RESET].
[2] Press [1TAPE] to start play.
[3] Press [+, – VOLUME] to adjust volume.
The counter resets to “000”.
To
Operations
Erasure prevention
The illustration shows how to remove the tabs to prevent
recording. To record on the tape again, cover as shown.
stop play
Press [∫ TAPE/CD].
start one touch play*
Press [1TAPE] when a cassette is
loaded.
fast-forward
rewind
Press [5/+/FF]. On remote
control, press [5/FF].
A Side A
B Tab for side “B”
C Tab for side “A”
D Adhesive tape
A
Press [REW/–/6].
On remote control, press
[6/REW].
A
B
C
* when using AC power.
D
To erase recordings
1 Press [< DECK] to open the deck and insert the cassette
with the side to be erased facing up.
Cassette Tape Recording
Before Recording
2 Press [∫ TAPE/CD] to switch to TAPE mode.
3 Press [¥/;].
Your attention is drawn to the fact that recording pre-recorded
tapes or discs or other published or broadcast material may
infringe copyright laws.
Recording CDs
Notes:
Normal recording
≥ Use household AC power or new batteries when recording to
avoid poor recordings caused by the batteries running down.
≥ Televisions can cause interference to recordings made on
this unit if they are too close to each other.
Preparation:
Wind on the leader tape.
[1] Press [< DECK] to open the deck.
[2] Press [∫ TAPE/CD] to switch to CD mode.
Selection of tapes
Use normal position tapes.
High position and metal position tapes can be played, but the
unit will not be able to record or erase correctly.
[3] Press [¥/;] to start recording.
CD play and recording start at the same time.
The cassette stops when the CD finishes.
10
RQT7912
1-REC [CD-DA] [MP3]
Records a selected track from the CD and stops.
To
Operations
stop recording
pause recording
Press [∫ TAPE/CD].
Press [¥/;].
Preparation:
Wind on the tape to where you want to start recording.
continue recording
from another CD on
the same cassette
1 Press [< CD] and replace
the CD.
[1] Press [∫ TAPE/CD] to switch to CD mode.
[2] Press [CD REC MODE] to display “1-REC”.
2 Press [¥/;].
Press again to resume
recording.
[3] Turn [TIME/PRESET TUNE TRACK SKIP ] to
select the track you want to record.
[4] Press [¥/;] to start recording.
record selected tracks
skip unwanted tracks
1 Do step [1] and [2], then
program the tracks. (l 9)
CD play and recording start at the same time.
2 Press [¥/;].
To
Operations
1 Press [¥/;] to pause
recording. (The CD also
pauses.)
stop recording
Press [∫ TAPE/CD].
(The CD also stops.)
continue recording
from another CD
1 Press [< CD] and replace the
CD.
2 Turn [TIME/PRESET TUNE
TRACK SKIP ] so the
next track you want to record is
displayed.
2 Do steps [3] and [4].
record a track in play
1 Press [CD REC MODE] to
display “1-REC”.
3 Press [¥/;] to resume
2 Press [¥/;].
recording.
Recording starts from the
beginning of the track and stops
when the track finishes.
ALL-REC [CD-DA]
Records the whole CD or selected tracks. When the tape
finishes before CD, recording and CD pauses for you to resume
recording on the opposite side.
Note:
≥ Recording and CD will stop when the tape reaches its end,
even if the track has not finished.
[1] Press [∫ TAPE/CD] to switch to CD mode.
[2] Press [CD REC MODE] to display “ALL-REC”.
Each time you press the button:
n ,
Recording the Radio
Preparation:
To record from the beginning of the tape;
Wind on the leader tape.
To record from part or half way through the tape;
Wind on the tape to where you want to start recording.
ALL-REC
1-REC
OFF
]
#
#
]
==========n
The display shows the tape length needed.
“C – – – –” indicates the tape needed exceeds 100 minutes.
You can still record, but some tracks may not be recorded if
the tape is not long enough.
[1] Load a cassette with the side for recording
facing up.
[3] Press [< DECK] to open the deck and load a
cassette with the side for recording facing up.
[2] Tune to the station.
[4] Press [¥/;] to start recording.
The unit rewinds the tape, records 10 seconds of silence,
and then starts recording.
[3] Press [¥/;] to start recording.
To
Operations
stop recording
pause recording
Press [∫ TAPE/CD].
To stop recording, press [∫ TAPE/CD]. The CD also stops.
Press [¥/;].
Press again to resume recording.
If a track is interrupted at the end of the side facing up,
Recording and CD pauses.
To reduce noise when recording AM (Beat Proof function)
To
Operations
Remote control only
record the track again
on the opposite side
1 Press [< DECK], flip the
cassette, and insert it.
1 Press [PLAY MODE] while recording.
Each time you press the button:
bP1 ,-. bP2
2 Press [¥/;]*.
* The unit records 10 seconds of silence, and resumes
recording from the beginning of the cut-off track.
Choose the setting with the least noise.
Note:
≥ Random play and repeat play cannot be used with
“ALL-REC”.
11
RQT7912
TAPE ⁄ CD
Setting the Clock
The Play and Record Timer
You can set the timer to come on at a certain time to wake you
up (play timer) or to record a radio station (record timer).
This is a 24-hour clock.
[1] Press [
] to turn the unit on.
Preparations:
Turn the unit on and set the clock.
[2] Press [CLOCK/TIMER] to select “CLOCK”.
Each time you press the button:
For play timer, prepare the music source (tape/CD/radio) for
listening, and set the volume.
For record timer, check the cassette’s erasure prevention tab
(l 10) and load the cassette with the side for recording facing
up. Tune to the radio station (l 7), and set the volume.
n ,
Original display
ON
PLAY
#
OFF
PLAY
REC
CLOCK
#
]
]
OFF
REC
ON
#
(n
#
[3] Within 10 seconds
Turn [TIME/PRESET TUNE TRACK SKIP ] to
set the time or on remote control, press [–/:]
or [9/+].
To set the start and finish times
[1] Press [CLOCK/TIMER] to select the desired timer
function.
[4] Press [CLOCK/TIMER] to start the clock.
ON
ON
PLAY: to set the play timer
REC : to set the record timer
The original display is restored shortly after.
Proceed to step [2] before these indicators stop flashing
(about 10 seconds).
Note:
≥ The clock may lose or gain some time over a period.
Readjust if necessary.
[2] Turn [TIME/PRESET TUNE TRACK SKIP ] to
set the start time and then press [CLOCK/TIMER].
To display the clock
Remote control only
Press [DISPLAY].
[3] Turn [TIME/PRESET TUNE TRACK SKIP ] to
set the finish time and then press [CLOCK/
TIMER].
The start and finish times are now set.
12
RQT7912
To turn the timer on
[4] Press [ PLAY/REC] to display the timer
indicator.
The Sleep Timer
Remote control only
Each time you press the button:
You can set the unit to turn off after certain time. (e.g. when you
want to fall asleep while listening to music.)
n ,
PLAY
REC
No display (OFF)
]
#
#
]
Press [SLEEP] to select the time (minutes).
Each time you press the button:
================n
PLAY: to turn the play timer on
n ,
SLEEP 30
SLEEP 60
SLEEP 90
]
n
#
#
REC: to turn the record timer on
(The indicator does not appear if the start and finish times
have not been set.)
]
SLEEP OFF
SLEEP 120
#
===
,===
“E” appears if the clock has not been set.
To
cancel
Operations
[5] Press [
] to turn the unit off.
The unit must be off for timer to operate.
The record timer comes on about 30 seconds earlier than
the set time.
Press [SLEEP] to select
“SLEEP OFF”.
check the remaining
time
Press [SLEEP] once.
The remaining time is shown for
about 5 seconds.
To
Operations
Press [ PLAY/REC]. (l A)
Press [CLOCK/TIMER]. (l B)
cancel the timer
change the setting
Press [SLEEP] to select the new
time.
check the settings*
A: When the unit is on to clear the timer indicators from
the display. (The timer comes on at the set time
everyday if the timer is on.)
Notes:
≥ You can use sleep timer in combination with play and record
timer.
B: The settings are shown in the following order:
Start time > Finish time > Music source > Volume
> Original display
≥ Make sure the unit is off before the play and record timer’s
start time.
≥ Sleep-off time shall have higher priority than timer-off time.
* While the unit is in standby mode and connected to the
household mains socket.
To change the settings (when unit is on)
To
Operations
change the times
Do steps [1], [2], [3] and [5].
change the source or
volume
1 Press [ PLAY/REC] to clear
the timer indicator.
2 Make changes to the source or
volume.
3 Do steps [4] and [5].
You can enjoy your desired source after you have set the
timer.
Turn the unit off before the timer’s start time.
Note:
≥ The play and record timers cannot be used together.
13
RQT7912
SOUND EQ
Sound Quality
You can choose one of four types of sound quality.
3-D Sound
with the Sound Virtualizer
1 Heavy: Adds punch to rock
2 Clear: Clarifies higher sounds
3 Soft: For background music
4 Vocal: Adds gloss to vocals
Remote control only
You can create a three-dimensional sound field when listening
to stereo sound.
Press [S.VIRTUALIZER].
Press again to cancel.
Press [SOUND EQ] to select a setting.
Each time you press the button:
n ,
: ON
OFF
=====#
]
]
1 Heavy > 2 Clear
==========n
e
l
l
l
l
v
1
2
3
4
Notes:
3 Soft
≥ This feature does not affect recordings.
≥ The actual effect depends on the source played.
v
4 Vocal
v
EQ-OFF (cancelled)
Note:
≥ Changes to sound
quality do not affect
recordings.
14
RQT7912
Troubleshooting
Before requesting for service, make the following checks. If you cannot fix the unit as described below, or if something not listed
here occurs, refer to the enclosed directory to locate an Authorized Service Center convenient to you or contact your dealer.
Reference pages are shown as an example (l 3).
Common problems
“E” is displayed.
Indicates incorrect operation. Read the instructions.
“U01” is displayed.
Replace the batteries or use household AC power. (l 6)
Power batteries have not been inserted. Insert them or use household AC power.
(l 6)
“U02” is displayed.
CD
CD will not play or CD display is
incorrect.
Place the CD with label facing up. (l 8)
Wait for 1 hour for condensation to dry and try again.
Certain sections are not played
properly.
Clean the CD. (l 3)
Replace the CD if it is scratched, warped, or nonstandard.
Cassette deck
Recording is not possible.
Poor sound quality.
If the cassette’s tabs have removed, cover the holes with adhesive tape. (l 10)
Clean the heads. (l 3)
Radio
Interference may be caused by other equipment or the use of its remote control.
Turn the other equipment off or keep this unit away from them.
A lot of noise or tuning difficulty.
Remote Control
Check to ensure the batteries are inserted correctly. (l 4)
Replace the batteries if they are worn. (l 4)
The remote control does not work.
The unit cannot be turned on from
the remote control.
Turn the unit on from the main unit if you are using batteries to power the unit.
(l 4, 6)
Technical Specifications
Radio
Frequency range
FM
AM
General
Speakers
(RX-ES29) 8 cm 5.4 ™ k 2
(RX-ES23) 8 cm 2.7 ™ k 2
87.50s108.00 MHz (50 kHz steps)
522s1629 kHz (9 kHz steps)
Jacks
Output
CD player
Sampling frequency
Decoding
Beam source
Bølgelengde
Laserstyrke
No. of channels
Wow and flutter
D/A converter
PHONES: 3.5 mm stereo (16s32 ™)
44.1 kHz
16 bit linear
Semiconductor laser (wavelength 780 nm)
780 nm
Power requirement
AC
230s240 V, 50 Hz
Power consumption: (RX-ES29) 30 W
(RX-ES23) 23 W
Ingen farlig stråling sendes ut
2-channel, stereo
Battery
12 V [Eight R20/LR20 (D, UM-1) batteries]
≥ Do not use rechargeable type batteries.
Below measurable limit
MASH (1 bit DAC)
Memory back-up for computer/clock
6 V [Four R6/LR6 (AA, UM-3) batteries]
Tape recorder
Track system
Monitor system
Recording system
Erasing system
Frequency range
Normal position
≥ Do not use rechargeable type batteries.
529 mm (W) k 144 mm (H) k 276 mm (D)
(RX-ES29) 4.4 kg without batteries
Stereo
Variable sound monitor
AC bias
Dimensions
Mass
(RX-ES23) 3.9 kg without batteries
Multi Pole magnet
Power consumption in standby mode (RX-ES29) 2.7 W
50s14000 Hz
(RX-ES23) 2.3 W
Notes:
≥ Specifications are subject to change without notice.
≥ Mass and dimensions are approximate.
15
RQT7912
Utstyret bør plasseres i nærheten av AC-stikkontakten,
og støpslet må være lett tilgjengelig hvis det skulle
oppstå problemer.
CAUTION!
≥ DO NOT INSTALL OR PLACE THIS UNIT IN A
BOOKCASE, BUILT-IN CABINET OR IN ANOTHER
CONFINED SPACE. ENSURE THE UNIT IS WELL
VENTILATED. TO PREVENT RISK OF ELECTRIC
SHOCK OR FIRE HAZARD DUE TO OVERHEATING,
ENSURE THAT CURTAINS AND ANY OTHER
MATERIALS DO NOT OBSTRUCT THE VENTILATION
VENTS.
≥ DO NOT OBSTRUCT THE UNIT’S VENTILATION
OPENINGS WITH NEWSPAPERS, TABLECLOTHS,
CURTAINS, AND SIMILAR ITEMS.
≥ DO NOT PLACE SOURCES OF NAKED FLAMES,
SUCH AS LIGHTED CANDLES, ON THE UNIT.
≥ DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY
FRIENDLY MANNER.
SUOMI
VAROITUS!
≥ ÄLÄ ASENNA TAI LAITA TÄTÄ LAITETTA
KABINETTITYYPPISEEN KIRJAKAAPPIIN TAI
MUUHUN SULJETTUUN TILAAN, JOTTA TUULETUS
ONNISTUISI. VARMISTA, ETTÄ VERHO TAI MIKÄÄN
MUU MATERIAALI EI HUONONNA TUULETUSTA,
JOTTA VÄLTETTÄISIIN YLIKUUMENEMISESTA
JOHTUVA SÄHKÖISKU- TAI TULIPALOVAARA.
≥ ÄLÄ PEITÄ LAITTEEN TUULETUSAUKKOJA
SANOMALEHDELLÄ, PÖYTÄLIINALLA, VERHOLLA
TAI MUULLA VASTAAVALLA ESINEELLÄ.
≥ ÄLÄ ASETA PALAVAA KYNTTILÄÄ TAI MUUTA
AVOTULEN LÄHDETTÄ LAITTEEN PÄÄLLE.
≥ HÄVITÄ PARISTOT LUONTOA
The socket outlet shall be installed near the equipment
and easily accessible or the mains plug or an appliance
coupler shall remain readily operable.
VAHINGOITTAMATTOMALLA TAVALLA.
NORSK
VAROITUS!
ADVARSEL!
LAITTEEN KÄYTTÄMINEN MUULLA KUIN TÄSSÄ
KÄYTTÖOHJEESSA MAINITULLA TAVALLA SAATTAA
ALTISTAA KÄYTTÄJÄN TURVALLISUUSLUOKAN 1
YLITTÄVÄLLE NÄKYMÄTTÖMÄLLE
≥ APPARATET MÅ IKKE PLASSERES I EN BOKHYLLE,
ET INNEBYGGET KABINETT ELLER ET ANNET
LUKKET STED HVOR VENTILASJONSFORHOLDENE
ER UTILSTREKKELIGE. SØRG FOR AT GARDINER
ELLER LIGNENDE IKKE FORVERRER
LASERSÄTEILYLLE.
VENTILASJONSFORHOLDENE, SÅ RISIKO FOR
ELEKTRISK SJOKK ELLER BRANN FORÅRSAKET AV
OVERHETING UNNGÅS.
≥ APPARATETS VENTILASJONSÅPNINGER MÅ IKKE
DEKKES TIL MED AVISER, BORDDUKER, GARDINER
OG LIGNENDE.
≥ PLASSER IKKE ÅPEN ILD, SLIK SOM LEVENDE LYS,
OPPÅ APPARATET.
≥ BRUKTE BATTERIER MÅ KASSERES UTEN FARE
FOR MILJØET.
VAROITUS:
TULIPALO-, SÄHKÖISKUVAARAN TAI TUOTETTA
KOHTAAVAN MUUN VAHINGON VÄHENTÄMISEKSI EI
LAITETTA SAA ALTISTAA SATEELLE, KOSTEUDELLE,
VESIPISAROILLE TAI ROISKEELLE, EIKÄ NESTETTÄ
SISÄLTÄVIÄ ESINEITÄ, KUTEN ESIMERKIKSI
MALJAKOITA, SAA ASETTAA LAITTEEN PÄÄLLE.
Laite tulee asettaa lähelle verkkopistorasiaa ja
pistokkeen täytyy olla sellaisessa asennossa, että
siihen on helppo tarttua ongelman sattuessa.
ADVARSEL!
DETTE PRODUKTET ANVENDER EN LASER.
BETJENING AV KONTROLLER, JUSTERINGER ELLER
ANDRE INNGREP ENN DE SOM ER BESKREVET I
DENNE BRUKSANVISNING, KAN FØRE TIL FARLIG
BESTRÅLING.
DEKSLER MÅ IKKE ÅPNES, OG FORSØK ALDRI Å
REPARERE APPARATET PÅ EGENHÅND. ALT
SERVICE OG REPARASJONSARBEID MÅ UTFØRES AV
KVALIFISERT PERSONELL.
ADVARSEL:
FOR Å REDUSERE FAREN FOR BRANN, ELEKTRISK
STØT ELLER SKADER PÅ PRODUKTET, MÅ DETTE
APPARATET IKKE UTSETTES FOR REGN, FUKTIGHET,
VANNDRÅPER ELLER VANNSPRUT. DET MÅ HELLER
IKKE PLASSERES GJENSTANDER FYLT MED VANN,
SLIK SOM BLOMSTERVASER, OPPÅ APPARATET.
(En)
Matsushita Electric Industrial Co., Ltd.
RQT7912-1B
F1204Ks0
|