Panasonic KXL CB30AU User Manual

Portable DVD-ROM & CD-R/RW Drive  
Operating Instructions  
Model No.  
KXL-CB30AU  
Thank you for purchasing the Panasonic Portable DVD-ROM & CD-R/RW Drive  
KXL-CB30AU.  
Before attempting to connect, operate or adjust the controls, please read these  
instructions completely.  
Please keep this manual for future use.  
Features  
*1  
I
I
I
I
I
I
Maximum 24X CD-R writing and 16X CD-RW writing performance  
*2  
Compatible with USB2.0 interface  
Buffer Under Run protection  
Supports DVD-RAM/-R/-RW playback  
Includes B.H.A Writing Software  
(
)
incorporated  
*3  
*4  
Includes InterVideo DVD-Video Playback Software  
*1  
*2  
16X writing may not be supported except recommended Discs.  
The performance of this drive connected via a USB hub is not guaranteed.  
For USB1.1 interface, writing and reading speeds are about 8X at maximum.  
Only UDF formatted DVD-RAMs that are removable from cartridges or non-cartridge type can be  
used with this drive.  
*3  
*4  
When using USB1.1, images and sounds may be interrupted during DVD-Video playback.  
The full title of Windows 98SEis Microsoft® Windows® 98 Second Edition operating system.  
The full title of Windows 2000is Microsoft® Windows® 2000 Professional operating system.  
The full title of Windows Meis Microsoft® Windows® Millennium Edition operating system.  
The full title of Windows XPis Microsoft® Windows® XP Professional operating system or Microsoft®  
Windows® XP Home Edition operating system.  
3
Accessories  
Make sure that the following accessories are included with the drive.  
If anything is missing, contact your dealer immediately.  
AC adaptor  
(Made in China)  
(KX-WZ712)  
USB cable  
(Made in Philippines)  
Operating Instructions  
Setup Guide  
AC cord  
CD-ROM  
ABs Recorder GOLD5 BASIC  
ABs CLiP 5  
AWinDVD 4  
ADriver Software  
Serial No. on case  
* With a disc case.  
The illustrations above may differ in detail from the accessories included with this  
product.  
(The contents of the accessories may also be changed without notice.)  
Please read End-user License Agreement (p.64-65) before opening the  
accessories.  
B Discs for recording are not supplied. Please purchase them separately.  
4
Table of Contents  
Overview ....................................................................................................2  
Features .....................................................................................................3  
Accessories................................................................................................4  
Important Safety Notice..............................................................................6  
LASER Product ..........................................................................................7  
Important Safety Instrucutions....................................................................8  
Operating Precautions..............................................................................10  
Compatible Discs .....................................................................................12  
Parts and Functions .................................................................................16  
Introduction  
System Requirements..............................................................................18  
Setup Your Computer...............................................................................19  
ASupplied Software ..............................................................................19  
AOperating Procedures ........................................................................20  
AConfirmation of Windows Version ......................................................21  
AConfirmation of USB Type..................................................................22  
AInstalling USB Driver ..........................................................................24  
AUsing DVD-RAMs in UDF 2.0 Format ................................................26  
AInstalling UDF Reader ........................................................................27  
AChecking Setup ..................................................................................29  
Connecting to Computer ..........................................................................30  
AConnecting USB Cable.......................................................................30  
ADisconnecting USB Cable ..................................................................31  
Preparation  
Inserting / Removing a Disc .....................................................................33  
AInserting a Disc...................................................................................33  
ARemoving a Disc ................................................................................34  
AWhen You Cannot Remove the Disc..................................................35  
Using DVD-RAMs.....................................................................................36  
Using Other Discs ....................................................................................37  
Before Installing Applications ...................................................................38  
Installing Video Playback Software ..........................................................39  
Installing Writing Software........................................................................42  
Operation  
How to Make the CB30A Driver Installation Floppy Disk .........................45  
Maintenance.............................................................................................46  
Troubleshooting........................................................................................47  
FAQ..........................................................................................................53  
Recommendations ...................................................................................61  
Specifications ...........................................................................................62  
End-user License Agreement...................................................................64  
Glossary ...................................................................................................66  
Index.........................................................................................................69  
Limited Warranty ......................................................................................71  
Product Information..................................................................................74  
For Your  
Reference  
5
Important Safety Notice  
For U.S.A.  
Federal Communications Commission Radio Frequency Interference Statement  
Note:  
This equipment has been tested and found to comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a residential installation. This  
equipment generates, uses and can radiate radio frequency energy and, if not installed  
and used in accordance with the instructions, may cause harmful interference to radio  
communications.  
However, there is no guarantee that interference will not occur in a particular installation. If  
this equipment does cause harmful interference to radio or television reception, which can  
be determined by turning the equipment off and on, the user is encouraged to try to correct  
the interference by one or more of the following measures:  
B Reorient or relocate the receiving antenna.  
B Increase the separation between the equipment and receiver.  
B Connect the equipment into an outlet on a circuit different from that to which the  
receiver is connected.  
B Consult the Panasonic Service Center or an experienced radio / TV technician for help.  
Warning:  
To assure continued compliance, use only shielded interface cables when connecting to a  
computer or peripheral. Also, any changes or modifications not expressly approved by the  
party responsible for compliance could void the users authority to operate this equipment.  
This device complies with Part 15 of the FCC Rules, Operation is subject to the following  
two conditions:  
(1) This device may not cause harmful interference, and  
(2) This device must accept any interference received, including interference that may  
cause undesired operation.  
Trade Name  
Model Name  
: Panasonic  
: KXL-CB30AU  
Responsible Party : Panasonic Digital Document Company  
Unit of Matsushita Electric Corporation of America  
Address  
: Two Panasonic Way  
Secaucus, New Jersey 07094  
: 1 - 800 PANASYS (726 - 2797)  
Telephone No.  
For Canada  
Notification:  
This Class B digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.  
6
LASER Product  
Class 1 LASER Product  
This drive is classified as a Class 1 LASER product and there is no hazardous  
LASER radiation with the safety protection.  
CAUTION  
Use of optical instruments with this product will increase eye hazard.  
Use of control, adjustment or performance of procedures other than those  
specified herein may result in hazardous radiation exposure.  
As the laser beam in this drive is harmful to the eyes, do not open covers and do  
not repair yourself. Refer servicing to qualified personnel only.  
LASER Properties of the Drive  
Laser Class  
Wavelength  
Class 1 (HHS and IEC 825-I)  
for CD  
780 - 789 nm  
655 - 668 nm  
for DVD  
The CLASS 1 LASER PRODUCT label is located at the bottom of the drive.  
7
Important Safety Instructions  
B To avoid damaging Power cord, power plug and  
AC adaptor, do not do any of the following:  
Scratching / Modifying / Putting them near heater / Bending  
/ Twisting / Pulling / Placing heavy objects on them /  
Tying them in a bundle / Covering them with a cloth.  
Using damaged Power cord, power plug and AC adaptor  
may cause electric shock, short and fire.  
For cord and plug repairing, contact a service office.  
B Use only AC 120V. Make sure AC outlet or cords  
for AC adaptor do not exceed the limit of their  
electrical ratings.  
Fire caused by overheating may result from connecting too  
many cords to the same outlet.  
B Periodically remove dust from prongs of AC  
cord.  
Accumulated dust on the plug may cause defective  
installation and result in fire.  
Wipe power plug with a dry cloth.  
Remove power plug when drive is not in use for a  
prolonged period.  
B Fully insert prongs of AC cord into AC outlet.  
If the prongs are not fully inserted, there is a danger of  
electric shock or overheating that may cause fire.  
Do not use damaged plug or worn outlet.  
B Do not plug or remove AC cord with wet hands.  
It may cause electric shock.  
B Never attempt to disassemble or repair drive  
yourself.  
This is a class 1 LASER product.  
Laser light may cause damage to your eyesight.  
All internal inspection and repair should be done by  
qualified service personnel.  
CLASS 1 LASER PRODUCT  
LASER KLASSE  
1
8
Important Safety Instructions  
B Unplug AC cord from outlet if any  
of the following happen:  
It is damaged.  
Foreign objects get into it.  
It emits smoke or odor.  
It becomes excessively hot.  
Because fire or electric shock may be caused  
by continued use. If any of the above occur,  
immediately turn off the Power Switch and  
unplug AC cord from outlet.  
B Do not touch metallic parts of drive,  
AC adaptor or AC cord when there is lightning.  
It may cause electric shock.  
B Do not move drive when AC cord is connected  
to AC outlet.  
AC cord may be damaged and it may cause fire or electric  
shock.  
If AC cord is damaged, unplug AC cord from outlet  
immediately, then contact a service office.  
B Disconnect AC cord from AC outlet by pulling on  
the plug.  
Pulling AC cord may cause damage to the cord itself, and  
then it may cause fire or electric shock.  
B Avoid direct contact for a prolonged period.  
Direct contact with a high-temperature part of AC adaptor may  
cause low-temperature burns.  
Low-temperature Burns:  
Low-temperature burns may be caused by prolonged contact of  
the same part of the skin with an object that has an even slightly  
higher temperature than body temperature.  
B Do not move or lift drive while disc inside is  
rotating.  
If the disc becomes detached, it may be damaged.  
B Do not use cracked or repaired discs.  
Disc may break and cause injury.  
9
Operating Precautions  
Location  
I Do not place drive where it will be exposed to direct sunlight or where the  
temperature will become excessively high.  
It may cause deformations, discoloration or breakdown.  
Usage  
I Do not use other USB cables  
except for the supplied one.  
It may cause a drive or computer  
breakdown.  
I Do not bring magnets or magnetic  
objects near drive. (Operation may  
become unstable due to the effects  
of the magnetism.)  
I Do not place drive where it is  
extremely dusty or filled with  
greasy fumes, or it is humid, e.g.  
near a humidifier or in the kitchen.  
It may cause a breakdown.  
I Do not insert metal objects into  
drive.  
It will cause a breakdown.  
I Do not touch lens.  
It will cause an audio skip or failure  
of data reading and writing.  
I If drive is used near a radio or TV  
set and it causes interference with  
reception, place drive at least 6'6"  
(2 meters) away from the radio or  
TV set, and if sharing AC outlet  
with them, use another AC outlet.  
I Do not use drive when  
condensation has formed in or on  
it. (When drive is suddenly taken  
from a cold place to a warm place,  
condensation will form, causing  
drive to malfunction. In such cases,  
remove the disc and leave drive for  
about an hour before use.)  
Transport  
I When you carry the drive, remove the disc, close the Disc Cover and  
remove the cable.  
I Do not drop the drive or bump it into objects when moving or transporting it.  
AC Adaptor  
I Use only AC adaptor KX-WZ712 and Power cord supplied with drive.  
Using other AC adaptors and Power cords may cause a breakdown.  
10  
Operating Precautions  
General Information  
Matsushita Electric Industrial Co., Ltd. herewith declares that it will not be  
liable for any loss of data or any other damage, whether direct or indirect,  
caused by the operation or malfunctioning of this product. Back up important  
data to protect it from possible loss.  
For Copy Control CD (copy protected CD)  
I When using CDs that do not conform to the CD-DA (Compact Disc Digital  
Audio) standards, such as Copy Control CDs, the performance and sound  
quality is not guaranteed.  
I If the drive can play back or read CDs that conform to the CD standards  
without a problem, but cannot play back or read a special disc like the Copy  
Control CD above, check the disc, package, pamphlet etc. and contact the  
disc manufacturer.  
Observance of copyright  
Enjoy your image and audio recordings and other data for personal use.  
Other unauthorized use is prohibited under copyright law.  
Discs Recorded with Panasonic DVD Video Recorder  
BTo play back DVD-RAMs recorded with DVD video recorders, UDF Reader  
compatible with UDF2.0 format is required.  
For Windows OSs other than Windows XP, install the supplied UDF Reader.  
(For Windows XP, UDF installation is not required.)  
BTo play back a DVD-R recorded with a DVD video recorder, it is necessary  
to finalize the DVD-R using the DVD video recorder used for recording.  
11  
Compatible Discs  
The discs bearing the logos shown below can be used with this drive.  
For Reading  
For Reading / Writing  
*1  
*3  
DVD-Video  
Video CD  
CD-R  
*2  
DVD-RAM  
CD-EXTRA  
CD-DA  
DVD-R  
CD-RW  
*3  
DVD-RW  
DVD-ROM  
CD TEXT  
CD-ROM  
*4  
Photo CD  
CD-ROM XA  
* Data may not be read properly depending on disc conditions such as recording quality,  
scratches, dirt, deformation or copy protection.  
*1  
ALL  
1
DVD-Videos with Region Code  
or  
can be played back. For DVD-Videos with  
other Region Codes, it is necessary to change the Region Code settings.  
Region Code can be reset up to 4 times. After the Region Code has been reset for the  
fourth time, the setting is fixed and cannot be changed.  
Use only non-cartridge type discs, and TYPE 2 and TYPE 4 discs removed from  
cartridges.  
*2  
*3  
*4  
It can be played back using the supplied applications.  
Dedicated software for Photo CDs is required separately.  
12  
Compatible Discs  
Handling Discs  
Data may not be written correctly or data that has already been written may be damaged if  
these discs are not handled correctly. Incorrect handling may also damage your drive.  
Read carefully these instructions and the instructions that came with the disc you are using.  
Handling  
I Avoid direct sunlight, high  
temperature and humidity.  
Disc may be damaged or become  
deformed, and data cannot be written or  
read properly.  
I Do not write or adhere labels on  
the disc except for on the label  
side.  
Fingerprints, dirt, dust and  
scratches on the recording  
surface of discs can affect  
reading and writing.  
I Do not touch the recording  
surface.  
BWrite on the label side only with a soft,  
oil-based felt pen. Do not use ballpoint  
pens or other hard writing implements.  
I Do not use benzine, paint  
thinners or other solvents.  
Disc may be damaged or become  
deformed, and data cannot be written or  
read properly.  
Fingerprints, dirt, dust and scratches on  
the recording surface of discs can affect  
the reading and writing of data.  
I Do not scrub the recording  
surface with a dry cloth.  
Disc may be damaged or become  
deformed, and data cannot be written or  
read properly.  
I Do not throw or bend disc.  
Disc may be damaged or become  
deformed, and data cannot be written or  
read properly.  
DVD-RAM variations  
DVD-RAM is a removable disc developed as a DVD to which data can be  
written, aiming at reading and writing large computer data.  
There are the following types of DVD-RAMs.  
B TYPE1  
The disc inside cannot be removed.  
B TYPE2  
A single sideddisc. The disc inside can be removed.  
B TYPE4  
A double sideddisc. The disc inside can be removed.  
B Non-cartridge type  
This drive is only compatible with non-cartridge type DVD-RAMs.  
To use TYPE2 or TYPE4 DVD-RAMs, remove the discs from cartridges.  
13  
Compatible Discs  
Using TYPE2 / TYPE4 DVD-RAMs  
Removing a Disc from a Cartridge  
To remove a disc from a cartridge, follow the procedure shown below.  
[The discs illustrated below are Panasonic 12 cm DVD-RAMs. When using  
other discs, refer to instructions supplied with discs.]  
To remove a disc from TYPE2 cartridge  
1
2
3
Break and remove the locking pin  
using a pointed object such as a  
ballpoint pen.  
Open the cover of the cartridge  
pressing the hole located on the left  
side with a pointed object.  
Remove the disc horizontally, taking  
care not to soil or damage the disc.  
M
A
-R  
D
V
D
Label side  
When storing a disc  
B
Match the label side of the disc with the label side of the cartridge and insert fully.  
BCheck the setting of the write-protect switch after closing the cover.  
Cautions  
BDo not try to open the cover by force.  
BDo not insert discs other than DVD-RAM into empty cartridges.  
BTake care that the discs recording surface is not contaminated with  
fingerprints, dirt, dust, scratches, or liquids. Do not write on the recording  
surface.  
BWrite on the label side of the disc only with a soft, oil-based felt pen. Do not  
use ballpoint pens or other hard writing implements.  
BDo not attach other labels or protective covers. Do not use coatings.  
BClean the disc with the special DVD-RAM/PD disc cleaner*. Do not use  
benzine, thinners, anti-static fluids, or any other solvent.  
BReturn discs to their cartridges when you are not using them.  
BDo not drop or bend discs.  
*Use LF-K200DCA1 for cleaning.  
14  
Compatible Discs  
To remove a disc from TYPE4 cartridge  
1
2
Break and remove the two locking  
pins using a pointed object such as  
a ballpoint pen.  
Open the cover of the cartridge  
pressing the hole located on the left  
side with a pointed object.  
3
Remove the disc horizontally, taking  
care not to soil or damage the disc.  
A
SIDE  
When storing a disc  
BMatch the side A of the disc with the side A of the cartridge and insert fully.  
BCheck the setting of the write-protect switch after closing the cover.  
Cautions  
BDo not try to open the cover by force.  
BDo not insert discs other than DVD-RAM into empty cartridges.  
BTake care that the discs recording surface is not contaminated with  
fingerprints, dirt, dust, scratches, or liquids. Do not write on the recording  
surface.  
BDo not attach other labels or protective covers. Do not use coatings.  
BClean the disc with the special DVD-RAM/PD disc cleaner*. Do not use  
benzine, thinners, anti-static fluids, or any other solvent.  
BReturn discs to their cartridges when you are not using them.  
BDo not drop or bend discs.  
*Use LF-K200DCA1 for cleaning.  
15  
Parts and Functions  
Front/Top/Right View  
Disc Cover  
POWER/BUSY Indicator (green)  
(see p.33)  
B lit : When the drive is on.  
B blinks : When data is being  
read from media.  
WRITE Indicator (amber)  
B lit : When data is being written  
to media.  
*While SmoothLink function is  
working, WRITE Indicator blinks or  
goes out occasionally.  
Open Button [OPEN]  
(see p.33)  
Power Switch  
[POWER  
]
Lens Protection Sheet  
Cautions:  
BBe sure to remove the Lens Protection Sheet  
before use.  
BTo open the Disc Cover, see p.35.  
16  
Parts and Functions  
Rear/Bottom View  
Lock Release Lever  
(see p.35)  
Mode Switches  
Initial setting:  
Set all Mode Switches to OFF  
when the drive is in use.  
DC Input Terminal  
[DC IN 6 V  
]
USB Connector [I/F]  
(see p.30)  
17  
System Requirements  
*1  
Computers  
BIBM PC / AT compatible computer  
BWindows® XP  
BWindows Me  
BWindows 2000  
BWindows 98SE  
Windows OSs  
I When Visual Application (Video Playback Software) is used :  
Pentium® 400 MHz or higher  
CPU  
(Pentium® 700 MHz or higher recommended)  
64 MB or more (128 MB or more recommended)  
Memory  
(For Windows XP, 128 MB or more recommended)  
Hard disk  
space  
20 MB or more  
*2  
1024 x 768 pixels or higher 24-bit color  
Display  
Direct X compatible (Direct X 8.1 or later)  
I When Data Applications (Writing Software) are used :  
CPU  
Pentium® 300 MHz or higher  
Memory  
64 MB or more (128 MB or more recommended)  
Hard disk  
space  
100 MB or more (800 MB or more recommended)  
*2  
800 x 600 pixels or higher 16-bit color or higher  
Direct X compatible (Direct X 8.1 or later)  
Display  
*1 Use USB2.0 for writing to CD-R at 8X or higher, re-writing to CD-RW and playing back  
DVD-Video.  
The performance of this drive is not guaranteed unless the supplied USB cable is used.  
The performance of this drive connected via a USB hub is not guaranteed.  
*2 Ensure you have the contiguous hard disk space for stable writing.  
18  
Setup Your Computer  
Supplied Software  
The following software programs are included on the CD-ROM supplied with this  
drive.  
It is necessary to install the driver software to use this drive.  
Driver Software  
Install the following driver software first.  
1. USB Driver  
This is a device driver for Windows 98SE / Windows Me. If you use  
Windows 98SE / Windows Me, it is necessary to install this driver first.  
BInstall the USB Driver from the CD-ROM.  
Notes:  
B
For Windows Me, this drive can be operated with the OS standard USB  
driver, but it is possible that malfunctions will occur. We recommend you  
install the USB Driver supplied with this drive.  
BFor Windows 98SE, use a working drive for installation other than this  
drive.  
2. UDF Reader  
UDF Reader is driver software for reading DVD-RAMs in UDF 2.0 format.  
(DVD-RAMs recorded with a DVD video recorder are formatted in UDF 2.0.)  
UDF Reader installation is required for Windows OSs other than Windows XP.  
BInstall the UDF Reader from the CD-ROM.  
Note:  
B
UDF Reader and USB Driver can be installed at the same time.  
Application Software  
Install applications as you require (see p.38).  
1. DVD-Video Playback Software  
2. Writing Software  
– WinDVD 4  
CD-R/-RW Writing Software  
CD-RW Packet Writing Software  
B’s Recorder GOLD5 BASIC  
B’s CLiP5  
19  
Setup Your Computer  
Operating Procedures  
Reference page  
Checking OS  
21  
Windows XP  
Windows 2000  
Windows Me  
Windows 98SE  
Checking / Preparing USB  
22  
Installing USB Driver *1  
*1  
From floppy disk  
24  
*2  
From CD-ROM  
1 Connect the drive to the computer  
2 Insert the CD-ROM into the drive  
3 Install USB Driver from the CD-ROM  
30  
33  
24  
Installing UDF Reader *1  
*1  
From floppy disk  
27  
*2  
From CD-ROM  
30  
33  
27  
1 Connect the drive to the computer  
2 Insert the CD-ROM into the drive  
3 Install UDF Reader from the CD-ROM  
Installing Applications  
1 Connect the drive to the computer  
2 Insert the CD-ROM into the drive  
3 Install applications from the CD-ROM  
30  
33  
38  
See PDF manuals included on the CD-ROM.  
Using Applications  
*1  
*2  
USB Driver and UDF Reader can be installed at the same time.  
For Windows 98SE, use another drive other than this drive for installation.  
20  
Setup Your Computer  
Screen examples are from Windows XP unless otherwise indicated.  
For other Windows OSs, follow the equivalent prompts or instructions.  
Confirmation of Windows Version  
Check the Windows OS version of your computer.  
Windows XP  
From Task Bar, click [start] then right-click [My Computer] and click  
[Properties]. [System Properties] window appears on the screen.  
Windows 2000 / Windows Me / Windows 98SE  
Right-click [My Computer] icon on the screen, then click  
[Properties]. [System Properties] window appears on the screen.  
Confirm at the System Properties Window that Microsoft Windows XP,  
Microsoft Windows 2000, Microsoft Windows Meor Microsoft Windows 98 Second Edition”  
is installed.  
Indicates OS and version  
Note:  
This drive cannot be used with Windows 95, Windows 98 and Windows NT®.  
21  
Setup Your Computer  
Confirmation of USB Type  
If the computer is not compatible with USB2.0 and you use this drive connected  
to a USB port of the computer, this drive can only deliver USB1.1 performance. If  
you want USB 2.0 performance, it is necessary to purchase a USB2.0 interface  
card (see p.61).  
Refer to the computer manual to check which USB standard applies.  
I Using USB1.1  
If you use Windows 98SE / Windows Me, the USB Driver included on the  
CD-ROM must be installed. Go to Installing USB Driveron p.24.  
* If you use a Windows OS other than Windows 98SE / Windows Me, the USB  
Driver installation is not required.  
Windows XP / Windows 2000  
USB Driver installation is not required.  
Drive runs with standard USB driver included in OS.  
Go to Installing UDF Readeron p. 27.  
Windows 98SE / Windows Me  
For Windows Me, this drive can be operated with the OS standard  
USB driver, but it is possible that malfunctions will occur. We recommend  
you install the USB Driver supplied with this drive.  
Install the supplied USB Driver.  
Go to Installing USB Driveron p. 24.  
Notes:  
When the drive is connected with USB 1.1:  
BWriting and reading speeds are about 8X at maximum.  
BWhen playing a DVD-Video, frame-drops or block-noises may occur.  
We recommend you use USB2.0 for writing to CD-R at 8X or higher,  
re-writing to CD-RW and playing back DVD-Video.  
22  
Setup Your Computer  
I Using USB2.0  
When computer compatible with USB2.0 is used  
BWindows XP  
The USB Driver supplied with this drive is not required.  
(If Windows XP Service Pack 1 has not been installed, download using  
Windows Update.)  
Go to “Connecting USB Cable” on p.30.  
BWindows 2000  
After downloading updates from Windows Update, go to  
Installing UDF Readeron p.27.  
When computer that is not compatible with USB2.0 is used  
Connect a USB2.0 interface card to the computer, then install a USB driver  
appropriate to the OS on your computer. (Check the interface card  
manufacturers home page for the latest information.)  
BWindows XP  
USB driver is available from Microsoft Windows Update.  
Download Service Pack 1.  
Go to “Connecting USB Cable” on p.30.  
BWindows 2000  
USB driver update is available from Microsoft Windows Update.  
Download Service Pack 4.  
USB driver may be supplied with the interface card. Check the cards  
instruction manual or manufacturers home page for the latest information.  
Go to Installing UDF Readeron p.27.  
BWindows 98SE / Windows Me  
Install USB driver supplied with interface card.  
The USB Driver supplied with this drive can also be used.  
Go to Installing USB Driveron p.24.  
23  
Setup Your Computer  
Installing USB Driver  
The USB Driver supplied with this drive is for Windows 98SE and Windows Me.  
(USB Driver installation is not required for Windows OSs other than Windows  
98SE / Windows Me.)  
Caution:  
BUse the computer on AC power (not battery) to avoid power-down during  
setup.  
Note:  
BFor Windows Me, this drive can be operated with the OS standard USB  
driver, but it is possible that malfunctions will occur.  
We recommend you install the USB Driver supplied with this drive.  
Installing USB Driver from Floppy Disk  
1
2
Insert the floppy disk into floppy disk drive.  
(Refer to How to Make the CB30A Driver Installation Floppy Diskon p.45.)  
Double-click [My Computer] icon on the screen, then double-click  
3 [A:] (if the floppy disk drive is A).  
Double-click [Dsetup.exe].  
Setup window appears.  
(Go on to 4 on next page.)  
CB30A Driver  
Installing USB Driver from CD-ROM  
1
Insert the supplied CD-ROM into  
the drive.  
The program starts automatically, then  
Setup Menu appears.  
Notes:  
BIf the program does not start automatically, open My Computer and  
double-click CD-ROM icon, then double-click [Asmenu.exe  
CD-ROM to start Setup Menu.  
] in the  
BFor Windows 98SE, use a working drive other than this drive for installation.  
24  
Setup Your Computer  
2
3
Click [CB30A Driver] in Setup Menu.  
OS Check window appears. Click [Yes].  
USB Driver installation program starts.  
4
Setup window appears. Click [USB Driver] and select [Install],  
then click [OK].  
5
When installation completion window appears, click [OK].  
When USB Driver has been installed from the floppy disk, remove the  
floppy disk and close the floppy disk window.  
When installed from CD-ROM, applications included on the CD-ROM can  
be installed successively. To end installation, click [END].  
Note:  
BUSB Driver and UDF Reader can be installed at the same time. Select both  
USB Driver and UDF Reader.  
When both have been installed at the same time, restart the computer after  
installation.  
I To uninstall USB Driver  
Follow the steps on p.24 and 25, then at step 4, click [USB Driver] and select  
[Uninstall] on the Setup window, then click [OK].  
25  
Setup Your Computer  
Using DVD-RAMs in UDF 2.0 Format  
To read DVD-RAMs in UDF 2.0 format, a UDF reader compatible with UDF 2.0  
format is required.  
Install the UDF Reader included on the CD-ROM supplied with this drive.  
Only UDF formatted DVD-RAMs that are removable from cartridges or non-  
cartridge type can be used with this drive.  
I Using DVD-RAMs in UDF 2.0 format  
When DVD-RAMs are not used, go to Checking Setupon p.29.  
Windows XP  
UDF Reader installation is not required.  
Go to Checking Setupon p. 29.  
Windows 2000 / Windows Me / Windows 98SE  
Use UDF Reader supplied with this drive.  
Go to Installing UDF Readeron p. 27.  
26  
Setup Your Computer  
Installing UDF Reader  
The UDF Reader supplied with this drive is for Windows 98SE / Windows Me /  
Windows 2000.  
For Windows 2000, log in as a member of the users of Administrator group when  
installing.  
Caution:  
BUse the computer on AC power (not battery) to avoid power-down during  
setup.  
Installing UDF Reader from Floppy Disk  
1
2
Insert the floppy disk into floppy disk drive.  
(Refer to How to Make the CB30A Driver Installation Floppy Diskon p.45.)  
Double-click [My Computer] icon on the screen, then double-click  
3 [A:] (if the floppy disk drive is A).  
Double-click [Dsetup.exe].  
Setup window appears.  
(Go on to 4 on next page)  
Installing UDF Reader from CD-ROM  
CB30A Driver  
1
Insert the supplied CD-ROM into  
the drive.  
The program starts automatically, then  
Setup Menu appears.  
Notes:  
BIf the program does not start automatically, open My Computer and  
double-click CD-ROM icon, then double-click [Asmenu.exe  
CD-ROM to start Setup Menu.  
] in the  
BFor Windows 98SE, use a working drive other than this drive for installation.  
27  
Setup Your Computer  
2
3
Click [CB30A Driver] in Setup Menu.  
OS Check window appears. Click [Yes].  
UDF Reader installation program starts.  
4
Setup window appears. Click [UDF Reader] and select [Install],  
then click [OK].  
5
When Installation completion window appears, click [OK].  
When UDF Reader has been installed from the floppy disk, remove the  
floppy disk, then restart the computer following the on-screen instructions.  
When installed from CD-ROM, restart the computer following the on-screen  
instructions.  
Note:  
BIt is necessary to restart the computer in order to enable the UDF Reader  
after installation.  
I To uninstall UDF Reader  
Follow the steps on p.27 and 28, then at step 4, click [UDF Reader] and  
select [Uninstall] on the Setup window, then click [OK].  
28  
Setup Your Computer  
Checking Setup  
1
Connect the drive to the computer.  
See Connecting USB Cableon p.30.  
2
Double-click [My Computer] icon without inserting disc.  
Notes:  
BThis drive can be used when drive icons  
(for other Windows OSs) is added.  
(for Windows XP) or  
BIf one of the above icons does not appear correctly, select [Refresh] from  
pull-down menu in [View].  
BIf the drive icon is not added to My Computer, see Troubleshootingon  
p.47.  
29  
Connecting to Computer  
Connecting USB Cable  
Make sure that connection is established correctly.  
(Example)  
# Start up your computer.  
#
$ Connect the AC cord with AC  
adaptor, then connect to the  
drive.  
% Insert smaller plug of the  
supplied USB cable into drive  
USB Connector.  
& Insert bigger plug of the USB  
cable into a USB Connector on  
your computer.  
$
&
The drive will be turned on  
automatically and POWER/BUSY  
Indicator (green) is lit.  
$
%
Notes:  
BThe drive is turned ON/OFF automatically when the computer is turned  
ON/OFF.  
BThe drive can be turned ON/OFF automatically by connecting /  
disconnecting the USB cable.  
Cautions:  
BUse only the USB cable supplied.  
(Use of other cables may damage the drive and your computer.)  
BUnplug the AC cord from AC outlet when the drive is not in use for a  
prolonged period in order to save electricity. [When only the AC adaptor is  
connected, the AC adaptor consumes only 1W (at AC 120 V) of power.]  
BConnect the USB cable directly to your computers USB port.  
We cannot guarantee connection through a USB hub.  
BDo not turn off the drive when the computer is running and the drive is still  
connected to the computer.  
30  
Connecting to Computer  
Disconnecting USB Cable  
Before disconnecting USB cable, finish any writing, reading, or audio playback etc.  
performed by the application software, and then remove the disc from the drive.  
Cautions:  
B
While POWER/BUSY Indicator (green) is blinking or WRITE Indicator (amber)  
is lit:  
ADo not disconnect USB cable.  
ADo not disconnect AC adaptor.  
(It may cause data corruption or computer operation failure. If the operation  
becomes uncontrollable, restart or reset the computer.)  
BWhen Bs CLiP5is in use, right-click the [Bs CLiP] indicator in  
Task Tray. Select [Eject], then remove the disc and disconnect the USB  
cable.  
Windows XP / Windows 2000  
1
Double-click  
icon in Notification Area (Task Tray).  
[Safe To Remove Hardware] window appears.  
(The expression may differ depending on the Windows OS version. Follow  
the equivalent prompts or instructions.)  
2
3
Select USB Mass Storage Deviceand click [Stop] button.  
[Stop hardware device] window appears.  
Check GENERIC CDRCB03 USB Deviceis connected, then click  
[OK].  
Follow the on-screen instructions thereafter.  
After disconnecting the interface cable, close the [Safe To Remove Hardware]  
window.  
31  
Connecting to Computer  
I Windows XP  
(The window disappears automatically after a while.)  
I Windows 2000  
Windows Me / Windows 98SE  
I When using the supplied USB Driver  
The USB connectors can be Hot Plugged. This means the interface cable can  
be connected to or disconnect from the computer while it is ON.  
I
When using OS standard device driver under Windows Me  
1
Double-click  
Task Tray.  
icon in  
Follow the on-screen instructions  
thereafter.  
32  
Inserting / Removing a Disc  
This drive has a power-open mechanism. The Disc Cover will not open when the  
power is turned off.  
Inserting a Disc  
# Turn on the drive.  
The drive is turned on/off automatically  
when the computer is turned on/off.  
%
$
$ Press the Open Button.  
(The Disc Cover will open by selecting  
[Eject] in the active application.)  
% Open the Disc Cover.  
& Place a disc onto the disc spindle.  
Press on the center of a disc until it locks  
onto the disc spindle.  
l
&
#
' Close the Disc Cover.  
Cautions:  
BMake sure the disc is securely set. (If not, the disc may come off and be  
damaged.)  
BWhen the power is off, release the Disc Cover lock using Lock Release Lever  
(see p.35).  
Note:  
BThis drive is only compatible with non-cartridge type DVD-RAMs. To use  
TYPE2 or TYPE4 DVD-RAMs, remove the discs from cartridges.  
33  
Inserting / Removing a Disc  
This drive has a power-open mechanism. The Disc Cover will not open when  
power is turned off.  
Removing a Disc  
# Turn on the drive.  
%
The drive is turned on/off automatically  
$
when the computer is turned on/off.  
$ Press the Open Button.  
(The Disc Cover will open by selecting  
[Eject] in the active application.)  
'
% Open the Disc Cover.  
& Make sure the disc has stopped  
rotating.  
&
' Remove the disc.  
#
Pressing the disc spindle, lift the disc by  
holding its edge.  
Caution:  
BWhen using the drive connected to a computer, make sure POWER/BUSY  
Indicator (green) is not blinking, or WRITE Indicator (amber) is not lit after the  
application using this drive is closed.  
Notes:  
BThe Disc Cover is locked while the media formatted with Bs CLiP is used.  
Release the lock by selecting [Eject] from the indicator in Task Tray.  
BDuring data writing, the WRITE Indicator lights and the Disc Cover is locked,  
so it will not open.  
34  
Inserting / Removing a Disc  
When You Cannot Remove the Disc  
I Disc Cover Lock Force Release  
If the Disc Cover will not open due to the failures occurred while writing data  
to a disc or during power-down, or when the drive is not turned on, the Disc  
Cover lock can be released manually to open the Disc Cover.  
$
# Slide the Lock Release Lever  
located on the bottom.  
#
$ Open the Disc Cover.  
Caution:  
BIf the disc will not stop rotating, unplug the AC cord of AC adaptor and wait  
until the rotating stops completely. If the Disc Cover is opened while the disc  
is still rotating, the disc may come off.  
35  
Using DVD-RAMs  
This drive is only compatible with non-cartridge type DVD-RAMs.  
To use TYPE2 or TYPE4 DVD-RAMs, remove the discs from cartridges.  
Caution:  
BTake care not to contaminate the recording surface with fingerprints, dirt,  
dust and scratches. Do not drop or bend discs, or adhere labels on the  
recording surface.  
Notes:  
BIt may differ how to remove the discs from cartridges according to the disc  
manufacturer. Read the discs handling instructions carefully.  
BFor DVD-RAMs, a disc occasionally may take some time to be recognized.  
When it happens, remove the disc once, then insert it into the drive again.  
Disc conditions (dirt or scratches on the recording surface, or bad writing  
quality) may affect reading and writing.  
DVD-RAMs Recorded with DVD Video Recorder  
DVD_RTAVfolder is created on the DVD-RAM recorded with a DVD video  
recorder or a DVD camcorder conforming to the Video Recording standards,  
or with recording software program such as DVD-MovieAlbumSE 3  
conforming to the same standard.  
Do not access this folder or files in this folder on the computer. Some files in  
this folder exceed 2 GB. Due to the limit of Windows 98SE specifications, the  
files that exceed 2 GB may not be copied or the capacity of the disc may not be  
displayed correctly.  
Also if this folder or files are deleted or modified, the disc cannot be played  
back with a DVD video recorder or a recording software program on the  
computer.  
36  
Using Other Discs  
I CD-Rs  
Using Bs Recorder GOLD5 BASIC (see p.42), data CDs and Audio CDs can  
be created.  
(Writing to CD-R with Bs CLiP5 is not supported on this drive.)  
I CD-RWs  
After formatting a CD-RW with Bs CLiP5 format function (p.42), data in files  
can be written to the disc just like floppy disk. Also data CDs and Audio CDs  
can be created using Bs Recorder GOLD5 BASIC.  
I DVD-Videos  
DVD-Videos and Video CDs can be played back using WinDVD 4 (see p.39).  
I DVD-ROMs / CD-ROMs  
For usage of DVDs/CD-ROMs, refer to the manuals supplied with DVD/CD-  
ROM applications or Readme files.  
I Audio CDs  
To play back Audio CDs using this drive, it is necessary to enable Digital  
Playback on the computer. When Digital Playback is enabled, you can listen  
to the music from the speakers connected to the computer. (For details, refer  
to the computer instruction manual.)  
37  
Before Installing Applications  
If an earlier version of the same software or another companys writing /  
DVD-Video playback software is installed, uninstall them before installing the  
software supplied with this drive.  
If not installed, go to next page.  
I Uninstalling Software  
The expression may differ depending on Windows OS versions. Follow the  
equivalent prompts or instructions.  
Windows XP  
1
2
From the Start Menu,  
select [Control Panel] [Add or Remove Programs].  
[Add or Remove Programs] window appears.  
Select the software you want to remove from  
3 [Currently installed programs:], then click [Change/Remove].  
After removing the software, close  
[Add or Remove Programs], then restart the computer.  
Windows 2000 / Windows Me / Windows 98SE  
1
From the Start Menu,  
select [Settings] [Control Panel] [Add/Remove Programs].  
[Add/Remove Programs] window appears.  
(For Windows Me / 98SE, [Add/Remove Programs Properties])  
2
Select the software you want to remove from  
3 [Currently installed programs:], then click [Change/Remove].  
After removing the software,  
close [Add/Remove Programs], then restart the computer.  
(For Windows Me / 98SE, [Add/Remove Programs Properties])  
38  
Installing Video Playback Software  
I WinDVD 4  
InterVideo WinDVD 4 is included on the CD-ROM supplied with this drive.  
Install it from the CD-ROM. For installation and handling, refer to WinDVD 4  
manual included on the CD-ROM supplied with this drive.  
Cautions:  
BIf an earlier version of the same software or another companys video  
playback software is already installed, uninstall them before installing  
WinDVD 4.  
BClose all applications and resident monitoring programs such as antivirus  
programs before starting installation.  
Note:  
BFor Windows 2000 / XP, log in as a member of the users of Administrator  
group when installing.  
Installing WinDVD 4  
1
Insert the supplied CD-ROM.  
(The program starts automatically and the screen shown below appears.)  
To install WinDVD 4  
Note:  
BIf the program does not start automatically, open My Computer,  
double-click CD-ROM icon, then double-click [Asmenu.exe  
Setup Menu.  
] to start  
2
3
Click [WinDVD 4].  
(WinDVD 4 installer starts. Follow the on-screen instructions to proceed.)  
After installation is complete, click [END].  
39  
Installing Video Playback Software  
Using WinDVD 4  
Playback starts automatically after inserting a DVD-Video into the drive (when Auto  
Playback is ON).  
If not, from Task Bar, click [start], then select [All Programs] [InterVideo WinDVD 4] ➝  
[InterVideo WinDVD 4]. WinDVD 4 operating panel can be used for operation just like that  
of a home video recorder.  
Notes:  
B
Refer to WinDVD 4 manual included on the CD-ROM supplied with this drive  
for usage of WinDVD 4. To read the manual, click [WinDVD Manual], then  
select the manual you require.  
BDVD-Video image quality changes depending on disc or computer  
performance, or usage conditions.  
Functional Indication  
Symbol  
3
Meaning  
Number of languages / sounds  
1
Number of captions  
Number of angles  
Types of recorded screen size  
Region Code  
2
16:9 LB  
1
Copy protect  
Closed caption  
Single-sided,  
single layer disc  
Disc type  
40  
Installing Video Playback Software  
I Region Code  
Many DVD-Videos (DVDs) are protected by a Region Code.  
Region Codes are administered separately for each region shown below.  
To watch a DVD-Video, the following Region Codes must be consistent with  
each other.  
BRegion Code of DVD  
BRegion Code of this drive  
BRegion Code of DVD-Video playback software (WinDVD 4)  
When attempting to play back a DVD-Video with a different Region Code, a  
warning window appears. Click [OK]. Region Code setting window will appear.  
Check the setting and click [OK]. Playback software (WinDVD 4) and this  
drive will be set to a new Region Code. After checking the setting changes  
and closing the window, playback will start.  
The factory preset is Region Code 1.  
Region Code can be set up to 5 times. However, the factory preset is  
counted as the first time, so Region Code can be reset 4 more times at  
most.  
Note:  
BBe aware that when the Region Code has been reset for the fourth time,  
the setting is fixed and cannot be changed.  
Users take responsibility for any problems caused by resetting the Region  
Code improperly.  
41  
Installing Writing Software  
I Bs Recorder GOLD5 BASIC / Bs CLiP5  
BHA Bs Recorder GOLD5 BASIC and Bs CLiP5 are included on the  
CD-ROM supplied with this drive. Install them from the CD-ROM. For  
installation and handling, refer to Bs Recorder GOLD5 BASIC and  
Bs CLiP5 PDF manuals included on the CD-ROM supplied with this drive.  
Using this drive, data cannot be written to or erased from DVD media.  
BWriting Software (Bs Recorder GOLD5 BASIC)  
This multi-function writing software allows you to create your own data CDs  
and DVDs, and Audio CDs.  
BPacket Writing Software (Bs CLiP5)  
This writing software allows you to write the files to CD-RW just like writing  
to floppy disk.  
Cautions:  
BIf an earlier version of the same application or another companys software  
program that is equivalent to the supplied one is already installed in the  
computer, uninstall them before installing the application supplied with this  
drive. Co-existence of Bs CLiP5 with other companiespacket writing  
software or UDF reader in the same computer environment may cause  
problems.  
BInstall the writing software after USB Driver and UDF Reader installation are  
complete (p.24, 27).  
BFor Windows XP, disable Windows XP standard writing function when using  
Bs CLiP5.  
Note:  
BFor Windows 2000 / XP, log in as a member of the users of Administrator  
group when installing.  
42  
Installing Writing Software  
Installing Bs Recorder GOLD5 BASIC / Bs CLiP5  
1
Insert the supplied CD-ROM.  
(The program starts automatically and the screen shown below appears.)  
To install Bs Recorder GOLD5  
BASIC  
To install Bs CLiP5  
Note:  
BIf the program does not start automatically, open My Computer,  
double-click CD-ROM icon, then double-click [Asmenu.exe  
Setup Menu.  
] to start  
2
3
Click [Bs Recorder GOLD] or [Bs CLiP].  
(The selected software Installer starts. Follow the on-screen instructions to  
proceed.)  
Note:  
BWhen Bs Recorder GOLD5 BASIC and Bs CLiP5 are installed  
successively, it is not necessary to restart the computer before installing  
the second program. Restart the computer after installation of both  
programs is complete.  
After installation is complete, click [END] and then restart the  
computer.  
(Now you can use writing software.)  
43  
Installing Writing Software  
Using Bs Recorder GOLD5 BASIC / Bs CLiP5  
I Bs Recorder GOLD5 BASIC  
To start Bs Recorder GOLD5 BASIC, from the Start Menu, select  
[All Programs] [B.H.A] [Bs Recorder GOLD5] [Bs Recorder GOLD5].  
I Bs CLiP5  
Bs CLiP5 stays resident automatically after Windows startup.  
When an unused disc (media) or a disc formatted with Bs CLiP is inserted  
into the drive, Bs CLiP5 starts automatically.  
Caution:  
BFor Windows XP, disable Windows XP standard writing function.  
(From Task Bar, click [start] [My Computer], right-click DVD/CD-RW Drive,  
click [Properties] [Recording], then uncheck [Enable CD recording on this  
drive].)  
Note:  
B
Refer to Bs Recorder GOLD5 BASIC / Bs CLiP5 PDF manuals included on the  
CD-ROM supplied with this drive for usage of these writing software programs.  
To read the manuals, click [Bs Manual], then select the manual you require.  
It is necessary to install Adobe Acrobat Reader (Version 4.0 or later) to read PDF  
manuals. If not installed on your computer, click [Acrobat Reader] to install the  
application from the supplied CD-ROM.  
I Bs Recorder GOLD5 BASIC / Bs CLiP5  
For further information, access the URL on p.74.  
44  
How to Make the CB30A Driver Installation Floppy Disk  
USB Driver (included on the supplied CD-ROM)  
It is necessary to install USB device driver first when your computer is used  
Windows 98SE.  
This USB Driver is designed for your drive to be installed on windows 98SE only.  
Install this USB Driver from supplied CD-ROM or a floppy disk which you may  
create yourself as follows.  
Note:  
BIt is not necessary to install the USB Driver unless you use Windows 98SE.  
When you make the installation floppy disk, a formatted floppy disk, floppy  
disk drive and another CD-ROM drive are required.  
1
2 Insert the floppy disk into floppy disk drive.  
Insert the supplied CD-ROM into CD-ROM drive.  
The program starts automatically and Setup Menu appears. If the program  
does not start automatically, go to 4.  
3
4 Click [END] to close Setup Menu.  
5 From the Start menu, select [Programs] [Windows Explorer].  
Click the Folder of Explorer [CB30_SOFT] [CB30Driver].  
Drag & Drop  
6
Select all the files in a CB30 Driver Folder, then drag and drop  
7 onto the 3.5" floppy disk.  
After copy is complete, remove the floppy disk and supplied  
CD-ROM.  
45  
Maintenance  
I
When the outside of the drive is dirty:  
Wipe with a soft cloth.  
I When the turntable is dirty:  
Wipe turntable (black part) with a cotton  
swab in a circular motion.  
Turntable  
Cotton Swabs  
B Do not touch lens.  
I When the disc is dirty:  
I When the lens is dirty:  
Wipe the disc using a soft lint-free cloth  
which has been dipped in water, and  
then wipe with a dry lint-free cloth.  
The disc must be wiped from the inside  
toward the outside.  
Clean the lens with a commercial lens  
blower.  
Camera Lens  
Blower  
Lens  
recording  
surface  
Do not use cleaning disc. It may cause a  
failure.  
Notes:  
BDo not use record cleaners, static protection sprays and chemicals such as  
benzine, thinner or alcohol. It may cause deformation or discoloration.  
BUse LF-K200DCA1 for cleaning the DVD-RAM discs.  
46  
Troubleshooting  
If a problem occurs, check the following:  
Trouble  
Possible Cause & Solution  
Pages  
Check that the AC adaptor is connected correctly.  
B
AC adaptor auto protect function may be working.  
Disconnect AC adaptor and connect it again after  
few minutes.  
Check that the computer is set up.  
BInstall USB Driver and UDF Reader.  
24, 27  
BIf you use an interface card, use the latest driver. 23  
Check that the USB cable is connected correctly.  
BMake sure USB cable is connected correctly.  
30  
Check that the USB cable was disconnected  
correctly.  
Drive is not recognized by  
computer, or does not  
function properly.  
1
BIf you did not follow the procedure for connecting 3032  
/ disconnecting USB cable as explained in this  
manual, the drive icon may not be visible.  
Restart the computer.  
Check whether or not interface cable pins are bent  
or broken.  
BIf they are bent or broken, contact  
back cover  
a service center.  
Check that the Power Switch is ON.  
BIf the Power Switch is OFF, turn it ON, then  
16  
restart the computer.  
(Continued next page)  
47  
Troubleshooting  
Trouble  
Possible Cause & Solution  
Pages  
Check that your Windows OS supports this drive.  
B
The drive operates under Windows 98SE /  
Windows 2000 / Windows Me / Windows XP.  
(For Windows 98SE, the USB Driver is required.)  
21  
Check that the driver is installed properly using Device Manager.  
(The expression may differ depending on Windows OS versions.  
Follow the equivalent prompts or instructions.)  
1 Click [start] right-click [My Computer] select [Properties].  
2 Select [Hardware] [Device Manager] [View] [Device].  
After installation, connect the drive to the computer, then the  
window below appears.  
BWindows XP / Windows 2000 (OS standard driver)  
Drive is not recognized  
by computer, or will not  
function properly.  
BWindows 98SE / Windows Me (Supplied driver)  
1
BWindows Me (OS standard driver)  
48  
Troubleshooting  
Trouble  
Possible Cause & Solution  
Pages  
Check that the disc is UDF formatted.  
BUse discs formatted in UDF2.0 with a DVD video  
recorder, and formatted in UDF1.5 or UDF2.0  
with a DVD-RAM drive.  
Check whether or not a disc in UDF2.0 format is  
inserted.  
BSet up the drive (Install CB30A Driver) to install 27  
UDF Reader.  
DVD-RAM is not  
recognized.  
2
Check whether or not the disc is dirty or scratched.  
BClean the disc.  
46  
Check that the disc (media) and writing format are  
correct.  
BDVD-R 4.7GB (For General and Authoring),  
12, 37,  
DVD-R 3.95GB or DVD-RW 4.7GB Ver1.1 must 62  
be used with this drive.  
Data cannot be read  
from DVD-R or DVD-RW.  
3
BFor disc (media) writing formats compatible with  
this drive.  
49  
Troubleshooting  
Trouble  
Possible Cause & Solution  
Pages  
Check that the drive is not running.  
BThe Disc Cover will not open by pressing the  
Open Button during a write operation. Wait until  
writing is complete.  
BWhen using Bs CLiP5, right-click the indicator  
in Task Tray and select [Eject]. If the Disc Cover  
will not open by selecting [Eject], use  
Lock Release Lever.  
35  
Disc cannot be removed.  
(Disc cover will not open.)  
4
This is normal. If they are excessively hot,  
disconnect the AC cord, then contact  
a service center.  
back cover  
Drive or AC adaptor are  
hot.  
5
Check that the disc (media) and writing formats are  
correct.  
BThis drive does not support packet writing to  
CD-Rs (with Bs CLiP 5).  
Use packet writing for CD-RWs.  
6
Cannot write properly.  
BFor Windows XP, disable Windows XP standard 44  
writing function.  
BRefer to FAQand manual for the writing  
53  
software.  
50  
Troubleshooting  
Trouble  
Possible Cause & Solution  
Pages  
Check that the disc is inserted with the label side  
facing upward.  
BInsert the disc into the drive correctly.  
33  
Check that the disc and the drive lens are clean.  
BClean them referring to Maintenance.  
46  
Check whether or not there are scratches on the  
disc.  
Audio skip occur. /  
Data cannot be read or  
written.  
BUse another disc to check that the drive has no  
failures.  
7
Check whether or not dirt is adhered on the  
turntable.  
BClean the turntable referring to Maintenance.  
46  
Check that the compatible disc is used.  
BCheck the disc is compatible with this drive.  
12, 61  
BData on Copy Control CD (copy protected CD)  
cannot be written with this drive.  
51  
Troubleshooting  
Trouble  
Possible Cause & Solution  
Pages  
When playing a CD with this drive using CD  
playback software incorporated in the computer,  
it is necessary to enable digital playback function.  
Check that the digital playback is enabled.  
BIf not, enable digital playback referring to the  
computer instruction manual.  
No sound from  
Audio CD or CD-ROM.  
8
Check whether or not the computer sound volume  
is muted or too low.  
BAdjust computer sound volume.  
52  
FAQ  
For questions on this drive, read Troubleshooting on p.47-52 first.  
I Writing  
Writing to  
disc appears to  
start normally,  
but fails. Why?  
SmoothLink may not be functioning. Check the  
SmoothLink function setting in writing software and  
the following:  
BDisable suspend and resum functions.  
BClose resident software and other programs.  
If SmoothLink function is OFF, writing data to media  
may fail due to interruption during data transmission  
from the computer.  
To avoid:  
BChange writing speed (to a lower speed).  
Before actually writing to the media, execute  
Simulateusing the writing software.  
Available working speed may change depending  
on the computer environment. Check the following:  
BPerform hard disk maintenance. (Defragment hard  
disk after disk scanning.)  
BDisable suspend and resume functions.  
BClose resident software and other programs.  
BTurn off screen saver.  
BTurn off Active Desktop.  
BDo not configure network connection.  
53  
FAQ  
Writing fails.  
Why?  
Check that media recommended for this drive is  
used, and the writing speed is appropriate to the  
media.  
BUse discs (media) recommended for this drive  
(see p.61).  
BUse High Speed CD-RW for 4-10X writing and  
Ultra Speed CD-RW for 8X writing or higher.  
Why does  
It is caused by a difference in sector size  
between the disc (media) and the hard disk. When  
data is written to disc (media), the data size becomes  
slightly bigger than that of the data stored on a hard  
disk.  
data size change  
before and after  
writing?  
Depending on the writing mode, the information area  
is also used.  
How can I  
make my best  
selection Audio  
CD?  
Extract the data you want from each Audio CD  
and write it to the hard disk as wav files (S.wav),  
using the supplied writing software.  
For details, refer to the PDF manual for the supplied  
writing software.  
Is it possible  
to use several  
drives or writing  
software  
programs for  
additional  
Use the same drive and the same software for  
additional writing.  
If you do not, previously written data may not be  
readable. A disc written on more than one drive may  
not be read or written correctly.  
writing?  
54  
FAQ  
Can data be  
written while  
several writing  
software  
programs are  
installed?  
It is possible that data will not be written correctly  
in the following situations:  
BSeveral writing software programs are running  
simultaneously. (Including resident writing  
software.)  
BMore than one version of the same writing software  
is installed.  
Is it  
Some computers require switching between  
USB 1.1 and USB 2.0 by changing BIOS settings.  
Set to USB 2.0 referring to computer instruction  
manual.  
necessary to  
change the BIOS  
setting on  
computer?  
Is it possible  
to write Audio  
data (CD-DA) On  
The Fly from  
Some internal CD-ROM drives may not perform  
high-speed reading.  
BUse this drive to write the data to the computer  
hard disk. For details, refer to PDF manual  
included on the CD-ROM supplied with this drive.  
computers  
internal drive?  
BPerform hard disk maintenance. (Defragment hard  
disk after disk scanning.)  
BMake sure the writing softwares SmoothLink  
function is ON. (The default is ON.)  
55  
FAQ  
I Reading  
Drive cannot  
perform reading  
at maximum  
Check that the computer is set to USB2.0. Also  
check that the driver is installed properly using Device  
Manager. (The expression may differ according to OS  
versions. Follow the equivalent instruction.)  
speed. Why ?  
1 Click [start] right-click [My Computer] select [Properties]  
2 Select [Hardware] [Device Manager] [View] [Device  
by connection]  
After installation, connect the drive to the computer,  
then the window below appears.  
USB2.0 (Example : Windows XP)  
This drive is normally connected to the card  
manufacturers controller when using interface card.  
USB1.1 (Example : Windows XP)  
This drive is normally connected to the computers  
controller.  
56  
FAQ  
Drive cannot  
perform reading at  
maximum speed.  
Why ?  
The drive may not perform reading at maximum  
speed depending on the discs.  
BDiscs that do not conform may not be read at  
maximum speed.  
Can disc  
(media) written  
with this drive be  
read using other  
drives?  
BCD-R/-RW  
Use a multi-read drive. Some CD-ROM drives  
may not read discs written with this drive.  
Can a disc  
written with  
another drive be  
read using this  
drive?  
Normally the disc can be read.  
However, a disc written with several different drives  
may not be read. Media written with certain drives  
may also not be read.  
How can I  
write Audio data  
(CD-DA) to  
Use the supplied writing software. Data cannot  
be written to the hard disk with Drag & Drop  
operation.  
computer hard  
disk?  
Data on Copy Control CD (copy protected CD)  
cannot be written to the hard disk using this drive.  
57  
FAQ  
I Others  
This drive  
cannot be  
You cannot use the writing software that is not  
compatible with this drive.  
recognized by  
writing software  
except for the  
supplied writing  
software. Why?  
Can this  
drive be placed  
in a vertical  
position ?  
Performance in a vertical position is not  
guaranteed and it may cause failures.  
Use this drive in a horizontal position.  
58  
FAQ  
I Playback DVD-Video  
DVD-Video  
cannot be played  
back.  
Refer to the DVD-Video playback software  
manual or on-line help, and check the following:  
BWhen several drives are connected to the  
computer, this drive may not be selected.  
BDVD-Video cannot be played back unless Region  
Codes of the DVD-Video, this drive and the  
DVD-Video playback software are consistent with  
each other. Check the Region Codes.  
DVD-Video may not be played back  
automatically depending on the DVD recording  
format.  
Follow the instructions below:  
BStart WinDVD 4, then insert the disc into the drive.  
BSelect the file from the WinDVD 4 playback menu  
to play back.  
59  
FAQ  
DVD-Video  
sounds and  
images cannot  
be played back  
smoothly. Why?  
BWhether or not DVD-Video is played back  
smoothly depends on the computer system  
performance.  
Refer to the DVD-Video playback software manual  
and on-line help, and check the following:  
BFor USB 1.1 interface, images and sounds may be  
interrupted. Use USB2.0.  
BClose other applications. When many applications  
are running, CPU performance may be inadequate.  
BChange the settings for display area and color.  
CPU performance will be used more effectively by  
reducing area and color.  
BCheck the CPU speed setting.  
The power management may be set to power save  
mode.  
BCheck that the sound setting is not set to mute.  
60  
Recommendations  
The following recommendations are available through your local retailer.  
I Recommended Discs  
Disc  
Manufacturer  
Taiyo Yuden Co., Ltd. / RICOH Co., Ltd. /  
Mitsubishi Kagaku Media Co., Ltd. / Hitachi Maxell, Ltd.  
CD-R  
CD-RW  
RICOH Co., Ltd. / Mitsubishi Kagaku Media Co., Ltd.  
High Speed CD-RW RICOH Co., Ltd. / Mitsubishi Kagaku Media Co., Ltd.  
Ultra Speed CD-RW Mitsubishi Kagaku Media Co., Ltd.  
I USB2.0 Interface Cards (performance verified)  
Model No.  
Manufacturer  
For PCI board  
REX-PCIU2  
For PCMCIA card  
REX-CBU2  
RATOC  
ADAPTEC  
MELCO  
AUA-2000LP  
IFC-USB2P  
USB2-PCI2  
AUA-1420  
IFC-USB2CB  
CBUSB2  
IAO DATA  
61  
Specifications  
Ambient  
During operation : 41 - 95 °F (5 - 35 °C)  
temperature  
For storage : -4 - 131°F (-20 - 55°C)  
During operation : 20 - 85% RH (non condensing)  
For storage : 15 - 85 % RH (non condensing)  
Humidity range  
Dimensions  
(W x D x H )  
5.12" x 6.18" x 0.73" (130 x 157 x 18.5 mm)  
Mass (Weight)  
Approx. 0.66 lb. (300  
)
AC adaptor  
Power source  
KX-WZ712 (supplied)  
100 240 V AC, 50/60 Hz  
Power consumption During data transfer : Approx. 10 W  
(with AC 120V)  
while AC adaptor is connected to outlet : Approx. 1 W  
Compatible interface USB2.0 and USB 1.1  
Cable length (including connector): Approx. 39.37" (1m)  
Supplied USB cable  
Buffer size  
Mass (Weight) : Approx. 0.08 lb. (35  
)
2MB  
CD-DA (Audio CD), CD TEXT, CD-EXTRA,  
CD-ROM (Mode 1, Mode 2 Form 1),  
CD-ROM XA (Mode 2 Form 2),  
Compatible format  
*1  
Photo CD (compatible with Multisession), Video CD  
*3  
DVD-RAM (80 mm, 120 mm)  
Single 4.7 GB, 2.6 GB, 1.4 GB  
Dual 9.4 GB, 5.2 GB, 2.8 GB  
DVD-R (for General, Ver 2.0) 4.7 GB (120 mm)  
DVD-RW (Ver 1.1) 4.7 GB (120 mm)  
*2  
*4  
Compatible disc  
DVD-ROM, DVD-Video, DVD-R (for Authoring)  
(80 mm, 120 mm)  
CD-R (74 minutes / 80 minutes),  
CD-RW, High Speed CD-RW,  
Ultra Speed CD-RW (74 minutes / 80 minutes)  
(120 mm)  
*1  
*2  
When using a Photo CD, playback software program is required.  
Disc capacities are for unformatted discs.  
Both sides of double sideddiscs cannot be recorded or played back simultaneously.  
Use only non-cartridge type discs, and TYPE 2 and TYPE 4 discs removed from cartridges.  
Writing to DVD-RAM/-R /-RW is not supported.  
*3  
*4  
Compatible with 3.95 GB / 4.7 GB DVD-R for Authoring written with Disc at Once.  
62  
Specifications  
Factory preset  
Max. number of times  
setting can be  
changed  
1
4
Region Code Setting  
DVD-ROM  
CD-ROM  
DVD-RAM  
180 ms  
130 ms  
Seek time  
(as measured by Panasonic software)  
x 1 (reading) (2.6 GB)  
x 2 (reading) (4.7 GB)  
DVD-ROM (Single) Max. x 8 (reading)  
Continuous data  
transfer speed  
(using USB 2.0)  
1X transfer rate  
DVD media : 1385 kB/s  
CD media : 150 KB/s  
DVD-ROM (Dual)  
DVD-R /-RW  
DVD-Video  
CD-R  
Max. x 6 (reading)  
*5  
Max. x 4 (reading)  
Max. x 24, Max. x 16 / 8 / 4 (writing)  
Max. x 16 / 10 / 8 / 4 (writing)  
CD-RW  
CD-ROM /-R  
CD-RW  
CD-DA  
Max. x 24 (reading)  
Max. x 20 (reading)  
* Specifications and design are subject to change without notice because of product improvement.  
*6  
Computers  
IBM PC / AT compatible computer  
Windows XP  
Windows Me  
Windows 2000  
Windows 98SE  
Windows  
OSs  
*7*8  
When using visual application : Pentium® 400 MHz or higher  
When using data application : Pentium® 300 MHz or higher  
*7  
CPU  
When using visual application : 64 MB or more  
When using data application : 64 MB or more (128 MB or more)  
*7  
Memory  
Hard disk  
space  
100 MB or more (800 MB or more recommended)  
*7  
*5  
*6  
*7  
Data transfer speed depends on computer performance and may be lower than speeds given.  
Only models with USB port.  
Computer environment required depends on application software. Check the software  
manufacturerssupport information beforehand.  
*8  
Windows 2000 / Windows XP server OSs do not support this drive.  
63  
End-user License Agreement  
THIS IS A LEGAL AGREEMENT BETWEEN YOU AND PANASONIC. CAREFULLY  
READ ALL THE TERMS AND CONDITIONS OF THIS AGREEMENT PRIOR TO  
OPENING THE SOFTWARE PROGRAM PACKET. OPENING THE PACKET INDICATES  
YOUR ACCEPTANCE OF THESE TERMS AND CONDITIONS. If you do not agree to  
these terms and conditions, return the unopened packet and the other components of the  
Panasonic product to the place of purchase and your money will be refunded. No refunds  
will be given for product that have an opened packet or missing components.  
1. COPYRIGHT:  
Panasonic has the right to license or has been granted to license the enclosed software  
program (SOFTWARE), developed and copyrighted by Panasonic Communications Co.,  
Ltd. or its licensor (Licensor). You acknowledge that you are receiving only a LIMITED  
LICENSE TO USE the SOFTWARE and related documentation, and that you shall obtain  
no title, ownership nor any other rights in or to the SOFTWARE and related  
documentation, all of which title and rights shall remain with Licensor and Panasonic.  
2. LICENSE:  
(1) You have the non-exclusive right to use the one copy of the SOFTWARE on a single  
computer used by single user. Installation of the SOFTWARE on a network server for the  
purpose of distribution to one or more other computers shall not be granted in this  
Agreement. (2) You may not copy, reproduce, or permit to be copied or reproduced, the  
SOFTWARE or related documentation for any purpose, except that you may either (a)  
make a reasonable quantity of copies of the SOFTWARE solely for backup or archival  
purposes, or (b) transfer the SOFTWARE to a single hard disk, provided that you keep the  
original solely for backup or archival purposes. All other copies of the SOFTWARE are in  
violation of this Agreement. (3) You may not rent or lease the SOFTWARE, but you may  
transfer your right under this License Agreement on a permanent basis, provided that you  
transfer this Agreement, all copies of the SOFTWARE, all related documentation and your  
Panasonic product, and the recipient thereof agrees the terms of this Agreement. (4) You  
may not reverse engineer, decompile or disassemble the SOFTWARE, except that in  
European Union and European Free Trade Association, you may have the limited right to  
reverse engineer, decompile or disassemble the SOFTWARE solely to the extent  
specifically permitted by the terms and conditions of Article 6 of the European  
Communitys Directive for the Legal Protection of Computer Programs, OJL 122/42 (17  
May 1991). (5) You may not use, copy, modify, alter, or transfer the SOFTWARE, or any  
copy thereof, in whole or in part, except as expressly provided in this Agreement.  
64  
End-user License Agreement  
3. TERM:  
This license is effective until terminated. You may terminate this Agreement at any time by  
destroying the SOFTWARE and related documentation and all copies thereof. This license  
will also terminate if you fail to comply with any term or condition of this Agreement. Upon  
such termination, you agree to destroy all copies of the SOFTWARE and related  
documentation.  
4. LIMITED WARRANTY:  
Within ninety (90) days of your receipt of the SOFTWARE, Panasonic warrants that the  
storage media on which the SOFTWARE are furnished is free from defect in materials and  
workmanship under normal use, and that it will repair or at its option replace any defective  
media at no charge to you, provided that such defective media is returned to Panasonic  
within such ninety (90) days period.  
5. LIMITATION OF LIABILITY:  
EXCEPT AS STATED ABOVE, NEITHER PANASONIC, PANASONICS SUPPLIER  
MAKES OR PASSES ON TO YOU OR OTHER THIRD PARTY, ANY WARRANTY OR  
REPRESENTATION INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY  
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. WITHOUT  
LIMITING THE GENERALITY OF THE FOREGOING, NEITHER PANASONIC NOR  
PANASONICS SUPPLIER WARRANTS THAT THE SOFTWARE WILL BE ERROR-  
FREE OR THAT IT WILL MEET YOUR REQUIREMENTS. NEITHER PANASONIC NOR  
PANASONICS SUPPLIER SHALL BE LIABLE FOR ANY DAMAGE SUFFERED BY YOU  
INCLUDING, BUT NOT LIMITED TO, CONSEQUENTIAL, INCIDENTAL SPECIAL OR  
PUNITIVE DAMAGES. THE ABOVE LIMITATIONS SHALL APPLY REGARDLESS OF  
THE FORM OF ACTION WHETHER IN CONTRACT, TORT (INCLUDING  
NEGLIGENCE), STRICT PRODUCT LIABILITY OR OTHERWISE, EVEN IF SUCH  
PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  
65  
Glossary  
Basic Input Output System. The BIOS is a fundamental part  
of the software that controls the floppy disk drive, hard disk  
drive, keyboard and other hardware. It is normally  
preinstalled.  
BIOS  
Buffer Under Run  
or  
Buffer Under Run occurs when drives buffer memory  
becomes empty for an instant while writing to a disc.  
Buffer Under Run Error Writing becomes interrupted and writing error occurs.  
In addition to Audio data, CD-EXTRA also has CD-ROM  
data. Audio data is stored on the inner tracks and CD-ROM  
data on the outer tracks.  
It bears one of the following logos.  
CD-EXTRA  
Compact Disc Recordable. Once data is written to it, the  
data cannot be erased or rewritten. Depending on the  
writing mode, it may be possible to write additional data in  
CD-R  
available disc space afterwards.  
Compact Disc ReWritable. Data written to a CD-RW can be  
CD-RW  
deleted, either in its entirety or for the last session.  
CD-RWs are rewritable.  
Records all the data selected onto a single disc at one time.  
Additional data can not be written to disc afterwards.  
Disc at Once  
DVD  
Digital Versatile Disc. A DVD is the same size as a CD, but  
has a data capacity 7 times larger than that of a CD-ROM.  
DVD-RAM is one DVD standard. Removable disc that can  
be read or written repeatedly.  
DVD-RAM  
DVD-Video is one DVD specification. DVDs used for  
movies and home videos have this specification. It is  
possible to have soundtrack and subtitles in other  
languages, or a function to allow switching between camera  
angles.  
DVD-Video  
66  
Glossary  
DVD Video  
Recording  
standards  
DVD Video Recording standards is one DVD standard.  
It is one method for recording a video data to a DVD.  
Also called VR standardor VR format.  
Conversion of moving image data into MPEG files that  
conform to DVD-Video standards.  
Encoding can be done by software running on a CPU or a  
dedicated IC.  
Encode  
or  
Encoding  
4-10X writing speed-compatible CD-RW media.  
High Speed CD-RW-compatible drive is required for writing.  
High Speed  
CD-RW  
It bears  
logo.  
Enables peripheral device connection and disconnection  
with computer power ON.  
Hot Plug  
Process of loading software programs such as device  
drivers into a computer.  
Installation  
Multiborder  
Multisession  
DVD-R format with the equivalent functions to those of  
Multisession. Enables additional writing to a DVD-R.  
CD-ROM format. Enables writing of several sessions on  
one CD.  
A method of reading data from source files directly, then  
writing it to a disc (media). Large image file is not required,  
therefore data transfer can be completed with minimum  
hard disk space.  
On The Fly  
Packet writing  
Photo CD  
A method of writing data on a CD in small increments.  
A technology developed by Eastman Kodak Company.  
A large amount of image data (photos etc.) can be stored  
on a CD-ROM.  
DVD-Videos can only be played back in the region  
specified by their code. Codes are administered separately  
for each region. The Region Code for the U.S.A. is 1.  
Region Code  
SmoothLink  
A technology developed by Matsushita Electric Industrial  
Co., Ltd. to avoid buffer under run error.  
67  
Glossary  
Records one track on a disc at one time. Used for making  
CD-EXTRA.  
Track at Once  
UDF format  
Universal Disk Format. A disc format used for packet  
writing and many DVDs (DVD-RAM, DVD-Video,  
DVD-ROM, DVD-R and DVD-RW).  
8-24X writing speed-compatible CD-RW media.  
Ultra Speed CD-RW-compatible drive is required for writing.  
Ultra Speed  
CD-RW  
It bears  
logo.  
Universal Serial Bus. Industry standard for connection  
between computers and peripheral devices.  
USB  
High-speed USB interface established by USB-IF (USB  
Implementers Forum) compatible with USB1.0 and 1.1.  
Maximum transfer speed is about 40 times faster than that  
of USB 1.1.  
USB2.0  
68  
Index  
A
H
AC adaptor ..................... 8, 9, 10, 30  
AC cord................................ 8, 9, 30  
Audio CD ..................................... 37  
High Speed CD-RW .............. 61, 67  
I
Interface Card.............................. 61  
B
L
BIOS....................................... 55, 66  
Bs CLiP5 .......................... 19, 42, 74  
Bs Recorder GOLD5 BASIC  
..................................... 19, 42, 74  
Buffer Under Run..................... 3, 66  
Lock Release Lever............... 17, 35  
M
Multiborder................................... 67  
Multisession................................. 67  
C
O
CD................................................ 12  
CD-DA.......................................... 12  
CD-EXTRA ............................. 12, 66  
CD-R ................................. 12, 37, 66  
CD-ROM................................. 12, 37  
CD-ROM XA ................................ 12  
CD-RW.............................. 12, 37, 66  
Copy Control ..................... 11, 51, 57  
Open Button .................... 16, 33, 34  
P
Packet writing (Packet Write)  
.......................................... 19, 67  
Photo CD................................ 12, 67  
POWER/BUSY Indicator... 16, 31, 34  
Power Switch............................... 16  
D
R
DC Input Terminal........................ 17  
Disc.................................. 12, 33, 37  
Disc at Once .......................... 62, 66  
Disc Cover............................. 16, 33  
DVD ....................................... 12, 66  
DVD-R .................................... 12, 49  
DVD-RAM ......... 12, 13, 14, 36, 49, 66  
DVD-ROM .............................. 12, 37  
DVD-RW................................. 12, 49  
DVD-Video................... 12, 37, 59, 66  
Region Code.............. 12, 40, 41, 67  
S
SmoothLink .............................. 3, 67  
T
Technical Support Calls  
....................................back cover  
Track at Once.............................. 68  
69  
Index  
U
UDF Format................................. 68  
UDF Reader ..................... 19, 26, 27  
Ultra Speed CD-RW......... 12, 61, 68  
USB cable.............................. 30, 31  
USB Connector....................... 17, 30  
USB Driver ........................ 19, 24, 45  
USB1.1 ................................... 22, 56  
USB2.0.............................. 23, 56, 68  
V
Video CD...................................... 12  
W
WinDVD 4.................... 19, 39, 40, 74  
WRITE Indicator................ 16, 31, 34  
70  
Limited Warranty  
Panasonic Digital Document Company  
Unit of Matsushita Electric Corporation of America  
Two Panasonic Way  
Secaucus, NJ 07094  
LIMITED WARRANTY  
PANASONIC Drive  
Panasonic Digital Document Company will either repair this product with new or comparable, reconditioned parts,  
or exchange this product with a new or comparable rebuilt, reconditioned or reclaimed unit free of charge in the  
U.S.A. In the event of a defect materials or workmanship as follows:  
A. For twelve (12) months from the date of purchase, as established by the purchase receipt or other proof of  
purchase.  
OR  
B. For fifteen (15) months from the date of manufacture, as on the serial number label on the unit.  
Whichever comes last.  
SERVICE  
Carry-in or mail-in service can be obtained during the warranty period. For instructions on how to obtain service  
on this product, call the Panasonic Hotline at 1-800-PANASYS. Be sure that all shipping costs are prepaid and  
that the package is adequately insured before sending the unit to the Panasonic Repair Center. Return Shipping  
costs will be paid by Panasonic Digital Document Company Unit of Matsushita Electric Corporation of America.  
This warranty is extended only to the original purchaser. A purchase receipt or other proof of date of original  
purchase will be required before warranty performance is rendered.  
This warranty only covers failures due to defects in materials or workmanship which occur during normal use. It  
does not cover failures due to damage which occurs in shipment or failures which are caused by products  
(including software) not supplied by Panasonic Digital Document Company or failures which result from accident,  
misuse, abuse neglect, mishandling misapplication, alteration, faulty installation, modification or service by  
anyone other than a factory service center or damage that is attributable to lightening, line voltage variations, or  
acts of God.  
There are no express warranties except as listed above.  
INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF, OR INABILITY TO USE  
THIS PRODUCT, OR CONSEQUENTIAL DAMAGES RESULTING FROM USE OF THIS PRODUCT, OR  
ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING WITHOUT LIMITATION. LOSS OF  
STORED DATA.  
DURATION OF IMPLIED WARRANTIES, IF ANY, IS LIMITED TO 90 DAYS.  
Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how  
long an implied warranty lasts, so the above exclusions or limitations may not apply to you.  
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.  
If a problem with your Panasonic product develops during the warranty period, first contact your Panasonic dealer  
or Panasonic Digital Document Company listed on other side. If the problem is not handled to your satisfaction,  
then write to the Service Administration Manager, Panasonic Digital Document Company Unit of Matsushita  
Electric Corporation of America, Two Panasonic Way, Secaucus, NJ 07094.  
71  
Please  
Stamp Here  
PANASONIC DIGITAL DOCUMENT COMPANY  
Two Panasonic Way, Panazip: 7D-7  
Secaucus, N.J. 07094  
Bending line  
SO THAT WE MAY HELP YOU  
Complete and immediately mail the Product Analysis Card. We ask that you complete the  
questionnaire for two reasons:  
1. The US Center for Devices and Radiological Health requires that Panasonic keep a record of  
installation of all installed optical laser equipment that can be supplied to them upon demand.  
2. This data will be used to build a data base of end user application information for analysis that  
will assist Panasonic in determining how better to provide customer support and for future  
product enhancements.  
IF YOU SHIP THE PRODUCT  
Carefully pack and send it prepaid, adequately insured and preferably in the original carton. Attach  
a letter, detailing the complaint, to the outside of the carton.  
Do not send the product to the Executive or other Panasonic locations. They are NOT equipped to  
make repairs.  
Panasonic Digital Document Company  
Unit of Matsushita Electric Corporation of America  
Two Panasonic Way, 7D-7  
Secaucus, NJ 07094  
Correspondence onlydo not ship defective product to this address. Instead, to locate the closest  
authorized service to you, please call 1-800-PANASYS (726-2797).  
Do not staple-please tape  
Panasonic DVD-ROM &CD-R/RW Drive Analysis Card  
Type of Organization:  
Model Number:  
(e.g. Government, Industrial, Commercial,  
Educational, Medical, etc.)  
Serial Number:  
Drive Application:  
Device Driver Software Version:  
Date of Purchase:  
(e.g. Desk top publishing, Graphics, Data  
Backup, etc.)  
Is this the first Drive system  
purchased/installed?  
Where did you purchase your Drive?  
Yes  
No  
Dealer Name:  
Address:  
City:  
If No: Please list model and manufacturer of  
previous installations:  
State:  
Zip:  
What computer will this Drive be used with?  
Type of computer:  
(e.g. IBM PC/AT, etc.)  
Who is the main user?  
Company Name:  
Address:  
May we use your organization as a reference  
of being a Panasonic Drive installation to  
inquirers?  
City:  
Yes  
No  
State:  
Zip:  
Comments:  
Telephone:  
FAX:  
Contact:  
Thank you for your effort in filling out this questionnaire. If you should need assistance from  
Panasonic please call:  
1-800-PANASYS (726-2797)  
Panasonic Digital Document Company  
Unit of Matsushita Electric Corporation of America  
Two Panasonic Way  
Secaucus, NJ 07094  
Product Information  
For the applications supplied with this drive, contact software manufacturer directly.  
WinDVD 4  
InterVideo, Inc.  
If you have any questions about WinDVD 4, contact directly the following support  
center.  
E-mail Support  
Bs Recorder GOLD5 BASIC / Bs CLiP5  
B.H.A Corporation  
For any technical inquiries regarding B's Recorder GOLD5 BASIC/B's CLiP5, use  
the contacts given below.  
74  
This product is designed for use only in the country where it was purchased.  
Technical Support Calls  
FOR USERS IN UNITED STATES  
If you have read this manual and tried the troubleshooting procedures and you  
are still having difficulty, please contact the dealer from which the unit was  
purchased.  
You may also call the end user technical support telephone number which is  
operational during East Coast business hours (9:00 AM to 5:00 PM).  
The end user technical support telephone number is 1-800-PANASYS.  
This number is available within the U.S. only.  
The serial number of this unit may be found on the  
label located at the bottom of the unit. Write down this  
number below and keep this book along with your proof  
of purchase to serve as a permanent record of your  
purchase or for future reference.  
Serial number  
For warranty service you may be required to show your  
purchase records.  
Model No. KXL-CB30AU  
Name of Dealer  
Serial No.  
Date of Purchase  
Panasonic Digital Document Company  
Unit of Matsushita Electric Corporation of America  
Two Panasonic Way, Secaucus, New Jersey 07094  
C 2003 Panasonic Communications Co., Ltd.  

Toshiba Computer Drive SD M1612 User Manual
TomTom CK 7W User Manual
Sony USM4GJX User Manual
Seagate Pulsar2 ST100FM0052 User Manual
Samsung SGH X150C User Manual
Samsung SGH A257 User Manual
Samsung SCH a670 User Manual
Sagem 929 User Manual
Saeco Coffee Makers Coffee Maker V spresso User Manual
Philips CT5888 User Manual