Operating Instructions Part 1
Before operating this equipment please read these instructions
(parts 1 and 2) completely.
Contents
ii
Getting Started
Some services described in this manual are network dependent or may only be available on a subscription basis.
Some functions are SIM dependent. For more information contact your service provider.
Inserting and removing the SIM
The SIM is inserted into the back of the phone.
(See “Attaching and removing the battery” below to remove or attach the battery.)
Inserting the SIM
Removing the SIM
Slide your SIM card (with the
gold contacts facing
Slide out the SIM.
downwards) into its holder,
making sure that the cutout
corner is aligned.
SIM
SIM
NOTE If you are upgrading your phone and your previous phone did not support new services, such as
MMS (Multi Media Messaging), you may need to insert a new SIM. Contact your service provider.
Attaching and removing the battery
Before removing the battery, ensure that the phone is switched off and the charger is disconnected from the
phone.
Attaching the battery
1 Insert the battery, ensuring the 3 gold contacts
align with the 3 gold pins in the phone.
2 Replace cover on the phone and slide upwards
to the top of the phone.
Removing the battery
1 Press top part of the cover and remove.
2 Lift the battery out.
1
Getting Started
Charging the battery
Connecting and disconnecting the Fast Travel Charger
The battery must be attached in the phone before the charger is connected.
Do not force the connector as this may damage the phone and/or the charger.
Connect the charger to the mains power supply. When the phone is charging, the charging indicator will light and
a scrolling icon will appear in the main display.
When charging is complete switch off the mains power supply and disconnect the charger by pressing the button
on the connector
and remove from the base of the phone
.
Operation of battery level indicator
While charging
Charging complete
Charging Indicator will go out when charging is completed.
Low battery power warning
When the battery power is low, a warning tone will sound and a Battery low message will be displayed. Charge
the battery, or the phone will be switched off in 2 minutes. (See “Charging the battery” above.) Calls can be made
and received while the phone is charging.
Some settings may be lost if the battery is removed or remains discharged for more than 1.5 hours.
2
Keys & Displays
Speaker
Earpiece (Receiver)
Main Display
One Push Auto Open
button
Press to open the handset
Navigation key
Select/scroll/move/
Alert mute/Keyguard
Left Soft key
Right Soft key
Multi Function key
Camera/Shutter/Alert mute
Personal Handsfree
Connector
Send key
To answer a call or to
make an outgoing call
Power/End key
Press and hold to switch your
phone on/off
1 key/Voicemail key
Press and hold to call
voicemail
International Dialling
Prefix key
Asterisk key
Pause key/
Quiet Mode key
Charging Connector
Microphone
Camera Lens
Self-Portrait Mirror
Watch yourself
Infrared Port
when taking a self-portrait
Illumination Light/
Charging Indicator
Lights red during charging
3
Keys & Displays
Keys
Key
Function
Navigation key: Select and save settings, and scroll/move through menus, text and
Contacts. Also serves as shutter button for the camera and to control movements while
playing games.
Select key: Press centre to select option or to save.
Keyguard key: From Idle mode, press and hold to lock the keypad, or press
to unlock the keypad.
<
0
Alert Mute key: Turns ring tone off and stops vibration when receiving a call
(Alert mute).
Scroll key: Press top or bottom edge to move screen cursor up or down.
4
Move key: Press left or right edge to move screen cursor left or right.
2
Left Soft key: Perform function displayed in lower left corner of the display. From Idle
mode, press to open Messages menu.
A
@
Right Soft key: Perform function displayed in lower right corner of the display. Mainly
used to cancel and return to previous menu level or to delete text/number entries. Press
and hold to delete all characters in text entry mode. From Idle mode, press to open
Browser menu.
Send key: Make a call, recall recently dialled phone numbers or answer a call.
C
D
Power/End key: Press and hold to switch phone on/off. When the phone is on, press
briefly to end a call. During key operation, press to return to Idle mode.
$
1 key/Voicemail key: Press and hold $to retrieve voicemail messages.
to
1-9 Number keys: Enter numbers. Press and hold a single key (2-9) for Speed dial. In
text entry mode, enter text, numbers and characters.
,
0 Number key: Enter number. In text entry mode, enter number and characters.
#
"
International Dialling Prefix key: Press and hold #to enter + (the international
dialling prefix) while entering a phone number.
Asterisk key: During text entry mode, press to switch between upper case and lower case
letters. Changes Input mode (Hold).
Pause key: Press and hold to enter a pause (P) while entering a phone number.
In text entry mode, press to enter a space. Press and hold to enter a line feed.
!
Quiet Mode key: From Idle mode, press and hold to turn Quiet profile on/off.
Multi Function key (located on the left side of the phone): Press to enter camera
mode, then press again to take a picture.
Turns ring tone off and stops vibration when receiving a call (Alert mute).
4
Keys & Displays
Shortcuts
When you are familiar with the menu system, you can use the keypad to access features instead of navigating
through the display menus.
Short press (from Idle mode)
Key
Function
Messages
Key
Function
Call dial field
Aor 7
@or 3
$- #
"!
Browser
C
Dialled numbers
Menu/Alert mute/
Keyguard off
<
Camera/Alert mute
1
5
Shortcuts
Contacts
Long press (from Idle mode)
Key
Function
<
Keyguard on
Voicemail
$
%- ,
!
Speed dial
Quiet mode on/off
Illumination light
Luminous
colour
Function
Light goes out
Incoming call
Purple
Blue
if call is missed (Yellow) or switched over to voice call (Blue)
if call ended
Call in progress
Mobile phone status: Closed
if phone is opened or the Multi Function key is pressed
Mobile phone status: Open
Missed call notification
Yellow
if phone is closed or any key is pressed
Mobile phone status: Closed
if phone is opened or the Multi Function key is pressed
Mobile phone status: Open
Message notification
(SMS or MMS or WAP
Push)
Green
Red
if phone is closed or any key is pressed
Alarm notification
after alarm is ended (30 seconds) or any key is pressed
5
Keys & Displays
Display
Icon
Meaning
Main display
Car profile is active
SMS message storage area is full
MMS message storage area is full
Java™ (Suspended)
Unread SMS message
Unread MMS message
Unread WAP push message
Call Diverts is on
With some operations, the display automatically
clears after 2.5 seconds or after pressing any key.
Status icons
Different icons are shown, depending on the features
you are using and the options you have selected.
Icons appear on the main display as shown in the
following table.
Infrared is active
New voicemail message received
Incoming Volume 0
Icon
Meaning
Signal strength
The more bars visible, the stronger
the signal.
Vibration Alert is on
Battery charge level
Battery is charging
GPRS is active
Alarm is set
On-line browsing during CSD
(Non-Secure)
On-line browsing during CSD
(Secure)
On-line browsing during GPRS
(Non-Secure)
Quiet profile is active
Meeting profile is active
Outdoor profile is active
On-line browsing during GPRS
(Secure)
Keyguard is on
6
How to Use This Phone
Selecting a menu option
From Idle mode, press the centre of the Navigation key
display has 9 options.
to open the main menu display. The main menu
<
Main menu
Press to perform
function displayed in
the lower left corner.
Pressto Cancel/Exit
or to perform
function displayed
in lower right corner.
Main menu screen
7
How to Use This Phone
Symbols used in this manual
The table below shows the symbols used throughout these instructions and the corresponding meanings in the
column on the right.
Symbol
Meaning
<
Press centre of the Navigation key to select option or to save
1537
0
Direction in which you can move on the display screen with the Navigation key
Shows possibility of moving in any direction (up, down, left and right) on the display
screen with the Navigation key
4
2
Shows possibility of moving up and down on the display screen with the Navigation key
Shows possibility of moving left and right on the display screen with the Navigation key
Press Left Soft key
A
@
Press Right Soft key
</A
$- #
"
!
C
Press centre of Navigation key or Left Soft key
Press Number keys
Press Asterisk key
Press Pause key / Quiet Mode key
Press Send key
D
Press Power / End key
E
Indicates that a function is SIM dependent
Indicates that a function is network dependent
Press Multi Function key
F
8
Phone Basics and Managing Calls
Switching phone ON/OFF
Press and hold Dfor 3 seconds to switch phone on
•
When the phone is switched on, a greeting may be displayed
and the phone enters Idle mode.
Press and hold Dagain to switch phone off
When switching the phone off, use only Dto avoid damaging the phone.
Displaying menu
1 To access the menu, press <in Idle mode
2 The menu will be displayed
(The menu may vary depending on your SIM.)
Making calls
•
To make a call, start in Idle mode.
•
Ensure network name and appear on the display.
Standard dialling
1 Enter phone number (#- ,, ", !)
2 C/ <
Contacts dialling
2 4required contact C
Recent number dialling (Calls made or received)
1 C
2 2Dialled numbers, Answered calls or Missed calls
3 4required contact C
9
Phone Basics and Managing Calls
International dialling
The international code for the destination country/region should be entered, followed
by the area code and phone number.
1 Press and hold #
2 Enter country/region code
3 Enter area code and phone number C/ <
NOTE Many countries/regions include an initial “0” in the area code. This
should, in most cases, be omitted when dialling international numbers. If
you have difficulties making international calls, contact your service
provider.
Emergency call
To make an emergency call, the antenna ( ) must be present.
When SIM is inserted:
Enter emergency number 112 C/ <
When SIM is not inserted:
Enter emergency number 112 C/ </ A
or
1 A
2 4SOS </ A
Most countries support the international emergency number 112. If you find the
number does not work on your phone, please call your service provider.
Making emergency calls without a SIM is country or network operator
dependent.
Answering calls
Press any key except D/
/ </ @(Any key answer)
NOTE Any key answer can be disabled. (See “Any key answer setting” on page
Ending/rejecting calls
D/ @or fold the phone during an incoming call to reject the call or end a call in
progress.
10
Phone Basics and Managing Calls
Voicemail
You need to subscribe to the voicemail service through your service provider before
you can retrieve voicemail messages. To check if voicemail access has been
1 When a new voicemail message is received, an alert sounds and
appears in
lower part of the display or you receive an SMS notification (depending on the
local service)
•
remains on the display until you have listened to all your voice messages.
2 Press and hold $to automatically dial your voicemail number
• If the number is not valid, contact your service provider.
3 Follow the recorded instructions for your voicemail
4 Dwhen finished
Activating Quiet mode
1 To quickly set the phone to your preset Quiet mode settings, press and hold !
2 To disable, press and hold !again
11
Phone Basics and Managing Calls
In-call options
During a call: Afor options
4required option </ A
Option
Explanation
Hold Call
Put a call on hold. To resume, A, 4Resume </ A
Access the Contacts list
From Contacts
Create SMS
Inbox (SMS)
Calendar
Access Create SMS
Access Inbox (SMS)
Access Calendar
Handsfree / Handheld
Switch to Desktop Handsfree or Handheld
Earpiece volume
During a call: 4/ 2to adjust earpiece volume
Desktop Handsfree
Desktop Handsfree allows you to have a conversation without holding the phone to
your ear.
Swapping between Handsfree and Handheld calls:
During a Handheld call:
A, 4Handsfree </ A
During a Handsfree call:
A, 4Handheld </ A
Do not hold the phone to your ear in Handsfree mode.
DTMF tones
DTMF tones can be sent during a conversation. These are often used to access
voicemail, paging and computerised home banking. For example, you may need to
input a number to remotely access voicemail messages. A phone number may be
stored in Contacts together with a DTMF tone sequence, allowing the number to be
dialled upon recall and the DTMF tone sequence to be sent automatically.
Send DTMF tones during a call:
Press digits (#- ,, !, ")
Pause dial:
Using pauses allows you to send DTMF tones automatically.
1 Enter phone number
2 Press and hold !until a P is displayed at the end of the phone number entered
3 Enter the DTMF digits after the pause, e.g. enter the number to access voicemail
messages
4 C/ <
When the call is connected the DTMF tone sequence will be sent after 3 seconds.
12
Phone Basics and Managing Calls
Incoming call while on a call
During a call, you may receive another call. To enable this, Call Waiting must be on.
Accept a second call:
C/ A(The second call is active, the current call is put on hold)
When two calls are connected, the following options are available by pressing
A
.
4required option </ A
Option
Explanation
Swap
Switch between two connected calls
Enable multi-party conversation when two calls are
Merge
connected (one active, one on hold). All three parties can
then talk to each other
From Contacts
Create SMS
Inbox (SMS)
Calendar
Access the Contacts list
Access Create SMS
Access Inbox (SMS)
Access Calendar
Handsfree / Handheld Switch to Desktop Handsfree or Handheld
Reject a second call:
@to reject the incoming call and to resume the call in progress.
End current call and receive second call:
Dto end the call in progress, then press any key except D/
/ </ @to
answer the incoming call.
Call Waiting is network dependent (F).
Making a second call
During a call:
Enter second phone number and C/ <
or
Afor options and select required contact from the Contacts list and C
•
The first call is put on hold.
Making a second call is network dependent (F).
13
Phone Basics and Managing Calls
Multi-party call
A multi-party call has 3 or more people in conversation at the same time. (F)
1 Establish a multi-party call by merging two calls
2 Continue to add people to the multi-party call (up to 5 connections in total) by
calling others or by accepting incoming calls
When making a call or accepting an incoming call, the multi-party call is placed on
hold. The callers already in the multi-party call can continue to talk with each other
while on hold. Each additional connection can then be merged into the multi-party call
by A, 4Merge </ A.
Multi-party call options
You can select an individual from the multi-party call and split the conversation,
allowing you to talk privately without the participation of the rest of the parties in the
multi-party call.
1 During a multi-party call, A
2 4Option </ A
3 4desired caller in the multi-party list
4 desired option A
5 4required option </ A
Option
Split
Explanation
Split the selected caller from the multi-party call so you can talk
privately. The remaining multi-party callers are placed on hold and
can still talk with each other. To rejoin the call, A, 4Merge </ A
Ok
Close the options list
To end the call’s connection, @(End)
6 Dto end the multi-party call and all connections
14
Phone Basics and Managing Calls
Call log
Recently dialled phone numbers, answered calls and missed calls are stored in the
Call log. The numbers in the Call log list can be used to call, send messages or add
to Contacts. You can also delete the numbers from the list.
Viewing Call log
1 C
2 2Dialled numbers, Answered calls or Missed calls
3 4required phone number <
Dialling from Call log
1 C
2 2Dialled numbers, Answered calls or Missed calls
3 4required phone number <
4 A
5 4Call </ A
Sending messages
1 C
2 2Dialled numbers, Answered calls or Missed calls
3 4required phone number <
4 A
5 4Send message </ A
6 4MMS or SMS </ A
7 Enter a message
15
Phone Basics and Managing Calls
Saving a phone number from Call log into the Contacts list
1 C
2 2Dialled numbers, Answered calls or Missed calls
3 4required phone number <
4 A
5 4Add to contacts </ A
6 4Phone or SIM </ A
7 4required icon <
8 Enter as appropriate <
(If required, repeat steps 7 and 8)
9 A
Options in Call log
In each Call log list, the following options are available by pressing A.
4required option </ A
Option
Explanation
Call
Call selected number
Send message
Add to contacts
Delete
Send MMS/SMS message to selected number
Store number to Contacts
Delete selected log
Delete all logs in the list
(This option is available in the Call log list.)
Delete all
16
Explore the Menus
Games
Games
Download
Settings
My Media
Pictures
Sounds
Shortcuts
Text templates
Memory status
Applications
(SIM Tool Kit)
Alarm
Sound recorder
Calculator
Infrared
Browser
PANASONIC BOX
Messages
Create new
Inbox
Camera
Archive
Voicemail
(Chat)
Cell Broadcast
Settings
Memory status
Settings
Profiles
Sound
Vibration Alert
Display
Language
Data connections
GSM network
Calls
Contacts
Contacts list
Add contact
Call log
Speed Dial list
View groups
Advanced
Security
Calendar
(Service numbers)
Time and date
Any key answer
Keyguard
SIM Tool Kit and Service numbers are SIM dependent (E).
Chat is network operator dependent.
17
Settings Menu Structure
Normal
Quiet
Meeting
Outdoor
Car
Profiles
Sound
Incoming Tone
Incoming Volume
Message Tone
Message Volume
Key Tone
On
Off
Vibration Alert
Display
Key Volume
Warning Tone
Wallpaper
Colour Theme
Brightness
Backlight time
Key Backlight
Display language
Input language
Language
Settings
Data connections
New Search
Select Network
Search Mode
GSM network
Calls
Call Diverts
Call Waiting
Send my number
Call Duration
(Service Charge)
PIN entry
Security
Change PIN2
Fixed Dial
Call Barring
Time
Date
Time and date
Any key answer
On
Off
Keyguard
Service Charge is SIM dependent (E).
18
Settings
Profile setting
You can switch between five profiles in your phone, each with a distinct combination
of ring tone, ring volume, etc.
Settings
Profiles are set up for use in different environments – for instance you might want to
create a Quiet profile, a Meeting profile with a ring tone appropriate for formal
occasions and an Outdoor profile for noisy environments.
Within each profile, distinct melodies can be set as incoming call and message alerts.
Profiles
Activating a profile
From Profiles menu
1 4required profile A
2 4Activate </ A
or
1 4required profile <
Editing profile
Incoming Tone
From Profiles menu
1 4required profile A
2 4Edit </ A
3 4Incoming Tone </ A
4 4Preinstalled, My Media or Download </ A
5 4required data </ A
Incoming Volume
From Profiles menu
1 4required profile A
2 4Edit </ A
3 4Incoming Volume </ A
4 4/ 2adjust the volume level (0 - 4) </ A
Message Tone
From Profiles menu
1 4required profile A
2 4Edit </ A
3 4Message Tone </ A
4 4Preinstalled, My Media or Download </ A
5 4required data </ A
19
Settings
Message Volume
Settings
From Profiles menu
1 4required profile A
2 4Edit </ A
3 4Message Volume </ A
4 4/ 2adjust the volume level (0 - 4) </ A
Profiles
Key Tone
From Profiles menu
1 4required profile A
2 4Edit </ A
3 4Key Tone </ A
4 4required tone type </ A
Key Volume
From Profiles menu
1 4required profile A
2 4Edit </ A
3 4Key Volume </ A
4 4/ 2adjust the volume level (0 - 4) </ A
Warning Tone
From Profiles menu
1 4required profile A
2 4Edit </ A
3 4Warning Tone </ A
4 4On or Off </ A
Vibration Alert
From Profiles menu
1 4required profile A
2 4Edit </ A
3 4Vibration Alert </ A
4 4On or Off </ A
20
Settings
Tone setting
You can set ring tone, ring volume, etc.
Settings
The ring tone can be changed to one of the tones from Preinstalled, My Media or
Download. Incoming tone and Message tone can have different ring tones and
volume assigned.
Ring volume increases in steps to the level you selected. Keep in mind that the
speaker located next to the receiver may sound too loud when the phone is held to
your ear.
Sound
Changing Incoming Tone
From Sound menu
1 4Incoming Tone </ A
2 4Preinstalled, My Media or Download </ A
3 4required data </ A
Setting Incoming Volume
From Sound menu
1 4Incoming Volume </ A
2 4/ 2adjust the volume level (0 - 4) </ A
Changing Message Tone
From Sound menu
1 4Message Tone </ A
2 4Preinstalled, My Media or Download </ A
3 4required data </ A
Setting Message Volume
From Sound menu
1 4Message Volume </ A
2 4/ 2adjust the volume level (0 - 4) </ A
Setting Key Tone
From Sound menu
1 4Key Tone </ A
2 4required tone </ A
21
Settings
Setting Key Volume
Settings
From Sound menu
1 4Key Volume </ A
2 4/ 2adjust the volume level (0 - 4) </ A
Setting Warning Tone
From Sound menu
Sound
1 4Warning Tone </ A
2 4On or Off </ A
Vibration
Alert
Vibration Alert setting
Vibration Alert can be set to indicate an incoming call and a received message.
From Vibration Alert menu
4On or Off </ A
22
Settings
Display setting
Setting Wallpaper
Settings
From Display menu
1 4Wallpaper </ A
2 4Preinstalled, My Media or Download </ A
3 4required data
Display
4 To view and save, press <then </ Ato save
or
To save without viewing, press A
Display Colour,
Brightness,
Wallpaper,
Setting Display Colour Theme
From Display menu
Backlighttimeand
Key Backlight can
be changed.
1 4Colour Theme </ A
2 4required colour </ A
Setting Display Brightness
From Display menu
1 4Brightness </ A
2 4adjust the brightness level (1 - 5) </ A
Setting Backlight time
From Display menu
1 4Backlight time </ A
2 4required time </ A
The backlight goes out, then display is turned off in 1 minute.
Setting Key Backlight
From Display menu
1 4Key Backlight </ A
2 4On or Off </ A
23
Settings
Language setting
You can change the language used for display messages and/or text entry.
Settings
From Language menu
1 4Display language or Input language </ A
2 4required language </ A
Language
Data connections setting
GPRS settings and CSD settings are stored in the Data connections menu.
Data can be sent/received using GPRS or CSD technology.
Data
connections
Network setting
Changing to a new network
GSM
network
The New Search function is used to manually select a network that is available
in your current location.
From GSM network menu
1 4New Search </ A
2 4required network </ A
Select Network
National
regulations may
not permit
roaming in your
home region.
View available networks.
From GSM network menu
1 4Select Network </ A
2 4required network A
NOTE MCC (Mobile Country Code) / MNC (Mobile
Network Code) will appear on the display.
24
Settings
When the Search Mode is set to Automatic the phone will automatically reselect a
new network in order to maintain optimum network availability. The network list is
used when the Search Mode is set to Automatic. The location numbers in the
preferred network list show the search priority.
Settings
You can amend the list as follows:
Option
Explanation
GSM
network
Add
Store a new network at the end of the list
Store a new network in the currently displayed location and
move other networks down
Insert
Edit
Overwrite the old network with a new one
Delete the network you have selected
Delete
National
regulations may
not permit
roaming in your
home region.
Search Mode
You can set your phone to automatically or manually search for the other networks
when roaming.
From GSM network menu
1 4Search Mode </ A
2 4Automatic or Manual </ A
When the Search Mode is set to Manual the phone will only use
a selected network.
If coverage is lost another network should be manually selected.
25
Settings
Call settings
Call Diverts
Settings
Voice, fax, and data calls can be diverted to different numbers in different situations.
For example, you may want to divert voice calls to voice mail when the phone is
switched off.
To register a number to divert at first time:
Calls
From Calls menu
1 4Call Diverts </ A
2 4Divert Voice, Divert Fax or Divert Data </ A
3 4the circumstances to initiate the divert A(Options)
4 4On </ A
5 4Direct input or From Contacts </ A
6 When you select Direct input, enter phone number to divert
<
(
If you select
Aafter entering phone number, 4Ok </ A)
or
When you select From Contacts, 4required contact from the Contacts list A
Request of Call Diverts will be sent to network.
Entered phone number will be registered in the network. From next time, incoming
calls will be diverted to the registered number.
•
•
•
•
To cancel the registered phone number, 4Off on step 4.
To cancel all the registered phone number, 4Cancel all on step 2.
To confirm the status of Call Diverts, 4Status on step 4.
To confirm all the status of Call Diverts, 4Status all on step 2.
26
Settings
To change the registered number to divert:
Settings
From Calls menu
1 4Call Diverts </ A
2 4Divert Voice, Divert Fax or Divert Data </ A
3 4the circumstances to initiate the divert A(Options)
4 4On </ A
5 4Direct input or From Contacts </ A
6 When you select Direct input, enter phone number to divert <
(If you select Aafter entering phone number, 4Ok </ A)
or
Calls
When you select From Contacts, 4required contact from the Contacts list A
Request of Call Diverts will be sent to network.
NOTE When a divert situation is enabled the divert icon (
) is displayed.
Call Diverts settings
Settings
All calls
Explanation
Divert all incoming calls
When busy
Divert incoming calls when a call is in progress
Divert incoming calls if call is not answered
(This setting is available only when Divert Voice is
selected.)
When no reply
When unreachable
Divert incoming calls when phone is disconnected
This function is network dependent (F).
Call Waiting
If Call Waiting is switched on a second call can be received.
From Calls menu
1 4Call Waiting </ A
2 The current status, “Call Waiting deactivated” or “Call
Waiting activated” is displayed
To accept the current status, <
(If you select A, 4Ok </ A)
or
To change the setting, AActivate or Deactivate </ A
This function is network dependent (F).
27
Settings
Send my number
Settings
You can set whether or not to show your phone number to another phone (Caller ID).
From Calls menu
1 4Send my number </ A
2 4Network set, On or Off </ A
Calls
Call Duration
Displays the duration of incoming or outgoing calls.
From Calls menu
1 4Call Duration </ A
2 4Incoming or Outgoing </ A
To reset counter, <x 2 / Ax 2
Service Charge
You can check the charges for your calls.
From Calls menu
4Service Charge </ A
The following can be set.
4required option </ A
Option
Explanation
Cost Left
Call Meter
Show how much cost is left
Show the total costs of calls made
Show the cost that the service provider charges for one unit of call
time
Price/Unit
Max Cost
Set the maximum cost of calls made
NOTE The duration of one unit may vary during day, peak and off-peak times.
Call charges can be calculated accordingly. However, the call charge
information may not give an accurate reflection of the actual tariffs
charged by your service provider.
This function is SIM (E) and network (F) dependent.
28
Settings
Security settings
The PIN protects your SIM against unauthorised use. If you enable the PIN, every
time the phone is switched on, you will be prompted to enter the PIN code.
The PIN2 controls security for the Fixed Dial store.
Settings
PIN entry (Enabling/Disabling PIN entry)
From Security menu
Security
1 4PIN entry </ A
2 4Enable/Disable </ A
3 4Enable or Disable </ A
4 Enter the PIN code (4 - 8 digits) </ A
If PIN is entered
incorrectly 3 times
the phone will be
locked, and you
will need to enter
the PUK code. If
PIN2 is entered
incorrectly 3 times
SIM will be
locked, and you
will need to enter
PUK2 code. If the
PUK code is
Change PIN
From Security menu
1 4PIN entry </ A
2 4Change PIN </ A
3 Enter the current code </ A
4 Enter the new code </ A
5 To verify the new code </ A
You can change the PIN when PIN entry is set to Enable.
entered
incorrectly
10 times, the
Change PIN2
phone will cease
to operate
permanently.
From Security menu
1 4Change PIN2 </ A
2 Enter the current code </ A
3 Enter the new code </ A
4 To verify the new code </ A
All information
stored in the SIM
will be lost and the
SIM will need to
be replaced.
Contact your
service provider
for more
This is SIM (E), service provider and network (F) dependent. (Please
contact service provider to get more information for PIN2 code.)
information.
29
Settings
Fixed Dial
Settings
Fixed Dial is a part of Contacts, but with added security.
When Fixed Dial is enabled:
Only numbers that are in the Fixed Dial store may be dialled.
Any manually dialled phone numbers must match a number already in the Fixed
Dial store.
If you store, edit or delete a phone number, you have to enter your PIN2 code.
From Security menu
Security
1 4Fixed Dial </ A
2 4Enable or Disable </ A
3 Enter the PIN2 code (4 - 8 digits) </ A
This is SIM (E), service provider and network (F) dependent. (Please
contact service provider to get more information for PIN2 code.)
Call Barring
Call Barring restricts certain outgoing and/or incoming calls using a password
supplied by your service provider. When updating/checking the status of Call Barring,
the phone must be registered on a network.
Varying call restrictions can be used for voice calls.
From Security menu
1 4Call Barring </ A
2 4required setting from the table shown below A
(When you select <, enter password (4 digits) </ A)
3 4On, Off or Status </ A
4 When you select On or Off, enter password (4 digits) </ A
You can skip steps 3 and 4 if you enter your password in step 2.
Call Barring settings
Settings
Explanation
Bar outgoing calls
Bar foreign calls
Outgoing calls are barred
International outgoing calls are barred
Bar foreign calls except
Home
International outgoing calls except home are barred
Bar incoming calls
Bar incoming if abroad
Cancel all
Incoming calls are barred
Roaming is barred if abroad
Cancel all call bar settings
Call bar status is displayed
Change call bar password
Status all
Password
30
Settings
Time and date setting
From Time and date menu
Settings
1 4Time </ A
2 #- ,to enter the time using 24 hour clock </ A
3 4Date </ A
4 #- ,to enter the date </ A
Time
and date
Some settings may be lost if the battery is removed or remains discharged for
more than 1.5 hours.
Time and date
can be shown on
the top of the
display when in
Idle mode.
Any key answer setting
Calls can be answered by pressing any key except D/
When any key answer is set to off, calls can only be answered by pressing Cor A.
Any key
answer
/ </ @.
From Any key answer menu
4On or Off </ A
31
Settings
Keyguard setting
Keyguard stops the keys from performing their normal function if accidentally
Settings
pressed. When Keyguard is enabled, “
” appears on the display. When a call is
received, Keyguard is temporarily disabled and you can answer the call.
Setting Keyguard
From Keyguard menu
Keyguard
1 “Would you like to lock keypad?” </ A
or
From Idle display
1 Press and hold <
2 “Would you like to lock keypad?” </ A
Emergency calls can still be made with the Keyguard enabled but there will be
no indication that you are dialling a number.
Disabling Keyguard
When “
” appears on the display
1 <
2 “Would you like to unlock?” </ A
32
Camera
Taking a picture
Camera
The camera range is 35 cm -
The minimum illumination required is 5 lux.
.
From Camera menu
<or
to capture the image
To store the image in My Media: (After capturing the image)
A
or
(Available only when the phone is open)
The picture will be saved in My Media / Pictures / Stored pictures.
To return to camera operation without storing the image:
You can take
(After capturing the image)
pictures with the
built-in camera,
send them in an
MMS (multimedia
message) or by
Infrared and use
them as Wallpaper.
@
NOTE If you press <after capturing image, the picture can be attached to
Adjusting the brightness level
You can also attach
a picture to a
While view finder is active, you can adjust the brightness.
contact in your
Contacts list.
3to increase the brightness
7to decrease the brightness
Picture brightness indicators:
Brighter
Normal
Darker
Options in view finder
The following options are available by pressing A.
4required option </ A
Option
Explanation
Twilight mode Improve picture taken in low light conditions (On, Off)
Anti-flicker
Image size
Reduce flickering in view finder (mode 1: 50 Hz, mode 2: 60 Hz)
Change image size
(640 x 480 pixels, 352 x 288 pixels, 160 x 120 pixels)
When taking a picture, flickers may appear in certain environments.
33
Camera
Saving and using pictures
Camera
Once a picture has been taken it will be saved in My Media. To use a saved picture
NOTE When My Media is full, pictures can be saved if you make space by
deleting files (pictures, sounds and text templates). Press Ato delete
unwanted files.
Incoming calls during camera operation
If an incoming call etc, is received during camera operation, the phone will exit the
camera mode and switch to the incoming call etc.
The captured image will not be saved.
Self-portrait
You can take your self-portrait. Look at yourself in Self-Portrait Mirror and press <
or
to take a picture.
You can also activate the camera mode and take a picture by pressing
your phone closed.
with
Viewing pictures
Pictures taken by the camera are created as JPEG image files. JPEG is standardised
image compression format. JPEG image files can be viewed with most general
image viewers and editors as well as with an Internet browser.
NOTE Do not leave the phone with the camera facing direct sunlight to avoid
impairing camera performance.
If the camera is left in the preview mode or a captured picture is
displayed the phone will automatically return to Idle mode or the main
menu in 3 minutes. If left in preview mode, but with the options menu
displayed, the phone will remain in this state and will not return to Idle
mode.
34
Text Entry (Edit)
You can use alphanumeric characters to enter details into Contacts, to create text, email messages, etc.
Text mode
®
Numeric
(Input mode
indicator:
0-9)
T9
Multi-tap
(Input mode indicator:
Abc, ABC or abc)
Key
(T9 , T9 or T9)
(Input language:
English)
#
$
Alternatives
, - ? ! ’ @ : ; / 1
/ (Hold) Character list
. @ /
-
_
+ 0
0/ (Hold)+
1
.
*
.,?1!”-:; @ / * ( ) # + _ = [ ] { } ’ ¡ ¿ & % \ ^ ~ | < >
£ $ ¥ ¤ § Space ↵ / (Hold) Character list
¢
%
&
'
(
)
*
+
,
A B C 2
D E F 3
G H I 4
(a b c 2)
(d e f 3)
(g h i 4)
(j k l 5)
A B C 2 Γ Á Ä Å Æ Ç
D E F 3 ∆ É
(a b c 2 α β γ á ä å æ à
(d e f 3 δ ε ζ é è
(g h i 4 η θ ι ì í
(j k l 5 κ λ µ
(m n o 6 ν ξ ó ñ ö ø ò
(p q r s 7 π ρ σ ß
(t u v 8 τ υ φ ú ü ù
(w x y z 9 χ ψ ω
)
2
3
4
5
6
7
8
9
)
G H I 4 Θ Í
)
J K L 5
J K L 5 Λ
)
M N O 6
P Q R S 7
T U V 8
W X Y Z 9
(m n o 6)
(p q r s 7)
(t u v 8)
(w x y z 9)
M N O 6 Ξ Ñ Ó
P Q R S 7 Π Σ
T U V 8 Φ Ú
Ö Ø
)
)
Ü
)
W X Y Z 9 Ψ Ω
)
* / (Hold) Input
mode
"
Shift / (Hold) Input mode
Space / (Hold) Line feed
Shift / (Hold) Input mode
# / (Hold) Line
feed
!
@
Space * # / (Hold) Line feed
Delete text / (Hold) Delete all characters
®
Displayed characters in the T9 mode vary depending on the selected input language.
Shift mode
Shift mode change
The Shift mode changes by pressing (within 1 sec) ".
Multi-tap
Tegic
Abc -> ABC -> abc
T9 -> T9 -> T9
If Input mode is changed, Shift mode is initialised.
Auto capital change
Auto capital affects Abc and T9
.
If Input mode is changed to Abc or T9 , the first character is input as upper case and subsequent letters as lower
case. (Input mode indicator changes to abc or T9.)
If these characters [. (Period) or ! or ?] are input, the next character is input as upper case.
(Input mode indicator changes to Abc or T9 .)
35
Text Entry (Edit)
Input mode
Input mode change
Input mode changes by pressing and holding (over 1 sec) ".
Input mode
Multi-tap -> Numerals -> T9 (Selected tegic language)
(Abc -> 0-9 -> T9
)
The phone keeps the selected input mode.
Text input
T9®
Using this mode of text input dramatically reduces the number of key presses required:
Press a key once for any letter you require on that key. The desired letter may not be displayed. Continue
pressing other keys until the end of a word is reached, then check that the word has been typed correctly before
continuing on to the next word. If the combination of letters typed has produced a word which is not the one you
require, press #, 1or 5repeatedly until the correct word is displayed. Continue to the next word.
Example of text input in T9 mode
To type a new message, follow these steps:
1
2
3
At the beginning of a new message press and hold @(Clear) to delete previous text, if necessary.
Press "(Shift) to change letter case, if necessary.
Press %%((.
“Call” is displayed.
Note that the displayed words change as you type, always type to the end of the word before editing.
®
T9 languages can be selected from T9 Input, in options A 4Input language </ A
If the word you require is not in the internal dictionary, it should be entered using the Multi-tap (Abc) mode.
T9 user’s dictionary
Words that you entered are all saved in the user’s dictionary so that they are suggested next time.
Other text modes
Select text mode (displayed in top right corner on screen)
Multi-tap mode (Abc, ABC or abc):
Each time a key is pressed in quick succession, the next character available on that key is displayed. Releasing
the key or pressing another key enters the character displayed. The cursor moves to the next position.
In T9 (T9 ) or Multi-tap (Abc) mode, the first entered letter in a sentence is in upper case.
36
Messages
MMS (Multimedia Messaging Service)
Your phone is designed to be compatible with certain Multimedia Messaging
Services (MMS). You can send pictures and music with text messages. The recipient
can play it as a slide show.
Messages
MMS messages can be sent to another mobile phone with MMS capability or to an
email address.
When you receive an MMS message, a notice will inform you that you have received
An MMS profile may already have been set when you purchased your phone. To
with the Left Soft key (A) or the Left key (7).
Create new
Creating a new MMS
From Create new menu
This phone has
various
messaging
featuresincluding
SMS and MMS.
1 4MMS </ A
When creating a message, the following menu is available.
Menu item
Add picture
Add text
Explanation
Select a picture stored in Stored pictures / Download / Take
new picture and insert it into the MMS message
Create text and add to MMS message
Select sound stored in Stored sounds / Download / Record
new sound and add to MMS message
Add sound
2 After selecting a picture or sound or entering text, press Afor the following
options
4required option </ A
Option
Edit text
Listen
Explanation
Edit the text when selecting added text
Listen to the sound when selecting added sound
Send MMS after entering the subject and recipient number or
address
Send
Remove picture/
text/sound
Remove from the MMS
Preview MMS as a slide
Preview slide
38
Messages
Creating a slide
Messages
In order to send an MMS with more than one picture, text or sound, you need to add
new slides to the MMS.
From Create new menu
1 4MMS </ A
2 4Add picture, Add text or Add sound </ A, then select a picture or
Create new
sound, or enter a text
3 4Slides <
Slide option
While Slides is highlighted, the following options are available by pressing A.
4required option </ A
Option
Explanation
Add new
Add slide
Send MMS after entering the subject and recipient number
or address
Send
Slide duration
Remove slide
Preview slide
Specifies duration of slide
Remove slide from the MMS
Preview MMS as a slide
39
Messages
Sending a message
Messages
When a message is completed, press A
1 4Send </ A
2 4Add subject <
3 Enter subject <
4 4Add recipient <
5 4From Contacts, Enter number or Enter address </ A
Create new
6
When you select From Contacts, 4required contact A
or
When you select Enter number, enter number </ A
or
When you select Enter address, enter address
<
7 4Send <
Before sending a message, the following options are available by pressing A.
4required option </ A
Option
Explanation
Add subject /
Add recipient
Add subject to MMS message / Add recipient to MMS
message
Edit
Edit the subject or the recipient
Remove address
Remove address
Edit slide
Send
Transit to “Slide” screen where you can edit slide
Send MMS
Preview MMS
Save
Preview MMS message
Save MMS message to Drafts box
Set send options
Create options
Creating options
Before sending a message, you can set send options.
When a message is completed, press A
1 4Send </ A
2 Afor the options
3 4Create options </ A
4 4required option </ A
Option
Explanation
Request read
Ask if the other party read the message
Request delivery Check if your message has been delivered to the other party
Duration for which your message is stored at the message
centre.
Validity Period
Delivery attempts will be repeated until the message has
been delivered or Validity Period expires.
Priority
Set the priority to normal, low or high
Delivery time
Specifies delivery time of a message to be sent
40
Messages
Receiving messages
Messages
When you receive an MMS message, the message icon (
with a tone, illumination, and/or vibration.
) is displayed along
From Inbox menu
1 4MMS </ A
2 4required notification <
The following options are available by pressing A.
4required option </ A
Inbox
Option
Receive
Reject
Explanation
Receive new message
Delete message from the server and delete notification
Call sender’s number
Call
Delete all
Properties
Delete all MMS messages in Inbox
Show message details (such as message size and date)
Reading a received message
From Inbox menu
1 4MMS </ A
2 4required message <
When viewing the list, the following options are available by pressing A.
4required option </ A
Option
Explanation
Reply
Create reply message
Create reply message to the sender and all recipients of the
message
Reply to all
Forward
Call
Forward MMS message
Call sender’s number
Contact
Delete
Store sender’s phone number or email address in Contacts
Delete MMS message
Delete all
Properties
Delete all MMS messages in Inbox
Display message properties
41
Messages
Viewing message lists
Messages
The following messages are stored in Archive.
Outbox: When a message has been sent it is stored in the Outbox.
Unsent: Undelivered messages are stored in Unsent.
Drafts: Use to create a message draft.
MMS Drafts: Messages that are saved in the MMS mode are saved in Drafts.
If the transmission of an MMS message fails, the message is stored in Unsent
together with other saved messages.
Archive
From Archive menu
1 4MMS </ A
2 4required list </ A
In each list, the following options are available by pressing A.
4required option </ A
Outbox
Option
Edit
Explanation
Edit MMS messages
Forward
Delete
Forward MMS messages
Delete MMS messages
Delete all MMS messages in Outbox
Display message properties
Delete all
Properties
Unsent, Drafts
Option
Explanation
Edit
Edit MMS messages
Send
Send MMS messages
Delete
Delete MMS messages
Delete all MMS messages in Unsent or Drafts
Display message properties
Delete all
Properties
42
Messages
Setting the MMS message server / profile
Messages
MMS message server and profile setting must be done before you can send or
receive an MMS message. Please check with your network operator if additional
settings are required. You can select one of five server URLs on the phone.
From Settings menu (Message server)
1 4MMS </ A
Settings
2 4Advanced </ A
3 4Message server </ A
4 4required message server <
5 Enter URL <if you need
From Settings menu (Profile)
1 4MMS </ A
2 4Advanced </ A
3 4Profile </ A
4 4select profile </ A
NOTE Before selecting MMS message server, you may have to set the profile
Settings - WAP profiles.
Modifying previously entered settings can cause failure of the server
setting.
Setting options
The following settings are available.
From Settings menu
4MMS </ A
Option
Reports
Priority
Explanation
Set Request read (ask if the other party read the message) / Send
read (inform the other party that you have read the message when
asked) /Request delivery (ask if the other party received the
message) /Send delivery (inform the other party that you have
received the message when asked)
Set the priority to Low, Normal or High
Duration that your message is stored at the message centre.
Delivery attempts will be repeated until the message has been
delivered or Validity Period (1 day, 7 days or Maximum) expires
Validity
Period
After receiving a message notification, the message will be sent to
Auto
you automatically (Always on). Message set to be delivered
download automatically in home area (On when home). Message will be sent
to you manually (Never).(This option is available only in Idle mode.)
Auto mode enables MMS slides to be displayed according to their
duration. Manual mode enables MMS slides to be displayed by
pressing 7/ 3
Player
mode
Set Message server, Profile, Fetch on server and Anonymous
reject, and also view Information of MMS software
Advanced
43
Messages
SMS (Short Message Service)
You can receive, display, edit and/or send text messages on any network that has a
roaming agreement. (Dependent on the recipient’s phone parameters.)
The message centre number should be preprogrammed on the SIM, changing this
Messages
Creating a text message
From Create new menu
1 4SMS </ A
Create new
2 Create text message – max. 459 characters, see “Text Entry”
on page 35
When creating text, the following options are available by
pressing A.
4required option </ A
Option
Send
Explanation
Send text as SMS messages
Send text to more than one recipient
Access to text templates in My Media
Save message in Unsent
Copy text
Send to many
Templates
Save
Copy
Cut
Cut text
Paste
Paste text
Input language Select input language
Exit Return to Create new menu
Sending a message
When you have created your message, press A
1 4Send </ A
2 Enter the destination phone number <
If you want to select from Contacts
1 4Send </ A
2 <
3 4required contact A
4 <
Before sending a message, the following options are available by pressing A.
4required option </ A
Option
Explanation
Send
Send text as SMS messages
From Contacts Select the destination phone number from Contacts
Save
Exit
Save message in Unsent
Return to “Create SMS” screen
44
Messages
Receiving messages
Messages
When you receive an SMS message, the message icon (
with a tone, illumination, and/or vibration.
) is displayed along
Reading a received message
From Inbox menu
1 4SMS </ A
2 4required message <
Inbox
When viewing messages, the following options are available by pressing A.
4required option </ A
Option
Reply
Forward
Call
Explanation
Create reply message to sender
Forward SMS message
Call sender’s number
Add to
contacts
Store sender’s number to Contacts
Call or send messages to a phone number, email address or
URL address in the message
Use detail
(This option is available only when viewing messages.)
Delete
Delete SMS message
Delete all SMS messages
(This option is available in the message list.)
Delete all
By pressing <, detail information of SMS will be shown.
45
Messages
Viewing message lists
Messages
These message lists are stored in Archive.
Outbox: When a message has been sent, it is stored in the Outbox.
Unsent: If the transmission of an SMS message fails, the message is stored in
Unsent together with other saved messages. Messages that are edited
and saved in the SMS mode are saved in Unsent.
Draft: Use to create a message draft.
Archive
SMS Draft: The last message you edit in the SMS mode is saved in the Draft.
From Archive menu
1 4SMS </ A
2 4required list </ A
In each list, the following options are available by pressing A.
4required option </ A
Outbox, Unsent
Option
Send
Call
Explanation
Send text as SMS messages
Call receiver’s number messages
Call or send messages to a phone number, email address or
URL address in the message
Use detail
(This option is available only when viewing messages.)
Delete
Delete SMS message
Delete all SMS messages
(This option is available in the message list.)
Delete all
Draft
Option
Send
Explanation
Send text as SMS messages
Send text to more than one recipient
Access to text templates in My Media
Save message in Unsent
Copy text
Send to many
Templates
Save
Copy
Cut
Cut text
Paste
Paste text
Input language Select input language
Exit Return to Archive menu
46
Messages
Setting the Message Centre number
Messages
The message centre number should be preprogrammed on the SIM, changing this
number may cause failure of a text message.
From Settings menu
1 4SMS </ A
2 4Message Centre </ A
3 Enter message centre number in international dial format (see
Settings
When the Message Centre number has been pre-installed, please do not
change the number.
Setting options
From Settings menu
1 4SMS </ A
2 4required option </ A
Option
Explanation
Message Centre
Message Type
Validity Period
Delivery report
Store sent SMS
Edit Message Centre number
Select required message type
Select maximum or choose a time limit for sent messages
Request a delivery report on the status of a sent message
Store messages to Sent SMS
47
Messages
Voicemail
Messages
Voicemail is an innovative service that lets you stay up-to-date with all of your
messages.
You must subscribe to voicemail through your service provider before you can
retrieve voicemail or email messages.
Voicemail
Listening to Voicemail messages
From Voicemail menu
4Call Mailbox </ A
Stored mailbox number is dialled and you can listen to voice messages.
Connecting to internet mail
From Voicemail menu
4Web mail </ A
Your phone is connected to the Internet via a WAP connection to retrieve email
messages.
This function is network operator dependent.
Setting the Mailbox number
From Voicemail menu
1 4Set Mailbox number </ A
2 Enter the mailbox number (when necessary) </ Ax 2
Chat
Chat lets you enjoy the fun of instant messaging wherever you are.
It’s the fun way to chat on-line.
More information on this service may be obtained from your service provider.
Chat
Viewing Chat
From Chat menu
4Follow the screen contents
This function is network operator dependent.
It allows you to
read sent and
received
messages with
another party on
one screen.
48
Messages
Cell Broadcast
You can receive messages on specified topics, such as traffic and weather
information, from your network operator.
Messages
Setting Cell Broadcast On/Off
From Cell Broadcast menu
1 4On/Off </ A
Cell
Broadcast
2 4On or Off </ A
Reading a received message
From Cell Broadcast menu
1 4Read messages </ A
2 4required message <
This function is your network operator dependent.
Options
You can add, edit and delete topics and languages.
From Cell Broadcast menu
1 4Options </ A
2 4Topic or Language </ A
3 4required topic or language A
4 4Add, Edit or Delete </ A
Memory status
You can see MMS/SMS memory status.
Memory
status
Viewing MMS/SMS memory status
From Memory status menu
4MMS or SMS </ A
The current percentage of MMS saved in Phone are displayed.
or
The current percentage of SMS saved in SIM and in Phone are displayed.
49
Contacts
Browsing Contacts
You can search Contacts by name.
Contacts
When browsing by name, pressing a letter key will take you to the first entry starting
with that letter.
From Contacts list menu
4required contact <
Contacts
list
Options in Contacts
From Contacts list menu
1 4required contact A
2 4required option </ A
Option
Explanation
Call
Call contact
Send
message
Send MMS/SMS to the selected contact from Contacts list
Edit
Edit contact
Add contact
Add contact to Contacts list
Copy to SIM/
Phone
Copy contact to SIM or Phone
Speed dial
Delete
Add to Speed Dial list
Delete contact
Search
Search contact by entering characters (max. 18 characters)
Send by
Infrared
Send contact to another device by Infrared
51
Contacts
Storing
Storing a number in SIM
Contacts
In the SIM, you can store: name, phone number.
The length of name and number and the total amount of data are dependent on your
SIM.
From Add contact menu
Phone numbers
can be stored in
your SIM or in
your phone.
1 4SIM </ A
2 4name icon (
) <
3 Enter the name <
4 4mobile icon ( ) <
5 Enter the phone number </ A
6 A
Add
contact
Options in SIM Contacts
When the name is being entered, the following options are available by pressing A.
4required option </ A
Option
Copy
Cut
Explanation
Copy letters into buffer
Cut and store letters into buffer
Paste letters from buffer
Paste
Input language Select input language
Exit Return to Add contact
52
Contacts
Storing a number in your phone
Contacts
In the phone, you can store: name, phone no. 1, phone no. 2, email address, picture
and group.
From Add contact menu
1 4Phone </ A
2 4name icon (
3 Enter the name <
4 4mobile icon ( ) <
) <
Add
contact
5 Enter the phone number </ A
6 4telephone icon ( ) <
7 Enter the phone number </ A
8 4email icon (
) <
9 Enter email address <
104picture icon ( ) <
110required picture from My Media ( ) or preinstalled pictures </ A
124group icon (
) <
134required group </ A
14 A
NOTE If a picture image for a contact is selected from My Media, the image will
appear on the screen when the contact calls you. Preinstalled pictures
are not applicable in this function.
Options in Phone Contacts
When the name and email address are being entered, the same options as SIM
53
Contacts
Call log
Contacts
Recently dialled phone numbers, answered calls and missed calls are stored in the
Call log. The numbers in the Call log list can be used to call, send messages or add
to Contacts. You can also delete the numbers from the list.
Viewing Call log
From Call log menu
Call log
1 2Dialled numbers, Answered calls or Missed calls
2 4required phone number <
Dialling from Call log
From Call log menu
1 2Dialled numbers, Answered calls or Missed calls
2 4required phone number <
3 </ Cto call
Sending messages
From Call log menu
1 2Dialled numbers, Answered calls or Missed calls
2 4required phone number <
3 A
4 4Send message </ A
5 4MMS or SMS </ A
6 Enter a message
Saving a phone number from Call log into the Contacts list
From Call log menu
1 2Dialled numbers, Answered calls or Missed calls
2 4required phone number <
3 A
4 4Add to contacts </ A
5 4Phone or SIM </ A
6 4required icon <
7 Enter as appropriate <
(If required, repeat steps 6 and 7)
8 A
54
Contacts
Options in Call log
Contacts
In each Call log list, the following options are available by pressing A.
4required option </ A
Option
Explanation
Call
Call selected number
Send message
Add to contacts
Delete
Send MMS/SMS message to selected number
Store number to Contacts
Delete selected log
Call log
Delete all logs in the list
(This option is available in the Call log list.)
Delete all
Speed dial
Phone numbers from the Speed dial of Contacts can be dialled quickly.
In Idle mode, press and hold a number key (2 - 9).
Speed
Dial list
Setting Speed dial
From Speed Dial list menu
1 4required list <
2 Enter phone number </ A
You can also select a phone number from Contacts by pressing
Ain step 1.
Viewing stored numbers
In Idle mode, press and hold a number key (2 - 9).
Making a call by using Speed dial
From Idle display
1 Press and hold a number key (2 - 9)
2 4required list A/ C
55
Contacts
Grouping Contacts entries
The ability to group Contacts entries together is an extra function of Phone Contacts.
Groups are used to collect together types of Contacts entries, e.g. business and
personal. Each group can be suitably titled for quick access to the entries contained
within.
Contacts
You can attach a particular sound to the groups to identify them. (See “Group
View
groups
Viewing groups
From View groups menu
4required group </ A
The following options are available by pressing A.
4required option </ A
Option
Explanation
Call
Call contact
Send message
Edit
Send MMS/SMS to the selected contact
Edit contact
Add contact
Copy to SIM
Speed dial
Delete
Create contact in Phone Contacts or SIM Contacts
Copy contact to SIM
Add to Speed Dial list
Delete contact
Search
Search contact by entering characters (max. 18 characters)
Send contact to another device by Infrared
Send by Infrared
56
Contacts
My Number
My Number is a contact where you can store your own numbers.
Contacts
Adding numbers
From Advanced menu
1 4My Number </ A
Advanced
2 4Mobile Profile or SIM Profile </ A
3 When My Number is empty, press </ Athen go to step 5
When My Number is already stored in SIM Profile, press A
4 4Create </ A
5 4name icon (
) <
6 Enter the name <
7 4mobile icon ( ) <
8 Enter the phone number </ A
9 A
NOTE If you select Mobile Profile, you can also select information such as
additional number, email address and picture.
Viewing stored numbers
From Advanced menu
1 4My Number </ A
2 4Mobile Profile or SIM Profile </ A
Options in My Number
When viewing My Number, the following options are available by pressing A.
4required option </ A
Mobile Profile (View Display)
Option
Explanation
Edit
Transit to Edit profile
Delete profile
Delete
Send by Infrared
Send profile by Infrared
SIM Profile (View Display and List Display)
Option
Explanation
Edit
Transit to Edit profile
Transit to Create profile
Delete profile
Create
Delete
Send by Infrared
Send profile by Infrared
57
Contacts
Group settings
You can change the group name and attach a sound to the group.
Contacts
Changing group names
From Advanced menu
1 4Group Settings </ A
2 4required group <
Advanced
3 Press and hold @to clear the current name
4 Enter new group name <
Attaching a sound to a group
From Advanced menu
1 4Group Settings </ A
2 4required group A
3 Sound Type </ A
4 4Preinstalled, My Media or Download </ A
5 4required sound type </ A
Selecting <Default> in step 4, you can also select a default sound.
Memory status
Memory status shows how many locations are available in the Contacts.
From Advanced menu
4Memory status </ A
Copy from SIM
You can copy SIM Contacts to Phone Contacts.
From Advanced menu
4Copy from SIM <x 2 / Ax 2
Service numbers
When SIM containing SDN (Service Dialling Number) is inserted in your phone, you
can call a service number by selecting from the list.
SDN enables you to access special services provided by your network operator, such
as customer support, emergency services, etc.
Service
numbers
58
Browser
Server setting
Before Internet services can be accessed, you need to subscribe to your network
operator or Internet Service Provider (ISP) to enable the relevant configuration
information. Please contact your network service provider to ensure that your
network settings are correct.
Browser
Modifying previously entered settings may cause failure of the browser.
The phone’s
WAP (Wireless
Application
Protocol)Browser
enables you to
access Internet
services
From Browser menu
1 A(Options)
2 4Settings </ A
3 4WAP profiles </ A
supported by the
network, such as
news, weather
reports, sport etc.
Ten server settings can be set up in the phone. If you find your server’s name under
WAP profiles, select the server and press A(Options) then select Edit and press
<. If no settings are present contact your network service provider for these
settings. [Profile name, Home page, Gateway, Port, Data connections (GPRS and
CSD setting)]
You need to set GPRS and CSD setting in Settings > Data connections menu
before setting the server information.
Those configuration Options will be given by network service provider.
Once completing the entry, press A(Save) then press <or select Activate after
A(Options) is pressed.
The first time that the browser is activated there will be no content stored so the
Home URL content will be displayed (as defined by the network operator). The Home
URL will be recalled from the cache, each time the browser is activated. (Cache is
the phone’s memory that stores content downloaded in the past.)
Viewing the contents
From Browser menu
Select menu <
60
Browser
Browser options
From Browser menu
Browser
1 A(Options)
2 4select from below options </ A
Option
Explanation
Go to page
Select
Select item
Add bookmark
Edit
Delete
Bookmarks
Go to bookmark list
Enter
address
Go to URL entry
The image in contents is saved in “My
Media”
Save image
Set as
bookmark
The displayed URL will be saved in
Bookmarks
Home
Service
Inbox
Open Service Inbox
Clear cache
View address
WAP information
Reload page Reload this page
Go to homepage, clear the cache,
view URL or view WAP information
Advanced
Settings
Edit profiles/Push access or view
security information
WAP profiles
Push access
Security
Exit browser Terminate the browser
Browser options (Bookmarks)
From Browser menu or contents
From Browser menu From contents
1 A(Options)
2 4Bookmarks </ A
3 4required bookmarks
4 <to load the URL
or
A
A
Ato select options
Options:
Go to page.................. Jump to the URL page
Add bookmark ................... Add to bookmarks
Edit .......................................... Edit bookmark
Delete.................................. Delete bookmark
61
Browser
Browser options (Enter address)
You can jump to the required content by entering the URL.
From Browser menu or contents
1 A(Options)
Browser
2 4Enter address </ A
3 Enter URL <
Browser options (Save image)
Displayed images can be saved in “My Media”.
From contents
1 A(Options)
2 4Save image </ A
3 4to see whole image
4 </ Ato save
Browser options (Set as bookmark)
Favourite URLs can be saved in bookmarks.
From contents
1 A(Options)
2 4Set as bookmark </ A
3 Enter title <to save
Browser options (Service Inbox)
View WAP push message and go to URL.
From contents
1 A(Options)
2 4Service Inbox </ A
3 <to load the URL
or
Ato select options
Options:
When text and URL are delivered from your service provider,
the following options are available.
Go to page......................................... Jump to the URL page
View message ................................................ View message
Delete .......................................................... Delete message
When only URL is delivered from your service provider, the
following options are available.
Go to page......................................... Jump to the URL page
Delete .......................................................... Delete message
62
Browser
Browser options (Reload page)
Current page can be reloaded.
Browser
From contents
1 A(Options)
2 4Reload page </ Ato reload this page
Browser options (Advanced)
From Browser menu or contents
1 A(Options)
2 4Advanced </ A
Browser options (Advanced - Home)
Phone jumps to the set-up homepage.
From Advanced menu
1 4Home
2 </ Ato jump to homepage
Browser options (Advanced - Clear cache)
Cache is cleared.
From Advanced menu
1 4Clear cache </ A
2 </ Ato clear the cache
Browser options (Advanced - View address)
View URL of the contents.
From Advanced menu
4View address </ A
Browser options (Advanced - WAP information)
View WAP information.
From Advanced menu
4WAP information </ A
NOTE View address is available only from contents.
63
Browser
Browser options (Settings)
From Browser menu or contents
Browser
1 A(Options)
2 4Settings </ A
Browser options (Settings - WAP profiles)
Set up WAP browser.
From Settings menu
1 4WAP profiles </ A
2 4required profile
3 <to activate
or
Ato select options
Browser options (Settings - Push access)
Set up Push access to receive WAP messages.
From Settings menu
1 4Push access </ A
2 4Service Indication, Service Loading or Other messages
</ A
3 4On or Off </ A
Browser options (Settings - Security)
View security information.
From Settings menu
1 4Security </ A
2 4Certificates, Current certificate or Session info </ A
64
Games
Selecting games
You have one pre-installed Java™ application – MobileGolf.
The downloaded Java™ applications may also be listed.
Games
From Games menu
4Java™ application you want to play <
The following options are available by pressing A.
4required option </ A
Option
Explanation
Games
Indicate application name, version, vendor, description and
store size
Properties
Update
Delete
Update Java™ application
Delete Java™ application
Your phone supports J2ME™ Java™ applications. Other types of Java™
applications cannot be installed.
MobileGolf
This game is a golf game. Compete against your score on all 18 holes.
Key operation:
2to determine the direction, then <to go to the shot screen.
On the shot screen,
2to select the club to be used, <once to start the shot and <again to
determine the strength of the shot. Finally, <while matching the timing to execute
the shot.
Downloading games
The downloaded Java™ applications will be stored in Games menu.
Download
From Download menu
Select required Java™ application <
66
Games
Settings
Games
Java™ applications settings, such as volume and backlight etc, can be changed.
Settings
Explanation
Sound volume
Backlight
Volume setting for Java™ applications
ON/OFF setting of Backlight in Java™ applications
ON/OFF setting of Vibration in Java™ applications
Settings for online Java™ application connections
Display of Memory status
Settings
Vibration
Online service
Memory status
Deletion of downloaded Java™ file and reset records of
preinstalled Java™ application
Reset
Information
Display of copyright information
If “Online service” is selected more options are displayed as follows.
Ask ........... When a Java™ application with HTTP access is activated the
phone must ask user’s permission to access network.
Yes........... Always allow online connections.
No............. Never allow online connections.
67
Applications
STK (SIM Tool Kit)
This function is SIM dependent (E). This menu name will be changed.
Appli-
cations
Alarm
Setting the alarm
From Alarm menu
SIM
Tool Kit
1 4alarm icon (
2 4clock icon (
clock) </ A
) <, 4On </ A
) <, enter the required time (24 hour
3 4alarm repetition icon (
) <, 4Once, Everyday,
Weekdays or Weekend </ A
4 4sound set-up icon ( 4Preinstalled, My Media or Download </
)
<
,
A
,
4
required ring type </ A(When you select My Media ) to select
,
A
(
required ring type.)
Alarm
5 4volume icon ( ) <, 0adjust the volume </ A
6 Ato save the settings
When the alarm has been set, an alarm icon (
is in Idle mode.
) will be displayed when the phone
The alarm is activated based on the current clock.
When the set time is
reached, the alarm
will sound and the
display will light with
an alarm message.
Muting the alarm
To stop the alarm:
1 Press any key or @
2 </ A
To disable the alarm:
From Alarm menu
1 4alarm icon (
) <
2 4Off </ A
3 Ato save the setting
Adjusting the alarm time
From Alarm menu
1 4clock icon (
) <
2 Enter the required time </ A
3 Ato save the setting
If you want to change other settings, see “Setting the alarm”.
69
Applications
Snooze Function
Applications
Snooze Function lets the alarm repeat 5 times if you do not press </ Aafter
stopping the alarm or press Dto stop the alarm.
To stop Snooze Function:
Press </ Awhen “Stop snooze?” appears in the display.
If you press @/ D, the alarm will repeat 5 more times at 5 minutes intervals until
“End of alarm” is displayed.
Alarm
NOTE The alarm goes off at the time you set even if the phone is off.
Sound recorder
You can record sounds or your voice in My Media. The recorded sound files you
record can be attached to MMS messages.
Sound
recorder
Recording new sound
From Sound recorder menu
1 </ Ato start recording
2 </ Ato stop recording (The max. recording time is 15
seconds)
3 A
4 4Save </ A
If you select Send MMS, you can access the MMS menu.
To play a sound:
<after step 2
To adjust the volume, 2
To stop playback, </ A/ @
NOTE When you finish recording and finding that My Media is full, the recorded
sound can be saved if you make space by deleting files (pictures, sounds
and text templates). Press Ato delete unwanted files.
Calculator
Calculator
You can use the 4-function calculator (addition, subtraction, multiplication and
division) to make simple arithmetic operations.
From Calculator menu
1 Enter a number (max. 10 digits) and it will be displayed
If a decimal point is required, press A
2 To select arithmetic operation
(1to multiply, 3to add, 5to divide, 7to subtract)
3 Enter a number (max. 10 digits) and it will be displayed
4 <to calculate
70
Applications
Applications Infrared
By using the Infrared connection with another X400 or with other devices with an
infrared port, you can transfer data between the devices.
Preparing for Infrared connection
Place the X400 and another device with an Infrared port within the effective
Infrared connection range of each other.
Infrared
There must be no obstruction between the two communicating devices.
The Infrared ports of both devices must point at each other.
If you use a PC, you need to set up an Infrared connection on the PC.
(Example: Start > Settings > Control Panel > Infrared > Options tab > Enable
Infrared Communication)
If you try to send
data that cannot
be forwarded or
saved, an error
message will be
displayed.
Sending data
The types of data you can send are: Contacts, Pictures and Sounds in My Media.
Ensure that the Infrared ports of your X400 and the second phone or device are
pointing at each other with no obstructions in between.
Some downloaded files may be protected under copyright laws. These files
should not be sent.
Setting Infrared
You need to activate Infrared before receiving data.
From Infrared menu
4On or Off </ A
NOTE When Infrared is set to on, “
” appears on the display. If Infrared is
unused for 10 minutes or the phone is once switched off, it is
automatically set to off and “
” disappears.
Sending pictures and sounds
From Idle display
1 <
2 0My Media </ A
3 4Pictures or Sounds </ A
4 4required item </ A
5 4select data to send A
6 4Send by Infrared </ A
71
Applications
Sending Contacts
From Idle display
Applications
1 <
2 0Contacts </ A
3 4Contacts list </ A
4 4select contact to send A
5 4Send by Infrared </ A
Infrared
Receiving data via Infrared port
You need to activate Infrared before receiving data.
Data received message is displayed then sent data is displayed.
</ Ato save the data
or
@to cancel
72
My Media
Pictures (My Media > Pictures)
Pictures taken by the camera or images downloaded from the Internet can be
managed.
My Media
Viewing picture / image
From Pictures menu
The data saved in
the X400 is
1 4Stored pictures </ A
2 4required picture / image <
located in My
Media. There are
four pre-defined
folders (Pictures,
Sounds,
Shortcuts, Text
templates). The
maximum
Downloading picture / image file
From Pictures menu
1 4Download </ A
capacity of the
Data Folders is
approx. 1 MB.
2 The picture / image file download site will be displayed
Taking a picture
From Pictures menu
1 4Take new picture </ A
Pictures
Picture options
When the picture is selected, the following options are available by pressing A.
4required option </ A
Option
Explanation
Send MMS
Send by Infrared
As wallpaper
Add to contacts
Rename
Attach pictures to MMS messages (see “MMS”)
Send pictures to another device by Infrared
Use pictures as Wallpaper
Add pictures to contact
Rename picture files
Delete
Delete picture files
Properties
Show file name, size, date and forward lock status
75
My Media
Sounds (My Media > Sounds)
Downloaded sounds and Recorded sounds are stored in Stored sounds.
My Media
Checking sounds
From Sounds menu
1 4Stored sounds </ A
2 4required sound <
Sounds
Downloading sounds
From Sounds menu
1 4Download </ A
2 The sound file download site is displayed
Recording new sound
From Sounds menu
1 4Record new sound </ A
Options in sound file (Stored sounds)
When a sound is selected, the following options are available by
pressing A.
4required option </ A
Option
Explanation
Send MMS
Attach sound files to MMS messages (see “MMS”)
Send by Infrared Send sound files to another device by Infrared
Set sound files to Incoming tone, Message tone and Group
Set alert tone
tone (AMR files cannot be set to alert tones.)
Rename
Delete
Rename sound files
Delete sound files
Properties
Show file name, size, date and forward lock status
76
My Media
Shortcuts
You can create shortcuts you want to use in My Media.
My Media
Viewing shortcuts
From Shortcuts menu
4required content <
Shortcuts
The following options are available by pressing A.
4required option </ A
Option
Edit
Explanation
Overwrite the present shortcut with a new one
Move shortcut to another place in the list
Store new shortcut
Move
Add
Delete
Delete shortcut
Access to shortcuts:
From Idle display
1 1
2 4required shortcut <
Text templates
You can use templates stored in the phone when creating a text message.
You can also save frequently used text as templates.
Text
templates
Editing the Text templates
From Text templates menu
4required template <
(The display will turn to editing display)
The following options are available by pressing A.
4required option </ A
Option
New
Explanation
Add words to new template
Send template to MMS or SMS
Edit template
Send message
Edit
Delete
Delete template
Properties
Show size and date
77
Personal WAP/MMS Settings
Use the table below to record your GSM/GPRS WAP/MMS settings.
Provisioning information setting
No.2 No.3 No.4
Item
No.1
No.5
Profile name
Homepage
Gateway
Port
(Non secure / Secure)
Data connections
CSD
Profile name
Account
Password
Call type
Phone number
Idle timer
GPRS
Profile name
Account
Password
APN name
Auth type
Normal / Secured / None
(PAP) (CHAP)
Message server
79
Personal WAP/MMS Settings
Provisioning information setting
No.7 No.8 No.9
Item
No.6
No.10
Profile name
Homepage
Gateway
Port
(Non secure / Secure)
Data connections
CSD
Profile name
Account
Password
Call type
Phone number
Idle timer
GPRS
Profile name
Account
Password
APN name
Auth type
Normal / Secured / None
(PAP) (CHAP)
Message server
80
Troubleshooting
Should any problem persist, contact your dealer.
Problem
Cause
Remedy
Phone will not switch on.
Check that the battery is fully charged and
correctly connected to the phone.
Extremely short battery life
for a new battery.
The network you are using
and the condition of the
battery can affect battery life.
Short battery life for an old
battery.
The battery has worn out.
Replace with a new fully charged battery.
The charging indicator does
not light, the battery level
indicator does not appear
and the phone cannot be
switched on when charging.
The battery is not attached to Leave the phone charging the battery for a
the phone or, when the
battery has been deeply
discharged, the phone will
take a short time until the
indicator lights.
few minutes before the indicator lights and
you attempt to switch the phone on.
Battery fails to charge.
The battery is not attached to Ensure the battery is fitted to the phone prior
the phone.
to commencing charging.
Battery was attached to the
phone after the Fast Travel
Charger was connected.
Calls cannot be made.
Keyguard is on.
Disable Keyguard.
Outgoing calls are barred.
Disable outgoing Call Barring or barred
dialling.
The phone is not registered
on a network.
Move to a coverage area and operate your
phone after it has registered with a network.
Calls cannot be made from
Fixed Dial store.
Check whether your SIM supports Fixed
Dial. Check if Fixed Dial is switched on.
Check whether the phone number is stored
in Fixed Dial.
Calls cannot be received.
The phone is not switched
on.
Switch the phone on.
Incoming calls are barred.
Disable incoming Call Barring.
The phone is not registered
on a network.
Move to a coverage area and operate your
phone after it has registered with a network.
Emergency calls cannot be
made.
You are not in a GSM
coverage area.
Check that the antenna symbol ( ) is
displayed – move to a coverage area and
operate your phone when the antenna
symbol is displayed.
81
Troubleshooting
Important error messages
These are some of the most important error messages which may be displayed:
Failed
Roaming in the selected area is not allowed.
Roaming with the selected network is not allowed.
The network has detected an authentication failure because your SIM is not
registered with that network – contact your service provider.
SIM blocked
The SIM is blocked because the PIN unblocking key (PUK) has been entered
incorrectly ten times – contact your service provider.
Insert SIM
The phone has detected a problem with the SIM – switch the phone off and then
back on; if the message is still displayed contact your service provider.
Invalid SIM
The SIM has failed one or more of the SIM personalisation checks – contact
your service provider.
Function unavailable
PIN2 invalidated
The selected feature is either not supported by the SIM or is not available with
the current subscription – contact your service provider.
The PIN2 is blocked permanently because the wrong PUK2 has been entered
ten times, services controlled by PIN2 cannot be used – contact your service
provider.
Message rejected.
Storage full
or
A message has been received but the message store is full – to receive
messages, delete some of the currently stored messages.
Message rejected.
SIM full
Too many characters.
The edited or newly created contact number is too long for the SIM.
This message may not be The message area is full. Your messages cannot be stored until some of the
stored
currently stored messages are deleted.
Verification failure
On changing the PIN/PIN2, verification of the new code is incorrect – retry
changing the PIN/PIN2 with correct verification.
Auto redial list full
Redial list of unsuccessfully dialled numbers is full – switch the phone off and
then on again.
82
Glossary of Terms
APN
Access Point Name. Directs the user to the gateway or the required service.
CHAP
Copy
CSD
Challenge Handshake Authentication Protocol. A security feature in the GPRS network.
Copies selected text from a short text message without removing it from the original message.
Circuit Switched Data. A communication method used to transmit data over telephone
connections.
Cut
Permanently removes selected text from a short text message.
DTMF Tones Dual Tone Multi-Frequency tones allow you to communicate with computerised phone
systems, voice mailboxes, etc.
GPRS
General Packet Radio Service. A GSM transmission technique that transmits and receives
data in packets rather than setting up a continuous channel. It makes very efficient use of
available radio spectrum and users pay only for volume of data sent and received.
GSM
MMS
Global System for Mobile communications. The name given to the advanced digital technology
that your phone uses.
Multimedia Messaging Service. An advanced mail system used for cellular phones. This
service allows sending/receiving text messages and attaching pictures, animation and sound
to the same.
Network
Operator
The organisation responsible for operating a GSM network.
PAP
Password Authentication Protocol. A security feature in the GPRS network.
Password
Used for the control of GPRS/CSD settings in Data connections and the control of Call Barring.
Supplied by your service provider.
PIN
Personal Identification Number used for SIM security. Supplied by your service provider. If the
PIN is entered incorrectly 3 times, the PIN will be blocked.
PIN2
Personal Identification Number used for the control of Fixed Dial store and Call Charge
metering. Supplied by your service provider. If the PIN2 is entered incorrectly 3 times, the PIN2
will be blocked.
PUK/PUK2
PIN/PIN2 Unblocking Key. Used to unblock the PIN/PIN2 code. Supplied by your service
provider. If the PUK/PUK2 is entered incorrectly 10 times, the PUK/PUK2 will be blocked.
Registration
Roaming
The act of logging on to a GSM network. This is usually performed automatically by your phone.
The ability to use your phone on networks other than your home network.
The organisation responsible for providing access to the GSM network.
Service
Provider
SIM
Subscriber Identity Module. A small smart-card which stores unique subscriber and user-entered
information such as Contacts entries and short messages. Supplied by your service provider.
SMS
URL
WAP
Short Message Service. A basic mail system used for cellular phones. This service allows
sending/receiving of short text messages.
Uniform Resource Locator. The URL is an alphanumeric address that points to homepages
and other Internet locations.
Wireless Application Protocol. The communication standard which enables you to download
resources from the Internet to your phone.
83
Index
T
®
V
N
P
W
Q
R
S
Settings (Messages)
Shortcuts
SIM
85
|
