Panasonic A101 User Manual

ii  
Contents  
Getting Started  
Fitting and removing the battery  
Before removing the battery, ensure that the phone is switched off and the charger  
is disconnected from the phone.  
Fitting the battery — A100  
1
2
1
2
Remove the battery compartment cover. Insert the battery ensuring the  
3 gold contacts align with the 3 gold pins in the phone. When replacing  
the cover, ensure to slide upward to the top of the phone.  
Removing the battery — A100  
1
2
Push and hold the release latch towards the top of the phone using  
the cover clip, then lift the battery out .  
Getting Started  
1
     
Fitting the battery — A101  
Remove the battery compartment cover. Insert the battery ensuring the  
3 gold contacts align with the 3 gold pins in the phone. When replacing  
the cover, ensure to slide upward to the top of the phone.  
Removing the battery — A101  
1
Push and hold the release latch towards the top of the phone using  
the cover clip, then lift the battery out .  
2
Getting Started  
Fitting and removing the SIM  
The SIM is located under the battery.  
Fitting the SIM — A100  
Removing the SIM — A100  
Ensure the gold contacts are facing  
downwards before sliding the SIM  
into the SIM holder.  
While holding the tab down, slide  
the SIM out.  
Fitting the SIM — A101  
Removing the SIM — A101  
Ensure the gold contacts are facing  
downwards before sliding the SIM  
into the SIM holder.  
While holding the tab down, slide  
the SIM out.  
Charging the battery  
Connecting and disconnecting the Travel Charger  
The battery must be fitted in the phone before the charger is connected. Insert the  
Charging Connector into the socket at the base of the phone before connecting the  
Getting Started  
3
       
charger to the mains outlet. Once connected, the Battery level indicator will start  
scrolling (see “Battery level indicator” on page 4). It is recommended to charge the  
battery for a minimum of 4 hours before first use.  
NOTE: DO NOT force the connector as this may damage the phone and/or the charger.  
If the battery has been deeply discharged, it may take several minutes before the Battery  
level indicator is displayed.  
When charging is complete,  
disconnect the charger from  
the outlet before removing the  
plug from the phone.  
Battery level indicator  
While charging  
Charging  
complete  
Phone on  
Phone off  
>J  
Low battery power warning  
When the battery power is low, a “Battery is Low” message will be displayed. If this  
occurs during conversation, finish your call immediately. The power will  
automatically switch off after the warning tone. Fully recharge the battery. See  
“Charging the battery” on page 3. (Calls can be made and received while the phone  
is charging.)  
4
Getting Started  
   
Your phone — A100  
Earpiece  
Personal  
Hands Free Connector  
Display  
Navigation Key  
Scroll/move through  
menus  
Right Soft Key  
Cancel/exit  
Perform functions  
indicated in the right  
display corner  
Left Soft Key  
Perform functions  
indicated in the left  
display corner  
Send Key  
Power/End Key  
Press and hold to switch  
your phone on/off  
Answer/make a call  
Silent Mode Key  
Press and hold to switch  
Silent Mode on/off  
Charging Connector  
Getting Started  
5
 
Your phone — A101  
Earpiece  
Personal  
Hands Free Connector  
Display  
Navigation Key  
Scroll/move through  
menus  
Right Soft Key  
Cancel/exit  
Perform functions  
indicated in the right  
display corner  
Left Soft Key  
Perform functions  
indicated in the left  
display corner  
Send Key  
Answer/make a call  
Power/End Key  
Press and hold to switch  
your phone on/off  
Silent Mode Key  
Press and hold to switch  
Silent Mode on/off  
Charging Connector  
6
Getting Started  
 
Key functions  
A100 Key  
A101 Key  
Function  
Navigation Key: Scroll or move through menus, text and  
phone numbers.  
In idle mode, press to display the “Contacts” menu.  
4
4
Left Soft Key: Perform the functions displayed in the  
lower left corner.  
In idle mode, press to activate the “Menu” display, or press  
and hold to activate the “Profiles” menu.  
A
@
A
Right Soft Key/Cancel or Exit Key: Perform the  
functions displayed in the lower right corner. Mainly used  
to cancel and return to the previous menu level.  
In text entry mode, press to delete text.  
In idle mode, press and hold to activate the “Messages”  
menu.  
@
When receiving a call, press to mute the ringtone.  
Numeric Keys: Enter numbers. Press and hold one of the  
keys from $ to , for Hotkey dialling.  
Press and hold # to enter a “+” (international access  
code) or “P” (extension number code).  
#~, #~,  
To dial an extension number, dial the phone number first,  
press and hold # to add a “P”, then enter the extension  
number.  
"
"
In text entry mode, enter text, numbers and characters.  
Send Key: Make a call or answer a call.  
In idle mode, press to check the last dialled list.  
In text entry mode, press to switch between input  
methods.  
C
D
!
C
D
!
Power/End Key: End/reject a call.  
During key operation, press to return to the previous display.  
Press and hold to return to idle mode.  
In idle mode, press and hold to switch phone on/off.  
Silent Mode Key: In idle mode, press and hold to switch  
the Silent Mode (Vibrator on/Ring off) on and off.  
In text entry mode, press to switch T9 smart English input  
mode on/off, or press and hold to enter symbols.  
Getting Started  
7
   
During a call  
Minimal menu options are available during a call by pressing the following key  
options.  
A100 Key  
A101 Key  
Function  
Activate Hands free, Conference call, Call transfer,  
Contacts list, Messages menu, Call status.  
A
A
Swap between two calls. Put the call on hold.  
Increase the volume while on a call.  
Decrease the volume while on a call.  
@
1
@
1
5
5
Display the last dialled records list. Answer another call. If  
a phone number is entered, hold the active call and call the  
number.  
C
C
Send DTMF.  
#~,  
#~,  
Press and hold ! to switch the Hands free speaker  
on/off  
!"  
!"  
8
Getting Started  
 
Displays  
Idle display  
The clock appears on the display one minute after you press  
the last key.  
The clock position changes every minute.  
NOTE: All screen images in this manual are simulated.  
NOTE: Some services described in this manual are network  
dependent or may only be available on a subscription basis. Some  
functions are SIM dependent.  
For more information, contact your service provider.  
Getting Started  
9
     
Status icons  
The status icons are displayed or animated according to the currently activated  
functions. The Antenna, Signal and Battery icons are displayed when the handset  
is switched on and connected to a network. If there is no connection with the  
network, the Signal icon will not be displayed.  
Icon  
Meaning  
Antenna and signal strength  
OP  
Registered to a non-home network – roaming  
Call Diverts is on  
G
Key Guard is enabled  
Message area is full  
Unread message is stored  
L
(Flashing)  
Voice mail indicator (voice mail has been received)  
N
Alarm is set  
All tones or ring volume is off  
Vibrator is on  
Battery charge level  
Low battery  
J
10  
Getting Started  
 
Symbols in the Manual  
A100  
A101  
Meaning  
Symbols  
Symbols  
154  
Press the Navigation Key in the direction indicated by  
the arrow  
154  
A
@
Press Left Soft Key  
Press Right Soft Key  
A
@
#~,  
#~,  
C
Press numeric Keys  
Press Send Key  
C
D
"
D
Press Power/End Key  
Press Asterisk Key  
"
!
Press Silent Mode Key  
!
Symbols used throughout the manual are based on the A100.  
Getting Started  
11  
 
Basic Operations  
Switching the phone on/off  
1. Press and hold D for 2 to 3 seconds  
2. The phone starts in idle mode  
3. Press and hold D again to switch the power off  
Making a call  
Ensure that the signal strength meter shows network  
coverage is available in the current area.  
To make a call, start in idle mode.  
Standard dialling  
1. Enter the area code and phone number C  
The dialled number is displayed  
2. When the other party answers, talk into the Microphone  
Earpiece Volume:  
During a call, 4 to adjust the earpiece volume  
Using the contacts list  
1. 4 to enter Contacts  
2. 4 required name or phone number C  
Last number dialling  
1. C  
2. 4 required name or phone number C  
12  
Basic Operations  
             
International dialling  
The international access code (+) and the destination  
country/region code should be entered, followed by the area  
code and phone number.  
1. Press and hold # until “+” is displayed, then enter the  
country / region code  
2. Enter the area code and phone number C  
NOTE: Many countries/regions include an initial “0” in the area  
code. This should, in most cases, be omitted when dialling  
international numbers. If you have difficulties making international  
calls, contact your service provider.  
Emergency call  
To make an emergency call, the antenna (  
) must be present  
When SIM is inserted:  
Enter the emergency number 112 C  
When SIM is not inserted:  
Enter the emergency number 112 C  
OR  
@ (SOS) > “Emergency callA (Yes)  
NOTE: Most countries support the international emergency  
number 112. If you find the number does not work on your phone,  
please call your service provider. Emergency calls without a SIM is  
country or network operator dependent.  
Ending a call  
To hang up, D  
The duration of the call will be displayed.  
When the “Max cost” is on, the remaining units will be  
displayed.  
For setting the “Max cost”, see “Maximum cost:” on page  
58.  
Basic Operations  
13  
       
Answering a call  
C
OR  
If “Any key answer” is on,  
From idle mode  
press any key except D.  
Volume:  
From My Phone  
1. 4 Sounds >Volume A(Select)  
2. 4 Adjust the volume level A(OK)  
Quick touch silent mode:  
To quickly set the ringtone off (  
on ( ), press and hold !.  
) and the vibrator  
To resume, press and hold ! again.  
One click mute on incoming call:  
To set the ring tone off,  
@(Mute)  
•If you want to reply to the call, A(Reply)  
•If you want to reject the call, @(Reject).  
Reject incoming call:  
D
14  
Basic Operations  
       
In-call operations  
During a call, the following options are available by pressing  
A(Menu) or @(Hold)  
Hands free/Hand held  
You can switch the phone between hands free and hand  
held.  
During a call:  
1. A(Menu)  
2. 4 Hands free / Hand held A(Select)  
Contacts  
You can access your Contacts list that is stored in SIM in  
your phone.  
During a call:  
1. A(Menu)  
2. 4 Contacts A(Select)  
Messages  
You can create, check, or send a message while on a call.  
During a call:  
1. A(Menu)  
2. 4 Messages A(Select)  
Basic Operations  
15  
       
Hold  
You can put a call on hold.  
During a call:  
@(Hold)  
To resume:  
A(Back)  
NOTE: This function is network dependent.  
Making a second call  
During a call:  
1. Enter the second phone number or select a phone  
number from the Contacts list (see “Contacts” on page  
15).  
2. C The first call is put on hold  
NOTE: This function is network dependent.  
16  
Basic Operations  
 
Incoming call while on a call  
This function is network dependent.  
During a call, you may receive another call.  
1. To answer another call, C (First call is placed on  
hold.)  
To disconnect another call, A(Reject)  
2. During a conversation with a second caller, @(Swap)  
or A(Menu) and select one of the following options:  
Conference  
You can make a conference call with up to 5 parties  
During a call:  
1. A(Menu)  
2. 4 Conference A(Select)  
NOTE: This function is network dependent.  
Call transfer  
Call transfer connects the active calling party to the other  
party on hold, then disconnects your line, leaving the two  
callers in the conversation.  
During a call:  
1. A(Menu)  
2. 4 Call transfer A(Select)  
NOTE: This function is network dependent.  
Call status  
Call status allows you to disconnect the line or put a call on  
hold with the active party.  
During a call:  
1. A(Menu)  
2. 4 Call status A(Select)  
Basic Operations  
17  
         
Swap  
When you are connected to two calls, you can switch to the  
other calls.  
During a call:  
@(Swap) to change to the other call.  
DTMF  
DTMF can be sent during a conversation. These are often  
used to access voice mail, paging and computerised home  
banking. For example, you may need to enter a number to  
remotely access voice mail messages. A phone number may  
be stored in the Contacts together with a DTMF sequence,  
allowing the number to be dialled upon recall and the DTMF  
number to be sent automatically.  
Send DTMF during a call:  
Enter digits (#~,, ! or ").  
Pause dial  
Using pauses allows you to send DTMF automatically.  
1. Enter the phone number  
2. Press and hold # until a “P” is displayed at the end of  
the phone number entered  
3. Enter DTMF digits after the pause, e.g. enter the number  
to access voice mail messages  
4. C  
When the call is connected the DTMF sequence will be  
sent after 3 seconds.  
18  
Basic Operations  
   
Text entry  
You can use alphanumeric characters to enter details into the Contacts list, to  
create text, etc.  
Text mode  
Numeric  
Multi tap  
(Input mode indicator:  
Abc, abc or ABC)  
®
Key  
T9 (T9Abc, T9abc, T9ABC)  
(Input language: English)  
(0 ~ 9)  
Space 0. , ? ! + - = : ¿ ¡ ” ’ ; _  
0
1
2
3
4
5
6
7
8
9
#
$
%
&
'
(
)
*
+
,
C
"
!
@
1 / ( ) < > [ ] { } % ~ _ & (1 / ( ) < > [ ] { } % ~ _ &)  
A B C 2 –  
D E F 3 –  
G H I 4 –  
(a b c 2 )  
(d e f 3 )  
(g h i 4 )  
(j k l 5 )  
A B C 2 Ä  
D E F 3 É  
G H I 4  
(a b c 2 ä à ç)  
(d e f 3 é è)  
(g h i 4 ì)  
J K L 5 –  
J K L 5  
(j k l 5)  
M N O 6 –  
P Q R S 7 –  
T U V 8 –  
W X Y Z 9 –  
(m n o 6 )  
(p q r s 7 )  
(t u v 8 )  
(w x y z 9 )  
M N O 6 Ö Ñ  
P Q R S 7  
T U V 8 Ü  
(m n o 6 ö ñ ò)  
(p q r s 7 ß)  
(t u v 8 ü ù)  
W X Y Z 9 Æ Ø Å (w x y z 9 æ ø å)  
Shift mode  
* Γ ∆ Θ Λ Ξ Π Σ Φ Ψ Ω  
*
(Hold) Space # £ $ ¥ ¤ @ \ § ^ | ↵  
Delete text / (Hold) Delete all characters  
#
NOTE: Displayed characters in the T9® mode vary depending on the selected input  
language. Use ! to toggle T9® On/Off. If the combination of letters typed has  
produced a word which is not the one you require, press A repeatedly until the  
correct word is displayed. Then continue to the next word. When “–” is reached,  
press @ to spell the word you require.  
Basic Operations  
19  
   
Shift mode change  
In text entry mode, you can change mode by pressing and  
holding C.  
Multi tap  
Tegic  
Abc -> abc -> ABC -> 123  
T9Abc -> T9abc -> T9ABC ->  
123  
Text Input mode change  
In text entry mode, to switch T9® mode On/Off, press!.  
Auto capital change  
Auto capital affects Abc and T9Abc.  
When Input mode is changed to Abc or T9Abc, the first  
character is input as upper case and subsequent letters as  
lower case.  
When one of the following characters [. (Period) or ! or ? ] is  
input before a space, the next character is input as upper  
case.  
T9® Text Input  
Using this mode of text input dramatically reduces the  
required number of key presses.  
Press a key once for any letter you require on that key. The  
desired letter may not be displayed. Continue pressing other  
keys until the end of a word is reached, then check that the  
word has been typed correctly before continuing on to the  
next word. If the combination of letters typed has produced a  
word which is not the one you require, press A repeatedly  
until the correct word is displayed. Then continue to the next  
word.  
20  
Basic Operations  
       
Example of Text Input in T9® Mode  
To type a new message, follow these steps:  
1. At the beginning of a new message press and hold  
@(Clear) to delete previous text, if necessary  
2. Press C to change letter case, if necessary  
3. Press % % ( ( “Call” is displayed  
Note that the displayed words change as you type. Always  
type to the end of the word before editing.  
T9® Languages can be selected from T9 Input – see “T9  
If the word you require is not in the internal dictionary, then it  
should be entered using the Multi tap (ABC) mode.  
Other text modes  
Multi tap mode (Abc, abc or ABC):  
Each time a key is pressed in quick succession, the next  
character available on that key is displayed. Releasing the  
key or pressing another key enters the character displayed.  
The cursor moves to the next position.  
In T9 (Abc) or Multi tap (Abc) mode, the first entered letter in  
a sentence is in upper case.  
Basic Operations  
21  
 
Menu Display  
NOTE: Menu display contents are dependent on your SIM.  
The menu system provides the means for accessing the functions which do not  
have their own dedicated buttons on the keypad.  
From idle mode  
1. A(Menu)  
The main menu display has 9 menu options  
2. 4 required menu A(Select)  
OR  
press a number next to a menu icon to access a menu option directly.  
To go back to the Menu display,  
D or @ repeatedly until to the Menu display returns.  
22  
Basic Operations  
   
Menu Structure  
The 9 main menus are as follows:  
My Phone  
Sounds  
Display  
Games  
Hit Mouse  
Memory  
Contacts  
Browse  
Create  
Language  
Alerts  
Profiles  
Auto answer  
Any key answer  
Defaults  
Groups  
Memory status  
My Numbers  
Hotkey dial  
My Contacts  
Messages  
Create  
Calendar  
Key Guard  
Inbox  
Outbox  
Archive  
User Messages  
Memory status  
Settings  
Cell Broadcast  
Application  
Clock  
Calculator  
Currency  
Melody composer  
(Phone Menu)*  
Phone Menu  
(or STK) *  
Call Service  
Call Diverts  
Security  
Records  
Last dialled  
Answered  
Unanswered  
Delete all  
Network  
*STK(SIM Tool Kit) is SIM dependent.  
Menu Structure  
23  
   
My Phone Menu  
My Phone  
Sounds  
Display  
Ringtones ........................25  
Volume.............................25  
Key tone...........................25  
Warning tone...................25  
Wallpaper......................... 26  
Greeting........................... 26  
Animation ........................26  
Contrast...........................27  
Backlight..........................27  
T9 Input............................27  
Display Languages.........27  
Language  
Alerts  
Ring only ........................ 28  
None................................ 28  
Ring & Vibrate................ 28  
Vibrate only .................... 28  
Ring once ....................... 28  
Profiles  
Normal .............................28  
Quiet.................................28  
Outdoor............................28  
Headset............................28  
.............................................................................................30  
Auto answer  
Any key answer  
Defaults  
.............................................................................................30  
.............................................................................................30  
24  
My Phone Menu  
   
Sounds  
Ringtones  
You can change the ringtones for specific events such as  
incoming calls, messages, or alarms. To customise the  
ringtone, select the event first, then modify the ringtone.  
From My Phone  
1. 4 Sounds A(Select)  
2. 4 Ringtones A(Select)  
3. 4 Any call, Group calls, Alarm or Messages  
A(Select)  
4. 4 required ringtone A(OK)  
Volume  
From My Phone  
1. 4 Sounds A(Select)  
2. 4 Volume A(Select)  
3. 4 Adjust the volume level A(OK)  
Key tone  
From My Phone  
1. 4 Sounds A(Select)  
2. 4 Key tone A(On/Off)  
Warning tone  
The warning tone informs you of low battery.  
From My Phone  
1. 4 Sounds A(Select)  
2. 4 Warning tone A(On/Off)  
My Phone Menu  
25  
                 
Display  
Wallpaper  
You can change the wallpaper on the idle display. Idle mode  
can also change to the clock.  
From My Phone  
1. 4 Display A(Select)  
2. 4 Wallpaper @(Select)  
3. 4 required wallpaper A(Select)  
Greeting  
You can create a greeting message that is displayed each  
time the phone is switched on.  
From My Phone  
1. 4 Display A(Select)  
2. 4 Greeting @(Edit)  
3. Enter the greeting A(OK)  
4. A(On/Off)  
Animation  
You can change the animation on the display when the  
phone is powered up.  
From My Phone  
1. 4 Display A(Select)  
2. 4 Animation A(Select)  
3. 4 required animation A(Select)  
26  
My Phone Menu  
               
Contrast  
You can adjust the contrast of the display.  
From My Phone  
1. 4 Display A(Select)  
2. 4 Contrast A(Select)  
3. 4 Adjust the contrast A(OK)  
Backlight  
You can select the backlight On/Off.  
From My Phone  
1. 4 Display A(Select)  
2. 4 Backlight A(On/Off)  
Language  
T9 Input  
When you create a text this function helps to dramatically  
reduce the number of key presses.  
From My Phone  
1. 4 Language A(Select)  
2. 4 T9 Input A(Select)  
3. 4 required input type A(On/Off)  
Display languages  
It is possible to change the display language on your phone.  
From My Phone  
1. 4 Language A(Select)  
2. 4 Display languages A(Select)  
3. 4 required language A(Select)  
My Phone Menu  
27  
                   
Alerts  
You can set your phone to ring and/or vibrate when you  
receive a call or messages.  
From My Phone  
1. 4 Alerts A(Select)  
2. 4 required alert A(Select)  
The following options are available when a call is received:  
- Ring only  
- None  
- Ring & Vibrate  
- Vibrate only  
- Ring once  
Profiles  
Activating a profile  
You can switch between four profiles in your phone, each  
with a distinct combination of alert method, ringtone, etc.  
Profiles are set up for use in different environments.  
From My Phone  
1. 4 Profiles A(Select)  
2. 4 required profile A(Menu)  
3. 4 Activate A(Select)  
The following options are available:  
Suitable for everyday settings  
Normal  
Quiet  
With a ringtone, appropriate for formal  
occasions  
Suitable when in noisy environments  
Outdoor  
Headset  
Appropriate with vibrator when it is difficult  
to hear the ringtone  
28  
My Phone Menu  
                         
Setting a profile  
You can customise a profile by changing the ring volume, key  
tone, warning tone, vibrator, and/or backlight.  
Ring volume:  
From My Phone  
1. 4 Profiles A(Select)  
2. 4 required profile A(Menu)  
3. 4 Change settings A(Select)  
4. 4 Ring volume A(Select)  
5. 4 Adjust the volume level A(OK)  
Key tone:  
From My Phone  
1. 4 Profiles A(Select)  
2. 4 required profile A(Menu)  
3. 4 Change settings A(Select)  
4. 4 Key tone A(On/Off)  
Warning tone:  
From My Phone  
1. 4 Profiles A(Select)  
2. 4 required profile A(Menu)  
3. 4 Change settings A(Select)  
4. 4 Warning tone A(On/Off)  
Vibrator:  
From My Phone  
1. 4 Profiles A(Select)  
2. 4 required profile A(Menu)  
3. 4 Change settings A(Select)  
4. 4 Vibrator A(On/Off)  
Backlight:  
From My Phone  
1. 4 Profiles A(Select)  
2. 4 required profile A(Menu)  
3. 4 Change settings A(Select)  
4. 4 Backlight A(On/Off)  
My Phone Menu  
29  
Auto answer  
Auto answer can be set. To use this function, the personal  
hands free earpiece needs to be connected to the phone.  
From My Phone  
4 Auto answer A(On/Off)  
Any key answer  
Calls can be answered by pressing any key (except D).  
From My Phone  
4 Any key answer A(On/Off)  
Defaults  
All personal settings are returned to their factory default  
settings.  
From My Phone  
1. 4 Defaults A(Select)  
2. “Restore factory settings?@(Yes) or A(No)  
30  
My Phone Menu  
               
Games Menu  
Games  
................................................................................... 31  
................................................................................... 33  
Hit Mouse  
Memory  
Selecting games  
From Games menu  
4 Hit Mouse or Memory A(Select).  
NOTE: Once the power is switched off, High scores or Best scores  
may be lost.  
Hit Mouse  
When you see the mouse, press any button from1 to 9 as  
quickly as possible to hit it. Keep in mind that the cat is not  
your target.  
Example: If you press 5, you will hit the object hidden in the  
5th hole. This game will end automatically and you will be  
given a score. This score might be the highest one! Good  
luck!  
Key operation:  
Press $ ~ ,.  
Starting games:  
Select New by pressing @(New).  
Games Menu  
31  
         
To change settings:  
1. A(Menu)  
2. 4 Change settings A(Select)  
3. 4 required setting A(On/Off)  
To start the game on a level of your choice:  
1. A(Menu)  
2. 4 Level A(Select)  
3. 4 required level @(Select)  
To see the top score:  
1. A(Menu)  
2. 4 Top score A(Select)  
To see the instructions:  
1. A(Menu)  
2. 4 Instructions A(Select)  
32  
Games Menu  
Memory  
Match cards to find pairs with as few tries as you can, and  
make all cards visible. You can press keys 2, 4, 6, and 8 to  
move the cursor as you wish, and key 5 to select cards.  
When all cards are visible, you can get a score or maybe top  
score. Good luck!  
Key operation:  
Press %, ', (, ), +.  
Starting Games:  
Select New by pressing @(New).  
To change settings:  
1. A(Menu)  
2. 4 Change settings A(Select)  
3. 4 required setting A(On/Off)  
To start the game on a level of your choice:  
1. A(Menu)  
2. 4 Level A(Select)  
3. 4 required level A(Select)  
To see the top score:  
1. A(Menu)  
2. 4 Top score A(Select)  
To see the instructions:  
1. A(Menu)  
2. 4 Instructions A(Select)  
Games Menu  
33  
   
Contacts Menu  
Contacts  
SIM ...................................35  
Phone...............................35  
Browse  
Create  
SIM................................... 35  
Phone .............................. 36  
Groups  
Friends.............................38  
Colleagues.......................38  
Family ..............................38  
Others ..............................38  
VIP....................................38  
Memory status  
My Numbers  
.............................................................................................39  
.............................................................................................39  
.............................................................................................40  
Hotkey dial  
My Contacts  
SIM....................................40  
Phone...............................40  
34  
Contacts Menu  
   
Browse  
Viewing the Contacts list in your SIM/Phone  
You can search a number in the Contacts list.  
From Contacts  
1. 4 Browse > SIM or Phone A(Select)  
2. 4 required contact entry A(Menu)  
3. 4 View A(Select)  
If you press a letter key in step 2, you can jump to the first  
entry starting with the letter.  
Create  
Creating a Contacts list in SIM  
Phone numbers can be stored in your SIM.  
You can store names, phone numbers, location and record  
numbers in the SIM.  
From Contacts  
1. 4 Create A(Select)  
2. 4 SIM A(Select)  
3. Enter the name 5  
4. Enter the phone number 5  
5. A(Save)  
6. “Saved in SIM” is displayed  
NOTE: The length and amount of data are SIM dependent.  
Contacts Menu  
35  
           
Creating a Contacts list in Phone  
You can store name, phone numbers, groups and melodies  
in your phone.  
From Contacts  
1. 4 Create A(Select)  
2. 4 Phone A(Select)  
3. Enter the name 5 > Phone  
4. Enter the phone number 5 > Groups  
5. @(Set) 4 required group A(Select)  
6. @(Set) 4 required melody A(Select)  
7. When entries are completed,A(Save)  
8. “Saved in Phone” is displayed.  
The entries are grouped together and are retained even if  
you damage your SIM.  
Storing a fixed dial number in FDN  
The Fixed dial feature allows you to limit your outgoing calls  
to a certain set of numbers saved in FDN, which is located in  
your SIM. When this function is on, only the Fixed dial  
numbers can be dialled, and any attempt to call any other  
numbers will fail.  
To activate this function, you need to set Fixed Dial on. See  
From Contacts  
1. 4 Create A(Select)  
2. 4 SIM A(Select)  
3. Enter the name 5  
4. Enter the phone number 5  
5. @(Set) 4 FDN A(Select)  
6. A(Save)  
7. Enter PIN2 code > A(OK)  
8. “Saved in SIM” is displayed.  
To store a Fixed dial number, you need to enter your PIN2  
code.  
36  
Contacts Menu  
     
Options  
Edit:  
You can edit the selected Contacts entry.  
From Contacts  
1. 4 Browse > SIM or Phone A(Select)  
2. 4 required phone number or name A(Menu)  
3. 4 Edit A(Select)  
4. A(Save)  
Delete:  
You can delete the selected Contacts entry.  
From Contacts  
1. 4 Browse > SIM or Phone A(Select)  
2. 4 required phone number or name A(Menu)  
3. 4 Delete A(Select)  
4. “Delete this contact entry ?A(Yes) or @(No)  
Delete all:  
You can delete all the Contacts entries.  
From Contacts  
1. 4 Browse > SIM or Phone A(Select)  
2. 4 required phone number or name A(Menu)  
3. 4 Delete all A(Select)  
4. “Delete all entries ?A(Yes) or @(No)  
Copy to Phone/SIM:  
You can copy the selected Contacts entry to the phone or  
your SIM.  
From Contacts  
1. 4 Browse > SIM or Phone A(Select)  
2. 4 required phone number or nameA(Menu)  
3. 4 Copy to Phone/SIM A(Select)  
4. “Copy entry to Phone/SIM ?A(Yes) or @(No)  
Contacts Menu  
37  
     
Copy all to Phone/SIM:  
You can copy all the Contacts entries to the phone or SIM.  
From Contacts  
1. 4 Browse > SIM or Phone A(Select)  
2. 4 required phone number or name A(Menu)  
3. 4 Copy all to Phone/SIM A(Select)  
4. “Copy all entries to Phone/SIM ?A(Yes) or  
@(No)  
Search:  
You can search for a name in the Contacts list.  
From Contacts  
1. 4 Browse > SIM or Phone A(Select)  
2. A(Menu)  
3. 4 Search A(Select)  
4. Enter the first letter of the required name A(Select)  
Groups  
You can categorise the items stored in your phone into 5  
groups: Friends, Colleagues, Family, Others and VIP.  
You can select a particular ringtone for each group to identify  
the incoming call.  
From Contacts  
1. 4 Groups A(Select)  
2. 4 required Group A(Menu)  
The following options are available :  
View  
View the Contacts entries in the selected  
group  
Set ringtone  
Set the required ringtone  
Remove entries  
Delete all the Contacts entries in the  
selected group  
If there is no entry stored in the selected group, “List empty”  
is displayed.  
38  
Contacts Menu  
       
The following options are available by pressing A(Menu)  
after you select an entry from the selected group:  
View  
View the selected Contacts entry  
Edit the selected Contacts entry  
Delete the selected Contacts entry  
Edit  
Delete  
Search  
Search for a desired item in the selected  
group by entering the name.  
Memory status  
Memory status shows how many locations are available in  
the Contacts list.  
Maximum memory capacity:  
- Phone 250 locations  
- SIM (SIM dependent)  
From Contacts  
4 Memory status A(Select)  
My Numbers  
My Numbers is a handy phonebook where names and phone  
numbers can be stored and viewed.  
From Contacts  
1. 4 My Numbers A(Select)  
2. 4 required entry A(Menu)  
3. 4 Edit A(Select)  
4. Enter your phone number 5  
5. Enter your name A(Save)  
The following options are available by pressing A(Menu)  
when you select the required entry:  
View  
Edit  
View the selected My Numbers entry  
Edit the selected My Numbers entry  
Delete the selected My Numbers entry  
Delete  
Contacts Menu  
39  
         
Hotkey dial  
Setting Hotkey dial  
You can quickly dial phone numbers stored at locations 001  
- 009 in the Contacts list.  
From Contacts  
4 Hotkey dial A(On/Off)  
NOTE: This function is SIM dependent.  
Making a call by using Hotkey dial  
From idle mode  
1. Press and hold a numeric key ($ ~ ,)  
2. Press C  
My Contacts  
You can select SIM or Phone so that the Contacts list directly  
accessed from idle mode is set to the SIM or Phone Contacts  
list.  
From Contacts  
1. 4 My Contacts A(Select)  
2. 4 SIM or Phone A(Select)  
40  
Contacts Menu  
           
Calendar  
Calendar  
New event  
You can organise your Calendar to remind you of a personal  
event, such as a holiday period or birthday.  
You need to set the clock, day and time before entering  
anything in the Calendar.  
From Calendar  
1. @ to select Week or Month format  
2. To select a day, press numeric keys 2, 8, 4 and 6 to  
move the cursor Ç, È, Å and Æ respectively, to set the  
desired day. A(Agenda)  
3. <New entry> A(Select)  
4. @(Set) to select a type of event from Memo and  
Meeting A(Select)  
5. 4 to enter Description  
6. 4 to enter Start date  
7. 4 to enter Start time  
8. 4 to enter End date  
9. 4 to enter End time A(Save).  
Ensure that Calendar settings will not contravene any  
regulations by switching on automatically when in an aircraft,  
medical facility, etc. – (see “Operating Instructions Part 2”.)  
Calendar  
41  
       
View event  
From Calendar  
1. @ to select Week or Month format  
2. When Month format is selected:  
Select a day by using the numeric keys (1, 5, 2, 4, 6  
and 8) A(Agenda)  
When Week format is selected:  
Schedule icon(s) will be shown corresponding to a  
period of time selected by pressing 4.  
(Period of time : 4=0:00-3:59, 8=4:00-7:59, 12=8:00-  
11:59, 16=12:00-15:59, 20=16:00-19:59, 24=20:00-  
23:59)  
Select a day by using the numeric keys (2,4,6 and 8)  
A(Agenda)  
3. 4 required schedule @(View)  
4. To return to the previous display, A(OK)  
To edit @(Edit), edit the required information  
A(Save).  
<Example>  
Agenda:2004/02/10 Start 0:00~End 3:00  
Scheduled day  
Scheduled time period  
Agenda Month  
Scheduled icon  
=
=
=
0:00~ 3:59  
4:00~ 7:59  
8:00~11:59  
= 12:00~15:59  
= 16:00~19:59  
= 20:00~23:59  
Press  
4
to change the schedule icon into  
different periods of time.  
42  
Calendar  
   
Key Guard  
Key Guard  
The Key Guard function is used to prevent any keys from  
being accidentally pressed, e.g. when the phone is being  
carried.  
From Key Guard  
1. A(Yes) or @(No)  
When Key Guard is enabled, L appears on the display.  
Emergency calls are still possible.  
When a call is received, Key Guard will be disabled  
temporarily, and you can answer the call  
NOTE: When making emergency calls with the “Key Guard”  
enabled, there will be no visual indication that the number is being  
dialled.  
When L appears on the display, A(Free) > “Press ok to  
free keypadA(OK) .  
Key Guard  
43  
   
Messages Menu  
Messages  
............................................................................................. 45  
Create  
.............................................................................................48  
.............................................................................................49  
Inbox  
Outbox  
Inbox .............................50  
Outbox ..........................50  
Archive  
User Messages  
Memory status  
Settings  
.............................................................................................51  
............................................................................................. 51  
Message centre...............51  
Protocol ...........................52  
Validity period.................52  
Delivery report ................52  
Cell Broadcast  
Topic list ......................... 53  
Read Messages .............. 53  
Languages ...................... 54  
Auto display.................... 54  
44  
Messages Menu  
       
Create  
Message centre  
It is possible to receive, display, edit and/or send text  
messages of up to 1520 characters in 10 messages  
(depending on the language), to the network that has a  
roaming agreement (depending on the recipient’s phone  
options). Before sending a message, you need to enter the  
Message centre number into Settings.  
From Messages  
1. 4 Settings > Message centre A(Select)  
2. Enter the message centre number in the international  
dial format  
13 A(OK)  
)
NOTE: Your network operator may have pre-programmed this  
number. Do not change this number as it may cause the failure of  
SMS Messaging.  
Messages Menu  
45  
     
Creating a message  
From Messages  
1. 4 Create A(Select)  
2. Create your text message – max. 1520 characters  
3. 4 Send A(Select)  
4. Enter the destination phone number A(OK)  
OR  
Recall a number from Contacts @(Names) >  
4 required name A(Select) > A(OK)  
When you create a text, these options are available by  
pressing A(Menu):  
Send  
Send text as a Short Text message  
Save text in the Outbox in your SIM  
Save  
Save and send  
Save text in the Outbox in your SIM and  
send it  
Picture & sound  
User Messages  
Add a picture and/or sound to the text. See  
Use a short message stored in the phone  
For editing the User Message, see “User  
You can change T9® mode On/Off pressing !.  
46  
Messages Menu  
 
EMS (Enhanced Message Service)  
You can add a picture and sound to an SMS.  
Picture:  
From Messages  
1. 4 Create A(Select)  
2. Create your text message A(Menu)  
3. 4 Picture & sound A(Select)  
4. 4 required picture A(Select)  
Sound  
From Messages  
1. 4 Create A(Select)  
2. Create your text message A(Menu)  
3. 4 Picture & sound A(Select)  
4. @(Sound)  
5. 4 required sound A(Select)  
Messages Menu  
47  
   
Inbox  
Viewing a received message  
When a Short Text Message is received, the message  
indicator will flash on the display and a user preset audible  
alert will sound. If you are on a call you will be alerted by the  
vibrator.  
flashes when an unread message is received in the Inbox.  
When the Inbox is full,  
deleted.  
will remain until old messages are  
From Messages  
1. 4 Inbox A(Select)  
2. 4 required message A(Menu)  
3. 4 View A(Select)  
NOTE: If the message indicator is displayed constantly (does not  
flash), this means that the message area is full, and you need to  
delete old messages in order to receive new messages.  
When reading messages, the following options are available  
by A(Menu)  
:
Delete  
Reply  
Forward  
Edit  
Delete a message  
Create an SMS reply  
Forward a message to another phone  
Edit a message and save and/or send it to  
somebody else  
Delete all  
Delete all messages in Inbox  
Extract Number  
Extract numbers in messages and save in  
Contacts  
Move to Archive  
Move a message to Archive Inbox  
48  
Messages Menu  
   
Outbox  
Viewing a sent message  
A list of sent message is stored in your SIM. You can select  
a message from the list and view it.  
From Messages  
1. 4 Outbox A(Select)  
2. 4 required message A(Menu)  
3. 4 View A(Select)  
While you are reading a message, the following options are  
available by pressing A(Menu):  
Delete  
Edit  
Delete a message  
Edit a message and save and/or send it to  
somebody else  
Send  
Send an SMS message after entering a  
recipient number  
Delete all  
Delete all messages in Outbox  
Extract Number  
Extract numbers in messages and save in  
Contacts  
Move to Archive  
Move a message to Archive Outbox  
Messages Menu  
49  
   
Archive  
Viewing a stored message  
To view the list of messages which are stored in Archive.  
Inbox: When a message saved in the Inbox is moved into  
Archive, the message will be saved in the Archive Inbox.  
Outbox: When a message saved in the Outbox is moved  
into Archive, the message will be saved in the Archive  
Outbox.  
From Messages  
1. 4 Archive A(Select)  
2. 4 Inbox or Outbox A(Select)  
3. 4 required message A(Menu)  
4. 4 View A(Select)  
When reading a message, the following options are available  
by A(Menu):  
Send (Outbox)  
Edit  
Send a message to another phone  
Edit a message and save and/or send it to  
somebody else  
Delete  
Delete a message  
Forward (Inbox)  
Delete all  
Forward a message to another phone  
Delete all messages in Archive Inbox/  
Outbox  
50  
Messages Menu  
     
User Messages  
You can edit the preset User Messages, then save them for  
later use  
.
From Messages  
1. 4 User Messages A(Select)  
2. 4 required message A(Select)  
3. Edit the message A(Menu)  
4. 4 Save and send or Save A(Select)  
NOTE: If the text is wider than the screen display, the text will  
scroll.  
Memory status  
Memory status shows how many locations are left to store  
messages in the Inbox.  
From Messages  
4 Memory status A(Select)  
The maximum memory capacity:  
- SIM (SIM dependent – max. 100 locations)  
- Phone 50 locations  
- Archive 50 locations  
Settings  
Message centre  
Before sending any messages, you need to enter your  
Message centre number. This number is provided by your  
service provider.  
From Messages  
1. 4 Settings A(Select)  
2. 4 Message centre A(Select)  
3. Enter your Message centre number  
Messages Menu  
51  
             
Protocol  
The Message centre is able to convert your message to the  
format specified by the selected protocol.  
From Messages  
1. 4 Settings A(Select)  
2. 4 Protocol A(Set)  
3. 4 Select required setting from Standard text, Fax,  
X.400, Paging, E-mail, ERMES, or Voicemail  
A(Select)  
Validity period  
You can set the duration that your message is stored at the  
Message centre.  
From Messages  
1. 4 Settings A(Select)  
2. 4 Validity period A(Set)  
3. 4 Select required setting from Maximum, 1 Hour, 12  
Hours, 1 Day, or 1 Week A(Select)  
Delivery report  
You can request a delivery report regarding the status of a  
sent message.  
From Messages  
1. 4 Settings A(Select)  
2. 4 Delivery report A(On/Off)  
52  
Messages Menu  
     
Cell Broadcast  
Topic list  
You can receive your favourite information regularly from  
your service provider.  
You need to specify the “topic(s)” of information and the  
language in which you wish to receive this information.  
To receive the broadcasts, “Cell Broadcast” must be on.  
From Messages  
1. 4 Cell Broadcast > Topic list > Current> A(Select)  
2. 4 required topic A(Menu)  
3. 4 Add or Delete A(Select)  
User defined topic  
From Messages  
1. 4 Cell Broadcast > Topic list> User defined >  
<New entry> A(Select)  
2. Enter msg ID A(OK)  
3. Enter the name A(OK)  
4. 4 Current A(Select)  
5. 4 < Add topic > A(Select)  
6. 4 required Topic A(Select)  
Reading a message  
From Messages  
1. 4 Cell Broadcast A(Select)  
2. 4 Read Messages A(Select)  
3. A(Next) to select the required topic  
NOTE: This function will depend on your network service operator.  
Messages Menu  
53  
       
Language  
You can set the language of the message you receive.  
From Messages  
1. 4 Cell Broadcast A(Select)  
2. 4 Display Languages A(Select)  
3. 4 required language above which you wish to insert a  
new language  
4. 4 Insert A(Select)  
5. 4 required language A(Select)  
The added language is displayed above the language you  
selected in step 3.  
If you wish to add a new language to the end of the list,  
select “Add to end” in step 4.  
To resume a language, select “Delete” in step 4.  
Auto display  
In idle mode, the latest Info Message is displayed on your  
phone automatically.  
From Messages  
1. 4 Cell Broadcast A(Select)  
2. 4 Auto display A(On/Off)  
54  
Messages Menu  
   
Phone Menu  
Phone Menu (or STK)*  
Call Service  
Call Diverts  
Time/Charges ..................56  
Call waiting......................56  
Withhold ID......................56  
Caller’s ID ........................57  
Charge settings...............57  
All voice calls ..................59  
Not reachable ..................59  
No reply............................59  
Busy .................................59  
Status check....................59  
Cancel all .........................59  
Call bar.............................60  
Codes ...............................61  
Fixed dial..........................62  
SIM lock............................62  
Security  
Network  
Auto network...................63  
New network....................63  
Network list .....................63  
Band.................................63  
*STK (SIM Tool Kit) is SIM dependent.  
NOTE: If SIM card provides SIM Tool Kit services (STK), this menu will become the STK Menu.  
You can still access Phone Menu from Application.  
Phone Menu  
55  
   
Call Service  
Viewing time/charges  
From Phone Menu  
1. 4 Call Service > Time/Charges A(Select)  
2. 4 Last call, All voice calls or Cost left A(Select)  
Last call  
Display the duration of last call  
All voice calls  
Cost left  
Display the total duration for all voice calls  
If Max cost is on, display the remaining  
units.  
Call waiting  
If Call waiting is switched on, a second call can be received.  
Turn this function on before making a multiparty (conference)  
call.  
From Phone Menu  
1. 4 Call Service > Call waiting A(Select)  
2. 4 Set, Clear or Check status A(Select)  
Withhold ID  
Withhold ID allows you to prevent showing your name and/or  
number to the calling party.  
From Phone Menu  
1. 4 Call Service A(Select)  
2. 4 Withhold ID A(Select)  
NOTE: When checking the status, the phone must be registered to  
a network.  
56  
Phone Menu  
               
Caller’s ID  
Caller’s ID allows you to display the Caller’s name and/or  
number on your display.  
From Phone Menu  
1. 4 Call Service A(Select)  
2. 4 Caller’s ID A(Select)  
NOTE: When checking the status, the phone must be registered to  
a network.  
Charge settings  
NOTE: The duration of one unit may vary between peak and off-  
peak times. Call charges can be calculated accordingly. However,  
the actual tariffs charged by your service provider may not be  
reflected in the calculation.  
Currency:  
Firstly, Personal rate must be entered. This is the cost that  
the service provider charges for one unit of call time. See  
From Phone Menu  
1. 4 Call Service > Charge settings A(Select)  
2. 4 Currency A(Select)  
Current setting is displayed  
3. @(Set) > Enter PIN2 codeA(OK)  
4. Enter currency units (max. 3 characters) A(OK)  
NOTE: This function is SIM dependent  
Phone Menu  
57  
       
Personal rate:  
From Phone Menu  
1. 4 Call Service > Charge settings > Personal rate  
A(Select)  
2. @(Set)  
3. Enter PIN2 code A(OK)  
4. Enter your personal rate A(OK)  
NOTE: When you set the unit price, you are asked to enter your  
PIN2.  
NOTE: This function is SIM dependent  
Maximum cost:  
You can set the maximum cost of calls allowed.  
From Phone Menu  
1. 4 Call Service > Charge settings A(Select)  
2. 4 Max cost A(Set)  
Current setting is displayed.  
3. @(Edit) > Enter PIN2 code A(OK)  
4. @(Set) >4 On A(Select)  
5. 5 Enter Credit limit > A(OK)  
NOTE: This function is SIM dependent  
Auto display:  
In idle mode, the cost of the latest Incoming call is displayed  
on your phone automatically.  
From Phone Menu  
1. 4 Call Service > Charge settings A(Select)  
2. 4 Auto display A(On/Off)  
58  
Phone Menu  
       
Call Diverts  
From Phone Menu  
1. 4 Call Diverts A(Select)  
2. 4 Select the circumstances to initiate the divert  
A(Select)  
3. 4 Set, Clear, or Check status A(Select)  
4. Enter the phone number to divert to A  
Enter the voice mail centre number if you wish incoming  
voice calls to be diverted to the voice mail centre.  
When a divert situation is enabled, the divert icon ( G ) is  
displayed.  
When updating or checking the status of Call Divert, the  
phone must be registered to a network. (  
)
All voice calls  
Not reachable  
Divert all incoming voice calls  
When you are not in a coverage area, divert  
incoming voice calls  
No reply  
Busy  
If you do not answer the phone, divert  
incoming voice calls  
When a call is in progress, divert incoming  
voice calls  
Status check  
Cancel all  
Check the current Call Diverts status  
Cancel all Call Diverts settings  
Voice calls can be diverted to voicemail box or to a  
number that you specify.  
Phone Menu  
59  
               
Security  
Call bar  
Call barring restricts certain outgoing and/or incoming calls  
using a password supplied by your service provider. When  
updating/checking the status of Call bar, the phone must be  
registered to a network.  
From Phone Menu  
1. 4 Security > Call bar A(Select)  
2. 4 required setting from the table shown below  
A(Set) or A(Select)  
3. 4 required operation from Set, Clear or Check status  
A(Select)  
4. Enter required password A(Select)  
All outgoing  
Outgo int’l.  
All outgoing calls are barred  
International outgoing calls are barred  
Out. int’l. x home  
International outgoing calls except to your  
home country are barred  
All incoming  
All incoming calls are barred  
When roaming  
All international incoming calls when  
roaming outside the home PLMN are barred  
Status check  
Cancel all  
Call bar status is displayed  
Cancel all Call bar settings  
Change Call bar password  
Password  
60  
Phone Menu  
       
Codes  
Change phonecode:  
The Phonecode is used for the SIM lock, which protects the  
phone from being used with a SIM other than yours.  
From Phone Menu  
1. 4 Security > Codes A(Select)  
2. 4 Change phonecode A(Select)  
3. Enter a new phonecode A(OK)  
4. Enter the new phonecode to verify A(OK)  
PIN control:  
The PIN protects your SIM against unauthorised use. If you  
enable the PIN, every time the phone is switched on you will  
be prompted to enter the PIN.  
From Phone Menu  
1. 4 Security > Codes A(Select)  
2. 4 PIN Control  
3. Enter PIN number A(OK)  
4. 4 Set to either enable or disable the PIN @(Set).  
5. A(OK)  
Changing PIN/PIN2:  
From Phone Menu  
1. 4 Security > Codes A(Select)  
2. 4 Change PIN or Change PIN2 A(Select)  
3. Enter the current code A(OK)  
4. Enter the new code A(OK)  
5. Enter the new code to verify A(OK)  
#
. You will then be  
NOTE: To enter the PUK code for your PIN, enter **05  
enter the PUK2 code for PIN2, enter **052  
prompted to enter the PUK code. Follow the on-screen instructions. To  
. You will then be prompted to  
enter the PUK2 code. Follow the on-screen instructions. If the PUK/PUK2  
code is entered incorrectly 10 times, the phone will cease to operate  
permanently. All information stored in the SIM will be lost and the SIM will  
need to be replaced. Contact the service provider for more details.  
#
Phone Menu  
61  
     
Fixed dial:  
The Fixed dial feature allows you to limit your outgoing calls  
to a certain set of numbers saved in FDN, which is located in  
your SIM. When this function is on, only the Fixed dial  
numbers can be dialled, and any attempt to call any other  
number will fail.  
From Phone Menu  
1. 4 Security A(Select)  
2. 4 Fixed dial A(Select)  
3. Enter PIN2 code A(OK)  
4. @(Set)  
5. A(OK)  
When Fixed dial is on, any manually dialled phone  
numbers must be the same as the numbers in the Fixed  
Dial Store, otherwise the call cannot be made.  
A phone number may be stored, edited or deleted. You  
will be prompted for your PIN2 code.  
SIM lock:  
Once you enable the SIM lock, you will be prompted to enter  
your phonecode when you switch on the phone with a  
different SIM inserted.  
From Phone Menu  
1. 4 Security A(Select)  
2. 4 SIM lock A(Select)  
3. Enter phonecode A(OK)  
4. A(Set) to set the SIM lock on/off  
5. A(OK)  
NOTE: Your phonecode must be 4 to 8 digits. You are advised to write  
down your phonecode. If the phonecode is entered incorrectly 3 times,  
the phone will cease to operate permanently.  
62  
Phone Menu  
       
Network  
Setting:  
From Phone Menu  
You can select a network that is available in your current  
location.  
1. 4 Network A(Select)  
2. 4 Select one of the settings below A(On/Off) or  
A(Select)  
Auto network  
New network  
Set Auto network on or off.  
When Auto Network is on, search an available  
network automatically. When Auto network is  
off, you must select a network manually.  
Network list  
Band  
Create and edit a network list according to  
your preferences.  
Choose a network band: 900/1800, 900/  
1900, 900, 1800, 1900 MHz.  
NOTE: This function is SIM dependent  
Phone Menu  
63  
           
Application Menu  
Application  
Settings........................... 65  
Alarm............................... 66  
Power off time ................ 66  
Clock  
.............................................................................................67  
Calculator  
............................................................................................ 67  
............................................................................................ 68  
.............................................................................................69  
Currency  
Melody composer  
(Phone Menu)*  
64  
Application Menu  
   
Clock  
Settings  
Time zone:  
From Application  
1. 4 Clock > Settings > Time zone A(Select)  
2. 4 required region A(Select)  
3. “Daylight saving?A(Yes) or @(No)  
4. “Set this zone to local@(OK)  
5. “Success!A(OK)  
Time & date:  
From Application  
1. 4 Clock > Settings > Time & date A(Select)  
2. @(Set) to enter the date and the time A(OK)  
Date format:  
You can select the desired display format for the time and  
date.  
From Application  
1. 4 Clock > Settings > Date format A(Set)  
2. 4 required format A(Select)  
Time format:  
From Application  
1. 4 Clock > Settings > Time format A(Set)  
2. 4 required format A(Select)  
Application Menu  
65  
             
Display time:  
You can show the time and date on the display in idle mode.  
From Application  
1. 4 Clock > Settings A(Select)  
2. 4 Display time A(On/Off)  
Alarm:  
From Application  
1. 4 Clock > Alarm A(Set)  
2. A(Set) > Enter the time (24 hour clock) A(OK)  
3. 4 Repeat daily, Once or Disabled A(Select)  
4. “Alarm time has been updated!A(OK)  
The alarm set indicator appears on the idle display.  
When the set time is reached, the alarm will sound.  
If you are on a call, the phone will vibrate without sound.  
To stop the alarm:  
Press any key or A(Off)  
OR  
@(Pause) to pause the alarm and start again after 5  
minutes  
NOTE: Even if the phone is switched off, when the Alarm is set on,  
the phone will switch on automatically and start the alarm.  
Power off time  
The phone can be set to turn itself off automatically at a  
specified time using the Power off feature.  
From Application  
1. 4 Clock > Power off time A(Set)  
2. Enter the time (24 hour clock) A(OK)  
3. 4 Repeat daily, Once or Disabled A(Select)  
4. “Power off time setting updated!A(OK)  
66  
Application Menu  
         
Calculator  
You can use the 4 function calculator (addition, subtraction,  
multiplication and division) to make simple arithmetic  
calculations.  
From Application  
1. 4 Calculator A(Select)  
2. Enter a number (max. 9 digits). It will be displayed on the  
upper right of the display. If a decimal point is required,  
press !, when a minus sign is needed press ".  
3. 4 to select the arithmetic operation  
4. Enter a number (max. 9 digits). It will be displayed next  
to the operation symbol.  
If 4 is used to select another arithmetical operation to  
perform, an intermediate calculation will be performed  
and the result will be displayed.  
5. A (=) to calculate  
Currency  
Rate setting  
The currency convertor enables you to convert from/to a  
home currency using a conversion rate that you enter.  
Before beginning conversions, choose a base currency and  
enter the conversion rate. The base currency rate is set to 1.  
From Application  
1. 4 Currency A(Select)  
2. 4 Rate setting A(Select)  
3. Enter the conversion rate next to the pencil icon  
A(OK)  
4. A(Save)  
You can change the base currency by pressing 4.  
If a decimal point is required, press !  
Application Menu  
67  
         
Rate computing  
From Application  
1. 4 Currency A(Select)  
2. 4 Rate computing A(Select)  
3. Enter the amount of your currency to convert into the  
other currency A(Convert)  
You can change the base currency by pressing 4.  
If a decimal point is required, press !  
Melody composer  
Composing a melody  
From Application  
1. 4 Melody composer A(Select)  
2. 4 required My Music A(Select)  
3. 4 Melody edit A(Select)  
4. 4 required track A(Select)  
5. Compose your melody - See the notes chart below  
A(Menu)  
6. 4 Save A(Select)  
Using the following table as a reference, enter notes (from  
the choice of low, middle and high), rests, and duration of  
each, to generate your composition. Main Track and Sub  
Tracks are played together when you play the composed  
music.  
Key  
$
%
&
(
)
'
Func  
C
D
E
F
G
A
Key  
*
+
,
#
"
!
Low,  
Low #,  
Middle,  
Middle #,  
High,  
Dotted  
note  
Func  
B
Rep.  
Rest  
Duration  
High #  
68  
Application Menu  
     
Play  
To play the composed melody before saving:  
A(Menu) > 4 Play A(Select)  
Tempo  
Before you save the composed melody, you can change the  
tempo, and/or the instrument to play the melody.  
To arrange the tempo of the composed melody:  
1. A(Menu) > 4 Tempo A(Select)  
2. 4 required tempo A(Select)  
Select instrument  
You can select the instrument to play the composed melody:  
A(Menu) > 4 Select instrument A(Select)  
Phone menu  
This menu is available under the Application Menu if your  
SIM card provides STK services.  
Application Menu  
69  
   
Records Menu  
Records  
Last dialled  
............................................................................................ 70  
Answered  
............................................................................................ 70  
............................................................................................ 70  
Unanswered  
Delete all  
............................................................................................ 70  
Last dialled/Answered/Unanswered number  
Recently dialled phone numbers will be stored in Last dialled.  
(max. 50)  
If an incoming call with Caller’s ID is answered, the number  
will be stored in Answered (max. 50).  
If an incoming call with Caller’s ID is not answered, the  
number will be stored in Unanswered (max 20).  
From Records  
1. 4 Choose one menu from Last dialled, Answered or  
Unanswered A(Select)  
OR  
In idle mode, C to view the last dialled numbers  
directly  
2. 4 required phone number (or name) you wish to redial  
C
Delete all  
From Records  
1. 4 Delete all A(Select)  
2. “Delete all calls?A(No) or @(Yes)  
70  
Records Menu  
       
Accessories  
Li-Ion Battery (EB-BSA10)  
Double your talk time by having a spare battery.  
Rapid Charger (EB-CAD55UK)  
Carry a lightweight portable charger wherever you go to  
ensure you always have power to talk.  
Rapid Charger (EB-CAD55EU)  
Carry a lightweight portable charger wherever you go to  
ensure you always have power to talk.  
Personal handsfree (EB-EMG70)  
Talk and move while keeping your hands free, by using a  
personal handsfree. Put the ear piece in your ear and the  
adaptor in the side of the handset, and talk.  
How to Identify a Genuine Panasonic Accessory  
Panasonic produces some of the most advanced mobile phones available. So, as  
you’d expect from this class leader, the range of accessories are second to none.  
Most genuine Panasonic accessories will have a label showing an “EB-XXX00”  
model number.  
NOTE: Accessories are subject to change without notice.  
Accessories  
71  
           
Troubleshooting  
Should any problem persist, contact your dealer.  
Problem  
Cause  
Remedy  
Phone will not switch  
on.  
Check that the battery is fully charged  
and correctly connected to the phone.  
Extremely short  
battery life for a new  
battery.  
The network you are using  
and the condition of the  
battery can affect battery  
life.  
Short battery life for an The battery has worn out. Replace with a new fully charged  
old battery. battery.  
The charging indicator The battery is not attached Leave the phone charging the battery  
does not light, the to the phone, or when the for a few minutes before the indicator  
battery level indicator battery has been deeply lights and your attempt to switch the  
does not appear and discharged, the phone will phone on.  
the phone cannot be  
switched on when  
charging.  
take a short time until the  
indicator lights.  
Battery fails to charge. The battery is not attached Ensure the battery is fitted to the  
to the phone.  
phone prior to commencing charging.  
Battery was connected to  
the phone after the Fast  
Travel Charger was  
switched on.  
indicates abnormal  
charging.  
Replace with a new battery.  
Unlock the phone.  
Battery is defective or of  
the wrong type.  
Calls cannot be made. The phone is locked.  
Outgoing calls are barred. Disable outgoing call barring or barred  
dialling.  
The phone is not  
registered to a network.  
Move to a coverage area and operate  
your phone after it has registered with  
a network.  
Calls cannot be made  
from Fixed Dial Store.  
Check whether your SIM supports  
Fixed dial.  
Check if Fixed dial is switched on.  
Check whether the phone number is  
stored in Fixed Dial.  
72  
Troubleshooting  
   
Problem  
Cause  
Remedy  
Calls cannot be  
received.  
The phone is not switched Switch the phone on.  
on.  
Incoming calls are barred. Disable incoming call barring.  
The phone is not  
registered to a network.  
Move to a coverage area and operate  
your phone after it has registered with  
a network.  
Emergency calls  
cannot be made.  
You are not in a GSM  
coverage area.  
Check that the antenna symbol (  
is displayed – move to a coverage  
area and operate your phone when  
the antenna symbol is displayed.  
)
Phone numbers  
cannot be recalled  
from Contacts list.  
The phone is locked.  
Unlock the phone.  
Phone number has been Switch off restriction.  
restricted.  
Troubleshooting  
73  
Important Error Messages  
These are some of the most important error messages which may be displayed:  
New codes not same  
When you change your password, you must enter the new  
password twice to confirm. The two codes you entered are not  
the same. Enter the same code twice.  
Password invalid  
The password that you entered is not valid. Enter the correct  
password.  
New PIN not accepted  
New PIN2 not accepted  
Incorrect entry!  
Your new PIN code was not accepted. Please try again.  
Your new PIN2 code was not accepted. Please try again.  
You entered your PIN or PIN2 code incorrectly. Enter the  
correctly.  
Entries do not match!  
Invalid password  
When you change your password, you must enter the new  
password twice to confirm. The two codes you entered are not  
the same. Enter the same code twice.  
The reply message from network when you activate call barring  
with the incorrect password.  
Enter the correct password.  
SIM service not support  
The function you selected is not supported by your service  
provider. Please contact your service provider.  
Insufficient space!  
Continue?  
The SIM storage area is full. If you continue, data may be lost.  
Please delete old records.  
Not enough space!  
Continue?  
The message storage area is full. If you continue, data may be  
lost. Please delete old records.  
Authentication failure  
Your SIM card is not registered with your service provider.  
Please contact your service provider.  
Blocked  
Your SIM card is blocked. Please contact your service provider.  
74  
Important Error Messages  
 
Glossary of Terms  
DTMF  
Dual Tone Multi-Frequency tones allow you to communicate with  
computerised phone systems, voice mailboxes, etc.  
FDN  
Fixed Dial Number. Used to restrict outgoing calls to a certain set of  
numbers.  
GSM  
Global System for Mobile communications. The name given to the  
advanced digital technology that your phone uses.  
Network  
Operator  
The organisation responsible for operating a GSM network.  
Password  
PIN  
Used for the control of Call Bar.  
Personal Identification Number used for SIM security. Supplied by your  
service provider. If the PIN is entered incorrectly 3 times, the PIN will be  
blocked.  
PIN2  
Personal Identification Number used for the control of Fixed Dial Store  
and Call Charge metering. Supplied by your service provider. If the  
PIN2 is entered incorrectly 3 times, the PIN2 will be blocked.  
PLMN  
Public Land Mobile Network. A network that provides land mobile  
telecommunications services.  
PUK/PUK2  
PIN/PIN2 Unblocking Key. Used to unblock the PIN/PIN2 code.  
Supplied by your service provider. If the PUK/PUK2 is entered  
incorrectly 10 times, the PUK/PUK2 will be blocked.  
Registration  
Roaming  
The act of logging on to a GSM/GPRS network. This is usually  
performed automatically by your phone.  
The ability to use your phone on networks other than your home  
network.  
Service  
Provider  
The organisation responsible for providing access to the GSM/GPRS  
network.  
SIM  
Subscriber Identity Module. A small smart-card which stores unique  
subscriber and user-entered information such as Contacts entries and  
short messages. Supplied by your service provider.  
SMS  
Short Message Service. A basic mail system used for cellular phones.  
This service allows sending/receiving of short text messages.  
Glossary of Terms  
75  
   
Index  
Viewing time/charges ........ 56  
Creating in Phone ............. 36  
Creating in SIM ................. 35  
A
Personal handsfree ........... 71  
Any key answer ................ 30  
B
Fitting and removing ............ 1  
C
Call  
Answering a call ............... 14  
Incoming call while on a call 17  
Making a second call ......... 16  
D
Last number dialling .......... 12  
E
76  
Index  
 
N
F
G
H
I
O
P
Switching on/off ................ 12  
R
K
S
Fitting and removing ............ 3  
L
Display Languages ........... 27  
M
T
T9® Input ............................... 27  
T9® Text Input ....................... 20  
U
V
Index  
77  

Toastmaster TCM10DWCAN User Manual
Seagate SAVVIO ST9146603SS User Manual
Seagate MOMENTUS THIN ST160LT014 9YK14D User Manual
Seagate Constellation ST32000444SSIM User Manual
Samsung Intrepid I350 User Manual
Samsung A847M User Manual
Philips KEY0079 User Manual
Panasonic CQ RX400U User Manual
Oregon Scientific RM383PA User Manual
Nokia 7373 User Manual