PYLE Audio PLCG53 User Manual

OWNER'S MANUAL  
COMPACT DISC PLAYER WITH  
SUPER POWER OUTPUT  
FACE DETACHABLE PANEL  
FM-AM FM-MPX RADIO RECEIVER  
MODEL : PLCD52/PLCG53  
P / N : 570-931612-03  
11. CD CONTROL  
Press this button to activate the CD mode.  
Note : If you press this button during radio mode, the radio mode will stop play automatically and the CD mode will  
be activated.  
CD PAUSE (OPTIONAL)  
During the CD is playing, press this button again will pause the CD playing.  
12. PRE-SCAN/AUTO-STORE BUTTON  
This button allows you to enjoy "Preset Memory Scan" function by pushing it within 2 seconds, and allows you enjoy "Auto-Store  
Memory" function at pushing it continuously more than 2 seconds.  
*PS (PRESET MEMORY SCAN )  
It calls the memorized station frequencies ( from 1-6 ) automatically every 5 seconds.  
*AS (AUTO-STORE MEMORY )  
It searches all station frequencies upward and memorize automatically 6 stations by catching the frequency which has scan-  
stop level, the memorized station is shown on LCD as "CH1...6". After memorizing, auto-store memory function will be  
changed to "Preset Memory Scan" function automatically.  
13. LOUD CONTROL  
Press this button to activate the loudness circultry which compensates for loss of high and low frequencies during low volume  
levels.  
14. MUTE CONTROL  
Press this button to mute the volume control and "MUT" will appear on LCD display.  
15. AUDIO SELECTOR  
Press this button to select "VOLUME/BASS/TREBLE/BALANCE/FADER" adjustment modes. Each time button is pressed,  
acessed selection is displayed. While selection is being displayed, press (within 5 sec.) AUDIO CONTROL buttons + or - to  
adjust level as desired.  
16/17 AUDIO LEVEL Down Control ( - Button ) / AUDIO LEVEL Up Control ( + Button )  
With the exception of VOLUME, to access all other adjustment modes "BASS/TREBLE/BAL/FADER", first press SEL button then the  
+ or - button . Press and release to change level slightly, repeatedly for slow adjustments, or press and hold to adjust rapidly. Display will  
show level increments.  
• VOLUME - Press the AUDIO CONTROL + button to increase, or - button to decrease sound level.  
• BASS - While "BAS" is being displayed, press the AUDIO CONTROL + button to increase or - button to decrease the bass level.  
• TREBLE - While "TRE" is being displayed, press the AUDIO CONTROL + button to increase or - button to decrease the treble level.  
• BALANCE - While "BAL" is being displayed, press the AUDIO CONTROL + or - button to level balance of speaker right and left.  
• FADER - While "FAD" is being displayed, press the AUDIO CONTROL + or - button to level balance of front speakers and rear  
speakers /LINE OUT jacks.  
REMARK : BASS AND TREBLE CONTROLS CAN NOT BE USED WHEN DSP MODE IS SELECTED ( ROCK, POP, CLASSIC,  
FLAT ).  
18/19. MANUAL UP/DOWN TUNING / TRACK SEEK UP/DOWN CONTROL  
On radio mode, press this button will tune one frequency step higher or lower. On CD mode, press this button will locate the  
beginning of the track being played or will locate the beginning of the next track. When pressing more than 2 seconds, it will  
move fast forward or fast backward to a specific position of a CD track.  
20. STATION PRESET BUTTON (30 STATION PRESET BUTTON)  
The PRESET BUTTONS on the unit are used to store station frequencies which you may wish to recall. Each preset button can  
store FM1, FM2, FM3, MW1, MW2 station frequency. Pressing the button momentarily recalls the station frequency which was  
memorized. There are 6 preset buttons, giving you capability of storing 18FM/12MW.  
NOTE: When the preset button to be memorized is kept pressed for more than 2 seconds, the receiving station  
frequency will be stored in the button pressed. After this, the memorized station can be recalled by pressing the  
button once.  
On CD Mode  
Preset knob 1, press this button to play the first track of the disc  
Preset knob 2, press this button to repeat the specific track of the disc.  
Preset Knob 3, press this button to scan the first 10 seconds of all the tracks on the currently selected disc. "INT" will indicate  
on LCD display.  
Preset knob 4, press this button to play the disc at random order.  
Page. 3  
P / N : 570-931612-03  
WIRE CONNECTION  
RESET FUNCTION  
The RESET button is located on the front  
of main panel. It is recessed in order to  
prevent accidental engagement, and can  
be activated with the tip of a ball-point  
pen or any similar pointed object. This  
reset circuitry is provided in order to  
protect the unit's microprocessor, and  
should only be activated under the  
following conditions :  
a) Initial installation after all wiring is  
completed.  
b) Abnormal operation is encountered  
such as numerical indication on display  
is erratic.  
CAUTION : DO NOT GROUND ANY SPEAKER  
WIRES TO CHASSIS (-).  
c) Whenever the reset button is  
activated, all preset memory content will  
be erased and must be reprogrammed.  
INSTALLATION  
WARNING!!  
Due to protection of CD Mechanism,  
two small screws on the top of the unit  
must be released before operate the  
unit. Otherwise, the CD Mechanism  
can not be working properly.  
UNIT REMOVAL  
1. Remove Front Control Panel.  
2. Slightly insert the key into the slot and  
gently to release.  
3. Separate the sleeve from the unit. Keep  
release key in a safe place as you may  
need for future removal of unit.  
P / N : 570-931612-03  
Page. 4  
P / N : 570-931612-03  

Yamaha CRX 330 User Manual
Yamaha CDC 95 User Manual
Seagate ST68022CF User Manual
Seagate MEDALIST ST33220A User Manual
Seagate Constellation ST2000NM0001 User Manual
RCA RP 3721 User Manual
Pioneer DEH P7100R User Manual
Philips Se6 User Manual
Pantech GB300 User Manual
Nokia 7370 User Manual