Oregon Scientific RRM968P User Manual

Other favourable features include EL back-light, indoor temperature  
display, hourly-chime function, and user-selectable daily beep alarm  
with 8-minute snooze function or Wake-up-to-Radio Alarm.  
RADIO-CONTROLLED PROJECTION  
CLOCK WITH DIGITAL TUNING  
AM/FM RADIO  
MODEL NO.: RRM968P/RRM968PU  
KEY CONFIGURATION & FEATURES  
INSTRUCTION MANUAL  
FRONT VIEW  
INTRODUCTION  
Congratulations on your purchasing the Radio-controlled projection  
Clock with digital tuning AM/FM radio RRM968P/RRM968PU.  
The unit is a multi-functional radio-controlled clock. The RRM968P  
- the Central Europe model - is designed to automatically synchronize  
its current time and date when brought within an approximate  
1500km radius of the radio signal generated from Frankfurt,  
Germany (DCF77). The RRM968PU - the UK model - will do the  
same when brought within range of the radio signal MSF-60  
generated from Rugby, England.  
This unit featured with a projection function that allows the user to  
display either (1) the Current Time with Indoor Temperature or (2)  
the pre-set Alarm time with Indoor Temperature on the ceiling, wall  
or other flat surface. In addition, theAlarm status will also be projected,  
which is indicated by the Alarm-on icon. The image projected is in a  
deep red color which is easily seen in the dark.  
This unit also comes with an digital tuning PLL (Phase Lock Loop)  
AM/FM radio with 16 user-preset stations (8 for AM and 8 for FM  
radio). A Radio Sleep-Timer (auto-off) function is also included.  
A1. 3-Line LCD Display  
- Displays the time, date, indoor temperature and radio function  
1
RRM968PM_EN_R0  
1
7/7/04, 11:01 AM  
SIDE VIEW  
PROJECTION UNIT  
D1. [180º ROTATION] BUTTON  
- Press to flip the projected image horizontally  
D2. [FOCUS] KNOB  
C1. [ALARM ON/OFF] BUTTON  
- Press to turn on/off the alarm function  
C2. [ALARM] BUTTON  
- Rotate to adjust the focus of projection  
D3. [IMAGE ROTATION] KNOB  
- Rotate to change the image 90º to the left or right  
- Press to display the alarm function  
- Press and hold for 2 seconds to enter the alarm-time setting mode  
C3. [PROJECTION ON  
] BUTTON  
- Slide to enable/disable continuous projection  
(when Adapter is connected)  
C4. HEADPHONE JACK  
3
RRM968PM_EN_R0  
3
7/7/04, 11:01 AM  
BACK VIEW  
BATTERY INSTALLATION  
This unit can be operated by batteries or AC power alone as well as  
both together.  
Using Battery  
E1. BATTERY COMPARTMENT  
- Accommodates 4 pieces of UM-3 or AA 1.5 V batteries (2  
pieces for clock function and 2 pieces for radio function)  
E2. EXTENDABLE ANTENNA  
- External antenna for FM radio  
E3. [RESET] BUTTON  
- Press to return all settings to default values  
E4. 4.5 V DC JACK WITH RUBBER COVER  
- For AC power adapter installation  
4
RRM968PM_EN_R0  
4
7/7/04, 11:01 AM  
Battery Installation:  
FEATURES  
1. Remove the battery compartment door by rotating it to the  
direction of “  
” as shown  
Section I — Radio-Controlled Calendar  
Clock  
2. Insert four pieces of UM-3 or AA 1.5V batteries in accordance  
to the polarities.  
3. Press [RESET].  
ABOUT RADIO RECEPTION  
4. Replace the battery compartment door by rotating it back onto  
After battery installation, the unit will automatically synchronize  
its time and date with the radio signal when it is within reception  
range of the signal.  
the unit by following the direction of “  
When the battery power level is low, the respective low battery  
indicator [ ] will light up. Replace the batteries or connect it  
”.  
When the unit is receiving radio signal, the reception icon will start  
to blink. The reception icon will show either strong or weak reception  
depending on the strength of the radio signal. A complete reception  
generally takes about two to ten minutes.  
with AC power adapter.  
Please note if onlyAC adapter is connected and no battery is installed,  
low battery indicator [  
] for clock will also light up.  
When the reception is complete the reception icon will stop blinking. The  
reception icon will show as “ ”for no reception or “  
” for successful  
Using AC Power  
reception.  
The antenna icon indicates the quality of reception.  
STRONG  
WEAK  
NO RECEPTION  
IN PROGRESS  
5
RRM968PM_EN_R0  
5
7/7/04, 11:01 AM  
For best reception, place the unit away from other equipment that emit  
radio frequency or microwave signals such as TVs, radios, PCs or  
microwave ovens. Other causes for signal interference include electrical  
power transmission tower and/or steel reinforced concrete construction.  
3. Clock with Weekday  
----------------------------------------------------------  
-
Clock (2nd Zone-time)/Indoor Temperature  
HOW TO ENABLE OR DISABLE AUTO-  
RECEPTION  
4. Clock with Weekday(2nd Zone-time)  
----------------------------------------------------------  
Calendar (2nd Zone-time)/Indoor Temperature  
To disable the automatic reception of radio signal, press and hold  
[VOL -] for 2 seconds. The reception icon will disappear and the  
unit will stop receiving the radio signal.  
SETTING THE CLOCK AND  
CALENDAR MANUALLY  
To activate the signal reception again, press and hold [VOL +] for 2  
seconds. The reception icon will appear again and start blinking to  
indicate auto reception of radio signal.  
When the automatic radio reception is disabled, the main unit can  
be set manually. Set the Clock and Calendar by following the  
procedures below:  
DISPLAY MODES SELECTION  
1. Press and hold [MODE] for 2 seconds. The 2nd Zone-time hour  
offset will start flashing.  
Press [MODE] in the normal display mode to scroll through the  
calendar clock display modes:  
2. Enter the hour-offset by using [VOL +] or [VOL -]. Press  
[MODE] to confirm the entry.  
1. Clock with Second  
---------------------------  
3. Follow the same procedures to set the 12/24-format, hour, minutes,  
year, “mm:dd” or “dd:mm” calendar display format, month, day,  
display languages and hourly chime on/off mode.  
Calendar/Indoor Temperature  
4. Press [MODE] to save the changes and exit the setting mode. If  
changes are made after the minute adjustment, the value of  
seconds will be reset and start from zero.  
2. Clock with Weekday  
---------------------------------------------  
Calendar/Indoor Temperature  
5. For the day-of-week you can select among 5 languages —English  
6
RRM968PM_EN_R0  
6
7/7/04, 11:01 AM  
(E), French (F), German (D), Italian (I) and Spanish (S).  
Language  
Langues  
Sprache  
Lingue  
Day-of-the-week  
Giorno della settimana Día de la semana  
Affichage du jour  
Wochentaganzeige  
Dia de Semana  
Monday Tuesday Wednesday Thursday Friday Saturday Sunday  
Lundi Mardi Mercredi Jeudi Vendredi Samedi Dimanche  
Montag Dienstag Mittwoch Donnerstag Freitag Samstag Sonntag  
Lunedí Martedí Mercoledí Glovedí  
Lunes Martes Miércoles Jueves  
Segunda Terça Quarta Quinta  
DISPLAYING AND SETTING THE  
ALARM  
Venerdí Sabato Domenica  
Viernes Sábado Domingo  
Sexta  
Idiomas  
Lingua  
This unit is equipped with a daily alarm. To view the preset alarm  
Sábado Domingo  
time, press [ALARM].  
English  
Anglais  
Englisch  
Inglese  
Inglés  
To set the corresponding alarm time, follow the instructions below:  
1. Press and hold [ALARM] for 2 seconds in alarm display mode.  
The hours will blink.  
Inglês  
French  
2. Enter the hour by using [VOL +] or [VOL -]. Press [ALARM]  
to confirm the entry.  
Français  
Französisch  
Francese  
Francés  
Francês  
3. The Minutes will then blink.  
German  
Allemand  
Deutsch  
Tedesco  
Alemán  
Alemão  
4. Enter the minutes by using [VOL +] or [VOL -]. Press  
[ALARM] to confirm the entry.  
5. The beep alarm [  
] or radio alarm icon [  
] will blink.  
6. Select the alarm-sounding mode by using [VOL +] or [VOL -].  
Italian  
Italian  
In Beep alarm mode, a 2-minute crescendo alarm will be turned  
on when the alarm time is up. In Radio alarm mode, when alarm  
time is up, the radio will be turned on and remained on for 2  
hours unless it is manually deactivated. Press [ALARM] to  
confirm the entry.  
Italienisch  
Italiano  
Italiano  
Italíano  
Spanish  
Espagnol  
Spanisch  
Spagnolo  
Español  
Espanhol  
7. If Radio alarm mode is being chosen, the radio will be  
automatically turned on and the Radio Station Number will flash.  
Select the radio station by using [STATION]. Please note that  
in this Radio Alarm mode, manual tuning cannot be used to set  
the station. Press [ALARM] to confirm the entry.  
8. The Volume will then flash. Again, select the radio volume by  
7
RRM968PM_EN_R0  
7
7/7/04, 11:01 AM  
using [VOL +] or [VOL -]. Press [ALARM] to confirm the  
entry and exit the setting mode. Press [RADIO] to turn off the  
radio.  
each hour. You can activate or deactivate this function by setting  
this in the clock and calendar setting mode (please refer to Section  
“SETTING THE CLOCK AND CALENDAR MANUALLY”).  
When the pre-set time arrives, beep sound / radio will be turned on.  
Press any key to stop the beep sound. The EL backlight and projection  
will also activate for 5 seconds.  
Section II - Digitally-tuned PLL AM/FM  
Radio  
To enable/disable the alarm, press [ALARM ON/OFF ] when the  
main unit is in Alarm display mode  
HOW TO USE THE RADIO  
When [SNOOZE/LIGHT] is pressed to stop the alarm sound (only  
when Beep Alarm mode is selected), the unit will re-alarm again  
after 8 minutes. To disable the snooze function, press [ALARM]  
or [ALARM ON/OFF ] or press and hold [SNOOZE/LIGHT] for  
3 seconds when alarm goes off.  
Before you start - All radio functions can only be operated when  
Radio is powered on.  
To turn on the radio press [RADIO]. The radio will be turned on at  
the last preset radio station and volume.  
Please note that when Radio is on while Beep Alarm goes off at the  
same time, the Radio will be temporarily stopped until the Beep  
Alarm has been turned off.  
To change the radio frequency, press [AM/FM] to select the radio  
band. Then use [+TUNING -] to locate the desired radio frequency.  
Press once and the value will advance by 1 step. Press and hold for  
2 seconds to enter the Radio Channel auto-search function.  
NOTE ON RADIO ALARM  
To change the volume, use [VOL +] or [VOL -] to increase or  
decrease the volume.There are a total of 16 (0-15) - steps.  
When the Radio Alarm is turned on, the Radio will be turned on for  
2 hours. You can intervene by setting the time period for the Sleep  
function by pressing [SLEEP] or simply turn off the radio at any  
time.  
To toggle among the programmed stations, press [STATION].  
To turn off the radio, press [ RADIO ].  
AUTO-SEARCH FUNCTION  
HOURLY CHIME FUNCTION  
The unit is equipped with an Auto-Search function and can  
automatically search for the next clear channel. To activate this  
function, press and hold [+TUNING -] for 2 seconds and  
automatically the value of the frequency will keep increasing or  
When the hourly chime function is on, the indication “  
” will  
be displayed and a beep sound will be given out at the beginning of  
8
RRM968PM_EN_R0  
8
7/7/04, 11:01 AM  
decreasing until a clear channel is found. Once this function is  
activated, you can release and stop pressing the button.  
3. Wait for about 5 seconds and the sleep function will be activated  
automatically.  
HOW TO PROGRAM A PRESET  
STATION  
Section III — Indoor Thermometer  
DISPLAY OF INDOOR TEMPERATURE  
This unit allows you to program up to 8 FM and 8 AM radio stations  
in the memory. To do so:  
Once batteries are installed into the main unit, it will start to detect  
the indoor temperature and the data will be displayed. The  
temperature shown is in degree Celsius (°C). The unit is capable of  
measuring temperature within the -5°C and +50°C range. If the  
temperature goes above or below that, “HHH” or “LLL” will be  
displayed correspondingly.  
1. First press [AM/FM] to select the AM or FM frequency.  
2. Select a station number by pressing [STATION].  
3. Locate the desired radio frequency by using [+TUNING -].  
4. Press and hold [STATION] for 2 seconds to confirm and exit  
the setting mode.  
Section IV — Projection  
HOW TO USE THE SLEEP (AUTO-OFF)  
FUNCTION  
HOW TO USE THE PROJECTION  
The projection makes it easier for you to read the current time or  
alarm time with alarm status and indoor temperature at night. To  
use the feature,  
With this Sleep function, the radio will be automatically switched  
off after a pre-set period of time.  
1. To set the sleep function, press [SLEEP]. “0 min” will be  
displayed.  
1. Press [SNOOZE/LIGHT] to turn on the projection for 5  
seconds. The current time with alarm status and indoor  
temperature will be projected onto the surface the lens is facing.  
2. Press [SLEEP] again to select the period of time (120, 90, 60,  
30 or 15 minutes)(when the function is activated the “Sleep”  
icon will flash).  
9
RRM968PM_EN_R0  
9
7/7/04, 11:01 AM  
2. To change to view the preset alarm time instead of the current  
slide the [ PROJECTION ON  
] switch to the “off” position  
time, press [SNOOZE/LIGHT] again when projection is on.  
during daytime.  
Projector Features  
3
Feature  
Effect  
Instructions  
Section V — Others  
Adjustable  
Projection  
Rotates the  
projection 180°  
Tilt swivel projection  
housing to alter the  
direction of projection  
BACKLIGHT  
To turn on the EL backlight of the LCD Display, press [SNOOZE/  
LIGHT] to turn it on for 5 seconds.  
Focuses  
projection  
Rotate Dial D2 to focus  
projection  
FOCUS  
Knob  
IMAGE  
ROTATION projection  
KNOB  
Dial D3 rotates  
Rotation of projection  
allows user to place  
clock in convenient  
HOW TO RESET THE UNIT  
Press [RESET] to reset the settings when the unit is malfunctioning  
When [RESET] is pressed, all settings will return to the default  
values and memory records will be erased.  
180°  
Button D1  
ROTATION horizontally flips  
Flips an image to  
maintain an upright  
position  
BUTTON  
the projection  
180°  
PRECAUTIONS  
This unit is engineered to give you years of satisfactory service if  
you handle it carefully. Here are a few precautions.  
For continuous projection, you must connect it with power adapter.  
When the power adapter is connected to the unit, the projection  
will be activated and remain so by sliding on the [PROJECTION  
1. Do not immerse the unit in water. If you spill liquid over it, dry  
it immediately with a soft, lint-free cloth.  
ON  
] switch.  
2. Do not clean the unit with any liquid containing alcohol,  
detergent, abrasive or corrosive materials. They may scratch the  
plastic parts and corrode the electronic circuit.  
To deactivate the feature, slide the switch back to its off position.  
To increase the life-time of the projection LED, it is suggested to  
3. Do not subject the unit to excessive force, shock, dust,  
temperature or humidity, which may result in malfunction,  
shorter electronic life span, damaged battery and distorted parts.  
10  
RRM968PM_EN_R0  
10  
7/7/04, 11:01 AM  
4. Do not tamper with the unit’s internal components. Doing so will  
invalidate the warranty on the unit and may cause unnecessary damage.  
The unit contains no user-serviceable parts.  
(i) Crescendo Beep Alarm with  
8-minute Snooze function; or  
(ii) Radio Alarm  
5. Only use fresh batteries as specified in the user’s instructions.  
Do not mix new and old batteries as the old ones may leak.  
Digital - tuning Radio  
AM band Frequency  
:
:
:
:
531 – 1602 kHz  
(Step frequency: 9KHz)  
6. Always read the user’s instructions thoroughly before operating  
the unit.  
FM band Frequency  
Station  
87.5 – 108.0 MHz  
(Step frequency: 0.05MHz)  
To maintain good performances, do not use the units in places which  
are extremely hot, cold, dusty or humid. In particular, keep the  
units away from:  
8 memories for AM/ 8 memories  
for FM  
-
-
-
High Humidity areas (e.g., bathroom)  
Extreme hot areas (e.g., near a heater)  
Areas exposed to direct sunlight  
Digital Volume  
16 - step (0-15)  
Temperature Measurement  
Main Unit  
Note on Listening with the headphones  
Indoor Temperature  
Measuring Range  
Temperature Resolution  
Power  
A headphone jack is provided so that you can listen to the radio by  
plugging a headphone into the jack. Remember to listen at a  
moderate volume to avoid hearing damage.  
:
:
:
-5°C to +50°C (+23°F to +122°F)  
0.1°C (0.2°F)  
- 4 pcs of AA or “UM-3”  
1.5 V batteries  
SPECIFICATIONS  
- 4.5 V AC Adapter  
(for continuous projection)  
Radio-controlled Calendar Clock  
Display format  
Calendar  
:
:
12- or 24-hour  
Weight  
:
:
:
379g (without battery)  
Month/Day/Second or Month/  
Day/Day - of - Week  
Dimensions  
Note on Battery  
153 x 126 x 40mm ( L x W x H )  
Batteries included (if any) are for  
demonstration purpose only. For  
optimal daily-usage, application  
of new alkaline batteries are  
recommended.  
Day of Week in 5 languages:  
English/ French/ German/ Italian  
and Spanish  
Alarm  
:
Daily alarm in the following modes:  
11  
RRM968PM_EN_R0  
11  
7/7/04, 11:01 AM  
Additional information:  
ABOUT OREGON SCIENTIFIC  
The product herewith complies with the requirements of the Low  
Voltage Directive 73 / 23 / EC, the EMC Directive 89 / 336 / EC and  
carries the CE marking accordingly.  
Oregon Scientific products such as digital cameras; MP3 players;  
children's electronic learning products and games; projection clocks;  
health and fitness gear; weather stations; and digital and conference  
phones. The website also includes contact information for our cus-  
tomer care department in case you need to reach us, as well as fre-  
quently asked questions and customer downloads.  
We hope you will find all the information you need on our website,  
however if you'd like to contact the Oregon Scientific Customer  
Care department directly, please visit www2.oregonscientific.com/  
service/support or call 949-608-2848 in the US. For international  
enquiries, please visit www2.oregonscientific.com/about/interna-  
tional/default.asp.  
Carmelo Cubito  
Agrate Brianza (MI) / Italy January 2004  
EC Mandatory of Manufacturer  
EC-DECLARATION OF CONFORMITY  
This product complies with the essential requirements of Article 3  
of the R&TTE 1999 / 5 / EC Directive, if used as intended and the  
following standards have been applied:  
COUNTRIES RTTE APPROVAL COMPLIED  
Safety of information technology equipment  
CH  
N
All EC countries, Switzerland  
and Norway  
(Article 3.1.a of the R&TTE Directive)  
Applied Standard  
EN 60950: 2000  
Electromagnetic compatibility  
(Article 3.1.b of the R&TTE Directive)  
Applied Standards  
EN 301 489-3: 2002  
12  
RRM968PM_EN_R0  
12  
7/7/04, 11:01 AM  
TROUBLESHOOTING GUIDE - RRM968P/ RRM968PU  
Trouble  
Reception icon “Antenna” is not shown  
Possible Cause  
Remedy  
Auto-reception of clock radio signal has been  
disabled  
Enable this function by following the  
instructions in the User’s Manual  
Displayed Temperature data is different from other (1) The measurement method is different  
(1) Use the same instruments with  
consideration of the tolerance of readings  
measuring instruments  
(2) The area under evaluation is different or being  
influenced by climate  
(1) Place the 2 instruments very closely for a  
time period (no less then 30 minutes),  
avoiding direct light and air movements  
-
Locate the Main Unit far from PC, mobile phone  
etc and re-locate it near the window sill. Wait at  
least 24 hours (note: during night-time signal is  
less attenuate particularly after raining)  
The clock radio signal is not received because:  
-
-
Clock time is not correctly set; and/or  
-
Electromagnetic interference exist, or the Main  
Unit is located within reinforced concrete wall or  
shadowed area location  
Reception icon “Antenna” displays as “No  
reception”  
-
-
The clock radio signal is searched at 1:00,  
2:00, 3:00, 9:00, 15:00, 21:00 every day  
automatically  
-
Orientation of placement is not at optimum  
position for reception of clock radio signal  
To force the signal reception please refer to  
instructions in the User’s manual  
The projection LED does not go on when AC/DC Projection-On button is slid to the Off-position  
adapter is installed  
Slide the Projection-On button to the On-  
position  
The unit is reset when SNOOZE button is pressed Batteries are being discharged  
Replace with new batteries  
Warning:  
-
-
For other cases not listed in the above, feel free to contact our help line  
Do not dissemble the unit. This will void the warranty  
13  
RRM968PM_EN_R0  
13  
7/7/04, 11:01 AM  

Toshiba MK4026GAX (HDD2193) User Manual
Seagate ST903204EXM101 RK User Manual
Seagate ST9100AG User Manual
Seagate Pulsar2 ST400FM0002 User Manual
Seagate EE252 SERIES ST980818SM User Manual
Samsung SPH M330 User Manual
Samsung GT S5230 User Manual
Philips CTM600BLU User Manual
ooma Scout User Manual
Nokia CDMA 6088 User Manual