Oregon Scientific RRM326P User Manual

Projection Unit ......................................................... 7  
Reset the Clock ........................................................ 8  
Warnings ................................................................... 8  
Troubleshooting ....................................................... 9  
Technical Specifications ......................................... 9  
Notices .................................................................... 10  
Statement of Responsibility ................................ 10  
About Oregon Scientific ........................................ 10  
EC-Declaration of Conformity ............................... 10  
Dual-Band RF  
Projection Clock with FM Radio  
Model: RRM326P  
USER MANUAL  
CONTENTS  
Introduction .............................................................. 2  
Product Overview .................................................... 2  
Front View ............................................................ 2  
Back View............................................................. 3  
LCD Display ......................................................... 3  
Getting Started ......................................................... 4  
Batteries ............................................................... 4  
AC Adaptor ........................................................... 4  
About RF Reception................................................. 4  
Turn the Radio Reception ON / OFF .................... 5  
Clock / Calendar ....................................................... 5  
Clock / Calendar Display ...................................... 5  
Set Clock / Calendar ............................................ 5  
FM Radio ................................................................... 6  
Operating the Radio ............................................. 6  
Radio Stations ...................................................... 6  
Sleep .................................................................... 6  
Backlight ................................................................... 6  
Alarm ......................................................................... 7  
Alarm Display and Sound ..................................... 7  
Set the Alarm(s) ................................................... 7  
Activate / Deactivate the Alarm(s) ........................ 7  
Snooze / Turning the Alarm OFF .......................... 7  
1
RRM326P_EN_output  
1
03/09/2005, 14:44  
7. PROJECTION ON: Slide to ON for continuous  
image projection when the AC power is connected  
8. ALARM ON / OFF: Switch alarm on or off  
9. ALARM:Togglebetweenalarmandcalendardisplay  
10. STATION: Toggle through preset radio stations  
11. MODE:Togglebetweensettingmodes/confirmsettings  
12. Battery Compartment (cover on): 2 x UM-3 / AA  
1.5V batteries  
BACK VIEW  
LCD DISPLAY  
1. Time  
2. Alarm on / off  
3. Radio alarm on / off  
4. Alarm time  
5. RF clock reception  
6. Battery status  
7. Offset time zone  
8. AC adaptor is disconnected  
9. FM radio display / sleep / volume level  
1. FOCUS: Turn to focus the projected image  
2. Image Rotation: Twist to rotate the image display  
between the vertical and horizontal  
3. 4.5V AC / DC Adaptor Socket  
4. FM Radio Antenna Wire  
5. RESET:Presstoreturnallvaluestothedefaultsettings  
6. EU / UK: Select nearest radio signal base i.e.  
England or Germany  
3
RRM326P_EN_output  
3
03/09/2005, 14:44  
AC ADAPTOR  
GETTING STARTED  
BATTERIES  
The batteries serve as a back-up power supply. For  
continuous use of the projector, install theAC adaptor at  
the base of the unit as shown below.  
Batteries are supplied with this product:  
2 x UM-3 / AA 1.5V batteries  
NOTE Itisrecommendedthatyouusealkalinebatteries  
with this product for longer performance.  
Insert batteries before first use, matching the polarity  
(+ and -) as shown below. Press RESET after each  
battery change.  
NOTE To helpconserveenergy,turnthePROJECTION  
ON switch to OFF when you do not wish to use it.  
ABOUT RF RECEPTION  
This clock can automatically synchronize the date and  
time with official time-keeping organizations in Frankfurt  
(Germany) and Rugby (England). The unit can pick up a  
Radio Frequency (RF) signal when it is within 1500km  
(932 miles) of these locations.  
NOTE Do not use rechargeable batteries with this  
product.  
BATTERY ICON  
MEANING  
Batteries are low, or there are no  
batteries installed and only the  
adaptor is connected  
4
RRM326P_EN_output  
4
03/09/2005, 14:44  
To select the most suitable radio signal for your location,  
slide the UK / EU switch to the appropriate setting. Press  
RESET whenever you change the selected setting.  
CLOCK / CALENDAR  
CLOCK / CALENDAR DISPLAY  
Press MODE to toggle between 3 types of display  
(Clock with seconds, Clock with day, Clock with time  
zone offset).  
NOTE For best results, place the clock away from  
metal or electrical objects, and near a window with a  
clear view to the sky.  
TURN THE RADIO RECEPTION ON / OFF  
To turn the radio reception ON:  
Press VOL  
and hold for 2 seconds.  
The RF reception icon will appear and flash on the  
display to indicate it is searching for the RF signal.  
SET CLOCK / CALENDAR  
1. Press and hold MODE for 2 seconds. The time zone  
offset hour digits will flash. When an offset hour has  
been set (e.g. +1), the time displayed will be the RF  
clock time plus 1 hour.  
Oncebatterieshavebeeninstalledintheclock,thereception  
icon will flash to indicate it is searching for a signal.  
Whenthereceptionsignalhasbeenreceivedthereception  
icon will show the signal strength by displaying between  
0 and 3 waves:  
STRONG SIGNAL WEAK SIGNAL  
NO SIGNAL  
To turn the radio reception OFF:  
Press and hold VOL  
TheRFreceptioniconwilldisappearfromthedisplay.  
for 2 seconds.  
5
RRM326P_EN_output  
5
03/09/2005, 14:44  
2. Press VOL  
or  
to change the setting.  
3. Press TUNING  
or  
to change radio frequency,  
3. Press MODE to confirm the setting and move onto  
the next one.  
press and hold for 2 seconds to enable auto-search  
for an available frequency.  
4. Thesettingsappearinthefollowingorder:Timezone  
hour offset, 12 / 24 hour format, hour, minute, year,  
MM / DD or DD / MM format, month, day and  
language for day of the week.  
4. Press any key to stop auto-search.  
RADIO STATIONS  
To set a radio station, press and hold STATION while on  
a frequency. The unit can store up to 8 preset stations in  
chronological order.  
5. PressALARM,ALARMON/OFF,TUNING or  
,
SLEEP, or RADIO to exit the Clock Setting Mode.  
Press STATION to return to the last station that you  
listenedto. UsetheSTATIONbuttontoscrollthroughthe  
8 preset stations.  
FM RADIO  
Thisproducthasabuilt-inFMradioforyourentertainment.  
In order to conserve power, the FM radio only works  
when the AC adaptor is plugged in.  
SLEEP  
The radio is equipped with a countdown sleep timer that  
can be set to switch the radio off after up to 120 minutes.  
OPERATING THE RADIO  
1. Press RADIO to switch the radio on.  
1. Press SLEEP to enter sleep mode.  
2. Use the SLEEP button to change the sleep time  
setting (120, 90, 60, 45, 30, 15, 0).  
3. Press any key to exit sleep mode – the sleep timer  
will be automatically activated.  
BACKLIGHT  
Press SNOOZE / LIGHT to activate the backlight for 5  
seconds.  
2. Press VOL  
or  
to change the radio volume.  
6
RRM326P_EN_output  
6
03/09/2005, 14:44  
6. Press ALARM to exit alarm setting mode.  
7. The daily alarm will be on automatically after setting.  
ALARM  
ALARM DISPLAY AND SOUND  
This product has two types of daily alarm that can be set  
to go off at the same time every day. You can choose to  
be woken up by the radio or by a buzzer alarm. Press  
ALARM at any time to toggle between the calendar and  
the alarm display.  
ACTIVATE / DEACTIVATE THE ALARM(S)  
Press the ALARM ON / OFF to enable or disable the  
daily alarm.  
Whenthebuzzeralarm/radioalarmiconappearson  
the display the alarm is activated. When the icons do  
notappearthebuzzeralarm/radioalarmisdeactivated.  
NOTE If the radio alarm time is reached when the AC  
adaptorisnotconnectedtheunitwilldefaultto buzzeralarm.  
SNOOZE / TURNING THE ALARM OFF  
When activated, the alarm icon flashes, the backlight  
and projector turn on for 8 seconds. The buzzer alarm  
sounds for 2 minutes if no key is pressed. The radio will  
remain on for 120 minutes if no key is pressed.  
SET THE ALARM(S)  
1. Press and hold ALARM for 2 seconds.  
2. Use VOL  
or  
to change the flashing setting.  
To silence the alarm:  
Press SNOOZE / LIGHT to silence it for 8 minutes.  
The buzzer alarm or radio alarm icon will flash to  
show snooze is enabled.  
OR  
Press any key except SNOOZE / LIGHT to mute the  
alarm and activate it again in 24 hours.  
3. Press ALARM to confirm the setting and move onto  
the next one.  
4. The settings appear in the following order: Hour,  
minute, alarm type (i.e. radio alarm or buzzer alarm).  
5. If radio alarm is selected, preset station and preset  
volume can also be altered.  
PROJECTION UNIT  
The projection unit can display both time and alarm  
status. To use this feature:  
7
RRM326P_EN_output  
7
03/09/2005, 14:44  
Slide the PROJECTION switch ON to activate  
continuous projection. However, this function will not  
work unless the AC / DC adaptor is used.  
Adjust the FOCUS knob to make the image clearer.  
Manually tilt the projection unit to position the image.  
WARNINGS  
This product is designed to give you years of service if  
handledproperly.OregonScientificwillnotberesponsible  
for any deviations in the usage of the device from those  
specified in the user instructions or any unapproved  
alterationsorrepairsoftheproduct.Observethefollowing  
guidelines:  
NOTE YoucanalsopresstheSNOOZE/LIGHTbutton  
to project the time and alarm status for 5 seconds.  
Do not clean any part of the product with benzene,  
thinner or other solvent chemicals – this may cause  
permanentdamagethatisnotcoveredbytheguarantee.  
When necessary, clean it with a damp cloth.  
Never immerse the product in water. This can cause  
electrical shock and damage the product.  
Do not subject the product to extreme force, shock,  
or fluctuations in temperature or humidity.  
Do not tamper with the internal components.  
Do not mix new and old batteries or batteries of  
different types.  
RESET THE CLOCK  
Insert a thin blunt instrument into the hole below RESET  
to return to the default settings.  
The default settings are:  
EU Clock Time:  
UK Clock Time:  
Date:  
12.00  
12:00 pm  
1st January 2005  
English  
+0  
6.00 AM  
Language:  
Time Offset:  
Alarm Time:  
Do not use rechargeable batteries with this product.  
Remove the batteries if storing this product for a long  
period of time.  
Daily Alarm(s):  
EU Display Setting:  
UK Display Setting:  
Disabled  
24hr, DD / MM  
12hr, DD / MM  
Do not scratch the LCD display.  
NOTE The technical specification of this product and  
contents of this user manual are subject to change  
without notice. Images not drawn to scale.  
8
RRM326P_EN_output  
8
03/09/2005, 14:44  
TROUBLESHOOTING  
TECHNICAL SPECIFICATIONS  
PROBLEM  
SYMPTOM  
REMEDY  
TYPE  
DESCRIPTION  
Clock time is  
not correctly set reception  
No radio signal Place the clock far  
Main Unit Dimensions  
L x W x H  
away from PCs,  
phones, and other  
electronicequipment  
andnearawindowsill.  
Waitforatleast24  
hours  
161 x 30 x 103 mm  
(6.34 x 1.18 x 4.06 inches)  
Weight (without battery) 235 g (0.52 lbs)  
Main Unit RF  
RF Clock Frequency  
System  
DCF77 (EU) or MSF60 (UK)  
No alarm  
Alarm does not Turnonthe setting  
sound  
Synchronization  
FM Band Range  
Main Unit Display  
Clock  
Auto or disabled  
87.5-108.0 MHz  
Operation  
not normal  
Certain functions Reset the clock  
do not perform  
HH:MM:SS  
HH:MM: Day of week  
HH:MM:Timezonehouroffset  
Calendar  
Strange day  
Check it is set to  
yourownlanguage  
Clock  
Cannot change Disable the radio  
Hour Format  
Calendar  
12hr AM / PM (MSF Format)  
24hr (DCF Format)  
clock  
signal and set  
manually  
DD / MM or MM / DD, user  
selectable. Weekdaylanguage:  
E, D, F, I, S.  
Clock / Calendar Cannot auto-  
synchronize  
1.Adjustbatteries  
2. Press RESET  
the clock  
Alarm  
2-minute alarm  
8-minute snooze  
Power  
Main Unit  
2 x UM-3 / AA 1.5V batteries  
or 4.5V AC / DC adaptor  
9
RRM326P_EN_output  
9
03/09/2005, 14:44  
We hope you will find all the information you need on our  
website, however if you’re in the US and would like to  
contacttheOregonScientificCustomerCaredepartment  
directly,pleasevisit:www2.oregonscientific.com/service/  
support  
NOTE Itisrecommendedthatyouusealkalinebatteries  
with this product for longer performance.  
NOTE Designandspecificationsaresubjecttochange  
without notice.  
OR  
NOTICES  
Call 949-608-2848.  
STATEMENT OF RESPONSIBILITY  
Oregon Scientific will not be held liable for any bodily  
injury, death, property damages, or any other claims of  
whatevernatureresultingfromthemisuseornegligence  
of the product, whether intentional or unintentional.  
For international enquiries, please visit:  
www2.oregonscientific.com/about/international/  
default.asp  
OregonScientificwillnotberesponsibleforanydeviations  
intheusageofthedevicefromthosespecifiedintheuser  
instructions or any unapproved alternations or repairs of  
the product.  
EC-DECLARATION OF CONFORMITY  
Hereby,OregonScientific,declaresthatthisDual-Band  
RF Projection Clock with FM Radio RRM326P is in  
compliance with the essential requirements and other  
relevant provisions of Directive 1999/5/EC.  
ABOUT OREGON SCIENTIFIC  
AcopyofthesignedanddatedDeclarationofConformity  
isavailableonrequestviaourOregonScientificCustomer  
Service.  
more about Oregon Scientific products such as digital  
cameras;MP3players;children’selectroniclearningproducts  
and games; projection clocks; health and fitness gear;  
weatherstations;anddigitalandconferencephones.The  
websitealsoincludescontactinformationforourcustomer  
care department in case you need to reach us, as well as  
frequently asked questions and customer downloads.  
COUNTRIES RTTE APPROVAL COMPLIED  
All EC countries, Switzerland CH  
and Norway  
N
10  
RRM326P_EN_output  
10  
03/09/2005, 14:44  
Dual-Band RF Projection Clock with FM Radio  
Model: RRM326P  
USER MANUAL  
RRM326P_EN_output  
11  
03/09/2005, 14:44  
© 2005 Oregon Scientific. All rights reserved.  
086-003827-010  
RRM326P_EN_output  
12  
03/09/2005, 14:44  

Tripp Lite NC2004EC User Manual
Teac X 01 User Manual
Sony USM512U2 User Manual
Sanyo SCP 3100 User Manual
Samsung SGH C200 User Manual
Samsung SCH R930 User Manual
Samsung GT S5360MAADBT User Manual
Philips CTS660BLK User Manual
Nokia 6650 User Manual
Nokia 6360 User Manual