Oregon Scientific RMR602A User Manual

Wireless Thermo Clock  
Model : RMR602A  
User Manual  
RMR602A lab test cover R1  
1
1/8/04, 6:51 PM  
INTRODUCTION  
ABOUT OREGON SCIENTIFIC  
Thank you for selecting the Oregon ScientificTM Wireless  
Thermo Clock (RMR602A). This device bundles precise  
time keeping, alarm, and temperature monitoring  
features into a single tool you can use from the  
convenience of your home.  
more about other Oregon Scientific products such as  
digital cameras, hand-held organizers, health and fitness  
gear, and projection clocks. The website also includes  
contact information for our customer service department,  
in case you need to reach us.  
In this box, you will find:  
Main unit  
Remote sensor  
Keep this manual handy as you use your new product.  
It contains practical step-by-step instructions, as well  
as technical specifications and warnings you should  
know.  
2
RMR602A lab test R2  
2
1/17/04, 4:49 PM  
PRODUCT OVERVIEW  
FRONT VIEW  
1
1. Outdoor Temperature Area: Readings, sensor  
battery and reception status  
2. Indoor Temperature Area: Readings and main  
4
5
unit battery status.  
3. Clock / Alarm Area: Time, day of week, month,  
date, alarm  
4.  
5.  
6
: Press to increase setting or enableAtomic Clock  
signal reception / alarm  
2
3
6
7
MODE  
MEM  
: Press to decrease setting or disableAtomic Clock  
signal reception / alarm  
MODE: Press to change display / settings  
7. MEM: Press to view current or saved max / min  
8
temperature readings  
8. ((.)): Press to view alarm settings  
3
RMR602A lab test R2  
3
1/17/04, 4:49 PM  
BACK VIEW  
BACK VIEW  
1. Wall mount  
2. Battery compartment  
3. °C / °F switch  
1
2
MODEL NO. RMR602A  
4. RESET hole  
5. SEARCH button  
6. Table stand  
"AAA" UM4 1.5V  
"AAA" UM4 1.5V  
REMOTE SENSOR (THGR122N)  
3
4
GETTING STARTED  
C/ F SEARCHRESET  
5
6
4
RMR602A lab test R2  
4
1/17/04, 4:49 PM  
REMOTE SENSOR  
1
1
2, 3  
1. Wall mount hole  
1. LED Status indicator  
2. Battery compartment  
3. Battery compartment cover  
5
RMR602A lab test R2  
5
1/17/04, 4:49 PM  
CHANGE SETTINGS  
GETTING STARTED  
BATTERIES  
1. Press and hold MODE for 2 seconds to enter setting  
mode.  
Batteries are not supplied with this product. You will need  
to purchase 2 x UM-4 (AAA) 1.5V alkaline batteries for  
the main unit, and 2 x UM-3 (AA) 1.5V alkaline batteries  
for the remote sensor.  
2. Press UP or DOWN to change settings.  
3. Press MODE to confirm.  
TABLE STAND OR WALL MOUNT  
Use the stand on the back of the product, or mount it on  
a wall with a nail.  
Insert batteries before first use, matching the polarity as  
shown in the battery compartment. For best results,  
install batteries in the remote sensor before the main  
unit. Press RESET after each battery change.  
Do not use rechargeable batteries.  
NOTE  
shows when batteries are low.  
UNIT  
LOCATION  
Main  
Indoor Temperature Area  
OutdoorTemperatureArea.  
Remote  
REMOTE SENSOR  
This product is shipped with a remote sensor that collects  
temperature readings. Only one sensor can be used with  
this product.  
6
RMR602A lab test R2  
6
1/17/04, 4:49 PM  
For best results:  
SETUP SENSOR  
Insert the batteries before you mount the sensor.  
1. Open the remote sensor battery compartment with  
a small Phillips screwdriver.  
Place the sensor out of direct sunlight and  
moisture.  
2. Insert the batteries, matching the polarity as shown  
in the battery compartment.  
Do not place the sensor more than 30 meters  
(98 feet) from the main (indoor) unit.  
3. Place the sensor near the main unit. Press RESET,  
then SEARCH, on the main unit to initiate signal  
sending between the sensor and the main unit. The  
reception icon on the main unit will blink for  
approximately 3 minutes while it is searching for  
the sensor. (Refer to the Sensor Data Transmission  
section for more information.)  
Position the sensor so that it faces the main  
(indoor) unit, minimizing obstructions such as  
doors, walls, and furniture.  
Place the sensor in a location with a clear view  
to the sky, away from metallic or electronic  
objects.  
4. Close the remote sensor battery compartment.  
Position the sensor close to the main unit  
during cold winter months as below-freezing  
temperatures may affect battery performance and  
signal transmission.  
5. Secure the sensor in the desired location using the  
wall mount or table stand.  
You may need to experiment with various locations to  
get the best results.  
7
RMR602A lab test R2  
7
1/17/04, 4:49 PM  
DATA TRANSMISSION  
CLOCK  
Data is sent from the sensor(s) every 78 seconds.  
The reception icon shown in the Outdoor  
Temperature Area shows the status.  
This product has two displays: Clock with day of week  
in German, English, French, Italian, or Spanish, and  
Calendar display with month and date. The time is  
automatically updated by the US Atomic Clock in  
Boulder, Colorado unless you disable this feature.  
Signals are collected by the main unit when it is within  
1500 km (932 miles) of a signal.  
ICON  
DESCRIPTION  
Main unit is searching for  
sensor.  
Sensor signal is steady.  
Initial reception takes 2 - 10 minutes, and is initiated  
when you first setup the unit, and whenever you press  
RESET. Once complete, the reception icon will stop  
blinking. The icon is shown in the Clock Area.  
--- shows  
The sensor cannot be  
found. Search for the  
sensor or check batteries.  
SEARCH FOR SENSOR  
To search for the sensor, press SEARCH . The SEARCH  
button is located in the main unit battery compartment.  
NOTE If the sensor is still not found, check the  
batteries, obstructions, and remote unit location.  
To force a manual search forAtomic Clock signals, press  
and hold UP for 2 seconds. If no signal is found, check  
the batteries.  
NOTE Signals from household devices such as  
doorbells, electronic garage doors, and home security  
systems may cause temporary reception failure. This is  
normal and does not affect general product performance.  
The reception will resume once the interference ends.  
NOTE  
If the Atomic Clock signal is received and the  
hour is incorrect, use the "hour offset" feature to adjust  
it to to the right value. Please see "SET CLOCK" on  
pg. 9 for instructions.  
8
RMR602A lab test R2  
8
1/17/04, 4:49 PM  
TURN ATOMIC CLOCK ON/OFF  
ALARM  
Perform this step if you cannot receive Atomic Clock  
signals. Press and hold DOWN for 2 seconds. Then,  
manually set the clock following the "Set Clock"  
instructions (below).  
This product has 2 alarms: a SingleAlarm and a Weekday  
Alarm. The SingleAlarm can be set to go off at a specific  
time for a one-time event (for example, if you are napping  
on Saturday). The WeekdayAlarm will sound at the same  
time Monday - Friday (but not on weekends).  
The signal icon indicates that the Atomic Clock  
feature is ON. No icon means that it is OFF.  
VIEW ALARM SETTINGS  
Press ((.)) to display the Alarm settings you wish to view:  
Weekday or Single.  
SET CLOCK  
You only need to do this if you have disabled theAtomic  
Clock feature (for example, if you are too far from or  
cannot receive a signal).  
SET ALARM  
1. Press ((.)) to display the type of Alarm you wish to  
set: Weekday or Single.  
1. Press and hold MODE for 2 seconds. The Clock  
2. Press and hold ((.)) again for 2 seconds. TheAlarm  
Area will blink.  
settings will blink.  
2. Select the hour offset (-9 to +9), hour display format  
(12 or 24 hour), hour, minute, year, month, day, and  
language. Press UP or DOWN to change the setting.  
Press MODE to confirm.  
3. Select the hour and minute. Press UP or DOWN to  
change settings. Press ((.)) to confirm.  
ACTIVATE ALARM  
NOTE The language options are (D) German,  
Press  
or  
to activate or deactivate the Alarm. ---  
(E) English, (F) French, (I) Italian, and (S) Spanish.  
indicates that the alarm is deactivated.  
STOP ALARM  
SWITCH CLOCK DISPLAY  
To stop the alarm from ringing, press ((.)).  
Press MODE to toggle between Calendar and Clock  
display with Hour Offset, Seconds, or Weekday.  
9
RMR602A lab test R2  
9
1/17/04, 4:49 PM  
TEMPERATURE  
RESET SYSTEM  
This product can display current, maximum, and  
minimum temperature readings collected by the main  
unit (indoor) and remote sensor (outdoor).  
The RESET button is located in the battery  
compartments for the main unit. Press RESET when  
you change the batteries and whenever performance is  
not behaving as expected (for example, unable to  
establish radio frequency link with remote sensor or  
radio-controlled clock).  
Outdoor temperature data collected by the remote  
sensor is updated every 78 seconds.  
When you press RESET, all settings will return  
to default value, and you will lose all stored information.  
NOTE  
SELECT TEMPERATURE UNIT  
Press the °C / °F button to switch between temperature  
units. The button is located in the battery compartment.  
SAFETY AND CARE  
MINIMUM / MAXIMUM RECORDS  
Press MEM to toggle between current, maximum (MAX)  
and minimum (MIN) records.  
Clean the product with a slightly damp cloth and alcohol  
- free mild detergent. Avoid dropping the product or  
placing it in a high-traffic location.  
To clear the records, press and hold MEM for 2 seconds.  
The current temperature readings will be shown as the  
minimum and maximum records.  
10  
RMR602A lab test R2  
10  
1/17/04, 4:49 PM  
WARNINGS  
TROUBLESHOOTING  
This product is designed to give you years of service if  
handled properly. Observe the following guidelines:  
Check here before contacting our customer service  
department.  
Problem  
Calendar  
Symptom  
Remedy  
Never immerse the product in water. This can  
cause electrical shock and damage the product.  
Change language  
Strange date /  
month  
(
9)  
Do not subject the main unit to extreme force,  
shock, or fluctuations in temperature or humidity.  
Clock  
Cannot adjust Disable Atomic Clock  
clock 9)  
(
Do not tamper with the internal components.  
Cannot auto- 1. Adjust batteries.  
synch 6)  
Do not mix new and old batteries or batteries of  
different types.  
(
2. Press RESET  
10)  
Do not use rechargeable batteries with this  
product.  
(
3. Manually activate  
Atomic Clock  
feature ( 9)  
Remove the batteries if storing this product for a  
long period of time.  
Do not scratch the LCD display.  
Temp  
Shows "LLL" Temperature is out-of-  
or "HHH" range  
Do not make any changes or modifications to this  
product. Unauthorized changes may void your right to  
use the product. The technical specification of this  
product and contents of this user guide are subject to  
change without notice. Images not drawn to scale.  
Remote  
sensor  
Cannot locate Check batteries ( 6)  
remote  
Check location ( 7)  
sensor  
Data does  
not match  
main unit  
Initiate a manual sensor  
search ( 8)  
11  
RMR602A lab test R2  
11  
1/17/04, 4:49 PM  
REMOTE SENSOR  
RF frequency  
Range  
SPECIFICATIONS  
433 MHz  
MAIN UNIT DIMENSIONS  
30 meters (98 feet)  
with no obstructions  
L x W x H  
100 x 47 x 99 mm  
(3.94 x 1.85 x 3.90 inches)  
Transmission  
every 78 seconds  
Weight  
4.80 ounces with battery  
CLOCK  
REMOTE SENSOR DIMENSIONS  
Atomic Clock  
Auto or manual  
(disabled)  
L x W x H  
96 x 50 x 28 mm  
(3.8 x 2.0 x 1.1 inches)  
Clock display  
Hour format  
Hour offset  
Calendar  
HH:MM:SS  
Weight  
1.62 ounce without  
battery  
12hr AM/PM or 24hr  
+/- 9 hours  
MM/DD; weekday in  
TEMPERATURE  
Unit  
5 languages (D, E, F, I, S)  
°C or °F  
-5 °C to 50 °C  
(23 °F to 122 °F)  
Alarm  
Weekday and Single;  
2- minute crescendo  
Indoor Range  
Outdoor Range  
-20 °C to 60 °C  
POWER  
(-4 °F to 140 °F)  
Main unit batteries  
2 x UM-4 (AAA) 1.5V  
alkaline  
Resolution  
Memory  
0.1 °C (0.2° F)  
Min / Max  
Sensor batteries  
2 x UM-3 (AA) 1.5V  
alkaline  
12  
RMR602A lab test R2  
12  
1/17/04, 4:49 PM  
Reorient or relocate the receiving antenna.  
FCC STATEMENT  
Increase the separation between the equipment  
and receiver.  
This device complies with Part 15 of the FCC Rules.  
Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference, and  
(2) This device must accept any interference received,  
including interference that may cause undesired  
operation.  
Connect the equipment into an outlet on a circuit  
different from that to which the receiver is  
connected.  
Consult the dealer or an experienced radio/TV  
technician for help.  
Warning: Changes or modifications to this unit not  
expressly approved by the party responsible for  
compliance could void the user's authority to operate  
the equipment.  
NOTE: This equipment has been tested and found to  
comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits are  
designed to provide reasonable protection against  
harmful interference in a residential installation. This  
equipment generates, uses and can radiate radio  
frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful  
interference to radio communications.  
However, there is no guarantee that interference will not  
occur in a particular installation. If this equipment does  
cause harmful interference to radio or television  
reception, which can be determined by turning the  
equipment off and on, the user is encouraged to try to  
correct the interference by one or more of the following  
measures:  
13  
RMR602A lab test R2  
13  
1/17/04, 4:49 PM  
is in conformity with Part 15 of the FCC Rules. Operation  
is subject to the following two conditions:  
DECLARATION OF CONFORMITY  
The information below is not to be used as contact for  
support or sales. Please call our customer service number  
or on the warranty card for this product) for all inquiries  
instead.  
1) This device may not cause harmful  
interference.  
2) This device must accept any interference  
received, including interference that may  
cause undesired operation.  
We  
Name:  
Oregon Scientific, Inc.  
Address:  
19861 SW 95th Place, Tualatin,  
Oregon 97062 USA  
Telephone No.:  
Fax No.:  
1-800-853-8883  
1-503-684-8883  
declare that the product  
Product No.:  
RMR602A  
Product Name:  
Manufacturer:  
Address:  
Wireless Thermo Clock  
IDT Technology Limited  
Block C, 9/F, Kaiser Estate,  
Phase 1, 41 Man Yue St.,  
Hung Hom, Kowloon,  
Hong Kong  
14  
RMR602A lab test R2  
14  
1/17/04, 4:49 PM  
© 2004 Oregon Scientific. All rights reserved.  
P/N.: 086-003350-010  
RMR602A lab test back cover  
1
12/29/03, 10:23 PM  
Black  

XO Vision Xo Vision Shiner X140VIDB User Manual
Toastmaster ME8TPB ME8TPW ME8TPBS MET8SW ME8TSB ME8TPWCAN User Manual
Sony PEGA UC60K User Manual
Sony Ericsson F305 User Manual
Samsung SPH A840 User Manual
Samsung GH68 17116A User Manual
Profile CD Player CD8200 User Manual
Philips KONINKLIJKE AZ5740 User Manual
Philips GoGear SA2526 User Manual
Parrot Cell Phone X600 User Manual