Oregon Scientific RM962A User Manual

DESCRIPTION OF PARTS  
RADIO CONTROLLED CLOCK  
WITH INDOOR THERMOMETER  
MODEL:RM962A  
Instruction Manual  
INTRODUCTION  
Congratulations on your purchase of the Clock with Temperature  
Display RM962A.  
The RM962A is a multifunction radio controlled clock. It can  
automatically synchronize its current time and date when brought  
within an approximate 1500 km or 1000 miles radius of the radio  
signal generated from the U.S. Atomic Clock.  
Features of this unit include: indoor temperature display, current  
date display, daily crescendo alarm with eight-minute snooze  
function and EL backlight.  
A
B
C
D
E
3-lineLCD  
Displays the time, date, alarm status and temperature  
] Battery-Low icon  
Lights up when batteries are running dry  
[
[
] Radio-Reception Signal  
Indicates the condition of radio reception  
] Alarm-on icon  
Appears when the alarm is activated  
[
[
] Alarm icon  
Appears when the alarm time is displayed  
1
When the batteries are first installed, the unit will automatically  
search for a radio signal.  
To deactivate the auto-reception of RF signal, press and hold the  
ZONE button for 2 seconds. The antenna icon will disappear to  
show this deactivation.  
When in search mode, the antenna icon [  
] will blink. This  
process takes between two (2) and ten (10) minutes. After initial  
search, short periodic reception-signal scans will commence several  
times a day.  
To activate the auto-reception again, press and hold the [  
button for 2 seconds again and the antenna icon will re-appear.  
]
When the RM962A is new and initially set up, reception of the U.S.  
Atomic clock signal can take up to 72 hours.  
“SECONDS” AND DAY-OF-THE-WEEK  
DISPLAY  
The antenna icon indicates the quality of reception.  
The “seconds” and the day-of-the-week share the same section of  
the display.  
STRONG  
WEAK  
NO RECEPTION  
RECEIVING  
day-of-the-week display  
“second” display  
When the reception is complete, the radio-reception signal will  
stop blinking.  
The day-of-the-week is displayed as an abbreviation in three  
languages.  
Interference  
Receptioncanbeaffectedbyanumberoffactors. Forbestreception,  
place the device away from metal objects and electrical appliances.  
To change the “seconds” display to the day-of-the-week display:  
When the “seconds” are displayed, press MODE once.  
Note: Interference from sources such as TV sets can affect  
the signal. If, after batteries have been inserted for ten  
minutes, the signal is not received, then set the time manually  
(see section: How To Set The Calendar Clock Manually).  
To change the day-of-the-week display to the “seconds” display:  
When the day-of-the-week is displayed, press MODE once.  
3
3. Press MODE to confirm and proceed to set the minute, year,  
month, day and display language.  
CALENDAR AND ALARM TIME DISPLAY  
4. For the display language, you can choose between (E) for  
English, (F) for French and (S) for Spanish.  
The calendar and the alarm-time share the same section of the  
display.  
The calendar is displayed in a month-day format.  
Day-of-the-week  
Language  
Monday Tuesday Wed. Thursday Friday Saturday Sunday  
English  
French  
calendar mode  
alarm mode  
To change the calendar display to the alarm-time display:  
When the calendar is displayed, press ALARM once.  
Spanis
5. When finished, press MODE to return to normal display. If  
changes are made on the minutes, the seconds will reset and  
start from zero.  
To change the alarm-time display to the calendar display:  
When the alarm time is displayed, press MODE once.  
HOW TO SET THE CALENDAR  
CLOCK MANUALLY  
HOW TO SET AND ACTIVATE  
THE ALARM  
If the unit is taken outside of the range of radio signal it will need  
to be manually set.  
To set the alarm time:  
1. Press and hold ALARM for two seconds when the alarm time is  
displayed.  
To manually set the clock:  
2. Enter the value for the hour digits using the [ ] button. Hold  
down the button to rapidly increase the value. Press ALARM to  
confirm and go to the minute digits. Enter the value and press  
ALARMtoconfirm.  
1. When the calendar is displayed, press and hold MODE for two  
seconds. The hour value will start to blink.  
2. Enter the hour using the [ ] button. Hold down the button to  
rapidly increase the value.  
4
3. The alarm is automatically activated. To deactivate it, press  
ALARMonce.  
PRECAUTIONS  
This unit is engineered to give you years of satisfactory service if  
you handle it carefully. Here are a few precautions.  
ALARM AND SNOOZE FUNCTION  
1. Do not immerse the unit in water. If you spill liquid over it, dry  
it immediately with a soft, lint-free cloth.  
When the alarm is set, it will activate at the set time. The back light  
will go on for five seconds and the alarm-on icon [  
] will flash.  
2. Do not clean the unit with any alcohol containing detergent,  
abrasive or corrosive materials. They may scratch the plastic  
parts and corrode the electronic circuit.  
The crescendo function allows the alarm to start gently and step up  
its intensity in three steps. Without interruption, the alarm will  
activate for 2 minutes.  
3. Do not subject the unit to excessive force, shock, dust,  
temperature or humidity, which may result in malfunction,  
shorter electronic life span, damaged battery and distorted  
parts.  
To stop the alarm, press ALARM button. If the  
[
] button is pressed, the snooze function  
will be triggered. The alarm will stop for eight minutes before  
activating again.  
4. Do not tamper with the unit’s internal components. Doing so  
will invalidate the warranty on the unit and may cause  
unnecessary damage. The unit contains no user-serviceable  
parts.  
INDOOR TEMPERATURE  
The temperature is shown in Fahrenheit (°F). The unit is capable of  
measuring temperatures within the 23°F and 122°F range. If the  
temperature goes above or below that, the display will show “HHH”  
orLLL”.  
5. Only use fresh batteries as specified in the user’s instructions.  
Do not mix new and old batteries as the old ones may leak.  
6. Always read the user’s instructions thoroughly before operating  
the unit.  
HOW TO RESET THE UNIT  
The RESET button allows you to return all settings to its factory  
values.  
The button is required only when the unit is not operating in a  
favorable way, such as in the rare case of a malfunction.  
5
General Specification  
SPECIFICATIONS  
Battery Type  
: Two(2)UM-4orAAAsize  
Operating Temperature : 23°F to 122°F  
1.5V battery  
Unit Dimension  
Unit Weight  
: 4.09 x 2.52 x .83 inches  
or 104 x 64 x 21 mm (H x W x D)  
Clock Functions  
Radio Control  
: Auto synchronize current time and  
date by Radio signal generated from  
the U.S. Atomic Clock  
: 2.82 ounces or 80 g  
(without battery)  
With carrying pouch  
Calendar  
: Day of week in English /  
French / Spanish  
Current month / day format  
CAUTION  
Clock Time  
Alarm Duration  
Snooze  
: 12-hour format  
: 2 minute crescendo  
: 8 minutes  
The content of this manual is subject to change without  
further notice.  
The specification of this product can be changed without  
any notice.  
Accuracy  
: +/-0.5 second/day  
(when RF is disabled)  
Due to printing limitation, the displays shown in this  
manual may differ from the actual display.  
Temperature Measurement  
The contents of this manual may not be reproduced  
without the permission of the manufacturer.  
Indoor Measurement  
: 23°F to 122°F (-5°C to 50°C)  
Temperature Resolution : 0.2°F (0.1°C)  
TemperatureAccuracy  
:
23°F to 32°F +/-35.6°F  
(-5°C to 0°C +/- 2.0°C)  
32°F to 104°F +/- 33.8°F  
(0°C to 40°C +/- 1.0°C)  
104°F to 122°F +/-35.6°F  
(40°C to 50°C +/- 2.0°C)  
6
CUSTOMER ASSISTANCE  
Should you require assistance regarding this product and its  
operation, please contact our customer care department at  
541-868-8205 or via email at [email protected].  
WARRANTY  
This product is warranted to be free of manufacturing defects for a  
period of 90 days from date of retail purchase. Defective product  
should be directed to the place of retail purchase for exchange.  
Should this not be possible, contact our customer care department  
for assistance and a return material authorization. No returns may  
be made without a return authorization. Warranty exchanges require  
proof of date of purchase (purchase receipt showing date, place and  
product purchased).  
This warranty does not cover product subjected to abuse, misuse,  
accidental damage or tampering.  
7

Toshiba 512E User Manual
Sony T105 User Manual
Sony DREAM MACHINE ICF C275RC User Manual
Sentry Industries CR100 User Manual
Seagate ST32161A User Manual
Seagate CONSTELLATION2 ST9500622NS User Manual
Samsung SGH 2200 User Manual
Samsung 840 EVO MZ7TE500LW User Manual
Panasonic EB GD95 User Manual
Omega Engineering OM EL WIN USB OM EL USB TC User Manual