English
Compact Disc Player
C-701A
Instruction Manual
COMPACT DISC PLAYER
STANDBY/ON
STANDBY
DISPLAY
-
C
701A
Important Safeguards
1. Read Instructions – All the safety and 10. Power Sources – The appliance should be
connected to a power supply only of the type
described in the operating instructions or as
marked on the appliance.
operating instructions should be read before
the appliance is operated.
2. Retain Instructions – The safety and
operating instructions should be retained for
future reference.
11. Polarization – If the appliance is provided with a
polarized plug having one blade wider than the
other, please read the following information:
The polarization of the plug is a safety feature.
The polarized plug will only fit the outlet one
way. If the plug does not fit fully into the outlet,
try reversing it. If there is still trouble, the user
should seek the services of a qualified electrician.
Under no circumstances should the user attempt
to defeat the polarization of the plug.
3. Heed Warnings – All warnings on the
appliance and in the operating instructions
should be adhered to.
4. Follow Instructions – All operating and use
instructions should be followed.
5. Water and Moisture – The appliance should
not be used near water – for example, near a
bathtub, washbowl, kitchen sink, laundry tub, 12. Power-Cord Protection – Power-supply
in a wet basement, or near a swimming pool,
and the like.
cords should be routed so that they are not
likely to be walked on or pinched by items
placed upon or against them, especially near
plugs, convenience receptacles, and the point
where they exit from the appliance.
6. Carts and Stands – The appliance should be
used only with a cart or stand that is
recommended by the manufacturer.
PORTABLE CART WARNING
13. Cleaning – The appliance should be cleaned
6A. An appliance and cart
only as recommended by the manufacturer.
combination should be
moved with care. Quick
stops, excessive force, and
uneven surfaces may cause
14. Nonuse Periods – The power cord of the
appliance should be unplugged from the outlet
when left unused for a long period of time.
the appliance and cart
combination to overturn.
S3125A
15. Object and Liquid Entry – Care should be taken
so that objects do not fall and liquids are not spilled
into the enclosure through openings.
7. Wall or Ceiling Mounting – The appliance
should be mounted to a wall or ceiling only
as recommended by the manufacturer.
16. Damage Requiring Service – The appliance
should be serviced by qualified service
personnel when:
8. Ventilation – The appliance should be
situated so that its location or position does
not interfere with its proper ventilation. For
example, the appliance should not be situated
on a bed, sofa, rug, or similar surface that
may block the ventilation openings; or if
placed in a built-in installation, such as a
bookcase or cabinet that may impede the flow
of air through the ventilation openings, there
should be free space of at least 5 cm (2 in.)
and an opening behind the appliance.
A. The power-supply cord or the plug has
been damaged; or
B. Objects have fallen, or liquid has been
spilled into the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate
normally or exhibits a marked change in
performance; or
E. The appliance has been dropped, or the
enclosure damaged.
9. Heat – The appliance should be situated away
from heat sources such as radiators, heat
registers, stoves, or other appliances (including
amplifiers) that produce heat.
17. Servicing – The user should not attempt to
service the appliance beyond that described in
the operating instructions. All other servicing
should be referred to qualified service personnel.
3
Precautions
1. Power
WARNING
4. Care
From time to time you should wipe the front and
rear panels and the cabinet with a soft cloth. For
heavier dirt, dampen a soft cloth in a weak solu-
tion of mild detergent and water, wring it out dry,
and wipe off the dirt. Following this, dry immedi-
ately with a clean cloth.
BEFORE PLUGGING IN THE UNIT FOR THE FIRST
TIME, READ THE FOLLOWING SECTION CARE-
FULLY.
The voltage of the available power supply differs
according to country or region. Be sure that the
power supply voltage of the area where this unit
will be used meets the required voltage (e.g., AC
230 V, 50 Hz or AC 120 V, 60 Hz) written on the
rear panel.
Do not use rough material, thinners, alcohol or
other chemical solvents or cloths since these could
damage the finish or remove the panel lettering.
5. Points to remember
Setting the STANDBY button to standby does not If this unit is brought from a cold environment to
shut off the power completely. So the power cord a warm one or is in a cold room that is quickly
should be removed from the AC outlet when the heated, condensation may form on the pickup,
unit is not used for a prolonged time.
preventing proper operation. In this case, remove
the disc and leave the power ON for about one
hour to remove the condensation.
2. Do not touch this unit with wet hands
Do not handle this unit or power cord when your
hands are wet or damp. If water or any other liq-
uid enters the case, take this unit to an authorized
service center for inspection.
When transporting this unit, be careful not to
bump it.
3. Location of this unit
Place this unit in a well-ventilated location.
Take special care to provide plenty of ventilation
on all sides of this unit especially when it is placed
in an audio rack. If ventilation is blocked, this unit
may overheat and malfunction.
Do not expose this unit to direct sunlight or heat-
ing units as this unit’s internal temperature may
rise and shorten the life of the pickup.
Avoid damp and dusty places and places directly
affected by vibrations from the speakers. In par-
ticular, avoid placing the unit on or above one of
the speakers.
Be sure this unit is placed in a horizontal position.
Never place it on its side or on a slanted surface as
it may malfunction.
Do not place near tuners or TV sets.
If placed next to a TV or tuner, it may cause recep-
tion interference resulting in some noise in the TV
or tuner output.
4
For U.S. model
The laser is covered by a housing which prevents
exposure during operation or maintenance. How-
ever, this product is classified as a Laser Product
by CDRH (Center for Devices and Radiological
Health) which is a department of the Food and
Drug Administration. According to their regula-
tions 21 CFR section 1002.30, all manufactures
who sell Laser Products must maintain records of
written communications between the manufac-
turer, dealers and customers concerning radiation
safety. If you have any complaints about instruc-
tions or explanations affecting the use of this prod-
uct, please feel free to write to the address on the
back page of this manual. When you write us,
please include the model number and serial num-
ber of your unit.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
In compliance with Federal Regulations, the certi-
fication, identification and the period of manu-
facture are indicated on the rear panel.
FCC INFORMATION FOR USER
CAUTION:
The user changes or modifications not expressly
approved by the party responsible for compliance
could void the user’s authority to operate the
equipment.
NOTE:
This equipment has been tested and found to com-
ply with the limits for a Class B digital device, pur-
suant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio communica-
tions. However, there is no guarantee that inter-
ference will not occur in a particular installation. If
this equipment does cause harmful interference
to radio or television reception, which can be de-
termined by turning the equipment off and on,
the user is encouraged to try to correct the inter-
ference by one or more of the following measures:
5
Precautions
For Canadian model
For British model
Replacement and mounting of an AC plug on the
power supply cord of this unit should be performed
only by qualified service personnel.
NOTE:
THIS CLASS B DIGITAL APPARATUS COMPLIES
WITH CANADIAN ICES-003.
For models having a power cord with a polarized IMPORTANT
plug:
The wires in the mains lead are coloured in accor-
dance with the following code:
Blue : Neutral
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
Brown : Live
As the colours of the wires in the mains lead of
this apparatus may not correspond with the
coloured markings identifying the terminals in your
plug, proceed as follows:
The wire which is coloured blue must be connected
to the terminal which is marked with the letter N
Modele pour les Canadien
REMARQUE:
CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST
CONFORME À LA NORME NMB-003 DU CANADA.
Sur les modèles dont la fiche est polarisée:
ATTENTION: POUR ÉVITER LES CHOCS or coloured black.
ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS The wire which is coloured brown must be con-
LARGE DE LA FICHE DANS LA BORNE nected to the terminal which is marked with the
CORRESPONDANTE DE LA PRISE ET POUSSER letter L or coloured red.
JUSQU’AU FOND.
IMPORTANT
A 5 ampere fuse is fitted in this plug. Should the
fuse need to be replaced, please ensure that the
replacement fuse has a rating of 5 amperes and
that it is approved by ASTA or BSI to BS1362. Check
for the ASTA mark or the BSI mark on the body of
the fuse.
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR
THE SOCKET OUTLET IN YOUR HOME, THEN THE
FUSE SHOULD BE REMOVED AND THE PLUG CUT
OFF AND DISPOSED OF SAFELY. THERE IS A DAN-
GER OF SEVERE ELECTRICAL SHOCK IF THE CUT
OFF PLUG IS INSERTED INTO ANY 13 AMPERE
SOCKET.
If in any doubt, please consult a qualified electri-
cian.
Declaration of Conformity
We,
ONKYO EUROPE
ELECTRONICS GmbH
INDUSTRIESTRASSE 20
82110 GERMERING,
GERMANY
declare in own responsibility, that the ONKYO product described
in this instruction manual is in compliance with the corresponding
technical standards such as EN60065, EN55013, EN55020 and
EN61000-3-2, -3-3.
GERMERING, GERMANY
I. MORI
ONKYO EUROPE ELECTRONICS GmbH
6
Table of contents
Connections
Connecting to Onkyo Separate Collection series components ......................... 8
Connecting to the other components ........................................................... 10
Operations
Playing CDs................................................................................................... 13
Other Information
Handling CDs................................................................................................ 19
Troubleshooting ............................................................................................ 20
Indexed to parts and controls ........................................................................ 21
Specifications ................................................................................................ 23
Supplied accessories
Check that the following accessories are supplied with this unit.
remote control cable × 1
Audio connection cable × 1
Instruction Manual (This Manual × 1)
7
Connections
Connecting to Onkyo Separate Collection series components
This section introduces you to the other Separate Collection Series system components and their con-
venient system functions, followed by instruction on how to connect the system.
The following Separate Collection Series components are available:
• MD-101A ......... Minidisc (MD) Recorder (Not available in U.S. and Canada)
• R-801A ............. FM Stereo/AM Tuner Amplifier
• CDR-201A ........ Audio CD recorder
Note that the available components may vary according to the area.
Combining the C-701A Compact Disc player with the above system components enables you to oper-
ate the following convenient functions:
• Auto Power On
– You can turn on the power to the amplifier by pressing the STANDBY/ON button on one of the
system components. You can also turn off the power to only the C-701A by pressing this button.
Notes:
• If “DVD” has been selected as an input source for a connected R-801A, you need to change the
input source to “CD” to operate the CD player in the system. (Refer to the R-801A instruction
manual for more information.)
• Direct Change
Press the following button on the component you want to operate. The amplifier will automatically
select the input from the corresponding component:
– The play button on the CD player, MD recorder, or stereo cassette tape deck.
• Remote Control Operation
You can operate all the system components using the remote controller supplied with the amplifier
R-801A.
• Program Timer
You can operate the timer playback and recording functions using the R-801A. (Refer to the R-801A
instruction manual for more information.)
• Sleep Timer
You can fall asleep to a music/radio program using the timer. (Refer to the R-801A instruction manual
for more information.)
• CD Dubbing
Simple CD dubbing using an MD recorder or CD recorder is possible with the pressing of a single
button. (Refer to the MD-101A or CDR-201A Instruction Manual for more information).
• CD/MD/CDR Synchro Recording
When using an MD recorder or CD recorder to record from the CD player, you can record with simply
starting on a CD player. (Refer to the MD-101A or CDR-201A instruction manual for more informa-
tion.)
• Dubbing a specific track from CD
You can specify a track on a CD and easily dub it to a connected MD recorder or CD recorder. (Refer
to the MD-101A or CDR-201A instruction manual for more information.)
8
Notes
Using the remote controller
• Place the unit away from strong light such as
direct sunlight or inverted fluorescent light which
can prevent proper operation of the remote
controller.
The unit is not shipped with a remote controller.
However, you can use a remote controller (RC-
466S) that is shipped with the R-801A.
• Using another remote controller of the same
type in the same room or using the unit near
equipment which uses infrared rays may cause
operational interference.
Remote controller RC-466S
When the remote controller RC-466S supplied with
the R-801A is used, operate the remote controller
pointing towards the R-801A’s remote sensor.
• Do not put any object such as a book on the
remote controller. The buttons of the remote
controller may be pressed by mistake and drain
the batteries.
Be sure to make the
the connection is incomplete, you cannot use the
remote controller to operate the unit.
connection securely. If
• Make sure the audio rack doors do not have
colored glass. Placing the unit behind such doors
may prevent proper remote controller operation.
• If there is any obstacle between the remote con-
troller and the remote control sensor, the re-
mote controller will not operate.
R-801A
Remote control
sensor
30°
30°
5m
C-701A
RC-466S
9
Connecting to the other components
Before connecting
• Do not connect the unit’s AC power cord to a wall outlet until you have completed all the other
connections.
• On each pair of connectors, a red connector (marked R) corresponds to the right channel, and a
white connector (marked L) to the left channel. Connect white plugs of audio connection cables to
L connectors and connect red plugs of audio connection cables to R connectors.
Audio connection cable
To L connectors
To R connectors
(White)
(Red)
(White)
(Red)
To L connectors
To R connectors
• Insert the plug securely. If the connection is incomplete, noise or malfunction may result.
Improper connection
Insert completely
• When you use a digital audio optical cable, do not bend it sharply nor coil it tightly.
• Bundling an audio connection cable with the power cord or speaker cord may degrade the sound
quality.
• To use the unit with the other Onkyo Separate Collection series components, follow the connection
diagram in the R-801A instruction manual to connect the unit to the system.
Note:
The 230-240 V model is shown in the following illustrations.
10
Connections
ANALOG OUTPUT
DIGITAL OUTPUT
OPTICAL
REMOTE
CONTROL
R
L
AC OUTLET
AC 230-240V
UNSWITCHED
100W MAX.
50Hz
Audio
connection
cable
COMPACT DISC PLAYER
-
MODEL NO. C 701A
:
RATING AC 230-240V
50Hz 8W
To wall outlet
3
2
cable
1
L
R
connector
DIGITAL IN
CD
Optional Optical
fiber cable
Amplifier without
digital input terminal
MD recorder, CD recorder,
DAT deck, etc.
1 Connection with the Amplifier
Connect the ANALOG OUTPUT connectors on the rear panel of C-701A and the amplifier’s CD
input connectors using the audio connection cable. Refer to the amplifier’s instruction manual for
connections.
2 Connection to DIGITAL OUTPUT connector
Using the DIGITAL OUTPUT connector, you can record on digital audio equipment, such as an MD,
CD-R, DAT, etc. For digital recording, connect the equipment to either DIGITAL OUTPUT OPTICAL
connector using the optical cable (option). These connectors can also be used for connecting an
amplifier which is equipped with a digital input connector.
A connector protection cap is attached to the digital output connector. Re-
move this cap to connect the unit to other digital equipment. When you are
not using the digital output connector, replace this cap.
3 AC OUTLET (UNSWITCHED)
The AC power cord of another compo-
nent can be connected to this AC OUT-
ANALOG OUTPUT
DIGITAL OUTPUT
OPTICAL
REMOTE
CONTROL
R
L
AC OUTLET
AC 230-240V
UNSWITCHED
100W MAX.
50Hz
LET connector.
This means that if the C-701A is plugged
into an AC outlet, AC power is available
to this AC OUTLET even if the C-701A is
off.
The shape and capacity of the AC outlet
may differ depending on the area of pur-
chase. Make sure that the capacity of other
components connected to this unit does
not exceed the capacity that is printed on
the rear panel.
COMPACT DISC PLAYER
-
701A
RATING: AC 230-240V
50Hz 8W
MODEL NO.
C
230-240 V, 50 Hz and
220-240 V, 50/60 Hz
models
120 V, 60 Hz models
Capacity is
120 watts.
Capacity is
100 watts.
11
Connecting to the other components
Connecting the
connector
Connecting the power cord
If you are using other ONKYO components equipped
with connectors, you can control these com-
Insert the AC power cord into a wall
outlet. The STANDBY indicator lights.
ponents using the amplifier‘s remote controller.
Before connecting
• The amplifier must be connected in the
system hookups for
• Each component has two
control operations.
connectors. There
To wall outlet
is no difference between those connectors.
• The components may be connected in any order.
• Remote control operation is not possible if only
STANDBY/ON
the
the
remote control cable is connected to
connectors. Connect the audio connec-
STANDBY
tion cables correctly.
The illustration below is the
hookup example.
Light
With these hookups, you can operate the CD Syn-
chro Recording (see “CD/MD/CDR synchro record-
ing” on page 8).
• To use the unit with the other Onkyo Sepa-
rate Collection series components, follow the
connection diagram in the R-801A instruc-
tion manual to connect the unit to the sys-
tem.
Tuner Amplifier
• If you press the (OPEN/CLOSE) button while
the unit is in the STANDBY mode, the power
will turn on and the display will light up auto-
matically.
MD recorder
C-701A
cable
Supplied
cable
REMOTE
CONTROL
Note
An
remote control cable equipped with a 1/
8 in. (3.5mm) diameter miniature two-conductor
phone plug is included with this unit and with ev-
ery tuner and cassette deck that bears the
mark.
12
Operations
Playing CDs
RC-466S
(Supplied with R-801A)
Disc tray
STANDBY/ON
COMPACT DISC PLAYER
STANDBY/ON
ACOUSTIC
PRESENCE
STANDBY/
ON
CDR/PC
CD/DVD
TAPE
MD
INPUT SELECTOR
FM
AM
UP
TAPE REW
TAPE FF
MUTING
DOWN
SLEEP
CLOCK
TIMER
ENTER
STANDBY/ON
MODE
TAPE
STANDBY
DISPLAY
REPEAT
CD/DVD
CLEAR
MD
-
C
701A
SCROLL
CDR
1
2
3
4
Normal play
5
Press the
button.
The CD player starts playing the first track
(track 1).
1
Press STANDBY/ON button to turn
on the unit.
Remote controller
The STANDBY indicator goes off, and the dis-
play will light up.
Remote controller
• If the
button is pressed when the unit is
STANDBY/ON
STANDBY/ON
in STANDBY mode, it turns on automatically
then starts playing the CD, if it is loaded in the
disc tray. Your tuner amplifier also turns on if it
is an Onkyo R-801A (refer to page 8).
STANDBY
If the CD player does not start playing when
2
Press the
to open the disc tray.
(OPEN/CLOSE) button
the
button is pressed
• The disc may be upside down in the tray. Press
the button to open the disc tray. If you can-
not see the label on the disc, turn the disc over,
label side up.
• Moisture may have formed inside the CD player.
Remove the CD from the disc tray and leave
the power on for about one hour to evaporate
the moisture.
Label side
3
4
Put the disc in the
disc tray, with its
label side facing up.
To stop playing
Press the button.
Remote controller
Press the button to close the disc
tray.
To pause playing
Note
You can skip this step by pressing the
button instead of the button. In this case,
the disc tray closes automatically and Track 1
starts playing.
Press the
button or the or
button on
the remote controller. (The PAUSE indicator lights.)
To resume play, press the
button.
Remote controller
or
13
Playing CDs
RC-466S
(Supplied with R-801A)
COMPACT DISC PLAYER
UP
TAPE REW
TAPE FF
,
,
MUTING
DOWN
SLEEP
CLOCK
TIMER
ENTER
STANDBY/ON
MODE
TAPE
REPEAT
CD/DVD
STANDBY
DISPLAY
CLEAR
MD
-
C
701A
SCROLL
CDR
1
5
9
2
6
3
7
4
8
Number
buttons
,
10/0
--/---
REMOTE CONTROLLER RC-466S
Starting playback from a given track
Search play
1
Select the track you wish to play
using the and buttons (or
1
Hold down the
(or the and
or
button
buttons on the
the
and
buttons on the re-
remote controller) during play.
mote controller).
Remote controller
Remote controller
2
Press the
button.
2
Release your finger when the mu-
sic you would like to listen to is
reached.
The CD player starts playing the selected track.
Remote controller
The music starts playing from that point.
Skip play
Using the remote controller
Each time the
the remote controller) is pressed when a disc is
playing, the pickup will advance one track; and
button (or the
button on
With the RC-466S remote controller (supplied with
the R-801A), you can select the track to play us-
ing the number buttons. In either case, selecting a
track automatically starts play of that track.
each time the
button (or the
button on
the remote controller) is pressed when a disc is
playing, the pickup will go back one track. Press
these buttons until the desired track number is
selected.
How to enter track numbers
To enter track #5 :
5
Remote controller
To enter track #10 :
10/0
-- ---
/
To enter track #21 :
2
1
14
Checking the elapsed or remaining
time
Display information
The display changes each time you press the DIS-
PLAY button during play.
When you press the DISPLAY button
while the unit is stopped, the following
indication appears.
a
Shows how long the current track has been
playing.
b
c
Shows how much time is left for the track cur-
rently playing.
For Track 21 or later tracks, the display shows
“_ _: _ _” (or “_ _ _: _ _”).
Shows how much playing time is left for the
entire disc.
Total number
of tracks on the disc
Total playing time
on the disc
During Memory play, this display shows the
playing time remaining for the entire sequence
of tracks programmed into memory.
For Track 21 or later tracks, the display shows
“_ _: _ _” (or “_ _ _: _ _”).
Checking the playing time of each track
You can view the playing time of each song on
the disc by pressing the
or
button re-
a
peatedly while the unit is stopped.
For Track 21 or later tracks, the display shows
DISPLAY
“_ _: _ _” (or “_ _ _: _ _”).
b
c
DISPLAY
DISPLAY
Track’s total
playing time
Track number
Notes on the CD player time display
In the following cases, the time display may indi-
cate “– – : – –” (in rare cases “– – – : – –” is
displayed) due to the memory limitations.
• If you switch to the remaining time display while
the CD player is playing the 21st or later song
on the disc
• If you switch to the total remaining time display
after storing the 21st or later song on the disc
• If you switch to the total remaining time display
after the CD player plays songs from memory
for more than 99 minutes 59 seconds, or
• If you switch to the total remaining time display
during random playback of a CD that contains
21 or more songs.
15
Playing CDs
RC-466S
(Supplied with R-801A)
CDR/PC
TAPE
INPUT SELECTOR
CD/DVD
MD
FM
AM
UP
TAPE REW
TAPE FF
MUTING
DOWN
SLEEP
CLOCK
TIMER
ENTER
MODE
TAPE
MODE
REPEAT
CD/DVD
CLEAR
MD
SCROLL
CDR
1
5
9
2
6
3
7
4
8
10/0
--/---
• To perform Random, Memory or Repeat play,
you need the following remote controller:
RC-466S (supplied with R-801A)
Playing tracks in random order
(Random play)
1
Press the MODE button repeatedly
while the unit is stopped to turn
on the RDM indicator.
MODE
RDM
2
Press the
button.
The CD player plays the tracks in a random
order.
To quit Random play
• Press the MODE button on the remote control-
ler repeatedly to turn off the RDM indicator.
• Playback is cancelled when you press the
(OPEN/CLOSE) button to open the tray.
16
RC-466S
(Supplied with R-801A)
CDR/PC
TAPE
INPUT SELECTOR
CD/DVD
MD
FM
AM
UP
TAPE REW
TAPE FF
MUTING
DOWN
SLEEP
CLOCK
TIMER
ENTER
,
MODE
TAPE
MODE
REPEAT
CD/DVD
CLEAR
MD
CLEAR
SCROLL
CDR
1
5
9
2
6
3
7
4
8
Number
buttons
10/0
--/---
How to enter track numbers
Memory play
5
To enter track #5 :
To enter track #10 :
• Up to 25 tracks can be stored in memory.
10/0
1
Press the MODE button repeatedly
while the unit is stopped to turn
on the MEM indicator.
MODE
-- ---
/
To enter track #21 :
2
1
To view program information
After Memory play is finished, press the
MEM
or
button repeatedly (while the unit is stopped) to
display the track numbers in the programmed or-
der.
2
3
Press the number button(s) to se-
lect your desired track.
To enter further track numbers into memory,
repeat this step.
To clear the last track stored
Press the
button.
The track in memory are played in the order
you specified.
Press the CLEAR button while the unit is stopped.
The last track you stored into memory is cleared.
CLEAR
Note
• If more than 25 tracks are already in memory,
“FULL” will light on the time display to indicate
that the memory is full.
• If the MEMORY button is pressed during play,
the currently playing track is stored into memory.
To quit Memory play
Press the MODE button repeatedly while the unit
is stopped to turn off the MEM indicator, or just
press
.
The contents of the memory are completely
To stop Memory play
cleared.
Press the button.
MODE
17
Playing CDs
RC-466S
(Supplied with R-801A)
CDR/PC
TAPE
INPUT SELECTOR
CD/DVD
MD
FM
AM
UP
TAPE REW
TAPE FF
MUTING
DOWN
SLEEP
CLOCK
TIMER
ENTER
MODE
TAPE
REPEAT
CD/DVD
REPEAT
CLEAR
MD
SCROLL
CDR
1
5
9
2
6
3
7
4
8
10/0
--/---
To quit Repeat play
Press the REPEAT or button.
The REPEAT indicator disappears to indicate that
you are in Normal play mode.
Playing all tracks on disc (Repeat
play)
1
Press the REPEAT button while the
unit is stopped to enter Repeat play
mode.
REPEAT
or
The REPEAT indicator lights.
REPEAT
RPT
2
Press the
play.
button to start Repeat
• When the last track is completed, the CD
player returns to the beginning of the disc
and plays all the tracks on the disc again.
• Repeat play can be performed in conjunc-
tion with Normal, Memory and Random
play modes. The REPEAT button can be
pressed even when a track is playing.
Play mode Repeated tracks
Normal
All tracks on disc
Memory
Random
Tracks in memory (in stored order)
Repeats random play of all tracks
on disc.
18
Other Information
Handling CDs
Playable discs
Taking the CD out of the disc
case
This unit can play back the following discs.
Disc mark
Contents
Disc size
1
Hold the disc case in the palm of
one hand and pull the cover up-
ward with the other hand to open
the disc case.
12 cm
Audio
CDs
Audio
8 cm (CD single)
You cannot play back discs other than those listed
above.
Do not play CD-ROMs intened for computer use
or non-audio compact discs. Doing so may cause
high-pitched noises or other unpredictable results
that may damage speakers, amplifiers, and other
connected components.
2
While pushing on the center grip
of the disc case with your finger,
take out the disc by holding its
edges.
Avoid using heart-shaped or octagonal discs. Play-
ing irregularly shaped discs may damage the in-
ternal mechanism of the unit.
Do not use discs on which adhesive from adhesive
tape or a disc label (if it is a rental disc) remains.
Otherwise, you may not be able to eject the discs
or the unit may become inoperative.
Important notes on handling CDs
• Carefully lift the disc from the disc case, mak-
ing sure to only hold the disc by its edges or the
hole in the middle.
• A dry, soft cloth may be used to wipe dust and
fingerprints off the surface of CDs.
• Do not use volatile agents on discs, such as thin-
ner or benzine. Also, do not use conventional
record cleaner or antistatic agents.
• Do not place a CD in direct sunlight or locations
subject to high humidity or low temperature.
• Do not store a CD in the CD player tray for long
periods of time.
Excessive electrical interference may temporarily
render this system’s sensitive microcomputer
inoperable. If this happens, unplug the system
for at least five seconds.
19
Troubleshooting
If you have any problems with the unit, please check the troubleshooting table below first.
For any problems not covered in the table, please consult your nearest Onkyo authorized service center.
Symptom
Cause
Remedy
STANDBY/ON button is • Power cord plug is not properly con- • Insert the plug firmly.
pressed, but power does not
come on.
nected to AC outlet.
Disc is loaded in the disc tray,
but playback will not begin.
• Disc is in the disc tray upside down. • Load the disc with the label facing
upward.
• Disc is dirty.
• Clean the disc.
• Moisture has accumulated inside the
CD player.
•
Remove the disc from the disc tray, place
the CD player in a warm place and leave
the power on for about one hour.
• You are playing an incorrectly-re-
corded CD-R.
• Replace the disc.
• Incomplete or incorrect connections.
No sound
• Check all cable connections. (See
pages 10-12)
• Insert all plugs firmly into jacks.
• Improper input selector switch setting • Set switch to proper position. See your
on amplifier.
amplifiers operating instructions for
more information.
Disc skipping
• Disc is dirty.
• Clean the disc. (See page 19)
• Disc is scratched.
• CD player has been bumped.
• Replace the disc.
• Place the CD player in a more stable
location.
• Clean the disc. (See page 19)
Search time (when moving to
a specific track) is extremely
long.
• Disc is dirty.
• Replace the disc.
• Disc is scratched.
• Load a disc into the tray.
Track numbers cannot be • No disc in the tray.
stored in the memory.
• Use only the track numbers on the
disc.
• A track number not on the disc is
being input.
• Turn off the TV, or move the unit far-
ther from the TV.
Noise during play
• Interference from TV
• Replace the batteries.
Remote controller does not
function.
• Battery level is low.
• Remote controller is possible within a
distance of approximately 5 meters
from the unit’s sensor and a detection
range of 30°.
• Your position is too far from the unit’s
remote control sensor or out of the
sensor’s detection angle.
• Operate from a different position or
remove the obstacle.
• An obstacle exists between you and
the unit’s remote control sensor.
• Connect the system components
properly according to the R-801A in-
struction manual.
• The system components are not con-
nected properly.
• Select “CD” as the input source. (Re-
fer to the instruction manual for the
R-801A.)
• “DVD” has been selected as the in-
put source for R-801A.
20
Indexed to parts and controls
For operational instructions, refer to the page indicated in parentheses.
Front panel
Disc tray [13]
Button
(Open/Close)
[13, 18]
STANDBY/ON
button [13]
COMPACT DISC PLAYER
STANDBY/ON
STANDBY
button
(Play/Pause) [13,
14, 16, 17, 18]
DISPLAY
button (Stop)
[13]
-
C 701A
STANDBY
indicator [12]
,
button (Track
down/Fast reverse, Track up/
Fast forward) [14, 15]
DISPLAY button [15]
Display
Play/Pause indicator
RDM (Random) indicator
MEM (Memory) indicator
RPT (Repeat) indicator
Multi-purpose display
21
Indexed to parts and controls
Remote controller
Remote controller supplied with the R-801A (RC-466S)
To operate the supplied remote controller, make the appropriate connection to the
nectors.
remote con-
RC-466S
STANDBY/ON
ACOUSTIC
PRESENCE
STANDBY/ON button [13]
CDR/PC
CD/DVD
TAPE
MD
INPUT SELECTOR
FM
AM
UP
TAPE REW
TAPE FF
: Track down button [14]
MUTING
: Track up button [14]
DOWN
: Fast reverse button
[14, 17]
SLEEP
CLOCK
TIMER
ENTER
MODE
TAPE
: Fast forward button
[14, 17]
CD player operation buttons
REPEAT
CD/DVD
MODE : Mode select button [16, 17]
Each press changes the mode as fol-
lows:
CLEAR
MD
SCROLL
CDR
RDM (RANDOM)
1
5
9
2
6
3
7
4
8
MEM (MEMORY)
OFF
Number buttons [14, 17]
1~9, 10/0 : Number buttons
--/--- : Ten‘s hold button
-- ---
/
10/0
-
REMOTE CONTROLLER RC 466S
REPEAT : Repeat mode button [18]
: Stop button [13, 17]
: Pause button [13]
: Play button [13, 14, 17, 18]
CLEAR : Clear button [17]
22
Specifications
Signal readout system : Optical non-contact
Wow and Flutter :
Below threshold of measurability
Reading rotation : About 500 – 200 r.p.m.
(constant linear velocity)
Output level : 2 volts r.m.s.
Power consumption :
Linear velocity : 1.2 –1.4 m/s
AC 230-240 V, 50 Hz model : 8 watts
AC 220-230V, 50Hz/60Hz : 8 watts
AC 120 V, 60 Hz model : 9 watts
Error correction system :
Cross Interleave Reed Solomon code
D/A converter : 1 bit D/A converter
Power supply rating :
Sampling frequency : 352.8 kHz
(Eight-times oversampling)
AC 230-240 V, 50 Hz
AC 220-230V, 50Hz/60Hz
AC 120 V, 60 Hz
Number of channels : 2 (stereo)
Frequency response : 5 Hz – 20 kHz
Total harmonic distortion : 0.009% (at 1 kHz)
Dynamic range : 92 dB
Dimensions (W x H x D) :
155 x 76 x 283.5 mm (chinese models)
6-1/8" x 3" x 11-3/16"
155 x 76 x 281.5 mm (other models)
6-1/8" x 3" x 11-1/16"
Signal to noise ratio : 80 dB
Channel separation : 80 dB (at 1 kHz)
Weight : 2.0 kg, 4.4 lbs.
Specifications and external appearance are subject to
change without notice because of product improvements.
23
Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN
Tel: 072-831-8111 Fax: 072-833-5222
ONKYO U.S.A. CORPORATION
18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.
ONKYO EUROPE ELECTRONICS GmbH
Industriestrasse 20, 82110 Germering, GERMANY
ONKYO CHINA LIMITED
Units 2102-2107, Metroplaza Tower I, 223 Hing Fong Road, Kwai Chung,
N.T., HONG KONG Tel: 852-2429-3118 Fax: 852-2428-9039
HOMEPAGE
E
SN 29343190
I0107-1
|