|
Nokia 6600i slide User Guide
9215856
Issue 2
Contents
3
Contents
4
Safety
WATER-RESISTANCE
Your device is not water-
resistant. Keep it dry.
Safety
Read these simple guidelines. Not
following them may be dangerous or
illegal. Read the complete user guide for
further information.
SWITCH ON SAFELY
Do not switch the device on
when wireless phone use is
prohibited or when it may
cause interference or danger.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep
your hands free to operate the
vehicle while driving. Your first
consideration while driving
should be road safety.
INTERFERENCE
All wireless devices may be
susceptible to interference,
which could affect
performance.
SWITCH OFF IN RESTRICTED AREAS
Follow any restrictions. Switch
the device off in aircraft, near
medical equipment, fuel,
chemicals, or blasting areas.
QUALIFIED SERVICE
Only qualified personnel may
install or repair this product.
ACCESSORIES AND BATTERIES
Use only approved accessories
and batteries. Do not connect
incompatible products.
ACCESSORIES
Use only approved accessories.
Do not connect incompatible
products.
Make it your phone
Install SIM card and battery
5
Make it your phone
Start up
Always switch the device off and
disconnect the charger before removing
the battery.
Get to know your phone, insert the
battery, SIM card, and memory card, and
learn some important information about
your phone.
This phone is intended for use with a
BL-4U battery. Always use original Nokia
batteries. See "Nokia battery
Keys and parts
The SIM card and its contacts can be easily
damaged by scratches or bending, so be
careful when handling, inserting, or
removing the card.
1
2
Push the release button, and open the
back cover. Remove the battery.
Open the SIM card holder. Insert the
SIM card into the holder with the
contact surface facing down. Close the
SIM card holder.
1
2
3
4
5
6
7
8
9
Earpiece
Display
Navi™ key (scroll key)
Left selection key
Call key
Keypad
End/Power key
Right selection key
Light sensor
3
Observe the battery contacts, and
insert the battery. Replace the back
cover.
10 Front camera
11 Charger connector
12 Strap eyelet
13 Back cover release button
14 USB cable connector
15 Camera flash
16 Main camera
17 Loudspeaker
6
Make it your phone
Insert a memory card
Use only compatible microSD cards
approved by Nokia for use with this
device. Nokia uses approved industry
standards for memory cards, but some
brands may not be fully compatible with
this device. Incompatible cards may
damage the card and the device and
corrupt data stored on the card.
2
3
Connect the charger to the device.
You phone supports microSD cards of up
When the battery is fully charged,
disconnect the charger from the
device, then from the wall outlet.
to 16 GB.
1
Switch the device off, and remove the
back cover and battery.
You also may charge the battery with a
USB cable with power from a computer.
1
2
Connect the USB cable to the USB port
of a computer and to your device.
When the battery is fully charged,
disconnect the USB cable.
If the battery is completely discharged, it
may take several minutes before the
charging indicator appears on the display
or before any calls can be made.
The charging time depends on the charger
used. Charging a BL-4U battery with the
AC-8 charger takes approximately 1 hour
30 minutes while the phone is in the home
screen mode.
2
3
Slide the memory card holder to
unlock.
Open the card holder, and insert the
memory card into the holder with the
contact surface facing inwards.
Antenna
4
5
Close the card holder, and slide it to
lock.
Replace the battery and back cover.
Charge the battery
Your battery has been precharged, but the
charging levels may vary.
1
Connect the charger to a wall outlet.
Your device may have internal and
external antennas. Avoid touching the
antenna area unnecessarily while the
antenna is transmitting or receiving.
Make it your phone
7
About your phone
Contact with antennas affects the
communication quality and may cause a
higher power level during operation and
may reduce the battery life.
The wireless device described in this guide
is approved for use on the WCDMA 850 and
2100 and GSM 850, 900, 1800, and 1900
networks. Contact your service provider
for more information about networks.
The figure shows the antenna area
marked in grey.
When using the features in this device,
obey all laws and respect local customs,
privacy and legitimate rights of others,
including copyrights.
Copyright protection may prevent some
images, music, and other content from
being copied, modified, or transferred.
Headset
Warning:
Continuous exposure to high volume may
damage your hearing. Listen to music at a
moderate level, and do not hold the device
near your ear when the loudspeaker is in
use.
Your device may have preinstalled
bookmarks and links for third-party
internet sites. You may also access other
third-party sites through your device.
Third-party sites are not affiliated with
Nokia, and Nokia does not endorse or
assume liability for them. If you choose to
access such sites, you should take
Warning:
When you use the headset, your ability to
hear outside sounds may be affected. Do
not use the headset where it can
endanger your safety.
precautions for security or content.
When connecting any external device or
any headset, other than those approved
by Nokia for use with this device, to the
USB connector, pay special attention to
volume levels.
Warning:
To use any features in this device, other
than the alarm clock, the device must be
switched on. Do not switch the device on
when wireless device use may cause
interference or danger.
Strap
1
Open the back cover.
Remember to make back-up copies or
keep a written record of all important
information stored in your device.
When connecting to any other device,
read its user guide for detailed safety
instructions. Do not connect incompatible
products.
2
Hook a strap behind the clamp, and
close the back cover.
Important: Use only services that you
trust and that offer adequate security and
protection against harmful software.
8
Make it your phone
Network services
Further features are Automatic
When the device or keypad is locked, calls
may be possible to the official emergency
number programmed into your device.
To use the phone you must have service
from a wireless service provider. Many of
the features require special network
features. These features are not available
on all networks; other networks may
require that you make specific
arrangements with your service provider
before you can use the network services.
Your service provider can give you
Access codes
To set how your phone uses the access
codes and security settings, select
Menu >Settings >Security >Access
codes.
instructions and explain what charges will
apply. Some networks may have
limitations that affect how you can use
network services. For instance, some
networks may not support all language-
dependent characters and services.
•
The security code helps to protect
your phone against unauthorised use.
The preset code is 12345. You can
change the code and set the phone to
request the code. Some operations
require the security coderegardless of
the settings, for example if you want
to restore the factory settings. Keep
the code secret and in a safe place
separate from your phone. If you
forget the code and your phone is
locked, your phone will require
service and additional charges may
apply. For more information, contact
a Nokia Care point or your phone
dealer.
Your service provider may have requested
that certain features be disabled or not
activated in your device. If so, these
features will not appear on your device
menu. Your device may also have a special
configuration such as changes in menu
names, menu order, and icons. Contact
your service provider for more
information.
Functions without a SIM card
Some functions of your phone may be
used without inserting a SIM card, such as
Organiser functions and games. Some
functions appear dimmed in the menus
and cannot be used.
•
•
•
The PIN (UPIN) code, supplied with the
SIM (USIM) card, helps to protect the
card against unauthorised use.
The PIN2 (UPIN2) code, supplied with
some SIM (USIM) cards, is required to
access certain services.
Keypad lock
To lock the keypad to prevent accidental
keypresses, select Menu, and press *
within 3 seconds.
PUK (UPUK) and PUK2 (UPUK2) codes
may be supplied with the SIM (USIM)
card. If you enter the PIN code
incorrectly three times in succession,
you are asked for the PUK code. If the
codes are not supplied, contact your
service provider.
To unlock the keypad, select Unlock, and
press * within 1.5 seconds. If requested,
enter the lock code.
To answer a call when the keypad is
locked, press the call key. When you end
or reject the call, the keypad locks
automatically.
•
The barring password is required
when using the call barring service to
Make it your phone
9
restrict calls to and from your phone
(network service).
Display
•
To view or change the security
module settings for the browser,
select Menu >Settings >
Security >Security module sett..
Switch the device on and off
Switch on and off
Press and hold the power key.
Enter the PIN code
If requested, enter the PIN code (displayed
as ****).
1
Network type indicator and signal
strength of the cellular network
Battery charge status
Set the time and date
If requested, enter the date, the local time,
and the time zone and the daylight saving
time of your location.
2
3
4
Indicators
Name of the network or the operator
logo
5
6
7
8
9
Clock
When you switch on your device for the
first time, you may be prompted to get the
configuration settings from your service
provider (network service). For more
information, contact your service
provider.
Display
Function of the left selection key
Function of the scroll key
Function of the right selection key
You can change the function of the left and
right selection key. See "Left and right
Standby mode
When the phone is ready for use, and you
have not entered any characters, the
phone is in the standby mode.
Power saving
Your phone has a Power saver and a
Sleep mode feature in order to save
battery power in the standby mode when
no keys are pressed. These features may
be activated. See "Display", p. 13.
Active standby
The active standby mode displays a list of
selected phone features and information
that you can access directly.
To activate or deactivate the active
standby mode, select Menu >Settings >
10 Make it your phone
Display >Active standby >Active
Bluetooth connectivity is turned
on.
standby mode.
If you have two phone lines, the
second phone line is selected.
All incoming calls are diverted to
another number.
In the active standby mode, scroll up or
down to navigate in the list, and select
Select or View. The arrows indicate that
further information is available. To stop
navigation, select Exit.
To organise and change the active
standby mode, select Options and from
the available options.
Calls are limited to a closed user
group.
The currently active profile is
timed.
Flight mode
Use the flight mode in radio sensitive
environments — on board aircraft or in
hospitals — to deactivate all radio
frequency functions. You can still access
your calendar, phone numbers, and
offline games. When the flight mode is
Shortcuts in the standby mode
List of dialled numbers
Press the call key once. To make a call,
scroll to the number or name, and press
the call key.
active,
is displayed.
Start the web browser
To activate or set up the flight mode,
select Menu >Settings >Profiles >
Flight >Activate or Personalise.
Press and hold 0.
Call the voice mailbox
Press and hold 1.
To deactivate the flight mode, select any
other profile.
Use other keys as shortcuts
Emergency call in flight mode
Enter the emergency number, press the
call key, and when Exit flight profile? is
displayed, select Yes.
Indicators
You have unread messages.
You have unsent, cancelled, or
failed messages.
You have missed calls.
The keypad is locked.
The phone does not ring for
incoming calls or text messages.
An alarm is set.
The phone is registered to the
GPRS or EGPRS network.
/
The phone has an open GPRS or
EGPRS connection.
/
The GPRS or EGPRS connection is
suspended (on hold).
/
Make it your phone 11
Phone settings
Warning:
With the Flight profile you cannot make or
receive any calls, including emergency
calls, or use other features that require
network coverage. To make calls, you
must first activate the phone function by
changing profiles. If the device has been
locked, enter the lock code.
Select Menu >Settings >Phone and
from the following:
Language settings — to set the display
language of your phone, select Phone
language. . To set a language for the
voice commands, select Recognition
lang..
Memory status — to check the memory
If you need to make an emergency call
while the device is locked and in the Flight
profile, you may be also able to enter an
official emergency number programmed
in your device in the lock code field and
select 'Call'. The device will confirm that
you are about to exit Flight profile to start
an emergency call.
consumption
Automatic keyguard — to lock the
keypad automatically after a preset time
when the phone is in the standby mode
and no function has been used.
Security keyguard — to ask for the
security code when you unlock the
keyguard
Tapping
Sensor settings — to activate and adjust
the tapping function
The tap function allows you to quickly
mute and reject calls and alarm tones, and
to display a clock just by double-tapping
the back or front of the phone when the
slide is closed.
Flight query — to be asked whether to
use the flight mode when you switch the
phone on. With the flight mode, all radio
connections are switched off.
Select Menu >Settings >Phone >
Sensor settings to activate the tap
function and vibration feedback.
Phone updates — to receive software
updates from your service provider
Mute calls or alarms
(network service). This option may not be
available, depending on your phone. See
Double-tap the phone.
Reject a call or snooze an alarm after
Network mode — to use both the UMTS
and the GSM network. You cannot access
this option during an active call.
muting it
Double-tap the phone again.
Operator selection — to set a cellular
Display the clock
network available in your area
Double-tap the phone.
Help text activation — to select whether
the phone shows help texts
If you have missed calls or received new
messages, youmust view thembeforeyou
can see the clock.
Start-up tone — to play a tone when you
switch the phone on
12 Make it your phone
Security settings
into your phone. See "Browser
When security features that restrict calls
are in use (such as call barring, closed user
group, and fixed dialling), calls may be
possible to the official emergency number
programmed into your device. Call barring
and call diverting cannot be active at the
same time.
Security module sett. — to view security
module details, activate the module PIN
request, or change the module PIN and
signing PIN. See "Access codes", p. 8.
Personalise your phone
Give your phone a personal touch with
ringing tones, display backgrounds, and
themes. Add shortcuts for your preferred
features, and attach enhancements.
Select Menu >Settings >Security and
from the following:
PIN code request or UPIN code
request — to request for your PIN or UPIN
code every time the phone is switched on.
Some SIM cards do not allow the code
request to be turned off.
Profiles
Your phone has various setting groups
called profiles, which you can customise
with ringing tones for different events
and environments.
PIN2 code request — to select whether
the PIN2 code is required when using a
specific phone feature which is protected
by the PIN2 code. Some SIM cards do not
allow the code request to be turned off.
Select Menu >Settings >Profiles, the
desired profile, and from the following
options:
Call barring service — to restrict
incoming calls to and outgoing calls from
your phone (network service). A barring
password is required.
Activate — to activate the selected
profile
Personalise — to change the profile
settings
Fixed dialling — to restrict your
outgoing calls to selected phone numbers
if supported by your SIM card. When the
fixed dialling is on, GPRS connections are
not possible except while sending text
messages over a GPRS connection. In this
case, the recipient’s phone number and
the message centre number must be
included in the fixed dialling list.
Timed — to set the profile to be active for
a certain time. When the time set for the
profile expires, the previous profile that
was not timed becomes active.
Themes
A theme contains elements for
personalising your phone.
Closed user group — to specify a group
of people whom you can call and who can Select Menu >Settings >Themes and
call you (network service)
from the following options:
Access codes — to change the security
code, PIN code, UPIN code, PIN2 code, or
barring password
Select theme — Open the Themes
folder, and select a theme.
Theme downloads — Open a list of links
Code in use — to select whether the PIN
to download more themes.
code or UPIN code should be active
Tones
Authority certificates or User
You can change the tone settings of the
selected active profile.
certificates — to view the list of the
authority or user certificates downloaded
Make it your phone 13
Select Menu >Settings >Tones. You can
find the same settings in the Profiles
menu.
Left and right selection keys
To change the functionassigned to the left
or right selection key, select Menu >
Settings >My shortcuts >Left
selection key or Right selection key and
the function.
Display
Select Menu >Settings >Display and
from the following:
In the standby mode, if the left selection
key is Go to, to activate a function, select
Go to >Options and from the following:
Wallpaper — to add a background image
for the home screen mode
Select options — to add or remove a
Active standby — to activate, organise,
function
and personalise the home screen mode
Organise — to rearrange the functions
Standby font colour — to select the font
colour for the home screen mode
Other shortcuts
Navigation key icons — to display the
scroll key icons in the home screen mode
Select Menu >Settings >My shortcuts
and from the following options:
Notification details — to display details
in missed call and message notifications
Navigation key — to assign other
functions from a predefined list to the
navigation key (scroll key).
Transition effects — to activate a
smoother and more organic navigation
experience
Active standby key — to select the
movement of the navigation key to
activate the active standby mode
Slide animation — to display an
animation when you open or close the
slide
Assign dialling shortcuts
Power saver — to dim the display
automatically, and to display a clock when
the phone is not used for a certain length
of time
Create shortcuts by assigning phone
numbers to the number keys 3-9.
1
2
Select Menu >Contacts >Speed
Sleep mode — to switch off the display
automatically when the phone is not used
for a certain length of time
dials, and scroll to a number key.
Select Assign, or, if a number has
already been assigned to the key,
select Options >Change.
Font size — to set the font size for
messaging, contacts, and web pages
3
Enter a number or search for a
contact.
Operator logo — to display the operator
logo
Cell info display — to display the cell
Voice commands
identity, if available from the network
Call contacts and use your phone by
speaking a voice command.
My shortcuts
With personal shortcuts, you get quick
access to frequently used functions of
your phone.
Voice commands are language-
dependent.
14 Make it your phone
To set the language, select Menu >
Settings >Phone >Language
settings >Recognition lang. and your
language.
To train the voice recognition to your
voice, select Menu >Settings >
Phone >Voice recognition >Voice
recog. training.
This device is compliant with Bluetooth
Specification 2.0 + EDR supporting the
following profiles: generic access,
network access, generic object exchange,
advanced audio distribution, audio video
remote control, handsfree, headset,
object push, file transfer, dial-up
networking, service discovery application,
SIM access, and serial port. To ensure
interoperability between other devices
supporting Bluetooth technology, use
Nokia approved accessories for this
model. Check with the manufacturers of
other devices to determine their
To activate a voice command for a
function, select Menu >Settings >
Phone >Voice recognition >Voice
commands, a feature, and the function.
indicates that the voice command is
compatibility with this device.
Features using Bluetooth technology
increase the demand on battery power
and reduce the battery life.
activated.
To activate the voice command, select
Add.
To play the activated voice command,
Set up a Bluetooth connection
select Play.
Select Menu >Settings >
Connectivity >Bluetooth and take the
following steps:
To use voice commands, see "Voice
1
Select My phone's name and enter a
To manage the voice commands, scroll to
a function, select Options and from the
following:
name for your phone.
2
To activate Bluetooth connectivity
select Bluetooth >On.
indicates
Edit or Remove — to rename or
that Bluetooth is active.
deactivate the voice command
3
4
To connect your phone with an audio
enhancement, select Connect audio
enhan. and the device that you want
to connect to.
Add all or Remove all — to activate or
deactivate voice commands for all
functions in the voice commands list
To pair your phone with any
Connect
Bluetooth device in range, select
Paired devices >Add new device.
Your phone provides several features to
connect to other devices to transmit and
receive data.
Scroll to a found device, and select
Add.
Bluetooth wireless technology
Enter a passcode (up to 16 characters)
on your phone and allow the
connection on the other Bluetooth
device.
Bluetooth technology allows you to
connect your phone, using radio waves, to
a compatible Bluetooth device within 10
metres (32 feet).
If you are concerned about security, turn
off the Bluetooth function, or set My
Make it your phone 15
phone's visibility to Hidden. Accept
Bluetooth communication only from
those you trust.
To activate the phone for data transfer or
image printing, connect the data cable
and select the mode:
PC Suite — to use the cable for Nokia PC
PC connection to the internet
Suite
Use Bluetooth technology to connect your
compatible PC to the internet without PC
Suite software. Your phone must have
activated a service provider that supports
internet access, and your PC hasto support
Bluetooth personal area network (PAN).
After connecting to the network access
point (NAP) service of the phone, and
pairing with your PC, your phone
Printing & media — to use the phone
with a PictBridge compatible printer or
with a compatible PC
Data storage — to connect to a PC that
does not have Nokia software and use the
phone as data storage
To change the USB mode, select Menu >
Settings >Connectivity >USB data
cable and the desired USB mode.
automatically opens a packet data
connection to the internet.
Synchronisation and backup
Packet data
Select Menu >Settings >Sync and
General packet radio service (GPRS) is a
network service that allows mobile
phones to send and receive data over an
internet protocol (IP)-based network.
backup and from the following:
Phone switch — Synchronise or copy
selected data between your phone and
another phone using Bluetooth
technology.
To define how to use the service, select
Menu >Settings >Connectivity >
Packet data >Packet data conn. and
from the following options:
Create backup — Create a backup of
selected data to the memory card or to an
external device.
When needed — to set the packet data
connection to established when required
by an application. The connection will be
cut when the application is closed.
Restore backup — Select a backup file
stored on the memory card or on an
external device and restore it to the
phone. Select Options >Details for
information about the selected backup
file.
Always online — to automatically
connect to a packet data network when
you switch the phone on
Data transfer — Synchronise or copy
selected data between your phone and
another device, PC, or network server
(network service).
You can use your phone as a modem by
connecting it to a compatible PC using
Bluetooth technology or a USB data cable.
For details, see Nokia PC Suite
documentation. See "Nokia
Connect a USB device
You can connect a USB storage (for
example, a memory stick) to your device
and browse in the file system and transfer
files.
USB data cable
You can use the USB data cable to transfer
data between the phone and a compatible
PC or a printer supporting PictBridge.
16 Make it your phone
1
2
3
Connect a compatible adapter cable to
the USB port of your device.
Service commands
Service commands allow you to write and
send service requests (USSD commands)
to your serviceprovider, suchasactivation
commands for network services.
Connect the USB storage to the
adapter cable.
Select Menu >Gallery and the USB
device to browse.
To write and send the service request,
select Menu >Messaging >Serv.
commands. For details, contact your
service provider.
Note: Not all USB storage devices are
supported, depending on their power
consumption.
SIM messages
Network provider services
SIM messages are specific text messages
that are saved to your SIM card. You can
copy or move those messages from the
SIM to the phone memory, but not vice
versa.
Your network provider provides several
additional services you may want to use.
For some of these services, charges may
apply.
Operator menu
To read SIM messages, select Menu >
Access a portal to services provided by
your network operator. For more
information, contact your network
operator. The operator can update this
menu with a service message.
Messaging >Options >SIM messages.
Configuration
You can configure your device with
settings that are required for certain
services. You may receive these settings as
a configuration message from your
service provider.
SIM services
Your SIM card may provide additional
services. You can access this menu only if
it is supported by your SIM card. The name
and contents of the menu depend on the
available services.
Select Menu >Settings >
Configuration and from the following:
Default config. sett. — View the service
providers saved in the device, and set a
default service provider.
Accessing these services may involve
sending messages or making a phone call
for which you may be charged.
Act. def. in all apps. — Activate the
default configuration settings for
supported applications.
Info messages, SIM messages, and
service commands
Preferred access pt. — View saved
access points.
Info messages
Device manager sett. — Allow or
prevent the device from receiving
software updates. This option may not be
available, depending on your device.
You can receive messages on various
topics from your service provider
(network service). For more information,
contact your service provider.
Personal config. sett. — Add new
personal accounts for various services
manually, and activate or delete them. To
add a new personal account, select Add,
Select Menu >Messaging >Info
messages and from the available options.
Stay in touch 17
Reject an incoming call
or Options >Add new. Select the service
type, and enter the required details. To
activate a personal account, select
Options >Activate.
Press the end key.
Adjust the volume in a call
Scroll left or right.
Stay in touch
Make calls
Make a video call
Make a voice call
In a video call, the video recorded with the
front camera on your phone is shown to
the video call recipient. To make a video
call, you must have a USIM card and be
connected to a WCDMA network. For
availability and subscription to video call
services, contact your service provider.
The video call can be made to a
You can start a call in several ways:
Manual dialling
Enter the phone number, including the
area code, and press the call key.
For international calls, press * twice for
the international prefix (the + character
replaces the international access code),
enter the country code, the area code
without the leading 0, if necessary, and
the phone number.
compatible phone or an ISDN client
between two parties. Video calls cannot
be made while another voice, video, or
data call is active.
1
To start a video call, enter the phone
Repeat a call
number, including the area code.
To access the list of dialled numbers, press
the call key once in the standby mode.
Select a number or name, and press the
call key.
2
Press and hold the call key, or select
Options >Video call.
Starting a video call may take a while.
If the call is not successful, you are
asked to try a voice call or send a
message instead.
Select a number from Contacts
Search for a name or phone number that
you saved in Contacts.
3
To end the call, press the end key.
Dialling shortcuts
Select Menu >Settings >Call >Slide
call handling to handle calls with the
slide.
Assign a phone number to one of the
number keys, 3-9.See "Assign dialling
Answer an incoming call
Use a dialling shortcut to make a call in
Press the call key, or open the slide.
one of the following ways:
End a call
•
•
Press a number key, then the call key.
Press the end key, or close the slide.
If Menu >Settings >Call >Speed
dialling >On is selected, press and
hold a number key.
Mute the ringing tone
Select Silence.
18 Stay in touch
Voice dialling
Voice messages
Make a phone call by saying the name that The voice mailbox is a network service to
is saved in Contacts.
which you may need to subscribe. For
more information, contact your service
provider.
As voice commands are language-
dependent, before voice dialling, you
must select Menu >Settings >Phone >
Language settings >Recognition
lang. and your language.
Call your voice mailbox
Press and hold 1.
Edit your voice mailbox number
Note: Using voice tags may be difficult in
Select Menu >Messaging >Voice
a noisy environment or during an
messages >Voice mailbox no..
emergency, so you should not rely solely
upon voice dialling in all circumstances.
Video messages
1
In the standby mode, press and hold
the right selection key. A short tone
sounds, and Speak now is displayed.
The video mailbox is a network service to
which you may need to subscribe. For
more information, contact your service
provider.
2
Say the name of the contact you want
to dial. If the voice recognition is
successful, a list with matches is
shown. The phone plays the voice
command of the first match on the
list. If it is not the correct command,
scroll to another entry.
Call your video mailbox
Press and hold 2.
Edit your video mailbox number
Select Menu >Messaging >Video
messages >Voice mailbox no..
Options during a call
Many of the options that you can use
during a call are network services. For
availability, contact your service provider.
Call log
To view the information on your calls,
messages, data, and synchronisation,
select Menu >Log and from the available
options.
During a call, select Options and from the
available options.
Some of the network options are Hold,
New call, Add to conference, End all
calls, and the following:
Note: The actual invoice for calls and
services from your service provider may
vary, depending on network features,
rounding off for billing, taxes, and so
forth.
Send DTMF — to send tone strings
Swap — to switch between the active call
and the call on hold
Call settings
Transfer — to connect a call on hold to
Select Menu >Settings >Call and from
an active call and disconnect yourself
the following:
Conference — to make a conference call
Call divert — to forward your incoming
Private call — to have a private
calls (network service). You may not be
discussion in a conference call
Stay in touch 19
Write text
able to forward your calls if some call
barring functions are active.
Text modes
Anykey answer — to answer an
incoming call by briefly pressing any key,
except the power key, the left and right
selection keys, or the end key
To enter text (for example, when writing
messages) you can use traditional or
predictive text input.
When you write text, press and hold
Automatic redial — to automatically
redial the number if a call fails. The phone
tries to call the number 10 times.
Options to switch between traditional
text input, indicated by
, and
predictive text input, indicated by
Not all languages are supported by
predictive text input.
.
Video-voice redial — the phone
automatically repeats a voice call to the
same number to which a video call has
failed
The character cases are indicated by
,
Voice clarity — to enhance speech
intelligibility, especially in noisy
environments
, and
.
To change the character case, press #. To
Speed dialling — to dial the names and
phone numbers assigned to the number
keys (2 to 9) by pressing and holding the
corresponding number key
change from the letter to number mode,
indicated by
, press and hold #, and
select Number mode. To change from the
number to the letter mode, press and hold
#.
Call waiting — to have the network
notify you of an incoming call while you
have a call in progress (network service)
To set the writing language, select
Options >Writing language.
Summary after call — to briefly display
the approximate duration after each call
Traditional text input
Send my caller ID — to show your phone
number to the person you are calling
(network service). To use the setting
agreed upon with your service provider,
select Set by network.
Press a number key, 2-9, repeatedly until
the desired character appears. The
available characters depend on the
selected writing language.
Slide call handling — to set the phone
to answer calls when you open the slide
and to end calls when you close the slide
If the next letter you want is located on
the same keyasthepresent one, wait until
the cursor appears, and enter the letter.
To access the most common punctuation
marks and special characters, press 1
repeatedly. To access the list of special
characters, press *. To insert a space, press
0.
Outgoing call line — to select the phone
line for making calls, if your SIM card
supports multiple phone lines (network
service)
Video sharing — to define video sharing
settings
Predictive text input
Text and messages
Predictive text input is based on a built-in
dictionary to which you can also add new
words.
Write text, and create messages, e-mail,
and notes.
20 Stay in touch
1
2
Start writing a word, using the keys
2 to 9. Press each key only once for
one letter.
Before you can send any text or SMS e-mail
messages, you must save your message
centre number. Select Menu >
Messaging >Message settings >Text
messages >Message centres >Add
centre, enter a name, and the number
from the service provider.
To confirm a word, scroll right or add
a space.
•
•
If the word is not correct, press *
repeatedly, and select the word
from the list.
Multimedia messages
If the ? character is displayed after
the word, the word you intended
to write is not in the dictionary.
To add the word to the dictionary,
select Spell. Enter the word using
traditional text input, and select
Save.
A multimedia message can contain text,
pictures, and sound or video clips.
Only devices that have compatible
features can receive and display
multimedia messages. The appearance of
a message may vary depending on the
receiving device.
The wireless network may limit the size of
MMS messages. If the inserted picture
exceeds this limit, the device may make it
smaller so that it can be sent by MMS.
Important: Exercise caution when
opening messages. Messages may contain
malicious software or otherwise be
harmful to your device or PC.
For availability and subscription to the
multimedia messaging service (MMS),
contact your service provider. You may
also download the configuration settings.
•
To write compound words, enter
the first part of the word, and
scroll right to confirm it. Write the
last part of the word, and confirm
the word.
3
Start writing the next word.
Text and multimedia messages
You can create a message and optionally
attach, for example, a picture. Your phone
automatically changes a text message to
a multimedia message when a file is
attached.
Text messages
Your device supports text messages
beyond the limit for a single message.
Longer messages are sent as two or more
messages. Your service provider may
charge accordingly. Characters with
accents, other marks, or some language
options take more space, and limit the
number of characters that can be sent in
a single message.
Create a text or multimedia message
1
2
Select Menu >Messaging >Create
message >Message.
To add recipients, scroll to the To:
field, and enter the recipient’s
number or e-mail address, or select
Add to select recipients from the
available options. Select Options to
add recipients and subjects and to set
sending options.
An indicator at the top of the display
shows the total number of characters left
and the number of messages needed for
sending.
3
Scroll to the Text: field, and enter the
message text.
Stay in touch 21
4
5
To attach content to the message,
scroll to the attachment bar at the
bottom of the display and select the
desired type of content.
To save the sent messages in the Sent
items folder, select Menu >
Messaging >Message settings >
General settings >Save sent
messages.
The phone saves received messages in the
Inbox folder. Organise your messages in
the Saved items folder.
To send the message, press Send.
The message type is indicated at the top
of the display and changes automatically
depending on the content of the message.
To add, rename, or delete a folder, select
Menu >Messaging >Saved items >
Options.
Service providers may charge differently
depending on the message type. Check
with your service provider for details.
E-mail
Read a message and reply
Access your POP3 or IMAP4 e-mail account
with your phone to read, write, and send
e-mail. This e-mail application is different
from the SMS e-mail function.
Important: Exercise caution when
opening messages. Messages may contain
malicious software or otherwise be
harmful to your device or PC.
Before you can use e-mail, you must have
ane-mail account and thecorrectsettings.
For availability and the correct settings,
contact your e-mail service provider. You
may receive the e-mail configuration
settings as a configuration message. See
Your phone issues a notification when you
receive a message. Select View to display
the message. If more than one message
was received, to display a message, select
the message from the Inbox and Open.
Use the scroll key to view all parts of the
message.
E-mail setup wizard
To create an answer message, select
Reply.
The e-mail setup wizard starts
automatically if no e-mail settings are
defined in the phone. To start the setup
wizard for an additional e-mail account,
select Menu >Messaging and the
existing e-mail account. Select Options >
Add mailbox to start the e-mail setup
wizard. Follow the instructions on the
display.
Send and organise messages
To send a message, select Send. The
phone saves the message in the Outbox
folder, and the sending starts.
Note: The message sent icon or text on
your device screen does not indicate that
the message is received at the intended
destination.
If message sending is interrupted, the
phone tries to resend the message a few
times. If these attempts fail, the message
remains in the Outbox folder. To cancel
message sending, in the Outbox folder,
select Options >Cancel sending.
Write and send an e-mail
You may write your e-mail before
connecting to the e-mail service.
1
2
Select Menu >Messaging >Create
message >E-mail message.
Enter the recipient’s e-mail address,
the subject, and the e-mail message.
22 Stay in touch
To attach a file, select Options >
Automatic retrieval — to retrieve
new e-mail automatically from your
e-mail account
Insert and from the available options.
3
4
If more than one e-mail account is
defined, select the account from
which you want to send the e-mail.
3
To enable the new e-mail notification,
select Menu >Messaging >
Message settings >E-mail
messages >New e-mail notif. >
On.
To send the e-mail, select Send.
Read an e-mail and reply
Important: Exercise caution when
opening messages. Messages may contain
malicious software or otherwise be
harmful to your device or PC.
Flash messages
Flash messages are text messages that are
instantly displayed upon reception.
1
2
To write a flash message, select
Menu >Messaging >Create
message >Flash message.
1
2
3
4
To download e-mail message
headers, select Menu >Messaging
and your e-mail account.
Enter the recipient’s phone number,
write your message (maximum 70
characters), and select Send.
To download an e-mail and its
attachments, select the e-mail and
Open or Retrieve.
To reply to or forward the e-mail,
select Options and from the available
options.
Instant messaging
With instant messaging (IM, network
service) you can send short text messages
to online users. You must subscribe to a
service and register with the IM service
you want to use. Check the availability of
this service, pricing, and instructions with
your service provider. The menus may
vary depending on your IM provider.
To disconnect from your e-mail
account, select Options >
Disconnect. The connection to the e-
mail account automatically ends after
some time without activity.
New e-mail notifications
To connect to the service, select Menu >
Messaging >IMs and follow the
instructions on the display.
Your phone can automatically check your
e-mail account in time intervals and issue
a notification when new e-mail is
received.
Nokia Xpress audio messages
1
Select Menu >Messaging >
Message settings >E-mail
messages >Edit mailboxes.
Create and send an audio message using
MMS in a convenient way.
1
Select Menu >Messaging >Create
message >Audio message. The
voice recorder opens.
2
Select your e-mail account,
Downloading sett., and the
following options:
2
3
Record your message. See "Voice
Mailbox upd. interval — to set how
often your phone checks your e-mail
account for new e-mail
Enter one or more phone numbers in
the To: field, or select Add to retrieve
a number.
Image and video 23
Capture an image
4
To send the message, select Send.
Select Capture. The phone saves the
images on the memory card, if available,
or in the phone memory.
Message settings
Select Menu >Messaging >Message
settings and from the following:
Select Options >Flash >Flash on to
capture all images with camera flash, or
Automatic to activate the flash
automatically when the light conditions
are dim.
Keep a safe distance when using the flash.
Do not use the flash on people or animals
at close range. Do not cover the flash while
taking a picture.
To display an image immediately after
you take it, select Options >Settings >
Image preview time and the preview
time. During the preview time, select
Back to capture another image, or Send
to send the image as a multimedia
message.
General settings — to save copies of sent
messages in your phone, to overwrite old
messages if the message memory
becomes full, and to set up other
preferences related to messages
Text messages — to allow delivery
reports, to set up message centres for SMS
and SMS e-mail, to select the type of
character support, and to set up other
preferences related to text messages
Multimedia messages — to allow
delivery reports, to set up the appearance
of multimedia messages, to allow the
reception of multimedia messages and
advertisements, and to set up other
preferences related to multimedia
messages
E-mail messages — to allow e-mail
reception, to set the image size in e-mail,
and to set up other preferences related to
e-mail
Your device supports an image capture
resolution of 1944x2592 pixels.
Record a video clip
Service messages — to activate service
messages and to set up preferences
related to service messages
Activate video function
Select Menu >Media >Video, or, if the
camera function is on, scroll left or right.
Image and video
Capture an image
Video recording
To start recording, selectRecord; to pause
recording, select Pause; to resume
recording, select Continue; to stop
recording, select Stop.
Activate the still camera
Select Menu >Media >Camera; or, if the
video function is on, scroll left or right.
Zooming
The phone saves the video clips on the
memory card, if available, or in the phone
memory.
In the camera mode, scroll up and down.
Camera and video options
In the camera or video mode, select
Options and from the following:
24 Image and video
Effects — Apply different effects (for
example, greyscale and false colour) to
the captured image.
Format the memory card
Some supplied memory cards are
preformatted; others require formatting.
When you format a memory card, all data
on the card is permanently lost.
White balance — Adapt the camera to
the current light conditions.
1
To format a memory card, select
Settings — Change other camera and
video settings, and select the image and
video storage.
Menu >Gallery or Applications, the
memory card folder
, and
Options >Format mem. card >
Gallery
Yes.
Manage images, video clips, music files,
themes, graphics, tones, recordings, and
received files. These files are stored in the
phone memory or an attached memory
card and may be arranged in folders.
2
When formatting is complete, enter a
name for the memory card.
Lock the memory card
To set a password (maximum 8
characters) to lock your memory card
Your phone supports an activation key
system to protect acquired content.
Always check the delivery terms of any
content and activation key before
acquiring them, because they may be
subject to a fee.
against unauthorised use, select the
memory card folder
and Options >
Set password.
The password is stored in your phone, and
you do not have to enter it again while you
are using the memory card on the same
phone. If you want to use the memory
card on another device, you are asked for
the password.
Folders and files
To view the list of folders, select Menu >
Gallery.
To view the list of files in a folder, select a
To remove the password, select
folder and Open.
Options >Delete password.
To view the folders of the memory card
when moving a file, scroll to the memory
card, and press the scroll key right.
Check memory consumption
To check the memory consumption of
different data groups and the available
memory to install new software on your
memory card, select the memory card
Memory card
Use a memory card to store your
multimedia files, such as video clips,
music tracks, sound files, images, and
messaging data.
and Options >Details.
Print images
Your phone supports Nokia XpressPrint to
Some of the folders in Gallery with
content that the phone uses (for example,
Themes) may be stored on the memory
card.
print images that are in the JPEG format.
1
Connect your phone with a USB data
cable to a compatible printer.
Entertainment 25
2
Select the image you want to print
Music menu
and Options >Print.
Access your music and video files stored in
the phone or on the memory card,
Share images and videos online
download songs or video clips from the
web, or view compatible video streams
from a network server (network service).
Share images and video clips in
compatible online sharing services on the
web.
To listen to music or play a video clip,
To use online sharing, you must subscribe
select a file from a folder and Play.
to an online sharing service.
To download files from the web, select
Options >Downloads and a download
site.
To update the music library after you have
added songs, select Options >Update
library.
To upload an image or a video clip to an
online sharing service, select the file from
Gallery and Options >Send >Upload to
web.
For more information on online sharing
and compatible service providers, see the
Nokia product support pages or your local
Nokia website.
Create a playlist
To create a playlist with your selection of
music:
Entertainment
Listen to music
1
2
3
Select Playlists >Create playlist,
and enter the name of the playlist.
Listen to music with the music player or
radio, and record sounds or voice with the
voice recorder. Download music from the
internet, or transfer music from your PC.
Add songs or video clips from the
displayed lists.
Select Done to store the playlist.
Configure a streaming service
Music player
You may receive the streaming settings as
a configuration message from the service
provider.See "Configuration setting
service", p. 35. You can also enter the
settings manually. See
Your phone includes a music player for
listening to songs or other MP3 or AAC
sound files that you have downloaded
from the web or transferred to the phone
with Nokia PC Suite. See "Nokia PC
Suite", p. 32. You can also view your
To activate the settings:
recorded or downloaded video clips.
1
Select Options >Downloads >
Streaming settings >
Configuration.
Music and video files stored in the music
folder in the phone memory or on the
memory card are automatically detected
and added to the music library.
2
3
Select a service provider, Default, or
Personal config. for streaming.
To open the music player, select Menu >
Select Account and a streaming
service account from the active
configuration settings.
Media >Music player.
26 Entertainment
Play songs
To adjust the volume, select Options >
Volume.
Operate the music player with the virtual
keys on the display.
To use the graphical keys
on the display, scroll up, down, left, or
right.
,
,
, or
Start playing
Select
.
Tune radio stations
Pause playing
Select
.
1
To start the search, select and hold
or . To change the radio
Adjust the volume
frequency in 0.05 MHz steps, briefly
Press the scroll key up or down.
select
or
.
2
3
To save a station to a memory
location, select Options >Save
station.
Skip to the next song
Select
.
To enter the name of the radio
station, select Options >Stations >
Options >Rename.
Skip to the beginning of the previous
song
Select
twice
Select Options and from the following:
Fast-forward
Search all stations — to automatically
search for the available stations at your
location
Select and hold
.
Rewind
Select and hold
.
Set frequency — to enter the frequency
of the desired radio station
Close the music player menu
Stations — to list and rename or delete
Press the end key. The music continues
saved stations
playing.
To change stations, select
or , or
Stop the music player
press the number keys corresponding to
the number of the station in the station
list.
Press and hold the end key.
Change the music player look
Radio settings
Your phone provides several themes to
Select Options >Settings and from the
change the look of the music player.
following:
Select Menu >Media >Music player >
Go to Music player >Options >
RDS enabled — Display information from
the radio data system (RDS).
Settings >Music player theme and one
of the listed themes. The virtual keys may
change depending on the theme.
Auto-freq. change on — Enable the
automatic switch to a frequency with the
best reception of the tuned in station
(available when RDS is activated).
Radio
Select Menu >Media >Radio.
Entertainment 27
Stereo output or Mono
output — Activate the stereo or mono
output.
beeping. To pause the recording,
select
.
2
To end the recording, select
. The
Radio theme — Select a radio theme.
recording is saved in the Recordings
folder in Gallery.
Equaliser
Select Options to play or send the last
recording, to access the list of recordings,
or to select the memory and the folder to
store the recordings.
Adjust the sound when using the music
player.
Select Menu >Media >Equaliser.
To activate a predefined equaliser set,
scroll to one of the sets, and select
Activate.
Web
You can access various internet services
withyour phone browser. The appearance
of the internet pages may vary due to
screen size. You may not be able to see all
the details on the internet pages.
Create a new equaliser set
1
2
Select one of the last two sets in the
list and Options >Edit.
Important: Use only services that you
trust and that offer adequate security and
protection against harmful software.
For the availability of these services,
pricing, and instructions, contact your
service provider.
You may receive the configuration
settings required for browsing as a
configuration message from your service
provider.
Scroll left or right to access the virtual
sliders and up or down to adjust the
slider.
3
To save the settings and create a
name for the set, select Save and
Options >Rename.
Stereo widening
Stereo widening creates a wider stereo
sound effect when you are using a stereo
headset.
To activate, select Menu >Media >
To set up the service, select Menu >
Web >Web settings >Configuration
sett., a configuration, and an account.
Stereo widening.
Voice recorder
Connect to a service
Record speech, sound, or an active call,
and save them in Gallery.
Connect to the web service
Select Menu >Media >Voice recorder.
Select Menu >Web >Home; or in the
standby mode, press and hold 0.
To use the graphical keys
,
, or
on the display, scroll left or right.
Show list of bookmarks
Select Menu >Web >Bookmarks.
Record sound
1
Select
, or, during a call, select
Connect to the web address used the
Options >Record. While recording a
last time
call, all parties to the call hear a faint
Select Menu >Web >Last web addr..
28 Entertainment
Options >Settings >Security >
Enter a web address and connect to it
Cookies.
Select Menu >Web >Go to address.
Enter the address, and select OK.
Browser security
Security features may be required for
some services, such as banking services or
online shopping. For such connections
you need security certificates and possibly
a security module which may be available
on your SIM card. For more information,
contact your service provider.
To view or change the security module
settings, or to view a list of authority or
user certificates downloaded to your
phone, select Menu >Settings >
Security >Security module sett.,
Authority certificates, or User
certificates.
After you make a connection to the
service, you can start browsing its pages.
The function of the phone keys may vary
in different services. Follow the text
guides on the phone display. For more
information, contact your service
provider.
Appearance settings
While browsing the web, select
Options >Settings and from the
following:
Display — Select the font size, whether
images are shown, and how the text is
displayed.
Important: Even if the use of certificates
makes the risks involved in remote
connections and software installation
considerably smaller, they must be used
correctly in order to benefit from
General — Select whether web addresses
are sent as Unicode (UTF-8), the encoding
type for the contents, and whether
JavaScript™ is enabled.
increased security. The existence of a
certificate does not offer any protection
by itself; the certificate manager must
contain correct, authentic, or trusted
certificates for increased security to be
available. Certificates have a restricted
lifetime. If "Expired certificate" or
"Certificate not valid yet" is shown, even if
the certificate should be valid, check that
the current date and time in your device
are correct.
The available options may vary.
Cache memory
A cache is a memory location that is used
to store data temporarily. If you have tried
to access or have accessed confidential
information requiring passwords, empty
the cache after each use. The information
or services you have accessed are stored
in the cache.
A cookie is data that a site saves in the
cache memory of your phone. Cookies are
saved until you clear the cache memory.
Games and applications
You can manage applications and games.
Your phone may have some games or
applications installed. These files are
stored in the phone memory or an
attached memory card and may be
arranged in folders.
1
To clear the cache while browsing,
select Options >Tools >Clear the
cache.
2
To allow or prevent the phone from
receiving cookies, select Menu >
Web >Web settings >Security >
Cookies; or, while browsing, select
Maps 29
Launch an application
For the availability of different services
and pricing, contact your service provider.
Select Menu >Applications >Games,
Memory card, or Collection. Scroll to a
game or an application, and select Open.
Maps
To set sounds, lights, and shakes for a
game, select Menu >Applications >
Options >Application settings.
You can browse maps for different cities
and countries, search for addresses and
points of interest, plan routes from one
location to another, save locations as
landmarks, and send them to compatible
devices.
Other available options may include the
following:
Update version — to verify that a new
version of the application is available for
download from the web (network service)
Almost all digital cartography is
inaccurate and incomplete to some
extent. Never rely solely on the
cartography that you download for use in
this device.
To use the Maps application, select
Menu >Maps and from the available
options.
Web page — to provide further
information or additional data for the
application from an internet page
(network service), if available
Application access — to restrict the
application from accessing the network
For detailed information about Maps, see
Download an application
Your phone supports J2ME Java
applications. Ensure that the application
is compatible with your phone before
downloading it.
Download maps
Your phone may contain pre-installed
maps on the memory card. You can
download a new set of maps through the
internet using the Nokia Map Loader PC
software.
Important: Only install and use
applications and other software from
trusted sources, such as applications that
are Symbian Signed or have passed the
Java Verified™ testing.
Nokia Map Loader
To download the Nokia Map Loader on
your PC and for further instructions, see
You can download new applications and
games in different ways.
Before you download new maps for the
first time, ensure that you have a memory
card inserted in the phone.
•
•
Select Menu >Applications >
Options >Downloads >App.
downloads or Game downloads;
the list of available bookmarks is
shown.
Select Menu >Organiser >Maps to do
an initial configuration.
Use the Nokia Application Installer
from PC Suite to download the
applications to your phone.
To change the selection of maps on your
memory card, use the Nokia Map Loader
to delete all maps on the memory card and
30 Organise
Extra services
download a new selection, to ensure that
all maps are from the same release.
You can upgrade Maps with a full voice-
guided navigation, which requires a
regional licence. To use this service, you
need a compatible external GPS device
that supports Bluetooth wireless
technology.
Network map service
You can set your phone to automatically
download maps that you do not have in
your phone when needed.
Select Menu >Organiser >Maps >
Settings >Network settings >Allow
network usage >Yes or In home
network.
To purchase a navigation service with
voice guidance, select Menu >
Organiser >Maps >Extra services >
Purchase navigation, and follow the
instructions.
To use navigation with voice guidance,
you must allow the Maps application to
use a network connection.
To prevent automatic download of maps,
select No.
Note: Downloading content such as
maps, satellite images, voice files, guides
or traffic information may involve
transmission of large amounts of data
(network service).
The navigation licence is connected to
your SIM card. If you insert another SIM
card in your phone, you are asked to
purchase a licence when starting
navigation. During the purchase
Maps and GPS
procedure, you are offered to transfer the
existing navigation licence to the new SIM
card without extra charge.
You can use the global positioning system
(GPS) to support the Maps application.
Find out your location, or measure
distances and coordinates.
Organise
Before you can use the GPS function with
your phone, you must pair your phone
with a compatible external GPS receiver
using Bluetooth wireless technology. For
more information, see the user guide for
your GPS device.
After pairing the Bluetooth GPS device
with the phone, it may take several
minutes for the phone to display the
current location. Subsequent connections
should be faster, but if you have not used
GPS for several days, or are very far away
from the last place you used it, it may take
several minutes to detect and display your
location.
Let your phone help you to organise your
life.
Manage contacts
Save names, phone numbers, and
addresses as contacts in the phone and
SIM card memory.
Select Menu >Contacts.
Select the memory for contacts
The phone memory can save contactswith
additional details, such as various phone
numbers and text items. You can also save
an image, a tone, or a video clip for a
limited number of contacts.
The SIM card memory cansave nameswith
one phone number attached to them. The
Organise 31
Several contacts
contacts saved in the SIM card memory are
indicated by
.
Select Options >Mark.
1
Select Settings >Memory in use to
Mark the contacts, and select Options >
select the SIM card, the phone
Copy marked or Move marked.
memory, or both for your contacts.
All contacts
2
Select Phone and SIM to recall
contacts from both memories. When
you save contacts, they are saved in
the phone memory.
Select Menu >Contacts >Copy
contacts or Move contacts.
Create a contact group
Handle contacts
Arrange contacts into caller groups with
different ringing tones and group images.
Search for a contact
Menu >Contacts >Names
1
2
Select Menu >Contacts >Groups.
Scroll through the list of contacts, or enter
Select Add or Options >Add new
the first characters of the contact's name.
group to create a new group.
3
Enter the group name, optionally
select an image and a ringing tone,
and select Save.
Save a name and phone number
Names >Options >Add new contact
Add and edit details
4
Select the group and View >Add to
add contacts to the group.
Select a contact, Details >Options >
Add detail and from the available
options.
Business cards
You can send and receive a person’s
contact information from a compatible
device that supports the vCard standard.
Delete a detail
Select a contact and Details. Select a
detail and Options >Delete.
To send a business card, search for the
contact, and select Details >Options >
Send business card.
When you receive a business card, select
Show >Save to save the business card in
the phone memory.
Delete a contact
Select a contact and Options >Delete
contact.
Delete all contacts
Menu >Contacts >Del. all contacts >
From phone memory or From SIM card.
Date and time
To change the clock type, time, time zone,
or date, select Menu >Settings >Date
and time.
Copy or move contacts between the
phone and SIM card memory
Single contact
When travelling to a different time zone,
select Menu >Settings >Date and
time >Date & time settings >Time
zone:, and scroll left or right to select the
time zone of your location. The time and
Select the contact to copy or move and
Options >Copy contact or Move
contact.
32 Organise
date are set according to the time zone
and enable your phone to display the
correct sending time of received text or
multimedia messages.
For example, GMT -5 denotes the time
zone for New York (USA), 5 hours west of
Greenwich, London (UK).
Options >Settings >Auto-delete
notes and from the available options.
Make a calendar note
Scroll to the date, and select Options >
Make a note. Select the note type, and fill
in the fields.
To-do list
Alarm clock
To create a note for a task that you must
do, select Menu >Organiser >To-do
list.
To sound an alarm at a desired time.
Set the alarm
1
2
3
Select Menu >Organiser >Alarm
To create a note if no note is added, select
Add; otherwise, select Options >Add.
Fill in the fields, and select Save.
clock.
Set the alarm on, and enter the alarm
time.
To view a note, scroll to it, and select
To issue an alarm on selected days of
the week, select Repeat: >On and
the days.
View.
Notes
4
5
Select the alarm tone.
To write and send notes, select Menu >
Set the snooze time-out, and select
Organiser >Notes.
Save.
To make a note if no note is added, select
Add; otherwise, select Options >Make a
note. Write the note, and select Save.
Stop the alarm
To stop the sounding alarm, select Stop.
If you let the alarm sound for a minute or
select Snooze, the alarm stops for the
snooze time-out, then resumes.
Nokia PC Suite
With Nokia PC Suite, you can manage your
music and synchronise contacts, calendar
entries, notes, and to-do notes between
your device and a compatible PC or a
remote internet server (network service).
For more information, and to downloadPC
Calendar
Select Menu >Organiser >Calendar.
The current day is framed. If there are any
notes set for the day, the day is in bold
type. To view the day notes, select View.
To view a week, select Options >Week
view. To delete all notes in the calendar,
select Options >Delete notes >All
notes.
To edit settings related to date and time,
select Options >Settings and from the
available options. To delete old notes
automatically after a specified time, select
Calculator
Your phone provides a standard, a
scientific, and a loan calculator.
Select Menu >Organiser >Calculator
and, from the available options, the
calculator type and the operating
instructions.
Support and updates 33
This calculator has limited accuracy and is View times or Delete times — to view or
designed for simple calculations.
delete the saved times
To set the stopwatch timing in the
Countdown timer
Normal timer
background, press the end key.
1
To activate the timer, select Menu >
Organiser >Countd. timer >
Normal timer, enter a time, and
write a note that is displayed when
the time expires. To change the time,
select Change time.
Support and updates
Nokia helps you in many ways to gain the
most benefit from your phone.
Helpful hints
2
3
To start the timer, select Start.
If you have queries about your phone, or
you are unsure how your phone should
function, see the user guide. If this does
not help, try the following:
To stop the timer, select Stop timer.
Interval timer
1
To have an interval timer with up to
10 intervals started, first enter the
intervals.
Reset the phone
Switch off the phone, and remove the
2
3
Select Menu >Organiser >Countd.
battery.
timer >Interval timer.
After a few seconds, insert the battery,
and switch on the phone.
To start the timer, select Start
timer >Start.
Restore the factory settings
To select how the interval timer should
start the next period, select Menu >
Organiser >Countd. timer >
Update your phone software
Settings >Contin. to next period and
from the available options.
Stopwatch
Get more information
You can measure time, take intermediate
times, or take lap times using the
stopwatch.
See a Nokia website, or contact Nokia
Select Menu >Organiser >Stopwatch
If a query remains unresolved, contact
your local Nokia Care point for repair
options. Before sending your phone for
repair, always back up or make a record of
data in your phone.
and from the following options:
Split timing — to take intermediate
times. To reset the time without saving it,
select Options >Reset.
Lap timing — to take lap times
Nokia support
Continue — to view the timing that you
local Nokia website for the latest version
of this guide, additional information,
have set in the background
Show last — to view the most recently
measured time if the stopwatch is not
reset
34 Support and updates
downloads, and services related to your
Nokia product.
Important: Use only services that you
trust and that offer adequate security and
protection against harmful software.
Configuration settings service
For the availability of different services
Download free configuration settings
such as MMS, GPRS, e-mail, and other
services for your phone model at
and pricing, contact your service provider.
Software updates using your PC
Software updates may include new
features and enhanced functions that
were not available at the time of purchase
of your device. Updating the software may
also improve the device performance.
Nokia PC Suite
You may find PC Suite and related
information on the Nokia website at
Nokia Software Updater is a PC application
that enables you to update your device
software. To update your device software,
you need a compatible PC, broadband
internet access, and a compatible USB
data cable to connect your device to the
PC.
To get more information, to check the
release notes for the latest software
versions, and to download the Nokia
Software Updater application, see
www.nokia.com/softwareupdate or your
local Nokia website.
Nokia Care services
If you need to contact Nokia Care services,
check the list of local Nokia Care contact
centres at www.nokia.com/
Maintenance
For maintenance services, check your
nearest Nokia Care point at
To update the device software, do the
My Nokia
following:
Receive free tips, tricks, and support for
your Nokia phone, plus free trial content,
interactive demonstrations, a
1
2
Download and install the Nokia
Software Updater application to your
PC.
personalised web page, and news about
the latest Nokia products and services.
Connect your device to the PC using a
USB data cable, and open the Nokia
Software Updater application. The
Nokia Software Updater application
guides you to back up your files,
update the software, and restore your
files.
Get the most out of your Nokia phone and
register at My Nokia today! For more
information and availability in your
Download content
You may be able to download new content
(for example, themes) to your phone
(network service).
Software updates over the air
Your service provider may send phone
software updates over the air directly to
your phone (network service). This option
Support and updates 35
may not be available, depending on your
phone.
Downloading software updates may
involve the transmission of large amounts
of data (network service).
Make sure that the device battery has
enough power, or connect the charger
before starting the update.
The software update may take several
minutes. If there are problems with the
installation, contact your service provider.
Configuration setting service
To use some of the network services, such
as mobile internet services, the
multimedia messaging service (MMS),
Nokia Xpress audio messaging, or remote
internet server synchronisation, your
phone needs the correct configuration
settings. For more information on
Warning:
If you install a software update, you
cannot use the device, even to make
emergency calls, until the installation is
completed and the device is restarted. Be
sure to back up data before accepting
installation of an update.
availability, contact your service provider
or the nearest authorised Nokia dealer, or
see the support pages on the Nokia
website. See "Nokia support", p. 33.
When you have received the settings as a
configuration message and the settings
are not automatically saved and activated,
Configuration settings received is
displayed.
Software update settings
This option may not be available,
depending on your phone.
To save the settings, select Show >
Save. If required, enter the PIN code
supplied by the service provider.
To allow or disallow software and
configuration updates, select Menu >
Settings >Configuration >Device
manager sett. >Serv. softw. updates.
Restore factory settings
Request a software update
To restore the phone back to factory
conditions, select Menu >Settings >
Rest. factory sett. and from the
following:
1
2
3
4
Select Menu >Settings >Phone >
Phone updates to request available
software updates from your service
provider.
Restore settings only — Reset all
preference settings without deleting any
personal data.
Select Current softw. details to
display the current software version
and check whether an update is
needed.
Restore all — Reset all preference
settings and delete all personal data, such
as contacts, messages, media files, and
activation keys.
Select Downl. phone softw. to
download and install a software
update. Follow the instructions on the
display.
If the installation was cancelled after
the download, select Install softw.
update to start the installation.
36 Digital rights management
Digital rights management
standby times are noticeably shorter than normal, replace the
battery. Use only Nokia approved batteries, and recharge
your battery only with Nokia approved chargers designated
for this device.
Content owners may use different types of digital rights
management (DRM) technologies to protect their intellectual
property, including copyrights. This device uses various types
of DRM software to access DRM-protected content. With this
device you can access content protected with WMDRM 10,
OMA DRM 1.0, OMA DRM 1.0 forward lock, and OMA DRM 2.0. If
certain DRM software fails to protect the content, content
owners may ask that such DRM software's ability to access
new DRM-protected content be revoked. Revocation may also
prevent renewal of such DRM-protected content already in
your device. Revocation of such DRM software does not affect
the use of content protected with other types of DRM or the
use of non-DRM-protected content.
If a battery is being used for the first time or if the battery has
not been used for a prolonged period, it may be necessary to
connect the charger, then disconnect and reconnect it to
begin charging the battery. If the battery is completely
discharged, it may take several minutes before the charging
indicator appears on the display or before any calls can be
made.
Safe removal. Always switch the device off and disconnect the
charger before removing the battery.
Digital rights management (DRM) protected content comes
with an associated activation key that defines your rights to
use the content.
Proper charging. Unplug the charger from the electrical plug
and the device when not in use. Do not leave a fully charged
battery connected to a charger, since overcharging may
shorten its lifetime. If left unused, a fully charged battery will
lose its charge over time.
If your device has OMA DRM-protected content, to back up
both the activation keys and the content, use the backup
feature of Nokia PC Suite.
Avoid extreme temperatures. Always try to keep the battery
between 15°C and 25°C (59°F and 77°F). Extreme
temperatures reduce the capacity and lifetime of the battery.
A device with a hot or cold battery may not work temporarily.
Battery performance is particularly limited in temperatures
well below freezing.
If your device has WMDRM-protected content, both the
activation keys and the content will be lost if the device
memory is formatted. You may also lose the activation keys
and the content if the files on your device get corrupted.
Losing the activation keys or the content may limit your
ability to use the same content onyourdeviceagain. Formore
information, contact your service provider.
Do not short-circuit. Accidental short-circuiting can occur
when ametallic object suchasa coin, clip, orpencausesdirect
connection of the positive (+) and negative (-) terminals of
the battery. (These look like metal strips on the battery.) This
might happen, for example, when you carry a spare battery
in your pocket or purse. Short-circuiting the terminals may
damage the battery or the connecting object.
Enhancements
Warning:
Use only batteries, chargers, and accessories approved by
Nokia for use with this particular model. The use of any other
types may invalidate any approval or warranty, and may be
dangerous. In particular, use of unapproved chargers or
batteries may present a risk of fire, explosion, leakage, or
other hazard.
Disposal. Do not dispose of batteries in a fire as they may
explode. Dispose of batteries according to local regulations.
Please recycle when possible. Do not dispose as household
waste.
Leak. Do not dismantle, cut, open, crush, bend, puncture, or
shred cells or batteries. In the event of a battery leak, prevent
battery liquid contact with skin or eyes. If this happens, flush
the affected areas immediately with water, or seek medical
help.
For availability of approved accessories, please check with
your dealer. When you disconnect the power cord of any
accessory, grasp and pull the plug, not the cord.
Battery
Battery and charger information
Damage. Do not modify, remanufacture, attempt to insert
foreign objects into the battery, or immerse or expose it to
water or other liquids. Batteries may explode if damaged.
Your device is powered by a rechargeable battery. The battery
intended for use with this device is BL-4U. Nokia may make
additional battery models available for this device. This
device is intended for use when supplied with power from
the following chargers: AC-8. The exact charger model
number may vary depending on the type of plug. The plug
variant is identified by one of the following: E, EB, X, AR, U, A,
C, K, or UB.
Correct use. Use the battery only for its intended purpose.
Improper battery use may result in a fire, explosion, or other
hazard. If the device or battery is dropped, especially on a
hard surface, and you believe the battery has been damaged,
take it to a service centre for inspection before continuing to
use it. Never use any charger or battery that is damaged. Keep
your battery out of the reach of small children.
The battery can be charged and discharged hundreds of
times, but it will eventually wear out. When the talk and
Nokia battery authentication guidelines 37
Nokia battery authentication guidelines
•
•
•
Do not use or store the device in dusty, dirty areas. Its
moving parts and electronic components can be
damaged.
Do not store the device in hot areas. High temperatures
can shorten the life of electronic devices, damage
batteries, and warp or melt certain plastics.
Do not store the device in cold areas. When the device
returns to its normal temperature, moisture can form
inside the device and damage electronic circuit boards.
Always use original Nokia batteries for your safety. To check
that you are getting an original Nokia battery, purchase it
from a Nokia authorised service centre or dealer, and inspect
the hologram label using the following steps:
Successful completion of the steps is not a total assurance of
the authenticity of the battery. If you have any reason to
believe that your battery is not an authentic, original Nokia
battery, you should refrain from using it, and take it to the
nearest Nokia authorised service centre or dealer for
assistance. If authenticity cannot be verified, return the
battery to the place of purchase.
•
•
Do not attempt to open the device other than as
instructed in this guide.
Do not drop, knock, or shake the device. Rough
handling can break internal circuit boards and fine
mechanics.
Authenticate hologram
•
•
•
•
Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean the device.
Do not paint the device. Paint can clog the moving parts
and prevent proper operation.
Use a soft, clean, dry cloth to clean any lenses, such as
camera, proximity sensor, and light sensor lenses.
Use only the supplied or an approved replacement
antenna. Unauthorised antennas, modifications, or
attachments could damage the device and may violate
regulations governing radio devices.
1
2
When you look at the hologram on the label, you should
see the Nokia connecting hands symbol from one angle
and the Nokia Original Enhancements logo when
looking from another angle.
When you angle the hologram left, right, down and up,
you should see 1, 2, 3 and 4 dots on each side
respectively.
•
•
Use chargers indoors.
Always create a backup of data you want to keep, such
as contacts and calendar notes.
•
To reset the device from time to time for optimum
performance, power off the device and remove the
battery.
These suggestions apply equally to your device, battery,
charger, or any enhancement. If any device is not working
properly, take it to the nearest authorised service facility for
service.
What if your battery is not authentic?
If you cannot confirm that your Nokia battery with the
hologram on the label is an authentic Nokia battery, please
do not use the battery. Take it to the nearest Nokia authorised
service centre or dealer for assistance. The use of a battery
that is not approved by Nokia may be dangerous and may
result in poor performance and damage to your device and
its enhancements. It may also invalidate any approval or
warranty applying to the device.
Disposal
To find out more about original Nokia batteries, see
The crossed-out wheeled-bin symbol on your product,
literature, or packaging reminds you that all electrical and
electronic products, batteries, and accumulators must be
taken to separate collection at the end of their working life.
This requirement applies to the European Union and other
locations where separate collection systems are available. Do
not dispose of these products as unsorted municipal waste.
Care and maintenance
Your device is a product of superior design and craftsmanship
and should be treated with care. The following suggestions
will help you protect your warranty coverage.
•
Keep the device dry. Precipitation, humidity, and all
types of liquids or moisture can contain minerals that
will corrode electronic circuits. If your device does get
wet, remove the battery, and allow the device to dry
completely before replacing it.
By returning the products to collection you help prevent
uncontrolled waste disposal and promote the reuse of
material resources. More detailed information is available
from the product retailer, local waste authorities, national
producer responsibility organizations, or your local Nokia
38 Additional safety information
Vehicles
representative. For the product Eco-Declaration or
instructions for returning your obsolete product, go to
country-specific information at www.nokia.com.
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles such as
electronic fuel injection, electronic antilock braking,
electronic speed control, and air bag systems. For more
information, check with the manufacturer of your vehicle or
its equipment.
Additional safety information
Small children
Your device and its accessories are not toys. They may contain
small parts. Keep them out of the reach of small children.
Only qualified personnel should service the device or install
the device in a vehicle. Faulty installation or service may be
dangerous and may invalidate your warranty. Check regularly
that all wireless device equipment in your vehicle is mounted
and operating properly. Do not store or carry flammable
liquids, gases, or explosive materials in the same
Operating environment
This device meets RF exposure guidelines in the normal use
position at the ear or at least 1.5 centimetre (5/8 inch)away
from the body. Any carry case, belt clip, or holder for body-
worn operation should not contain metal and should position
the device the above-stated distance from your body.
compartment as the device, its parts, or accessories.
Remember that air bags inflate with great force. Do not place
your device or accessories in the air bag deployment area.
To send data files or messages requires a quality connection
to the network. Data files or messages may be delayed until
such a connection is available. Follow the separation distance
instructions until the transmission is completed.
Switch off your device before boarding an aircraft. The use of
wireless teledevices in an aircraft may be dangerous to the
operation of the aircraft and may be illegal.
Medical devices
Potentially explosive environments
Operation of radio transmitting equipment, including
wireless phones, may interfere with the function of
inadequately protected medical devices. Consult a physician
or the manufacturer of the medical device to determine
whether they are adequately shielded from external RF
energy. Switch off your device when regulations posted
instruct you to do so. Hospitals or health care facilities may
use equipment sensitive to external RF energy.
Switch off your device in any area with a potentially explosive
atmosphere. Obey all posted instructions. Sparks in such
areas could cause an explosion or fire resulting in bodily
injury or death. Switch off the device at refuelling points such
as near gas pumps at service stations. Observe restrictions in
fuel depots, storage, and distribution areas; chemical plants;
or where blasting operations are in progress. Areas with a
potentially explosive atmosphere are often, but not always,
clearly marked. They include areas where you would be
advised to turn off your vehicle engine, below deck on boats,
chemical transfer or storage facilities and where the air
contains chemicals or particles such as grain, dust, or metal
powders. You should check with the manufacturers of
vehicles using liquefied petroleum gas (such as propane or
butane) to determine if this device can be safely used in their
vicinity.
Implanted medical devices
Manufacturers of medical devices recommend a minimum
separation of 15.3 centimetres (6 inches) between a wireless
device and an implanted medical device, such as a pacemaker
or implanted cardioverter defibrillator, to avoid potential
interference with the medical device. Persons who have such
devices should:
•
Always keep the wireless device more than 15.3
centimetres (6 inches) from the medical device.
Emergency calls
Important: This device operates using radio signals,
wireless networks, landline networks, and user-programmed
functions. If your device supports voice calls over the internet
(internet calls), activate both the internet calls and the
cellular phone. The device may attempt to make emergency
calls over both the cellular networks and through your
internet call provider if both are activated. Connections in all
conditions cannot be guaranteed. You should never rely
solely on any wireless device for essential communications
like medical emergencies.
•
•
Not carry the wireless device in a breast pocket.
Hold thewireless device tothe ear opposite the medical
device.
•
•
Turn the wireless device off if there is any reason to
suspect that interference is taking place.
Follow the manufacturer directions for the implanted
medical device.
If you have any questions about using your wireless device
with an implanted medical device, consult your health care
provider.
To make an emergency call:
1
If the device is not on, switch it on. Check for adequate
signal strength. Depending on your device, you may
also need to complete the following:
Hearing aids
Some digital wireless devices may interfere with some
hearing aids.
•
Insert a SIM card if your device uses one.
Additional safety information 39
•
•
Remove certain call restrictions you have
activated in your device.
Change your profile from Offline or Flight profile
to an active profile.
2
3
4
Press the end key as many times as needed to clear the
display and ready the device for calls.
Enter the official emergency number for your present
location. Emergency numbers vary by location.
Press the call key.
When making an emergency call, give all the necessary
information as accurately as possible. Your wireless device
may be the only means of communication at the scene of an
accident. Do not end the call until given permission to do so.
Certification information (SAR)
This mobile device meets guidelines for exposure to
radio waves.
Your mobile device is a radio transmitter and receiver. It is
designed not to exceed the limits for exposure to radio waves
recommended by international guidelines. These guidelines
were developed by the independent scientific organisation
ICNIRP and include safety margins designed to assure the
protection of all persons, regardless of age and health.
The exposure guidelines for mobile devices employ a unit of
measurement known as the Specific Absorption Rate or SAR.
The SAR limit stated in the ICNIRP guidelines is 2.0 watts/
kilogram (W/kg) averaged over 10 grams of tissue. Tests for
SAR are conducted using standard operating positions with
the device transmitting at its highest certified power level in
all tested frequency bands. The actual SAR level of an
operating device can be below the maximum value because
the device is designed to use only the power requiredtoreach
the network. That amount changes depending on a number
of factors such as how close you are to a network base station.
The highest SAR value under the ICNIRP guidelines for use of
the device at the ear is 0.35 W/kg.
Use of device accessories may result in different SAR values.
SAR values may vary depending on national reporting and
testing requirements and the network band. Additional SAR
information may be provided under product information at
40 Index
Index
A
F
factory settings
flash messages
flight mode
flight query
font size
access codes
active standby
anykey answer
applications
G
gallery
B
games
barring password
battery
general packet radio service
GPRS
GPS
battery charge status
browser
H
business cards
handsfree
headset
C
cache memory
calculator
help text
helpful hints
home screen
call divert
call log
I
call waiting
caller id
IM
camera
image
capture an image
configuration
configuration setting service
contacts
indicators
info messages
instant messaging
internet
—
memory
K
cookies
keyguard
keypad lock
keys
D
data cable
dialling
L
dialling shortcuts
digital rights
display
language
loudspeaker
downloads
M
E
Maps
e-mail
memory card
message centre number
message sending
music player
equaliser
Index 41
My Nokia
34 speed dialling
start up tone
N
status indicators
33 stereo widening
32 stopwatch
19 strap
Nokia Care
notes
number mode
O
T
offline mode
text modes
operator menu
16 themes
tones
P
traditional text input
packet data
parts
U
PC Suite
32 updates
phone software updates
PictBridge
picture
—
device software
15 UPIN
23 USB data cable
PIN
V
power saver
power saving
predictive text input
print images
profiles
video call
19 video clips
24 voice clarity
12 voice commands
PUK
voice dialling
voice recognition
voice recorder
R
radio
W
recorder
redial
19 wallpaper
web
S
write text
security code
security module
service commands
shortcuts
signal strength
SIM
—
services
SIM card
SIM messages
sleep mode
software update
software updates
|