User Guide
Nokia 3600 series
User Guide
The wireless phone described in this guide is approved for use in GSM 900, GSM 1800, and
GSM 1900 networks.
LEGAL INFORMATION
Part No. 9355946, Issue No. 1 1 1
Copyright ©2002 Nokia. All rights reserved.
Nokia, Nokia Connecting People, Nokia 3650, Nokia 3600, and the Nokia Original Accessories
logos are trademarks or registered trademarks of Nokia Corporation. All other product and
company names mentioned herein may be trademarks or tradenames of their respective
owners.
Printed in Canada 03/2003
US Patent No 5818437 and other pending patents.
T9 text input software Copyright ©1999-2002. Tegic Communications, Inc. All rights reserved.
Includes RSA BSAFE cryptographic or security protocol software from RSA Security.
Java is a trademark of Sun Microsystems, Inc.
The information in this user guide was written for Nokia 3600 series phones. Nokia operates a
policy of ongoing development. Nokia reserves the right to make changes and improvements
to any of the products described in this document without prior notice.
UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR
INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES
HOWSOEVER CAUSED.
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED “AS IS.” EXCEPT AS REQUIRED BY
APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY AND RELIABILITY OR
CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR
WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.
EXPORT CONTROLS
This product contains commodities, technology or software exported from the United States in
accordance with the Export Administration regulations. Diversion contrary to U.S. or Canadian
law is prohibited.
FCC/INDUSTRY CANADA NOTICE
Your phone may cause TV or radio interference (for example, when using a telephone in close
proximity to receiving equipment). The FCC or Industry Canada can require you to stop using
your telephone if such interference cannot be eliminated. If you require assistance, contact
your local service facility. This device complies with part 15 of the FCC rules. This device
contains a radio transceiver and digital circuitry that supports its features. Operation of the
digital device circuitry is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Modifications to this device not authorized by Nokia may void the authority granted for
operation of this device and should not be made.
Contents
1. For your safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Network Services . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. General information . . . . . . . . . . . . . . . . . . . . . . . . . 5
Understand your phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Options lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Move the Navigation bar horizontally . . . . . . . . . . . . . . . . . . . . 15
Actions common to all applications . . . . . . . . . . . . . . . . . . . . . . 15
Volume control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Shared memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
3. Your phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Make a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Answer a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Log - Call log and general log. . . . . . . . . . . . . . . . . . . . . . . . . . . 24
SIM folder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
4. Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Change general settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Phone settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Call settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Connection settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Date and time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Call restriction (System service) . . . . . . . . . . . . . . . . . . . . . . . . . 45
System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Accessory settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
5. Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Create contact cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Copy contacts between the SIM card and phone memory. . . . 47
Edit contact cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
[ iii ]
Options when viewing a contact card . . . . . . . . . . . . . . . . . . . . 49
Manage contact groups. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
6. Camera and Images . . . . . . . . . . . . . . . . . . . . . . . . . 55
Take pictures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Store pictures in Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
7. Video recorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Record a video clip. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Watch a video clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
8. RealOne Player™ . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Play media files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Send media files. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Change the settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
9. Messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Messaging - General information. . . . . . . . . . . . . . . . . . . . . . . . 70
Write text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Create and send new messages . . . . . . . . . . . . . . . . . . . . . . . . . 76
Inbox - receive messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
My folders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Remote mailbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Outbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
View messages on a SIM card. . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Cell broadcast (system service). . . . . . . . . . . . . . . . . . . . . . . . . . 93
Service command editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Messaging settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Wireless village . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
10. Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Change the profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Customize profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
[ iv ]
11. Favorites. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Add shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Shortcut options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
12. Calendar and To-do . . . . . . . . . . . . . . . . . . . . . . . 105
Create calendar entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Set calendar alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Send calendar entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
To-do. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
13. Extras . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Composer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Recorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Memory card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
14. Services (XHTML) . . . . . . . . . . . . . . . . . . . . . . . . . 119
Basic steps for accessing the web . . . . . . . . . . . . . . . . . . . . . . 119
Phone browser service settings. . . . . . . . . . . . . . . . . . . . . . . . . 120
Browsing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Viewing saved pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Download through the browser . . . . . . . . . . . . . . . . . . . . . . . . 124
End a connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Browser settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
15. Applications (Java™) . . . . . . . . . . . . . . . . . . . . . . . 127
Install a Java application. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Java application settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
16. Manager. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Install applications and software . . . . . . . . . . . . . . . . . . . . . . . 130
Install software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
[ v ]
Remove software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
View memory consumption. . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
17. Connectivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Bluetooth connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Infrared connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
Connect your phone to a computer . . . . . . . . . . . . . . . . . . . . . 141
Use your phone as a modem to connect to
the Internet or to send or receive faxes. . . . . . . . . . . . . . . . . . 141
18. PC Suite for Nokia 3600 series . . . . . . . . . . . . . . . 142
Software and hardware requirements . . . . . . . . . . . . . . . . . . . 142
Install PC Suite. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
Connect your phone to the PC . . . . . . . . . . . . . . . . . . . . . . . . . 144
Start to use PC Suite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Online and offline modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Connection status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Main window information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
PC Suite applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
Remove PC Suite from your PC. . . . . . . . . . . . . . . . . . . . . . . . . 152
19. Reference information . . . . . . . . . . . . . . . . . . . . . . 154
Battery statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
Use proper care and maintenance . . . . . . . . . . . . . . . . . . . . . . 155
Understand Important safety information. . . . . . . . . . . . . . . . 156
Certification Information (SAR) . . . . . . . . . . . . . . . . . . . . . . . . 160
Use Accessories safely . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
Glossary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
Technical information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
Frequently Asked questions (FAQ) . . . . . . . . . . . . . . . . . . . . . . 170
20. Nokia One-Year Limited Warranty. . . . . . . . . . . . . 174
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
[ vi ]
1 For your safety
The use of mobile phones and their accessories may be prohibited or restricted
in certain areas. Obey applicable law regarding mobile phone usage.
Read these simple guidelines. Breaking the rules may be dangerous or
illegal. Further detailed information is given in this User Guide.
Do not switch the phone on when wireless phone use is
prohibited or when it may cause interference or danger.
ROAD SAFETY COMES FIRST
Don't use a hand-held phone while driving.
INTERFERENCE
All wireless phones may get interference, which could affect
performance.
SWITCH OFF IN HOSPITALS
Follow any regulations or rules. Switch the phone off near
medical equipment.
SWITCH OFF IN AIRCRAFT
Wireless devices can cause interference in aircraft.
SWITCH OFF WHEN REFUELING
Don't use the phone at a refuelling point. Don't use near fuel
or chemicals.
SWITCH OFF NEAR BLASTING
Don't use the phone where blasting is in progress. Observe
restrictions, and follow any regulations or rules.
USE SENSIBLY
Use only in the normal position. Don't touch the antenna
unnecessarily.
[ 1 ]
QUALIFIED SERVICE
Only qualified personnel may install or repair phone equipment.
1
ACCESSORIES AND BATTERIES
Use only approved accessories and batteries. Do not connect
incompatible products.
WATER-RESISTANCE
Your phone is not water-resistant. Keep it dry.
BACKUP COPIES
Remember to make backup copies of all important data.
CONNECTING TO OTHER DEVICES
When connecting to any other device, read its user's guide
fordetailedsafetyinstructions.Donotconnectincompatible
products.
CALLING
Ensure the phone is switched on and in service. Enter the phone
number, including the area code, then press
press . To answer a call, press
. To end a call,
.
EMERGENCY CALLS
Ensure the phone is switched on and in service. Press
as many times as needed (e.g. to exit a call, to exit a menu, etc.)
to clear the display. Enter the emergency number, then press
. Give your location. Do not end the call until told to
do so.
[ 2 ]
For your safety
1
Network Services
The wireless phone described in this guide is approved for use on the
GSM 900, GSM 1800, and GSM 1900 networks.
A number of features included in this guide are called Network Services.
These are special services that you arrange through your wireless service
provider. Before you can take advantage of any of these Network Services,
you must subscribe to them through your service provider and obtain
instructions for their use from your service provider.
Note: Some networks may not support all language-dependent characters
and/or services.
Check the model number of any charger before use with this device. This
device is intended for use when supplied with power from ACP-12U, ACP-8U,
LCH-9 and LCH-12.
Warning: Use only batteries, chargers, and accessories approved by the
phone manufacturer for use with this particular phone model.
The use of any other types may invalidate any approval or
warranty applying to the phone and may be dangerous.
For availability of approved accessories, please check with your dealer.
When you disconnect the power cord of any accessory, grasp and pull the
plug, not the cord.
[ 3 ]
Contacting Nokia
1
To help Nokia promptly answer your questions, please have your phone’s
model number, IMEI number, and your postal code ready when you call
Customer Care. The IMEI and model number are on the back of your phone
under the battery. If you are calling about an accessory, please have it
available for reference.
Nokia Customer Care
Nokia Products Ltd.
601 Westney Rd. South
Ajax, Ontario L1S 4N7
Tel: 1-905-427-1373
1-888-22-NOKIA
(1-888-226-6542)
Fax: 1-905-427-1070
Web site: www.nokia.ca
[ 4 ]
General information
2
2 General information
Congratulations on purchasing your Nokia 3600 series mobile phone. Your
phone provides many functions which are practical for daily use, such as
a digital camera, a video recorder, messaging, e-mail, a clock, an alarm
clock, a calculator, and a calendar. A variety of Xpress onTM colour covers
are also available. Your phone can connect to a PC, laptop, or other device
using a data cable, bluetooth, or the built-in IR port. For more information
on connectivity, refer to the PC Connectivity Guide. The PC Connectivity
guide, Nokia PC Suite, and all related software can be downloaded from
the Download Software section of www.nokia.ca.
• UNDERSTAND YOUR PHONE
Insert the SIM card and load the battery
Important: Keep all miniature SIM cards out of the reach of small children.
Note: Before removing the covers, always switch off the power and
disconnect the phone from the charger or any other device.
Always store and use the phone with the covers attached.
1
Open the cover with
the back of the phone
facing you. Press the
locking catch (1) in the
direction of the arrow
and slide the cover (2).
1
2
Camera lens
[ 5 ]
2
Find the SIM card slot (3). Place the
SIM card carefully into the slot. Make
sure that the beveled corner on the
SIM card faces the bottom of the
phone and that the golden contact
area on the card faces downward.
2
3
3
Slide the silver catch over the SIM card to
secure it. (4).
4
4
Load the battery (5): Align
the golden contacts of
the battery with the
corresponding connectors
on the phone, and push the
opposite end of the battery
until it snaps into place.
Replace the cover.
5
Charge the battery
1
Connect the lead to the charger. You will hear it click into place.
2
Connect the lead from the charger to the
base of the phone (6).
3
Connect the charger to an AC wall outlet. The
battery indicator bar starts scrolling. Note
that you can use the phone while charging.
6
[ 6 ]
General information
4
When the battery is fully charged, the bar stops scrolling. Disconnect
the charger from the AC outlet and then from the phone. See also
“Battery statements” on page 154 in the User Guide.
2
Note: Remove the battery only when the phone is switched off.
Switch the phone on or off
Press and hold the power key
.
WARNING! Do not switch on the
phone when wireless phone use is
prohibited or when it may cause
interference or danger.
TIPS ON EFFICIENT OPERATION: Your phone has
a built-in antenna (gray area in picture). As with any
other radio transmitting device, do not touch the
antenna unnecessarily when the phone is switched
on. Contact with the antenna affects call quality
and may cause the phone to operate at a higher
power level than otherwise needed. Not touching
the antenna area during a phone call optimizes the
antenna performance and the talktime of your phone.
If the phone requests a PIN code:
The PIN code is usually supplied with the SIM card.
Key in the code (displayed as ****) and press
OK.
If the phone requests a security code:
Key in the security code (displayed as *****) and press
OK.
The factory setting for the security code is 12345. For more information
[ 7 ]
FIRST SETTINGS
Use the number keys
the date. Press
2
-
to key in first the current time and then
OK to accept the settings.
Use the Scroll key
5
1
3
Press the scroll key on the top
, bottom
, left
and right
(shown with
arrows 1 to 4) to move in the Menu. Scroll
to an application or a folder and press the
4
scroll key in the middle
(shown with
2
arrow 5) to open it. For example:
1
2
To open an Options list, press
Options. The small arrow at the bottom
of the display (1) indicates if the list
contains more items. The lighter the
arrow, the fewer the items left in the list.
2
To scroll down the Options list, press
A small arrow to the right (2) indicates a
sublist. To open a sublist, press
.
.
To start an action, scroll to a command
and press
.
1
3
Press
to go to a tab (3), a new page,
3
or view in an application.
Make a call
1
In standby mode, key in the phone number, including the area code.
If you make a mistake, press
to clear numbers.
2
3
Press
Press
and wait for the answer.
to finish the call (or to cancel the call attempt).
[ 8 ]
General information
Copy names and numbers from a SIM card to the
2
phone memory
If you have stored names and phone numbers on a SIM card, you can copy
them to the phone memory.
1
2
3
4
Press
Use the scroll key to move to Contacts.
Press to open Contacts.
to open the main Menu.
When you open Contacts for the first time, the phone asks you if you
want to copy all your contact data from the SIM card to the phone
memory. Press
OK.
Keyguard
Use the keyguard (keypad lock) to prevent the keys from being
accidentally pressed.
To lock: Press
and . When the keys are locked,
appears
on the display.
To unlock: Press
and
.
When the keyguard is on, press
the phone can be operated normally.
to answer a call. During a call,
Note: When Keyguard is on, calls may be possible to the emergency number
programed into your phone (911 or other official emergency number).
Just key in the emergency number and press
. The number is
displayed only after you have keyed in its last digit.
Shortcuts in standby mode
•
Press
to open the main Menu.
•
Press
to open a list of the last dialed numbers. Press
to view
received and missed calls lists.
•
Press to open Contacts.
[ 9 ]
•
•
To change the profile, press
briefly and select the profile.
2
Shortcuts in editors
•
Press
text. Press
to open a list of commands related to writing and editing
to switch between predictive, traditional text input
and number mode (Predictive text→ Predictive text on, Alpha mode,
Number mode).
•
When you are writing, press
of special characters, or press
repeatedly to access different kinds
to open a list of special characters.
•
•
Press
You can also use
same time, move the scroll key to mark text to be copied or erased.
to enter a space.
to mark items. Press and hold
and at the
Other shortcuts
In the main Menu, press and hold
to open a view where you can see
all the applications that are open and switch between them.
Standby mode
The indicators described are shown when the phone is ready for use, with
no characters keyed in. In this state, the phone is in ‘standby mode’.
A
Shows the signal strength of the
cellular system at your current
location. The higher the bar, the
stronger the signal. The symbol
isreplaced withthe GPRSsymbol
when the GPRS connection
has been set to When available
and a connection is available in
the system or in the current
[ 10 ]
General information
B
Shows an analog or a digital clock. Also see settings for “Date and
2
C
D
Indicates which cellular system the phone is currently using.
Shows the battery charge level. The higher the bar, the more power
left in the battery.
E
Navigation bar: shows the currently active profile. If the selected profile
is Normal, the current date is displayed instead of the profile name. For
further information, see “Move the Navigation bar horizontally” on
F
Shows the current shortcuts assigned for the selection keys
and
.
Note: Your phone has a screen saver. If there are no actions for five
minutes, the display is cleared and a screen saver becomes visible.
saver, press any key.
Tip: You can change the selection key shortcuts and the background
INDICATORS RELATED TO ACTIONS
One or more of the following icons may be shown when the phone is in
standby mode:
- Indicates that you have received new messages in the Inbox in
Messaging. If the indicator is blinking, the phone memory is low
and you must delete some data. For further information, see
- Indicates that you have received new e-mail.
- Indicates that you have received one or several voice messages.
- Indicates that there are messages waiting to be sent in Outbox.
[ 11 ]
- Indicates when Ringing options has been set to Silent and Message
2
- Indicates that the phone’s keypad is locked.
- Indicates that Bluetooth is active. Note that, when data is
transmitted via Bluetooth,
is shown.
- Indicates that all calls to the phone
are forwarded to a voice mailbox or
another number. See “Settings for
call forwarding” on page 23. If you
have two phone lines, the forward
indicator for the first line is
and
for the second line
. See “Line in
- Indicates that you can make calls using
phone line 2 only (system service).
DATA CONNECTION INDICATORS
•
When an application is establishing a data connection, one of the
indicators below blinks in standby mode.
•
When an indicator is shown continuously, the connection is active.
for a data call,
for a high speed data call,
Note: Check with your service provider for availability of high speed
data calls.
is shown instead of the signal strength indicator when there is an
active GPRS connection. for when the GPRS connection is put on hold
during voice calls.
for a fax call,
for a Bluetooth connection, and
for an infrared connection.
[ 12 ]
General information
• MENU
2
Press
(Menu key) to
open the main Menu. In the
Menu, you can access all the
applications in your phone.
5
1
3
Options in the Menu are:
Open, List view / Grid view,
Move, Move to folder, New
folder, Help, and Exit.
4
2
Using the scroll key to move
Moving in the Menu Press the scroll key on the top
, bottom
, left
and right
(shown with arrows 1 to 4) to
move in the Menu.
Opening applications Scroll to an application or a folder and press the scroll
or folders
key in the middle
(shown with arrow 5) to open it.
Closing applications
Backstep by pressing Back or Exit as many times as
is needed to return to standby mode or select
Options→ Exit.
If you press and hold
, the phone returns to standby mode and the
application is left open in the background.
Pressing
will always end a call, even if another application is active
and displayed.
When you switch the phone off, applications are closed and any unsaved
data is saved automatically.
Tip: Select Options→ List view if you want to view the applications in a list.
[ 13 ]
Rearrange the Menu
2
You can rearrange the Menu in any order you
like. You can move applications that you use
more often from a folder to the Menu, and
place applications you use less often in
folders. You can also create new folders.
1
Scroll to the item you want to move and
select Options→ Move. A check mark is
placed beside the application.
2
Move the selection where you want the
application to be and press OK.
Switch between applications
If you have several applications open and want to switch from one
application to another: Press and hold
switching window opens showing a list of applications that are currently
open. Scroll to an application and press
(Menu key). The application
.
Note: If memory is getting low, the phone may close some applications.
The phone saves any unsaved data before an application is closed.
• OPTIONS LISTS
In this user guide, you can see the Options list commands which tell you
what commands are available in different views and situations. The
available commands change depending on the view you are in. In some
situations, when you press the scroll key, a shorter options list appears
showing only the main commands available in the view.
Online help
Your Nokia 3600 series phone also has a help function which you can
access from any application or view showing the Options selection
corresponding to the
key.
[ 14 ]
General information
• MOVE THE NAVIGATION BAR HORIZONTALLY
2
In the navigation bar, you can see:
•
small arrows or tabs which tell you if there are more views, folders, or
files you can move to.
•
•
other information, for example, 2/14 in the figure below means that
the current picture is the second of 14 pictures in the folder. Press
to see the next picture.
• ACTIONS COMMON TO ALL APPLICATIONS
•
Open items for viewing - When you are viewing a list of files or
folders, to open an item, scroll to an item and press the scroll key or
select Options→ Open.
•
Edit items - To open an item for editing, you sometimes need to first
open it for viewing and then select Options→ Edit, if you want to
change its contents.
•
•
•
Rename items - To give a new name to a file or folder, scroll to it and
select Options→ Rename.
Remove, delete items - Scroll to the item and select Options→ Delete
or press
. To delete many items at a time, you first need to mark them.
Mark an item - There are several ways to select items when you are
in a list.
•
To select one item at a time, scroll to it and select Options→
and the scroll key at the same
time. A check mark is placed next to the item.
Mark/Unmark→ Mark or press
•
To select all items in the list, select Options→ Mark/Unmark→
Mark all.
[ 15 ]
•
Mark multiple items - Press and hold
the scroll key down or up. As the selection moves, a check mark is
and at the same time move
2
placed next to the items. To end the selection, stop the scrolling with
the scroll key and then release
.
After you have selected all the items you want, you can move or
delete them by selecting Options→ Move to folder or Delete.
•
To unmark an item, scroll to it and select Options→ Mark/Unmark→
Unmark or press and the scroll key at the same time.
•
•
Create folders - To create a new folder, select Options→ New folder.
You are asked to give a name to the folder (max. 35 letters).
Move items to a folder - To move items to a folder or between
folders, select Options→ Move to folder (not shown if there are no
folders available). When you select Move to folder, a list of available
folders opens and you can also see the root level of the application
(for moving an item out of a folder). Select the location you want the
item to be moved to and press OK.
Search for items
You can search for a name, file, folder, or shortcut by using the
search field. In some situations the search field is not visible
automatically, and you can activate it by selecting
Options→ Find or just by starting to key in letters.
1
To search for an item, start to key in text
in the search field. The phone immediately
starts to search for matches and moves
the selection on the best match.
To make the search more accurate, key in
more letters and the selection moves to the
item that best matches the letters.
2
When the correct item is found, press
to open it.
[ 16 ]
General information
• VOLUME CONTROL
2
When you have an active call or are listening to a sound, press
to increase or decrease the volume level, respectively.
or
Loudspeaker
Your phone has a loudspeaker for handsfree use. The loudspeaker allows
you to speak and listen to the phone from a short distance without having
to hold the phone to your ear. The loudspeaker can be used during a call,
with sound applications, and when viewing multimedia messages. RealOne
Player™ uses the loudspeaker by default when you watch a video. Using
the loudspeaker makes it easier to use other applications during a call.
Voice volume icons:
- for earpiece mode,
- for loudspeaker mode.
ACTIVATE THE LOUDSPEAKER
To use the loudspeaker during an already active call, select Options→
Activatehandsfree. A tone is played,
is shown in the navigation bar, and
the volume indicator changes.
Volumeindicatorsforearpieceandloudspeakermodes
are shown in the navigation bar.
The loudspeaker needs to be activated separately each time for phone
calls, but the sound applications such as Composer and Recorder use the
loudspeaker by default.
The loudspeaker cannot be activated when you have a headset connected
to the phone.
TURN OFF THE LOUDSPEAKER
When you have an active call or a sound is playing, select Options→
Deactiv.handsfree.
Headset mode
To adjust the volume level when a headset is connected to your phone,
press
or
or use the headset’s keys.
[ 17 ]
• SHARED MEMORY
2
The following features in your phone use shared memory: contacts, text,
text messages, multimedia messages, images and ringing tones, video
recorder and player, calendar and to-do notes, and downloaded applications.
Using any of these features leaves less memory for other features. This is
especially true with heavy use of any of the features. For example, saving
many images may take all of the shared memory and your phone may
display that the memory is full. In this case, delete some of the information
or entries reserving the shared memory.
[ 18 ]
Your phone
3
3 Your phone
• MAKE A CALL
1
Key in the phone number, including the area code. Press
or
to
move the cursor. Press
to remove a number.
For international calls, press
twice for the international prefix (the +
character replaces the international access code) and then key in the
country code, the area code without 0, and the phone number.
Tip: To adjust the volume during a call, press
to increase and
to
decrease the volume level.
Note: Calls described here as international may, in some cases, be made
between regions of the same nation.
2
3
Press
Press
to call the number.
to end the call (or to cancel the call attempt).
Normal position: Hold the phone as you would hold any other telephone.
Note: Pressing
will always end a call, even if another application is
active and displayed on the display.
Make a call using the Contacts directory
1
To open the Contacts directory, go to
Menu→ Contacts.
2
To find a contact, scroll to the desired name,
or key in the first letters of the name. The
Searchfield opensautomatically and matching
contacts are listed.
3
Press
to start the call.
If the contact has more than one phone
number, scroll to the number and press
to start the call.
[ 19 ]
Call your voice mailbox
3
The voice mailbox (system service) is an answering machine where callers
who are unable to reach you can leave you voice messages.
•
•
To call your voice mailbox, press
and
in standby mode.
If the phone asks for the voice mailbox number, key it in and press OK.
You can obtain this number from your service provider.
Each phone line may have its own voice mailbox number, see “Line in use
Tip: If your voice mail requires you to enter a password every time you
call to listen to your voice messages, you may want to add a touch
tone number after the voice mailbox number. This way the password
is given automatically every time you call your voice mail. For example,
1234567p1234# where 1234 is the password and ‘p’ inserts a pause.
See “Send touch tones” under the section “Options during a call” on
CHANGE THE VOICE MAILBOX NUMBER
To change the phone number of your voice mailbox, go to Menu→ Tools→
Voice mailbox and select Options→ Change number. Key in the number
(obtained from your service provider) and press OK.
1-touch dialing
To view the 1-touch dialing grid, go to Menu→ Tools→ 1-touch dial.
1
Assign a phone number to one of the 1-touch dialing keys (
-
),
2
To call the number: In standby mode, press the corresponding 1-touch
dialing key and . If the 1-touch dialing function is set to On: Press
and hold the corresponding 1-touch dialing key until the call is started.
Make a conference call
Conference calling is a system service that allows you to make a conference
call with a maximum of six participants, including yourself.
[ 20 ]
Your phone
1
2
Make a call to the first participant.
3
To make a call to a new participant, select Options→ New call. Key in
or search the memory for the phone number of the participant and
press OK. The first call is automatically put on hold.
3
4
When the new call has been answered, join the first participant in the
conference call. Select Options→ Conference.
To add a new person to the call, repeat step 2 and then select Options→
Conference→ Add to conference.
•
To have a private conversation with one of the participants: Select
Options→ Conference→ Private. Scroll to the desired participant
and press Private. The conference call is put on hold in your phone,
and the other participants can still continue talking with each other
while you have a private discussion with one participant only. Once
you have finished the private conversation, select Options→Add to
conference to return to the conference call.
•
To drop one participant from the conference call, select Options→
Conference→ Drop participant, then scroll to the participant and
press Drop.
5
To end the active conference call, press
.
A conference call with two participants
is shown.
Tip: The quickest way to make a new call is to
dial the number and press
to start
the call. The existing call is automatically
put on hold.
• ANSWER A CALL
•
To answer an incoming call, press
.
•
To end the call, press
.
If you do not want to answer a call, press
busy” tone or your voicemail message.
. The caller will hear a “line
[ 21 ]
Tip: If you have activated the Call forward→ If busy function to forward
calls, for example, to your voice mailbox, rejecting an incoming call
3
When a call comes in, press Mute to quickly mute the ringing tone.
Tip: To adjust the phone tones for different environments and events, for
example, when you want your phone to be silent, see “Profiles” on
Note: It is possible that the phone assigns a wrong name for the phone
number. This happens if the phone number of the caller is not stored
in Contacts but the seven last digits of the number match another
number that is stored in Contacts. In this case, call identification
is not correct.
Call waiting (system service)
If you have activated the Call waiting service,
the system will notify you of a new incoming
call while you have a call in progress. See “Call
1
During a call, press
to answer the
waiting call. The first call is put on hold.
To switch between the two calls,
press Swap.
2
To end the active call, press
.
Tip: To end both calls at the same time,
select Options→ End all calls and press OK.
Options during a call
Many options that you can use during a call are system services. Press
Options during a call for some of the following options:
Mute or Unmute, End active call, End all calls, Hold or Unhold, Handset,
BT handsfree, New call, Conference, Private, Drop participant, Answer, and
Decline.
Swap is used to switch between the active call and the call on hold.
[ 22 ]
Your phone
Transfer is used to connect an incoming call or a call on hold with an active
call and to disconnect yourself from both calls.
3
Send touch tones is used to send touch tone strings, for example, passwords
or bank account numbers.
1
Key in the digits with
tone, which is transmitted while the call is active. Press
-
. Each keystroke generates a touch
repeatedly
to produce: *, p (inserts a pause of about two seconds before, or
between touch tone characters.), and w (if you use this character, the
remaining sequence is not sent until you press Send again during the
call). Press
to produce #.
2
To send the tone, press OK.
Tip: You can also store a sequence of touch tones for a contact card. When
you make a call to the contact, you can retrieve the sequence. Add
touch tones to the phone number or Touch tone fields in a contact card.
Glossary: Touch tones are the tones you hear when you press the
number keys on the phone keypad. Touch tones allow you to
communicate with voice mailboxes and computerized telephony
systems.
Settings for call forwarding
When this system service is activated, you can direct your incoming calls to
another number, for example, to your voice mailbox number. For details,
contact your service provider.
Go to Menu→ Tools→ Call forwarding
Select one of the forward options, for example, select If busy to forward
voice calls when your number is busy or when you decline incoming calls.
•
Select Options→ Activate to turn the forward setting on, Cancel to
turn the forward setting off, or Check status to check whether the
forward is activated or not.
•
To cancel all active forwards, select Options→ Cancel all forwards.
For information about the forward indicators, see “Indicators related to
[ 23 ]
Note: You cannot have rejection of incoming calls and call forwarding active
3
• LOG - CALL LOG AND GENERAL LOG
Go to Menu→ Log.
In the log you can monitor phone calls, text messages, packet data
connections, and fax and data calls registered by the phone. You can filter
the log to view just one type of event and create new contact cards based
on the log information.
To view a list of sent messages, go to Messaging→ Sent.
Note: Connections to your remote mailbox, multimedia messaging
center, or browser pages are shown as data calls or packet data
connections in the general communications log.
Recent calls log
Go to Menu→ Log→ Recent calls
The phone registers the phone numbers of missed, received, and dialed calls,
and the approximate duration and cost of your calls. The phone registers
missed and received calls only if the system supports these functions, and
the phone is switched on and within the system’s service area.
Options in the Missed, Received, Dialed views are: Call, Use number,
Delete, Clear list, Add to Contacts, Help, and Exit.
Icons
for missed calls
for received calls
for dialed numbers
[ 24 ]
Your phone
Missed calls and received calls
3
To view a list of the last 20 phone numbers from which somebody has
tried to call you without success (system service), go to Log→ Recent
calls→ Missed calls.
When you see a note in standby mode about missed calls, press Show to
access the list of missed calls. To call back, scroll to the number or name
you want and press
.
To view a list of the 20 numbers or names from which you have most recently
accepted calls (system service), go to Log→ Recent calls→ Received calls.
Dialed numbers
Press
in standby mode to open the Dialed numbers view.
To view the 20 phone numbers that you have most recently called or
attempted to call, go to Log→ Recent calls→ Dialed nos.
Erasing recent call lists
•
•
•
To clear all recent call lists, select Options→ Clear recent calls in the
Recent calls main view.
To clear one of the call registers, open the log you want to erase and
select Options→ Clear list.
To clear an individual entry, open a log, scroll to the entry, and press
.
Call duration
Go to Menu→ Log.
Allows you to view the duration of your incoming and outgoing calls. To
see the call duration timer while you have an active call, select Options→
Settings→ Show call duration→ Yes.
Erasing call duration timers - Select Options→ Clear timers. For this you
scroll to it and press
.
[ 25 ]
Call costs (system service)
3
Go to Log→ Call costs.
Call costs allows you to check the cost of the
last call or all calls. The call costs are displayed
separately for each SIM card.
The actual invoice for calls and services from
your service provider may vary, depending upon
system features, rounding-off for billing, taxes
and so forth.
CALL COSTS LIMIT SET BY A SERVICE PROVIDER
Your service provider can limit the cost of your calls to a certain amount
of charging units or units of currency. When the limited charging mode is
active, calls can be made only as long as the preset credit limit (call cost
limit) is not exceeded and you are in a system that supports call cost limit.
The number of remaining units is shown during a call and in standby mode.
When the charging units have expired, the note Call cost limit reached is
displayed. Contact your service provider for information on the limited
charging mode and charging unit prices.
Cost shown as charging units or currency
You can set the phone to show the remaining talk-time in charging units
or units of currency. For this, you may need the PIN2 code. See “Security”
1
Select Options→ Settings→ Show costs in. The options are Currency
and Units.
2
If you choose Currency, a note requesting you to write the unit price
is shown. Key in the cost of your home system charging or credit unit
and press OK.
3
Write a name for the currency. Use a three-letter abbreviation, for
example, CAD.
Note: When no more charging units or currency units are left, calls may
only be possible to the emergency number programed into your
phone (such as 911 or other official emergency numbers).
[ 26 ]
Your phone
SET A CALL COST LIMIT FOR YOURSELF
3
1
Select Options→ Settings→ Call cost limit→ On.
2
The phone requests you to enter the limit in units. For this you may
need the PIN2 code. Depending on the Show costs in setting, enter
either the amount of charging units or currency.
When the charging limit you have set yourself is reached, the counter stops
at its maximum value and the note Reset all calls' cost counter is displayed.
To be able to make calls, go to Options→ Settings→ Call cost limit→ Off.
Erase call cost counters - Select Options→ Clear counters. For this you
need the PIN2 code. To clear an individual entry, scroll to it and press
.
GPRS data counter
Go to Log→ GPRS counter.
Allows you to check the amount of data sent and received during packet
data (GPRS) connections. For example, you may be charged for your GPRS
connections by the amount of data sent and received.
View the general log
Go to Menu→ Log and press
then
.
In the general log, for each communication event, you can see the sender or
recipient name, phone number, name of the service provider, or access point.
Note: Sub-events, such as a text message sent in more than one part and
packet data connections, are logged as one communication event.
Filter the log
1
2
Select Options→ Filter. A list of filters opens.
Scroll to a filter and press Select.
Erase the contents of the log
To erase all the log contents, Recent calls log, and
Messaging delivery reports permanently, select
Options→ Clear log. Confirm by pressing OK.
[ 27 ]
Packet data counter and connection timer
To view how much data, measured in kilobytes, has been transferred and how
long a certain GPRS connection has lasted, scroll to an Incoming or Outgoing
3
event with the access point icon
and select Options→ View details.
Icons
for incoming
for outgoing
for missed communication events
Log settings
Select Options→ Settings. The list of settings opens.
•
Log duration - The log events remain in the phone memory for a
set number of days after which they are automatically erased to
free memory.
If you select No log, all the log contents, Recent calls log, and
Messaging delivery reports are permanently deleted.
•
For Show call duration, Show costs in, Call costlimit, see the sections
‘Call duration’ and ‘Call costs (system service)’ earlier in this chapter.
• SIM FOLDER
Go to Menu→ SIM
Your SIM card may provide additional services that you can access
in this folder. See also “Copy contacts between the SIM card and phone
Options in the SIM directory are: Open, Call, New SIM contact, Edit, Delete,
Mark/UnMark, Copy to Contacts, Own numbers, SIM details, Help, and Exit.
Note: For availability, rates and information on using SIM services,
contact your SIM card vendor, e.g. system operator, service
provider or other vendor.
In the SIM directory, you can see the names and numbers stored on the
SIM card, you can add or edit them, and you can make calls.
[ 28 ]
Settings
4
4 Settings
• CHANGE GENERAL SETTINGS
Go to Menu→ Tools→ Settings.
1
Scroll to a setting group and press
open it.
to
2
Scroll to a setting you want to change
and press
to
•
switch between options if there are
only two (On/Off).
•
•
open a list of options or an editor.
open a settings slider such as the
Contrast setting. Press
or
to
increase or decrease the value.
Note: You may be able to receive some settings from your service
provider in a text message.
• PHONE SETTINGS
General
•
Phone language - You can change the language for the display texts in
your phone. This change will also affect the format used for date and
time and the separators used, for example, in calculations. There are
three languages installed in your phone. If you select Automatic, the
phone selects the language according to the information on your SIM
card. After you have changed the display text language, you must
restart the phone.
Note: Changing the settings for Phone language or Writing language
affects every application in your phone and the change remains
effective until you change these settings again.
[ 29 ]
•
Writinglanguage - You can change the writing language of your phone
permanently. Changing the language affects
4
•
•
•
the characters available when you press any key (
the predictive text dictionary used, and
-
),
the special characters that are available when you press the
and keys.
Tip: You can also make this change in some of the editors. Press
and
select Writing language:.
Example: You are using a phone where the display texts are
in English but you want to write all your messages in French.
After you change the language, the predictive text dictionary
searches for words in French and the most common special
characters or punctuation marks used in the French language
are available when you press the
and
keys.
•
Predictive text - Sets the predictive text input On or Off for all editors
in the phone. You can also change this setting when you are in an
editor. Press
and select Predictive text→ Predictive text on or Off.
Note: The predictive text dictionary is not available for all languages.
•
•
Welcome note or logo - Press
to open the setting. The welcome note
or logo is displayed briefly each time you switch on the phone. Select
Default if you want to use the default image or animation. Select Text
to write a welcome note (max. 50 letters). Select Image to select a
photo or picture from Images.
Orig. phone settings - You can reset some of the settings to their original
values. To do this, you need the lock code. After resetting the settings,
the phone may take a longer time to power on.
Note: All documents and files that you have created are left as they are.
Standby mode
•
Background image - Youcan select any image to be used asa background
image in standby mode. Select Yes to select an image from Images.
[ 30 ]
Settings
•
Left selection key and Rightselection key - You can change the shortcuts
4
that appear over the left
and right
selection keys
in standby mode. In addition to the applications, you can have the
shortcut point to a function, for example, New message.
Note: You cannot have a shortcut to an application that you have installed.
Display
•
•
•
Contrast - To change the contrast of the display to lighter or darker.
Color palette - To change the color palette used on the display.
Screen saver timeout - The screen saver is activated when the screen
saver time-out period is over. When the screen saver is active, the
display is cleared and you can see the screen saver bar.
To deactivate the screen saver press any key.
•
Screen saver - Select what is shown on the
screen saver bar: time and date or a text you
have written yourself. The location and
background color of the screen saver bar
changes in one minute intervals. Also, the
screen saver changes to indicate the number
of new messages or missed calls.
• CALL SETTINGS
Note: To change the settings for call forwarding, go to Menu→ Tools→
Call forwarding.
Send my caller ID
This system service allows you to set your phone number to be displayed
(Yes) or hidden (No) from the person to whom you are calling. Or, the value
may be set by your service provider when you make a subscription (Default).
[ 31 ]
Call waiting: (system service)
4
The system will notify you of a new incoming call while you have a call in
progress. Select Activate to request the system to activate call waiting,
Cancel to request the system to deactivate call waiting, or Check status, to
check if the function is active or not.
Automatic redial
When this setting is activated, your phone will make a maximum of ten
attempts to connect the call after an unsuccessful call attempt. Press
to stop automatic redialing.
Summary after call
Activate this setting if you want the phone to briefly display the duration
and cost of the last call. To show costs, the Call cost limit needs to be
activated for your SIM card.
1-touch dialing
Select On and the numbers assigned to the 1-touch dialing keys (
-
),
can be dialed by pressing and holding the key.
Anykey answer
Select On, and you can answer an incoming call by briefly pressing any
key, except
,
, and
.
Line in use (system service)
This setting is shown only if the SIM card supports two subscriber numbers,
that is, two phone lines. Select which phone line (Line1 or Line2) you want
to use for making calls and sending text messages. Calls on both lines can
be answered irrespective of the selected line.
Note: You will not be able to make calls if you select Line 2 and have not
subscribed to this system service.
To prevent line selection, select Line change→Disable if supported by your
SIM card. To change this setting, you need the PIN2 code supplied by your
service provider.
Tip: To switch between the phone lines, press and hold
in standby mode.
[ 32 ]
Settings
Voice message indicators:
, or is shown if you have one or several voice messages.
4
,
• CONNECTION SETTINGS
General information about data connections and
access points
To define settings for access points, go to Settings→ Connection settings→
Access points.
A data connection is required to connect to an access point. Your phone
supports three kinds of data connections:
•
•
•
a GSM data call ( ),
GSM high-speed data call ( ), or
packet data (GPRS) connection ( ).
There are three different kinds of access points that you can define: MMS
access point, browser access point, and Internet access point (IAP). Check
with your service provider for the kind of access point needed for the
service you wish to access. You need to set access point settings, if you
want to, for example,
•
•
•
•
•
•
send and receive multimedia messages,
send and receive e-mail,
browse pages,
TM
download Java applications,
use Image upload, or
use your phone as a modem.
Glossary: Access point - The point where your phone connects to
the Internet by way of a data call or packet data connection. An
access point can be provided, for example, by a commercial Internet
service provider (ISP), or service provider.
[ 33 ]
GSM DATA CALLS
4
A GSM data call enables data transmission rates to a maximum of
14.4 kbps. For availability and subscription to data services, contact
your service provider.
Minimum settings needed to make a data call
To insert a set of basic GSM data call settings, go to Settings→ Connection
settings→ Access points and select Options→ New access point. Fill in the
following: Data bearer: GSM data, Dial-up number, Session mode: Permanent,
Data call type: Analog, and Maximum data speed: Automatic.
High speed data call (High Speed Circuit Switched Data, HSCSD)
Glossary: High-speed data enables data transmission rates to a
maximum of 43.2 Kbps, which is three times faster than the standard
data rates of the GSM system. HSCSD is comparable to the speed
of many computer modems that communicate with today's fixed
telephone systems.
For availability and subscription to high-speed data services, please contact
your service provider.
Note: Sending data in HSCSD mode may drain the phone’s battery faster
than normal voice or data calls, as the phone may send data more
frequently to the system.
Tip: The Settings wizard program included in the PC Suite for Nokia 3650
or PC Suite for Nokia 3600 can help you to configure access point and
mailbox settings. You can also copy existing settings, for example,
from your computer to your phone. See the CD-ROM supplied in the
sales package.
PACKET DATA (GENERAL PACKET RADIO SERVICE, GPRS)
Glossary: Packet data, or General Packet Radio Service (GPRS), uses
packet data technology where information is sent in short bursts
of data over the mobile system. The benefit of sending data in
packets is that the system is occupied only when sending or
receiving data. Because GPRS uses the system efficiently, it allows
for quick data connection set up and fast data transmission speeds.
[ 34 ]
Settings
Minimum settings needed to make a packet data connection
4
•
You need to subscribe to the GPRS service. For availability and
subscription to GPRS, contact your service provider.
•
Go to Tools→ Settings→ Connection→ Access points and select
Options→ New access point→ Edit. Fill in the following: Data bearer:
GPRS and Access point name: enter the name given to you by your
service provider.
Pricing for packet data and applications
Both the active GPRS connection and the applications used over GPRS
require a fee (for example, using services, sending and receiving data, and
text messages). For more detailed information on fees, contact your
service provider.
Create an access point
Options in the Access points list are: Edit, New access point, Delete, Help,
and Exit.
You may have preset access point settings
in your Nokia 3600 series mobile phone. Or,
you may receive access point settings in a
smart message from a service provider.
If no access points are defined when you
open Access points, you will be asked if you
want to create one.
If access points are defined, to create a new
access point, select Options→ New access
point and select:
•
Use default settings to use the default settings. Make the needed
changes and press Back to save the settings.
•
Use existing settings to use existing setting information as the basis for
the new access point settings. A list of existing access points is opened.
Select one and press OK. Access point settings are opened with some
fields already filled.
[ 35 ]
Edit an access point
When you open Access points, the list of already available access points
4
opens. Scroll to the access point you want to edit, and press
.
Delete an access point
In the list of access points, scroll to the access point you want to remove
and select Options→ Delete.
Access points
Options when editing access point settings are: Change, Advanced settings,
Help, and Exit.
Here you can see a short explanation for every setting that may be needed
for different data connections and access points.
Note: Enter the settings from the top because depending on what data
connection you select (Data bearer) or whether you need to insert
a Gateway IP address, only certain setting fields are available.
Note: Follow the instructions given to you by your service provider
very carefully.
•
•
Connection name - Give a descriptive name for the connection.
Data bearer - The options are GSM data, High speed GSM, and GPRS.
Depending on what data connection you select, only certain setting
fields are available. Fill in all fields marked with Must be defined, or
marked with a red asterisk. Other fields can be left empty, unless you
have been instructed otherwise by your service provider.
Note: To use a data connection, the system service provider must
support this feature, and if necessary, activate it for your SIM card.
•
Access point name (for packet data only) - The access point name is
needed to establish a connection to the GPRS system. You obtain the
access point name from your service provider.
[ 36 ]
Settings
•
•
Dial-up number (for GSM data and high speed data only) - The modem
telephone number of the access point.
4
User name - Write a user name if required by the service provider. The
user name may be needed to make a data connection, and is usually
provided by the service provider. The user name is often case-sensitive.
Tip: When you are writing, press
Press to enter a space.
to open the special characters table.
•
Prompt password - If you must key in a new password every time you
log on to a server, or if you do not want to save your password to the
phone, choose Yes.
•
Password - A password may be needed to make a data connection, and
is usually provided by the service provider. The password is often case-
sensitive. When you are writing the password, the characters you enter
are shown briefly and then changed to asterisks (*). The easiest way
to enter numbers is to press
continue entering letters.
and select Insert number and then
•
•
•
Authentication - Normal / Secure.
Gateway IP address - The IP address used by required browser gateway.
Homepage - Depending on what you are setting up, write either:
•
•
the service address, or
the address of the multimedia messaging center.
Glossary: ISDN connections are a way to establish a data call
between your phone and your access point. ISDN connections are
digital from end to end and as such offer quicker set-up times and
faster data rates than analog connections. In order to use an ISDN
connection, both your service provider and your Internet service
provider must support it.
•
•
Connection security - Choose whether Transport Layer Security
(TLS) is used for the connection. Follow the instructions from your
service provider.
Session mode - Permanent / Temporary.
[ 37 ]
•
•
Data call type (for GSM data and high speed data only) - Analog,
ISDN v.110, or ISDN v.120 defines whether the phone uses an analog
or digital connection. This setting depends on both your GSM service
provider and Internet Service Provider (ISP), because some GSM systems
do not support certain types of ISDN connections. For details, contact
your ISP. If ISDN connections are available, they establish connections
more quickly than analog methods.
4
Maximum data speed (for GSM data and high speed data only) - The
options are Automatic / 9600 / 14400 / 19200 / 28800 / 38400 / 43200,
depending on what you have chosen in Sessionmode and Datacalltype.
This option allows you to limit the maximum connection speed when
high speed data is used. Higher data rates may cost more, depending
on the system service provider.
Note: The speeds above represent the maximum speed at which your
connection will operate. During the connection, the operating
speed may be less, depending on system conditions.
Glossary: DNS - Domain Name Service. An Internet service that
translates domain names such aswww.nokia.cominto IP addresses
like 192.100.124.195.
Options→ Advanced settings
•
•
•
Phone IP address - The IP address of your phone.
Primary name server: - The IP address of the primary DNS server.
Second name server: - The IP address of the secondary DNS server.
Note: If you need to enter the Phone IP address, Primary name server, or
Second name server contact your Internet service provider to obtain
these addresses.
The following settings are shown if you have selected data call and high
speed data as the connection type:
•
Use callback - This option allows a server to call you back once you
have made the initial call, so you have a connection without paying
for the call. Contact your service provider to subscribe to this service.
[ 38 ]
Settings
Note: Chargesmay apply for certaintypes of received calls, such as roaming
and high speed data calls. Contact your GSM service provider for
more information.
4
Note: The phone expects the callback call to use the same data call settings
that were used in the callback-requesting call. The system must
support this type of call in both directions, to and from the phone.
•
•
•
Callback type - The options are Use server no. / Use other no. Ask your
service provider for the correct setting; it will depend on the service
provider’s configuration.
Callback number - Key in your phone’s data phone number which the
dial back server uses. Usually, this number is the data call phone
number of your phone.
Use PPP compression - When set to Yes, this option speeds up the data
transfer, if supported by the remote PPP server. If you have problems
with establishing a connection, try setting this to No. Contact your
service provider for guidance.
Glossary: PPP (Point-to-Point Protocol) - a common networking
software protocol that enables any computer with a modem and
a phone line to connect directly to the Internet.
•
•
•
Use login script - The options are Yes / No.
Login script - Insert the login script.
Modem initialization (Modem initialization string)- Controls your phone
using modem AT commands. If required, enter characters specified by
your GSM system service provider or Internet service provider.
GPRS
Go to Menu→ Tools→ Settings→ Connection → GPRS.
The GPRS settings affect all access points using a packet data connection.
[ 39 ]
GPRS connection - If you select When available and you are in a system that
supports packet data, the phone registers to the GPRS system and sending
text messages will be done via GPRS. Also, starting an active packet data
connection, for example, to send and receive e-mail, is quicker. If you
select When needed, the phone will use a packet data connection only if
you start an application or action that needs it. The GPRS connection is
closed after it is not used by any application.
4
Note: If there is no GPRS coverage and you have chosen When available,
the phone will periodically try to establish a packet data connection.
Access point - The access point name is needed when you want to use your
phone as a packet data modem to your computer.
Data call
Go to Menu→ Tools→ Settings→ Connection settings→ Data call.
The Data call settings affect all access points using a data call and high
speed data call.
Online time - If there are no actions the data call is dropped automatically
after a time-out period. The options are User defined, in which case you
enter a time, or Unlimited.
• DATE AND TIME
Menu→ Tools→ Settings→ Date and time.
The date and time settings allow you to define the date and time used in
your phone, as well as change the date and time format and separators.
Choose Clock type→ Analog or Digital to change the clock shown in standby
mode. Choose Auto time update if you want the mobile phone system to
update time, date, and time zone information to your phone (system service).
Tip: For the Auto time update setting to take effect, the phone needs
to be restarted.
• SECURITY
Menu→ Tools→ Settings→ Security→ Phone and Sim
[ 40 ]
Settings
Phone and SIM
4
Explanations for the different security codes that may be needed:
•
PIN code (4 to 8 digits) - The PIN (Personal Identification Number)
code protects your SIM card against unauthorized use. The PIN code
is usually supplied with the SIM card. After three consecutive incorrect
PIN code entries, the PIN code is blocked. If the PIN code is blocked,
you need to unblock the PIN code before you can use the SIM card
again. See the information about the PUK code below.
•
•
PIN2 code (4 to 8 digits) - The PIN2 code, supplied with some SIM
cards, is required to access some functions, such as call cost counters.
Lock code (5 digits) - The lock code can be used to lock the phone
and keypad to avoid unauthorized use.
Note: The factory setting for the lock code is 12345. To avoid unauthorized
use of your phone, change the lock code. Keep the new code secret
and in a safe place separate from your phone.
•
PUK and PUK2 codes (8 digits) - The PUK (Personal Unblocking Key)
code is required to change a blocked PIN code. The PUK2 code is
required to change a blocked PIN2 code. If the codes are not supplied
with the SIM card, contact the operator whose SIM card is in your
phone for the codes.
You can change the following codes: lock code, PIN code, and PIN2 code.
These codes can only include the numbers from 0 to 9.
Note: Avoid using access codes similar to the emergency numbers, such
as 911, to prevent accidental dialing of the emergency number.
PIN code request - When the PIN code request is active, the code is requested
each time the phone is switched on. Note that deactivating the PIN code
request may not be allowed by some SIM cards.
PIN code / PIN2 code / Lock code - Open this setting if you want to change
the code.
Tip: To lock the phone manually, press . A list of commands opens.
Select Lock phone.
[ 41 ]
Autolock period - You can set an autolock period, a time-out after which
the phone is automatically locked and can be used only if the correct lock
code is entered. Key in a number for the time-out in minutes or select
None to turn off the autolock period.
4
Lock Code - To unlock the phone, key in the lock code.
Note: When the phone is locked, calls may be possible to the emergency
number programed into your phone (e.g. 911 or other official
emergency number).
Lock if SIM changed - Select Yes if you want the phone to ask for the lock
code when an unknown, new SIM card is inserted into your phone. The phone
maintains a list of SIM cards that are recognized as the owner’s cards.
Fixeddialing - You can restrict your outgoing calls to selected phone numbers,
if supported by your SIM card. You need the PIN2 code for this function.
When this function is active, you can only call those phone numbers that are
included in the fixed dialing list or which begin with the same digit(s) as a
phone number on the list.
To view the list of Fixed dialing numbers, go to Menu→ SIM→ Fixed dialing.
Options in the Fixed dialing view are:
Open, Call, New contact, Edit, Delete, Add to Contacts, Add from Contacts,
Help and Exit.
Note: When Fixed Dialing is turned on, calls may be possible to
certain emergency numbers in some systems (911 or other
official emergency numbers).
To add new numbers to the Fixed dialing list, select Options→ New
contact or Add from Contacts.
Closed user group (system service) - You can specify a group of people to
whom you can call and who can call you. For more information, contact
your service provider. Select: Default to activate the default group agreed
on with the service provider, On if you want to use another group (you
need to know the group index number), or Off.
Note: When calls are limited to Closed User Groups, calls may be possible
to certain emergency numbers in some systems (911 or other official
emergency numbers).
[ 42 ]
Settings
Confirm SIM services - To set the phone to display confirmation messages
when you are using a SIM card service.
4
Certif. management
Menu→ Tools→ Settings→ Security→ Cert. management
In the Certificate management main view, you can see a list of authority
certificates that have been stored in your phone. Press
user certificates, if available.
to see a list of
Options in the certificate management main view are:
Certificate details, Delete, Trust settings, Mark/Unmark, Help, and Exit.
Glossary:Digital certificates are used to verify the origin of browser
pages and installed software. However, they can only be trusted
if the origin of the certificate is known to be authentic.
Digital certificates are needed if you:
•
want to connect to an online bank, another site, or remote server for
actions that involve transferring confidential information, or
•
want to minimize the risk of viruses or other malicious software and
be sure of the authenticity of software when downloading and
installing software.
Glossary: Authority certificates are used by some services, such as
banking services, for checking signatures or server certificates or
other authority certificates.
Important: Although the use of certificates makes the risks involved in
remote connections and software installation considerably
smaller, they must be used correctly in order to benefit from
increased security. The existence of a certificate does not offer
any protection by itself; the certificate manager must contain
correct, authentic, or trusted certificates for increased security
to be available.
Glossary: User certificates are issued to users by a Certifying
Authority.
[ 43 ]
Viewing certificate details - checking authenticity
4
You can only be sure of the correct identity of a browser gateway or a
server when the signature and the period of validity of a browser gateway
or server certificate have been checked.
You will be notified on the phone’s display
•
•
if the identity of the browser server or gateway is not authentic or
if you do not have the correct security certificate in your phone.
To check certificate details, scroll to a certificate and select Options→
Certificate details. When you open certificate details, Certificate
management checks the validity of the certificate and one of the
following notes may appear:
•
Certificate not trusted - You have not set any application to use the
certificate. For more information, see the next section ‘Changing the
trust settings of an authority certificate’.
•
•
•
Expired certificate - The period of validity has ended for the selected
certificate.
Certificate not valid yet - The period of validity has not yet begun for
the selected certificate.
Certificate corrupted - The certificate cannot be used. Contact the
certificate issuer.
Important: Certificates have a restricted lifetime. If Expired certificate or
Certificate not valid yet is shown even if the certificate should
be valid, check that the current date and time in your phone
are correct.
Change the trust settings of an authority certificate
Scroll to an authority certificate and select Options→ Trust settings.
Depending on the certificate, a list of the applications that can use the
selected certificate is shown. For example:
Services / Yes - the certificate is able to certify sites.
Application manager / Yes - the certificate is able to certify the origin of
new software.
Internet / Yes - the certificate is able to certify e-mail and imaging servers.
[ 44 ]
Settings
Important: Before changing these settings, you must make sure that you
really trust the owner of the certificate and that the certificate
really belongs to the listed owner.
4
• CALL RESTRICTION (SYSTEM SERVICE)
Call restriction allows you to restrict the making and receiving of calls
with your phone. For this function, get the restriction password from your
service provider.
1
2
Scroll to one of the restriction options.
Select Options→ Activate to request the system to set call restriction
on, Cancel to set the selected call restriction off, or Check status to
check if the calls are restricted or not.
•
Select Options→ Edit restriction passw. to change the restriction
password.
•
Select Options→ Cancel all restrictions to cancel all active
call restrictions.
Note: When calls are restricted, calls may be possible to certain emergency
numbers in some systems (911 or other official emergency numbers).
Call restricting affects all calls, including data calls. You cannot
have restriction of incoming calls and call forwarding or fixed
dialing active at the same time.
• SYSTEM
Menu→ Tools→ Settings→ System
System selection
Choose Automatic to set the phone to automatically search for and select
one of the cellular systems available in your area, or
Choose Manual, if you want to select the desired system manually from a
list of systems. If the connection to the manually selected system is lost,
the phone will sound an error tone and ask you to select a system again.
The selected system must have a roaming agreement with your home
system, that is, the operator whose SIM card is in your phone.
[ 45 ]
Glossary: Roaming agreement - An agreement between two or
more system service providers to enable the users of one service
provider to use the services of other service providers.
4
Cell info display
Select On to set the phone to indicate when it is used in a cellular system
based on Micro Cellular Network (MCN) technology and to activate cell
info reception.
• ACCESSORY SETTINGS
Menu→ Tools→ Settings→ Accessory
Scroll to an accessory folder and open the settings:
•
•
Select Default profile to select the profile you want to be activated
each time when you connect a certain accessory to your phone.
Select Automatic answer to set the phone to answer an incoming call
automatically after five seconds time. If the Ringing option is set to
Beep once or Silent, automatic answer cannot be in use.
Note: If you are using a loopset, you need to activate it separately. Open
the Loopset folder and select Use loopset→ Yes. If you have activated
a loopset, the headset will use the same settings as the loopset.
Indicators shown in standby mode:
- a headset is connected.
- a loopset is connected.
[ 46 ]
Contacts
5
5 Contacts
To open Contacts, press
in standby mode or
go to Menu→ Contacts.
In Contacts, you can store and manage contact
information, such as names, phone numbers, and
addresses.
Contacts use shared memory. See “Shared
You can also add a personal ringing tone, voice
tag, or a thumbnail image to a contact card. You
can create contact groups, which allow you to send
text messages or e-mail to many recipients at the same time.
• CREATE CONTACT CARDS
1
Open Contacts and select Options→ New contact. An empty contact
card opens.
2
Fill in the fields you want and press Done. The contact card is saved
and closed, and appears in the Contacts directory.
• COPY CONTACTS BETWEEN THE SIM CARD AND
PHONE MEMORY
•
To copy names and numbers from a SIM card to your phone, go to
Menu→ SIM→ SIM directory. Select the name(s) you want to copy
and select Options→ Copy to Contacts.
•
If you want to copy a phone, fax, or pager number from Contacts to
your SIM card, go to Contacts, open a contact card, scroll to the
number, and select Options→ Copy to SIM direct.
[ 47 ]
• EDIT CONTACT CARDS
5
Options in the Contacts directory are: Open, Call, Create message, New
contact, Edit, Delete, Duplicate, Addtogroup, Belongs to groups, Mark/Unmark,
Send, Contacts info, Help, and Exit.
Options when editing a contact card are:
Add thumbnail / Remove thumbnail, Add detail, Delete detail, Edit label, Help,
and Exit.
1
In the Contacts directory, scroll to the contact card you want to edit
and press to open it.
2
3
To change the information on the card, select Options→ Edit.
To save your changes and to return to the contact card view, press Done.
Delete contact cards
In the Contacts directory, scroll to the contact card you want to delete
and select Options→ Delete.
To delete many contact cards
1
Mark the cards to be deleted. Scroll to a contact you want to delete and
select Options→ Mark. A check mark is placed beside the contact card.
2
When you have marked all the contacts you want to delete, select
Options→ Delete.
Tip: You can also mark many items if you press and hold
and
simultaneouslypress
Add and remove contact card fields
1
Open a contact card and select Options→ Edit.
2
To add an extra field, select Options→ Add detail.
To delete a field you do not need, select Options→ Delete detail.
To rename a contact card field label, select Options→ Edit label.
[ 48 ]
Contacts
Insert a picture in a contact card
5
There are two different types of pictures you can add to a contact card.
take and store pictures.
•
To attach a small thumbnail image to a contact card, open a contact
card, select Options→ Edit and then select Options→ Add thumbnail.
The thumbnail image is also shown when the contact is calling you.
•
To add an image to a contact card, open a contact card, and press
to open the image view (
Add image.
). To attach an image, select Options→
• OPTIONS WHEN VIEWING A CONTACT CARD
Contact information view ( ) shows all
information inserted in the contact card. Press
to open the Image view
.
Note: Only fields that have information are
displayed in the contact information view.
Select Options→ Edit if you want to see
all fields and add more data to the
contact.
Options when viewing a contact card (some are shown only when the
selection is on a phone number) are: Call, Create message, Edit, Delete,
Defaults, Add voice tag / Voice tags, Assign 1-touch dial / Remove 1-touch dial,
Ringing tone, Copy to SIM direct., Send, Help, and Exit.
Assign default numbers and addresses
If a contact has several phone numbers or e-mail addresses, to speed up
calling and sending messages, you can define certain numbers and addresses
to be used as the default.
Open a contact card and select Options→ Defaults. A pop-up window
opens, listing the different options.
[ 49 ]
Example: Scroll to Phone number and press Assign. A list of phone
numbers in the selected contact card is shown. Scroll to the one
5
you want to have as the default and press
. When you return
to the contact card view, you can see the default number underlined.
Voice dialing
You can make a phone call by saying a voice tag that has been added to
a contact card. Any spoken word(s) can be a voice tag. Before using voice
dialing, note that:
•
•
•
Voice tags are not language dependent. They are dependent on the
speaker's voice.
Voice tags are sensitive to background noise. Record them and make
calls in a quiet environment.
Very short names are not accepted. Use long names and avoid similar
names for different numbers.
Example: You can use a person’s name for a voice tag, for example,
“John’s cell”.
Note: You must say the name exactly as you said it when you recorded
it. This may be difficult in, for example, a noisy environment or
during an emergency, so you should not rely solely upon voice
dialing in all circumstances.
ADD A VOICE TAG TO A PHONE NUMBER
Glossary: Voice tags can be any spoken words, for example, a
person’s first name. Voice tags allow you to make phone calls by
simply saying the word aloud.
1
2
In the Contacts directory, scroll to the contact to which you want to
add a voice tag and press to open the contact card.
Scroll to the number to which you want to add the voice tag and
select Options→ Add voice tag.
Note: You can have only one voice tag per contact card. Voice tags can only
be added to phone numbers stored in the phone’s memory. See “Copy
[ 50 ]
Contacts
3
The text Press Start, then speak after tone is displayed.
5
When recording, hold the phone at a short distance away from your
mouth. After the starting tone, say clearly the word(s) you want to
record as a voice tag.
•
Press Start to record a voice tag. The phone sounds a starting
tone and the note Speak now is displayed.
•
Press Quitto return to the contact card. After the starting tone, say
clearly the word(s) you want to record as a voice tag.
4
5
After recording, the phone plays the recorded tag and the note Playing
voice tag is displayed. If you do not want to save the recording, press Quit.
When the voice tag has been successfully saved, the note Voice tag
saved is displayed and a beep sounds. A symbol
can be seen next
to the number in the contact card.
Note: Your phone may have 30 phone numbers to which voice tags are
attached. If the memory becomes full, delete some of the voice tags.
Tip: To view a list of voice tags you have defined, select Options→
Contacts info→ Voice tags in the Contacts directory.
MAKE A CALL BY SAYING A VOICE TAG
Note: You must say the voice tag exactly as you said it when you recorded it.
1
In standby mode, press and hold
. A short tone is played and
the note Speak now is displayed.
2
When you are making a call by saying a voice tag, the loudspeaker is
in use. Hold the phone a short distance away from your mouth and
face and say the voice tag clearly.
3
The phone plays the original voice tag, displays the name and number,
and after 1.5 seconds dials the number of the recognized voice tag.
If the phone plays the wrong voice tag or to retry voice dialing, press Retry.
Note: When an application using a data call or GPRS connection is sending
or receiving data, you cannot make a call by using voice dialing. To
make a call by using a voice tag, end all active data connections.
[ 51 ]
REPLAY, ERASE, OR CHANGE A VOICE TAG
5
To replay, erase, or change a voice tag, open a contact card and scroll to
the number that has a voice tag (indicated by ) and select Options→
Voice tag→ then either
•
•
•
Playback - to listen to the voice tag again, or
Delete - to erase the voice tag, or
Change - to record a new voice tag instead of the old one.
Press Start to record.
Assign 1-touch dialing keys
1-touch dialing is a quick way to call frequently
used numbers. You can assign 1-touch dialing
keys to eight phone numbers. Number 1 is
reserved for the voice mailbox.
1
Open the contact card for which you want
a 1-touch dialing key and select Options→
Assign 1-touch no. The 1-touch dialing grid
opens, showing you the numbers from 1-9.
2
Scroll to a number and press Assign. When
you return to the contact information view,
you can see the 1-touch dial icon ( *) next to the number.
To call the contact by 1-touch dialing, go to standby mode and press the
1-touch dialing key and . If the 1-touch dialing function is set to On:
Press and hold the corresponding 1-touch dialing key until the call is started.
Add a ringing tone for a contact
card or group
You can set a ringing tone for each contact card
and group. When that contact or group member
calls you, the phone plays the chosen ringing tone
(if the caller’s telephone number is sent with the
call and your phone recognizes it).
[ 52 ]
Contacts
1
Press
contact group.
to open a contact card or go to the Groups list and select a
5
2
3
Select Options→ Ringing tone. A list of ringing tones opens.
Use the scroll key to select the ringing tone you wish to use for the
contact or group and press Select.
To remove the ringing tone, select Default tone from the list of ringing tones.
Note: For an individual contact, the phone will always use the ringing
tone that was assigned last. So, if you first change a group ringing
tone and then the ringing tone of a single contact that belongs to
that group, the ringing tone of the single contact will be used when
the contact calls you the next time.
Tip: To listen to a ringing tone, go to Recorder.
Send contact information
1
In the Contacts directory, scroll to the card you want to send.
2
Select Options→ Send then select the method, the choices are: Via
text message, Via e-mail (available only if the correct e-mail settings
are in place), via Infrared, or via Bluetooth. The contact card you want
to send has now become a “business card”. For further information,
You can add received business cards to your Contacts directory. See
“Receive smart messages” on page 85 for further information.
Glossary: When you send or receive contact information, the term
‘business card’ is used. A business card is a contact card in a format
suitable to be sent in a text message, usually in ‘vCard’ format.
• MANAGE CONTACT GROUPS
Options in the Groups list view are:
Open, New group, Delete, Rename, Ringing tone, Contacts info, Help, and Exit.
[ 53 ]
You can create contact groups, which can, for example, be used as
distribution lists for sending text messages and e-mail. See also “Add a
5
Create contact groups
1
2
3
In the Contacts directory, press
to open the Groups list.
Select Options→ New group.
Write a name for the group or use the default name Group and press OK.
Add members to a group
1
In the Contacts directory, scroll to the contact
you want to add to a group and select
Options→ Add to group:. A list of available
groups opens.
2
Scroll to the group to which you want to
add the contact and press
.
ADD MULTIPLE MEMBERS AT A TIME
1
2
In the Groups list, open a group and select
Options→ Add members.
Scroll to a contact and press
to mark it. Repeat this action on
all the contacts you want to add and press OK to add them to the
selected group.
Remove members from a group
1
2
3
Go to the Groups list, scroll to the group you want to modify, and
press
.
Scroll to the contact you want to remove and select Options→
Remove from group.
Press Yes to remove the contact from the group.
[ 54 ]
Camera and Images
6
6 Camera and Images
Withthe camerayoucantake pictures of people
or events while on the move. The pictures are
automatically saved in the Images application,
where you can rename them and organize them
in folders. You can also send photos to your
friends in a multimedia message, as an e-mail
attachment, or via a Bluetooth or infrared
connection. The camera produces JPEG pictures.
Press Camera in standby mode or go to
Menu→ Camera.
Options before taking a picture are: Capture, Go to Images, Settings, Help,
and Exit.
Glossary: JPEG is a standardized image compression format. JPEG
files can be viewed with the most common image viewers, image
editors, and Internet browsers. You can recognize these files by
their *.jpeg extension.
• TAKE PICTURES
Note: Your phone must be switched on to use this function. Do not switch
the phone on when wireless phone use is prohibited or when it
may cause interference or danger.
1
Press Camera in standby mode. The Camera application opens and
you can see the view to be captured.
You can see the viewfinder and the cropping lines, which show you
the image area to be captured. You can also see the image counter,
which shows you how many images, depending on the selected image
quality, fit in the memory of your phone.
2
To take a picture, press
.
[ 55 ]
Note: Do not move the phone before the Camera application starts to
save the photo. The photos are saved automatically in the Images
application. The Camera goes into battery saving mode within a
minute if there have been no key presses. To continue taking
6
pictures, press
.
After the image has been saved:
•
•
If you do not want to save the photo in the Images application
select Options→ Delete.
To return to the viewfinder to take a new picture, press
.
Options after a picture has been taken are: New image, Delete, Send,
Rename image, Go to Images, Settings, Help, and Exit.
Important: Obey all local laws governing the taking of pictures. Do not
use this feature illegally.
Settings
In the Camera application settings, you can adjust the image quality setting
and change the default image name.
1
2
Select Menu→ Camera→ Options→ Settings.
Scroll to the setting you want to change:
•
Image quality - High, Normal, and Basic. The better the image
quality, the more memory the image consumes. See also “Images
•
Default image name - By default, Camera names photos in the
format ‘Image.jpg’. Default image name allows you to set a name
for the pictures taken.
Example: If you set ‘Beach’ as the default image name, Camera
will name all the pictures you take ‘Beach’, ‘Beach(01)’, ‘Beach(02)’,
and so on, until you change the setting.
•
Memory in use - Select whether you want to store your images in
the phone memory or the memory card, if you use one.
[ 56 ]
Camera and Images
CAMERA MODE AFFECTS IMAGE SIZE AND ORIENTATION
With the different Camera modes, you can affect the size and orientation
6
of the picture to be taken. When you are taking a picture, press
to change between the different modes. Choose:
or
•
•
Standard when you want to take normal landscape pictures,
Portrait when you want to take a smaller icon-sized, vertical
picture, which can be added to a contact card, or
•
Night when the lighting is dim and the Camera needs a longer
exposure time for the picture to be of good quality. Note that, in
dim conditions, any movement while taking a picture may cause
it to get blurred. The image size and orientation is the same for
Standard and Night.
Tip: Try out the different Camera modes to see how they affect the
picture taken.
Standard, Portrait, and Night modes
•
When you are taking a picture in Standard or Night mode, the
viewfinder resolution is 160x120 pixels and 80x96 for Portrait mode.
•
The images taken in Standard or Night mode are saved in 640x480
pixel (VGA) format and those taken in Portrait mode are saved in
80x96 pixel format.
[ 57 ]
•
When you are viewing images, they are scaled to fit the display, which
has 176x208 pixels. This means that Standard and Night mode pictures
will appear more detailed when viewed on a higher resolution screen,
for example, a computer or when zoomed in Images.
6
Glossary: Resolution - A measure for the sharpness and clarity of
an image. Resolution refers to the number of dots (pixels) in an
image or a display. The more pixels there are, the more detailed
the picture is. Resolution is usually measured in pixels, for example,
640x480=300 kilopixels (kpix)=0.3 megapixels (Mpix).
IMAGES AND MEMORY CONSUMPTION
Your phone has 3.4 MB (megabytes) of free memory for images, contact
information, calendar, messages, and so on. See “Shared memory” on page
18. Portrait images (always taken in High quality) are so small that they
take up very little memory. Images taken using the High quality setting
and those taken in Night mode take up the most memory.
If 1 MB of memory is used for images only, it would fit approximately 22
Normal quality images taken in Standard mode. In the table below, you
can see approximately how many images would fit in 1 Mb of memory.
Image quality
Basic
Normal
High
Image type
Standard
Night
55
50
-
22
25
-
15
18
Portrait
>300
Tip: By using a memory card with your phone you can increase the
number of images you can store.
[ 58 ]
Camera and Images
• STORE PICTURES IN IMAGES
6
Go to Menu→ Images.
Note: Your phone must be switched on to
use this function. Do not switch the
phone on when wireless phone use is
prohibited or when it may cause
interference or danger.
Images allows you to view, organize, delete,
and send photos and pictures stored in your
phone. In Images you can organize images:
•
•
taken with the camera,
sent to your Inbox in a multimedia or a picture message, as an e-mail
attachment, via an infrared or Bluetooth connection. After receiving
the image in Inbox, you need to save it in Images.
In the Images main view, you can see a list of photos and folders.
The list shows:
•
•
•
•
the date and time a photo or an image was taken or saved,
a small thumbnail picture, a preview of the image, and
the number of images inside a folder, and
a tab showing whether the photos or folders are located in the phone’s
memory or the memory card, if you use one.
Options in Images are: Open, Send, Image uploader, Delete, Move to folder,
New folder, Mark/Unmark, Rename, Receive via infrared (only from a digital
camera that supports the IrTran-P protocol, otherwise use the Infrared
thumbnails, Help, and Exit.
[ 59 ]
View images
6
Note: When you open Images and you use a memory card, the starting tab
is determined by which memory is selected as the Memory in use.
1
2
3
Press
To browse the images, press
Press , to open an image. When the image is open, you can see the
or
to move from one memory tab to another.
and
.
name of the image and the number of images in the folder on the top
of the display.
When you are viewing an image, pressing
or previous picture in the current folder.
or
takes you to the next
You can view animated GIF files in the same way as other images. Animations
are played only once. When an animation stops, you will see a fixed image.
To view the animation again, you must close it and then reopen it.
Options when viewing an image are: Send, Rotate, Zoom in, Zoom out, Full
screen, Delete, Rename, View details, Add to Favorites, Help, and Exit.
ZOOM IN OR ZOOM OUT
1
Select Options→ Zoom in or Zoom
out. You can see the zooming ratio
at the top of the display. See also the
this chapter.
2
Press Back to return to the initial view.
Note: The zoom ratio is not stored
permanently. You cannot zoom
in on GIF animations while they
are playing.
Full screen
When you select Options→ Full screen, the panes around the picture are
removed so that you can see more of the image. Press
the initial view.
to go back to
[ 60 ]
Camera and Images
Move the focal point
6
When you are zooming or viewing an image in full screen mode, use the
scroll key to move the focal point to the left, right, up, or down, so that
you can take a closer look at one part of the picture, for example, its upper
right corner.
Rotate
Select Options→ Rotate→ Left or to rotate an image 90 degrees
counterclockwise or Right to rotate the image clockwise. The rotation
status is not stored permanently.
KEYBOARD SHORTCUTS
•
Rotate:
- zoom in,
normal view.
- change between full screen and normal view.
- counterclockwise,
- clockwise.
•
- zoom out, press and hold to return to the
•
IMAGE DETAILS VIEW
To view the detailed information about an image, scroll to the image and
select Options→ View details. A list of image information appears:
Format - JPEG, GIF, PNG, TIFF, MBM, BMP, WBMP, OTA, WMF,
Unsupported, or Unknown.
Date and Time - when the image was created or saved, n x n- the size
Resolutn. - the size of the image in pixels. See the glossary explanation,
Size - in bytes or kilobytes (kB),
Color - True color, 65536 colors, 4096 colors, 256 colors, 16 colors,
Grayscale, or Black/white.
Arrange images and folders
•
To remove an image or folder, scroll to it and select Options→ Delete.
[ 61 ]
•
To rename an image or a folder, scroll to the image or folder you want
6
to rename and select Options→ Rename. Write the new name and
press
.
See “Actions common to all applications” on page 15 for further information
on how to create folders and mark and move items to folders.
Send images
You can send photos or images via different messaging services.
1
2
Scroll to the image you want to send and select Options→ Send.
Then select the method, the choices are Via multimedia, Via e-mail, Via
infrared, and Via Bluetooth.
•
Ifyouselect to send the image inane-mail or amultimedia message,
an editor opens. Press to select the recipient(s) from the
Contacts directory or write the phone number or e-mail address
of the recipient in the To: field. Add text or sound and select
•
If you want to send the image via infrared or Bluetooth, see “Send
infrared” on page 140 for more information.
Picture messages folder
Options in the Picture messages folder are: Open, Send, Delete, Mark/
Unmark, Rename, View details, Help, and Exit.
In the Picture messages folder, you can find graphics sent to you in
picture messages.
If you want to save a graphic you have received in a picture message, go to
Messaging→ Inbox, open the message, and select Options→ Save picture.
VIEW PICTURES
1
Scroll to the picture you want to view and press
Press to view the next picture in the folder.
. The picture opens.
2
Press Back to return to the Pictures main view.
[ 62 ]
Video recorder
7
7 Video recorder
Go to Menu→ Video recorder.
Note: Obey all local laws governing the taking of videos. Do not use this
feature illegally. Your phone must be switched on to use the Video
recorder. Do not switch the phone on when wireless phone use is
prohibited or when it may cause interference or danger.
With the Video recorder you can record video clips, and play video clips stored
on your phone or on a memory card. Also, the Video recorder is integrated
with the messaging features allowing you to easily send created clips.
• RECORD A VIDEO CLIP
Glossary: 3GPP file format (.3gp) is the standard video file format
for Multimedia Messaging.
You can record video clips up to 95 kB in size,
or approximately 15 seconds in duration.
Recorded video clips are in the .3gp format.
1
To begin recording open the Video
recorder and select Options→ Record
and you can see the view to record.
2
To start recording press
.
The progress bar on the bottom of the
screen shows you how much recording
time remains. To pause recording at any
time press
.
To immediately play the video clip you just recorded, press
.
The video clip is saved to either the phone’s memory or the memory card,
Options in video clip view of Video recorder are: Play, Record, Send,
Delete, Rename, Settings, About product, Help, and Exit.
[ 63 ]
• WATCH A VIDEO CLIP
7
To watch a video clip from the Video recorder video clip list:
1
2
Open the Video recorder.
Scroll to a video clip and select Options→ Play.
Once a video clip is playing, you have similar options available to you as
when playing a video clip in ‘RealOne Player™’. The exception is volume
control, as Video recorder does not record sound. See “Video recorder” on
page 63.
Send video clips
You can send video clips by using the Send
option from your video clip list.
1
Scroll to the video clip you want to send
and select Options→ Send.
2
Select one of the four ways you have of
sending your video clip, Via multimedia,
Via e-mail, Via Bluetooth, or Via infrared.
Set up your Video recorder
You can define whether you store your video clips in the phone’s memory
or on the memory card, if you have one, and how to name your video clips.
Select Options→ Settings.
•
•
Memory in use - Choose between Phone memory and Memory card.
Default video name - Define the default name of your video clips.
Example: If you set ‘Holiday’ as the default video clip name, Video recorder
will name all the video clips you take ‘Holiday’, ‘Holiday(01)’, ‘Holiday(02)’,
and so on, until you change the setting again.
[ 64 ]
RealOne Player™
8
8 RealOne Player™
Go to Menu→ RealOne Player.
With the RealOne Player you can play media
files stored in the phone’s memory or on a
memory card, or play music and video files
and stream live content from the internet.
Options in list view are: Play, Open, Rename,
Delete, Newfolder, Movetofolder, Mark/Unmark,
Send, Add to Favorites, Settings, About product
Help, and Exit.
Glossary: Media files are video, music
or audio clips which you can play on a media player like the RealOne
Player. Files with extensions .3gp, .mp4, .amr, .rm, .ram, .ra and .rv.
are supported by the RealOne Player.
• PLAY MEDIA FILES
You can play any music or video file from the
list shown when you start the RealOne Player,
or directly from the internet.
To play a media file stored in your phone’s
memory or memory card, openRealOne Player,
scroll to the file and select Options→ Play.
Glossary: Streaming is playing sound
or video in real time as it is downloaded
from the internet, as opposed to
storing it in a local file first.
[ 65 ]
To play a media file directly, or stream live content from the internet:
8
1
2
Select Options→ Open→ URL address.
Enter the URL of the site you want to play
or stream content from.
Before your media file or stream begins playing,
your phone will connect to the site and load
the file.
Note: You cannot connect to a site unless you
have configured an Access Point, see
Glossary: Buffering is the temporary storage of a part of your
streaming content into the phone’s memory before it is played.
Media guide
From your RealOne Player you can open a browser page containing a media
guide with links to streaming media sites and files.
To view the media guide, open RealOne Player and select Options→
Open→ Guide.
Volume control
•
•
•
To increase the volume press
, or to decrease the volume press
and hold until the indicator is displayed.
and hold until you see the indicator.
.
To mute the sound press
To turn on the sound press
• SEND MEDIA FILES
You can send media files by using the Send option from your video clip
options list.
1
2
Scroll to the file you want to send and select Options→ Send.
Select one of the three ways you have of sending your file, Viainfrared,
Via Bluetooth or Via multimedia.
[ 66 ]
RealOne Player™
• CHANGE THE SETTINGS
8
Menu→ RealOne Player→ Options→ Settings
To change the Video settings, select Video to open the following list of
settings:
•
Video quality - Choose Sharp images to have better picture quality, but
slower framerate, or High framerate for faster framerate, but lower
picture quality.
•
Automatic scaling - Choose On to have automatic resizing of the
video image.
To change the Playback settings, select Playback to open the following
setting:
•
Repeat - Choose On to have the playing video or audio file restart
automatically once it has finished.
To change the Network settings, select Network to open the following list
of settings:
•
•
•
Bandwidth - Choose Automatic to have the best delivery rate available.
Maximum bandwidth - Choose the maximum bandwidth for streaming
content.
•
•
•
Connection time-out - Open the slider view to change the waiting time
for the initial server connection on a streaming session.
Server time-out - Open the slider view to change the time allowed for
no response from the server.
Lowest Port or Highest Port - Choose the port which is available for
streaming. If not sure of the number, ask your service provider.
To change the Proxy settings, select Proxy to open the following list of
settings:
•
Use Proxy / Host address / Port - Choose whether a proxy is used.
[ 67 ]
Tip: When you select one of the settings a tab view is opened. Press
or to move between the different setting tabs. The following
8
icons indicate which setting you are in:
for Video
for Playback
for Network, and
for Proxy.
[ 68 ]
Messaging
9
9 Messaging
Note: Your phone must be switched on to use the functions in the
Messaging folder. Do not switch the phone on when wireless phone
use is prohibited or when it may cause interference or danger.
Go to Menu→ Messaging
Options in the Messaging main view: Create message, Connect (shown if
you have defined settings for the mailbox), or Disconnect (shown if there
is an active connection to mailbox), SIM messages, Cell broadcast, Service
commands, Settings, Help, and Exit.
In Messaging you can create, send, receive, view, edit, and organize:
•
•
•
•
text messages,
multimedia messages,
e-mail messages, and
smart messages, special text messages containing data.
In addition to these, you can receive messages and data via an infrared or
Bluetooth connection, receive service messages, cell broadcast messages
as well as send service commands.
Text and multimedia messages use shared memory. See “Shared memory”
When you open Messaging, you can see the New message function and a
list of default folders:
Inbox - contains received messages except e-mail and cell broadcast
messages. E-mail messages are stored in the Mailbox. You can read cell
broadcast messages by selecting Options→ Cell broadcast.
My folders - for organizing your messages into folders.
Tip: Organize your messages by adding new folders under My folders.
Tip: When you have opened one of the default folders, for example, Sent, you
can easily move between the folders: by pressing
to open the next
folder (Outbox), or by pressing to open the previous folder (Drafts).
[ 69 ]
Mailbox - When you open this folder, you can either connect to your
remote mailbox to retrieve your new e-mail messages or view your previously
online and offline modes. After you have defined settings for a new mailbox,
9
Drafts - stores draft messages that have not been sent.
Outbox - is a temporary storage place for messages waiting to be sent.
Sent - stores the last 15 messages that have been sent. To change
the number of messages to be saved, see “Settings for the Sent folder” on
Reports- you can request the system to send you a delivery report
of the text messages, smart messages, and multimedia messages you have
sent. To turn on delivery report reception, select Options→ Settings→ text
message or Multimedia message, scroll to Receive report, and select Yes.
Note: Receiving a delivery report of a multimedia message that has been
sent to an e-mail address might not be possible.
Note: Before you can create a multimedia message, write an e-mail, or
connect to your remote mailbox, you must have the correct
connection settings in place. See “Settings needed for e-mail” on
• MESSAGING - GENERAL INFORMATION
The message status is always either draft, sent, or received. Messages can
be saved to the Drafts folder before they are sent. Messages are temporarily
placed in Outbox to wait for sending. After a message has been sent, you
can find a copy of the message in the Sent folder. Received and sent messages
are in read-only state until you select Reply or Forward, which copies the
message to an editor. Note that you cannot forward e-mail messages sent
by you.
Note: Messages or data that have been sent via an infrared or Bluetooth
connection are not saved in the Draft or Sent folders.
[ 70 ]
Messaging
Open a received message
9
When you receive a message,
and the note 1 new message is shown in
standby mode. Press Show to open the message.
If you have more than one new message, press Show to open the Inbox to
see the message headings. To open a message in Inbox, scroll to it and
press
.
Add a recipient to a message
When you create a message, there are several ways to add a recipient:
1
Add recipients from the Contacts directory. To open the Contacts
directory, press or in the To: or Cc: fields, or select Options→
Add recipient. Scroll to a contact and press to mark it. You can
mark several recipients at a time. Press OK to return to the message.
The recipients are listed in the To: field and automatically separated
with a semicolon (;).
2
3
Write the phone number or e-mail address of the recipient in the
To: field, or
Copy the recipient information from another application and then
Press
to the left of the cursor if you want to delete a recipient.
Note: If you write many phone numbers or e-mail addresses in the To: field,
you must remember to add a semicolon (;) between each item to
separate them from each other. When you retrieve recipients from
the Contacts directory, the semicolon is added automatically.
Example: 214 123 456; 972 456 876
Sending options
To change how a message is sent, select Options→ Sending options when
you are editing a message. When you save the message, its sending settings
are also saved.
[ 71 ]
• WRITE TEXT
9
You can key in text in two different ways, using the method traditionally
used in mobile phones or another method called predictive text input.
Icons:
and
means that the first letter in the message, or the
first letter of the next word, is written in upper case, and
indicate the selected case.
all other letters are written in lower case.
number mode.
indicates
Use traditional text input
The indicator
is shown on the top right of the display when you
are writing text using traditional text input.
•
Press a number key (
-
), repeatedly until the desired character
appears. Note that there are more characters available for a number
key than are printed on the key.
•
•
To insert a number, press and hold the number key.
To switch between letter and number mode, press and hold
.
If the next letter is located on the same key as the present one, wait
until the cursor appears (or press
then key in the letter.
to end the time-out period), and
•
•
If you make a mistake, press
to remove a character. Press and hold
to clear more than one character.
The most common punctuation marks are available under
repeatedly to reach the desired punctuation mark.
. Press
Press
to open a list of special characters. Use the scroll key to move
through the list and press OK to select a character.
•
•
To insert a space, press
three times.
. To move the cursor to the next line, press
To switch between upper and lower case, press
.
Tip: To turn predictive text input on or off, press
twice quickly when
writing text.
[ 72 ]
Messaging
Use predictive text input
9
To activate predictive text input, press
and select Predictive text on. This will activate
predictive text input for all editors in the
phone. The
indicator is shown at the
top of the display.
1
Write the desired word by pressing the
keys . Press each key only once
-
for one letter. The word changes after
every key press.
Note: Do not pay attention to what appears on the display. The word
match is evolving. Wait until you have keyed in the whole word
before you check the result.
For example, to write ‘Nokia’ when English dictionary is selected, press
for N,
for o,
for k,
for i, and
for a.
As you can see, the word suggestion changes after each key press.
2
When you have finished the word, check that it is correct.
•
If the word is correct, you can confirm it by pressing
to insert a space. The underlining disappears and you can begin
to write a new word.
or by pressing
•
If the word is not correct, you have the following options:
•
Press
repeatedly to view the matching words the dictionary
has found one by one.
•
Press
and select Predictive text→ Matches to view a list of
matching words. Scroll to the word you want to use and press
to select it.
•
If the ? character is shown after the word, the word you intended to
write is not in the dictionary. To add a word to the dictionary, press
Spell, key in the word (max. 32 letters) using traditional text input, and
press Save. The word is added to the dictionary. When the dictionary
becomes full, a new word replaces the oldest added word.
[ 73 ]
•
To remove the ? and clear characters one by one from the word,
press
9
.
TIPS ON USING PREDICTIVE TEXT INPUT
•
To erase a character, press
one character.
. Press and hold
to clear more than
•
To change between the different character cases Abc, abc, and ABC,
press . Note that if you press
input is turned off.
quickly twice the predictive text
•
•
To insert a number in letter mode, press and hold the desired number key.
Or press
and select Insert number, key in the numbers you want,
and press OK.
To switch between letter and number mode, press and hold
.
The most common punctuation marks are available under
. Press
and then
repeatedly to reach the desired punctuation mark.
Press and hold
to open a list of special characters. Use the scroll
key to scroll through the list and press OK to select a character. Or
press and select Insert symbol.
Tip: The predictive text input will try to guess which commonly used
punctuation mark (.,?!‘) is needed. The order and availability of the
punctuation marks depend on the language of the dictionary.
•
Press
repeatedly to view the matching words the dictionary has
found one by one.
You can also press
, select Predictive text and select:
•
•
Matches - to view a list of words that correspond to your key presses.
Scroll to the desired word and press the
.
Insert word - to add a word (max. 32 letters) to the dictionary by using
traditional text input. When the dictionary becomes full, a new word
replaces the oldest added word.
•
Edit word - to open a view where you can edit the word, available only
if the word is active (underlined).
[ 74 ]
Messaging
Write compound words
Write the first half of a compound word and confirm it by pressing
9
.
Write the last part of the compound word and complete the compound
word by pressing
Turn off predictive text
Press
to add a space.
and select Predictive text→ Off to turn predictive text input off
for all editors in the phone.
Editing options
When you press
, the following options appear (depending on the
editing mode and situation you are in):
•
Predictive text (predictive text input), Alpha mode (traditional text
input), Number mode.
•
•
Cut, Copy - available only if text has been selected first.
Paste - available only when text has been either cut or copied to
the clipboard.
•
•
Insert number, Insert symbol, and
Writing language - changes the input language for all editors in the
COPY TEXT
If you want to copy text to the clipboard, the following are the easiest
methods:
1
To select letters and words, press and hold
press or . As the selection moves, text is highlighted.
To select lines of text, press and hold . At the same time
press or
. At the same time,
.
2
3
To end the selection, stop pressing the scroll key.
To copy the text to clipboard, while still holding
, press Copy.
Or, release
and then press it once to open a list of editing commands,
for example, Copy or Cut.
If you want to remove the selected text from the document, press
.
[ 75 ]
4
To insert the text into a document, press and hold
Or, press once and select Paste.
and press Paste.
9
• CREATE AND SEND NEW MESSAGES
Note: When sending messages, your phone may display the wordsMessage
Sent. This is an indication that the message has been sent by your
phone to the message center programmed into your phone. This is
not an indication that the message has been received at the intended
destination. For more details about the messaging service, check
with your service provider.
You can start to create a message in two ways:
•
By selecting New message→ Create:→
text message, Multimedia message, or
E-mail in the Messaging main view, or
•
Start to create a message from an
application that has the option Send.
In this case the file that was selected
(such as an image or text) is added to
the message.
Write and send text messages
Options in the picture message editor are: Send, Remove picture, Add
recipient, Delete, Insert, Message details, Help, and Exit.
1
2
Select New message. A list of message options opens.
Select Create:→ text message. The editor opens with the cursor in the
To: field. Press
write the phone number of the recipient. Press
(;) to separate each recipient. Press
to select recipient(s) from the Contacts directory or
to add a semicolon
to move to the message field.
3
Write the message.
Note: Your phone supports sending of multiple text messages at the same
time, therefore, the normal 160 characters limit for one text message
can be exceeded. If your text exceeds 160 characters, it will be sent
in two or more messages and message sending may cost you more.
[ 76 ]
Messaging
In the navigation bar, you can see the message length indicator counting
backwards from 160. For example, 10 (2) means that you can still add
10 characters for the text to be sent as two messages.
9
4
To send the message, select Options→ Send or press
.
SEND SMART MESSAGES
Options in the text message editor are: Send, Add recipient, Insert, Delete,
Message details, Sending options, Help, and Exit.
Smart messages are special text messages that can contain data. You can
send smart messages such as:
•
•
•
picture messages,
business cards containing contact information in generic (vCard) format,
Calendar notes (vCalendar format).
Tip: You can also receive ringing tones, operator logos, or settings from
service providers.
CREATE AND SEND PICTURE MESSAGES
Options in the picture message editor are: Send, Add recipient, Insert,
Remove picture, Delete, Message details, Help, and Exit.
Your phone allows you to send and receive picture messages. Picture
messages are text messages that contain small black-and-white graphics.
There are several default pictures available in the Picture msgs. folder
in Images.
Note: This function can be used only if it is supported by your service
provider. Only phones that offer picture message features can
receive and display picture messages.
[ 77 ]
To send a picture message:
9
1
There are two possibilities, either:
•
Go to Images→ Picture msgs. and select
a picture to be sent. Select Options→
Send, or
•
Select Messaging→ New message→
Create:→ Text message and select
Insert→ Picture.
2
3
Enter recipient information and add text.
Select Options→ Send or press
.
Note: Each picture message is made up of several text messages.
Therefore, sending one picture message may cost more than
sending one text message.
Multimedia messages
A multimedia message can contain text, images and either video or
sound clips.
Note: This function can be used only if it is supported by your service
provider. Only devices that offer multimedia message or e-mail
features can receive and display multimedia messages. Devices
that do not have these features may receive details of a link to a
web page.
SETTINGS NEEDED FOR MULTIMEDIA MESSAGING
Options in the multimedia message editor are: Send, Add recipient, Insert,
Preview message, Objects, Remove, Delete, Message details, Sending options,
Help, and Exit.
You may receive the settings as a smart message from your service provider.
For availability of and subscription to data services, please contact your
service provider.
[ 78 ]
Messaging
1
Go to Settings→ Connection settings→ Access
points and define the settings for a multimedia
messaging access point:
9
Connection name - Give a descriptive name for
the connection.
Session mode - Select a data connection type:
GSM data, High speed GSM, or GPRS.
Gateway IP address - enter the address.
Example: Domain names such as www.nokia.ca can be translated
into IP addresses like 192.100.124.195.
Homepage - enter the address of the multimedia messaging center.
•
If you selected GSM data or High speed GSM, fill in: Dial-up
number - a phone number for the data call.
•
If you selected GPRS, fill in: Access point name - the name given to
you by your service provider.
For further information on different data connections, see also “Connection
2
Go to Messaging→ Options→ Settings→ Multimedia message. Open
Preferredconnection and select the access point you created to be used
as the preferred connection. See also “Settings for multimedia messages”
SET UP THE MESSAGING STORE
The messaging store defines whether the phone’s memory or the memory
card are used as the default. To define the messaging store:
Messaging→ Options→ Settings→ Messaging store and select either the
phone’s memory or the memory card, if one is used.
CREATE MULTIMEDIA MESSAGES
Note: Whenyou are sending a multimedia message to any phone other than
the Nokia 3650, Nokia 3600 or Nokia 7650, it is recommended to use
a smaller image size and a sound clip that is no longer than 15 seconds.
[ 79 ]
The default setting is Image size: Small. If you want to check the
image size setting, go to Messaging→ Options→ Settings→
Multimedia message or select Options→ Sending options when
you are creating a multimedia message. When you are sending a
multimedia message to an e-mail address or another Nokia 3650,
Nokia 3600 or Nokia 7650, select Options→ Sending Options→
Image size→ Large when you are creating a multimedia message.
9
1
2
In Messaging, select New message→ Create:→ Multimedia message
and press
.
Press
to select the recipient(s) from the Contacts directory or write
the phone number or e-mail address of the recipient in the To: field.
Add a semicolon (;) to separate each recipient. Press
to move to
the next field.
3
You can add the different objects of the multimedia message in any
order you want.
•
•
To add an image, select Options→ Insert → Image or New image.
To add a sound, select Options→ Insert→ Sound clip or New sound
clip. When sound has been added, the
icon is shown in the
navigation bar.
•
•
•
To add video, select Options→ Insert→ Video clip.
To write text, press
.
If you select Insert→ Image, Sound clip, Videoclip, or Template, a list
of items opens. Scroll to the item you wish to add and press Select.
Note: If you chose Image, first you need to select whether the image is
stored in the phone’s memory or the memory card, if one is used.
•
•
If you select Insert→ New image, Camera opens and you can take a new
picture. Press Remove to remove the picture and take another instead.
If you select Insert→ New sound clip, Recorder opens and you can record
a new sound. The new photo or sound is automatically saved and a
copy is inserted in the message.
Note: A multimedia message can contain only one photo and one sound
or video clip.
[ 80 ]
Messaging
4
To send the message, select Options→ Send or press
.
9
PREVIEW A MULTIMEDIA MESSAGE
To see what the multimedia message will look
like, select Options→ Preview message.
REMOVE AN OBJECT FROM A MULTIMEDIA
MESSAGE
To remove a multimedia object, select Options→
Remove→ Image Video clip or Sound clip. Press
to remove text.
WORK WITH DIFFERENT MEDIA OBJECTS
To see all the different media objects included in a multimedia message,
open a multimedia message and select Options→ Objects to open the
Objects view.
In the Objects view, you can change the order of the different objects,
delete objects, or open an object in a corresponding application.
Options in the Objects view are: Open, Insert, Place image first / Place text
first, Remove, Help, and Exit.
E-mail
SETTINGS NEEDED FOR E-MAIL
Before you can send, receive, retrieve, reply to, and forward e-mail, you must:
•
Configure an Internet Access Point (IAP) correctly. See “Connection
•
Note: Follow the instructions given by your remote mailbox and Internet
Service Provider.
WRITE AND SEND E-MAIL MESSAGES
Options in the e-mail editor are: Send, Add recipient, Insert, Attachments,
Delete, Message details, Sending options, Help, and Exit.
1
Select New message→ Create:→ E-mail. The editor opens.
[ 81 ]
2
3
Press
to select the recipient(s) from the Contacts directory or write
9
the e-mail address of the recipient in the To: field. Add a semicolon (;)
to separate each recipient. If you want to send a copy of your e-mail
to someone, write the address in the Cc: field. Press
the next field.
to move to
Write the message. If you want to add an attachment to the e-mail,
select Options→ Insert→ Image, Sound clip, Video clip, or Note.
will appear in the navigation bar to indicate that the e-mail has
an attachment. Template adds pre-written text to the e-mail.
You can also add an attachment to an e-mail by selecting Options→
Attachments in an open e-mail. The Attachments view opens where
you can add, view, and remove attachments.
Note: If you choose Image, first you need to select whether the image is
stored in the phone’s memory or the memory card, if one is used.
4
5
To remove an attachment, scroll to the attachment and select
Options→ Remove.
To send the e-mail, select Options→ Send or press
.
Note: E-mail messages are automatically placed in Outbox before
sending. In case something goes wrong while the phone is sending
the e-mail, the e-mail is left to Outbox with the status Failed.
Tip: If you want to send other files than photos, sounds, and notes as
attachments, open the appropriate application and select the option
Send→ Via e-mail, if available.
ATTACHMENT VIEW - ADD AND REMOVE ATTACHMENTS
To add an attachment to an e-mail, select Options→ Attachments in an
open e-mail. The Attachments view opens where you can add, view, and
remove attachments.
•
To add an attachment, select Options→ Insert→ Image, Sound clip,
Video clip, or Note. A list of items opens. Scroll to the one you want to
add and press OK. will appear in the navigation bar to indicate that
the e-mail has an attachment.
Note: If you chose Image, first you need to select whether the image is
stored in the phone’s memory or the memory card, if one is used.
[ 82 ]
Messaging
To remove an attachment, scroll to the attachment and select
Options→ Remove.
•
9
• INBOX - RECEIVE MESSAGES
Options in Inbox are: Open, Create message, Delete, Message
details, Move to folder, Move to phone memory (shown if you have defined
the memory card as the messaging store), Move to memory card (shown if you
have defined the phone’s memory as the messaging store), Mark/Unmark,
Help, and Exit.
Messages and data can be received via text message or multimedia service,
via an infrared, or Bluetooth connection. When there are unread messages
in Inbox, the icon changes to
.
In Inbox, unread messages appear in bold. The message icons tell you
what kind of a message it is. Here are some of the icons that you may see:
for an unread text message,
for an unread smart message,
for an unread multimedia message,
for an unread service message,
for data received via infrared,
for data received via Bluetooth, and
for an unknown message type.
View messages in Inbox
To open a message, scroll to the message and press
.
Use the scroll key to move up and down in the message. Press
to move to the previous or next message in the folder.
or
Options in different message viewers
The available options depend on the type of message you have opened
for viewing:
[ 83 ]
•
•
Save picture - saves the picture to Images→ Picture msgs.
9
Reply - copies the address of the sender to the To: field. Select Reply→
To all - to copy the address of the sender and Cc. field recipients to the
new message.
•
•
•
•
•
Forward - copies the message contents to an editor.
Call - call by pressing
.
View image - allows you to view and save the image.
Play sound clip - allows you to listen to the sound in the message.
Objects - shows you a list of all the different multimedia objects in a
multimedia message.
•
•
•
Attachments - shows you a list of files sent as e-mail attachments.
Message details - shows detailed information about a message.
Move to folder / Copy to folder - allows you to move or copy message(s)
to My folders, Inbox, or other folders you have created. See “Moving
•
•
AddtoContacts - allows you to copy the phone number or e-mail address
of the message sender to the Contacts directory. Choose whether you
want to create a new contact card or add the information to an existing
contact card.
Find - Searches the message for phone numbers, e-mail addresses,
and Internet addresses. After the search, you can make a call or send
a message to the found number or e-mail address, or save the data to
Contacts or as a bookmark.
View multimedia messages in Inbox
You can recognize multimedia messages by their icon
.
To open a multimedia message, scroll to it and press
. You can see
an image, read a message and hear a sound, simultaneously.
If sound is playing, press or to increase or decrease the sound
volume. If you want to mute the sound, press Stop.
[ 84 ]
Messaging
MULTIMEDIA MESSAGE OBJECTS
Options in the Objects view are: Open, Save, Send, Call, and Exit.
9
To see what kinds of media objects have been included in the multimedia
message, open the message and select Options→ Objects. In the Objects
view you can view files that have been included in the multimedia message.
You can choose to save the file in your phone or to send it, for example,
via infrared to another device.
To open a file, scroll to it and press the
.
Important: Multimedia message objects may contain viruses or otherwise
be harmful to your phone or PC. Do not open any attachment
if you are not sure of the trustworthiness of the sender. For
Example:You can open a vCard file and save the contact information
in the file to Contacts.
SOUNDS IN A MULTIMEDIA MESSAGE
Sound objects in a multimedia message are indicated by
indicator in
the navigation bar. Sounds are by default played through the loudspeaker.
To stop the sound, press Stop while sound is playing. You can change the
volume level by pressing
or
.
If you want to listen to a sound again after all the objects have been
shown and the playing of the sound has stopped, select Options→ Play
sound clip.
Receive smart messages
Tip: If you receive a vCard file that has a picture attached, the picture
will be saved to Contacts as well.
Your phone can receive many kinds of smart messages, text messages that
contain data (also called Over-The-Air (OTA) messages). To open a received
smart message, open Inbox, scroll to the smart message ( ), and press
.
•
Picture message - to save the picture in the Picture msgs. folder in
Images for later use, select Options→ Save picture.
•
Business card - to save the contact information, select Options→
Save business card.
[ 85 ]
Note: If certificates or sound files are attached to business cards, they
9
will not be saved.
•
•
Ringing tone - to save the ringing tone to Composer, select
Options→ Save.
Operator logo - to save the logo, select Options→ Save. The operator
logo can now be seen in standby mode instead of the service provider’s
own identification.
•
•
Calendar entry - to save the invitation to Calendar, select Options→
Save to Calendar.
WAP message - to save the bookmark, select Options→ Save to
bookmarks. The bookmark is added to the Bookmarks list in
browser service.
If the message contains both browser access point settings and
bookmarks, to save the data select Options→ Save all. Or, select
Options→ View details to view the bookmark and access point
information separately. If you do not want to save all data, select a
setting or bookmark, open the details and select Options→ Save to
Settings or Save to bookmarks depending on what you are viewing.
Tip: To later change the default access point settings for browser service
or multimedia messaging, go to Services→ Options→ Settings→
Default access point or Messaging→ Options→ Settings→
Multimedia message→ Preferred connection.
•
E-mail notification - Tells you how many new e-mails you have in your
remote mailbox. An extended notification may list more detailed
information such as subject, sender, attachments, and so on.
•
In addition, you can receive a text message service number, voice
mailbox number, profile settings for remote synchronization, access
point settings for the browser, multimedia messaging or e-mail, access
point login script settings, or e-mail settings.
To save the settings, select Options→ Save to SMS sett., Save to Voice
mail, Save to settings or Save to e-mail sett.
[ 86 ]
Messaging
Service messages
9
Options when viewing service message are: Download message, Move to
folder, Message details, Help, and Exit.
You can order service messages (pushed messages) from service providers.
Service messages are notifications of, for example, news headlines and
they may contain a text message or address of a browser service. For
availability and subscription, contact your service provider.
Service providers can update an existing service message every time a new
service message is received. Messages can be updated even if you have
moved them to another folder than Inbox. When service messages expire,
they are deleted automatically.
VIEWING SERVICE MESSAGES IN INBOX
1
In Inbox, scroll to a service message ( ) and press
.
2
To download or view the service, press Download message. The note
Downloading message is displayed. The phone starts to make a data
connection, if needed.
3
Press Back to return to Inbox.
VIEWING SERVICE MESSAGES IN THE BROWSER
When you are browsing, select Options→ Read service msgs. to download
and view new service messages.
• MY FOLDERS
Options in My folders are: Open, New message, Delete, Message
details, Move to folder, New folder, Rename, Help, and Exit.
In My folders you can organize your messages into folders, create new
folders, and rename and delete folders. Select Options→ Move to folder,
New folder, or Rename folder. For more information, see “Move items to a
Templates folder
You can use text templates to avoid rewriting messages that you send often.
To create a new template, select Options→ New template.
[ 87 ]
• REMOTE MAILBOX
9
When you open this folder, you can connect to your
remote mailbox:
•
•
to retrieve new e-mail headings or messages, or
view your previously retrieved e-mail headings or messages offline.
Tip: The Settings wizard program included in the PC Suite for Nokia 3650
or PC Suite for Nokia 3600 can help you configure access point and
mailbox settings. You can also copy existing settings, for example,
from your computer to your phone. See the CD-ROM supplied in the
sales package.
If you select New message→ Create:→ E-mail or Mailbox in the Messaging
main view and you have not set up your e-mail account, you will be
When you create a new mailbox, the name you give to the mailbox
automatically replaces Mailbox in the Messaging main view. You can have
several mailboxes (max. six).
Open the mailbox
When you open the mailbox, you can choose whether you want to view
the previously retrieved e-mail messages and e-mail headings offline or
connect to the e-mail server.
When you scroll to your mailbox and press
, the phone asks you if you
want to Connect to mailbox? Select Yes to connect to your mailbox or No
to view previously retrieved e-mail messages offline.
Another way to start a connection is to select Options→ Connect.
VIEW E-MAIL MESSAGES WHEN ONLINE
When you are online, you are continuously connected to a remote mailbox
via a data call or a packet data connection. See “Data connection indicators”
Note: If you are using the POP3 protocol, e-mail messages are not updated
automatically in online mode. To see the newest e-mail messages, you
need to disconnect and then make a new connection to your mailbox.
[ 88 ]
Messaging
Options when viewing e-mail headings are: Open, New message,
9
Connect /Disconnect, Retrieve, Delete, Message details, Copy, Mark/Unmark,
Help, and Exit.
VIEW E-MAIL MESSAGES WHEN OFFLINE
When you view e-mail messages offline, your phone is not connected to
the remote mailbox. This mode may help you to save on connection costs.
See “Call costs (system service)” on page 26 for further information.
To view e-mail messages offline, you must first retrieve e-mail messages
from your mailbox, see the next section. After you have retrieved the
e-mail messages to your phone, to end the data connection, select
Options→ Disconnect.
Now you can continue reading the retrieved e-mail headings and/or the
retrieved e-mail messages offline. You can write new e-mail messages, reply
to the retrieved e-mail messages, and forward e-mail messages. You can
order the e-mail messages to be sent the next time you connect to the
mailbox. When you open Mailbox the next time and you want to view and
read the e-mail messages offline, answer No to the Connect to mailbox? query.
Retrieve e-mail messages from the mailbox
If you are offline, select Options→ Connect to start a connection to a
remote mailbox.
The remote mailbox view is similar to the Inbox folder in Messaging. You
can move up and down in the list by pressing
icons are used to show the status of the e-mail:
or
. The following
- new e-mail (offline or online mode). The content has not been
retrieved from the mailbox to your phone (the arrow in the icon is
pointing outwards).
- new e-mail, the content has been retrieved from the mailbox (arrow
pointing inwards).
- for e-mail messages that have been read.
- for e-mail headings that have been read and the message content
has been deleted from the phone.
[ 89 ]
1
When you have an open connection to a remote
mailbox, select Options→ Retrieve→
9
•
•
New - to retrieve all new e-mail messages to
your phone.
Selected -to retrieve onlythe e-mail messages
that have been selected. Use the Mark/
Unmark→ Mark / Unmark commands to select
messages one by one.
•
All - to retrieve all messages from the mailbox.
To cancel retrieving, press Cancel.
2
After you have retrieved the e-mail messages, you can continue viewing
them online. Select Options→ Disconnect to close the connection and
to view the e-mail messages offline.
COPY E-MAIL MESSAGES TO ANOTHER FOLDER
If you want to copy an e-mail from the remote mailbox to a folder under My
folders, select Options→ Copy. Select a folder from the list and press OK.
Open e-mail messages
When you are viewing e-mail messages either in online or offline mode,
scroll to the e-mail you want to view and press
to open it. If the e-mail
message has not been retrieved (arrow in the icon is pointing outwards)
and you are offline and select Open, you will be asked if you want to
retrieve this message from the mailbox. Note that the data connection is
left open after the e-mail has been retrieved. Select Options→ Disconnect
to end the data connection.
Options when viewing an e-mail message are: Reply, Forward, Delete,
Attachments, Message details, Move to folder, Add to Contacts, Find, Help,
and Exit.
Disconnect from mailbox
When you are online, select Options→ Disconnect to end the data call
or GPRS connection to the remote mailbox. See also “Data connection
[ 90 ]
Messaging
View e-mail attachments
Options in the Attachments view are: Open, Retrieve, Save, Send, Delete,
9
Help, and Exit.
Open a message that has the attachment indicator and select Options→
Attachments to open the Attachments view. In the Attachments view, you
can retrieve, open, or save attachments. You can also send attachments
via infrared or Bluetooth.
Important: E-mail attachments may contain viruses or otherwise be
harmful to your phone or PC. Do not open any attachment if
you are not sure of the trustworthiness of the sender. For
Retrieve attachments to the phone
If the attachment has a dimmed indicator, it has not been retrieved to the
phone. To retrieve the attachment, scroll to it and select Options→ Retrieve.
Note: If your mailbox uses the IMAP 4 protocol, you can decide whether
to retrieve e-mail headings only, messages only, or messages and
attachments. With the POP3 protocol, the options are e-mail
headings only or messages and attachments.
Tip: To save memory, you can remove attachments from an e-mail while
retaining them on the e-mail server. Select Options→ Delete in the
Attachments view.
Open an attachment
1
In the Attachments view, scroll to an attachment and press
to open it.
•
If you are online, the attachment is retrieved directly from the
server and opened in the corresponding application.
•
If you are offline, the phone asks if you want to retrieve the
attachment to the phone. If you answer Yes, a connection to the
remote mailbox is started.
2
Press Back to return to the e-mail viewer.
file formats supported by the Nokia 3600 series, see the product
information at www.nokia.ca.
[ 91 ]
SAVE ATTACHMENTS SEPARATELY
9
To save an attachment, select Options→ Save in the Attachments view.
The attachment is saved in the corresponding application. For example,
sounds can be saved in Recorder and text files (.TXT) in Notes.
Attachments such as images can be saved on a memory card, if one is used.
Delete e-mail messages
To delete an e-mail from the phone while still retaining it in the remote
mailbox, select Options→ Delete→ Phone only.
Note: The phone mirrors the e-mail headings in the remote mailbox. So,
although you delete the message content, the e-mail heading stays
in your phone. If you want to remove the heading as well, you have
to first delete the e-mail message from your remote mailbox and
then make a connection from your phone to the remote mailbox
again to update the status.
To delete an e-mail from both the phone as well as from the remote mailbox,
select Options→ Delete→ Phone and server.
Note: If you are offline, the e-mail will be deleted first from your phone.
During the next connection to the remote mailbox, it will be
automatically deleted from the remote mailbox. If you are using
the POP3 protocol, messages marked to be deleted are removed
only after you have closed the connection to the remote mailbox.
UNDELETE E-MAIL MESSAGES WHEN OFFLINE
To cancel deleting an e-mail from both the phone and server, scroll to an
e-mail that has been marked to be deleted during the next connection
(
), and select Options→ Undelete.
• OUTBOX
The Outbox is a temporary storage place for messages waiting
to be sent.
Status of the messages in Outbox
•
Sending - A connection is being made and the message is being sent.
[ 92 ]
Messaging
Waiting/Queued - For example, if there are two similar types of
•
•
9
messages in Outbox, one of them is waiting until the first one is sent.
Resend at (time) - Sending has failed. The phone will try to send the
message again after a time-out period. Press Send if you want to
restart the sending immediately.
•
•
Deferred - You can set documents to be ‘on hold’ while they are in
Outbox. Scroll to a message that is being sent and select Options→
Defer sending.
Failed - The maximum number of sending attempts has been reached.
Sending has failed. If you were trying to send a text message, open
the message and check that the Sending settings are correct.
Example: Messages are placed in the Outbox, for example, when
your phone is outside the system coverage area. You can also
schedule e-mail messages to be sent the next time you connect to
your remote mailbox.
• VIEW MESSAGES ON A SIM CARD
Before you can view SIM messages, you need to copy them to a folder in
your phone.
1
2
3
4
In the Messaging main view, select Options→ SIM messages.
Select Options→ Mark/Unmark→ Mark or Mark all to mark messages.
Select Options→ Copy. A list of folders opens.
Select a folder and press OK. Go to the folder to view the messages.
• CELL BROADCAST (SYSTEM SERVICE)
Options in Cell broadcast are: Open, Subscribe /Unsubscribe,
Hotmark / Unhotmark, Topic, Settings, Help, and Exit.
In the Messaging main view, select Options→ Cell broadcast.
You can receive messages on various topics, such as weather or traffic
conditions from your service provider. For available topics and relevant
topic numbers, contact your service provider. In the main view you can see:
[ 93 ]
•
•
the status of the topic:
for new, unsubscribed messages.
- for new, subscribed messages and
-
)
9
the topic number, topic name, and whether it has been flagged (
for follow-up. You will be notified when messages belonging to a
flagged topic have arrived.
Note: A packet data (GPRS) connection may prevent cell broadcast
reception. Contactyourservice providerfor the correctGPRS settings.
For further information on the GPRS settings, see “Packet data
• SERVICE COMMAND EDITOR
In the Messaging main view, select Options→ Service command.
You can send service requests, such as activation commands for system
services (also known as USSD commands), to your service provider. For
more information, contact your service provider. To send a request:
•
in standby mode or when you have an active call, key in the command
number(s) and press Send, or
•
if you need to enter letters as well as numbers, select Messaging→
Options→ Service command.
• MESSAGING SETTINGS
The Messaging settings are divided into groups according to the different
message types. Scroll to the settings you want to edit and press
.
Settings for text messages
Options when editing text message center settings are: New msg. center,
Edit, Delete, Help, and Exit.
Go to Messaging and select Options→ Settings→ Text message to open
the following list of settings:
•
Message centers - Lists all the text message service centers that have
[ 94 ]
Messaging
Msg. center in use (Message center in use)- Defines which message
center is used for delivering text messages and smart messages such
as picture messages.
•
•
•
9
Receive report (delivery report)- When this system service is set to Yes,
the status of the sent message (Pending, Failed, Delivered) is shown in
the Log.
Message validity - If the recipient of a message cannot be reached within
the validity period, the message is removed from the text message service
center. Note that the system must support this feature. Maximum time
is the maximum amount of time allowed by the system.
•
Message sent as - The options are Text, Fax, Paging, and E-mail. For
further information, contact your service provider.
Note: Change this option only if you are sure that your service center is
able to convert text messages into these other formats.
•
•
Preferredconnection - You can send text messages via the normal GSM
system or via GPRS, if supported by the system. See “Packet data
Reply viasame ctr. (system service) - By setting this option to Yes, if the
recipient replies to your message, the return message is sent using the
same text message service center number. Note that this may not
work between all operators.
ADD A NEW TEXT MESSAGE CENTER
1
2
3
Open Message centers and select Options→ New msg. center.
Press
, write a name for the service center and press OK.
Press
, press and write the number of the text message service
center (Must be defined). Press OK. You need the message center
number to send text and picture messages. You can get the number
from your service provider.
To use the new settings, go back to the settings view and scroll to
Msg. center in use. Press
and select the new service center.
[ 95 ]
Settings for multimedia messages
Go to Messaging and select Options→ Settings→ Multimedia message to
open the following list of settings:
9
•
Preferred connection (Must be defined) - Select which access point is
used as the preferred connection for the multimedia message center.
Note: If you receive multimedia message settings in a smart message and
save them, the received settings are automatically used for the
•
Secondary conn. - Select which access point is used as the secondary
connection for the multimedia message center.
Note: Both Preferred connection and Secondary conn. must have the same
Homepage setting pointing to the same multimedia service center.
Only the data connection is different.
Example: If your preferred connection uses a packet data
connection, you may want to use high speed data or data call for
the secondary connection. This way you are able to send and receive
multimedia messages even when you are not in a system that
supports packet data. For availability of and subscription to data
services, please contact your service provider. See “General
•
Multimedia reception - Select:
Only in home net. - if you want to receive multimedia messages only
when you are in your home system. When you are outside your home
system, multimedia message reception is turned off.
Always on - if you want to receive multimedia messages always.
Off - if you do not want to receive multimedia messages or
advertisements at all.
Important: When you are outside your home system, sending and receiving
multimedia messages may cost more. If the settings Only in
home net. or Always on have been selected, your phone can
make an active data call or GPRS connection without your
knowledge.
[ 96 ]
Messaging
•
On receiving msg. - Select:
9
Retr. immediately - if you want the phone to retrieve multimedia
messages instantly. If there are messages with Deferred status, they
will be retrieved as well.
Defer retrieval - if you want the multimedia messaging center to save
the message to be retrieved later. To retrieve the message later, set On
receiving msg. to Retr. immediately.
Reject message - if you want to reject multimedia messages. The
multimedia messaging center will delete the messages.
•
•
•
Allow anon. messages - Select No, if you want to reject messages
coming from an anonymous sender.
Receive adverts - Define whether you want to receive multimedia
message advertisements or not.
Reports - Set to Yes, if you want the status of the sent message
(Pending, Failed, Delivered) to be shown in the Log. When set to No,
only the status Delivered is shown in the Log.
•
•
Deny report sending - Choose Yes, if you do not want your phone to
send delivery reports of received multimedia messages.
Message validity - If the recipient of a message cannot be reached within
the validity period, the message is removed from the multimedia
messaging center. Note that the system must support this feature.
Maximum time is the maximum amount of time allowed by the system.
•
•
Image size - Define the size of the image in a multimedia message.
The options are: Small (max. of 160 x 120 pixels) and Large (max.
640 x 480 pixels).
Speaker - Choose Loudspeaker or Normal, if you want the sounds in a
multimedia message to be played through the loudspeaker or the
Settings for e-mail
Go to Messaging and select Options→ Settings→ E-mail.
[ 97 ]
Options when editing e-mail settings are: Editing options, New mailbox,
Delete, Call, and Exit.
9
Open Mailbox in use to select which mailbox you want to use.
SETTINGS FOR MAILBOXES
Select Mailboxes to open a list of mailboxes that have been defined. If no
mailboxes have been defined, you will be prompted to do so. The following
list of settings is shown:
•
•
Mailbox name - Write a descriptive name for the mailbox.
Access point in use (Must be defined) - The Internet Access Point (IAP)
used for the mailbox. Choose an IAP from the list. For more information
•
My mailaddress (Must be defined) - Write the e-mail address given to
you by your service provider. The address must contain the @
character. Replies to your messages are sent to this address.
•
•
Outgoing mail server: (Must be defined) - Write the IP address or host
name of the computer that sends your e-mail.
Send message - Define how e-mail is sent from your phone.
Immediately - A connection to the mailbox is started immediately
after you have selected Send. During next conn. - e-mail is sent when
you connect to your remote mailbox the next time.
•
•
Send copy to self - Select Yes to save a copy of the e-mail to your
remote mailbox and to the address defined in My mail address.
Include signature - Select Yes if you want to attach a signature to your
e-mail messages and to start to write or edit a signature text.
•
•
User name: - Write your user name, given to you by your service provider.
Password: - Write your password. If you leave this field blank, you will
be prompted for the password when you try to connect to your
remote mailbox.
•
•
Incoming mail server: (Must be defined) - The IP address or host name
of the computer that receives your e-mail.
Mailbox type: - Defines the e-mail protocol your remote mailbox
service provider recommends. The options are POP3 and IMAP4.
[ 98 ]
Messaging
Note: This setting can be selected only once and cannot be changed if
9
you have saved or exited from the mailbox settings.
•
•
Security - Used with the POP3, IMAP4, and SMTP protocols to secure
the connection to the remote mailbox.
APOP secure login - Used with the POP3 protocol to encrypt the sending
of passwords to the remote e-mail server. Not shown if IMAP4 is
selected for Mailbox type:.
•
•
Retrieve attachment (not shown if the e-mail protocol is set to POP3) -
To retrieve e-mail with or without attachments.
Retrieve headers - To limit the number of e-mail headers you want to
retrieve to your phone. The options are All and User defined. Used with
IMAP4 protocol only.
Settings for service messages
When you go to Messaging and select Options→ Settings→ Service
message, the following list of settings opens:
•
Service messages - Choose whether or not you want to receive
service messages.
•
Authentic. needed - Choose if you want to receive service messages
only from authorized sources.
Settings for Cell broadcast
Check with your service provider to see if Cell broadcast is available and
what topics and numbers are available. Go to Messaging→ Options→
Settings→ Cell broadcast to change the settings: Reception - On or Off.
•
Language - All allows you to receive cell broadcast messages in every
possible language. Selected allows you to choose in which languages
you wish to receive cell broadcast messages. If the language you want
could not be found in the list, select Other.
•
Topic detection - If you receive a message that does not belong to any
of the existing topics, Topic detection→ On allows you to save the topic
number automatically. The topic number is saved to the topic list and
shown without a name. Choose Off if you do not want to save new
topic numbers automatically.
[ 99 ]
Settings for the Sent folder
9
Go to Messaging and select Options→ Settings→ Sent folder to open the
following list of settings:
•
•
•
Save sent messages - Choose if you want to save a copy of every text
message, multimedia message, or e-mail that you have sent to the
Sent items folder.
No. of saved msgs. - Define how many sent messages will be saved to
the Sent items folder at a time. The default limit is 20 messages.
When the limit is reached, the oldest message is deleted.
Memory in use - Define memory store. Choices are: phone’s memory or
memory card, if one is used.
• WIRELESS VILLAGE
You can send and receive messages with Wireless Village. Check with your
service provider for availability. Wireless Village is different from SMS or
e-mail because you can have a true, two-way conversation with other
users. For more information on Wireless Village, see www.nokia.ca.
[ 100 ]
Profiles
10
10 Profiles
Go to Menu→ Profiles.
In Profiles, you can adjust and customize the
phone tones for different events, environments,
or caller groups. There are five preset profiles:
Normal, Silent, Meeting, Outdoor, and Pager,
which you can customize to meet your needs.
You can see the currently selected profile at
the top of the display in standby mode. If the
Normal profile is in use, only the current date
is shown.
The tones can be default ringing tones, tones created in Composer, tones
received in a message, or transferred to your phone via infrared, Bluetooth,
or a PC connection and then saved to your phone.
• CHANGE THE PROFILE
1
Go to Menu→ Profiles. A list of profiles opens.
2
In the Profiles list, scroll to a profile and select Options→ Activate.
Shortcut: To change the profile, press
in standby mode. Scroll to the
profile you want to activate and press OK.
• CUSTOMIZE PROFILES
1
To modify a profile, scroll to the profile in
the Profiles list and select Options→
Customize. A list of profile settings opens.
2
Scroll to the setting you want to change
and press
to open the choices:
[ 101 ]
•
Ringing tone - To set the ringing tone for voice calls, choose a ringing
tone from the list. When you scroll through the list, you can stop on
a tone to listen to it before you make your selection. Press any key to
stop the sound. If a memory card is used, tones stored on it have the
icon next to the tone name.
10
Note: You can change ringing tones in two places: Profiles or Contacts.
•
•
Ringing options - When Ascending is selected, the ringing volume
starts from level one and increases level by level to the set volume level.
Ringing volume - To set the volume level for the ringing and message
alert tones.
•
•
Message alert tone - To set the tone for messages.
Vibrating alert - To set the phone to vibrate at incoming voice calls
and messages.
•
•
Keypad tones - To set the volume level for keypad tones.
Warning tones - The phone sounds a warning tone, for example, when
the battery is running out of power.
•
Alert for - To set the phone to ring only upon calls from phone numbers
that belong to a selected contact group. Phone calls coming from
people outside the selected group will have a silent alert. The choices
are All calls / (list of contact groups, if you have created them). See
•
Profile name - You can rename a profile with any name you want. The
Normal profile cannot be renamed.
[ 102 ]
Favorites
11
11 Favorites
Go to Menu→ Favorites.
Note: Your phone must be switched on to
use this function. Do not switch the
phone on when wireless phone use is
prohibited or when it may cause
interference or danger.
You can use Favorites to store shortcuts, links
to your favorite photos, video clips, notes,
Recorder sound files, browser bookmarks, and
saved browser pages.
The default shortcuts are:
- opens the Notes editor
- opens the Calendar with the current date selected
- opens the Messaging Inbox
Options in the Favorites main view are: Open, Edit shortcut name, Delete
shortcut, Move, List view / Grid view, Help, and Exit.
• ADD SHORTCUTS
Shortcuts can be added only from the individual applications. Not all
applications have this functionality.
1
Open the application and scroll to the item that you want to add as a
shortcut to Favorites.
2
Select Options→ Add to Favorites and press OK.
Note: A shortcut in Favorites is automatically updated if you move the
item it is pointing to, for example, from one folder to another.
[ 103 ]
• SHORTCUT OPTIONS
11
•
To open a shortcut, scroll to the icon and press
. The file is opened
in the corresponding application.
•
To delete a shortcut, scroll to the shortcut you want to remove and
select Options→ Delete shortcut. Removing a shortcut does not affect
the file it is referring to.
•
To change the shortcut heading, select Options→ Edit shortcut name.
Write the new name. This change affects only the shortcut, not the
file or item the shortcut refers to.
[ 104 ]
Calendar and To-do
12
1 2 C a l e n d a r a n d To - d o
Go to Menu→ Calendar
Note: Your phone must be switched on to use this function. Do not switch
the phone on when wireless phone use is prohibited or when it
may cause interference or danger.
Options in the different calendar views are: Open, New entry,
Week view/Month view, Delete, Go to date, Send, Settings, Help, and Exit.
In Calendar, you can keep track of your appointments, meetings, birthdays,
anniversaries, and other events. You can also set a calendar alarm to remind
you of upcoming events.
• CREATE CALENDAR ENTRIES
1
Select Options→ New entry and select:
•
Meeting to remind you of an
appointment that has a specific
date and time.
•
•
Memo to write ageneral entryfor aday.
Anniversary to remind you of birthdays
or special dates. Anniversary entries
are repeated every year.
2
3
scroll key to move between fields. Press
and lower case.
to change between upper
To save the entry, press Done.
Edit calendar entries
Options when editing a calendar entry are: Delete, Send, Help, and Exit.
1
2
In the Day view, scroll to the entry and press
to open it.
Edit the entry fields and press Done.
[ 105 ]
•
If you are editing a repeated entry, choose how you want the changes
to take effect: All occurrences - all repeated entries are changed /
This entry only - only the current entry will be changed.
12
Delete calendar entries
•
In the Day view, scroll to the entry you want to delete and select
Options→ Delete or press
. Press OK to confirm.
•
If you are deleting a repeated entry, choose how you want the change
to take effect: All occurrences - all repeated entries are deleted / This
entry only - only the current entry will be deleted.
Example: Your weekly class has been cancelled. You have set the
calendar to remind you every week. Choose This entry only and the
calendar will remind you again next week.
Calendar entry fields
•
•
•
•
•
Subject / Occasion - Write a description of the event.
Location - the place of a meeting, optional.
Start time, End time, Start date, and End date.
Alarm - Press
to activate the fields for Alarm time and Alarm date.
Repeat - Press
to change the entry to be repeating. Shown with
in the Day view.
Example: The repeat function is handy if you have a recurring
event, a weekly class, a biweekly meeting, or a daily routine you
need to remember.
•
•
Repeat until - You can set an ending date for the repeated entry, for
example, the ending date of a weekly course you are taking. This
option is shown only if you have selected to repeat the event.
Synchronization - If you select Private, after synchronization the
calendar entry can be seen only by you and it will not be shown to
others with online access to view the calendar. This is useful when, for
example, you synchronize your calendar on a compatible computer at
work. If you select Public, the calendar entry is shown to others who have
access to view your calendar online. If you select None, the calendar
entry will not be copied to your PC when you synchronize your calendar.
[ 106 ]
Calendar and To-do
Calendar views
12
MONTH VIEW
In the Month view, one row equals one week. The current date is underlined.
Dates that have calendar entries are marked with a small triangle at the
right bottom corner. There is a frame around the currently selected date.
•
•
To open the Day view, scroll to the date you want to open and press
To go to a certain date, select Options→ Go to date. Write the date
and press OK.
Tip: If you press
in Month, Week, or Day views, the current date is
automatically highlighted.
Calendar entry icons
in Day and Week views
Synchronization icons
in Month view
Meeting
Red Private
Blue Public
None
Memo
Anniversary
The day has more
Purple
than one view
[ 107 ]
WEEK VIEW
12
In the Week view, the calendar entries for the selected week are shown in
seven day boxes. The current day of the week is underlined. Memos and
Anniversaries are placed before 8 o’clock. Meeting entries are marked
with colored bars according to starting and ending times.
To view or edit an entry, scroll to the cell that has an entry and press
to open the Day view, then scroll to the entry and press
to open it.
Options in the different calendar views are: Open, New entry,
Week view/Month view, Delete, Go to date, Send, Settings, Help, and Exit.
DAY VIEW
In the Day view, you can see the calendar entries for the selected day.
The entries are grouped according to their starting time. Memos and
Anniversaries are placed before 8 o’clock.
•
•
To open an entry for editing, scroll to it and press
.
Press to go to the next day or press to go to the previous day.
SETTINGS FOR CALENDAR VIEWS
Select Options→ Settings and select:
•
Default view - To select the view that is shown first when you open
Calendar.
•
•
Week starts on - To change the starting day of the week.
Week view title - To change the title of the Week view to be the week
number or the week dates.
Shortcut: To write a calendar entry, press any key (
-
) in any
calendar view. A Meeting entry is opened and the characters you keyed in
are added to the Subject field.
• SET CALENDAR ALARMS
1
Create a new Meeting or Anniversary entry, or open a previously
created entry.
[ 108 ]
Calendar and To-do
to open, Select On, press to open
2
Scroll to Alarm and press
12
the Alarm time and Alarm date fields.
3
4
Set the alarm time and date.
Press Done. An alarm indicator
is shown next to the entry in the
Day view.
Stop a calendar alarm
The alarm duration is one minute. When the alarm time expires, press
Stop to end the calendar alarm. If you press any other key, the alarm is
set to snooze.
• SEND CALENDAR ENTRIES
In the Day view, scroll to the entry you want to send and select Options→
Send. Then select the method, the choices are: Via text message, Via e-mail
(available only if the correct e-mail settings are in place), Via Bluetooth, or Via
• TO-DO
Go to Menu→ To-do.
In To-do you can keep a list of tasks that you need to do.
1
To start to write a to-do note, press any key
). The editor opens and the cursor
(
-
blinks after the letters you have keyed in.
2
Write the task in the Subject field. Press
to
add special characters.
•
•
To set the due date for the task, scroll to
the Due date field and key in a date.
To set a priority for the to-do note, scroll
to the Priority field and press
.
3
To save the to-do note, press Done.
[ 109 ]
Note: If you remove all characters and press Done, the previously saved
12
note will be deleted.
•
•
To open a to-do note, scroll to it and press
To delete a to-do note, scroll to it and select Options→ Delete
or press
.
.
•
•
To mark a to-do note as completed, scroll to it and select
Options→ Mark as done.
To restore a to-do note, select Options→ Mark as not done.
Priority icons
High
Low
no icon Normal
Status icons
task completed
not completed
[ 110 ]
Extras
13
13 Extras
• CALCULATOR
Note: Your phone must be switched on to use this function. Do not switch
the phone on when wireless phone use is prohibited or when it
may cause interference or danger.
Go to Menu→ Extras→ Calculator
Options in Calculator are: Last result, Memory, Clear screen, Help, and Exit.
1
Enter the first number of your calculation. Press
mistakes.
to erase any
2
Scroll to a function and press
Use to add, to subtract,
to select it.
to multiply, or
to divide.
.
3
4
Enter the second number.
To execute the calculation, scroll to
and press
Note: The Calculator has limited accuracy and rounding errors may occur,
especially in long divisions.
•
•
•
To add a decimal, press
Press and hold
Use and
.
to clear the result of the previous calculation.
to view previous calculations and move in
the sheet.
•
•
Select
to save a number to the memory, indicated by M.
To retrieve the number from the memory, select
.
To retrieve the result of the last calculation, select Options→
Last result.
Tip: Press
repeatedly to scroll the functions. You can see the selection
change between the functions.
[ 111 ]
• COMPOSER
13
Go to Menu→ Extras→ Composer.
Options in the Composer main view are: Open, New tone, Delete, Mark/
Unmark, Rename, Duplicate, Help, and Exit.
Composer allows you to create your own, customized ringing tones. Note
that it is not possible to edit a default ringing tone.
1
Select Options→ New tone to open the editor and to start composing.
•
Or, select Options→ Insert symbol to open a list of notes and rests.
The default duration for a note is 1/4.
•
•
•
To listen to the tone, press
playback is always started from the beginning of the tone. To stop
playing, press Stop.
or select Options→ Play. The
To adjust the volume while a tone is playing, press
to increase
to decrease it. Or, select Options→ Volume before
or press
you start to play the tone.
To adjust the tempo, select Options→ Tempo. To increase or
decrease the tempo gradually, press and hold
or
,
respectively. Tempo is measured in beats per minute. The maximum
is 250 beats, the default tempo for a new tone is 160 beats, and
the minimum is 50 beats.
•
To apply different playing styles, select Options→ Style→ Legato -
played in a smooth and even manner or Staccato - notes are
played separately to produce short sharp sounds.
•
•
•
To select many notes or rests at the same time, press and hold
and press and hold
To move note(s) up or down on the staff by a half step, scroll to
the note and press or
For example, press and hold
or
at the same time.
.
together with
to produce C#.
2
Select Back to save.
[ 112 ]
Extras
Options when composing are: Play, Insert symbol, Style, Tempo, Volume,
13
Help and Exit.
Key Note Key and function
c
d
e
f
Shortens the duration of the selected note(s)/rest(s) in steps.
Lengthens the duration of the selected note(s)/rest(s) in steps.
Inserts a rest.
Press
to open a list of notes and rests.
Switches octaves, all selected note(s) or rest(s) is/are
moved to the next octave.
g
a
b
Deletes selected note(s).
A long press of keys
-
produces a lengthened
(dotted) note or rest or shortens a lengthened note.
• CONVERTER
In Converter, you can convert measures such as Length from one
unit (Yards) to another (Meters).
Go to Menu→ Extras→ Converter.
Options in Converter are: Select unit /Change currency, Conversion type,
Currency rates, Help, and Exit.
Note: The Converter has limited accuracy and rounding errors may occur.
Note: Before you can make currency conversions, you need to choose a
base currency (usually your domestic currency) and add exchange
Convert units
1
Scroll to the Type field and press
to open a list of measures. Scroll
to the measure you want to use and press OK.
[ 113 ]
2
3
Scroll to the first Unit field and press
units. Select the unit from which you want to convert and press OK.
Scroll to the next Unit field and select the unit to which you want
to convert.
Scroll to the first Amount field and key in the value you want to
convert. The other Amount field changes automatically to show the
converted value.
to open a list of available
13
Press
to add a decimal and press
for the +, - (for temperature),
and E (exponent) symbols.
Note: The conversion order changes if you write a value in the second
Amount field. The result is shown in the first Amount field.
Tip: To rename a currency, go to the Currency rates view, scroll to the
currency, and select Options→ Rename currency.
Set a base currency and exchange rates
Before you can make currency conversions, you need to choose a base
currency (usually your domestic currency) and add exchange rates.
Note: The rate of the base currency is always 1. The base currency
determines the conversion rates of the other currencies.
Example: If you set the Canadian Dollar (CAD) as the base currency,
a US Dollar is .65. Thus, you would write .65 as the exchange rate for
the US Dollar (USD).
1
2
Select Currency as the measure type and select Options→ Currency
rates. A list of currencies opens and you can see the current base
currency at the top.
To change the base currency, scroll to the currency (usually your
domestic currency), and select Options→ Set as base curr.
Important: When you change the base currency, all previously set
exchange rates are set to 0 and you need to key in new rates.
3
4
Add exchange rates (see example), scroll to the currency, and key in a
new rate, that is, how many units of the currency equal one unit of
the base currency you have selected.
After you have inserted all the needed exchange rates, you can make
[ 114 ]
Extras
• NOTES
13
Go to Menu→ Extras→ Notes.
You can link notes to Favorites and send them to other devices.
Plain text files (TXT format) you receive can be saved to Notes.
Press any key press (
-
) to start to write. Press
to clear letters.
Press Done to save.
• CLOCK
Go to Menu→ Extras→ Clock.
Options in Clock are: Set alarm, Reset alarm, Remove alarm,
Settings, Help, and Exit.
Change clock settings
To change the time or date, select Options→ Settings in Clock. To change
the clock shown in standby mode, scroll down in the Date and time settings
and select Clock type→ Analog or Digital.
Set an alarm
1
To set a new alarm, select Options→ Set alarm.
2
Enter the alarm time and press OK. When the alarm is active, the
indicator is shown.
The alarm clock works even if the phone is switched off.
To cancel an alarm, go to clock and select Options→ Remove alarm.
TURN OFF THE ALARM
•
Press Stop to turn off the alarm.
•
When the alarm tone sounds, press any key or Snooze to stop the
alarm for five minutes, after which it will resume. You can do this a
maximum of five times.
If the alarm time is reached while the phone is switched off, the phone
switches itself on and starts sounding the alarm tone. If you press Stop,
the phone asks whether you want to activate the phone for calls. Press No
to switch off the phone or Yes to make and receive calls.
[ 115 ]
Note: Do not press Yes when wireless phone use is prohibited or when it
13
may cause interference or danger.
• RECORDER
Go to Menu→ Extras→ Recorder.
Options in Recorder are: Open, Record sound clip, Delete, Move to
phone mem, Move to mem. card, Mark/Unmark, Rename sound clip, Send,
Settings, Add to Favorites, Help, and Exit.
The voice recorder allows you to record telephone conversations and voice
memos. If you are recording a telephone conversation, both parties will
hear a tone every five seconds during recording.
Note: Obey all local laws governing recording of calls. Do not use this
feature illegally.
Select Options→ Record sound clip and scroll to a function and press
to select it. Use:
fast forward,
- to record,
- to pause,
- to stop,
- to
- to fast rewind, or
- to play an opened sound file.
Note: Recorder cannot be used when a data call or a GPRS connection
is active.
• MEMORY CARD
Go to Menu→ Extras→ Memory card.
Options in the memory card are: Backup phone mem., Restore
from card, Format mem. card, Memory card name, Set password,
Change password, Remove password, Unlock memory card, Mem. in
use, Help and Exit.
If you have a memory card you can use it to store your multimedia files
like video clips and sound files, photos, messaging information, and to
backup information from your phone’s memory.
Important: Keep all memory cards out of the reach of small children.
Note: Details of how you can use the memory card with other features
and applications of your Nokia 3600 series phone are given in the
sections describing these features and applications.
[ 116 ]
Extras
Insert the memory card
A
13
B
1
Make sure the phone is switched off.
2
With the back of the phone facing you, slide open the cover and remove
the battery, see Quick start ‘Insert the SIM card’ for instructions on
removing the cover.
3
Position the memory card in its slot.
Make sure that the gold contacts of the card are facing down.
Slide the silver catch over the memory card to secure it.
4
5
When you have secured the card in place, replace the battery, then
replace the cover by sliding it back into place.
Important: Do not remove the memory card
in the middle of an operation.
Be sure to close all memory card
applications before removing
the card.
[ 117 ]
Important: If you are installing an application to the memory card and
need to reboot the phone, do not remove the card until the
reboot is complete. Otherwise the application files may be lost.
13
Format the memory card
You must format the memory card before you can use it for the first time.
Select Options→ Format mem. card.
You will be asked to confirm your request and once you confirm,
formatting starts.
Back up and restore information
You can backup information from your phone’s memory to the memory card.
Select Options→ Backup phone mem.
You can restore information from the memory card to the phone’s memory.
Select Options→ Restore from card.
Memory card password
You can set a password to protect your memory card against unauthorized use.
Note: The password is stored in your phone and you do not have to enter
it again while you are using the memory card on the same phone.
If you want to use the memory card on another phone, you will be
asked for the password.
SET UP, CHANGE, OR REMOVE YOUR PASSWORD
Select Options→ Set password, Change password, or Remove password.
The password can be up to eight characters long.
Important: Once the password is removed, the memory card can be used
on any phone without a password.
Check memory consumption
Using the Mem. in use option, you can check the memory consumption
of different data groups and the available memory for installing new
applications or software on your memory card.
Select Options→ Memory details.
[ 118 ]
Services (XHTML)
14
14 Services (XHTML)
Go to Menu→ Servicesor press and hold
in standby mode.
Note: Your phone must be switched on to use this function. Do not switch
the phone on when wireless phone use is prohibited or when it
may cause interference or danger.
Glossary: XHTML browser supports pages written in the Hypertext
Markup Language (XHTML) and the Wireless Markup Language
(WML).
Various service providers on the Internet
maintain pages specifically designed for mobile
phones, offering services such as news,
weather reports, banking, travel information,
entertainment, and games. With the XHTML
browser you can view these services as WAP
pages written in WML, XHTML pages written
in XHTML, or a mixture of both.
Note: Check the availability of services,
pricing, and tariffs with your network
operator and/or service provider. Service
providers will also give you instructions on how to use their services.
• BASIC STEPS FOR ACCESSING THE WEB
•
Save the settings that are needed to access the web service that you
•
•
•
Make a connection to the service. See “Make a connection” on page 120.
Start browsing the web pages.
End the connection to the service.
[ 119 ]
• PHONE BROWSER SERVICE SETTINGS
Receiving settings in a smart message
14
Tip: Settings may be available, for example, on the site of a network
operator or service provider.
You may receive service settings in a special text message, a so-called smart
message, from the network operator or service provider that offers the
contact your network operator or service provider.
Key in the settings manually
Follow the instructions given to you by your service provider.
1
Go to Menu→ Tools→ Settings→ Connection→ Access points and
define the settings for an access point. See “Connection settings” on
2
Go to Services→ Options→ Add bookmark. Write a name for the
bookmark and the address of the browser page defined for the current
access point.
Make a connection
Tip: To access the Bookmarks view while browsing, pressand hold down
To return to the browser view again, select Options→ Back to page.
.
Once you have stored all the required connection settings, you can access
browser pages.
There are three different ways to access browser pages:
•
•
•
Select the homepage ( ) of your service provider,
Select a bookmark from the Bookmarks view, or
Press the keys
-
to start to write the address of a browser
service. The Go to field at the bottom of the display is immediately
activated and you can continue writing the address there.
After you have selected a page or written the address, press
to start
[ 120 ]
Services (XHTML)
Connection security
14
If the security indicator
is displayed during a connection, the data
transmission between the phone and the browser gateway or server is
encrypted and secure.
Note: The security icon does not indicate that data transmission between
the gateway and the content server (place where the requested
resource is stored) is secure. It is up to the service provider to secure
data transmission between the gateway and the content server.
View bookmarks
Options in the Bookmarks view (selection on a bookmark or folder) are:
Open, Download, Back to page, Send, Go to URL address / Find bookmark, Add
bookmark, Edit, Delete, Read service msgs., Disconnect, Move to folder, New
folder, Mark/Unmark, Rename, Clear cache, Details, Add to Favorites, Settings,
Help, and Exit.
Glossary: A bookmark consists of an Internet address (mandatory),
bookmark title, WAP access point, and if the service requires, a
user name and password.
Note: Your phone may have some pre-installed bookmarks for sites not
affiliated with Nokia. Nokia does not warrant or endorse these
sites. If you choose to access them, you should take the same
precautions, for security or content, as you would with any site.
In the Bookmarks view, you can see bookmarks pointing to different kinds
of web pages. Bookmarks are indicated by the following icons:
- The starting page defined for the browser access point. If you
use another web access point for browsing, the starting page is
changed accordingly.
- The last visited page. When the phone is disconnected from the
service, the address of the last visited page is kept in memory until a new
page is visited during the next connection.
- A bookmark showing the title.
When you scroll through bookmarks, you can see the address of the
highlighted bookmark in the Go to field at the bottom of the display.
[ 121 ]
Options when browsing are: Open, Service options, Bookmarks, History, Go
to URL address, View images, Read service msgs., Save as bookmark, Send
bookmark, Reload, Disconnect, Show images, Clear cache, Save page, Find,
Details, Session, Security, Settings, Help, and Exit.
14
Add bookmarks manually
1
In the Bookmarks view, select Options→ Add bookmark.
2
Start to fill in the fields. Only the address must be defined. The default
access point is assigned to the bookmark if no other one is selected.
Press
to enter special characters such as /, ., :, and @. Press
to
clear characters.
3
Select Options→ Save to save the bookmark.
Send bookmarks
To send a bookmark, scroll to it and select Options→ Send→ Via text message.
• BROWSING
On a browser page, new links appear underlined in blue and previously visited
links in purple. Images that act as links have a blue border around them.
Keys and commands used in browsing
•
•
•
To open a link, press
.
To scroll the view, use the scroll key.
To enter letters and numbers in a field,
press the keys
enter special characters such as /, ., :, and
@. Press
to clear characters.
-
. Press
to
•
To go to the previous page while browsing,
press Back. If Back is not available, select
Options→ History to view a chronological
list of the pages you have visited during a
browsing session. The history list is cleared each time a session is closed.
[ 122 ]
Services (XHTML)
•
•
•
To check boxes and make selections, press
.
14
To retrieve the latest content from the server, select Options→ Reload.
To open a sublist of commands or actions for the currently open web
page, select Options→ Service options.
•
Press
to disconnect from a web service and to quit browsing.
VIEWING NEW SERVICE MESSAGES WHILE BROWSING
To download and view new service messages while browsing:
1
2
Select Options→ Read service msgs.
(shown only if there are new messages).
Scroll to the message and press
download and open it.
to
For more information about service
SAVING BOOKMARKS
•
To save a bookmark while browsing, select
Options→ Save as bookmark.
•
To save a bookmark received in a smart message, open the message
in the Inbox in Messaging and select Options→ Save to bookmarks.
• VIEWING SAVED PAGES
Options in the Saved pages view are: Open, Back to page, Reload, Remove,
Read service msgs., Disconnect, Move to folder, New folder, Mark/Unmark,
Rename, Clear cache, Details, Add to Favourites, Settings, Help, and Exit.
[ 123 ]
If you regularly browse pages containing
information which does not change very
often, for example a train timetable, you can
save and then browse them when offline. If
you have a memory card, you can save web
pages on it instead of the phone’s memory.
14
•
To save a page, while browsing select
Options→ Save page.
Saved pages are indicated by the
following icon:
- The saved web page.
In the saved pages view you can also create folders to store your
saved web pages.
Folders are indicated by the following icon:
- Folder containing saved web pages.
•
To open the Saved pages view, press
in the Bookmarks view. In the
Saved pages view, press to open a saved page.
If you want to start a connection to the web service and to retrieve the page
again, select Options→ Reload. You can also arrange the pages into folders.
Note: The phone stays online after you reload the page.
• DOWNLOAD THROUGH THE BROWSER
You can download items such as ringing tones, images, operator logos and
video clips through the mobile browser. These items can be provided free
or for a price.
Once downloaded, items are handled by the respective applications on
your phone, for example a downloaded photo will be saved in the Images.
Download directly from the web page
To download the item directly from a web page:
•
Scroll to the link and select Options→ Open.
[ 124 ]
Services (XHTML)
Purchase an item
14
Glossary: Digital Rights Management (DRM) is a system for
protecting the copyright of digital content that is distributed online.
Note: Copyright protections may prevent some images, ringtones and other
content from being copied, modified, transferred or forwarded.
To download the item:
•
•
Scroll to the link and select Options→ Open.
Select Buy if you want to buy the item.
Check an item before downloading
You can see details about an item before you download it. Details about
an item may include the price, brief description and size.
Note: Check with your service provide to see if they offer this service.
•
Scroll to the link and select
Options→ Open.
Details about the item are displayed on
your phone.
•
If you want to continue with the
downloading, press Accept or if you want
to cancel the download, press Cancel.
• END A CONNECTION
•
Select Options→ Disconnect, or
•
Press and hold to quit browsing and to return to standby mode.
Empty the cache
The information or services you have accessed are stored in the cache
memory of the phone.
If you have tried to access or have accessed confidential information
requiring passwords (for example, your bank account), empty the cache of
your phone after each use. To empty the cache, select Options→ Clear cache.
[ 125 ]
Glossary: A cache is a buffer memory that is used to store
data temporarily.
14
• BROWSER SETTINGS
•
Default access point - If you want to change the default access point,
press to open a list of available access points. The current default
access point is highlighted. For more information, see “Connection
•
Show images - Choose if you want to view pictures when you are
browsing. If you choose No, you can later load images during browsing
by selecting Options→ Show images.
•
•
•
•
Text wrapping - Choose Off if you do not want the text in a paragraph
to automatically wrap, or On if you do.
Font size - You can choose five text sizes in the browser: Smallest,
Small, Normal, Large and Largest.
Cookies - Allow /Reject. You can enable or disable the receiving and
sending of cookies.
Confirm touch tones - Always / First sending only. The browser supports
functions you can access while browsing. You can: make a voice call
while you are on a browser page, send touch tones while a voice call
is in progress, save in Contacts a name and phone number from a
browser page. Choose whether you want to confirm before the phone
sends touch tones during a voice call.
[ 126 ]
Applications (Java™)
15
15 Applications (Java™)
Note: Your phone must be switched on to use this function.
Do not switch the phone on when wireless phone use is
prohibited or when it may cause interference or danger.
Go to Menu→ Applications
Options in the Applications main view are: Open, View details, Settings,
Remove, Go to URL address, Update, Help, and Exit.
In the Applications main view you can open installed Java applications or
remove them. In the Install view you can install new Java applications
(file extensions .JAD or .JAR).
Note: Your phone supports J2ME™Java applications. Do not download
PersonalJava™ applications to your phone as they cannot be installed.
When you open Applications, you can see a list
of Java applications that have been installed to
your phone.
•
Scroll to an application and select Options→
View details to view:
•
Status - Installed, Running, or Downloaded
(shown only in Install view)
•
•
•
•
•
•
Version - the application version number
Supplier - the supplier or manufacturer of the application
Size - the size of the application file in kilobytes
Type - a brief description of the application
URL - an address of an information page on the Internet
Data - the size of application data such as high scores, in kilobytes
To start a data connection and to view extra information about the
application, scroll to it and select Options→ Go to URL address.
[ 127 ]
•
To start a data connection and to check if there is an update available
for the application, scroll to it and select Options→ Update.
15
• INSTALL A JAVA APPLICATION
Options in the Install view are: Install, View details, Delete, Help, and Exit.
Installation files may be transferred to your phone from a computer,
downloaded during browsing, or sent to you in a multimedia message, as
an e-mail attachment, via Bluetooth, or via infrared. If you are using
PC Suite for Nokia 3650 or PC Suite for Nokia 3600 to transfer the file, place
it in the c:\nokia\installs folder in your phone.
Important: Only install software from sources that offer adequate
protection against viruses and other harmful software.
1
In the Applications main view, to view the installation packages, press
to open the Downloaded view.
Note: In the Install view, you can only install Java software installation
files with the extension .JAD or .JAR.
2
To install an application, scroll to an installation file and select
Options→ Install.
Alternatively, search the phone memory for the installation file, select the
file, and press to start the installation.
Example: If you have received the installation file as an e-mail
attachment, go to your mailbox, open the e-mail, open the
Attachments view, scroll to the installation file, and press
start the installation.
to
1
Press Yes to confirm the installation.
The .JAR file is required for installation. If it is missing, the phone may
ask you to download it. If there is no access point defined for Applications,
you will be asked to select one. When you are downloading the JAR file,
you may need to enter a user name and password to access the server.
You obtain these from the supplier or manufacturer of the application.
[ 128 ]
Applications (Java™)
During installation, the phone checks the integrity of the package to
be installed. The phone shows information about the checks being
carried out, and you are given options whether to continue with or
cancel the installation. Once the phone has checked the integrity of
the software package, the application is installed on your phone.
15
2
The phone informs you when installation is complete.
To open the Java application after installation, you must go to the
Applications main view.
Tip: When you are browsing WAP or browser pages, you can download
an installation file and install it immediately. Note, however, that the
connection is left running in the background during installation.
Opening a Java application
•
Scroll to an application in the Applications main view and press
to open it.
Uninstalling a Java application
•
Select the application in the Applications main view and select
Options→ Remove.
• JAVA APPLICATION SETTINGS
To define a default access point for downloading missing application
components, select Settings→ Default access point. For more information
Select an application and select Settings, and then select one of:
•
Access point - Select an access point to be used by the application for
downloading extra data.
•
Network connection - Some Java applications may require a data
connection to be made to a defined access point. If no access point
has been selected, you will be asked to select one. The options are:
Allowed - The connection is created immediately without a notification.
Ask first - You will be asked before the application makes the connection.
Not allowed - Connections are not allowed.
[ 129 ]
16
16 Manager
• INSTALL APPLICATIONS AND SOFTWARE
Note: Your phone must be switched on to use the functions in the Tools
folder. Do not switch the phone on when wireless phone use is
prohibited or when it may cause interference or danger.
Go to Menu→ Tools→ Manager
In Manager you can install new applications and software packages, and
remove applications from your phone. You can also check the memory
consumption.
Options in the Manager main view are:Viewdetails, Viewcertificate, Install,
Remove, View log, Send log, Memory details, Help, and Exit.
When you open Manager, you can see a list of:
•
•
•
installation packages that have been saved to Manager
partially installed applications (indicated by ), and
fully installed applications that you can remove (indicated by
)
Note: In Manager, you can only use device software installation files
with an extension .SIS.
Tip: To install Java™ applications (file extension .JAD or .JAR), go to
Applications. For further information, see “Applications (Java™)”
•
Scroll to an installation file and select Options→View details to view the
Name, Version, Type, Size, Supplier, and Status of the software package.
•
Scroll to a software package and select Options→ View certificate to
display the security certificate details of a software package. See
Important: Only install software from sources that offer adequate
protection against viruses and other harmful software.
[ 130 ]
Manager
To help you, the software installation system uses digital signatures and
certificates on software packages. Do not install the application if Manager
gives a security warning during installation.
16
Tip: Select Options→ View log to see what software packages have been
installed or removed and when.
• INSTALL SOFTWARE
You can install applications that are specifically intended for Nokia 3600
series phones or suitable for the Symbian operating system. A software
package is usually one large compressed file containing many component files.
Note: If you install a program that is not intended specifically for Nokia
3600 series phones, it may function and look very different from
the usual Nokia 3600 series phone applications.
Important: If you install a file that contains an update or repair to an existing
application, you can only restore the original application if you
have the original installation file or a full back-up copy of the
removed software package. To restore the original application,
first remove the application and then install the application
again from the original installation file or the back-up copy.
1
Installation packages may be transferred to your phone from a computer,
downloaded during browsing, or sent to you in a multimedia message,
as an e-mail attachment, via Bluetooth, or via infrared. If you are
using PC Suite for Nokia 3650 or PC Suite for 3600 to transfer the file,
place it in the c:\nokia\installs folder on your phone.
Example: If you have received the installation file as an e-mail
attachment, go to your mailbox, open the e-mail, open the
Attachments view, scroll to the installation file, and press
start the installation.
to
2
Open Manager, scroll to the installation package, and select Options→
Install to start the installation.
Alternatively, search the phone memory or the memory card for the
installation file, select the file, and press
to start the installation.
[ 131 ]
If you are installing software without a digital signature or a certificate, the
phone warns you of the risks of installing software. Continue installation only
if you are absolutely sure of the origin and contents of the software package.
16
During installation, the phone checks the integrity of the package to be
installed. The phone shows information about the checks being carried out
and you are given options whether to continue or cancel the installation.
Once the phone has checked the integrity of the software package, the
application is installed on your phone.
Tip: To send your installation log to a help desk so that they can see what
has been installed or removed, select Options→ Send log→ Via text
message or Viae-mail (available only if the correct e-mail settings are
in place).
• REMOVE SOFTWARE
1
To remove a software package, scroll to it and select Options→ Remove.
2
Press Yes to confirm the removal.
Important: If you remove software, you can only re-install it if you have
the original software package or a full back-up of the removed
software package. If you remove a software package, you may
nolonger be able to open documentscreated with that software.
If another software package depends on the software package
that you removed, the other software package may stop working.
Refer to the documentation of the installed software package
for details.
• VIEW MEMORY CONSUMPTION
•
To open the memory view select Options→ Memory details.
Note: If you have a memory card installed on your phone, you will have
a choice of two memory views, one for the phone or Phone memory
and one for the Memory card. If not, you will only have the Phone
memory view.
[ 132 ]
Manager
When you open either of the memory views, the phone calculates the amount
of free memory for storing data and installing new software. In the memory
views, you can view the memory consumption of the different data groups:
Calendar, Contacts, Documents, Messages, Images, Sound files, Video clips,
Applications, Mem. in use, and Free memory.
16
Tip: If the phone memory is getting low, remove some documents, or
move them to the memory card. See also the “Technical information”
[ 133 ]
17
17 Connectivity
Note: Your phone must be switched on to use the functions in the
Connectivity folder. Do not switch the phone on when wireless
phone use is prohibited or when it may cause interference or danger.
You can transfer data from your phone to another compatible device, for
example, a phone or a computer, via Bluetooth or infrared.
• BLUETOOTH CONNECTION
Go to Menu → Connectivity→ Bluetooth
Bluetooth enables cost-free wireless
connections between electronic devices within
a maximum range of 30 feet. A Bluetooth
connection can be used to send images, texts,
business cards, calendar notes, or to connect
wirelessly to Bluetooth enabled devices such
as computers.
Since Bluetooth devices communicate using
radio waves, your phone and the other
Bluetooth device do not need to be in direct
line-of-sight.
The two devices only need to be within a
maximum of 10 meters of each other, although the connection can be
subject to interference from obstructions such as walls or from other
electronic devices.
Using Bluetooth consumes the battery and the phone's operating time
will be reduced. Take this into account when performing other operations
with your phone.
There may be restrictions on using Bluetooth devices. Check with your
local authorities.
[ 134 ]
Connectivity
Activate the Bluetooth application for the first time
When you activate the Bluetooth application
for the first time, you are asked to give a
17
Bluetooth name to your phone.
Note: After you have set Bluetooth to be
active and changed Myphone'svisibility
to All, your phone and this name can be
seen by other Bluetooth device users.
Write a name (max. 30 letters) or use the
default name ‘Nokia 3650’ or ‘Nokia 3600’. If
you send data via Bluetooth before you have
given an individual Bluetooth name to your
phone, the default name will be used.
Tip: To send text via Bluetooth (instead of text messages), go to Notes,
write the text, and select Options→ Send→ via Bluetooth.
Bluetooth settings
To modify Bluetooth settings, scroll to the setting you want to change
and press
.
•
•
•
Bluetooth - Select On if you want to use Bluetooth. If you set Bluetooth
Off all active Bluetooth connections are ended and Bluetooth cannot
be used for sending or receiving data.
My phone's visibility - If you select Shown toall, your phone can be found
by other Bluetooth devices during device search. If you select Hidden,
your phone cannot be found by other devices during device search.
My Bluetooth name - Define a Bluetooth name for your phone. After
you have set Bluetooth to be active and changed My phone's visibility
to All, this name can be seen by other Bluetooth device users.
Tip: When searching for devices, some Bluetooth devices may show only
the unique Bluetooth addresses (device addresses). To find out what
the unique Bluetooth address of your phone is, enterthe code *#2820#
in standby mode.
[ 135 ]
Send data via Bluetooth
17
Note: There can be only one active Bluetooth connection at a time.
1
Open an application where the item you
wish to send is stored. For example, to send
a photo to another device, open the Images
application.
2
3
Scroll to the item you want to send, for
example, a photo and select Options→
Send→ Via Bluetooth.
The phone starts to search for devices
within range. Bluetooth enabled devices that are within range start
to appear on the display one by one. You can see a device icon, the
device’s Bluetooth name, the device type, or a short name. Paired
devices are shown with
.
Note: If you have searched for Bluetooth devices earlier, a list of the
devices that were found previously is shown first. To start a new
search, select More devices. If you switch off the phone, the list
of devices is cleared and the device search needs to be started
again before sending data.
•
To interrupt the search, press Stop. The device list freezes and you
can start to form a connection to one of the devices already found.
4
5
Scroll to the device you want to connect with and press Select. The item
you are sending is copied to Outbox and the note Connecting is shown.
Pairing (if not required by the other device, see step 6).
Glossary: Pairing means authentication. The users of the Bluetooth
enabled devices should agree on the passcode and use the same
passcode for both devices in order to pair them. Devices that do
not have a user interface have a factory set passcode.
•
If the other device requires pairing before data can be transmitted,
a tone sounds and you are asked to enter a passcode.
[ 136 ]
Connectivity
•
•
Create your own passcode (1-16 characters long, numeric) and agree
with the owner of the other Bluetooth device to use the same code.
This passcode is used only once and you do not have to memorize it.
17
After pairing, the device is saved to the Paired devices view.
6
When the connection has been successfully established, the note
Sending data is shown.
Note: Data received via Bluetooth can be found in the Inbox folder in
Note: If sending fails, the message or data will be deleted. The Drafts
folder in Messaging does not store messages sent via Bluetooth.
Icons for different Bluetooth devices
Computer
Phone
Other
Unknown
Check the status of the Bluetooth connection
•
•
•
When
When
When
is shown in standby mode, Bluetooth is active.
is blinking, your phone is trying to connect to the other device.
is shown continuously, the Bluetooth connection is active.
Paired devices view
Options in the paired devices view are: New paired device, Connect /
Disconnect, Assign short name, Delete, Delete all, Set as authorized / Set as
unauthorized, Help, and Exit.
Pairing with a device makes device searches easier and quicker. Paired devices
are easier to recognize, they are indicated by
the Bluetooth main view, press to open a list of paired devices (
in the search result list. In
).
[ 137 ]
PAIR WITH A DEVICE
17
1
Select Options→Newpaireddevice in the Paired devices view. The phone
starts to search for devices within range. Or, if you have searched for
Bluetooth devices earlier, a list of the devices that were found previously
is shown first. To start a new search, select More devices.
2
3
Scroll to the device you want to pair with and press Select.
Exchange passcodes, see step 5 (Pairing) in the previous section.
The device is added to the Paired devices list.
Tip: You can also play phone-to-phone games via Bluetooth.
CANCEL PAIRING
•
In the Paired devices view, scroll to the device whose pairing you want
to cancel and press
removed from the Paired devices list and the pairing is cancelled.
or select Options→ Delete. The device is
•
If you want to cancel all pairings, select Options→ Delete all.
Note: If you are currently connected to a device and delete the pairing
with that device, pairing is removed immediately but the connection
will remain active.
ASSIGN SHORT NAMES FOR PAIRED DEVICES
You can define a short name (nickname, alias), to help you recognize a
certain device. This name is stored in the phone memory and cannot be
seen by other Bluetooth device users.
Example: Give a short name to your friend’s Bluetooth enabled
device or to your own computer to be able to recognize it more easily.
To assign a short name, scroll to the device and select Options→ Assign
short name. Write the short name and press OK.
Note: Choose a name which is easy to remember and recognize. Later when
you are searching for devices or a device is requesting a connection,
the name you have chosen will be used to identify the device.
[ 138 ]
Connectivity
SET A DEVICE TO BE AUTHORIZED OR UNAUTHORIZED
After you have paired with a device, you can
set it to be authorized or unauthorized:
17
Unauthorized (default) - Connection requests
from this device need to be accepted separately
every time.
Authorized - Connections between your
phone and this device can be made without
your knowledge. No separate acceptance or
authorization is needed. Use this status for
your own devices, for example, your PC, or
devices that belong to someone you trust. The icon is added next to
authorized devices in the Paired devices view.
In the Paired devices view, scroll to the device and select Options→ Set as
authorized / Set as unauthorized.
Receive data via Bluetooth
When you receive data via Bluetooth, a tone sounds and you are asked if
you want to accept the Bluetooth message. If you accept,
the item is placed in the Inbox folder in Messaging. Bluetooth messages are
is shown and
Disconnect Bluetooth
A Bluetooth connection is disconnected automatically after sending or
receiving data.
• INFRARED CONNECTION
To start infrared, go to Menu→ Connectivity→ Infrared.
Via infrared, you can send or receive data such as business cards and
calendar notes to and from a compatible phone or data device.
Do not point the IR (infrared) beam at anyone's eye or allow it to interfere
with other IR devices. This device is a Class 1 Laser product.
[ 139 ]
Send and receive data via infrared
17
Note: All items which are received via infrared are placed in the Inbox
folder in Messaging. New infrared messages are indicated by
See page 83 for further information.
.
1
Make sure that the infrared ports of the sending and receiving devices
are pointing at each other and that there are no obstructions between
the devices. The preferable distance between the two devices is one
meter at most. To find the infrared port, see the picture of the different
keys in the General information section of this guide.
2
3
The user of the receiving device activates the infrared port.
To activate the infrared port of your phone to receive data via infrared,
go to Menu→ Connectivity→ Infrared and press
.
The user of the sending device selects the desired infrared function to
start data transfer.
To send data via infrared, select Options→ Send→ via infrared in
an application.
If data transfer is not started within two minutes after the activation of
the infrared port, the connection is cancelled and must be started again.
Tip: You can also play phone-to-phone games via infrared.
Example: To send a contact card via infrared: (1) Ask the receiver
to activate the infrared port in his/her device. (2) Go to Contacts,
scroll to a card and select Options→ Send→ via infrared.
Note: Windows 2000: To be able to use infrared to transfer files between
your Nokia 3600 series phone and a compatible computer, go to
“Control Panel” and select “Wireless Link”. In the “Wireless Link” “File
Transfer” tab check the “Allow others” to send files to your
computer using infrared.
Check the status of the infrared connection
•
When
blinks, your phone is trying to connect to the other device
or a connection has been lost.
•
When
is shown continuously, the infrared connection is active
and your phone is ready to send and receive data via its infrared port.
[ 140 ]
Connectivity
• CONNECT YOUR PHONE TO A COMPUTER
17
For further information on how to make a connection to a compatible
computer via infrared or Bluetooth and how to install the PC Suite for
Nokia 3650 or PC Suite for 3600, see the Installation Guide for PC Suite
on the CD-ROM in the ‘Software for PC’ section. For further information
on how to use the PC Suite for Nokia 3650 or PC Suite for 3600, see the
PC suite online help.
Use the CD-ROM
The CD-ROM should launch itself after you have inserted it into the CD-ROM
drive of your compatible PC. If not, proceed as follows:
1
2
Click the Window Start button and select Programs→ Windows Explorer.
On the CD-ROM drive, locate a file called Nokia3650.exe or
Nokia3600.exe and double-click it. The CD-ROM interface opens.
3
You can find PC Suite for Nokia 3650 or PC Suite for 3600 in the
‘Software for PC’ section. Double-click ‘PC Suite for Nokia 3650’ or
‘PC Suite for 3600’. The installation wizard will guide you through the
installation process.
• USE YOUR PHONE AS A MODEM TO
CONNECT TO THE INTERNET OR TO SEND
OR RECEIVE FAXES
Detailed installation instructions can be found in Quick guide for Modem
Options for Nokia 3650 or Quick Guide for Modem Options for Nokia
3600 on the CD-ROM supplied with the phone.
[ 141 ]
18
18 PC Suite for Nokia 3600 series
Please refer to other sections of this user guide for instructions on
operation, care, and maintenance, including important safety information.
This section explains how to install PC Suite for Nokia 3600 series phones
on a compatible PC, how to connect your phone to the PC, and how to
start using PC Suite. For more detailed information on the use of PC Suite,
please refer to the online help of the PC Suite applications.
With PC Suite for Nokia 3650 or PC Suite for Nokia 3600 you can:
•
•
Share information between your PC and phone.
Make back-up copies of the phone files to protect data in case of loss
or damage.
•
Synchronize your calendar, contacts, and tasks with Microsoft and
Lotus applications.
•
•
Copy and move files between your PC and phone.
Copy contacts and calendar information from another Nokia mobile
phone, Nokia communicator, or Palm device to your Nokia 3600 series
phone.
•
•
Configure phone settings.
Install software on your phone.
• SOFTWARE AND HARDWARE REQUIREMENTS
To install and run PC Suite, you need:
•
a compatible PC running Windows 98, Windows ME, Windows 2000
with Service Pack 2, or Windows XP.
•
at least 110 MB of free disk space.
To connect your Nokia 3600 series phone to the PC, you need to have:
•
•
an infrared connection: an infrared port on the computer, or
a Bluetooth connection: a Bluetooth card and the required software,
or built-in support for Bluetooth on the PC. To be able to connect your
Nokia 3600 series phone to your PC, the Bluetooth software needs to
support the Serial Port Profile (SPP).
[ 142 ]
PC Suite for Nokia 3600 series
• INSTALL PC SUITE
18
PC Suite for Nokia 3600 series is in the “Install” section of the CD-ROM
included in the PC Suite for Nokia 3600 series package. The CD-ROM should
launch automatically after you have inserted it into the CD-ROM drive of
your PC. If not, proceed as follows:
1
Click the Windows Start button, point to Programs, and select
Windows Explorer.
2
Go to the CD-ROM root directory and double-click the Nokia3650.exe
or Nokia3600.exe file. The CD-ROM user interface opens.
When the CD-ROM interface is open, proceed as follows:
1
2
Click Install.
Select Install now and click PC Suite for Nokia 3650 or PC Suite for
Nokia 3600.
3
Select the language for the installation and click Next to start the
installation wizard. This wizard will guide you through the installation
process. Generally, it is recommended that you accept the suggested
destination folder and program folder.
Note: In the Data Import dialog box, make sure that the Install the Nokia
Connectivity SDK check box is selected if you want to transfer
calendar and contacts data from another Nokia mobile phone to your
Nokia 3600 series phone. If you do not install the Nokia Connectivity
SDK component, you can transfer data only from the Nokia 9110
Communicator, a Palm device, a Nokia 7650 or another Nokia 3600
series phone to your Nokia 3600 series phone.
Note: In the File Transfer Video and Audio Converters dialog box it is
recommended that you leave the Install Video and Audio Converters
check box selected. When the converters are installed, video and
audio format files that you copy from the PC to your Nokia 3600
series phone are automatically converted to the video and audio
format used by the phone.
If you do not have the CD-ROM:
1
Download the installation file (setup.exe).
[ 143 ]
2
3
Go to the directory where you downloaded the file and double-click it.
Follow the instructions on the screen.
18
• CONNECT YOUR PHONE TO THE PC
When you use PC Suite for the first time, you must connect your Nokia 3600
series phone to the PC. Thereafter, you can use PC Suite whether or not your
phone is connected to your PC.
You can connect your phone to the PC via an infrared or Bluetooth connection.
See the Connecting your Nokia 3650 to a PC and Disconnecting and
reconnecting your Nokia 3650 or Connecting your Nokia 3600 to a PC and
Diconnecting and reconnecting your Nokia 3600 online help topics for details.
Note: When you connect your Nokia 3600 series phone to your PC,
PC Suite automatically synchronizes the clock on the Nokia 3600
series phone with the PC. Therefore, you need to make sure that
the clock on your PC is correct.
Tip: Check the icons on the taskbar to see the connection status. The
connection icon
to the PC.
changes to
when your phone is connected
Use an infrared connection
1
Check that an infrared driver is already installed on the PC. Go to the
Windows Control Panel. If the Infrared icon is visible, the driver has
been installed. Also check that infrared is enabled on the PC. Note
that in Windows 2000 the infrared connection is called Wireless Link.
Note: To be able to use an infrared connection with Windows 2000, you
must first disable the Image Transfer application in the Wireless
Link software.
2
Double-click the PC Suite Connection icon on the taskbar to open the
Connection Properties dialog box. Make sure that the correct COM
port is selected for the infrared connection. If no port is selected,
select the COM port with infrared as the connection type. Note that
you can select more than one COM port.
[ 144 ]
PC Suite for Nokia 3600 series
Note: If you cannot select the port you want to use, another PC application
is using that port. To use PC Suite with that port, you must either
close the other application or disable it temporarily.
18
3
Make sure that the infrared port of the phone faces the infrared port
of the PC and that they are within range of each other.
4
Activate the infrared connection of your phone. Go to Menu, open the
Connectivity folder, and select Infrared.
Use a Bluetooth connection
Note: Before you can connect your Nokia 3600 series phone to the PC via
Bluetooth for the first time, you must have provided a name for
your phone to be used in a Bluetooth connection. For instructions on
giving a name to your phone, see “Activate the Bluetooth application
on the phone to make your Nokia 3600 series phone discoverable
and connectable. Go to Connectivity and select Bluetooth. Then
select Bluetooth On. To make your phone discoverable, change My
phone’s visibility to Shown to all in the Bluetooth menu.
To establish a Bluetooth connection:
1
Make sure that a Bluetooth card is inserted in the PC card or
CompactFlash (CF+) slot and that the software provided with the
Bluetooth card is installed on the PC, or check that your PC includes
built-in support for Bluetooth. A serial port profile must exist for the
Bluetooth card on the PC. For further information, see the user
documentation provided with the Bluetooth card or PC.
2
3
Establish a serial port connection between your Nokia 3600 series
phone and your PC. For information on how to do this, refer to the
user documentation of the Bluetooth software.
Double-click the PC Suite Connection icon on the taskbar to open the
Connection Properties dialog box. Make sure that the correct port is
selected for the Bluetooth connection. If no port is selected, select the
COM port with Bluetooth as the connection type. Note that you can
select more than one COM port.
[ 145 ]
Note: If you cannot select the port you want to use, another PC application
is using that port. To use PC Suite with that port, you must either
close the other application or disable it temporarily.
18
4
If you are connecting your Nokia 3600 series phone to your PC using
a Bluetooth connection for the first time, you need to pair the devices.
To pair the devices, you need to enter a passcode in both devices. Create
your own passcode (1-16 characters long, numeric) and enter the same
passcode in both the phone and the PC when requested. This passcode
is used only once and you do not need to memorize it. For further
5
Authorize the connection between your Nokia 3600 series phone and
your PC. Select Yes when a connection request appears on the phone’s
display. You can set your PC as authorized, which means that the
connection between your phone and your PC is made without separate
authorization. To do this, go to the Paired devices view on your phone,
scroll to the device, and select Options. Select Set as authorized.
Since Bluetooth devices communicate using radio waves, your phone and
the other Bluetooth device do not need to be in line of sight. The two devices
only need to be within a maximum of about 30 feet (10 meters) of each other,
although the connection can be subject to interference from obstructions
such as walls or from other electronic devices.
There may be restrictions on using Bluetooth devices. Check with your
local authorities.
The Bluetooth connection does not close automatically. You must close it
from the Bluetooth software on your PC. Close the Bluetooth connection
when you stop using PC Suite for Nokia 3650 or PC Suite for Nokia 3600
in online mode.
Tip: You can find the online help from the Windows Start button. Point to
Programs and select PC Suite for Nokia 3650 or PC Suite for 3600 and
PC Suite for 3650 Help or PC Suite for 3600 Help.
[ 146 ]
PC Suite for Nokia 3600 series
Note: If you have problems connecting your phone to the PC, check to
see if both your Nokia 3600 series phone and your PC are switched
on and that you have selected the correct communications port.
See the Connecting your Nokia 3650 to a PC and Disconnecting
and reconnecting your Nokia 3650 or Connecting your Nokia 3600
to a PC andDisconnecting and reconnecting your Nokia 3600 online
help topics for details.
18
• START TO USE PC SUITE
You can start PC Suite from the Start menu: click the Start button, select
Programs and point to PC Suite for Nokia 3650 orPC Suite for Nokia 3600, and
then click PC Suite for Nokia 3650 or PC Suite for Nokia 3600.
If you are connecting your phone to the PC for the first time, after starting
PC Suite you are asked to do two things:
•
Name your phone.
You can use more than one Nokia 3600 series phone with PC Suite. To be
able to identify individual phones, you must give a name to your phone.
Select tasks to be created.
•
To be able to back up and synchronize information between your Nokia
3600 series phone and PC, you must have the appropriate tasks created.
During the first connection, PC Suite lists tasks that can be created
automatically. You do not have to create these tasks at this point, if you
do not want to. However, if you create the tasks, you can edit them later.
To create these tasks, proceed as follows:
1
When the first connection is established, the Welcome to PC Suite for
Nokia 3650 or Welcome to PC Suite for Nokia 3600 dialog box appears.
Type a name for your phone in the box and click OK.
2
Next, you will be asked for tasks that you want to perform with PC Suite.
In the Create Tasks dialog box, select the tasks that you want PC Suite
to create and click OK. You can edit these tasks later, if you want.
Note: Making or answering phone calls during a PC connection is not
recommended. It might disrupt operation.
Tip: The folders on your PC that contain information about your phone will
also be named according to the name you give your phone at this point.
[ 147 ]
• ONLINE AND OFFLINE MODES
18
You can use PC Suite either in online mode or in offline mode. You have
the following options:
•
Work online - Connect your phone to the PC and let PC Suite identify
it. In online mode your phone is connected to your compatible PC, and
you can work with the information stored on the phone.
•
Work offline - Leave your phone disconnected and choose the name
of your phone from a list of named devices.
The menus and other available options in offline mode differ from those
of online mode.
• CONNECTION STATUS
The icon on the right-hand side of the status bar and on the Windows
taskbar displays the connection status as follows:
•
•
•
Disconnected
Connected
Transferring data (animated icon)
[ 148 ]
PC Suite for Nokia 3600 series
• MAIN WINDOW INFORMATION
18
The main window of PC Suite displays the following information and controls:
toolbarshortcutsfor
menu commands
menu commands
the name of the application
that is currently open
information about
the selected
command
the name of the
connected phone
connection
status
application bar
[ 149 ]
• PC SUITE APPLICATIONS
18
A number of icons are displayed on the left-hand side of the PC Suite
window - this area is known as the application bar. To use an application,
click its icon. For information on using an application, see the online help.
Backup/Restore
With Backup/Restore, you can back up information on your phone. If you
ever lose information from your Nokia 3600 series phone (for example,
through accidental deletion), or need to refer to an earlier, backed up version,
you can restore it to your phone. Backup/Restore supports Memory cards.
Note: Operator logos, ringing tones (polyphonic ringing tones (MIDI) and
single tones) and Java-applications that you have installed on your
Nokia 3600 series phone after you first started using it are not
saved during backup. Therefore these items cannot be restored.
Only the original Nokia 3600 series ringing tones are saved.
Control Panel
You can use Control Panel to change some of the general settings of PC
Suite. The following features are included in Control Panel:
•
•
•
Connection enables you to specify the port that PC Suite uses when
attempting to connect to a phone.
Data Location enables you to specify where you want to store backups
and synchronization files.
Device Manager enables you to see which phones have been connected
to your PC, and to remove details of phones that you no longer want
to connect.
Important: You cannot restore information that you have removed using
Device Manager.
•
File Transfer Converters enables you to select which, if any, video and
audio converters are used when files are copied to the phone using
File Transfer.
[ 150 ]
PC Suite for Nokia 3600 series
Data Import
18
With Data Import, you can transfer contacts and calendar data to your
Nokia 3600 series phone from the Nokia 3320, Nokia 3360, Nokia 3600,
Nokia 3650, Nokia 6210, Nokia 6250, Nokia 6310, Nokia 6310i, Nokia 6320,
Nokia 6340, Nokia 6340i, Nokia 6360, Nokia 6370, Nokia 6385, Nokia 6510,
Nokia 6590, Nokia 6610, Nokia 6650, Nokia 7110, Nokia 7160, Nokia 7190,
Nokia 7210, Nokia 7650, Nokia 8210, Nokia 8290, Nokia 8310, Nokia 8390,
Nokia 8810, Nokia 8850, Nokia 8890, Nokia 8910, Nokia 9110 Communicator,
or Palm device.
Synchronize
With Synchronize, you can synchronize your phone contacts and calendar
data with Microsoft and Lotus applications.
To be able to synchronize, you must have tasks created for synchronization.
When you connect your Nokia 3600 series phone to your PC for the first
time, PC Suite identifies your phone and creates a number of tasks. You can
modify these tasks and create other tasks if you want. You can also schedule
tasks to be run at regular intervals, every time you connect your phone to
your PC, or on command only.
An animated icon appears on the Windows taskbar when synchronization
is in progress:
Synchronizing your phone with the PC (animated icon).
File Transfer
With File Transfer, you can copy files between your phone and your PC, as well
as delete and rename selected files. With the Multimedia converters, video
and audio format files that you copy from the PC to your Nokia 3600 series
phone are automatically converted to the video and audio format used by the
phone.
Image Transfer
With Image Transfer, you can copy, move, rename, and delete image files
on your phone and your PC. You can also view image files if there is an
associated viewer application.
[ 151 ]
Settings wizard
18
With the Settings wizard, you can configure the e-mail account, remote
connection, message center, and multimedia message center settings of
your phone. For example, you can manage settings manually or copy a
working configuration from the PC to the phone. You can also back up
your phone settings to a file.
Install software on your phone
With PC Suite, you can install Java and device software on your phone.
These applications do not have an icon on the application bar. Instead, you
can start these applications from the Tools menu. See the Installing device
software online help topic for details.
Note: Installation packages can be received in a multimedia message, as
an e-mail attachment, via Bluetooth, or via infrared and downloaded
to your phone. If you are using PC Suite to transfer the file, save it
to the c:\nokia\installs folder.
Note: You can only use Java installation files with the extension .JAD or
.JAR, and device software installation files with the extension .SIS.
Important: Only install software from sources that offer adequate
protection against viruses and other harmful software.
• REMOVE PC SUITE FROM YOUR PC
Uninstalling PC Suite removes all files and folders that were added by the
PC Suite installation program, but does not remove backed-up and archived
files or synchronization information. Therefore, if you reinstall PC Suite you
can back up, restore, and synchronize using the same settings as before.
Note: If you want to remove backed-up files, synchronizations, and other
information relating to the phones you have connected, you must
do this before removing PC Suite. For further information, see the
Viewing and removing details of a Nokia 3650 or Viewing and removing
details of a Nokia 3600 online help topics.
[ 152 ]
PC Suite for Nokia 3600 series
To remove PC Suite, proceed as follows:
18
1
Click the Windows Start button, point to Settings, and click
Control Panel.
2
3
Double-click Add/Remove Programs.
Select PC Suite for Nokia 3650 or PC Suite for 3600 from the list of
installed programs. Click Add/Remove. A confirmation dialog box opens.
4
After confirming that you want to remove PC Suite from your PC, the
uninstall program removes the program files and informs you that
you need to restart your PC to complete the uninstall process. When
your PC restarts, the uninstall program completes the removal of PC
Suite from your PC.
Note: Uninstalling PC Suite does not remove the Nokia Connectivity SDK.
You can remove the Nokia Connectivity SDK from your PC using the
Add/Remove Programs application of the Windows Control Panel.
The uninstall program leaves some files on your PC that contain information
about the Nokia devices you have connected to your PC. If you decide to
reinstall PC Suite, you will be able to continue using PC Suite as before.
Important safety notes
All the safety instructions in the user guides of your phone and computer
also apply when this product is used with the phone.
Remember to make back-up copies of all important data to protect
against possible loss or alteration.
[ 153 ]
19
19 Reference information
• BATTERY STATEMENTS
Charging and Discharging
Your phone is powered by a rechargeable battery.
Note that a new battery's full performance is achieved only after two or
three complete charge and discharge cycles!
The battery can be charged and discharged hundreds of times but it will
eventually wear out. When the operating time (talk-time and standby time)
is noticeably shorter than normal, it is time to buy a new battery.
Use only batteries approved by the phone manufacturer and recharge your
battery only with the chargers approved by the manufacturer. Unplug the
charger when not in use. Do not leave the battery connected to a charger
for longer than a week, since overcharging may shorten its lifetime. If left
unused a fully charged battery will discharge itself over time.
Temperature extremes can affect the ability of your battery to charge.
Use the battery only for its intended purpose.
Never use any charger or battery that is damaged.
Do not short-circuit the battery. Accidental short-circuiting can occur
when a metallic object (coin, clip or pen) causes direct connection of the
+ and - terminals of the battery (metal strips on the battery) for example
when you carry a spare battery in your pocket or purse. Short- circuiting
the terminals may damage the battery or the connecting object.
Leaving the battery in hot or cold places, such as in a closed car in summer
or winter conditions, will reduce the capacity and lifetime of the battery.
Always try to keep the battery between 15°C and 25°C (59°F and 77°F).
A phone with a hot or cold battery may temporarily not work, even when
the battery is fully charged. Batteries' performance is particularly limited
in temperatures well below freezing.
Do not dispose of batteries in a fire!
[ 154 ]
Reference information
Dispose of batteries according to local regulations (e.g. recycling). Do not
dispose as household waste.
19
Remove the battery only when the phone is switched off.
• USE PROPER CARE AND MAINTENANCE
Your phone is a product of superior design and craftsmanship and should
be treated with care. The suggestions below will help you to fulfill any
warranty obligations and to enjoy this product for many years.
•
•
•
•
Keep the phone and all its parts and accessories out of the reach of
small children.
Keep the phone dry. Precipitation, humidity and all types of liquids or
moisture can contain minerals that will corrode electronic circuits.
Do not use or store the phone in dusty, dirty areas. Its moving parts
can be damaged.
Do not store the phone in hot areas. High temperatures can shorten
the life of electronic devices, damage batteries, and warp or melt
certain plastics.
•
Do not store the phone in cold areas. When it warms up (to its normal
temperature), moisture can form inside, which may damage electronic
circuit boards.
•
•
Do not attempt to open the phone. Non-expert handling may damage it.
Do not drop, knock or shake the phone. Rough handling can break
internal circuit boards.
•
•
•
Do not use harsh chemicals, cleaning solvents, or strong detergents
to clean the phone.
Do not paint the phone. Paint can clog the moving parts and prevent
proper operation.
Use only the supplied oran approvedreplacement antenna. Unauthorized
antennas, modifications or attachments could damage the phone and
may violate regulations governing radio devices.
[ 155 ]
All of the above suggestions apply equally to your phone, battery, charger or
any accessory. If any of them is not working properly, take it to your nearest
qualified service facility. The personnel there will assist you and, if necessary,
arrange for service.
19
• UNDERSTAND IMPORTANT SAFETY INFORMATION
Traffic Safety
Do not use a hand-held telephone while driving a vehicle. Always secure
the phone in its holder; do not place the phone on the passenger seat or
where it can break loose in a collision or sudden stop.
Remember road safety always comes first!
Operating environment
Remember to follow any special regulations in force in any area and always
switch off your phone whenever it is forbidden to use it, or when it may
cause interference or danger.
Use the phone only in its normal operating positions.
Parts of the phone are magnetic. Metallic materials may be attracted to the
phone, and persons with a hearing aid should not hold the phone to the
ear with the hearing aid. Always secure the phone in its holder, because
metallic materials may be attracted by the earpiece. Do not place credit
cards or othermagnetic storage media near the phone, because information
stored on them may be erased.
Electronic devices
Most modern electronic equipment is shielded from radio frequency (RF)
signals. However, certain electronic equipment may not be shielded against
the RF signals from your wireless phone.
PACEMAKERS
Pacemaker manufacturers recommend that a minimum separation of 20 cm
(8 inches) be maintained between a handheld wireless phone and a
pacemaker to avoid potential interference with the pacemaker. These
recommendations are consistent with the independent research by and
recommendations of Wireless Technology Research. Persons with pacemakers:
[ 156 ]
Reference information
•
Should always keep the phone more than 20 cm (8 inches) from their
pacemaker when the phone is switched on;
19
•
•
Should not carry the phone in a breast pocket;
Should use the ear opposite the pacemaker to minimize the potential
for interference.
•
If you have any reason to suspect that interference is taking place,
switch off your phone immediately.
HEARING AIDS
Some digital wireless phones may interfere with some hearing aids. In the
event of such interference, you may want to consult your service provider.
Other medical devices
Operation of any radio transmitting equipment, including cellular phones,
may interfere with the functionality of inadequately protected medical
devices. Consult a physician or the manufacturer of the medical device to
determine if it is adequately shielded from external RF energy or if you
have any questions. Switch off your phone in health care facilities when
any regulations posted in these areas instruct you to do so. Hospitals or
health care facilities may be using equipment that could be sensitive to
external RF energy.
Vehicles
RF signals may affect improperly installed orinadequately shielded electronic
systems in motor vehicles (e.g. electronic fuel injection systems, electronic
anti-skid (anti-lock) braking systems, electronic speed control systems, air
bag systems). Check with the manufacturer or its representative regarding
your vehicle. You should also consult the manufacturer of any equipment
that has been added to your vehicle.
Posted facilities
Switch your phone off in any facility where posted notices so require.
[ 157 ]
Potentially explosive atmospheres
19
Switch off your phone when in any area with a potentially explosive
atmosphere and obey all signs and instructions. Sparks in such areas could
cause an explosion or fire resulting in bodily injury or even death.
Users are advised to switch off the phone when at a refueling point
(service station). Users are reminded of the need to observe restrictions on
the use of radio equipment in fuel depots (fuel storage and distribution
areas), chemical plants or where blasting operations are in progress.
Areas with a potentially explosive atmosphere are often but not always
clearly marked. They include below deck on boats; chemical transfer or
storage facilities; vehicles using liquified petroleum gas (such as propane
or butane); areas where the air contains chemicals or particles, such as
grain, dust or metal powders; and any other area where you would normally
be advised to turn off your vehicle engine.
Vehicles
Only qualified personnel should service the phone, or install the phone in
a vehicle. Faulty installation or service may be dangerous and may invalidate
any warranty which may apply to the unit.
Check regularly that all wireless phone equipment in your vehicle is mounted
and operating properly.
Do not store or carry flammable liquids, gases or explosive materials in the
same compartment as the phone, its parts or accessories.
For vehicles equipped with an air bag, remember that an air bag inflates
with great force. Do not place objects, including both installed or portable
wireless equipment in the area over the air bag or in the air bag deployment
area. If in-vehicle wireless equipment is improperly installed and the air
bag inflates, serious injury could result.
Aircraft
Using your phone while in the air is prohibited. Switch your phone off
before boarding an aircraft. The use of wireless telephones in an aircraft
may be dangerous to the operation of the aircraft, disrupt the wireless
telephone network and may be illegal.
[ 158 ]
Reference information
Failure to observe these instructions may lead to suspension or denial of
telephone services to the offender, or legal action or both.
19
Emergency calls
Important: This phone, like any wireless phone, operates using radio signals,
wireless, and landline networks as well as user-programed
functions. Because of this, connections in all conditions
cannot be guaranteed. Therefore you should never rely solely
upon any wireless phone for essential communications (for
example, medical emergencies).
Emergency calls may not be possible on all wireless phone networks or
when certain network services and/or phone features are in use. Check
with local service providers.
To make an emergency call:
1
If the phone is not on, switch it on. Check for adequate signal strength.
Some networks may require that a valid SIM card is properly inserted
in the phone.
2
3
4
Press
as many times as needed (e.g. to exit a call, to exit a menu,
etc.) to clear the display and ready the phone for calls.
Key in the emergency number for your present location (e.g. 911 or other
official emergency number). Emergency numbers vary by location.
Press the
key.
If certain features are in use, you may first need to turn those features off
before you can make an emergency call. Consult this guide and your local
cellular service provider.
When making an emergency call, remember to give all the necessary
information as accurately as possible. Remember that your wireless phone
may be the only means of communication at the scene of an accident -
do not cut off the call until given permission to do so.
[ 159 ]
• CERTIFICATION INFORMATION (SAR)
19
THIS MODEL PHONE MEETS GOVERNMENT REQUIREMENTS FOR EXPOSURE
TO RADIO WAVES
Your mobile phone is a radio transmitter and receiver. It is designed and
manufactured not to exceed the limits for exposure to radio frequency (RF)
energy set by Industry Canada. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for the general
population. The guidelines are based on standards that were developed by
independentscientific organisations through periodic and thorough evaluation
of scientific studies. The guidelines include a substantial safety margin
designed to assure the safety of all persons, regardless of age and health.
The exposure standard for mobile phones employs a unit of measurement
known as the Specific Absorption Rate, or SAR. The SAR limit set by the
Industry Canada is 1.6 W/kg* Tests for SAR are conducted using standard
operating positions with the phone transmitting at its highest certified
power level in all tested frequency bands. Although the SAR is determined
at the highest certified power level, the actual SAR of the phone while
operating can be well below the maximum value. This is because the phone
is designed to operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to a base
station, the lower the power output of the phone.
Before a phone model is available for sale to the public, compliance with
the Canadian Standard must be shown. The following values are the highest
SAR values for these phone models when tested for use at the ear and worn
on the body, as described in this user guide:
Phone model FCC ID#
Ear SAR value Body worn SAR value
Nokia 3600
Nokia 3650
QFXNHM-10 0.70 W/kg
QFXNHL-8 0.55 W/kg
1.27 W/kg
0.83 W/kg
(Body-worn measurements differ among phone models, depending upon
available accessories and Industry Canada requirements).
[ 160 ]
Reference information
While there may be differences between the SAR levels of various phones
and at various positions, they all meet the government requirement for
RF exposure.
19
* The SAR limit for mobile phones used by the public is 1.6 watts/kilogram
(W/kg) averaged over one gram of body tissue. The standard incorporates
a substantial margin of safety to give additional protection for the public
and to account for any variations in measurements. SAR values may vary
depending on national reporting requirements and the network band. For
SAR information in other regions please look under product information
at www.nokia.com.
[ 161 ]
• USE ACCESSORIES SAFELY
19
A few practical rules for accessory operation:
•
•
Keep all accessories out of the reach of small children.
When you disconnect the power cord of any accessory, grasp and pull
the plug, not the cord.
•
•
•
Check regularly that any vehicle-installed accessories are mounted
and are operating properly.
Installation of any complex car accessories must be made by qualified
personnel only.
Use only batteries, chargers, and accessories that have been approved by
the phone manufacturer. The use of any other types could invalidate
any approval or warranty applying to the phone and could be dangerous.
• ACCESSORIES
Original Nokia accessories ensure the best possible operation of your Nokia
mobile phone in various conditions.
Specifications are subject to change without notice. The availability of
particular products and services may vary by region. Please check with the
Nokia dealer nearest you. Operations and some features are network
dependent. Nokia enhancements enable the best possible operation of your
Nokia 3600 series mobile phone in various conditions. Variation in operation
times will occur depending on SIM card, network and usage settings, usage
style and environments. Please check the availability of WAP services with
your network operator and/or WAP service provider. The availability of
Bluetooth wireless technology may vary by country and Bluetooth products
are not approved for use everywhere. Please check with the local authorities.
[ 162 ]
Reference information
Audio accessories
19
WIRELESS HEADSET HDW-2
The Nokia Wireless Headset
HDW-2 is designed with
Bluetooth technology and is
compatible with Nokia 3600
series phones and phones
supporting the Bluetooth 1.1
specification and Headset or
Handsfree profiles.
The compact headset gives
hands-free control of your phone without cables or wires. The earpiece fits
in either ear allowing for convenient and discreet access to all basic call
controls. Then Answer/End button lets you answer and make calls, redial,
and switch the audio back and forth between the handset and headset. A
separate volume control lets you change the call volume as necessary
while moving from place to place.
To maximize call security, the headset also supports encyrption of the wireless
connection for compatible phone models.
HEADSET HDE-2
The HDE-2 headset is a small and lightweight
portable headset for easy handsfree operation. It
has a clip to hold the headset firmly in place.
HEADSET HDC-5
The HDC-5 headset, with a remote button,
connects directly to the phone. No extra adaptor
is required, and the remote control is provided.
DUAL HEADSET HDD-1
The HDD-1 Dual Headset provides comfortable handsfree operation with
a remote control button for answering and ending calls.
[ 163 ]
RETRACTABLE HEADSET HDC-10
The HDC-10 Retractable Headset is a compact headset
with a retractable mechanism and remote control.
19
BOOM HEADSET HDB-5
HDB-5 Headset provides handsfree functionality and
a new “over the ear” concept providing excellent
audio quality.
Battery
The 850 mAh, Li-Ion based BL-5C battery provides
power in a thin and light package. It provides a talk
time of up to 2-4 hours and up to 150-200 hours
standby time. Charging time is one hour and 35
minutes.
Variation in operation times will occur depending
on SIM card, network and usage settings, usage
style and environments. Talk time is reduced by 5 percent if Enhanced Full
Rate is active, and increased by up to 30% if Half Rate is active.
Chargers
Your Nokia 3600 series phone uses the
ACP-12U standard charger and mobile
chargers LCH-9 and LCH-12. The LCH-12
Cigarette Lighter charger can be used
with 12 Vdc or 24 Vdc. The 3600 series
ACP-12U
phoneisalsocompatiblewiththe ACP-8U
travel charger.
[ 164 ]
Reference information
Car accessories
19
WIRELESS CAR KIT CARK-112
The wireless car kit supports Bluetooth 1.1 specification and offers a
convenient handsfree option in a car, with a remote control button. The
kit includes the Remote Control Button CUW-2, Handsfree Unit HFW-1,
Microphone HFM-8, HF Speaker HFS-12, and power cable PCU-4.
MOBILE HOLDER MBC-16
The MBC-16 Mobile Holder has ergonomic release buttons and a swivel
mount. It supports use with the mobile charger and Plug-in HF Car Kit.
PLUG-IN HF CAR KIT PPH-1
This handsfree car kit includes a built-in speaker. It uses the phone
microphone, but also has a connector for an external microphone, HFM-8.
HEADREST HANDSFREE BHF-2
This headrest installs on a car headrest for handsfree audio. The terminal
charges with the LCH-9 or LCH-12 Cigarette Lighter charger.
MICROPHONE HFM-8
This HFM-8 is a small, directional microphone.
Memory card
The 64 MB memory card provides removable storage
for your phone. The memory card increases available
memory and storage for your multimedia files like video
clips, and sound files, photos, messaging information,
or to backup information from your phone’s memory.
[ 165 ]
• GLOSSARY
19
Business card
A business card is the same as an entry in the phone
book. It may contain a name, phone number, and text
entry. It can also be sent to other devices.
Call forwarding A network services feature you use to forward
incoming calls to another number.
Call lists
A list used to track numbers for incoming, outgoing,
or missed calls.
Call log
A log that registers information about calls you make
and receive.
Call timers
Call waiting
Timers used to track the amount of time you spend
on calls.
A network services feature that enables your phone
to beep while you are in the middle of a call. The beep
lets you know that someone else is calling you.
Electronic serial The identification number that is assigned to the
number (ESN) phone. This number is located under the battery.
In-call options Features available for use while you are in a call.
Keyguard
Keypad tones
Menu
Locks the keypad to prevent accidental key presses.
The tone you hear when you press a key.
A list of choices you can make to change settings on
your phone or use various phone features.
Predictive text A method of entering information in your phone
that uses a dictionary to predict, or guess, what
you are writing.
[ 166 ]
Reference information
19
Profile
A group of settings you can use to customize the way
your phone works.
Quick save
A fast method for saving a number.
Ringing tone
The sound your phone makes when you receive a call.
Ringing tones can be ringing sounds or short tunes.
Scroll bar
A bar that appears on the right side of the screen
when you scroll through the main menus.
SMS
The quick way to say short message service.
Start screen
Voice mail
Your phone’s idle screen.
A network services feature that enables people who call
and miss you to leave a voice message on your phone.
Warning tones Sounds your phone makes during error conditions,
during confirmations, when the battery is low, and
when you need to recharge the battery.
[ 167 ]
• TECHNICAL INFORMATION
19
Feature
Specification
Weight
Size
4.5 oz. (130 g) with 850 mAh Li-lon battery
139 cc
Frequency Range
3650
Lowband 900
880 - 915 MHz (TX)
925 - 960 MHz (RX)
Highband 1900
1850 - 1910 MHz (TX)
1930 - 1990 MHz (RX)
Frequency Range
3600
Lowband 850
824 - 849 MHz (TX)
869 - 894 MHz (RX)
Highband 1900
1850 - 1910 MHz (TX)
1930 - 1990 MHz (RX)
Transmitter Output
Power
Lowband up to 2W
Highband up to 1W
Battery Voltage
3.7 V nominal
Operating Temperature -10°C to + 55°C
(14°F to + 131°F)
Number of Channels
3650
194 lowband
299 highband
Number of Channels
3600
124 lowband
299 highband
[ 168 ]
Reference information
• TROUBLESHOOTING
Memory low
19
When following notes are shown, the phone memory is low and you must
start to delete some data: Not enough memory to perform operation. Delete
some data first. or Memory low. Delete some data.
In the event follow the instructions below:
•
To view what kind of data you have and how much memory the different
data groups consume, go to Menu→ Tools→ App. Manager and select
Options→ Memory details.
•
To avoid memory getting low, you should regularly delete, or transfer
to your memory card:
•
•
•
•
messages from the Inbox, Drafts, and Sent folders in Messaging
retrieved e-mail messages from the phone memory
saved browser pages and
images and photos in Images
•
If you want to delete contact information, calendar notes, call timers,
call cost timers, game scores, or any other data, go to the respective
application to remove the data.
Clearing calendar memory - To remove more than one event at a time,
go to the Month view and select Options→ Delete entry→ and delete either
•
Before date - to delete all calendar notes which take place before a
certain date. Enter the date before which all calendar notes will be
deleted, or
•
All entries - to delete all calendar notes.
Erasing log information - To erase all the log contents, Recent calls log,
and Messaging delivery reports permanently, go to Menu→ Log and
select Options→ Clear log or go to Settings→ Log duration→ No log.
[ 169 ]
Different ways to store data:
19
•
•
•
use PC Suite for Nokia 3650 or PC Suite for Nokia 3600 to take a backup
copy of all data to your computer
send images to your e-mail address and then save the images to your
computer, or
send data via infrared or Bluetooth to another device
• FREQUENTLY ASKED QUESTIONS (FAQ)
Phone display
Q. Why do missing, discolored, or bright dots appear on the screen
every time I turn on my phone?
A. This is an intrinsic characteristic of the active matrix display. Your
phone’s display contains multiple switching elements to control the
pixels. A small number of missing, discolored, or bright dots on the
screen might exist.
Camera
Q. Why does the image appear dark when I am taking a picture with
the Camera or viewing images?
A. The display contrast setting affects the appearance of images. Check
the display contrast setting and adjust it to lighter. Go to Settings→
Phone settings→ Display→ Contrast.
Q. Why do images look smudgy?
A. Check that the camera lens protection window is clean. To clean the
window follow the instructions in “Use proper care and maintenance”
Bluetooth
Q. Why can’t I end a Bluetooth connection?
A. If another device is pairing with your phone but not sending data, and
leaves the connection open, then the only way to disconnect is to
deactivate the Bluetooth link altogether. Go to Bluetooth and select
the setting Bluetooth→ Off.
[ 170 ]
Reference information
Q. Why can’t I find my friend’s Bluetooth enabled device.
19
A. Check that both have activated Bluetooth.
Check that the distance between the two devices is not over 10 meters
or that there are no walls or other obstructions between the devices.
Check that the other device is not in ‘Hidden’ mode.
Multimedia messaging
Q. What should I do when the phone tells that it cannot receive a
multimedia message because memory is full?
A. The amount of memory needed is indicated in the error message: Not
enough memory to retrieve message. Delete some data first. To view what
kind of data you have and how much memory the different data groups
consume, go to Menu→ Tools→ App. Manager and select Options→
Memorydetails. After you have freed up memory, the multimedia message
center tries to send the multimedia messages again automatically.
Q. What should I do when the phone gives the message: Unable to
retrieve multimedia message. Network connection already in use. ?
A. End all active data connections. Multimedia messages cannot be
received if another data connection using a different gateway address
is active for WAP or e-mail.
Q. How can I end the data connection when the phone starts a data
connection again and again? The notes: Retrieving message or Trying
to retrieve message again are shown briefly. What is happening?
A. The phone is trying to retrieve a multimedia message from the
multimedia messaging center.
Check that the settings for multimedia messaging have been defined
correctly and that there are no mistakes in phone numbers or addresses.
Go to Messaging and select Options→ Settings→ Multimedia message.
To stop the phone from making a data connection, you have the
following options. Go to Messaging and select Options→ Settings→
Multimedia message.
[ 171 ]
•
•
Select On receiving msg.→ Defer retrieval if you want the
multimedia messaging center to save the message to be retrieved
later, for example, after you have checked the settings. After this
change, the phone still needs to send information notes to the
network. To retrieve the message later, select Defer retrieval.
19
Select On receiving msg.→ decline message - if you want to decline
all incoming multimedia messages. After this change, the phone
needs to send information notes to the network and the multimedia
messaging center will delete all multimedia messages that are
waiting to be sent to you.
•
Select Multimedia reception→ Off - if you want to ignore all
incoming multimedia messages. After this change the phone will
not make anynetwork connections related to multimediamessaging.
Images
Q. Is the format of the image I am trying to open supported?
Messaging
Q. Why can’t I select a contact?
A. If you cannot select a contact in the Contacts directory, the contact
card does not have a phone number or an e-mail address. Add the
missing information to the contact card in the Contacts application.
Calendar
Q. Why are the week numbers are missing?
A. If you have changed the Calendar settings so that the week will start on
some other day than Monday then the week numbers will not be shown.
Browser services
Q. No valid access point defined. Define one in WAP settings.
A. Insert proper browser settings. Contact your service provider for
instructions.
[ 172 ]
Reference information
Log
19
Q. Why does the log appear empty?
A. You may have activated a filter and no communication events fitting
that filter have been logged. To see all events, select Options→ Filter→
All communication.
PC connectivity
Q. Why do I have problems in connecting the phone to my PC?
A. Make sure that PC Suite for Nokia 3650 or PC Suite for Nokia 3600 is
installed and running on your PC. See the Installation guide for PC Suite
on the CD-ROM in the ‘Install’ section. For further information on how
to use the PC Suite for Nokia 3600 series phones, see the PC suite
online help.
Access codes
Q. What is my password for the lock, PIN, or PUK codes?
A. The default lock code is 12345. If you forget or lose the lock code
contact your phone dealer.
If you forget or lose a PIN or PUK code, or if you have not received such
a code, contact your network service provider.
For information about passwords, contact your access point provider,
for example, a commercial Internet service provider (ISP), WAP service
provider, or network operator.
Application not responding
Q. How do I close an application that is not responding?
A. Open the application switching window by pressing and holding
.
Then scroll to the application, and press to close the application.
[ 173 ]
Nokia One-Year
Limited Warranty
Nokia warrants that the Nokia wireless phone and accessories are free
from defects in material and workmanship. The warranty period for the
Phone (Radio) units and all accessories (excluding carry cases) is twelve
(12) months from the date of purchase OR fourteen (14) months from
date of wholesale shipment from Nokia, OR fifteen (15) months from
the date of manufacture by Nokia. The warranty period for the Carry
cases is three (3) months from the date of purchase or five (5) months
from the date of wholesale shipment from Nokia.
During the warranty period, Nokia will, at its option, repair or replace
the defective product free of charge. Replacement Product may be
either new or remanufactured or refurbished.
However, if Nokia determines that the warranty conditions cannot be
applied, the purchaser will be billed for the repair and shipping.
EXCEPTIONS
This warranty is subject to the following exceptions:
1 Mobile or fixed installation, which is not in accordance with the
installation instructions, published by Nokia, will void the warranty.
Damage caused by a repair or an attempt to repair by other than a
service centre authorized by Nokia will void the warranty;
2 This warranty covers normal consumer use and does not cover defects
or damage to any product which, in the sole opinion of Nokia, has been
subject to: improper storage, exposure to moisture or dampness, exposure
to fire, sand, dirt, windstorm, lightning, or earthquake; to theft, battery
leakage, unauthorized modification, misuse, neglect, abuse, misapplication,
accident, alteration, improper installation, maladjustment of consumer
controls, or abnormal operating conditions, or which has been attributable
to acts of God;
[ 174 ]
Nokia One-Year Limited Warranty
3 Fuses are not covered by the warranty;
4 This warranty does not cover defects or damages caused by a product
which is not approved by Nokia to be connected to its wireless phone;
5 This warranty does not cover defects or damages caused by improper
or defective function of the carrier system or by inadequate signal
reception by the antenna;
6 Removal and reinstallation costs are not covered by this warranty;
7 This warranty is applicable only to products bought through Nokia
Products Ltd. in Ajax, Ontario, Canada, and sold either in Canada or
Bermuda.
8 Removal, alteration, or defacing of the Serial Number Plate, or the
accessory Date Code Labels will void the warranty.
In no event shall Nokia be liable for incidental, special, or consequential
damages, direct or indirect, loss of unanticipated benefits or profits, loss
of use of its wireless telephone, resulting from the use of its wireless
phone, or its accessories, or arising from any breach of this warranty.
CLAIM PROCEDURE
In order to obtain warranty performance, return the defective unit to
the Nokia Service Centre with transportation charges prepaid (Shipping
of the repaired unit may be paid by Nokia, in which case Nokia shall
have risk of loss or damage during this shipment).
The proof of date of purchase will be required before in-warranty service
is rendered.
Maintenance and service may be obtained in any authorized service
centre in Canada.
EXTENSION OF WARRANTY PERIOD
When a repair is made, an extra 90-day service warranty is given to the
labour and parts of the repair concerned. If replacement of a faulty unit
is applied, instead of repairing, this 90-day service warranty is applied
to the replaced unit.
[ 175 ]
Besides this 90-day service warranty, the warranty repairs or replacements
do not affect the original warranty conditions, which are determined by
the date of purchase.
THE FOREGOING WARRANTY IS THE PURCHASER’S SOLE AND EXCLUSIVE
REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR
IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OR
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR USE.
Some provinces do not allow limitations on how long an implied warranty
lasts, so the above limitations may not apply to you.
FOR WARRANTY SERVICE LOCATIONS, CONTACT YOUR SERVICE PROVIDER/
RETAILER/DEALER OR DIRECTLY TO:
NOKIA PRODUCTS LIMITED
601 Westney Road South
Ajax, Ontario L1S 4N7
Tel: 905-427-1373
1-888-226-6542
Website: www.nokia.ca
For products being returned to Nokia or its authorized service centres, the
service provider/retailer/dealershall prepay shipping charges, taxes, duties,
insurance. Nokia shall have no risk for loss or damage during this shipment.
NOTE: As warranty is automatically registered, no further action is
required by the consumer.
[ 176 ]
Bluetooth 134
Index
Numerics
1-touch dialing 52
Making calls 20
Cancelling pairing 138
Connection requests 136
Connection status indicators 137
Device icons 137
Disconnecting 139
Factory set passcode 136
Pairing 136
Pairing requests 136
Passcode, glossary explanation
Receiving data 139
Sending data 136
Settings 135
Short names for paired
devices 138
A
Access codes 40
Access points 33
Settings 36
Settings, Advanced 38
Access points, glossary explanation 33
Service provider, glossary
explanation 33
Accessories
Bookmark, glossary explanation 121
Browser
Settings 46
Animations 60
Answering a call 21
Automatic 46
see Access points
Connecting 120
Emptying memory 125
Ending connections 125
Icons 121
Applications 127
Installing a Java application 128
Java application settings 129
Opening a Java application 129
Uninstalling a Java
application 129
Browsing 122
Buffering
Glossary explanation 66
Business card, glossary explanation 53
Sending 53
Attachments
Retrieving 91
Viewing 91
C
Audio files
Cache, glossary explanation 126
Emptying 125
Calendar 105
Alarm 108
See Media files
Automatic answer 46
B
Battery information 154
[ 177 ]
Calendar entry fields 106
Deleting many entries
simultaneously 169
Sending entries 109
Settings 108
Cell info display 46
Certificates 43
Trust settings 44
Charges
Packet data 35
Stopping alarms 109
Symbols 107
Clearing memory
Calendar entries 169
Log information 169
Clip
Views 107
Call cost limit
Resetting the counter 27
Set by a service provider 26
Call register
See Video recorder
See Log
Call restrictions 45
Calling 19
Computer connections 141
Conference calls 20
Connection indicators
Bluetooth 137
Data connections 12
Infrared 140
Connection settings 33
Contact cards
Calls
1-touch dialing 20
Answering 21
Charging units 26
Conference calls 20
Cost limit 26
Declining 21
Dialed 25
Duration 25
Forwarding 21
International 19
Missed 24
Adding voice tags 50
Assigning 1-touch dialing
numbers 52
Assigning default numbers and
addresses 49
Attaching ringing tones 52
Changing voice tags 52
Deleting voice tags 52
Inserting pictures 49
Listening to voice tags 52
Removing ringing tones 53
Options during a call 22
Received 24
Settings 31
Settings for forwarding 23
Transferring 23
Using the Contacts directory 19
Camera 55
Image types 57
Memory card 58
Memory consumption 58
CD-ROM 141
Cell broadcast messages 93
[ 178 ]
Contact groups 53
Adding many members at the
same time 54
Adding ringing tones 52
Removing members 54
Copying
E
Editing
Calendar entries 105
Contact cards 48
Text 72
E-mail 81
Attachments 91
Deleting 92
Offline 89
Online 88
Contacts between the SIM card
and phone memory 47
Text 75
Opening 90
Remote mailbox 88
Retrieving from mailbox 89
Saving attachments 92
Settings 97
Creating
Contact cards 47
Cutting
Emergency calls 159
Erasing
Text 75
Call cost counters 27
Log 27
Recent calls log 25
D
Data connections
Indicators 12
F
Favorites 103
Date, settings 40
Declining calls 21
Definition of terms 168
Deleting
Adding a shortcut 103
File formats
JAD and JAR 130
RealOne Player 65
SIS file 130
Calendar entries 106
Contact cards 48
Delivery reports 70
Dialed numbers 25
Digital rights management 125
Disconnecting
Supported 91
Fixed dialing 42
Folders, creating, organizing items
to folders 16
Forwarding calls 21
Bluetooth 139
Display settings 31
DNS, Domain Name Service,
glossary explanation 38
DRM 125
G
General settings 29
GIF animations 60
glossary 168
GPRS
DTMF tones, glossary explanation 23
See Packet data
[ 179 ]
H
J
Handsfree
JAD and JAR files 130
Java
See Loudspeaker
Headset 17
See Applications.
JPEG, glossary explanation 55
High speed data, glossary
explanation 34
HSCSD
L
See High speed data
Language
for writing 30
Limit for call costs 26
Lock code 41
Log
Erasing contents 27
Filtering 27
Recent calls 24
Settings 28
Loopset
Activating 46
Loudspeaker
Activating 17
Turning off 17
I
Idle state
See Standby mode
Image modes 57
Images 59
Formats 61
Full screen 60
Keyboard shortcuts when
viewing images 61
Memory consumption 58
Moving the focal point 61
Organizing 61
Picture messages folder 62
Receiving from a digital camera 59
Rotating 61
Viewing image details 61
Zooming 60
M
Mailbox 88
Disconnecting 90
Making calls 19
Media files
Data connections 12
Voice message 33
Info service 93
File formats 65
Glossary explanation 65
Playing 65
Infrared 139
Installing software 131
Internet access points (IAP)
See Access points
Sending 67
Camera 58
IP address, glossary explanation 38
ISDN, glossary explanation 37
ISP
See Internet service provider
[ 180 ]
Memory low
Online 88
Organizing
Menu 14
Troubleshooting 169
Viewing memory
P
Menu 13
Packet data 34
Connection timer 28
Data counter 28
Glossary explanation 34
Pricing 35
Menu key 13
Rearranging the main Menu 14
Messaging
Delivery reports 70
General settings 100
Inbox 83
Settings 39
Pairing, glossary explanation 136
Password
Pasting
Main view 69
Messages on the SIM card 93
Multimedia messages 78
My folders 87
Text 75
Picture messages 77
Saving picture message
graphics 62
Settings 94
PC
Connecting 141
Phonebook
See Contacts
Pictures
Writing e-mail 81
Taking 55
Writing text 72
Viewing 60
Missed calls 24
PIN code 41
Modem
Unblocking 41
Predictive text input 73
Tips 74
Turning off 75
Prepaid SIM cards 26
Prices for packet data 35
Profiles 101
Multimedia messages 78
Playing sounds 85
Re-playing sounds 85
Viewing 84
Music files
See Media files
My folders 87
Renaming 102
Settings 101
N
R
RealOne Player™ 65
Media guide 66
O
Offline 89
[ 181 ]
Streaming 66
Traffic safety 156
Volume control 66
Received calls 24
Vehicles 158
Screen saver
Receiving
Settings 31
Data via Bluetooth 139
Data via infrared 140
Recent calls log 24
Call charging units 26
Call cost limit 26
Search field 16
Security
Access codes 40
Security certificates 43
Settings 40
Sending
Calendar entries 109
Contact cards, Business cards 53
Data via Bluetooth 136
Data via infrared 140
Media files 66
Call costs 26
Call duration 25
Dialed numbers 25
Erasing call lists 25
Missed calls 24
Service command editor 94
Service messages
Service message settings 99
Service messages 87
Settings 29
Received calls 24
Recording video 63
Remote mailbox 88
Disconnecting 90
Removing software 132
Reports 70
Resolution, glossary explanation 58
Retricting calls 45
Access codes 40
Accessories 46
Applications (Java™) 129
Bluetooth 135
Calendar 108
Ringing tones 101
Adding a personal ringing tone 52
Muting 22
Receiving in a smart message 86
Settings 101
Call Forwarding 23
Call restrictions 45
Certificates 43
S
Safety information
Care and maintenance 155
Electronic devices 156
Emergency calls 159
Operating environment 156
Potentially explosive
atmospheres 158
Connection 33
Date and time 40
Device settings 29
Display 31
E-mail 97
Fixed dialing 42
[ 182 ]
General settings for
Messaging 100
Info service 99
Lock code 41
Stopping
Calendar alarm 109
Streaming
Glossary explanation 65
Switching between applications 14
Symbols for
Log 28
Messaging 94
PIN code 41
RealOne Player 67
Security 40
Calendar entries 107
Service messages 99
Sounds 101
T
Taking pictures 55
Text input 72
Text messages 94
Video recorder 64
Text message service center
Adding new 95
Text messages 76
See Text messages
Text templates 87
Thumbnails
Shortcuts
in Favorites 103
in Images 61
SIM card
Copying names and numbers 47
Messages 93
Names and numbers 28
Viewing messages on SIM 28
In a contact card 49
Time, settings 40
To-do 109
SIS file 130
Smart messages
Receiving 85
Tones 101
Ringing tone 102
Touch tones 23
Traditional text input 72
Transferring calls 23
Troubleshooting 169
Sending 77
Software
Installing 131
Removing 132
Transferring a .SIS file to your
phone 131
U
USSD commands 94
Sound files
See Media files
Sounds 101
V
Removing a personal ringing
tone 53
vCard format 53
Video clips
Standby mode 10
See Media files
Video player
See RealOne Player™
Settings 30
[ 183 ]
Video recorder 63
Memory card 64
Saving video clips 63
Sending video clips 64
Settings 64
W
WAP pages
Writing 72
Predictive text input 73
Video clips 64
Predictive text input,
turning off 75
Traditional text input 72
Viewing
GIF animations 60
Images 60
Voice dialing 50
Voice mailbox
X
XHTML pages
Changing the number 20
Forwarding calls to voice
mailbox 23
Voice tags 50
Z
Adding 50
Zooming 60
Changing 52
Deleting 52
Listening 52
Making calls 51
Volume control 17
During a call 19
[ 184 ]
NOTES
[ 185 ]
NOTES
04/03
[ 186 ]
|