Nokia RM 230 User Manual

RM-230  
User Guide  
9255338  
Issue 1 9-Feb-07  
This device complies with Directive 2002/95/EC on the restriction of the use of certain hazardous  
substances in electrical and electronic equipment.  
Export controls  
This device may contain commodities, technology or software subject to export laws and regulations from  
the US and other countries. Diversion contrary to law is prohibited.  
NO WARRANTY  
The third-party applications provided with your device may have been created and may be owned by  
persons or entities not affiliated with or related to Nokia. Nokia does not own the copyrights or  
intellectual property rights to the third-party applications. As such, Nokia does not take any responsibility  
for end-user support, functionality of the applications, or the information in the applications or these  
materials. Nokia does not provide any warranty for the third-party applications.  
BY USING THE APPLICATIONS YOU ACKNOWLEDGE THAT THE APPLICATIONS ARE PROVIDED AS IS  
WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, TO THE MAXIMUM EXTENT PERMITTED BY  
APPLICABLE LAW. YOU FURTHER ACKNOWLEDGE THAT NEITHER NOKIA NOR ITS AFFILIATES MAKE ANY  
REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO  
WARRANTIES OF TITLE, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR THAT THE  
APPLICATIONS WILL NOT INFRINGE ANY THIRD-PARTY PATENTS, COPYRIGHTS, TRADEMARKS, OR OTHER  
RIGHTS.  
Model: 5700  
9255338 Draft  
Contents  
For your safety................................. 6 5. Messaging .................................. 30  
Write and send messages ............................ 31  
General information ........................ 8  
Access codes ...................................................... 8  
Nokia support and contact information .... 9  
Inbox—receive messages.............................. 33  
My folders ........................................................ 34  
Mailbox ............................................................. 34  
Outbox............................................................... 35  
View messages on the SIM card................ 36  
Cell broadcast ................................................. 36  
Service command editor .............................. 36  
Messaging settings........................................ 36  
Message reader............................................... 40  
1. Get started.................................. 10  
Insert a (U)SIM card and battery .............. 10  
MicroSD card slot.......................................... 11  
Charge the battery........................................ 12  
Switch the phone on and off ..................... 13  
Set time and date.......................................... 13  
Normal operating position.......................... 13  
Configuration settings ................................. 13  
6. Contacts ..................................... 40  
Manage contacts............................................ 40  
Manage contact groups ............................... 41  
Add a ringing tone......................................... 41  
Assign speed dialing keys ............................ 41  
2. Your phone................................. 14  
Keys and parts................................................ 14  
Modes................................................................ 15  
Standby mode................................................. 16  
Indicators......................................................... 17  
Menu................................................................. 19  
Welcome application.................................... 19  
7. Gallery ........................................ 42  
Gallery functions............................................ 42  
8. Music player............................... 45  
Tutorial.............................................................. 19 Listen to music................................................ 46  
Help ................................................................... 20 Music menu..................................................... 46  
Volume control............................................... 20 Playlists............................................................. 47  
Keypad lock (keyguard)................................ 20 Music shop....................................................... 47  
Connect a compatible headset.................. 21 Transfer music................................................. 48  
Connect a USB data cable .......................... 21  
9. Media.......................................... 49  
Attach a wrist strap...................................... 21  
Visual Radio..................................................... 49  
3. Call functions............................. 21 Camera.............................................................. 52  
Make a voice call........................................... 21 Movie director................................................. 54  
Answer or reject a call................................. 23 Videos................................................................ 56  
Make a video call........................................... 24 Recorder............................................................ 56  
Answer a video call....................................... 25 RealPlayer......................................................... 56  
Video sharing.................................................. 26 Flash Player...................................................... 57  
Log ..................................................................... 28  
10.Personalization ......................... 58  
Themes .............................................................. 58  
4. Write text ................................... 28  
Traditional text input ................................... 29 Profiles .............................................................. 58  
Predictive text input..................................... 29 3-D tones.......................................................... 59  
Copy and delete text .................................... 30  
4
Connection manager..................................... 86  
Push to talk...................................................... 87  
Remote synchronization .............................. 91  
Infrared ............................................................. 92  
Modem.............................................................. 92  
USB data cable................................................ 93  
Data transfer ................................................... 93  
11.Web............................................ 60  
Mobile Search................................................. 60  
Web.................................................................... 60  
12.Organizer................................... 65  
Clock.................................................................. 65  
Calendar ........................................................... 66  
Notes................................................................. 67  
Calculator......................................................... 68  
Converter.......................................................... 68  
16.Data manager ........................... 94  
Application manager..................................... 94  
File manager.................................................... 96  
Device manager.............................................. 96  
Memory card ................................................... 97  
Activation keys................................................ 98  
13.Applications.............................. 69  
Download!........................................................ 69  
My own............................................................. 69  
14.Settings ..................................... 70  
Voice commands............................................ 70  
Call mailbox .................................................... 71  
Speed dial ........................................................ 71  
Phone settings................................................ 71  
Speech............................................................... 80  
Settings wizard............................................... 80  
Instant messaging......................................... 81  
17.Battery information ................. 99  
Charging and discharging............................ 99  
Nokia battery authentication  
guidelines ...................................................... 100  
18.Enhancements ........................ 101  
Care and maintenance................. 101  
Additional safety information.... 103  
Index............................................. 107  
15.Connectivity.............................. 84  
PC Suite............................................................ 84  
Bluetooth connection................................... 84  
5
For your safety  
Read these simple guidelines. Not following them may be dangerous or illegal. Read the  
complete user guide for further information.  
SWITCH ON SAFELY  
Do not switch the device on when wireless phone use is prohibited or when it  
may cause interference or danger.  
ROAD SAFETY COMES FIRST  
Obey all local laws. Always keep your hands free to operate the vehicle while  
driving. Your first consideration while driving should be road safety.  
INTERFERENCE  
All wireless devices may be susceptible to interference, which could affect  
performance.  
SWITCH OFF IN HOSPITALS  
Follow any restrictions. Switch the device off near medical equipment.  
SWITCH OFF IN AIRCRAFT  
Follow any restrictions. Wireless devices can cause interference in aircraft.  
SWITCH OFF WHEN REFUELING  
Do not use the device at a refueling point. Do not use near fuel or chemicals.  
SWITCH OFF NEAR BLASTING  
Follow any restrictions. Do not use the device where blasting is in progress.  
USE SENSIBLY  
Use only in the normal position as explained in the product documentation. Do  
not touch the antenna unnecessarily.  
QUALIFIED SERVICE  
Only qualified personnel may install or repair this product.  
ENHANCEMENTS AND BATTERIES  
Use only approved enhancements and batteries. Do not connect incompatible  
products.  
WATER-RESISTANCE  
Your device is not water-resistant. Keep it dry.  
BACK-UP COPIES  
Remember to make back-up copies or keep a written record of all important  
information stored in your device.  
6
CONNECTING TO OTHER DEVICES  
When connecting to any other device, read its user guide for detailed safety  
instructions. Do not connect incompatible products.  
EMERGENCY CALLS  
Ensure the phone function of the device is switched on and in service. Press the  
end key as many times as needed to clear the display and return to the standby  
mode. Enter the emergency number, then press the call key. Give your location.  
Do not end the call until given permission to do so.  
About your device  
The wireless device described in this guide is approved for use on the GSM 850, 900, 1800,  
and 1900 and UMTS 2100 networks. Contact your service provider for more information  
about networks.  
When using the features in this device, obey all laws and respect local customs, privacy and  
legitimate rights of others, including copyrights.  
Copyright protections may prevent some images, music (including ringing tones), and other  
content from being copied, modified, transferred, or forwarded.  
Your device supports internet connections and other methods of connectivity. Like  
computers, your device may be exposed to viruses, malicious messages and applications, and  
other harmful content. Exercise caution and open messages, accept connectivity requests,  
download content, and accept installations only from trustworthy sources. To increase the  
security of your device, consider installing antivirus software with a regular update service  
and using a firewall application.  
Warning: To use any features in this device, other than the alarm clock, the device  
must be switched on. Do not switch the device on when wireless device use may  
cause interference or danger.  
Network services  
To use the phone you must have service from a wireless service provider. Many of the  
features require special network features. These features are not available on all networks;  
other networks may require that you make specific arrangements with your service provider  
before you can use the network services. Your service provider can give you instructions and  
explain what charges will apply. Some networks may have limitations that affect how you  
can use network services. For instance, some networks may not support all language-  
dependent characters and services.  
Your service provider may have requested that certain features be disabled or not activated  
in your device. If so, these features will not appear on your device menu. Your device may  
also have a special configuration such as changes in menu names, menu order, and icons.  
Contact your service provider for more information.  
7
This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some  
features of this device, such as web browsing, e-mail, push to talk, instant messaging, and  
multimedia messaging, require network support for these technologies.  
Enhancements, batteries, and chargers  
Check the model number of any charger before use with this device. This device is intended  
for use when supplied with power from the AC-3, AC-4, AC-5, DC-4 chargers or CA-44  
charger adapter.  
Warning: Use only batteries, chargers, and enhancements approved by Nokia for  
use with this particular model. The use of any other types may invalidate any  
approval or warranty, and may be dangerous.  
For availability of approved enhancements, please check with your dealer. When you  
disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.  
General information  
Model: 5700  
Access codes  
Lock code  
The lock code (5 to 10 digits) helps to protect your phone against unauthorized  
use. The preset code is 12345. Change the code, and keep the new code secret and  
in a safe place separate from your phone. To change the code and to set the phone  
to request the code, see “Security,” p. 73.  
If you enter an incorrect lock code five times in succession, the phone ignores  
further entries of the code. Wait for 5 minutes, and enter the code again.  
When the device is locked, calls may be possible to the official emergency number  
programmed into your device.  
PIN codes  
The personal identification number (PIN) code and the universal personal  
identification number (UPIN) code (4 to 8 digits) help to protect your SIM card  
against unauthorized use. See “Security,” p. 73. The PIN code is usually supplied  
with the SIM card.  
The PIN2 code (4 to 8 digits) may be supplied with the SIM card and is required for  
some functions.  
8
The module PIN is required to access the information in the security module. The  
module PIN is supplied with the SIM card if the SIM card has a security module in  
it.  
The signing PIN is required for the digital signature. The signing PIN is supplied  
with the SIM card if the SIM card has a security module in it.  
PUK codes  
The personal unblocking key (PUK) code and the universal personal unblocking key  
(UPUK) code (8 digits) are required to change a blocked PIN code and UPIN code,  
respectively. The PUK2 code is required to change a blocked PIN2 code.  
If the codes are not supplied with the SIM card, contact your local service provider  
for the codes.  
Barring password  
The barring password (4 digits) is required when using Call barring. See “Call  
barring,” p. 77. You can obtain the password from your service provider.  
If you enter an incorrect barring password three times in succession, the password  
is blocked. Contact your service provider.  
Nokia support and contact information  
On the web site, you can get information on the use of Nokia products and  
services. If you need to contact customer service, check the list of local Nokia  
contact centers at www.nokia.com/customerservice.  
For maintenance services, check your nearest Nokia service center at  
www.nokia.com/repair.  
Software updates  
Nokia may produce software updates that may offer new features, enhanced functions, or  
improved performance. You may be able to request these updates through the Nokia  
Software Updater PC application. To update the device software, you need the Nokia  
Software Updater application and a compatible PC with Microsoft Windows 2000 or XP  
operating system, broadband internet access, and a compatible data cable to connect your  
device to the PC.  
To get more information and to download the Nokia Software Updater application, visit  
www.nokia.com/softwareupdate or your local Nokia web site.  
9
1. Get started  
Insert a (U)SIM card and battery  
Always switch the device off and disconnect the charger before removing the battery.  
This phone uses BP-5M batteries.  
For availability and information on using SIM card services, contact your SIM card vendor.  
This may be the service provider or other vendor.  
1. To open the back cover of the phone for the first time, lift it using the plastic  
strip shown on the back of the phone (1). You can then remove the strip.  
To open the back cover later, turn the lower part of the phone 90 degrees left  
or right when the number keys of the lower part are on the same side as the  
display, and lift the back cover (2). To remove the battery, lift it as shown (3).  
2. To release the SIM card holder, slide it backwards (4), and lift it (5).  
Insert the (U)SIM card to the SIM card holder (6). Make sure that the (U)SIM  
card is properly inserted and that the golden-colored contact area on the card  
is facing downwards, and the beveled corner faces upwards.  
10  
Close the SIM card holder (7), and slide it forward to lock it (8).  
3. Replace the battery (9). Replace the back cover (10) and (11).  
MicroSD card slot  
Use only compatible microSD cards approved by Nokia for use with  
this device. Nokia uses approved industry standards for memory  
cards, but some brands may not be fully compatible with this device.  
Incompatible cards may damage the card and the device and corrupt  
data stored on the card.  
Keep microSD cards out of the reach of small children.  
You can extend the available memory with a microSD memory card. You can insert  
or remove a microSD card without switching the phone off.  
Important: Do not remove the memory card in the middle of an operation when  
the card is being accessed. Removing the card in the middle of an operation may  
damage the memory card as well as the device, and data stored on the card may be  
corrupted.  
11  
Insert a microSD card  
Note that the memory card may be  
supplied with the phone, and may  
already be inserted.  
1. Open the side door (1).  
2. Place the microSD card in the slot  
with the golden contact area facing  
down (2). Push the card gently to  
lock it into place.  
3. Close tight the side door (3).  
Remove a microSD card  
1. Open the side door.  
2. Push the card gently to release it. Remove memory card and press 'OK' is  
displayed. Pull the card out, and select OK.  
3. Close tight the side door.  
Charge the battery  
1. Connect the charger to the wall socket.  
2. Open the side door (1), and connect the charger  
plug to the charger connector in the phone (2).  
3. After charging, close tight the side door.  
2
1
If the battery is completely discharged, it may take  
a few minutes before the charging indicator  
appears on the display or before any calls can be made.  
The charging time depends on the charger and the battery used. Charging a  
BP-5M battery with the AC-5 charger takes approximately 80 minutes.  
12  
Switch the phone on and off  
Press and hold the power key.  
If the phone asks for a PIN code, enter the PIN code, and  
select OK.  
If the phone asks for the lock code, enter the lock code, and  
select OK. The factory setting for the lock code is 12345.  
Set time and date  
To set the correct time zone, time, and date, select the  
country you are presently in, then enter the local time and date.  
Normal operating position  
Use the phone only in its normal operating position.  
Note: As with any radio transmitting device, avoid touching  
an antenna unnecessarily when the antenna is in use. For  
example, avoid touching the cellular antenna during a  
phone call. Contact with a transmitting or receiving  
antenna affects the quality of the radio communication,  
may cause the device to operate at a higher power level  
than otherwise needed, and may reduce the battery life.  
Your device has internal antennas.  
Cellular antenna (1)  
Bluetooth antenna (2)  
Configuration settings  
Before you can use multimedia messaging,  
instant messaging, push to talk, e-mail,  
synchronization, streaming, and the browser,  
you must have the proper configuration  
settings on your phone. Your phone may automatically configure browser,  
multimedia messaging, access point, and streaming settings based on the SIM  
card used. You may also receive the settings directly as a configuration message,  
13  
which you save to your phone. For more information on availability, contact your  
service provider or nearest authorized Nokia dealer.  
When you receive a configuration message, and the settings are not automatically  
saved and activated, 1 new message is displayed. Select Show to open the  
message. To save the settings, select Options > Save. You may need to enter a PIN  
code provided by the service provider.  
2. Your phone  
Keys and parts  
Power key (1)  
Loudspeaker (2)  
Earpiece (3)  
Volume keys (4)  
Left and right selection keys (5)  
Menu key (6),  
hereafter described as "select Menu"  
Clear key (7)  
Call key (8)  
End key (9)  
Navi™ scroll key (10),  
hereafter referred to as scroll key  
Number keys (11)  
Microphone (12)  
Nokia AV 2.5-mm connector (13)  
Loudspeaker (14)  
Charger connector (15)  
microSD card slot (16)  
USB connector (17)  
Infrared port (18)  
14  
Media keys:  
Rewind, zoom out (19)  
Play/Pause/Stop, capture key (20)  
Fast forward, zoom in (21)  
Camera lens (22)  
Camera flash (23)  
Modes  
Your phone has five functional modes: phone mode (1), camera mode (2), music  
mode (3), video call mode (4), and video view mode. To switch between the modes,  
turn the lower part of the phone. There is a short pause before a mode is activated.  
In the phone mode, do not try to rotate the lower part of the phone more than 90  
degrees to the left or 180 degrees to the right. If you force the lower part of the  
phone to rotate more, the phone will be damaged.  
Phone mode  
The phone mode is activated when the number keys of the lower part are on the  
same side as the display.  
Camera mode  
To activate the camera mode while in the phone mode, turn the lower part of the  
phone 90 degrees to the left so that the camera lens is pointing away from you  
when you look at the display.  
To take a self portrait, turn the lower part of the phone 90 degrees to the right  
while in the phone mode so that the camera lens is pointing toward you when you  
look at the display.  
15  
Music mode  
To activate the music mode while in the phone mode, turn the lower part of the  
phone 180 degrees to the right so that the keys used to control music playback are  
on the same side as the display.  
Video call mode  
During video calls, you can let the call recipient to see your face. Turn the lower  
part of the phone so that the camera lens is pointing toward you when you look at  
the display. You can also turn the camera lens to the opposite direction.  
Video view mode  
When you are viewing a video or still images in the  
phone mode, you can activate the video view mode.  
Turn the lower part of the phone 90 degrees to the  
left so that the camera lens is pointing away from  
you. In video view mode the display automatically  
changes to landscape, and you can put the phone  
on the table, for example, while viewing.  
To view the next or previous still images or to fast forward or rewind the video,  
press the fast forward or rewind media key.  
To play or pause the video, press the play/pause/stop media key. To stop the video,  
press and hold the play/pause/stop media key.  
Standby mode  
When you have switched on the phone, and it is registered to a network, the  
phone is in the standby mode and ready for use.  
To open the list of last dialed numbers, press the call key.  
To use the voice commands or voice dialing, press and hold the right selection key.  
To change the profile, press the power key, and select a profile.  
To start a connection to the web, press and hold 0.  
Active standby  
When active standby is enabled, you can use the display for fast access to  
frequently used applications. To select whether the active standby is shown, select  
16  
Menu > Settings > Phone sett. > General > Personalisation > Standby mode >  
Active standby > On or Off.  
To access active standby applications, scroll to the application, and select it. In  
active standby the default applications are shown across the top of the active  
standby area, and calendar, to-do, and player events are listed below. To select an  
application or event, scroll to it, and select it.  
Offline profile  
The Offline profile lets you use the phone without connecting it to a network.  
When the Offline profile is active, the connection to the wireless network is  
turned off, as indicated by  
in the signal strength indicator area. All wireless RF  
signals to or from your phone are prevented, and you can use your device without  
a (U)SIM card. Use the offline profile in radio sensitive environments—on board  
aircraft or in hospitals. You can listen to music using the music player when the  
offline profile is active.  
To leave the Offline profile, press the power key, and select another profile.  
Important: In the offline profile you cannot make or receive any calls, or use other  
features that require cellular network coverage. Calls may still be possible to the  
official emergency number programmed into your device. To make calls, you must  
first activate the phone function by changing profiles. If the device has been  
locked, enter the lock code.  
Indicators  
The phone is connected to a UMTS network.  
The phone is connected to a GSM network.  
The phone is in offline mode and not connected to a cellular network. See  
“Offline profile,” p. 17.  
You received one or several messages to the Inbox folder in Messaging.  
You received new e-mail in your remote mailbox.  
There are messages waiting to be sent in Outbox. See “Outbox,” p. 35.  
You have missed calls. See “Recent calls,” p. 28.  
Shown if Ringing type is set to Silent and Message alert tone and E-mail  
alert tone are set to Off. See “Profiles,” p. 58.  
17  
The phone keypad is locked. See “Keypad lock (keyguard),” p. 20.  
The loudspeaker is activated.  
An alarm is active.  
The second phone line is being used. See Line in use in “Call,” p. 76.  
/
All calls to the phone are diverted to your call mailbox or to another  
number. If you have two phone lines, the divert indicator is for the  
first line and for the second.  
A headset is connected to the phone.  
A loopset is connected to the phone.  
The connection to a Bluetooth headset has been lost.  
A data call is active.  
/
A GPRS packet data connection is active. indicates the connection is on  
hold and that a connection is available.  
A packet data connection is active in a part of the network that supports  
EGPRS. indicates the connection is on hold and that a connection is  
available. The icons indicate that EGPRS is available in the network, but  
your device is not necessarily using EGPRS in the data transfer.  
A UMTS packet data connection is active. indicates the connection is  
on hold and that a connection is available.  
Bluetooth is switched on.  
Data is being transmitted using Bluetooth. See “Bluetooth connection,”  
p. 84.  
An infrared connection is active. When infrared is active, but there is no  
connection, the indicator blinks.  
A USB connection is active.  
Other indicators may also be shown. For push to talk indicators, see “Push to talk,”  
p. 87.  
18  
Menu  
In the menu you can access the functions in your phone. To access the main menu,  
press the menu key; hereafter described as "select Menu".  
To open an application or a folder, scroll to it, and press the scroll key.  
To change the menu view, select Menu > Options > Change Menu view and a  
view type.  
If you change the order of the functions in the menu, the order may differ from  
the default order described in this user guide.  
To close an application or a folder, select Back and Exit as many times as needed  
to return to the standby mode, or select Options > Exit.  
To display and switch between open applications, select and hold Menu. The  
application switching window opens, showing a list of open applications. Scroll to  
an application, and select it.  
To mark or unmark an item in applications, press #. To mark or unmark several  
consecutive items, press and hold #, and scroll up or down.  
Leaving applications running in the background increases the demand on battery power and  
reduces the battery life.  
Welcome application  
Welcome application starts when you switch on your phone for the first time.  
With the Welcome application, you can access the following applications:  
Tutorial—Learn about the features of your phone and how to use them.  
Settings wizard—Configure connection settings.  
Data transfer—Copy or synchronize data from other compatible phones.  
To open Welcome later, select Menu > Applications > Welcome.  
Tutorial  
Tutorial contains an introduction to the phone features and a tutorial to teach  
how to use the phone. The tutorial starts automatically when you turn on your  
phone for the first time. To start the tutorial yourself, select Menu > Tutorial and a  
tutorial item.  
19  
Help  
Your device has context-sensitive help. You can access the help from an  
application or from the main menu.  
To access help when an application is open, select Options > Help. To switch  
between help and the application that is open in the background, select and hold  
Menu. Select Options and from the following options:  
Topic list—to view a list of available topics in the appropriate category  
Help category list—to view a list of help categories  
Search by keyword—to search for help topics using keywords  
To open help from the main menu, select Menu > Applications > Help. In the list  
of help categories, select the desired application to view a list of help topics. To  
switch between the help category list, indicated with  
, and a keywords list,  
indicated with  
it.  
, scroll left or right. To display the related help text, select  
Volume control  
To adjust the earpiece or loudspeaker volume during a call or when listening to an  
audio file, press the volume keys.  
To activate the loudspeaker during a call, select Loudspeaker.  
To deactivate the loudspeaker during a call, select Handset.  
Warning: Do not hold the device near your ear when the loudspeaker is in use,  
because the volume may be extremely loud.  
Keypad lock (keyguard)  
To prevent accidental keypresses, you can lock the keypad.  
To lock the keypad in the phone mode, press the left selection key and * within 1.5  
seconds. To set the phone to automatically lock the keypad after a certain time,  
select Menu > Settings > Phone sett. > General > Security > Phone and SIM  
card > Keypad autolock period > User defined and the desired time.  
To lock the keypad in music mode, press the power key quickly, and select Lock  
keypad.  
To unlock the keypad in the phone mode, select Unlock, and press * within 1.5  
seconds.  
To unlock the keypad in music mode, select Unlock > OK.  
20  
When the keypad lock is on, calls may be possible to the official emergency number  
programmed into your device.  
Connect a compatible headset  
Do not connect products that create an  
output signal as this may cause damage  
to the device. Do not connect any voltage  
source to the Nokia AV connector.  
When connecting any external device or  
any headset, other than those approved  
by Nokia for use with this device, to the  
Nokia AV connector, pay special attention to volume levels.  
Connect a USB data cable  
To set the default USB connection mode, select  
Menu > Settings > Connectivity > USB > USB mode  
and the desired mode. To set whether the default  
mode is activated automatically, select Ask on  
connection > No.  
1
2
Attach a wrist strap  
Connect the wrist strap according to the  
graphic.  
3. Call functions  
Make a voice call  
1. In the standby mode, enter the phone number, including the area code. Press  
the clear key to remove a number.  
For international calls, press * twice for the international prefix (the +  
character replaces the international access code), and enter the country code,  
area code (omit the leading zero if necessary), and phone number.  
2. To call the number, press the call key.  
To adjust the volume during the call, press the volume keys.  
21  
3. To end the call, or to cancel the call attempt, press the end key.  
To make a call from Contacts, select Menu > Contacts. Scroll to the desired name;  
or enter the first letters of the name, and scroll to the desired name. To call the  
number, press the call key.  
To call your call mailbox (network service), press and hold 1 in the standby mode.  
You must define the mailbox number before you can call your mailbox. See “Call  
mailbox,” p. 71.  
To call a recently dialed number, press the call key in the standby mode. The list of  
the last 20 numbers you called or attempted to call is shown. Scroll to the number  
you want, and press the call key.  
To make a push to talk call, see “Push to talk,” p. 87.  
Speed dialing  
You can assign a phone number to one of the speed dialing keys 2 to 9. See  
“Assign speed dialing keys,” p. 41, or “Speed dial,” p. 71.  
Call a speed dialing number in either of the following ways:  
• Press the speed dialing key, then the call key.  
• If Speed dialling is set to On, press and hold the speed dialing key until the call  
begins. To set Speed dialling to On, select Menu > Settings > Phone sett. >  
Phone > Call > Speed dialling > On.  
Voice dialing  
A voice tag is added automatically to all entries in Contacts.  
Use long names, and avoid similar names for different numbers.  
Make a voice dialing call  
Voice tags are sensitive to background noise. Use voice tags in a quiet environment.  
Note: Using voice tags may be difficult in a noisy environment or during an  
emergency, so you should not rely solely upon voice dialing in all circumstances.  
1. In the standby mode, press and hold the right selection key. A short tone is  
played, and Speak now is displayed.  
If you are using a compatible headset with the headset key, press and hold the  
headset key.  
22  
2. Speak the voice command clearly. The phone plays the voice command of the  
best match. After 1.5 seconds, the phone dials the number; if the result is not  
the correct one, before dialing select Next and another entry.  
Using voice commands to carry out a phone function is similar to voice dialing.  
See “Voice commands,” p. 70.  
Make a conference call (network service)  
1. Make a call to the first participant.  
2. To make a call to another participant, select Options > New call. The first call  
is automatically put on hold.  
3. To join the first participant in the conference call when the new call is  
answered, select Options > Conference.  
To add a new person to the call, repeat step 2, and select Options >  
Conference > Add to conference. The phone supports conference calls between  
a maximum of six participants, including yourself.  
4. To have a private conversation with one of the participants, select Options >  
Conference > Private. Select a participant and Private. The conference call is  
put on hold on your phone. The other participants can still continue the  
conference call. To return to the conference call, select Options > Add to  
conference.  
5. To drop a participant, select Options > Conference > Drop participant, scroll to  
the participant, and select Drop.  
6. To end the conference call, press the end key.  
Answer or reject a call  
To answer a call, press the call key.  
To adjust the volume during the call, press the volume keys.  
To mute the ringing tone, select Silence.  
Tip: If a compatible headset is connected to the phone, press the  
headset key to answer and end a call.  
To reject the call, press the end key, or select Options > Reject. The caller hears a  
busy tone. If you have activated the Call divert option If busy to divert calls,  
rejecting the call diverts the call.  
23  
To send a text message to the caller informing why you cannot answer the call,  
select Options > Send text message. You can activate the text message reply and  
edit the text in the message. See Reject call with SMS and Message text in “Call,”  
p. 76.  
Call waiting (network service)  
During a call, to answer the waiting call, press the call key. The first call is put on  
hold. To end the active call, press the end key.  
To activate the Call waiting function, select Menu > Settings > Phone sett. >  
Phone > Call > Call waiting > Activate.  
To switch between the two calls, select Swap.  
Options during a call  
Many of the options that you can use during a call are network services. For  
availability, contact your service provider.  
Select Options during a call for some of the following options:  
Transfer—to connect a call on hold to an active call and disconnect yourself  
Replace—to end an active call and replace it by answering the waiting call  
Send DTMF—to send DTMF tone strings (for example, a password). Enter the DTMF  
string or search for it in Contacts. To enter a wait character (w) or a pause  
character (p), press * repeatedly. To send the tone, select OK.  
Tip: You can add DTMF tones to the Phone number or DTMF fields in a  
contact card.  
Make a video call  
When you make a video call, you can see a real-time, two-way video between you  
and the recipient of the call. The live video image or video image captured by the  
camera in your device is shown to the video call recipient.  
To be able to make a video call, you may need to have a USIM card and be in the  
coverage of a UMTS network. For availability of and subscription to video call  
services, contact your service provider. A video call can only be made between two  
parties. The video call can be made to a compatible mobile phone or an ISDN  
client. Video calls cannot be made while there is another voice, video, or data call  
active.  
24  
You are not receiving video (the recipient is not sending video or the network  
is not transmitting it).  
You have denied video sending from your device.  
1. Enter the phone number in the standby mode; or select Menu > Contacts, and  
scroll to the desired contact.  
2. Select Options > Call > Video call.  
Starting a video call may take a while. Waiting for video image is shown. If the  
call is not successful (for example, video calls are not supported by the  
network, or the receiving device is not compatible), you are asked if you want  
to try a normal call or send a message instead.  
The video call is active when you see two video images, and hear the sound  
through the loudspeaker. The call recipient may deny video sending ( ), in  
which case you hear the sound and may see a still image or a grey background  
graphic. During video calls while the phone is in phone mode, turn the lower  
part of the phone so that the camera lens is pointing toward you to let the call  
recipient to see your face, or turn the lower part to opposite direction to show  
the view away from you.  
To increase or decrease the volume during a call, press the volume keys.  
To change between showing video or only hearing sound, select Enable or  
Disable > Sending video, Sending audio, or Sending aud. & video.  
To zoom your own image, select Zoom in or Zoom out. The zoom indicator is  
shown on the top of the display.  
To switch the places of the sent and received video images on the display,  
select Change image order.  
Even if you have denied video sending during a video call, the call will still be  
charged as a video call. Check the pricing with your network operator or  
service provider.  
To end the video call, press the end key.  
Answer a video call  
When a video call arrives,  
is displayed.  
Press the call key to answer the video call. Allow video image to be sent to caller? is  
shown. If you select Yes, the image captured by the camera in your device is  
shown to the caller. If you select No, or do nothing, video sending is not activated,  
and a grey screen is shown in place of the video.  
25  
Even if you have denied video sending during a video call, the call is still charged  
as a video call. Check the pricing with your service provider.  
To end the video call, press the end key.  
Video sharing  
Use Video sharing to send live video from your mobile device to another  
compatible mobile device during a voice call.  
Video sharing requirements  
Because Video sharing requires a 3G universal mobile telecommunications system  
(UMTS) connection, your ability to use Video sharing depends on 3G network  
availability. Contact your service provider for questions about network availability  
and fees associated with this application. To use Video sharing you must do the  
following:  
• Ensure that your device is set up for person-to-person connections.  
• Ensure you have an active UMTS connection and are within UMTS network  
coverage. If you start the sharing session while you are within UMTS network  
coverage and a handover to GSM occurs, the sharing session is discontinued,  
but your voice call continues.  
• Ensure that both the sender and recipient are registered to the UMTS network.  
If you invite someone to a sharing session and that person’s phone is turned  
off, or the person is not within UMTS network coverage, they do not know that  
you are sending an invitation. However, you receive an error message that the  
recipient cannot accept the invitation.  
Settings  
A person-to-person connection is also known as a session initiation protocol (SIP)  
connection. The SIP profile settings must be configured in your device before you  
can use Video sharing.  
Ask your service provider for the SIP profile settings, and save them in your device.  
Your service provider may send you the settings over the air.  
If you know a recipient’s SIP address, you can enter it on your contact card for that  
person. Select Menu > Contacts, a contact, and Options > Edit > Options > Add  
detail > SIP or Share view. Enter the SIP address in the format  
26  
sip:username@domainname (you can use an IP address instead of a domain  
name).  
Share live video  
To receive a sharing session, the recipient must install Video sharing and configure  
the required settings on their mobile device. You and the recipient must both be  
registered to the service before you can start sharing.  
To receive share invitations, you must be registered to the service, have an active  
UMTS connection, and be within the UMTS network coverage.  
1. When a voice call is active, select Options > Share video > Live video.  
2. The phone sends the invitation to the SIP address you have added to the  
contact card of the recipient.  
If the recipient has several SIP addresses in the contact card, select the SIP  
address to which you want to send the invitation, and Select to send the  
invitation.  
If the SIP address of the recipient is not available, enter a SIP address. Select  
OK to send the invitation.  
3. Sharing begins automatically when the recipient accepts the invitation.  
The loudspeaker is active. You can also use a headset to continue your voice  
call while you share live video.  
4. Select Pause to pause the sharing session. Select Continue to resume sharing.  
5. To end the sharing session, select Stop. To end the voice call, press the end key.  
Accept an invitation  
When someone sends you a share invitation, an invitation message is displayed  
showing the sender’s name or SIP address. If your device is not set to Silent, it  
rings when you receive an invitation.  
If someone sends you a share invitation and you are not within UMTS network  
coverage, you will not know that you received an invitation.  
When you receive an invitation, select from the following:  
Accept—to begin the sharing session and activate the view mode.  
Reject—to decline the invitation. The sender receives a message that you rejected  
the invitation. You can also press the end key to decline the sharing session and  
disconnect the voice call.  
27  
To end the sharing session, select Stop.  
Log  
In the log, you can monitor phone calls, text messages, packet data connections,  
and fax and data calls registered by the phone.  
Connections to your remote mailbox, multimedia messaging center, or browser  
pages are shown as data calls or packet data connections in the general  
communications log.  
Note: The actual invoice for calls and services from your service provider may vary,  
depending on network features, rounding off for billing, taxes, and so forth.  
Note: Some timers, including the life timer, may be reset during service or software  
upgrades.  
Recent calls  
The phone registers the phone numbers of missed, received, and dialed calls, and  
the approximate duration of your calls. The phone registers missed and received  
calls only if the network supports these functions, and the phone is switched on  
and within the network service area.  
To view recent calls (network service), select Menu > Log > Recent calls and a call  
type.  
To clear all recent call lists in the Recent calls view, select Options > Clear recent  
calls. To clear only one of the call registers, open the register you want to erase,  
and select Options > Clear list.  
General log  
To view the general log, select Menu > Log, and scroll right.  
To filter the log, select Options > Filter and the filter type.  
To erase all the log contents permanently, select Options > Clear log > Yes.  
4. Write text  
When you write text,  
predictive text input, or  
appears on the top right of the display, indicating  
appears, indicating traditional text input. To set the  
28  
predictive text input on or off when writing text, press *, and select Activate  
predictive text or Predictive text > Off.  
,
, or  
is displayed next to the text input indicator, indicating  
the character case. To change the character case, press #.  
indicates the number mode. To change between letter and number mode,  
press # repeatedly until number mode is active; or press *, and select Number  
mode or Alpha mode.  
Traditional text input  
Press a number key, 1 to 9, repeatedly until the desired character appears. Not all  
characters available under a number key are printed on the key. The availability of  
characters depends on the selected writing language. See Writing language in  
“Language,” p. 72.  
If the next letter you want is on the same key as the present one, wait until the  
cursor appears (or scroll forward to end the time-out period), and enter the letter.  
To insert a number, press and hold the number key.  
The most common punctuation marks and special characters are available under  
the 1 key. For more characters, press and hold *.  
To erase a character, press the clear key. To erase more characters, press and hold  
the clear key.  
To insert a space, press 0. To move the cursor to the next line, press 0 three times.  
Predictive text input  
To enter any letter with a single keypress, use predictive text input. To select the  
predictive text input, press *, and select Activate predictive text. This activates  
predictive text input for all editors in the phone.  
1. To write the desired word, press the keys 29. Press each key only once for one  
letter. The word changes after every keypress.  
For the most common punctuation marks, press 1. For more punctuation marks  
and special characters, press and hold *.  
To erase a character, press the clear key. To erase more characters, press and  
hold the clear key.  
2. When you have finished the word and it is correct, to confirm it, scroll forward  
or insert a space.  
29  
If the word is not correct, to view the matching words the dictionary has found  
one by one, press * repeatedly.  
If the ? character is shown after the word, the word you intended to write is  
not in the dictionary. To add a word to the dictionary, select Spell. Enter the  
word (up to 32 letters) using traditional text input, and select OK. The word is  
added to the dictionary. When the dictionary becomes full, a new word  
replaces the oldest added word.  
Write compound words  
Write the first half of a compound word, and scroll forward to confirm it. Write  
the last part of the compound word, and to complete the compound word, press 0  
to add a space.  
Copy and delete text  
1. To select letters and words, press and hold #, and at the same time scroll left or  
right. As the selection moves, text is highlighted. To select lines of text, press  
and hold #, and at the same time scroll up or down.  
2. To copy the text to the clipboard, press and hold #, and at the same time select  
Copy.  
If you want to delete the selected text from the document, press the clear key.  
3. To insert the text, scroll to the insertion point, press and hold #, and at the  
same time select Paste.  
5. Messaging  
You can create, send, receive, view, edit, and organize text messages, multimedia  
messages, e-mail messages, presentations, and documents. You can also receive  
messages and data using Bluetooth wireless technology, receive and forward  
picture messages, receive service messages and cell broadcast messages, and send  
service commands.  
To open the Messaging menu, select Menu > Messaging. You can see the New  
message function and a list of default folders:  
30  
Inbox—contains received messages except e-mail and cell broadcast  
messages. E-mail messages are saved in the Mailbox folder. To read cell broadcast  
messages, select Options > Cell broadcast.  
My folders—for organizing your messages into folders  
Mailbox—for connecting to your remote mailbox to retrieve your new e-mail  
messages or viewing your previously retrieved e-mail messages offline. After you  
define settings for a new mailbox, the name given to that mailbox is displayed  
instead of Mailbox.  
Drafts—saves draft messages that have not been sent.  
Sent—saves the messages that are sent, excluding messages sent using  
Bluetooth.  
Outbox—temporarily saves the messages waiting to be sent.  
Reports (network service)—saves the delivery reports of the text messages,  
special message types such as business cards, and multimedia messages you have  
sent. Receiving a delivery report of a multimedia message that has been sent to an  
e-mail address may not be possible.  
Write and send messages  
Your device supports the sending of text messages beyond the character limit for a single  
message. Longer messages are sent as a series of two or more messages. Your service  
provider may charge accordingly. Characters that use accents or other marks, and characters  
from some language options, take up more space, limiting the number of characters that can  
be sent in a single message.  
The wireless network may limit the size of MMS messages. If the inserted picture exceeds  
this limit, the device may make it smaller so that it can be sent by MMS.  
Only devices that have compatible features can receive and display multimedia messages.  
The appearance of a message may vary depending on the receiving device.  
Before you can send and receive an SMS message, a multimedia message, or an  
e-mail, or connect to your remote mailbox, you must have the correct connection  
settings in place. See “Messaging settings,” p. 36.  
1. To create a message, select Menu > Messaging > New message and the  
message type.  
To create an Audio message, see “Nokia Xpress audio messaging,” p. 32.  
31  
2. Press the scroll key to select the recipients or groups from Contacts or enter  
the phone number or e-mail address of the recipient in the To field. Separate  
recipients with a semicolon (;).  
3. When creating an e-mail or multimedia message, scroll down to the subject  
field, and write the message subject.  
4. Scroll down to the message field, and write the message.  
When you write text messages, the message length indicator shows how many  
characters you can enter in the message. For example, 10 (2) means that you  
can still add 10 characters for the text to be sent as two separate text  
messages.  
To use a template for the text message, select Options > Insert > Template. To  
create a presentation based on a template to be sent as a multimedia message,  
select Options > Create presentation. To use a text template for the  
multimedia message, select Options > Insert object > Template.  
To add a media object to a multimedia message, select Options > Insert  
object > Image, Sound clip, or Video clip. To create and add a new media  
object, select Options > Insert new > Image, Sound clip, Video clip or Slide.  
When sound is added,  
is shown.  
To add a media object to an e-mail, select Options > Insert > Image, Sound  
clip, Video clip, Note or Template.  
5. To send the message, select Options > Send.  
Nokia Xpress audio messaging  
Audio messages are multimedia messages that consist of a single sound clip. To  
create and send an audio message:  
1. Select Menu > Messaging > New message > Audio message.  
2. In the To field, press the scroll key to choose the recipients from Contacts, or  
enter the phone number or e-mail address. Scroll down to the message field.  
3. To record a new sound clip, press the scroll key, or select Options > Insert  
sound clip > New sound clip. The recording starts.  
To use a previously recorded sound clip, select Options > Insert sound clip >  
From Gallery, scroll to the sound clip, and select it. The sound clip has to be in  
.amr format.  
To play the sound clip on the loudspeaker, select Options > Play sound clip.  
32  
4. To send the message, select Options > Send.  
E-mail settings  
Before you use e-mail, you must do the following:  
• Configure an internet access point (IAP) correctly. See “Connection,” p. 78.  
• Define your e-mail settings correctly. See “E-mail settings,” p. 33.  
Follow the instructions given by your e-mail service provider and internet service  
provider.  
Inbox—receive messages  
Select Menu > Messaging > Inbox.  
When there are unread messages in the inbox, the icon changes to  
.
To open a received message, select Menu > Messaging > Inbox and the desired  
message.  
Important: Exercise caution when opening messages. Multimedia message objects  
may contain malicious software or otherwise be harmful to your device or PC.  
View multimedia objects  
To view the list of media objects that are included in the multimedia message,  
open the message, and select Options > Objects. You can save the file in your  
phone or send it using Bluetooth technology or as a multimedia message to  
another compatible device.  
Special message types  
Your phone can receive many kinds of messages, such as operator logos, business  
cards, calendar entries, and ringing tones.  
To open a received message, select Menu > Messaging > Inbox and the desired  
message. You can save the special message content to your phone. For example, to  
save a received calendar entry to the calendar, select Options > Save to Calendar.  
Note: The picture message function can be used only if it is supported by your  
service provider. Only compatible devices that offer picture message features can  
receive and display picture messages. The appearance of a message may vary  
depending on the receiving device.  
33  
Service messages  
Service messages (network service) are notifications (for example, news  
headlines) that may contain a text message or the address of a browser service.  
For availability and subscription, contact your service provider.  
My folders  
You can organize your messages into folders, create new folders, and rename and  
delete folders.  
Select Menu > Messaging > My folders. To create a folder, select Options > New  
folder, and enter a name for the folder.  
Mailbox  
Select Menu > Messaging > Mailbox.  
When you open Mailbox, Connect to mailbox? is displayed. Select Yes to connect  
to your mailbox (network service) or No to view previously retrieved e-mail  
messages offline.  
To connect to the mailbox afterwards, select Options > Connect.  
When you create a new mailbox, the name you give to the mailbox replaces  
Mailbox. You can have up to six mailboxes.  
When you are online, to end the data connection to the remote mailbox, select  
Options > Disconnect.  
Retrieve e-mail messages from the mailbox  
Important: Exercise caution when opening messages. E-mail messages may  
contain malicious software or otherwise be harmful to your device or PC.  
1. Select Menu > Messaging > Mailbox > Options > Connect.  
2. Select Options > Retrieve e-mail and from the following options:  
New—to retrieve all new e-mail messages to your phone  
Selected—to retrieve only the e-mail messages that have been marked  
All—to retrieve all messages from the mailbox  
3. After you retrieve the e-mail messages, you can continue viewing them online.  
Select Options > Disconnect to close the connection and to view the retrieved  
e-mail messages and headings offline.  
34  
4. To open an e-mail message, select it. If the e-mail message has not been  
retrieved and you are offline and select Open, you are asked if you want to  
retrieve this message from the mailbox.  
To view e-mail attachments, indicated with , select Options > Attachments.  
You can retrieve, open, or save attachments in supported formats.  
Delete e-mail messages  
To delete an e-mail message from the phone and retain it in the remote mailbox,  
select Menu > Messaging > Mailbox > Options > Delete > Phone only. The  
e-mail heading stays in your phone. To remove the heading as well, delete the  
e-mail message from your remote mailbox first, then connect your phone to the  
remote mailbox to update the status.  
To delete an e-mail from the phone and the remote mailbox, select Options >  
Delete > Phone and server.  
To cancel deletion of an e-mail from both the phone and server, scroll to an e-mail  
that has been marked to be deleted during the next connection, and select  
Options > Restore.  
Outbox  
The outbox folder is a temporary storage place for messages that are waiting to be  
sent.  
To access the outbox folder, select Menu > Messaging > Outbox. Message  
statuses:  
Sending—The phone is sending the message.  
Waiting or Queued—The phone is waiting to send messages or e-mail.  
Resend at ... (time)—Sending failed. The phone tries to send the message again  
after a time-out period. To retry sending the message immediately, select  
Options > Send.  
Deferred—To put documents to be on hold while they are in the outbox folder,  
scroll to a message that is being sent, and select Options > Defer sending.  
Failed—The maximum number of sending attempts has been reached.  
35  
View messages on the SIM card  
Before you can view SIM messages, you need to copy them to a folder in your  
phone.  
1. Select Menu > Messaging > Options > SIM messages.  
2. Mark the messages you want to copy.  
3. To copy the marked messages, select Options > Copy, and the folder to which  
you want to copy the messages.  
Cell broadcast  
You may be able to receive messages, such as weather or traffic conditions from  
your service provider (network service). To turn on the service, see Cell broadcast  
in “Cell broadcast settings,” p. 39.  
Select Menu > Messaging > Options > Cell broadcast.  
A packet data connection may prevent cell broadcast reception.  
Service command editor  
To enter and send service commands (also known as USSD commands) such as  
activation commands for network services to your service provider, select Menu >  
Messaging > Options > Service command. To send the command, select  
Options > Send.  
Messaging settings  
Text message settings  
Select Menu > Messaging > Options > Settings > Text message and from the  
following options:  
Message centres—lists all the defined message centers  
Message centre in use —defines which message center is used for delivering text  
messages and special message types such as business cards  
Character encoding > Full support—to select all characters in the message to be  
sent as viewed. If you select Reduced support, characters with accents and other  
marks may be converted to other characters.  
Receive report (network service)—When set to Yes, the status of the sent message  
(Pending, Failed, Delivered) is shown in Reports.  
36  
Message validity—If the recipient of a message cannot be reached within the  
validity period, the message is removed from the message service center. Note  
that the network must support this feature.  
Message sent as—to define how the message is sent. Default is Text.  
Preferred connection—You can send text messages using the normal GSM network  
or, if supported by the network, packet data.  
Reply via same centre (network service)—If you select Yes, and the recipient replies  
to your message, the return message is sent using the same message service  
center number. Some networks do not provide this option.  
Multimedia messaging settings  
Select Menu > Messaging > Options > Settings > Multimedia message and from  
the following options:  
Image size—Define the size of the image in a multimedia message. If you select  
Original, the image is not scaled.  
MMS creation mode—If you select Guided, the phone informs you if you try to  
send a message that may not be supported by the recipient. To set the phone to  
prevent you from sending messages that are not supported, select Restricted. If  
you select Free, message creation is not restricted, but the recipient may not be  
able to view your message.  
Access point in use—Select which access point is used as the preferred connection  
for multimedia messaging.  
Multimedia retrieval—To receive multimedia messages only when you are in your  
home network, select Auto in home netw.. To always receive multimedia messages,  
select Always automatic. To retrieve messages manually, select Manual. To not  
receive any multimedia messages or advertisements, select Off.  
Allow anon. msgs.—To reject messages coming from an anonymous sender, select  
No.  
Receive adverts—Define whether you want to allow reception of multimedia  
message advertisements.  
Receive report—If you want the status of the sent message (Pending, Failed, or  
Delivered) to be shown in Reports, select Yes. Receiving a delivery report of a  
multimedia message that has been sent to an e-mail address may not be possible.  
Deny report sending > Yes—to deny sending delivery reports  
37  
Message validity (network service)—If the recipient of a message cannot be  
reached within the validity period, the message is removed from the multimedia  
message center.  
E-mail settings  
Settings for mailboxes  
Select Menu > Messaging > Options > Settings > E-mail > Mailboxes and a  
mailbox.  
If no mailbox settings have been defined before, you are asked if you want to  
define the settings.  
Connection settings > Incoming e-mail and Outgoing e-mail—To define the  
correct settings, contact your e-mail service provider.  
User settings  
Select User settings and from the following settings:  
My name—Enter the name to be displayed in outgoing e-mail.  
Send message (network service)—To set when your e-mail messages are sent,  
select Immediately or During next conn..  
Send copy to self—Select Yes to send a copy of the e-mail to the address defined in  
My e-mail address.  
Include signature—Select Yes to attach a signature to your e-mail messages and  
to create or edit a signature text.  
New e-mail alerts—To not receive alerts about new e-mail, select Off.  
Retrieval settings  
Select Retrieval settings and from the following settings:  
E-mail to retrieve—To only retrieve headers, select Headers only. To limit how  
much data is retrieved, select Size limit, and enter the maximum amount of data  
per message in kilobytes. To retrieve messages and attachments, select Msgs. &  
attachs.. The Size limit and Msgs. & attachs. options are only available with POP3  
mailboxes.  
Retrieval amount—To limit the number of messages to retrieve from the inbox of  
the remote mailbox, select From Inbox > No. of e-mails and enter the maximum  
number of messages to retrieve. You can also limit the number of messages to  
retrieve from other subscribed folders in From folders (only IMAP4 mailboxes).  
38  
IMAP4 folder path (only IMAP4 mailboxes)—Define the folder path for IMAP4  
mailboxes.  
Folder subscriptions (only IMAP4 mailboxes)—Select the mailbox folders you want  
to subscribe to. To subscribe to or unsubscribe from a folder, scroll to it, and select  
Options > Subscribe or Cancel subscription.  
Automatic retrieval  
Select Automatic retrieval and from the following settings:  
E-mail notifications—To automatically retrieve the headers to your device when  
you receive a notification of new e-mail in your remote mailbox, select  
Auto-update or Only in home netw..  
E-mail retrieval—To have e-mail headers automatically retrieved at set intervals,  
select Enabled, or if you only want headers to be retrieved in your home network,  
select Only in home netw.. Headers can be automatically retrieved for two  
mailboxes at most. You can set on which days, at what times, and how frequently  
the headers are retrieved in Retrieval days, Retrieval hours, and Retrieval interval.  
E-mail notifications and E-mail retrieval cannot be active at the same time.  
Service message settings  
Select Menu > Messaging > Options > Settings > Service message and from the  
following settings:  
Service messages—Allow or deny the reception of service messages.  
Download messages—Download messages automatically or manually.  
Cell broadcast settings  
Check with your service provider whether cell broadcast (network service) is  
available and what the available topics and related topic numbers are.  
Select Menu > Messaging > Options > Settings > Cell broadcast and from the  
following settings:  
Reception—Select On or Off.  
Language—Select in which languages cell broadcast messages are received.  
Topic detection—To automatically save previously unknown topic numbers in  
received cell broadcast messages, select On.  
39  
Other settings  
Select Menu > Messaging > Options > Settings > Other and from the following  
settings:  
Save sent messages—Select to save a copy of every sent text message, multimedia  
message, or e-mail to the Sent folder.  
Number of saved msgs.—Define how many sent messages are saved to the sent  
items folder at a time. When the limit is reached, the oldest message is deleted.  
Memory in use—Select whether to save messages to the phone memory or  
memory card.  
Message reader  
With Msg. reader, you can listen to received text, multimedia, and e-mail  
messages.  
To listen to a message in Inbox or Mailbox, scroll to the message or mark the  
messages, and select Options > Listen. To skip to the next message, scroll down.  
Tip: When 1 new message or New e-mail is displayed in the standby mode,  
to listen to the received messages, press and hold the left selection key  
until Msg. reader starts.  
6. Contacts  
You can save and manage contact information, such as names, phone numbers,  
and addresses.  
Manage contacts  
Select Menu > Contacts.  
To add a new contact, select Options > New contact. Fill in the fields you want,  
and select Done.  
To edit a contact, scroll to it, and select Options > Edit.  
To assign default numbers and addresses to a contact, select it, and select  
Options > Defaults. Scroll to the desired default option, and select Assign.  
40  
To copy names and numbers from a SIM card to your phone, select Options > SIM  
contacts > SIM directory. Scroll to the name you want to copy or mark the desired  
names, and select Options > Copy to Contacts.  
To copy a phone, fax, or pager number from contacts to your SIM card, scroll to  
the contact you want to copy, and select Options > Copy > To SIM directory.  
To view the list of fixed dialing numbers, select Options > SIM contacts > Fixed  
dialling. This setting is only shown if supported by your SIM card.  
Manage contact groups  
Create a contact group so that you can send text or e-mail messages to several  
recipients at the same time.  
1. Select Menu > Contacts.  
2. Scroll to the right, and select Options > New group.  
3. Enter a name for the group, and select the group.  
4. Select Options > Add members.  
5. Mark the contacts you want to add to the group, and select OK.  
Add a ringing tone  
You can set a ringing tone (also a video ringing tone) for each contact and group.  
1. Select Menu > Contacts.  
2. To add a ringing tone to a contact, select the contact, Options > Ringing tone,  
and the desired ringing tone.  
To add a ringing tone to a group, scroll right to the groups list, and scroll to a  
contact group. Select Options > Ringing tone and the ringing tone for the  
group.  
To remove the personal or group ringing tone, select Default tone as a ringing  
tone.  
Assign speed dialing keys  
• Speed dialing is a quick way to call frequently used numbers. You can assign a  
phone number to the speed dialing keys, 2 to 9. The 1 key is reserved for the  
call mailbox. Speed dialing has to be activated before using speed dialing. To  
activate the speed dialing, select Menu > Settings > Phone sett. > Phone >  
Call > Speed dialling > On.  
41  
1. Select Menu > Contacts and a contact.  
2. Scroll to a number, and select Options > Assign speed dial. Scroll to the desired  
speed dialing key, and select Assign. When you return to the contact  
information view,  
next to the number indicates the assigned speed dial.  
To call the contact by speed dialing, in the standby mode, press the speed dialing  
key and the call key, or press and hold the speed dialing key.  
7. Gallery  
Use Gallery to save and organize your images, videos, music tracks, sound clips,  
playlists, streaming links, .ram files, and presentations.  
Select Menu > Gallery. To open a folder (such as Images), select it.  
To open a file, select it. The file opens in its corresponding application.  
The videos you download or transfer to your phone are saved in Videos. To access  
Videos in the standby mode, select Videos, or select Menu > Gallery > Videos, or  
select Menu > Media > Videos.  
You can transfer videos to your phone from a compatible PC, and download video  
clips from compatible internet video services to your phone using packet data.  
Gallery functions  
To set an image as a wallpaper, select Images, and scroll to the image. Select  
Options > Use image > Set as wallpaper. To assign the image to a contact, select  
Assign to contact.  
To set a video as a video ringing tone, select Videos, and scroll to the video. Select  
Options > Use video > Set as ringing tone. To assign the video for a contact, select  
Assign to contact.  
To copy files to phone memory or to the memory card, scroll to the file or mark the  
files, and select Options > Organise > Copy to phone mem. or Copy to memory  
card.  
To create image or video folders and move files to them, select Images or Videos,  
and scroll to a file. Select Options > Organise > New folder and the memory, and  
enter a name for the folder. Mark the files you want to move to the folder, and  
select Options > Organise > Move to folder and the folder.  
42  
View videos and images  
When you are viewing videos or still images in the phone mode, you can activate  
the video view mode. Turn the lower part of the phone 90 degrees to the left so  
that the camera lens is pointing away from you. In video view mode the display  
automatically changes to landscape, and you can put the phone on the table, for  
example, while viewing.  
To view the next or previous still images, press the fast forward or rewind  
media key.  
To fast forward or rewind the video, press the fast forward or rewind media key. To  
play or pause the video, press the play/pause/stop media key. To stop the video,  
press and hold the play/pause/stop media key.  
Edit images  
To edit images in Gallery, scroll to the image, and select Options > Edit.  
To crop an image, select Options > Apply effect > Crop. To crop the image size  
manually, select Manual or a predefined aspect ratio from the list. If you select  
Manual, a cross appears in the upper left corner of the image. Scroll to select the  
area to crop, and select Set. Another cross appears in the lower right corner. Again  
select the area to be cropped. To adjust the first selected area, select Back. The  
selected areas form a rectangle, which forms the cropped image.  
If you selected a predefined aspect ratio, select the upper left corner of the area to  
be cropped. To resize the highlighted area, use the scroll key. To freeze the  
selected area, press the scroll key. To move the area within the picture, use the  
scroll key. To select the area to be cropped, press the scroll key.  
To reduce redness of the eyes in an image, select Options > Apply effect > Red eye  
reduction. Move the cross onto the eye, and press the scroll key. A loop appears on  
the display. To resize the loop to fit the size of the eye, scroll up, down, left, or  
right. To reduce the redness, press the scroll key.  
Shortcuts in the image editor:  
• To view an image in the full screen, press *. To return to the normal view, press *  
again.  
• To rotate an image clockwise or counterclockwise, press 3 or 1.  
• To zoom in or out, press 5 or 0.  
• To move on a zoomed image, scroll up, down, left, or right.  
43  
Edit videos  
To edit videos in Gallery and create custom video clips, scroll to a video clip, and  
select Options > Video editor > Options > Edit video clip.  
In the video editor you can see two timelines: video clip timeline and sound clip  
timeline. The images, text, and transitions added to a video are shown on the  
video clip timeline. To switch between the timelines, scroll up or down.  
Modify video  
To modify the video, select from the following Edit video clip options:  
Cut—Trims the video clip in the cut video clip view.  
Add colour effect—Inserts a color effect on the video clip.  
Use slow motion—Slows the speed of the video clip.  
Mute sound or Unmute sound—Mutes or unmutes the original video clip sound.  
Move—Moves the video clip to the selected location.  
Adjust volume—Adjusts the volume level.  
Remove—Removes the video clip from the video.  
Duplicate—Makes a copy of the selected video clip.  
Edit text (shown only if you added text)—To move, remove, or duplicate text;  
change the color and style of the text; define how long it stays on the screen; and  
add effects to the text.  
Edit image (shown only if you added an image)—To move, remove, or duplicate an  
image; define how long it stays on the screen; and set a background or a color  
effect to the image.  
Edit sound clip (shown only if you have added a sound clip)—To cut or move the  
sound clip, to adjust its length, or to remove or duplicate the clip.  
Edit transition—There are three types of transitions: at the start of a video, at the  
end of a video, and transitions between video clips. You can select start transition  
when the first transition of the video is active.  
Insert—Select Video clip, Image, Text, Sound clip, or New sound clip.  
Movie—Preview the movie in the full screen or as a thumbnail, save or send the  
movie, or cut the movie to a proper size for sending it in a multimedia message.  
To take a snapshot of a video clip, in the cut video view, select Options > Take  
snapshot. In the thumbnail preview view, press the scroll key, and select Take  
snapshot.  
44  
To save your video, select Options > Movie > Save. To define the Memory in use,  
select Options > Settings.  
To send the video, select Send > Via multimedia, Via e-mail, Via Bluetooth, or Via  
infrared. Contact your service provider for details of the maximum multimedia  
message size that you can send. If your video is too large to send in a multimedia  
message,  
appears.  
Transfer videos from PC  
To transfer videos from a compatible PC, use a compatible USB cable or Bluetooth  
connectivity.  
The requirements of the PC for video transfer:  
• Microsoft Windows XP operating system (or later)  
• Nokia PC Suite 6.82 or later  
• Nokia Video Manager application (a add-on application to PC Suite)  
To transfer videos use Nokia Video Manager, connect the compatible USB cable or  
activate Bluetooth connection, and select PC Suite as the connection mode.  
To change the default USB connection mode, select Menu > Settings >  
Connectivity > USB > USB mode.  
Nokia Video Manager is optimized for transcoding and transfering video files. For  
information about transfering video with Nokia Video Manager, see the Nokia  
Video Manager help.  
Download files  
Select Menu > Gallery, the folder for the file type you want to download, and the  
download function (for example, Images > Downl. graphics). The browser opens.  
Choose a bookmark for the site to download from.  
8. Music player  
Warning: Listen to music at a moderate level. Continuous exposure to high volume  
may damage your hearing. Do not hold the device near your ear when the  
loudspeaker is in use, because the volume may be extremely loud.  
To activate music mode and start Music player, turn the lower part of the phone to  
the right so that the playback control keys are on the same side as the display.  
45  
You can listen to music also when the Offline profile is activated. See “Offline  
profile,” p. 17.  
To add songs to your device, see “Transfer music,” p. 48.  
For more information about copyright protection, see “Activation keys,” p. 98.  
Listen to music  
1. Activate the music mode.  
2. In Music menu, select the category, such as All songs or Albums.  
3. Select the music you want to play.  
Use the media keys to control playback.  
• Press the play/pause/stop key to play or pause a song. Press and hold the key to  
stop the playback.  
• Press the rewind key to rewind the song or to skip backwards.  
• Press the fast forward key to fast forward the song or to skip forward.  
You can also use the scroll key to control the player.  
To adjust the volume, use the volume key.  
To switch random play ( ) on or off, select Options > Shuffle.  
To repeat the current song ( ), all songs ( ), or to switch repeat off, select  
Options > Repeat.  
To modify the tone of the music playback, select Options > Equaliser.  
To modify the balance loudness or stereo widening, select Options > Audio  
settings.  
To view a visualization during playback, select Options > Start visualisation.  
To return to the standby mode and leave the player in the background, press the  
end key. If Active standby is On, the currently playing song is displayed in the  
standby mode. To access the music player from the standby mode, select the  
currently playing song. To switch to another open application, press and hold  
Menu.  
Music menu  
To select more music to play in Now playing view, select Options > Go to Music  
menu. To return to the Now playing view, select Options > Go to Now playing.  
46  
The music menu shows the music available in the phone and compatible memory  
card (if inserted). All songs lists all music. To view sorted songs, select Albums,  
Artists, Genres, or Composers. To view playlists, select Playlists.  
To refresh the library after you have updated the song selection in your phone,  
select Options > Refresh Music library.  
Playlists  
To view and manage playlists, in the music menu, select Playlists. The following  
playlists appear automatically: Most played tracks, Recently played songs, and  
Recent additions.  
To view details of the playlist, select Options > Playlist details.  
Create a playlist  
1. Select Options > Create playlist.  
2. Enter a name for the playlist, and select OK.  
3. Select artists to find the songs you want to include in the playlist. Press the  
scroll key to add items. To show the song list under an artist title, scroll right.  
To hide the song list, scroll left.  
4. When you have made your selections, select Done. If a compatible memory  
card is inserted, the playlist is saved to the memory card.  
To add more songs later, when viewing the playlist, select Options > Add songs.  
To add songs, albums, artists, genres, and composers to a playlist from the  
different views of the music menu, select an item and Options > Add to a  
playlist > Saved playlist or New playlist.  
To remove a song from a playlist, select Options > Remove from playlist. This  
deletion does not delete the song from the phone ; it only removes it from the  
playlist.  
To reorder songs in a playlist, scroll to the song you want to move, and select  
Options > Reorder list > Grab, scroll to a new position, and select Drop.  
Music shop  
In the music shop (network service) you can search, browse, and purchase music  
for downloading to your phone. The variety and appearance of music shop services  
may vary. For more information and availability of music shop, contact your  
service proder.  
47  
You must have music shop settings and valid internet connections in order to use  
this service. For more details, see “Music shop settings,” p. 48, and “Access points,”  
p. 78.  
To go to music shop, in the Music player, select Options > Go to Music shop  
Music shop settings  
The availability and appearance of the music shop settings may vary. The settings  
may also be predefined, and you cannot edit them.  
In the music shop, you may be able to edit the settings by selecting Options >  
Settings.  
If the settings are not predefined, you may be asked to enter the following  
settings:  
Address—You must define the web address of the music shop service.  
Default acc. pt.—Select the access point to use when connecting to the music  
shop.  
User name—Enter your user name for the music shop.  
Password—Enter your password for the music shop.  
If User name and Password fields are left empty, you may have to enter them at  
login.  
Transfer music  
You can buy music protected with WMDRM from online music shops, and transfer  
the music to your phone.  
To transfer music from a compatible PC or other compatible devices, use a  
compatible USB cable or Bluetooth connectivity. You can also IR connection. For  
details, see “Bluetooth connection,”, p. 84, or “Infrared,” p. 92. You cannot  
transfer WMDRM protected music files using Bluetooth or IR connection.  
To refresh the library after you have updated the song selection in your phone, in  
the Music menu, select Options > Refresh Music library  
The requirements of the PC for music purchase and transfer:  
• Microsoft Windows XP operating system (or later)  
• Compatible version of Windows Media Player application  
• Nokia PC Suite 6.82 or later  
48  
Transfer music from PC  
You can use three different methods to transfer music:  
• To view your phone on a PC as an external hard drive where you can transfer  
any data files, make the connection with a compatible USB cable or Bluetooth  
connectivity.  
If you are using the USB cable, select Data transfer as the connection mode. A  
compatible memory card needs to be inserted in the phone. You cannot  
transfer WMDRM protected music files using Data transfer.  
• To synchronize music with Windows Media Player, connect the compatible  
USB cable and select Media player as the connection mode. A compatible  
memory card needs to be inserted in the phone.  
To use Nokia Music Manager in Nokia PC Suite, connect the compatible USB  
cable or activate Bluetooth connection, and select PC Suite as the connection  
mode. You cannot transfer WMDRM protected music files using PC Suite.  
To change the default USB connection mode, select Menu > Settings >  
Connectivity > USB > USB mode.  
Both Windows Media Player and Nokia Music Manager in Nokia PC Suite have  
been optimized for transferring music files. For information about transferring  
music with Nokia Music Manager, see the Nokia PC Suite user guide.  
Music transfer with Windows Media Player  
The functionality of the music synchronization may vary between different  
versions of the Windows Media Player application. For more information, see the  
corresponding Windows Media Player guides and helps.  
9. Media  
Visual Radio  
You can use the Visual Radio application as an FM radio with automatic tuning  
and preset stations or with parallel visual information related to the radio  
program if you tune in to stations that offer Visual Radio service. The Visual Radio  
service uses packet data (network service).  
To use the Visual Radio service, the following requirements must be met:  
49  
• The radio station and your service provider must support this service.  
• Your internet access point must be defined for access to the network  
operator’s Visual Radio server.  
• The radio station must have the correct Visual Radio service ID defined and  
have Visual Radio service enabled.  
Visual Radio cannot be started when the phone is in the offline mode.  
The FM radio depends on an antenna other than the wireless device antenna. A compatible  
headset or enhancement needs to be attached to the device for the FM radio to function  
properly.  
Warning: Listen to music at a moderate level. Continuous exposure to high volume  
may damage your hearing. Do not hold the device near your ear when the  
loudspeaker is in use, because the volume may be extremely loud.  
You can make a call or answer an incoming call while listening to the radio. The  
radio is turned off when there is an active call.  
To open Visual Radio, select Menu > Media > Radio.  
To turn the radio off, select Exit.  
Tune and save a radio station  
To start the station search when the radio is on, select  
or  
. Searching stops  
when a station is found. To save the station, select Options > Save station. Select  
a location for the station. Enter the name of the station, and select OK.  
Radio functions  
To adjust the volume, press the volume keys.  
Select  
or  
to scroll to the next or previous saved station. The buttons are  
inactive if there are no saved stations.  
When using a compatible headset, press the headset key to scroll to the next  
saved radio station.  
To save the current station, select Options > Save station, a preset position, and  
enter the station name.  
To set the station frequency manually, select Options > Manual tuning.  
To listen to the radio in the background and go to the standby mode, select  
Options > Play in background.  
50  
Station list  
When the radio is on, select Options > Stations. The station list is used for  
managing the saved radio stations.  
Station setup  
Scroll to a station in the station list, press the scroll key, and select Edit to change  
the station parameters.  
View visual content  
To check availability and costs, and to subscribe to the service, contact your  
service provider.  
To view visual content of the current station, select  
.
If the visual service ID was not saved in the station list, you are asked for the visual  
service ID. Enter the visual service ID, and select OK. If you do not have the visual  
service ID, select Retrieve to access the station directory (network service).  
To end the visual content feed but not the FM radio, select Close.  
To set light settings and the power saver time-out, select Options > Display  
settings.  
Visual Radio settings  
When the radio is on, select Options > Settings and the following:  
Start-up tone—to enable or disable the start-up tone  
Auto-start service—to enable or disable the automatic display of visual content  
Access point—to select the access point  
Station directory  
With the station directory (network service) you can select Visual Radio enabled  
or traditional radio stations from a list, grouped in folders.  
To check availability and costs, and to subscribe to the service, contact your  
service provider.  
Access from the visual content view  
To retrieve the visual service ID and to start visual content for the currently tuned  
radio station, select  
and Retrieve. After the connection to the station  
51  
directory is established, select the nearest location to your current position from a  
list of folders, and press the scroll key.  
The device compares the frequencies of the listed radio stations with the currently  
tuned in frequency. If a matching frequency is found, the visual service ID of the  
tuned radio station is displayed. Select OK to start viewing the visual content.  
If there is more than one radio station with matching frequencies, the radio  
stations and their visual service ID are displayed in a list.  
Select the desired radio station. The tuned radio station and the visual service ID  
are displayed. Select OK to start viewing the visual content.  
Access from options  
To access the station directory (network service) from the station list, select  
Options > Station directory.  
After the connection to the station directory, select the nearest location to your  
current position from a list of locations.  
Radio stations that provide visual content are indicated with  
Select the desired radio station and from the following options:  
.
Listen—to tune to the highlighted radio station. To confirm the frequency setting,  
select Yes.  
Start visual service—to open the visual content of the selected radio station (if  
available)  
Save—to save the details of the selected radio station to the station list  
Details—to view channel information  
Camera  
To activate the camera mode while in the phone mode, turn the lower part of the  
phone 90 degrees to the left so that the camera lens is pointing away from you  
when you look at the display. To take a self portrait, turn the lower part of the  
phone 90 degrees to the right so that the camera lens is pointing toward you  
when you look at the display.  
still image mode.  
on the upper left of the display indicates the  
To capture an image, press the capture key. You can also capture an image by  
pressing the scroll key. The image is saved to Images in Gallery, and the image is  
displayed. To return to the viewfinder, select Back. To delete the image, press the  
clear key.  
52  
To zoom in or out, press the fast forward or rewind media key.  
To capture images sequentially, select Options > Sequence mode > On, or press 4.  
When you press the scroll key, the camera captures six images in short intervals  
and displays the images in a grid.  
To turn the flash on, select Options > Flash > On. If you select Automatic, flash is  
used automatically when necessary.  
Keep a safe distance when using the flash. Do not use the flash on people or animals at close  
range. Do not cover the flash while taking a picture.  
In dim lighting, to use night mode, select Options > Night mode > On, or press 1.  
To use the self-timer, select Options > Self-timer and the time you want the  
camera to wait before capturing the image. Press the scroll key, and the timer  
starts.  
To adjust the white balance or color tone, select Options > Adjust > White  
balance or Colour tone.  
To record a video, select Options > Video mode, or scroll right.  
on the upper  
left of the display indicates the video mode. To start the recording, press the  
capture key or the scroll key. To pause the recording, press the capture key. To  
stop the recording, press and hold the capture key.  
To use the panorama mode, select Options > Panorama mode, or scroll right.  
on the upper left of the display indicates the panorama mode. Press the  
capture key to start capturing a panorama image. The panorama preview is shown  
on the display. Turn slowly to the right or left. You cannot change the direction.  
You turn too fast if the arrow on the display is red. To stop the panorama, press the  
capture key again.  
Camera settings  
Your device supports an image capture resolution of 1600 x 1200 pixels.  
You can change camera settings for still images. In the camera mode, select  
Options > Settings > Image and from the following settings:  
Image quality and Image resolution—The better the image quality and the higher  
the resolution, the more memory the image consumes.  
Show captured image—To not display the image after capturing, select No.  
Default image name—Change how the captured images are named.  
Memory in use—Select whether you want to save your images in the phone  
memory or on the memory card.  
53  
You can change camera settings for videos. In the camera mode, select Options >  
Settings > Video and from the following settings:  
Length—If set to Maximum, the length of the recorded video is only restricted by  
the available memory. If set to Short, the recording time is optimized for MMS  
sending.  
Video resolution—Select between two video resolutions.  
Default video name—Select how the video clips are named.  
Memory in use—Select whether you want to save your video clips in the phone  
memory or on the memory card.  
Movie director  
A muvee is a short, edited video clip that can contain video, images, music, and  
text. Quick muvee is created automatically by Movie director after you select the  
style for the muvee. Movie director uses the default music and text associated  
with the chosen style. In a custom muvee you can select your own video and  
music clips, images and style, and add an opening and closing message. You can  
send muvees with MMS.  
A muvee can be saved in Gallery in .3gp file format.  
To create muvees, select Menu > Media > Movie. Mark images and videos, and  
select Options > Create muvee.  
Create a quick muvee  
1. To create a quick muvee, select Menu > Media > Movie. Select the videos for  
the muvee, and scroll right to select the images, and select Options > Create  
muvee.  
2. Select a style for the muvee from the style list.  
Create a custom muvee  
1. To create a a custom muvee, select Menu > Media > Movie. Select the videos  
for the muvee, and scroll right to select the images, and select Options >  
Create muvee. The style selection view opens.  
2. Scroll to the desired style, and select Options > Customise.  
3. In Videos & images, reorder and edit the selected items, or add or remove items  
from your muvee. You can define the order in which the files are played in the  
54  
muvee. Select the file you want to move. Scroll to the file below which you  
want to place the marked file, and press the scroll key. To add or remove  
images and videos from the muvee, select Options > Add/Remove.  
In Music, select the music for the muvee.  
To add albums and their content to the muvee, in the image or video clip list  
view, select Options > Albums.  
In Message you can add an opening and closing text to a muvee.  
In Length, you can define the length of the muvee. Select from the following:  
Multimedia message—to optimize the length of the muvee for MMS sending  
Auto-select—to include all the selected images and video clips in the muvee  
Same as music—to set the muvee duration to be the same as the chosen music  
clip  
User defined—to define the length of the muvee  
4. Select Options > Create muvee. The preview view opens.  
5. To preview the custom muvee before saving it, select Options > Play.  
6. To save the muvee, select Options > Save.  
To create a new custom muvee by using the same style settings, select Options >  
Recreate.  
Select content  
To edit the selected video clips, in the Videos & images folder, select Options >  
Select contents. You can select which parts of the video clip you want to include  
or exclude in the muvee. In the slide, green indicates included, red indicates  
excluded, and grey indicates neutral parts.  
To include a part of the video clip in the muvee, scroll to the part, and select  
Options > Include. To exclude a part, select Options > Exclude. To exclude a shot,  
select Options > Exclude shot.  
To let Movie director randomly include or exclude a certain part of the video clip,  
scroll to the part, and select Options > Mark as neutral. To randomly include or  
exclude parts of the clip, select Options > Mark all as neutral.  
Settings  
In the style selection view, select Options > Customise > Settings to edit the  
following options:  
Memory in use—Select where to save your muvees.  
55  
Resolution—Select the resolution of your muvees. Select Automatic to use the  
optimal resolution based on the number and length of the video clips you have  
selected.  
Default muvee name—Set a default name for the muvees.  
Videos  
To access the videos folder in Gallery, select Menu > Media > Videos.  
Recorder  
The voice recorder allows you to record phone conversations and voice memos. If  
you record a phone conversation, all parties hear a beeping sound during  
recording.  
Recorded files are stored in Gallery. See “Gallery,” p. 42.  
Select Menu > Media > Recorder. To record a sound clip, select Options > Record  
sound clip, or select . To listen to the recording, select  
.
RealPlayer  
With RealPlayer, you can play media files such as video clips saved in the phone  
memory or memory card, or stream media files over the air by opening a streaming  
link. RealPlayer does not support all file formats or all the variations of file  
formats.  
To open RealPlayer, select Menu > Media > RealPlayer. To play a media file, select  
Options > Open > Most recent clips or Saved clip.  
To stream content over the air:  
• Select a streaming link saved in the gallery.  
• Open a streaming link while browsing the web.  
To stream live content, you must first configure your default access point. See  
“Access points,” p. 78. Contact your service provider for more information.  
In RealPlayer, you can only open an rtsp:// URL address. You cannot open an http:/  
/ URL address; however, RealPlayer recognizes an http link to a .ram file since a  
.ram file is a text file containing an rtsp link.  
Warning: Do not hold the device near your ear when the loudspeaker is in use,  
because the volume may be extremely loud.  
56  
With RealPlayer, you can play media files such as video clips saved in the phone  
memory or memory card, or stream media files over the air by opening a streaming  
link. To open RealPlayer, select Menu > Media > RealPlayer.  
RealPlayer does not support all file formats or all the variations of file formats.  
Play media files  
To play a media file in RealPlayer, select Options > Open and from the following:  
Most recent clips—to play media files that you have recently played  
Saved clip—to play media files saved in the phone or memory card  
To stream content over the air:  
• Select a streaming link saved in the gallery. A connection to the streaming  
server is established.  
• Open a streaming link while browsing the web.  
To stream live content, you must first configure your default access point. See  
“Access points,” p. 78.  
Many service providers require you to use an internet access point (IAP) for your  
default access point. Other service providers allow you to use a WAP access point.  
Contact your service provider for more information.  
In RealPlayer, you can only open an rtsp:// URL address. You cannot open an http:/  
/ URL address; however, RealPlayer recognizes an http link to a .ram file since a  
.ram file is a text file containing an rtsp link.  
Warning: Do not hold the device near your ear when the loudspeaker is in use,  
because the volume may be extremely loud.  
Shortcuts during play  
Scroll up to seek forward or down to seek back in the media file.  
Press the volume keys to increase or decrease the sound volume.  
Flash Player  
With Flash Player, you can view, play, and interact with flash files made for mobile  
devices.  
Select Menu > Media > Flash Player.  
To open a folder or play a flash file, select it.  
57  
10. Personalization  
Themes  
To change the look of your phone display, activate a theme. A theme can include  
the standby mode wallpaper and power saver. You can edit a theme to personalize  
your phone further.  
Select Menu > Personalis. > Themes. To see a list of the available themes, select  
General. The active theme is indicated by a check mark.  
To preview a theme, scroll to the theme, and select Options > Preview. To activate  
the previewed theme, select Set.  
In Themes, you can also set the menu view type, set a custom wallpaper, and  
personalize the look of the power saver.  
Audio theme  
To apply or edit an audio theme, select Menu > Personalis. > Themes > Audio  
themes.  
To apply an audio theme, select Active audio theme and the desired theme.  
You can personalize the sounds associated with an event or function.  
To save the personalized theme, in the Audio themes main view, select Options >  
Save theme and enter a name for the theme.  
Profiles  
In Profiles, you can adjust and personalize the phone tones for different events,  
environments, or caller groups. You can see the currently selected profile at the  
top of the display in the standby mode. If the General profile is in use, only the  
current date is shown.  
Select Menu > Personalis. > Profiles.  
To activate the profile, select the profile and Activate.  
Tip: To quickly change to Silent profile from any other profile, in the  
standby mode, press and hold #.  
To personalize a profile, select the profile, Personalise and from the following  
options:  
58  
Ringing tone—To set the ringing tone for voice calls, choose a ringing tone from  
the list. Press any key to stop the sound. You can also change ringing tones in  
contacts. See “Add a ringing tone,” p. 41.  
Video call tone—Select the ringing tone for video calls.  
Say caller's name—Select On to have the phone say the caller’s name when the  
phone is ringing.  
Ringing type—When Ascending is selected, the ringing volume starts from level  
one and increases level by level to the set volume level.  
Ringing volume—Set the volume level for the ringing and message alert tones.  
Message alert tone—Set the alert tone for text and multimedia messages.  
E-mail alert tone—Set the alert tone for e-mail messages.  
Vibrating alert—Set the phone to vibrate to alert for incoming calls and messages.  
Keypad tones—Set the volume level for keypad tones.  
Warning tones—Activate or deactivate warning tones.  
Alert for—Set the phone to ring only upon calls from phone numbers that belong  
to a selected contact group. Phone calls coming from people outside the selected  
group have a silent alert.  
Profile name—Name the profile. This setting is not shown for the General and  
Offline profiles.  
When using the Offline profile, the phone is not connected to the GSM network. If  
no SIM card is installed, to use some functions of the phone, start the phone in  
Offline.  
Important: In the offline profile you cannot make or receive any calls, or use other  
features that require cellular network coverage. Calls may still be possible to the  
official emergency number programmed into your device. To make calls, you must  
first activate the phone function by changing profiles. If the device has been  
locked, enter the lock code.  
3-D tones  
With 3-D tones you can apply three-dimensional sound effects to ringing tones.  
Not all ringing tones support 3-D effects. To edit 3-D tone settings, select Menu >  
Personalis. > 3-D tones.  
To enable the 3-D effects, select 3-D tones > On. To change the ringing tone,  
select Ringing tone and the desired ringing tone.  
59  
To change the 3-D effect that is applied to the ringing tone, select Sound  
trajectory and the desired effect. To modify the effect, select Trajectory speed,  
Doppler effect, or Reverberation. Doppler effect may not be available for all  
effects.  
To listen to the ringing tone with the 3-D effect, select Options > Play tone.  
If you enable the 3-D tones but do not select any 3-D effect, stereo widening is  
applied to the ringing tone.  
11. Web  
Mobile Search  
Use Mobile Search to get access to search engines, and find and connect to local  
services, websites, images, and mobile content. You can use the application to  
find and call local restaurants and shops, and use the advanced mapping  
technology to assist you in finding their location.  
Select Menu > Web > Search.  
When you open Mobile Search, a list of categories is displayed. Select a category  
(for example, images), and enter your text into the search field. Select Search. The  
search results are displayed on the screen.  
For additional help and instructions on the application, select Options > Help.  
For more information on the application, visit also www.mobilesearch.nokia.com/.  
Web  
To browse web pages written in XHTML, WML, or HTML, select Menu > Web >  
Browser, or press and hold 0 in the standby mode.  
Check the availability of services, pricing, and tariffs with your service provider.  
Service providers also give you instructions on how to use their services.  
Set up the phone for the browser service  
Your device may configure the WAP or internet access point automatically based  
on your SIM card.  
You can use Settings wizard to configure WAP or internet access point settings.  
See “Settings wizard,” p. 80.  
60  
You may receive service settings in a configuration message from the service  
provider.  
To define an access point manually, see Access points in “Connection,” p. 78.  
Make a connection  
To access web pages, do the following:  
• Select the home page ( ) of your service provider.  
• Select a bookmark from the bookmarks view.  
• In the bookmarks view, enter the address of the web page, and select Go to.  
Bookmarks  
Your device may have preinstalled bookmarks and links for third-party internet sites. You  
may also access other third-party sites through your device. Third-party sites are not  
affiliated with Nokia, and Nokia does not endorse or assume liability for them. If you choose  
to access such sites, you should take precautions for security or content.  
Bookmarks are indicated by the following icons:  
The starting page defined for the default access point.  
The automatic bookmarks folder contains bookmarks ( ) that are collected  
automatically when you browse pages.  
Any bookmark showing the title or internet address of the bookmark.  
and  
may be replaced with the website’s icon.  
Add bookmarks manually  
1. In the bookmarks view, select Options > Bookmark manager > Add bookmark.  
2. Fill in the fields.  
3. Select Options > Save.  
Send bookmarks  
Scroll to a bookmark or mark several bookmarks, select Options > Tools > Send  
and an option.  
Connection security  
If the security indicator is displayed during a connection, the data transmission  
between the device and the internet gateway or server is encrypted.  
61  
The security icon does not indicate that the data transmission between the gateway and the  
content server (or place where the requested resource is stored) is secure. The service  
provider secures the data transmission between the gateway and the content server.  
To view details about the connection, encryption status, and information about  
server authentication, select Options > Tools > Page info.  
Security features may be required for some services, such as banking services. For  
such connections you need security certificates. For more information, contact  
your service provider. See also “Certificate management,” p. 74.  
Browse web pages  
Keys and commands for browsing  
To open a link, make selections, or check boxes, press the scroll key.  
To go to the previous page while browsing, select Back. If Back is not available,  
select Options > Navigation options > History to view a chronological list of the  
pages visited during a browsing session. To choose the desired page, scroll left or  
right, and select it. The history list is cleared each time a session is closed.  
To save a bookmark while browsing, select Options > Save as bookmark.  
To retrieve the latest content from the server, select Options > Navigation  
options > Reload.  
To open the browser toolbar, scroll to an empty part of the page, and press the  
scroll key.  
Keypad shortcuts while browsing  
1—Open your bookmarks.  
2—Search for keywords in the current page.  
3—Return to the previous page.  
5—List all open windows.  
8—Show the page overview of the current page. Press 8 again to zoom in and view  
the desired section of the page.  
9—Enter a new web address.  
0—Go to the start page.  
* or #—Zoom the page in or out.  
62  
Mini map  
Mini map helps you navigate web pages that contain large amount of  
information. Set Mini map on in browser settings. See “Browser settings,” p. 64.  
Scroll through a large web page, and Mini map opens and displays an overview of  
the web page you are browsing. To move in Mini map, scroll. When you stop  
scrolling, Mini map disappears and the area outlined in Mini map is displayed.  
Page overview  
With Page overview, you can move more quickly to the desired part of a web page.  
Page overview may not be available on all pages.  
To show the page overview of the current page, press 8. To find the desired spot on  
the page, scroll up or down. Press 8 again to zoom in and view the desired section  
of the page.  
Web feeds and blogs  
Web feeds are .xml files on web pages that are widely used to share the latest  
entry headlines or full text, for example, recent news in the form of news feeds.  
Blogs or weblogs are web diaries. Most of the web feeds use RSS and ATOM  
technologies.  
The browser automatically detects if a web page contains web feeds. To subscribe  
to a web feed, select Options > Subscribe and a feed, or click on the link. To view  
the web feeds you have subscribed to, in the bookmarks view, select Web feeds.  
To update a web feed, select it, and Options > Refresh.  
To define how the web feeds are updated, select Options > Settings > Web feeds.  
Saved pages  
You can save pages and view them later offline.  
To save a page while browsing, select Options > Tools > Save page.  
To open the Saved pages view, in the bookmarks view, select Saved pages. To open  
a page, select it.  
To start a connection to the browser service and retrieve the page again, select  
Options > Navigation options > Reload. The phone stays online after you reload  
the page.  
Download  
You can download items such as ringing tones, images, operator logos, software,  
and video clips using the mobile browser.  
63  
Once downloaded, items are handled by the respective applications on your  
phone, for example, a downloaded photo is saved in Gallery.  
Important: Only install and use applications and other software from trusted  
sources, such as applications that are Symbian Signed or have passed the Java  
VerifiedTM testing.  
End a connection  
To end the connection and view the browser page offline, select Options > Tools >  
Disconnect. To quit browsing and to return to the standby mode, select Options >  
Exit.  
Empty the cache  
A cache is a memory location that is used to store data temporarily. If you have tried to  
access or have accessed confidential information requiring passwords, empty the cache  
after each use. The information or services you have accessed are stored in the cache. To  
empty the cache, select Menu > Web > Browser > Options > Clear privacy data > Clear  
cache.  
To clear all privacy data, including the cache, cookies, form data passwords, and  
browsing history, select Menu > Web > Browser > Options > Clear privacy data >  
All.  
Browser settings  
Select Options > Settings > General, Page, Privacy or Web feeds, and from the  
following:  
General  
Access point—Select the default access point.  
Homepage—Define the address of the desired homepage.  
Mini map—Set on or off.  
History list—Select whether a list of the pages you have visited during the current  
browsing session are displayed when you select Back.  
Security warnings—Hide or show security notifications.  
Java/Ecma Script—Enable or disable the use of scripts.  
64  
Page  
Load images and sounds—Select whether to view pictures and hear sounds when  
you are browsing. If you select No, to later load images and sounds during  
browsing, select Options > Tools > Load images.  
Screen size—Choose how to use the display area for viewing pages.  
Default encoding—When you select Automatic, the browser automatically tries to  
choose the correct character encoding.  
Block pop-ups—Allow or block automatic opening of different pop-ups while  
browsing.  
Automatic reload—Enable or disable automatic refresh of browser pages.  
Font size—Select the font size.  
Privacy  
Auto. bookmarks—Select On if you want the bookmarks to be automatically saved  
in the Auto. bookmarks folder when you visit a page. When you select Hide folder,  
the bookmarks are still automatically added to the folder.  
Form data saving—If you do not want the data you enter to different forms on a  
web page to be saved and used next time the page is entered, select Off.  
Cookies—Enable or disable the receiving and sending of cookies (a means for  
content providers to identify users and their preferences for frequently used  
content).  
Web feeds  
Automatic updates—Define whether you want the web feeds to be updated  
automatically or not, and how often you want to update them. Setting the  
application to retrieve web feeds automatically may involve the transmission of  
large amounts of data through your service provider's network. Contact your  
service provider for information about data transmission charges.  
Acc. point for auto-update—Select the desired access point for updating (only  
available when Automatic updates is on).  
12. Organizer  
Clock  
Select Menu > Organiser > Clock.  
65  
Clock settings  
To change the time or date, select Options > Settings. For more information about  
the settings, see “Date and time,” p. 73.  
Set an alarm  
1. To set a new alarm, scroll right to Alarm, and select Options > New alarm.  
2. Enter the alarm time, select whether and when the alarm is repeated, and  
select Done. When an alarm is active,  
is shown.  
To cancel an alarm, scroll to the alarm, and select Options > Remove alarm. To  
deactivate a repeated alarm, select Options > Deactivate alarm.  
Turn off the alarm  
Select Stop to turn off the alarm.  
Select Snooze to stop the alarm for 5 minutes, after which it resumes.  
If the alarm time is reached while the device is switched off, the device switches itself on  
and starts sounding the alarm tone. If you select Stop, the device asks whether you want to  
activate the device for calls. Select No to switch off the device or Yes to make and receive  
calls. Do not select Yes when wireless phone use may cause interference or danger.  
World clock  
To open the world clock view, scroll right to World. To add cities to the list, select  
Options > Add city.  
To set your current city, scroll to a city, and select Options > Set as current city.  
The city is displayed in the clock main view, and the time in your device is changed  
according to the city selected. Check that the time is correct and matches your  
time zone.  
Calendar  
Select Menu > Organiser > Calendar.  
In the calendar, you can keep track of your appointments, meetings, birthdays,  
anniversaries, and other events. You can also set a calendar alarm to remind you  
of upcoming events.  
66  
Create calendar entries  
1. Select Options > New entry and an entry type.  
Anniversary entries are repeated every year.  
2. Fill in the fields.  
Repeat—Press the scroll key to change the entry to be repeated. A repeating  
entry is indicated by  
in the day view.  
Repeat until—Set an ending date for the repeated entry, for example, the last  
date of a weekly course you are taking. This option is shown only if you have  
selected to repeat the event.  
Synchronisation > Private—After synchronization the calendar entry can be  
seen only by you, and it is not shown to others even if they have online access  
to view the calendar. Public—The calendar entry is shown to others who have  
access to view your calendar online. None—The calendar entry is not copied  
when you synchronize your calendar.  
3. To save the entry, select Done.  
Calendar views  
Press # in the month, week, or day views to automatically highlight the current  
date.  
To create a meeting entry, press any number key (09) in any calendar view.  
To go to a certain date, select Options > Go to date. Write the date, and select OK.  
To-do  
Select Options > To-do view.  
In the To-do view, you can keep a list of tasks that you need to do.  
Create a to-do note  
1. To start to write a to-do note, press any number key (09).  
2. Write the task in the Subject field. Set a due date and a priority for the task.  
3. To save the to-do note, select Done.  
Notes  
Select Menu > Organiser > Notes.  
To write a new note, start writing. To save the note, select Done.  
67  
You can save plain text files (.txt format) you receive to Notes.  
Calculator  
Select Menu > Organiser > Calculator.  
1. Enter the first number of your calculation.  
2. Scroll to an arithmetic function, and select it.  
3. Enter the second number.  
4. To execute the calculation, select  
.
To add a decimal, press #.  
Note: This calculator has limited accuracy and is designed for simple calculations.  
Converter  
Select Menu > Organiser > Converter.  
In the converter, you can convert measurement parameters such as Length from  
one unit to another, for example, Yards to Metres.  
The converter has limited accuracy and rounding errors may occur.  
Set a base currency and exchange rates  
Before you can convert currency, you need to choose a base currency (usually your  
domestic currency) and add exchange rates.  
The rate of the base currency is always 1. The base currency determines the  
conversion rates of the other currencies.  
1. Select Currency as the measurement type, and select Options > Currency  
rates.  
2. To change the base currency, scroll to the currency (usually your domestic  
currency), and select Options > Set as base currency.  
3. Add exchange rates, scroll to the currency, and enter a new rate, that is, how  
many units of the currency equal one unit of the base currency you selected.  
4. After you insert all the required exchange rates, you can convert currency.  
Note: When you change base currency, you must enter new exchange rates  
because all previously set exchange rates are cleared.  
68  
Convert units  
To convert currency, you must first set the exchange rate. See “Set a base currency  
and exchange rates,” p. 68.  
1. Select Type and the type of measurement to convert, and select OK.  
2. Select the first Unit field, the unit from which you want to convert, and OK.  
3. Select the next Unit field and the unit to which you want to convert.  
4. In the first Amount field, enter the value to be converted. The other Amount  
field changes automatically to show the converted value.  
Press # to add a decimal and press * for the +, - (for temperature), and E  
(exponent) symbols.  
The conversion order changes if you write a value in the second Amount field. The  
result is shown in the first Amount field.  
13. Applications  
Download!  
Download! (network service) is a mobile content shop available on your device.  
You may be able to download some content free of charge.  
With Download! you can discover, preview, buy, download, and upgrade content,  
services, and applications. The items are categorized under catalogs and folders  
provided by different service providers. The available content depends on your  
service provider.  
Select Menu > Applications > Download!.  
Download! uses your network services to access the most up-to-date content. For  
information on additional items available through Download!, contact your  
service provider, or the supplier or manufacturer of the item.  
My own  
To access the applications you have downloaded in your phone, select Menu >  
Applications > My own.  
69  
GPS data  
This feature is not designed to support positioning requests for related calls.  
Contact your service provider for more information about how your phone  
complies with government regulations on location-based emergency calling  
services.  
GPS data is a GPS application that enables you to view your current location, find  
your way to a desired location, and track distance. The application requires a  
Bluetooth GPS enhancement to operate. You must also have Bluetooth GPS  
positioning method enabled in Menu > Settings > Phone sett. > General >  
Positioning > Positioning methods.  
Select Menu > Applications > My own > GPS data.  
In GPS data and Landmarks, coordinates are expressed in degrees and decimal  
degrees format using WGS-84 coordinate system.  
Landmarks  
Landmarks are coordinates to geographic locations that you can save to your  
device for later use in different location-based services. You can create landmarks  
using a Bluetooth GPS enhancement or network (network service).  
Select Menu > Applications > My own > Landmarks.  
14. Settings  
Voice commands  
To select the functions to use by voice command, select Menu > Settings > Voice  
comm.. The voice commands for changing profiles are in the Profiles folder.  
To activate a new voice command for an application, select Options > New  
application and the application.  
To manage the voice commands, scroll to a function, select Options and from the  
following options:  
Change command or Remove application—to change or deactivate the voice  
command of the selected function  
Playback—to play the activated voice command  
To use voice commands, see “Voice dialing,” p. 22.  
70  
To change voice command settings, select Options > Settings and from the  
following options:  
Synthesiser—to activate or deactivate the text-to-speech syntheziser that says  
out loud the recognized voice command  
Remove voice adapts.—to reset the voice adaptations. The phone adapts to the  
user’s voice to better recognize the voice commands.  
Call mailbox  
Call mailbox is a network service. Contact your service provider for the call  
mailbox number.  
To define the call mailbox number if no number is set, select Menu > Settings >  
Call mailbox, and when Voice mailbox number: is displayed, enter the voice  
mailbox number.  
To change the call mailbox number, select Menu > Settings > Call mailbox >  
Options > Change number, and enter the number.  
Speed dial  
To assign phone numbers to the speed dialing keys, select Menu > Settings >  
Speed dial, scroll to a key icon, and select Options > Assign. Select the contact  
and the number for the speed dial.  
To view the number assigned to a speed-dialing key, scroll to the key icon, and  
select Options > View number. To change or remove the number, select Change or  
Remove.  
Phone settings  
General  
Select Menu > Settings > Phone sett. > General > Personalisation, Date and time,  
Enhancement, Security, Factory settings, or Positioning.  
Personalisation  
Select Display, Standby mode, Tones, Language, Themes, or Voice comms..  
Display  
Light sensor—to adjust the light sensor that observes the lighting conditions and  
adjusts the brightness of the display  
71  
Font size—to select the font size used in lists and editors  
Power saver time-out—to set the time-out period after which the power saver is  
activated  
Welcome note / logo—to set the welcome note or logo which is displayed briefly  
each time you switch on the phone.  
Light time-out—to set the time-out for the display light  
Standby mode  
Active standby—to enable or disable active standby. See “Active standby,” p. 16.  
Shortcuts—to assign shortcuts for the right and left selection keys, scrolling in  
different directions or pressing the scroll key in the standby mode. The scroll key  
shortcuts are not available if Active standby is On.  
Active standby apps.—to select the application shortcuts to appear in the active  
standby. This setting is available only if Active standby is set to On.  
Operator logo—this setting is visible only if you have received and saved an  
operator logo. You can select whether the operator logo is shown.  
Tones  
Change the tones of the clock, calendar and currently active profile. See “Profiles,”  
p. 58.  
Language  
Phone language—to change the language for the display texts in your phone. This  
change may also affect the format used for date and time and the separators used,  
for example, in calculations. If you select Automatic, the phone selects the  
language according to the information on your SIM card. After you have changed  
the display text language, the phone restarts.  
Writing language—to change the writing language of your phone. Changing the  
language affects the characters and special characters available when writing  
text and the predictive text dictionary used.  
Predictive text—to set predictive text input On or Off for all editors in the phone.  
Select a language for entering predictive text from the list.  
Themes  
Apply themes. See “Themes,” p. 58.  
Voice commands  
Edit voice command and voice dialing settings. See “Voice commands,” p. 70.  
72  
Date and time  
Time and Date—to set the time and date  
Time zone—to set the time zone of your location. If you set Network operator  
time > Auto-update, the local time is shown.  
Date format—to select the format to display dates  
Date separator—to select the date separator  
Time format—to select between 24-hour and 12-hour time format  
Time separator—to select the time separator  
Clock type—to select whether the analog or digital clock is shown in the standby  
mode. See “Clock,” p. 65.  
Clock alarm tone—to select the alarm clock tone  
Workdays—to specify days for alarms repeated only on workdays  
Network operator time (network service) — to allow the network to update time,  
date, and time zone information to your phone. If you select Auto-update, all  
active connections are disconnected. Check any alarms as these may be affected.  
Enhancement  
To change settings of an enhancement, in the Enhancement sett. view, scroll to an  
enhancement, such as Headset, select Options > Open and from the following  
options:  
Default profile—to select the profile you want to activate each time you connect  
the enhancement to your phone  
Automatic answer—to set the phone to answer an incoming call automatically  
after 5 seconds when this enhancement is connected to your phone. If the Ringing  
type is set to Beep once or Silent, automatic answer cannot be used, and you must  
answer the phone manually.  
Lights—To set the phone lights continuously on while using the enhancement,  
select On.  
Security  
Select Phone and SIM card, Certificate management, or Security module.  
Phone and SIM card  
You can change the following codes: lock code, (U)PIN code, and PIN2 code. These  
codes can only include the numbers from 0 to 9.  
73  
Avoid using access codes similar to emergency numbers to prevent accidental  
dialing of the emergency number.  
Code in use—to select the active code, PIN or UPIN, for the active USIM. This is  
shown only if the active USIM supports UPIN, and the UPIN is not rejected.  
PIN code request or UPIN code request—to set the phone to request the code each  
time the phone is switched on. Some SIM cards may not allow the PIN code  
request to be turned Off. If you select Code in use > UPIN, UPIN code request is  
shown instead.  
PIN code or UPIN code, PIN2 code, and Lock code—to change the codes  
Keypad autolock period > User defined—to automatically lock the keypad after a  
defined period of inactivity  
Phone autolock period—to set a time-out after which the phone is automatically  
locked. To use the phone again, you need to enter the correct lock code. To turn off  
the autolock period, select None.  
Lock if SIM card changed—to set the phone to prompt for the lock code when an  
unknown, new SIM card is inserted into your phone. The phone keeps a list of SIM  
cards that are recognized as the owner cards.  
Closed user group (network service)—to specify a group of people whom you can  
call and who can call you. For more information, contact your service provider. To  
activate the default group agreed on with the service provider, select Default. If  
you want to use another group (you need to know the group index number), select  
On.  
When calls are limited to closed user groups, calls may be possible to the official emergency  
number programmed into your device.  
Confirm SIM services (network service)—to set the phone to display confirmation  
messages when you use a SIM card service  
Certificate management  
A list of authority certificates that have been stored in your phone is displayed in  
Certificate management. To see a list of personal certificates if available,  
scroll right.  
Digital certificates should be used if you want to connect to an online bank or  
another site or remote server for actions that involve transferring confidential  
information. They should also be used if you want to reduce the risk of viruses or  
other malicious software and be sure of the authenticity of software when  
downloading and installing software.  
74  
Important: Even if the use of certificates makes the risks involved in remote  
connections and software installation considerably smaller, they must be used  
correctly in order to benefit from increased security. The existence of a certificate  
does not offer any protection by itself; the certificate manager must contain  
correct, authentic, or trusted certificates for increased security to be available.  
Certificates have a restricted lifetime. If "Expired certificate" or "Certificate not  
valid yet" is shown even if the certificate should be valid, check that the current  
date and time in your device are correct.  
Before changing any certificate settings, you must make sure that you really trust  
the owner of the certificate and that the certificate really belongs to the listed  
owner.  
View certificate details and check authenticity  
You can only be sure of the correct identity of a server when the signature and the  
period of validity of a server certificate have been checked.  
The phone notifies you if the identity of the server is not authentic or if you do not  
have the correct security certificate in your phone.  
To check certificate details, scroll to a certificate, and select Options > Certificate  
details. While opening the certificate details, the phone checks the validity of the  
certificate and one of the following notes may appear:  
Expired certificate—The validity period has ended for the selected certificate.  
Certificate not valid yet—The validity period has not yet begun for the selected  
certificate.  
Certificate corrupted—The certificate cannot be used. Contact the certificate  
issuer.  
Certificate not trusted—You have not set any application to use the certificate.  
Change the trust settings  
Before changing any certificate settings, you must make sure that you really trust  
the owner of the certificate and that the certificate really belongs to the listed  
owner.  
Scroll to an authority certificate, and select Options > Trust settings. Depending  
on the certificate, a list of the applications that can use the selected certificate is  
shown.  
Security module  
View or edit security modules.  
75  
Factory settings  
Reset some of the settings to their original values. You need the lock code. See  
“Lock code,” p. 8.  
Positioning  
With the positioning service you can receive information from service providers  
about local issues such as weather and traffic conditions, based on the location of  
your device (network service).  
To enable a positioning method, select Positioning methods, scroll to the  
positioning method, and select Options > Enable. To stop using it, select  
Options > Disable.  
To define the positioning server access point, select Positioning server > Access  
point and the desired access point. Then select Server address, and enter the  
domain name or URL address of the server.  
Phone  
Select Menu > Settings > Phone sett. > Phone and Call, Call divert, Call barring, or  
Network.  
Call  
Send my caller ID (network service)—to set your phone number to be displayed  
(Yes) or hidden (No) from the person whom you are calling. The value may be set  
by your service provider when you subscribe to the service (Set by network).  
Call waiting (network service)—to set the network to notify you of a new incoming  
call while you have a call in progress. To request the network to activate call  
waiting, select Activate. To request the network to deactivate call waiting, select  
Cancel. To check whether the function is active, select Check status.  
Reject call with SMS—to enable rejecting phone calls with a text message. See  
“Answer or reject a call,” p. 23.  
Message text—to enter a text to be sent when you reject a call with a text  
message  
Image in video call—to select a still image to be shown instead of the video when  
you deny video sending in a video call  
Automatic redial—to set the phone to make a maximum of 10 attempts to  
connect the call after an unsuccessful call attempt. Press the end key to stop  
automatic redialing.  
76  
Show call duration—to set the phone to display the call duration during a call  
Summary after call—to set the phone to briefly display the approximate duration  
of the last call  
Speed dialling > On—to set the phone to dial the numbers assigned to the speed  
dialing keys, 2 to 9, by pressing and holding the corresponding number key  
Anykey answer > On—to answer an incoming call by briefly pressing any key,  
except the right selection key, volume keys, and the end key  
Line in use (network service)—shown only if the SIM card supports two subscriber  
numbers, that is, two phone lines. Select which phone line (Line 1 or Line 2) you  
want to use for making calls and sending short messages.  
Calls on both lines can be answered irrespective of the selected line. You cannot  
make calls if you select Line 2 and have not subscribed to this network service. To  
prevent line selection, select Line change > Disable if supported by your SIM card.  
To change this setting, you need the PIN2 code.  
Call divert  
Call divert is a network service.  
1. Select which calls you want to divert: Voice calls, Data and video calls, or Fax  
calls.  
2. Select the desired option. For example, to divert voice calls when your number  
is busy or when you reject an incoming call, select If busy.  
3. To set the divert option on or off, select Options > Activate or Cancel. To check  
whether the option is activated, select Check status. Several divert options can  
be active at the same time.  
Call barring and call diverting cannot be active at the same time.  
Call barring  
Call barring (network service) allows you to restrict the calls that you make and  
receive with your phone. To change the settings, you need the barring password  
from your service provider.  
Scroll to the desired barring option, and to request the network to set call  
restriction on, select Options > Activate. To set the selected call restriction off,  
select Cancel. To check whether the calls are barred, select Check status. To  
change the barring password, select Edit barring password. To cancel all active call  
barrings, select Cancel all barrings.  
Call barring and call diverting cannot be active at the same time.  
77  
When calls are barred, calls may be possible to certain official emergency numbers.  
Network  
Network mode—To select which network to use (shown only if supported by the  
service provider). If you select Dual mode, the device uses the GSM or UMTS  
network automatically, according to the network parameters and the roaming  
agreements between the network operators.  
Operator selection—To set the phone to search for and select automatically one of  
the available networks, select Automatic. To select the desired network manually  
from a list of networks, select Manual. If the connection to the manually selected  
network is lost, the phone sounds an error tone and asks you to select a network  
again. The selected network must have a roaming agreement with your home  
network, that is, the operator whose SIM card is in your phone.  
Cell info display (network service)—To set the phone to indicate when it is used in  
a cellular network based on microcellular network (MCN) technology and to  
activate cell info reception, select On.  
Connection  
Select Menu > Settings > Phone sett. > Connection > Bluetooth, USB, Access  
points, Packet data, Data call, SIP settings, Configurations, or APN control.  
Bluetooth  
Switch Bluetooth on or off, and edit Bluetooth settings. See “Bluetooth  
connection,” p. 84.  
USB  
Edit USB settings. See “USB data cable,” p. 93.  
Access points  
To establish a data connection, an access point is required. You can define  
different kinds of access points:  
• MMS access point to send and receive multimedia messages  
• WAP access point to view web pages  
• Internet access point (IAP) (for example, to send and receive e-mail)  
Check which kind of access point you need with your service provider for the  
service you wish to access. For availability and subscription to data connection  
services, contact your service provider.  
78  
You may receive access point settings in a message from your service provider, or  
you may have preset access point settings in your phone.  
To create a new access point or edit an existing access point, select Options >  
New access point or Edit. To create a new access point using the settings of an  
existing access point, scroll to an access point, and select Options > Duplicate  
access point.  
Depending on the connection type selected in Data bearer, only certain settings  
are available. Fill in all fields marked with Must be defined or with an asterisk.  
Contact your service provider for the following settings: Data bearer, Access point  
name (for packet data only), Dial-up number (for data call only), User name,  
Password, Authentication, Homepage, Data call type (for data call only), and  
Maximum data speed (for data call only).  
Connection name—Enter a descriptive name for the connection.  
Prompt password—If you must enter a new password every time you log onto a  
server, or if you do not want to save your password to the phone, select Yes.  
If necessary, to define the internet protocol (IP) version, phone IP address, domain  
name system (DNS) servers, proxy server, and advanced data call settings, such as  
callback, PPP compression, login script, and modem initialization string, select  
Options > Advanced settings. Contact your service provider for the correct  
settings.  
Packet data  
The packet data settings affect all access points using a packet data connection.  
Packet data connection—If you select When available and you are in a network  
that supports packet data, the phone registers to the packet data network and  
short messages are sent using a packet data connection. If you select When  
needed, the phone uses a packet data connection only if you start an application  
or function that needs it. The packet data connection can be closed when it is not  
needed by any application.  
If there are no packet data services available and you have chosen When available,  
the phone periodically tries to establish a packet data connection.  
Access point—The access point name is needed when you want to use your phone  
as a modem with your computer.  
Data call  
The data call settings affect all access points that use a GSM data call.  
79  
Online time—to set the data call to disconnect automatically after a time-out if  
there is no activity. To enter a time-out, select User defined, and enter the time in  
minutes. If you select Unlimited, the data call is not disconnected automatically.  
SIP settings  
View and edit session initiation protocol (SIP) profiles.  
Configurations  
Certain functions, such as web browsing and multimedia messaging, may require  
configuration settings. You may receive the settings from your service provider.  
See “Configuration settings,” p. 13.  
To delete a configuration, scroll to the configuration, and select Options > Delete.  
Access point name control  
With the access point name control service, you can restrict the use of packet data  
access points. This setting is only available if your SIM card supports the service.  
To change the settings, you need the PIN2 code.  
Applications  
To view and edit settings of applications installed to your phone, select Menu >  
Settings > Phone sett. > Applications.  
Speech  
In Speech, you can select the default language and voice used for reading  
messages and adjust the voice properties, such as rate and volume. Select Menu >  
Settings > Speech.  
To automatically detect the language of a message and read the message using  
that language, select Language detection > On. When reading a message, if there  
is no voice available for the language or if Language detection is set to Off, the  
default language is used.  
To view details of a voice, scroll right, scroll to the voice, and select Options >  
Voice details. To test a voice, scroll to the voice, and select Options > Play voice.  
Settings wizard  
Sett. wizard configures your device for operator (MMS, GPRS, and internet) and  
e-mail settings based on your service provider. Configuring other settings may  
also be possible.  
80  
To use these services, you may have to contact your service provider to activate a  
data connection or other services.  
Select Menu > Settings > Sett. wizard.  
Instant messaging  
Instant messaging (IM) allows you to converse with others and join discussion  
forums (IM groups) with specific topics (network service).  
Check the availability of IM services, pricing, and tariffs with your service provider.  
Service providers also provide instructions on how to use their services.  
Connect to an IM server  
Select Menu > Settings > IM.  
1. To log in, select Options > Log in.  
2. Enter your user ID and password.  
To log out, select Options > Log out.  
IM settings  
Select Menu > Settings > IM > Options > Settings.  
To edit the IM application settings, select IM settings. To set who is allowed to see  
when you are online, select Show my availability. To set who is allowed to send  
you messages or invitations, select Allow messages from or Allow invitations from.  
To edit IM server connection settings, select Servers, scroll to the server, and select  
Options > Edit. Contact your service provider for the settings. To define new  
server settings, select Options > New server.  
To choose the default server, select Default server and the server.  
To be automatically connected to the IM server during the days and times you  
define, select IM login type > Automatic. To only be automatically connected  
while in your home network, select Auto in home netw.. To be automatically  
connected when you start the IM application, select On app. start-up. To connect  
manually, select Manual.  
To set days and times when to establish a connection automatically, select  
Automatic login days and Automatic login hrs..  
81  
Join and leave an IM group  
Select Menu > Settings > IM > IM groups.  
IM groups are only available if supported by the service provider.  
To join an IM group, select it. To join an IM group not on the list, but whose group  
ID you know, select Options > Join new group, and enter the group ID.  
To leave the IM group, select Options > Leave IM group.  
Search for IM groups and users  
To search for groups, select Menu > Settings > IM > IM groups > Options >  
Search. You can search IM groups by Group name, Topic, or Members (user ID). To  
join or save a group that is found in the search, scroll to it, and select Options >  
Join or Save.  
To search for new contacts, select IM contacts > Options > New IM contact >  
Search from server. To start a conversation with a new user, scroll to the user, and  
select Options > Open conversation. To save the new contact, select Add to IM  
contacts.  
Chat in an IM group  
Select Menu > Settings > IM > IM groups.  
After you join an IM group, you can view the messages that are exchanged in the  
group, and send your own messages.  
To send a message, write the message, and press the scroll key.  
To send a private message to a member (if allowed in the group), select Options >  
Send private message, select the recipient, write the message, and press the  
scroll key.  
To reply to a private message sent to you, scroll to the message, and select  
Options > Reply.  
To invite IM contacts who are online to join the IM group (if allowed in the group),  
select Options > Send invitation, select the contacts you want to invite, write the  
invitation message, and select Done.  
Start and view individual conversations  
Select Menu > Settings > IM > Conversations.  
This shows a list of the IM users with whom you have an ongoing conversation.  
82  
next to a user indicates that you have received a new message from that user.  
To view an ongoing conversation, select the user. To send a message, write your  
message, and press the scroll key. To return to the conversations list without  
closing the conversation, select Back.  
To start a new conversation, select Options > New conversation > Select recipient  
and from a list of your saved IM contacts that are currently online; or select Enter  
user ID to enter the user ID.  
To close the conversation, select Options > End conversation.  
To save a user to your IM contacts, scroll to the user, and select Options > Add to  
IM contacts.  
To block messages from a user, scroll to the user, and select Options > Blocking  
options > Add to blocked list.  
IM contacts  
Select Menu > Settings > IM > IM contacts.  
You can see a list of your saved IM contacts.  
indicates contacts that are  
currently online, and indicates contacts that are offline.  
To create a new contact, select Options > New IM contact. Fill in the Nickname  
and User ID fields, and select Done.  
To start or continue a conversation with a contact, scroll to the contact, and select  
Options > Open conversation.  
Create a new IM group  
Select Menu > Settings > IM > IM groups > Options > Create new group. Enter  
the settings for the group.  
Restrict access to an IM group  
To create a closed IM group, create a group members list. Only the users on the list  
are allowed to join the group. Select the IM groups view, scroll to the group, and  
select Options > Group > Settings > Group members > Selected only.  
83  
15. Connectivity  
PC Suite  
You can use your phone with a variety of PC connectivity and data  
communication applications. With PC Suite you can synchronize contacts,  
calendar and to-do notes and notes between your phone and a compatible PC.  
You may find more information about PC Suite and the download link in the  
support area on the Nokia website, www.nokia.com/pcsuite.  
Bluetooth connection  
Bluetooth technology enables wireless connections between electronic devices  
within a maximum range of 10 meters (33 feet). A Bluetooth connection can be  
used to send images, videos, text, business cards, calendar notes, or to connect  
wirelessly to compatible devices using Bluetooth technology, such as computers.  
This device is compliant with Bluetooth Specification 2.0 supporting the following profiles:  
Dial Up Networking, Serial Port, File Transfer, Handsfree, Headset, Basic Imaging, SIM  
Access, Generic Access, and Advanced Audio Distribution. To ensure interoperability  
between other devices supporting Bluetooth technology, use Nokia approved enhancements  
for this model. Check with the manufacturers of other devices to determine their  
compatibility with this device.  
There may be restrictions on using Bluetooth technology in some locations. Check with your  
local authorities or service provider.  
Features using Bluetooth technology, or allowing such features to run in the background  
while using other features, increase the demand on battery power and reduce the battery  
life.  
Bluetooth connection settings  
Select Menu > Settings > Connectivity > Bluetooth.  
When you activate Bluetooth technology for the first time, you are asked to give a  
name to your phone.  
Bluetooth—to switch Bluetooth on or off.  
My phone's visibility > Shown to all—to allow your phone to be found by other  
Bluetooth devices at all times. To allow your phone to be found for a defined time  
period, select Define period. For security reasons it is advisable to use the Hidden  
setting whenever possible.  
84  
My phone's name—to define a name for your phone.  
Remote SIM mode > On—to enable the usage of the SIM card of the phone by  
another device (for example, a car kit) by Bluetooth technology (SIM access  
profile)  
When the wireless device is in the remote SIM mode, you can only use a compatible  
connected enhancement, such as a car kit, to make or receive calls. Your wireless device will  
not make any calls, except to the emergency numbers programmed into your device, while in  
this mode. To make calls from your device, you must first leave the remote SIM mode. If the  
device has been locked, enter the lock code to unlock it first.  
Send data  
There can be only one active Bluetooth connection at a time.  
1. Open an application where the item you wish to send is saved.  
2. Scroll to the item you want to send, and select Options > Send > Via  
Bluetooth.  
3. The phone starts to search for devices within range. Paired devices are shown  
with  
.
When searching for devices, some devices may show only the unique device  
addresses. To find out the unique address of your phone, enter the code  
*#2820# in the standby mode.  
If you have searched for devices earlier, a list of the devices that were found  
previously is shown first. To start a new search, select More devices. If you  
switch off the phone, the list of devices is cleared, and the device search needs  
to be started again before sending data.  
4. Select the device with which you want to connect.  
5. Pair the devices  
• If the other device requires pairing before data can be transmitted, a tone  
sounds and you are asked to enter a passcode.  
• Create your own passcode (1–16 digits) and agree with the owner of the  
other device to use the same code. You do not have to memorize the  
passcode.  
• After pairing, the device is saved to the Paired devices view.  
6. When the connection has been successfully established, the note Sending data  
is displayed.  
Data received using Bluetooth connection can be found in Inbox in Messaging.  
85  
Paired devices view  
Paired devices are indicated by in the search result list. In the Bluetooth main  
view, scroll right to open a list of paired devices.  
Do not accept Bluetooth connections from sources you do not trust.  
To pair with a device, select Options > New paired device. Select the device with  
which to pair. Exchange passcodes.  
To cancel pairing, scroll to the device whose pairing you want to cancel, and press  
the clear key. If you want to cancel all pairings, select Options > Delete all.  
To set a device to be authorized, scroll to the device, and select Options > Set as  
authorised. Connections between your phone and the authorized device can be  
made without your knowledge. No separate acceptance or authorization is  
needed. Use this status only for your own devices to which others do not have  
access, for example, your PC or devices that belong to someone you trust. is  
added next to authorized devices in the Paired devices view. If you select Set as  
unauthorised, each connection request from the device must be accepted  
separately.  
Receive data  
When you receive data using Bluetooth technology, a tone sounds, and you are  
asked if you want to accept the message. If you accept, the item is placed in Inbox  
in Messaging.  
Disconnect Bluetooth connection  
A Bluetooth connection is disconnected automatically after sending or receiving  
data.  
Connection manager  
In the connection manager, you can identify the status of multiple data  
connections, view details on the amount of data sent and received, and end  
unused connections.  
Select Menu > Settings > Connectivity > Conn. mgr..  
Note: The actual invoice for calls and services from your service provider may vary,  
depending on network features, rounding off for billing, taxes, and so forth.  
To view connection details, scroll to a connection, and select Options > Details.  
86  
To end a connection, scroll to the connection, and select Options > Disconnect. To  
end all connections, select Options > Disconnect all.  
Push to talk  
Push to talk (PTT) (network service) is a real-time voice over IP service (network  
service) available over a GSM/GPRS network. PTT provides direct voice  
communication connected with a single keypress.  
Before you can use the PTT service, you must define the PTT access point and PTT  
settings.  
In PTT communication, one person talks while the others listen. Speakers take  
turns responding to each other. Only one group member can talk at a time. The  
length of time of each turn is limited.  
Phone calls always take priority over PTT calls.  
Besides the packet data counters, the phone registers only one-to-one calls in the  
recent calls lists in Log. The participants should confirm the reception of any  
communications where appropriate as there is no other confirmation of whether  
the recipients have heard the call.  
To check availability and costs, and to subscribe to the service, contact your  
service provider. Note that roaming services may be more limited than home  
network services.  
Many of the services available for traditional voice calls (for example, call  
mailbox) are not available for PTT communications.  
Define a PTT access point  
Many service providers require you to use an internet access point for your default  
access point. Other service providers allow you to use a WAP access point.  
Settings for PTT  
For PTT service settings, contact your service provider.  
To view and change PTT settings, select Menu > Settings > Connectivity > PTT >  
Options > Settings > User settings or Connection settings.  
87  
User settings  
Accepted list calls—To see a notification of incoming calls, select Notify. To answer  
PTT calls automatically, select Auto-accept. If you do not want to receive PTT calls,  
select Not allowed.  
PTT call alert tone—Select the tone for incoming PTT calls. If you want the  
incoming call alert setting for PTT to follow your profile settings, select Set by  
profile. For example, if your profile is silent, PTT is set to do not disturb (DND) and,  
except for callback requests, you are not available to others using PTT.  
Callback request tone—Select a tone for callback requests.  
Application start-up—To start PTT automatically, select Always automatic. To start  
PTT automatically only while in your home network, select Auto. in home netw..  
Default nickname—Enter your nickname shown to other users. Your service  
provider may have disabled the editing of this option.  
Show my PTT address—Select Never if you want to hide your PTT address from  
others.  
Show my login status—Select whether your status is shown to others.  
Connection settings  
Contact your PTT service provider for the connection settings.  
Log in to PTT  
Select Menu > Settings > Connectivity > PTT. PTT automatically logs in to the  
service when started.  
When log in is successful, PTT automatically connects to channels that were  
active when the application was last closed. If the connection is lost, the device  
automatically tries to log back in until you exit PTT.  
indicates a PTT connection.  
indicates that PTT is set to do not disturb (DND).  
Exit PTT  
Select Menu > Settings > Connectivity > PTT > Options > Exit. Log out from PTT  
after exiting application? is displayed. Select Yes to log out and close the service.  
If you want to keep the application active in the background, select No.  
88  
Make a one-to-one call  
Warning: Do not hold the device near your ear when the loudspeaker is in use,  
because the volume may be extremely loud.  
1. Select Menu > Settings > Connectivity > PTT > Options > Contacts, scroll to  
the contact you want to talk to, and press the call key.  
2. When the connection has been established, to talk to the other participant,  
press and hold the call key while you talk.  
3. To end the PTT call, select Disconnect, or if there are several PTT calls, select  
Options > Disconnect.  
Answer a PTT call  
If Accepted list calls is set to Notify in User settings, a short tone notifies you of an  
incoming call. To accept the call, select Accept. To silence the tone, select Silence.  
To reject the call, press the end key.  
Make a PTT group call  
To call a group, select Options > Contacts, select Options > Talk to many, mark  
the contacts you want to call, and press the call key.  
Callback requests  
Send a callback request  
If you make a one-to-one call and do not get a response, you can send a request  
for the person to call you back.  
To send a callback request from Contacts, scroll to a contact, and select Options >  
Send callback request.  
Respond to a callback request  
When someone sends you a callback request, 1 new callback request is displayed  
in the standby mode. Select Show to open Callback inbox. Scroll to a contact, and  
press the call key.  
Channels  
When you are connected to a channel, all members joined to the channel hear you  
talking. Up to five channels can be active at the same time. When more than one  
channel is active, select Swap to change the channel you want to talk to.  
89  
Channels are registered with a URL address. One user registers the channel URL in  
the network by joining the channel the first time.  
Create your own channel  
1. Select Options > PTT channels.  
2. Select Options > New channel > Create new.  
3. Enter a Channel name.  
4. Select a Channel privacy level.  
5. Enter your own nickname in Nickname.  
6. If you want to add a thumbnail image to the group, select Thumbnail and an  
image.  
7. Select Done. When you have created a channel, you are asked if you want to  
send channel invitations. Channel invitations are text messages.  
Join a preconfigured channel  
A preconfigured channel is a talk group that is set up by your service provider.  
Only preconfigured users are allowed to join and use the channel.  
1. Select Options > PTT channels.  
2. Select Options > New channel > Add existing.  
3. Enter the Channel name, Channel address, and Nickname. You can also add a  
Thumbnail.  
4. Select Done.  
Respond to a channel invitation  
To save a received channel invitation, select Options > Save channel. The channel  
is added to your PTT contacts, channels view.  
PTT sessions  
PTT sessions are displayed as call bubbles in the PTT display, giving information  
about the status of the PTT sessions:  
Wait—shown when you press and hold the call key and somebody else is still  
speaking in the PTT session  
Talk—shown when you press and hold the call key and get the permission to speak  
To switch the loudspeaker on or off, select Options > Activate loudspeaker or  
Deactivate loudspeaker.  
90  
To disconnect the selected PTT session, select Options > Disconnect.  
Remote synchronization  
Sync enables you to synchronize your calendar, contacts, or notes with various  
calendar and address book applications on a compatible computer or on the  
internet. The synchronization application uses SyncML technology for  
synchronization.  
Select Menu > Settings > Connectivity > Sync.  
Create a new synchronization profile  
1. If no profiles have been defined, the phone asks you if you want to create a  
new profile. Select Yes.  
To create a new profile in addition to existing ones, select Options > New sync  
profile. Choose whether you want to use the default setting values or copy the  
values from an existing profile to be used as the basis for the new profile.  
2. Define the Applications to be synchronized.  
Select an application, and edit the synchronization settings:  
Include in sync—to enable or disable the synchronization  
Remote database—the name of the used remote database  
Synchronisation type—Select Both ways for synchronization of the data on  
your phone and the remote database, To phone only for the synchronization of  
the data on your phone only, or To server only for the synchronization of the  
data on the remote database only.  
3. Define the Connection settings :  
Server version, Server ID, Data bearer, Host address, Port, User name, and  
Password—Contact your service provider or system administrator for the  
correct settings.  
Access point—Only visible if Internet is selected as Data bearer. Select an  
access point you want to use for the data connection.  
Allow sync requests > Yes—to allow that the server starts the synchronization  
Accept all sync requests > No—to require a confirmation before the server  
starts the synchronization  
91  
Network authentication—Only visible if Internet is selected as Data bearer. To  
use HTTPS authentication, select Yes, and enter user name and password in  
Network user name and Network password.  
Synchronize data  
In the main view, scroll to a profile, and select Options > Synchronise. The status  
of the synchronization is shown.  
After synchronization is complete, select Options > View log to open a log file  
showing the synchronization status (Complete or Incomplete) and how many  
calendar or contact entries have been added, updated, deleted, or discarded (not  
synchronized) in the phone or on the server.  
Infrared  
Use infrared to connect two devices and transfer data between them. With  
infrared, you can transfer data such as business cards, calendar notes, and media  
files with a compatible device.  
Do not point the infrared (IR) beam at anyone's eye or allow it to interfere with other IR  
devices. This device is a Class 1 laser product.  
Send and receive data  
1. Ensure that the infrared ports of the devices face each other. The positioning of  
the devices is more important than angle or distance.  
2. To turn on infrared on your device, select Menu > Settings > Connectivity >  
Infrared. Turn on infrared on the other device. Wait a few seconds until an  
infrared connection is established.  
3. To send, locate the desired file in an application or the file manager, and select  
Options > Send > Via infrared.  
If data transfer is not started soon after the activation of the infrared port, the  
connection is cancelled and must be started again.  
All items received through infrared are placed in the Inbox folder in Messaging.  
Modem  
Before you can use your phone as a modem:  
• Acquire the appropriate data communications software for your computer.  
92  
• Subscribe to the appropriate network services from your service provider or  
internet service provider.  
• Install the appropriate drivers on your computer.  
Select Menu > Settings > Connectivity > Modem.  
To connect the phone to a compatible computer using infrared, press the  
scroll key. Make sure the infrared ports of the phone and computer are directly  
facing each other with no obstacles between them.  
To connect your phone to a computer using Bluetooth wireless technology,  
initiate the connection from the computer. To activate Bluetooth in your phone,  
select Menu > Connectivity > Bluetooth > Bluetooth > On.  
If you use a cable to connect your phone to a computer, initiate the connection  
from the computer.  
Note that you may not be able to use some of the other communication features  
when the phone is used as a modem.  
USB data cable  
You can use the USB data cable to transfer data between the phone and a  
compatible PC. You can also use the USB data cable with Nokia PC Suite.  
Select Menu > Settings > Connectivity > USB. To select the default USB  
connection mode, select USB mode and the desired mode. To have the device ask  
the purpose of the connection each time the cable is connected, select Ask on  
connection > Yes.  
To use the phone with Nokia PC Suite, select PC Suite. To synchronize media files,  
such as music, with a compatible version of Windows Media Player, select Media  
player. To access files on the inserted memory card as a removable drive, select  
Data transfer.  
After transferring data, ensure that it is safe to unplug the USB data cable from  
the PC.  
Data transfer  
With data transfer you can copy or synchronize contacts, calendar entries, and  
possibly other data, such as video clips and images, from a compatible phone  
using a Bluetooth or infrared connection. When both Bluetooth and infrared are  
available on both devices, it is preferable to use Bluetooth.  
93  
Depending on the other phone, synchronization may not be possible and data can  
be copied only once.  
To transfer or synchronize data, do the following:  
1. When using infrared, place the devices so that the infrared ports face each  
other, and activate infrared on both devices.  
Select Menu > Settings > Connectivity > Transfer. If you have not used  
Transfer before, information about the application is displayed. Select  
Continue to start transferring data.  
If you have used Transfer, select Transfer data.  
2. Select whether to use Bluetooth or infrared for transferring the data. When  
using Bluetooth, the phones need to be paired in order to transfer data.  
Depending on the type of the other phone, an application may be sent and  
installed on the other phone to enable the data transfer. Follow the  
instructions.  
3. Select what content you want to be transferred to your phone.  
4. Content is transferred to your phone. The transfer time depends on the amount  
of data. You can stop the transfer and continue later.  
16. Data manager  
Application manager  
You can install two types of applications and software to your phone:  
J2METM applications based on JavaTM technology with the extension .jad  
or .jar. PersonalJavaTM applications cannot be installed on your phone.  
Other applications and software suitable for the Symbian operating  
system. The installation files have the .sis extension. Only install software  
specifically designed for your phone.  
Installation files may be transferred to your phone from a compatible computer,  
downloaded during browsing, or sent to you in a multimedia message, as an  
e-mail attachment or by using Bluetooth. You can use Nokia Application Installer  
in Nokia PC Suite to install an application to your phone or a memory card.  
To open App. manager, select Menu > Settings > Data mgr. > App. mgr..  
94  
Install an application  
Important: Only install and use applications and other software from trusted  
sources, such as applications that are Symbian Signed or have passed the Java  
VerifiedTM testing.  
Before installation, in App. manager, scroll to the installation file, and select  
Options > View details to view information such as the application type, version  
number, and the supplier or manufacturer of the application.  
The .jar file is required for installing Java applications. If it is missing, the phone  
may ask you to download it.  
To install an application or software package:  
1. Scroll to an installation file. Applications on the memory card are indicated  
with  
.
2. Select Options > Install.  
Alternatively, search the phone memory or the memory card, select the  
application, and press the scroll key to start the installation.  
During the installation, the phone shows information about the progress of the  
installation. If you are installing an application without a digital signature or  
certification, the phone displays a warning. Continue installation only if you  
are sure of the origins and contents of the application.  
To view extra information about the application, scroll to it, and select Options >  
Go to web address. This option may not be available with all applications.  
To see what software packages have been installed or removed and when, select  
Options > View log.  
Remove an application  
In the App. manager main view, scroll to the software package, and select  
Options > Remove.  
Application manager settings  
In App. manager, select Options > Settings and from the following settings:  
Software installation—to select if you want to allow installation of all Symbian  
applications (All) or only signed applications (Signed only)  
Online certificate check—to select if you want App. manager to check the online  
certificates for an application before installing it  
95  
Default web address—default address used when checking online certificates  
Java applications may attempt to, for example, establish a data connection or  
send a message. To edit the permissions of an installed Java application and define  
which access point the application will use, in the main view, scroll to the  
application, and select Options > Open.  
File manager  
In the file manager, you can browse, open, and manage files and folders in the  
phone memory or on the memory card.  
To see a list of the folders in the phone memory, select Menu > Settings > Data  
mgr. > File mgr.. Scroll right to see the folders on the memory card.  
View memory consumption  
Scroll either right or left to view the phone memory or the memory card contents.  
To check memory consumption of the current memory, select Options > Memory  
details. The phone calculates the approximate amount of free memory for storing  
data and installing new applications.  
In the memory views, you can view the memory consumption of the different  
applications or file types. If the phone memory is getting low, remove some files,  
or move them to the memory card.  
Device manager  
You may receive server profiles and configuration settings from your service  
provider or company information management department.  
To open the device manager, select Menu > Settings > Data mgr. > Device mgr.. If  
you have no server profiles defined, the phone asks whether you want to define  
one.  
To connect to a server and receive configuration settings for your phone, scroll to  
the server profile, and select Options > Start configuration.  
To edit a server profile, select Options > Edit profile and from the following  
settings:  
Allow configuration—To receive configuration settings from the server, select Yes.  
Auto-accept all requests —If you want the phone to ask for confirmation before  
accepting a configuration from the server, select No.  
96  
Contact your service provider, or company information management department  
for the other server profile settings.  
Memory card  
Keep all memory cards out of the reach of small children.  
Select Menu > Settings > Data mgr. > Memory.  
For details on inserting a memory card into the phone, see “Get started,” p. 10. You  
can use it to store your multimedia files such as video clips, music tracks, and  
sound files, photos, and messaging data, and to back up information from phone  
memory.  
Format the memory card  
When a memory card is formatted, all data on the card is permanently lost. Some  
memory cards are supplied preformatted and others require formatting.  
1. Select Options > Format memory card.  
2. Select Yes to confirm.  
3. When formatting is complete, enter a name for the memory card.  
Back up and restore information  
To back up information from phone memory to the memory card, select Options >  
Back up phone memory.  
To restore information from the memory card to the phone memory, select  
Options > Restore from card.  
You can only back up the phone memory and restore it to the same phone.  
Lock the memory card  
To set a password to help prevent unauthorized use, select Options > Set  
password. You are asked to enter and confirm your password. The password can be  
up to eight characters long.  
Unlock a memory card  
If you insert another password-protected memory card into your phone, you are  
prompted to enter the password of the card. To unlock the card, select Options >  
Unlock memory card.  
97  
Check memory consumption  
To check the memory consumption and the amount of memory available on your  
memory card, select Options > Memory details.  
Activation keys  
Digital rights management  
Content owners may use different types of digital rights management (DRM) technologies  
to protect their intellectual property, including copyrights. This device uses various types of  
DRM software to access DRM-protected content. With this device you can access content  
protected with WMDRM 10, OMA DRM 2.0 and OMA DRM 1.0. If certain DRM software fails  
to protect the content, content owners may ask that such DRM software's ability to access  
new DRM-protected content be revoked. Revocation may also prevent renewal of such  
DRM-protected content already in your device. Revocation of such DRM software does not  
affect the use of content protected with other types of DRM or the use of non-DRM-  
protected content.  
Digital rights management (DRM) protected content comes with an associated activation  
key that defines your rights to use the content.  
If your device has OMA DRM protected content, to back up both the activation keys and the  
content, use the backup feature of Nokia PC Suite. Other transfer methods may not transfer  
the activation keys which need to be restored with the content for you to be able to  
continue the use of OMA DRM protected content after the device memory is formatted. You  
may also need to restore the activation keys in case the files on your device get corrupted.  
If your device has WMDRM protected content, both the activation keys and the content will  
be lost if the device memory is formatted. You may also lose the activation keys and the  
content in case the files on your device get corrupted. Losing the activation keys or the  
content may limit your ability to use the same content on your device again. For more  
information, contact your service provider.  
Some activation keys may be connected to a specific SIM card, and the protected content  
can be accessed only if the SIM card is inserted in the device.  
Select Menu > Settings > Data mgr. > Actv. keys to view the digital rights  
activation keys saved in your phone.  
To view valid keys ( ) that are connected to one or more media files, select Valid  
keys. Group keys, which contain several keys, are indicated with  
. To view the  
keys contained in the group key, select the group key.  
To view invalid keys ( ) with which the time period for using the file is exceeded,  
select Invalid keys. To buy more usage time or extend the usage period for a media  
file, scroll to a key, and select Options > Get activation key. It may not be possible  
98  
to update activation keys if web service message reception is disabled. See  
“Service message settings,” p. 39.  
To view activation keys that are not in use, select Not in use. Unused activation  
keys have no media files connected to them.  
To view detailed information such as the validity status and the ability to send the  
file, scroll to an activation key, and select it.  
17. Battery information  
Charging and discharging  
Your device is powered by a rechargeable battery. The battery can be charged and  
discharged hundreds of times, but it will eventually wear out. When the talk and standby  
times are noticeably shorter than normal, replace the battery. Use only Nokia approved  
batteries, and recharge your battery only with Nokia approved chargers designated for this  
device.  
The full performance of a new battery is achieved only after two or three complete charge  
and discharge cycles.  
If a replacement battery is being used for the first time or if the battery has not been used  
for a prolonged period, it may be necessary to connect the charger, then disconnect and  
reconnect it to begin charging the battery.  
Unplug the charger from the electrical plug and the device when not in use. Do not leave a  
fully charged battery connected to a charger, since overcharging may shorten its lifetime. If  
left unused, a fully charged battery will lose its charge over time.  
If the battery is completely discharged, it may take several minutes before the charging  
indicator appears on the display or before any calls can be made.  
Use the battery only for its intended purpose. Never use any charger or battery that is  
damaged.  
Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic  
object such as a coin, clip, or pen causes direct connection of the positive (+) and  
negative (—) terminals of the battery. (These look like metal strips on the battery.) This might  
happen, for example, when you carry a spare battery in your pocket or purse. Short-  
circuiting the terminals may damage the battery or the connecting object.  
Leaving the battery in hot or cold places, such as in a closed car in summer or winter  
conditions, will reduce the capacity and lifetime of the battery. Always try to keep the  
battery between 15°C and 25°C (59°F and 77°F). A device with a hot or cold battery may not  
99  
work temporarily, even when the battery is fully charged. Battery performance is particularly  
limited in temperatures well below freezing.  
Do not dispose of batteries in a fire as they may explode. Batteries may also explode if  
damaged. Dispose of batteries according to local regulations. Please recycle when possible.  
Do not dispose as household waste.  
Do not dismantle or shred cells or batteries. In the event of a battery leak, do not allow the  
liquid to come in contact with the skin or eyes. In the event of such a leak, flush your skin or  
eyes immediately with water, or seek medical help.  
Nokia battery authentication guidelines  
Always use original Nokia batteries for your safety. To check that you are getting an original  
Nokia battery, purchase it from an authorized Nokia dealer, look for the Nokia Original  
Enhancements logo on the packaging, and inspect the hologram label using the following  
steps:  
Successful completion of the four steps is not a total assurance of the authenticity of the  
battery. If you have any reason to believe that your battery is not an authentic, original  
Nokia battery, you should refrain from using it, and take it to the nearest authorized Nokia  
service point or dealer for assistance. Your authorized Nokia service point or dealer will  
inspect the battery for authenticity. If authenticity cannot be verified, return the battery to  
the place of purchase.  
Authenticate hologram  
1. When looking at the hologram on the label, you should see the  
Nokia connecting hands symbol from one angle and the Nokia  
Original Enhancements logo when looking from another angle.  
2. When you angle the hologram left, right, down, and up, you  
should see 1, 2, 3, and 4 dots on each side respectively.  
100  
3. Scratch the side of the label to reveal a 20-digit code, for  
example, 12345678919876543210. Turn the battery so that the  
numbers are facing upwards. The 20-digit code reads starting  
from the number at the top row followed by the bottom row.  
4. Confirm that the 20-digit code is valid by following the  
instructions at www.nokia.com/batterycheck.  
To create a text message, enter the 20-digit code, for example,  
12345678919876543210, and send to +44 7786 200276.  
National and international operator charges will apply.  
You should receive a message indicating whether the code can be  
authenticated.  
What if your battery is not authentic?  
If you cannot confirm that your Nokia battery with the hologram on the label is an authentic  
Nokia battery, please do not use the battery. Take it to the nearest authorized Nokia service  
point or dealer for assistance. The use of a battery that is not approved by the manufacturer  
may be dangerous and may result in poor performance and damage to your device and its  
enhancements. It may also invalidate any approval or warranty applying to the device.  
To find out more about original Nokia batteries, visit www.nokia.com/battery.  
18. Enhancements  
Practical rules about accessories and enhancements  
Keep all accessories and enhancements out of the reach of small children.  
When you disconnect the power cord of any accessory or enhancement, grasp and pull  
the plug, not the cord.  
Check regularly that enhancements installed in a vehicle are mounted and are operating  
properly.  
Installation of any complex car enhancements must be made by qualified personnel only.  
Care and maintenance  
Your device is a product of superior design and craftsmanship and should be treated with  
care. The following suggestions will help you protect your warranty coverage.  
101  
Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can  
contain minerals that will corrode electronic circuits. If your device does get wet, remove  
the battery, and allow the device to dry completely before replacing it.  
Do not use or store the device in dusty, dirty areas. Its moving parts and electronic  
components can be damaged.  
Do not store the device in hot areas. High temperatures can shorten the life of electronic  
devices, damage batteries, and warp or melt certain plastics.  
Do not store the device in cold areas. When the device returns to its normal temperature,  
moisture can form inside the device and damage electronic circuit boards.  
Do not attempt to open the device other than as instructed in this guide.  
Do not drop, knock, or shake the device. Rough handling can break internal circuit boards  
and fine mechanics.  
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.  
Do not paint the device. Paint can clog the moving parts and prevent proper operation.  
Use a soft, clean, dry cloth to clean any lenses, such as camera, proximity sensor, and  
light sensor lenses.  
Use only the supplied or an approved replacement antenna. Unauthorized antennas,  
modifications, or attachments could damage the device and may violate regulations  
governing radio devices.  
Use chargers indoors.  
Always create a backup of data you want to keep, such as contacts and calendar notes.  
To reset the device from time to time for optimum performance, power off the device  
and remove the battery.  
These suggestions apply equally to your device, battery, charger, or any enhancement. If any  
device is not working properly, take it to the nearest authorized service facility for service.  
Disposal  
The crossed-out wheeled-bin symbol on your product, literature, or packaging  
reminds you that in the European Union all electrical and electronic products,  
batteries, and accumulators must be taken to separate collection at the end of their  
working life. Do not dispose of these products as unsorted municipal waste.  
Return the products to collection to prevent possible harm to the environment or  
human health from uncontrolled waste disposal and to promote the sustainable  
reuse of material resources. Collection information is available from the product  
retailer, local waste authorities, national producer responsibility organizations, or  
your local Nokia representative. For more information, see product Eco-Declaration  
or country-specific information at www.nokia.com.  
102  
Additional safety information  
Small children  
Your device and its enhancements may contain small parts. Keep them out of the reach of  
small children.  
Operating environment  
This device meets RF exposure guidelines when used either in the normal use position  
against the ear or when positioned at least 2.2 centimeters (7/8 inches) away from the body.  
When a carry case, belt clip, or holder is used for body-worn operation, it should not contain  
metal and should position the device the above-stated distance from your body.To transmit  
data files or messages, this device requires a quality connection to the network. In some  
cases, transmission of data files or messages may be delayed until such a connection is  
available. Ensure the above separation distance instructions are followed until the  
transmission is completed.  
Parts of the device are magnetic. Metallic materials may be attracted to the device. Do not  
place credit cards or other magnetic storage media near the device, because information  
stored on them may be erased.  
Medical devices  
Operation of any radio transmitting equipment, including wireless phones, may interfere  
with the functionality of inadequately protected medical devices. Consult a physician or the  
manufacturer of the medical device to determine if they are adequately shielded from  
external RF energy or if you have any questions. Switch off your device in health care  
facilities when any regulations posted in these areas instruct you to do so. Hospitals or  
health care facilities may be using equipment that could be sensitive to external RF energy.  
Implanted medical devices  
Manufacturers of medical devices recommend that a minimum separation of  
15.3 centimeters (6 inches) should be maintained between a wireless device and an  
implanted medical device, such as a pacemaker or implanted cardioverter defibrillator, to  
avoid potential interference with the medical device. Persons who have such devices should:  
Always keep the wireless device more than 15.3 centimeters (6 inches) from the medical  
device when the wireless device is turned on.  
Not carry the wireless device in a breast pocket.  
Hold the wireless device to the ear opposite the medical device to minimize the potential  
for interference.  
Turn the wireless device off immediately if there is any reason to suspect that  
interference is taking place.  
103  
Read and follow the directions from the manufacturer of their implanted medical device.  
If you have any questions about using your wireless device with an implanted medical  
device, consult your health care provider.  
Hearing aids  
Some digital wireless devices may interfere with some hearing aids. If interference occurs,  
consult your service provider.  
Vehicles  
RF signals may affect improperly installed or inadequately shielded electronic systems in  
motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock)  
braking systems, electronic speed control systems, and air bag systems. For more  
information, check with the manufacturer, or its representative, of your vehicle or any  
equipment that has been added.  
Only qualified personnel should service the device or install the device in a vehicle. Faulty  
installation or service may be dangerous and may invalidate any warranty that may apply to  
the device. Check regularly that all wireless device equipment in your vehicle is mounted  
and operating properly. Do not store or carry flammable liquids, gases, or explosive materials  
in the same compartment as the device, its parts, or enhancements. For vehicles equipped  
with an air bag, remember that air bags inflate with great force. Do not place objects,  
including installed or portable wireless equipment in the area over the air bag or in the air  
bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag  
inflates, serious injury could result.  
Using your device while flying in aircraft is prohibited. Switch off your device before  
boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to the  
operation of the aircraft, disrupt the wireless telephone network, and may be illegal.  
Potentially explosive environments  
Switch off your device when in any area with a potentially explosive atmosphere, and obey  
all signs and instructions. Potentially explosive atmospheres include areas where you would  
normally be advised to turn off your vehicle engine. Sparks in such areas could cause an  
explosion or fire resulting in bodily injury or even death. Switch off the device at refueling  
points such as near gas pumps at service stations. Observe restrictions on the use of radio  
equipment in fuel depots, storage, and distribution areas; chemical plants; or where blasting  
operations are in progress. Areas with a potentially explosive atmosphere are often, but not  
always, clearly marked. They include below deck on boats, chemical transfer or storage  
facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas  
where the air contains chemicals or particles such as grain, dust, or metal powders.  
104  
Emergency calls  
Important: Wireless phones, including this device, operate using radio signals,  
wireless networks, landline networks, and user-programmed functions. Because of  
this, connections in all conditions cannot be guaranteed. You should never rely  
solely on any wireless device for essential communications like medical  
emergencies.  
To make an emergency call:  
1. If the device is not on, switch it on. Check for adequate signal strength.  
Some networks may require that a valid SIM card is properly inserted in the device.  
2. Press the end key as many times as needed to clear the display and ready the device for  
calls.  
3. Enter the official emergency number for your present location. Emergency numbers vary  
by location.  
4. Press the call key.  
If certain features are in use, you may first need to turn those features off before you can  
make an emergency call. If the device is in the offline profile mode, you may need to change  
the profile to activate the phone function before you can make an emergency call. Consult  
this guide or your service provider for more information.  
When making an emergency call, give all the necessary information as accurately as  
possible. Your wireless device may be the only means of communication at the scene of an  
accident. Do not end the call until given permission to do so.  
Certification information (SAR)  
THIS MOBILE DEVICE MEETS GUIDELINES FOR EXPOSURE TO RADIO WAVES.  
Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits  
for exposure to radio waves recommended by international guidelines. These guidelines  
were developed by the independent scientific organization ICNIRP and include safety  
margins designed to assure the protection of all persons, regardless of age and health.  
The exposure guidelines for mobile devices employ a unit of measurement known as the  
Specific Absorption Rate or SAR. The SAR limit stated in the ICNIRP guidelines is 2.0 watts/  
kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR are conducted using  
standard operating positions with the device transmitting at its highest certified power level  
in all tested frequency bands. The actual SAR level of an operating device can be below the  
maximum value because the device is designed to use only the power required to reach the  
network. That amount changes depending on a number of factors such as how close you are  
to a network base station. The highest SAR value under the ICNIRP guidelines for use of the  
device at the ear is 1.24 W/kg.  
105  
Use of device accessories and enhancements may result in different SAR values. SAR values  
may vary depending on national reporting and testing requirements and the network band.  
Additional SAR information may be provided under product information at www.nokia.com.  
106  
Index  
conference call 23  
diverting 77  
NUMERICS  
3-D tones 59  
ending 22  
international 21  
making 21  
A
options during a call 24  
rejecting 23  
access codes  
barring password 9  
change 73  
rejecting with SMS 24  
speed dial 22, 42  
swapping 24  
lock code 8, 13  
module PIN 9  
PIN 8, 13  
voice dial 22  
voice mailbox 22  
waiting 24  
PIN2 8  
PUK 9  
camera 52  
PUK2 9  
camera mode 15  
certificates 74  
signing PIN 9  
UPIN 8  
clock 65  
UPUK 9  
connection manager 86  
connectivity 84  
access points 78  
activation keys 98  
active standby 16  
alarm clock. See clock.  
application manager 94  
applications 94  
contacts 40  
converter 68  
copyright protection. See activation keys.  
D
data cable 93  
data connection indicators 17  
data transfer 93  
B
battery  
charging 12  
device manager 96  
digital rights management. See activation  
keys.  
Bluetooth  
connection settings 84  
disconnecting 86  
paired devices 86  
receiving data 86  
sending data 85  
bookmarks 61  
browser. See web.  
downloading 63  
E
editing videos 44  
e-mail  
mailbox 34  
settings 33  
C
e-mail messages  
deleting 35  
cache 64  
calculator 68  
calendar 66  
retrieving 34  
enhancements 73  
call register. See log.  
callback requests 88, 89  
calls  
F
answering 23  
barring 77  
file manager 96  
Flash Player 57  
107  
functional modes 15  
organizing 34  
outbox 31, 35  
receiving 33  
G
sending 31  
gallery 42  
service commands 36  
service messages 34  
SIM messages 36  
special message types 33  
writing 31  
transferring videos 45  
GPS data 70  
H
mobile browser. See web.  
mobile search 60  
modem 92  
help 20  
I
movies, muvees  
custom muvees 54  
quick muvees 54  
music mode 16  
IM. See instant messaging.  
indicators 17  
infrared 92  
music player  
instant messaging  
connecting 81  
contacts 83  
downloading music 47  
music shop 47  
playlists 47  
conversation 82  
groups 82, 83  
settings 81  
transferring music 48  
music.See music player.  
N
K
network 78  
notes 67  
keyguard. See keypad lock.  
keypad lock 20  
Ö
L
one-touch dial. See speed dial.  
landmarks 70  
listening to music 46  
log 28  
P
phone mode 15  
M
phonebook. See contacts.  
profiles 58  
media player. See RealPlayer.  
memory card 97  
memory consumption  
phone memory 96  
menu 19  
PTT. See push to talk.  
push to talk 8791  
R
message settings  
cell broadcast 39  
e-mail 38  
RealPlayer 57  
recorder 56  
multimedia settings 37  
other settings 40  
service messages 39  
text messages 36  
messages  
S
services. See web.  
settings  
connection 78  
data call 79  
audio 32  
cell broadcast 36  
listening to 40  
multimedia objects 33  
date 73  
enhancements 73  
packet data 79  
108  
phone 71  
U
phone language 72  
predictive text input 72  
security 73  
USB. See data cable.  
Setting wizard 80  
speech 80  
V
video call 24, 25  
video call mode 16  
video view mode 16  
videos  
time 73  
writing language 72  
SIM card  
using phone without a SIM card 17  
songs  
transferring 48  
speed dial  
transferring 45  
Visual Radio 49  
voice commands 70  
voice dialing 22  
voice mailbox 71  
voice recorder. See recorder.  
volume 20  
assigning a number 41, 71  
calling 22  
changing a number 71  
deleting a number 71  
standby mode 16  
W
synchronization 91  
web  
blogs 63  
T
bookmarks 61  
text input 72  
browser settings 64  
browsing 62  
copying text 30  
deleting text 30  
predictive 29  
connecting 61  
connection security 61  
disconnecting 64  
feeds 63  
themes 58  
to-do 67  
transferring music 48  
transferring videos 45  
tutorial 19  
saving a page 63  
settings 60  
viewing a saved page 63  
writing text. See text input.  
109  

Sony SAITE1300 F User Manual
Siemens CXT70 User Manual
Seagate SAVVIO ST9300405SS User Manual
Seagate Momentus 72001 PATA ST96023A User Manual
Seagate BlackArmor WS 110 User Manual
Seagate BARRACUDA ST3250820AS User Manual
Samsung GT 18000 User Manual
Roberts Radio CR9935 User Manual
PYLE Audio DISC CD CHANGE User Manual
Panasonic EB X300 User Manual