Nokia PM 6225 User Manual

PCS Vision Picture Phone  
PM-6225 by Nokia  
User’s Guide  
9311416  
3B.PCS VisionSM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140  
3C.PCS Voice CommandSM . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176  
Welcome to Sprint  
Sprint has the most complete, all-digital wireless network in the  
nation. Depend on it. We are committed to bringing you the best  
wireless technology available. With Sprint, you get the most  
complete, all-digital wireless network in the nation so all your  
services work the same wherever you go on the network. We built  
our network right from the start, so no matter where you are on  
the enhanced Sprint Nationwide PCS Network, all your services –  
whether it’s Voicemail, Caller ID, email, or Picture Mail – will  
work the same.  
This guide will familiarize you with our technology and your new  
PCS Vision Picture Phone through simple, easy-to-follow  
instructions. If you have already reviewed the Start Here to Activate  
guide that was packaged with your new phone, then you're ready  
to explore the advanced features outlined in this guide.  
If you have not read your Start Here to Activate guide, go to  
Section One – Getting Started. This section provides all the  
information you need to quickly unlock your phone, set up your  
voicemail, and much more. It also contains information on how to  
contact Sprint if you have any questions about your service, wish  
to check your account balance, or want to purchase additional  
products or services.  
Sprint is different. All your services work the same wherever you  
go on the most complete, all-digital wireless network in the nation.  
Welcome and thank you for choosing Sprint.  
i
   
Introduction  
This User’s Guide introduces you to PCS Service and all the  
features of your new phone. It’s divided into four sections:  
Section 1: Getting Started  
Section 2: Understanding Your PCS Vision Picture Phone  
Section 3: Using PCS Service Features  
Section 4: Safety and Warranty Information  
Throughout this guide, you'll find tips that highlight special  
shortcuts and timely reminders to help you make the most of your  
new phone and service. The Table of Contents and Index will also  
help you quickly locate specific information.  
You'll get the most out of your phone if you read each section.  
However, if you'd like to get right to a specific feature, simply  
locate that section in the Table of Contents and click on the page  
number to go directly to that page. Follow the instructions in that  
section, and you'll be ready to use your phone in no time.  
You can view this guide online or print it to keep it on hand. If you're  
viewing it online, simply click on a topic in the Table of Contents or Index  
or on any page reference. The PDF will automatically display the  
appropriate page.  
Note:  
Note:  
The phone must be turned on to use the phone’s features. Do not turn on  
the phone when the use of a wireless phone is prohibited or when it may  
cause interference or danger.  
ii  
   
Section 1  
Getting Started  
 
Section 1A  
Setting Up Service  
In This Section  
Setting up service on your new PCS Vision Phone is quick and easy.  
This section walks you through the necessary steps to set up your  
phone, unlock your phone, set up your voicemail, establish passwords,  
and contact Sprint for assistance with your PCS Service.  
Section 1A: Setting Up Service  
2
 
Getting Started With PCS Service  
Determining if Your Phone is Already Activated  
If you received your phone in the mail or purchased it at a Sprint  
Store, it probably has already been activated. All you need to do is  
unlock your phone.  
If your phone is not activated, please refer to the Start Here Guide  
included with your phone.  
Unlocking Your Phone  
To unlock your phone, follow these easy steps:  
1. Press and hold the power button  
located at the top of your phone for two  
seconds to turn on the phone.  
2. Press the Menu softkey.  
To select a softkey, press the selection key directly below the softkey  
text that appears at the bottom left and bottom right of your phone’s  
display screen. Softkey actions change according to the screen you’re  
viewing and will not appear if there is no corresponding action available.  
Note:  
3. Enter your lock code. (For security purposes, the code is not  
visible as you type.)  
If you can’t recall your lock code, try using the last four digits of either  
your Social Security number or PCS Phone Number or try 0000. If none  
of these work, call PCS Customer Solutions at 1-888-211-4PCS (4727).  
Tip:  
4. Press OK.  
Section 1A: Setting Up Service  
3
     
Setting Up Your Voicemail  
All unanswered calls to your PCS Vision Phone are automatically  
transferred to your voicemail, even if your phone is in use or turned off.  
Therefore, you will want to set up your voicemail and personal greeting  
as soon as your PCS Vision Phone is activated.  
To set up your voicemail:  
1. Press and hold  
for two seconds.  
2. Follow the system prompts to:  
Create your pass code  
Record your greeting  
Record your name announcement  
Choose whether or not to activate One-Touch Message  
Access (a feature that lets you access messages simply by  
pressing and holding a single key, bypassing the need for  
you to enter your pass code)  
The voicemail setup process may vary in certain Affiliate areas.  
Note:  
For more information about using your voicemail, see “Using  
Section 1A: Setting Up Service  
4
   
PCS Account Passwords  
As a PCS customer, you enjoy unlimited access to your personal  
account information, your voicemail account, and your PCS Vision  
account. To ensure that no one else has access to your information,  
you will need to create passwords to protect your privacy.  
Account Password  
If you are the account owner, you'll have an account password to  
sign on to www.sprintpcs.com and to use when calling PCS Customer  
Solutions. Your default account password is the last four digits of  
your Social Security number. If you are not the account owner (if  
someone else pays for your PCS Service), you can get a sub-account  
password at www.sprintpcs.com.  
Voicemail Password  
You'll create your voicemail password (or pass code) when you set  
up your voicemail. (See “Setting Up Your Voicemail” on page 4 for  
more information on your voicemail password.)  
PCS Vision Password  
If you have a PCS Vision Phone, you can set up a PCS Vision  
Password. This optional password may be used to authorize  
purchase of Premium Services content and to protect personal  
information on multi-phone accounts.  
For more information or to change your passwords, sign on to  
www.sprintpcs.com or call PCS Customer Solutions at  
1-888-211-4PCS (4727).  
Section 1A: Setting Up Service  
5
   
Getting Help  
Visit Our Website  
You can get up-to-date information on PCS Services and Options by  
signing onto our Website at www.sprintpcs.com.  
When you visit us online, you can  
Review coverage maps  
Learn how to use voicemail  
Access your account information  
Purchase accessories  
Add additional options to your service plan  
Check out frequently asked questions  
And more  
SM  
Reaching PCS Customer Solutions  
You can reach PCS Customer Solutions many different ways:  
Dial  
on your PCS Phone  
Sign on to your account at www.sprintpcs.com  
Call us toll-free at 1-888-211-4727 (Consumer customers),  
SM  
1-877-CLEARPY (253-2779) (PCS Clear Pay customers), or  
1-888-788-4727 (Business customers)  
Write to us at PCS Customer Solutions, P.O. Box 8077,  
London, KY 40742  
Receiving Automated Invoicing Information  
For your convenience, your phone gives you access to invoicing  
information on your PCS Account. This information includes  
balance due, payment received, invoicing cycle, and the number of  
minutes used since your last invoicing cycle. (Normal airtime usage  
will apply.)  
To access automated invoicing information:  
Press  
.
This service may not be available in all Affiliate areas.  
Note:  
Section 1A: Setting Up Service  
6
     
PCS Directory Assistance  
You have access to a variety of services and information through  
PCS Directory Assistance, including residential, business, and  
government listings; assistance with local or long-distance calls;  
movie listings; and hotel, restaurant, shopping, and major local  
event information. There is a per-call charge and you will be billed  
for airtime.  
To call PCS Directory Assistance:  
Press  
.
PCS Operator Services  
PCS Operator Services provides assistance when placing collect  
calls or when placing calls billed to a local telephone calling card  
or third party.  
To access PCS Operator Services:  
Press  
.
For more information or to see the latest in products and services,  
visit us online at www.sprintpcs.com.  
PCS Operator Services may not be available in all Affiliate areas.  
Note:  
Section 1A: Setting Up Service  
7
   
Section 2  
Your PCS Vision  
Picture Phone  
 
Section 2A  
Your PCS Vision Picture Phone:  
The Basics  
In This Section  
Your PCS Vision Picture Phone is packed with features that simplify your  
life and expand your ability to stay connected to the people and  
information that are important to you. This section will guide you  
through the basic functions and calling features of your phone.  
Section 2A: Your PCS Vision Phone - The Basics  
9
 
Front View of Your PCS Vision Picture Phone  
16. Camera  
(on back side)  
17. Earpiece  
1. Infrared  
(IR) Port  
15. Power Key  
14. Universal  
Headset  
Jack  
2. Speaker  
3. Volume  
Control  
13. Display  
Screen  
4. Signal  
Strength  
Indicator  
12. Battery  
Strength  
Indicator  
5. Selection  
Key  
5. Selection  
Key  
11. End Call  
Key  
6. Talk Key  
10. Navigation  
Key  
7. Charger Jack  
9. Microphone  
8. Pop-Port  
Connector  
Section 2A: Your PCS Vision Phone - The Basics  
10  
 
Key Functions  
1. Infrared (IR) Port allows data transfer with other  
compatible devices.  
2. Speaker lets you hear phone ring tones.  
3. Volume Control lets you change the loudness of the caller.  
4. Signal Strength Indicator indicates the signal strength  
5. Selection Key lets you select softkey actions or menu items.  
6. Talk Key dials outgoing and answers incoming calls.  
7. Charger Jack connects the phone to the battery charger.  
TM  
8. Pop-Port Connector provides connection to your personal  
computer or laptop computer and car kit, as well as to  
other accessories.  
9. Microphone transmits your voice.  
10. Navigation Key scrolls through menus and displays the next or  
previous menu option. (Also acts as a shortcut key for web access,  
messages, downloads and more.). From the standby mode:  
Press  
Press  
Press  
Press  
to use the camera.  
to view your contacts list.  
to access the mobile web.  
to create a message.  
11. End Call Key ends calls and clears text from the  
display screen.  
12. Battery Strength Indicator indicates the current  
battery strength.  
13. Display Screen displays status icons and menu items.  
14. Universal Headset Jack provides a connection for a universal  
2.5-mm headset.  
15. Power Key lets you power the phone on or off.  
16. Camera lets you capture events when they happen.  
17. Earpiece lets you hear the caller and automated prompts.  
Section 2A: Your PCS Vision Phone - The Basics  
11  
   
Viewing the Display Screen  
Your phone’s display screen provides a wealth of information about  
your phone’s status and options. This list identifies the symbols  
you’ll see on your phone’s display screen:  
shows your current signal strength. (The more lines you  
have, the stronger your signal.)  
No service available means your phone cannot find a signal.  
tells you a call is in progress.  
indicates you are “roaming” off the Sprint Nationwide  
PCS Network. (If you are roaming on an analog system,  
your phone’s display will show the roaming icon and an  
“Analog Roam” text alert.)  
indicates you have new text messages.  
indicates you have voicemail messages. Press and  
hold  
to call your voicemail box.  
the ringing tones or warning tones are silenced.  
vibrating alert is activated.  
keyguard is activated.  
the alarm is activated.  
a headset accessory is connected.  
a hands-free accessory is connected.  
a loopset accessory is connected.  
predictive text mode is on.  
predictive text mode is off.  
location info sharing (GPS) is set to share your location  
with the network only during emergency calls.  
location info sharing (GPS) is set to share your location with  
the network whenever the phone is on and activated.  
the stopwatch is running.  
Section 2A: Your PCS Vision Phone - The Basics  
12  
   
the countdown timer is running.  
an IR (infrared) connection is active.  
the PCS Vision connection is active.  
the PCS Vision connection is dormant.  
the camera is active with the self-timer off.  
the camera is active with the self-timer on.  
the camera image resolution is set to basic.  
the camera image resolution is set to normal.  
the camera image resolution is set to high.  
a TTY device is operating.  
Display indicators help you manage your roaming charges by letting you  
know when you’re off the Sprint Nationwide PCS Network and whether  
you’re operating in digital or analog mode. (For more information, see  
Note:  
Section 2A: Your PCS Vision Phone - The Basics  
13  
Features of Your PCS Vision Picture Phone  
Congratulations on the purchase of your PCS Vision Picture Phone.  
The PM-6225 by Nokia is lightweight, easy-to-use, and reliable, and it  
offers many significant features and service options. The following  
list previews some of those features and options and provides page  
numbers where you can find out more:  
Dual-band/tri-mode capability allows you to make and receive  
calls while on the Sprint Nationwide PCS Network and to roam  
on other analog and 800 and 1900 MHz digital networks where  
Sprint has implemented roaming agreements (“Controlling Your  
SM  
PCS Vision provides access to the wireless Internet in digital  
PCS Mail and SMS Text Messaging provide quick and convenient  
text messaging capabilities (“PCS Messaging” on page 150).  
SM  
PCS Voice Command lets you dial phone numbers by speaking  
someone’s name or the digits in their phone number (“Getting  
Games, ringers, screen savers, and other applications can be  
downloaded to your phone to make your PCS Vision Phone as  
Space for up to 500 Contacts List entries with support for  
multiple numbers and addresses in each entry (“Adding a New  
A voice recorder can record and store up to 3 minutes of your  
The built-in organizer lets you schedule alerts to remind you of  
A countdown timer has an alarm and a multiple-mode stopwatch  
The built-in FM Radio allows you to tune in to your favorite  
The camera lets you capture events when they happen and share  
102).  
Section 2A: Your PCS Vision Phone - The Basics  
14  
 
Infrared (IR) connectivity lets to share phone numbers, memos,  
and other information with friends and business associates  
who have compatible phones (“Using the IR (Infrared) Beam” on  
Location information sharing uses GPS technology to share your  
geographic location (“Location Settings” on page 42).  
A note about memory:  
The following features may share memory: contacts, text, graphics  
and ringers, calendar to-do notes, games, and applications. Use of  
one or more of these features may reduce the memory available for  
the remaining features that share memory. For example, saving many  
calendar notes may use all of the available memory. Your phone may  
display a message that the memory is full when you try to use a  
shared memory feature. In this case, delete some of the information  
or entries stored in the shared memory features before continuing.  
Some of the features, such as ring tones, graphics, and applications  
may have a certain amount of memory specially allotted to them in  
addition to the memory shared with other features.  
Section 2A: Your PCS Vision Phone - The Basics  
15  
Turning Your Phone On and Off  
Turning Your Phone On  
To turn your phone on:  
Press and hold the power button  
on the top  
of your phone for approximately two seconds.  
Once your phone is on, it displays “Searching for  
Service” that indicates your phone is searching  
for a signal. When your phone finds a signal, it  
automatically enters the standby mode—the  
phone’s idle state. At this point, you are ready to  
begin making and receiving calls.  
If your phone is unable to find a signal after 15 minutes of searching,  
a Power Save feature is automatically activated. When a signal is  
found, your phone automatically returns to the standby mode.  
In Power Save mode, your phone searches for a signal periodically  
without your intervention. You can also initiate a search for  
PCS Service by pressing any key (when your phone is turned On).  
The Power Save feature helps to conserve your battery power when you  
are in an area where there is no signal.  
Tip:  
Turning Your Phone Off  
To turn your phone off:  
Press and hold  
for two seconds until you see “Goodbye” on  
the display screen.  
Your screen remains blank while your phone is off (unless the  
battery charger is connected).  
Section 2A: Your PCS Vision Phone - The Basics  
16  
   
Using Your Phone’s Battery and Charger  
Battery Capacity  
Your PCS Vision Phone is equipped with a Lithium Ion (LiIon)  
battery. It allows you to recharge your battery before it is fully  
drained. Operation times are estimates only and depend on signal  
strength, phone use, network conditions, features used, battery age  
and condition (including charging habits), temperatures to which  
the battery is exposed, and many other factors.  
The battery provides the following approximate maximum  
usage times:  
Function  
Digital  
Analog  
Talk time  
2.35 hours 45 minutes  
Standby time  
7 days  
20 hours  
When the battery charge is getting low, the “Battery low. Please  
recharge” message is displayed on your screen, and the phone  
sounds a warning tone. When the battery has become too weak to  
operate your phone, the message “Switching off. Please recharge” is  
displayed on your screen.  
Long backlight settings, searching for service, vibrate mode, and  
browser use affect the battery’s talk and standby times.  
Note:  
Be sure to watch your phone’s battery level indicator and charge the  
battery before it runs out of power.  
Tip:  
Section 2A: Your PCS Vision Phone - The Basics  
17  
   
Installing the Battery  
To install the battery, replace the battery, or to access your phone’s  
ESN (electronic serial number), you must first remove the phone  
back cover.  
Before removing the cover, always switch off the power and disconnect  
the charger and any other device. Avoid touching electronic components  
while changing the covers. Always store and use the device with the  
covers attached.  
Note:  
To remove the back cover, turn the phone upside down, press the  
release button down, and push the back cover away.  
To install the LiIon battery:  
1. Insert the battery (label side facing up) into the cavity at a  
45-degree angle. (The metal contacts must be aligned with  
and touching the metal prongs.)  
2. Press down on the battery until it snaps into place.  
Section 2A: Your PCS Vision Phone - The Basics  
18  
 
Removing the Battery  
To remove your battery:  
1. Make sure the power is off so that you don’t lose any stored  
numbers or messages.  
2. To remove the back cover, turn the phone upside down, press  
the release button down, and push the back cover away.  
3. Pull upward on the lower end of the battery with your finger tip  
and remove the battery from the phone at a 45-degree angle.  
Charging the Battery  
Your PCS Vision Phone’s LiIon battery is rechargeable and should be  
charged as soon as possible so you can begin using your phone.  
Keeping track of your battery’s charge is important. If  
your battery level becomes too low, your phone  
automatically turns off and you will lose all the  
information you were just working on. For a quick  
check of your phone’s battery level, glance at the  
battery charge indicator located in the upper-right  
corner of your phone’s display screen.  
Always use a Sprint-approved desktop charger, travel charger, or  
vehicle power adapter to charge your battery.  
Using the wrong battery charger could cause damage to your phone  
and void the warranty.  
Warning!  
The following charging times for the 780 mAh BLD-3 LiIon battery  
are approximate:  
ACP-7 Charger. Up to 3 hours charging time  
ACP-12 Charger. Up to 1.5 hours charging time  
Section 2A: Your PCS Vision Phone - The Basics  
19  
   
Using the Desktop Charger  
To use the desktop charger provided with your phone:  
1. Install the phone battery in the phone.  
2. Plug the prongs of the adapter into an electrical outlet.  
3. Plug the round end of the AC  
adapter into the desktop  
charger and insert the phone  
into the charger slot.  
– or –  
Plug the adapter directly into  
the charger jack on the phone,  
if the charger stand is not used. (If the phone is on, the screen  
briefly displays a “Charging” message followed immediately by a  
scrolling battery strength indicator. If the phone is off, the screen  
displays “Phone off. Battery charging”.)  
4. When the battery is fully charged, unplug the phone from the  
charger. (If the phone is on, the battery strength indicator  
stops scrolling. If the phone is off, the screen displays “Phone  
off. Charge completed”.)  
With the Sprint-approved LiIon battery, you can recharge the battery  
before it becomes completely run down.  
Unplug the charger from the electrical plug and the device when not in  
use. Do not leave the battery connected to the charger. Overcharging  
may shorten its lifetime. If left unused, a fully charged battery will lose  
its charge over time. Temperature extremes can affect the ability of  
your battery to charge.  
Warning!  
Connecting Accessories  
Headset accessories can be connected  
using the universal headset jack on the side  
of your phone or the Nokia Pop-Port  
connector. Using the headset and the  
keypad of your phone, you can make and  
answer calls as usual.  
Section 2A: Your PCS Vision Phone - The Basics  
20  
       
Holding Your Phone Properly  
Hold your phone by placing your index finger  
on the lower back cover. This helps optimize  
reception by preventing your hand from  
obstructing the internal antenna.  
Displaying Your Phone Number  
Just in case you forget your phone number, your PCS Vision Phone  
can remind you.  
To display your phone number:  
1. Press Contacts, scroll to My phone no., and press Select. (Your  
phone number is displayed.  
2. Press  
to return to the standby mode.  
To access the phone main menu, press Menu from the standby mode.  
Menu items may be selected by highlighting them with the navigation  
key and pressing Select.  
Note:  
Section 2A: Your PCS Vision Phone - The Basics  
21  
     
Making and Answering Calls  
Making Calls  
Placing a call from your PCS Phone is as easy as making a call from  
any land line phone. Just enter the number and press  
on your way to clear calls.  
, and you’re  
To make a call using your keypad:  
1. Make sure your phone is on.  
2. Enter a phone number. (If you make a mistake while dialing,  
press Clear to erase one digit at a time. Press and hold Clear to  
erase the entire number.)  
3. Press  
. (To make a call when you are roaming and  
Call Guard is enabled, see “Controlling Roaming Charges Using  
4. Press  
or End call when you are finished.  
To redial your last outgoing call, press  
twice.  
Tip:  
When making calls off the Sprint Nationwide PCS Network, always dial  
using 11 digits (1 + area code + phone number).  
You can also place calls from your PCS Phone by using PCS Voice  
SM  
179), Speed Dialing numbers from your Phone Book (“Using Speed  
Dialing” on page 28), and using your Call Logs listings (“Making a  
Section 2A: Your PCS Vision Phone - The Basics  
22  
     
Dialing Options  
To speed dial a phone number from the standby mode, press and hold  
Tip:  
the speed dial number. (For information on setting up speed dial  
feature will not work when you are roaming off the Sprint Nationwide  
PCS Network; when roaming you must dial using eleven digits [1 + the  
area code + the seven-digit phone number.])  
When you enter numbers in the standby mode, you will see a variety  
of dialing options appear by pressing Options.  
To choose an option, scroll to it and press Select.  
Save: Saves the phone number to your Phone Book. (See “Saving  
Add to contact: Adds the number to an existing contact in your  
Contacts list.  
Send picture: Allows you to send a picture to that number.  
Send message: Sends a text message to that number.  
To home: Lets you make a currency conversion.  
To foreign: Lets you make a currency conversion.  
Countdown timer: Sets a timer and a reminder.  
Call: Dials the phone number. If you are roaming and have the  
Call Guard feature activated, select OK. (See “Controlling  
Section 2A: Your PCS Vision Phone - The Basics  
23  
   
Answering Calls  
To answer an incoming call:  
1. Make sure your phone is on. (If your phone is off, incoming  
calls go to voicemail.)  
2. Press  
to answer an incoming call.  
Your PCS Vision Phone notifies you of incoming calls in the  
following ways:  
The phone rings or vibrates.  
The backlight illuminates.  
The screen displays an incoming call message.  
If the incoming call is from a number stored in your Phone Book, the  
phone book entry’s name is displayed. The caller’s phone number  
may also be displayed, if available.  
The following options are also displayed. To select an option, press  
the corresponding selection key.  
Silence (  
call, it is forwarded to your voicemail box.  
Answer ( ) answers the incoming call.  
) or  
mutes the ringer. If you do not answer the  
Answering a Roam Call With Call Guard Enabled  
Call Guard is an option that helps you manage your roaming charges  
when making or receiving calls while outside the Sprint Nationwide  
55 for more information about roaming.)  
To answer a call when you are roaming and Call Guard is enabled:  
Select Answer to answer the call. (See “To answer incoming  
When your phone is off, incoming calls go directly to voicemail.  
Note:  
Ending a Call  
To disconnect a call when you are finished:  
Press  
or End call.  
Section 2A: Your PCS Vision Phone - The Basics  
24  
   
Missed Call Notification  
If you received a call while your phone was turned off,  
“New voice message” will appear on your display when the  
phone is turned back on.  
To hear the voice message:  
Press Listen.  
Calling Emergency Numbers  
Be sure your phone is turned on and in service. Press  
as needed to return to the standby mode (for example, to exit a call or to  
exit a menu).  
as many times  
Note:  
Official emergency numbers vary by location. Check before you need to use  
this feature to make sure the number is the proper one for your location.  
Note:  
You can place calls to 911 (dial  
and press  
), even if  
your phone is locked or your account is restricted.  
This phone, like any wireless phone, operates using radio signals,  
wireless and landline networks, as well as user-programmed functions.  
Because of this, connections in all conditions cannot be guaranteed.  
Therefore you should never rely solely upon any wireless phone for  
essential communications (e.g. medical emergencies). Emergency calls  
may not be possible on all wireless phone networks or when certain  
network services and/or phone features are in use. Emergency numbers  
vary by location. When making an emergency call, remember to give all  
the necessary information as accurately as possible. Remember that  
your wireless phone may be the only means of communication at the  
scene of an accident. Do not end the call until given permission to do so.  
Note:  
Section 2A: Your PCS Vision Phone - The Basics  
25  
       
In-Call Options  
Selecting Options during a call displays a list of features you may use  
during the course of a call.  
Press Options and scroll to one of the following options:  
Mute/Unmute to mute your microphone, or to unmute the  
microphone if it was muted earlier.  
Speakerphone to let others hear the call.  
Due to higher volume levels, do not place the phone near your ear  
during speakerphone use.  
Warning!  
Three-way call to set up a three-way conversation  
End all calls to end all calls.  
Touch tones to send a touch-tone during a call.  
Contacts to open your Contacts list menu options  
Menu to view options from your main menu.  
End-of-Call Options  
After receiving a call from or making a call to a phone number that is  
not in your Phone Book, the phone number and the duration of the  
call are displayed.  
After receiving a call from or making a call to a phone number that is  
already in your Phone Book, the Phone Book entry name and the  
duration of the call are displayed.  
To select an option after a call has ended, press Options, and scroll to  
one of the following options:  
Save to add the caller to your Phone Book.  
Add to contact to add the caller number to an existing contact.  
Call to dial the caller’s number.  
The End-of-Call options are not displayed for calls identified as  
No ID or Restricted.  
Note:  
Section 2A: Your PCS Vision Phone - The Basics  
26  
   
Saving a Phone Number  
Your PCS Vision Phone can store up to 500 contacts and up to 2500  
phone numbers. Your phone automatically sorts the Phone Book  
entries alphabetically. (For more information, see Section 2G: “Using  
To save a number from the standby mode:  
1. Enter a phone number.  
2. Select Options, scroll to Save, and press Select.  
3. Enter a Contact name and press OK.  
4. To add other information to the contact, press Options.  
- or -  
Press Done if finished.  
A phone number labeled Fax can only be dialed using a  
personal computer.  
Note:  
Dialing From the Phone Book  
To dial directly from a Phone Book entry:  
1. Press Contacts, scroll to Search, and press Select.  
2. Enter the first letter, or letters, of the contact you seek. (A list  
of contacts beginning with those letters is displayed.)  
– or –  
Scroll up or down to find the contact you seek.  
From the main menu, press the down navigation key  
list of contacts.  
to display your  
Tip:  
3. Highlight the contact you want to call and press  
. (The  
display confirms that the number has been dialed when it  
shows “Calling...”.)  
4. To end the call, press  
or End call.  
Section 2A: Your PCS Vision Phone - The Basics  
27  
     
Using Speed Dialing  
With this feature, you can dial Speed Dial entries using one key press  
for key locations 2–9.  
To activate Speed Dialing:  
1. Press Menu, scroll to Settings, and press Select.  
2. Scroll to Call settings and press Select.  
3. Scroll to Speed dialing and press Select.  
4. Highlight On and press Select.  
To Speed Dial locations 0–9:  
For information on creating key assignments, see “Assigning Speed  
1. Press the key assigned to the number you wish to dial and  
press  
, or press and hold the assigned key for two seconds.  
(The display confirms that the number has been dialed when it  
shows “Calling...”.)  
2. To end the call, press  
or End call.  
Speed dialing is not available when you are roaming; when you are  
roaming off the Sprint Nationwide PCS Network, you must always dial  
using eleven digits (1 + area code + number).  
Note:  
Section 2A: Your PCS Vision Phone - The Basics  
28  
     
Entering Text  
Selecting a Character Input Mode  
Your PCS Vision Phone provides convenient ways to enter words,  
letters, punctuation, and numbers whenever you are prompted to  
enter text (for example, when adding a Phone Book entry or when  
sending PCS Mail and SMS Text Messages).  
To change the character input mode:  
1. When you display a screen where you can enter text, press  
to select a different text input mode.  
2. Select a character input mode:  
or  
, or  
T9 Predictive Text is on or off (see “Entering  
,
to enter sentence-case, uppercase,  
or lowercase characters by tapping the keypad  
to enter numbers (see “Entering Numbers and  
Section 2A: Your PCS Vision Phone - The Basics  
29  
       
Entering Characters Using T9 Text Input  
T9 Text Input (Predictive Text Input) lets you enter text in your  
PCS Vision Phone by pressing keys just once per letter. (To select  
this mode when entering text, see “Selecting a Character Input  
T9 Text Input analyzes the letters you enter using an intuitive word  
database and creates a suitable word. (The word may change as you  
type.) If the word you want does not display after you have entered  
all the letters, press  
to scroll through additional word selections.  
To accept a word and insert a space, press  
.
If you make a mistake, press Clear to erase a single character. Press  
and hold Clear to delete an entire entry.  
Using T9 Input  
You may enter text using T9 text input in certain text field.  
To use T9 input:  
1. Select a text field for text input.  
2. Press and hold Options until T9 prediction on is momentarily  
displayed on your screen. (This input mode remains active until  
you turn it off by pressing and holding Options until T9  
prediction off is momentarily displayed.)  
When predictive text is on,  
predictive text is off,  
appears with the text mode icon. When  
appears with the text mode icon.  
Tip  
3. Key in your text. (For example, type “car” by pressing  
. The word is not completed until the last letter is  
pressed. If your word does not appear, press  
to view other  
words associated with this key combination.)  
4. Once a word is complete, press  
to create a space and  
continue keying in your text.  
Section 2A: Your PCS Vision Phone - The Basics  
30  
     
Adding a Word to the T9 Database  
If a word you want to enter does not display as an option when you  
are using T9 Text Input, you can add it to the database.  
To add a word to the T9 Text Input database:  
1. Select the Abc character input mode. (If the word you need  
does not appear, press  
to scroll through alternative words  
stored in the database. See “Selecting a Character Input Mode”  
2. If the word you need still does not appear, press Spell.  
3. Enter the word using multi-tap text entry, press Options, and  
press Save. (The word is added to the database and you can  
continue entering your memo using predictive text. See  
For more information about T9 Text Input, visit the Tegic Website  
at www.T9.com.  
Section 2A: Your PCS Vision Phone - The Basics  
31  
Entering Characters by Tapping the Keypad  
To enter characters by tapping the keypad, select the Abc mode (see  
corresponding key repeatedly until the desired character appears.  
By default, the first letter of a word is capitalized and following  
letters are lowercase.  
Characters scroll in the following order:  
. @ ? ! - , &, etc.  
A B C 2  
D E F 3  
G H I 4  
J K L 5  
M N O 6  
P Q R S 7  
T U V 8  
W X Y Z 9  
Space 0  
Shift  
(to create a new line)  
After a character is entered, the cursor automatically advances to the  
next space after two seconds or when you enter a character on a  
different key.  
Entering Numbers and Symbols  
To enter numbers:  
Select the  
mode and press the appropriate key. (See  
- or -  
Press and hold a number key for two seconds while in the Abc  
mode to insert that number.  
To enter symbols and emoticons:  
Press  
, highlight a symbol, and press Insert.  
- or -  
Press  
a second time, highlight an emoticon, and press Insert.  
Section 2A: Your PCS Vision Phone - The Basics  
32  
       
Section 2B  
Controlling Your Phone’s Settings  
In This Section  
Using the menu options available on your PCS Vision Phone, you can  
customize your phone to sound, look, and operate just the way you want it to.  
This section describes how you can change your phone’s settings to  
best suit your needs. Take a few moments to review these options and  
to adjust or add settings that are right for you.  
Section 2B: Controlling Your Phone’s Settings  
33  
 
Setting Your Phone’s Date and Time  
Your phone’s date and time need to be set to allow some phone  
features to operate. These settings may have already been made for  
your phone.  
To let your phone automatically set its date and time:  
Use the following steps to let your phone automatically set its time and  
date based on the time and date of the local phone network.  
1. Press Menu, scroll to Settings, and press Select.  
2. Scroll to Time settings and press Select.  
3. Scroll to Auto-update of date & time and press Select.  
4. Scroll to On and press Select.  
To manually set the date and time:  
1. Press Menu, scroll to Settings, and press Select.  
2. Scroll to Time settings and press Select.  
3. Scroll to Date, press Select, scroll to Set the date, and press Select.  
4. Enter the date by using either the keypad or the navigation  
keys and press OK.  
5. Press Date, scroll to Date format, and press Select.  
6. Scroll to the date format you prefer and press Select. (You can  
choose to hide the date or show the date on the phone’s display  
screen by selecting Hide date or Show date in the Date menu.)  
7. Return to Time settings and press Select.  
8. Scroll to Clock, press Select, scroll to Set the time, and press Select.  
9. Enter the time by using either the keypad or the navigation  
keys and press OK.  
10. Select am or pm and press Select.  
11. Scroll to Clock, press Select, scroll to Time format, and  
press Select.  
12. Select 24-hour or 12-hour and press Select. (You can choose to  
hide the time or show the time on the phone’s display screen by  
selecting Hide clock or Show clock in the Clock menu.)  
Section 2B: Controlling Your Phone’s Settings  
34  
   
Profiles  
Your phone has five different profiles (Normal, Silent, Meeting,  
Outdoor, and Pager). Each profile can be customized to your  
specifications. For example, you may wish to customize your Meeting  
profile to accommodate your needs for taking calls during meetings.  
Selecting a Profile  
At any given time, you can select one of the five phone profiles to  
suit your immediate situation. The most convenient way to do this is  
to use the navigation key.  
To select a profile:  
Press the power key ( ), scroll to a profile, and press Select.  
Customizing a Profile  
To customize a profile:  
1. Press Menu, scroll to Profiles, and press Select.  
2. Scroll to Meeting (or any other profile) and press Select.  
3. Scroll to Customize and press Select.  
4. Scroll through each option and make adjustments as desired.  
5. Press Back to go back a menu or press  
to return to the  
standby mode.  
Renaming a Profile  
Any of the profiles can be renamed, except the Normal profile.  
To name a profile:  
1. Press Menu, scroll to Profiles, and press Select.  
2. Scroll to a profile (except Normal) and press Select.  
3. Scroll to Customize and press Select.  
4. Scroll to Profile name and press Select.  
5. Enter a new profile name in the text box and press OK. (The  
profile can be renamed again anytime you choose.)  
Section 2B: Controlling Your Phone’s Settings  
35  
           
Sound Settings  
Ringer Types  
Ringer types help you identify incoming calls and messages. You can  
assign ringer types to individual phone book entries, types of calls,  
and types of messages.  
Preprogrammed Ringers include a variety of standard ringer types  
and familiar music.  
Vibrating Ringer alerts you to calls or messages without  
disturbing others.  
Downloaded Ringers can be downloaded right to your phone.  
Selecting Ringer Types for Voice Calls  
Your PCS Vision Phone provides a variety of ringer options that  
allow you to customize your ring and volume settings. These options  
allow you to identify incoming calls by the ring.  
To select a ringer type for voice calls:  
1. Press  
to list your contacts.  
2. Scroll through your contacts list, highlight a contact, press  
Details, then press Options.  
3. Scroll to Custom tone and press Select.  
4. Scroll to choose a ringing tone to assign to this contact and  
press Select.  
Selecting Ringer Types for Messages  
To select a ringer type for messages:  
1. Press Menu, scroll to Settings, and press Select.  
2. Scroll to Tone settings and press Select.  
3. Scroll to Message alert tone and press Select.  
4. Choose an alert tone and press Select.  
Section 2B: Controlling Your Phone’s Settings  
36  
               
Selecting a Key Tone  
Your phone offers a number of options for selecting the audible tones  
accompanying a key press. (Longer tone lengths may be better for  
tone recognition when dialing voicemail or other automated systems.)  
To select a key tone length:  
1. Press Menu, scroll to Settings, and press Select.  
2. Scroll to Phone settings and press Select.  
3. Scroll to Touch tones and press Select.  
4. Scroll to Touch tone length and press Select.  
5. Choose either Short or Long and press Select.  
To select a key tone volume:  
1. Press Menu, scroll to Settings, and press Select.  
2. Scroll to Tone settings and press Select.  
3. Scroll to Keypad tones and press Select.  
4. Press  
or  
to change the key tone volume and press Select.  
Adjusting the Ringer and Earpiece Volume  
You can adjust your phone’s volume settings to suit your needs and  
your environment.  
To adjust the ringer volume:  
1. Press Menu, scroll to Settings, and press Select.  
2. Scroll to Tone settings and press Select.  
3. Scroll to Ringing volume and press Select.  
4. Press  
or  
to change the ringer volume and press Select.  
To adjust the earpiece volume:  
You can adjust the earpiece volume in either the standby mode or  
during a call. The volume control is on the left side of your phone.  
Press the top end of the volume control to increase the volume.  
- or -  
Press the bottom end of the volume control to decrease the volume.  
The volume level will remain unchanged unless adjusted again.  
Section 2B: Controlling Your Phone’s Settings  
37  
             
Alert Notification  
Your PCS Phone can alert you with an audible tone when you  
change service areas, once a minute during a voice call, or when a  
call has been connected.  
To enable or disable alert sounds:  
1. Press Menu, scroll to Settings, and press Select.  
2. Scroll to Roaming and press Select.  
3. Scroll to Service change tones and press Select.  
4. Choose On to enable or Off to disable and press Select.  
Silence All  
There may be times when you need to silence your phone entirely.  
The phone’s Silent profile allows you to mute all sounds without  
turning your phone off.  
To activate Silence All:  
Press the power key ( ), scroll to Silent, and press Select.  
(The Silent profile is selected, and the screen will display  
“Silent.”)  
To deactivate Silence All:  
Press the power key ( ), scroll to Normal (or a profile other  
than Silent), and press Select.  
Section 2B: Controlling Your Phone’s Settings  
38  
       
Display Settings  
Changing the Text Greeting  
The text greeting can be up to twelve characters and is displayed on  
your phone’s screen in the standby mode. You may choose to  
display a custom greeting or you may display your PCS User Name  
on the phone’s screen.  
To display or change your custom greeting:  
1. Press Menu, scroll to Settings, and press Select.  
2. Scroll to Phone settings and press Select.  
3. Scroll to Welcome note and press Select.  
4. Enter a welcome note (up to 44 characters) and press Options.  
5. Scroll to Save and press Select.  
Now, each time you turn on your phone, you can momentarily see  
your personalized welcome note!)  
To access the phone main menu, press Menu from the standby mode.  
Menu items may be selected by scrolling to them with the navigation key  
and pressing Select.  
Note:  
To display your PCS User Name as your greeting:  
1. Press Menu, scroll to Settings, and press Select.  
2. Scroll to Display settings and press Select.  
3. Scroll to Banner and press Select.  
4. Scroll to Customize, type your PCS User Name, and press OK.  
Section 2B: Controlling Your Phone’s Settings  
39  
       
Changing the Display Screen  
Your new PCS Vision Phone offers options for what you see on the  
display screen while in the standby mode.  
To change the wallpaper display images:  
1. Press Menu, scroll to Settings, and press Select.  
2. Scroll to Display settings and press Select.  
3. Scroll to Wallpaper, press Select, scroll to Select wallpaper, and  
press Select.  
4. Scroll to the Screen savers folder and press Select.  
5. Scroll to highlight a screen saver image and press Options.  
6. Scroll to Open and press Select to see a larger image of the  
screen saver.  
– or –  
Scroll to Set as wallpaper and press Select. (The wallpaper is  
automatically turned on when you press Select.)  
To turn off the wallpaper display image:  
1. Press Menu, scroll to Settings, and press Select.  
2. Scroll to Display settings and press Select.  
3. Scroll to Wallpaper and press Select.  
4. Scroll to Off and press Select.  
Changing the Brightness  
You can adjust your screen’s contrast (brightness) to suit your  
surroundings.  
To adjust the display brightness:  
1. Press Menu, scroll to Settings, and press Select.  
2. Scroll to Display settings and press Select.  
3. Scroll to Display brightness and press Select.  
4. Adjust the brightness by pressing the left or right scroll keys,  
then press OK.  
Section 2B: Controlling Your Phone’s Settings  
40  
         
Changing the Theme Color  
You can customize your phone display’s appearance by selecting a  
color scheme to reflect your personality.  
To change the display’s theme color:  
1. Press Menu, scroll to Settings, and press Select.  
2. Scroll to Display settings and press Select.  
3. Scroll to Color schemes and press Select.  
4. Scroll to select a color scheme and press Select.  
Changing the Clock Display  
You can choose whether you want your phone’s clock to display (or  
to be hidden), the time format, and whether to display both time  
more information.)  
Section 2B: Controlling Your Phone’s Settings  
41  
     
Location Settings  
Your PCS Vision Phone is equipped with a Location feature for use  
with location-based services that may be available in the future.  
The use and accuracy of this feature is dependent on the network,  
satellite systems, and the agency receiving the information. It may  
not function in all areas or at all times.  
The Location feature allows the network to detect your position.  
Turning Location off will hide your location from everyone  
except 911 emergency operators.  
Even if the Location feature is enabled, no service may use your location  
without your express permission.  
Note:  
To enable your phone’s Location feature:  
1. Press Menu, scroll to Settings, and press Select.  
2. Scroll to Call Settings and press Select.  
3. Scroll to Location info sharing and press Select. (A message  
explaining the options of the Location Info Sharing feature  
displays on your screen after several seconds.)  
4. To read the message, press More or scroll through the message  
using the up and down scroll keys, then press OK.  
5. Select 911 only or On and press OK.  
If you select 911 only, your phone’s location information is  
shared with the network only during emergency calls.  
(911 only is the default profile.)  
If you select On, your phone’s location information is shared  
with the network whenever the phone is powered on  
and activated.  
6. When the confirmation message appears, press OK.  
When the Location feature is on, your phone’s standby screen will  
display the  
icon. When Location is turned off (911 only), the  
icon will display.  
Section 2B: Controlling Your Phone’s Settings  
42  
     
TTY Use With PCS Service From Sprint  
A TTY (also known as a TDD or Text Telephone), is a telecommunications  
device that allows people who are deaf or hard of hearing, or who have  
speech or language disabilities, to communicate by telephone.  
Your phone is compatible with TTY devices that comply with the  
TSB 121 industry standard. Please check with the manufacturer of  
your TTY device to ensure that it supports digital wireless  
transmission. Your Nokia phone is equipped with a universal 2.5mm  
accessory jack that can be used to connect to the cable of a “cellular  
ready” or “cellular compatible” TTY/TDD device. If this cable was not  
provided with your TTY device, contact your TTY device  
manufacturer to purchase the connector cable.  
When establishing your PCS Service, please call PCS Customer  
Solutions via the state Telecommunications Relay Service (TRS) by  
first dialing  
. Then provide the state TRS with this  
number: 866-727-4889.  
To connect your TTY device:  
1. Confirm that your TTY device is “cellular ready” or “cellular  
compatible” and that you have the proper connecting cable,  
supplied by the manufacturer of your TTY device.  
2. Plug the 3.5mm end of the cable into the input jack of the  
TTY device, and plug the 2.5mm end of the cable into the  
2.5mm universal jack of your Nokia phone.  
Section 2B: Controlling Your Phone’s Settings  
43  
     
To turn the TTY mode on or off:  
1. Connect the TTY/TDD device to your phone.  
2. Press  
.
3. Follow the prompts by presing OK or Exit.  
4. Select Yes to turn on the TTY mode and dial the contact’s number.  
- or -  
Select No to turn off the TTY mode.  
In TTY Mode, your phone will display the TTY access icon.  
Note:  
If TTY mode is enabled, the audio quality of non-TTY devices connected  
to the headset jack may be impaired.  
911 Emergency Calling  
IMPORTANT  
NOTICE:  
Sprint recommends that TTY users make emergency calls by  
other means, including Telecommunications Relay Services  
(TRS), analog cellular, and landline communications. Wireless  
TTY calls to 911 may be corrupted when received by public safety  
answering points (PSAPs) rendering some communications  
unintelligible. The problem encountered appears related to TTY  
equipment or software used by PSAPs. This matter has been  
brought to the attention of the FCC, and the wireless industry and  
PSAP community are currently working to resolve this.  
Section 2B: Controlling Your Phone’s Settings  
44  
Phone Setup Options  
Shortcut  
Your phone offers you the option of assigning a shortcut key to a  
favorite or often-used function. Pressing the right selection key in the  
standby mode will launch your personally designated shortcut.  
Contacts is the default shortcut for the right selection key.  
To assign your shortcut key:  
1. Press Menu, scroll to Settings, and press Select.  
2. Scroll to Right selection key settings and press Select.  
3. Scroll to Select options and press Select.  
4. Scroll the list of options, Mark or Unmark your choices, and  
press Done when finished. (Multiple functions can be marked.)  
5. Press Yes to confirm your changes.  
6. Scroll to Organize and press Select.  
7. To rearrange the order of the functions press Move, otherwise,  
press Done. (Notice that the right selection key is now Go to,  
instead of the default Contacts.)  
8. To use a shortcut, press Go to, choose a shortcut, and press Select.  
Call Answer Mode  
You can determine how to answer incoming calls on your phone,  
whether you want to be required to press Answer or  
as usual,  
or whether you can press any key to answer.  
To set call answer mode:  
1. Press Menu, scroll to Settings, and press Select.  
2. Scroll to Call settings and press Select.  
3. Scroll to Anykey answer and press Select.  
4. Choose On and press Select. (Now you can answer a call by  
pressing any number key.  
- or -  
Choose Off and press Select to disable any key answering.  
Section 2B: Controlling Your Phone’s Settings  
45  
       
Auto-Answer Mode  
You may set your phone to automatically pick up incoming calls  
when connected to an optional hands-free car kit or headset.  
To set Auto-Answer mode:  
1. Connect the headset device to your phone.  
2. Press Menu, scroll to Settings, and press Select.  
3. Scroll to Enhancement settings and press Select.  
4. Scroll to Headset, press Select, scroll to Automatic answer, and  
press Select.  
5. Choose On and press Select. (Now calls will be answered  
automatically when using the headset.)  
- or -  
Choose Off and press Select to disable automatic answering.  
Display Language  
You can choose to display your PCS Phone’s menus in English or  
in Spanish.  
Selecting a language you do not understand may present a problem  
when attempting to navigate menus to change the language back.  
Tip:  
To assign a language for the phone’s display:  
1. Press Menu, scroll to Settings, and press Select.  
2. Scroll to Phone settings and press Select.  
3. Scroll to Phone language and press Select.  
4. Scroll to select a display language and press Select. (A message  
appears to confirm the change.)  
Section 2B: Controlling Your Phone’s Settings  
46  
       
Section 2C  
Setting Your Phone’s Security  
In This Section  
By using the security settings on your PCS Vision Phone, you receive  
peace of mind without sacrificing flexibility. This section will familiarize  
you with your phone’s security settings. With several options available,  
you can customize your phone to meet your personal needs.  
Section 2C: Setting Your Phone’s Security  
47  
 
Accessing the Security Menu  
All of your phone’s security settings are available through the  
Security menu. You must enter your lock code to view the  
Security menu.  
To access the Security menu:  
1. Press Menu, scroll to Settings, and press Select.  
2. Scroll to Security settings and press Select.  
3. Enter your lock code and press OK. (The Security menu  
is displayed.)  
If you can’t recall your lock code, try using the last four digits of either  
your Social Security number or PCS Phone Number or try 0000. If none  
of these work, call PCS Customer Solutions at 1-888-211-4PCS (4727).  
Tip:  
To access the phone’s main menu, press Menu from the standby mode.  
Menu items may be selected by highlighting them with the navigation  
key and pressing Select.  
Note:  
Using Your Phone’s Lock Feature  
Locking Your Phone  
When your phone is locked, you can only receive incoming calls or  
make calls to 911, PCS Customer Solutions, or special numbers.  
To lock your phone:  
1. Press Menu, scroll to Settings, and press Select.  
2. Scroll to Security settings and press Select.  
3. Enter your lock code and press OK.  
4. Scroll to Phone lock and press Select.  
5. Scroll to your preferred setting (Lock now, or On power-up) and  
press Select. (A brief message confirming your selection is  
displayed on the screen.)  
Section 2C: Setting Your Phone’s Security  
48  
         
Unlocking Your Phone  
To unlock your phone:  
Press Menu, enter your lock code, and press OK.  
Changing the Lock Code  
To change your lock code:  
1. Press Menu, scroll to Settings, and press Select.  
2. Scroll to Security settings and press Select.  
3. Enter your lock code and press OK.  
4. Scroll to Change lock code and press Select.  
5. Enter your new lock code and press OK. (You will be asked to  
verify your new lock code.)  
6. Re-enter your new lock code and press OK. (A message is  
displayed confirming the lock code is changed.)  
Calling in Lock Mode  
You can place calls to 911 and to your special numbers when in  
lock mode. (For information on special numbers, see “Using Special  
To place an outgoing call in lock mode:  
To call an emergency number, special number, or PCS Customer  
Solutions, enter the phone number and press  
.
You will not see the number you are dialing until you press  
.
Note:  
Section 2C: Setting Your Phone’s Security  
49  
       
Restricting Calls  
There may be occasions when you want to limit the numbers your  
phone can call or from which it can receive calls. You can use the  
Call restrictions setting to do just that. (The Call restrictions setting  
does not apply to 911 or PCS Customer Solutions.)  
If calls are restricted, a “Call not allowed” message is displayed when  
a call is attempted.  
To restrict calls:  
1. Press Menu, scroll to Settings, and press Select.  
2. Scroll to Security settings and press Select.  
3. Enter your lock code and press OK.  
4. Scroll to Call restrictions and press Select.  
5. Scroll to Restrict incoming calls or Restrict outgoing calls and  
press Select.  
6. To restrict all calls, scroll to Select, and press Select.  
Scroll to All calls, press Mark, and press Done.  
Press Yes to save the changes.  
- or -  
To restrict particular calls, scroll to Add restriction and press Select.  
Either enter the number and contact name you wish to  
restrict or press Search to scroll through your Contacts list  
and select the number.  
Press OK to accept the changes.  
Restricted incoming calls are forwarded to voicemail.  
Note:  
Section 2C: Setting Your Phone’s Security  
50  
   
Unrestricting Calls  
To unrestrict all calls:  
1. Press Menu, scroll to Settings, and press Select.  
2. Scroll to Security settings and press Select.  
3. Enter your lock code and press OK.  
4. Scroll to Call restrictions and press Select.  
5. Scroll to Restrict incoming calls or Restrict outgoing calls and  
press Select.  
6. Scroll to Select, press Select, scroll to All calls, press Unmark,  
press Done, and press Yes to save changes.  
Using Special Numbers  
Special numbers are important numbers that you have designated as  
being “always available.” You can call and receive calls from special  
numbers even if your phone is locked.  
You can save three special numbers in addition to your Phone Book  
entries (the same number may be in both directories).  
To add or replace a special number:  
1. Press Menu, scroll to Settings, and press Select.  
2. Scroll to Security settings and press Select.  
3. Enter your lock code and press OK.  
4. Scroll to Allowed nos. when phone locked and press Select.  
5. Scroll to one of the three positions and press Assign. (If there is  
no number assigned to a position, it will display “(empty).)  
6. Enter the phone number to allow and press OK.  
There are no Speed Dial options associated with special numbers.  
Note:  
Section 2C: Setting Your Phone’s Security  
51  
     
Erasing the Phone Book  
You can quickly and easily erase all of the contents of your  
Phone Book.  
To erase all the names and phone numbers in your Phone Book:  
1. Press Contacts, scroll to Delete, and press Select.  
2. Scroll to Delete all and press Select. (A message appears asking  
if you are sure you wish to delete your Contacts list. If you are  
sure, press OK.)  
This action cannot be undone.  
Note:  
3. Enter your lock code and press OK.  
Resetting Your Phone  
Resetting the phone restores all the factory defaults, including the  
ringer types and display settings. The Phone Book, Call Logs,  
Calendar, and Messaging are not affected.  
To reset your phone:  
1. Press Menu, scroll to Settings, and press Select.  
2. Scroll to Restore factory settings and press Select.  
3. Enter your lock code and press OK.  
Section 2C: Setting Your Phone’s Security  
52  
       
Security Features for PCS Vision  
Enabling and Disabling PCS Vision Services  
You can disable PCS Vision services without turning off your phone;  
however, you will not have access to all PCS Vision services, including  
Web and messaging. Disabling PCS Vision will avoid any charges  
associated with PCS Vision services. While signed out, you can still  
place or receive phone calls, check voicemail, and use other voice  
services. You may enable PCS Vision services again at any time.  
To disable PCS Vision services:  
1. Press Menu, scroll to Settings, and press Select.  
2. Scroll to PCS Vision and press Select.  
3. To sign out, scroll to Disable PCS Vision and press Select. (A  
message will display explaining that you will not have access to  
data services while disabled. Pressing Continue signs you out.)  
To enable PCS Vision services:  
1. Press Menu, scroll to Settings, and press Select.  
2. Scroll to PCS Vision and press Select.  
3. To sign in, scroll to Enable PCS Vision and press Select. (The  
browser will launch.)  
Section 2C: Setting Your Phone’s Security  
53  
     
Avoiding Unwanted Messages  
When someone sends you an SMS text message, your phone will  
automatically retrieve the message from the Internet and display it for  
you. You have the option to block certain kinds of incoming messages.  
To block incoming SMS text messages from a particular phone number:  
1. Launch your browser.  
2. From the Vision Home page, scroll to Messaging and press  
Select.  
3. Scroll to Short Mail and press Select.  
4. Scroll to Settings, press Select, scroll to Blocked Senders, and  
press Select.  
5. Press Edit.  
Press  
until the number mode icon displays.  
Note:  
6. In the Enter Number: box, type in the sender’s 10-digit phone  
number that you wish to block.  
7. Scroll to the Submit button and press Select.  
8. Scroll to OK and press Select again to confirm your decision.  
Section 2C: Setting Your Phone’s Security  
54  
 
Section 2D  
Controlling Your Roaming Experience  
In This Section  
Roaming is the ability to make or receive calls when you’re off the  
Sprint Nationwide PCS Network. Your new dual-band/tri-mode  
PCS Vision Phone works anywhere on the Sprint Nationwide  
PCS Network and allows you to roam on other analog and 1900 MHz  
and 800 MHz digital networks where we’ve implemented roaming  
agreements with other carriers.  
This section explains how roaming works as well as special features that  
let you manage your roaming experience.  
Section 2D: Controlling Your Roaming Experience  
55  
   
Understanding Roaming  
Recognizing Icons on the Display Screen  
Your phone’s display screen always lets you know when you’re off the  
Sprint Nationwide PCS Network and whether your phone is operating  
in analog or digital mode. The following chart indicates what you’ll  
see depending on where you’re using your phone.  
Roaming  
Indicator  
Analog Indicator  
Sprint Nationwide PCS Network  
Other Digital Networks  
Analog Roaming  
Analog Networks  
Remember, when you are using your phone off the Sprint Nationwide  
PCS Network, always dial numbers using 11 digits (1 + area code + number).  
Tip:  
Unless your PCS Service Plan includes roaming, you will pay a higher  
per-minute rate for roaming calls.  
Note:  
Roaming on Other Digital Networks  
When you’re roaming on digital networks, your call quality and  
security will be similar to the quality you receive when making calls  
on the Sprint Nationwide PCS Network. However, you may not be  
able to access certain features, such as PCS Vision.  
Section 2D: Controlling Your Roaming Experience  
56  
     
Roaming on Analog Networks  
When you roam on analog networks, you will experience a similar  
quality provided by other analog carriers today. Although some  
features, such as PCS Vision and PCS Voice Command, will be  
unavailable, you can still make and receive calls and access  
voicemail. If you are accustomed to PCS Service, you may notice  
some of the following differences when using analog service:  
You are more likely to experience static, cross-talk, fade-out, and  
dropped calls.  
Some features which are standard on the enhanced  
Sprint Nationwide PCS Network, such as call waiting,  
PCS Vision, and direct international dialing, are unavailable.  
Though callers can leave voicemail messages while you are  
roaming, you will not receive notification until you return to the  
Sprint Nationwide PCS Network. (See “Checking for Voicemail  
There are security and privacy risks (eavesdropping and cloning)  
that exist with conventional analog services today.  
Your battery’s charge will deplete more quickly and you will  
need to recharge it more often when you use your phone for  
analog roaming.  
If you’re on a call when you leave the Sprint Nationwide PCS Network  
and enter an area where roaming is available (whether digital or  
analog), your call is dropped. If your call is dropped in an area where you  
think PCS Service is available, turn your phone off and on again to  
reconnect to the Sprint Nationwide PCS Network.  
Note:  
When using your phone in analog mode, the phone may feel warm. This  
is normal for analog operation.  
Section 2D: Controlling Your Roaming Experience  
57  
 
Checking for Voicemail Messages While Roaming  
When you are roaming off the Sprint Nationwide PCS Network, you  
will not receive on-phone notification of new voicemail messages.  
Callers can still leave messages, but you will need to periodically  
check your voicemail for new messages if you are in a roaming  
service area for an extended period of time.  
To check your voicemail while roaming:  
1. Dial 1+area code+your PCS Phone Number.  
2. When you hear your voicemail greeting, press  
.
3. Enter your pass code at the prompt and follow the voice prompts.  
When you return to the Sprint Nationwide PCS Network, voicemail  
notification will resume as normal.  
Section 2D: Controlling Your Roaming Experience  
58  
   
Setting Your Phone’s Roam Mode  
Your PCS Phone allows you to control your ability to roam.  
By using the Roaming menu option, you can determine which  
signals your phone accepts.  
Set Mode  
Choose from three different settings on your dual-band/tri-mode  
phone to control your roaming experience.  
To set your phone’s roam mode:  
1. Press Menu, scroll to Settings, and press Select.  
2. Scroll to Roaming and press Select.  
3. Scroll to Set mode and press Select.  
4. To select an option, highlight it and press Select.  
Sprint allows you to access the enhanced  
Sprint Nationwide PCS Network only and prevents  
roaming on other networks.  
Automatic seeks PCS Service. When PCS Service is  
unavailable, the phone searches for an alternate system.  
Analog Only forces the phone to seek an analog roaming  
system. The previous setting (Sprint or Automatic) is  
restored the next time the phone is turned on.  
To access the phone’s main menu, press Menu from the standby mode.  
Menu items may be selected by highlighting them with the navigation  
key and pressing Select.  
Note:  
Section 2D: Controlling Your Roaming Experience  
59  
   
Controlling Roaming Charges Using  
Call Guard  
Your phone has two ways of alerting you when you are roaming off  
the Sprint Nationwide PCS Network: the roaming icon and Call  
Guard. Call Guard makes it easy to manage your roaming charges by  
requiring an extra step before you can place or answer a roaming  
call. (This additional step is not required when you make or receive  
calls while on the Sprint Nationwide PCS Network.)  
To turn Call Guard on or off:  
1. Press Menu, scroll to Settings, and press Select.  
2. Scroll to Roaming and press Select.  
3. Scroll to Call guard and press Select.  
4. Highlight On or Off and press Select.  
Voice Dialing and Speed Dialing are not available when you are roaming  
with Call Guard enabled.  
Note:  
To place roaming calls with Call Guard on:  
1. From the standby mode, enter a phone number. (You can also  
initiate a call from the Phone Book and Call Logs.)  
2. Press  
. (The message “Roaming rate applies. Place call?”  
is displayed.)  
3. Press OK to place the call.  
To answer incoming roaming calls with Call Guard on:  
1. To answer a roaming call (the message “Roam call” is  
displayed), press Answer. (The message “Roam rate applies.  
Answer call?” is displayed.)  
2. Press OK to accept the call.  
.
If the Call Guard feature is set to On, you need to take extra steps to  
make and receive roaming calls, even if you have selected the  
Reminder:  
Section 2D: Controlling Your Roaming Experience  
60  
       
Section 2E  
Navigating Through Menus  
In This Section  
Every function and feature of your PCS Vision Picture Phone can be  
accessed through an onscreen menu. This section is a road map to using  
your PM-6225 by Nokia. Please take a few moments to learn your way  
around and you’ll find your phone easier to use.  
Section 2E: Navigating Through Menus  
61  
 
Menu Navigation  
The navigation key on your PCS Vision Phone allows you to scroll  
through menus quickly and easily. The scroll bar at the right of the  
menu keeps track of your position in the menu at all times.  
To navigate through a menu, simply press the navigation key up or down.  
Menu Structure  
Selecting Menu Items  
As you navigate through a menu, the options are displayed on your  
screen. Select an option by scrolling to it and pressing Select.  
For example, if you want to view your last incoming call:  
1. From the standby mode, press Menu, scroll to Call logs, and  
press Select.  
2. Press the up or down navigation key to display Incoming calls,  
and press Select. (Received calls are displayed on the screen in  
the order they were received, with the most recent being at  
the top of the list.)  
Backing Up Within a Menu  
To go to the previous menu:  
Press Back.  
To return to the standby mode:  
Press Exit or  
.
Section 2E: Navigating Through Menus  
62  
       
Viewing the Menus  
Menu Diagram  
The following list outlines your phone’s menu structure.  
Call logs  
Messaging  
Pictures  
Downloads  
Organizer  
Profiles  
Settings  
Radio  
Web  
Keyguard  
Here are the main menus and their associated sub-menus:  
Call logs  
Outgoing calls  
Call time  
Send message  
View number  
Use number  
Save  
Add to contact  
Delete  
Call  
Incoming calls  
Call time  
Send message  
View number  
Use number  
Save  
Add to contact  
Delete  
Call  
Missed calls  
Call time  
Send message  
View number  
Use number  
Save  
Add to contact  
Delete  
Call  
Delete call logs  
All  
Missed  
Incoming  
Outgoing  
Section 2E: Navigating Through Menus  
63  
       
Messaging  
Create text message  
Add number  
Add e-mail  
Add list  
Enter text  
List recipients  
Send  
Create Picture Mail  
Messages  
Inbox  
Sent items  
Archive  
Templates  
My folders  
Distribution lists  
Delete messages  
Message settings  
Voicemail msgs.  
Listen to voicemail messages  
Clear new voicemail icon  
E-mail  
Pictures  
Camera  
Take picture  
Capture  
Self timer  
Open my pictures  
Expand  
Send  
Upload  
Upload all  
Delete  
Delete all  
Change caption  
Add to contact  
Set as wallpaper  
Details  
My pictures  
Stored in camera  
Saved to phone  
Online albums  
View online albums  
Upload from camera  
Settings  
Image quality  
Camera shutter sound  
Default caption  
Account info  
Downloads  
Screen savers  
Get new  
Section 2E: Navigating Through Menus  
64  
 
(various graphics)  
View  
Delete  
Set as wallpaper  
Details  
Sort  
Ringers  
Get new  
(various tones)  
Play  
Delete  
Set as ring tone  
Details  
Sort  
Games  
Get new  
(various games)  
Play  
Delete  
Data access  
Details  
Sort  
Applications  
Get new  
(various applications)  
Run  
Delete  
Data access  
Details  
Sort  
Other  
Get new  
Memory  
Organizer  
Alarm clock  
Alarm time  
Alarm tone  
Calendar  
View day  
Week view  
Make a note  
Meeting  
Call  
Birthday  
Memo  
Reminder  
Go to date  
Settings  
Go to to-do list  
To-do list  
View  
Add  
Delete  
Sort by deadline  
Section 2E: Navigating Through Menus  
65  
 
Send  
Go to calendar  
Save to calendar  
Voice recorder  
Record  
Recordings list  
Calculator  
Exchange rate  
(various math operations)  
Countdown timer  
Stopwatch  
Split timing  
Lap timing  
Calorie calculator  
Activities  
Settings  
Delete all  
Profiles  
Normal  
Activate  
Customize  
Incoming call alert  
Ringing tone  
Ringing volume  
Vibrating alert  
Message alert tone  
Keypad tones  
Warning tones  
Alert for  
Timed  
Silent  
Activate  
Customize  
Incoming call alert  
Ringing tone  
Ringing volume  
Vibrating alert  
Message alert tone  
Keypad tones  
Warning tones  
Alert for  
Profile name  
Timed  
Meeting  
Activate  
Customize  
Incoming call alert  
Ringing tone  
Ringing volume  
Vibrating alert  
Message alert tone  
Keypad tones  
Warning tones  
Alert for  
Section 2E: Navigating Through Menus  
66  
 
Profile name  
Timed  
Outdoor  
Activate  
Customize  
Incoming call alert  
Ringing tone  
Ringing volume  
Vibrating alert  
Message alert tone  
Keypad tones  
Warning tones  
Alert for  
Profile name  
Timed  
Pager  
Activate  
Customize  
Incoming call alert  
Ringing tone  
Ringing volume  
Vibrating alert  
Message alert tone  
Keypad tones  
Warning tones  
Alert for  
Profile name  
Timed  
Settings  
Voice commands  
Profiles  
Normal  
Silent  
Meeting  
Outdoor  
Pager  
Voicemail  
Call voicemail  
Radio  
Radio on  
Radio off  
Next channel  
Previous channel  
Infrared  
Activate infrared  
Voice recorder  
Record  
Call logs  
Missed calls  
Received calls  
Right selection key settings  
Select options  
(various actions assigned to the key)  
Organize  
Section 2E: Navigating Through Menus  
67  
 
Contacts  
Call settings  
Location info sharing  
911 only  
On  
Anykey answer  
Automatic redial  
Speed dialing  
Calling card  
None  
Card A  
Card B  
Card C  
Card D  
Call summary  
Phone settings  
Phone language  
Automatic keyguard  
Touch tones  
Welcome note  
Help text activation  
Display settings  
Wallpaper  
Color schemes  
Banner  
Display brightness  
Screen saver timeout  
Backlight timeout  
Time settings  
Clock  
Date  
Auto-update of date & time  
Tone settings  
Incoming call alert  
Ringing tone  
Ringing volume  
Vibrating alert  
Message alert tone  
Keypad tones  
Warning tones  
Alert for  
All calls  
Family  
VIP  
Friends  
Business  
Other  
Phone details  
User details  
Version details  
System details  
Game settings  
Game sounds  
Game lights  
Shakes  
Section 2E: Navigating Through Menus  
68  
Enhancement settings  
Headset  
Loopset  
TTY/TDD  
Charger  
Security settings  
Phone lock  
Allowed nos. when phone locked  
Change lock code  
Call restrictions  
Restrict outgoing calls  
Restrict incoming calls  
Lock pictures  
Reset camera  
Network services  
Call forwarding  
Network feature setting  
Roaming  
Set mode  
Sprint  
Automatic  
Analog only  
Call guard  
Roam call ringing tone  
Service change tones  
PCS Vision  
Enable/Disable PCS Vision  
Net guard  
Update settings  
Infrared  
Restore factory settings  
Radio  
Turn off  
Save channel  
Automatic tuning  
Manual tuning  
Set frequency  
Delete channel  
Speakerphone  
Stereo output  
Web  
Keyguard  
Section 2E: Navigating Through Menus  
69  
     
Reviewing the Contacts Menu  
Contacts Menu Diagram  
The Contacts menu contains your internal Phone Book entries and  
lets you add, delete, and customize entries according to your  
personal preferences. The following outline shows your phone’s  
complete Contacts menu structure:  
Search  
Add New  
Edit name  
Delete  
Add number  
Settings  
Speed dials  
Voice tags  
My phone no.  
Caller groups  
Here is the Contacts menu and its associated submenus:  
Contacts  
Search  
Add new  
Add voice tag  
Edit number  
Delete number  
Use number  
View  
Change type  
General  
Mobile  
Home  
Work  
Fax  
As primary number  
Add number  
General  
Mobile  
Home  
Work  
Fax  
Add detail  
E-mail address  
Web address  
Street address  
Note  
Add image  
Caller groups  
Section 2E: Navigating Through Menus  
70  
   
No group  
Family  
VIP  
Friends  
Business  
Other  
Custom tone  
(various ringing tones)  
Send bus. card  
Send message  
Speed dial  
Edit name  
View name  
Delete  
Edit name  
Delete  
One by one  
Delete all  
Add number  
Add  
General  
Mobile  
Home  
Work  
Fax  
Settings  
Scrolling view  
Name list  
Name and number  
Name andimage  
Memory status  
Speed dials  
Voice tags  
My phone no.  
Caller groups  
Family  
Rename group  
Group ringing tone  
Group logo  
On  
Off  
View  
Group members  
Remove contact  
Add contact  
VIP  
Rename group  
Group ringing tone  
Group logo  
On  
Off  
View  
Group members  
Remove contact  
Add contact  
Section 2E: Navigating Through Menus  
71  
Friends  
Rename group  
Group ringing tone  
Group logo  
On  
Off  
View  
Group members  
Remove contact  
Add contact  
Business  
Rename group  
Group ringing tone  
Group logo  
On  
Off  
View  
Group members  
Remove contact  
Add contact  
Other  
Rename group  
Group ringing tone  
Group logo  
On  
Off  
View  
Group members  
Remove contact  
Add contact  
Section 2E: Navigating Through Menus  
72  
Section 2F  
Managing Call Logs  
In This Section  
T he Call Logs keeps track of incoming calls, calls made from your  
PCS Vision Phone, and missed calls. This section guides you through  
accessing and making the most of your Call Logs.  
Section 2F: Managing Call History  
73  
 
Viewing Call Logs  
You’ll find the Call Logs feature very helpful. It is a list of the last  
20 phone numbers (or Phone Book entries) for calls you placed,  
accepted, or missed. Call Logs makes redialing a number fast and easy.  
It is continually updated as new numbers are added to the beginning  
of the list and the oldest entries are removed from the bottom of the  
list. Your phone must be turned on and be in the Sprint Nationwide  
PCS Network in order to display the most recent missed calls.  
Each entry contains the phone number (if it is available) and Phone  
Book entry name (if the phone number is in your Phone Book).  
Duplicate calls (same number and type of call) may only appear  
once on the list.  
To view a Call Logs entry:  
1. Press Menu, scroll to Call logs, and press Select.  
2. Scroll to Outgoing calls, Incoming calls, or Missed calls and  
press Select.  
To access the phone main menu, press Menu from the standby mode.  
Menu items may be selected by highlighting them with the navigation  
key and pressing Select.  
Note:  
Call Logs Options  
For additional information and options on a particular call, highlight  
a Call Logs entry and press Options. This feature gives you the  
following options for each number you select:  
Call time  
Send message  
View number  
Use number  
Save  
Add to contact  
Delete  
Call  
An option can be chosen by pressing Select.  
Section 2F: Managing Call History  
74  
       
Making a Call From Call Logs  
To place a call from Call Logs:  
1. Press Menu, scroll to Call logs, and press Select.  
2. Scroll to an option (for example, Missed calls) and press Select.  
3. Scroll to the number you wish to call and press  
.
You cannot make calls from Call Logs to entries identified as No ID or Restricted.  
Note:  
Saving a Phone Number From Call Logs  
Your PCS Phone can store up to 500 Phone Book entries, with up to  
5 numbers for each entry. That’s up to a total of 2500 numbers.  
To save a phone number from Call Logs:  
1. Press Menu, scroll to Call logs, and press Select.  
2. Scroll to the category you wish to view (for example, Outgoing  
calls) and press Select.  
3. Scroll to the number you wish to save and press Options.  
4. Scroll to Save and press Select.  
5. Enter the contact name you wish to assign to this number and  
press OK.  
After you have saved the number, the new Phone Book entry is  
You cannot save phone numbers already in your Phone Book or from  
calls identified as No ID or Restricted.  
Note:  
Section 2F: Managing Call History  
75  
       
Prepending a Phone Number From Call Logs  
If you need to make a call from Call Logs and you happen to be  
outside your local area code, you can add the appropriate prefix by  
prepending the number.  
To prepend a phone number from Call Logs:  
1. Press Menu, scroll to Call logs, and press Select.  
2. Scroll to the category that contains the number (for example,  
Outgoing calls) and press Select.  
3. Scroll to the number you want to use and press Options.  
4. Scroll to Use number and press Select.  
5. Use the left navigation key  
to place the cursor in front of the  
phone number. (Use Clear to remove numbers, if necessary.)  
6. Add the required prefix numbers and press  
.
Erasing Call Logs  
To erase Call Logs:  
1. Press Menu, scroll to Call logs, and press Select.  
2. Scroll to Delete call logs and press Select.  
3. Scroll to the option you prefer (All, Missed, Incoming, or  
Outgoing) and press Select.  
This action cannot be undone.  
Note:  
Section 2F: Managing Call History  
76  
       
Section 2G  
Using the Phone Book  
In This Section  
Now that you know the basics that make it easier to stay in touch with  
people and information, you’re ready to explore your phone’s more  
advanced features. This section explains how to use your phone’s  
Phone Book and helps you make the most of your contacts and time  
when you are trying to connect with the important people in your life.  
Section 2G: Using the Phone Book  
77  
   
Adding a New Phone Book Entry  
Your PCS Phone can store up to 500 Phone Book entries, with up to  
5 numbers for each entry. That’s up to a total of 2500 numbers. Each  
entry’s name can contain up to 32 characters.  
To add a new entry:  
1. Press Contacts, scroll to Add new, and press Select.  
2. Enter the name of the new contact and press OK.  
3. Enter the number of the new contact and press OK.  
4. Either press Options to modify this contact or press Done.  
When recording Voice Dial tags, do it in a quiet environment and without  
the aid of an accessory (for example, a headset or hands-free car kit).  
Note:  
After you have saved the number, the new Phone Book entry is  
Section 2G: Using the Phone Book  
78  
   
Finding Phone Book Entries  
There are several ways to display your Phone Book entries: by name,  
by speed dial number, by group, and by voice dial tags. Follow the  
steps outlined in the sections below to display entries from the  
Phone Book menu.  
Finding Names  
To find Phone Book entries by name:  
1. Press Contacts, scroll to Search, and press Select.  
2. Enter the first letter, or first letters, and scroll down to find the  
contact you seek.  
- or -  
Press  
and scroll through the list of contacts in the  
Phone Book.  
Finding Speed Dial Numbers  
To find phone numbers you have stored in speed dial locations:  
1. Press Contacts, scroll to Speed dials, and press Select.  
2. Scroll up or down to view speed dial contacts.  
Finding Group Entries  
To find entries designated as part of a group:  
1. Press Contacts, scroll to Caller groups, and press Select.  
2. Scroll to a caller group (for example, Friends) and press Select.  
3. Scroll to Group members and press Select.  
Finding Voice Dial Numbers  
To find phone numbers you have stored in Voice Dial:  
1. Press Contacts, scroll to Voice tags, and press Select.  
2. Scroll through the list.  
Section 2G: Using the Phone Book  
79  
   
Phone Book Entry Options  
To access the Phone Book entry options, display the entry, press  
Details, and press Options. To choose an option, highlight it and  
press Select.  
Add voice tag/Voice tag. Create or change a voice tag for voice  
dialing the contact.  
Edit number. Edit the contact number.  
Delete number. Delete the contact number.  
Use number. Press Select and  
to dial the number.  
View. View the contact information.  
Change type. Change a phone number category (for example,  
from Mobile to Home.)  
As primary number. Select one number to be the number  
displayed in the Phone Book listing.  
Add number. Add another number to an existing contact.  
Add detail. Add a note, street address, or other information.  
Add image. Assign an image to a contact.  
Caller groups. Assign this contact to a caller group.  
Custom tone. Select a tone that plays when this contact calls.  
Send bus. card. Send this contact’s information using infrared or  
text message.  
Send message. Send a text message to this contact.  
Speed dial. Assign speed dialing to this contact.  
Edit name. Edit this contact name.  
View name. View the contact name.  
Delete. Delete the contact.  
You can view the next entry by pressing the navigation key down or view  
the previous entry by pressing the navigation key up.  
Tip:  
Section 2G: Using the Phone Book  
80  
     
AddingaPhoneNumbertoaPhoneBookEntry  
To add a phone number to an entry:  
1. Press Contacts, scroll to Add number, and press Select.  
2. Scroll to the name you wish to modify and press Add.  
3. Scroll to the category to which you want to add the number  
and press Select.  
4. Enter the number and press OK.  
5. Press Done.  
Editing a Phone Book Entry’s Phone Number  
To edit an entry’s phone number:  
1. Press the down scroll key to view your Contacts list, scroll to  
the contact you wish to modify, and press Details.  
2. Scroll to the number you wish to modify and press Options.  
3. Scroll to Edit number and press Select.  
4. Press Clear to delete digits, or press and hold Clear to  
completely delete the number.  
5. Enter the new number and press OK.  
You can select which phone number is shown as the primary phone  
number (default) for the contact.  
To select a phone number as the primary number:  
1. Press  
to view your Contacts list, scroll to the contact you  
wish to modify, and press Details.  
2. Scroll to the number you wish to modify and press Options.  
3. Scroll to As primary number and press Select. (The selected  
number will now be the one shown in the Contacts listing.)  
Section 2G: Using the Phone Book  
81  
       
Assigning Speed Dial Numbers  
Your phone can store phone numbers in speed dial locations for  
keys 2–9. For details on how to make calls using speed dial numbers,  
Speed dial numbers can be assigned when you add a new Phone  
Book entry, when you add a new phone number to an existing entry,  
or when you edit an existing number.  
To assign a Speed Dial number to a new phone number:  
1. Press Contacts, scroll to Speed dials, and press Select.  
2. Scroll to a key assignment and press Assign.  
3. Enter the phone number and press OK.  
4. Enter a contact name and press OK. (A message confirms the  
assigned key.)  
To assign a Speed Dial number to an existing phone number:  
1. Press Contacts, scroll to Speed dials, and press Select.  
2. Scroll to a key assignment and press Assign.  
3. Press Search, scroll to the contact and phone number to which  
to want to add a speed dial number, press Select, then press  
Select again.  
4. Press  
to return to the standby mode.  
To change a Speed Dial assignment:  
1. Press Contacts, scroll to Speed dials, and press Select.  
2. Scroll to a key assignment and press Options.  
3. Scroll to Change and press Select.  
4. Press Search, scroll to the new contact and phone number,  
press Select, and press Select again. (This contact is now  
assigned to the selected speed dial key.  
5. Press  
to return to the standby mode.  
Section 2G: Using the Phone Book  
82  
     
Editing a Phone Book Entry  
To make changes to an entry:  
1. Press  
to view your Contacts list.  
2. Scroll to the name you wish to edit and press Details.  
3. Press Options, scroll to an option, and press Select.  
4. Complete your editing changes and press OK.  
Selecting a Ringer Type for an Entry  
You can assign a ringer type to a Phone Book entry so you can  
identify the caller by the ringer type. (Refer to “Ringer Types” on  
page 36.)  
To select a ringer type for an entry:  
1. In the Contacts list, scroll to a contact, and press Details.  
2. Press Options, scroll to Custom tone, and press Select.  
3. Use your navigation key to scroll through available ringers.  
(When you highlight a ringer type, a sample ringer will sound.)  
4. Highlight your desired ringer and press Select.  
Dialing PCS Services  
Your Phone Book may be preprogrammed with contact numbers for  
various PCS Services.You must be in digital mode to access  
PCS Services.  
To dial a service:  
1. Press  
2. Scroll to Services, Customer Solutions, Directory, or  
Account Info, and press to dial the number.  
to view your Contacts list.  
If your phone does not have preprogrammed numbers, you can call  
1-888-211-4PCS (4727).  
Section 2G: Using the Phone Book  
83  
         
Section 2H  
Personal Organizer  
In This Section  
Your PCS Vision Phone is equipped with several personal information  
management features that help you manage your busy lifestyle. This  
section shows you how to use these features to turn your phone into a  
time management planner that helps you keep up with your contacts,  
schedules, and commitments. It takes productivity to a whole new level.  
Section 2H: Personal Organizer  
84  
   
Using the Alarm Clock  
The alarm clock feature lets you set an important time and alert you  
when the set time occurs.  
To set the alarm clock:  
1. From the main screen, press Menu, scroll to Organizer, and  
press Select.  
2. Scroll to Alarm clock and press Select.  
3. Scroll to Alarm time and press Select.  
4. Enter the desired alarm time using the keypad or navigation  
key and press OK.  
5. Scroll to am or pm and press Select. (When the alarm occurs,  
you will be alerted with the tone you selected and with a  
message on the screen. When the alarm occurs, you have the  
option of selecting Stop or Snooze. If you press Snooze, the  
alarm will sound again later.)  
Section 2H: Personal Organizer  
85  
   
Using the Calendar  
Going to Today’s Calendar Menu  
To go to the Calendar menu for today’s date:  
1. From the main screen, press Menu, scroll to Organizer, and  
press Select.  
2. Scroll to Calendar and press Select. (When the calendar is  
displayed, today’s date is automatically highlighted.)  
Adding an Event to the Calendar  
Your Calendar helps organize your time and reminds you of  
important events.  
To add an event:  
1. From the main screen, press Menu, scroll to Organizer, and  
press Select.  
2. Scroll to Calendar and press Select.  
3. Scroll to the day you wish to view and press Options.  
4. Scroll down to Make a note and press Select.  
5. Scroll to Meeting, Call, Birthday, Memo, or Reminder, and  
press Select.  
6. Type your reminder and press Options.  
7. Follow the remaining prompts.  
8. Press  
to return to the standby mode.  
You can use predictive text input to make text input quicker and easier.  
Tip:  
To access the phone’s main menu, press Menu from the standby mode.  
Menu items may be selected by highlighting them with the navigation  
key and pressing Select.  
Note:  
Section 2H: Personal Organizer  
86  
         
Event Alerts  
There are several ways your PCS Phone alerts you of scheduled events:  
By displaying an alert message.  
By playing a tone.  
By flashing the backlight and keypad lights.  
Event Alert Menu  
If you have an event alarm scheduled, your phone alerts you and  
displays the event reminder. To silence the alarm and reset the  
schedule, press  
. To view additional options, select the  
appropriate softkey.  
View (left selection key) displays the event detail screen.  
Snooze (right selection key) silences the alarm and schedules it  
to realarm again in 10 minutes.  
Viewing Events  
To view your scheduled events:  
1. From the main screen, press Menu, scroll to Organizer, and  
press Select.  
2. Scroll to Calendar and press Select.  
3. Scroll to the day you wish to view and press Options.  
4. Scroll to View day and press Select.  
5. To modify this event, press Options, scroll to Edit, press Select,  
and follow the prompts.  
6. Press  
to return to the standby mode.  
Section 2H: Personal Organizer  
87  
     
Erasing Events  
You can delete a specific event in the calendar.  
To delete an event:  
1. From the main screen, press Menu, scroll to Organizer, and  
press Select.  
2. Scroll to Calendar and press Select.  
3. Scroll to the day you wish to view and press Options.  
4. Scroll to View day and press Select.  
5. Select the event you wish to delete and press Options.  
6. Scroll to Delete and press Select.  
7. Press OK to confirm your decision.  
You can set your calendar to automatically delete events that  
occurred in the past.  
To delete events scheduled in the past:  
1. From the main screen, press Menu, scroll to Organizer, and  
press Select.  
2. Scroll to Calendar and press Select.  
3. Press Options, scroll to Settings, and press Select.  
4. Scroll to Auto-delete and press Select.  
5. Scroll to After 1 day, After 1 week, or After 1 month, and  
press Select.  
Section 2H: Personal Organizer  
88  
 
Using the To-do List  
Your PCS Phone comes with a to-do list you can use to compose and  
store reminders and notes to help keep you organized.  
Adding a To-do Activity  
To add an activity:  
1. From the Organizer menu, scroll to To-do list and press Select.  
2. Press Options, scroll to Add, press Select, and enter text about  
the activity using the keypad.  
3. Press Options, scroll to Save, and press Select.  
4. Scroll to choose a priority and press Select.  
Viewing and Editing a To-do Activity  
To view and edit an activity:  
1. From the Organizer menu, scroll to To-do list and press Select. (If  
there are no activities to view, (no notes)” is displayed.  
2. Scroll to choose the activity to view and press Options.  
3. Scroll to View and press Select.  
4. To edit the activity, press Options, scroll to Edit, press Select,  
and modify the text of the activity.  
5. Press Options, scroll to Save, and press Select.  
Deleting a To-do Activity  
To delete an activity:  
1. From the Organizer menu, scroll to To-do list and press Select. (If  
there are no activities to view, (no notes)” is displayed.  
2. Scroll to choose the activity to view and press Options.  
3. Scroll to Delete and press Select.  
4. Press OK to confirm your decision.  
Section 2H: Personal Organizer  
89  
         
Using Voice Memos  
The microphone in your phone can be used to record speech for  
playback at a later time. This is an easy way to create voice  
reminders to yourself.  
Your phone can store up to 3 minutes of voice memos.  
Note:  
Recording a Voice Memo  
To record a memo:  
1. Press Menu, scroll to Organizer, and press Select.  
2. Scroll to Voice recorder and press Select.  
3. Scroll to Record and press Select.  
4. Record your voice memo, then press Stop.  
5. Enter the text for your recording and press OK.  
Playing a Voice Memo  
To play the voice memos you have recorded:  
1. Press Menu, scroll to Organizer, and press Select.  
2. Scroll to Voice recorder and press Select.  
3. Scroll to Recordings list and press Select.  
4. Scroll to the voice memo you wish to hear, press Options, scroll  
to Playback, and press Select.  
Section 2H: Personal Organizer  
90  
           
Adding an Alarm to a Voice Memo  
To add an alarm to remind you of a voice memo:  
1. Press Menu, scroll to Organizer, and press Select.  
2. Scroll to Voice recorder and press Select.  
3. Scroll to Recordings list and press Select.  
4. Scroll to the voice memo you to which you want to add an  
alarm, press Options, scroll to Add Alarm, and press Select.  
5. Set the alarm date using the keypad and the 4-way scroll key,  
then press OK. (The date format is dd.mm.yyyy.)  
6. Set the alarm time using the keypad and the 4-way scroll key,  
then press OK. (The time format is hh.mm.)  
7. Scroll to am or pm and press OK. (The  
icon next to the  
memo name in the Recordings list indicates that an alarm is  
attached to that voice memo.)  
Listening to an Alarmed Voice Memo  
To listen to your alarmed memo:  
1. When the voice memo alarm sounds, press Stop to stop the  
alarm. (A message is displayed showing you the alarm time and  
the text of the voice memo.)  
2. Press Play to hear the memo.  
3. Press Exit to dismiss the memo. (The memo will stay in the  
Recordings list, even though its time has expired.)  
Erasing Recorded Voice Memos  
To erase recorded memos:  
1. Press Menu, scroll to Organizer, and press Select.  
2. Scroll to Voice recorder and press Select.  
3. Scroll to Recordings list and press Select.  
4. Scroll to the voice memo you wish to erase, press Options,  
scroll to Delete, and press Select.  
5. Press OK to confirm that you want to erase the voice memo.  
When you erase your last memo, the message “(empty)” appears.  
Note:  
Section 2H: Personal Organizer  
91  
         
Using the Calculator  
Your phone comes with a built-in calculator and can store one  
currency exchange rate.  
To use the calculator:  
1. From the Organizer menu, scroll to Calculator and press Select.  
2. Use the keypad to enter numbers. (Press  
to enter a decimal point.)  
3. Press once to add, twice to subtract, three times to multiply,  
and four times to divide. (The sign appears above Options.)  
– or –  
Press Options, scroll to the function you want, and press Select.  
(For example, to subtract 3 from 7, press  
, press  
twice  
to subtract, press , press Options, scroll to Equals, and  
press Select. The answer, 4, is displayed above the Clear key.)  
4. Press and hold the Clear key to clear the screen before  
beginning a new calculation.  
This calculator has a limited accuracy and rounding errors may occur,  
especially in long divisions.  
Note:  
To convert currencies:  
1. From the Organizer menu, scroll to Calculator, press Select, press  
Options, scroll to Exchange rate, and press Select.  
2. Scroll to Home units in foreign units, press Select, enter the  
amount of foreign currency equivalent to one local currency  
(for example, one dollar for XX pesos), and press OK. (Press  
to enter a decimal point.)  
- or -  
Scroll to Foreign units in home units, press Select, enter the  
amount of local currency equivalent to one foreign currency  
(for example, one peso for XX dollars), and press OK.  
3. Enter the amount of money you want to convert using your  
keypad, press Options, scroll to either To home or To foreign  
(whichever is appropriate), and press Select. (Your phone  
displays the conversion answer.)  
Section 2H: Personal Organizer  
92  
       
Using the Countdown Timer Alarm  
To use the countdown timer:  
1. From the Organizer menu, scroll to Countdown timer and  
press Select.  
2. Set the alarm time to count down by using the keypad and the  
4-way scroll key, then press OK. (The format is hh.mm.)  
3. Enter a note that describes the timer alarm.  
4. When the timer alarm sounds (a message is displayed showing  
you the alarm note), press OK to dismiss the alarm.  
Section 2H: Personal Organizer  
93  
     
Using the Stopwatch  
The stopwatch has two timing modes; split timing and lap timing.  
Using the stopwatch consumes the battery and the phone’s operating  
time will be reduced. Be careful not to let it run in the background when  
performing other operations with your phone.  
Note:  
Split Timing  
Split timing allows you to use the stopwatch to measure total  
elapsed time while also measuring the elapsed time at intervals that  
began at the start of an event. The most recent split time is shown  
on the line below the total elapsed time.  
To measure split times:  
1. From the Organizer menu, scroll to Stopwatch and  
press Select.  
2. Scroll to Split timing and press Select.  
3. Press Start to start the stopwatch. (The elapsed time from the start  
of the event is displayed.)  
4. Press Split to start timing the next interval. (The top line of the  
display shows the total elapsed time from the start of the event.  
The second line shows the elapsed time from the start of the  
event to when Split was last pressed. Pressing Split again starts a  
new interval.)  
5. Press Stop to stop the stopwatch.  
6. Press Options, scroll to Start, Save, or Reset, and press Select. (If  
Save is selected, enter a name for the event in the text box and  
press OK.)  
Section 2H: Personal Organizer  
94  
         
Lap Timing  
Lap timing allows you to use the stopwatch to measure total elapsed  
time while also measuring each individual lap. The last recorded lap  
is shown on the line below the total time.  
To measure lap times:  
1. From the Organizer menu, scroll to Stopwatch and press Select.  
2. Scroll to Lap timing and press Select.  
3. Press Start to start the stopwatch. (The time from the start of the  
lap is displayed.)  
4. Press Lap to stop timing the first lap and start timing the next lap.  
(The top line of the display shows the elapsed time for the current  
lap. The second line shows the time for the last lap. Pressing Lap  
again stops timing the last lap and starts timing a new lap.)  
5. Press Stop to stop the stopwatch. (The top line of the display  
switches from showing the current lap time to showing the total  
time of all laps.  
6. Press Options, scroll to Start, Save, or Reset, and press Select. (If  
Save is selected, enter a name for the event in the text box and  
press OK.)  
Section 2H: Personal Organizer  
95  
   
Using the Calorie Calculator  
The calorie calculator helps you keep track of the calories you eat  
and the calories you burn during activities. The calculations are  
based on your weight, age, and gender.  
Customizing the Calorie Calculator  
To customize your calorie calculator:  
1. From the Organizer menu, scroll to Calorie calculator, and  
press Select.  
2. Scroll to Settings and press Select.  
3. Scroll to Weight format and press Select.  
4. To enter your weight in pounds, scroll to lbs and press Select.  
- or -  
To enter your weight in kilograms, scroll to kg and press Select.  
5. Scroll to Calorie format and press Select.  
6. To enter food calories as kilocalories, scroll to kcal and press Select.  
- or -  
To enter food calories as kilojoules, scroll to kj and press Select.  
7. Scroll to Velocity format and press Select.  
8. To enter your speed as miles per hour, scroll to mph and  
press Select.  
- or -  
To enter your speed as kilometers per hour, scroll to km/h  
and press Select.  
9. Scroll to Gender and press Select.  
10. Scroll to Male or Female and press Select.  
11. Scroll to Weight, enter your weight, and press OK.  
12. Scroll to Age, enter your age, and press OK.  
Section 2H: Personal Organizer  
96  
     
Customizing an Activity  
To customize an activity:  
1. From the Calorie calculator, press Select, scroll to Activities,  
and press Select. (If none have been selected before,  
(empty)” is displayed.)  
2. Press Add new to add an activity to the list.  
3. Scroll to Aerobics (or another activity) and press Select.  
4. Scroll to select Light, Moderate, or Heavy intensity, and  
press Select.  
5. Set the duration of the activity by using the keypad and the  
4-way scroll key. (The time format is hh.mm.)  
6. Press OK. (The display shows the energy used during the  
activity and other information.)  
7. Press OK to add this activity to your personal list.  
Section 2H: Personal Organizer  
97  
 
Section 2I  
Using Your Phone’s Voice Services  
In This Section  
Your PCS Vision Phone’s Voice Services let you place calls using your  
voice, store voice reminders, and record memos right on your phone.  
This section includes easy-to-follow instructions on using voice-  
activated dialing and managing voice memos.  
Section 2I: Using Your Phone’s Voice Services  
98  
 
Using Voice-Activated Dialing  
In addition to PCS Voice CommandSM (see page 177), you can use a  
voice dial tag to automatically dial a phone number in your Phone  
Book. (A voice dial tag is a command you record and use to place  
calls without using the keypad.) Your phone can store up to  
25 voice dial tags. (To create a voice dial tag, see “Adding a New  
Voice tags are sensitive to background noise. Record them and make  
calls in a quiet environment. When recording a voice tag or making a  
call by saying a voice tag, hold the phone in the normal position  
near your ear. Very short names are not accepted. Use long names  
and avoid similar names for different numbers.  
You must say a voice command exactly as you did when you recorded it. This  
may be difficult in, for example, a noisy environment or during an emergency.  
You should not rely solely upon voice dialing in all circumstances.  
Note:  
Assigning a Voice Tag to a Phone Number  
To use voice-activated dialing, you must first assign a voice  
command (voice tag) to the number you wish to call.  
To assign a voice tag to a phone number:  
1. Press the down scroll key  
to display your Contacts list.  
2. Scroll to the contact to which you wish to assign a voice  
command and press Details. (The phone number associated  
with this contact is displayed.)  
3. Press Options, scroll to Add voice tag, and press Select.  
4. Press Start and speak the command clearly, as though you were  
speaking normally into the phone (for example, “Call Bill”).  
(The voice command icon  
is displayed.)  
5. Press Options to assign other features to this contact, or press  
to return to the standby mode.  
Be sure to record your voice comands in a quiet environment and without the  
aid of accessories (hands-free device) to avoid capturing unwanted sounds.  
Unwanted sounds may cause your phone not to recognize your command  
when you attempt to use voice dialing.  
Note:  
Section 2I: Using Your Phone’s Voice Services  
99  
       
Making a Call Using Voice-Activated Dialing  
To use a voice dial tag to call a phone number:  
1. Press and hold Contacts for two seconds. (“Speak now” is  
displayed on your screen, followed by a short tone.)  
2. Speak the voice command into your phone’s microphone as  
you originally assigned it. (When your phone recognizes the  
command, it replays your command and automatically dials  
the number.)  
Never attempt to use voice-activated dialing to place emergency  
(911) calls. During an emergency, the tone of your voice may be  
affected and unrecognized by your phone.  
Warning!  
Changing the Voice Dial Setup  
To change the voice dial setting for your phone:  
1. Press Contacts, scroll to Voice tags, and press Select.  
2. Scroll to an existing contact and press Options.  
3. Scroll to Change and press Select.  
4. Press Start and speak into the microphone.  
.
When you are finished speaking your voice tag, do not press Quit or your  
message will be erased.  
Note:  
Erasing a Voice Dial Tag  
To erase a voice tag:  
1. Press Contacts, scroll to Voice tags, and press Select.  
2. Scroll to an existing contact and press Options.  
3. Scroll to Delete and press Select.  
4. Press OK to confirm your choice.  
Section 2I: Using Your Phone’s Voice Services  
100  
       
Managing Voice Memos  
You can use your phone’s Voice Services to record brief memos to  
remind you of important events, phone numbers, or grocery list items.  
For more information on voice memos, see “Using Voice Memos”  
Recording Voice Memos  
To record a voice memo:  
1. Press Menu, scroll to Organizer, and press Select.  
2. Scroll to Voice recorder and press Select.  
3. Scroll to Record and press Select.  
4. Record your voice memo, then press Stop.  
5. Enter the text for your recording and press OK.  
Your phone can store up to three minutes of memos.  
Note:  
Playing a Voice Memo  
To play the voice memos you have recorded:  
1. Press Menu, scroll to Organizer, and press Select.  
2. Scroll to Voice recorder and press Select.  
3. Scroll to Recordings list and press Select.  
4. Scroll to the voice memo you wish to hear, press Options, scroll  
to Playback, and press Select.  
Section 2I: Using Your Phone’s Voice Services  
101  
           
Section 2J  
Using Your Phone’s Built-in Camera  
In This Section  
Your PCS Vision Picture Phone’s built-in camera gives you the ability to  
take full-color digital pictures, view your pictures using the phone’s  
display, and instantly share them with your family and friends. It’s fun and  
as easy to use as a traditional point-and-click camera: just take a  
picture, view it on your phone’s display, and send it from your phone  
to up to ten people at a time.  
This section explains the features and options of your PCS Vision  
Picture Phone’s built-in camera.  
Section 2J: Using Your Phone’s Built-in Camera  
102  
     
Taking Pictures  
Taking pictures with your phone’s built-in camera is as simple as  
choosing a subject, pointing the lens, and pressing a button.  
To take a picture:  
1. From the standby mode, press Menu, scroll to Pictures, and  
press Select.  
2. Scroll to Camera, scroll to Take picture, and press Select.  
Instead of steps 1 and 2 above, press  
.
Shortcut:  
3. Using the phone’s display screen as a viewfinder, aim the  
camera lens at your subject.  
Take the  
picture  
Return to the  
previous menu  
4. Hold the camera steady. Press Capture to take the picture. (The  
photo is automatically saved in the Stored in camera album of the  
My pictures submenu of the Pictures menu. Once you have taken  
a picture, you will be able to share or upload the picture.)  
Use a soft, clean, dry cloth to clean the camera lens. Do not direct the  
camera at the sun or fluorescent lights.  
Note:  
Note:  
When using the features of this device, obey all laws and respect the  
privacy and legitimate rights of others.  
Section 2J: Using Your Phone’s Built-in Camera  
103  
   
5. Press Options to display the list of options:  
Send. Create and send Picture Mail.  
Upload. Upload a single picture to the Picture Mail Website.  
Upload all. Upload all pictures to the Picture Mail Website.  
Delete. Delete a single picture.  
Open my pictures. Open the My pictures album.  
Change caption. Change a picture’s name.  
Add to contact. Attach the picture to a contact in your  
Contacts list.  
Set as wallpaper. Set the picture as a background for your  
standby screen.  
Details. Display the picture size (memory used), the date it  
was captured, the date and time it was uploaded, and its  
resolution (pixel size).  
6. To delete the photo, scroll to Delete, press Select, and press OK  
to confirm your choice.  
Section 2J: Using Your Phone’s Built-in Camera  
104  
Creating Your Picture Mail Password  
The first time you use any of the Picture Mail management options  
involving the Picture Mail Website, you will need to establish a  
Picture Mail password through your PCS Vision Picture Phone. This  
password will also allow you to sign in to the Picture Mail Website at  
picturemail.sprintpcs.com to access and manage your uploaded pictures  
and albums.  
To create your Picture Mail password:  
1. From the standby mode, press Menu, scroll to Pictures, and  
press Select.  
2. Scroll to My pictures, scroll to Stored in camera, and press Select.  
(It may take a few seconds to display the pictures.)  
3. Scroll to a picture to select it and press Options.  
4. Scroll to Upload and press Select. (You may be prompted to  
create a pictures password.)  
If your PCS Service Plan does not include Picture Mail, you will first be  
prompted to subscribe to the service for an additional monthly charge.  
Note:  
5. Enter a four- to eight-digit password and press OK. (You will be  
prompted to confirm your password.)  
6. Please wait while the system creates your account.  
Write down your Picture Mail password in a secure place.  
Tip:  
Once you have received confirmation that your account has been  
successfully registered, you may upload and share pictures and  
access the Picture Mail Website.  
Section 2J: Using Your Phone’s Built-in Camera  
105  
   
Camera Mode Options  
Several camera mode options (settings) are available.  
To select a camera mode:  
1. From the standby mode, press Menu, scroll to Pictures, and  
press Select.  
2. Scroll to Settings, press Select, scroll to highlight a mode, and  
press Select.  
Image quality. Select High, Normal, or Basic quality images.  
(The higher the quality, the larger the file size, and the fewer  
pictures the camera can store.)  
Camera shutter sound. Select whether the shutter sound is  
On or Off.  
Default caption. Select Automatic to have the camera  
sequentially number your pictures, or select Custom caption  
to title your pictures yourself.  
Section 2J: Using Your Phone’s Built-in Camera  
106  
   
Setting the Self-timer  
To activate the Self-timer and get yourself in the picture:  
1. From the standby mode, press Menu, scroll to Pictures, and  
press Select.  
2. Scroll to Camera, press Select, scroll to Self-timer, and press  
Select. (A 10 second delay is set and shown in the top right  
corner of the display screen.)  
3. Using the phone’s display screen as a viewfinder, aim the  
camera lens at your subject.  
4. Press Start when you are ready to start the timer. (The time  
remaining is shown in the top right corner of the display screen.)  
5. Get ready for the picture. (When the timer reaches zero, the  
picture is taken automatically.)  
After taking a picture, the Self-timer remains active for more pictures.  
Returning to the main Camera menu cancels the Self-timer.  
Note:  
To cancel the Self-timer after it has started:  
Select Stop (right selection key).  
While the Self-timer is active, all keys are disabled except Stop and  
.
Note:  
Section 2J: Using Your Phone’s Built-in Camera  
107  
Sharing Picture Mail  
Once you’ve taken a picture, you can use the messaging capabilities  
of your PCS Vision Picture Phone to instantly share it with family and  
friends. You can send a picture to up to ten people at a time using  
their email addresses or their wireless phone numbers.  
Sharing Picture Mail  
To share Picture Mail:  
1. Select the picture you’d like to send, press Options, scroll to Send,  
and press Select.  
To review and share pictures from the Pictures menu, select My pictures,  
then select Stored in camera.  
Tip:  
2. Scroll to Add number and press Select.  
3. To select a recipient from your Contacts list, press Search, highlight a  
contact, press Select, and press OK.  
- or -  
Enter the recipient’s email address or wireless phone number and  
press OK.  
You may include up to ten recipients per Picture Mail, by repeating  
Step 2 and Step 3 above.  
Note:  
4. Scroll to highlight the recipient and press Options.  
5. If you wish to include a text message, scroll to Edit message,  
and press Select.  
To add a text message, use your keypad to enter the message  
and press Options when your message is completed.  
To insert a message using the templates, scroll to Use template,  
press Select, highlight a message, and press Select.  
To add an emoticon, scroll to Insert smiley, press Select,  
scroll to highlight a smiley, and press Insert.  
6. When your Picture Mail message is complete, press Options.  
7. Scroll to Send and press Select. (Your message will be sent.)  
Section 2J: Using Your Phone’s Built-in Camera  
108  
     
Although your message was sent, there is no certainty that it was  
received by the recipient. The service area, service conditions, phone  
features compatibility, and other factors may prevent your message  
from being received.  
Note:  
Sharing Picture Mail from Messaging  
You can also share your pictures from your phone’s Messaging menu.  
To share Picture Mail from the Messaging menu:  
1. Press Menu, scroll to Messaging, and press Select.  
2. Scroll to Create Picture Mail and press Select. (Pictures stored  
in your phone are displayed.)  
3. Scroll to select a picture, press Options, scroll to Insert, and  
press Select.  
4. To complete and send the Picture Mail, follow steps 2–7 in  
Section 2J: Using Your Phone’s Built-in Camera  
109  
 
Storing Pictures  
Your phone can store pictures in two areas:  
Stored in Camera (See “Stored in Camera” on page 110.)  
Stored in Camera  
Once a picture is taken, it is automatically saved to the  
Stored in Camera album. Your phone enters the Stored in Camera  
album from the My pictures menu. Once in the album, you can view  
all the pictures you have taken, send pictures to contacts, send  
pictures to the Picture Mail Website, delete images, and access  
additional picture options.  
From the Stored in Camera album, press Options (left selection  
key) to display the following options:  
Expand. Enlarge a picture to full screen size.  
Send. Create and send Picture Mail.  
Upload. Upload a single picture to the Picture Mail Website.  
Upload all. Upload all the pictures in the Stored in Camera  
album to the Picture Mail Website.  
Delete. Delete a single picture.  
Delete all. Delete all the pictures in the Stored in Camera album.  
Change caption. Change a picture’s name.  
Add to contact. Attach the picture to a contact in your  
Contacts list.  
Set as wallpaper. Set the picture as a background image for  
your standby screen.  
Details. Display the picture caption, its size (memory used),  
the date it was captured, the date and time it was uploaded,  
and its resolution (pixel size).  
Section 2J: Using Your Phone’s Built-in Camera  
110  
     
Online albums  
You can upload your pictures to your online Picture Mail account  
album for storing and sharing with others.  
To upload pictures from your camera to online albums:  
1. From the standby mode, press Menu, scroll to Pictures, and  
press Select.  
2. Scroll to My pictures, press Select, scroll to Stored in camera,  
and press Select.  
Stored in Camera Album  
Return to the  
previous menu  
List options  
3. Scroll to select the picture to upload, press Options, scroll to  
Upload, and press Select. (A message is displayed indicating the  
picture is being uploaded. Depending on your settings, you  
may be prompted to accept a PCS Vision connection.)  
Selecting Upload copies pictures from your phone’s Stored in camera  
album to your online Picture Mail account. Uploaded pictures are placed  
in the Uploads album. Pictures in your Stored in camera album and  
uploaded to your online Picture Mail album will remain available in the  
Stored in camera album until you erase them.  
Note:  
If this is the first time you have accessed the Picture Mail account, you  
will be prompted to create your Picture Mail password. (See “Creating  
Erasing pictures will free up memory space in your phone to enable you  
to take more pictures. Once erased, pictures cannot be uploaded to your  
online Picture Mail account.  
Note:  
Section 2J: Using Your Phone’s Built-in Camera  
111  
   
Managing Picture Mail  
Using the Picture Mail Website  
Once you have uploaded pictures from your phone to your online  
Picture Mail account (see “Online albums” on page 111), you can  
use your personal computer to manage your pictures. From the  
Picture Mail Website you can share pictures, edit album titles and  
picture captions, organize and move images, and do much more.  
You will also have access to picture management tools to improve  
and customize your pictures. You’ll be able to lighten, darken, crop,  
add antique effects, add comic bubbles and cartoon effects, and use  
other features to transform your pictures.  
To access the Picture Mail Website:  
1. From your computer’s Internet connection, go to  
2. Enter your PCS Phone Number and Picture Mail password to  
register. (See “Creating Your Picture Mail Password” on page 105.)  
Section 2J: Using Your Phone’s Built-in Camera  
112  
       
Managing Online Picture Mail From Your  
PCS Vision Phone  
You can use your phone to manage, edit, or share pictures you have  
uploaded to the Picture Mail Website. (See “Online albums” on page  
111 for information about uploading.)  
To view your online Picture Mail from your PCS Vision Picture Phone:  
1. From the standby mode, press Menu, scroll to Pictures, and  
press Select.  
2. Scroll to Online albums and press Select.  
3. Scroll to View online albums and press Select. (Depending on  
your settings you may be prompted to accept a PCS Vision  
connection.)  
4. Scroll to the Uploads album (or another album) and press Options.  
5. Select Open album and press Select. (The album opens and displays  
the pictures stored there.)  
Section 2J: Using Your Phone’s Built-in Camera  
113  
   
To manage your online Picture Mail from your PCS Vision Picture Phone:  
2. Select Options (left selection key) to display the following options:  
Open album. Open the album to view pictures stored there.  
Send Album. Send the album to a recipient.  
Copy contents. Copy the contents of the album. (The original  
pictures remain in their album.)  
To copy the pictures to an existing album, select the album and  
press Select.  
- or -  
To copy the pictures to a new album, scroll to New Album and  
press Select.  
Move contents. Move the contents of the album. (The  
pictures are removed from the original album and added to  
the chosen album.)  
To move the pictures to an existing album, select the album  
and press Select.  
- or -  
To move the pictures to a new album, scroll to New Album  
and press Select.  
Create new album. Create a new album.  
Delete contents. Delete all pictures from an album.  
Details. Display details about an album. (The album name,  
the date created, and the time created are displayed.)  
Section 2J: Using Your Phone’s Built-in Camera  
114  
Sharing Online Picture Mail  
1. From an open album on the Picture Mail Website, select the  
picture you wish to share and select Options. (See “Managing  
(The picture can be displayed full screen size by scrolling to  
Expand and pressing Select.  
2. Scroll to Send and press Select.  
3. To send the picture to a wireless phone number, scroll to  
Add number, press Select, enter a number (or search for one in  
your Contacts list), scroll to Send, and press Select.  
- or -  
To send the picture to an email address, scroll to Add email,  
press Select, enter an email address (or search for one in your  
Contacts list), scroll to Send, and press Select.  
- or -  
To send the picture to an email address stored in your online  
account, scroll to Add online addr, press Select, choose an email  
address from your list, and press Select.  
To share an album from online mode:  
1. From the View online albums, press Select. (Your Picture Mail  
Uploads album and your other albums appear.)  
2. Scroll to the Uploads album (or another album) and press Options.  
3. Scroll to Send Album, press Select, and follow the appropriate  
4. To send the album to a PCS Vision picture phone number,  
scroll to Add number, press Select, enter a number (or search  
for one in your Contacts list), scroll to Send, and press Select.  
- or -  
To send the album to an email address, scroll to Add email,  
press Select, enter an email address (or search for one in your  
Contacts list), scroll to Send, and press Select.  
- or -  
To send the album to an email address stored in your online  
account, scroll to Add online addr, press Select, choose an email  
address from your list, and press Select.  
Section 2J: Using Your Phone’s Built-in Camera  
115  
 
Accessing Online Picture Mail Options From Your  
PCS Vision Phone  
To access your online Albums options from your PCS Phone:  
1. From the standby mode, press Menu, scroll to Pictures, and  
press Select.  
2. Scroll to Online albums and press Select.  
3. Scroll to View online albums and press Select. (Depending on  
your settings you may be prompted to accept a PCS Vision  
connection. Your Picture Mail Uploads album and your other  
albums appear.)  
4. Scroll to the Uploads album (or another album), press Options,  
scroll to Open album, and press Select.  
Once in the album, you can view all the pictures you have taken,  
send pictures to contacts, delete images, and access additional  
picture options.  
Select Options (left selection key) to display the following options:  
Expand. Enlarge a picture to full screen size.  
Send. Create and send Picture Mail.  
Copy. Copy the picture to another album.  
Move. Move the picture to another album.  
Rotate picture. Rotate the picture to the left or right by  
90 degrees.  
Delete. Delete a single picture.  
Change caption. Change a picture’s name.  
Add to contact. Attach the picture to a contact in your  
Contacts list.  
Set as wallpaper. Set the picture as a background image for  
your standby screen.  
Details. Display the picture caption, its size (memory used),  
the date it was captured, the date and time it was uploaded,  
and its resolution (pixel size).  
.
The Uploads album cannot be erased or renamed.  
Note:  
Section 2J: Using Your Phone’s Built-in Camera  
116  
 
Section 2K  
Additional Features  
In This Section  
Your PCS Vision Picture Phone PM-6225 by Nokia has lots of additional  
features. Let’s explore them here.  
Section 2K: Additional Features  
117  
 
Listening to the FM Radio  
Your phone contains an FM radio. You can select up to 20 of your  
favorite stations and set them for convenient listening any time you like.  
The quality and signal strength of a radio broadcast depends on the  
coverage of the radio station in your particular area.  
Note:  
To listen to the radio, you must have a headset or a Music Stand  
connected to the Pop-Port connector on your phone. (The wires of the  
headset function as the antenna, so let them hang freely.)  
Turning on the Radio  
To turn on the radio:  
1. Connect a headset or a Music Stand to the Pop-Port connector.  
2. From the standby mode, press Menu, scroll to Radio, and press  
Select. (The radio turns on automatically.)  
To adjust the radio volume:  
Press the top of the volume control (located on the left side of  
the phone) to increase the volume.  
- or -  
Press the bottom of the control to decrease the volume.  
Section 2K: Additional Features  
118  
       
Using Voice Commands to Operate Your Radio  
You can create voice commands that operate your radio when you  
speak them.  
To create voice commands:  
1. From the standby mode, press Menu, scroll to Settings, and  
press Select.  
2. Scroll to Voice commands, press Select, scroll to Radio, and  
press Select.  
3. Scroll to Radio on, Radio off, Next channel, or Previous channel,  
depending on the command that you want to create, then  
press Options.  
4. Scroll to Add command and press Select.  
5. Press Start and speak your command after the tone  
.
You could say “Next station” or other words when creating a voice  
command for Next channel. The phone does not understand the words,  
it only remembers the sounds. The same is also true for other commands.  
Tip:  
6. To review, change, or delete the voice command, press  
Options, scroll to select the action, and press Select.  
To use voice commands:  
To use voice commands to operate the radio, the radio must be on and  
the phone in the standby mode.  
Note:  
1. From the standby mode, press and hold the  
seconds. (The key is below Contacts).  
key for two  
2. Speak your command after the beep. (If a voice match is found,  
the phone executes the command.)  
Section 2K: Additional Features  
119  
   
Selecting Radio Stations  
You can use the automatic tuning feature to scan for available local  
stations, you can program specific stations into your radio, or you  
can change stations using voice commands.  
To use Automatic tuning:  
1. From the standby mode, press Menu, scroll to Radio, and  
press Select.  
2. Press Options, scroll to Automatic tuning, and press Select.  
3. Press  
or  
. (The radio will scan up or down in frequency  
to find stations and stop when the next station is found.)  
To program radio station presets:  
You can program 20 stations into your radio, then scroll through  
them to select one for listening.  
1. From the standby mode, press Menu, scroll to Radio, and  
press Select.  
2. Press Options, scroll to Manual tuning, and press Select.  
3. Press  
press OK.  
or  
to select the frequency of a radio station and  
4. Press Options, scroll to Save channel, press Select, enter a name  
for the channel, and press OK.  
5. Scroll to a channel position and press Select to assign the  
channel to this location.  
6. To program more channels, repeat Steps 1–5 until finished  
with your programming.  
Once programmed, a channel can be deleted or renamed.  
Section 2K: Additional Features  
120  
   
To select a preset station:  
1. From the standby mode, press Menu, scroll to Radio, and  
press Select.  
2. Press  
or  
to select a preset radio station.  
To manually tune the radio:  
1. From the standby mode, press Menu, scroll to Radio, press  
Select, and press Options.  
2. Scroll to Set frequency and press Select.  
3. Using the keypad and the four-way scroll key, enter the  
frequency for one of your favorite stations, and press OK. (The  
station will continue to play unless interrupted by a phone call.)  
Turning off the Radio  
To turn off the radio:  
Press and hold  
for two seconds.  
When you place or receive a call, the radio automatically mutes. Once  
the call is ended, the radio automatically switches back on.  
Note:  
Section 2K: Additional Features  
121  
 
Using the IR (Infrared) Beam  
Your phone has the ability to send and receive data using an invisible  
infrared (IR) beam. Data can be shared between IR-compatible  
phones and devices.  
Ensure that the IR ports of the sending and receiving devices are  
pointing at each other and that there are no obstructions between  
the devices.  
The preferable distance between the two devices in an IR  
connection is from 3 inches to 3 feet  
Do not point the IR beam at anyone’s eye or allow it to interfere with  
other IR devices. This is a Class 1 laser product.  
Note:  
When sending data using IR, ensure the other device is set to receive  
IR data. Refer to the user guide for the receiving device for information  
on enabling IR data transfer.  
This capability can be used for the following:  
Send and receive a calendar note that was created in your  
phone’s Organizer.  
Send and receive a contact (business card).  
Send and receive application data with another IR-compatible  
device using IR connectivity  
Section 2K: Additional Features  
122  
     
Activating the IR Capability  
The  
icon is displayed at the upper left corner of the display  
when the IR capability is activated.  
IR capability automatically deactivates after two minutes.  
Note:  
To activate IR using the phone menus:  
1. From the standby mode, press Menu, scroll to Settings, and  
press Select.  
2. Scroll to Infrared and press Select.  
To activate IR using a voice command:  
1. From the standby mode, press Menu, scroll to Settings, and  
press Select.  
2. Scroll to Voice commands, press Select, scroll to Infrared, and  
press Select.  
3. Press Options, scroll to Add command, and press Select.  
4. Press Start and speak your voice command.  
5. Press Options and scroll to Playback, Change, or Delete the  
command, then press Select.  
Section 2K: Additional Features  
123  
   
Sending and Receiving Calendar Notes  
Two compatible phones can share calendar notes with each other  
using IR.  
To send a calendar note using IR:  
1. Point the activated IR port of your phone toward the activated  
IR port of the receiving phone, and have them at the  
recommended distance from each other.  
2. From the Calendar menu of the Organizer, scroll to a day with  
the desired note and press Options.  
3. Scroll to View day and press Select.  
4. Scroll to select the message and press Options.  
5. Scroll to Send note, press Select, scroll to Via infrared, and press  
Select. (A message displays that the message is being sent.)  
To receive a calendar note using IR:  
1. Point the activated IR port of your phone toward the activated  
IR port of the sending phone, and have them at the  
recommended distance from each other.  
2. Wait for the calendar note to be received on your phone.  
(A confirming message is displayed when the note is  
successfully received.)  
3. Press Show and Save to save the calendar note.  
Section 2K: Additional Features  
124  
 
Sending and Receiving a Business Card  
Two compatible phones can share information from the Contacts  
list with each other using IR. This makes it easy to send another  
person your phone numbers by selecting your personal contact in  
the Contacts list. This is particularly convenient for business  
contacts, and to share your friends numbers with other people.  
To send a contact (business card) using IR:  
1. Point the activated IR port of your phone toward the activated  
IR port of the receiving phone, and have them at the  
recommended distance from each other.  
2. From the standby mode, press Contacts, scroll to Search, and  
press Select.  
3. Scroll to select a contact, press Details, and press Options.  
4. Scroll to Send bus. card, press Select, scroll to Via infrared, and  
press Select.  
5. Scroll to select Primary number or All details and press Select.  
To receive a contact (business card) using IR:  
1. Point the activated IR port of your phone toward the  
activated IR port of the sending phone, and have them  
at the recommended distance from each other.  
2. Wait for the business card to be received on your phone.  
(A confirming message is displayed when the business  
card is successfully received.)  
3. Press Show and Save to save the business card.  
Section 2K: Additional Features  
125  
   
Using a Calling Card  
If you use a calling card for long distance calls, you can program the  
calling card into your phone. A Calling Card is a card with an  
account number supplied by your long distance service provider  
that allows you to place calls and have the cost of the call  
automatically charged to your account.  
To set up a calling card:  
1. From the standby mode, press Menu, scroll to Settings, and  
press Select.  
2. Scroll to Call settings, press Select, scroll to Calling card, and  
press Select.  
3. Enter your lock code and press OK.  
4. Scroll to Card A (or another card), press Options, scroll to Edit,  
and press OK.  
5. Scroll to Card name and press Select.  
6. In the Card name: box, type in the name of the calling card,  
then press OK.  
Section 2K: Additional Features  
126  
   
Creating Dialing Instructions  
The service provider of your Calling Card account requires a specific  
sequence of numbers to be dialed before your call is completed.  
Dialing sequence sets up the needed format.  
To create dialing instructions:  
1. From the standby mode, press Menu, scroll to Settings, and  
press Select.  
- or -  
From Step 6 above, skip to Step 5 below.  
2. Scroll to Call settings, press Select, scroll to Calling card, and  
press Select.  
3. Enter your security code and press OK.  
4. Scroll to Card A (or another card), press Options, scroll to Edit,  
and press OK.  
5. Scroll to Dialing sequence and press Select.  
6. Scroll to Access no. + phone no. + card no. (or other dialing  
sequence required by that account provider) and press Select.  
7. Enter the first required number and press OK.  
8. Enter the next required number and press OK to save. (The  
phone number, phone no., is selected when you actually make a  
call using this Calling Card account.)  
Placing a Calling Card Call  
After setting up the Calling Card and its dialing instructions, you are  
ready to place a phone call using your Calling Card.  
To use your calling card account:  
1. From the Calling card menu, scroll to select a calling card and  
press Options.  
2. Scroll to Select and press OK. (A Card ready for use message is  
displayed.)  
3. Enter the phone number you want to call.  
4. Press and hold  
for a few seconds until Card call... is  
displayed.  
5. When you hear a tone or system message, press OK.  
Section 2K: Additional Features  
127  
Section 3  
PCS Service Features  
 
Section 3A  
PCS Service Features: The Basics  
In This Section  
Now that you’ve mastered your phone’s fundamentals, it’s time to explore  
the calling features that enhance your PCS Service. This section outlines  
your basic PCS Service features.  
Section 3A: PCS Service Features - The Basics  
129  
 
Using Voicemail  
Setting Up Your Voicemail  
All unanswered calls to your PCS Vision Phone are automatically  
transferred to your voicemail, even if your phone is in use or turned  
off. Therefore, you will want to set up your PCS Voicemail and  
personal greeting as soon as your PCS Vision Phone is activated.  
To set up your voicemail:  
1. Press and hold  
for two seconds.  
2. Follow the system prompts to:  
Create your pass code.  
Record your greeting.  
Record your name announcement.  
Choose whether to activate One-Touch Message Access (a  
feature that lets you access messages simply by pressing one  
key, bypassing the need for you to enter your pass code).  
The voicemail setup process may vary in certain Affiliate areas.  
Note:  
Voicemail Notification  
There are several ways your PCS Vision Phone alerts you of a  
new message:  
By displaying a message on the screen.  
By sounding the assigned ringer type.  
By displaying  
at the top of your screen.  
Section 3A: PCS Service Features - The Basics  
130  
             
New Voicemail Message Alerts  
When you receive a new voice message, your phone alerts you and  
prompts you to call your voicemail.  
To call your voicemail:  
1. Press and hold  
.
2. As soon as you hear your own greeting message, press and hold  
. (You will be prompted to enter your pass code. Follow  
the prompts.)  
You can also press Listen when you receive notification of new  
voicemail messages.  
Tip:  
When the phone is turned on, and an incoming call was missed,  
“New voice message” is displayed on your screen.  
To display your missed calls:  
Press Listen.  
When you are roaming off the Sprint Nationwide PCS Network, you  
may not receive notification of new voicemail messages. It is  
recommended that you periodically check your voicemail by dialing  
1 + area code + your PCS Phone Number. When your voicemail  
Important:  
answers, press  
and enter your pass code. You will be charged  
roaming rates when accessing voicemail while roaming off the  
Sprint Nationwide PCS Network.  
Your phone accepts messages even when it is turned off. However, you  
are only notified of new messages when your phone is turned on and you  
are in a PCS Service Area.  
Note:  
Section 3A: PCS Service Features - The Basics  
131  
 
Retrieving Your Voicemail Messages  
You can review your messages directly from your PCS Vision Phone or  
from any other touch-tone phone. To dial from your PCS Vision  
Phone, you can either speed dial your voicemail or use the menu keys.  
Using One-Touch Message Access  
Press and hold  
for two seconds. (Follow the system prompts.)  
You are charged for airtime minutes when you are accessing your  
voicemail from your PCS Vision Phone.  
Note:  
Using a Phone Other Than Your PCS Phone to Access Messages  
1. Dial your PCS Phone Number.  
2. When your voicemail answers, press  
.
3. Enter your pass code.  
When you call into voicemail you first hear the header information (date,  
time, and sender information) for the message. To skip directly to the  
message, press 4 during the header.  
Tip:  
Section 3A: PCS Service Features - The Basics  
132  
   
Voicemail Button Guide  
Here’s a quick guide to your keypad functions while listening to  
voicemail messages. For further details and menu options, see  
Date/Time Send Reply Advance  
Replay  
Erase  
Rewind  
Call Back  
Help  
Forward  
Save  
Cancel  
Skip  
Voicemail Options  
Your PCS Vision Phone offers several options for organizing and  
accessing your voicemail.  
Using Expert Mode  
Using the Expert Mode setting for your personal voicemail box  
helps you navigate through the voicemail system more quickly by  
shortening the voice prompts you hear at each level.  
To turn Expert Mode on or off:  
1. Press and hold  
to access your voicemail. (If your voicemail  
box contains any new or saved messages, press  
the main voicemail menu.)  
to access  
2. Press  
to change your Personal Options, following the  
system prompts.  
3. Press  
for Expert Mode.  
4. Press  
to turn Expert Mode on or off.  
Section 3A: PCS Service Features - The Basics  
133  
     
Setting Up Group Distribution Lists  
Create up to 20 separate group lists, each with up to 20 customers.  
1. Press and hold  
to access your voicemail. (If your voicemail  
box contains any new or saved messages, press  
the main voicemail menu.)  
to access  
2. Press  
to change your Personal Options, following the  
system prompts.  
3. Press  
for Administrative Options.  
for Group Distribution Lists.  
4. Press  
5. Follow the voice prompts to create, edit, rename, or delete  
group lists.  
PCS Callback  
Return a call after listening to a message without disconnecting  
from voicemail.  
Press  
after listening to a message. (Once the call is  
complete, you’re returned to the voicemail main menu.)  
Voicemail-to-Voicemail Message  
Record and send a voice message to other PCS Voicemail users.  
1. From the main voicemail menu, press  
to send a message.  
2. Follow the voice prompts to enter the phone number.  
3. Follow the voice prompts to record and send your voice message.  
Voicemail-to-Voicemail Message Reply  
Reply to a voice message received from any other PCS Voicemail user.  
1. After listening to a voice message, press  
.
2. Follow the voice prompts to record and send your reply.  
Section 3A: PCS Service Features - The Basics  
134  
Voicemail-to-Voicemail Message Forwarding  
Forward a voice message, except those marked “Private,to other  
PCS Voicemail users.  
1. After listening to a message, press  
.
2. Follow the voice prompts to enter the phone number.  
3. Follow the voice prompts to record your introduction and  
forward the voice message.  
Voicemail-to-Voicemail Receipt Request  
Receive confirmation that your voice message has been listened to  
when you send, forward, or reply to other PCS users.  
1. After you have recorded a message, press  
to indicate you  
are satisfied with the message you recorded.  
2. Press  
to mark receipt requested.  
3. Press  
to send your voicemail message.  
Continue Recording  
When leaving a voice message, you can choose to continue  
recording even after you’ve stopped.  
Press  
to continue recording. (Pressing  
indicates you  
are satisfied with the message you recorded.)  
Extended Absence Greeting  
When your phone is turned off or you are off the Sprint Nationwide  
PCS Network for an extended period, this greeting can be played  
instead of your normal personal greeting.  
1. From the main voicemail menu, press  
for Personal  
Options.  
2. Press  
for Greetings.  
to record an Extended Absence Greeting.  
3. Press  
Section 3A: PCS Service Features - The Basics  
135  
Voicemail Menu Key  
Following the prompts on the voicemail system, you can use your  
keypad to navigate through the following voicemail menu.  
Listen  
Date/Time  
Send Reply  
Advance  
Replay  
Rewind  
Forward Message  
Erase  
Callback  
Save  
Options  
Send a Message  
Personal Options  
Notification Options  
Phone Notification  
Numeric Paging to a PCS Phone  
Return to Previous Menu  
Administrative Options  
Skip Passcode  
Autoplay  
Message Date & Time On/Off  
Change Passcode  
Group Distribution List  
Return to Previous Menu  
Greetings  
Personal Greetings  
Recorded Name Announcement  
Extended Absence Greeting  
Return to Previous Menu  
Expert Mode On/Off  
Place a Call  
Exit  
Section 3A: PCS Service Features - The Basics  
136  
   
Using Caller ID  
Caller ID allows people to identify a caller before answering the  
phone by displaying the number of the incoming call. If you do not  
want your number displayed when you make a call, just follow these  
easy steps.  
To block your phone number from being displayed for a specific  
outgoing call:  
1. Press  
2. Enter the number you want to call.  
3. Press  
.
.
To permanently block your number, call PCS Customer Solutions.  
Responding to Call Waiting  
When you’re on a call, Call Waiting alerts you of incoming calls by  
sounding two beeps. Your phone’s screen informs you that another  
call is coming in and displays the caller’s phone number (if it is  
available and you are in digital mode).  
To respond to an incoming call while you’re on a call:  
1. Press  
. (This puts the first caller on hold and answers the  
second call.)  
2. To switch back to the first caller, press  
again.  
– or –  
Press to end your first call, then press to answer the  
incoming call.  
For those calls where you don’t want to be interrupted, you can  
Tip:  
temporarily disable Call Waiting by pressing  
placing your call. Call Waiting is automatically reactivated once you  
end the call.  
before  
Section 3A: PCS Service Features - The Basics  
137  
       
Making a Three-Way Call  
With Three-Way Calling, you can talk to two people at the same  
time. When using this feature, the normal airtime rates will be  
charged for each of the two calls.  
To make a Three-Way Call:  
1. Enter a phone number you wish to call and press  
. (The  
number is dialed.)  
2. Once you have established the connection, press Options,  
scroll to Three-way call, and press Select.  
3. Dial the second number you wish to call and press  
.
4. When you’re connected to the second party, press  
again to  
begin your three-way call.  
If one of the people you called hangs up during your call, you and  
the remaining caller stay connected. If you initiated the call and are  
the first to hang up, all three callers are disconnected.  
You can also begin a Three-Way Call by displaying a phone number stored  
in your Phone Book or Call Logs. To call the third party, press  
Tip:  
.
Call Waiting and Three-Way Calling are not available while roaming off  
the Sprint Nationwide PCS Network.  
Note:  
Section 3A: PCS Service Features - The Basics  
138  
   
Using Call Forwarding  
Call Forwarding lets you forward all your incoming calls to another  
phone number – even when your phone is turned off. You can  
continue to make calls from your phone when Call Forwarding  
is activated.  
To activate Call Forwarding:  
1. Press  
and enter the area code and phone number  
to which your future calls should be forwarded.  
2. Press  
. (You will see a message and hear a tone to confirm  
the activation of Call Forwarding.)  
To deactivate Call Forwarding:  
1. Press  
.
2. Press  
. (You will see a message and hear a tone to confirm  
the deactivation.)  
You are charged a higher rate for calls you have forwarded.  
Note:  
Section 3A: PCS Service Features - The Basics  
139  
   
Section 3B  
PCS VisionSM  
In This Section  
SM  
PCS Vision brings you clarity you can see and hear with advanced  
multimedia services. These features, including PCS Messaging, games,  
downloadable ringers and screen savers, Web access, and PCS Business  
ConnectionSM, are easy to learn and use. The rich, colorful graphic  
experience is visually comparable to your home or office computer.  
Clearly, it’s a whole new way to look at wireless.  
This section introduces these advanced services and walks you through  
the necessary steps to start taking advantage of PCS Vision.  
Section 3B: PCS Vision  
140  
 
Getting Started With PCS Vision  
With your PCS Vision Phone and PCS Service, you are ready to start  
enjoying the advantages of PCS Vision. This section will help you  
learn the basics of using your PCS Vision services, including  
managing your User Name, launching a Vision connection, and  
navigating the Web with your PCS Vision Phone.  
Your User Name  
When you buy a PCS Vision Phone and sign up for service, you're  
automatically assigned a User Name. A User Name is typically based  
on your name and a number, followed by “@sprintpcs.com.” For  
example, the third John Smith to sign up for PCS Vision services  
might have [email protected] as his User Name. If you want a  
particular User Name, you can visit www.sprintpcs.com and get the  
name you want – as long as nobody else has it.  
When you use PCS Vision services, your User Name is submitted to  
identify you to the Sprint Nationwide PCS Network. The User Name  
is also useful as an address for PCS Mail, as a way to personalize Web  
services, and as an online virtual identity.  
If you already have a PCS Mail User Name, that will automatically  
become your PCS Vision User Name.  
Note:  
Your User Name will be automatically programmed into your  
PCS Vision Phone. You don't have to enter it.  
Finding Your User Name  
If you aren't sure what your PCS Vision User Name is, you can easily  
find it online or on your PCS Vision Phone.  
To find your User Name:  
At www.sprintpcs.com. Sign on to your account using your  
PCS Phone Number and Password. Your User Name appears in  
the top banner, next to your phone number.  
On your PCS Vision Phone. You can find your User Name (User ID)  
in the Settings main menu under User details in the Phone details  
submenu.  
.
To access the phone’s main menu, press Menu from the standby mode.  
Menu items may be selected by highlighting them with the navigation  
key and pressing Select.  
Note:  
Section 3B: PCS Vision  
141  
         
Launching a PCS Vision Connection  
To launch a PCS Vision connection:  
Press Menu, scroll to Web, and press Connect.  
You can also press to launch the Web.  
Shortcut:  
Your PCS Vision connection will launch and the PCS Vision Home  
page will display.)  
The PCS Vision Home Page  
Selects the  
highlighted item  
Opens a  
pop-up menu  
If Net Guard is enabled and displayed (see “Net Guard” on page 143),  
select OK (right selection key) to continue and launch the Web.  
Note:  
If you had a previous PCS Vision connection, the last page you  
visited (for example, SMS Text Messaging or ESPN Top News) will  
display when you launch your browser. Though the browser is  
open, you are not currently in an active data session—that is, no data  
is being sent or received. As soon as you navigate to another page,  
the active session will launch.  
Ending a PCS Vision Connection  
To end your Web session:  
1. From the browser, press Menu. (The Navigate pop-up menu is  
displayed.)  
2. Scroll to Exit web and press Select. (The browser will close and  
the connection will become dormant.)  
You can also press and hold  
(end key) to end your session.  
Shortcut:  
Section 3B: PCS Vision  
142  
       
Clearing the Cache  
A cache is a memory location that is used to store data temporarily.  
If you have tried to access or have accessed confidential information  
requiring passwords, empty the cache after each use. The  
information or services you accessed is stored in the cache.  
To empty the cache:  
1. From the browser, press Menu. (The Navigate pop-up menu is  
displayed.)  
2. Scroll to Advanced... and press Select.  
3. Scroll to Clear, press Select, scroll to Cache, and press Pick.  
(This places an “X” in the check box.)  
4. Scroll to highlight Clear, press Select, and confirm you decision  
by pressing Select again.  
Net Guard  
When you first connect to the Web, the Net Guard will appear to  
confirm that you want to connect. This feature helps you avoid  
accidental connections. You can disable the Net Guard in the future  
by selecting Auto-connect when the Net Guard is displayed.  
To change your Net Guard settings:  
1. Press Menu, scroll to Settings, and press Select.  
2. Scroll to PCS Vision, press Select, scroll to Net Guard, and  
press Select.  
3. Select On to activate the Net Guard.  
- or -  
Select Off to deactivate the Net Guard.  
4. Press OK.  
When enabled, the Net Guard appears only once per session. The Net Guard  
does not appear if the phone is merely reconnecting due to a time-out.  
Note:  
Section 3B: PCS Vision  
143  
       
PCS Vision Connection Status and Indicators  
Your phone's display lets you know the current status of your  
PCS Vision connection through indicators which appear at the top  
of the screen. The following symbols are used:  
The PCS Vision connection is active and your phone is  
sending data.  
The PCS Vision connection is active and your phone is  
receiving data.  
The PCS Vision connection is dormant (no data is being  
sent or received). Though not currently active, when  
dormant, the phone can restart an active connection  
quickly; voice calls can be made and received.  
When a PCS Vision connection is active, incoming voice calls go  
directly to voicemail; outgoing voice calls can be made, but the PCS  
Vision connection will terminate.  
If no indicator appears, your phone does not have a current  
PCS Vision connection. To launch a connection, see “Launching a  
Section 3B: PCS Vision  
144  
 
Navigating the Web  
Navigating through menus and Websites during a PCS Vision  
session is easy once you've learned a few basics. Here are some tips  
for getting around:  
Softkeys  
During a PCS Vision session, the bottom line of your phone's display  
contains one or more softkeys. These keys are shortcut controls for  
navigating around the Web, and they correspond to the selection  
keys directly below the phone’s display screen.  
Depending on which Websites you visit, the labels on the softkeys may  
change to indicate their function.  
Tip:  
To use softkeys:  
Press the desired selection key. (If an additional pop-up menu  
appears when you press the selection key, select the menu  
items using your keypad [if they’re numbered] or by  
highlighting the option and pressing Select.)  
PCS Vision Home Page  
Selects the  
highlighted item  
Cancels the  
pop-up menu  
Left  
Right  
Scrolling  
As with other parts of your phone's menu, you'll have to scroll up  
and down to see everything on some Websites.  
To scroll line by line or link by link through Websites:  
To scroll up, press  
- or -  
or  
.
To scroll down, press  
or  
.
Section 3B: PCS Vision  
145  
   
Selecting  
Once you've learned how to use softkeys and scroll, you can start  
navigating the Web.  
To select on-screen items:  
Use the navigation key to highlight the desired item, then press  
the desired selection key (or press Select).  
You'll find that the left softkey is used primarily for selecting items. This  
softkey is often labeled Select.  
Tip:  
If the items on a page are numbered, you can use your keypad (number  
keys) to select an item. (The tenth item in a numbered list may be  
selected by pressing  
on your phone’s keypad, even though the  
number 0 doesn’t appear on the screen.)  
Links, which appear as underlined text, allow you to jump to different  
Web pages, select special functions, or even place phone calls.  
To select links:  
Highlight the link and select the appropriate softkey.  
Going Back  
To go back one page:  
From the browser, press Menu, scroll to Back on the pop-up  
menu, and press Select.  
- or -  
Press  
.
Tap  
to delete text (like a Backspace key), or press and hold  
Clear  
Clear  
Note:  
to delete the entire text you entered.  
Going Home  
To return to the PCS Vision Home page from any other Web page:  
Press Menu, scroll to Home, and press Select.  
- or -  
Press  
to back up to the previous page as many times as  
necessary to reach the PCS Vision home page.  
Section 3B: PCS Vision  
146  
SM  
Picture Mail  
Using Picture Mail  
Your PCS Vision Picture Phone gives you the ability to take pictures,  
view them using the phone's display, and instantly send them to  
your friends and family. It's as easy to use as a traditional point-and-  
click camera.  
In addition to sending your pictures to friends and family, you can  
also send them to a Picture Mail Website for storage or upload them  
to a personal Website. Cameras can take and store pictures and the  
image quality is similar to what you see on your computer screen.  
Taking and Viewing Pictures  
To take and view pictures with a camera phone:  
Section 3B: PCS Vision  
147  
     
Sharing Picture Mail From Your PCS Phone  
Creating Your Picture Mail Password  
The first time you use any of the Picture Mail management  
options involving the Picture Mail Website, you will need to establish  
a password using your PCS Vision Picture Phone. This password will  
also allow you to sign on to the Picture Mail Website at  
picturemail.sprintpcs.com to access and manage your uploaded pictures.  
To create your Picture Mail password:  
1. Press Menu, scroll to Pictures, and press Select.  
2. Scroll to My pictures and press Select.  
3. Scroll to Stored in camera and press Select.  
4. Select a picture, press Options, scroll to Upload, and press Select.  
(You will be prompted to create a Picture Mail password.)  
If your PCS Service Plan does not include Picture Mail, you will first be  
prompted to subscribe to the service for an additional monthly charge.  
Note:  
5. Enter a four- to eight-digit password and press OK. (You will be  
prompted to confirm your password.)  
Write down your Picture Mail password in a secure place.  
Tip:  
6. Please wait while the system creates your account.  
Once you have received confirmation that your account has been  
successfully registered, you may upload and share pictures and  
access the Picture Mail Website.  
Section 3B: PCS Vision  
148  
   
Sending Picture Mail From Your PCS Vision Picture Phone  
To send Picture Mail from your phone:  
1. Press Menu, scroll to Messaging, and press Select.  
2. Scroll to Create Picture Mail and press Select. (Pictures stored  
in your phone’s camera are displayed.)  
3. Scroll to select a picture, press Options, scroll to Insert, and  
press Select.  
4. Scroll to Add number and press Select.  
5. To select a recipient from your Contacts list, press Search,  
highlight a contact, and press Select.  
- or -  
Enter the recipient’s PCS Vision picture phone number and  
press OK.  
6. Scroll to highlight the recipient and press Options.  
7. Scroll to Send and press Select. (Your message will be sent.)  
Accessing the Picture Mail Website From Your Computer  
From the Website, you can share pictures, edit album titles and  
picture captions, organize and move images, and much more.  
Picture management tools are also available to improve or customize  
your pictures. You'll be able to lighten, darken, crop, antique, add  
comic bubbles and cartoon effects, and use other features to  
transform your pictures.  
To connect to the Picture Mail Website from your computer:  
From your computer, sign on to picturemail.sprintpcs.com.  
(You will first need to register through your PCS Vision Picture  
Phone to view the Picture Mail Website; see “Creating Your  
A monthly charge will apply for your use of Picture Mail services.  
See your PCS Service Plan for details.  
Note:  
Section 3B: PCS Vision  
149  
 
PCS Messaging  
Understanding Messaging  
Now you can send and receive emails and text messages and  
participate in Web-based chatrooms right from your PCS Vision  
Phone. Messaging allows you to stay connected to friends, family,  
and co-workers 24 hours a day anywhere on the Sprint Nationwide  
PCS Network.  
Message Types  
There are many types of text messaging available on your phone.  
These appear on your screen and include numeric messages (pages),  
Messages, Updates, and Mail.  
(PCS Voicemail provides voicemail-to-mailbox messaging. For  
information on using your phone’s voicemail feature, see “Using  
Message Folders  
Incoming Updates and numeric pages are stored in folders in your  
phone’s Messaging menu. You may add your own folders or use the  
phone’s default folders.  
To add a new folder:  
1. From the standby mode, press Menu, scroll to Messaging, and  
press Select.  
2. Scroll to Messages and press Select.  
3. Scroll to My folders and press Select. (If there are no folders,  
the message “(empty)” displays.)  
4. Press Options, scroll to Add folder, press Select, type a name for  
the folder, and press OK.  
Section 3B: PCS Vision  
150  
         
To edit a folder name:  
1. From the standby mode, press Menu, scroll to Messaging, and  
press Select.  
2. Scroll to Messages and press Select.  
3. Scroll to My folders, press Select, scroll to the folder, and  
press Options.  
4. Scroll to Rename folder and press Select.  
5. Modify the folder name and press OK.  
Erasing Messages  
To erase messages:  
1. From the standby mode, press Menu, scroll to Messaging, and  
press Select.  
2. Scroll to Messages and press Select.  
3. Scroll to Delete messages and press Select  
4. Scroll to select one of the following categories:  
All  
All read  
All unread  
Inbox  
Sent items  
Archive  
(folder name you created)  
5. Press Select to delete the category and press OK to confirm  
your decision.  
Section 3B: PCS Vision  
151  
 
Signing Up for Updates  
With Updates, you can have news and information sent directly to  
your PCS Phone at the times you choose.  
To select the information you want to send to your PCS Vision Phone:  
1. Log on to the Internet from your computer.  
2. Go to the site from which you want to receive information.  
(A few of the sites you can visit are America Online®, Yahoo!®,  
MSN® and eBay®. The location where you request updates  
within each site will vary.)  
3. Where indicated on the site, input your 10-digit PCS Phone  
Number followed by “@messaging.sprintpcs.com.(For  
example: [email protected].)  
Upon completing the registration process, you should begin  
receiving updates on your PCS Phone as requested.  
Section 3B: PCS Vision  
152  
 
Using SMS Text Messaging  
With SMS Text Messaging, you can use a person’s wireless phone  
number to send instant text messages from your PCS Vision Phone  
to their messaging-ready phone—and they can send messages to  
you. When you receive a new message, you’ll automatically be  
notified with a one-way text message.  
In addition, SMS Text Messaging includes a variety of preset  
messages, such as “I’m running late, I’m on my way,” that make  
composing messages fast and easy. You can also customize your own  
preset messages (up to 100 characters) from your PCS Vision Phone  
Creating a Short List  
You can add frequently contacted recipients to your Short List. Then  
when you compose SMS text messages, you can select them from a  
convenient list.  
To add someone to your short list:  
1. From the Vision Home page, scroll to Messaging and press Select.  
Messaging Page  
2. Scroll to Short Mail and press Select.  
3. Scroll to Settings, press Select, scroll to Edit Short List, and  
press Select.  
4. To add a new name, scroll to Add new name, press Select,  
type in an alias (a nickname for the sender), their first name,  
last name, and phone number.  
Press the  
key to select the  
character input mode to enter  
key again to change the  
Note:  
the recipient’s phone number. Press the  
character input mode.  
5. Scroll to Save, press Select, scroll to Done, and press Select.  
Section 3B: PCS Vision  
153  
     
6. To delete a name, select it from your SMS Text Messaging list,  
scroll down to Erase, and press Select. Press Select again to  
confirm your decision.  
Composing SMS Text Messages  
To compose an SMS text message:  
1. Launch the browser by pressing  
.
2. From the Vision Home page, scroll to Messaging and press  
Select.  
3. Scroll to Send a Message and press Select. (The Short Mail  
menu is displayed.)  
4. Scroll to Compose and press Select.  
5. Scroll to the To button, press Select to view and select a  
recipient’s wireless phone number from your short list, and  
press Done.  
- or -  
Scroll to the text box under the To button, type the wireless  
phone number of the person to whom you’re sending a  
message, and press Done.  
6. In the text box under Message, compose a message or use the  
preset messages or icons.  
To type a message, highlight the Message text box, use  
your keypad to type a message, and press Done when  
finished. (See “Entering Text” on page 29.)  
To use a preset message or “emoticon,highlight the down  
arrow in the Insert window, and press Select. Select  
Pre-set Msgs or Icons, press Select, then select Go. Choose  
the message or emoticon you’d like to insert and select OK.  
7. Review your message, scroll to Send, and press Select.  
Although your message was sent, there is no certainty that it was  
received by the recipient. The service area, service conditions, phone  
features compatibility, and other factors may prevent your message  
from being received.  
Note:  
Section 3B: PCS Vision  
154  
 
Accessing SMS Text Messages  
When you receive a text message, you will see “1 message received”  
on your display screen. (An alert tone my also be heard).  
You can go directly to your Web inbox by selecting E-mail from the  
Messaging menu on your phone.  
Tip:  
To read an SMS text message when it arrives:  
1. Press Show. (The Inbox will open, with the most recent  
message highlighted and at the top of the listing.)  
2. Press Select to display the message.  
To read a n SMS text message at a more convenient time:  
1. From the standby mode press Menu.  
2. Scroll to Messaging and press Select.  
3. Scroll to Text messages and press Select.  
4. Scroll to Inbox and press Select.  
5. Scroll to the message you want to read and press Select.  
After reading a message, it can be deleted by pressing Options,  
selecting Delete, and following the prompts.  
To reply to an SMS text message:  
1. Launch the browser by pressing and, from the Vision Home  
page, scroll to Messaging, and press Select.  
2. Scroll to PCS Mail Inbox and press Select.  
3. Scroll to Inbox and press Inbox.  
4. Scroll to the message and press Select to open it.  
5. With the message open in the Short Mail page, scroll to Reply  
Section 3B: PCS Vision  
155  
 
Using Preset Messages  
Preset messages make sending text messages to your friends, family,  
and co-workers easier than ever.  
To add and/or edit preset messages:  
1. Launch the browser, and from the Vision Home page, scroll to  
Messaging and press Select.  
2. Scroll to Short mail and press Select.  
3. Scroll to Settings and press Select.  
4. Scroll to Pre-set Message and press Select.  
5. From the Pre-set Messages menu, add a new message, or edit  
an existing one.  
To add a new message, scroll to (Add new), and press  
Select. Type your message, press Done, scroll to Save, and  
press Select. (Your new message is added to the list.)  
To edit an existing message, scroll to the message, press  
Select, edit the message, and press Save when finished.  
You may also add or edit preset messages in the “Manage My Account”  
area at www.sprintpcs.com.  
Note:  
Section 3B: PCS Vision  
156  
 
Using PCS Mail  
With PCS Mail, you can set up an account at no additional charge  
and perform many of the typical email functions from your  
PCS Vision Phone that you can from your personal computer.  
or from your personal computer at www.sprintpcs.com. You can also  
access other select email providers from the Web through your  
PCS Mail.  
Accessing PCS Mail Messages  
To access PCS Mail messages:  
1. From the standby mode, press Menu, scroll to Messaging, and  
press Select.  
2. Scroll to E-mail and press Select. (The browser will launch, and if  
you’re a first-time user, your phone will prompt you to set up your  
PCS Mail account by establishing a User Name and password.)  
3. To view your messages, scroll to Inbox and press Inbox.  
4. Scroll to select the message you wish to read and press Select.  
(The message opens.)  
5. Once you’ve read a message, scroll to the bottom of the  
message to use the quick actions (Reply, Reply All, Forward,  
Erase, Add to Folder, or Main).  
Composing PCS Mail Messages  
To compose and send a PCS Mail message:  
1. From the PCS Mail menu (see Steps 1–2 above), scroll to  
Compose and press Compose.  
2. Scroll to the text box under To and enter the email address of  
the person to whom you’re sending the message.  
3. Scroll to Subject and enter the subject.  
4. Scroll to Message and enter your message.  
5. Scroll to the Send button and press Select when your message  
is ready to be delivered.  
Section 3B: PCS Vision  
157  
       
Accessing Email  
With PCS Vision, you can use popular email services such as  
AOL® Mail, Yahoo!® Mail, MSN® Hotmail, and EarthLink® to keep in  
touch even while you’re on the go.  
Using Email  
To access email providers from your PCS Vision Phone:  
1. Launch the browser, scroll to Messaging, and press Select.  
(The Messaging menu is displayed.)  
2. Scroll to Email and press Select.  
3. Scroll to an email provider, such as AOL Mail, Yahoo! Mail, MSN  
Hotmail, or Earthlink, and press Select.  
4. Use your keypad to enter the required sign-in information for  
the selected provider, such as user name, email address, and/or  
password, and select Sign In. (Your mailbox for the selected  
provider will display.)  
The information required for sign in will vary depending on the email  
provider you are accessing.  
Note:  
5. Follow the onscreen instructions to read, reply to, compose,  
send, and manage your email account.  
Section 3B: PCS Vision  
158  
     
Using Instant Messaging  
PCS Vision also provides you with access to popular instant  
®
TM  
messaging (IM) clients, including AOL Instant Messenger and  
Yahoo!® Messenger.  
Accessing Instant Messaging  
To access instant messaging clients from your PCS Vision Phone:  
1. Launch the browser, scroll to Messaging, and press Select.  
(The Messaging menu is displayed.)  
2. Scroll to Instant Messaging and press Select.  
3. Select an email provider, such as AOL Instant Messenger or  
Yahoo! Messenger.  
4. Use your keypad to enter the required sign-in information for the  
selected provider, such as user name and/or password, and follow  
the prompts.  
The information required for sign in will vary depending on the instant  
messaging provider you are accessing.  
Note:  
5. Follow the onscreen instructions to read, reply to, compose,  
send, and manage your instant messaging account.  
Section 3B: PCS Vision  
159  
     
Experiencing Online Chat  
PCS Vision gives you the ability to join wireless chatrooms from your  
PCS Vision Phone, to send text messages and icons to chatroom  
participants, or to launch a one-on-one (private) chatroom.  
To access a chatroom from the browser:  
1. Launch the browser, scroll to Messaging, and press Select.  
(The Messaging menu is displayed.)  
2. Scroll to Chat and press Select. (A DISCLAIMER message for  
Wireless Chat is displayed.)  
3. After reading the entire message, if you agree to its terms, press  
Agree. (After a few seconds, a list of chatrooms will be displayed.  
- or -  
If you do not agree with its terms, press Menu and navigate to  
another page.  
4. From the chatroom list, select a chatroom (for example, Friends  
or Singles) and press Select.  
5. Use your keypad to enter a nickname, scroll to Enter, and press  
Link. (Once in the chatroom, you may scroll through the  
postings to read messages from other chatroom participants.)  
To post a message:  
1. Once in the chatroom, scroll to Add text and press TXT.  
2. Enter your message.  
3. Scroll to Send and press Link. (Your message is added to those  
in the chatroom.)  
To set up a private chatroom:  
1. Once in the chatroom, scroll to select 1->1 and press 1->1.  
2. Scroll the list to select a chatter with whom you’d like to  
launch a private chatroom and press Contact.  
To exit a chatroom:  
From a chatroom, scroll to Leave Room and press Leave.  
To avoid inadvertent data usage charges, you should sign out of  
chatrooms (Leave) when you are ready to exit.  
Note:  
Section 3B: PCS Vision  
160  
   
Downloading Premium Content  
With PCS Vision and your new PCS Vision Phone, you have access to  
a dynamic variety of Premium Service content such as downloadable  
Games, Ringers, Screen Savers, and other applications. The basic  
steps required to access and download Premium Service content are  
outlined below.  
Accessing the Download Menus  
To access the PCS Vision download menus:  
1. From the standby mode, press Menu, scroll to Downloads, and  
press Select.  
2. Select the type of file you wish to download (Screen Savers,  
Ringers, Games, or Applications) and press Select.  
3. Select Get New and press Select. (The browser will launch and  
take you to the corresponding download menu.)  
To access the PCS Vision download menus from the Web browser:  
1. From the Vision Home page, scroll to Downloads and  
press Select.  
2. Select Games, Ringers, Screen Savers, or Applications to go to  
their corresponding download menu. (For more information  
on navigating the Web, see “Navigating the Web” on page 145.)  
Selecting an Item to Download  
You can search for available items to download in a number of ways:  
Featured displays a rotating selection of featured items.  
Browse Category allows you to narrow your search to a general  
category, such as Movie/TV Themes for Ringers or College Logos  
for Screen Savers. (There may be several pages of available content  
in a list. Select Next 9 to view additional items.)  
Search allows you to use your keypad to enter search criteria to  
locate an item. You may enter an entire word or title or perform  
a partial-word search (for example, entering “goo” returns “Good  
Ol’ Boy,” The Good, the Bad, and the Ugly,and “Goofy - Club”).  
Section 3B: PCS Vision  
161  
   
Downloading an Item  
Once you’ve selected an item you wish to download, highlight it and  
press Select. You will see a summary page for the item including its  
title, the vendor, the download detail, the file size, and the cost.  
Links allow you to view the License Details page, which outlines the  
price, license type, and length of license for the download, and the  
Terms of Use page, which details the Premium Services Terms of Use  
and your responsibility for payment.  
To download a selected item:  
1. From the information page, select Buy, to purchase the item, or  
Get It, if the item is free. (If you have not previously purchased an  
item, you will be prompted to create your purchasing profile.)  
2. Confirm your purchase and the charge (if applicable) by  
reviewing the Confirmation screen. (You will be informed that  
the downloaded item has been stored in My Content Manager.)  
3. Select Download to initiate the download of the item. (You will  
see a series of browser screens, ending with the Download  
screen, which lists the item name, vendor, version, size, and type.)  
4. Select Next (right selection key) to download the item. (You  
will see another series of screens detailing the download  
initiation, progress [in kilobytes], and saving process. When  
the Completed screen appears, the item has been successfully  
downloaded to your phone.)  
5. Select Use (left selection key) to assign the downloaded item  
(or to play, in the case of a game).  
– or –  
Select Shop (right selection key) to look for other items to  
download.  
– or –  
To quit the browser and return to the standby mode, press  
Menu, scroll down to Exit web, and press Select.  
Section 3B: PCS Vision  
162  
Games  
Accessing Games  
You can play a variety of entertaining and graphically-rich games on  
your PCS Vision Phone. New games are easy to download and play.  
For complete instructions on downloading, see “Downloading Premium  
Tip:  
Downloading Games  
To download an available game to your phone:  
1. From the standby mode, press Menu, scroll to Downloads, and  
press Select.  
2. Scroll to the Games folder and press Select. (A list of games  
is displayed.)  
3. Highlight Get New and press Select. (The browser will launch  
and take you to the Games download menu.)  
4. Use your navigation key to highlight and select a game you  
wish to download. (For more information on navigating the  
5. Select Buy from the item information page. (When the  
Completed screen appears, the game has been successfully  
downloaded to your phone.)  
If you have not previously purchased an item, you will be prompted to  
create your purchasing profile.  
Note:  
6. Select an option to continue:  
Select Use to quit your Vision session and launch the game.  
Select Shop to browse for other items to purchase.  
Press END to quit the browser and return to the standby  
mode.  
Section 3B: PCS Vision  
163  
     
Playing Games  
To play a downloaded game on your PCS Phone:  
1. From the standby mode, press Menu, scroll to Downloads, and  
press Select.  
2. Scroll to the Games folder and press Select. (A list of games  
is displayed.)  
3. Scroll the list to select a game, press Options, scroll to Play, and  
press Select. (The game will open.)  
4. Select Yes and press Select if a prompt displays the days  
remaining on the game license and asks if you want to continue.  
5. To understand how to play the game, scroll to Instructions and  
press Select. (An explanation of how to play the game  
is displayed.)  
- or -  
To begin a game, scroll to New game and press Select.  
Use the navigation keys to scroll through your instructions and press  
Back to return to the previous screen. (You can press New game to  
begin a game or press High scores to review the high scores of  
previous games you played.)  
To quit a game:  
When you are finished playing, press  
, then press Yes.  
Section 3B: PCS Vision  
164  
 
Ringers  
Accessing Ringers  
You can personalize your PCS Vision Phone by downloading and  
assigning different ringers to number in your address book.  
For complete instructions on downloading, see “Downloading Premium  
Tip:  
Downloading Ringers  
To download an available ringer to your phone:  
1. From the standby mode, press Menu, scroll to Downloads, and  
press Select.  
2. Scroll to the Ringers folder and press Select. (A list of games  
is displayed.)  
3. Highlight Get New and press Select. (The browser will launch  
and take you to the Ringers download menu.)  
4. Use your navigation key to highlight and select a ringer you  
wish to download. (For more information on navigating the  
5. From the item information page, select Buy. (A confirmation  
page will notify you that the ringer has been purchased and is  
stored in My Content Manager.)  
If you have not previously purchased an item, you will be prompted to  
create your purchasing profile.  
Note:  
6. To download the ringer, select Download.  
7. From the Download screen, select Next (right selection key) to  
download the ringer. (When the Completed screen appears,  
the ringer has been successfully downloaded to your phone.)  
Section 3B: PCS Vision  
165  
       
Assigning Downloaded Ringers  
You can assign downloaded ringers from the from the Custom tone  
and Tone settings menu.  
To assign a downloaded ringer:  
– or –  
You may assign a ringer to more than one type of call.  
Note:  
Purchasing Ringers  
You can purchase ringers directly from your phone by following the  
through www.sprintpcs.com.  
Section 3B: PCS Vision  
166  
   
Screen Savers  
Accessing Screen Savers  
Download unique images to use as screen savers or make it easy to  
tell who’s calling by assigning specific images to numbers in your  
address book.  
For complete instructions on downloading, see “Downloading Premium  
Tip:  
Downloading Screen Savers  
To download an available Screen Saver to your phone:  
1. From the standby mode, press Menu, scroll to Downloads, and  
press Select.  
2. Highlight Screen Savers and press Select.  
3. Highlight Get New and press Select. (The browser will launch  
and take you to the Screen Savers download menu.)  
4. Use your navigation key to highlight and select a Screen Saver  
you wish to download. (For more information on navigating  
5. From the item information page, select Buy. (A confirmation  
page will notify you that the Screen Saver has been purchased  
and is stored in My Content Manager.)  
If you have not previously purchased an item, you will be prompted to  
create your purchasing profile.  
Note:  
6. To download the Screen Saver, select Download.  
7. From the Download screen, select Next (right selection key) to  
download the Screen Saver. (When the Completed screen  
appears, the Screen Saver has been successfully downloaded to  
your phone.)  
You may store a limited number of downloaded Screen Savers on your  
phone, depending on the file sizes. Additional downloads will be stored  
in My Content Manager.  
Note:  
Section 3B: PCS Vision  
167  
       
Assigning Downloaded Screen Savers  
Downloaded Screen Savers may be selected as wallpaper from the  
Settings menu.  
To select a downloaded Screen Saver from the Settings menu:  
You may assign a screen saver to more than one task.  
Note:  
Purchasing Screen Savers  
You can purchase Screen Savers directly from your phone by  
following the instructions in “Downloading Premium Content” on  
Section 3B: PCS Vision  
168  
   
Web  
Exploring the Web  
With Web access on your PCS Vision Phone, you can browse full-  
color graphic versions of your favorite Websites, making it easier  
than ever to stay informed while on the go. Follow sports scores,  
breaking news, weather, and shop on your PCS Vision Phone  
anywhere on the Sprint Nationwide PCS Network.  
Your browser delivers web pages that are designed for Wireless  
Application Protocol (WAP), so not all web pages are viewable with  
your phone.  
Note:  
Contact your PCS Representative for further details or visit  
www.sprintpcs.com for more information on Internet access.  
Browser services are not available while roaming off the Sprint  
Nationwide PCS Network.  
Since your phone’s display is small, the web content is different from  
what you may be used to seeing on a computer display.  
In addition to the features already covered in this section, the  
PCS Vision Home page offers access to these colorful, graphically  
rich Web categories. Many sites are available under more than one  
menu—choose the one that's most convenient for you.  
News. Get up-to-the-minute news regarding finance, business,  
sports, and entertainment at sites like CNNtoGo, Bloomberg,  
USA Today, and Forbes.  
Weather. Access The Weather Channel to get current weather  
conditions and forecasts.  
Entertainment. Get the latest buzz on your favorite stars as well as  
movie and music reviews at Websites like E! Online, Pocket  
BoxOfficeTM, and TastNtalk.  
Sports. Enjoy current news, statistics, and sports scores, as well as  
updates of events in progress at ESPN and other sports sites.  
Finance. Use Websites like Bloomberg, Fidelity, and Forbes to get  
stock quotes, make trades, and check your bank account online.  
Travel. Access flight information and make dining arrangements  
from travel Websites like Saber and Fodors.  
Section 3B: PCS Vision  
169  
   
Shopping. Browse or purchase from popular shopping Websites  
like Amazon or Edmunds.  
Tools. Use tools like Switchboard to access yellow pages, white  
pages – even reverse phone number look-up or use Google to  
search for other Websites or images.  
Business Links. Access your PCS Business Connection Personal or  
Enterprise Edition along with links to many business-related sites.  
My Account. Check minutes and PCS Vision usage, view your  
current invoice, or make a payment.  
Search. Use Google to search keywords, articles, and even images.  
Using the Browser Menu  
Navigating the Web from your phone using the PCS Vision Home  
page is easy once you get the hang of it. For details on how to  
navigate the Web, select menu items, and more, see “Navigating the  
Although the PCS Vision Home page offers a broad and convenient  
array of sites and services for you to browse, not all sites are  
represented, and certain functions, such as going directly to specific  
Websites, are not available. For these and other functions, you will  
need to use the browser menu. The browser menu offers additional  
functionality to expand your use of the Web on your PCS Vision Phone.  
Opening the Browser Menu  
The browser menu may be opened anytime you have an active  
PCS Vision session, from any page you are viewing.  
To open the browser menu:  
Press Menu. (The browser drop down menu opens.)  
The 4-way navigation key is used to select menus and menu items.  
Note:  
Section 3B: PCS Vision  
170  
   
The Navigate Pop-up Menu  
PCS Mail  
page  
Navigate  
pop-up  
menu  
Options available under the Navigate browser menu include:  
Back. Jumps back a page to the previous page you viewed.  
Home. Returns the browser to the PCS Vision Home page.  
Open Page. Allows you to navigate directly to a Website by  
entering its URL (Website address).  
Search. Launches a Google search.  
Mark Page. Displays the Title and URL (Website address) of the site  
you're currently viewing, and allows you to save it as a bookmark.  
Forward. Jumps forward a page to the previous page you viewed.  
Refresh. Reloads the current Web page.  
Instructions. Opens an instruction page.  
Exit Web. Closes the connection, leaving it dormant.  
Creating a Bookmark  
Bookmarks allow you to store the address of your favorite Websites  
for easy access at a later time.  
To create a bookmark:  
1. Go to the Web page you want to mark. (You can select  
Open Page from the menu and navigate directly to a Website by  
entering its URL.)  
2. Press Menu, scroll to Mark Page, and press Select.  
3. Use your keypad to edit the bookmark title and URL (if  
necessary) and select Save to save the bookmark.  
Bookmarking a page does not store the page contents, just its address.  
Some pages cannot be bookmarked. Whether a particular Web page  
may be marked is controlled by its creator.  
Note:  
Section 3B: PCS Vision  
171  
 
Accessing a Bookmark  
To access a bookmark:  
1. From a Web page, press Menu. (The Navigate pop-up menu  
is displayed.)  
2. Press  
. (The Bookmarks pop-up menu is displayed.)  
3. Scroll to highlight the bookmark you’d like to access and  
press Select.  
Deleting a Bookmark  
To delete a bookmark:  
1. From a Web page, press Menu. (The Navigate pop-up menu is  
displayed.)  
2. Press  
. (The Bookmarks pop-up menu is displayed.)  
3. Scroll to highlight the bookmark you’d like to delete and  
press Select.  
4. Scroll to Delete and press Select.  
5. Press OK to delete the bookmark.  
Going to a Specific Website  
To go to a particular Website by entering a URL (Website address):  
1. From a Web page, press Menu. (The Navigate pop-up menu is  
displayed.)  
2. Scroll down to Open Page and press Select.  
3. Use your keypad to enter the URL of the Website you wish to visit.  
4. Select Go and press Select.  
Not all Websites are viewable on your phone.  
Note:  
Reloading a Web Page  
To reload (refresh) a Web page:  
1. From a Web page, press Menu. (The Navigate pop-up menu is  
displayed.)  
2. Scroll down to Refresh and press Select.  
Section 3B: PCS Vision  
172  
     
Restarting the Web Browser  
If the Web browser appears to be malfunctioning or stops  
responding, you can usually fix the problem by simply exiting and  
restarting the browser.  
To restart the Web browser:  
1. Press and hold  
to exit the browser.  
2. From the standby mode, press to relaunch the browser.  
Section 3B: PCS Vision  
173  
SM  
PCS Business Connection  
Using PCS Business Connection  
PCS Business ConnectionSM Personal Edition gives you secure,  
real-time access to your Microsoft® Outlook® or Lotus Notes®  
company email, calendar, business directory, and personal contacts.  
You’ll have the features and functions of your Microsoft Outlook and  
Lotus Notes so you can view, create, reply to, and delete email;  
schedule appointments; and look up phone numbers in real time,  
anywhere on the Sprint Nationwide PCS Network.  
PCS Business Connection Personal Edition delivers the following:  
Business email access. Read, reply to, forward, delete, and  
compose your company email.  
Company directory and contacts. Search, view, call, and email  
contacts from your company's directory. Do all this and add/edit  
your personal contacts.  
Work calendar. Accept and decline meetings, view daily  
summaries and details, and navigate to various dates.  
Files/information on your PC. Browse folders, download, and view  
documents from any device using a PC browser or Pocket  
Internet Explorer.  
PCS Business Connection Personal Edition requires no hardware  
or software installation on your company’s network. Just install the  
PCS Business Connection Personal Edition software on your work  
PC. This allows data to be securely retrieved in real-time by your  
wireless device when connected to the Sprint Nationwide  
PCS Network. There is a monthly charge for PCS Business  
Connection and usage charges will also apply.  
When your work PC isn't on, you can share connections with your  
co-workers so that you always have access to your email, calendar, and  
contacts. Your data remains secure behind the corporate firewall, and  
any changes you make on your wireless device are instantly updated on  
your company server without the need to synchronize.  
Additional PCS Business Connection solutions are available for your  
company. For more details, visit www.businessconnection.sprintpcs.com.  
Section 3B: PCS Vision  
174  
   
PCS Vision FAQs  
How will I know when my phone is ready for PCS Vision service?  
Your User Name (for example, [email protected]) will display  
by selecting Settings, Phone details, User details, and User address.  
How do I sign-in for the first time?  
You are automatically signed in to access PCS Vision services when  
you turn on your phone.  
How do I know when my phone is connected to PCS Vision services?  
Your phone automatically connects when PCS Vision service is used  
or an incoming message arrives. Your phone will also display the  
icon. (Connecting takes about 10–12 seconds.)  
Can I make calls and use PCS Vision services at the same time?  
You cannot use voice and PCS Vision services simultaneously. If you  
receive a call while PCS Vision service is active, the call will be  
forwarded to voicemail. You can place an outgoing call anytime, but  
it will interrupt any in-progress PCS Vision session.  
When is my data connection active?  
Your connection is active when data is being transferred. Outgoing  
calls are allowed; incoming calls go directly to voicemail. When  
active, the  
icon scrolls on your phone’s display screen.  
When is my data connection dormant?  
If no data is received for 10 seconds, the connection goes dormant.  
When the connection is dormant, voice calls are allowed. (The  
connection may become active again quickly.) If no data is received  
for an extended period of time, the connection will terminate.  
Can I sign out of data services?  
You can sign out without turning off your phone; however you will not  
be able to browse the Web or use other PCS Vision services. While  
signed out, you can still place or receive phone calls, check voicemail,  
and use other voice services. You may sign in again at any time.  
To sign out from the phone standby mode:  
1. Press Menu, scroll to Settings, and press Select.  
2. Scroll to PCS Vision, press Select, scroll to Disable PCS Vision,  
and press Select.  
Section 3B: PCS Vision  
175  
   
Section 3C  
PCS Voice CommandSM  
In This Section  
With Sprint, the first wireless provider to offer innovative  
PCS Voice Command technology, reaching your friends, family, and  
co-workers has never been easier – especially when you’re on the go.  
You can even listen to Web-based information such as news, stock  
quotes, weather, sports, and much more. Your voice does it all with  
PCS Voice Command.  
This section outlines the PCS Voice Command service.  
Section 3C: PCS Voice Command  
176  
 
Getting Started With PCS Voice Command  
With PCS Voice Command:  
You can store all your contacts’ phone numbers, so you can  
simply say the name of the person you want to call.  
There’s no need to punch in a lot of numbers, memorize  
voicemail passwords, or try to dial while you’re driving.  
You can call anyone in your address book—even if you don’t  
remember their phone number.  
It’s Easy to Get Started  
Just dial  
from your PCS Vision Phone to activate the ser-  
vice and listen to the brief instructions directly from your phone.  
There is a monthly charge for PCS Voice Command.  
Beginning Fall 2004, please dial  
PCS Voice Command service. You will continue to dial  
calls using PCS Voice Command.  
to activate your  
Note:  
to place  
Section 3C: PCS Voice Command  
177  
     
Creating Your Own Address Book  
You can program up to 500 names into your personal address book,  
with each name having up to five phone numbers. That’s up to  
2,500 phone numbers, and with the advanced technology of  
PCS Voice Command, you can have instant access to all of them.  
There are four ways to update your address book:  
Use Voice Recordings. Simply dial  
and say, “Add name.”  
You will then be asked to say the name and number you want to  
add to your personal address book. Your address book can store  
up to 20 voice recorded names at once.  
On the Web. With your PC, go to www.talk.sprintpcs.com for a fully  
functional Web-based address book to create and update your contacts.  
Use an Existing Address Book. Automatically merge address books  
from desktop software applications with Sprint SyncSM Services for  
no additional charge. Simply click on the “Click to synchronize”  
button within your PCS Voice Command personal address book  
Call Directory Assistance. If you don’t have a computer or  
Internet access handy, you can have PCS Directory Assistance  
look up phone numbers for you and automatically add them to  
your address book. Just say “Call operator” and we’ll add two  
names and numbers to your address book for our standard  
directory assistance charge.  
Section 3C: PCS Voice Command  
178  
 
Making a Call With PCS Voice Command  
To make a call with PCS Voice Command:  
1. Press  
and create your address book once you’ve signed  
up for PCS Voice Command. (You’ll hear a tone followed by the  
prompt “Ready.)  
2. After the “Ready” prompt, simply say, in a natural voice,  
“Call” and the name of the person or the number you’d  
like to call. (For example, you can say, Call Jane Smith at  
work,” “Call John Baker on the mobile phone,” “Call 555-1234,”  
or “Call Bob Miller.)  
3. Your request will be repeated and you will be asked to verify.  
Say “Yes” to call the number or person. (The number will  
automatically be dialed.)  
- or -  
Say “No” if you wish to cancel.  
Keep in mind that PCS Voice Command recognizes not only your voice,  
but any voice, so that others can experience the same convenience if  
they use your phone.  
Tip:  
For more helpful hints on PCS Voice Command, including a list  
of recognized commands and an interactive tutorial, visit  
Section 3C: PCS Voice Command  
179  
   
Accessing Information Using  
PCS Voice Command  
To access information using PCS Voice Command:  
1. Press  
.
2. Say “Call the Web.” (To access, listen to and respond to email,  
once email has been set up, say “Call My Email.”)  
3. Choose from a listing of information categories like news,  
weather, sports, and more.  
PCS Voice Command is not available while roaming off the  
Sprint Nationwide PCS Network.  
Note:  
Section 3C: PCS Voice Command  
180  
 
Section 4  
Safety and Warranty  
Information  
 
Section 4A  
Safety  
In This Section  
Part of getting the most out of your PCS Vision Phone is learning how the  
phone works and how to care for it. This section outlines performance  
and safety guidelines that help you understand the basic features of  
your phone’s operation.  
Section 4A: Safety Guidelines  
182  
   
Getting the Most Out of Your Reception  
Keeping Tabs on Signal Strength  
The quality of each call you make or receive depends on the signal strength in your  
area. Your phone informs you of the current signal strength by displaying a number of  
bars next to the signal strength icon. The more bars displayed, the stronger the signal.  
If you’re inside a building, being near a window may give you better reception.  
Understanding the Power Save Feature  
If your phone is unable to find a signal after 15 minutes of searching, a Power Save  
feature is automatically activated. If your phone is active, it periodically rechecks  
service availability; you can also check it yourself by pressing any key. Anytime the  
Power Save feature is activated, a message is displayed on the screen. When a signal  
is found, your phone returns to standby mode.  
Understanding How Your Phone Operates  
Your phone is basically a radio transmitter and receiver. When it’s turned on, it  
receives and transmits radiofrequency (RF) signals. When you use your phone, the  
system handling your call controls the power level. This power can range from  
0.00001 watts to 0.433 watts in digital mode, depending upon in which band your  
phone operates.  
Knowing Radiofrequency Safety  
The design of your PCS Vision Phone complies with updated NCRP standards  
described below.  
In 1991-92, the Institute of Electrical and Electronics Engineers (IEEE) and the  
American National Standards Institute (ANSI) joined in updating ANSI’s 1982 standard  
for safety levels with respect to human exposure to RF signals. More than 120  
scientists, engineers and physicians from universities, government health agencies  
and industries developed this updated standard after reviewing the available body of  
research. In 1993, the Federal Communications Commission (FCC) adopted this  
updated standard in a regulation. In August 1996, the FCC adopted hybrid standard  
consisting of the existing ANSI/IEEE standard and the guidelines published by the  
National Council of Radiation Protection and Measurements (NCRP).  
Maintaining Your Phone’s Peak Performance  
There are several simple guidelines to operating your phone properly and  
maintaining safe, satisfactory service.  
Speak directly into the mouthpiece.  
Avoid exposing your phone and accessories to rain or liquid spills. If your  
phone does get wet, immediately turn the power off, remove the battery, and  
dry thoroughly.  
For optimal performance, store and use your phone between a temperature  
range of 23ºF and 140ºF (-5ºC and 60ºC).  
For the best care of your phone, only Sprint authorized personnel should service  
your phone and accessories. Faulty service may void the warranty.  
Note:  
Section 4A: Safety Guidelines  
183  
 
Maintaining Safe Use of and Access to  
Your Phone  
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD TO SERIOUS  
PERSONAL INJURY AND POSSIBLE PROPERTY DAMAGE  
Using Your Phone While Driving  
Talking on your phone while driving (or operating the phone without a hands-free  
device) is prohibited in some jurisdictions. Laws vary as to specific restrictions.  
Remember that safety always comes first. Obey all local laws.  
When using your phone in the car:  
Get to know your phone and its features, such as speed dial and redial.  
When available, use a hands-free device.  
Position your phone within easy reach.  
Let the person you are speaking to know you are driving; if necessary,  
suspend the call in heavy traffic or hazardous weather conditions.  
Do not take notes or look up phone numbers while driving.  
Dial sensibly and assess the traffic; if possible, place calls when stationary or  
before pulling into traffic.  
Do not engage in stressful or emotional conversations that may divert your  
attention from the road.  
Dial 911 to report serious emergencies. It’s free from your wireless phone.  
Use your phone to help others in emergencies.  
Call roadside assistance or a special non-emergency wireless number  
when necessary.  
Purchase an optional hands-free car kit at your local Sprint Store, or call the  
Tip:  
PCS Accessory HotlineSM at 1-800-974-2221 or by dialing # 2 2 2 on your PCS Vision Phone.  
Following Safety Guidelines  
To operate your phone safely and efficiently, always follow any special regulations in  
a given area. Turn your phone off in areas where use is forbidden or when it may  
cause interference or danger.  
Magnetic Materials  
Parts of the device are magnetic. Metallic materials may be attracted to the device,  
and persons with a hearing aid should not hold the device to the ear with the  
hearing aid. Always secure the device in its holder, because metallic materials may  
be attracted by the earpiece. Do not place credit cards or other magnetic storage  
media near the device, because information stored on them may be erased.  
Medical Devices  
Operation of any radio transmitting equipment, including wireless phones, may  
interfere with the functionality of inadequately protected medical devices. Consult a  
physician or the manufacturer of the medical device to determine if they are  
Section 4A: Safety Guidelines  
184  
 
adequately shielded from external RF energy or if you have any questions. Switch off  
your phone in health care facilities when any regulations posted in these areas  
instruct you to do so. Hospitals or health care facilities may be using equipment that  
could be sensitive to external RF energy  
Pacemakers  
Pacemaker manufacturers recommend a distance of 15.3 cm be maintained  
between a hand-held wireless phone and a pacemaker to avoid interference with  
the pacemaker. These recommendations are consistent with independent research  
and recommendations of Wireless Technology Research.  
Persons with pacemakers:  
Should always keep the phone at least 15.3 cm from their pacemaker when  
the phone is turned on  
Should not carry the phone in a breast pocket  
Should use the ear opposite the pacemaker to minimize the potential for  
interference  
Should turn off the phone immediately if there is any reason to suspect that  
interference is taking place  
Using Your Phone Near Other Electronic Devices  
Most modern electronic equipment is shielded from radiofrequency (RF) signals.  
However, RF signals from wireless phones may affect inadequately shielded  
electronic equipment.  
RF signals may affect improperly installed or inadequately shielded electronic  
operating systems and/or entertainment systems in motor vehicles. Check with the  
manufacturer or their representative to determine if these systems are adequately  
shielded from external RF signals. Also check with the manufacturer regarding any  
equipment that has been added to your vehicle.  
Consult the manufacturer of any personal medical devices, such as pacemakers and  
hearing aids, to determine if they are adequately shielded from external RF signals.  
Always turn off the phone in health care facilities and request permission before  
using the phone near medical equipment.  
Note:  
Turning Off Your Phone Before Flying  
Turn off your phone before boarding any aircraft. To prevent possible interference  
with aircraft systems, the U.S. Federal Aviation Administration (FAA) regulations  
require you to have permission from a crew member to use your phone while the  
plane is on the ground. To prevent any risk of interference, FCC regulations prohibit  
using your phone while the plane is in the air. Follow all restrictions.  
Turning Off Your Phone in Dangerous Areas  
To avoid interfering with blasting operations, turn your phone off when in a blasting  
area or in other areas with signs indicating two-way radios should be turned off.  
Construction crews often use remote-control RF devices to set off explosives.  
Turn your phone off when you're in any area that has a potentially explosive  
atmosphere. Although it's rare, your phone and accessories could generate sparks.  
Section 4A: Safety Guidelines  
185  
Sparks can cause an explosion or fire, resulting in bodily injury or even death. These  
areas are often, but not always, clearly marked. They include:  
Fueling areas such as gas stations.  
Below deck on boats.  
Fuel or chemical transfer or storage facilities.  
Areas where the air contains chemicals or particles such as grain, dust, or  
metal powders.  
Any other area where you would normally be advised to turn off your  
vehicle’s engine.  
Never transport or store flammable gas, liquid, or explosives in the compartment of  
your vehicle that contains your phone or accessories.  
Note:  
Water Resistance  
Your phone is not water-resistant. Keep it dry.  
Backup Copies  
Remember to make back-up copies or keep a written record of all important  
information stored in your phone.  
Connecting to Other Devices  
When connecting to any other device, read its user guide for detailed safety  
instructions. Do not connect incompatible devices.  
Accessories and Batteries  
Use only approved accessories and batteries. Do not connect incompatible products.  
Qualified Service  
Only qualified personnel may install or repair this product.  
Emergency Calls  
Ensure the phone is switched on and in service. Press  
as many times as  
needed to clear the display and return to the main screen. Key in the emergency  
number, then press  
permission to do so.  
. Give your location. Do not end the call until given  
Restricting Children’s Access to your Phone  
Your PCS Phone is not a toy. Children should not be allowed to play with it because  
they could hurt themselves and others, damage the phone or make calls that  
increase your phone bill.  
Section 4A: Safety Guidelines  
186  
Caring for the Battery  
Protecting Your Battery  
The guidelines listed below help you get the most out of your battery’s  
performance.  
Use only batteries and chargers approved by the phone manufacturer (for  
example, the Nokia ACP-7, Nokia LCH-12, or the Nokia ACP-12). These  
chargers are designed to maximize battery life. Using other batteries or  
chargers voids your warranty and may cause damage. Do not connect  
incompatible products.  
In order to avoid damage, only charge the battery in temperatures that  
range from 32ºF to 113ºF (0ºC to 45ºC).  
Don’t use the battery charger in direct sunlight or in high humidity areas,  
such as the bathroom.  
Never dispose of the battery by incineration. Dispose of batteries according  
to local regulations (for example, recycling). Do not dispose of batteries in  
household waste. Do not dispose of batteries in a fire.  
Keep the metal contacts on top of the battery clean.  
Don’t attempt to disassemble or short-circuit the battery.  
The battery may need recharging if it has not been used for a long period of time.  
It’s best to replace the battery when it no longer provides acceptable  
performance. It can be recharged hundreds of times before it needs replacing.  
Don’t store the battery in high temperature areas for long periods of time. It’s  
best to store the battery in temperatures that range from 32º F to 104º F (0º C  
to 40º C). A phone with a hot or cold battery may temporarily not work, even  
when the battery is fully charged. Battery performance is particularly limited  
in temperatures well below freezing  
Do not short-circuit the battery. Accidental short-circuiting can occur when a  
metallic object (coin, clip, or pen) causes direct connection of the positive  
(+) and negative (-) terminals (metal contacts) of the battery, such as when  
you carry a spare battery in your pocket or purse. Short-circuiting the  
terminals may damage the battery or the connecting object.  
Disposal of Lithium Ion (LiIon) Batteries  
For safe disposal options of your LiIon batteries, contact your nearest Sprint-  
authorized service center.  
Special Note: Be sure to dispose of your battery properly. In some areas, the  
disposal of batteries in household or business trash may be prohibited.  
For safety, do not handle a damaged or leaking LiIon battery.  
Note:  
Section 4A: Safety Guidelines  
187  
     
Acknowledging Special Precautions and the  
FCC Notice  
FCC Notice  
This phone may cause TV or radio interference if used in close proximity to  
receiving equipment. The FCC can require you to stop using the phone if such  
interference cannot be eliminated.  
Vehicles using liquefied petroleum gas (propane or butane) must comply with the  
National Fire Protection Standard (NFPA-58). For a copy of this standard, contact the  
National Fire Protections Association, One Batterymarch Park, Quincy, MA 02269,  
Attn.: Publication Sales Division.  
Cautions  
Any changes or modifications to your phone not expressly approved in this  
document could void your warranty for this equipment and void your authority to  
operate this equipment. Only use approved batteries and chargers. The use of any  
unauthorized accessories may be dangerous and void the phone warranty if said  
accessories cause damage or a defect to the phone.  
Although your phone is quite sturdy, it is a complex piece of equipment and can be  
broken. Avoid dropping, hitting, bending or sitting on it.  
Body-Worn Operation  
To maintain compliance with FCC RF exposure guidelines, if you wear a handset on  
your body, use the Sprint approved carrying case, holster, or belt clip that contains  
no metal and positions the handset a minimum of 7/8 inch (2.2 centimeters) from  
the body. If you do not use a body-worn accessory, ensure the antenna is at least 7/  
8 inch (2.2 centimeters) from your body when transmitting.  
Use of non-Sprint approved accessories may violate FCC RF exposure guidelines.  
For more information about RF exposure, visit the FCC Website at www.fcc.gov.  
Section 4A: Safety Guidelines  
188  
   
Specific Absorption Rates (SAR) for Wireless Phones  
The SAR is a value that corresponds to the relative amount of RF energy absorbed by  
the user of a wireless handset.  
The SAR value of a phone is the result of an extensive testing, measuring and  
calculation process. It does not represent how much RF the phone emits. All phone  
models are tested at their highest value in strict laboratory settings. But when in  
operation, the SAR of a phone can be substantially less than the level reported to the  
FCC. This is because of a variety of factors including its proximity to a base station  
antenna, phone design and other factors. What is important to remember is that  
each phone meets strict federal guidelines. Variations in SARs do not represent a  
variation in safety.  
All phones must meet the federal standard, which incorporates a substantial margin  
of safety. As stated above, variations in SAR values between different model phones  
do not mean variations in safety. SAR values at or below the federal standard of  
1.6 W/kg are considered safe for use by the public.  
The highest reported SAR values of the PM-6225 by Nokia are:  
Amps mode (Part 22):  
Head: 0.99 W/kg; Body-worn: 0.97 W/kg  
PCS mode (Part 24):  
Head: 1.12 W/kg; Body-worn: 0.54 W/kg  
For body-worn operation, position the phone at least 7/8 inch (2.2 centimeters)  
away from your body.  
FCC Radiofrequency Emission  
This phone meets the FCC Radiofrequency Emission Guidelines.  
FCC ID number: QMNRH-27. More information on the phone's SAR can be found  
from the following FCC Website: http://www.fcc.gov/oet/fccid.  
Section 4A: Safety Guidelines  
189  
Consumer Information on Wireless Phones  
(The following information comes from a consumer information Website  
jointly sponsored by the U.S. Food and Drug Administration (FDA) and the  
Federal Communications Commission (FCC), entitled “Cell Phone Facts:  
Consumer Information on Wireless Phones.” The information reproduced  
herein is dated July 29, 2003. For further updates, please visit the Website:  
What is radiofrequency energy (RF)?  
Radiofrequency (RF) energy is another name for radio waves. It is one form of  
electromagnetic energy that makes up the electromagnetic spectrum. Some of  
the other forms of energy in the electromagnetic spectrum are gamma rays, x-  
rays and light. Electromagnetic energy (or electromagnetic radiation) consists  
of waves of electric and magnetic energy moving together (radiating) through  
space. The area where these waves are found is called an electromagnetic field.  
Radio waves are created due to the movement of electrical charges in antennas.  
As they are created, these waves radiate away from the antenna. All  
electromagnetic waves travel at the speed of light. The major differences  
between the different types of waves are the distances covered by one cycle of  
the wave and the number of waves that pass a certain point during a set time  
period. The wavelength is the distance covered by one cycle of a wave. The  
frequency is the number of waves passing a given point in one second. For any  
electromagnetic wave, the wavelength multiplied by the frequency equals the  
speed of light. The frequency of an RF signal is usually expressed in units called  
hertz (Hz). One Hz equals one wave per second. One kilohertz (kHz) equals one  
thousand waves per second, one megahertz (MHz) equals one million waves per  
second, and one gigahertz (GHz) equals one billion waves per second.  
RF energy includes waves with frequencies ranging from about 3000 waves per  
second (3 kHz) to 300 billion waves per second (300 GHz). Microwaves are a  
subset of radio waves that have frequencies ranging from around 300 million  
waves per second (300 MHz) to three billion waves per second (3 GHz).  
How is radiofrequency energy used?  
Probably the most important use of RF energy is for telecommunications. Radio  
and TV broadcasting, wireless phones, pagers, cordless phones, police and fire  
department radios, point-to-point links and satellite communications all rely on  
RF energy.  
Other uses of RF energy include microwave ovens, radar, industrial heaters and  
sealers, and medical treatments. RF energy, especially at microwave  
frequencies, can heat water. Since most food has a high water content,  
microwaves can cook food quickly. Radar relies on RF energy to track cars and  
airplanes as well as for military applications. Industrial heaters and sealers use  
RF energy to mold plastic materials, glue wood products, seal leather items  
such as shoes and pocketbooks, and process food. Medical uses of RF energy  
include pacemaker monitoring and programming.  
Section 4A: Safety Guidelines  
190  
   
How is radiofrequency radiation measured?  
RF waves and RF fields have both electrical and magnetic components. It is  
often convenient to express the strength of the RF field in terms of each  
component. For example, the unit “volts per meter” (V/m) is used to measure  
the electric field strength, and the unit “amperes per meter” (A/m) is used to  
express the magnetic field strength. Another common way to characterize an  
RF field is by means of the power density. Power density is defined as power  
per unit area. For example, power density can be expressed in terms of  
milliwatts (one thousandth of a watt) per square centimeter (mW/cm2 or  
microwatts (one millionth of a watt) per square centimeter (µW/cm2).  
The quantity used to measure how much RF energy is actually absorbed by the  
body is called the Specific Absorption Rate or SAR. The SAR is a measure of the  
rate of absorption of RF energy. It is usually expressed in units of watts per  
kilogram (W/kg) or milliwatts per gram (mW/g).  
What biological effects can be caused by RF energy?  
The biological effects of radiofrequency energy should not be confused with  
the effects from other types of electromagnetic energy.  
Very high levels of electromagnetic energy, such as is found in X-rays and  
gamma rays can ionize biological tissues. Ionization is a process where  
electrons are stripped away from their normal locations in atoms and  
molecules. It can permanently damage biological tissues including DNA, the  
genetic material. Ionization only occurs with very high levels of  
electromagnetic energy such as X-rays and gamma rays. Often the term  
radiation is used when discussing ionizing radiation (such as that associated  
with nuclear power plants).  
The energy levels associated with radiofrequency energy, including both radio  
waves and microwaves, are not great enough to cause the ionization of atoms  
and molecules. Therefore, RF energy is a type of non-ionizing radiation. Other  
types of non-ionizing radiation include visible light, infrared radiation (heat)  
and other forms of electromagnetic radiation with relatively low frequencies.  
Large amounts of RF energy can heat tissue. This can damage tissues and  
increase body temperatures. Two areas of the body, the eyes and the testes, are  
particularly vulnerable to RF heating because there is relatively little blood flow  
in them to carry away excess heat.  
The amount of RF radiation routinely encountered by the general public is too  
low to produce significant heating or increased body temperature. Still, some  
people have questions about the possible health effects of low levels of RF  
energy. It is generally agreed that further research is needed to determine what  
effects actually occur and whether they are dangerous to people. In the  
meantime, standards-setting organizations and government agencies are  
continuing to monitor the latest scientific findings to determine whether  
changes in safety limits are needed to protect human health.  
FDA, EPA and other US government agencies responsible for public health and  
safety have worked together and in connection with WHO to monitor  
developments and identify research needs related to RF biological effects.  
Section 4A: Safety Guidelines  
191  
What levels of RF energy are considered safe?  
Various organizations and countries have developed standards for exposure to  
radiofrequency energy. These standards recommend safe levels of exposure for  
both the general public and for workers. In the United States, the FCC has used  
safety guidelines for RF environmental exposure since 1985.  
The FCC guidelines for human exposure to RF electromagnetic fields are  
derived from the recommendations of two expert organizations, the National  
Council on Radiation Protection and Measurements (NCRP) and the Institute of  
Electrical and Electronics Engineers (IEEE). In both cases, the  
recommendations were developed by scientific and engineering experts drawn  
from industry, government, and academia after extensive reviews of the  
scientific literature related to the biological effects of RF energy.  
Many countries in Europe and elsewhere use exposure guidelines developed by  
the International Commission on Non-Ionizing Radiation Protection (ICNIRP).  
The ICNIRP safety limits are generally similar to those of the NCRP and IEEE,  
with a few exceptions. For example, ICNIRP recommends different exposure  
levels in the lower and upper frequency ranges and for localized exposure from  
certain products such as hand-held wireless telephones. Currently, the World  
Health Organization is working to provide a framework for international  
harmonization of RF safety standards.  
The NCRP, IEEE, and ICNIRP all have identified a whole-body Specific  
Absorption Rate (SAR) value of 4 watts per kilogram (4 W/kg) as a threshold  
level of exposure at which harmful biological effects may occur. Exposure  
guidelines in terms of field strength, power density and localized SAR were  
then derived from this threshold value. In addition, the NCRP, IEEE, and ICNIRP  
guidelines vary depending on the frequency of the RF exposure. This is due to  
the finding that whole-body human absorption of RF energy varies with the  
frequency of the RF signal. The most restrictive limits on whole-body exposure  
are in the frequency range of 30-300 MHz where the human body absorbs RF  
energy most efficiently. For products that only expose part of the body, such as  
wireless phones, exposure limits in terms of SAR only are specified.  
The exposure limits used by the FCC are expressed in terms of SAR, electric  
and magnetic field strength, and power density for transmitters operating at  
frequencies from 300 kHz to 100 GHz. The specific values can be found in two  
FCC bulletins, OET Bulletins 56 and 65: http://www.fcc.gov/oet/info/documents/  
Why has the FCC adopted guidelines for RF exposure?  
The FCC authorizes and licenses products, transmitters, and facilities that  
generate RF and microwave radiation. It has jurisdiction over all transmitting  
services in the U.S. except those specifically operated by the Federal  
Government. While the FCC does not have the expertise to determine radiation  
exposure guidelines on its own, it does have the expertise and authority to  
recognize and adopt technically sound standards promulgated by other expert  
agencies and organizations, and has done so. (Our joint efforts with the FDA in  
developing this website is illustrative of the kind of inter-agency efforts and  
consultation we engage in regarding this health and safety issue.)  
Section 4A: Safety Guidelines  
192  
Under the National Environmental Policy Act of 1969 (NEPA), the FCC has  
certain responsibilities to consider whether its actions will significantly affect  
the quality of the human environment. Therefore, FCC approval and licensing  
of transmitters and facilities must be evaluated for significant impact on the  
environment. Human exposure to RF radiation emitted by FCC-regulated  
transmitters is one of several factors that must be considered in such  
environmental evaluations. In 1996, the FCC revised its guidelines for RF  
exposure as a result of a multi-year proceeding and as required by the  
Telecommunications Act of 1996.  
Radio and television broadcast stations, satellite-earth stations, experimental  
radio stations and certain wireless communication facilities are required to  
undergo routine evaluation for RF compliance when they submit an  
application to the FCC for construction or modification of a transmitting facility  
or renewal of a license. Failure to comply with the FCC's RF exposure  
guidelines could lead to the preparation of a formal Environmental Assessment,  
possible Environmental Impact Statement and eventual rejection of an  
application. Technical guidelines for evaluating compliance with the FCC  
RF safety requirements can be found in the FCC's OET Bulletin 65.  
Low-powered, intermittent, or inaccessible RF transmitters and facilities are  
normally excluded from the requirement for routine evaluation for RF  
exposure. These exclusions are based on standard calculations and  
measurement data indicating that a transmitting station or equipment operating  
under the conditions prescribed is unlikely to cause exposures in excess of the  
guidelines under normal conditions of use. Such exclusions are not exclusions  
from compliance, but, rather, exclusions from routine evaluation. The FCC's  
policies on RF exposure and categorical exclusion can be found in Section  
1.1307(b) of the FCC's Rules and Regulations [(47 CFR 1.1307(b)].  
How can I obtain the Specific Absorption Rate (SAR) value for my  
wireless phone?  
The FCC requires that wireless phones sold in the United States demonstrate  
compliance with human exposure limits adopted by the FCC in 1996. The  
relative amount of RF energy absorbed by a wireless telephone-user is given by  
the Specific Absorption Rate (SAR), as explained above. The FCC requires  
wireless phones to comply with a safety limit of 1.6 watts per kilogram (1.6 W/  
kg) in terms of SAR.  
Information on SAR for a specific phone model can be obtained for many  
recently manufactured phones using the FCC identification (ID) number for  
that model. The FCC ID number is usually printed somewhere on the case of  
the phone. Sometimes it may be necessary to remove the battery pack to find  
the number. Once you have the ID number, go to the following Web address:  
www.fcc.gov/oet/fccid. On this page, you will see instructions for entering the  
FCC ID number. Type the FCC ID number exactly as requested (the Grantee  
Code is the first three characters, the Equipment Product Code is the rest of the  
FCC ID number). Then click on “Start Search.” The “Grant of Equipment  
Authorization” for your telephone should appear. Read through the grant for  
the section on “SAR Compliance,Certification of Compliance with FCC Rules  
Section 4A: Safety Guidelines  
193  
for RF Exposure” or similar language. This section should contain the value(s)  
for typical or maximum SAR for your phone.  
Phones and other products authorized since June 2, 2000, should have the  
maximum SAR levels noted directly on the “Grant of Equipment Authorization.”  
For phones and products authorized between about mid-1998 and June 2000,  
detailed information on SAR levels is typically found in the exhibits associated  
with the grant. Once a grant is accessed, the exhibits can be viewed by clicking  
on “View Exhibit.” Grants authorized prior to 1998 are not part of the electronic  
database but, rather, have been documented in the form of paper records.  
The FCC database does not list phones by model number. However, consumers  
may find SAR information from other sources as well. Some wireless phone  
manufacturers make SAR information available on their own Web sites. In addition,  
some non-government Web sites provide SARs for specific models of wireless  
phones. However, the FCC has not reviewed these sites and makes no guarantees  
of their accuracy. Finally, phones certified by the Cellular Telecommunications and  
Internet Association (CTIA) are required to provide SAR information to consumers  
in the instructional materials that come with the phones.  
Do hands-free kits for wireless phones reduce risks from exposure to  
RF emissions?  
Since there are no known risks from exposure to RF emissions from wireless  
phones, there is no reason to believe that hands-free kits reduce risks. Hands-  
free kits can be used with wireless phones for convenience and comfort. These  
systems reduce the absorption of RF energy in the head because the phone,  
which is the source of the RF emissions, will not be placed against the head.  
On the other hand, if the phone is mounted against the waist or other part of  
the body during use, then that part of the body will absorb more RF energy.  
Wireless phones marketed in the U.S. are required to meet safety requirements  
regardless of whether they are used against the head or against the body. Either  
configuration should result in compliance with the safety limit.  
Do wireless phone accessories that claim to shield the head from  
RF radiation work?  
Since there are no known risks from exposure to RF emissions from wireless  
phones, there is no reason to believe that accessories that claim to shield the  
head from those emissions reduce risks. Some products that claim to shield the  
user from RF absorption use special phone cases, while others involve nothing  
more than a metallic accessory attached to the phone. Studies have shown that  
these products generally do not work as advertised. Unlike “hand-free” kits,  
these so-called “shields” may interfere with proper operation of the phone. The  
phone may be forced to boost its power to compensate, leading to an increase  
in RF absorption. In February 2002, the Federal trade Commission (FTC)  
charged two companies that sold devices that claimed to protect wireless  
phone users from radiation with making false and unsubstantiated claims.  
According to FTC, these defendants lacked a reasonable basis to substantiate  
their claim.  
Section 4A: Safety Guidelines  
194  
What are wireless telephone base stations?  
Fixed antennas used for wireless telecommunications are referred to as cellular  
base stations, cell stations, PCS (“Personal Communications Service”) stations  
or telephone transmission towers. These base stations consist of antennas and  
electronic equipment. Because the antennas need to be high in the air, they are  
often located on towers, poles, water tanks, or rooftops. Typical heights for  
freestanding base station towers are 50-200 feet.  
Some base stations use antennas that look like poles, 10 to 15 feet in length, that  
are referred to as “omni-directional” antennas. These types of antennas are usually  
found in rural areas. In urban and suburban areas, wireless providers now more  
commonly use panel or sector antennas for their base stations. These antennas  
consist of rectangular panels, about 1 by 4 feet in dimension. The antennas are  
usually arranged in three groups of three antennas each. One antenna in each  
group is used to transmit signals to wireless phones, and the other two antennas in  
each group are used to receive signals from wireless phones.  
At any base station site, the amount of RF energy produced depends on the  
number of radio channels (transmitters) per antenna and the power of each  
transmitter. Typically, 21 channels per antenna sector are available. For a typical  
cell site using sector antennas, each of the three transmitting antennas could be  
connected to up to 21 transmitters for a total of 63 transmitters. However, it is  
unlikely that all of the transmitters would be transmitting at the same time.  
When omni-directional antennas are used, a cellular base station could  
theoretically use up to 96 transmitters, but this would be very unusual, and,  
once again, it is unlikely that all transmitters would be in operation  
simultaneously. Base stations used for PCS communications generally require  
fewer transmitters than those used for cellular radio transmissions, since PCS  
carriers usually have a higher density of base station antenna sites.  
Are wireless telephone base stations safe?  
The electromagnetic RF signals transmitted from base station antennas stations  
travel toward the horizon in relatively narrow paths. For example, the radiation  
pattern for an antenna array mounted on a tower can be likened to a thin  
pancake centered around the antenna system. The individual pattern for a  
single array of sector antennas is wedge-shaped, like a piece of pie. As with all  
forms of electromagnetic energy, the power decreases rapidly as one moves  
away from the antenna. Therefore, RF exposure on the ground is much less  
than exposure very close to the antenna and in the path of the transmitted  
radio signal. In fact, ground-level exposure from such antennas is typically  
thousands of times less than the exposure levels recommended as safe by  
expert organizations. So exposure to nearby residents would be well within  
safety margins.  
Cellular and PCS base stations in the United States are required to comply with  
limits for exposure recommended by expert organizations and endorsed by  
government agencies responsible for health and safety. Measurements made  
near cellular and PCS base station antennas mounted on towers have confirmed  
that ground-level exposures are typically thousands of times less than the  
exposure limits adopted by the FCC. In fact, in order to be exposed to levels at  
or near the FCC limits for cellular or PCS frequencies an individual would  
Section 4A: Safety Guidelines  
195  
essentially have to remain in the main transmitted radio signal (at the height of  
the antenna) and within a few feet from the antenna. This is, of course, very  
unlikely to occur.  
When cellular and PCS antennas are mounted on rooftops, RF levels on that roof  
or on others near by would probably be greater than those typically encountered  
on the ground. However, exposure levels approaching or exceeding safety  
guidelines should be encountered only very close to or directly in front of the  
antennas. In addition, for sector-type antennas, typically used for such rooftop  
base stations, RF levels to the side and in back of these antennas are insignificant.  
General guidelines on antenna installations and circumstances that might give  
rise to a concern about an facility's conformance with FCC regulations can be  
found in A Local Government Official's Guide to Transmitting Antenna RF  
Emission Safety: Rules, Procedures, and Practical Guidance. This Guide can be  
Who regulates exposure to radiation from microwave ovens, television  
sets and computer monitors?  
The Food and Drug Administration is responsible for protecting the public  
from harmful radiation emissions from these consumer products.  
Does the FCC routinely monitor radiofrequency radiation from antennas?  
The FCC does not have the resources or the personnel to routinely monitor the  
emissions for all the thousands of transmitters that are subject to FCC  
jurisdiction. However, the FCC does have measurement instrumentation for  
evaluating RF levels in areas that may be accessible to the public or to workers.  
If there is evidence for potential non-compliance with FCC exposure guidelines  
for a FCC-regulated facility, staff from the FCC's Office of Engineering and  
Technology or the FCC Enforcement Bureau can conduct and investigation,  
and, if appropriate, perform actual measurements. Circumstances that could  
give rise to a concern about an facility's conformance with FCC regulations can  
be found in A Local Government Official's Guide to Transmitting Antenna RF  
Emission Safety: Rules, Procedures, and Practical Guidance. This Guide can be  
accessed at: http://www.fcc.gov/oet/rfsafety. Potential exposure problems should  
be brought to the FCC's attention by contacting the FCC RF Safety Program at:  
202-418-2464 or by email: [email protected]v.  
Does the FCC maintain a database that includes information on the location  
and technical parameters of all the transmitting towers it regulates?  
Each of the FCC Bureaus maintains its own licensing database system for the  
service(s) it regulates (e.g., television, cellular service, satellite earth stations.)  
The FCC issues two types of licenses: site specific and market based. In the  
case of site specific licensed facilities, technical operating information is  
collected from the licensee as part of the licensing process. However, in the  
case of market based licensing (e.g., PCS, cellular), the licensee is granted the  
authority to operate a radio communications system in a geographic area using  
as many facilities as are required, and the licensee is not required to provide the  
FCC with specific location and operating parameters of these facilities.  
Section 4A: Safety Guidelines  
196  
Information on site specific licensed facilities can be found the “General Menu  
The various FCC Bureaus also publish on at least a weekly basis, bulk extracts  
of their licensing databases. Each licensing database has its own unique file  
structure. These extracts consist of multiple, very large files. The FCC's Office  
of Engineering and Technology (OET) maintains an index to these databases at  
http://www.fcc.gov/oet/info/database/fadb.html. Entry points into the various  
databases include frequency, state/county, latitude/longitude, call-sign and  
licensee name. For further information on the Commission's existing databases,  
you can contact Donald Campbell at [email protected] or 202-418-2405.  
Can local and state governmental bodies establish limits for  
RF exposure?  
Although some local and state governments have enacted rules and regulations  
about human exposure to RF energy in the past, the Telecommunications Act  
of 1996 requires the Federal Government to control human exposure to RF  
emissions. In particular, Section 704 of the Act states that, “No State or local  
government or instrumentality thereof may regulate the placement,  
construction, and modification of personal wireless service facilities on the  
basis of the environmental effects of radio frequency emissions to the extent  
that such facilities comply with the Commission's regulations concerning such  
emissions.Further information on federal authority and FCC policy is available  
in a fact sheet from the FCC's Wireless Telecommunications Bureau at  
Do wireless phones pose a health hazard?  
The available scientific evidence does not show that any health problems are  
associated with using wireless phones. There is no proof, however, that  
wireless phones are absolutely safe. Wireless phones emit low levels of  
radiofrequency energy (RF) in the microwave range while being used. They  
also emit very low levels of RF when in the stand-by mode. Whereas high levels  
of RF can produce health effects (by heating tissue), exposure to low level RF  
that does not produce heating effects causes no known adverse health effects.  
Many studies of low level RF exposures have not found any biological effects.  
Some studies have suggested that some biological effects may occur, but such  
findings have not been confirmed by additional research. In some cases, other  
researchers have had difficulty in reproducing those studies, or in determining  
the reasons for inconsistent results.  
What is FDA's role concerning the safety of wireless phones?  
Under the law, FDA does not review the safety of radiation-emitting consumer  
products such as wireless phones before they can be sold, as it does with new  
drugs or medical devices. However, the agency has authority to take action if  
wireless phones are shown to emit radiofrequency energy (RF) at a level that is  
hazardous to the user. In such a case, FDA could require the manufacturers of  
wireless phones to notify users of the health hazard and to repair, replace or  
recall the phones so that the hazard no longer exists.  
Section 4A: Safety Guidelines  
197  
Although the existing scientific data do not justify FDA regulatory actions,  
FDA has urged the wireless phone industry to take a number of steps,  
including the following:  
Support needed research into possible biological effects of RF of the  
type emitted by wireless phones;  
Design wireless phones in a way that minimizes any RF exposure to the  
user that is not necessary for device function; and  
Cooperate in providing users of wireless phones with the best possible  
information on possible effects of wireless phone use on human health  
FDA belongs to an interagency working group of the federal agencies that have  
responsibility for different aspects of RF safety to ensure coordinated efforts at  
the federal level. The following agencies belong to this working group:  
National Institute for Occupational Safety and Health  
Environmental Protection Agency  
Federal Communications Commission  
Occupational Safety and Health Administration  
National Telecommunications and Information Administration  
The National Institutes of Health participates in some interagency working  
group activities, as well.  
FDA shares regulatory responsibilities for wireless phones with the Federal  
Communications Commission (FCC). All phones that are sold in the United States  
must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA  
and other health agencies for safety questions about wireless phones.  
FCC also regulates the base stations that the wireless phone networks rely  
upon. While these base stations operate at higher power than do the wireless  
phones themselves, the RF exposures that people get from these base stations  
are typically thousands of times lower than those they can get from wireless  
phones. Base stations are thus not the primary subject of the safety questions  
discussed in this document.  
What kinds of phones are the subject of this update?  
The term “wireless phone” refers here to hand-held wireless phones with built-  
in antennas, often called “cell,” “mobile,” or “PCS” phones. These types of  
wireless phones can expose the user to measurable radiofrequency energy (RF)  
because of the short distance between the phone and the user's head. These RF  
exposures are limited by Federal Communications Commission safety  
guidelines that were developed with the advice of FDA and other federal health  
and safety agencies. When the phone is located at greater distances from the  
user, the exposure to RF is drastically lower because a person's RF exposure  
decreases rapidly with increasing distance from the source. The so-called  
“cordless phones,” which have a base unit connected to the telephone wiring  
in a house, typically operate at far lower power levels, and thus produce RF  
exposures well within the FCC's compliance limits.  
Section 4A: Safety Guidelines  
198  
What are the results of the research done already?  
The research done thus far has produced conflicting results, and many studies  
have suffered from flaws in their research methods. Animal experiments  
investigating the effects of radiofrequency energy (RF) exposures characteristic  
of wireless phones have yielded conflicting results that often cannot be  
repeated in other laboratories. A few animal studies, however, have suggested  
that low levels of RF could accelerate the development of cancer in laboratory  
animals. However, many of the studies that showed increased tumor  
development used animals that had been genetically engineered or treated with  
cancer-causing chemicals so as to be pre-disposed to develop cancer in the  
absence of RF exposure. Other studies exposed the animals to RF for up to  
22 hours per day. These conditions are not similar to the conditions under  
which people use wireless phones, so we don't know with certainty what the  
results of such studies mean for human health.  
Three large epidemiology studies have been published since December 2000.  
Between them, the studies investigated any possible association between the  
use of wireless phones and primary brain cancer, glioma, meningioma, or  
acoustic neuroma, tumors of the brain or salivary gland, leukemia, or other  
cancers. None of the studies demonstrated the existence of any harmful health  
effects from wireless phone RF exposures. However, none of the studies can  
answer questions about long-term exposures, since the average period of  
phone use in these studies was around three years.  
What research is needed to decide whether RF exposure from wireless  
phones poses a health risk?  
A combination of laboratory studies and epidemiological studies of people  
actually using wireless phones would provide some of the data that are needed.  
Lifetime animal exposure studies could be completed in a few years. However,  
very large numbers of animals would be needed to provide reliable proof of a  
cancer promoting effect if one exists. Epidemiological studies can provide data  
that is directly applicable to human populations, but 10 or more years' follow-  
up may be needed to provide answers about some health effects, such as  
cancer. This is because the interval between the time of exposure to a cancer-  
causing agent and the time tumors develop - if they do - may be many, many  
years. The interpretation of epidemiological studies is hampered by difficulties  
in measuring actual RF exposure during day-to-day use of wireless phones.  
Many factors affect this measurement, such as the angle at which the phone is  
held, or which model of phone is used.  
What is FDA doing to find out more about the possible health effects of  
wireless phone RF?  
FDA is working with the U.S. National Toxicology Program and with groups of  
investigators around the world to ensure that high priority animal studies are  
conducted to address important questions about the effects of exposure to  
radiofrequency energy (RF).  
FDA has been a leading participant in the World Health Organization  
International Electromagnetic Fields (EMF) Project since its inception in 1996.  
Section 4A: Safety Guidelines  
199  
An influential result of this work has been the development of a detailed  
agenda of research needs that has driven the establishment of new research  
programs around the world. The Project has also helped develop a series of  
public information documents on EMF issues.  
FDA and the Cellular Telecommunications & Internet Association (CTIA) have a  
formal Cooperative Research and Development Agreement (CRADA) to do  
research on wireless phone safety. FDA provides the scientific oversight,  
obtaining input from experts in government, industry, and academic  
organizations. CTIA-funded research is conducted through contracts to  
independent investigators. The initial research will include both laboratory  
studies and studies of wireless phone users. The CRADA will also include a  
broad assessment of additional research needs in the context of the latest  
research developments around the world.  
What steps can I take to reduce my exposure to radiofrequency energy  
from my wireless phone?  
If there is a risk from these products--and at this point we do not know that  
there is--it is probably very small. But if you are concerned about avoiding even  
potential risks, you can take a few simple steps to minimize your exposure to  
radiofrequency energy (RF). Since time is a key factor in how much exposure a  
person receives, reducing the amount of time spent using a wireless phone will  
reduce RF exposure.  
If you must conduct extended conversations by wireless phone every  
day, you could place more distance between your body and the  
source of the RF, since the exposure level drops off dramatically with  
distance. For example, you could use a headset and carry the wireless  
phone away from your body or use a wireless phone connected to a  
remote antenna.  
Again, the scientific data do not demonstrate that wireless phones are harmful.  
But if you are concerned about the RF exposure from these products, you can  
use measures like those described above to reduce your RF exposure from  
wireless phone use.  
What about children using wireless phones?  
The scientific evidence does not show a danger to users of wireless phones,  
including children and teenagers. If you want to take steps to lower exposure  
to radiofrequency energy (RF), the measures described above would apply to  
children and teenagers using wireless phones. Reducing the time of wireless  
phone use and increasing the distance between the user and the RF source will  
reduce RF exposure.  
Some groups sponsored by other national governments have advised that children  
be discouraged from using wireless phones at all. For example, the government in  
the United Kingdom distributed leaflets containing such a recommendation in  
December 2000. They noted that no evidence exists that using a wireless phone  
causes brain tumors or other ill effects. Their recommendation to limit wireless  
phone use by children was strictly precautionary; it was not based on scientific  
evidence that any health hazard exists.  
Section 4A: Safety Guidelines  
200  
What about wireless phone interference with medical equipment?  
Radiofrequency energy (RF) from wireless phones can interact with some  
electronic devices. For this reason, FDA helped develop a detailed test method  
to measure electromagnetic interference (EMI) of implanted cardiac  
pacemakers and defibrillators from wireless telephones. This test method is  
now part of a standard sponsored by the Association for the Advancement of  
Medical instrumentation (AAMI). The final draft, a joint effort by FDA, medical  
device manufacturers, and many other groups, was completed in late 2000.  
This standard will allow manufacturers to ensure that cardiac pacemakers and  
defibrillators are safe from wireless phone EMI.  
FDA has tested hearing aids for interference from handheld wireless phones  
and helped develop a voluntary standard sponsored by the Institute of  
Electrical and Electronic Engineers (IEEE). This standard specifies test methods  
and performance requirements for hearing aids and wireless phones so that  
that no interference occurs when a person uses a “compatible” phone and a  
“compatible” hearing aid at the same time. This standard was approved by the  
IEEE in 2000.  
FDA continues to monitor the use of wireless phones for possible  
interactions with other medical devices. Should harmful interference be  
found to occur, FDA will conduct testing to assess the interference and  
work to resolve the problem.  
Which other federal agencies have responsibilities related to potential  
RF health effects?  
Certain agencies in the Federal Government have been involved in monitoring,  
researching or regulating issues related to human exposure to RF radiation.  
These agencies include the Food and Drug Administration (FDA), the  
Environmental Protection Agency (EPA), the Occupational Safety and Health  
Administration (OSHA), the National Institute for Occupational Safety and  
Health (NIOSH), the National Telecommunications and Information  
Administration (NTIA) and the Department of Defense (DOD).  
By authority of the Radiation Control for Health and Safety Act of 1968, the  
Center for Devices and Radiological Health (CDRH) of the FDA develops  
performance standards for the emission of radiation from electronic products  
including X-ray equipment, other medical devices, television sets, microwave  
ovens, laser products and sunlamps. The CDRH established a product  
performance standard for microwave ovens in 1971 limiting the amount of RF  
leakage from ovens. However, the CDRH has not adopted performance  
standards for other RF-emitting products. The FDA is, however, the lead federal  
health agency in monitoring the latest research developments and advising  
other agencies with respect to the safety of RF-emitting products used by the  
public, such as cellular and PCS phones.  
The FDA's microwave oven standard is an emission standard (as opposed to an  
exposure standard) that allows specific levels of microwave leakage (measured at  
five centimeters from the oven surface). The standard also requires ovens to have  
two independent interlock systems that prevent the oven from generating  
microwaves the moment that the latch is released or the door of the oven is  
Section 4A: Safety Guidelines  
201  
opened. The FDA has stated that ovens that meet its standards and are used  
according to the manufacturer's recommendations are safe for consumer and  
industrial use. More information is available from: www.fda.gov/cdrh.  
The EPA has, in the past, considered developing federal guidelines for public  
exposure to RF radiation. However, EPA activities related to RF safety and  
health are presently limited to advisory functions. For example, the EPA now  
chairs an Inter-agency Radiofrequency Working Group, which coordinates RF  
health-related activities among the various federal agencies with health or  
regulatory responsibilities in this area.  
OSHA is responsible for protecting workers from exposure to hazardous  
chemical and physical agents. In 1971, OSHA issued a protection guide for  
exposure of workers to RF radiation [29 CFR 1910.97]. However, this guide  
was later ruled to be only advisory and not mandatory. Moreover, it was based  
on an earlier RF exposure standard that has now been revised. At the present  
time, OSHA uses the IEEE and/or FCC exposure guidelines for enforcement  
purposes under OSHA's “general duty clause” (for more information see:  
NIOSH is part of the U.S. Department of Health and Human Services. It  
conducts research and investigations into issues related to occupational  
exposure to chemical and physical agents. NIOSH has, in the past, undertaken  
to develop RF exposure guidelines for workers, but final guidelines were never  
adopted by the agency. NIOSH conducts safety-related RF studies through its  
Physical Agents Effects Branch in Cincinnati, Ohio.  
The NTIA is an agency of the U.S. Department of Commerce and is responsible  
for authorizing Federal Government use of the RF electromagnetic spectrum.  
Like the FCC, the NTIA also has NEPA responsibilities and has considered  
adopting guidelines for evaluating RF exposure from U.S. Government  
transmitters such as radar and military facilities.  
The Department of Defense (DOD) has conducted research on the biological  
effects of RF energy for a number of years. This research is now conducted  
primarily at the U.S. Air Force Research Laboratory located at Brooks Air Force  
Base, Texas. The DOD Web site for RF biological effects information is listed  
with other sites in conjunction with a question on other sources of  
information, below.  
Who funds and carries out research on the biological effects of  
RF energy?  
Research into possible biological effects of RF energy is carried out in  
laboratories in the United States and around the world. In the U.S., most  
research has been funded by the Department of Defense, due to the extensive  
military use of RF equipment such as radar and high-powered radio  
transmitters. In addition, some federal agencies responsible for health and  
safety, such as the Environmental Protection Agency (EPA) and the U.S. Food  
and Drug Administration (FDA), have sponsored and conducted research in this  
area. At the present time, most of the non-military research on biological  
effects of RF energy in the U.S. is being funded by industry organizations. More  
research is being carried out overseas, particularly in Europe.  
Section 4A: Safety Guidelines  
202  
In 1996, the World Health Organization (WHO) established the International  
EMF Project to review the scientific literature and work towards resolution of  
health concerns over the use of RF technology. WHO maintains a Web site that  
provides extensive information on this project and about RF biological effects  
and research (www.who.ch/peh-emf).  
FDA, EPA and other US government agencies responsible for public health and  
safety have worked together and in connection with WHO to monitor  
developments and identify research needs related to RF biological effects.  
How does FCC Audit Cell Phone RF?  
After FCC grants permission for a particular cellular telephone to be marketed,  
FCC will occasionally conduct “post-grant” testing to determine whether  
production versions of the phone are being produced to conform with FCC  
regulatory requirements. The manufacturer of a cell phone that does not meet  
FCC's regulatory requirements may be required to remove the cell phone from  
use and to refund the purchase price or provide a replacement phone, and may  
be subject to civil or criminal penalties. In addition, if the cell phone presents a  
risk of injury to the user, FDA may also take regulatory action. The most  
important post-grant test, from a consumer's perspective, is testing of the RF  
emissions of the phone. FCC measures the Specific Absorption Rate (SAR) of  
the phone, following a very rigorous testing protocol. As is true for nearly any  
scientific measurement, there is a possibility that the test measurement may be  
less than or greater than the actual RF emitted by the phone. This difference  
between the RF test measurement and actual RF emission is because test  
measurements are limited by instrument accuracy, because test measurement  
and actual use environments are different, and other variable factors. This  
inherent variability is known as “measurement uncertainty.When FCC  
conducts post-grant testing of a cell phone, FCC takes into account any  
measurement uncertainty to when determining whether regulatory action is  
appropriate. This approach ensures that when FCC takes regulatory action, it  
will have a sound, defensible scientific basis.  
FDA scientific staff reviewed the methodology used by FCC to measure cell  
phone RF, and agreed it is an acceptable approach, given our current  
understanding of the risks presented by cellular phone RF emissions. RF  
emissions from cellular phones have not been shown to present a risk of injury  
to the user when the measured SAR is less than the safety limits set by FCC (an  
SAR of 1.6 w/kg). Even in a case where the maximum measurement  
uncertainty permitted by current measurement standards was added to the  
maximum permissible SAR, the resulting SAR value would be well below any  
level known to produce an acute effect. Consequently, FCC's approach with  
measurement uncertainty will not result in consumers being exposed to any  
known risk from the RF emitted by cellular telephones.  
FDA will continue to monitor studies and literature reports concerning acute  
effects of cell phone RF, and concerning chronic effects of long-term exposure  
to cellular telephone RF (that is, the risks from using a cell phone for many  
years). If new information leads FDA to believe that a change to FCC's  
measurement policy may be appropriate, FDA will contact FCC and both  
agencies will work together to develop a mutually-acceptable approach.  
Section 4A: Safety Guidelines  
203  
Owner’s Record  
The model number, regulatory number and serial number are located on a  
nameplate inside the battery compartment. Record the serial number in the space  
provided below. This will be helpful if you need to contact us about your phone in  
the future.  
Model: PCS Vision Picture Phone PM-6225 by Nokia  
Serial No.:  
User’s Guide Proprietary Notice  
CDMA Technology is licensed by QUALCOMM Incorporated under one or more of  
the following patents:  
4901307 5109390 5267262 5416797 5506865 5544196  
5657420 5101501 5267261 5414796 5504773 5535239  
5600754 5778338 5228054 5337338 5710784 5056109  
5568483 5659569 5490165 5511073  
T9 Text Input is licensed by Tegic Communications and is covered by U.S. Pat.  
5,818,437, U.S. Pat. 5,953,541, U.S. Pat. 6,011,554 and other patents pending.  
T9 text input software Copyright © 1999-2004. Tegic Communications, Inc. All  
rights reserved.  
Manufactured or sold under one or more of the following US patents:  
D405445 D406583 D414189 D405784 D423515 4558302  
4901307 4969192 5056109 5101501 5109390 5265119  
5440597 5444816 5491718 5596571 5642377 5642377  
5699482 5701392 5708656 5737323 5754976 5758278  
5790957 5793744 5796757 5802465 5821891 5854978  
5859843 5887250 5887252 5889770 5929813 5990740  
5991627 6005889 6009129 6025802 6029065 6047071  
6055264 6072787 6076181 6078570 6084471 6088342  
6148209 6154455 6167038 6205325 6253075 6292474  
6332083 6377813 6414640 6434186 6459689 6463031  
6466173 6480155 6480700 6486835 6496150 6570909  
6580771 6587685 RE32580  
Section 4A: Safety Guidelines  
204  
   
Accessibility information  
Nokia is committed to making mobile phones easy to use for all individuals,  
Website at www.nokiaaccessibility.com.  
TTY and TDD device compatibility  
Your Nokia phone is equipped with a universal 2.5mm accessory jack that can be  
used to connect any “cellular ready” or “cellular compatible” TTY/TDD device’s cable  
to your phone.  
Once your TTY/TDD device is connected to your phone, you must use the phone  
menu (Menu > Enhancement settings > Accessory > TTY) to enable the  
TTY/TDD mode.  
Note:  
For more information on TTY access, see “TTY Use With PCS Service From Sprint”  
Section 4A: Safety Guidelines  
205  
     
Section 4B  
Terms & Conditions and  
Manufacturer’s Warranty  
In This Section  
Your PCS Vision Phone has been designed to provide you with reliable,  
worry-free service. If for any reason you have a problem with your  
equipment, please refer to the manufacturer’s warranty.  
This section contains the Terms and Conditions of Service for your  
PCS Phone and Service and the manufacturer’s warranty for your  
PCS Phone.  
Section 4B: Terms & Conditions / Warranty  
206  
   
Terms and Conditions  
Terms and Conditions of Services  
(Effective as of November 24, 2003 until replaced)  
Thanks for choosing Sprint. These terms and conditions are part of your  
agreement with Sprint for PCS Services.  
The terms and conditions included with your PCS Phone may not be the most  
current version. For the most current version of the terms and conditions, please  
visit our website at www.sprintpcs.com or call PCS Customer Service Solutions at 1-  
888-211-4PCS. If you activated PCS Services before the effective date of these  
terms and conditions, these terms and conditions replace and supersede any  
previous terms and conditions.  
If you have questions about your PCS Services, please visit our  
Website at www.sprintpcs.com or call PCS Customer Service Solutions at  
1-888-211-4PCS (4727).  
Para solicitar esta literatura en español, por favor contactar a  
1-888-211-4PCS(4727).  
Agreement. Your agreement (“Agreement”) with Sprint Spectrum L.P. and any of its  
affiliates doing business as Sprint providing PCS Services (“Services”) to you is made  
up of these Terms and Conditions of Service (“Terms”) and the Service Plan that we  
agree to provide you. Your “Service Plan” is described in our marketing materials,  
and includes the terms, rates and features we set for that Service Plan. In the  
agreement, we use the words “we,” “us,” “our” or “Sprint” to refer to Sprint  
Spectrum L.P. and its affiliates doing business as Sprint. You accept the agreement  
when you activate PCS Services or make any attempt to use our PCS Services (for  
example, attempting to place any call while on or roaming off the Sprint  
Nationwide PCS Network, using data services, etc.). We may change the Agreement  
at any time by giving you prior notice. Any changes to the Agreement are effective  
when we publish them. If you use our Services or make any payment to us on or  
after the effective date of the changes, you accept the changes. If we change a  
material term of the Agreement and that change has a material adverse effect on  
you, you may terminate the Agreement without an early termination fee by calling 1-  
888-211-4727 within 30 days after the invoice date of the first invoice your receive  
after the changes go into effect. You understand and agree that taxes, Universal  
Service fees and other charges imposed by the government or based on government  
calculations may increase or decrease on a monthly basis, and that this paragraph  
does not apply to any increases in such taxes, Universal Service fees and other  
charges.  
Provision of Service. Your purchase of a PCS Phone or other equipment does not  
mean that we must provide Services to you. We may decide not to provide  
Services to you for any lawful reason. We may request that you provide us with  
any information we reasonably require to determine whether you qualify for  
Services. Services in some areas are managed and provided under contract with  
Section 4B: Terms & Conditions / Warranty  
207  
   
Sprint by independent affiliates with access to the Sprint Nationwide PCS  
Network. Some Services may not be available or may operate differently in certain  
affiliate markets or other areas.  
Credit Verification. You must have and maintain satisfactory credit to receive and  
continue to receive Services. We will verify your credit before agreeing to provide  
Services to you and we may verify your credit at any time while we provide  
Services to you. Credit verification may include a review of credit reports that we  
receive from credit bureaus. If at any time we determine, in our sole discretion,  
that payment for Services may not be made when due, we may suspend Services  
and require that you provide payment on account or a guarantee of payment  
before we resume Services.  
Service Plan. You may be eligible for a fixed length PCS Service Plan (“Term  
Service Plan”) or for a month-to-month Service Plan (“Non-Term Service Plan”). We  
determine the Service Plan for which you qualify. Except as permitted by the  
Agreement, you must maintain service with us on your Term Service Plan for the  
minimum term associated with that Term Service Plan. We may offer non-identical  
Service Plans to different individuals or entities. Services and coverage under some  
Service Plans may be more limited than available under other Service Plans. Your  
Service Plan sets out the charges for Services and is your Service Plan until that  
Service Plan is changed, you switch to a different Service Plan, or your Services  
terminate. Based on your credit rating or other factors, we may require that you  
make a deposit, prepayment, or a series of deposits or prepayments, or be subject  
to an account spending limit, before Services are activated or maintained.  
Changing Service Plans. If you are on a Non-Term Service Plan, you may change  
to a different Service Plan for which you qualify. Any change is effective at the  
start of your next full invoicing cycle unless otherwise specified by us at the time  
that you place your change order. If you change or add a different Service Plan or  
service feature and the change is effective prior to the start of your next full  
invoicing cycle, you will be invoiced a prorated amount. We may require a service  
charge for implementing any change directed by you in addition to the charges  
associated with the Service Plan or optional service features you select. If you are  
on a Term Service Plan and you want to change your service plan, you may be  
required to accept a new Term Service Plan and we may require you to pay the  
early termination fee set out in your Service Plan or other fee.  
Termination. Non-Term Service Plan. If you are on a Non-Term Service Plan, you  
may terminate Services at any time by giving us notice. Subject to the terms of this  
Agreement, we may terminate Services at any time, with or without notice. If your  
Service has been suspended due to non-payment, you may be charged a  
reactivation fee. We may deactivate any Number before you receive notice of  
termination without liability to you. Termination by either of us may be with or  
without cause.  
Termination. Term Service Plan. EXCEPT AS PERMITTED BY THE AGREEMENT, IF  
YOU TERMINATE YOUR TERM SERVICE PLAN BEFORE THE END OF THE TERM,  
OR IF WE TERMINATE SERVICES FOR CAUSE BEFORE THE END OF THE TERM,  
YOU WILL BE REQUIRED TO PAY THE EARLY TERMINATION FEE ASSOCIATED  
Section 4B: Terms & Conditions / Warranty  
208  
WITH YOUR TERM SERVICE PLAN. No early termination fee is charged if  
you terminate a Term Service Plan in accordance with the return policy  
associated with your Term Service Plan. After the expiration of the term, the  
Terms relating to Non-Term Service Plans apply.  
Termination. General. Regardless of whether you have a Non-Term or a Term  
Service Plan, we may terminate or suspend Services to you without liability  
if: (1) you breach any provision of this Agreement (including if you fail to  
pay any charges for Services); or (2) you fail to pay any charges due us for  
equipment or otherwise. If Services are terminated before the end of your  
current invoicing cycle, we will not prorate the monthly recurring charge to  
the date of termination, and you will not receive a credit or refund for any  
unused minutes in your Service Plan.  
Use of Services and Equipment; Availability. You must be at least 18 years  
old to subscribe to our Services. We may require you to provide proof of  
your age and identity. If you are under 18 years old you may be eligible for  
certain Services that have Account Spending Limits if a person 18 years or  
older is also named as a subscriber on the Account. Your PCS Phone will not  
accept the services of any wireless provider other than Sprint (but see  
Roaming). Services and equipment may not be used for any unlawful,  
fraudulent or abusive purpose. By requesting Services, you agree that you  
will not use Services and equipment in any unlawful, fraudulent or abusive  
manner. You may not resell or lease Services or equipment to anyone.  
Coverage. Most services are only available within the operating range of the  
Sprint Nationwide PCS Network (also see Roaming). Coverage is not  
available everywhere. Coverage and quality of Services may be affected by  
conditions within or beyond our control, including network problems,  
signal strength, your equipment, and atmospheric, geographic, or  
topographic conditions. We do not guarantee service availability or that  
there will be no interruptions or delays in Services (e.g., dropped calls,  
blocked calls, etc.).  
Number. We may change the phone number ("Number") assigned to your  
PCS device without compensation by giving you prior notice. You do not  
own the Number. You may not modify the Number we program into any  
phone or other equipment, duplicate the Number to any device other than  
that authorized by us or, except as allowed for by law, transfer (port) the  
Number to any other individual or entity. If you transfer the Number to  
another carrier, the terms of the Agreement (including the rights and  
obligations set forth in the Termination paragraphs) still apply. In certain  
instances, you may transfer a Number from another carrier to Sprint. Sprint  
does not in any way guarantee that such transfers to (or from) Sprint will be  
successful. If a transfer to Sprint is not successful, you will be responsible  
any discounts provided to you with the purchase of your PCS device. See  
our printed in-store materials or visit www.sprintpcs.com for additional  
important information on Number transfers.  
209  
Phone Activation Fee. You may be required to pay a non-refundable phone  
activation fee when you activate a new Number, have us switch a Number to a  
different phone, have your current Number changed, we activate a different  
phone on your existing account or your Service Plan says so.  
Charges. For most forms of wireless Service, your usage will be charged from the  
time you first initiate contact between your phone or other wireless device and  
the network until the network connection is broken, whether or not you are  
successful in connecting with the service with which you seek to connect, even if  
the connection is later broken or dropped. An exception is that you are not  
charged for voice calls that are not completed. You are charged for completed  
calls to your Number from the time shortly before the phone starts ringing until  
the call is terminated. You will be charged peak rates for the entire duration of  
calls initiated during the peak time periods applicable to your Service. You will be  
charged off-peak rates for the entire duration of calls initiated during the off-peak  
time periods applicable to your Service. In addition to these usage charges, you  
may be charged for recurring monthly service charges, applicable local and long-  
distance toll charges, other usage charges, (including voicemail access, call  
waiting, call forwarding, etc.), connection fees, roaming charges, directory  
assistance, call completion charges, account review and management charges,  
optional features you select at an extra cost, surcharges related to government  
programs, and taxes. Charges for most Services are incurred in one-minute  
increments, with partial minutes of use rounded up to the next highest minute.  
You must pay, by each invoice due date, all charges for Services provided to the  
Number for each phone or other equipment that our records show you activated,  
no matter who actually uses or has possession of the phone or other equipment at  
the time Services are provided.  
PCS Vision (Third Generation) Wireless Charges. For PCS Vision wireless  
services, you will be charged on a per kilobyte basis for data used, rather than for  
airtime used. As long as your PCS Vision device is connected to the Sprint  
Nationwide PCS Network ("PCS Vision network"), you will be incurring data usage  
charges. You are responsible for all data activity from and directed to your PCS  
Phone, regardless of who initiates the activity. We will invoice you for all data  
directed to the internet address (or "IP address") assigned to your device in a given  
PCS Vision session, regardless of whether your device actually receives the data.  
You will be charged for data usage initiated by others as well as those you initiate.  
You will be charged for additional data used in transporting and routing on the  
network. You will be charged for partial and interrupted data downloads or other  
use, including re-sent data, and for unsuccessful attempts to reach websites and  
use other applications and services, including those resulting from dropped  
network connections. If you use a Premium Service (including services provided  
by third parties but for which you are billed on your PCS Invoice), you will be  
charged for data used in transport and routing in addition to the charge for the  
Premium Service. The amount of data used and charged to you will vary widely,  
depending upon the specific PCS Vision wireless application or other service you  
use, the amount of data used in the specific application or service, and network  
congestion and other matters. For this and other reasons, estimates of data usage -  
Section 4B: Terms & Conditions / Warranty  
210  
for example, the size of downloadable files - will vary from what you actually use.  
You cannot receive incoming calls while using third generation services. Data  
usage will be rounded up to the next whole kilobyte. Kilobyte usage will be  
rounded up to the next full cent. Rounding up will occur at the end of each  
separate session or each clock hour (at the top of each hour), if the session spans  
more than 1 clock hour. When traveling on our PCS Vision network, a session may  
be ended and new session initiated, although no interruption to the actual data  
session will occur. Your invoice will not separately identify the number of  
kilobytes attributable to your use of specific sites, sessions or services used.  
PCS Vision Premium Services. Your PCS Vision wireless services may allow you to  
access or download premium content for an additional charge. Certain PCS Vision  
services (e.g., games, ringers and screen savers) primarily contain premium  
services content. Access to and downloading of premium content is not included  
with PCS Vision services. The additional charges for this premium content will be  
billed to you on your PCS Invoice. You will be charged for this content (at rates and  
charges specified at the time of access or download) that will be in addition to data  
usage charges you will incur while connected to the enhanced PCS Vision  
network. We provide no warranties and make no representations or claims with  
regard to third-party Premium Services. In certain instances, subject to the terms of  
the content purchased, we may delete premium and non-premium items  
downloaded to available storage areas (e.g., your vault), including any pictures,  
games and other content. We may limit the amount of Premium Services you may  
purchase in a specific timeframe (month, week, day, or other time period). We may  
suspend your use of Premium Services without prior consent or notice if we have  
reason to suspect fraudulent or unauthorized use of your Premium Services  
account, but we make no assurances that we will suspend your account.  
Other Terms Applicable to PCS Vision Usage. Use of PCS Vision wireless services  
requires the purchase of a separate third generation wireless compatible phone or  
other device and is subject to any software, memory, storage or other limitation in  
the phone or other equipment. Not all applications and services work, or work  
the same, on all third generation wireless phones and devices. Check the materials  
accompanying your phone or device to determine which applications and  
services it will support. PCS Vision wireless services are not available while off the  
PCS Vision network. PCS Vision services are not available for server devices or  
host computer applications, other systems that drive continuous heavy traffic or  
data sessions, or as substitutes for private lines or frame relay connections.  
Unlimited PCS Vision plans/options are only available with phones or PCS smart  
phones where the device is not being used as a modem in connection with other  
equipment (e.g., computers, PDAs, etc.) through use of connection kits or other  
phone-to-computer/PDA accessories, or Bluetooth or other wireless technology.  
Sprint reserves the right to deny or to terminate service without notice for any  
misuse. Sprint is not responsible for any opinions, advice, statements, services  
applications or other information provided by third parties and accessible through  
PCS Vision wireless services. Neither Sprint nor its vendors or licensors  
guarantees the accuracy, completeness or usefulness of information that is  
obtained through the PCS Vision wireless services. You are responsible for  
Section 4B: Terms & Conditions / Warranty  
211  
evaluating such content. Use of certain PCS Vision wireless services, including  
some messaging services, may result in the disclosure to others of your email  
address and other information about you in connection with your internet usage.  
Your accessing of, or use of, third party sites or services accessible PCS Vision  
wireless services may require the disclosure of information about you, subject to  
the policies of those sites and services. You consent to receiving advertising,  
warnings, alerts and other messages, including broadcast messages. Your access to  
PCS Vision wireless services is controlled by a password.  
Voice Command. PCS Voice Command is an optional service that allows you to  
place calls by using speech recognition technology. Calls to 911 or similar  
emergency numbers cannot be placed through the Voice Command feature.  
Airtime and applicable long distance charges for a call completed from your  
Number using the Voice Command feature begin when you press or activate the  
TALK or similar key(s) and end when your call is terminated by hitting the END  
key or by returning to the Voice Command platform. If you initiate and complete  
another call without leaving the Voice Command platform, a separate charge for  
that call will begin from the time the previous call was terminated. Airtime and  
applicable long distance charges will be applied to the entire length of a  
completed call initiated from Voice Command. Using Directory Assistance to  
input names into your Voice Command address book will incur additional charges.  
Invoicing. Invoicing cycles are approximately 30 days in length. Invoicing cycles  
and dates may change from time to time. Except as otherwise provided in your  
Service Plan, monthly recurring charges (MRCs) are invoiced one invoicing cycle in  
advance. Charges for Services are usually invoiced as soon as possible after the  
charges accrue. We may, however, invoice you for usage and charges occurring  
before the invoicing cycle being invoiced, if they were not previously invoiced. If  
you are invoiced for usage incurred during a prior invoicing cycle, those minutes  
will be applied to your Service Plan minutes for the current invoicing cycle.  
However, if you change your PCS Service Plan between the time the usage was  
incurred and the beginning of the current invoicing cycle, those minutes from the  
prior invoicing cycle will be charged at the rate per minute for usage over included  
minutes provided in the Service Plan in effect at the time the usage was incurred.  
Payment. If you have authorized payment for Services or equipment by credit card  
or by debiting a bank account, no additional notice or consent is required before we  
invoice the credit card or debit the bank account for all amounts due to us or billed  
by us on behalf of a third party. You must promptly notify us of any change in your  
invoicing address or of the credit card or bank account used for payment. We  
reserve the right to require payment by money order, cashier's check or other  
secured form of payment. If we take action to receive payment beyond invoicing  
you for charges for Services or equipment, you must pay our costs and expenses of  
collection, including attorneys' fees and expenses, the fees of any collection agency  
and court costs. If we act as an invoicing agent for a third-party service provider,  
payments received are first applied to amounts due and owing to us and any  
remaining amounts are applied to sums due and owing to the third-party service  
provider. We may immediately charge an additional fee for any check or other  
Section 4B: Terms & Conditions / Warranty  
212  
negotiable instrument endorsed by you and returned unpaid by a financial  
institution for any reason. You may be charged fees for certain methods of payment.  
Late Payment Charges. Payment is past due if we do not receive it by the due date  
shown on your invoice. Any payment for Services and equipment not made when  
due accrues late charges until paid at the rate of 5% per month or at the highest  
rate allowed by law. Acceptance of late or partial payments (even if marked “paid  
in full”) does not waive our right to collect all amounts that you owe us. If your  
Service has been suspended due to non-payment, you may be charged a  
reactivation fee.  
Disputed Charges. You must raise any dispute that you have about any charges  
invoiced to you within 15 days of the date of the invoice or you have accepted the  
invoice. You may notify us of any dispute by notifying PCS Customer Service  
Solutions. Calls to our sales or general business offices are not notice of a dispute. If  
disputed invoice procedures are described on the invoice, you must follow them.  
Account Spending Limit. If we agree to provide Services to you on an Account  
Spending Limit basis, we will tell you your Account Spending Limit before we start  
Services to your Number, or as reasonably practicable after the limit is imposed. If  
we require a deposit for you to establish or keep Services on an Account Spending  
Limit basis, we will hold the deposit as partial guarantee of payment for Services  
(see Deposits). Charges for Services accrue against your Account Spending Limit as  
they are incurred. We may charge an initial ASL start up fee. We may charge a  
monthly ASL service fee, in addition to your recurring monthly service charge. We  
may suspend Services to your Number without prior notice to you when your  
account balance reaches your Account Spending Limit. Services are restored when  
you have paid any past due balance and pay a specified minimum amount to reduce  
your account balance below your Account Spending Limit. We may change this  
minimum amount at any time upon notice to you. You may pay any past due balance  
and the minimum amount by any method authorized by Sprint. Contact PCS  
Customer Service Solutions for information about authorized methods of making  
these payments. We may charge you a fee for calls that involve our live customer  
care services. If we provide Services to you on an Account Spending Limit basis,  
Services and coverage may be limited in certain ways. You must pay all charges for  
Services even if they exceed the amount of your Account Spending Limit.  
Clear Pay. If we agree to provide Services to you as a Clear Pay customer, we may  
suspend Services to your Number without prior notice to you immediately when  
your bill becomes past due. Even if your bill is not past due, we may suspend  
services if your unpaid usage exceeds $125 or another amount to be determined  
by your past credit or usage history. If we require a deposit for you to establish or  
keep Services as a Clear Pay customer, we will hold the deposit as partial  
guarantee of payment for Services (see Deposits, below). Contact PCS Customer  
Service Solutions for information about authorized methods of making these  
payments. We may charge you a fee for calls that involve our live customer care  
services. If we provide Services to you on as a Clear Pay basis, Services and  
coverage may be limited in certain ways. You must pay all charges for Services  
whether or not your Services are suspended or terminated.  
Section 4B: Terms & Conditions / Warranty  
213  
Deposits. If we require a deposit for you to establish or keep Services, we will hold  
the deposit as partial guarantee of payment for Services. We may change the  
deposit amount at any time to reflect revised estimated monthly charges based  
upon your usage. A deposit may not be used to pay any invoice (unless it is used to  
pay a final invoice) or delay payment. The deposit amount, the length of time we  
hold the deposit and changes to the deposit amount are determined based on your  
credit and payment history. The rate of interest, if any, on the deposit is subject to  
change. We may mix deposits with our other funds. If Services are terminated for  
any reason, we may, without notice to you, apply your deposit toward payment of  
outstanding charges and return any excess to you at your last known address  
within 75 days after termination of Services. If the U.S. Postal Service cannot  
deliver the money to you and returns it to us, we will hold it for you for one year  
from the date of return and, during that period, we may charge a servicing fee  
against the deposit balance. Any money held during this one-year period will not  
accrue interest for your benefit. You forfeit any portion of the money left after the  
one-year period.  
Wireless Web and Voice Portal Services. Wireless Web Services are part of the  
Services that can be obtained through Sprint. Wireless Web Services are not  
available in all markets or while roaming off the Sprint Nationwide PCS Network.  
Use of Wireless Web Services requires an Internet-ready PCS Phone or certain  
other equipment (or both) and is subject to any memory, storage or other  
limitation in the phone or other equipment. Wireless Web Services are not  
available on PCS Vision phones or devices. The Caller ID blocking feature is not  
available when using Wireless Web Services. Any use of Wireless Web Services  
deducts from your Service Plan minutes. For data calls (including Wireless Web  
and Voice Portal calls) that are attempted, but not completed, you are charged for  
the time during which the network attempts to connect the call. You are charged  
for time spent connected to the Wireless Web or Voice Portal, including time  
spent browsing on the Internet or Voice Portal and reviewing or scrolling through  
Internet information on-line while still connected to the Sprint Nationwide PCS  
Network. Not all Internet sites can be accessed and you may receive an error  
message if you attempt to access a site that cannot be accessed through Wireless  
Web Services. You are also charged for Wireless Web connections to review your  
PCS account information. Wireless Web Services are not available with all Service  
Plans. Sprint is not responsible for any opinions, advice, statements, services or  
other information provided by third-parties and accessible through Wireless Web  
Services or Voice Portal Services. Neither Sprint nor its vendors or licensors  
guarantees the accuracy, completeness or usefulness of information that is  
obtained through the Wireless Web Services or Voice Portal Services. You are  
responsible for evaluating such content.  
Taxes and Surcharges. We invoice you for taxes, fees and other charges levied by  
or remitted directly to federal, state or local authorities, or foreign government on  
Services including, without limitation, sales, gross receipts, use, and excise taxes.  
If you claim any tax exemption, you must provide us with a valid tax-exempt  
document. Any tax exemption applies only from the date we receive a valid tax-  
exempt document. We also invoice you for fees that we collect and remit to the  
Section 4B: Terms & Conditions / Warranty  
214  
government such as Universal Service, and for surcharges that we collect and  
keep to pay for the costs of complying with government mandates such as  
number pooling and portability, and Enhanced 911 service. These charges are  
neither taxes nor government imposed assessments.  
Roaming. Calls made while off the Sprint Nationwide PCS Network are “roaming”  
calls. Your PCS Phone is specifically designed and engineered to work only on the  
Sprint Nationwide PCS Network. It works on another CDMA PCS provider's  
system only when a roaming agreement is in place between Sprint and the other  
providers. If your PCS Phone is a dual-mode phone, it works on both a CDMA PCS  
provider's system (in addition to the Sprint Nationwide PCS Network) and a  
wireless analog telecommunications provider's system only when roaming  
agreements are in place between Sprint and the other providers. If we do not have  
a roaming agreement in place, you may be able to place roaming calls “manually”  
by using a valid credit card. If there is a gap or other interruption of coverage  
within a PCS coverage area that prevents connection with the Sprint Nationwide  
PCS Network and your dual-band phone is set to roam automatically when outside  
PCS coverage, you may incur roaming fees within a PCS coverage area. Certain  
features and services may not be available when roaming (including PCS Vision,  
voicemail, call waiting, call forwarding, etc.).  
Phones and Other Equipment. Phones and other equipment may be purchased and  
returned as provided in the purchase documents. We are not the manufacturer of  
the phones or other equipment. The only warranties on the phones or other  
equipment are any limited warranties extended by the manufacturers. We have no  
liability in connection with the phones and other equipment or for the  
manufacturers' acts or omissions.  
Lost or Stolen Equipment. If your phone or other equipment is lost or stolen, you  
must notify us by calling PCS Customer Service Solutions. You are responsible for  
all charges for Services provided to the Number for the lost or stolen equipment  
before you notify us of the loss or theft. We will deactivate Services to the Number  
upon notification to us of any loss or theft. You may be required to provide  
evidence of the loss or theft (for example, a police report or sworn statement). If  
the equipment is later found, we may require that you exchange it for another  
phone or other equipment before we reactivate Services (if we do reactivate  
Services), as well as require you to pay a reactivation fee. We will deactivate  
Services to any Number without prior notice to you if we suspect any unlawful or  
fraudulent use of the Number. You agree to cooperate reasonably with us in  
investigating suspected unlawful or fraudulent use.  
Messages. You will incur airtime usage charges when accessing your voicemail  
from your PCS Phone. You may also incur charges in accessing text messages from  
your PCS Phone. You may access your voicemail without incurring airtime usage  
charges by checking your voicemail from a wireline phone. We may impose limits  
on the number of voicemail or text message that can be retained through your  
PCS account. Audible or visual indicators of text or voicemail messages, including  
mailbox icons on your PCS Phone, may not always provide an up to date  
Section 4B: Terms & Conditions / Warranty  
215  
indication of new messages. In certain instances, you may be required to manually  
reset or clear your mailbox indicator.  
Caller ID. If you do not want people you call to receive the Number assigned to  
your phone, you must call PCS Customer Service Solutions for information about  
automatic Caller ID blocking. The Number assigned to your phone can be blocked  
on a per-call basis by dialing *67 + Destination Number + TALK (or similar key), but  
Caller ID delivery resumes on the next call you make. Caller ID display on incoming  
calls to your Number depends on receiving the information from the calling party.  
TTY Access. A TTY (also known as TDD or Text Telephone) is a telecommunications  
device that allows people who are deaf or hard of hearing, or who have speech or  
language disabilities, to communicate by telephone. TTY doesn't work with all PCS  
Phones. If you have a PCS TTY-capable phone, it may not function effectively, or at  
all, when attempting 911 calls due to the equipment or software of the answering  
agency. Therefore, a TTY device should not be relied on for 911 calls.  
Pay-Per-Call Service. We will not complete calls from your Number to 900, 976  
and similar numbers for pay-per-call services.  
International Calling. You may be limited in the international destinations that you  
can call with Services. You should contact PCS Customer Service Solutions for  
information about international destinations that you cannot call.  
Limitation of Liability. Except as otherwise provided in this section, our sole  
liability to you for any loss or damage arising out of providing or failing to provide  
Services (including mistakes, omissions, interruptions, delays, errors, or defects)  
does not exceed (1) in cases related to a specific piece of equipment, the prorated  
MRC for Services to the piece of equipment during the affected period, or (2) in  
cases not related to a specific piece of equipment, the prorated MRCs for Services  
to you during the affected period. Neither we nor our vendors, suppliers or  
licensors are liable for any damage arising out of or in connection with:  
a) any act or omission of any telecommunications service or other service  
provider other than us;  
b) any directory listing;  
c) any dropped calls or inability to place or receive calls;  
d) any interruption of Services, including interruptions caused by equipment or  
facilities failure or shortages, transmission limitations or system capacity limitations;  
e) traffic or other accidents, or any health-related claims allegedly arising from the use  
of Services, phones, equipment or accessories used in connection with the Services;  
f) the use of Wireless Web Services and PCS Vision applications and services,  
including the accuracy or reliability of any information obtained from the Internet  
using Wireless Web Services or from Voice Portal Services, PCS Vision wireless  
services or Internet services, content or applications not supported by Sprint PCS;  
g) any late or failed message delivery;  
h) any interruption or failure of 911 or E911 emergency services or identification  
of the Number, address or name associated with any person accessing or  
attempting to access emergency services from your phone;  
Section 4B: Terms & Conditions / Warranty  
216  
i) the installation or repair of any products or equipment by parties who are not  
our authorized employees or agents;  
j) events due to factors beyond our control, including acts of God (including,  
without limitation, weather-related phenomena, fire or earthquake), war, riot,  
strike, or orders of governmental authority;  
k) any act or omission of any third party or independent contractor that offers  
products or services in conjunction with or through the Services; or  
l) your negligent or intentional act or omission.  
NO CONSEQUENTIAL OR OTHER DAMAGES. UNDER NO CIRCUMSTANCES ARE  
WE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR SPECIAL  
DAMAGES OF ANY NATURE WHATSOEVER ARISING OUT OF OR IN  
CONNECTION WITH PROVIDING OR FAILING TO PROVIDE SERVICES, PHONES  
OR OTHER EQUIPMENT USED IN CONNECTION WITH THE SERVICES,  
INCLUDING, WITHOUT LIMITATION, LOST PROFITS, LOSS OF BUSINESS, OR  
COST OF REPLACEMENT PRODUCTS AND SERVICES. THIS SECTION SURVIVES  
TERMINATION OF THIS AGREEMENT.  
Indemnification. You indemnify and defend us, our partners, directors, officers,  
employees and agents from and against any claim, action, damage, liability and  
expense arising out of or in connection with: (1) your acts or omissions that occur  
in connection with your use of the Services or equipment used in connection  
with the Services, and (2) any communications you make or receive using the  
Services. This indemnification extends to and includes any attorney's fees and  
costs incurred by us arising from any actions or claims to which this  
indemnification applies, or from the contesting of the applicability of this  
provision. This section survives termination of this Agreement.  
MANDATORY ARBITRATION OF DISPUTES. ANY CLAIM, CONTROVERSY OR  
DISPUTE OF ANY KIND BETWEEN THE CUSTOMER AND THE COMPANY AND/OR  
ANY OF ITS EMPLOYEES, AGENTS, AFFILIATES OR OTHER REPRESENTATIVES,  
WHETHER SOUNDING IN CONTRACT, STATUTE, OR TORT, INCLUDING FRAUD,  
MISREPRESENTATION, FRAUDULENT INDUCEMENT, OR ANY OTHER LEGAL OR  
EQUITABLE THEORY AND REGARDLESS OF THE DATE OF ACCRUAL OF SUCH  
CLAIM, CONTROVERSY OR DISPUTE SHALL BE RESOLVED BY FINAL AND  
BINDING ARBITRATION AS PRESCRIBED IN THIS SECTION. THE FEDERAL  
ARBITRATION ACT, NOT STATE LAW, GOVERNS THE QUESTION OF WHETHER A  
CLAIM IS SUBJECT TO ARBITRATION. HOWEVER, NOTHING CONTAINED IN THIS  
ARBITRATION PROVISION SHALL PRECLUDE THE CUSTOMER FROM RESOLVING  
ANY CLAIM, CONTROVERSY OR DISPUTE IN SMALL CLAIMS COURT HE OR SHE  
OTHERWISE WOULD HAVE THE RIGHT TO PURSUE.  
A single arbitrator engaged in the practice of law will conduct the arbitration. The  
arbitrator will be selected according to the rules of CPR or, alternatively, may be  
selected by agreement of the parties, who shall cooperate in good faith to select the  
arbitrator. The arbitration will be conducted by, and under the then-applicable rules  
of the CPR Institute for Dispute Resolution. All expedited procedures prescribed by  
the applicable rules will apply. Any required hearing fees and costs shall be paid by  
Section 4B: Terms & Conditions / Warranty  
217  
the parties as required by the applicable rules or as required by applicable law, but  
the arbitrator shall have the power to apportion such costs as the arbitrator deems  
appropriate. The arbitrator's decision and award will be final and binding (subject to  
the appeal clause below), and judgment on the award rendered by the arbitrator  
may be entered in any court with jurisdiction.  
An appeal may be taken under the CPR Arbitration Appeal Procedure from any  
final award of any arbitral panel in any arbitration arising out of or related to this  
agreement that is conducted in accordance with the requirements of such Appeal  
Procedure. Unless otherwise agreed by the parties and the appeal tribunal, the  
appeal shall be conducted at the place of the original arbitration.  
If any party files a judicial or administrative action asserting a claim that is subject to  
arbitration and another party successfully stays such action or compels arbitration,  
the party filing that action must pay the other party's costs and expenses incurred in  
seeking such stay or compelling arbitration, including attorney's fees.  
Notices. You may get our current address for written notice by calling PCS  
Customer Service Solutions. Written notice to you is sent to your last known  
address in our invoicing records. Written notice is effective three days after  
deposit in the U.S. mail, postage prepaid, and properly addressed. Unless required  
by this Agreement or Applicable Laws, (1) you may notify us by calling PCS  
Customer Service Solutions, and (2) we may notify you by leaving a message for  
you on your PCS Phone, answering machine or with your answering service.  
Notice addresses may be changed by giving notice as provided in this section.  
Choice of Law; Jurisdiction. This Agreement is governed by and must be  
construed under federal law and the laws of the State of Kansas, without regard to  
choice of law principles.  
General. If either of us does not enforce any right or remedy available under this  
Agreement, that failure is not a waiver of the right or remedy for any other breach or  
failure by the other party. Our waiver of any requirement in any one instance is not a  
general waiver of that requirement and does not amend this Agreement. This  
Agreement is subject to any applicable federal and state law (collectively,  
“Applicable Laws”). If any part of this Agreement is held invalid or unenforceable,  
that part is interpreted consistent with Applicable Laws as nearly as possible to  
reflect the original intentions of the parties and the rest of this Agreement remains  
in full force and effect. Section headings are for descriptive purposes only and are  
not used to interpret this Agreement. You may not assign this Agreement to any  
other person or entity without our prior written approval. This Agreement  
(including any referenced documents and attachments) makes up the entire  
agreement between you and us and replaces all prior written or spoken agreements,  
representations, promises or understandings between you and us. The provisions of  
this Agreement that are contemplated to be enforceable after the termination of this  
Agreement survive termination of this Agreement. If there is a conflict, the Service  
Plan (including any Term Service Plan) controls over the Terms.  
Section 4B: Terms & Conditions / Warranty  
218  
Terms of Picture Mail Service  
The Picture Mail service (“Service”) – including access to and use of the services  
at www.picturemail.sprintpcs.com – is provided to you by Sprint under the following  
terms and conditions and incorporate the Terms and Conditions set forth at  
www.sprintpcs.com which include the Terms and Conditions of Service provided  
with your PCS Phone User’s Guide, terms regarding copyright and trademark  
matters, and other terms relating to the use of our services. Your use of the  
Service indicates your acceptance of all of these terms (collectively “Terms”).  
Sprint may change these Terms from time to time at our discretion with or  
without notice to you. Any changes will be posted on the Service.  
1. Eligibility  
The Service is provided to individuals who are at least 18 years old and to minors  
who have parental permission. We encourage parents and guardians to take an  
active role in protecting the privacy and security of their children. If you as a  
parent have any concerns regarding this issue, please feel free to contact us at  
2. Membership Fees  
Picture Mail is available at an additional monthly charge (in addition to any charges  
you may pay for PCS Vision services) through Sprint and provides you basic  
services, such as the ability to store and share pictures taken on select PCS Vision  
Picture Phones or devices. Additional features or services (beyond basic services)  
may also be available from time to time for an additional charge. If you have  
previously not signed up for the Service with activation of your  
PCS Service Plan, you may add this Service to your account for an additional  
monthly charge through a PCS Vision Picture Phone.  
3. Picture Mail Password  
We will have access to your Picture Mail Password and User Name.  
We may remind you of your password, at your request, by sending an email to the  
address you used when creating your account. We will not disclose your Picture  
Mail Password to third parties, but we may access your account if necessary to  
maintain the Service, to comply with lawful requests from governmental  
authorities, or in response to court orders, subpoenas, complaints.  
4. Photo Loss  
Sprint does not warrant that pictures or albums stored will not be deleted,  
modified or damaged. If pictures or images are particularly valuable, have  
sentimental or other intangible value or are otherwise unique or irreplaceable,  
reliable storage alternatives should be used, including hard copy duplication and  
electronic back up and storage.  
5. Use of Related Software  
Any software that is provided for download and installation on your personal  
computer or electronic device in connection with the Service is licensed under the  
terms and conditions of a separate software license agreement. These license  
agreements are available for your review upon download, installation and/or use of  
that software.  
Section 4B: Terms & Conditions / Warranty  
219  
6. Use of Picture Mail  
Solely for the purposes of displaying your pictures to selected persons and fulfilling  
your print orders, you grant us permission to use, download, upload, copy, print,  
display, reproduce, modify, publish, post, transmit and distribute any material  
included in your albums.  
7. Member Conduct  
(a) In consideration for use of the Service, you agree to provide true, accurate,  
current and complete information about you as prompted during the registration  
process, and to maintain and update this information to keep it true, accurate,  
current and complete.  
(b) You are responsible for maintaining the confidentiality of your Picture Mail  
Password and Account, and you agree to be fully responsible for all activities  
which occur through anyone's use of your Picture Mail Password or account,  
whether or not authorized by you. You agree to notify Sprint immediately of any  
unauthorized use of your password or account or any other breach of security.  
(c) You must provide at your own expense all equipment and software required to  
use the Service, including computer and photography equipment, application  
software, modems, and access to the Internet. We are not responsible for delays  
resulting from incompatibility of such equipment and software, or from improper  
configuration or maintenance of such equipment and software.  
(d) While we do not control the content of any member submissions to the Service  
and do not have any obligation to monitor such content, if we have any reason to  
believe that any language, content, graphics or other materials contained within  
your content is inappropriate, we may, in our sole discretion, refuse to process  
any print orders, remove your pictures from our servers, suspend your account,  
restrict access to it, remove content from it, or terminate it.  
(e) You agree (1) not to use the Service for illegal purposes; (2) not to interfere  
with or disrupt the Service or servers or networks or software or data connected  
to the Service; (3) to comply with all requirements, procedures, policies and  
regulations of networks connected to the Service; and (4) to comply with all  
applicable laws regarding the transmission of technical data exported from the  
United States. You agree to abide by all applicable local, state, national, and  
international laws and regulations in your use of the Service and in your use of any  
software downloaded from the Service, including, without limitation, copyright,  
trademark, obscenity and defamation laws.  
(f) You agree not to interfere with the use and enjoyment of the Service by other  
users of the Service. You agree not to attempt to gain unauthorized access to  
other computer systems or networks connected to the Service.  
(g) You agree not to transmit through the Service, or upload to it  
(1) any pictures or other content in violation of the copyrights, privacy rights or  
other rights of any other person; (2) any unlawful, harassing, libelous, privacy  
invading, abusive, hateful, threatening, harmful, vulgar, defamatory, obscene or  
otherwise objectionable material of any kind; (3) any material that violates the  
rights of another, including, but not limited to, the intellectual property rights of  
Section 4B: Terms & Conditions / Warranty  
220  
another; (4) any material that harms minors; (5) any material that violates any  
applicable local, state, national, or international law or regulation; or (6) “junk  
mail,” “spam,chain letters,or unsolicited mass distribution of email.  
8. Privacy Statement  
In order to register you as a member of the Service, we ask you to supply us with  
some basic information (email address, user selected Picture Mail Password,  
name) during the registration process and, occasionally, at other times while using  
the Service. All uses of your information will be in accordance with our privacy  
policy, as set forth in the following Privacy Policy. As this policy may be updated  
from time to time, a current version can be found at www.sprintpcs.com.  
PRIVACY POLICY  
(a) Sprint respects the privacy of its customers, and other individuals and  
businesses using the Websites owned and operated by Sprint and its Affiliates  
(“Sprint Websites”). This updated Privacy Policy effective October 22, 2001, is  
to keep you informed about the types of information collected on Sprint  
Websites and how the information is used and protected. The revised Privacy  
Policy includes information about advertisements on Sprint Websites and  
access to your account information.  
Sprint protects the privacy of its local, long distance and wireless customers consistent  
with the Federal Telecommunications Act and rules and regulations issued by the  
Federal Communications Commission.  
Sprint's Privacy Policy for its high speed Internet services can be accessed at:  
There are two types of information that may be exchanged between the Sprint site  
and the user during each visit to a Sprint site. They are:  
1. General technical data transmitted between your computer and the Sprint  
site that does not identify you personally.  
2. Personally identifiable information that you voluntarily share. The types of  
personally identifiable information that you might share include your name,  
address, phone number, email address and credit card number.  
(b) Anonymous Information  
In order to provide you with the information and services that you look for from  
the Sprint Websites, Sprint gathers certain types of information from you that are  
not personally identifiable. This is called anonymous information and includes:  
1. The type of Internet browser you use when you visit  
2. The types of computer operating system you use  
3. The search engine you use to access the Sprint Websites (such as “AOL.com,”  
“Yahoo.com” or “Go.com”)  
4. The specific Sprint Website that you visit (sprint.com, sprintpcs.com, etc.).  
The anonymous information collected is not associated with you personally or  
your business. Sprint uses this anonymous information in the aggregate to  
improve Sprint Websites and the services we provide through those sites.  
Section 4B: Terms & Conditions / Warranty  
221  
(c) Use Of Cookies  
Sprint Websites may use “cookies” to collect the anonymous information  
described in this Privacy Policy. Cookies are bits of encrypted data that are loaded  
by a Sprint server onto your computer or other device when you visit a Sprint  
Website. The server can retrieve the cookies the next time you visit a site and use  
them to identify the computer as a return visitor. Sprint uses cookies to collect  
non-personally identifiable information and generically track usage patterns on the  
Sprint Websites in order to monitor activity and administer the sites. Sprint also  
uses information obtained from cookies to improve Sprint Websites, and make  
decisions concerning advertising, product offerings and services. Most users can  
disable cookies from their Internet browsers, receive a warning before a cookie is  
placed on their computer, and erase all cookies from their computer hard drives  
by following the instructions provided by the browser.  
(d) Advertisements On Sprint Websites  
Advertising companies deliver ads on some Sprint Websites. You should be aware  
that when you click on these ads, the advertising companies may also deploy  
cookies to receive anonymous information about ad viewing by Internet users on  
Sprint Websites and other Websites. This information is associated with your Web  
browser, but cannot be associated with your name or email address without your  
permission. Therefore, advertising companies may know where your computer  
goes on the Web, but they do not know who you are unless you tell them. Sprint  
does not provide personally identifiable information about its customers or Sprint  
Website visitors to these advertising companies.  
(e) Personally Identifiable Information  
Sprint may ask you to provide what is often referred to as “personally identifiable  
information” such as your name, address, telephone number and email address  
when you use Sprint Websites to: purchase a service or product online, enter a  
contest or sweepstakes, ask to receive information, respond to a survey, register  
with a Sprint Website, access your account, ask for a personalized service, request  
customer service online, or apply for a job. You always have the alternative of  
mailing or calling Sprint with the information requested if you do not wish to  
provide it online. Personally identifiable information provided at a Sprint Website  
to order Sprint services other than Internet services will be protected in the same  
manner as when the information is provided by other means such as over the  
telephone or by mail. We protect customer information obtained from the local,  
long distance and wireless service customers of Sprint consistent with federal  
laws governing telecommunications services and with regulations issued by the  
Federal Communications Commission. Sprint's Privacy Policy for its Internet  
services can be accessed at: www.sprint.com/privacypolicy/broadbandservices.  
Section 4B: Terms & Conditions / Warranty  
222  
We use personally identifiable information provided at a Sprint Website in the  
following ways unless otherwise specified:  
1. For its intended purpose (such as to complete an online order  
for service).  
2. To provide you with information about new PCS Products and Services or  
products and services offered in conjunction with Sprint business partners.  
(f) Disclosure To Third Parties  
Sprint will not sell or disclose to outside parties any personally identifiable  
information obtained from a Sprint online service or the registration at a Sprint  
Website without your consent except under the following circumstances:  
1. When required by law,  
2. When disclosure is necessary to protect the safety of a customer, third party  
or Sprint's property,  
3. If it is required in connection with any sale or transfer of all or a portion of  
Sprint's assets.  
When Sprint uses agents, contractors or other companies to perform services on  
its behalf, Sprint will require that they protect your personally identifiable  
information consistent with this Privacy Policy. Sprint may share the anonymous  
information described in this Privacy Policy with third parties from time-to-time.  
(g) Email Communications  
Email is an increasingly popular communication tool through which you and your  
business may communicate with Sprint. Likewise, Sprint may use email to  
communicate with you, respond to your email, and to tell you about new  
products and services. If you do not wish to receive email promotions and new  
products and service announcements from Sprint, please follow the instructions  
that appear at the end of the email communication that you receive from Sprint to  
have your name removed from the list.  
(h) Security  
Sprint utilizes several encryption methods to ensure that the data you submit on  
any of the Sprint Websites is secure. Through this “secure session,” information  
that you input into a Sprint online order form will be sent and will arrive privately  
and unaltered at a Sprint server. This security prohibits access to your information  
by other companies and Web users.  
(i) Children  
Sprint does not intend to collect personally identifiable information from  
individuals under 18 years of age. If Sprint becomes aware that a user who is  
under 18 is using a Sprint Website, Sprint will specifically instruct that individual  
that they are not to submit information on Sprint Websites without a parent or  
guardian's consent. If a child has provided Sprint with personally identifiable  
information without the knowledge of Sprint, a parent or guardian of the child  
may contact Sprint at [email protected] and Sprint will delete the child's  
information from our existing files.  
Section 4B: Terms & Conditions / Warranty  
223  
(j) Links  
Some Sprint Websites contain links to other Websites that are owned and operated  
by parties other than Sprint. Please be aware that this Privacy Policy does not  
extend to any Websites other than those owned and controlled by Sprint.  
(k) Account Information  
You may always contact us at [email protected] or by telephone or mail to  
verify your name, address, email address, telephone number and/or billing  
information. Sprint will correct any information that is inaccurate.  
(l) Questions  
If you have questions or comments regarding this Privacy Policy, you may contact  
us at [email protected]. If you have submitted personally identifiable  
information, and would like that information deleted from our records, please  
contact us at our email address, [email protected]. We will use reasonable  
efforts to delete that information from our files.  
(m) Updates  
Sprint may amend this Privacy Policy from time-to- time. These changes will be  
posted online.  
9. Usage and Storage  
We and our suppliers assume no responsibility for: (1) any full or partial loss,  
deletion or failure to store your pictures or any other data; (2) any notice or lack of  
notice of such loss, deletion or failure to store your data; or (3) any correct or  
erroneous informing of or failure to inform user of such loss, deletion or failure to  
store your data. From time to time we may establish an upper limit on the size of  
data storage that you are permitted to use on the Service and/or an upper limit on  
the frequency or amount of usage that you are permitted on the Service or related  
software. We may establish a reasonable period of time (for example, three  
months) such that if you do not use the Service at least once during such period,  
we may terminate the Service to you for non-use, and delete pictures and other  
data that you may have stored through the Service.  
10. No Resale of Service or Software  
Your membership account is intended only for personal, noncommercial use. You  
agree not to reproduce, duplicate, copy, sell, resell or exploit for any commercial  
purposes, any portion of the Service, use of the Service, access to the Service, or  
related software.  
11. Proprietary Rights  
You agree that content, including but not limited to software, text, pictures,  
graphics, video, music, sound, or other materials or information, contained in the  
Service or contained in sponsor advertisements or presented to you through the  
Service or advertisers is protected by copyrights, trademarks, service marks,  
patents, or other proprietary rights, laws, and/or treaties. You agree that you are  
permitted to use such materials and information only as expressly authorized by  
us or the true owner of the right in question and you may not copy, reproduce,  
transmit, distribute, or create derivative works of such materials or information  
without proper express, written authorization from us or the true owner of the  
right in question.  
Section 4B: Terms & Conditions / Warranty  
224  
12. Changes to the Service and Termination of the Service  
(a) We may change these Terms from time to time without notice to you. Should  
you object to any of these Terms or any changes to them, or should you become  
dissatisfied with the Service in any way, your only recourse is to immediately: (1)  
discontinue use of the Service; and (2) terminate the Service and notify us of the  
termination. Termination of the Service may, in some instances, require you to  
change your PCS Service Plan.  
(b) We may discontinue the Service or any feature or portion of the Service at any  
time, with or without notice. You agree that upon modification or discontinuance  
of the Service, we may delete the data you have stored on the Service.  
(c) You agree that we may terminate your membership in the Service and delete  
any and all information, posting, communications, albums and pictures at any  
time, without notice, if we believe: (1) that you have failed to use the Service at  
least once during a reasonable span of time as determined by us; (2) that you have  
violated or acted inconsistently with the letter or spirit of these Terms; (3) that  
you have violated our rights or the rights of other users or parties; or (4) that you  
have abused or misused the Service in any way, including but not limited to  
exceeding any limits that we may place on the amount of data that any individual  
may store on the Service.  
(d) We reserve the right at all times to disclose any information posted by you or any  
other user as necessary to satisfy any law, regulation or governmental request, or to  
edit, remove, or refuse to post any information or materials, in whole or in part, that  
in our sole discretion are objectionable or in violation of these terms and conditions.  
(e) Except as otherwise set forth in this provision, in the event your Service is  
terminated we will make reasonable efforts to provide 30 days prior notice before  
may delete any data from the Service.  
13. Disclaimers  
(a) We hereby disclaim any and all responsibility or liability for the accuracy,  
content, completeness, legality, reliability, operability or availability of information  
or material in this Service. We further disclaim any responsibility for the deletion,  
misdelivery, failure to store or untimely delivery of any information or material. We  
disclaim any responsibility for any harm resulting from downloading or accessing  
any information or material through the Service. You agree that you, the member,  
will bear all risk associated with any content that you access.  
(b) All processing of film, prints, slides, negatives or digital images is subject to our  
Terms. You agree that your sole remedy for any damage or loss of any materials  
that you submit to us for processing, printing, storage, transmission or other  
handling, even if caused by negligence or other fault, will only entitle you to  
replacement with a like amount of unexposed film and processing. EXCEPT FOR  
THE EXCLUSIVE REMEDY OF REPLACEMENT, THE HANDLING OF ANY FILM,  
PRINT, SLIDE, NEGATIVE OR DIGITAL IMAGE IS WITHOUT WARRANTY OR  
LIABILITY AND RECOVERY FOR ANY INCIDENTAL OR CONSEQUENTIAL  
DAMAGES IS EXCLUDED.  
Section 4B: Terms & Conditions / Warranty  
225  
(c) THIS SITE AND ALL PRODUCTS, SERVICES AND CONTENT PROVIDED  
THROUGH IT ARE PROVIDED “AS IS” AND “AS AVAILABLE' AND WITH NO  
WARRANTIES WHATSOEVER. TO THE FULLEST EXTENT PERMITTED BY  
APPLICABLE LAW, WE EXPRESSLY DISCLAIM ALL WARRANTIES OF ANY KIND,  
WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED  
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE,  
TITLE AND NON-INFRINGEMENT. WE DISCLAIM ANY WARRANTIES FOR THE  
SECURITY, RELIABILITY, TIMELINESS, AND PERFORMANCE OF THIS SERVICE,  
OR THAT THIS SITE OR OUR SERVER IS FREE OF VIRUSES OR OTHER HARMFUL  
COMPONENTS. WE DISCLAIM, TO THE FULLEST EXTENT PERMITTED BY LAW,  
ANY WARRANTIES FOR OTHER SERVICES OR GOODS RECEIVED THROUGH OR  
ADVERTISED ON THIS SERVICE OR RECEIVED THROUGH ANY LINKS  
PROVIDED IN THE SERVICE, AS WELL AS FOR ANY INFORMATION OR ADVICE  
RECEIVED THROUGH THE SERVICE OR THROUGH ANY LINKS PROVIDED IN  
THE SERVICE.  
(d) YOU EXPRESSLY AGREE THAT, TO THE MAXIMUM EXTENT PERMITTED BY  
APPLICABLE LAW, UNDER NO CIRCUMSTANCES SHALL SPRINT BE LIABLE TO  
ANY USER ON ACCOUNT OF THAT USER'S USE OR MISUSE OF AND RELIANCE  
ON THE SITE OR ITS ASSOCIATED PRODUCTS AND SERVICES. SUCH  
LIMITATION OF LIABILITY SHALL APPLY TO PREVENT RECOVERY OF DIRECT,  
INDIRECT, INCIDENTAL, CONSEQUENTIAL, SPECIAL, EXEMPLARY, AND  
PUNITIVE DAMAGES (EVEN IF WE HAVE BEEN ADVISED OF THE POSSIBILITY OF  
SUCH DAMAGES). SUCH LIMITATION OF LIABILITY SHALL APPLY WHETHER THE  
DAMAGES ARISE FROM USE OR MISUSE OF AND RELIANCE ON THE SITE,  
PRODUCTS OR SERVICES, FROM INABILITY TO USE THE SITE OR FROM THE  
INTERRUPTION, SUSPENSION, OR TERMINATION OF THE SITE OR DAMAGES  
INCURRED BY REASON OF OTHER SERVICES OR GOODS RECEIVED THROUGH  
OR ADVERTISED ON THIS SERVICE OR RECEIVED THROUGH ANY LINKS  
PROVIDED ON THIS SITE, AS WELL AS BY REASON OF ANY INFORMATION OR  
ADVICE RECEIVED THROUGH OR ADVERTISED ON THE SERVICES OR RECEIVED  
THROUGH ANY LINKS PROVIDED IN THE PRODUCTS AND SERVICES.  
(e) BECAUSE SOME JURISDICTIONS PROHIBIT THE EXCLUSION OF CERTAIN  
WARRANTIES OR THE EXCLUSION OR LIMITATION OF LIABILITY FOR  
CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY  
NOT APPLY TO YOU. OUR OWN AND OUR SUPPLIERS' TOTAL LIABILITY FOR  
DAMAGES, LOSSES, AND CAUSES OF ACTION, REGARDLESS OF LEGAL THEORY,  
WILL IN NO EVENT EXCEED THE AGGREGATE DOLLAR AMOUNT YOU HAVE  
PAID TO US UNDER THESE TERMS, OR US $25.00, WHICHEVER IS GREATER.  
14. Indemnity  
You agree to indemnify and hold Sprint and its parents, suppliers, licensors,  
subsidiaries, affiliates, officers, and employees harmless from any claim or  
demand, including reasonable attorneys' fees, made by any third party due to or  
arising out of: (1) use of the Service by you or by anyone using your account; (2)  
violation of these Terms by you or by anyone using your account; or (3) violation  
or infringement by you, or by anyone using your account, of intellectual property  
rights or any other rights of any other person.  
Section 4B: Terms & Conditions / Warranty  
226  
15. General Provisions  
We may assign our rights and duties under these Terms to any third party at any  
time without notice to you. These Terms and the relationship between you and  
Sprint shall be governed by the laws of the State of California without regard to its  
conflict of law provisions. You and Sprint agree to submit to the personal and  
exclusive jurisdiction of the courts located within the State of California. You  
agree that regardless of any statute or law to the contrary, any claim or cause of  
action arising out of or related to use of the Service must be filed within one (1)  
year after such claim or cause of action arose or be forever barred. The failure of  
Sprint to exercise or enforce any right or provision of these Terms shall not  
constitute a waiver of such right or provision.  
If any provision of these Terms is found by a court of competent jurisdiction to be  
invalid, the parties nevertheless agree that the court should endeavor to give  
effect to the parties' intentions as reflected in the provision, and that the other  
provisions of the Terms shall be valid and remain in full force and effect.  
Section 4B: Terms & Conditions / Warranty  
227  
Manufacturer’s Warranty  
Nokia One-Year Limited Warranty  
Nokia Inc. (“Nokia”) warrants that this cellular phone (“Product”) is free from  
defects in material and workmanship that result in Product failure during normal  
usage, according to the following terms and conditions:  
1
The limited warranty for the Product extends for ONE (1) year beginning on the  
date of the purchase of the Product. This one year period is extended by each  
whole day that the Product is out of your possession for repair under this warranty.  
2
The limited warranty extends only to the original purchaser (“Consumer”) of the  
Product and is not assignable or transferable  
to any subsequent purchaser/end-user.  
3
4
The limited warranty extends only to Consumers who purchase the Product in  
the United States of America.  
During the limited warranty period, Nokia will repair, or replace, at Nokia’s sole  
option, any defective parts, or any parts that will not properly operate for their  
intended use with new or refurbished replacement items if such repair or  
replacement is needed because of product malfunction or failure during  
normal usage. No charge will be made to the Consumer for any such parts.  
Nokia will also pay for the labor charges incurred by Nokia in repairing or  
replacing the defective parts. The limited warranty does not cover defects in  
appearance, cosmetic, decorative or structural items, including framing, and  
any non-operative parts. Nokia’s limit of liability under the limited warranty  
shall be the actual cash value of the Product at the time the Consumer returns  
the Product for repair, determined by the price paid by the Consumer for the  
Product less a reasonable amount for usage. Nokia shall not be liable for any  
other losses or damages. These remedies are the Consumer’s exclusive  
remedies for breach of warranty.  
5
6
Upon request from Nokia, the Consumer must prove the date of the original  
purchase of the Product by a dated bill of sale or dated itemized receipt.  
The Consumer shall bear the cost of shipping the Product to Nokia in  
Melbourne, Florida. Nokia shall bear the cost of shipping the Product back to  
the Consumer after the completion of service under this limited warranty.  
7
The Consumer shall have no coverage or benefits under this limited warranty  
if any of the following conditions are applicable:  
a) The Product has been subjected to abnormal use, abnormal conditions,  
improper storage, exposure to moisture or dampness, unauthorized  
modifications, unauthorized connections, unauthorized repair, misuse,  
neglect, abuse, accident, alteration, improper installation, or other acts  
which are not the fault of Nokia, including damage caused by shipping.  
b) The Product has been damaged from external causes such as collision  
with an object, or from fire, flooding, sand, dirt, windstorm, lightning,  
earthquake or damage from exposure to weather conditions, an Act of  
God, or battery leakage, theft, blown fuse, or improper use of any  
Section 4B: Terms & Conditions / Warranty  
228  
   
electrical source, damage caused by computer or internet viruses, bugs,  
worms, Trojan Horses, cancelbots or damage caused by the connection to  
other products not recommended for interconnection by Nokia.  
c) Nokia was not advised in writing by the Consumer of the alleged defect  
or malfunction of the Product within fourteen (14) days after the  
expiration of the applicable limited warranty period.  
d) The Product serial number plate or the accessory data code has been  
removed, defaced or altered.  
e) The defect or damage was caused by the defective function of the cellular  
system or by inadequate signal reception by the antenna, or viruses or  
other software problems introduced into the Product.  
8
Nokia does not warrant uninterrupted or error-free operation of the Product. If  
a problem develops during the limited warranty period, the Consumer shall take  
the following step-by-step procedure:  
a) The Consumer shall return the Product to the place of purchase for repair  
or replacement processing.  
b) If “a” is not convenient because of distance (more than 50 miles) or for other  
good cause, the Consumer shall ship the Product prepaid and insured to:  
Nokia Inc., Attn: Repair Department  
795 West Nasa Blvd.  
Melbourne, FL 32901  
c) The Consumer shall include a return address, daytime phone number  
and/or fax number, complete description of the problem, proof of  
purchase and service agreement (if applicable). Expenses related to  
removing the Product from an installation are not covered under this  
limited warranty.  
d) The Consumer will be billed for any parts or labor charges not covered by  
this limited warranty. The Consumer will be responsible for any expenses  
related to reinstallation of the Product.  
e) Nokia will repair the Product under the limited warranty within 30 days  
after receipt of the Product. If Nokia cannot perform repairs covered  
under this limited warranty within 30 days, or after a reasonable number  
of attempts to repair the same defect, Nokia at its option, will provide a  
replacement Product or refund the purchase price of the Product less a  
reasonable amount for usage. In some states the Consumer may have the  
right to a loaner if the repair of the Product takes more than ten (10) days.  
Please contact the Customer Service Center at Nokia at the telephone  
number listed at the end of this warranty if you need a loaner and the repair  
of the Product has taken or is estimated to take more than ten (10) days.  
f) If the Product is returned during the limited warranty period, but the  
problem with the Product is not covered under the terms and conditions  
of this limited warranty, the Consumer will be notified and given an  
estimate of the charges the Consumer must pay to have the Product  
repaired, with all shipping charges billed to the Consumer. If the estimate  
Section 4B: Terms & Conditions / Warranty  
229  
is refused, the Product will be returned freight collect. If the Product is  
returned after the expiration of the limited warranty period, Nokia’s  
normal service policies shall apply and the Consumer will be responsible  
for all shipping charges.  
9
You (the Consumer) understand that the product may consist of refurbished  
equipment that contains used components, some of which have been  
reprocessed. The used components comply with Product performance and  
reliability specifications.  
10 ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A  
PARTICULAR PURPOSE OR USE, SHALL BE LIMITED TO THE DURATION OF  
THE FOREGOING LIMITED WRITTEN WARRANTY. OTHERWISE, THE  
FOREGOING LIMITED WARRANTY IS THE CONSUMER’S SOLE AND  
EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS  
OR IMPLIED. NOKIA SHALL NOT BE LIABLE FOR SPECIAL, INCIDENTAL,  
PUNITIVE OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED  
TO LOSS OF ANTICIPATED BENEFITS OR PROFITS, LOSS OF SAVINGS OR  
REVENUE, LOSS OF DATA, PUNITIVE DAMAGES, LOSS OF USE OF THE  
PRODUCT OR ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF  
ANY SUBSTITUTE EQUIPMENT OR FACILITIES, DOWNTIME, THE CLAIMS OF  
ANY THIRD PARTIES, INCLUDING CUSTOMERS, AND INJURY TO PROPERTY,  
RESULTING FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING  
FROM BREACH OF THE WARRANTY, BREACH OF CONTRACT, NEGLIGENCE,  
STRICT TORT, OR ANY OTHER LEGAL OR EQUITABLE THEORY, EVEN IF  
NOKIA KNEW OF THE LIKELIHOOD OF SUCH DAMAGES. NOKIA SHALL  
NOT BE LIABLE FOR DELAY IN RENDERING SERVICE UNDER THE LIMITED  
WARRANTY, OR LOSS OF USE DURING THE PERIOD THAT THE PRODUCT IS  
BEING REPAIRED.  
11 Some states do not allow limitation of how long an implied warranty lasts, so  
the one year warranty limitation may not apply  
to you (the Consumer). Some states do not allow the exclusion  
or limitation of incidental and consequential damages, so certain  
of the above limitations or exclusions may not apply to you (the Consumer).  
This limited warranty gives the Consumer specific legal rights and the  
Consumer may also have other rights which vary from state to state.  
12 Nokia neither assumes nor authorizes any authorized service center or any  
other person or entity to assume for it any other obligation or liability beyond  
that which is expressly provided for in this limited warranty including the  
provider or seller of any extended warranty or service agreement.  
13 This is the entire warranty between Nokia and the Consumer,  
and supersedes all prior and contemporaneous agreements or understandings,  
oral or written, relating to the Product, and  
no representation, promise or condition not contained herein shall modify  
these terms.  
14 This limited warranty allocates the risk of failure of the Product between the  
Consumer and Nokia. The allocation is recognized by the Consumer and is  
reflected in the purchase price.  
15 Any action or lawsuit for breach of warranty must be commenced within  
Section 4B: Terms & Conditions / Warranty  
230  
eighteen (18) months following purchase of the Product.  
16 Questions concerning this limited warranty may be directed to:  
Nokia Inc.  
Attn: Customer Service  
7725 Woodland Center Blvd., Ste. 150  
Tampa, FL 33614  
Telephone: 1-888-NOKIA-2U (1-888-665-4228)  
Facsimile: (813) 287-6612  
TTY/TDD Users Only: 1-800-24-NOKIA (1-800-246-6542)  
17 The limited warranty period for Nokia supplied attachments  
and accessories is specifically defined within their own  
warranty cards and packaging.  
Copyright © 2004 Sprint Spectrum L.P. All rights reserved. No reproduction in whole or in part without prior  
written approval. Sprint, the diamond logo design, and all other Sprint marks referenced herein are trademarks  
of Sprint Communications Company L.P. Nokia and Pop-Port are trademarks of Nokia Corporation. All other  
trademarks are property of their respective owners.  
Section 4B: Terms & Conditions / Warranty  
231  
call guard 60  
call logs  
erasing 76  
making a call from 75  
call restrictions 50  
calling cards 126  
calls  
answering 24  
calorie counter 96  
camera  
online albums 111  
sharing Picture Mail 108  
taking pictures 103  
charger,desktop 20  
Consumer Information on  
contacts  
adding an entry 78  
assigning a ringer 83  
calling a number from 27  
Index  
A
adding a phone number 81  
alarm  
calendar event 86  
voice memo 91  
alert notification  
calendar event 86  
call waiting 137  
changing service areas 38  
auto-answer mode 46  
B
battery  
charging 19  
installing 18  
bookmarks  
browser  
ending a connection 142  
C
editing entries 81  
finding entries 79  
calendar 86  
Index  
232  
 
editing entries 81  
erasing 52  
O
finding entries 79  
sharing 108  
Picture Mail Web Site 112  
profile  
one-touch dialing  
P
passwords for PCS accounts 5  
PCS Services  
call waiting 137  
Operator Services 7  
PCS Vision  
FAQs 175  
R
using voice commands 119  
restoring factory settings 52  
ringer types  
ringer volume 37  
ringers  
Picture Mail 147  
ringers 165  
screen savers 167  
security features 53  
phone book  
adding a phone number 81  
assigning a ringer to a contact  
analog networks 57  
call guard 60  
other digital networks 56  
S
safety 182  
calling a number from 27  
Index  
234  

Seagate DB35 SERIES 72002 ST3400833ACE User Manual
Samsung SGH N620E User Manual
Samsung SGH A887 User Manual
Samsung SGH A200 User Manual
Samsung Galaxy S4 GH68 38773F User Manual
Philips HD8944 User Manual
Philips FR 985 User Manual
Philips CD 850 User Manual
Oster Coffeemaker PSTX Series User Manual
Olympus CAMEDIA MAUSB 1 User Manual