Nokia N6060v User Manual

Nokia N6060v User’s Guide

Under no circumstances shall Nokia be responsible for any loss of data or income or any

special, incidental, consequential or indirect damages howsoever caused.

The contents of this document are provided "as is". Except as required by applicable law, no

warranties of any kind, either express or implied, including, but not limited to, the implied

warranties of merchantability and fitness for a particular purpose, are made in relation to the

accuracy, reliability or contents of this document. Nokia reserves the right to revise this

document or withdraw it at any time without prior notice.

The availability of particular products may vary by region. Please check with the Nokia dealer

nearest to you.

This device may contain commodities, technology or software subject to export laws and

regulations from the US and other countries. Diversion contrary to law is prohibited.

Contents

For your safety........................ vii 2. Y o ur phone............................ 5

Keys a nd parts................................ 5

General information ................ xi

Standby mode................................. 7

Overview of functions................. xi

Display................................................... 7

Access codes.................................. xi

Personal shortcut list ........................ 7

Security code...................................... xi

Shortcuts in the standby mode...... 8

PIN codes............................................. xi

Power saving........................................ 8

PUK codes........................................... xii

Indicators.............................................. 9

Barring password.............................. xii

Keypad lock (keyguard).............. 10

Configuration settings

3. Call functions...................... 11

Make a call.................................... 11

Speed dialing.................................... 11

Answer or reject a call............... 12

Call waiting....................................... 12

Options during a call.................. 13

service............................................. xii

Download content and

applications.................................. xiii

Nokia support and contact

information.................................. xiv

1. Get started........................... 1

Open the fold.................................. 1

Install the SIM card and

battery.............................................. 1

Charge the battery........................ 3

Switch the phone on and off..... 3

Plug and play service ........................ 4

Normal operating position.......... 4

4. Write text............................ 14

Settings .......................................... 14

Predictive text input................... 15

Write compound words ................. 15

Traditional text input ................. 15

5. Navigate the menus............ 17

iii

6. Messages............................ 18 7. C a ll register........................ 35

Text messages (SMS).................. 18 Recent calls lists.......................... 35

Write and send a message............ 19

Read and reply to a message....... 20

Templates........................................... 21

Multimedia messages (MMS).. 21

Write and send a message............ 22

Read and reply to a message....... 23

Memory full.................................. 24

C o unters and timers................... 35

8. C o ntacts ............................. 36

Search for a contac t ................... 36

S a v e names and phone

number s ......................................... 36

Save numbers, items, or

Folders............................................ 25

an image........................................ 36

Copy contacts............................... 38

Edit contact details .................... 38

Delete contacts or contact

details............................................. 38

Business cards.............................. 39

My presence.................................. 39

Subscribed names ....................... 40

Add contacts to subscribed names 41

View subscribed names.................. 41

Unsubscribe a contact.................... 42

Settings.......................................... 42

Groups............................................ 42

Speed dials.................................... 42

Info, service, and my

Flash messages ............................ 26

Write a flash message.................... 26

Receive a flash message................ 26

E-mail application ...................... 27

Write and send an e-mail............. 27

Download e-mail............................. 28

Read and reply to e-mail............... 28

Inbox and other folders ................. 29

Delete e-mail messages................. 29

Voice messages............................ 29

Info messages............................... 30

Service commands...................... 30

Delete messages.......................... 30

Message settings......................... 31

Text and SMS e-mail...................... 31

Multimedia........................................ 31

E-mail ................................................. 33

Other settings................................... 34

Message counter......................... 34

numbers......................................... 43

9. Settings.............................. 44 S t opwatch ..................................... 59

Profiles............................................ 44 C o untdown timer ........................ 60

Themes............................................ 44

12. A p plications..................... 62

Tones............................................... 45

Game s ............................................. 62

Lights ............................................. 45

L a unch a gam e ................................. 62

My shortcuts................................. 45

Display............................................ 46

Time and date............................... 47

Call................................................... 47

Phone.............................................. 49

Connectivity.................................. 50

Enhancements.............................. 50

Configuration ............................... 51

Security .......................................... 53

Restore factory settings ............ 54

Game downloads............................. 62

Game settings................................... 62

Collection....................................... 63

Launch an application.................... 63

Other application options............. 63

Download an application.............. 64

13. Web .................................. 65

Set up browsing........................... 65

Connect to a service................... 65

Browse pages................................ 66

Browse with phone keys................ 67

Options while browsing................. 67

Direct calling .................................... 67

Appearance settings................... 68

Cookies ........................................... 69

Scripts over secure connection 69

Bookmarks..................................... 69

Receive a bookmark........................ 70

Download files.............................. 70

Service inbox................................. 71

Service inbox settings.................... 71

10. Gallery.............................. 55

11. Organizer ......................... 56

Alarm clock ................................... 56

Stop the alarm .................................. 56

Calendar......................................... 57

Make a calendar note..................... 57

Note alarm ......................................... 57

To-do list........................................ 58

Notes............................................... 58

Calculator...................................... 59

Cache memory............................. 72

Positioning information ............ 72

Browser security.......................... 73

Security module............................... 73

Certificates........................................ 74

Digital signature.............................. 75

14. SIM services..................... 77

15. Battery information ........ 78

Charging and discharging......... 78

Nokia battery authentication

guidelines...................................... 79

16. Genuine Enhancements .. 82

Power.............................................. 82

Standard Charger (ACP-7) ............ 83

Travel Charger (ACP-12)................ 83

Audio ...................................................... 84

Nokia Headset HDC-5.................... 84

Care and maintenance........... 85

Additional safety

information ............................ 87

Index....................................... 93

For your safety

Read these simple guidelines. Not following them may be dangerous or illegal.

Read the complete user guide for further information.

SWITCH ON SAFELY

Do not switch the phone on when wireless phone use is prohibited or

when it may cause interference or danger.

ROAD SAFETY COMES FIRST

Obey all local laws. Always keep your hands free to operate the vehicle

while driving. Your first consideration while driving should be road

safety.

INTERFERENCE

All wireless phones may be susceptible to interference, which could

affect performance.

SWITCH OFF IN HOSPITALS

Follow any restrictions. Switch the phone off near medical equipment.

SWITCH OFF IN AIRCRAFT

Follow any restrictions. Wireless devices can cause interference in

aircraft.

SWITCH OFF WHEN REFUELING

Do not use the phone at a refueling point. Do not use near fuel or

chemicals.

SWITCH OFF NEAR BLASTING

Follow any restrictions. Do not use the phone where blasting is in

progress.

vii

USE SENSIBLY

Use only in the normal position as explained in the product

documentation. Do not touch the antenna unnecessarily.

QUALIFIED SERVICE

Only qualified personnel may install or repair this product.

ENHANCEMENTS AND BATTERIES

Use only approved enhancements and batteries. Do not connect

incompatible products.

WATER-RESISTANCE

Your phone is not water-resistant. Keep it dry.

BACK-UP COPIES

Remember to make back-up copies or keep a written record of all

important information stored in your phone.

CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user guide for detailed

safety instructions. Do not connect incompatible products.

EMERGENCY CALLS

Ensure the phone is switched on and in service. Press the end key as

many times as needed to clear the display and return to the start screen.

Enter the emergency number, then press the call key. Give your location.

Do not end the call until given permission to do so.

■ About your device

The wireless device described in this guide is approved for use on the GSM 900/

1800 networks. Contact your service provider for more information about

networks.

viii

When using the features in this device, obey all laws and respect the privacy and

legitimate rights of others.

Warning: To use any features in this device, other than the alarm clock,

the device must be switched on. Do not switch the device on when

wireless device use may cause interference or danger.

■ Network services

To use the phone you must have service from a wireless service provider. Many of

the features in this device depend on features in the wireless network to function.

These network services may not be available on all networks or you may have to

make specific arrangements with your service provider before you can utilize

network services. Your service provider may need to give you additional

instructions for their use and explain what charges will apply. Some networks may

have limitations that affect how you can use network services. For instance, some

networks may not support all language-dependent characters and services.

Your service provider may have requested that certain features be disabled or not

activated in your device. If so, they will not appear on your device menu. Your

device may also have been specially configured. This configuration may include

changes in menu names, menu order and icons. Contact your service provider for

more information.

This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP

protocols. Some features of this device, such as text messages, multimedia

messages, e-mail, presence enhanced contacts, mobile Internet services, and

content and application download, require network support for these technologies.

■ Shared memory

The following features in this device may share memory: gallery, contacts, text

messages, multimedia messages, instant messages, e-mail, calendar, to-do notes,

Java^TMgames and applications, and note application. Use of one or more of these

features may reduce the memory available for the remaining features sharing

memory. For example, saving many Java applications may use all of the available

memory. Your device may display a message that the memory is full when you try

to use a shared memory feature. In this case, delete some of the information or

entries stored in the shared memory features before continuing. Some of the

features, such as text messages, may have a certain amount of memory specially

allotted to them in addition to the memory shared with other features.

■ Enhancements

A few practical rules about accessories and enhancements are as follows:

•

Keep all accessories and enhancements out of the reach of small children.

When you disconnect the power cord of any accessory or enhancement, grasp

and pull the plug, not the cord.

•

Check regularly that enhancements installed in a vehicle are mounted and are

operating properly.

Installation of any complex car enhancements must be made by qualified

personnel only.

General information

■ Overview of functions

Your phone provides many functions that are practical for daily use, such

as a calendar, clock, and alarm clock. Your phone also supports the

following functions:

•

Extensible hypertext markup language (XHTML) (See “Web”, p. 65.)

E-mail application (See “E-mail application”, p. 27.)

Presence-enhanced contacts (See “My presence”, p. 39.)

Java 2 Platform, Micro Edition (J2ME ) (See “Applications”, p. 62.)

■ Access codes

Security code

The security code (5 to 10 digits) helps to protect your phone against

unauthorized use. The preset code is 12345. To change the code and set

the phone to request the code, see “Security”, p. 53.

PIN codes

The personal identification number (PIN) code and the universal personal

identification number (UPIN) code (4 to 8 digits) help to protect your SIM

card against unauthorized use. See “Security”, p. 53.

The PIN2 code (4 to 8 digits) may be supplied with the SIM card and is

required for some functions.

The module PIN is required to access the information in the security

module. See “Security module”, p. 73.

The signing PIN is required for the digital signature. See “Digital

signature”, p. 75.

PUK codes

The personal unblocking key (PUK) code and the universal personal

unblocking key (UPUK) code (8 digits) are required to change a blocked

PIN code and UPIN code, respectively. The PUK2 code (8 digits) is required

to change a blocked PIN2 code. If the codes are not supplied with the SIM

card, contact your local service provider for the codes.

Barring password

The barring password (4 digits) is required when using the Call barring

service. See “Security”, p. 53.

■ Configuration settings service

To use some of the network services, such as mobile Internet services and

MMS, your phone needs the correct configuration settings. You may be

able to receive the settings directly as a configuration message. After

receiving the settings you need to save them on your phone. The service

provider may provide a PIN that is needed to save the settings. For more

information on availability, contact your network operator, service

xii

provider, nearest authorized Nokia dealer, or visit the support area on the

Nokia Web site at www.nokia -asia.com/support.

When you have received a configuration message Configuration sett.

received is displayed.

To save the settings, select Show > Save. If the phone requests Enter

settings' PIN:, enter the PIN code for the settings, and select OK. To

receive the PIN code, contact the service provider that supplies the

settings. If no settings are saved yet, these settings are saved and set as

default configuration settings. Otherwise, the phone asks Activate saved

configuration settings?.

To discard the received settings, select Exit or Show > Discard.

To edit the settings, see “Configuration”, p. 51.

■ Download content and applications

You may be able to download new content (for example, themes) to the

phone (network service). Select the download function (for example, in

the Gallery menu). To access the download function, see the respective

menu descriptions. For the availability of different services, pricing, and

tariffs, contact your service provider.

Important: Use only services that you trust and that offer

adequate security and protection against harmful software.

xiii

■ Nokia support and contact information

For the latest version of this guide, downloads, services and additional

information related to your Nokia product, please visit

www.nokia -asia.com/support or your local Nokia web site. You may also

download free configuration settings such as MMS, GPRS, e-mail, and

other services for your phone model at

www.nokia -asia.com/phonesettings.

Should you still require assistance, please refer to

www.nokia -asia.com/contactus.

To check for the nearest Nokia care center location for maintenance

services, you may like to visit www.nokia -asia.com/repair.

xiv

G e t s t a r t e d

1. Get started

■ Open the fold

When you open the fold of the phone, it

opens up to approximately 154 degrees.

Do not try to force the fold open more.

■ Install the SIM card and battery

Always switch the device off and disconnect the charger before removing

the battery.

Keep all SIM cards out of the reach of small children. For availability and

information on using SIM card services, contact your SIM card vendor.

This may be the service provider, network operator, or other vendor.

This device is intended for use with the BL-5B battery.

The SIM card and its contacts can easily be damaged by scratches or

bending, so be careful when handling, inserting, or removing the card.

G e t s t a r t e d

To remove the back cover of the phone, slide

the back cover to remove it from the phone

(1).

Remove the battery

as shown (2). Release

the SIM card holder

(3).

Insert the SIM card

(4). Make sure that the SIM card is properly

inserted, and that the golden contact area on

the card is facing downwards. Close the SIM

card holder (5), and press it until it snaps into

position.

Replace the battery

(6). Observe the

battery contacts.

Always use original

Nokia batteries. See

“Nokia battery

authentication guidelines”, p. 79.

Slide the back cover into its place (7).

G e t s t a r t e d

■ Charge the battery

Warning: Use only batteries, chargers, and enhancements

approved by Nokia for use with this particular model. The use of

any other types may invalidate any approval or warranty, and

may be dangerous.

Check the model number of any charger before use with this device. This

device is intended for use when supplied with power from the ACP-7 or

ACP-12 charger provided with your phone.

For availability of approved enhancements, please check with your dealer.

When you disconnect the power cord of any enhancement, grasp and pull

the plug, not the cord.

1. Connect the charger to an ac wall socket.

2. Connect the lead from the charger to

the socket on the bottom of your

phone.

The charging time depends on the

charger and the battery used.

If the battery is completely discharged,

it may take a few minutes before the charging indicator appears on the

display or before any calls can be made.

■ Switch the phone on and off

Warning: Do not switch the phone on when wireless phone use is

prohibited or when it may cause interference or danger.

G e t s t a r t e d

Press and hold the end key.

If the phone asks for a PIN or a UPIN code, enter the code (displayed as

****), and select OK.

Plug and play service

When you switch on your phone for the first time, and the phone is in the

standby mode, you are asked to get the configuration settings from your

service provider (network service). Confirm or decline the query. See

Connect to service provider support in “Configuration”, p. 51 and

“Configuration settings service”, p. xii.

■ Normal operating position

Use the phone only in its normal operating position.

Your device has an external antenna.

Note: As with any other radio

transmitting device, do not touch the

antenna unnecessarily when the device

is switched on. Contact with the

antenna affects call quality and may

cause the device to operate at a higher

power level than otherwise needed.

Avoiding contact with the antenna area when operating the

device optimizes the antenna performance and the battery life.

Yo u r p h o n e

2. Your phone

■ Keys and parts

•

Earpiece (1)

Display (2)

Left selection key (3)

Middle selection key (4)

Right selection key (5)

The function of these keys depends on

the guiding text shown on the display

above the keys.

•

4-way navigation key (6)

Scroll up, down, left, and right.

Call key (7)

•

End key and power key (8)

Charger connector (9)

Headset connector (10)

Microphone (11)

Eyelet for a wrist strap (12)

Yo u r p h o n e

•

Loudspeaker (13)

Pulsating light (14)

When the fold is closed, the pulsating light

notifies you of the phone status (for example,

an incoming call) if Light effects is set On. See

“Lights”, p. 45.

Note: Avoid touching the connector as it is

intended for use by authorized service people

only.

Warning: Certain parts of this device may contain nickel. Avoid

prolonged contact with the skin. Continuous exposure to nickel

on the skin may lead to nickel allergy.

Yo u r p h o n e

■ Standby mode

When the phone is ready for use, and you have not entered any

characters, the phone is in the standby mode.

Display

•

Name of the network or the operator

logo (1).

•

Signal strength of the cellular network at

your current location (2).

•

Battery charge level (3).

The left selection key is Go to (4).

The middle selection key is Menu (5).

The right selection key is Names (6) or

another shortcut to a function that you

selected. See “My shortcuts”, p. 45. Operator variants may have an

operator-specific name to access an operator-specific Web site.

Personal shortcut list

The left selection key is Go to.

To view the functions in the personal shortcut list, select Go to. To

activate a function, select it.

Yo u r p h o n e

To view a list with available functions, select Go to > Options > Select

options. To add a function to the shortcut list, select Mark. To remove a

function from the list, select Unmark.

To rearrange the functions on your personal shortcut list, select Go to >

Options > Organise. Select the desired function and Move and the place

where you want to move the function.

Shortcuts in the standby mode

•

To access the list of dialed numbers, press the call key once. Scroll to

the number or name that you want; and to call the number, press the

call key.

•

To open the Web browser, press and hold 0.

To call your voice mailbox, press and hold 1.

Use the navigation key as a shortcut. See “My shortcuts”, p. 45.

Power saving

When the phone fold is opened, a digital clock view

overwrites the display when no function of the phone

has been used for a certain period of time. To activate

the power saver, see Power saver in “Display”, p. 46. To

deactivate the screen saver, press any key.

Yo u r p h o n e

Indicators

You received one or several text or picture messages. See “Read

and reply to a message”, p. 20.

You received one or several multimedia messages. See “Read and

reply to a message”, p. 20.

The phone registered a missed call. See “Call register”, p. 35.

The keypad is locked. See “Keypad lock (keyguard)”, p. 10.

The phone does not ring for an incoming call or text message

when Incoming call alert and Message alert tone are set off. See

“Tones”, p. 45.

The alarm clock is set to On. See “Alarm clock”, p. 56.

When the packet data connection mode Always online is selected

and the packet data service is available, the indicator is shown.

See “Connectivity”, p. 50.

A packet data connection is established. See “Connectivity”, p. 50

and “Browse pages”, p. 66.

The packet data connection is suspended (on hold), for example, if

there is an incoming or outgoing call during a packet data dial-up

connection.

Yo u r p h o n e

■ Keypad lock (keyguard)

To prevent the keys from being accidentally pressed, select Menu, and

press * within 1.5 seconds to lock the keypad.

To unlock the keypad, select Unlock, and press *. If the Security keyguard

is set On, enter the security code if requested.

To answer a call when the keyguard is on, press the call key. When you end

or reject the call, the keypad automatically locks.

For Security keyguard, see “Phone”, p. 49.

When the keyguard is on, calls may be possible to the official emergency

number programmed into your device.

C a l l f u n c t i o n s

3. Call functions

■ Make a call

1. Enter the phone number, including the area code.

For international calls, press * twice for the international prefix (the +

character replaces the international access code) and then enter the

country code, the area code without the leading 0, if necessary, and

the phone number.

2. To call the number, press the call key.

3. To end the call or to cancel the call attempt, press the end key, or close

the phone fold.

To make a call using names, search for a name or phone number in

Contacts. See “Search for a contact”, p. 36. Press the call key to call the

number.

To access the list of numbers you last called or attempted to call, press the

call key once in the standby mode. To call the number, scroll to a number

or name, and press the call key.

Speed dialing

Assign a phone number to one of the speed-dialing keys, 2 to 9. See

“Speed dials”, p. 42. Call the number in either of the following ways:

•

Press a speed-dialing key, then press the call key.

C a l l f u n c t i o n s

•

If Speed dialling is set to On, press and hold a speed-dialing key until

the call begins. See Speed dialling in “Call”, p. 47.

■ Answer or reject a call

To answer an incoming call, press the call key, or open the phone fold

when Answer when fold is opened is set On, see “Call”, p. 47. To end the

call, press the end key, or close the phone fold.

To reject an incoming call, press the end key, or if the phone fold is

opened, close the phone fold. To reject an incoming call when the phone

fold is closed, open the phone fold, and press the end key.

Tip: If the Divert if busy function is activated to divert the calls (for

example, to your voice mailbox) rejecting an incoming call also

diverts the call. See “Call”, p. 47.

If a compatible headset supplied with the headset key is connected to the

phone, to answer and end a call, press the headset key.

Call waiting

To answer the waiting call during an active call, press the call key. The first

call is put on hold. To end the active call, press the end key.

To activate the Call waiting function, see “Call”, p. 47.

C a l l f u n c t i o n s

■ Options during a call

Many of the options that you can use during a call are network services.

For availability, contact your network operator or service provider.

During a call, select Options and from the following options:

Call options are Mute or Unmute, Contacts, Menu, Lock keypad,

Loudspeaker or Handset.

Network services options are Answer and Reject, Hold or Unhold, New

call, Add to conference, End call, End all calls, and the following:

Send DTMF — to send tone strings

Swap — to switch between the active call and the call on hold

Transfer — to connect a call on hold to an active call and disconnect

yourself

Conference — to make a conference call that allows up to six persons to

take part in a conference call

Private call —to discuss privately in a conference call

Warning: Do not hold the device near your ear when the

loudspeaker is in use, because the volume may be extremely loud.

W r i t e t e x t

4. Write text

You can enter text (for example, when writing messages) using traditional

or predictive text input. When using traditional text input, press a number

key, 1 to 9, repeatedly until the desired character appears. In predictive

text input you can enter a letter with a single keypress.

When you are writing text, predictive text input is indicated by

traditional text input by at the top left of the display.

appear next to the text input indicator, indicating the character

and

, or

case.

To change the character case and the text input mode, press #.

indicates number mode. To change from the letter to number mode, press

and hold #, and select Number mode.

■ Settings

To set the writing language, select Options > Writinglanguage. Predictive

text input is only available for the languages listed.

Select Options > Dictionary on to set the predictive text input or

Dictionary off to set traditional text input.

W r i t e t e x t

■ Predictive text input

Predictive text input is based on a built-in dictionary to which you can

also add new words.

1. Start writing a word using the 2 to 9 keys. Press each key only once for

a single letter. The word changes after each keypress.

2. W h en you have finished writing the word and it is correct, to confirm

it, press 0 to add a space, or press any of the navigation keys. Press a

navigation key to move the cursor.

If the word is not correct, press * repeatedly, or select Options >

Matches. When the word that you want appears, confirm it.

If ? is displayed after the word, the word you intended to write is not in

the dictionary. To add the word to the dictionary, select Spell. Enter

the word (traditional text input is used), and select Save.

3. Start writing the next word.

Write compound words

Enter the first part of the word, and press the right navigation key to

confirm it. Write the last part of the word, and confirm the word.

■ Traditional text input

Press a number key, 1 to 9, repeatedly until the desired character appears.

Not all characters available under a number key are printed on the key.

The characters available depend on the writing language. See “Settings”,

p. 14.

W r i t e t e x t

If the next letter you want is located on the same key as the present one,

wait until the cursor appears, or press any of the navigation keys and

enter the letter.

The most common punctuation marks and special characters are available

under the 1 key.

N a v i g a t e t h e m e n u s

5. Navigate the menus

The phone offers you an extensive range of functions, which are grouped

into menus.

1. To access the menu, select Menu. To change the menu view, select

Options > Main menu view > List or Grid.

2. Scroll through the menu, and select a submenu (for example, Settings).

3. If the menu contains submenus, select the one that you want (for

example, Call).

4. If the selected menu contains further submenus, select the one that

you want (for example, Anykey answer).

5. Select the setting of your choice.

6. To return to the previous menu level, select Back. To exit the menu,

select Exit.

M e s s a g e s

6. Messages

The message services can only be used if they are supported by your

network or your service provider.

Note: When sending messages, your phone may display the

words Message sent. This is an indication that the message has

been sent by your device to the message center number

programmed into your device. This is not an indication that the

message has been received at the intended destination. For more

details about messaging services, check with your service

provider.

Important: Exercise caution opening messages. Messages may

contain malicious software or otherwise be harmful to your

device or PC.

Only devices that have compatible features can receive and

display messages. The appearance of a message may vary

depending on the receiving device.

■ Text messages (SMS)

Using the short message service (SMS) you can send and receive multipart

messages made of several ordinary text messages (network service) that

can contain pictures.

Before you can send any text, picture, or e-mail message, you must save

your message center number. See “Message settings”, p. 31.

M e s s a g e s

To check SMS e-mail service availability and to subscribe to the service,

contact your service provider.

Your device supports the sending of text messages beyond the character

limit for a single message. Longer messages are sent as a series of two or

more messages. Your service provider may charge accordingly.

Characters that use accents or other marks, and characters from some

language options like Chinese, take up more space limiting the number of

characters that can be sent in a single message.

At the top of the display, you can see the message length indicator that

tracks the number of characters available. For example, 10/2 means that

you can still add 10 characters for the text to be sent as two messages.

Write and send a message

1. Select Menu > Messages > Create message > Text message.

2. Enter a message. See “Write text”, p. 14. To insert text templates or a

picture into the message, see “Templates”, p. 21. Each picture message

comprises several text messages. Sending one picture or multipart

message may cost more than sending one text message.

3. To send the message, select Send > Recently used, To phone number,

To many, or To e-mail address. To send a message using a predefined

message profile, select Via sending profile. For the message profile, see

“Text and SMS e-mail”, p. 31. Select or enter a phone number or e-mail

address, or select a profile.

M e s s a g e s

Note: The picture message function can be used only if it is

supported by your network operator or service provider. Only

compatible devices that offer picture message features can

receive and display picture messages. The appearance of a

message may vary depending on the receiving device.

Read and reply to a message

is shown when you received an SMS message or an SMS e-mail. The

blinking

indicates that the message memory is full. Before you can

receive new messages, delete some of your old messages in the Inbox

folder.

1. To view a new message, select Show. To view it later, select Exit.

To read the message later, select Menu > Messages > Inbox. If more

than one message is received, select the message that you want to

read.

indicates an unread message.

2. While reading a message, select Options and delete or forward the

message; edit the message as a text message or an SMS e-mail,

rename the message you are reading or move it to another folder; or

view or extract message details. You can also copy text from the

beginning of the message to your phone calendar as a reminder note.

To save the picture in the Templates folder when reading a picture

message, select Options >Save picture.

M e s s a g e s

3. To reply as a message, select Reply > Text message, Multimedia msg.,

or Flash message. Enter the reply message. When replying to an

e-mail, first confirm or edit the e-mail address and subject.

4. To send the message to the displayed number, select Send > OK.

Templates

Your phone has text templates and picture templates

use in text, picture, or SMS e-mail messages.

that you can

To access the template list, select Menu > Messages > Saveditems > Text

messages > Templates.

■ Multimedia messages (MMS)

A multimedia message can contain text, a picture, a calendar note, or a

business card. If the message is too large, the phone may not be able to

receive it. Some networks allow text messages that include an Internet

address where you can view the multimedia message.

Note: Only devices that have compatible features can receive

and display multimedia messages. The appearance of a message

may vary depending on the receiving device.

You cannot receive multimedia messages during a call, a game, another

Java application, or an active browsing session. Because delivery of

multimedia messages can fail for various reasons, do not rely solely upon

them for essential communications.

M e s s a g e s

Write and send a message

To set the settings for multimedia messaging, see “Multimedia”, p. 31. To

check availability and to subscribe to the multimedia messaging service,

contact your service provider.

1. Select Menu > Messages > Create message > Multimedia msg..

2. Enter a message. See “Write text”, p. 14.

To insert a file, select Options > Insert and from the following options:

Image — to insert a file from Gallery

Sound Clip — to insert a sound file from Gallery

Business card or Calendar note — to insert a business card or a

calendar note in the message

Slide — to insert a slide to the message. Your phone supports

multimedia messages that contain several pages (slides). Each slide

can contain text, one image, a calendar note, and a business card. To

open a desired slide if the message contains several slides, select

Options > Previous slide, Next slide, or Slide list. To set the interval

between the slides, select Options > Slide timing. To move the text

component to the top or bottom of the message, select Options >

Place text first or Place text last.

The following options may also be available: Delete to delete an

image or slide from the message, Clear text, Preview, or Save message.

In Moreoptions the following options may be available: Insert contact,

Insert number, Message details, and Edit subject.

M e s s a g e s

3. To send the message, select Send > Recently used, To phone number,

To e-mail address, or To many.

4. Select the contact from the list, or enter the recipient’s phone number

or e-mail address, or search for it in Contacts. Select OK. The message

is moved to the Outbox folder for sending.

While the multimedia message is being sent, the animated indicator

is displayed, and you can use other functions on the phone. If the

sending fails, the phone tries to resend it a few times. If this fails,

the message remains in the Outbox folder, and you can try to resend it

later.

If you select Save sent messages > Yes, the sent message is saved in

the Sent items folder. See “Multimedia”, p. 31. When the message is

sent, it is not an indication that the message has been received at the

intended destination.

content from being copied, modified, transferred or forwarded.

Read and reply to a message

The default setting of the multimedia message service is generally on.

Important: Exercise caution when opening messages.

Multimedia message objects may contain malicious software

or otherwise be harmful to your device or PC.

When your phone receives a multimedia message, the animated

displayed. When the message has been received,

and Multimedia

message received are shown.

M e s s a g e s

1. To read the message, select Show. To view it later, select Exit.

To read the message later, select Menu > Messages > Inbox. In the list

of messages,

indicates an unread message. Select the message that

you want to view.

2. The function of the middle selection key changes according to the

currently displayed attachment in the message.

To view the whole message if the received message contains a

presentation, select Play.

To zoom in on an image, select Zoom. To view a business card or

calendar note or to open a theme object, select Open.

3. To reply to the message, select Options > Reply > Text message,

Multimedia msg., or Flash message. Enter the reply message, and

select Send. You can send the reply message only to the person who

sent you the original message.

Select Options to access available options.

The wireless network may limit the size of MMS messages. If the inserted

picture exceeds this limit, the device may make it smaller so that it can be

sent by MMS.

■ Memory full

When you have received a new text message and the message memory is

full,

blinks and Text msgs. memory full. Delete msgs. is shown. Select

No, and delete some messages from a folder. To discard the waiting

message, select Exit > Yes.

M e s s a g e s

When you have a new multimedia message waiting and the memory for

the messages is full,

blinks and Multimedia memory full. View waiting

msg. is shown. To view the waiting message, select Show. Before you can

save the waiting message, delete old messages to free memory space. To

save the message, select Options > Save message.

To discard the waiting message, select Exit > Yes. If you select No, you

can view the message.

■ Folders

The phone saves received text and multimedia messages in the Inbox

folder.

Multimedia messages that have not yet been sent are moved to the

Outbox folder.

If you select Message settings > Text messages > Save sent messages >

Yes, and Message settings > Multimedia msgs. > Save sent messages >

Yes, the sent messages are saved in the Sent items folder.

To save the text message that you are writing and wish to send later in the

Saveditems folder, select Options > Savemessage > Savedtext msgs.. For

multimedia messages, select Options >Save message.

indicates

unsent messages.

To organize your text messages, you can move some of them to My folders

or add new folders for your messages. Select Messages > Saved items >

Text messages > My folders.

M e s s a g e s

To add a folder, select Options > Add folder. If you have not saved any

folders, select Add.

To delete or rename a folder, scroll to the desired folder, and select

Options > Delete folder or Rename folder.

■ Flash messages

Flash messages are text messages that are instantly displayed upon

reception.

Write a flash message

Select Menu > Messages > Create message > Flash message. Write your

message. The maximum length of a flash message is 70 characters. To

insert a blinking text into the message, select Insert blink char. from the

options list to set a marker. The text after the marker blinks until a second

marker is inserted.

Receive a flash message

A received flash message is not automatically saved. To read the message,

select Read. To extract phone numbers, e-mail addresses, user ID, and

Web site addresses from the current message, select Options > Usedetail.

To save the message, select Save and the folder in which you want to save

the message.

M e s s a g e s

■ E-mail application

The e-mail application (network service) allows you to access your

compatible e-mail account from your phone when you are not in the

office or at home. This e-mail application is different from the SMS and

MMS e-mail function.

Your phone supports POP3 and IMAP4 e-mail servers. Before you can send

and retrieve any e-mail, you may need to do the following:

•

Obtain a new e-mail account or use the current one. For availability of

your e-mail account contact your e-mail service provider.

•

For the settings required for e-mail, contact your e-mail service

provider. You may receive the e-mail configuration settings as a

configuration message. See “Configuration settings service”, p. xii.

You can also enter the settings manually. See “Configuration”, p. 51.

To activate the e-mail settings, select Menu > Messages > Message

settings > E-mail messages. See “E-mail”, p. 33.

Write and send an e-mail

1. Select Menu > Messages > E-mail > Create e-mail.

2. Enter the recipient’s e-mail address, a subject, and the e-mail

message.

To attach a file to the e-mail, select Options > Attach and the file in

Gallery.

3. Select Send > Send now.

M e s s a g e s

Download e-mail

1. To access the e-mail application, select Menu > Messages > E-mail.

2. To download e-mail messages that have been sent to your e-mail

account, select Retrieve.

To download new e-mail messages and to send e-mail that has been

saved in the Outbox folder, select Options > Retrieve and send.

To download first the headings of the new e-mail messages that have

been sent to your e-mail account, select Options > Check new e-mail.

Then, to download the selected e-mail, mark the desired ones, and

select Options > Retrieve.

3. Select the new message in Inbox. To view it later, select Back.

indicates an unread message.

Read and reply to e-mail

Important: Exercise caution when opening messages.

E-mail messages may contain malicious software or

otherwise be harmful to your device or PC.

Select Menu > Messages > E-mail > Inbox and the desired message.

While reading the message, select Options to view the available options.

To reply to an e-mail, select Reply > Empty screen or Original text.

To reply to many, select Options > Reply to all. Confirm or edit the e-mail

address and subject; then write your reply. To send the message, select

Send > Send now.

M e s s a g e s

Inbox and other folders

Your phone saves e-mail that you have downloaded from your e-mail

account in the Inbox folder. Other folders contains the following folders:

Drafts for saving unfinished e-mail, Archive for organizing and saving

your e-mail, Outbox for saving e-mail that has not been sent, and Sent

items for saving e-mail that has been sent.

To manage the folders and their e-mail content, select Options >

Manage folder.

Delete e-mail messages

Select Menu > Messages > E-mail > Options > Manage folder and the

desired folder. Mark the messages that you want to delete. To delete

them, select Options > Delete.

Deleting an e-mail from your phone does not delete it from the e-mail

server. To set the phone to delete the e-mail also from the e-mail server,

select Menu > Messages > E-mail > Options > Extra settings > Leave

copy: > Delete retr. msgs.

■ Voice messages

The voice mailbox is a network service and you may need to subscribe to

it. For details, contact your service provider.

To call your voice mailbox, select Menu > Messages > Voice messages >

Listen to voice messages. To enter, search for, or edit your voice mailbox

number, select Voice mailbox number.

M e s s a g e s

If supported by the network,

indicates that there are new voice

messages. Select Listen to call your voice mailbox number.

■ Info messages

Select Menu > Messages > Info messages. With the Info messages

network service, you can receive messages on various topics from your

service provider. To check availability, topics, and the relevant topic

numbers, contact your service provider.

■ Service commands

Select Menu > Messages > Service commands. Write and send service

requests (also known as USSD commands) to your service provider, such

as activation commands for network services.

■ Delete messages

To delete all messages from a folder, select Menu > Messages > Delete

messages and the folder from which you want to delete the messages.

Select Yes, and if the folder contains unread messages, the phone asks

whether you want to delete them also. Select Yes again.

M e s s a g e s

■ Message settings

Text and SMS e-mail

The message settings affect the sending, receiving, and viewing of

messages.

Select Menu > Messages > Message settings > Text messages and from

the following options:

Sending profile — If more than one message profile set is supported by

your SIM card, select the set you want to change.

The following options may be available: Message centre number

(delivered from your service provider), Messages sent via, Message

validity, Default recipient number (text messages) or E-mail server

(e-mail), Deliveryreports, Usepacket data, Replyvia samecentre (network

service), and Rename sending profile.

Save sent messages > Yes — Set the phone to save the sent text messages

in the Sent items folder.

Automatic resending > On — The phone automatically attempts to resend

a text message, if the sending has failed.

Multimedia

The message settings affect the sending, receiving, and viewing of

multimedia messages.

M e s s a g e s

Select Menu > Messages > Message settings > Multimedia msgs. and

from the following options:

Save sent messages > Yes — to set the phone to save sent multimedia

messages in the Sent items folder.

Delivery reports — to ask the network to send delivery reports about your

messages (network service).

Scale image down — to define the image size when you insert an image to

a multimedia message.

Default slide timing — to define the default time between slides in

multimedia messages.

Allow multimedia reception > Yes or No — to receive or to block the

multimedia message. If you select In home network, you cannot receive

multimedia messages when outside your home network.

Incomingmultimedia messages > Retrieve, Retrievemanually, or Reject —

to allow the reception of multimedia messages automatically, manually

after being prompted, or to reject the reception.

Configuration settings > Configuration — Only the configurations that

support multimedia messaging are shown. Select a service provider,

Default, or Personalconfig. for multimedia messaging. Select Account and

a multimedia messaging service account contained in the active

configuration settings.

Allow adverts — to receive or reject advertisements. This setting is not

shown if Allow multimedia reception is set to No.

M e s s a g e s

E-mail

The settings affect the sending, receiving, and viewing of e-mail.

You may receive the configuration settings for the e-mail application as

a configuration message. See “Configuration settings service”, p. xii.

You can also enter the settings manually. See “Configuration”, p. 51.

To activate the settings for the e-mail application, select Menu >

Messages > Message settings > E-mail messages and from the following

options:

Configuration — Select the set that you want to activate.

Account — Select an account provided by the service provider.

My name — Enter your name or nickname.

E-mail address — Enter your e-mail address.

Include signature — You can define a signature that is automatically

added to the end of your e-mail when you write your message.

Reply-to address — Enter the e-mail address to which you want the

replies to be sent.

SMTP user name — Enter the name that you want to use for outgoing

mail.

SMTP password — Enter the password that you want to use for outgoing

mail.

Incoming server type — Select POP3 or IMAP4, depending on the type of

e-mail system that you use. If both types are supported, select IMAP4.

Incoming mail settings — Select available options for POP3 or IMAP4.

M e s s a g e s

Other settings

To select other settings for messages, select Menu > Messages >

Messagesettings > Othersettings. To change the font size for reading and

writing messages, select Font size. To replace character-based smileys

with graphical ones, select Graphical smileys > Yes.

■ Message counter

Select Menu > Messages > Message counter for approximate

information on your recent communications.

C a l l r e g i s t e r

7. Call register

The phone registers the phone numbers of identified missed,

received, and dialed calls; the message recipients; and the approximate

length of your calls.

The phone registers if it is switched on and within the network service

area, and the network supports these functions.

■ Recent calls lists

When you select Options in the Missed calls, Received calls, Dialled

numbers, or Message Recipients menu, you can view the time of the call;

edit, view, or call the registered phone number; add it to the memory; or

delete it from the list. You can also send a text message. To delete the

recent calls lists, select Delete recent calls.

■ Counters and timers

Note: The actual invoice for calls and services from your service

provider may vary, depending on network features, rounding-off

for billing, taxes, and so forth.

Some timers, including the life timer, may be reset during service or

software upgrades.

Select Menu > Call register > Call duration, Packet data counter, or

Packet data conn. timer for approximate information on your recent

communications.

C o n t a c t s

8. Contacts

You can save names and phone numbers (Contacts) in the

phone memory and SIM card memory.

The phone memory may save contacts with numbers and text items. You

can also save an image for a certain number of names.

Names and numbers saved in the SIM card memory are indicated by

■ Search for a contact

Select Menu > Contacts > Names > Options > Search. Scroll through the

list of contacts, or enter the first letter of the name for which you are

searching.

■ Save names and phone numbers

Names and numbers are saved in the used memory. Select Menu >

Contacts > Names > Options > Add new contact. Enter the name and the

phone number.

■ Save numbers, items, or an image

In the phone memory for contacts, you can save different types of phone

numbers and short text items per name.

C o n t a c t s

The first number you save is automatically set as the default number. It is

indicated with a frame around the number type indicator (for example,

). When you select a name (for example, to make a call), the default

number is used unless you select another number.

1. Make sure that the memory in use is Phone or Phone and SIM.

2. Scroll to the name to which you want to add a new number or text

item, and select Details > Options > Add detail.

3. To add a number, select Number and a number type.

To add another detail, select a text type or an image from Gallery.

To search for an ID from the server of your service provider if you have

connected to the presence service, select User ID > Search. See “My

presence”, p. 39. If only one ID is found, it is automatically saved.

Otherwise, to save the ID, select Options > Save. To enter the ID, select

Enter ID manually.

To change the number type, scroll to the desired number, and select

Options > Change type. To set the selected number as the default

number, select Set as default.

4. Enter the number or text item; to save it, select OK.

5. To return to the standby mode, select Back > Exit.

C o n t a c t s

■ Copy contacts

Search for the contact you want to copy, and select Options > Copy. You

can copy names and phone numbers from the phone contact memory to

the SIM card memory, or vice versa. The SIM card memory can save names

with one phone number attached to them.

■ Edit contact details

1. Search for the contact you want to edit, select Details, and scroll to

the desired name, number, text item, or image.

2. To edit a name, number, or text item, or to change an image, select

Options > Edit name, Edit number, Edit detail, or Change image.

You cannot edit an ID when it is on the IM contacts or Subscribed

names list.

■ Delete contacts or contact details

To delete all the contacts and the details attached to them from the

phone or SIM card memory, select Menu > Contacts > Delete all

contacts > From phone mem. or From SIM card. Confirm with the security

code.

To delete a contact, search for the desired contact, and select Options >

Delete contact.

C o n t a c t s

To delete a number, text item, or an image attached to the contact, search

for the contact, and select Details. Scroll to the desired detail, and select

Options > Delete > Delete number, Delete detail, or Delete image.

Deleting an image from contacts does not delete it from Gallery.

■ Business cards

You can send and receive a person’s contact information from a

compatible device that supports the vCard standard as a business card.

To send a business card, search for the contact whose information you

want to send, and select Details > Options > Send bus. card > Via

multimedia or Via text message.

When you have received a business card, select Show > Save to save the

business card in the phone memory. To discard the business card, select

Exit > Yes.

■ My presence

With the presence service (network service) you can share your presence

status with other users with compatible devices and access to the service.

Presence status includes your availability, status message, and personal

logo. Other users who have access to the service and who request your

information are able to see your status. The requested information is

shown in Subscribed names in the viewers’ Contacts menu. You can

personalize the information that you want to share with others and

control who can see your status.

C o n t a c t s

Before you can use presence, you must subscribe to the service. To check

the availability and costs, and to subscribe to the service, contact your

network operator or service provider, from whom you also receive your

unique ID, password, and the settings for the service. See “Configuration”,

p. 51.

While you are connected to the presence service, you can use the other

functions of the phone; the presence service is active in the background.

If you disconnect from the service, your presence status is shown for a

certain amount of time to viewers, depending on the service provider.

Select Menu > Contacts > My presence and from the following options:

Connect to 'My presence' service or Disconnect from service — to connect

to or disconnect from the service

View my presence — to view the status in Private pres. and Public presence

Edit mypresence — to change your presence status. Select My availability,

My presence message, My presence logo, or Show to.

My viewers > Current viewers, Private list, or Blocked list

Settings > Show current presence in idle, Synchronise with profiles,

Connection type, or Presence settings

■ Subscribed names

You can create a list of contacts whose presence status information you

want to be aware of. You can view the information if it is allowed by the

contacts and the network. To view these subscribed names, scroll through

the contacts or use the Subscribed names menu.

C o n t a c t s

Make sure that the memory in use is Phone or Phone and SIM.

To connect to the presence service, select Menu > Contacts >

My presence > Connect to 'My presence' service.

Add contacts to subscribed names

1. Select Menu > Contacts > Subscribed names.

2. If you have no contacts on your list, select Add. Otherwise,

select Options > Subscribe new. The list of your contacts is shown.

3. Select a contact from the list, and if the contact has a saved user ID,

the contact is added to the subscribed names list.

View subscribed names

To view the presence information, see “Search for a contact”, p. 36.

1. Select Menu > Contacts > Subscribed names.

The status information of the first contact on the subscribed names

list is displayed. The information that the person wants to give to the

others may include text and some of the following icons:

, or indicates that the person is available, busy, or not

available.

indicates that the person’s presence information is not available.

2. Select Details to view the details of the selected contact; or select

Options > Subscribe new, Send message, Send bus. card, or

Unsubscribe.

C o n t a c t s

Unsubscribe a contact

To unsubscribe a contact from the Contacts list, select the contact and

Details > the user ID > Options > Unsubscribe > Yes.

To unsubscribe, use the Subscribed names menu. See “View subscribed

names”, p. 41.

■ Settings

Select Menu > Contacts > Settings and from the following options:

Memory in use — to select the SIM card or phone memory for your

contacts

Contacts view — to select how the names and numbers in contacts are

displayed

Memory status — to view the free and used memory capacity

■ Groups

Select Menu > Contacts > Groups to arrange the names and phone

numbers saved in the memory into caller groups with different ringing

tones and group images.

■ Speed dials

To assign a number to a speed-dialing key, select Menu > Contacts >

Speed dials, and scroll to the speed-dialing number that you want.

C o n t a c t s

Select Assign, or if a number has already been assigned to the key, select

Options > Change. Select Search, the name, then the number you want

to assign. If the Speed dialling function is off, the phone asks whether you

want to activate it. See also Speed dialling in “Call”, p. 47.

To make a call using the speed-dialing keys, see “Speed dialing”, p. 11.

■ Info, service, and my numbers

Select Menu > Contacts and from the following functions:

Info numbers — to call the information numbers of your service provider if

the numbers are included on your SIM card (network service)

Service numbers — to call the service numbers of your service provider if

the numbers are included on your SIM card (network service)

My numbers — to view the phone numbers assigned to your SIM card if

the numbers are included on your SIM card

S e t t i n g s

9. Settings

■ Profiles

Your phone has various setting groups, called profiles, for which you can

customize the phone tones for different events and environments.

Select Menu > Settings > Profiles. Scroll to a profile, and select it.

To activate the selected profile, select Activate.

To set the profile to be active until a certain time up to 24 hours, select

Timed and set the time the profile setting shall end. When the time set for

the profile expires, the previous profile that was not timed becomes

active.

To personalize the profile, select Personalise. Select the setting you want

to change, and make the changes. To change your presence status

information, select My presence > My availability or My presence

message. The My presence menu is available if you set Synchronise with

profiles to On. See “My presence”, p. 39.

■ Themes

A theme contains many elements for personalizing your phone, such as

wallpaper, screen saver, color scheme, and a ringing tone (your phone

supports MP3 format ringing tone).

Select Menu > Settings > Themes and from the following options:

S e t t i n g s

Select theme — to set a theme in your phone. A list of folders in Gallery

opens. Open the Themes folder, and select a theme.

Theme downloads — to open a list of links to download more themes. See

“Download files”, p. 70.

■ Tones

You can change the settings of the selected active profile.

Select Menu > Settings > Tones. Select and change Incoming call alert,

Ringing tone, Ringing volume, Vibrating alert, Message alert tone, Instant

message alert tone, Keypad tones, and Warning tones. You can find the

same settings in the Profiles menu. See “Profiles”, p. 44.

To set the phone to ring only for calls from phone numbers that belong to

a selected caller group, select Alert for. Scroll to the caller group you want

or All calls, and select Mark.

■ Lights

To set the pulsating light on to inform your phone status changes when

the fold is closed, select Menu > Settings > Lights > Light effects > On.

■ My shortcuts

With personal shortcuts, you get quick access to often used functions of

the phone. To manage the shortcuts, select Menu > Settings > My

shortcuts and from the following options:

S e t t i n g s

Right selection key — to select a function from the list for the right

selection key. See also “Standby mode”, p. 7. This menu may not be shown,

depending on your service provider.

Navigation key — to select shortcut functions for the navigation key.

Scroll to the desired navigation key, and select Change and a function

from the list. To remove a shortcut function from the key, select (empty).

To reassign a function for the key, select Assign. This menu may not be

shown, depending on your service provider.

■ Display

Select Menu > Settings > Display and from the following options:

Wallpaper — to add the background image to the display in the standby

mode. To select, activate, or deactivate the wallpaper, select Select

wallpaper, On or Off. Select Select slide set and a folder in the Gallery to

use the images in the folder as a slide set. To download more images for

wallpaper, select Graphic downloads.

Screen saver > On — to activate the screen saver for the display. To set

the time after which the screen saver is activated, select Time-out. To

select a graphic for the screen saver, select Screen savers > Image and

choose an image or a graphic from the Gallery. To download more images

for the screen saver, select Graphic downloads.

Power saver > On — to save some battery power. A digital clock is

displayed when no function of the phone is used for a certain time.

S e t t i n g s

Colour schemes — to change the color in some display components, for

example, menu background color and signal and battery bar colors

Idle state font colour — to select the color for the texts on the display in

the standby mode

Operator logo — to set your phone to display or hide the operator logo.

The menu is dimmed if you have not saved the operator logo. For more

information on availability of an operator logo, contact your network

operator or service provider.

■ Time and date

Select Menu > Settings > Time and date and from the following options:

Clock — to set the phone to show the clock in the standby mode, adjust

the clock, and select the time zone and the time format

Date — to set the phone to show the date in the standby mode, set the

date, and select the date format and date separator

Auto-update of date & time (network service) — to set the phone to

automatically update the time and date according to the current time

zone

■ Call

Select Menu > Settings > Call and from the following options:

S e t t i n g s

Call divert (network service) — to divert your incoming calls. You may not

be able to divert your call, if some call barring functions are active. See

Call barring service in “Security”, p. 53.

Anykey answer > On — to answer an incoming call, briefly press any key,

except the end key and the left and right selection keys.

Answer when fold is opened > On — to answer an incoming call directly

when you open the phone fold.

Automatic redial > On — to set your phone to make a maximum of 10

attempts to connect the call after an unsuccessful call attempt

Speed dialling > On — to activate speed dialling. To set up speed dialling,

see “Speed dials”, p. 42. To dial, press and hold the corresponding number

key.

Call waiting > Activate — to set the network to notify you of an incoming

call while you have a call in progress (network service). See “Call waiting”,

p. 12.

Summary after call > On — to briefly display the approximate duration

and cost (network service) of the call after each call

Send my caller ID (network service) > Set by network or Yes, No

Line for outgoing calls (network service) — to select the phone line 1 or 2

to make calls, if supported by your SIM card

S e t t i n g s

■ Phone

Select Menu > Settings > Phone and from the following options:

Phone language — to set the display language

Memory status — to view the free memory and the used memory in

Gallery, Messages, and Applications

Security keyguard — to set the phone to ask for the security code when

you unlock the keyguard. Enter the security code, confirm it and select On.

When the keyguard is on, calls still may be possible to the official

emergency number programmed into your device.

Cell info display > On — to receive information from the network operator

depending on the network cell used (network service)

Welcome note — to enter a welcome note to be shown briefly when the

phone is switched on

Operator selection > Automatic — to set the phone automatically to

select one of the cellular networks available in your area. With Manual,

you can select a network that has a roaming agreement with your home

network operator.

Confirm SIM service actions — See “SIM services”, p. 77.

Help text activation — to select whether the phone shows help texts

Start-up tone — to select whether the phone plays a start-up tone when

the phone is switched on

S e t t i n g s

■ Connectivity

General packet radio service (GPRS) is a network service that allows

mobile phones to be used for sending and receiving data over an Internet

Protocol (IP)-based network. GPRS is a data bearer that enables wireless

access to data networks such as the Internet.

The applications that may use GPRS are MMS, browsing, and Java

application downloading.

Before you can use GPRS technology, contact your network operator or

service provider for availability of and subscription to the GPRS service.

Save the GPRS settings for each of the applications used over GPRS. For

information on pricing, contact your network operator or service provider.

Select Menu > Settings > Connectivity > Packet data > Packet data

connection to establish an GPRS connection.

To set the phone to automatically register to an GPRS network when you

switch on the phone, select Always online.

To set the phone to register to an GPRS network and establish a

connection when an application needs it, and end the connection when

you end the application, select When needed.

■ Enhancements

This menu is shown only if the phone is or has been connected to a

compatible mobile enhancement.

S e t t i n g s

Select Menu > Settings > Enhancements. You can select an enhancement

menu if the corresponding enhancement is, or has been, connected to the

phone. Depending on the enhancement, select from the following

options:

Default profile — to select the profile that you want to be automatically

activated when you connect to the selected enhancement

Automatic answer — to set the phone to answer an incoming call

automatically after 5 seconds. If Incoming call alert is set to Beep once or

Off, automatic answer is off.

Text phone > Use text phone > Yes — to use the text phone settings

instead of headset or loopset settings

■ Configuration

You can configure your phone with settings that are required for certain

services to function correctly. The services are browser, multimedia

messaging, presence, and e-mail application. Get the settings from your

SIM card, from a service provider as a configuration message, or enter

your personal settings manually.

To save the configuration settings received by a configuration message

from a service provider, see “Configuration settings service”, p. xii.

Select Menu > Settings > Configuration and from the following options:

S e t t i n g s

Default configurationsettings — to view the service providers saved in the

phone. Scroll to a service provider, and select Details to view the

applications that the configuration settings of this service provider

support. To set the configuration settings of the service provider as

default settings, select Options > Set as default. To delete configuration

settings, select Delete.

Activate default in all applications — to activate the default configuration

settings for supported applications

Preferred access point — to view the saved access points. Scroll to an

access point, and select Options > Details to view the name of the service

provider, data bearer, and packet data access point .

Connect to service provider support — to download the configuration

settings from your service provider

Personal configuration settings — to add new personal accounts for

various services manually, and to activate or delete them. To add a new

personal account if you have not added any, select Add new; otherwise,

select Options > Add new. Select the service type, and select and enter

each of the required parameters. The parameters differ according to the

selected service type. To delete or activate a personal account, scroll to it,

and select Options > Delete or Activate.

S e t t i n g s

■ Security

When security features that restrict calls are in use (such as call barring,

closed user group, and fixed dialing) calls still may be possible to the

official emergency number programmed into your device.

Select Menu > Settings > Security and from the following options:

PINcoderequest — to set the phone to ask for your PIN or UPIN code every

time the phone is switched on. Some SIM cards do not allow the code

request to be turned off.

Call barring service (network service) — to restrict incoming calls to and

outgoing calls from your phone. A barring password is required.

Fixed dialling — to restrict your outgoing calls to selected phone numbers

if this function is supported by your SIM card.

Closed user group (network service) — to specify a group of people whom

you can call and who can call you.

Security level > Phone — the phone asks for the security code whenever a

new SIM card is inserted into the phone. Select Memory and the phone

asks for the security code when SIM card memory is selected and you

want to change the memory in use.

Access codes — to set the PIN code or UPIN code in use or to change the

security code, PIN code, UPIN code, PIN2 code, and barring password.

Code in use — to select whether the PIN code or UPIN code should be

active.

Pin2 code request — to select whether the PIN2 code is required when

using a specific phone feature which is protected by the PIN2 code.

S e t t i n g s

■ Restore factory settings

To reset some of the menu settings to their original values, select Menu >

Settings > Restore factory sett.. Enter the security code. The data you

have entered or downloaded is not deleted, for example, the names and

phone numbers saved in Contacts.

G a l l e r y

10. Gallery

In this menu you can manage graphics, images, themes, and

tones. These files are arranged in folders.

Your phone supports an activation key system to protect acquired

content. Always check the delivery terms of any content and activation

key before acquiring them, as they may be subject to a fee.

content from being copied, modified, transferred, or forwarded.

To see the list of folders, select Menu > Gallery.

To see the available options of a folder, select a folder > Options.

To view the list of files in a folder, select a folder > Open.

To see the available options of a file, select a file > Options.

Some of the files may be protected by an activation key.

To update the activation key of the selected file, select Options > Activate

content. The option is only shown if the activation key updating is

supported by the file.

To view the list of all available activation keys, select Options >

Activation key list. You can delete the activation keys (for example, delete

the expired ones).

O r g a n i z e r

11. Organizer

■ Alarm clock

You can set the phone to alarm at a desired time. Select Menu >

Organiser > Alarm clock.

To set the alarm, select Alarm time, and enter the alarm time. To change

the alarm time when the alarm time is set, select On. To set the phone to

alert you on selected days of the week, select Repeat alarm.

To select the alarm tone, select Alarm tone.

To set a snooze time-out, select Snooze time-out.

Stop the alarm

The phone sounds an alert tone, and flashes Alarm! and the current time

on the display, even if the phone was switched off. To stop the alarm,

select Stop. If you let the phone continue to sound the alarm for a minute

or select Snooze, the alarm stops for the selected snooze time-out and

then resumes.

If the alarm time is reached while the device is switched off, the device

switches itself on and starts sounding the alarm tone. If you select Stop,

the device asks whether you want to activate the device for calls. Select

No to switch off the device or Yes to make and receive calls. Do not select

Yes when wireless phone use may cause interference or danger.

O r g a n i z e r

■ Calendar

Select Menu > Organiser > Calendar.

The current day is indicated by a frame. If there are any notes set for the

day, the day is in bold type. To view the day notes, select View. To view a

week, select Options > Week view. To delete all notes in the calendar,

select the month or week view, and select Options > Delete all notes.

Other options for the day view may be Make a note, Delete, Edit, Move, or

Repeat a note; Copy a note to another day; Send note as a text message,

as a multimedia message, or to the calendar of another compatible phone.

In Settings you can set the date and time settings. In Auto-delete notes

you can set the phone to delete old notes automatically after a specified

time.

Make a calendar note

Select Menu > Organiser > Calendar. Scroll to the date you want, and

select Options > Make a note and one of the following note types:

Meeting,

Call,

Birthday,

Memo, or

Reminder.

Note alarm

The phone beeps and displays the note. With a call note

on the display,

to call the displayed number, press the call key. To stop the alarm and to

view the note, select View. To stop the alarm for approximately

10 minutes, select Snooze. To stop the alarm without viewing the note,

select Exit.

O r g a n i z e r

■ To-do list

To save notes for tasks that you must do, select Menu > Organiser > To-

do list.

To create a note if no note is added, select Add note; otherwise, select

Options > Add. Write the note, and select Save. Select the priority, the

deadline, and the alarm type for the note.

To view a note, scroll to it, and select View.

You can also select an option to delete the selected note and delete all the

notes that you have marked as done. You can sort the notes by priority or

by deadline, send a note to another phone as a text message or a

multimedia message, save a note as a calendar note, or access the

calendar.

While viewing a note, you can also select an option to edit the deadline or

priority for the note or mark the note as done.

■ Notes

To use this application for writing and sending notes, select Menu >

Organiser > Notes. To create a note if no note is added, select Add note;

otherwise, select Options > Make a note. Write a note, and select Save.

Other options for notes include deleting and editing a note. While editing

a note, you can also exit the text editor without saving the changes. You

can send the note to compatible devices using a text message or

multimedia message.

O r g a n i z e r

■ Calculator

The calculator in your phone adds, subtracts, multiplies, divides,

calculates the square and the square root, and converts currency values.

Note: This calculator has limited accuracy and is designed for

simple calculations.

Select Menu > Organiser > Calculator. When 0 is displayed on the screen,

enter the first number in the calculation. Press the # key for a decimal

point. Select Options > Add, Subtract, Multiply, Divide, Square, Square

root, or Change sign. Enter the second number. For a total, select Equals.

Repeat this sequence as many times as it is necessary. To start a new

calculation, first select and hold Clear.

To perform a currency conversion, select Menu > Organiser > Calculator.

To save the exchange rate, select Options > Exchange rate. Select either

of the displayed options. Enter the exchange rate, press the # key for a

decimal point, and select OK. The exchange rate remains in the memory

until you replace it with another one. To perform the currency conversion,

enter the amount to be converted, and select Options > In domestic or In

foreign.

Note: When you change base currency, you must enter the new

rates because all previously set exchange rates are set to zero.

■ Stopwatch

To measure time, take intermediate times, or take lap times, use the

stopwatch. During timing, the other functions of the phone can be used.

To set the stopwatch timing in the background, press the end key.

O r g a n i z e r

Using the stopwatch or allowing it to run in the background when using

other features increases the demand on battery power and reduces the

battery life.

Select Menu > Organiser > Stopwatch and from the following options:

Split timing — to take intermediate times. To start the time observation,

select Start. Select Split every time that you want to take an

intermediate time. To stop the time observation, select Stop. To save the

measured time, select Save. To start the time observation again, select

Options > Start. The new time is added to the previous time. To reset the

time without saving it, select Reset. To set the stopwatch timing in the

background, press the end key.

Lap timing — to take lap times. To set the stopwatch timing in the

background, press the end key.

Continue — to view the timing that you have set in the background

Show last — to view the most recently measured time if the stopwatch is

not reset

View times or Delete times — to view or delete the saved times

■ Countdown timer

Select Menu > Organiser > Countdown Timer. Enter the alarm time in

hours, minutes, and seconds, and select OK. If you wish, write your own

note text that is displayed when the time expires. To start the countdown

timer, select Start. To change the countdown time, select Change time. To

stop the timer, select Stop timer.

O r g a n i z e r

If the alarm time is reached when the phone is in the standby mode, the

phone sounds a tone and flashes the note text if it is set or Countdown

time up. To stop the alarm, press any key. If no key is pressed, the alarm

automatically stops within 60 seconds. To stop the alarm and to delete

the note text, select Exit. To restart the countdown timer, select Restart.

A p p l i c a t i o n s

12. Applications

■ Games

Your phone software includes some games.

Launch a game

Select Menu > Applications > Games. Scroll to the desired game, and

select Open.

For options related to a game, see “Other application options”, p. 63.

Game downloads

Select Menu > Applications > Options > Downloads > Game downloads.

The list of available bookmarks is shown. Select Morebookmarks to access

the list of bookmarks in the Web menu. See “Bookmarks”, p. 69.

Important: Only install and use applications and other software

from sources that offer adequate security and protection against

harmful software.

Game settings

To set sounds, lights, and shakes for the game, select Menu >

Applications > Options > App. settings.

A p p l i c a t i o n s

■ Collection

Your phone software includes some Java applications specially designed

for this Nokia phone.

Launch an application

Select Menu > Applications > Collection. Scroll to an application, and

select Open.

Other application options

Delete — to delete the application or application set from the phone

Details — to view additional information about the application

Update version — to check if a new version of the application is available

for download from Web (network service)

App. access — to restrict the application from accessing the network.

Different categories are shown. Select in each category, if available, one

of the following permissions: Ask every time to set the phone to always

ask for network access, Ask first time only to set the phone to ask for

network access only on the first attempt, Always allowed to allow the

network access, or Not allowed to not allow the network access.

Web page — to provide further information or additional data for the

application from an Internet page. This feature must be supported by the

network. It is only shown if an Internet address has been provided with

the application.

A p p l i c a t i o n s

Download an application

Your phone supports J2ME Java applications. Make sure that the

application is compatible with your phone before downloading it.

Important: Only install and use applications and other software

from sources that offer adequate security and protection against

harmful software.

You can download new Java applications in different ways.

Select Menu > Applications > Options > Downloads > App. downloads.

The list of available bookmarks is shown. Select Morebookmarks to access

the list of bookmarks in the Web menu. Select the appropriate bookmark

to connect to the desired page. For the availability of different services,

pricing, and tariffs, contact your service provider.

Select Menu > Web > Downloads. Download an appropriate application

or game. See “Download files”, p. 70.

Use the game download function. See “Game downloads”, p. 62.

Your device may have some bookmarks loaded for sites not affiliated with

Nokia. Nokia does not warrant or endorse these sites. If you choose to

access them, you should take the same precautions, for security or

content, as you would with any Internet site.

W e b

13. Web

You can access various mobile Internet services with your

phone browser.

Important: Use only services that you trust and that offer

adequate security and protection against harmful software.

Check the availability of these services, pricing, tariffs, and instructions

with your service provider.

With the phone browser you can view the services that use wireless

markup language (WML) or extensible hypertext markup language

(XHTML) on their pages. Appearance may vary due to screen size. You may

not be able to view all details of the Internet pages.

■ Set up browsing

You may receive the configuration settings required for browsing as a

configuration message from the network operator or service provider that

offers the service that you want to use. See “Configuration settings

service”, p. xii. You can also enter all the configuration settings manually.

See “Configuration”, p. 51.

■ Connect to a service

First, verify that the correct configuration settings of the service that you

want to use are activated.

W e b

1. To select the settings for connecting to the service, select Menu >

Web > Settings > Configuration settings.

2. Select Configuration. Only the configurations that support browsing

service are shown. Select a service provider, Default, or Personal

config. for browsing. See “Set up browsing”, p. 65.

Select Account and a browsing service account contained in the active

configuration settings.

Secondly, make a connection to the service in one of the following ways:

•

Select Menu > Web > Home; or in the standby mode, press and

hold 0.

•

To select a bookmark of the service, select Menu > Web > Bookmarks.

To select the last URL, select Menu > Web > Last web address.

To enter the address of the service, select Menu > Web > Go to

address, enter the address of the service, and select OK.

■ Browse pages

After you make a connection to the service, you can start browsing its

pages. The function of the phone keys may vary in different services.

Follow the text guides on the phone display. For more information,

contact your service provider.

W e b

If packet data is selected as the data bearer,

is shown on the top left of

the display during browsing. If you receive a call or a text message, or

make a call during a packet data connection, is shown on the top right

of the display to indicate that the packet data connection is suspended

(on hold). After a call the phone tries to reconnect the packet data

connection.

Browse with phone keys

Use the navigation keys to browse through the page.

To select a highlighted item, press the call key, or select Select.

To enter letters and numbers, press the 0 to 9 keys. To enter special

characters, press *.

Options while browsing

Shortcuts, Home, Add bookmark, Bookmarks, Page options, History,

Downloads, Other options, Save to folder, Reload, and Quit may be

available. The service provider may also offer other options.

Direct calling

The browser may support functions that you can access while browsing.

You can make a phone call, send DTMF tones while a voice call is in

progress, and save a name and a phone number from a page.

W e b

■ Appearance settings

While browsing, select Options > Other options > Appear. settings; or in

the standby mode, select Menu > Web > Settings > Appearance settings

and from the following options:

Text wrapping > On — to set the text to continue on the next line on the

display. If you select Off, the text is abbreviated.

Font size > Extra small, Small, or Medium — to set the font size

Show images > No — to hide pictures on the page. This can speed up the

browsing of pages that contain a lot of pictures.

Alerts > Alert for unsecure connection > Yes — to set the phone to alert

when an encrypted connection changes to unencrypted during browsing.

Alerts > Alert for unsecure items > Yes — to set the phone to alert when

an encrypted page contains an unsecure item. These alerts do not

guarantee a secure connection. For more information, see “Browser

security”, p. 73.

Character encoding > Content encoding — to select the encoding for the

browser page content

Character encoding > Unicode (UTF-8) web addresses > On — to set the

phone to send a URL as a UTF-8 encoding. You may need this setting when

you access a Web page created in a foreign language.

Screen Size > Full or Small — to set the screen size

W e b

■ Cookies

A cookie is data that a site saves in the cache memory of your phone.

Cookies are saved until you clear the cache memory. See “Cache memory”,

p. 72.

While browsing, select Options > Other options > Security > Cookie

settings; or in the standby mode, select Menu > Web > Settings >

Security settings > Cookies. To allow or prevent the phone from receiving

cookies, select Allow or Reject.

■ Scripts over secure connection

You can select whether to allow the running of scripts from a secure page.

The phone supports WML scripts.

1. While browsing, select Options > Other options > Security > Script

settings; or in the standby mode, select Menu > Web > Settings >

Security settings > Scripts over secure connection.

2. To allow the scripts, select Allow.

■ Bookmarks

You can save page addresses as bookmarks in the phone memory.

1. While browsing, select Options > Bookmarks; or in the standby mode,

select Menu > Web > Bookmarks.

2. Scroll to a bookmark, and select it; or press the call key to make a

connection to the page associated with the bookmark.

W e b

3. Select Options to view, edit, delete, or send the bookmark; create a

new bookmark; or save the bookmark to a folder.

Your device may have some bookmarks loaded for sites not affiliated with

Nokia. Nokia does not warrant or endorse these sites. If you choose to

access them, you should take the same precautions, for security or

content, as you would with any Internet site.

Receive a bookmark

When you have received a bookmark that is sent as a bookmark,

1 bookmark received is displayed. To save the bookmark, select Show >

Save. To view or delete the bookmark, select Options > View or Delete. To

discard the bookmark directly after you have received the bookmark,

select Exit > OK.

■ Download files

To download more tones, images, games, or applications to your phone

(network service), select Menu > Web > Downloads > Tone downloads,

Graphic downloads, Game downloads, Theme downloads, or App.

downloads.

Important: Only install and use applications and other software

from sources that offer adequate security and protection against

harmful software.

To save all downloaded files automatically in the appropriate folders in

Gallery or in Applications, select Menu > Web > Settings > Downloading

settings > Automatic saving > On.

W e b

■ Service inbox

The phone is able to receive service messages (pushed messages) sent by

your service provider (network service). Service messages are notifications

(for example, news headlines), and they may contain a text message or an

address of a service.

To access the Service inbox in the standby mode, when you have received

a service message, select Show. If you select Exit, the message is moved

to the Service inbox. To access the Service inbox later, select Menu >

Web > Service inbox.

To access the Service inbox while browsing, select Options > Other

options > Service inbox. Scroll to the message you want, and to activate

the browser and download the marked content, select Retrieve. To display

detailed information on the service notification or to delete the message,

select Options > Details or Delete.

Service inbox settings

Select Menu > Web > Settings > Service inbox settings.

To set whether you want to receive service message, select Service

messages > On or Off.

To set the phone to receive service messages only from content authors

approved by the service provider, select Message filter > On. To view the

list of the approved content authors, select Trusted channels.

W e b

To set the phone to automatically activate the browser from the standby

mode when the phone has received a service message, select Automatic

connection > On. If you select Off, the phone activates the browser only

after you select Retrieve when the phone has received a service message.

■ Cache memory

A cache is a memory location that is used to store data temporarily. If you

have tried to access or have accessed confidential information requiring

passwords, empty the cache after each use. The information or services

you have accessed are stored in the cache.

To empty the cache, while browsing, select Options > Other options >

Clear the cache; in the standby mode, select Menu > Web > Clear the

cache.

■ Positioning information

The network may send you a location request. You can ensure that the

network delivers location information of your phone only if you approve it

(network service). Contact your network operator or service provider to

subscribe and to agree upon the delivery of location information.

To accept or reject the location request, select Accept or Reject. If you

miss the request, the phone automatically accepts or rejects it according

to what you have agreed with your network operator or service provider.

The phone displays 1 missed position request. To view the missed location

request, select Show.

W e b

To view the information on the 10 most recent privacy notifications and

requests or to delete them, select Menu > Web > Positioning > Position

log > Open folder or Delete all.

■ Browser security

Security features may be required for some services, such as online

banking or shopping. For such connections you need security certificates

and possibly a security module, which may be available on your SIM card.

For more information, contact your service provider.

Security module

The security module improves security services for applications requiring

a browser connection, and allows you to use a digital signature. The

security module may contain certificates as well as private and public

keys. The certificates are saved in the security module by the service

provider.

Select Menu > Web > Settings > Security settings > Security module

settings and from the following options:

Security module details — to show the security module title, status,

manufacturer, and serial number

Module PIN request — to set the phone to ask for the module PIN when

using services provided by the security module. Enter the code, and select

On. To disable the module PIN request, select Off.

W e b

Change module PIN — to change the module PIN, if allowed by the

security module. Enter the current module PIN code, then enter the new

code twice.

Change signing PIN — to change the signing PIN code for the digital

signature. Select the signing PIN you want to change. Enter the current

PIN code, then enter the new code twice.

See also “Access codes”, p. xi.

Certificates

Important: Even if the use of certificates makes the risks involved

in remote connections and software installation considerably

smaller, they must be used correctly in order to benefit from

increased security. The existence of a certificate does not offer

any protection by itself; the certificate manager must contain

correct, authentic, or trusted certificates for increased security to

be available. Certificates have a restricted lifetime. If Expired

certificate or Certificate not valid yet is shown even if the

certificate should be valid, check that the current date and time

in your device are correct.

Before changing any certificate settings, you must make sure that you

really trust the owner of the certificate and that the certificate really

belongs to the listed owner.

W e b

There are three kinds of certificates: server certificates, authority

certificates, and user certificates. You may receive these certificates from

your service provider. Authority certificates and user certificates may also

be saved in the security module by the service provider.

To view the list of the authority or user certificates downloaded into your

phone, select Menu > Web > Settings > Security settings > Authority

certificates or User certificates.

The security indicator

is displayed during a connection, if the data

transmission between the phone and the content server is encrypted.

The security icon does not indicate that the data transmission between

the gateway and the content server (or place where the requested

resource is stored) is secure. The service provider secures the data

transmission between the gateway and the content server.

Digital signature

You can make digital signatures with your phone if your SIM card has a

security module. Using the digital signature is similar to signing your

name to a paper bill, contract, or other document.

To make a digital signature, select a link on a page, for example, the title

of the book you want to buy and its price. The text to sign, which may

include the amount and date, is shown.

Check that the header text is Read and that the digital signature icon

is shown.

W e b

If the digital signature icon does not appear, there is a security breach,

and you should not enter any personal data such as your signing PIN.

To sign the text, read all of the text first, and select Sign.

The text may not fit within a single screen. Therefore, make sure to scroll

through and read all of the text before signing.

Select the user certificate you want to use. Enter the signing PIN (see

“Access codes”, p. xi), and select OK. The digital signature icon disappears,

and the service may display a confirmation of your purchase.

S I M s e r v i c e s

14. SIM services

Your SIM card may provide additional services that you can access. This

menu is shown only if it is supported by your SIM card. The name and

contents of the menu depend on the SIM card.

For availability and information on using SIM card services, contact your

SIM card vendor. This may be the service provider, network operator, or

other vendor.

To set the phone to show you the confirmation messages sent between

your phone and the network when you are using the SIM services, select

Menu > Settings > Phone > Confirm SIM service actions > Yes.

Accessing these services may involve sending messages or making a

phone call for which you may be charged.

B a t t e r y i n f o r m a t i o n

15. Battery information

■ Charging and discharging

Your device is powered by a rechargeable battery. The full performance of a new

battery is achieved only after two or three complete charge and discharge cycles.

The battery can be charged and discharged hundreds of times, but it will eventually

wear out. When the talk and standby times are noticeably shorter than normal,

replace the battery. Use only Nokia approved batteries, and recharge your battery

only with Nokia approved chargers designated for this device.

If a replacement battery is being used for the first time or if the battery has not

been used for a prolonged period, it may be necessary to connect the charger then

disconnect and reconnect it to begin charging the battery.

Unplug the charger from the electrical plug and the device when not in use. Do not

leave fully charged battery connected to a charger, since overcharging may shorten

its lifetime. If left unused, a fully charged battery will lose its charge over time.

If the battery is completely discharged, it may take a few minutes before the

charging indicator appears on the display or before any calls can be made.

Use the battery only for its intended purpose. Never use any charger or battery that

is damaged.

Do not short-circuit the battery. Accidental short-circuiting can occur when a

metallic object such as a coin, clip, or pen causes direct connection of the positive

(+) and negative (-) terminals of the battery. (These look like metal strips on the

battery.) This might happen, for example, when you carry a spare battery in your

pocket or purse. Short-circuiting the terminals may damage the battery or the

connecting object.

B a t t e r y i n f o r m a t i o n

Leaving the battery in hot or cold places, such as in a closed car in summer or

winter conditions, will reduce the capacity and lifetime of the battery. Always try

to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot or

cold battery may not work temporarily, even when the battery is fully charged.

Battery performance is particularly limited in temperatures well below freezing.

Do not dispose of batteries in a fire as they may explode. Batteries may also

explode if damaged. Dispose of batteries according to local regulations. Please

recycle when possible. Do not dispose as household waste.

■ Nokia battery authentication guidelines

Always use original Nokia batteries for your safety. To check that you are getting an

original Nokia battery, purchase it from an authorized Nokia dealer, look for the

Nokia Original Enhancements logo on the packaging and inspect the hologram

label using the following steps:

Successful completion of the four steps is not a total assurance of the authenticity

of the battery. If you have any reason to believe that your battery is not an

authentic original Nokia battery, you should refrain from using it, and take it to the

nearest authorized Nokia service point or dealer for assistance. Your authorized

Nokia service point or dealer will inspect the battery for authenticity. If

authenticity cannot be verified, return the battery to the place of purchase.

B a t t e r y i n f o r m a t i o n

Authenticate hologram

1. When looking at the hologram on the label,

you should see the Nokia connecting hands

symbol from one angle and the Nokia Original

Enhancements logo when looking from another

angle.

2. When you angle the hologram left, right, down,

and up, you should see 1, 2, 3, and 4 dots on each

side respectively.

3. Scratch the side of the label to reveal a

20-digit code, for example,

12345678919876543210. Turn the battery so

that the numbers are facing upwards. The

20-digit code reads starting from the number at

the top row followed by the bottom row.

4. Confirm that the 20-digit code is valid by

following the instructions at

www.nokiaoriginals.com/check.

To create a text message enter the 20-digit code,

for example, 12345678919876543210, and send

to +44 7786 200276.

B a t t e r y i n f o r m a t i o n

To create a text message,

•

For countries in Asia Pacific, excluding India: Enter the 20-digit code, for

example, 12345678919876543210, and send to +61 427151515.

•

For India only: Enter Battery followed by the 20-digit battery code, for example,

Battery 12345678919876543210, and send to 5555.

National and international operator charges will apply.

You should receive a message indicating whether the code can be authenticated.

If you need assistance confirming the battery code, contact your local Nokia Care

Centres listed at www.nokia -asia.com/carecentrelocator.

What if your battery is not authentic?

If you cannot confirm that your Nokia battery with the hologram on the label is an

authentic Nokia battery, please do not use the battery. Take it to the nearest

authorized Nokia service point or dealer for assistance. The use of a battery that is

not approved by the manufacturer may be dangerous and may result in poor

performance and damage to your device and its enhancements. It may also

invalidate any approval or warranty applying to the device.

To find out more about original Nokia batteries, visit www.nokiaoriginals.com/

batter y .

G e n u i n e E n h a n c e m e n t s

16. Genuine Enhancements

A new extensive range of enhancements is available for your

phone. Select the enhancements which accommodate your

specific communication needs.

Some of the enhancements are described in detail below.

For availability of the enhancements, please check with your

local dealer. A few practical rules for enhancements operation:

•

Keep the enhancements out of small children’s reach.

When you disconnect the power cord of any accessory, grasp and pull the plug,

not the cord.

•

Check regularly that all mobile phone equipment in a vehicle is mounted and

operating properly.

Use only batteries, chargers and enhancements approved by the phone

manufacturer. The use of any other types may invalidate any approval or

warranty applying to the phone, and may be dangerous.

■ Power

Type

Tech

Talktime*

Standby*

BL-5B

Li-ion

Up to 2.5 to 3.5 hrs

Up to 120 to 400 hrs

* Variation in operation times may occur depending on SIM card, network and

usage settings, usage style and environments. Use of FM radio and integrated

hands-free will affect talktime and standby.

G e n u i n e E n h a n c e m e n t s

Standard Charger (ACP-7)

Small, lightweight and durable charger ACP-7 provides and easy and

convenient way to charge the phone. It is easy to connect to phone or

desktop stand.

Note: The plug types vary according to different markets.

Travel Charger (ACP-12)

Small, lightweight travel charger with multi voltage (100 - 240V)

switcher technology. Provides easy and convenient way to charge the

phone.

Note: The plug types vary according to different markets.

G e n u i n e E n h a n c e m e n t s

■ Audio

Nokia Headset HDC-5

For easy and simple operation this headset is provided with a remote

control.

C a r e a n d m a i n t e n a n c e

17. Care and maintenance

Your device is a product of superior design and craftsmanship and should be

treated with care. The suggestions below will help you protect your warranty

coverage.

•

Keep the device dry. Precipitation, humidity, and all types of liquids or moisture

can contain minerals that will corrode electronic circuits. If your device does

get wet, remove the battery, and allow the device to dry completely before

replacing it.

•

Do not use or store the device in dusty, dirty areas. Its moving parts and

electronic components can be damaged.

Do not store the device in hot areas. High temperatures can shorten the life of

electronic devices, damage batteries, and warp or melt certain plastics.

Do not store the device in cold areas. When the device returns to its normal

temperature, moisture can form inside the device and damage electronic

circuit boards.

•

Do not attempt to open the device other than as instructed in this guide.

Do not drop, knock, or shake the device. Rough handling can break internal

circuit boards and fine mechanics.

•

Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the

device.

Do not paint the device. Paint can clog the moving parts and prevent proper

operation.

Use a soft, clean, dry cloth to clean any lenses (such as camera, proximity

sensor, and light sensor lenses).

C a r e a n d m a i n t e n a n c e

•

Use only the supplied or an approved replacement antenna. Unauthorized

antennas, modifications, or attachments could damage the device and may

violate regulations governing radio devices.

•

Use chargers indoors.

Always create a backup of data you want to keep (such as contacts and

calendar notes) before sending your device to a service facility.

All of the above suggestions apply equally to your device, battery, charger, or any

enhancement. If any device is not working properly, take it to the nearest

authorized service facility for service.

A d d i t i o n a l s a f e t y i n f o r m a t i o n

18. Additional safety information

Your device and its enhancements may contain small parts. Keep them out of the

reach of small children.

■ Operating environment

Remember to follow any special regulations in force in any area, and always switch

off your device when its use is prohibited or when it may cause interference or

danger. Use the device only in its normal operating positions. This device meets RF

exposure guidelines when used either in the normal use position against the ear or

when positioned at least 2.2 centimeters (7/8 inches) away from the body. When a

carry case, belt clip or holder is used for body-worn operation, it should not contain

metal and should position the device the above-stated distance from your body.

In order to transmit data files or messages, this device requires a good quality

connection to the network. In some cases, transmission of data files or messages

may be delayed until such a connection is available. Ensure the above separation

distance instructions are followed until the transmission is completed.

Parts of the device are magnetic. Metallic materials may be attracted to the device,

and persons with a hearing aid should not hold the device to the ear with the

hearing aid. Do not place credit cards or other magnetic storage media near the

device, because information stored on them may be erased.

■ Medical devices

Operation of any radio transmitting equipment, including wireless phones, may

interfere with the functionality of inadequately protected medical devices. Consult

a physician or the manufacturer of the medical device to determine if they are

A d d i t i o n a l s a f e t y i n f o r m a t i o n

adequately shielded from external RF energy or if you have any questions. Switch

off your device in health care facilities when any regulations posted in these areas

instruct you to do so. Hospitals or health care facilities may be using equipment

that could be sensitive to external RF energy.

Pacemakers

Pacemaker manufacturers recommend that a minimum separation of

15.3 centimeters (6 inches) be maintained between a wireless phone and a

pacemaker to avoid potential interference with the pacemaker. These

recommendations are consistent with the independent research by and

recommendations of Wireless Technology Research. Persons with pacemakers

should do the following:

•

Always keep the device more than 15.3 centimeters (6 inches) from the

pacemaker.

•

Not carry the device in a breast pocket.

Hold the device to the ear opposite the pacemaker to minimize the potential for

interference.

If you suspect interference, switch off your device, and move the device away.

Hearing aids

Some digital wireless devices may interfere with some hearing aids. If interference

occurs, consult your service provider.

■ Vehicles

RF signals may affect improperly installed or inadequately shielded electronic

systems in motor vehicles such as electronic fuel injection systems, electronic

antiskid (antilock) braking systems, electronic speed control systems, and air bag

A d d i t i o n a l s a f e t y i n f o r m a t i o n

systems. For more information, check with the manufacturer, or its representative,

of your vehicle or any equipment that has been added.

Only qualified personnel should service the device, or install the device in a vehicle.

Faulty installation or service may be dangerous and may invalidate any warranty

that may apply to the device. Check regularly that all wireless device equipment in

your vehicle is mounted and operating properly. Do not store or carry flammable

liquids, gases, or explosive materials in the same compartment as the device, its

parts, or enhancements. For vehicles equipped with an air bag, remember that air

bags inflate with great force. Do not place objects, including installed or portable

wireless equipment in the area over the air bag or in the air bag deployment area.

If in-vehicle wireless equipment is improperly installed, and the air bag inflates,

serious injury could result.

Using your device while flying in aircraft is prohibited. Switch off your device

before boarding an aircraft. The use of wireless teledevices in an aircraft may be

dangerous to the operation of the aircraft, disrupt the wireless telephone network,

and may be illegal.

■ Potentially explosive environments

Switch off your device when in any area with a potentially explosive atmosphere

and obey all signs and instructions. Potentially explosive atmospheres include

areas where you would normally be advised to turn off your vehicle engine. Sparks

in such areas could cause an explosion or fire resulting in bodily injury or even

death. Switch off the device at refueling points such as near gas pumps at service

stations. Observe restrictions on the use of radio equipment in fuel depots, storage,

and distribution areas; chemical plants; or where blasting operations are in

progress. Areas with a potentially explosive atmosphere are often, but not always,

clearly marked. They include below deck on boats, chemical transfer or storage

A d d i t i o n a l s a f e t y i n f o r m a t i o n

facilities, vehicles using liquefied petroleum gas (such as propane or butane),

and areas where the air contains chemicals or particles such as grain, dust, or

metal powders.

■ Emergency calls

Important: Wireless phones, including this device, operate using radio

signals, wireless networks, landline networks, and user-programmed

functions. Because of this, connections in all conditions cannot be

guaranteed. You should never rely solely on any wireless device for

essential communications like medical emergencies.

To make an emergency call:

1. If the device is not on, switch it on. Check for adequate signal strength.

Some networks may require that a valid SIM card is properly inserted in the

device.

2. Press the end key as many times as needed to clear the display and ready the

device for calls.

3. Enter the official emergency number for your present location. Emergency

numbers vary by location.

4. Press the call key.

If certain features are in use, you may first need to turn those features off before

you can make an emergency call. If the device is in the offline or flight mode, you

must change the profile to activate the phone function before you can make an

emergency call. Consult this guide or your service provider for more information.

When making an emergency call, give all the necessary information as accurately

as possible. Your wireless device may be the only means of communication at the

scene of an accident. Do not end the call until given permission to do so.

A d d i t i o n a l s a f e t y i n f o r m a t i o n

■ Certification information (SAR)

THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO

WAVES

Your mobile device is a radio transmitter and receiver. It is designed and

manufactured not to exceed the limits for exposure to radio frequency (RF)

recommended by international guidelines (ICNIRP). These limits are part of

comprehensive guidelines and establish permitted levels of RF energy for the

general population. The guidelines were developed by independent scientific

organizations through periodic and thorough evaluation of scientific studies.

The guidelines include a substantial safety margin designed to assure the safety

of all persons, regardless of age and health.

The exposure standard for mobile devices employs a unit of measurement known as

the Specific Absorption Rate, or SAR. The SAR limit stated in the international

guidelines is 2.0 watts/kilogram (W/kg)*. Tests for SAR are conducted using

standard operating positions with the device transmitting at its highest certified

power level in all tested frequency bands. Although the SAR is determined at the

highest certified power level, the actual SAR of the device while operating can be

well below the maximum value. This is because the device is designed to operate at

multiple power levels so as to use only the power required to reach the network. In

general, the closer you are to a base station, the lower the power output of the

device.

The highest SAR value for this device when tested for use at the ear is 0.77 W/kg.

SAR values may vary depending on national reporting and testing requirements

and the network band. Use of device accessories and enhancements may result in

different SAR values. Additional SAR information may be provided under product

information at www.nokia -asia.com.

A d d i t i o n a l s a f e t y i n f o r m a t i o n

* The SAR limit for mobile devices used by the public is 2.0 W/kg averaged over

10 grams of body tissue. The guidelines incorporate a substantial margin of safety

to give additional protection for the public and to account for any variations in

measurements. SAR values may vary depending on national reporting

requirements and the network band. For SAR information in other regions,

please look under product information at www.nokia.com.

Index

Business cards 39

About your device viii

Access codes xi

Add contacts to subscribed names 41

Alarm clock 56

Cache memory 72

Calculator 59

Answer or reject a call 12

Appearance settings 68

Applications 62

Calendar 57

Call 47

Call functions 11

Call register 35

Call waiting 12

Certificates 74

Audio 84

Certification information (SAR) 91

Charge the battery 3

Charging 78

Barring password xii

Battery 78, 82

Battery information 78

type 82

Collection 63

Configuration 51

Configuration settings service xii

Connect to a service 65

Connectivity 50

Contacts 36

Bookmarks 69

Browse pages 66

Browse with phone keys 67

Browser security 73

browser security

Cookies 69

Copy contactse 38

Countdown timer 60

security module for WAP

applications 73

G a me settings 62

Games 62

Delete contacts or contact details 38

Delete e-mail messages 29

Delete messages 30

General information xi

Genuine Enhancements 82

Get started 1

Digital signature 75

Display 7, 46

Groups 42

Download an application 64

Download content and applications xiii

Download e-mail 28

Inbox and other folders 29

Indicators 9

Download files 70

Info messages 30

Info, service, and my numbers 43

Install the SIM card and battery 1

Edit contact details 38

E-mail 33

E-mail application 27

Emergency calls 90

Enhancements x, 50

Keypad lock (keyguard) 10

Keys and parts 5

Flash messages 26

Folders 25

Launch a game 62

Launch an application 63

Lights 45

For your safety vii

Gallery 55

Maintenance 85

Game downloads 62

Make a calendar note 57

Make a call 11

Memory full 24

Message counter 34

Message settings 31

Messages 18

Multimedia 31

Multimedia messages (MMS) 21

My presence 39

My shortcuts 45

Other settings 34

Overview of functions xi

Navigate the menus 17

Network services ix

Personal shortcut list 7

Nokia battery authentication guidelines Phone 49

PIN codes xi

Plug and play service 4

Nokia Headset HDC-5 84

Nokia support and contact information Positioning information 72

Power saving 8

Predictive text input 15

Profiles 44

Normal operating position 4

Note alarm 57

Notes 58

PUK codes xii

Open the fold 1

Read and reply to a message 20, 23

Read and reply to e-mail 28

Receive a bookmark 70

Options during a call 13

Options while browsing 67

Organizer 56

Receive a flash message 26

Recent calls lists 35

Restore factory settings 54

Other application options 63

Save names and phone numbers 36

Save numbers, items, or an image 36

Scripts over secure connection 69

Search for a contact 36

Security 53

To-do list 58

Tones 45

Security code xi

Traditional text input 15

Security module 73

Security settings

Digital signature 75

Service commands 30

Service inbox 71

Unsubscribe a contact 42

Service inbox settings 71

Set up browsing 65

Settings 14, 42, 44

Shared memory x

Shortcuts in the standby mode 8

SIM services 77

View subscribed names 41

Voice messages 29

Wallet

Speed dialing 11

Speed dials 42

Standby mode 7

Stop the alarm 56

Stopwatch 59

Subscribed names 40

Switch the phone on and off 3

signing documents via WAP 75

WAP services

security module in SIM 73

Signing documents 75

Web 65

Write a flash message 26

Write and send a message 19, 22

Write and send an e-mail 27

Write compound words 15

Write text 14

Templates 21

Text and SMS e-mail 31

Text messages (SMS) 18

Themes 44

Time and date 47

Your phone 5

TRENDnet TFM PCIV92 User Manual
Technivorm Coffeemaker KBT 741 User Manual
Tascam HD R1 User Manual
Sony DREAM MACHINE ICF C275RC User Manual
Seagate BARRACUDA ST3500630AS User Manual
Samsung SGH a127 User Manual
Samsung SCH A530 User Manual
Sakar ICONCEPTS M10617 MB User Manual
Philips Computer Drive SA5MXX User Manual
Nokia GOLD ARTE 8800 User Manual