Nokia 7610 User Manual

User Guide  
Nokia 7160  
User Guide  
The wireless phone described in this guide is approved for use in TDMA  
and AMPS networks.  
Legal information  
Part No. 9353209, Issue No. 2.1  
© 2000–2001 Nokia Inc. All rights reserved.  
Printed in Canada 04/01  
Nokia, Nokia Connecting People and the Original Accessories logos are  
trademarks of Nokia Corporation and/or its affiliates.  
US Patent No 5818437 and other pending patents.  
T9 text input software Copyright (C) 1999. Tegic Communications, Inc.  
All rights reserved.  
Includes RSA BSAFE cryptographic or security protocol software  
from RSA Security.  
The information contained in this User Guide was written for Nokia phone  
NSW-5. The right to make changes and improvements to any of the  
products described in this guide without prior notice is reserved.  
Export Controls  
This product contains commodities, technology or software exported from  
the United States in accordance with the Export Administration  
regulations. Diversion contrary to U.S. law is prohibited.  
FCC/Industry Canada Notice  
Your phone may cause TV or radio interference (for example, when using  
a telephone in close proximity to receiving equipment). The FCC or Industry  
Canada can require you to stop using your telephone if such interference  
cannot be eliminated. If you require assistance, contact your local service  
facility.  
This device complies with part 15 of the FCC rules. Operation is subject to  
the condition that this device does not cause harmful interference.  
Contents  
[ i ]  
[ ii ]  
[ iii ]  
[ iv ]  
[ v ]  
[ vi ]  
[ vii ]  
• For your safety  
Read these simple guidelines before using your phone. Failure to  
comply with these guidelines may be dangerous or illegal.  
Road Safety Comes First  
Don’t use a hand-held phone while driving; park the vehicle first.  
Switch Off In Hospitals  
Follow any regulations or rules. Switch phone off near medical  
equipment.  
Switch Off While On Aircraft  
Wireless phones can cause interference. Using them on aircraft is  
illegal.  
Switch Off When Refueling  
Don’t use phone at a refueling point. Don’t use near fuel or  
chemicals.  
Switch Off Near Blasting  
Do not use the phone where blasting is in progress. Observe  
restrictions, and follow any regulations or rules.  
Interference  
All wireless phones may get interference which could affect  
performance.  
Use Sensibly  
Use only in the normal position (to ear). Don’t touch the antenna  
unnecessarily.  
Qualified Service  
Only qualified service personnel must install or repair equipment.  
Accessories and Batteries  
Use only approved accessories and batteries. Do not connect  
incompatible products.  
[ 1 ]  
   
Connecting To Other Devices  
When connecting to any other device, read its user’s guide for  
detailed safety instructions. Do not connect incompatible products.  
Remember to make backup copies of all important data.  
Making Calls  
Ensure the phone is switched on and in service. Enter the phone  
number, including the area code, then press  
press . To answer a call press  
. To end a call  
.
Emergency Calls  
Ensure the phone is switched on and in service. If the word “Clear”  
appears on the display above the key, press and hold Clear  
to clear the display. Enter the emergency number, then press  
. Give your location. Do not end the call until told to do so.  
Infrared Precautions  
Do not point the IR beam at anyone’s eyes or allow it to interfere  
with other IR devices.  
• Your phone’s label  
The label found on the back of your phone (under the battery) contains  
important information about your phone, including the model and serial  
numbers. You will be required to provide information from this label, in  
the event you call Nokia Customer Service (or call your service provider).  
Therefore, please do not remove or deface this label.  
[ 2 ]  
   
Welcome  
1. Welcome  
Congratulations on your purchase of a Nokia 7160 mobile phone. You are  
now on your way to using a new and exciting tool.  
However, before you use your phone, read this chapter. It provides  
information that you need to know about how to use this manual and  
how to contact Nokia.  
• Network services  
Call Forwarding and Call Waiting are two examples of features called  
Network Services. Network Services are special services provided by your  
wireless service provider, and are described later in this guide. Before you  
can take advantage of any of these Network Services, you must subscribe  
to these service(s) from your wireless service provider and obtain  
instructions from them for their use.  
Note: Some networks may not support all language-dependent characters.  
Updates  
The latest version of this Owner’s Manual may be available on Nokia’s  
World Wide Web site at http://www.NokiaUSA.com.  
• How to contact Nokia  
Nokia Contact Center  
Customer Care, Canada  
Nokia Customer Care Center, USA  
Customer Care, Canada  
7725 Woodland Center Boulevard, Suite #150 Nokia Products Ltd.  
Tampa, Florida 33614  
Tel: 1-888-NOKIA2U (1-888-665-4228)  
Fax: 1-813-249-9619  
For the hearing-impaired only (TTY):  
1-800-24NOKIA (1-800-246-6542)  
575 Westney Rd. South  
Ajax, Ontario L1S 4N7  
Tel: 1-888-22NOKIA  
(1-888-226-6542)  
Fax: 1-905-427-1070  
[ 3 ]  
             
• Contacting your service provider  
Some service providers have pre-programmed their customer support  
number into the phone. Pressing and holding the key (or the key  
that your service provider instructed you to use) for 2 seconds will  
automatically dial their customer support number. This feature can be  
helpful if you’re having difficulties dialing a number, especially when  
traveling outside your home area.  
If your service provider deems your problem to be Nokia-related, they will  
direct you to contact Nokia Customer Service.  
Note: This one-key feature might not be available on all systems.  
Contact your service provider for availability.  
[ 4 ]  
   
Before you begin  
2. Before you begin  
• Attach your battery  
Prior to using your phone, the battery must  
be installed and charged. Grasp the phone  
near the display (rather than on the slide  
mechanism). Placethe batteryin the grooves  
on the back of your phone. Then slide the  
battery upward until it clicks.  
Note: Useonlythosebatteriesapprovedby  
the phone manufacturer. See “Using  
• Charge your battery  
1. With your phone on or off, connect the  
lead from the charger to the bottom of the  
phone.  
2. Connect the charger to an AC wall outlet.  
The battery indicator bar starts to scroll  
after a few seconds.  
3. Disconnect the charger from the phone  
and AC outlet when the battery is fully  
charged.  
Note: When the indicator bar stops scrolling, the battery will accept a  
"trickle charge" for an additional 2 hours until it is 100% fully  
charged (except BMS-2V). See “Charging Times” on page 96 for  
more information.  
Important battery information:  
Recharge your battery only with the chargers approved by the  
manufacturer.  
The phone can be used while charging if the phone is switched on.  
[ 5 ]  
           
If the battery is totally empty, it may take a few minutes before you  
can make and receive calls, and before the charging indication appears  
on the display. For more information about specific chargers, see  
pages 98-100.  
If the phone is switched on when charging is completed, Battery full  
is displayed on the screen momentarily.  
Unlike NiMH batteries, the BLS-2S Li-Ion battery does not need to be  
fully discharged before recharging.  
Charging time depends on the charger and battery used. For example,  
the charging time for the BLS-2S battery with the ACP-8U charger  
takes about 2 hours. See page 96 for charging times.  
• Removing the battery  
It is necessary to remove the existing battery if you purchase (and want  
to use) a different battery model, or have purchased a spare battery.  
To remove the battery:  
1. Make sure the phone has been turned off for 10 seconds.  
2. While holding the phone by the display (and not on the slide mechanism),  
press and hold the battery release button.  
3. Slide the battery downward and away from the antenna.  
4. Remove the battery from the grooved back of the phone.  
Prolonging battery life  
A NiMH battery lasts longer and performs better if you fully discharge it  
from time to time. To discharge your battery:  
Leave your phone switched on until the battery is drained. Ignore any  
messages to recharge your battery.  
Use the battery discharge feature of any approved accessory available  
for your phone.  
Note: Do not attempt to discharge the battery by any means other than  
those just described.  
[ 6 ]  
     
About your phone  
3. About your phone  
• Diagrams  
Fixed antenna  
Front  
Power key  
Phone Display  
Selection keys  
Earpiece  
TM  
Navi roller  
Microphone  
Sliding key cover  
Back  
Bottom  
Headset, DLR-3P  
External antenna  
jack  
(utilized by  
Car kit)  
Infrared port  
AC power  
[ 7 ]  
         
• Switch the phone on (or off)  
To switch the phone on or off, press and hold  
for 2 seconds.  
Warning! Do not switch on the phone when wireless phone  
use is prohibited or when it may cause interference or danger.  
As with any other radio transmitting device, do not touch the  
antenna unnecessarily when the phone is switched on. Contact  
with the antenna affects call quality and may cause the phone  
to operate at a higher power level than otherwise needed.  
• About your phone’s display  
Your phone’s display provides several different types of information through  
the use of various display indicators and icons. Most essential indicators  
and icons related to various phone functions are explained later in this  
user’s guide.  
The Start screen  
The Start screen refers to the phone’s display when  
no calls are in progress, and there are currently no  
menu or phone book entries displayed.  
You can easily return to the Start screen from any  
location(otherthananactive call) simply by pressing  
the  
key. However, keep in mind that any text or numbers that you  
were entering at the time will be lost, and your work will not be saved.  
HOME Often times your service provider’s name will appear here.  
Shows the signal strength of the wireless network at your current  
location. The higher the bar, the stronger the signal.  
Shows the battery charge level. The higher the bar, the more power  
in the battery.  
Indicates that you are in a digital network.  
[ 8 ]  
             
About your phone  
Header and scroll bar  
A header line appears at the top of your screen  
when in the phone book or while navigating the  
menus, providing you with a reminder of the  
phone book entry you are working with, or  
functions as a reminder of the menu or  
sub-menu with which you are working.  
Header  
Scroll bar  
A scroll bar is displayed on the right edge of your screen, giving you a  
visual representation of your relative position while navigating the menu  
and sub-menu structure. The scroll bar is not visible in the phone book.  
• Indicators and Icons  
The following is a collection of the various other indicators and icons that  
you may see on your phone’s display:  
Icon  
Description  
You have an active call.  
The phone is waiting for you to enter numbers or text.  
You have turned off your phone’s keypad tones, warning tones, message  
alert tones, and set your ringing tone to Silent.  
Keyguard has been activated to help prevent any accidental keypresses.  
You have one or more voice messages waiting.  
You have one or more unread text messages waiting.  
Digital service is available.  
Any characters you enter will be upper-case letters or numbers. Press the  
key to switch letter case.  
[ 9 ]  
     
Icon  
Description  
Any characters you enter will be lower-case letters or numbers. Press the  
key to switch letter case.  
Indicates sentence case. You will not need to switch between upper case and  
lower case for the first word in a sentence. Available when entering calendar  
notes, to-do list events, or writing text messages.  
Also indicates title case. Automatically capitalizes first letter in every word.  
Available when entering names in the phone book.  
Appears when you press and hold the  
key while entering/editing text.  
Only numbers can be entered while in this mode.  
Indicates insert special characters mode. Appears when you press and hold  
the  
key while entering/editing text. Only special characters can be  
entered.  
The alarm clock is set.  
You have a general reminder entered in your calendar (appears only on  
Calendar display).  
You have a reminder in your calendar that it’s someone’s birthday (appears  
only on Calendar display).  
You have a reminder in your calendar to call someone (appears only on  
Calendar display).  
You have a reminder in your calendar of a meeting (appears only on Calendar  
display).  
Indicates an active data or fax call.  
Appears when the DLR-3P data cable is connected to your phone.  
[ 10 ]  
About your phone  
• Using the keys  
The following table contains information on using the various keys found  
on your phone:  
Key:  
Description:  
Power: Press and hold to switch the phone on or off.  
Selection: Press to perform the function indicated by the label  
above the key (on the phone’s display).  
Roller: Roll to scroll through lists or menus. Press to select the  
highlighted item. Used during a call to adjust the earpiece  
volume. See page 12.  
Talk: Press to make a call to name/number shown on the display  
or to answer a call. Press once at the Start screen to enter the list  
of last dialed numbers.  
End: Press to end a call or to silence an incoming call.  
-
Number: Used for entering numbers and letters.  
Tip: Press and hold  
to call your voice mailbox.  
Special characters:  
is used for entering special characters.  
is used to perform special functions (example: changing  
letter case in alpha mode).  
Using the selection keys  
Two selection keys are located below the  
display. Their functions can be identified  
by the text shown above the keys in the  
display.  
For example, pressing the left selection  
key  
when Menu appears above it  
displays the first of many menus.  
Similarly, pressing the right selection key  
above it displays the phone book menu.  
when Names appears  
[ 11 ]  
               
In this manual, the selection keys are referred to by the texts that appear  
above them, and appear in bold (for example, Menu or Names).  
Left selection key  
The left selection key will frequently display one of the most commonly  
used sub-menus when scrolling through the phone’s menu. For example,  
when you access the Messages menu, the left selection key is Inbox. Use  
this shortcut to access the feature displayed, or press the roller to access  
the entire list of sub-menus.  
TM  
• Using the Navi roller  
The NaviTM roller is a multi-function key used to  
navigate through your phone’s menus and  
phone book.  
Roll the roller up or down to scroll through lists  
of names and numbers, or through the phone’s  
menus, submenus and option lists.  
Press once to perform one of the following (depending on what is displayed):  
show details of the highlighted name or number.  
display a sub-menu (same as pressing the Options selection key,  
whether visible or not).  
select the highlighted function or setting.  
automatically select the most frequently used menu or sub-menu  
option.  
Press and hold to make a call to the name or number displayed when the  
sliding cover of your phone is closed.  
Tips:  
Pressing the roller is the same as pressing Select.  
Press the roller when no calls are in progress (or when no menus are  
displayed) to display the Phone book’s Names List. For information  
about customizing the roller’s function, see page 50.  
[ 12 ]  
   
About your phone  
• Using the sliding cover  
The sliding cover protects your phone’s keypad,  
and can be used to answer, end or reject a call.  
(See page 21 for details.)  
To open the sliding cover, slide it down.  
To close the cover, slide it up until it locks into  
place.  
Tip: Closing the sliding cover exits the menu or  
phone book functions and returns you to the  
Start screen.  
Note: If you have locked the keypad of your phone, the keypad is always  
unlocked when you open the sliding cover.  
To close the sliding cover without ending a call:  
1. Before closing the cover, press the Options selection key.  
2. Close the sliding cover.  
To end a call with the sliding cover closed:  
Press the Options selection key (when it appears), scroll to End all  
calls, then press the roller.  
Just in case  
If the plastic part of your phone’s sliding cover accidentally comes off,  
reattach it as described below:  
1. Make sure metal frame of slide is fully  
extended and locked into the open  
position(slide will "click" into place).  
2. Place the right edge of the plastic slide  
cover on the right side of the metal frame  
(depressing the microphone contacts in  
the process).  
[ 13 ]  
       
3. Rotate the plastic slide cover onto the  
metal slide frame. Make sure the middle  
snap is secured properly (turn the phone  
over to check).  
4. Press the left side of the plastic slide cover  
onto the metal slide frame until it snaps  
into place.  
5. Check to confirm that all 3 snaps are  
securely fastened.  
[ 14 ]  
Your phone’s menus  
4. Your phone’s menus  
The phone’s menus allow you to tailor the phone to your needs. Each menu  
can contain several levels of submenus.  
The menus and submenus can be accessed by rolling the roller or using  
the appropriate shortcut number (see page 16).  
Help texts  
A brief help text is available for most menu items. To view the help text,  
scroll to the desired menu function and wait for 10 seconds.  
• Browsing the menus via the roller  
Using the multi-function Navi roller, you can scroll through the various  
menus and sub menus by rolling the roller up or down. To make your  
selection, simply press the roller.  
1. Press Menu.  
2. Use the roller to scroll to the desired main menu.  
3. Press the roller to make your choice (for example, Settings), and to  
view the sub-menu(s).  
Note: If the submenu contains submenus,  
scroll to the desired submenu and  
press the roller to select (for example,  
Call settings).  
4. Scroll to the desired setting option (for  
example, 1-touch dialing) and press the  
roller to select.  
Tips:  
Some of the most frequently used sub-menu options can be found by  
rolling up, in addition to rolling down.  
[ 15 ]  
       
You can return to the previous menu level by pressing Back, or exit  
the menu by pressing Exit (if displayed).  
You can exit the menu by pressing and holding Back (including when  
the slide is closed).  
You can always exit the menu by pressing  
without changing  
the menu settings. Pressing returns you to the Start screen.  
Accessing a menu function by its shortcut  
Most menu items (menus, submenus and setting options) are numbered  
and can be accessed by their shortcut number. The shortcut number is  
shown in the top right corner of the display. For menu shortcut numbers  
1. Press Menu.  
2. Within 3 seconds, enter the first number of the menu function you  
want to access. Repeat until you have entered all of the numbers.  
For example: To set the menu function 1-touch dialing to on, press  
Menu 4-2-3-1 (Settings-Call settings-1-touch dialing-On).  
• List of main menu functions  
1 Messages  
01-1 Inbox  
01-2 Outbox  
1-3 Archive  
1-4 Voice messages  
1-4-1 Listen to voice messages  
1-4-2 Voice mailbox number  
1-5 Erase messages  
1-5-1 All read  
1-5-2 Inbox  
1-5-3 Outbox  
1-5-4 Archive  
1-6 Write message  
1-7 Write e-mail  
[ 16 ]  
     
Your phone’s menus  
2 Call log  
2-1 Missed calls  
2-2 Received calls  
2-3 Dialed calls  
2-4 Clear call lists  
2-4-1 All calls  
2-4-2 Missed calls  
2-4-3 Dialed calls  
2-4-4 Received calls  
2-5 Call timers  
2-5-1 Last call  
2-5-1-1 Current call timer  
2-5-2 All calls  
2-5-3 Life timer  
2-5-4 Clear timers  
3 Profiles  
3-1 Normal  
3-1-1 Select  
3-1-2 Customize  
3-1-2-1 Ringing options  
3-1-2-2 Ringing tone  
3-1-2-3 Ringing volume  
3-1-2-4 Message alert tone  
3-1-2-5 Keypad tones  
3-1-2-6 Warning tones  
3-1-2-7 Accepted caller groups  
3-1-2-8 Vibrating alert (only when vibrating battery is  
attached)  
3-2 Silent  
3-2-1 Select  
3-2-2 Customize (same submenus as Normal profile)  
3-2-3 Rename  
3-3 Meeting (same submenus as Silent profile)  
3-4 Outdoor (same submenus as Silent profile)  
[ 17 ]  
3-5 Pager (same submenus as Silent profile)  
*
3-6 Handsfree  
3-6-1 Customize (same submenus as Normal profile, plus  
Automatic answer and Lights)  
3-7 Headset  
3-7-1 Customize (same submenus as Normal profile, plus  
Automatic answer)  
4 Settings  
4-1 Time settings  
4-1-1 Alarm clock  
4-1-2 Clock  
4-1-2-1 Show (hide) clock  
4-1-2-2 Set the time  
4-1-2-3 Time format  
4-2 Call settings  
4-2-1 Anykey answer  
4-2-2 Automatic redial  
4-2-3 1-touch dialing  
4-2-4 Calling card  
4-3 Phone settings  
4-3-1 Language  
4-3-2 Touch tones  
4-3-2-1 Manual touch tones  
4-3-2-2 Touch tone length  
4-3-3 Welcome note  
4-3-4 Roller function  
4-3-5 Display contrast  
4-3-6 Slide settings  
4-4 Security settings  
4-4-1 Call restrictions  
4-4-1-1 Restrict outgoing calls  
4-4-1-2 Restrict incoming calls  
*. Automatically selected when placed in car kit or hands free desk charging stand.  
†. Automatically selected when headset is attached.  
[ 18 ]  
Your phone’s menus  
4-4-2 Access codes  
4-4-2-1 Phone lock  
4-4-2-2 Allowed number when phone locked  
4-4-2-3 Change security code  
4-4-2-4 Change lock code  
4-5 Network services  
4-5-1 Voice privacy  
4-5-2 Own number selection  
4-5-3 Network feature setting  
4-5-4 Call forwarding*  
4-5-5 Call waiting*  
4-5-6 Send own caller ID when calling*  
4-5-7 Call mode (not visible in all wireless systems)  
4-5-8 Public system setting (not visible in all wireless systems)  
( * ) - Indicates option is visible in menu only when enabled  
4-6 Restore factory settings  
5 System  
5-1 Automatic  
5-2 Manual  
5-3 New search  
6 Games  
6-1 Snake II  
6-2 Rotation  
6-3 Racket  
6-4 Opposite  
6-5 Settings  
7 Calculator  
8 Calendar  
9 To-do list  
10 Services  
11 Infrared  
12 Keyguard  
[ 19 ]  
5. Making/receiving calls  
The following pages give you a brief description of the different ways to  
handle incoming and outgoing calls.  
Making a call using the keypad  
1. Open the sliding cover.  
2. Enter the phone number including the area code and press  
.
Making a call using the phone book  
For instructions on saving names and numbers to your phone book, see  
1. Press the roller and scroll to the desired name/entry.  
2. Press the roller and scroll to the desired number.  
3. Press the roller.  
Note: Sliding cover can be open or closed.  
Making other types of phone calls  
For more information on:  
Making a call using voice dialing, see "Dialing a number using voice  
Making a call with the sliding cover closed, see "Making a call using  
Making a call using 1-touch dialing, see "1-touch dialing" on page 44.  
Making an emergency call, see "Making an Emergency Call" on page 117.  
Answering a call  
You can answer a call using any one the following methods:  
Open the sliding cover, OR  
[ 20 ]  
               
Making/receiving calls  
Press the Answer selection key, OR  
Press  
.
Ending a call  
You can end a call using any one the following methods:  
Close the sliding cover, OR  
Press the End call selection key, OR  
Press the  
key.  
Rejecting a call  
If you don’t want to answer a call, but still want to silence the ringer and  
allow the call to go to your voicemail:  
Close the sliding cover, OR  
Press the Silent selection key, OR  
Press  
.
Last number redial  
The last ten phone numbers you dialed are saved in the phone’s memory.  
To redial one of these last dialed numbers:  
1. At the Start screen, press  
appears.  
. A list of the last 10 numbers dialed  
2. Scroll with the roller to the desired name/number.  
3. Press to dial the displayed name/number.  
Calling your voice mailbox  
Note: Voice mail is a network service. For more information and for the  
voice mailbox number, contact your service provider. Also see  
[ 21 ]  
               
To call your voice mailbox:  
Press and hold  
OR  
(at the Start screen)  
Press Listen when New voice message  
and the icon is displayed.  
Note: If the phone asks for your voice mailbox number,  
enter it and press OK.  
• Adjusting the earpiece  
volume  
You can adjust the earpiece volume while in a call  
by rolling the Navi roller upwards to increase the  
volume and downwards to decrease the volume.  
Note: You may need to press the Clear key to delete any characters on  
the phone’s screen prior to adjusting volume.  
[ 22 ]  
   
Letters and numbers  
6. Letters and numbers  
When working with the phone book, calendar, or to-do list, you can enter  
letters and numbers either via the phone’s keypad (1 to 9), or using the  
roller. When working with text messages or the to-do list, an additional  
option, called "predictive text input" is also available. For more information  
Entering characters via the NaviTM roller  
Enter letters, numbers, and punctuation using the roller  
1. Use the roller to scroll through the available  
characters(upper/lowercasecharacters, numbers,  
and punctuation).  
2. Press the roller to insert the highlighted letter  
or number.  
TIP:  
If you make a mistake, you can remove characters to the left by  
pressing Clear as many times as needed. Pressing and holding Clear  
clears the screen.  
To move the cursor, scroll to one of the arrow symbols (!,", #, or $%)  
and press the roller to move the cursor in the direction of the highlighted  
arrow symbol.  
Note: You can also move the cursor by first pressing Options, then pressing  
the roller at Move cursor. Scroll to the location you want and  
press Done to move the cursor.  
Entering characters via the keypad  
If you chose to use the keypad when entering text and  
other characters, the keypad functions in 2 modes:  
alpha mode and numeric mode. A status indicator in  
the upper left corner indicates what mode you are in.  
[ 23 ]  
           
Alpha mode has 4 sub-modes: ABC (upper case) and abc (lower case),  
title case, and sentence case (both indicated by Abc). Numeric mode is  
indicated by 123 in the upper left corner of the display.  
To enter a character, press the key labeled with the character you want;  
press once for the first character, twice for the second and so on.  
The available characters, depending on the display language chosen  
(see page 52), are:  
KEY  
1
CHARACTERS  
. , ? ! - & 1  
KEY  
6
CHARACTERS  
M N O 6 Ö Ô Ñ Ò Ó Ø  
P Q R S 7 $ ß  
T U V 8 Ü Ù Û Ú  
W X Y Z 9  
2
A B C 2 Ä À Á Â Ç Ã Æ  
D E F 3 È É Ë Ê  
G H I 4 Î Ï Ì Í Ð Ý  
J K L 5 £  
7
3
8
4
9
5
0
space, 0  
To switch between upper case and lower case, press  
To insert a number, press and hold the corresponding number key.  
Or, press and hold to switch to number mode. To switch back  
quickly.  
to alpha mode, press and hold  
again.  
To insert a space, press  
(only works in alpha mode).  
Pressing  
brings up a list of special characters. Scroll to the  
desired character and press the roller to select the highlighted character.  
TIP: When entering names in phone book, the phone uses title case, which  
automatically writes the first character of a name in upper case and  
the rest of the name in lower case. When writing a text message or  
other text, the phone uses sentence case, which automatically writes  
the first character of each sentence in upper case.  
[ 24 ]  
 
Phone book  
7. Phone book  
You can save up to 1000 entries (names and  
associated numbers) in your phone’s phone book.  
In addition, your phone book is capable of storing  
multiple numbers for each name (fax, business,  
mobile, etc.), as well as text information (postal  
address, e-mail address, etc.).  
Note: For more information on saving multiple numbers per name,  
as well as other information, see page 45.  
• Saving names and numbers  
Saving names and numbers  
There are several ways to save names and numbers in your phone book.  
To quickly save a number and name (Quick Save):  
1. Enter the phone number using the keypad.  
2. Press the left selection key twice (Options - Save).  
3. Enter a name and press OK.  
4. Press Done to return to the Start screen.  
TIP: Pressing and holding the Options selection key for 2 seconds after  
entering the number will store the number only.  
Saving via the phone book menu  
1. Press Names.  
2. Scroll to Add entry and press Select.  
3. Enter the name and press OK.  
4. Enter the area code (as necessary) and phone number, and press OK.  
[ 25 ]  
               
• Working with the phone book  
Using the phone book  
Press Names, scroll to the desired function (for example, Add entry or  
Find) and press the roller.  
Accessing your list of saved names and numbers  
At the Start screen, press the roller. The Names list will be displayed.  
TIP: You can also access the phone book by pressing Names, then select  
List names from the sub-menu.  
Making a call from the phone book  
Making a call from the phone book can come in handy when you want to  
make a call with the slide closed.  
1. Press Names, then select List names (or press the roller).  
2. Scroll to the desired name.  
3. Press and hold the roller to call the highlighted name.  
If there is more than one number saved under the name:  
1. Scroll to the desired name, and press the roller.  
2. Scroll to the desired number; press and hold the roller to dial the call.  
Note: For more information on saving multiple numbers per name, see  
• Phone book menus  
• List names  
• Find  
• Add entry  
• Edit  
• Erase  
- One by one  
- Erase all  
[ 26 ]  
             
Phone book  
• Add number  
• Options  
- Phone book view  
- Memory status  
• 1-touch dialing  
• Caller groups  
- Family  
Rename group  
Group ringing tone  
Group graphic  
Group members  
- VIP (same sub-menus as Family)  
- Friends (same sub-menus as Family)  
- Business (same sub-menus as Family)  
- Other (same sub-menus as Family)  
• Voice tags  
• Organizing the phone book  
Editing a name and number  
You can easily edit the name of a phone book entry, as well as the number  
or numbers assigned to that entry.  
1. Recall the phone book entry you want to edit and press Options.  
2. Select Edit name.  
3. Edit the name and press OK, then select the number you wish to edit  
and press Options.  
4. Scroll to Edit number and press Select.  
5. Edit the number and press OK.  
TIP: If you have other text information saved with this Phone book entry,  
highlight the entry and use Edit text to edit postal or E-mail address,  
or to edit the text note you have saved under a name.  
[ 27 ]  
       
Erasing a phone book entry  
You can remove a phone book entry (name and phone number(s)) from the  
phone book one by one or erase the entire contents of your phone book.  
Erasing a phone book entry  
1. Press the roller, scroll to the phone book entry to erase, and press Options.  
2. Scroll to Erase name and press Select.  
3. Press OK to confirm your choice.  
Note: All details (including multiple numbers and any text information)  
will be erased when using this option, and cannot be undone.  
Erasing all phone book entries  
1. At the Start screen, press Names.  
2. Scroll to Erase and press the roller.  
3. Scroll to Erase all and press the roller.  
4. Press OK to confirm your selection, enter your security code, then  
press OK to complete the process.  
Note: Once all names and numbers have been erased, they cannot  
be recovered.  
[ 28 ]  
   
Call log  
8. Call log  
Your phone keeps a log (record) of call-related information including the  
phone number of the other party. Calls are classified as missed (unanswered),  
received (answered), or dialed (either via the phone book or numbers entered  
from the keypad). In addition, the call log can record:  
The duration (elapsed time) of the last call.  
The date and time when the call was connected.  
For this feature to work properly  
you must have a subscription to Caller ID service.  
your phone was turned on and in a digital service area when the party  
placed the call.  
the caller did not choose to block Caller ID.  
the phone’s time and date must be set.  
Note: If the incoming call has caller ID blocked, the number cannot be  
recorded in the call log. For example, if you miss a call whose caller  
ID is blocked, pressing List at the missed call message will cause  
the message No new numbers to be displayed, then present the  
most recent call whose caller ID was available.  
Viewing call-related information  
Your phone records information about the 10 most recent missed, received,  
and dialed calls (10 entries for each type of call). To view call log entries:  
1. Press Menu-2 (Call log).  
2. Scroll to the type of call for which you want to view call-related  
information (Missed calls, Received calls, or Dialed calls), then press  
Select.  
3. If a phone book entry or phone number is displayed:  
• press  
to dial the number, or  
• press Options to view the associated details of the call or work with  
the number.  
[ 29 ]  
       
Note: If the call log is empty, No numbers is displayed.  
TIP: You can also access the last 10 dialed numbers by pressing  
then use the roller to scroll through the list. Press and hold the roller  
to redial the number, or press Options to work with the entry.  
Call-related information options  
The following options are available for call log entries:  
Call - Redials the number displayed.  
Call time - Displays the date and time when the call was first  
connected (if clock has been set).  
Edit number - Allows you to edit the number in the call log.  
Save - Allows you to quickly add the number to your phone book.  
Add to name - Allows you to save the number to an existing phone  
book entry.  
Erase - Erases the number from the call list (does not erase the  
number from your phone book, if it exists there).  
View number - When log entry matches a number in your phone book,  
this option permits you to view the number associated with the phone  
book entry (this option appears only if the number is stored in the  
phone book and a name is associated with it).  
Press the Options selection key to view any of the above options for an  
entry in the call log.  
Clear call lists  
This feature allows you to clear numbers from any one of the call lists, or  
all call lists simultaneously. To clear the call list(s):  
1. Press Menu 2-4 (Call log - Clear call lists).  
2. Scroll to All calls, Missed calls, Dialed calls, or Received calls, and  
press OK (All calls will clear all call lists, while the others clear their  
respective call lists).  
IMPORTANT: You cannot undo this operation.  
[ 30 ]  
       
Call log  
Note: When the Dialed calls list is cleared, it includes the shortcut to this  
list accessed when you press  
and roll with the roller.  
• Other call log options  
Call timers  
This menu feature is used to display the call duration of the Last call  
placed, and All calls made since the phone was reset by the user. The Life  
timer displays duration of all calls for the life of the phone (and cannot  
be reset).  
The phone can also display the call timer for the current call while in a  
call; when the call is completed, the timer displays the final call length.  
Press  
to clear the timer from the display.  
To display/hide current call timer:  
1. Press Menu 2-5-1 (Call log-Call timers-Last call); press Details  
(or wait 2 seconds).  
2. Press Select; scroll to either On or Off, and press OK.  
Clear call timers  
This feature clears all call timers (except for the life timer) for your phone.  
Note: This action cannot be undone.  
To clear all call timers:  
1. Press Menu 2-5-4 (Call log - Call timers - Clear timers).  
2. Press OK (or wait 3 seconds).  
3. Enter your security code (see page 58), and press OK to clear timers.  
[ 31 ]  
           
9. Voice messages  
Voice Mail is a feature that enables those who  
call you to leave a voice message, in the event  
you are unable to answer your phone. Using  
your phone in conjunction with your service  
provider’s voice mail system, you can retrieve  
your messages at any time.  
When you receive a voice message, New voice  
message will appear on the display (along with the  
icon), and you’ll  
hear a short beep. If you’ve received more than one message, your phone  
will indicate the number of new voice messages received.  
Setting up your voice mailbox  
Before you can retrieve any voice messages, you need to store your voice  
mailbox number in your phone. If your service provider has not already  
done this for you, they should provide you with information needed to  
access your voicemail.  
To store your voice mailbox number:  
Press Menu 1-4-2. Enter your voice mailbox number and press OK.  
(This number can be up to 32 digits long).  
Greetings, passwords, and prompts  
These may vary in different wireless systems. Your service provider should  
have provided you with information regarding how to record your greeting  
or how to store your password, in addition to information on how to listen  
to voice messages (once you’ve connected to your voice mailbox).  
Listening to your voice messages  
If New voice message is displayed, just press Listen and follow the  
prompts. If you’d rather listen to your messages later, press Exit.  
You can listen to messages anytime if you press and hold  
(or press  
, then press  
). Or if you prefer, you can access your voice  
mailbox by pressing Menu 1-4-1.  
[ 32 ]  
               
Profiles  
10. Profiles  
Your phone has various ways of notifying you  
of incoming calls, voice and text messages,  
reminders and warnings. The various settings  
relating to the audible, visible and vibrating  
alerts are stored as "profiles" in your phone.  
These profiles can be recalled quickly, based  
on the setting or environment in which you  
find yourself.  
The following customizable profiles are available: Normal, Silent, Meeting,  
Outdoor, and Pager.  
In addition, your phone has special profiles that are recalled when you  
plug in the optional headset, use the optional car kit, or use the hands free  
desktop charging stand (Headset and Hands free). Connecting your phone  
to these devices automatically enables these profiles.  
Normal is the default setting. However, you can switch to another profile  
as described in the next section.  
For more information on customizing a profile, see “Customizing a profile”  
• Selecting another profile  
1. At the Start screen, press the  
key momentarily.  
2. Scroll to the profile to that you want to use.  
3. Press the Navi roller to select the profile.  
Note: Use the Silent profile to silence the ringer on your phone.  
TIP: You can also access the profiles list by pressing Menu, scrolling to  
the Profiles menu, then pressing the Navi roller.  
[ 33 ]  
       
11. Advanced calling features  
Once you have familiarized yourself with the basic features of your phone,  
you may want to consider the following features to increase your productivity  
and enhance your calling experience.  
• Exploring the In-call menu options  
Your phone provides you with a number of features and options while you  
are in a call. Press the Options selection key while in a call to display the  
following in-call menu options:  
Choice  
What it does  
Send touch  
tones  
Sends a series of touch tones (either stored in the phone book,  
or entered from the keypad).  
Send flash  
Sends a flash command to the network (either stored in the  
phone book, or entered from the keypad).  
New call  
End all calls  
Phone book  
Menu  
Allows you to initiate a new call for 3-way calling.  
Ends all active calls (mainly for call-waiting/3-way calling).  
Allows you to access your phone book and all related menus.  
Used to access your phone’s menu.  
Mute  
Used to mute the phone’s microphone.  
The following can be performed while a call is active:  
Send touch tones  
When you press the keys during a call, your phone generates sounds known  
as touch tones. Use touch tones to access many automated, over-the-phone  
services such as voice mail, checking airline arrival/departure times, and  
bank balances. You must be on an active call to send touch tones.  
[ 34 ]  
           
Advanced calling features  
To send a series of touch-tones to the wireless system:  
1. While in a call, press Options.  
2. Select Send touch tones.  
3. Enter the string of touch tones to be sent via the keypad and press  
Tones, OR:  
Press Find, select the appropriate touch tone string saved in your  
phone book, press Select, then press Tones.  
Note: Touch tones are sometimes referred to as DTMF tones.  
Send flash  
This option allows you to send various types of commands to the wireless  
network (for example, transferring a call to another number). Consult your  
service provider for more information on how to use this feature.  
End all calls  
This option allows you to end all active and waiting calls simultaneously.  
Pressing the  
key during a 3-way call also ends all calls.  
New call  
This option is used to initiate a 3rd call for 3-way calling. Select this  
option, enter the new phone number, then press Call. Press  
to  
connect the new call to the call already in progress.  
Accessing Phone book and Menu  
Use these 2 options to access your phone book, or the phone’s menus.  
After selecting either of these 2 options from the in call menu, use the  
Phone book or phone’s menus as you normally would.  
Note: Not all of the Menus and Phone book options are available during  
a call (for example you cannot add a voice tag to a number while  
you have an active call).  
[ 35 ]  
               
Muting/unmuting the microphone  
You can mute and unmute your phone’s microphone while a call is in  
progress. When your microphone is muted, you can still hear the other caller.  
1. Press Options.  
2. Scroll to Mute, then press Select.  
3. To unmute the microphone, press Unmute.  
4. Muting and unmuting also affects the microphones of any accessories  
connected to the phone.  
Anykey answer  
When this feature is turned on, you can answer an incoming call by briefly  
pressing any key (while the sliding cover is open) except the Silent selection  
key,  
or  
.
To enable/disable Anykey answer:  
1. Press Menu 4-2-1 (Settings - Call settings - Anykey answer).  
2. Scroll to either Off or On, and press Select.  
• Caller ID  
This is a network service that helps identify incoming calls. Contact your  
service provider for details and availability.  
When Caller ID is active, your phone may display the caller’s phone number.  
The caller’s name may also display if their name and number has been  
stored in the phone book or if the wireless network supports it.  
Call-caller ID unavailable will display when the wireless network doesn’t  
recognize the calling number. Also, Call-caller ID blocked may display if  
the calling party has blocked caller ID.  
Note: If you have stored a number more than once in your phone book,  
and that number is stored each time with a different name, then  
a name will not appear when someone calls from that number.  
See “Phone book” on page 25 for details on your phone book.  
[ 36 ]  
           
Advanced calling features  
• Call forwarding  
This network service allows you to forward your incoming calls to another  
number (for example, your home or office phone number). Contact your  
service provider for more details, and for the proper activation codes.  
You can select one of the following forwarding modes:  
Forward all calls - all voice calls are forwarded and no ringing tone is  
played at an incoming call.  
Forward calls if number busy - voice calls are forwarded when your  
number is busy.  
Forward calls if not answered - voice calls are forwarded when you  
don’t answer a call within the preset time-out.  
Forward calls if out of reach or phone is off - voice calls are  
forwarded when your phone is switched off or outside of the network  
service area.  
Cancel all call forwarding - all call forwarding options are cancelled.  
For each of the above modes you can select Activate (turns forwarding  
on if allowed by the network) and Cancel (turns forwarding off). For more  
information on activating this service, see “Network feature setting” on  
• Call waiting  
This network service lets you receive an incoming call when you’re already  
in a call. (Contact your service provider for availability.) The phone beeps  
to let you know of the incoming call.  
To answering a waiting call:  
Press the  
key (or the Answer selection key) to automatically place  
the current active call on hold and answer the new call.  
[ 37 ]  
       
To reject a waiting call  
Either let the phone ring, or press the Quit selection key.  
To switch between the 2 calls  
Press  
.
To end the active call  
Simply allow the other party to hang up; the call on hold then becomes  
the active call. OR:  
1. Press  
while in the active call.  
2. The network will cause the call on hold to call your phone. Answer this  
as you would any normal incoming call.  
• Send own caller ID with next call  
This feature allows you to block caller ID when you call someone (your  
number will not be displayed on their caller ID). This feature works on  
a per-call basis. Contact your service provider for more details.  
Note: This feature is only effective when calling to a number that is  
equipped with Caller ID.  
Note: This feature is available only when supported by the wireless  
network, and may not function if you are roaming.  
For more information on activating and using this service, see “Network  
• 3-way conference calls  
This network service allows you to talk to two people at the same time.  
Note: Check with your service provider to make sure this service is  
available in your network.  
1. Make a call to the first participant as usual.  
2. When you’re ready to place a call to the third party, enter the number  
and press  
.
[ 38 ]  
       
Advanced calling features  
3. Press  
again to connect both parties.  
4. To end the call, press  
. This will disconnect both parties. If you  
only wish to disconnect with one party, have the other party terminate  
the call on his/her end.  
TIP: You can also dial the third party from the phone book. While in the  
call, press Options, scroll to Phone book. Press the roller twice. Scroll  
to the desired entry and press the roller. Scroll to the desired number  
(if necessary), then press and hold the roller to dial the call.  
Placing one of the parties on hold  
While all three parties are connected, pressing the  
key places the  
2nd party to join on hold. Pressing  
a third time returns the 2nd  
party to the conversation while putting the 1st party on hold.  
Note: Once you place one of the parties on hold, you are unable to rejoin  
all three parties in the conference call.  
• Automatic redial  
If automatic redial is turned on, your phone makes up to four attempts to  
connect the call when the system (not the number dialed) is busy.  
To turn on automatic redial:  
1. Press Menu 4-2-2 (Settings - Call settings - Automatic redial).  
2. Highlight On, then press Select.  
If the system is busy, you may hear a quick busy signal.  
To stop the phone from redialing, press  
.
Note: Automatic redial works when the wireless network is busy.  
Your phone will not redial to a phone number that is in use.  
Call settings  
5
• Calling card  
Calling card  
If you wish to use a calling card for long  
distance calls, you must first save your calling  
card information into your phone. Your phone  
is equipped to handle up to 4 calling cards.  
None  
Back  
Select  
[ 39 ]  
     
Saving calling card information  
1. Press Menu 4-2-4.  
2. Scroll to the calling card you want to edit, then press Options.  
3. Scroll to Edit, then press OK.  
4. Enter your security code (see page 58), then press OK.  
5. At Dialing sequence, press Select. Scroll to the dialing sequence your  
card uses, then press Select.  
6. Enter access number (usually the 1-800 number listed on the back of  
the calling card), then press OK.  
7. Enter your card number and/or PIN, then press OK. Your phone  
displays Save changes? Press OK.  
8. Scroll to Card name, then press Select. Enter the card name using  
your phone’s keypad, then press OK.  
Note: This procedure might not work with all calling cards. Please look  
at the back of your calling card or contact your long distance  
company for more information.  
Dialing sequence  
Use for cards that  
require you to:  
Cards using this  
sequence  
Access number  
+ phone number  
+ card number  
Dial 1-800 access number, then  
phone number, then card  
number (+ PIN if required)  
MCI, AT&T True  
Choice, Sprint  
Canada, Unitel  
Access number  
+ card number  
+ phone number  
Dial 1-800 access number, then  
card number (+ PIN if required),  
then phone number  
networkMCI,  
WorldPhone  
MCI, AT&T  
Prefix  
+ phone number  
+ card number  
Dial the prefix (any numbers  
that must precede the phone  
number) and phone number you  
want to dial, then card number  
(+ PIN if required)  
Verizon, PacBell,  
AT&T, Stentor  
[ 40 ]  
Advanced calling features  
Choosing a calling card to use  
Use Menu 4-2-4 to select a calling card to use. You will be required to  
enter your security code.  
Making calling card calls  
After you have saved your calling card information in your phone, you can  
make a call using your calling card.  
1. Enter the phone number, including any prefix (such as 0 or 1) that your  
calling card may require when you make a calling card call. See your  
calling card for instructions.  
2. Press and hold  
for a few seconds until your phone displays  
Card call.  
3. Your phone displays Wait for tone, then press OK. When you hear  
the tone or system message, press OK.  
4. Your phone displays Wait for tone, press OK again. When you hear  
the tone or system message, press OK.  
• Voice dialing  
You can dial up to 10 of your phone book’s stored numbers using the voice  
dialing feature. Before you can place a call using voice dialing, you must  
first assign a voice "tag" to the number.  
Assigning a voice tag to a phone number  
You can create a voice "tag" (such as a person’s name), for up to 10 phone  
book entries, then dial the number using the Voice dialing feature (see  
Assigning a voice tag to an entry  
1. At the Start screen, press the roller. Scroll to the desired phone book  
entry, and press the roller.  
2. Highlight the phone number to which you want to add a voice tag and  
press Options.  
[ 41 ]  
       
3. Scroll to Add voice tag and press Select. (The phone displays Press  
Start, then speak after the tone).  
4. Press Start, and after the tone, speak the voice tag clearly into the  
phone’s microphone.  
Note: If recording is not successful, your phone asks if you want to try again.  
Press Yes to try again or Quit to exit.  
The message Voice tag saved is displayed upon completion of the recording  
process. The  
icon next to a phone number denotes that a voice tag  
exists for this number.  
Important notes about voice tags:  
The voice tag can be no longer than 2 seconds in length.  
The voice tag is replayed immediately after recording as confirmation.  
The recording process stops automatically; pressing Quit aborts the  
recording attempt.  
For best results, choose a quiet location when creating the voice tag  
(avoiding those areas with background noise).  
Unique tags are recognized more accurately. Consider using first and last  
name, or first name, last name, and number type (e.g. mobile, home,  
work, etc.) when tagging a number. For example, "John Smith, work."  
Avoid pauses or silence as you record the voice tag.  
If the voice tag memory is full, the phone displays Erase an existing  
voice tag?If so, press OK, scroll to locate a tag to erase, then press Erase.  
Deleting a phone number erases any associated voice tags.  
Warning! Do not use a voice tag for dialing emergency numbers. In  
emergencies, stress causes changes in your voice, which may keep the  
phone from recognizing your voice command.  
[ 42 ]  
 
Advanced calling features  
Dialing a number using voice dialing  
1. At the Start screen, press and hold the Names selection key for 2 seconds.  
A tone is heard and Please speak now is displayed.  
2. After the tone, clearly speak the voice tag that you recorded previously  
into the microphone.  
Note: If the voice tag is not recognized by the phone (or if you fail  
to speak a tag within 3 seconds after the tone), the message  
Name not recognized willbe displayed, and thenyouare returned  
to the Start screen.  
3. When the voice tag is recognized:  
the phone book entry will be displayed on the screen for 3 seconds  
AND  
the voice tag is replayed (via the earpiece).  
After 3 seconds, the number is dialed.  
TIP: When the headset is connected, pressing the headset button  
momentarily at the Start screen has the same effect as pressing  
Names for 2 seconds. The alert tones will play through the headset.  
Speak the voice tag into the headset microphone. The voice tag will  
playback through the headset to confirm your choice.  
Working with an existing voice tag  
You can listen to an existing voice tag (in case you forgot what you  
recorded), re-record a voice tag, or erase an existing tag.  
1. At the Start screen, press the Names selection key. Scroll to Voice  
tags and press the roller.  
Note: This option displays a list of only those names/numbers that  
have been assigned a voice tag.  
2. Scroll to the phone number whose voice tag you want to edit, then  
press Options.  
3. Scroll to either Playback, Change, or Erase, and press the roller.  
Note: If you chose Change, press Start to begin re-recording. The new  
tag that is recorded replaces the old information.  
[ 43 ]  
       
• 1-touch dialing  
When a phone number is assigned to one of the number keys (2 to 9), you  
can call the phone number in either of the following ways:  
Press the corresponding number key (2 to 9) and press  
.
If the menu function 1-touch dialing is turned on (Menu 4-2-3), press  
and hold the corresponding number key until the call is started.  
Note:  
is pre-assigned to dial your voice mailbox number.  
Setting up 1-touch dialing  
If you want to assign a number to one of the number keys (2-8), do the  
following:  
1. Press Names.  
2. Scroll to 1-touch dialing and press the roller.  
3. Scroll to the desired number key (key 2 to key 9), and press Assign.  
Note: If a phone number is already assigned to a key, the phone book  
entry name is displayed and the left selection key is Options.  
4. Enter the phone number manually, or press Find to locate a phone  
book entry.  
5. Select the desired name or entry from the phone book. If more than  
1 number is stored for that entry, scroll to the desired number and  
press Select.  
1-touch dialing options  
You can change or erase (clear) numbers assigned to 1-touch dialing, view  
the number assigned to a key, or call from the 1-touch dialing menu.  
1. Press Names.  
2. Scroll to 1-touch dialing and press the roller.  
3. Scroll to the desired number key (key 2 to key 9), and press Options.  
4. Scroll to either Call, Change, Erase, or View number and press Select.  
[ 44 ]  
       
Advanced calling features  
• Phone book enhancements  
Multiple numbers per phone book entry  
The phone’s internal phone book allows you to store  
multiple phone numbers per name, as well as an  
e-mail address, street address, and text notes. You  
can store up to 5 numbers per name. The first number  
saved under a name is automatically set as the  
primary number for the name. For more information  
on primary numbers, see “Primary number” on page 46.  
Adding a new number to a name  
1. From the Start screen, press the roller. Scroll to the phone book entry  
you want to edit, and press Options.  
2. Scroll to Add number, and press the roller.  
3. Scroll to General, Mobile, Home, Work, or Fax, and press the roller.  
Note: You can later change the number type by using the Change  
Type option in the option list.  
4. Enter the number and press OK to save it.  
Editing a number  
1. From the Start screen, press the roller. Scroll to the phone book entry  
you want to edit, and press the roller.  
2. Scroll to the number you wish to edit and press the roller.  
3. Scroll to Edit number and press the roller.  
4. After making changes to the number, press OK.  
Erasing a number  
1. From the Start screen, press the roller. Scroll to the phone book entry  
you want to edit, and press the roller.  
2. Scroll to the number you wish to erase and press the roller.  
3. Scroll to Erase number and press the roller.  
[ 45 ]  
           
4. Press OK to confirm your choice.  
Warning! Once an entry is erased, it cannot be recovered.  
Primary number  
The first number stored with a name is designated as the "primary number,"  
and is the number dialed when pressing and holding the roller on the  
selected name/phone book entry.  
If you have multiple numbers stored in a phone book entry, you can  
designate any of the other numbers as the primary number:  
1. From the Start screen, press the roller. Scroll to the phone book entry  
you want to edit, and press the roller.  
2. Highlight the number you wish to designate as the primary number  
and press the roller.  
3. Scroll to Set as primary no. and press the roller.  
Note: The primary number is always the first number displayed when  
viewing the details of a phone book entry.  
Changing a number type  
When you add a new number to an existing phone book entry, you can  
specify what type of number you are entering at that time (General,  
Mobile, Home, Work, or Fax).  
If you need to change the number type:  
1. At the Start screen, press the roller. Select the  
phone book entry to edit, and press the roller.  
2. Press Options. Scroll to Change type and  
press the roller.  
3. Scroll and highlight the new number type.  
Press the roller to confirm your new selection.  
[ 46 ]  
       
Advanced calling features  
Saving text information  
You can store text information (such as E-mail address, postal address, or  
a personal note) with each phone book entry.  
Adding a text item to a name  
1. From the Start screen, press the roller. Scroll to the phone book entry  
you want to edit, and press Options.  
2. Scroll to Add text and press the roller.  
3. Scroll to either E-mail, Address, or Note, and press the roller.  
4. Enter the text (for example, an e-mail address), then press OK.  
Note: You may not be able to save multiple e-mail addresses, postal  
addresses or text notes, due to your phone book’s memory.  
Searching the phone book  
1. Press Names, scroll to Find and press the roller.  
2. Enter the first character(s) of the name you  
want to find and press Find.  
3. Scroll to the correct name and press the roller  
to view phone number(s).  
Quick Find: At the Start Screen, press the roller and enter the first few  
character(s) of the desired name. Scroll to the desired entry and press the  
roller to view the phone number(s) or other details.  
Phone book scroll view  
You can change the way you view the phone book’s information from the  
default Names list (showing an alphabetized list of entries) to Name and  
number (displays the name and the primary number).  
To change the phone book’s scrolling view:  
1. At the Start screen, press Names.  
2. Scroll to Options and press the roller.  
[ 47 ]  
           
3. Select Phone book view.  
4. Scroll to select the desired view and press the roller.  
• Caller groups  
You can set the phone to sound a specific ringing tone and flash a graphic  
(picture) on the display when you receive a call from a particular name  
and phone number. To do this, first include the name and number in the  
desired caller group. Then, select a ringing tone and graphic for this group.  
Note: You can set the phone to ring only upon calls from names and  
numbers that belong to a specific caller group. See “Advanced  
Adding a name and phone number to a caller group  
1. Once you have recalled the desired name and number from the phone  
book, press Options.  
2. Scroll to Caller groups, and press the roller.  
3. Scroll to the desired caller group (for example Family), and press  
the roller.  
Setting a ringing tone and graphic for a caller group  
1. Press Names.  
2. Scroll to Caller groups and press the roller.  
3. Scroll to one of the caller groups and press the roller.  
4. Scroll to one of the following functions and press the roller.  
Rename group  
Enter the new name for the caller group and press OK.  
Group ringing tone  
Scroll to the desired tone and press OK. Default is the tone selected  
for the currently selected profile.  
[ 48 ]  
   
Advanced calling features  
Group graphic  
Scroll to On, Off, View, Send graphic (sent via SMS), and press Select.  
Group Members  
Press Select to view group members. To add or remove a member,  
press Options, then select Add name or Remove name.  
5. If you selected Send graphic (sent via SMS), enter the recipient’s  
phone number or recall it from phone book and press OK.  
Note: You can also receive graphics via SMS. Once you receive a new  
graphic, scroll to View graphic or Save graphic and press OK.  
If you selected Save graphic, select the desired caller group and  
press OK.  
• Memory status  
You can check what percentage of the phone’s internal memory is in use  
and how much memory is still unoccupied.  
1. Press Names.  
2. Scroll to Options and press the roller.  
3. Scroll to Memory status and press the roller.  
The bar graph displayed is a visual representation of the percentage of the  
phone’s memory that is in use vs. available memory. The actual percentage  
of free and used memory is also displayed numerically.  
[ 49 ]  
   
12.Customize your phone  
• Customizing the Navi roller  
Pressing the roller at the Start screen activates the Roller menu. As a  
default, the Roller menu provides access to your phone book. You can change  
the Roller menu to provide access to any of the following optional menus:  
Quick Menu (allows you quick access to Messages, Calendar, To-do list,  
Profiles, Settings, Phone book, and Full menu), 1-touch dialing, and the  
Profiles menu.  
Changing roller function  
1. At the Start screen, press Menu 4-3-4 (Settings - Phone settings -  
Roller function), then press Select (or wait for 3 seconds).  
2. Scroll to the desired menu and press Select (or press the roller).  
• Working with profiles  
Even though your phone comes pre-configured with many different profiles  
to match your business and non-business environments, you can modify  
the existing profiles to better suit your needs.  
Customizing a profile  
1. Press  
once.  
2. Scroll to one of the following profiles: Normal  
(default), Silent, Meeting, Outdoor, Pager,  
Hands free, or Headset and press Options.  
Note: If phone is connected to car kit, hands  
free desktop charging stand, or headset,  
access to profiles is available via the Profiles menu only.  
3. Select Customize and press OK.  
[ 50 ]  
           
Customize your phone  
4. Scroll to the setting you want to customize (for example, Ringing  
tone) and press the roller.  
5. Scroll to the option you want and press OK.  
Settings you can customize  
Ringing option  
Defines how the phone notifies you of an incoming voice call. The options  
are: Ring, Ascending, Ring once, Beep once, and Silent.  
Note: If the ringing option is set to Silent, no ringing tone, message alert  
tone, keypad tones, warning tones, or game tones will be heard.  
Ringing tone  
Sets the ringing tone for voice calls. There are 35 to choose from, which  
will play as you scroll through the list.  
Ringing volume  
Sets the volume level for ringing and message alert tones.  
Message alert tone  
Sets the ringing tone type for text messages.  
Keypad tones  
Sets the volume level for keypad tones or turns the keypad tones off.  
Warning tones  
Turns warning and confirmation tones on or off. For example, when  
turned on, the phone sounds a warning tone when the battery is running  
out of power.  
Accepted caller groups  
Allows you to have the phone alert you only when a member of a selected  
calling group is calling.  
[ 51 ]  
       
Vibrating alert  
If you are using the optional vibrating battery, you can set your phone to  
vibrate on an incoming voice call.  
Note: The vibrating alert does not work when the phone is connected to  
a charger or desktop stand.  
Automatic answer (Handsfree and Headset profiles only)  
Sets the phone to answer an incoming voice call after one ring.  
Note: This function can only be used when your phone is connected to a  
headset, to the hands free desktop charging stand, or to a car kit  
equipped with the ignition sense option, with the ignition on.  
Lights (in Hands free profile only)  
Turns the display and keypad lights on or off.  
Renaming profiles  
You can rename any profile except Normal, Handsfree, and Headset.  
1. Press Menu, scroll with the roller to Profiles and press the roller.  
2. Scroll to the profile you want to rename and press Options.  
3. Scroll to Rename and press OK.  
4. Press and hold Clear to erase the existing name, then enter the new  
name and press OK. For information about entering letters, see page 23.  
• Display options  
Setting the display language  
You can use the Language menu (4-3-1) to select the language for your  
phone’s display. You can choose from the following languages:  
English, French, Spanish, Portuguese, Hebrew, and Russian.  
Language setting also affects the time and date formats of the following  
functions: Alarm clock (Menu 4-1-1), Clock (Menu 4-1-2) and Calendar  
(Menu 8), as well as enables the special character set (for text entry)  
unique to the language selected.  
[ 52 ]  
             
Customize your phone  
Display contrast  
To adjust the contrast of the phone’s LCD display, press Menu 4-3-5  
(Settings-Phone settings-Display contrast), and use the roller to adjust  
the contrast. Press OK to save the new setting.  
Displaying the current call timer  
The current call timer displays the approximate  
running time of the call you are currently on.  
To display the current call timer:  
1. Press Menu 2-5-1, then press Details  
(or wait for 3 seconds).  
2. Press Select and scroll to either Off or On.  
Press OK to confirm your choice.  
During a call, your phone displays the elapsed time of the current call.  
Upon completion of the call, the timer will show the final call time.  
Pressing the  
key clears the timer and returns you to the Start screen.  
• Clock  
Your phone contains a real-time clock that is integrated into other functions  
of your phone.  
The clock will display the current time on the Start screen.  
You can also choose to hide the clock if you prefer. See "Displaying or  
Note: Your phone also features an alarm clock. See "Alarm clock" on  
page 75 for details.  
Setting the time  
1. Press Menu 4-1-2(Settings- Time settings - Clock), and press Select  
(or wait 3 seconds).  
2. Scroll to Set the time, and press the roller.  
[ 53 ]  
               
3. Enter the current time, then press OK (time will appear in hh:mm).  
4. Select am or pm and press OK.  
Selecting a time format  
1. Press Menu 4-1-2 (Settings - Time settings - Clock), and press  
Select (or wait 3 seconds).  
2. Scroll to Time format, and press the roller.  
3. Scroll to either 24-hour or am/pm and press the roller.  
Displaying or hiding the clock  
1. Press Menu 4-1-2 (Settings - Time settings - Clock), and press  
Select (or wait 3 seconds).  
2. Depending on the current settings, either Hide clock or Show clock  
will be highlighted.  
3. Press Select.  
• Welcome note  
You can use the Welcome note menu (4-3-3) to create a brief message  
(up to 44 characters) that displays briefly every time the phone is  
switched on.  
• Restore factory settings  
You can use the Restore factory settings menu (Menu 4 - 6) to restore  
your phone back to its original configuration, without affecting the phone  
book, language settings or timers.  
Note: You will be required to enter your Security code before restoring  
the factory settings.  
[ 54 ]  
               
Customize your phone  
• Disable/enable the active slide  
You can disable the active slide feature in the event you don’t wish to  
answer or end calls using the slide.  
1. Press Menu 4-3-6 (Settings - Phone settings - Slide setting).  
2. Press Select. Scroll to Off or On and press the roller.  
Note: If you disable the active slide, closing or opening the cover will no  
longer activate or deactivate Keyguard. If you wish to use Keyguard  
with the active slide deactivated, you must manually enable and  
disable keyguard.  
[ 55 ]  
   
13.Security settings  
• Keypad lock (Keyguard)  
With keypad lock (keyguard) you can temporarily lock your phone’s keypad  
to prevent the keys from being accidentally pressed (for example, when  
the phone is in your pocket or in your purse).  
To lock the keypad:  
Close the sliding cover and press Lock Keys.  
appears at the top of the display.  
To unlock the keypad:  
Open the sliding cover.  
If you want to lock the keys without closing the slide, press Menu followed  
by (within three seconds). To unlock the keypad, press Unlock  
followed by either (within three seconds), or OK.  
It is possible to answer a call, even though keyguard is activated (see  
“Answering a call” on page 20). When the call has ended, keyguard will  
reactivate only if you used the Answer selection key or  
.
Note: Calls may be possible to the emergency number programmed into  
your phone (for example, 911 or other official emergency number).  
• Phone lock  
This feature protects your phone from unauthorized outgoing calls or  
unauthorized access to information stored in the phone. When activated,  
Phone locked will be displayed each time you turn your phone on or off.  
When you press either Names or Menu, you will be prompted for your lock  
code. Once your lock code has been accepted, your phone will function  
normally.  
Note: Call not allowed will be displayed if you attempt to place a call  
while phone is locked.  
[ 56 ]  
           
Security settings  
Activating and deactivating phone lock  
Press Menu 4-4-2-1 (Settings - Security settings - Access codes -  
Phone lock). Enter the lock code then press OK. Then scroll to On or Off,  
and press OK. Complete the phone lock activation or deactivation by  
turning your phone off and back on.  
When your phone is locked, calls may be possible to the emergency number  
programmed into your phone (e.g. 911 or other official emergency number).  
You can also store a number in the Allowed number when phone locked  
location, which allows you to call this number even though your phone is  
Answering a call with phone lock on  
Press any key except  
and  
.
Allowed number when phone locked  
When the phone lock is on, no calls can be made. But if you store a number  
in the allowed number location, you can make a call to that number while  
the phone is locked.  
Storing the allowed phone number  
1. Press Menu 4-4-2-2 (Settings - Security settings - Access codes -  
Allowed number when phone locked).  
2. Enter lock code and press OK.  
3. Enter phone number at Number: (or press Find and recall the number  
from the phone book) and press OK.  
Calling the allowed phone number  
Note: Your phone must be locked via the phone lock to use this feature.  
Roll the roller either up or down. The allowed number will be displayed.  
Press  
to place the call.  
[ 57 ]  
         
• Access codes  
These codes may only include the characters 0 to 9. The phone prompts  
you to enter the current code and the new code. It also prompts you to  
verify the new code.  
Note: Avoid using access codes similar to the emergency numbers, such  
as 911, to prevent accidental dialling of the emergency number.  
Security code  
Your phone will prompt you for a five digit security code for certain features.  
These features can be used only after the correct security code has been  
successfully entered.  
Note: When entering your security code, *****will appear on the  
display to keep others from viewing your code.  
If you make a mistake entering the code, erase the last entered digit by  
pressing Clear (or press and holdClear to delete all the digits on your display).  
Then enter the correct code or press Back to exit the current feature.  
If you enter an incorrect security code (Code error will appear) five times  
in a row, your phone won’t accept any entries for the next five minutes.  
Your phone’s default security code is 12345. It’s highly recommended  
that you change this code at once, write it down, and store it in a safe  
place away from your phone.  
Changing your security code  
1. Press Menu 4-4-2-3 (Settings - Security settings - Access codes -  
Change security code) and press Select.  
2. Enter existing (or default) security code and press OK.  
3. Enter new 5-digit security code and press OK.  
4. Re-enter your new 5-digit security code for verification, and press OK.  
5. Phone will display Security code changed.  
Note: If you have changed your security code and don’t remember the  
new code, contact your service provider. Once you have changed  
your security code, the default setting is no longer valid.  
[ 58 ]  
         
Security settings  
Lock code  
You’ll need the lock code to activate and deactivate Phone Lock, or to  
change your lock code. The default lock code is 1234. If you enter an  
incorrect lock code five times in a row, your phone will prompt you for  
the security code (see page 58).  
Changing your lock code  
In a lock code, only numeric characters are accepted.  
1. Enter Menu 4-4-2-4 (Settings - Security settings - Access codes -  
Change lock code) and press Select.  
2. Enter current (or default) lock code and press OK.  
3. Enter new lock code, press OK.  
4. Re-enter new lock code for verification, press OK.  
Note: When you change your lock code, make sure you store it in a safe  
place, away from your phone. Avoid entering access codes similar  
to emergency numbers to prevent accidental emergency calls.  
• Call restrictions  
This feature allows you to restrict incoming and outgoing calls. Outgoing  
calls are restricted from a list of restrictions that you create yourself.  
Incoming calls are restricted to the All calls option (you cannot create a  
list of restrictions for incoming calls).  
Restricting outgoing calls  
Upon selecting Restrict outgoing calls from the menu, you are presented  
with the following options:  
Select allows you to select call restrictions from the outgoing calls list.  
Note: This menu option is available only when one restriction has  
been enabled.  
Add restriction allows you to create your own list of outgoing call  
restrictions.  
[ 59 ]  
         
Once you have accessed Add restriction and have added at least one  
restriction, the following options will be added to the menu for that  
option:  
Edit allows you to edit an existing outgoing call restriction.  
Erase will erase any existing outgoing call restrictions.  
Note: When calls are restricted, calls may be possible to the emergency  
number programmed into your phone (e.g. 911 or other official  
emergency numbers).  
Adding outgoing call restrictions  
You can add up to 10 restrictions for outgoing calls. The maximum  
number of characters you can enter for each restriction is 15.  
1. Press Menu 4-4-1 (Settings - Security settings - Call restrictions)  
2. Select Restrict outgoing calls.  
3. Enter the security code and press OK.  
4. Scroll to Add restriction to create an outgoing call restriction and  
press OK.  
5. Enter the number string you wish to restrict and press OK. For example:  
If you wish to restrict all calls that begin with 1, enter 1.  
If you wish to restrict all calls that begin with 1972, enter 1972.  
If you wish to restrict all calls that begin with 214, enter 214.  
If you wish to enter a name for the call restriction, enter the name  
using your phone’s keypad, then press OK. If a name is not entered,  
the number that is restricted will appear in place of the name.  
Note: When creating a new restriction, that restriction is automatically  
selected (enabled) at the time it is saved.  
[ 60 ]  
 
Security settings  
Selecting call restrictions  
1. Press Menu 4-4-1 (Settings - Security  
settings - Call restrictions).  
2. Scroll to Restrict outgoing calls or Restrict  
incoming calls and press Select.  
3. Enter the security code and press OK.  
4. Scroll to Select and press OK.  
5. Scroll to each restriction you wish to use and press Mark; press  
Unmark to deactivate existing restrictions.  
6. Press Back and then press Yes (when prompted Save changes?).  
Editing call restrictions  
1. Press Menu 4-4-1 (Settings - Security settings - Call restrictions).  
2. Scroll to Restrict outgoing calls and press Select.  
3. Enter the security code and press OK.  
4. Scroll to Edit and press Select.  
5. Scroll to the restriction you wish to edit, press Select.  
Note: If no name has been entered for a restriction, the restricted  
number will be displayed.  
6. Press and hold Clear to erase entire number, then enter the new  
characters. Or use the roller to insert additional characters. Press OK  
when finished.  
7. Edit name if desired using same procedure as above.  
Erasing call restrictions  
1. Press Menu 4-4-1 (Settings - Security settings - Call restrictions).  
2. Scroll to Restrict outgoing calls and press Select.  
3. Enter the security code and press OK.  
4. Scroll to Erase and press Select.  
5. Scroll to the restriction you wish to erase, press Select.  
6. Press OK again to erase restriction.  
[ 61 ]  
       
14.Text messages  
Using the Messages menu (Menu 1) and Short  
Message Service (SMS), you can read, write and  
send text messages to another phone or to an  
e-mail address (if supported by your network).  
Note: Text messaging is a network-dependent  
feature. You may be required to subscribe to  
this service. Please contact your service provider for more information.  
• Reading text messages  
When you have received a text message, the  
indicator and the text:  
(#) Message(s) received will appear on the display (where # is the number  
of new messages received).  
1. Press OK to read the message or press Exit to view it later.  
2. While reading the message, press Options to scroll through the list of  
message options and press the roller to select the highlighted option.  
Reading unread messages later/re-reading messages  
From the Messages menu, press Inbox. Scroll to the desired message and  
press the roller to read it.  
Note:  
in front of the message header indicates the message has not  
been read. in front of the message header indicates you have  
already viewed the message.  
Message options  
The Options sub-menu includes options for reading, erasing, replying,  
forwarding, or moving the message to the Archive folder.  
You can also copy the message to your phone’s calendar as a reminder  
note by using the Copy to calendar option.  
[ 62 ]  
   
Text messages  
The Use number option captures a phone number that appears in the  
text message (or from the phone sending the SMS message) and  
provides you with options to Save the number to your phone book,  
Add to name (add to existing phone book entry), Send message  
(to the number) or Call.  
About message memory  
Messages are stored in the following locations:  
Inbox - stores new messages and read messages.  
Outbox - saves copies of all sent messages or messages waiting to  
be sent (in the event the network is temporarily unavailable).  
Archive - used to file read messages and sent messages for long-  
term storage.  
A blinking  
icon indicates the text message memory is full. Before you  
can receive, save, or send any new messages, you must delete older messages  
from your Inbox, Outbox, or the Archive folder.  
Erasing individual text messages  
1. Once in the Messages menu, highlight the message you wish to erase  
in either the Inbox, Outbox, or Archive.  
2. Press Options, scroll to Erase and press Select. Press OK to confirm  
your choice.  
Erase message options  
The Messages menu has an option that allows you to erase the entire  
contents of your messages folders as described below.  
All read - erases all read messages from Inbox (unread messages remain  
intact).  
Inbox - erases all messages in this folder.  
Outbox - erases all messages in this folder.  
Archive - erases all messages in this folder.  
[ 63 ]  
Erasing messages in the message folders  
1. At the Start screen, press Menu 1-5 (Messages - Erase messages).  
2. Highlight the folder whose contents you wish erased and press OK.  
3. Enter your security code and press OK to complete the erase process.  
• Using predictive text input  
Your phone offers you a quick way to write text messages via a very highly  
compressed database of common words (or "dictionary"). When you use  
the keypad to spell a word, predictive text input tries to anticipate the  
word you are trying to enter, saving you time when creating messages.  
Enabling predictive text input  
1. Begin writing a message. Press the Options key after you have entered  
the first letter.  
2. Scroll to Dictionary and press the roller.  
3. Scroll to select the desired dictionary language, and press the roller.  
TIP: To quickly enable or disable predictive text input, press and hold the  
Options selection key at the text input display.  
Note: When predictive text input is in use, the  
indicator is shown  
at the top of the display.  
Note: If you decide not to use predictive text input for writing messages,  
use the same procedure to select Dictionary off.  
Entering text using predictive text input  
1. Press each key only once for each letter (unlike traditional text input).  
For example, to write ’Nokia’, press 6-6-5-4-2.  
Note: Do not pay attention to how the word appears on the display until  
you have completed the word.  
[ 64 ]  
   
Text messages  
2. If the displayed word is correct, press  
to get a space, then start  
writing the next word. If the displayed word is not correct, press  
to view other word options. To return to the previous match,  
press Previous.  
TIP: To view the list of matches, press Options, scroll to Next match, then  
press the roller. If there is no matching word, press Insert to enter via  
Inserting numbers  
To enter a number, press and hold the desired number key.  
If you wish to switch to traditional number input, press and hold the  
key. Upon completion of the number entry, press and hold the key again  
to return to predictive text entry.  
Inserting punctuation symbols and special characters  
Press  
correct symbol. To change the symbol (when the symbols is highlighted),  
press repeatedly until the desired symbol appears.  
to add a punctuation symbol. The phone tries to predict the  
To insert a different symbol or special character, press and hold  
to  
enter the list of special characters. Then scroll to the character you want  
to use and press OK.  
Deleting characters and words  
Press Clear to delete the character to the left of the cursor.  
To delete the highlighted word, press  
When the cursor is between two words, press  
Clear to delete the preceding word.  
first and then press Clear.  
first and then press  
Changing character case  
Press  
once to change the character case (when the cursor is next  
to a word or within a word).  
[ 65 ]  
Adding a new word to the dictionary  
You will be prompted to add a new word to the dictionary (via traditional  
text input) if you try to write a word that does not already exist.  
1. Press Spell.  
Note: You can also access the traditional text input screen by pressing  
Options, then selecting Edit word.  
2. Enter the word via traditional text input (see page 23) and press Save.  
The word is added to the dictionary and to the message you are writing,  
and you return to the predictive text input screen.  
You can add hundreds of words to the dictionary, depending on the language  
used and the length of words added.  
Notes:  
The words not included in the dictionary and which you accept (even  
accidentally) while in the predictive text input by pressing the roller,  
by pressing 0, or by deleting space between two words (thus forming  
a compound word), will automatically be saved in the dictionary.  
When the dictionary becomes full, the most recently added word will  
replace the oldest word you have previously added.  
Writing compound words  
Instead of writing the whole compound word at once, you can write its  
first part, press the roller to accept it, and write the second part.  
TIP: You can also accept the first part of the compound word by first  
adding a space (by pressing 0) and then removing the space by  
pressing Clear once.  
[ 66 ]  
 
Text messages  
• Writing and sending  
text messages  
You can use the Messages menu to create and  
send text messages to another mobile phone, or  
to an e-mail address. You can also save a draft of  
your message in the Archives folder for later use.  
TIP: Since SMS limits the number of characters in the message, a  
character counter appears in the upper right-hand corner of your  
phone’s display.  
Writing and sending a text message  
1. From the Start screen, press Menu, then press the roller.  
2. Scroll to Write message and press the roller.  
3. Enter your message. For more information about entering text, see  
4. To send the message, press Options, and then select Send message.  
Enter the phone number (or press Find to recall a number from the  
phone book) and then press Send.  
TIP: The Message Options menu includes options for sending, saving, or  
erasing the message you are writing.  
Writing and sending an e-mail message  
1. From the Start screen, press Menu, then press the roller.  
2. Scroll to Write e-mail and press the roller.  
3. Enter the e-mail address (or press Find to recall an address from the  
phone book) and press OK.  
4. Enter a subject for your message, then press OK.  
Note: The recipient’s e-mail address and message subject appear at  
the beginning of the text message.  
[ 67 ]  
     
5. Enter your message. For more information about entering text, see  
6. Press Options, then select Send e-mail.  
Note: Please contact your service provider in the event you are  
prompted for the e-mail gateway number.  
7. Press Send to send the message.  
A copy of all sent messages remain in your Outbox. Press Back to return  
to the Messages menu, or press  
to return to the Start screen.  
Replying to a message  
Your phone allows you to reply to a text message  
with either a similar text message, or as an e-mail  
message. The origin of the message or the sender’s  
wireless network will affect how you reply to the  
incoming message.  
Note: Check with your service provider to see if mobile originated e-mail  
messages are available in your network.  
Replying via SMS  
1. While viewing a message, press Options.  
2. Scroll to Reply and press the roller.  
3. Scroll to one of the following reply types and press the roller:  
Empty screen - gives you an empty text buffer.  
Original messages - original message is included in the reply  
message.  
One of the standard answer templates (includes the ability to edit  
the answer or add additional text). Standard answers include: Yes,  
No, OK, Thank you, Congratulations, Happy birthday, I love you  
too, Hugs and kisses, Sorry, and Sorry, I’m late.  
4. After you write your reply, press Options, and select Send message.  
Press Send to send the message to the displayed number.  
[ 68 ]  
 
Text messages  
Replying via e-mail  
1. While viewing a message, press Options.  
2. Scroll to Reply as e-mail and press the roller.  
3. Scroll to one of the following reply types and press the roller:  
Empty screen - gives you an empty text buffer.  
One of the standard answer templates (includes the ability to edit  
the answer or add additional text). Standard answers include: Yes,  
No, OK, Thank you, Congratulations, Happy birthday, I love you  
too, Hugs and kisses, Sorry, and Sorry, I’m late.  
Note: If the incoming e-mail message is improperly formatted, you  
may be required to re-enter the e-mail address (or press Find  
to recall an address from the phone book), then press OK.  
4. Enter a subject for your message, then press OK.  
Note: The recipient’s e-mail address and message subject appear at  
the beginning of the text message.  
5. Enter your message. For more information about entering text, see  
6. Press Options, then select Send e-mail.  
Note: Please contact your service provider in the event you are  
prompted for the e-mail gateway number.  
7. Press Send to send the message.  
A copy of all sent messages remain in your Outbox. Press Back to return  
to the Messages menu, or press  
to return to the Start screen.  
Forwarding messages  
Use the Forward or Forward as e-mail options to forward incoming  
messages to other users.  
page 67 and follow the instructions for completing the message.  
[ 69 ]  
After you select Forward as e-mail, see “Writing and sending an e-mail  
message” on page 67 and follow the instructions for completing the  
message.  
Message settings  
You can assign several settings to the text messages you create. To access  
these options, press Options, scroll to Message settings, then press Select.  
Your choices are:  
Urgent - sends the message as urgent.  
Read receipt - lets you know when the recipient has read your  
message.  
Callback no. - includes your number in the message so the recipient  
can easily call you once they have received your message.  
Assigning message options  
1. Scroll to the desired setting, and then press Mark.  
2. Press Back, and then press Yes to save changes to your message.  
3. Scroll up and select Send message (or select one of the other message  
options).  
Messages in the Outbox  
If you try to send a text message and the network is unavailable, the  
outgoing message will be saved in the Outbox.  
Viewing the message saved in the Outbox  
1. From the Messages menu, scroll to Outbox and press the roller.  
2. Scroll to the desired message and press the roller to view it.  
3. To resend the message, press Options, select the desired send option  
(Send message, Send e-mail), and press Send.  
The Outbox Options includes the same options as the Options list for  
reading the message; however, Reply is not available.  
[ 70 ]  
 
Your personal assistant  
15.Your personal assistant  
Did you know that your phone can wake you up in the morning, remind  
you of meetings, birthdays, and tasks, display the current time, calculate  
your tip at dinner, and convert currencies? Your phone has a calendar,  
to-do list, clock, alarm clock, calendar, and phone book—everything you  
need in a personal digital assistant. Read on to find out more.  
• Calendar  
You can use the phone’s calendar to record "calendar notes" to remind  
you of appointments such as meetings, phone calls, birthdays, or general  
reminders. Alarms can also be set to notify you of your appointments or notes.  
Remember! Your phone must be switched on to use this function. Do not  
switch on the phone when wireless phone use is prohibited or when it  
may cause interference or danger.  
Calendar views  
Week list  
Press Menu, scroll to Calendar, and press View  
to view the week list. Use week list to view  
your calendar week by week.  
Tips:  
You can also access the week list while in  
the Day list by pressing Options, scrolling  
to View by weeks, and pressing Select.  
In either the day list or week list, you can quickly jump to a certain  
date by entering the date via the keypad. For example, if today is  
the 9th, and you enter 3, the calendar displays the 3rd day of the  
following month.  
[ 71 ]  
     
Day list  
Press Menu, scroll to Calendar, and press the  
roller to access the day list.  
Use the Day list to scroll through your calendar  
day by day. For each day, the day list shows the  
date and the icon for each type of appointment  
you have set for the day. See “Adding a calendar  
Day view  
Once in the day list, scroll to the desired day  
and press the roller to access the day view.  
Day view allows you to scroll through the notes  
made for the selected day. The option list for  
day view includes the following options: Make  
a note, Erase, Edit, Reschedule, Repeat the  
current note (every day, every week, biweekly or  
every year), and View the current note.  
View by weeks returns you to the week list. Go to date is used to jump  
to a specific date. You can also Copy the note to another day.  
The Send note option provides various options for sending the current  
note (via IR, via SMS, or as an SMS text message).  
The Settings option allows you to set the date, time, date format, time  
format and week format for the calendar. The option Auto erase allows  
you to set the phone to automatically delete old notes after a specified  
period of time. However, repeat notes (for example, birthday or anniversary  
notes) will not be deleted.  
Tip: When you are in the day list, day view or week list, you can quickly  
go to today’s day view by pressing  
.
[ 72 ]  
Your personal assistant  
Note view  
Once in the day view, scroll to the desired note  
and press the roller to view the details of the  
appointment or reminder. Note view allows you to  
view the details of the selected note.  
The option list for note view include: Make a note,  
Erase, Edit, Reschedule, Repeat the current note  
(every day, every week, biweekly or every year).  
View by weeks returns you to the week list. Go to date is used to jump  
to a specific date. You can also Copy the note to another day.  
The Send note option provides various options for sending the current  
note (via IR, via SMS, or as an SMS text message).  
The Settings option allows you to set the date, time, date format, time  
format and week format for the calendar. The option Auto erase allows  
you to set the phone to automatically delete old notes after a specified  
period of time. However, repeat notes (for example, birthday or anniversary  
notes) will not be deleted.  
Adding a calendar note  
1. While in the Day view, scroll to the desired day and press Options.  
2. Select Make note.  
3. Scroll to one of the following note types and press the roller:  
(for information about entering letters and numbers, see page 23)  
Note: Predictive text input is not available for this feature.  
Meeting - Enter the note and press OK. Enter the time and press OK.  
Call - Enter the desired phone number (or press Find to recall it  
from phone book) and press OK. Enter the time and press OK.  
Birthday - Enter the person’s name (or press Find to recall it from  
phone book) and press OK. Enter date of birth and year (optional).  
If you enter the year of birth, the note also displays the person’s age.  
[ 73 ]  
   
General note - Enter the note and press OK.  
4. Scroll to the desired alarm option and press the roller. If you select  
Other, enter the alarm time and press Select.  
The presence of an alarm is indicated by  
when you view the notes.  
When the alarm sounds for a note  
The phone flashes its lights, beeps, and displays the note. With a Call note  
on the display, you can call the displayed number by pressing  
.
To stop the alarm, press Exit or  
.
• To-do list  
Use this feature to create a to-do list and  
prioritize to-do items.  
Adding a task  
1. Press Menu, scroll to To-do list and press Add.  
2. Enter the subject of the To-do note and press OK. (For information  
3. Then scroll to the desired priority (1, 2 or 3) and press Select. You can  
change the priority later by using the Options menu: Change priority.  
Viewing tasks  
Once in the To-do list, scroll to an item and  
press the roller to view its details.  
From the tasks’ Options menu, you can add,  
erase or edit the note. There are also options for:  
• Viewing the calendar.  
• Saving the to-do note to the calendar as a day note.  
• Sending the note via SMS.  
• Turning on/off predictive text (dictionary).  
[ 74 ]  
 
Your personal assistant  
• Alarm clock  
The Alarm clock function of your phone’s clock (Menu 4-1-1) can be set  
to sound an alarm at a time you specify.  
The alarm clock uses the time format set for the phone clock (12-hour or  
24-hour format). The  
icon, displayed on the Start screen, indicates  
that an alarm is set. The alarm clock will work, regardless if the phone is  
on or off.  
When the alarm sounds  
The phone sounds an alert tone. In addition, the text Alarm!, the  
current time, a series of animated icons, and the phone’s lights all  
flash simultaneously.  
Pressing the Stop selection key or the  
key stops the alarm from  
sounding, and returns you to the Start screen.  
Snoozing  
There are several ways you can enable the Snooze feature:  
• Press the Snooze selection key.  
• Press any key (except  
).  
• Allow the alarm to sound for 1 minute.  
Once snooze is enabled, the alarm will sound again in five (5) minutes.  
If an alarm is set to ring while the phone is switched off, the phone will  
turn itself on and sound the alarm. If you press Stop, the text Switch the  
phone on? is displayed. Press Yes to place the phone in call mode, or No  
to switch off the phone.  
Remember! Do not switch on the phone when wireless phone use is  
prohibited or when it may cause interference or danger.  
[ 75 ]  
   
• Calculator  
You can use your phone’s calculator to add, subtract, multiply or divide  
numbers and convert currencies.  
REMEMBER! Do not switch on the phone when wireless phone use is  
prohibited or when it may cause interference or danger.  
Using the calculator  
1. Press Menu, scroll to Calculator, and press the roller.  
2. “0” appears on the screen. Enter the first number in the calculation  
(press  
for decimal point).  
3. To add, press  
once (+appears); to subtract, press  
twice  
( -); to multiply, press  
three times ( *); to divide, press  
four times ( /).  
Note: You can also press Options, scroll to Add, Subtract, Multiply  
or Divide and press Select.  
4. Enter the second number. Repeat steps 3 and 4 as many times as  
necessary.  
Note: A subtotal is shown after you enter the next operant (+, -, *, or /).  
5. For a total, press Options (or press the roller) twice.  
6. To start a new calculation, press and hold Clear for 2 seconds.  
Note: This calculator has limited accuracy and rounding errors may  
occur, especially in long divisions.  
Using calculator for currency conversion  
Setting the exchange rate  
1. Press Menu, scroll to Calculator, and press the roller.  
2. Press Options. Select Exchange rate.  
[ 76 ]  
           
Your personal assistant  
3. Scroll to How many foreign units to a home unit or How many  
home units to a foreign unit (depending on how you wish to convert  
the currency), and press Select.  
4. Enter the appropriate exchange rate and press OK (use the  
key  
for decimals). Exchange rate is displayed.  
Currency conversion  
1. Once you have set the exchange rate, enter the amount to be  
converted (use  
to enter a decimal point).  
2. Press Options scroll to either In home currency or In foreign  
currency, and press OK.  
The phone displays the converted amount.  
TIP: If you chose How many foreign units to a home unit while saving  
the exchange rate, the How many home units to a foreign unit  
option is automatically calculated and saved (or vice versa).  
• Contact manager  
You can use your phone’s internal phone book as a contact manager by  
saving a person’s contact information (such as street address, e-mail  
address, text notes, etc.) along with their name. See “Saving text information”  
[ 77 ]  
   
16.Infrared connections  
Use the Infrared menu (Menu 11) to activate  
communications between your phone and other  
devices through its infrared (IR) port. To connect  
via IR, the device with which you want to connect  
must be IrDA compliant. Your Nokia phone is a  
Class 1 Laser Product.  
Note: The preferable distance between the two devices in infrared  
connection is a range of 3 inches to three feet maximum. There  
must be no obstructions between the two devices and the IR ports  
of the two devices have to be pointing at each other.  
• Sending and receiving data via IR  
Your phone has the ability to send and receive certain types of data via  
the infrared port; no additional cable or software is needed.  
You can send and receive phone book entries (business cards), and calendar  
notes via IR. Transmission/reception must be to/from a compatible phone or  
device (for example, another phone, computer or handheld device).  
General notes about sending or receiving via IR  
1. Ensure that the IR ports of the two devices are pointing at each other.  
2. IR must be activated via the IR menu prior to sending or receiving.  
3. The user of the sending device selects the desired IR function to start  
data transfer.  
If data transfer is not started within 2 minutes after the activation of the  
IR port, the connection is cancelled and has to be started again.  
[ 78 ]  
       
Infrared connections  
Checking the status of an IR connection  
The status of an IR connection is indicated by  
.
When  
is shown continuously, there is an IR connection between  
your phone and the other device.  
When  
When  
is not shown, no IR connection exists.  
blinks, your phone is trying to connect to the other device  
or the connection has been lost.  
Other types of IR connections  
You can also establish a 2-way connection between your PC or laptop  
computer and your phone via infrared. With this type of connection, your  
phone can:  
function as an external modem connected via IR. Use your existing  
data software (Dial-up Networking, AOL, etc.) or fax software (WinFax  
Pro, HotFax, etc.) to send and receive faxes, connect to the Internet,  
or check e-mail. For more information, see the accompanying PC  
Connectivity Guide.  
synchronize it’s phone book, calendar, and to-do list with some of the  
most popular Personal Information Manager (PIM) programs on the  
market (Outlook, ACT!, Lotus Organizer, Gold Mine, etc.). Use the  
FoneSync application found on the Nokia CD-ROM in conjunction  
with your existing PIM application to keep all of your information  
up-to-date.  
Transmitting phone book via IR  
Your phone can transmit its phone book information using the industry  
standard v.card format via it’s infrared (IR) port. "Business cards" (v.cards)  
can be sent to another phone, a PC (running the appropriate software) or  
other IR-equipped handheld devices (such as Palm™, and Psion Series 5™).  
[ 79 ]  
           
Sending a business card to another phone or other device  
Note: Make sure that the other phone or device is set to receive data via  
its IR port. Please refer to the user guide for the receiving device  
for more information on enabling IR communications and receiving  
data over IR.  
1. Press the roller and scroll to the desired phone book entry. Press the  
roller twice.  
2. Scroll to Send card via IR (to send phone book entry).  
3. Align the infrared ports of both devices, then press the roller.  
Receiving a business card from another phone or other device  
To receive business cards from another compatible phone, you need to  
first enable infrared communications using the Infrared menu (Menu 11).  
Then, the user of the other phone or devices sends you a business card as  
described above.  
Once you have received the name and phone number, press Show. Then  
press Options, select Save or Discard, and press OK.  
Calendar notes via IR  
You can send and receive calendar notes between phones, as well as  
between other IR-equipped devices (such as Palm™, and Psion Series 5™).  
Note: Make sure that the other phone or device is set to receive data via  
its IR port. Please refer to the user guide for the receiving device  
for more information on enabling IR communications and receiving  
data over IR.  
Sending a calendar note to another device  
1. Scroll to the day on which the calendar note you wish to send is saved  
and press the roller.  
2. Scroll (if necessary) and highlight the desired note and press Options.  
3. Scroll to Send note and press the roller.  
4. Align the infrared ports of both devices.  
5. Highlight Send via IR and press the roller to initiate data transfer.  
[ 80 ]  
   
DLR-3P connections  
17.DLR-3P connections  
You can establish a 2-way connection between your PC or laptop computer  
and your phone via the DLR-3P serial cable. With this type of connection,  
your phone can:  
function as an external modem connected via the DLR-3P. Use your  
existing data software (Dial-up Networking, AOL, etc.) or fax software  
(WinFax Pro, HotFax, etc.) to send and receive faxes, connect to the  
Internet, or check E-mail.  
synchronize the phone book, calendar, and to-do list with some of the  
most popular Personal Information Manager (PIM) programs on the  
market (Outlook, ACT!, Lotus Organizer, Gold Mine, etc.). Use the  
FoneSync application found on the Nokia CD-ROM in conjunction  
with your existing PIM application to keep all of your information  
up-to-date.  
For more information on connecting your phone to your PC or laptop via  
the DLR-3P, see the accompanying PC Connectivity Guide.  
For more information on synchronizing data between your phone and  
popular Personal Information Manager (PIM) programs using the DLR-3P,  
please refer to the FoneSync Getting Started brochure.  
[ 81 ]  
         
18.WAP services  
Note: This menu may not be visible if WAP services are unavailable in  
your area.  
WAP (short for Wireless Application Protocol) is to mobile devices what  
WWW (world wide web) is to computers. The mobile community began  
developing WAP in 1997 to give mobile device users access to the internet.  
Today, most WAP sites are made up of text and hyperlinks, with some sites  
capable of text input or selection items in a list. Some pages even contain  
low-resolution graphics. Because your service provider and others are free  
to design WAP sites as they choose, each site can vary almost as much as  
a web page on the Internet.  
• Services menu  
The Services menu (Menu 10) allows you to access  
special Internet content designed specifically for  
viewing from your mobile phone. You can use your  
phone’s WAP (Wireless Application Protocol)  
browser to view news, get weather reports, check  
flight times, access financial information, etc. The browser’s menu allows  
you to save addresses of WWW services as bookmarks, so you can return  
to your favorite web sites quickly and easily.  
Note: You may be required to subscribe to these additional services  
before you can use the browser. Your service provider may also  
need to configure your phone for browsing. Check with your  
service provider for more information on this feature.  
Important! Internet content received over a secure connection and  
stored in your browser's cache can be reused over non-secure  
connections. To avoid security issues, empty your browser's  
cache after each browsing session.  
[ 82 ]  
     
WAP services  
• About your service provider  
Because the WAP content is specifically designed to be viewed from your  
mobile phone, your wireless service provider now also becomes your  
"wireless Internet service provider."  
Your service provider has created a special home page for you, and configured  
your phone to take you directly to this site. There, you will find additional  
links to other wireless Web sites, providing a variety of content both  
locally, and from around the world.  
• Launching the browser  
Note: Before you can connect to the Internet, you may be required to  
subscribe to this service. Check with your wireless service provider  
for more information on WAP services.  
From the Start screen, press Menu, scroll to  
Services, and press Home. Your phone will  
attempt to connect to the wireless Internet.  
Note: If your phone displays Check service  
settings, it may not be configured to  
access the Internet. Please check with  
your service provider for wireless Internet  
settings and configuration.  
Note: Pressing  
terminates any active browser session and returns  
you to the Start screen.  
Understanding a WAP web site  
While Web sites on the World Wide Web (WWW) are thought of as a  
"book" comprised of a group of interlinked pages, WAP web sites can be  
thought of as a "deck of interlinked cards."  
Some cards are comprised of text and hyperlinks. Other cards may require  
user input (entering text or numbers, selecting items from a list, etc.).  
Some pages may even contain low-resolution graphic images.  
[ 83 ]  
           
Because your service provider (as well as WAP services providers around  
the world) are free to employ a variety of programming techniques, each  
"card" viewed could contain a variety of elements. The following section  
is designed to familiarize you with some of the most common WAP  
elements and how to get the most out of your browser.  
Understanding and navigating a WAP card  
Some of the most common card elements:  
Header line - shows current location.  
Active hyperlink - highlighted and awaiting  
action. Press the roller to select the link and  
display additional content.  
Hyperlink - used to navigate to other cards  
or sites. Scroll to select the link, then click  
the roller.  
Text - use the roller to scroll through the  
text. Cursor will automatically jump to the  
next hyperlink to activate it.  
Selection list - identified by text in  
brackets. Click this link to display additional  
choices or links.  
Options/Back - Displays a card’s options  
menu and/or the browser menu. Back takes  
you back to the previous page.  
Data entry field - identified by ellipse in  
brackets [...]. This field is used when  
specific user input is required (example: city  
name, stock symbol, airline name or flight  
number, etc.). To edit this field:  
[ 84 ]  
   
WAP services  
1. Highlight the data entry field and press the  
roller.  
2. Enter the text requested by the data entry field  
(example: Miami) and press OK.  
Note: The text you entered on the previous  
screen is displayed between the brackets.  
3. Scroll to the link that indicates an action based on your text input.  
Press the roller.  
The browser menu  
You can access the browser menu by pressing the Navi roller at the WAP  
Services menu.  
The following is a list and description of the browser menu items:  
Home - starts a browser session and takes you to your service  
provider’s home page.  
Bookmarks - displays a list of all bookmarks saved.  
Settings - displays the browser’s settings menu.  
Go to address - allows you to enter an address of your choosing.  
Clear the cache - used to empty the browser’s temporary memory  
location.  
Note: Some service providers may have customized the Services menu  
structure, placing many of the above selections under a WAP  
page’s Options menu. Please contact your service provider for  
more information, in the event that any of the above menu options  
are unavailable.  
Note: For successful browsing, it is suggested that you empty the cache  
at the end of each session.  
[ 85 ]  
   
The card Options menu  
Pressing the Options selection key while browsing a card displays the  
following menu:  
Home - takes you back to your home page from the current location.  
Bookmarks - displays a list of all bookmarks saved.  
Edit or Select - allows you to either edit the currently selected  
browser element (for example, a checklist or text entry field), or  
selects the active (highlighted) hyperlink.  
Go to address - allows you to enter an address of your choosing.  
Use Number - captures a phone number displayed on the card in  
order to place a call or add the number to the phone book.  
Empty cache - used to empty the browser’s temporary memory location.  
Exit - exits the current browser session and returns you to the  
Start screen.  
Additional menu items  
Developers of WAP web sites can also add additional Options menu items  
specific to their web site. Often times, these options are actually links to  
other decks within the web site. Use the roller to select any of the additional  
options; press the roller to view the additional content.  
• Bookmarks  
You can save the address of your favorite sites  
as bookmarks, then use the bookmarks to  
return to those sites quickly and easily. If a  
site’s programmers have included a title for  
the card, then the name of the card will appear  
in the list (example: Yahoo! News, ebay on  
WAP, Mapquest).  
[ 86 ]  
       
WAP services  
If there is no title to the card, then the site’s address will appear in  
the list of bookmarks (example: http://www.yahoo.com/news.wml,  
http://www.ebay.com/WAP/index.wml, http://www.mapquest.com/  
default.wml).  
To save a site’s address as a bookmark  
1. Navigate to the desired site, then press the Options selection key.  
2. Scroll to Bookmarks and press the roller.  
3. Press the Options selection key.  
4. Scroll to Save as bookmark and press Select.  
New bookmarks can be added manually, either while off-line, or during  
browsing.  
To save a bookmark manually  
1. From the Services menu, press the roller. Scroll to Bookmarks and  
press the roller.  
2. Press the Options selection key. Scroll to Add bookmark and press  
the roller.  
3. Enter the web site address (example: my.yahoo.com) and press OK.  
Note: It is not necessary to enter http://. This is added automatically.  
4. Enter a title for the new bookmark and press OK.  
Working with bookmarks  
You can use the bookmarks you save to return to your favorite sites  
quickly and easily.  
To return to a bookmarked site  
From the Services menu:  
1. Press the roller. Scroll to Bookmarks and press the roller.  
2. Scroll to the desired bookmark and press the roller.  
Note: If you are not currently in a browsing session, the phone will  
connect to the Internet.  
[ 87 ]  
       
Other options  
The Bookmarks options menu provides you with several options for using  
or manipulating existing bookmarks. From this menu, the following options  
are available:  
Add a bookmark - used to add a bookmark manually (while off-line  
or while browsing).  
Go to - takes you to the highlighted bookmark from the previous screen  
(the equivalent of highlighting a bookmark and pressing the roller).  
Edit - used to edit the highlighted bookmark from the previous screen.  
Erase - used to erase the highlighted bookmark from the previous screen.  
• Download a ringing tone  
You can download up to five ringing tones to your phone from some WAP  
sites, sites on the WWW, or through SMS. For more information about  
downloading ringing tones, contact your service provider.  
Play, save, or erase a ringing tone  
Once you’ve downloaded a ringing tone, your phone displays the message  
Ringing tone received.  
1. Press Options, then choose Playback, Save, or Erase.  
2. Press OK.  
If you chose to save the new ringing tone, it becomes available to you  
[ 88 ]  
       
Games  
19.Games  
Not only can you use your phone for communication but also for some  
serious fun. Your phone offers you four games from which to choose.  
In Snake II, you are to feed the snake with as many goodies as  
possible. The longer the snake’s tail grows, the higher your score.  
In Rotation, the object is to get all the numbers in sequential order as  
you rotate the numbers and move them.  
In Racket, you will play the traditional game of tennis. Use the roller  
to control the racket.  
In Opposite, try to change your opponent’s pieces into your own color.  
Warning! Do not switch on the phone when wireless phone use is  
prohibited or when it may cause interference or danger.  
Starting a new game  
1. Go to the Games menu, scroll to the desired game and press the roller.  
2. Select New game.  
Use the option Instructions to learn how to play the game. With the  
option Level you can choose the difficulty level of the game.  
In Snake you can pause the game by pressing either selection key and  
then resume a paused game with the option Continue. Use Top score  
(available in some games) to check the high score in your phone.  
Game settings  
There are two user settings for Games:  
Lights - allows you to control the lighted display (for Games menu  
only).  
Sounds - allows you to enable or disable game sounds (for Games  
menu only).  
[ 89 ]  
               
20.Network settings  
The System and Settings menu are used to change a number of settings  
related to how the phone searches for service, and to modify the phone’s  
functions and security settings.  
• Network selection  
Use the System menu (Menu 5) to change how your phone searches for  
service. The following options are available:  
Automatic - the phone automatically selects one of the wireless  
networks available in your area.  
Manual - the phone will show a list of available networks and you can  
select the desired network if this network has a roaming agreement  
with your home network operator. Otherwise the text No Access is  
displayed and another network must be selected. The phone will stay  
in manual mode until the automatic mode is selected, or when phone  
is turned off and back on again.  
New search - causes the phone to perform a new search in order to  
locate the best wireless service to use in your area.  
• Network services  
Voice privacy  
Use this menu option to enable or disable voice encryption for all calls  
(when this service is available).  
Own number selection  
Use this feature to view your own phone number, or switch between  
multiple wireless service accounts (phone numbers) programmed into  
your phone. Consult your service provider for more information on using  
this feature.  
[ 90 ]  
         
Network settings  
Network feature setting  
This menu allows you to enable or disable various network services  
(Call Forwarding, Call Waiting, Send Own Caller ID) through the use  
of special feature codes provided to you by your service provider.  
You must first store the feature code given to you by your service provider  
(unless already pre-programmed) before the feature appears in the menu  
or functions properly.  
Important! Only those menu features that have been activated will appear  
in the menu; therefore the menu shortcuts in the following sections may  
not always reflect the actual position in the menu as described below (or  
as shown on page 16).  
Storing the feature code  
1. Press Menu 4-5-3 (Settings - Network services - Network feature  
settings), then press Select.  
2. Enter the feature code for the desired feature (for example:  
to activate Call Forwarding, then press Select.  
-
-
3. To locate the type of Call Forwarding associated with the code, press  
Select, or use the Navi roller and scroll to Call waiting or Send own  
caller ID when calling, and press Select.  
4. Select the command associated with the feature code you wish to store  
(Activate, Cancel, Yes or No) and press Select to complete the process.  
Call forwarding  
This network service allows you to forward your incoming calls to another  
number (for example, your office number). For more information and  
feature codes, contact your service provider.  
Once you activate this feature by entering the proper feature code, you  
can select one of the following forwarding modes: Forward all calls,  
Forward calls if number busy, Forward calls if not answered, Forward  
calls if out of reach or phone is off, and Cancel all call forwarding. See  
“Call forwarding” on page 37 for a description of the features listed above.  
[ 91 ]  
           
Forwarding your calls  
Once you have stored the appropriate feature code for Call Forwarding  
1. Press Menu 4-5-4 (Settings - Network services - Call forwarding),  
then press Select.  
2. Scroll (if necessary) to the Call Forwarding option stored and press Select.  
3. Press Select again and enter the number to which all incoming calls  
should be forwarded, or press Findand locate a number already stored  
in your phone book.  
4. Press Select. Your phone calls the wireless system and sends the  
information you just entered. After approximately 5 seconds, the Start  
screen will reappear.  
Call waiting  
This network service lets you receive an incoming call when you’re already  
in a call. (Contact your service provider for availability.) The phone beeps  
to let you know of the incoming call while you are in an active call. Please  
If this feature is not automatically available from your service provider,  
you may have to activate it through the use of a Network Services feature  
code. See “Storing the feature code” on page 91 for instruction on storing  
the codes that activate and cancel this feature.  
Activating or cancelling Call Waiting  
1. Press Menu 4-5-5 (Settings - Network services - Call waiting),  
then press Select.  
2. Highlight either Activate or Cancel, then press Select.  
[ 92 ]  
   
Network settings  
Send own caller ID when calling  
This feature allows you to block caller ID when you call someone (your  
number will not be displayed on their caller ID). This feature works on a  
per-call basis. Contact your service provider for more details.  
This feature is only effective when calling to a number that is equipped  
with Caller ID.  
Before you can use this service, you must store the feature code in your  
code in the No option.  
Blocking your own caller ID  
1. Press Menu 4-5-6 (Settings - Network services - Send own caller  
ID when calling), and press Select.  
2. Scroll to No (to block number) and press OK.  
3. Enter the number you wish to call (or press Find to retrieve the  
number from the phone book and press OK), then press Select.  
4. Your phone will attempt to call this number with the feature code you  
stored in Menu 4-5-6.  
Call mode  
In certain wireless networks, the Call mode submenu option may be  
visible under the Settings - Network services menu. The following Call  
mode options are available:  
Analog - the phone uses an analog channel to place the call. If an  
analog channel is not available, the call may still be placed using a  
digital channel. This feature depends on your network.  
Digital - the phone uses a digital channel to place the call. If a digital  
channel is not available, the call may still be placed using an analog  
channel. This feature depends on your network.  
Analog & digital - the phone uses both digital and analog channels.  
[ 93 ]  
       
Public system setting  
In certain wireless networks, the Public system settings sub-menu option  
may be visible under the Settings - Network services menu. The following  
Public system settings are available:  
Any system - causes the phone to search for and use any available  
home type system, followed by non-home type system (in the event  
that your service provider’s network is unavailable).  
Home type - causes the phone to use only a home type system (in the  
event that your service provider’s network is unavailable).  
Non-home type - causes the phone to use only a non-home type  
system (in the event that your service provider’s network is unavailable).  
Home only - causes the phone to use only your service provider’s  
network.  
Depending on the roaming agreements between service providers, you  
may be able to save money by "forcing" your phone to use certain networks  
when outside your service provide’s area of coverage. Contact your service  
provider for more information on this feature.  
[ 94 ]  
   
Accessories  
21. Accessories  
If you want to enhance your phone’s functionality, an extensive range of  
accessories is available for you. You can select any of these items to help  
accommodate your specific communication needs. For availability of these  
and other accessories, contact your service provider.  
A few practical rules for accessory operation:  
Keep all accessories out of reach of small children.  
When you disconnect the power cord of any accessory, grasp and pull  
the plug, not the cord.  
Check regularly that any vehicle-installed accessories are mounted and  
are operating properly.  
Installation of any complex car accessories must be made by qualified  
personnel only.  
Note: Use only batteries, chargers and accessories approved by the  
phone manufacturer for use with this particular phone model.  
The use of any other types may invalidate any approval or warranty  
applying to the phone, and may be dangerous.  
battery usage information.  
Note: For availability of approved accessories, please check with your  
authorized Nokia dealer.  
[ 95 ]  
   
• Batteries  
A variety of Nokia battery options are available for your phone. Each  
battery provides you with the performance, quality and convenience  
you’ve come to expect with your Nokia phone.  
Charging Times  
The following table shows the battery options that are available for your  
phone. The charging times with the Rapid Travel Charger (ACP-8U), the  
Rapid Cigarette Lighter Charger (LCH-9), and the Standard Travel Charger  
(ACP-7U) are listed beside each option.  
Note: The times displayed below are approximate and will allow your  
battery to obtain approximately 90% of its capacity. At this time,  
the battery scroll bars on your phone’s display will stop scrolling.  
To obtain 100% battery capacity for all batteries except BMS-2V,  
allow another two hours to “trickle” or “maintenance” charge.  
Handsfree  
Standard  
Travel Charger  
ACP-7U  
Rapid Travel  
Charger  
ACP-8U  
Rapid Cigarette  
Lighter Charger  
LCH-9  
Desktop  
Charger  
Batteries  
DCH-12K  
Ultra Slim Li-Polymer  
Battery 600 mAh  
(BPS-1)  
2h30m  
4h  
1h30m  
2h  
1h25m  
2h  
1h25m  
2h  
Extended Li-Ion Battery  
900 mAh  
(BLS-2S/BLS-2N)  
Extended NiMH Battery  
900 mAh  
4h  
2h  
1h30m  
1h30m  
3h30m  
1h30m  
1h30m  
3h30m  
(BMS-2S)  
Extended NiMH Vibrating  
Battery 900 mAh  
(BMS-2V)  
4h  
2h  
Ultra Extended Li-Ion  
Battery 1500 mAh  
(BLS-4)  
5-6h  
4h  
[ 96 ]  
       
Accessories  
Standby and Talk Times  
The times shown in the following table are approximate, and represent a  
range for either standby or talk times (not a combination of both). Battery  
operation times vary according to signal conditions, network parameters  
set by the service provider, and how you use your phone.  
Warning! Dispose of used batteries in accordance with any local  
regulations.  
Please refer to the following table for more information on talk and  
standby times in both digital and analog networks:  
Battery  
Option  
Digital  
Talk Time  
Analog  
Talk Time  
Standby  
Time  
Digital  
Analog  
Ultra Slim Li-Polymer  
Battery 600 mAh  
(BPS-1)  
1h to 2h40m  
2h to 4h30m  
2h to 4h30m  
2h to 4h30m  
35m to 1h30m  
1h to 2h30m  
1h to 2h30m  
1h to 2h30m  
2.5 to 6 days  
4 to 10 days  
4 to 10 days  
4 to 10 days  
18h to 30h  
Extended Li-Ion Battery  
900 mAh  
(BLS-2S/BLS-2N)  
30h to 50h  
30h to 50h  
30h to 50h  
Extended NiMH Battery  
900 mAh  
(BMS-2S)  
Extended NiMH  
Vibrating  
Battery 900 mAh  
(BMS-2V)  
Ultra Extended Li-Ion  
Battery 1500 mAh  
(BLS-4)  
3h to 7h30m  
1h40m to 4h  
6.5 to 16.5 days  
50h to 83h  
[ 97 ]  
   
Chargers and Other Accessories  
The following chargers and charging accessories are available for your  
phone; please see your dealer for details. Also, refer to the accessories  
brochure that was included in your sales package for the entire line of  
Nokia Original Accessories.  
Rapid Travel Charger (ACP-8U)  
This lightweight AC charger can be used with all battery  
options. Calls can be made during charging, even with a  
fully discharged battery.  
To use the Rapid Travel Charger (ACP-8U), first plug the  
lead with the arrow into the transformer. Twist the lead  
1/4 turn to lock it in place. Then connect the lead from  
the charger to the base of your phone. Finally, plug the  
charger into a standard 120V AC wall outlet.  
The charger can also be used together with the optional  
Compact Desktop Charging Stand (DCH-8 or DCH-9). Approximate charging  
times for discharged batteries are shown at the beginning of this section.  
Standard Travel Charger (ACP-7U)  
Use this durable and economical charger to charge  
all battery options. Plug the connector into the  
bottom of your phone, then plug the charger into  
a wall outlet. Check the charging status on the  
phone display.  
Note: If the battery is completely empty, you  
cannot use the phone until it has enough  
charge to operate.  
The Standard Travel Charger is available for different voltage levels and  
can also be used with the DCH-9 Compact Desktop Charging Stand.  
[ 98 ]  
   
Accessories  
Rapid Cigarette Lighter Charger (LCH-9)  
You can charge your phone’s battery  
from your vehicle battery by using the  
Rapid Cigarette Lighter Charger (LCH-9).  
Calls are possible during charging.  
A green light indicates the charger is  
ready for charging. The battery charging  
times are shown at the beginning of this section.  
The input voltage range is from 11 to 32V DC, negative grounding. Avoid  
prolonged charging with the Rapid Cigarette Lighter Charger (LCH-9) when  
the car engine is not running; this may cause the battery of your car to  
drain. Note also that in some cars the cigarette lighter plug is not provided  
with electricity if the ignition is not switched on.  
Compact Desktop Charging Stand (DCH-9)  
Usedtogether with theStandard Travel Charger  
(ACP-7U)or the Rapid Travel Charger (ACP-8U),  
the Compact Desktop Charging Stand (DCH-9)  
is an economical choice when you need to  
charge your phone and/or a spare battery.  
With the battery still attached, place your  
phone in the charging stand to begin charging your phone’s battery.  
Compact Desktop Charging Stand (DCH-8)  
Used together with the Standard Travel  
Charger (ACP-7U) or the Rapid Travel Charger  
(ACP-8U), the Compact Desktop Charging  
Stand (DCH-8) is an economical choice when  
you need your phone close at hand.  
[ 99 ]  
Hands-free desktop charging stand kit (DCH-12K)  
This hands-free desktop charging  
stand kit consists of the (DCH-12)  
(Handsfree Desktop Charging  
Stand) and the (ACS-6U) AC  
Adapter. The (DCH-12K) provides  
the same charging times as the  
(LCH-9) Rapid Cigarette Lighter  
Charger, and allows for handsfree usage of the phone via the stand's built  
in speaker and microphone. The phone uses the Handsfree profile when in  
the charging stand. You can use either voice dialing or use the Phone book  
menu to dial a call (as the keypad is not accessible while in the stand).  
[ 100 ]  
Troubleshooting  
22.Troubleshooting  
Problem  
Possible cause  
Possible solution  
Charger and phone are  
not properly connected. between charger and  
phone/charger stand  
Check connection  
My phone isn’t  
charging.  
and phone.  
Charger is not properly  
plugged in.  
Make sure charger is  
properly plugged into  
wall outlet.  
Battery is not charged.  
Poor signal strength  
Charge the battery.  
My phone isn’t  
making/answering  
calls.  
If you are indoors, move  
toward a window.  
Outside of service area.  
Change locations until  
the phone displays  
service available.  
You don’t have voice  
mail service.  
Call your wireless  
service provider.  
I can’t listen to my  
voice messages.  
You have not set up  
your voice mailbox with  
your service provider.  
Call your wireless  
service provider.  
You have not saved your See page 32.  
voice mail number in  
your phone.  
The voice mail number  
you have saved is  
incorrect.  
Call your wireless  
service provider.  
You have forgotten your Call your wireless  
password or are entering service provider.  
it incorrectly.  
[ 101 ]  
 
Problem  
Possible cause  
Possible solution  
You don’t have SMS  
service.  
Call your wireless  
service provider.  
My SMS messages  
are not being  
delivered.  
Excessive background  
noise during the  
recording process.  
Find a quiet location  
and try again.  
I can’t successfully  
tag a phone book  
entry.  
Voice tag memory is  
full.  
Follow screen prompt to  
erase an existing tag,  
making room for new  
voice tag.  
Voice tag was recorded  
by someone other than  
yourself.  
Re-record voice tag  
using your voice.  
Voice dialing will  
not recognize my  
voice.  
[ 102 ]  
Frequently Asked Questions (FAQ)  
23.Frequently Asked  
Questions (FAQ)  
This section lists and answers the questions that you most frequently ask.  
Where necessary, the answers refer you to the appropriate text within  
this guide.  
Note: Some of the answers tell you to use menu shortcuts. For a complete  
listing of these shortcuts, refer to “List of main menu functions” on  
Q. How do I lock my phone?  
A. Press Menu 4-4-2-1, press Select, enter your lock code, scroll to On,  
and press OK.  
Refer to “Lock code” on page 59 for more information.  
Q. How do I unlock my phone?  
A. Press Menu 4-4-2-1, press Select, enter your lock code, scroll to Off,  
and press OK.  
Refer to “Lock code” on page 59 for more information.  
Q. What is my lock code?  
A. The lock code enables you to lock your phone, thus preventing someone  
else from using it. The default lock code is 1234. However, it is suggested  
that you change this code immediately.  
Refer to “Lock code” on page 59 for more information.  
Q. What is my security code?  
A. The default security code is 12345. However, it is suggested that you  
change this code immediately. Certain features can be used only after  
the correct security code has been successfully entered.  
code” on page 58 for more information.  
[ 103 ]  
 
Q. How do I lock the keypad?  
A. There are three ways you can lock the keypad:  
Press Menu, scroll to Keyguard and press the roller.  
Press Menu followed by  
Close the slide, then press the Lock keys selection key.  
.
Refer to “Keypad lock (Keyguard)” on page 56 for more information.  
Q. How do I unlock the keypad?  
A. There are three ways you can unlock the keypad:  
Press Unlock and OK.  
Press Unlock, followed by  
Open the sliding cover.  
.
Refer to “Keypad lock (Keyguard)” on page 56 for more information.  
Q. How do I make the ringing louder?  
A. Press Menu 3-1-2-3, press Select, then choose a volume level.  
Refer to “Ringing volume” on page 51 for more information.  
Q. How do I change the ringing tone?  
A. Press Menu 3 and scroll through the list of profiles until you find the  
one for which you want to set the ringing tone, then press Options.  
Highlight Customize and press OK.  
Scroll to Ringing tones, then press Select.  
Scroll through the options. After you hear the tone you want to use,  
press OK.  
Refer to “Ringing tone” on page 51 for more information.  
Q. How do I store my voice mailbox number?  
A. Press Menu 1-4-2, enter your voice mailbox phone number, and press  
OK. The screen tells you that the number is saved.  
[ 104 ]  
Frequently Asked Questions (FAQ)  
This voice mailbox number is valid unless your phone number changes.  
If your phone number changes, you will have to save a new voice  
mailbox number.  
Refer to “Setting up your voice mailbox” on page 32 for more information.  
Q. How do I call my voice mailbox number (retrieve voice messages)?  
When your phone alerts you to new voice messages, press Listen and  
follow the prompts. If you’d rather listen to your messages later,  
press Exit.  
To listen to your voice messages at a later time, perform one of the  
following actions:  
Press and hold the  
key.  
Press Menu 1-2-1. The message Calling voice mailbox appears  
on the screen. Follow the prompts to access your messages.  
Q. How do I find my phone’s model number?  
A. Turn your phone off, then remove the battery from the back of the  
phone. Your phone’s model number is printed on the sticker that is on  
the rear cover, and is labeled, "Model."  
Q. How do I redial the last-dialed number.  
A. Press  
in two quick successions.  
Refer to “Last number redial” on page 21 for more information.  
Q. How do I assign a key to 1-touch dialing?  
A. Press Names and scroll to 1-touch dialing.  
Press Select.  
Scroll to the first number that includes the message (empty) and  
press Assign.  
Scroll to the name/number to which you want to assign to this key  
and press Select.  
Repeat these steps as many times as necessary.  
Refer to “Setting up 1-touch dialing” on page 44 for more information.  
[ 105 ]  
Q. How do I find out how many memory locations the phone has?  
A. Press Names and scroll to Options.  
Press Select.  
Scroll to Memory status and press Select again. A message appears  
that says Phone: xx free, xx in use where xx indicates the percent of  
memory used.  
For more information, refer to “Memory status” on page 49 and  
Q. How do I find my phone’s ESN (electronic serial number)?  
A. Turn your phone off, then remove the battery from the back of the  
phone. Your phone’s ESN number is printed on the sticker that is on  
the rear cover, and is labeled, "ESN."  
Q. How can I change the contrast of my phone’s display?  
A. Press Menu 4-3-5 and press Select. Use the roller to adjust the  
contrast, then press OK (or the roller).  
For more information, refer to “Display contrast” on page 53.  
Q. How do I clear my call timers?  
A. WARNING: The clearing of call timers cannot be undone.  
Press Menu 2-5-4 and press OK. Enter your security code and  
press OK.  
Refer to “Clear call timers” on page 31 for more information.  
[ 106 ]  
Glossary  
24.Glossary  
Term:  
Definition:  
analog network  
A network where the signal is conveyed by varying the  
frequency, amplitude or phase of the transmission.  
The portion of your phone designed to transmit and  
receive the wireless signal.  
antenna  
The connector used to attach an external antenna to  
your mobile phone (typically used by the CARK-91US  
car kit).  
antenna jack  
battery  
The source of power for your mobile phone when the  
phone is not connected to a charger.  
bookmark  
A way to save a web site address (or URL) to your phone’s  
memory. Use bookmarks to store the addresses of your  
favorite web sites, then recall them so you can return to  
the location quickly and easily.  
browser  
A software program used to view and navigate a portion  
of the Internet called the World Wide Web, or Internet  
locations developed for the Wireless Application Protocol  
(WAP).  
data call  
A call in which your Nokia phone functions as a data/fax  
modem, connected to your PC via the DLR-3P cable or  
infrared port.  
digital network  
earpiece  
Network where the signal is converted to a digital or  
binary code before transmission.  
The portion of your phone that contains the speaker.  
Used to play the audio portion of a voice call as well  
as any other audible tones (for example: ringing,  
warning, etc.).  
[ 107 ]  
 
Term:  
Definition:  
The sound level of the earpiece’s speaker during a call.  
earpiece volume  
E-mail  
Electronic Mail. A written form of communication in  
which text (and other types of information) is transmitted  
between recipients electronically via special electronic  
mail systems managed by corporations and/or Internet  
service providers.  
Used to terminate an active call or reject an incoming  
call. Also used to return to the Start screen from the  
phone book or from within the phone’s menu.  
END key  
Electronic Serial Number. Used by wireless service providers  
to identify your phone on the wireless network.  
ESN  
A call in which your Nokia phone functions as a data/fax  
modem, connected to your PC via the DLR-3P cable or  
infrared port.  
fax call  
Refers to the wireless system to which you are subscribed.  
home system  
Refers to the same type of system to which you are  
subscribed, but a system that is not your primary home  
system.  
home type  
system  
An elaborate system of interconnected public and private  
computer networks around the world, used to provide  
access to information and enable communication  
between users worldwide.  
Internet  
The sound heard when a key on your phone’s keypad  
is pressed.  
keypad tones  
The sounds that are heard upon receipt of a text or system  
message (e.g. call waiting notification) by your phone.  
message alert  
tone  
The electronic element in the base of your phone that  
picks up your voice and other sounds.  
microphone  
[ 108 ]  
Glossary  
Term:  
Definition:  
A term that refers to the act of moving from one Internet  
site or page to another, or to the act of moving from one  
area of your phone’s memory or menu to another.  
navigate  
Any system that does not use the same wireless "format"  
as your home system.  
non-home type  
system  
The numbered keys on your phone’s keypad.  
number keys  
power key  
A key on the front of the phone that allows you to turn  
the phone on or off. This key can also be used to recall  
and switch your phone’s profiles.  
A system developed for rapid text entry using your  
phone’s keypad.  
predictive text  
input  
Refers to a system that is the same "format" as your home  
system, but is not the system to which you have subscribed.  
preferredsystem  
ringing option  
profile  
Refers to the way your phone plays (or if it plays) a  
ringing tone when you have an incoming call.  
Refers to the various settings relating to your phone’s  
audible, visible and vibrating alerts, and the ability to have  
multiple configurations to match your location or  
environment.  
The tone or melody that is heard when you have an  
incoming call.  
ringing tone  
Refers to the volume of your phone’s ringing tone.  
ringing volume  
roaming  
The state of your phone when you are no longer in your  
home system. Additional charges may result.  
A multi-function key on the front of the phone. Roll the  
roller to scroll through your phone’s menus and phone  
book. Press the roller to make a selection or to access the  
phone book.  
roller  
[ 109 ]  
Term:  
Definition:  
Your phone’s display.  
screen  
scroll  
To move through a list of names, menu items, etc. by  
rolling the roller up or down. Each new selection or  
option is highlighted as you roll to it.  
Refers to the keys under the lower left and lower right  
corners of your phone’s screen.  
selection keys  
slide  
The moving keypad cover, used to protect the keypad as  
well as answer and end calls.  
Short Message Service. A service whereby you can send  
and receive short text messages (typically around 150  
characters) with your phone.  
SMS  
Another way to refer to your wireless service provider’s  
wireless network.  
system  
The key used to make or answer a call.  
See SMS.  
TALK key  
text message  
URL  
Universal Resource Locator. A URL is a Web site’s specific  
address or location on the Internet (for example:  
http://www.nokia.com).  
The ability to dial numbers in your phone using the  
phone’s voice recognition feature. (see voice tags)  
voice dialing  
voice mail  
A system maintained by your service provider, used to  
record voice messages when you are unable to answer  
a call.  
The location on your service provider’s network used to  
store voice mail messages.  
voice mailbox  
[ 110 ]  
Glossary  
Term:  
Definition:  
A recording of a user’s voice that is assigned to a phone  
book entry. Voice tag is used in conjunction with voice  
dialing feature (see voice dialing).  
voice tag  
See earpiece volume or ringing volume.  
volume  
The tone played when your phone displays a warning, or  
those tones that are heard when you are playing one of  
the phone’s games.  
warning tones,  
game tones  
Wireless Application Protocol. WAP is a new section of  
the Internet designed to provide information and services  
to you, and viewable from your mobile phone’s screen.  
WAP  
Your service provider’s operating environment, including  
various types of hardware, software, and landline  
connections, which makes wireless calls possible.  
wirelessnetwork  
World Wide Web  
The part of the Internet that is viewed using a special  
software application called a web browser. The browser  
in your Nokia phone can access many sites on the World  
Wide Web, as well as sites designed specifically to be  
browsed from a mobile phone (see WAP).  
See World Wide Web.  
WWW  
[ 111 ]  
25.Reference information  
• Using batteries and chargers  
For charging and recharging your phone battery, see “Charge your battery”  
Use only batteries approved by the phone manufacturer and recharge your  
battery only with the chargers approved by the manufacturer.  
A new battery's full performance is achieved only after two or three complete  
charge and discharge cycles!  
The battery can be charged and discharged hundreds of times but it will  
eventually wear out. When the operating time (talk-time and stand-by  
time) is noticeably shorter than normal, it is time to buy a new battery.  
When a charger is not in use, disconnect it from the power source. Do not  
leave the battery connected to a charger for longer than a week, since  
overcharging may shorten its life. If left unused a fully charged battery  
will discharge itself over time.  
For good operation times, discharge NiMH batteries from time to time by  
leaving your phone switched on until it turns itself off (or by using the  
battery discharge facility of any approved accessory available for your  
phone). Do not attempt to discharge the battery by any other means.  
Temperature extremes will affect the ability of your battery to charge:  
allow it to cool down or warm up first.  
When the battery is running out of power and only few minutes of talk  
time remain, a warning tone is heard and Battery low is briefly displayed.  
When no more talk time is left, the phone will beep three times andRecharge  
battery is displayed. The phone then switches itself off.  
Use the battery only for its intended purpose.  
Never use any charger or battery which is damaged or worn out.  
[ 112 ]  
     
Reference information  
Do not short-circuit the battery. Accidental short-circuiting can occur when  
a metallic object (coin, clip or pen) causes direct connection of the + and -  
terminals of the battery (metal strips on the back of the battery) for example  
when you carry a spare battery in your pocket or purse. Short-circuiting  
the terminals may damage the battery or the connecting object.  
Leaving the battery in hot or cold places, such as in a closed car in summer  
or winter conditions, will reduce the capacity and lifetime of the battery.  
Always try to keep the battery between 59° F and 77° F (15° C and 25° C).  
A phone with a hot or cold battery may temporarily not work, even when  
the battery is fully charged. NiMH batteries performance is particularly  
limited in temperatures below 14° F (-10°C). Li-Ion batteries performance  
is particularly limited in temperatures below 32° F (0° C).  
Batteries must be recycled or disposed of properly. Must not be disposed  
of in municipal waste.  
Do not dispose of batteries in fire!  
• Accessories and batteries  
Warning!  
Check the model number of any charger before use with this  
apparatus. This apparatus is intended for use when supplied with  
power from the Standard Travel Charger (ACP-7U), Rapid Travel  
Charger (ACP-8U), Handsfree Desktop Charging Kit (DCH-12K),  
or Rapid Cigarette Lighter Charger (LCH-9). Other usage may  
invalidate any warranty, will invalidate approval of this  
apparatus, and may be dangerous.  
Note: This apparatus is NOT approved for use with the ACP-9U Rapid  
Travel Charger.  
For availability of approved accessories, please check with your dealer.  
When you disconnect the power cord of any accessory, grasp and pull the  
plug, not the cord.  
[ 113 ]  
   
• Important Safety Information  
Traffic Safety  
Do not use a hand-held telephone while driving a vehicle. If using a hand-  
held phone park the vehicle before conversing.  
Always secure the phone in its holder; do not place the phone on the  
passenger seat or where it can break loose in a collision or sudden stop.  
The use of an alert device to operate a vehicle’s lights or horn on public  
roads is not permitted.  
Remember, road safety always comes first!  
Operating Environment  
Remember to follow any special regulations in force in any area and  
always switch off your phone whenever it is forbidden to use it, or when  
it may cause interference or danger.  
When connecting the phone or any accessory to another device, read its  
user’s guide for detailed safety instructions. Do not connect incompatible  
products.  
As with other mobile radio transmitting equipment, users are advised that  
for the satisfactory operation of the equipment and for the safety of  
personnel, it is recommended that the equipment should only be used in  
the normal operating position (held to your ear with the antenna pointing  
over your shoulder).  
Electronic Devices  
Most modern electronic equipment is shielded from radio frequency (RF)  
signals. However, certain electronic equipment may not be shielded  
against the RF signals from your wireless phone.  
[ 114 ]  
         
Reference information  
Pacemakers  
Pacemaker manufacturers recommend that a minimum separation of  
6 inches (15 cm) be maintained between a handheld wireless phone and  
a pacemaker to avoid potential interference with the pacemaker. These  
recommendations are consistent with the independent research by and  
recommendations of Wireless Technology Research. Persons with pacemakers:  
Should always keep the phone more than 6 inches (15 cm) from their  
pacemaker when the phone is switched on;  
Should not carry the phone in a breast pocket;  
Should use the ear opposite the pacemaker to minimize the potential  
for interference.  
If you have any reason to suspect that interference is taking place,  
switch off your phone immediately.  
Hearing Aids  
Some digital wireless phones may interfere with some hearing aids. In the  
event of such interference, you may want to consult your service provider.  
Other Medical Devices  
Operation of any radio transmitting equipment, including cellular phones,  
may interfere with the functionality of inadequately protected medical  
devices. Consult a physician or the manufacturer of the medical device to  
determine if they are adequately shielded from external RF energy or if  
you have any questions. Switch off your phone in health care facilities  
when any regulations posted in these areas instruct you to do so. Hospitals  
or health care facilities may be using equipment that could be sensitive  
to external RF energy.  
Vehicles  
RF signals may affect improperly installed or inadequately shielded electronic  
systems in motor vehicles (e.g. electronic fuel injection systems, electronic  
anti-skid (anti-lock) braking systems, electronic speed control systems, air  
bag systems). Check with the manufacturer or its representative regarding  
your vehicle. You should also consult the manufacturer of any equipment  
that has been added to your vehicle.  
[ 115 ]  
Posted Facilities  
Switch your phone off in any facility where posted notices so require.  
Potentially Explosive Atmospheres  
Switch off your phone when in any area with a potentially explosive  
atmosphere and obey all signs and instructions. Sparks in such areas could  
cause an explosion or fire resulting in bodily injury or even death.  
Users are advised to switch off the phone while at a refueling point  
(service station). Users are reminded of the need to observe restrictions on  
the use of radio equipment in fuel depots (fuel storage and distribution  
areas), chemical plants or where blasting operations are in progress.  
Areas with a potentially explosive atmosphere are often but not always  
clearly marked. They include below deck on boats; chemical transfer or  
storage facilities; vehicles using liquefied petroleum gas (such as propane  
or butane); areas where the air contains chemicals or particles, such as  
grain, dust or metal powders; and any other area where you would normally  
be advised to turn off your vehicle engine.  
Vehicles  
Only qualified personnel should service the phone, or install the phone in  
a vehicle. Faulty installation or service may be dangerous and may invalidate  
any warranty which may apply to the unit.  
Check regularly that all wireless phone equipment in your vehicle is mounted  
and operating properly.  
Do not store or carry flammable liquids, gases or explosive materials in the  
same compartment as the phone, its parts or accessories.  
For vehicles equipped with an air bag, remember that an air bag inflates  
with great force. Do not place objects, including both installed or portable  
wireless equipment, in the area over the air bag or in the air bag deployment  
area. If in-vehicle wireless equipment is improperly installed and the air  
bag inflates, serious injury could result.  
[ 116 ]  
   
Reference information  
Switch off your phone before boarding an aircraft. The use of wireless  
telephones in an aircraft may be dangerous to the operation of the aircraft,  
disrupt the wireless telephone network and may be illegal.  
Failure to observe these instructions may lead to the suspension or denial  
of telephone services to the offender, or legal action, or both.  
• Emergency Calls  
IMPORTANT!  
This phone, like any wireless phone, operates using radio signals,  
wireless and landline networks as well as user- programmed  
functions which cannot guarantee connection in all conditions.  
Therefore, you should never rely solely upon any wireless phone  
for essential communications (e.g. medical emergencies).  
Remember, to make or receive any calls the phone must be switched  
on and in a service area with adequate signal strength. Emergency  
calls may not be possible on all wireless phone networks or when  
certain network services and/or phone features are in use. Check  
with local service providers.  
Making an Emergency Call  
1. If the phone is not on, switch it on.  
2. If the word Clear appears above right selection key, press and hold the  
selection key to clear the display.  
3. Key in the emergency number for your present location (e.g. 911 or  
other official emergency number). Emergency numbers vary by location.  
4. Press  
.
Note: If certain features are in use (Keyguard, call restrictions, etc.), you  
may first need to turn those features off before you can make an  
emergency call. Consult this document and your local service  
provider for more information.  
[ 117 ]  
         
When making an emergency call, remember to give all the necessary  
information as accurately as possible. Remember that your wireless phone  
may be the only means of communication at the scene of an accident—  
do not cut off the call until given permission to do so.  
• Radio Frequency (RF) Signals  
THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR  
EXPOSURE TO RADIO WAVES.  
Your wireless phone is a radio transmitter and receiver. It is designed  
and manufactured not to exceed the emission limits for exposure to  
radiofrequency (RF) energy set by the Federal Communications Commission  
of the U.S. Government. These limits are part of comprehensive guidelines  
and establish permitted levels of RF energy for the general population. The  
guidelines are based on standards that were developed by independent  
scientific organizations through periodic and thorough evaluation of  
scientific studies. The standards include a substantial safety margin designed  
to assure the safety of all persons, regardless of age and health.  
The exposure standard for wireless mobile phones employs a unit of  
measurement known as the Specific Absorption Rate, or SAR. The SAR  
limit set by the FCC is 1.6 W/kg.* Tests for SAR are conducted using standard  
operating positions accepted by the FCC with the phone transmitting at  
its highest certified power level in all tested frequency bands. Although  
the SAR is determined at the highest certified power level, the actual SAR  
level of the phone while operating can be well below the maximum value.  
This is because the phone is designed to operate at multiple power levels  
so as to use only the power required to reach the network. In general, the  
closer you are to a wireless base station antenna, the lower the power output.  
[ 118 ]  
 
Reference information  
Before a phone model is available for sale to the public, it must be tested  
and certified to the FCC that it does not exceed the limit established by  
the government-adopted requirement for safe exposure. The tests are  
performed in positions and locations (e.g., at the ear and worn on the  
body) as required by the FCC for each model. The highest SAR values, as  
reported to the FCC for this model phone are:  
1.23 W/kg when tested for use at the ear, and  
0.86 W/kg when worn on the body (as described in this user guide)  
While there may be differences between the SAR levels of various phones  
and at various positions, they all meet the government requirement.  
The FCC has granted an Equipment Authorization for this model phone  
with all reported SAR levels evaluated as in compliance with the FCC RF  
exposure guidelines. SAR information on this model phone is on file  
with the FCC and can be found under the Display Grant section of  
http://www.fcc.gov/oet/fccid after searching on FCC ID LJPNSW-5NY.  
For body worn operation, to maintain compliance with FCC RF exposure  
guidelines, use only Nokia approved accessories. When carrying the phone  
while it is on, attach the phone to the Belt Clip (BCH-12U) or place the  
phone in the Carrying Case (CSL-5). These accessories have been tested  
for compliance.  
Use of non-Nokia-approved accessories may violate FCC RF exposure  
guidelines and should be avoided.  
________________________________________________________  
*In the United States and Canada, the SAR limit for mobile phones used by the public  
is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates  
a substantial margin of safety to give additional protection for the public and to  
account for any variations in measurements.  
[ 119 ]  
• Care and Maintenance  
Your phone is a product of superior design and craftsmanship and  
should be treated with care. The suggestions below will help you to  
fulfill any warranty obligations and allow you to enjoy this product for  
many years. When using your phone, battery, charger, OR any accessory:  
Keep it and all its parts and accessories out of small children’s reach.  
Keep it dry. Precipitation, humidity and liquids contain minerals that  
will corrode electronic circuits.  
Do not use or store it in dusty, dirty areas as its moving parts can be  
damaged.  
Do not store it in hot areas. High temperatures can shorten the life of  
electronic devices, damage batteries, and warp or melt certain plastics.  
Do not store it in cold areas. When the phone warms up (to its normal  
operating temperature), moisture can form inside the phone, which  
may damage the phone's electronic circuit boards.  
Do not attempt to open it. Non-expert handling of the device may  
damage it.  
Do not drop, knock or shake it. Rough handling can break internal  
circuit boards.  
Do not use harsh chemicals, cleaning solvents, or strong detergents to  
clean it. Wipe it with a soft cloth slightly dampened in a mild soap-  
and-water solution.  
Do not paint it. Paint can clog the device’s moving parts and prevent  
proper operation.  
Use only the supplied or an approved replacement antenna. Unauthorized  
antennas, modifications or attachments could damage the phone and  
may violate regulations governing radio devices.  
If the phone, battery, charger, or any accessory is not working properly,  
take it to your nearest qualified service facility. The personnel there  
will assist you, and if necessary, arrange for service.  
[ 120 ]  
 
Technical information  
26.Technical information  
Wireless networks  
Dual band/tri-mode TDMA and AMPS  
4.9 oz. (139 g); With BLS-2S, 5.0 oz. (141 g)  
7.6 cu. in. (125 cc)  
Weight  
Size  
Dimensions:  
Length:  
Width:  
4.9 in / 125 mm (min)  
7.2 in / 185 mm (max)  
2.1 in / 53 mm (max)  
Frequency range:  
Lowband  
Highband  
824.04 - 848.97 MHz (TX)  
869.04 - 893.97 MHz (RX)  
1850.04 - 1909.92 MHz (TX)  
1930.08 - 1989.96 MHz (RX)  
Transmitting power  
Battery voltage  
up to 600 mW nominal  
3.6 V nominal  
Charging current  
750 mAh max.  
Operating temperature  
Number of channels:  
Number of NAMs  
Memory locations:  
-4°F to + 104°F (-20°C to + 40°C)  
832 lowband, 1997 highband  
3
Phone book:  
up to 1000 entries with  
up to 5 numbers per name  
up to 660 entries  
up to 100 entries  
up to 100  
Calendar:  
To-do list:  
Text messages:  
Memory capacity:  
Digital data:  
Phone book-alpha: 50 characters per location  
Phone book-num: 32 digits per location  
Calendar:  
To-do list:  
48 characters per note  
40 characters per note  
Data call:  
Fax call:  
9600bps  
9600bps, Class 2.0  
[ 121 ]  
   
27.Nokia One-Year  
Limited Warranty  
Nokia Inc. (“Nokia”) warrants that this cellular phone (“Product”) is free  
from defects in material and workmanship that result in Product failure  
during normal usage, according to the following terms and conditions:  
1. The limited warranty for the Product extends for ONE (1) year beginning  
on the date of the purchase of the Product.  
2. The limited warranty extends to the original purchaser of the Product  
(“Consumer”) and is not assignable or transferable to any subsequent  
purchaser/end-user.  
3. The limited warranty extends only to Consumers who purchase the  
Product in the United States.  
4. During the limited warranty period, Nokia will repair, or replace, at  
Nokia's option, any defective parts, or any parts that will not properly  
operate for their intended use with new or factory rebuilt replacement  
items if such repair or replacement is needed because of product malfunction  
or failure during normal usage. No charge will be made to the Consumer  
for any such parts. Nokia will also pay for the labor charges incurred by  
Nokia in repairing or replacing the defective parts. The limited warranty  
does not cover defects in appearance, cosmetic, decorative or structural  
items, including framing, and any non-operative parts. Nokia's limit of  
liability under the limited warranty shall be the actual cash value of the  
Product at the time the Consumer returns the Product for repair, determined  
by the price paid by the Consumer for the Product less a reasonable amount  
for usage. Nokia shall not be liable for any other losses or damages. These  
remedies are the Consumer’s exclusive remedies for breach of warranty.  
5. Upon request from Nokia, the Consumer must prove the date of the  
original purchase of the Product by a dated bill of sale or dated itemized  
receipt.  
[ 122 ]  
   
Nokia One-Year Limited Warranty  
6. The Consumer shall bear the cost of shipping the Product to Nokia in  
Melbourne, Florida. Nokia shall bear the cost of shipping the Product back  
to the Consumer after the completion of service under this limited warranty.  
7. The Consumer shall have no coverage or benefits under this limited  
warranty if any of the following conditions are applicable:  
a) The Product has been subject to abnormal use, abnormal conditions,  
improper storage, exposure to moisture or dampness, unauthorized  
modifications, unauthorized connections, unauthorized repair, misuse,  
neglect, abuse, accident, alteration, improper installation, or other acts  
which are not the fault of Nokia, including damage caused by shipping.  
b) The Product has been damaged from external causes such as collision  
with an object, or from fire, flooding, sand, dirt, windstorm, lightning,  
earthquake or damage from exposure to weather conditions, an Act of  
God, or battery leakage, theft, blown fuse, or improper use of any electrical  
source, or damage caused by the connection to other products not  
recommended for interconnection by Nokia.  
c) Nokia was not advised by the Consumer in writing of the alleged defect  
or malfunction of the Product within fourteen (14) days after the expiration  
of the applicable limited warranty period.  
d) The Product serial number plate or the accessory data code has been  
removed, defaced or altered.  
e) The defect or damage was caused by the defective function of the  
cellular system, by inadequate signal reception by the external antenna,  
or by viruses or other software problems introduced into the Product.  
8. Nokia does not warrant uninterrupted or error-free operation of the  
Product. If a problem develops during the limited warranty period, the  
Consumer shall take the following step-by-step procedure:  
a) The Consumer shall return the Product to the place of purchase for  
repair or replacement processing.  
[ 123 ]  
b) If “a” is not convenient because of distance (more than 50 miles) or for  
other good cause, the Consumer shall ship the Product prepaid and  
insured to:  
Nokia Inc.  
Attn: Repair Department  
795 West Nasa Blvd.  
Melbourne, FL 32901  
c) The Consumer shall include a return address, daytime phone number  
and/or fax number, complete description of the problem, proof of purchase  
and service agreement (if applicable). Expenses related to removing the  
Product from an installation are not covered under this limited warranty.  
d) The Consumer will be billed for any parts or labor charges not covered  
by this limited warranty. The Consumer will be responsible for any expenses  
related to reinstallation of the Product.  
e) Nokia will repair or authorize the repair of the Product under the limited  
warranty within 30 days after receipt of the Product by Nokia or an Nokia  
authorized service center. If Nokia cannot perform repair covered under  
this limited warranty within 30 days, or after a reasonable number of  
attempts to repair the same defect, Nokia at its option, will provide a  
replacement Product or refund the purchase price of the Product less a  
reasonable amount for usage.  
f) If the Product is returned to Nokia during the limited warranty period,  
but the problem with the Product is not covered under the terms and  
conditions of this limited warranty, the Consumer will be notified and  
given an estimate of the charges the Consumer must pay to have the  
Product repaired, with all shipping charges billed to the Consumer. If the  
estimate is refused, the Product will be returned freight collect. If the  
Product is returned to Nokia after the expiration of the limited warranty  
period, Nokia's normal service policies shall apply and the Consumer will  
be responsible for all shipping charges.  
9. The Product consists of newly assembled equipment that may contain  
used components that have been reprocessed to allow machine compliance  
with Product performance and reliability specifications.  
[ 124 ]  
Nokia One-Year Limited Warranty  
10. ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A  
PARTICULAR PURPOSE OR USE, SHALL BE LIMITED TO THE DURATION OF  
THE FOREGOING LIMITEDWRITTENWARRANTY. OTHERWISE, THE FOREGOING  
LIMITED WARRANTY IS THE CONSUMER'S SOLE AND EXCLUSIVE REMEDY  
AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. NOKIA  
SHALL NOT BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL  
DAMAGES, INCLUDING BUT NOT LIMITED TO, LOSS OF ANTICIPATED  
BENEFITS OR PROFITS, LOSS OF SAVINGS OR REVENUE, PUNITIVE DAMAGES,  
LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT, COST  
OF CAPITAL, COST OF ANY SUBSTITUTE EQUIPMENT OR FACILITIES,  
DOWNTIME, THE CLAIMS OF ANY THIRD PARTIES, INCLUDING CUSTOMERS,  
AND INJURY TO PROPERTY, RESULTING FROM THE PURCHASE OR USE OF  
THE PRODUCT OR ARISING FROM BREACH OF THE WARRANTY, BREACH  
OF CONTRACT, NEGLIGENCE, STRICT TORT, OR ANY OTHER LEGAL OR  
EQUITABLE THEORY, EVEN IF NOKIA KNEW OF THE LIKELIHOOD OF SUCH  
DAMAGES. NOKIA SHALL NOT BE LIABLE FOR DELAY IN RENDERING  
SERVICE UNDER THE LIMITED WARRANTY, OR LOSS OF USE DURING THE  
PERIOD THAT THE PRODUCT IS BEING REPAIRED.  
11. Some states do not allow limitation of how long an implied warranty  
lasts, so the above one-year warranty limitation may not apply to you (the  
Consumer). Some states do not allow the exclusion or limitation of  
incidental and consequential damages, so certain of the above limitations  
or exclusions may not apply to you (the Consumer). This limited warranty  
gives the Consumer specific legal rights and the Consumer may also have  
other rights which vary from state to state.  
12. Nokia neither assumes nor authorizes any authorized service center or  
any other person or entity to assume for it any other obligation or liability  
beyond that which is expressly provided for in this limited warranty including  
the provider or seller of any extended warranty or service agreement.  
13. This is the entire warranty between Nokia and the Consumer, and  
supersedes all prior and contemporaneous agreements or understandings,  
oral or written, and all communications relating to the Product, and no  
representation, promise or condition not contained herein shall modify  
these terms.  
[ 125 ]  
14. This limited warranty allocates the risk of failure of the Product  
between the Consumer and Nokia. The allocation is recognized by the  
Consumer and is reflected in the purchase price of the Product.  
15. Any action or lawsuit for breach of warranty must be commenced  
within eighteen (18) months following delivery of the Product.  
16. Questions concerning this limited warranty may be directed to:  
Nokia Customer Care Center  
7725 Woodland Center Blvd., Ste. 150  
Tampa, FL 33614  
Telephone: 1-888-NOKIA2U (1-888-665-4228)  
Facsimile: 1-813-249-9619  
For the hearing-impaired only (TTY):  
1-800-24NOKIA (1-800-246-6542)  
17. The limited warranty period for Nokia supplied attachments and  
accessories is specifically defined within their own warranty cards  
and packaging.  
[ 126 ]  
 
C
28.Index  
calculator 76  
currency conversion 76  
using 76  
Numerics  
call forwarding 37, 91  
call log 29  
1-touch dialing 44  
setup 44  
3-way conference calls 38  
call timers 31  
clear lists 30  
options 30  
viewing 29  
call mode 93  
call restrictions 59  
adding 60  
A
ABC mode 24  
access codes 58  
lock code 59  
security 58  
editing 61  
erasing 61  
selecting 61  
accessories 95  
batteries 96  
chargers 98  
call timers  
accessories and batteries 113  
adjusting earpiece volume 22  
advanced calling features 34  
anykey answer 36  
clear 31  
display 31  
call waiting 37, 92  
caller groups 48  
caller ID 36  
calling your voice mailbox 21  
calls  
B
Batteries  
Charging times 96  
Standby and talk times 97  
batteries 96  
1-touch dialing 44  
3-way calls 38  
adjusting earpiece volume 22  
advanced features 34  
answering 20  
anykey answer 36  
automatic redial 39  
call forwarding 37, 91  
call waiting 37, 92  
caller groups 48  
caller ID 36  
attaching 5  
charge level indicator 8  
charging 5  
removing 6  
using with chargers 112  
vibrating alert 52  
bookmarks  
about 86  
options 88  
returning 87  
saving 87  
ending 21  
in-call menu 34  
making 20  
[ 127 ]  
 
mute 36  
phone lock 57  
E
emergency calls 117  
ending a call 21  
entering text  
keypad 23  
redial last number 21  
rejecting 21  
send own caller ID 38, 93  
voice mailbox 21  
changing a number type 46  
charging  
Navi roller 23  
F
chargers 98  
clock 53  
feature codes 91  
displaying/hiding 54  
setting the time 53  
time format 54  
G
games 89  
starting 89  
getting started 5  
contact information  
Nokia 3  
service provider 4  
contact manager 77  
customize profile settings 51  
I
In-call menu 34  
in-call menu  
D
end all calls 35  
menu 35  
mute 36  
diagrams 7  
display 8  
header 9  
icons 9  
indicators 9  
scroll bar 9  
new call 35  
phone book 35  
send flash 35  
send touch tones 34  
indicators and icons 9  
Infrared 78  
Start screen 8  
display contrast 53  
display options 52  
contrast 53  
current call timer 53  
language 52  
show/hide clock 54  
DLR-3P 81  
calendar notes 80  
phone book 79  
sending/receiving data 78  
status 79  
types of connections 79  
modem connection 81  
PC Connectivity Guide 81  
synchronization 81  
download a ringing tone 88  
K
keyguard 56  
keypad lock 56  
keys 11  
end 11  
[ 128 ]  
Navi roller 11, 12  
number 11  
selection 11  
talk 11  
P
phone book 25  
adding a new number 45  
editing 27  
editing a number 45  
erasing a number 45  
erasing an entry 28  
making a call 26  
menus 26  
multiple numbers 45  
number types 46  
organizing 27  
L
labels 2  
last number redial 21  
Launching the browser 83  
letters and numbers 23  
lock code 59  
changing 59  
primary number 46  
scroll view 47  
searching 47  
text information 47  
M
making a call 20  
memory status 49  
menus  
using 26  
browsing 15  
help texts 15  
list of functions 16  
shortcuts 16  
working with 26  
phone lock 56  
activating/deactivating 57  
allowed number 57  
lock code 59  
N
making a call 57  
power switch 8  
primary number 46  
profiles 33  
Navi roller 12  
customizing 50  
entering characters 23  
network feature setting  
storing feature code 91  
network features  
call waiting 92  
public system setting 94  
send own caller ID 93  
network services 3  
call forwarding 91  
call mode 93  
customizing 50  
renaming 52  
selecting 33  
settings 51  
public system setting 94  
Q
quick save 25  
R
O
Racket 89  
Opposite 89  
[ 129 ]  
renaming a profile 52  
restore factory settings 54  
ringing tones, download 88  
Rotation 89  
U
Understanding a WAP web site 83  
updates 3  
V
S
voice dialing 41  
safety guidelines 114  
safety information 1  
saving names and numbers 25  
saving text information 47  
saving via phone book menu 25  
scroll view 47  
dialing a number 43  
important notes 42  
voice tags 41  
working with tags 43  
voice mail 32  
voice mailbox  
searching the phone book 47  
security code 58  
listen to messages 32  
setup 32  
Voice messages  
changing 58  
Security settings 56  
security settings  
Greetings, passwords, and prompts 32  
Listening to your voice messages 32  
Setting up your voice mailbox 32  
voice messages 32  
access codes 58  
call restrictions 59  
keyguard 56  
W
phone lock 56  
WAP card 84  
selecting call restrictions 61  
send own caller ID 38, 93  
setting display language 52  
setting the time 53  
setting time format 54  
slide  
disable/enable 55  
sliding cover 13  
re-attaching 13  
Snake II 89  
WAP services 82  
bookmarks 86  
browser 83  
browser menu 84, 85  
card Options menu 86  
navigating a WAP card 84  
service provider 83  
WAP web sites 83  
warranty  
contact information 126  
warranty information 122  
welcome note 54  
Wireless Application Protocol 82  
working with bookmarks 87  
starting a game 89  
T
technical information 121  
Para obtener un manual del usuario en español favor de llamar o enviar un  
fax al teléfono 1-888-NOKIA2U, fax 813-249-9619.  
[ 130 ]  

Tripp Lite NB1005BK User Manual
Toshiba SD C2712 User Manual
Toastmaster TCM12CD User Manual
Sony Ericsson K610im User Manual
Seagate ST3400833SCE User Manual
Seagate Solid State Drive ST240HM001 User Manual
Seagate BARRACUDA ST31000640AS User Manual
Samsung SGH L760 User Manual
Samsung Blackjack Access User Manual
Oregon Scientific BARM839A User Manual