Nokia 6555 User Guide
9204348
EN Issue 2
This device complies with Directive 2002/95/EC on the restriction of the use of certain hazardous
substances in electrical and electronic equipment.
Export controls
This device may contain commodities, technology or software subject to export laws and regulations from
the US and other countries. Diversion contrary to law is prohibited.
The third-party applications provided with your device may have been created and may be owned by
persons or entities not affiliated with or related to Nokia. Nokia does not own the copyrights or
intellectual property rights to the third-party applications. As such, Nokia does not take any responsibility
for end-user support, functionality of the applications, or the information in the applications or these
materials. Nokia does not provide any warranty for the third-party applications.
BY USING THE APPLICATIONS YOU ACKNOWLEDGE THAT THE APPLICATIONS ARE PROVIDED AS IS
WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW. YOU FURTHER ACKNOWLEDGE THAT NEITHER NOKIA NOR ITS AFFILIATES MAKE ANY
REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO
WARRANTIES OF TITLE, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR THAT THE
APPLICATIONS WILL NOT INFRINGE ANY THIRD-PARTY PATENTS, COPYRIGHTS, TRADEMARKS, OR OTHER
RIGHTS.
FCC/INDUSTRY CANADA NOTICE
Your device may cause TV or radio interference (for example, when using a telephone in close proximity to
receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such
interference cannot be eliminated. If you require assistance, contact your local service facility. This device
complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or modifications not expressly
approved by Nokia could void the user's authority to operate this equipment.
9204348/EN Issue 2
Contents
Nokia Xpress audio messaging................... 31
General information ........................ 8
About your device............................................. 8
Network services............................................... 8
Enhancements ................................................... 9
Access codes ...................................................... 9
Software updates........................................... 10
Download content......................................... 11
1. Get started.................................. 12
Install SIM card and battery....................... 12
Insert a microSD card................................... 14
Connect a headset......................................... 17
Save details...................................................... 41
Edit contact details........................................ 42
Business cards................................................. 42
Settings............................................................. 43
Groups............................................................... 43
Speed dialling.................................................. 43
Info, service, and my numbers.................... 43
2. Your phone................................. 19
Keys and parts ................................................ 19
Standby mode................................................. 20
Flight mode ..................................................... 22
Keypad lock (keyguard)................................ 23
Functions without a SIM card ................... 23
8. Log.............................................. 44
3. Call functions............................. 23
Make a voice call........................................... 23
Answer or decline a call .............................. 24
Options during a voice call......................... 25
9. Settings ...................................... 44
Profiles .............................................................. 44
Themes .............................................................. 45
Tones.................................................................. 45
Main Display.................................................... 45
Mini display ..................................................... 46
Date and time ................................................. 46
My shortcuts.................................................... 46
Connectivity..................................................... 47
Call ..................................................................... 51
Phone................................................................. 52
Enhancements................................................. 53
4. Write text................................... 25
Predictive text input..................................... 26
Traditional text input ................................... 27
5. Navigate the menus .................. 27
6. Messaging .................................. 28
Text messages................................................. 28
4
Configuration.................................................. 53
Security............................................................. 54
Restore factory settings............................... 55
10. Gallery...................................... 55
11. Push to talk ............................. 56
PTT channels.................................................... 56
Make and receive a PTT call ....................... 58
Callback requests........................................... 59
PTT settings ..................................................... 60
Configuration settings ................................. 61
Web.................................................................... 61
Bookmarks........................................................ 73
Appearance settings...................................... 74
Security settings............................................. 74
Download settings......................................... 75
Service inbox................................................... 75
Cache memory ................................................ 76
Browser security............................................. 76
12. Media ....................................... 61
Camera.............................................................. 62
Video.................................................................. 63
Music player.................................................... 63
Voice recorder................................................. 65
Equaliser........................................................... 65
Stereo widening............................................. 66
17. PC connectivity ....................... 77
Nokia PC Suite ................................................ 78
Packet data, HSCSD, and CSD .................... 78
Bluetooth.......................................................... 78
Data communication applications............ 78
13. Organiser.................................. 66
Alarm clock...................................................... 66
Calendar........................................................... 66
To-do list.......................................................... 67
Notes................................................................. 67
Calculator......................................................... 68
Countdown timer........................................... 68
Stopwatch........................................................ 68
18. Battery information................ 79
Charging and discharging............................ 79
Nokia battery authentication..................... 80
Index............................................... 86
5
F o r y o u r s a f e t y
For your safety
Read these simple guidelines. Not following them may be dangerous or illegal.
Read the complete user guide for further information.
SWITCH ON SAFELY
Do not switch the phone on when wireless phone use is prohibited or
when it may cause interference or danger.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands free to operate the
vehicle while driving. Your first consideration while driving should be
road safety.
INTERFERENCE
All wireless phones may be susceptible to interference, which could
affect performance.
SWITCH OFF IN HOSPITALS
Follow any restrictions. Switch the phone off near medical
equipment.
SWITCH OFF IN AIRCRAFT
Follow any restrictions. Wireless devices can cause interference in
aircraft.
SWITCH OFF WHEN REFUELLING
Do not use the device at a refuelling point. Do not use near fuel or
chemicals.
SWITCH OFF NEAR BLASTING
Follow any restrictions. Do not use the device where blasting is in
progress.
USE SENSIBLY
Use only in the positions as explained in the product documentation.
Do not touch the antenna areas unnecessarily.
QUALIFIED SERVICE
Only qualified personnel may install or repair this product.
ENHANCEMENTS AND BATTERIES
Use only approved enhancements and batteries. Do not connect
incompatible products.
6
F o r y o u r s a f e t y
WATER-RESISTANCE
Your device is not water-resistant. Keep it dry.
BACK-UP COPIES
Remember to make back-up copies or keep a written record of all
important information stored in your device.
CONNECTING TO OTHER DEVICES
When connecting to any other device, read its user guide for detailed
safety instructions. Do not connect incompatible products.
EMERGENCY CALLS
Ensure the phone function of the device is switched on and in
service. Press the end key as many times as needed to clear the
display and return to the standby mode. Enter the emergency
number, then press the call key. Give your location. Do not end the
call until given permission to do so.
7
G e n e r a l i n f o r m a t i o n
General information
■ About your device
The wireless device described in this guide is approved for use on the WCDMA
850 and 2100, EGSM 850 and 900, and GSM 1800 and 1900 networks. Contact
your service provider for more information about networks.
When using the features in this device, obey all laws and respect local customs,
privacy and legitimate rights of others, including copyrights.
Copyright protections may prevent some images, music (including ringing tones),
and other content from being copied, modified, transferred, or forwarded.
Warning: To use any features in this device, other than the alarm clock,
the device must be switched on. Do not switch the device on when
wireless device use may cause interference or danger.
■ Network services
To use the phone you must have service from a wireless service provider. Many of
the features require special network features. These features are not available on
all networks; other networks may require that you make specific arrangements
with your service provider before you can use the network services. Your service
provider can give you instructions and explain what charges will apply. Some
networks may have limitations that affect how you can use network services. For
instance, some networks may not support all language-dependent characters
and services.
Your service provider may have requested that certain features be disabled or not
activated in your device. If so, these features will not appear on your device
menu. Your device may also have a special configuration such as changes in
menu names, menu order, and icons. Contact your service provider for more
information.
This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP
protocols. Some features of this device, such as multimedia messaging (MMS),
browsing, e-mail application, instant messaging, presence enhanced contacts,
remote synchronization, and content downloading using the browser or MMS,
require network support for these technologies.
8
G e n e r a l i n f o r m a t i o n
■ Enhancements
A few practical rules about accessories and enhancements
•
Keep all accessories and enhancements out of the reach of small children.
•
When you disconnect the power cord of any accessory or enhancement, grasp
and pull the plug, not the cord.
•
•
Check regularly that enhancements installed in a vehicle are mounted and
are operating properly.
Installation of any complex car enhancements must be made by qualified
personnel only.
For availability of approved enhancements, please check with your dealer. When
the cord.
■ Access codes
Security code
The security code (5 to 10 digits) helps to protect your phone against
unauthorised use. For more information on security codes, see Security p. 54.
PIN codes
The personal identification number (PIN) code and the universal personal
identification number (UPIN) code (4 to 8 digits) help to protect your SIM card
against unauthorised use. See Security p. 54.
The PIN2 code (4 to 8 digits) may be supplied with the SIM card and is required
for some functions.
The module PIN is required to access the information in the security module. See
Security module p. 76.
The signing PIN is required for the digital signature. See Digital signature p. 77.
PUK codes
The personal unblocking key (PUK) code and the universal personal unblocking
key (UPUK) code (8 digits) is required to change a blocked PIN code and UPIN
code, respectively. The PUK2 code (8 digits) is required to change a blocked PIN2
9
G e n e r a l i n f o r m a t i o n
code. If the codes are not supplied with the SIM card, contact your local service
provider for the codes.
Barring password
The barring password (4 digits) is required when using the Call barring. See
Security p. 54.
■ Configuration settings service
To use some of the network services, such as mobile internet services, MMS,
Nokia Xpress audio messaging, or remote internet server synchronization, your
phone needs the correct configuration settings. For more information on
availability, contact your network operator, service provider, nearest authorised
support.
When you have received the settings as a configuration message, and the
settings are not automatically saved and activated, Configuration sett. received is
displayed.
To save the settings, select Show > Save. If required, enter the PIN code supplied
by the service provider.
To discard the received settings, select Exit or Show > Discard.
■ Software updates
Important: Use only services that you trust and that offer adequate
security and protection against harmful software.
Nokia may produce software updates that may offer new features, enhanced
functions, or improved performance. You may be able to request these updates
through the Nokia Software Updater PC application. To update the device
software, you need the Nokia Software Updater application and a compatible PC
with Microsoft Windows 2000 or XP operating system, broadband internet
access, and a compatible data cable to connect your device to the PC.
To get more information and to download the Nokia Software Updater
Downloading software updates may involve the transmission of large amounts of
data through your service provider's network. Contact your service provider for
information about data transmission charges.
10
G e n e r a l i n f o r m a t i o n
Make sure that the device battery has enough power, or connect the charger
before starting the update.
Your service provider may send phone software updates over the air directly to
your device. This option may not be available, depending on your phone.
Warning: If you install a software update, you cannot use the device,
even to make emergency calls, until the installation is completed and
the device is restarted. Be sure to back up data before accepting
installation of an update.
■ Download content
You may be able to download new content (for example, themes) to the phone
(network service).
For the availability of different services and pricing, contact your service provider.
Important: Use only services that you trust and that offer adequate
security and protection against harmful software.
■ Nokia support
of this guide, additional information, downloads, and services related to your
Nokia product.
On the website, you can get information on the use of Nokia products and
services. If you need to contact customer service, check the list of local Nokia
For maintenance services, check your nearest Nokia service centre at
■ Digital rights management
Content owners may use different types of digital rights management (DRM)
technologies to protect their intellectual property, including copyrights. This
device uses various types of DRM software to access DRM-protected content.
With this device you may be able to access content protected with WMDRM 10.
If certain DRM software fails to protect the content, content owners may ask
that such DRM software’s ability to access the new DRM-protected content be
revoked. Revocation may also prevent renewal of such DRM-protected content
already in your device. Revocation of such DRM software does not affect the use
11
G e t s t a r t e d
of content protected with other types of DRM or the use of non-DRM-protected
content.
Digital rights management (DRM) protected content comes with an associated
activation key that defines your rights to use the content. If your device has
WMDRM protected content, both the activation keys and the content will be lost
if the device memory is formatted. You may also lose the activation keys and the
content in case the files on your device get corrupted. Losing the activation keys
or the content may limit your ability to use the same content on your device
again. For more information, contact your service provider.
1. Get started
■ Install SIM card and battery
Always switch the device off and disconnect the charger before removing the
battery.
Keep all SIM cards out of the reach of small children.
For availability and information on using SIM card services, contact your SIM
card vendor. This may be the service provider or other vendor.
This device is intended for use with BL-5C battery. Always use original Nokia
batteries. See Nokia battery authentication p. 80.
Warning: Use only batteries, chargers, and enhancements approved by
Nokia for use with this particular model. The use of any other types may
invalidate any approval or warranty, and may be dangerous.
The SIM card and its contacts can easily be damaged by scratches or bending, so
be careful when handling, inserting, or removing the card.
To remove the back cover of the
phone, press lightly (1) and slide
the cover (2).
12
G e t s t a r t e d
Remove the battery as shown.
To open the SIM card holder, press
slightly (1) and lift the holder (2).
Insert the SIM card properly into
the holder.
Close the SIM card holder.
13
G e t s t a r t e d
Replace the battery.
Replace the back cover (1).
Slide the back cover into place (2).
■ Insert a microSD card
Keep all microSD memory cards out of the reach of small children.
A microSD card can be loaded with ringing tones, themes, music,
images and videos. If you delete, reload, or replace this card,
these functions and features may not function properly.
Use only microSD cards approved by Nokia for use with this device. Nokia uses
approved industry standards for memory cards, but some brands may not be fully
compatible with this device. Incompatible cards may damage the card and the
device and corrupt data stored on the card.
14
G e t s t a r t e d
1. Remove the back
cover and the
battery of the
phone. Slide the
microSD memory
card holder down
(1) and flip the
card holder up (2).
2. Insert the card
into the memory
card holder with
the gold-coloured
contact area
facing down (3).
3. Close the card
holder (4 and 5),
reinsert the
battery and slide the back cover in place.
Memory card
Keep all memory cards out of the reach of small children.
Some of the folders in Gallery with content that the phone use, for example,
Themes, may be stored on a memory card.
To insert and remove the microSD memory card see Insert a microSD card p. 14.
Format the memory card
When a memory card is formatted, all data on the card is permanently lost. Some
memory cards are supplied preformatted and others require formatting. Consult
your retailer to find out if you must format the memory card before use.
To format a memory card, select Menu > Gallery or Applications, the memory
card folder
, Options > Format mem. card > Yes. An unformatted memory
card may have NO NAME listed instead of Memory card. When formatting is
complete, enter a name for the memory card.
15
G e t s t a r t e d
Lock the memory card
To set a password to lock your memory card to help prevent unauthorised use,
select Menu > Gallery or Applications, the memory card folder
, Options >
Set password. The password can be up to eight characters long.
The password is stored in your phone and you do not have to enter it again while
you are using the memory card on the same phone. If you want to use the
memory card on another phone, you are asked for the password. To delete the
password, select Options > Delete password.
Check memory consumption
To check the memory consumption of different data groups and the available
memory for installing new applications or software on your memory card, select
Options > Details.
■ Charge the battery
Check the model number of any charger before use with this device. This device is
intended for use when supplied with power from an AC-3, AC-4, or AC-5 charger.
Warning: Use only batteries, chargers, and enhancements approved by
Nokia for use with this particular model. The use of any other types may
invalidate any approval or warranty, and may be dangerous.
1. Connect the charger to a wall
socket.
2. Connect the charger to your
phone.
A CA-44 charging adapter
can be used with older
charger models.
If the battery is completely
discharged, it may take several
minutes before the charging indicator appears on the display or before any calls
can be made.
The charging time depends on the charger used. Charging a BL-5C battery with
the AC-4 charger takes approximately 1 hour and 30 minutes while the phone is
in the standby mode.
16
G e t s t a r t e d
■ Open and close the phone
You open and close the phone manually. When you open the fold of the phone, it
Depending on the Theme a tone sounds when you open and close the phone.
■ Switch the phone on and off
Warning: Do not switch the phone on
when wireless phone use is prohibited or
when it may cause interference or
danger.
To switch the phone on or off, press and hold the
power key. See Keys and parts p. 19.
If the phone asks for a PIN or a UPIN code, enter
the code (displayed as ****), and select OK.
Set the time, time zone, and date
Enter the local time, select the time zone of your location in terms of the time
difference with respect to Greenwich Mean Time (GMT), and enter the date. See
Date and time p. 46.
Plug and play service
When you switch on your phone for the first time, and the phone is in the standby
mode, you are asked to get the configuration settings from your service provider
(network service). Confirm or decline the query. See Configuration settings
service p. 10.
■ Connect a headset
You can connect a Nokia 2.5 mm
headset to your device. Connect
the headset to the device as
shown.
17
G e t s t a r t e d
■ Antenna
Your device has an internal antenna located at the bottom of the device.
avoid touching an antenna unnecessarily when
the antenna is in use. For example, avoid
touching the cellular antenna during a phone
call. Contact with a transmitting or receiving
antenna affects the quality of the radio
communication, may cause the device to operate
at a higher power level than otherwise needed
and may reduce the battery life.
■ Connect your phone and PC
The CA-101 data cable
is used for data transfer
and synchonising your
phone and PC.
See "Data transfer," p.
50 for more
information. You must
download Nokia PC
Suite to use with your
device. Go to
1. Connect the lead from the CA-101 to the micro USB socket on the lower left
side of your phone.
2. Connect the CA-101 to your PC or laptop. USB data cable connected. Select
mode. appears on the display screen of your phone.
3. Select OK and Default mode.
18
Y o u r p h o n e
2. Your phone
■ Keys and parts
1) Earpiece
8) Volume key
2) Main display
3) NaviTM key
4) Right selection key
5) End key and power key
6) Key pad
9) USB connector
10) Charger connector
11) Call key
12) Left selection key
13) Universal headset connector
7) Camera key or PTT key if PTT is 14) Mini display
activated
19
Y o u r p h o n e
■ Standby mode
When the phone is ready for use, and you have not entered any characters, the
phone is in the standby mode.
Mini display
1 Network mode indicator
2 Signal strength of the cellular network
3 Battery charge status
4 Indicators
5 Network name or the operator logo
6 Clock and date or profile
Analogue clock
The Mini display settings include a screensaver to display an
analogue clock. To show the clock, select Menu > Settings >
Mini display > Screen saver > Analogue clock. The time-out
default to display the clock after closing the fold is ten
seconds. To display the clock sooner, select Menu > Settings
> Mini display > Screen saver > Time-out and set the time to
five seconds.
Main display
1 Network mode indicator
2 Signal strength of the cellular network
3 Battery charge status
4 Indicators
5 Network name or the operator logo
6 Clock
7 Main display
8 The left selection key is Go to or a shortcut to
another function. See Left selection key p. 46.
20
Y o u r p h o n e
9 The middle selection key mode is Menu.
10 The right selection key may be Names to access the list of contacts in the
Contacts menu, an operator-specific name to access an operator-specific
website, or a shortcut to a function you selected. See Right selection key p. 46.
Active standby
In the active standby mode there is a list of selected phone features and
information on the screen that you can directly access in the standby mode. To
switch on or off the mode, select Menu > Settings > Main display > Active
standby > Active standby mode > On or Off.
In the active standby mode, scroll up or down to navigate the list. Left and right
arrows at the beginning and end of a line indicate that further information is
available by scrolling left or right. To end the active standby navigation mode,
select Exit.
To organise and change the active standby mode, activate the navigation mode,
and select Options > Personalise view.
Indicators
You have unread messages.
You have new voice mail.
You have unsent, canceled or failed messages.
The phone registered a missed call.
,
Your phone is connected to the instant messaging service, and the
availability status is online or offline.
You received one or several instant messages.
The keypad is locked.
The phone does not ring for an incoming call or text message.
The alarm clock is activated.
The countdown timer is running.
The stopwatch is running.
21
Y o u r p h o n e
The phone is registered to the GPRS or EGPRS network.
A GPRS or EGPRS connection is established.
The GPRS or EGPRS connection is suspended (on hold).
A Bluetooth connection is active.
,
Push-to-talk connection is active or suspended.
If you have two phone lines, the second phone line is selected.
All incoming calls are forwarded to another number.
The loudspeaker is activated, or the music stand is connected to the
phone.
Calls are limited to a closed user group.
The timed profile is selected.
,
,
, or
A headset, handsfree, loopset, or music stand enhancement is
connected to the phone.
■ Flight mode
You can deactivate all radio frequency functions and still have access to offline
games, calendar, and phone numbers. Use the flight mode in radio sensitive
environments—on board aircraft or in hospitals. When the flight mode is active,
is shown.
Select Menu > Settings > Profiles > Flight > Activate or Personalise.
To deactivate the flight mode, select any other profile.
Warning: With the flight profile you cannot make or receive any calls,
including emergency calls, or use other features that require network
coverage. To make calls, you must first activate the phone function by
changing profiles. If you need to make an emergency call while the
device is locked and in flight profile you may also be able to enter an
official emergency number programmed in your device in the lock code
field and select Call. The device will confirm that you are about to exit
flight profile to start an emergency call.
22
C a l l f u n c t i o n s
■ Keypad lock (keyguard)
Select Menu or Unlock (1), and press * (2)
within 1.5 seconds to lock or unlock the keypad.
If the security keyguard is activated, enter the
security code if requested.
To answer a call when the keyguard is on, press
the call key or open the phone. When you end or
reject the call, the keypad automatically locks.
For Security keyguard, see Phone p. 52.
When the keyguard is on, calls may be possible
to the official emergency number programmed
into your device.
■ Functions without a SIM card
Several functions of your phone may be used without installing a SIM card (for
example, the data transfer with a compatible PC or another compatible device).
Without a SIM card, some functions appear dimmed in the menus and cannot be
used.
For an emergency call, some networks may require that a valid SIM card is
properly inserted in the device.
3. Call functions
■ Make a voice call
1. Enter the phone number, including the area code.
For international calls, press * twice for the international prefix (the +
character replaces the international access code), enter the country code, the
area code without the leading 0, if necessary, and the phone number.
2. To call the number, press the call key.
To increase the volume in a call, press the volume up key and to decrease
press the volume down key.
23
C a l l f u n c t i o n s
3. To end the call or to cancel the call attempt, press the end key, or close the
phone.
To search for a name or phone number that you have saved in Contacts, see
Search for a contact p. 41. Press the call key to call the number.
To access the list of dialed numbers, press the call key once in the standby mode.
To call the number, select a number or name, and press the call key.
Speed dialling
Assign a phone number to one of the sped dialling keys, 2 to 9. See Speed dialling
p. 43. Call the number in either of the following ways:
•
•
Press a speed-dialling key, then the call key.
If speed dialling is set to On, press and hold a speed dialling key until the call
begins. See Speed dialling in Call p. 51.
Enhanced voice dialling
You can say the name saved in the contact list of the phone to make a phone call.
Voice commands are not language-dependent. To set the language, see Voice
recognition language in Phone p. 52.
Note: Using voice tags may be difficult in a noisy environment or
during an emergency, so you should not rely solely upon voice dialling
in all circumstances.
1. In the standby mode, press and hold the volume down key. A short tone is
played, and Speak now is displayed.
2. Say the voice command clearly. If the voice recognition was successful, a list
with matches is shown. The phone plays the voice command of the match on
the top of the list. If the result is not the correct one, scroll to another entry.
Using voice commands to carry out a selected phone function is similar to
voice dialling. See Voice commands in My shortcuts p. 47.
■ Answer or decline a call
To answer an incoming call, press the call key, or open the phone. To end the call,
press the end key or close the phone.
To decline an incoming call, press the end key or close the phone. To reject an
incoming call when the phone is closed, press and hold a volume key.
24
W r i t e t e x t
To mute the ringing tone, press a volume key when the phone is closed, or select
Silence when the phone is open.
Call waiting
To answer the waiting call during an active call, select Answer. The first call is put
on hold. To end the active call, press the end key. To switch back to the first call
without ending the second call, select Options > Swap.
To activate the Call waiting function, see Call p. 51.
■ Options during a voice call
Many of the options that you can use during a call are network services. For
availability, contact your service provider.
During a call, select Options and from the following:
Call options are Mute or Unmute, Contacts, Menu, Lock keypad, Record,
Loudspeaker or Handset.
Network services options are Answer or Decline, Hold or Unhold, New call, Add to
conference, End call, End all calls, and the following:
Touch tones — to send tone strings
Swap — to switch between the active call and the call on hold
Transfer calls — to connect a call on hold to an active call and disconnect yourself
Conference — to make a conference call of up to five persons
Private call —to discuss privately in a conference call
Warning: Do not hold the device near your ear when the loudspeaker is
in use, because the volume may be extremely loud.
4. Write text
You can enter text (for example, when writing messages) using traditional or
predictive text input. When you write text, text input indicators appear at the top
of the display.
indicates traditional text input.
indicates predictive text
input. Predictive text input allows you to write text quickly using the phone
keypad and a built-in dictionary. You can enter a letter with a single keypress.
25
W r i t e t e x t
indicates predictive text input with Word suggestions. The phone predicts
and completes the word before you enter all the characters.
, or appears next to the text input indicator, indicating the character
,
case. To change the character case, press #.
indicates number mode. To change from the letter to number mode, press
and hold #, and select Number mode.
To set the writing language while writing text, select Options > Writing
language.
■ Predictive text input
To set predictive text input on, select Options > Prediction options >
Prediction > On.
Tip: To quickly set predictive text input on or off when writing text, press
# twice, or select and hold Options.
To select the prediction input type, select Options > Prediction options >
Prediction type > Normal or Word suggestions.
1. Start writing a word using the 2 to 9 keys. Press each key only once for one
letter. The entered letters are displayed underlined.
If you selected Word suggestions as prediction type, the phone starts to
predict the word you are writing. After you enter a few letters, and if these
entered letters are not a word, the phone tries to predict longer words. Only
the entered letters are displayed underlined.
To insert a special character, press and hold *, or select Options > Insert
symbol. Scroll to a character, and select Insert.
To write compound words, enter the first part of the word; to confirm it, press
the scroll key right. Write the next part of the word and confirm the word.
To enter a full stop, press 1.
2. When you finish writing the word and it is correct, to confirm it, press 0 to
add space.
If the word is not correct, press * repeatedly. When the word that you want
appears, select the word.
If the ? character is displayed after the word, the word you intended to write
is not in the dictionary. To add the word to the dictionary, select Spell.
Complete the word (traditional text input is used), and select Save.
26
N a v i g a t e t h e m e n u s
■ Traditional text input
To set traditional text input on, select Options > Prediction
options >Prediction > Off.
Press a number key, 1 to 9, repeatedly until the desired character appears. Not all
characters available under a number key are printed on the key. The characters
available depend on the selected writing language.
If the next letter you want is located on the same key as the present one, wait
until the cursor appears.
The most common punctuation marks and special characters are available under
the 1 key. For more characters, press *.
5. Navigate the menus
The phone offers you an extensive range of functions, which are grouped into
menus.
1. To access the menu, select Menu.
To change the menu view, select Options > Main menu view > List or Grid.
To rearrange the menu, scroll to the menu you want to move, and select
Options > Organise > Move. Scroll to where you want to move the menu, and
select OK. To save the change, select Done > Yes.
2. Scroll through the menu, and select an option (for example, Settings).
3. If the selected menu contains further submenus, select the one you want (for
example, Call).
4. If the selected menu contains further submenus, repeat step 3.
5. Select the setting of your choice.
6. To return to the previous menu level, select Back. To exit the menu, select
Exit.
27
M e s s a g i n g
6. Messaging
You can read, write, send, and save text, multimedia, e-mail,
audio, and flash messages. All messages are organised into folders.
Note: Your device may indicate that your message was sent to the
message center number programmed into your device. Your device may
not indicate whether the message is received at the intended
destination. For more details about messaging services, contact your
service provider.
■ Text messages
With the short message service (SMS) you can send and receive text messages,
and receive messages that can contain pictures (network service).
Before you can send any text or SMS e-mail messages, you must save your
message centre number. See Message settings p. 38.
To check SMS e-mail service availability and to subscribe to the service, contact
your service provider. To save an e-mail address in Contacts, see Save details
p. 41.
Your device supports the sending of text messages beyond the character limit for
a single message. Longer messages are sent as a series of two or more messages.
Your service provider may charge accordingly. Characters that use accents or
other marks, and characters from some language options take up more space
limiting the number of characters that can be sent in a single message.
An indicator at the top of the display shows the total number of characters left
and the number of messages needed for sending. For example, 673/2 means that
there are 673 characters left and that the message is sent as a series of two
messages.
Write and send a message
1. Select Menu > Messaging > Create message > Message.
2. Enter one or more phone numbers or e-mail addresses in the To: field. To
retrieve a phone number or e-mail address from a memory, select Add.
3. Write your message in the Text: field.
4. To send the message, select Send. See Message sending p. 29.
28
M e s s a g i n g
Read and reply to a message
1. To view a received message, select Show. To view it later, select Exit.
To read the message later, select Menu > Messaging > Inbox.
2. To reply to a message, select Reply. Write the reply message.
3. To send the message, select Send. See Message sending p. 29.
■ Multimedia messages
Only devices that have compatible features can receive and display multimedia
messages. The appearance of a message may vary depending on the receiving
device.
A multimedia message can contain some attachments.
To check availability and to subscribe to the multimedia messaging network
service, contact your service provider.
Write and send a multimedia message
The wireless network may limit the size of MMS messages. If the inserted picture
exceeds this limit, the device may make it smaller so that it can be sent by MMS.
1. Select Menu > Messaging > Create message > Message > Options > Change
to multim..
2. Write your message. To add a file, scroll to the icons at the bottom of the
display and find the type of file you want and select Insert.
3. To view the message before sending it, select Options > Preview.
4. To send the message, select Send. See Message sending p. 29.
5. Enter one or more phone numbers or e-mail addresses in the To: field. To
retrieve a phone number or e-mail address from a memory, select Add.
6. To send the message, select Send. See Message sending p. 29.
Message sending
Copyright protections may prevent some images, music (including ringing tones),
and other content from being copied, modified, transferred or forwarded.
To send the message, select Send. The phone saves the message in the Outbox
folder, and the sending starts.
29
M e s s a g i n g
If an interruption occurs while the message is being sent, the phone tries to
resend the message a few times. If these attempts fail, the message remains in
the Outbox folder. To cancel the sending of the messages in the Outbox folder,
scroll to the desired message, and select Options > Cancel sending.
Read and reply to a message
Important: Exercise caution when opening messages. Multimedia
message objects may contain malicious software or otherwise be
harmful to your device or PC.
1. To view a received message, select Show. To view it later, select Exit.
2. To view the whole message if the received message contains a presentation,
select Play.
To view the files in the presentation or the attachments, select Options >
Objects or Attachments.
3. To reply to the message, select Options > Reply > Message, E-mail message,
Flash message, or Audio message. Write the reply message.
4. To send the message, select Send.
■ Flash messages
Flash messages are text messages instantly displayed upon reception. Flash
messages are not automatically saved.
Write a message
Select Menu > Messaging > Create message > Flash message. Enter the
recipient’s phone number and write your message. To insert a blinking text into
the message, select Options > Insert symbol> Blink character to set a marker. The
text behind the marker blinks until a second marker is inserted.
Receive a message
A received flash message is indicated with Message: , the number of messages,
and a few words from the beginning of the message. To read the message, select
Read. To extract numbers and addresses from the current message, select
Options > Use detail. To save the message, select Save and the folder in which
you want to save it.
30
M e s s a g i n g
■ Nokia Xpress audio messaging
You can use the MMS to create and send an audio message in a convenient way.
MMS must be activated before you can use audio messages.
Create a message
1. Select Menu > Messaging > Create message > Audio message. The recorder
opens. To use the recorder, see Voice recorder p. 65.
2. Speak your message.
3. Enter one or more phone numbers in the To: field, or select Add to retrieve a
number.
4. To send the message, select Send.
Listen to a message
To open a received audio message, select Play. If more than one message is
received, select Show > Play. To listen to the message later, select Exit.
■ Memory full
When you receive a message, and the memory for the messages is full, Memory
full. Unable to receive msgs. is shown. To first delete old messages, select OK >
Yes and the folder. Scroll to the desired message, and select Delete. If more
messages are to be deleted, select Mark. Mark all the messages you want to
delete, and select Options > Delete marked.
■ Folders
The phone saves received messages in the Inbox folder.
Messages that have not yet been sent are saved in the Outbox folder.
To set the phone to save the sent messages in the Sent items folder, see Save sent
messages in General settings p. 38.
To edit and send messages that you have written and saved in the Drafts folder,
select Menu > Messaging > Drafts.
You can move your messages to the Saved items folder. To organise your Saved
items subfolders, select Menu > Messaging > Saved items. To add a folder, select
Options > Add folder. To delete or rename a folder, scroll to the desired folder,
and select Options > Delete folder or Rename folder.
31
M e s s a g i n g
Your phone has templates. To create a new template, save a message as a
template. To access the template list, select Menu > Messaging > Saved items >
Templates.
■ E-mail application
The e-mail application uses a packet data connection (network service) to allow
you to access your e-mail account. This e-mail application is different from the
SMS e-mail function. To use the e-mail function on your phone, you need a
compatible e-mail system.
You can write, send, and read e-mail with your phone. Your phone supports POP3
and IMAP4 e-mail servers. This application does not support keypad tones.
Before you can send and retrieve any e-mail messages, you must obtain a new
e-mail account or use your current account. To check the availability of your
e-mail account, contact your e-mail service provider.
Check your e-mail settings with your e-mail service provider. You may receive the
e-mail configuration settings as a configuration message. See Configuration
settings service p. 10.
To activate the e-mail settings, select Menu > Messaging > Message settings >
E-mail messages. See E-mail messages p. 40.
Setting wizard
The setting wizard will start automatically if no e-mail settings are defined in the
phone. To enter the settings manually, select Menu > Messaging > E-mail
mailbox > Options > Yes > Create manually.
The Manage accounts options allow you to add, delete, and change the e-mail
settings. Make sure that you have defined the correct preferred access point for
your operator. See Configuration p. 53.
The e-mail application requires an internet access point without a proxy. WAP
access points normally include a proxy and do not work with the e-mail
application.
Write and send an e-mail
You can write your e-mail message before connecting to the e-mail service; or
connect to the service first, then write and send your e-mail.
1. Select Menu > Messaging > E-mail message.
32
M e s s a g i n g
2. If more than one e-mail account is defined, select the account from which
you want to send the e-mail.
3. Enter the recipient’s e-mail address, write the subject, and enter the e-mail
message. To attach a file from Gallery, select Options > Insert.
4. To send the e-mail message, select Send > Send now.
To save the e-mail in the Outbox folder to be sent later, select Send > Send
later.
To edit or continue writing your e-mail later, select Options > Save as draft.
The e-mail is saved in Outboxes > Drafts.
To send the e-mail later, select Menu > Messaging > E-mail > Options >
Send now or Send/check e-mail.
Download e-mail
1. To download e-mail messages that have been sent to your e-mail account,
select Menu > Messaging > E-mail > Check new e-mail.
If more than one e-mail account is defined, select the account from which
you want to download the e-mail.
The e-mail application only downloads e-mail headers at first.
2. Select Back > Inboxes, the account name, and the new message, and select
Retrieve to download the complete e-mail message.
To download new e-mail messages and to send e-mail that has been saved in the
Outbox folder, select Options > Send/check e-mail.
Read and reply to e-mail
Important: Exercise caution when opening messages. E-mail messages
may contain malicious software or otherwise be harmful to your device
or PC.
1. Select Menu > Messaging > E-mail > Inboxes, the account name, and the
desired message.
2. To reply to an e-mail, select Reply > Original text or Empty message. To reply
to many, select Options > Reply to all. Confirm or edit the e-mail address and
subject, then write your reply.
3. To send the message, select Send > Send now.
33
M e s s a g i n g
E-mail folders
Your phone saves e-mail that you have downloaded from your e-mail account in
the Inboxes folder. The Outboxes folder contains the following folders: “Account
name” for incoming e-mail, Archive for archiving e-mail, Custom 1—Custom 3 for
sorting e-mail, Junk where all spam e-mail is stored, Drafts for saving unfinished
e-mail, Outbox for saving e-mail that has not been sent, and Sent items for
saving e-mail that has been sent.
To manage the folders and their e-mail content, select Options to view the
available options of each folder.
Spam filter
To activate and define a spam filter, select Options > Spam filter > Settings in
the main e-mail idle screen. The spam filter allows you to put specific senders on
a black or white list. Black list sender messages are filtered to the Junk folder.
Unknown and white list sender messages are downloaded into the account inbox.
To blacklist a sender, select the e-mail message in the Inboxes folder and
Options > Blacklist sender.
■ Instant messaging
With instant messaging (IM) (network service) you can send short, simple text
messages to online users. You have to subscribe to a service and register with the
IM service you want to use. For more information about signing up for IM
services, contact your service provider.
Access
Select Menu > Messaging > IMs. IMs may be replaced by another term
depending on the service provider. If more than one set of connection settings for
IM service is available, select the one you want. Select from the following
options:
Login — to connect to the IM service. To set the phone to automatically connect
to the IM service when you switch on the phone; in the login session, select
Automatic login: > On, or select Menu > Messaging > IMs, connect to the IM
service, and select Options > Settings > Automatic login > On.
Saved convers. — to view, erase, or rename the conversations you saved during an
IM session
34
M e s s a g i n g
Connect. settings — to edit the settings needed for messaging and presence
connection
Connect
To connect to the service, access the instant messages menu, select the IM
service, if needed, and select Login.
To disconnect from the IM service, select Options > Logout.
Sessions
When connected to the service your status as seen by others is shown in a status
line: Status: Online, My status: Busy or Status: App. off. To change own status,
select Change.
Below the status line there are three folders containing your contacts and
showing their status: Convers., Online and Offline. To expand the folder, scroll to
it and select Expand (or press scroll right), to collapse the folder select Collapse
(or press scroll left).
Conversations — shows the list of new and read instant messages or invitations
to IM during the active IM session.
indicates a new group message.
indicates a read group message.
indicates a new instant message.
indicates a read instant message.
indicates an invitation.
The icons and texts on the display depend on the IM service.
Online — shows the number of contacts that are online
Offline — shows the number of contacts that are offline
To start a conversation, expand the Online or the Offline folder and scroll to the
contact with whom you would like to chat and select Chat. To answer an
invitation or to reply to a message expand the Conversations folder and scroll to
the contact to whom you would like to chat and select Open. To add contacts, see
Add IM contacts p. 36.
Groups > Public groups (not visible if groups are not supported by the network) —
the list of bookmarks to public groups provided by the service provider is
displayed. To start a IM session with a group, scroll to a group, and select Join.
Enter the screen name that you want to use as your nickname in the
35
M e s s a g i n g
conversation. When you have successfully joined the group conversation, you can
start a group conversation. You can create a private group. See Groups p. 37.
Search > Users or Groups — to search for other IM users or public groups on the
network by phone number, screen name, e-mail address, or name. If you select
Groups, you can search for a group by a member in the group, or by group name,
topic, or ID.
Options > Chat or Join group — to start the conversation when you have found
the user or the group you want.
Accept or reject an invitation
If you receive a new invitation, to read it, select Read. If more than one invitation
is received, select an invitation and Open. To join the private group conversation,
select Accept, and enter the screen name you want to use as your nickname. To
reject or delete the invitation, select Options > Reject or Delete.
Read an instant message
If you receive a new message not associated with an active conversation, New
instant message is displayed. To read it, select Read. If more than one message is
received, select a message, and Open.
New messages received during an active conversation are held in Instant
messages > Conversations. If you receive a message from someone not in IM
contacts, the sender ID is displayed. To save a new contact that is not in the
phone memory, select Options > Save contact.
Participate in a conversation
To join or start an IM session, write your message; and select Send.
If you receive a new message during a conversation from a person not taking part
in the current conversation,
tone.
is displayed, and the phone sounds an alert
Write your message; and select Send. Your message is displayed, and the reply
message is displayed below your message.
Add IM contacts
When connected to the IM service, in the IM main menu select Options > Add
contact > By mobile number, Enter ID manually, Search from serv., or Copy from
server (depending on service provider).
Scroll to a contact. To start a conversation, select Chat.
36
M e s s a g i n g
Block or unblock messages
When you are in a conversation and want to block messages, select Options >
Block contact.
To block messages from a contact in your contacts list, scroll to the contact in
Conversations, Online or Offline and select Options > Block contact > OK.
To unblock a contact, in the IM main menu select Options > Blocked list. Scroll to
the contact you want to unblock, and select Unblock > OK.
Groups
You can use the public groups provided by the service provider, or create your
own private groups for an IM conversation.
Public
You can bookmark public groups your service provider may maintain. Connect to
the IM service, and select Groups > Public groups. Select a group, and Join. If you
are not in the group, enter your screen name as your nickname for the group. To
delete a group from your list, select Options > Delete group.
To search for a group, select Groups > Public groups > Search groups.
Private
Connect to the IM service, and from the main menu select Options > Create
group. Enter the name for the group and the screen name you want to use as your
nickname. Mark the private group members in the contacts list, and write an
invitation.
■ Voice messages
The voice mailbox is a network service and you may need to subscribe to it. For
more information contact your service provider.
To call your voice mailbox, select Menu > Messaging > Voice messages > Listen
to voice msgs. To enter, search for, or edit your voice mailbox number, select
Voice mailbox number.
If supported by the network,
indicates new voice messages. To call your
voice mailbox number, select Listen.
37
M e s s a g i n g
■ Info messages
You can receive messages on various topics from your service provider (network
service). For more information, contact your service provider. Select Menu >
Messaging > Info messages.
■ Service commands
Write and send service requests (also known as USSD commands), such as
activation commands for network services, to your service provider. Select
Menu > Messaging > Serv. commands.
■ Delete messages
To delete messages, select Menu > Messaging > Delete messages > By message
to delete single messages, By folder to delete all messages from a folder, or All
messages.
■ SIM messages
SIM messages are specific text messages saved to your SIM card. You can copy or
move those messages to the phone memory, but not vice versa. To read SIM
messages, select Menu > Messaging > Options > SIM messages.
■ Message settings
General settings
General settings are common for text and multimedia messages.
Select Menu > Messaging > Message settings > General settings and from the
following options:
Save sent messages > Yes — to set the phone to save the sent messages in the
Sent items folder
Overwriting in Sent > Allowed — to set the phone to overwrite the old sent
messages with the new ones when the message memory is full. This setting is
shown only if you set Save sent messages > Yes.
Font size — to select the font size used in messages
Graphical smileys > Yes — to set the phone to replace character-based smileys
with graphical ones
38
M e s s a g i n g
Text messages
The text message settings affect the sending, receiving, and viewing of text and
SMS e-mail messages.
Select Menu > Messaging > Message settings > Text messages and from the
following options:
Delivery reports > Yes — to ask the network to send delivery reports about your
messages (network service)
Message centres > Add centre — to set the phone number and name of the
message centre that is required for sending text messages. You receive this
number from your service provider.
Msg. centre in use — to select the message centre in use
Message validity — to select the length of time for which the network attempts
to deliver your message
Messages sent via — to select the format of the messages to be sent: Text, Page,
or Fax (network service)
Use packet data > Yes — to set GPRS as the preferred SMS bearer
Character support > Full — to select all characters in the messages to be sent as
viewed. If you select Reduced, characters with accents and other marks may be
converted to other characters.
Rep. via same centre > Yes — to allow the recipient of your message to send you a
reply using your message centre (network service)
Multimedia messages
The message settings affect the sending, receiving, and viewing of multimedia
messages. You may receive the configuration settings for multimedia messaging
as a configuration message. See Configuration settings service p. 10. You can
also enter the settings manually. See Configuration p. 53.
Select Menu > Messaging > Message settings > Multimedia msgs. and from the
following options:
Delivery reports > Yes — to ask the network to send delivery reports about your
messages (network service)
MMS creation mode - Allows you to select whether or not to create multimedia
messages with restrictions on content. When selecting Restricted receiving
phone is more likely to support sent messages. Select Free enables you to add
various types of multimedia to the message.
39
M e s s a g i n g
Img. size — to set the image size in multimedia messages
Default slide timing — to define the default time between slides in multimedia
messages
Allow MMS receptn. — to receive or block the multimedia message, select Yes or
No. If you select In home network, you cannot receive multimedia messages
when outside your home network. The default setting of the multimedia message
service is generally In home network. The availability of this menu depends on
your phone.
Incoming MMS msgs. — to allow the reception of multimedia messages
automatically, manually after being prompted, or to reject the reception. This
setting is not shown if Allow multimedia reception is set to No.
Allow adverts — to receive or reject advertisements. This setting is not shown if
Allow multimedia reception is set to No, or Incoming multi- media messages is
set to Reject.
Configuration sett. > Configuration — only the configurations that support
multimedia messaging are shown. Select a service provider, Default, or Personal
config. for multimedia messaging. Select Account and an MMS account
contained in the active configuration settings.
E-mail messages
The settings affect the sending, receiving, and viewing of e-mail. You may receive
the settings as a configuration message. See Configuration settings service p. 10.
You can also enter the settings manually. See Configuration p. 53.
Select Menu > Messaging > Message settings > E-mail messages and from the
following options:
New e-mail notif.— turn new e-mail notification on or off
Allow mail reception— to always allow messages, or only in your home network
Reply with orig. msg. — to reply with the original text in an e-mail
Image size in e-mail — to define the default size of an image in an e-mail
Edit mailboxes— to add, delete, or change the mailboxes in use
40
C o n t a c t s
7. Contacts
You can save names and phone numbers (contacts) in the phone
memory and in the SIM card memory.
The phone memory may save contacts with additional details, such as various
phone numbers and text items. You can also save an image for a limited number
of contacts.
The SIM card memory can save names with one phone number attached to them.
The contacts saved in the SIM card memory are indicated by
.
■ Search for a contact
Select Menu > Contacts > Names. Scroll through the list of contacts, or enter
the first characters of the name you are searching for.
■ Save names and phone numbers
Names and numbers are saved in the used memory. To save a name and phone
number, select Menu > Contacts > Names > Options > Add new contact.
■ Save details
In the phone memory you can save different types of phone numbers, a tone or a
video clip, and short text items for a contact.
The first number you save is automatically set as the default number, and it is
indicated with a frame around the number type indicator (for example,
).
When you select a name from contacts (for example, to make a call), the default
number is used unless you select another number.
Make sure that the memory in use is Phone or Phone and SIM. See Settings p. 43.
Search for the contact to which you want to add a detail, and select Details >
Options > Add detail. Select from the options available.
■ Copy or move contacts
You can move and copy contacts from the phone memory to the SIM card
memory, or vice versa. The SIM card can save names with one phone number
attached to them.
41
C o n t a c t s
To move or copy contacts one by one, select Menu > Contacts > Names. Scroll to
the contact, and select Options > Move contact or Copy contact.
To move or copy marked contacts, select Menu > Contacts > Names. Scroll to a
contact, and select Options > Mark. Then mark all other contacts, and select
Options > Move marked or Copy marked.
To move or copy all contacts, select Menu > Contacts > Move contacts or Copy
contacts.
■ Edit contact details
Search for the contact, and select Details. To edit a name, number, text item, or
to change the image, select Options > Edit. To change the number type, scroll to
the desired number, and select Options > Change type. To set the selected
number as the default number, select Set as default.
■ Synchronise all
Synchronise your calendar, contacts data, and notes with a remote internet
server (network service). For details see Synchronise from a server p. 51.
■ Delete contacts
To delete all the contacts and the details attached to them from the phone or SIM
card memory, select Menu > Contacts > Del. all contacts > From phone memory
or From SIM card.
To delete a contact, search for the desired contact, and select Options > Delete
contact.
To delete a number, text item, or an image attached to the contact, search for the
contact, and select Details. Scroll to the desired detail, and select Options >
Delete and your desired option.
■ Business cards
You can send and receive a person’s contact information from a compatible
device that supports the vCard standard as a business card.
To send a business card, search for the contact whose information you want to
send, and select Details > Options > Send business card.
When you have received a business card, select Show > Save to save the business
card in the phone memory. To discard the business card, select Exit > Yes.
42
C o n t a c t s
■ Settings
Select Menu > Contacts > Settings and from the following options:
Memory in use — to select the SIM card or phone memory for your contacts.
Select Phone and SIM to recall names and numbers from both memories. In that
case, when you save names and numbers, they are saved in the phone memory.
Name display — to select whether the contact’s first or last name is displayed
first
Font size — to set the font size for the list of contacts
Memory status — to view the free and used memory capacity
■ Groups
Select Menu > Contacts > Groups to arrange the names and phone numbers
saved in the memory into groups with different ringing tones and group images.
■ Speed dialling
To assign a number to a speed-dialling key, select Menu > Contacts > Speed dials
and scroll to the speed-dialling number you want.
Select Assign, or if a number has already been assigned to the key, select
Options > Change. Select Find and locate the contact you want to assign. If the
Speed dials function is off, the phone asks whether you want to activate it. See
also Speed dials in Call p. 51.
To make a call using the speed-dialling keys, see Speed dialling p. 24.
■ Info, service, and my numbers
Select Menu > Contacts and from one of these submenus:
Info numbers — to call the information numbers of your service provider if the
numbers are included on your SIM card (network service)
Service numbers — to call the service numbers of your service provider if the
numbers are included on your SIM card (network service)
My numbers — to view the phone numbers assigned to your SIM card, if the
numbers are included on your SIM card
43
L o g
8. Log
The phone registers missed, received, and dialed calls if the network
supports it, the phone is switched on, and within the network service area.
To view the information on your calls, select Menu > Log > Missed calls,
Received calls, or Dialed numbers. To view your recent missed and received calls
and the dialed numbers chronologically, select Call log. To view the contacts to
whom you most recently sent messages, select Msg. recipients.
To view the information on your recent communications, select Menu > Log >
Call duration, Data counter, or Packet data timer.
Note: Some timers may be reset during service or software upgrades.
To view how many text and multimedia messages you have sent and received,
select Menu > Log > Message log.
Note: The actual invoice for calls and services from your service
provider may vary, depending on network features, rounding off for
billing, taxes, and so forth.
9. Settings
■ Profiles
Your phone has various settings groups called profiles, for which you can
personalise the phone tones for different events and environments.
Select Menu > Settings > Profiles, the desired profile and from the following
options:
Activate — to activate the selected profile
Personalise — to personalise the profile. Select the setting you want to change,
and make the changes.
Timed — to set the profile to be active until a certain time up to 24 hours, and set
the end time. When the time set for the profile expires, the previous profile that
was not timed becomes active.
44
S e t t i n g s
■ Themes
A theme contains elements for personalizing your phone.
Select Menu > Settings > Themes and from the following options:
Select theme — to set a theme. A list of folders in Gallery opens. Open the Themes
folder, and select a theme.
Theme downloads — to open a list of links to download more themes
■ Tones
You can change the tone settings of the selected active profile.
Select Menu > Settings > Tones. You can find the same settings in the Profiles
menu. See Personalise in Profiles p. 44.
To set the phone to ring only for calls from phone numbers that belong to a
selected caller group, select Alert for. Scroll to the caller group you want or All
calls, and select Mark.
Select Options > Save to save the settings or Cancel to leave the settings
unchanged.
If you select the highest ringing tone level, the ringing tone reaches its highest
level after a few seconds.
■ Main Display
Select Menu > Settings > Main display and from the available options:
Wallpaper — to add the background image in the standby mode
Active standby — to switch the active standby mode on or off and to organise and
personalise the active standby mode.
Standby mode font colour — to select the colour for the texts in the standby
mode
Navigation key icons — to display the icons of the current navigation key
shortcuts in the standby mode when active standby is off
Notification details — to display or hide details, such as contact information in a
missed call or message received notifications
Fold animation — to set your phone to display an animation when you open and
close the phone
Font size — to set the font size for messaging, contacts and web pages
45
S e t t i n g s
Operator logo — to set your phone to display or hide the operator logo
Cell info display > On — to display the cell identity, if available from the network
■ Mini display
Select Menu > Settings > Mini display. You can change the settings for
Wallpaper, Screen saver, Power saver, Sleep mode, and Fold animation.
■ Date and time
To change the time, time zone, and date settings, select Menu > Settings > Date
and time > Date & time settings, Date and time format, or Auto-update of date &
time (network service).
When traveling to a different time zone, select Menu > Settings > Date and
time > Date & time settings > Time zone and the time zone of your location in
terms of the time difference with respect to Greenwich Mean Time (GMT) or
Universal Time Coordinated (UTC). The time and date are set according to the
time zone and enable your phone to display the correct sending time of received
text or multimedia messages. For example, GMT -5 denotes the time zone for
New York (USA), 5 hours west of Greenwich/London (UK).
■ My shortcuts
With personal shortcuts you get quick access to often used phone functions.
Left selection key
To select a function from the list, select Menu > Settings > My shortcuts > Left
selection key.
If the left selection key is Go to to activate a function, in the standby mode,
select Go to > Options and from the following options:
Select options — to add a function to the shortcut list or to remove one
Organise — to rearrange the functions on your personal shortcut list
Right selection key
To select a function from the list, select Menu > Settings > My shortcuts > Right
selection key.
46
S e t t i n g s
Navigation key
To assign other phone functions from a predefined list to the navigation key
(scroll key), select Menu > Settings > My shortcuts > Navigation key.
Active standby key
To assign the navigation keys used to access the active standby, select Menu >
Settings > My shortcuts > Active standby key.
Voice commands
To call contacts and carry out phone functions, say the voice commands. Voice
commands are not language-dependent. To set the language, see Voice
recognition language in Phone p. 52.
To select the phone functions to activate with voice commands, select Menu >
Settings > My shortcuts > Voice commands and a folder. Scroll to a function.
indicates that the voice tag is activated. To activate the voice tag, select Add. To
play the activated voice command, select Playback. To use voice commands, see
Enhanced voice dialling p. 24.
To manage the voice commands, scroll to a phone function, and select from the
following options:
Edit or Remove — to change or deactivate the voice command of the selected
function
Add all or Remove all — to activate or deactivate voice commands to all functions
in the voice commands list
■ Connectivity
You can connect the phone to a compatible device using a Bluetooth wireless
technology or a USB data cable connection. You can also define the settings for
EGPRS or 3G dial-up connections.
Bluetooth wireless technology
This device is compliant with Bluetooth Specification 2.0 + EDR supporting the
following profiles: generic access, network access, generic object exchange,
hands-free, headset, object push, file transfer, dial-up networking, SIM card
access, personal area network profile, service discovery application profile,
generic audio/video distribution, service discovery application profile, advanced
47
S e t t i n g s
audio and distribution profile, audio/video remote control profile, generic audio/
video distribution profile, and serial port. To ensure interoperability between
other devices supporting Bluetooth technology, use Nokia approved
enhancements for this model. Check with the manufacturers of other devices to
determine their compatibility with this device.
There may be restrictions on using Bluetooth technology in some locations.
Check with your local authorities or service provider.
Features using Bluetooth technology or allowing such features to run in the
background while using other features, increase the demand on battery power
and reduce the battery life.
Bluetooth technology allows you to connect the phone to a compatible
Bluetooth device within 10 meters (32 feet). Since devices using Bluetooth
technology communicate using radio waves, your phone and the other devices do
not need to be in direct line-of-sight, although the connection can be subject to
interference from obstructions such as walls or from other electronic devices.
Key message:
•
Operating the device in hidden mode is a safer way to avoid malicious
software.
•
•
Do not accept Bluetooth connectivity from sources you do not trust.
Alternatively, switch off the Bluetooth function. This does not affect other
functions of the phone.
Set up a Bluetooth connection
Select Menu > Settings > Connectivity > Bluetooth and from the following
options:
Bluetooth > On or Off — to activate or deactivate the Bluetooth function.
indicates that Bluetooth is activated. When activating Bluetooth technology for
the first time, you are asked to give a name for the phone. Use a unique name
that is easy for others to identify.
Search for audio enhancements — to search for compatible Bluetooth audio
devices. Select the device that you want to connect to the phone.
Paired devices — to search for any Bluetooth device in range. Select New to list
any Bluetooth device in range. Select a device, and Pair. Enter an agreed
Bluetooth passcode of the device (up to 16 characters) to associate (pair) the
device to your phone. You must only give this passcode when you connect to the
48
S e t t i n g s
device for the first time. Your phone connects to the device, and you can start
data transfer.
Bluetooth wireless connection
Select Menu > Settings > Connectivity > Bluetooth. To check which Bluetooth
connection is currently active, select Active devices. To view a list of Bluetooth
devices that are currently paired with the phone, select Paired devices.
Bluetooth settings
To define how your phone is shown to other Bluetooth devices, select Menu >
Settings > Connectivity > Bluetooth > Bluetooth settings > My phone's visibility
or My phone's name.
If you are concerned about security, turn off the Bluetooth function, or set My
phone's visibility to Hidden. Always accept only Bluetooth communication from
others with whom you agree.
Packet data
General packet radio service (GPRS) or 3G are network services that allows
mobile phones to send and receive data over an internet protocol (IP)-based
network.
To define how to use the service, select Menu > Settings > Connectivity > Packet
data > Packet data connection and from the following options:
When needed — to set the packet data connection to established when an
application needs it. The connection is closed when the application is terminated.
Always online — to set the phone to automatically connect to a packet data
network when you switch the phone on
Modem settings
You can connect the phone using Bluetooth wireless technology or USB data
cable connection to a compatible PC and use the phone as a modem to enable
GPRS or 3G connectivity from the PC.
To define the settings for connections from your PC, select Menu > Settings >
Connectivity > Packet data > Packet data settings > Active access point, and
activate the access point you want to use. Select Edit active access point >
Packet data access point, enter a name to change the access point settings, and
49
S e t t i n g s
select OK. Select Packet data access point, enter the access point name (APN) to
establish a connection to an network, and select OK.
You can set the EGPRS dial-up service settings (access point name) on your PC
using the Nokia Modem Options software. See Nokia PC Suite p. 78. If you have
set the settings both on your PC and on your phone, the PC settings are used.
Data transfer
Synchronise your calendar, contacts data, and notes with another compatible
device (for example, a mobile phone), a compatible PC, or a remote internet
server (network service).
Your phone allows data transfer with a compatible PC or another compatible
device when using the phone without a SIM card.
Transfer contact list
To copy or synchronise data from your phone, the name of the device and the
settings must be in the list of transfer contacts. If you receive data from another
device (for example, a compatible mobile phone), the corresponding transfer
contact is automatically added to the list, using the contact data from the other
device. Server sync and PC sync are the original items in the list.
To add a new transfer contact to the list (for example a mobile phone), select
Menu > Settings > Connectivity > Data transfer > Options > Add contact >
Phone sync or Phone copy, and enter the settings according to the transfer type.
To edit the copy and synchronise settings, select a contact from the transfer
contact list and Options > Edit.
To delete a transfer contact, select it from the transfer contact list, select
Options > Delete.
Data transfer with a compatible device
For synchronization use Bluetooth wireless technology or a cable connection. The
other device must be activated for receiving data.
To start data transfer, select Menu > Settings > Connectivity > Data transfer and
the transfer contact from the list, other than Server sync or PC sync. According to
the settings, the selected data is copied or synchronised.
50
S e t t i n g s
Synchronise from a compatible PC
To synchronise data from calendar, notes, and contacts, install the Nokia PC Suite
software for your phone on the PC. Use Bluetooth wireless technology or a USB
data cable for the synchronization, and start the synchronization from the PC.
Synchronise from a server
To use a remote internet server, subscribe to a synchronization service. For more
information and the settings required for this service, contact your service
provider. You may receive the settings as a configuration message. See
Configuration settings service p. 10 and Configuration p. 53.
To start the synchronization from your phone, select Menu > Settings >
Connectivity > Data transfer > Server sync. Depending on the settings, select
Initializing sync or Initializing copy.
Synchronizing for the first time or after an interrupted synchronization may take
up to 30 minutes to complete.
USB data cable
You can use the USB data cable to transfer data between the phone and a
compatible PC. You can also use the USB data cable with Nokia PC Suite.
To activate the phone for data transfer or image printing, connect the data cable.
Confirm USB data cable connected. Select mode. and select from the following
options:
Nokia mode — to use the phone to interact with applications on a PC that has
Nokia PC Suite
Printing & Media — to connect the phone to a PC to synchronise it with Windows
Media Player (music, video)
Data storage — to connect to a PC that does not have Nokia software and use the
phone as a data storage
To change the USB mode, select Menu > Settings > Connectivity > USB data
cable > Nokia mode, Printing & Media, or Data storage.
■ Call
Select Menu > Settings > Call and from the following options:
51
S e t t i n g s
Call divert — to forward your incoming calls (network service). You may not be
able to forward your calls if some call restriction functions are active. See Call
barring in Security p. 54.
Anykey answer > On — to answer an incoming call by briefly pressing any key,
except the power key, the camera key, the left and right selection keys, or the end
key
Automatic redial > On — to make a maximum of 10 attempts to connect the call
after an unsuccessful call attempt
Voice clarity > Active — to enhance speech intelligibility especially in noisy
environments
Speed dialling > On — to dial the names and phone numbers assigned to the
speed-dialling keys 2 to 9 by pressing and holding the corresponding number key
Summary after call > On — to briefly display the approximate duration and cost
(network service) of the call after each call
Send my caller ID > Yes — to show your phone number to the person you are
calling (network service). To use the setting agreed upon with your service
provider, select Set by network.
Answ. when fold is opened > On — to answer an incoming call by opening the
fold.
Video sharing — to define video sharing settings.
■ Phone
Select Menu > Settings > Phone and from the following options:
Language settings — to set the display language of your phone, select Phone
language. Automatic selects the language according to the information on the
SIM card. To set a language for the voice playback, select Voice recognition
language. See Enhanced voice dialling p. 24 and Voice commands in My
shortcuts p. 46.
Memory status — to view the amount of used and available phone memory
Automatic keyguard — to set the keypad of your phone to lock automatically
after a preset time delay when the phone is in the standby mode and no function
of the phone has been used. Select On, and set the time.
52
S e t t i n g s
Security keyguard — to set the phone to ask for the security code when you
unlock the keyguard. Enter the security code, and select On.
Welcome note — to write the note that is shown when the phone is switched on
Phone updates — to check current software, or download and install software
updates
Network mode — to select dual mode (UMTS and GSM), UMTS, or GSM. You
cannot access this option during an active call.
Operator selection > Automatic — to set the phone to automatically select one of
the cellular networks available in your area. With Manual you can select a
network that has a roaming agreement with your service provider.
Help text activation — to select whether the phone shows help texts
Start-up tone > On — the phone plays a tone when switched on
Fold close handling — to select whether to return to standby mode or keep all
applications open when the fold is closed
Flight query > On — the phone asks whether to use the flight profile every time
when switched on. With flight profile all radio connections are switched off. The
flight profile should be used in areas sensitive to radio emissions.
■ Enhancements
This menu or the following options are shown only if the phone is or has been
connected to a compatible mobile enhancement.
Select Menu > Settings > Enhancements. Select an enhancement, and
depending on the enhancement, from the following options:
Default profile — to select the profile that you want to be automatically activated
when you connect to the selected enhancement
Lights — to set the lights permanently On. Select Automatic to set the lights on
for 15 seconds after a key press.
■ Configuration
You can configure your phone with settings required for certain services to
function correctly. Your service provider may also send you these settings. See
Configuration settings service p. 10.
Select Menu > Settings > Configuration and from the following options:
53
S e t t i n g s
Default config. sett.— to view the service providers saved in the phone. To set the
configuration settings of the service provider as default settings, select
Options > Set as default.
Activ. def. in all apps. — to activate the default configuration settings for
supported applications
Preferred access pt. — to view the saved access points. Scroll to an access point,
and select Options > Details to view the name of the service provider, data
bearer, and packet data access point or GSM dial-up number.
Connect to support — to download the configuration settings from your service
provider
Personal config. sett. — to add new personal accounts for various services
manually, and to activate or delete them. To add a new personal account if you
have not added any, select Add new; otherwise, select Options > Add new. Select
the service type, and select and enter each of the required parameters. The
parameters differ according to the selected service type. To delete or activate a
personal account, scroll to it, and select Options > Delete or Activate.
■ Security
When security features that restrict calls are in use (such as call barring, closed
user group, and fixed dialling) calls still may be possible to the official emergency
number programmed into your device.
Select Menu > Settings > Security and from the following options:
PIN code request and UPIN code request — to set the phone to ask for your PIN or
UPIN code every time the phone is switched on. Some SIM cards do not allow the
code request to be turned off.
PIN2 code request — to select whether the PIN2 code is required when using a
specific phone feature which is protected by the PIN2 code. Some SIM cards do
not allow the code request to be turned off.
Call barring service — to restrict incoming calls to and outgoing calls from your
phone (network service). A barring password is required.
Fixed dialling — to restrict your outgoing calls to selected phone numbers if this
function is supported by your SIM card. When the fixed dialling is on, GPRS
connections are not possible except while sending text messages over a GPRS
connection. In this case, the recipient’s phone number and the message centre
number must be included in the fixed dialling list.
54
G a l l e r y
Closed user group — to specify a group of people whom you can call and who can
call you (network service)
Security level > Phone — to set the phone to ask for the security code whenever a
new SIM card is inserted into the phone. If you select Memory, the phone asks for
the security code when the SIM card memory is selected, and you want to change
the memory in use.
Access codes — to change the security code, PIN code, UPIN code, PIN2 code, or
restriction password
Code in use — to select whether the PIN code or UPIN code should be active
Authority certificates or User certificates — to view the list of the authority or
user certificates downloaded into your phone. See Certificates p. 76.
Security module sett. — to view Security module details, select Module PIN
request, or change the module PIN and signing PIN. See also Access codes p. 9.
■ Restore factory settings
To reset some of the menu settings to their original values, select Menu >
Settings > Rest. factory sett. Enter the security code. If you have not created a
passcode, the phone will prompt you to create one. The names and phone
numbers saved in Contacts, are not deleted.
10. Gallery
In this menu you can manage images, video clips, music files,
themes, graphics, tones, recordings, and received files. Files are stored in the
phone memory or an attached microSD memory card and may be arranged in
folders.
Your phone supports an activation key system to protect acquired content.
Always check the delivery terms of any content and activation key before
acquiring them, as they may be subject to a fee.
Copyright protections may prevent some images, music (including ringing tones),
and other content from being copied, modified, transferred or forwarded.
To see the list of folders, select Menu > Gallery.
To see the available options of a folder, select a folder > Options.
To view the list of files in a folder, select a folder > Open.
55
P u s h t o t a l k
To see the available options of a file, select a file > Options.
To view the folders of the memory card when moving a file, scroll to the memory
card, and press the scroll key right.
■ Print images
Your device supports Nokia XPressPrint. To connect it to a compatible printer use
a data cable or send the image via Bluetooth to a printer supporting Bluetooth
technology. See Connectivity p. 47.
You can print images that are in the .jpg format. The images taken with the
camera are automatically saved in the .jpg format.
Select the image you want to print and Options > Print.
11. Push to talk
Select Menu > Push to talk.
Push to talk (PTT) over cellular is a two-way radio service available over a GPRS
cellular network (network service).
■ PTT channels
A PTT channel comprises a group of people (for example, friends or a workteam)
who joined the channel after they where invited to. When you call a channel, all
members joined to the channel hear the call simultaneously.
There are different types of PTT channels:
Public channel — Every channel member can invite other persons.
Private channel — Only persons which receive an invitation by the channel
creator can join in.
Provisioned channel — A permanent channel is created by the service provider.
You can set the status of each channel to Active or Inactive.
The number of active channels and the number of members per channel is
limited. Contact your service provider for details.
56
P u s h t o t a l k
Create a channel
To add a channel, select Menu > Push to talk > Add channel and enter the
settings in the form fields:
Channel name: — Enter a name for the new channel.
Channel status: — Select Active to set the channel active, or Inactive to disable
the channel.
Chnl. nickname: — Enter your nick name to be shown the new channel.
Chnl. security: > Public channel or Private channel
Image: — Select Change and an image from the Gallery or the Default graphic to
set a graphic for the new channel.
To send an invitation to the channel, select Yes when the phone requests it. The
recipient of the invitation is added to the member list of the channel when the
invitation is accepted. To send further invitations select Menu > Push to talk >
Channel list, a channel, and Options > Send invitation. To send the invitation, use
a text message.
To add a provisioned channel, select Menu > Push to talk > Add channel >
Options > Edit add. manually. Enter the Channel addr.: provided by your service
provider.
Receive an invitation
1. When you receive a text message invitation to a channel, Channel invitation
received: is displayed.
2. To view the nickname of the person who sent the invitation and the channel
address if the channel is not a private channel, select View.
3. To add the channel to your phone, select Save.
4. To set the status for the channel, select Active or Inactive.
To reject the invitation, select Exit > Yes, or select View > Discard > Yes.
■ Switch PTT on and off
To connect to the PTT service, select Menu > Push to talk > Switch PTT on, or
press and hold the PTT key.
indicates the PTT connection.
indicates that
the service is temporarily unavailable. If you have added channels to the phone,
you are automatically joined to the active channels.
57
P u s h t o t a l k
You may assign a default function to the PTT key to open the channel list, the
contacts list or a single channel or contact. See PTT settings p. 60.
To disconnect from the PTT service, select Switch PTT off.
■ Make and receive a PTT call
Warning: Do not hold the device near your ear when the loudspeaker is
in use, because the volume may be extremely loud.
To make a channel call, a one-to-one call, or a call to multiple recipients, you
must hold the PTT key as long as you talk. To listen to the response, release the
PTT key.
You may be able to check the login status of your contacts in Menu > Push to
talk > Contacts list. This service depends on your network operator and is only
available for subscribed contacts. To subscribe a contact, select
Options >Subscribe contact, or if one or more contacts are already marked
Subscribe marked.
or
indicates that the person wants not to be disturbed, but can receive callback
requests. indicates that the person has PTT not switched on.
indicate that the person is either available or unknown.
Make a channel call
To make a call to a channel, select Channel list in the PTT menu, scroll to the
desired channel, and press and hold the PTT key.
Make a one-to-one call
To start a one-to-one call from the list of contacts to which you have added the
PTT address, select Contacts > Names or Menu > Push to talk > Contacts list.
Scroll to a contact, and press and hold the PTT key.
To start a one-to-one call from the list of PTT channels, select Channel list, scroll
to the desired channel, and select Members. Scroll to the desired contact, and
press and hold the PTT key.
To start a one-to-one call from the list of callback requests you received, select
Callback inbox. Scroll to the desired nickname, and press and hold the PTT key.
58
P u s h t o t a l k
Make a PTT call to multiple recipients
You can select multiple PTT contacts from the contact list. The recipients receive
an incoming call and need to accept the call in order to participate. If supported
by your network operator, you also may select contacts with a phone number but
without PTT number. For details, contact your network operator.
1. Select Menu > Push to talk > Contacts list, and mark the desired contacts.
2. Press and hold the PTT key to start the call. The participating contacts are
shown on the display, as soon as they join the call.
3. Press and hold the PTT key to talk. Release the PTT key to hear the response.
4. Press the end key to terminate the call.
Receive a PTT call
A short tone notifies you of an incoming PTT call. Information, such as channel,
phone number, or nickname (network service) of the caller are displayed.
You can either accept or reject an incoming one-to-one call if you have set the
phone to first notify you of the one-to-one calls.
When you press and hold the PTT key while the caller is talking, you hear a
queuing tone, and Queuing is displayed. Press and hold the PTT key, and wait for
the other person to finish; then you can talk immediately.
■ Callback requests
If you make a one-to-one call and do not get a response, you can send a request
for the person to call you back.
Send a callback request
You can send a callback request in the following ways:
To send a callback request from the contacts list in the Push to talk menu, select
Contacts list. Scroll to a contact, and select Options > Send PTT callback.
To send a callback request from Contacts, search for the desired contact, and
select Details. Scroll to the PTT address, and select Options > Send PTT callback.
To send a callback request from the channel list in the PTT menu, select Channel
list, and scroll to the desired channel. Select Members, scroll to the desired
contact, and select Options > Send PTT callback.
59
P u s h t o t a l k
To send a callback request from the callback request list in the Push to talk menu,
select Callback inbox. Scroll to a contact, and select Options > Send PTT callback.
Respond to a callback request
When someone sends you a callback request, Callback request received is
displayed in the standby mode.
To open the Callback inbox, select View. The list of nicknames of the persons who
have sent you callback requests is shown.
To make a one-to-one call, select the request and press and hold the PTT key.
To send a call request back to the sender, select Options > Send PTT callback.
To delete the request, select Delete.
To save a new contact or to add the PTT address to a contact from a received
callback request, select Options > Save as or Add to contact.
■ Add a one-to-one contact
You can save the names of persons to whom you often make one-to-one calls in
the following ways:
To add a PTT address to a name in Contacts, search for the desired contact, select
Details > Options > Add detail > PTT address. A contact will only appear in the
PTT contact list, if the PTT address is entered.
To add a contact to the PTT contacts list, select Menu > Push to talk > Contacts
list > Options > Add contact.
To add a contact from the channel list, connect to the PTT service, select Channel
list, and scroll to the desired channel. Select Members, scroll to the member
whose information you want to save, and select Options. To add a new contact,
select Save as. To add a PTT address to a name in Contacts, select Add to contact.
■ PTT settings
Select Menu >Push to talk > PTT settings.
1 to 1 calls > On — to select the phone to allow the reception of incoming one-
to-one calls. To make but not receive one-to-one calls, select Off. The service
provider may offer some services that override these settings. To set the phone to
first notify you of incoming one-to-one calls with a ringing tone, select Notify.
PTT key default function — to set the PTT key to following functions: Open contact
list, Open channel list, Call contact/group. Select a contact, a group, or Call PTT
60
M e d i a
channel and select a channel. When you press and hold the PTT key, the selected
function will be performed.
Show my login status — to enable or disable the sending of the login status
PTT status in startup > Yes or Ask first— to set the phone to automatically
connect to the PTT service when you switch the phone on
Push to talk when roaming — to switch the PTT service on or off when the phone
is used outside of the home network
Send my PTT address > No — to hide your PTT address from channel and
one-to-one calls
■ Configuration settings
You may receive the settings for connecting to the service from your service
provider. See Configuration settings service p. 10. You can enter the settings
manually. See Configuration p. 53.
To select the settings for connecting to the service, select Menu > Push to talk >
Configuration settings. Select from the following options:
Configuration — to select a service provider, Default, or Personal config. for PTT
service. Only the configurations that support the PTT service are shown.
Account — to select a PTT service account contained in the active configuration
settings
Other parameters are PTT user name, Default nickname, PTT password, Domain,
and Server address.
■ Web
Select Menu > Push to talk > Web to access the internet site of your PTT provider.
12. Media
When taking and using images or video clips, obey all laws and
respect local customs as well as privacy and legitimate rights of others, including
copyrights.
You can take photos or record live video clips with the built-in 1.3 megapixel
camera. The camera produces pictures in jpeg format and video clips in 3gpp
61
M e d i a
format. The camera lens is on the front of the phone. The colour display works as
a viewfinder.
■ Camera
When taking and using images or video clips, obey all laws and respect local
customs as well as privacy and legitimate rights of others, including copyrights.
The camera produces pictures in jpeg format and video clips in 3gpp format. The
camera lens is on the front of the phone. The colour display works as a viewfinder.
Take a photo
To open the camera viewfinder, select Menu > Media > Camera.
You can also take a photo when the phone is folded. Press left or right selection
keys and select Camera.
To zoom in and out in camera mode, press volume keys up or down.
To take an image, select Capture, or press camera key. The phone saves the
images on the memory card.
Select Options to set Night mode on if the lighting is dim, Self-timer on to
activate the self-timer, Img. sequence on to take images in a fast sequence. With
the highest image size setting three images are taken in a sequence, with other
size settings eight images are taken.
Select Options > Settings >Image preview time and a preview time to display the
taken images on the display. During the preview time, select Back to take another
image or Send to send the image as a multimedia message.
Your device supports an image capture resolution of 1024 x 1280 pixels.
Self-portrait
To take a self-portrait photo, select Menu > Media > Camera and close the fold.
To take a picture, press the camera key. To view the photo, open the fold.
Camera and video options
To use a filter, select Options > Effects > Normal, Grayscale, Sepia, Negative.
To change the camera and video settings, select Options > Settings.
62
M e d i a
■ Video
You can record video clips in .3gp format. Available recording time depends on
the video clip length and quality settings.
The length and file size of the clips may vary depending on the selected quality
and available memory. To set the quality of your video clips, select Menu >
Media > Video > Options > Settings >Video clip quality > High, Normal or Basic.
To select the file size limit, select Menu > Media > Video > Options > Settings >
Video clip length. Default means that the file size is limited so that it fits into a
multimedia message (multimedia message size can vary among devices).
Maximum means that all available memory is used. Available memory depends
on where the video clip is stored.
Record a video clip
Select Menu > Media > Video > Record. You can also press and hold the camera
key. To pause the recording, select Pause; to resume the recording, select
Continue. To stop the recording, select Stop. The phone saves the recording in
Gallery > Video clips.
To zoom in or out, press the volume key up or down, or scroll left and right.
■ Music player
Your phone includes a music player for listening to music tracks, recordings or,
other sound files that you have transferred to the phone with the Nokia Audio
Manager application, which is part of Nokia PC Suite. See Nokia PC Suite p. 78.
Music files stored in a folder in the phone memory or in a folder of the memory
card, will automatically be detected and added to the default track list.
To open the music player, select Menu > Media > Music player.
Playing the music tracks
Warning: Listen to music at a moderate level. Continuous exposure to
high volume may damage your hearing. Do not hold the device near
your ear when the loudspeaker is in use, because the volume may be
extremely loud.
Operate the music player with the keys on the phone or with the virtual keys on
the display.
63
M e d i a
When you open the Music player menu, the details of the first track on the
default track list are shown. To play, select
To adjust the volume level, use the volume keys on the side of the phone.
To pause the playing, select
To stop the playing, press and hold the end key
To skip to the next track, select . To skip to the beginning of the previous
track, select
To rewind the current track, select and hold
.
.
.
. To fast forward the current
. Release the key at the position you want.
track, select and hold
Options in Music player
In the Music player menu, music tracks can be saved in the following categories:
All songs — to view all music tracks
Playlists— to create new playlists, check the currently playing music, view
recently added playlists or tracks, find the tracks played most often, and view all
playlists
Artists — to view all music tracks by the artist’s name
Albums— to view music tracks by albums
Genres — to view music tracks by genres
Videos — to view a list of music videos
Settings
In the Settings menu, the following options may be available:
Shuffle — to play music tracks in random order
Repeat— to repeat the current song, all songs, or to turn off repeat
Equaliser — to open the list of media equaliser sets. See Equaliser p. 65.
Stereo widening — to enhance the audio output of the phone by enabling a wider
stereo sound effect
Other options
Go to Music player— to go to the main music menu
Now playing — to view the track currently playing
Add to playlist— to add the current song to the Favorites track list.
64
M e d i a
Downloads— to download music through web.
Web page — to go the browser
Mute audio — to mute the audio
Play via Bluetooth — to connect and play music through a Bluetooth enabled
audio accessory using Bluetooth connection.
■ Voice recorder
You can record pieces of speech, sound, or an active call, and save them in
Gallery. This is useful when recording a name and phone number to write down
later.
The recorder cannot be used when a data call or GPRS connection is active.
Record sound
1. Select Menu > Media > Voice recorder.
To use the graphical keys
,
, or
on the display, scroll left or right to
the desired key, and select it.
2. To start the recording, select
. To start the recording during a call, select
Options > Record. While recording a call, all parties to the call hear a faint
beeping sound. When recording a call, hold the phone in the normal position
near to your ear. To pause the recording, select
.
3. To end the recording, select
. The recording is saved in Gallery >
Recordings.
To listen to the latest recording, select Options > Play last recorded.
To send the last recording, select Options > Send last recorded.
To see the list of recordings in Gallery, select Options > Recordings list >
Recordings.
■ Equaliser
To control the sound quality when using the music player by amplify or diminish
frequency bands.
Select Menu > Media > Equaliser.
To activate a set, scroll to one of the equaliser sets, and select Activate.
65
O r g a n i s e r
To view, edit, or rename a selected set, select Options > View, Edit, or Rename.
Not all sets can be edited or renamed.
■ Stereo widening
Stereo widening enhances the audio output of the phone by enabling a wider
stereo sound effect. To change the setting, select Menu > Media > Stereo
widening.
13. Organiser
■ Alarm clock
You can set the phone to alarm at a desired time. Select Menu > Organiser >
Alarm clock.
To set the alarm, select Alarm time, and enter the alarm time. To change the
alarm time when the alarm time is set, select On.
To set the phone to alert you on selected days of the week, select Repeat alarm.
To select the alarm tone, select Alarm tone:.
To set a snooze time-out, select Snooze time-out and the time.
Stop the alarm
The phone sounds an alert tone even if the phone was switched off. To stop the
alarm, select Stop. If you let the phone continue to sound the alarm for a minute
or select Snooze, the alarm stops for the time you set in Snooze time-out, then
resumes.
If the alarm time is reached while the device is switched off, the device switches
itself on and starts sounding the alarm tone. If you select Snooze, the device
switches off, then switches on again after the snooze time is reached. If you
select Stop, the device asks whether you want to activate the device for calls.
Select No to switch off the device or Yes to make and receive calls. Do not select
Yes when wireless phone use may cause interference or danger.
■ Calendar
Select Menu > Organiser > Calendar.
66
O r g a n i s e r
The current day is indicated by a frame. If there are any notes set for the day, the
day is in bold type, and the beginning of the note is shown below the calendar. To
view the day notes, select View. To view a week, select Options > Week view. To
delete all notes in the calendar, select the month or week view, and select
Options > Delete all notes.
To set the date, time, time zone, date or time format, date separator, default
view, or the first day of the week, select Settings.
To set the phone to delete old notes automatically after a specified time, select
Auto-delete notes.
Make a calendar note
Select Menu > Organiser > Calendar. Scroll to the date, and select Options >
Make a note and one of the following note types:
Meeting,
Call,
Birthday, Memo, or Reminder. Fill in the fields.
Note alarm
The phone displays the note and if set, sounds a tone. With a call note
on the
display, to call the displayed number, press the call key. To stop the alarm and to
view the note, select View. To stop the alarm for 10 minutes, select Snooze.
To stop the alarm without viewing the note, select Exit.
■ To-do list
To save a note for a task that you must do, select Menu > Organiser > To-do list.
To make a note if no note is added, select Add note. Fill in the fields, and select
Save.
To view a note, scroll to it, and select View. While viewing a note, you can also
select an option to edit the attributes. You can also select an option to delete the
selected note and delete all the notes that you have marked as done.
■ Notes
To write and send notes, select Menu > Organiser > Notes.
To make a note if no note is added, select Add note. Write the note, and select
Save.
67
O r g a n i s e r
■ Calculator
The calculator in your phone provides basic arithmetic and trigonometric
functions, calculates the square and the square root, the inverse of a number, and
converts currency values.
Note: This calculator has limited accuracy and is designed for simple
calculations.
Select Menu > Organiser > Calculator. When 0 is displayed on the screen, enter
the first number in the calculation. Press # for a decimal point. Scroll to the
desired operation or function or select it from the Options. Enter the second
number. Repeat this sequence as many times as it is necessary. To start a new
calculation, first select and hold Clear.
To perform a currency conversion, select Menu > Organiser > Calculator. To save
the exchange rate, select Options > Exchange rate. Select either of the displayed
options. Enter the exchange rate, press # for a decimal point, and select OK. The
exchange rate remains in the memory until you replace it with another one. To
perform the currency conversion, enter the amount to be converted, and select
Options > To home or To foreign.
Note: When you change base currency, you must enter new exchange
rates because all previously set exchange rates are cleared.
■ Countdown timer
To start the countdown timer, select Menu > Organiser > Countd. timer >
Normal timer, enter the alarm time, and write a note text that is displayed when
the time expires. To start the countdown timer, select Start. To change the
countdown time, select Change time. To stop the timer, select Stop timer.
To have an interval timer with up to 10 intervals started, first enter the intervals.
Select Menu > Organiser > Countd. timer > Interval timer. To start the timer,
select Start timer > Start.
■ Stopwatch
You can measure time, take intermediate times, or take lap times using the
stopwatch. During timing, the other functions of the phone can be used. To set
the stopwatch timing in the background, press the end key.
Using the stopwatch or allowing it to run in the background when using other
features increases the demand on battery power and reduces the battery life.
Select Menu > Organiser > Stopwatch and from the following options:
68
A p p l i c a t i o n s
Split timing — to take intermediate times. To start the time observation, select
Start. Select Split every time that you want to take an intermediate time. To stop
the time observation, select Stop.
To save the measured time, select Save.
To start the time observation again, select Options > Start. The new time is
added to the previous time. To reset the time without saving it, select Reset.
Lap timing — to take lap times
Continue — to view the timing that you have set in the background
Show last time — to view the most recently measured time if the stopwatch is not
reset
View times or Delete times — to view or delete the saved times
14. Applications
In this menu you can manage applications and games. These files are
stored in the phone memory or an attached microSD memory card and may be
arranged in folders.
For options to format or lock and unlock the memory card see Memory card p. 15.
■ Launch a game
Your phone software includes some games.
Select Menu > Applications > Games. Scroll to the desired game, and select
Open.
■ Launch an application
Your phone software includes some Java applications.
Select Menu > Applications > Collection. Scroll to an application, and select
Open.
■ Some application options
Update version — to check if a new version of the application is available for
download from Web (network service)
69
A p p l i c a t i o n s
Web page — to provide further information or additional data for the application
from an internet page (network service), if available
App. access — to restrict the application from accessing the network
■ Download an application
Your phone supports J2ME Java applications. Make sure that the application is
compatible with your phone before downloading it.
Important: Only install and use applications and other software from
trusted sources, such as applications that are Symbian Signed or have
passed the Java VerifiedTM testing.
You can download new Java applications and games in different ways.
Use the Nokia Application Installer from PC Suite to download the applications to
your phone, or select Menu > Applications > Options > Downloads > App.
downloads; the list of available bookmarks is shown. See Bookmarks p. 73.
For the availability of different services and pricing contact your service provider.
Your device may have preinstalled bookmarks and links for third-party internet
sites. You may also access other third-party sites through your device. Third-
party sites are not affiliated with Nokia, and Nokia does not endorse or assume
liability for them. If you choose to access such sites, you should take precautions
for security or content.
■ Presenter
The presenter enables you to control slide presentations (compatible with
Microsoft Office PowerPoint), a software DVD, an MP3 player, or other PC
applications remotely from your device.
To use applications other than slide presentations and desktop mode, you must
create a corresponding custom profile on the PC application.
Before you can use the application you must do the following:
1. Install the Nokia Presenter PC application on your PC.
This component is available for download on the Nokia website. See Nokia
support p. 11.
2. Launch and configure the PC component. Make sure that the selected
incoming Bluetooth serial port (COM port) corresponds to the one defined in
the Bluetooth software settings on the Bluetooth device of your PC. For
70
S I M s e r v i c e s
details, refer to the PC component documentation and Set up a Bluetooth
connection p. 48.
3. Open the slide presentation, or start the application you want to control
remotely from your phone.
Select Applications > Collection > Presenter > Open > Connect and the device
you want to connect.
When the Bluetooth Connection Successful dialog appears on your PC screen,
you must click on it to confirm the Bluetooth connection.
The list of available application types is displayed. Select Open to access the
desired application. Select Options > Settings to set the Speaker notes size for
the speaker notes, and Presentation timer (in minutes) to optimise the slide
presentation time available. To save the settings, select Options > Back.
After you select the slide presentation, browse or skip slides, or jump ahead by
using the scroll key. To view your speaker notes, select Notes. To point things out
on the slides, select Pointer to activate a small black round marker that you
control with the scroll key. Select Options > Slide list to return to the slide list.
Select Options > Applications list to return to the list of applications.
To control the mouse pointer (the cursor) remotely from the phone, select the
desktop mode. After you open the desktop, the phone automatically controls your
mouse pointer. To return to the list of applications, select Options > Applications
list.
To quit the presenter, select Options > Exit.
15. SIM services
Your SIM card may provide additional services. You can access
this menu only if it is supported by your SIM card. The name and contents of the
menu depend on the available services.
For availability and information on using SIM card services, contact your SIM
card vendor. This may be the service provider, network operator, or other vendor.
To set the phone to show you the confirmation messages sent between your
phone and the network when you are using the SIM services, select Menu >
Settings > Phone > Confirm SIM service actions > Yes.
Accessing these services may involve sending messages or making a phone call
for which you may be charged.
71
W e b
16. Web
You can access various mobile internet services with your phone
browser.
Important: Use only services that you trust and that offer adequate
security and protection against harmful software.
Check the availability of these services, pricing, and instructions with your
service provider.
With the phone browser you can view the services that use wireless markup
pages. Appearance may vary due to screen size. You may not be able to view all
details of the internet pages.
■ Set up browsing
You may receive the configuration settings required for browsing as a
configuration message from the service provider that offers the service that you
want to use. See Configuration settings service p. 10. You can also enter all the
configuration settings manually. See Configuration p. 53.
■ Connect to a service
Ensure that the correct configuration settings of the service are activated.
1. To select the settings for connecting to the service, select Menu > Web >
Settings > Configuration settings.
2. Select Configuration. Only the configurations that support browsing service
are shown. Select a service provider, Default, or Personal config. for browsing.
See Set up browsing p. 72.
3. Select Account and a browsing service account contained in the active
configuration settings.
4. Select Display terminal window > Yes to perform manual user authentication
for intranet connections.
Make a connection to the service in one of the following ways:
•
•
Select Menu > Web > Home; or in the standby mode, press and hold 0.
To select a bookmark of the service, select Menu > Web > Bookmarks.
72
W e b
•
•
To select the last URL, select Menu > Web > Last web address.
To enter the address of the service, select Menu > Web > Go to address. Enter
the address of the service, and select OK.
■ Browse pages
After you make a connection to the service, you can start browsing its pages. The
function of the phone keys may vary in different services. Follow the text guides
on the phone display. For more information, contact your service provider.
Browse with phone keys
To browse through the page, scroll in any direction.
To select an item, press the call key, or select Select.
To enter letters and numbers, press the 0 to 9 keys. To enter special characters,
press *.
Direct calling
While browsing, you can make a phone call, and save a name and a phone
number from a page.
■ Bookmarks
You can save page addresses as bookmarks in the phone memory.
1. While browsing, select Options > Bookmarks; or in the standby mode, select
Menu > Web > Bookmarks.
2. Scroll to a bookmark, and select it, or press the call key to make a connection
to the page associated with the bookmark.
3. Select Options to view, edit, delete, or send the bookmark; to create a new
bookmark; or to save the bookmark to a folder.
Receive a bookmark
When you have received a bookmark that is sent as a bookmark, 1 bookmark
received is displayed. To view the bookmark, select Show.
73
W e b
■ Appearance settings
While browsing, select Options > Other options > Appear. settings; or in the
standby mode, select Menu > Web > Settings > Appearance settings and from
the following options:
Text wrapping — to select how the text shall appear on the display
Font size — to set the font size
Show images > No — to hide images on the page
Alerts > Alert for unsecure connection > Yes — to set the phone to alert when a
secure connection changes to an unsecure one during browsing
Alerts > Alert for unsecure items > Yes — to set the phone to alert when a secure
page contains an unsecure item. These alerts do not guarantee a secure
connection. For more information, see Browser security p. 76.
Character encoding > Content encoding — to select the encoding for the browser
page content
Character encoding > Unicode (UTF-8) web addresses > On — to set the phone to
send a URL as a UTF-8 encoding
Screen size > Full or Small— to set the screen layout
Show page title > Yes or No— to set the phone to display the title of the web
page.
JavaScript > Enable — to enable the Java scripts
■ Security settings
Cookies
A cookie is data that a site saves in the cache memory of your phone. Cookies are
saved until you clear the cache memory. See Cache memory p. 76.
While browsing, select Options > Other options > Security > Cookie settings; or
in the standby mode, select Menu > Web > Settings > Security settings >
Cookies. To allow or prevent the phone from receiving cookies, select Allow or
Reject.
Scripts over secure connection
You can select whether to allow the running of scripts from a secure page. The
phone supports WML scripts.
74
W e b
While browsing, to allow the scripts, select Options > Other options > Security >
WMLScript sett.; or in the standby mode, select Menu > Web > Settings >
Security settings > WMLScripts over secure connection > Allow.
■ Download settings
To automatically save all downloaded files in Gallery, select Menu > Web >
Settings > Downloading settings > Automatic saving > On.
■ Service inbox
The phone is able to receive service messages sent by your service provider
(network service). Service messages are notifications (for example, news
headlines), and they may contain a text message or an address of a service.
To access the Service inbox in the standby mode, when you have received a
service message, select Show. If you select Exit, the message is moved to the
Service inbox. To access the Service inbox later, select Menu > Web > Service
inbox.
To access the Service inbox while browsing, select Options > Other options >
Service inbox. Scroll to the message you want, and to activate the browser and
download the marked content, select Retrieve. To display detailed information on
the service notification or to delete the message, select Options > Details or
Delete.
Service inbox settings
Select Menu > Web > Settings > Service inbox settings.
To set whether you want to receive service messages, select Service messages >
On or Off.
To set the phone to receive service messages only from content authors approved
by the service provider, select Message filter > On. To view the list of the
approved content authors, select Trusted channels.
To set the phone to automatically activate the browser from the standby mode
when the phone has received a service message, select Automatic connection >
On. If you select Off, the phone activates the browser only after you select
Retrieve when the phone has received a service message.
75
W e b
■ Cache memory
A cache is a memory location that is used to store data temporarily. If you have
tried to access or have accessed confidential information requiring passwords,
empty the cache after each use. The information or services you have accessed is
stored in the cache.
To empty the cache while browsing, select Options > Other options > Clear the
cache; in the standby mode, select Menu > Web > Clear the cache.
■ Browser security
Security features may be required for some services, such as online banking or
shopping. For such connections you need security certificates and possibly a
security module, which may be available on your SIM card. For more information,
contact your service provider.
Security module
The security module improves security services for applications requiring a
browser connection, and allows you to use a digital signature. The security
module may contain certificates as well as private and public keys. The
certificates are saved in the security module by the service provider.
To view or change the security module settings, select Menu > Settings >
Security > Security module settings.
Certificates
Important: Even if the use of certificates makes the risks involved in
remote connections and software installation considerably smaller,
they must be used correctly in order to benefit from increased security.
The existence of a certificate does not offer any protection by itself; the
certificate manager must contain correct, authentic, or trusted certificates for
increased security to be available. Certificates have a restricted lifetime. If
"Expired certificate" or "Certificate not valid yet" is shown even if the certificate
should be valid, check that the current date and time in your device are correct.
Before changing any certificate settings, you must make sure that you really trust
the owner of the certificate and that the certificate really belongs to the listed
owner.
There are three kinds of certificates: server certificates, authority certificates, and
user certificates. You may receive these certificates from your service provider.
76
P C c o n n e c t i v i t y
Authority certificates and user certificates may also be saved in the security
module by the service provider.
To view the list of the authority or user certificates downloaded into your phone,
select Menu > Settings > Security > Authority certificates or User certificates.
is displayed during a connection, if the data transmission between the
phone and the content server is encrypted.
The security icon does not indicate that the data transmission between the
gateway and the content server (or place where the requested resource is stored)
is secure. The service provider secures the data transmission between the
gateway and the content server.
Digital signature
You can make digital signatures with your phone if your SIM card has a security
module. Using the digital signature can be the same as signing your name to a
paper bill, contract, or other document.
To make a digital signature, select a link on a page, for example, the title of the
book you want to buy and its price. The text to sign, which may include the
amount and date, is shown.
Check that the header text is Read and that the digital signature icon
is
shown.
Note: If the digital signature icon does not appear, there is a security
breach, and you should not enter any personal data such as your
signing PIN.
To sign the text, read all of the text first, and select Sign.
The text may not fit within a single screen. Therefore, make sure to scroll through
and read all of the text before signing.
Select the user certificate you want to use. Enter the signing PIN. The digital
signature icon disappears, and the service may display a confirmation of your
purchase.
17. PC connectivity
You can send and receive e-mail, and access the internet when your phone is
connected to a compatible PC through a Bluetooth or a data cable connection.
77
P C c o n n e c t i v i t y
You can use your phone with a variety of PC connectivity and data
communications applications.
■ Nokia PC Suite
With Nokia PC Suite you can synchronise contacts, calendar, notes, and to-do
notes between your phone and the compatible PC or a remote internet server
(network service). You may find more information and PC Suite on the Nokia
■ Packet data, HSCSD, and CSD
With your phone you can use the packet data, high-speed circuit switched data
(HSCSD), and circuit switched data (CSD, GSM data) data services. For availability
and subscription to data services, contact your network operator or service
provider. See Modem settings p. 49.
The use of HSCSD services consumes the phone battery faster than normal voice
or data calls.
■ Bluetooth
Use the Bluetooth technology to connect your compatible laptop to the internet.
Your phone must have activated a service provider that supports internet access
and your PC has to support Bluetooth PAN (personal area network profile). After
connecting to the network access point (NAP) service of the phone and pairing
with your PC your phone automatically opens a packet data connection to the
internet. PC Suite software installation is not necessary when using the NAP
service of the phone. See Bluetooth wireless technology p. 47.
■ Data communication applications
For information on using a data communication application, refer to the
documentation provided with it.
Making or answering phone calls during a computer connection is not
recommended, as it might disrupt the operation.
For better performance during data calls, place the phone on a stationary surface
with the keypad facing downward. Do not move the phone by holding it in your
hand during a data call.
78
B a t t e r y i n f o r m a t i o n
18. Battery information
■ Charging and discharging
Your device is powered by a rechargeable battery. The battery can be charged and
discharged hundreds of times, but it will eventually wear out. When the talk and
standby times are noticeably shorter than normal, replace the battery. Use only
Nokia approved batteries, and recharge your battery only with Nokia approved
chargers designated for this device.
If a replacement battery is being used for the first time or if the battery has not
been used for a prolonged period, it may be necessary to connect the charger and
then disconnect and reconnect it to begin charging the battery.
Unplug the charger from the electrical plug and the device when not in use. Do
not leave fully charged battery connected to a charger, since overcharging may
shorten its lifetime. If left unused, a fully charged battery will lose its charge over
time.
If the battery is completely discharged, it may take several minutes before the
charging indicator appears on the display or before any calls can be made.
Use the battery only for its intended purpose. Never use any charger or battery
that is damaged.
Do not short-circuit the battery. Accidental short-circuiting can occur when a
metallic object such as a coin, clip, or pen causes direct connection of the
positive (+) and negative (-) terminals of the battery. (These look like metal strips
on the battery.) This might happen, for example, when you carry a spare battery
in your pocket or purse. Short-circuiting the terminals may damage the battery
or the connecting object.
Leaving the battery in hot or cold places, such as in a closed car in summer or
winter conditions, will reduce the capacity and lifetime of the battery. Always try
to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot
or cold battery may not work temporarily, even when the battery is fully charged.
Battery performance is particularly limited in temperatures well below freezing.
Do not dispose of batteries in a fire as they may explode. Batteries may also
explode if damaged. Dispose of batteries according to local regulations. Please
recycle when possible. Do not dispose as household waste.
Do not dismantle or shred cells or batteries. In the event of a battery leak, do not
allow the liquid to come in contact with the skin or eyes. In the event of such a
leak, flush your skin or eyes immediately with water, or seek medical help.
79
C a r e a n d m a i n t e n a n c e
■ Nokia battery authentication
Always use original Nokia batteries for your safety. To check that you are getting
an original Nokia battery, purchase it from an authorised Nokia dealer, look for
the Nokia Original Enhancements logo on the packaging, and inspect the
hologram label using the following steps:
Successful completion of the steps is not a total assurance of the authenticity of
the battery. If you have any reason to believe that your battery is not an
authentic original Nokia battery, you should refrain from using it, and take it to
the nearest authorised Nokia service point or dealer for assistance. Your
authorised Nokia service point or dealer will inspect the battery for authenticity.
If authenticity cannot be verified, return the battery to the place of purchase.
Authenticate hologram
1. When looking at the hologram on the label, you
should see the Nokia connecting hands symbol from
one angle and the Nokia Original Enhancements
logo when looking from another angle.
2. When you angle the hologram left, right, down, and
up, you should see 1, 2, 3, and 4 dots on each side
respectively.
What if your battery is not authentic?
If you cannot confirm that your Nokia battery with the
hologram on the label is an authentic Nokia battery,
please do not use the battery. Take it to the nearest
authorised Nokia service point or dealer for assistance. The use of a battery that
is not approved by the manufacturer may be dangerous and may result in poor
performance and damage to your device and its enhancements. It may also
invalidate any approval or warranty applying to the device.
Care and maintenance
Your device is a product of superior design and craftsmanship and should be
treated with care. The suggestions below will help you protect your warranty
coverage.
80
C a r e a n d m a i n t e n a n c e
•
Keep the device dry. Precipitation, humidity and all types of liquids or
moisture can contain minerals that will corrode electronic circuits. If your
device does get wet, remove the battery and allow the device to dry
completely before replacing it.
•
•
•
Do not use or store the device in dusty, dirty areas. Its moving parts and
electronic components can be damaged.
Do not store the device in hot areas. High temperatures can shorten the life of
electronic devices, damage batteries, and warp or melt certain plastics.
Do not store the device in cold areas. When the device returns to its normal
temperature, moisture can form inside the device and damage electronic
circuit boards.
•
•
Do not attempt to open the device other than as instructed in this guide.
Do not drop, knock, or shake the device. Rough handling can break internal
circuit boards and fine mechanics.
•
•
•
•
•
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean
the device.
Do not paint the device. Paint can clog the moving parts and prevent proper
operation.
Do not touch the main display with hard or angular materials. Objects like
earrings or jewelry may scratch the display.
Use a soft, clean, dry cloth to clean any lenses (such as camera, proximity
sensor, and light sensor lenses).
Use only the supplied or an approved replacement antenna. Unauthorised
antennas, modifications, or attachments could damage the device and may
violate regulations governing radio devices.
•
•
Use chargers indoors.
Always create a backup of data you want to keep, such as contacts and
calendar notes.
•
To reset the device from time to time for optimum performance, power off
the device and remove the battery.
These suggestions apply equally to your device, battery, charger, or any
enhancement. If any device is not working properly, take it to the nearest
authorised service facility for service.
81
A d d i t i o n a l s a f e t y i n f o r m a t i o n
Disposal
The crossed-out wheeled-bin symbol on your product, literature, or
packaging reminds you that all electrical and electronic products, batteries,
and accumulators must be taken to separate collection at the end of their
working life. This requirement applies to the European Union and other
locations where separate collection systems are available. Do not dispose of
these products as unsorted municipal waste.
Return the products to collection to prevent possible harm to the
environment or human health from uncontrolled waste disposal and to
promote the sustainable reuse of material resources. Collection information
is available from the product retailer, local waste authorities, national
producer responsibility organizations, or your local Nokia representative.
For more information, see product Eco-Declaration or country-specific
Additional safety information
■ Small children
Your device and its enhancements may contain small parts. Keep them out of the
reach of small children.
■ Operating environment
Remember to follow any special regulations in force in any area, and always
switch off your device when its use is prohibited or when it may cause
interference or danger. Use the device only in its normal operating positions. This
device meets RF exposure guidelines when used either in the normal use position
against the ear or when positioned at least 2.2 centimeters (7/8 inch) away from
the body. When a carry case, belt clip or holder is used for body-worn operation,
it should not contain metal and should position the device the above-stated
distance from your body.
To transmit data files or messages, this device requires a quality connection to
the network. In some cases, transmission of data files or messages may be
delayed until such a connection is available. Ensure that the above separation
distance instructions are followed until the transmission is completed.
Parts of the device are magnetic. Metallic materials may be attracted to the
device. Do not place credit cards or other magnetic storage media near the
device, because information stored on them may be erased.
82
A d d i t i o n a l s a f e t y i n f o r m a t i o n
■ Medical devices
Operation of any radio transmitting equipment, including wireless phones, may
interfere with the functionality of inadequately protected medical devices.
Consult a physician or the manufacturer of the medical device to determine if
they are adequately shielded from external RF energy or if you have any
questions. Switch off your device in health care facilities when any regulations
posted in these areas instruct you to do so. Hospitals or health care facilities may
be using equipment that could be sensitive to external RF energy.
Implanted medical devices
Manufacturers of medical devices recommend that a minimum separation of
15.3 centimeters (6 inches) should be maintained between a wireless device and
an implanted medical device, such as a pacemaker or implanted cardioverter
defibrillator to avoid potential interference with the medical device. Persons who
have such devices should:
•
Always keep the wireless device more than 15.3 centimeters (6 inches) from
the medical device when the wireless device is turned on
•
•
Do not carry the wireless device in a breast pocket
Hold the wireless device to the ear opposite the medical device to minimize
the potential for interference.
•
•
Turn the wireless device off immediately if there is any reason to suspect that
interference is taking place.
Read and follow the directions from the manufacturer of their implanted
medical device.
If you have any questions about using your wireless device with an implanted
medical device, consult your health care provider.
Hearing aids
Some digital wireless devices may interfere with some hearing aids. If
interference occurs, consult your service provider.
■ Vehicles
RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles such as electronic fuel injection systems, electronic
antiskid (antilock) braking systems, electronic speed control systems, and air bag
systems. For more information, check with the manufacturer or its representative
of your vehicle or any equipment that has been added.
83
A d d i t i o n a l s a f e t y i n f o r m a t i o n
Only qualified personnel should service the device, or install the device in a
vehicle. Faulty installation or service may be dangerous and may invalidate any
warranty that may apply to the device. Check regularly that all wireless device
equipment in your vehicle is mounted and operating properly. Do not store or
carry flammable liquids, gases, or explosive materials in the same compartment
as the device, its parts, or enhancements. For vehicles equipped with an air bag,
remember that air bags inflate with great force. Do not place objects, including
installed or portable wireless equipment in the area over the air bag or in the air
bag deployment area. If in-vehicle wireless equipment is improperly installed and
the air bag inflates, serious injury could result.
Using your device while flying in aircraft is prohibited. Switch off your device
before boarding an aircraft. The use of wireless devices in an aircraft may be
dangerous to the operation of the aircraft, disrupt the wireless telephone
network, and may be illegal.
■ Potentially explosive environments
Switch off your device when in any area with a potentially explosive atmosphere,
and obey all signs and instructions. Potentially explosive atmospheres include
areas where you would normally be advised to turn off your vehicle engine.
Sparks in such areas could cause an explosion or fire resulting in bodily injury or
even death. Switch off the device at refueling points such as near gas pumps at
service stations. Observe restrictions on the use of radio equipment in fuel
depots, storage, and distribution areas; chemical plants; or where blasting
operations are in progress. Areas with a potentially explosive atmosphere are
often, but not always, clearly marked. They include below deck on boats,
chemical transfer or storage facilities and areas where the air contains chemicals
or particles such as grain, dust, or metal powders. You should check with the
manufacturers of vehicles using liquefied petroleum gas (such as propane or
butane) to determine if this device can be safely used in their vicinity.
■ Emergency calls
Important: Wireless phones, including this device, operate using radio
signals, wireless networks, landline networks, and user-programmed
functions. Because of this, connections in all conditions cannot be
guaranteed. You should never rely solely on any wireless device for
essential communications like medical emergencies.
To make an emergency call:
1. If the device is not on, switch it on. Check for adequate signal strength.
84
A d d i t i o n a l s a f e t y i n f o r m a t i o n
Some networks may require that a valid SIM card is properly inserted in the
device.
2. Press the end key as many times as needed to clear the display and ready the
device for calls.
3. Enter the official emergency number for your present location. Emergency
numbers vary by location.
4. Press the call key.
If certain features are in use, you may first need to turn those features off before
you can make an emergency call. If the device is in the offline or flight mode, you
must change the profile to activate the phone function before you can make an
emergency call. Consult this guide or your service provider for more information.
When making an emergency call, give all the necessary information as accurately
as possible. Your wireless device may be the only means of communication at the
scene of an accident. Do not end the call until given permission to do so.
■ Certification information (SAR)
This mobile device meets guidelines for exposure to radio waves
Your mobile device is a radio transmitter and receiver. It is designed not to
exceed the limits for exposure to radio waves recommended by international
guidelines. These guidelines were developed by the independent scientific
organization ICNIRP and include safety margins designed to assure the
protection of all persons, regardless of age and health.
The exposure guidelines for mobile devices employ a unit of measurement known
as the Specific Absorption Rate or SAR. The SAR limit stated in the ICNIRP
guidelines is 2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue. Tests
for SAR are conducted using standard operating positions with the device
transmitting at its highest certified power level in all tested frequency bands. The
actual SAR level of an operating device can be below the maximum value
because the device is designed to use only the power required to reach the
network. That amount changes depending on a number of factors such as how
close you are to a network base station. The highest SAR value under the ICNIRP
guidelines for use of the device at the ear is 0.88 W/kg.
Use of device accessories and enhancements may result in different SAR values.
SAR values may vary depending on national reporting and testing requirements
and the network band. Additional SAR information may be provided under
85
Index
setting service 10
settings 17
A
access codes 9
accessories. See enhancements.
active standby 21, 45
active standby key 47
alarm clock 66
contact information 11
customer service 11
analog clock Mini display 20
antenna 18
applications 69
audio messages 31
data
B
barring password 10
battery
display 20
authentication 80
charging 16
charging, discharging 79
installation 12
blacklist 34
Bluetooth 47, 78
bookmarks 73
browser 72, 73, 74
business cards 42
E
EGPRS 49
end
C
call 23
cache memory 76
calculator 68
calendar 66, 67
call
enhancements 9, 53
equaliser 65
explosive environments 84
functions 23
log 44
F
options 25
factory settings 55
flash messages 30
fold animation 45
font size 45
settings 51
waiting 25
call register. See call log.
calls 23, 24
camera
G
effects 62
gallery 55
games 69
GPRS 49
filter 62
settings 62
take an image 62
certificates 76
character case 25
charge the battery 16
clock settings 46
codes 9
H
handsfree. See loudspeaker.
hearing aid 83
86
I
image 62
navigation key 47
network
IMAP4 32
indicators 21
info messages 38
installation
name on display 20
services 8
battery 12
Nokia contact information 11
notes 67
SIM card 12
instant messaging 34
internet 72
numbers 43
J
O
junk folder 34
offline mode 23
organiser 66
K
P
keyguard 23
keypad lock 23
keys 23
pacemakers 83
parts 19
PC connectivity 77
L
language settings 52
lights 53
log 44
loudspeaker 25
M
PictBridge 51
PIN codes 9, 17
plug and play service 17
POP3 32
main display 20, 45
maintenance 80
memory card 15
memory full 31
menu 27
predictive text input 26
presenter 70
message centre number 28
message folder 31
message settings 38, 39, 40
messages
profiles 44
PTT 56
PUK codes 9
audio message 31
delete 38
Push to talk. See PTT.
pushed messages 75
flash message 30
info messages 38
length indicator 28
message settings 38
service commands 38
text 28
R
recorder 65
ringing tones 45
voice message 37
mini display 20, 46
MMS. See multimedia messages.
multimedia messages 29
music player 63
S
safety information 6, 82
SAR 85
scrolling 27
security
settings 64
87
codes 9
SMS. See text messages
spam filter 34
status indicators 20
stopwatch 68
switch on and off 17
module 76
settings 54
service
commands 38
inbox 75
messages 75
numbers 43
services 72
settings
active standby 45
call 51
T
camera 62
themes 45
clock 46
configuration 53
connectivity 47
data transfer 50
date 46
time settings 46
to-do list 67
downloads 75
enhancements 53
fold animation 45
GPRS, EGPRS 49
main display 45
messages 38
mini display 46
music player 64
my shortcuts 46
phone 52
tones 45
traditional text input 27
U
unlock keypad 23
UPIN 17
V
profiles 44
PTT 60
vehicles 83
voice
PTT configuration 61
restore factory settings 55
security 54
commands 47
dialling 24
messages 37
recorder 65
service inbox 75
themes 45
time 46
tones 45
W
USB data cable 51
wallpaper 45
wallpaper 45
Web 72
shortcuts 46
wireless markup language 72
write text 25
signal strength 20
SIM
card 23
X
card installation 12
messages 38
services 71
XHTML 72
88
|