Screen images are simulated.
Nokia 6256i User Guide
1
Copyright © 2005 Nokia
Part No. 9239174, Issue No. 1
Copyright ©2005 Nokia. All rights reserved.
Nokia, Nokia Connecting People, Nokia 6256i, Pop-Port, and the Nokia Original Enhancements
logos are trademarks or registered trademarks of Nokia Corporation. Other company and
product names mentioned herein may be trademarks or trade names of their respective owners.
US Patent No 5818437 and other pending patents. T9 text input software Copyright ©1999-2005.
Tegic Communications, Inc. All rights reserved.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Includes RSA BSAFE cryptographic or security protocol software from
RSA Security.
Java is a trademark of Sun Microsystems, Inc.
The information contained in this user guide was written for the Nokia 6256i products. Nokia
operates a policy of ongoing development. Nokia reserves the right to make changes to any
of the products described in this document without prior notice.
UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR
INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES
HOWSOEVER CAUSED.
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED “AS IS.” EXCEPT AS REQUIRED BY
APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY AND RELIABILITY OR
CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR
WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.
Export Controls
This device may contain commodities, technology or software subject to export laws and
regulations from the US and other countries. Diversion contrary to law is prohibited.
FCC/Industry Canada Notice
Your phone may cause TV or radio interference (for example, when using a telephone in close
proximity to receiving equipment). The FCC or Industry Canada can require you to stop using
your telephone if such interference cannot be eliminated. If you require assistance, contact
your local service facility. This device complies with part 15 of the FCC rules. Operation is
subject to the condition that this device does not cause harmful interference.
2
Copyright © 2005 Nokia
Contents
For your safety .................................................................................... 4
Welcome............................................................................................... 6
3. Text entry.................................................................................... 22
10. Settings (Menu 7) ...................................................................... 60
11. Organizer (Menu 8).................................................................... 79
12. Mobile Web (Menu 9)................................................................ 89
13. Connectivity (Menu 10)............................................................. 92
14. Get it now (Menu 11) ............................................................... 96
15. Extras (Menu 12) ....................................................................... 98
16. Enhancements............................................................................. 99
17. Reference information............................................................. 100
Care and maintenance.................................................................... 101
Additional safety information ....................................................... 102
Index..................................................................................................120
3
Copyright © 2005 Nokia
For your safety
Read these simple guidelines. Not following them may be dangerous or illegal.
Read the complete user guide for further information.
SWITCH ON SAFELY
Do not switch the phone on when wireless phone use is prohibited or
when it may cause interference or danger.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands free to operate the
vehicle while driving. Your first consideration while driving should
be road safety.
INTERFERENCE
All wireless phones may be susceptible to interference, which could
affect performance.
SWITCH OFF IN HOSPITALS
Follow any restrictions. Switch the phone off near medical equipment.
SWITCH OFF IN AIRCRAFT
Follow any restrictions. Wireless devices can cause interference
in aircraft.
SWITCH OFF WHEN REFUELING
Don't use the phone at a refuelling point. Don't use near fuel
or chemicals.
SWITCH OFF NEAR BLASTING
Follow any restrictions. Don’t use the phone where blasting is
in progress.
USE SENSIBLY
Use only in the normal position as explained in the product
documentation. Don't touch the antenna unnecessarily.
QUALIFIED SERVICE
Only qualified personnel may install or repair this product.
ENHANCEMENTS AND BATTERIES
Use only approved enhancements and batteries. Do not connect
incompatible products.
4
Copyright © 2005 Nokia
For your safety
WATER-RESISTANCE
Your phone is not water-resistant. Keep it dry.
BACKUP COPIES
Remember to make back-up copies or keep a written record of all
important information stored in your phone.
CONNECTING TO OTHER DEVICES
When connecting to any other device, read its user guide for detailed
safety instructions. Do not connect incompatible products.
EMERGENCY CALLS
Ensure the phone is switched on and in service. Press the End key as
many times as needed to clear the display and return to the main
screen. Enter the emergency number, then press the Send key. Give
your location. Do not end the call until given permission to do so.
5
Copyright © 2005 Nokia
Welcome
Congratulations on your purchase of the Nokia 6256i mobile phone. Your phone
provides many functions which are practical for daily use, such as a hands-free
loudspeaker, alarm clock, calculator, calendar, and more. Your phone can also
connect to a PC, laptop, or other device using a data cable, Bluetooth, or infrared.
To personalize your phone, you can set your favorite ring tones.
■ About your device
The Nokia 6256i wireless phone described in this guide is approved for use on the
CDMA 800, 1900, and AMPS networks.
Contact your service provider for more information about networks.
When using the features in this device, obey all laws and respect privacy and
legitimate rights of others.
Warning: To use any features in this device, other than the alarm clock,
the phone must be switched on. Do not switch the device on when
wireless phone use may cause interference or danger.
■ Network Services
To use the phone you must have service from a wireless service provider. Many of
the features in this device depend on features in the wireless network to function.
These Network Services may not be available on all networks or you may have to
make specific arrangements with your service provider before you can utilize
Network Services. Your service provider may need to give you additional
instructions for their use and explain what charges will apply. Some networks
may have limitations that affect how you can use network services. For instance,
some networks may not support all language-dependent characters and services.
Your service provider may have requested that certain features be disabled or
not activated in your device. If so, they will not appear in your device menu.
Contact your service provider for more information.
6
Copyright © 2005 Nokia
Welcome
■ Shared memory
The following features in this device may share memory: contacts, TXT Messages,
photos, images, and tones in gallery, calendar notes, games, and applications.
Use of one or more of these features may reduce the memory available for the
remaining features sharing memory. Your phone may display a message that the
memory is full when you try to use a shared memory feature. In this case, delete
some of the information or entries stored in the shared memory features before
continuing. Some of the features, such as photos, images, tones in gallery, TXT
Messages, and applications may have a certain memory specially allotted to
them in addition to the memory shared with other features.
■ Register your phone
1-888-NOKIA-2U (1-888-665-4228) so that we can serve your needs better if
you should need to call a customer center or to have your phone repaired.
■ PC Suite
Nokia PC Suite software is available for the Nokia 6256i phone. Nokia PC Suite is
a collection of powerful tools that you can use to manage your phone features
and data. Each component is a separate program than includes online helps.
Nokia PC Suite software, installation instructions, and other documentation is
■ Getting help
Find your phone label
If you need help, Nokia Customer Care is
available for assistance. Before calling,
we recommend that you write down
the following information and have
it available:
•
•
Electronic serial number (ESN)
Your zip code
The ESN is found on the type label, which is located beneath the battery on the
back of the phone. See "Remove the back cover," p. 15 and "Remove the battery,"
p. 15 for more information.
7
Copyright © 2005 Nokia
Contact Nokia
Please have your product with you when contacting either of theses numbers:
Nokia Customer Care Center, USA
Nokia Inc.
4630 Woodland Corporate Blvd.
Suite #160
Tampa, Florida 33614
Tel: 1-888-NOKIA-2U
(1-888-665-4228)
Fax: 1-813-249-9619
Web site: www.nokiausa.com/support
In Canada call:
Tel:1-888-22-NOKIA
(1-888-226-6542)
Web site: www.nokia.ca
For TTY/TDD users only:
1-800-24-NOKIA (1-800-246-6542)
Updates
From time to time, Nokia updates this guide to reflect changes. The latest version
Accessibility solutions
Nokia is committed to making mobile phones easy to use for all individuals,
including those with disabilities. For more information visit the Web site at
8
Copyright © 2005 Nokia
Phone at a glance
1. Phone at a glance
■ Keys and parts
1
2
3
4
5
6
Volume key
Front display/viewfinder
Infrared
Voice/shutter key
Flash
Camera lens
Voice/shutter key
•
•
Short press—Starts and stops voice memo recorder.
Long press—Answer or make a call using the loudspeaker when the fold
is closed.
•
Capture a picture when the camera is active.
9
Copyright © 2005 Nokia
■ The standby mode
The standby mode is home base and indicates your
phone is ready for use.
Signal strength (1)—A higher bar indicates a
stronger network signal.
Menu (2)—Press the Center soft key to select
this option.
Go to (3)—Press the Left soft key to select this option.
Names (4)—Press the Right soft key to select this option.
Battery level (5)—A higher bar indicates more power in the battery.
■ Quick keys
In the standby mode, the Four-way scroll key instantly takes you to
frequently-accessed menus:
Scroll up key—Launch the web browser.
Scroll right key—Go to Get it Now.
Scroll down key—View the calendar.
Scroll left key—Quickly create Multimedia message or TXT Message.
Center soft key—Selects highlighted menus and submenus.
Camera key—Quickly activates the viewfinder.
10
Copyright © 2005 Nokia
Phone at a glance
■ Indicators and icons
number of your phone, some or all of the following indicators and icons
may appear in the standby mode.
p. 25.
You have new voice messages. See "Voice messages," p. 34.
Your phone keypad is locked. See "Keyguard," p. 20.
Your phone is set to the silent profile. See "Profiles," p. 60.
The alarm clock is set to on. See "Alarm clock," p. 79.
The countdown timer is running. See "Countdown timer," p. 86.
The stopwatch timer is running in the background. See
"Stopwatch," p. 86.
Integrated hands-free is active. See "Using the loudspeaker," p. 20.
The timed profile is selected. See "Profiles," p. 60.
An enhancement is connected to the phone. See "Enhancement
settings," p. 71.
or
or
Voice privacy encryption is active (or is not active) in the network.
or
Location info sharing is set to Emergencyor On. See "Enhancement
settings," p. 71.
You are in a digital network. See "Network Services," p. 6.
You are in an analog network. See "Network Services," p. 6.
You are in a 1XRTT network. See "Network Services," p. 6.
You are roaming outside your home network. See "Roaming
options," p. 75.
11
Copyright © 2005 Nokia
■ Get the most out of this guide
The following sections illustrate the various components of your phone.
Familiarize yourself with these sections to help you understand the instructions
that follow.
This guide uses certain terms for the steps that you are asked to perform.
•
Press means to press and release a key quickly (short press). For example,
Press 7 means press the key on the keypad that is labeled with the number 7
and the letters “pqrs”.
•
•
Press and hold means to press and hold a key for 2–3 seconds; then release
the key (long press).
Soft keys are used to select a menu option. To select an option, press the soft
key below the menu item on the phone screen.
•
•
Scroll keys are used to move up, down, left, or right in the menus.
Call and End keys: Press the Send key to place a call or to answer an
incoming call. Press the End key to end a call or press and hold to return
to the idle screen.
■ Phone menus
Phone features are grouped according to function and are accessed through the
main menus. Each main menu contains submenus and lists from which you can
select or view items and customize your phone features. You can access these
menus and submenus by using the scroll method or by using a shortcut.
Note: Some features may not be available, depending on your network.
For more information, contact your wireless provider.
The scroll method
1. In the standby mode, select Menu and scroll through the
main menus using the up and down Four-way scroll key.
While scrolling through the menu, a beep is heard when you
return to the beginning submenu.
As you scroll through the menus, the menu number appears in the upper right
corner of the display. Below the number is a scroll bar with a tab that moves
up or down on the right side of the display screen as you scroll through the
menus, providing a visual representation of your current position in the
menu structure.
12
Copyright © 2005 Nokia
Phone at a glance
2. When you arrive at a menu, press Select (the Center soft key) to enter submenus.
•
•
Press Back (the Right soft key) to return to the previous menu.
Press the End key to return to the standby mode from any menu or submenu.
In-phone help
Many features have brief descriptions (help text) which can be viewed on the
display. To view these descriptions, scroll to a feature and wait for about 10 seconds.
Use the Scroll down key to view all of the description, or press Back to exit.
In order to view the descriptions, you must first activate help text.
In the standby mode, select Menu > Settings > Phone settings > Help text
activation > On or Off.
■ ’Go to’ functions
The Go to menu allows you to change the function of the Left soft key on your
phone so that your most frequently used functions can be quickly accessed from
the Go to menu in the standby mode.
Choose ’Go to’ functions
1. In the standby mode, select Go to > Options > Select options.
2. Use the Scroll up key and the Scroll down key to highlight the desired
functions from the list of available functions.
3. Press Mark to add a function. Use Unmark to remove a function.
4. Select Done when you have added all desired functions.
5. Select Yes to save the changes.
6. In the standby mode, press Menu > Go to to display a list of the functions that
you selected in step 3.
Organize functions
1. In the standby mode, select Go to > Options > Organize.
2. Use the Scroll up key or the Scroll down key to highlight the function you
wish to rearrange, and select Move.
3. Select Move up, Move down, Move to top, or Move to bottom.
4. Press Done > Yes to save the changes.
13
Copyright © 2005 Nokia
2. Set up your phone
■ Antenna
Your device has a fixed and extendable antenna located
towards the top of the phone when the fold is closed. Hold
antenna area pointed up and over your shoulder.
The fixed antenna is active unless the extendable antenna is
fully extended.
Note: Parts of the device are magnetic. Metallic
materials may be attracted to the device, and persons
with a hearing aid should not hold the device to the
ear with the hearing aid. Always secure the device in
its holder, because metallic materials may be attracted by the earpiece.
Do not place credit cards or other magnetic storage media near the
device, because information stored on them may be erased.
In the Nokia 6256i phone, the GPS antenna is also
internal and is activated when placing emergency calls
or when On is selected from the Location info sharing
menu. For more information, see "Location info sharing,"
p. 64.
Note: As with any other radio transmitting
device, do not touch the antenna
unnecessarily when the device is switched
on. Contact with the antenna affects call
quality and may cause the phone to operate
at a higher power level than otherwise
needed. Not touching the antenna area
during a phone call optimizes the
antenna performance and the talktime
of your device.
14
Copyright © 2005 Nokia
Set up your phone
■ Battery
Note: Before removing the cover, always switch off the power and
disconnect the charger and any other device.
Avoid touching electronic components while changing the covers. Always store
and use the device with the covers attached.
Remove the back cover
1. With the back of the phone facing you,
push down on the back cover.
2. Slide the back cover toward the bottom of
the phone and remove.
Remove the battery
After you have removed the back cover, insert
your finger into the finger grip, and lift the
battery from its compartment.
UIM (CDMA SIM) card slot
Your phone has a UIM card slot built into the mechanics. However, the UIM is not
functional in this phone model. Avoid placing anything into the UIM card slot.
Install the MMC card
Before installing the MMC card, always
make sure that the phone is switched
off and that you have removed the cover
and battery.
Open the MMC holder by lifting the
latch (1) and lifting the holder up (2).
15
Copyright © 2005 Nokia
Insert the MMC card into the holder
with the gold-colored contacts
facing down, matching up with the
gold-colored contacts on the phone.
The beveled corner of the card fits
into the beveled corner of the slot.
Close the UIM/MMC holder and
replace the battery.
Note: The MMC card is
not included in the sales
package. You canpurchase
MMC cards for your phone
Replace the battery
1. Insert the battery, gold-colored
contact end first, into the
battery slot.
2. Push down on the other end of
the battery to snap the battery
into place.
Replace the back cover
Set the back cover on the phone
with the cover tabs aligned with
the slots in the phone.
Slide the back cover toward the top
of the phone until the back cover is
securely in place.
16
Copyright © 2005 Nokia
Set up your phone
Charge the battery
1. Plug the charger transformer into a standard ac outlet.
2. Insert the charger output plug
into the round jack at the
bottom end of the phone.
After a few seconds, the battery
indicator in the display starts to
scroll from bottom to top. If the
battery is completely
discharged, it may take a few
minutes before the charging
indicator appears on the display
or before any calls can be made.
■ Turn your phone on or off
1. To turn your phone on or off, press and hold
the Power key on top of the phone for at
least 3 seconds.
2. Enter the security code, lock code, or PIN
code, if necessary, and press OK.
■ Connect the headset
A compatible headset may be purchased with your phone or separately as an
enhancement. See "Enhancement settings," p. 71 for information.
1. Plug the headset connector into the
universal jack at the top end of your phone.
The
icon appears in the standby mode.
2. Position the headset on your ear.
With the headset connected, you can make,
answer, and end calls as usual.
•
•
•
Use the keypad to enter numbers.
Press the Send key to place a call.
Press the End key to end a call.
17
Copyright © 2005 Nokia
You can also use a compatible headset to allow hands-free operation of your
phone. See "Enhancement settings," p. 71.
■ Make a call
Note: Before making or receiving a call, fully extend the whip antenna.
Using the keypad
1. Enter the phone number (including the area code), and press the Send key.
(To delete a character to the left of the cursor, press Clear.)
2. Press the End key or to end the call or End call to cancel the call attempt.
Using the contacts list
To begin entering names in your contacts list, key in a number in the standby
mode and press Save. Enter a contact name and press OK.
Once you have entries in the contacts list, in the standby mode select Names >
Search and use the Scroll up and Scroll down keys to find a contact. Press the
Send key to make the call, or press Details to view details of the entry.
Using the last dialed number
In the standby mode, press the Send key to display the last 30 numbers dialed.
Scroll to the number (or name) you wish to redial, and press the Send key.
Conference calling
Conference calling is a network service that allows you to take part in a
conference call with two other participants.
1. Make a call to the first participant.
2. With the first participant on the line, select Options > New call.
3. Enter the phone number of the second participant, or press Search to retrieve
a number from the contacts list. Press OK > Call. The first participant is put
on hold.
4. When the second participant picks up, press the Send key to connect the calls.
5. To end the conference call, press Options > End all calls or press the End key.
18
Copyright © 2005 Nokia
Set up your phone
■ Answer calls
Answer or silence an incoming call
1. Press the Send key or Answer to answer the call.
2. With the fold open:
Press the End key to reject the call.
Press Silence to mute the ringing tone, then press Dismiss, or do nothing, and
the call is eventually forwarded to voicemail.
If your phone is set to Silent in the Profiles menu, press Dismiss, and the call is
forwarded to voicemail.
3. With the fold closed:
Press the Volume key to mute the ringing tone.
A long press of the Voice/shutter key answers an incoming call with
the loudspeaker.
Your phone answers an incoming call when you open the fold. This is the default
setting, but you can change the setting so that the phone will not answer calls
when the fold is opened.
is opened > On or Off.
Adjust the earpiece volume
Press the Up arrow or Down arrow on the volume key located on the left side of
your phone to adjust the volume of the earpiece.
When adjusting the volume, a bar chart appears in the display indicating the
volume level.
Answer a call with the keypad locked
To answer a call with the keypad locked, simply press the Send key with fold open.
To answer a call with the fold closed and with the keypad locked, press and hold
the Voice/shutter key to answer with the loudspeaker. During the call, all features
function as normal. When you end or reject the call, the keypad automatically
re-locks. See "Keyguard," p. 20 for details.
When the keypad lock is on, calls still may be possible to the official emergency
number programmed into your device.
Key in the emergency number and press the Send key.
19
Copyright © 2005 Nokia
Using the loudspeaker
Warning: Do not hold the device near your ear when the loudspeaker is
in use, because the volume may be extremely loud.
You can use your phone as a loudspeaker during a call. While in a call:
•
•
To activate the loudspeaker while in a call with the fold open, press Loudsp..
To activate the loudspeaker when answering a call with the fold closed, press
and hold the Voice/shutter key.
•
To deactivate the loudspeaker during a call, press Normal.
The loudspeaker is deactivated automatically when a call (or a call attempt) ends
or when certain enhancements are connected.
Options during a call
Many of the options that you can use during a call, are network services.
Check with your wireless service provider for more information.
1. Press Options during a call to display the following options:
Loudspeaker/Handset—Activate or deactivate the loudspeaker while in a call.
New call—Initiate a conference call. See "Conference calling," p. 18
for information.
Save—Save a number entered during a call.
Add to contact—Add a number entered during a call to a contact in your list.
End all calls—Disconnect from all active calls.
Touch tones—Enter the number(s), and press Tones to send the number(s)
as tones.
Contacts—View the contacts list.
Menu—View the phone menu.
2. Scroll to an option, and press Select to activate the option or enter its submenu.
■ Keyguard
With keyguard, you can lock the keypad to prevent keys from being pressed
accidentally. If the keypad is locked, it unlocks when you receive a call. After the
call, the lock automatically reactivates.
When the keyguard is on, calls still may be possible to the official emergency
number programmed into your phone. Key in the emergency number, and press
the Send key.
20
Copyright © 2005 Nokia
Set up your phone
Lock the keypad
Select Menu with the Center soft key; then press the * key within two seconds.
Unlock the keypad
Select Unlock with the Center soft key; then press the * key within two seconds.
21
Copyright © 2005 Nokia
3. Text entry
You can use two methods for entering text and numbers:
•
Standard mode is the only way to enter text into the contacts list and
to rename caller groups. Press the # key to switch between uppercase
and lowercase.
•
Predictive text input is a quick and easy method for writing messages or
creating a calendar note.
■ Standard mode
Text (Abc)
•
Press a key once to insert the first letter on the key, twice for the second
letter, etc. If you pause briefly, the last letter in the display is accepted and
your phone awaits the next entry.
•
•
•
•
Press Clear to backspace the cursor and delete a character.
Press and hold Clear to backspace continuously and delete characters.
Press the 0 key to enter a space, thereby accepting a completed word.
Press the 1 key as many times as necessary to scroll through a list of
commonly used characters.
•
•
Press the * key to display a complete list of special characters.
Press and hold the # key to bring up the Editor settings (Number mode,
Predictive text on/Predictive text off, Writing language).
•
Press the # key to switch between uppercase, lowercase, and sentence case
text. As you press the # key, the following icons (not the descriptions) appear
in the upper left of the display screen:
Uppercase text: standard mode is on
Lowercase text: standard mode is on
Sentence case text: standard mode is on
22
Copyright © 2005 Nokia
Text entry
Numbers (123)
To switch to 123 mode from Abc mode, press and hold the # key at any message
entry screen to bring up the Editor settings menu list of Number mode, Predictive
text, and Writing language. Select Number mode, and the phone will return to
the message entry screen and switch the ABC icon in the upper left corner of the
display to the 123 icon.
Punctuation and special characters
While at any text entry screen, press the * key to display special characters (press
and hold the * key if predictive text is on). Press the * key again to cycle through
all available characters. You can navigate through the list of special characters
by using the Four-way scroll key. Once a character is highlighted, pressInsert to
insert the character into your message.
■ Predictive text input
Predictive text input allows you to write messages quickly using your keypad and
the built-in dictionary. It is much faster than the standard mode method, because
for each letter, you only press the corresponding key on your keypad once.
When you use Predictive text , as you press the # key, the following icons (not the
descriptions) appear in the upper left of the display screen:
Sentence case text: predictive text is on
Lowercase text: predictive text is on
Activate/deactivate
There are several ways to activate/deactivate predictive text.
At any text entry screen, press and hold Options. Predictive text is turned on and
off, depending on its previous mode.
From any text entry screen, press the # key to turn predictive text on and off, and
to change the case text.
At any text entry screen, select Options > Predictive text or Prediction off.
23
Copyright © 2005 Nokia
Text entry
The illustration below simulates your display each time a key is pressed. For
example, to write Nokia with predictive text on and with the English dictionary
selected, press each of the following keys once:
6
6
5
4
2
•
•
Press the 0 key to enter a space, and begin writing the next word.
If a displayed word is not correct, press the * key to see other matches. To
return to the previous word in the list of matches, press Previous.
•
•
•
If ? appears after a word, press Spell to add the word to the dictionary.
Press the 1 key to insert a period into your message.
Press and hold the * key to display special characters. Press the * key again to
cycle through all available characters.
24
Copyright © 2005 Nokia
Messages (Menu 1)
4. Messages (Menu 1)
If you have subscribed to a message network service, you can send and receive
messages to compatible phones that are also subscribed to a message service.
You can also send and receive picture messages, multimedia messages, and
e-mail if supported by your service provider. Also, you can make distribution lists
that contain phone numbers and names from your contact list. See "Distribution
lists," p. 34 for more information.
When composing TXT Messages, picture messages, or multimedia messages,
check the number of characters allowed in the top right corner of the message.
Using special (Unicode) characters takes up more space. If there are special
characters in your message, the indicator may not show the message length
correctly. Before the message is sent, the phone will tell you if the message
exceeds the maximum length allowed for one message.
Note: When sending messages, your device may display Message sent.
This is an indication that the message has been sent by your device to the
message center number programmed into your device. This is not an
indication that the message has been received at the intended destination.
For more details about messaging services, check with your service provider.
Important: E-mail messages or multimedia message objects may
contain viruses or otherwise be harmful to your device or PC. Do not open
any attachment if you are not sure of the trustworthiness of the sender.
■ TXT Messages
Write and send
1. In the standby mode, select Menu > Messages > Text messages >
Create message.
2. Compose or reply to a message using the keypad, and select Send.
For other options while composing the message, select Options and one of
the following:
Sending options—Mark/Unmark options Urgent, Delivery note, and Signature.
Clear text—Erase the text from the message editor.
Add-ins—Add sound, animation, or pictures to a TXT Message.
25
Copyright © 2005 Nokia
Styles—Select the style of font type, font size, and text alignment in a
TXT Message.
Insert contact—Insert a name from your contacts list into your message.
Insert number—Insert a phone number or find a phone number in the
contacts list.
Save message—Select Drafts to save the message in the Drafts folder; select
Templates to save the message as one of your predefined templates in the
Templates folder.
Exit editor—Exits the message editor.
Use template—Insert a predefined template into your message.
Insert word—Enter a word and insert it into your message. This option is
available if predictive text is on.
Insert symbol—Insert a special character into your message. This option is
available if predictive text is on.
Predictive text—Turn predictive text on or off.
3. To send the message, select Send to > Send to number, Send to e-mail, Send
to many, or Send to distrib. list. Enter the recipient’s phone number or e-mail
address or select Search to retrieve a number or e-mail address from Contacts,
and select Send.
Templates
Templates are short, prewritten messages that can be recalled and inserted into
new TXT Messages when you are short on time.
1. In the standby mode, select Menu > Messages > Text messages >
Create message.
2. Select Options > Use template.
3. Scroll to one of the available templates, and press Select.
4. Select Send to > Send to number, Send to e-mail, Send to many, or Send to
distrib. list (only when a distribution list has been created) and press Select.
5. Enter the recipient’s phone number or e-mail address, or select Search to
retrieve a number or e-mail address from your contacts list, and select Send.
A distribution list only contains phone numbers of recipients, and is selected
from a list of predefined groups you created.
26
Copyright © 2005 Nokia
Messages (Menu 1)
Read and reply
When you receive a message, a notification message and the unopened letter
icon ( ) appear in the display.
1. Press Show to read the message, or Exit to dismiss the notification and read
the message later.
When you have unopened messages in your inbox,
is shown in the upper
left corner of the screen in the standby mode as a reminder.
Use the Scroll down key to view the whole message if necessary.
2. Select Reply > Empty screen, Original text, Template, or one of the predefined
answers, then compose your reply using the keypad.
3. Press Send.
Options
When you read a TXT Message, some or all of the following options are available:
Delete—Discard the message.
Message details—View the time, date, and phone number of the sender.
Use number—Choose Add to contact, Send message, or Call.
Save—Save the message to Sent items, Archive, Templates, or a folder you
have created.
Forward—Forward the message to another phone number or e-mail address.
Rename—Edit the title of the message.
Save address—Save an e-mail address in a TXT Message.
Use web link—Display web links in a TXT Message and connects to the link with
the browser.
Change sending options
1. In the standby mode, select Menu > Messages > Text messages > Message
settings > Sending options to change sending options for all TXT Messages.
2. To change sending options for one message, in the standby mode, select
Menu > Messages > Text messages > Create message > Options >
Sending options.
3. Select the setting you wish to change:
Priority—Set the priority of the note as Normal or Urgent.
27
Copyright © 2005 Nokia
Delivery note—A note is sent to you confirming delivery of the message.
Select On or Off.
Send callback number—A callback number is sent to the recipient. Select Off
or your phone number.
Signature:—Write a Signature to send with TXT Messages, or select Off.
Change message settings
1. In the standby mode, select Menu > Messages > Text messages > Message
settings > Other settings.
2. Select the setting you wish to change:
Message overwriting—Select Sent items only, Inbox only, S. items & Inbox,
or Off.
Note: When the message memory is full, your phone cannot send or
receive any new messages. However, you can set your phone to
automatically replace old messages in the Inbox and Outbox folders
when new ones arrive.
Save sent messages—Select Always save, Always prompt, or Off.
Auto-playback of sounds—Select On or Off to have a sound in a message
automatically played when highlighted.
Queue msgs.when digital unavailable—Select On, On prompt, or Off.
Messages are stored in the Outbox until they can be sent with digital service.
■ Enhanced messages
Enhanced messaging is a network service. If your wireless service provider supports
this feature, enhanced messaging functions in the same manner as text messaging,
but it offers additional options for the style and content of the message.
Enhanced messages behave the same as TXT Messages, but attachments take up
more space than text. For more details about services and pricing, check with
your service provider.
In the standby mode, select Menu > Messages > Text messages > Create message >
Options > Add-ins or Styles.
When creating an enhanced message, the following options are available:
Add-ins—Select Sound, Animation, or Picture to add to the message.
Styles—Select the Font type, Font size, or Text alignment of the message.
28
Copyright © 2005 Nokia
Messages (Menu 1)
Note: If you try to send an enhanced message to a phone that does not
support enhanced messaging, the enhanced messaging content will be
stripped from the message, leaving only the text you have entered.
While viewing a received enhanced message, the following options are available:
Sound—Select Play sound or Save sound.
Animation—Select Save animation.
Picture—Select Save picture.
Note: Enhanced messaging is a network service. For availability and
subscription, contact your service provider. Only compatible devices
subscribing to the service can receive and display enhanced messages.
■ Pix Place multimedia messages
A multimedia message can contain text, sound, and a picture, or a multimedia
message can contain a video clip. Your phone supports multimedia messages that
are up to 300 KB. If the maximum size is exceeded, the phone may not be able to
receive the message. Pictures are scaled to fit the display area of the phone. Your
phone has a multimedia message viewer for playing messages and a multimedia
folder for storing saved messages. Once you save the multimedia message, you
can use the image as a screen saver or the sound as a ringing tone.
Important: Multimedia message objects may contain viruses or
otherwise be harmful to your device or PC. Do not open any attachment
if you are not sure of the trustworthiness of the sender.
Copyright protections may prevent some images, ring tones, and other content
from being copied, modified, transferred, or forwarded.
Note: Multimedia messaging can be used only if it is supported by your
service provider or network operator. For availability and a subscription
to the multimedia messaging service, contact your service provider or
network operator. Only compatible devices can receive and display
multimedia messages.
Multimedia messaging supports the following formats:
•
•
•
Picture: JPEG, GIF, animated GIF, WBMP, BMP, and PNG
Sound: SP-MIDI, AMR audio, QCELP, and monophonic ring tones
Video: clips in H.263 format with SubQCIF image size and AMR audio
Note: If a received message contains unsupported elements, these
elements may be replaced with the text Object format not supported.
29
Copyright © 2005 Nokia
You cannot retrieve multimedia messages if you have a call in progress, games or
other applications running, or an active browsing session. Because delivery of
multimedia messages can fail for a variety of reasons, do not rely solely upon
them for essential communications.
Multimedia message settings
Before you can use the multimedia message feature, you must specify whether
you want to receive multimedia messages at all times or only if you are in the
service provider’s home system. This is a network service. Check with your service
provider for more information.
The default setting ofthe multimedia message service is generally on. The appearance
of a multimedia message may vary depending on the receiving device.
Allow or block multimedia reception
You can choose to receive all messages, to block all messages, or to receive
messages only when you are in the service provider’s home network.
1. In the standby mode, select Menu > Messages > Multimedia msgs. > Message
settings > Allow multimedia reception and one of the following:
Yes—Allow all incoming messages.
In home network—Allow incoming messages only if you are in the service
provider’s home system. This is a network service. Check with your service
provider for more information.
No—Block all incoming messages.
2. Select Incoming multi-media messages > Retrieve to automatically retrieve
all messages to your inbox. When new messages arrive, you are notified
Multimedia message received, or Multimedia messages received.
Select Retrieve manually to choose which messages you want to retrieve to
your inbox. When messages are available, you are notified 1 multimedia
message available, or if more messages are available, the notification shows
how many.
Select Reject to automatically reject all multimedia messages received.
3. If you choose to automatically retrieve messages, you can select Show to read
the multimedia message, or Exit to view them in your inbox later.
If you select to manually retrieve messages, select Show to open the message
notification, and then select Retrieve. Or select Exit to save the notification to
your inbox, and retrieve the message later.
30
Copyright © 2005 Nokia
Messages (Menu 1)
4. When you receive an incoming multimedia message, you can also choose Exit
if you do not want to retrieve the message.
Allow or block advertisements
This setting is not available if multimedia reception is blocked.
In the standby mode, select Menu > Messages > Multimedia msgs. > Message
settings > Allow adverts > Yes or No.
This is a network service. Check with your service provider for more information.
Other MMS settings
Other MMS settings include saving your messages to the Sent items folder and
editing your connection settings.
In the standby mode, select Menu > Messages > Multimedia msgs. > Message
settings and one of the following:
Save sent messages—Select Yes to save sent multimedia messages to the Sent
items folder or No to discard.
Delivery reports—Select Yes to be informed if the message was delivered or No to
not be informed.
Default slide timing—Set the default time in mm:ss format for each slide in an
MMS to remain on the screen.
Folders
Your phone has the following folders under Messages > Multimedia msgs.:
Inbox—Contains received multimedia messages.
Outbox—Contains multimedia messages which you have sent and are still
waiting to be transmitted.
Sent items—Contains sent multimedia messages.
Saved items—Contains saved multimedia messages that you can send later.
Delete messages—Delete messages in the Inbox, Outbox, Sent items, or Saved items.
Message settings—Select settings for Save sent messages, Delivery reports,
Default slide timing, Allow multimedia reception, Incoming multi- media
messages, and Allow adverts.
Write and send multimedia messages
1. In the standby mode, select Menu > Messages > Multimedia msgs. >
Create message.
31
Copyright © 2005 Nokia
2. Enter the text of your message, and select Options > Insert > Image, Sound
clip, New sound clip, Video clip, Slide, Business card or Calendar note.
The list of available folders in the Gallery is shown.
3. Open the desired folder, scroll to the image, sound clip, or video clip, and
select Options > Insert.
Copyright protections may prevent some images, ring tones, and other
content from being copied, modified, transferred, or forwarded.
4. To add a new page (also called a slide) to the message, select Options >
Insert > Slide.
Each slide can contain text, one image, a business card, calendar note, and
one sound clip. If the message contains several slides, you can open the
desired slide by selecting Previous slide, Next slide, or Slide list.
5. To set the time interval between the slides, select Options >Slide timing, enter
the time interval, and select OK.
6. To move the text to the top or bottom of the message, select Options >
Place text first or Place text last.
7. To insert a name from contacts, select Options > More options > Insert contact,
scroll to the desired name, and select Select.
8. To insert a number, select Options > More options > Insert number, enter the
number or search for it in contacts, and select OK.
9. To insert a calendar note, select Options > Insert > Calendar note.
10. To insert a business card, select Options > Insert > Business card.
11. To delete an image, slide, video clip, or sound clip from the message, select
Options > Delete > Image, Sound clip, Video clip, or Slide.
12. To add a subject to the message, select Options > More options > Edit subject,
enter a subject, and select OK.
13. To view the message or slide presentation before sending it, select
Options > Preview.
14. To save the message to the Saved items folder, select Options > Save message.
15. To send the message, select Send, or select Options > Send to e-mail, To Pix
Place, Send to many, or Send to distrib. list.
To Pix Place is an online network service. Check with your service provider for
more information.
32
Copyright © 2005 Nokia
Messages (Menu 1)
16. Enter the recipient’s number or search for it in contacts; select Options to
enter the e-mail address; and select OK.
The message is moved to the Outbox folder for sending.
It takes more time to send a multimedia message than to send a TXT Message.
While the multimedia message is being sent, the animated indicator
is displayed
and you can use other functions on the phone. If there is an interruption while
the message is being sent, the phone automatically tries to resend it a few times.
If this fails, the message remains in the Outbox folder and you can try to manually
resend it later. Check your Outbox folder for unsent messages.
Note: When sending messages, your device may display the words
Multimedia message sent. This is an indication that the message has
been sent by your device to the message center number programmed
into your device. This is not an indication that the message has been
received at the intended destination. For more details about messaging
services, check with your service provider.
Messages that you have sent are saved in theSent items folder if the setting
Save sent messages is set to Yes. See "Other MMS settings," p. 31. This is not
an indication that the message has been received at the intended destination.
Read and reply to multimedia messages
When a multimedia message is being received,
display along with the percentage display indicating the sending progress.
Once the message has been fully downloaded, and 1 multimedia message
appears animated in the
available or Multimedia messages available appears in the display.
1. To retrieve and view the message immediately, select Show.
To save the message to the inbox for later viewing, select Exit.
2. To view a saved message, select Messages > Multimedia msgs. > Saved items
and scroll to view the message.
3. While viewing the message, select Play to view the entire MMS, or select
Options and one of the following:
View text—View only the text included in the message.
Open image, Open sound clip, or Open video clip—View or listen to the
corresponding file.
Delete message—Delete the message you are viewing.
33
Copyright © 2005 Nokia
Reply or Reply to all—Enter a reply and send it to the original sender and any
other recipients of the message.
Forward to no., Forward to e-mail, or Forward to many—Forward the message
to a phone number, to an e-mail address, or to multiple recipients.
Message details—View the sender’s name and phone number, the message
center used, reception date and time, message size and type.
Save image, Save sound clip, or Save video clip—Save the corresponding file to
the gallery. Images, sound clips, and video clips must be opened before you
can save them.
If
blinks and Multimedia memory full, view waiting msg. appears in the
display, memory for multimedia messages is full. To view the waiting message,
select Show. Before you can save the message, you need to delete some of your
old messages. See "Delete messages," p. 38 for more information.
■ Distribution lists
You can send a TXT Message or multimedia message to multiple recipients at one
time. First, you must create a distribution list using the entries in your contacts list.
1. In the standby mode, select Menu > Messages > Distribution lists > New list.
2. Enter the name of the list and press OK.
3. With the list highlighted, select Add.
4. Scroll to the contact you want to add to the distribution list and press Select.
5. Highlight the phone number you want to add and press Select.
Repeat steps 3–5 to add additional contacts to the distribution list.
6. To create additional distribution lists, in the standby mode, select Menu >
Messages > Distribution lists > Options > Create new list.
■ Voice messages
If you subscribe to voice mail, your wireless provider will furnish you with a voice
mailbox number. You need to save this number to your phone to use voice mail.
When you receive a voice message, your phone lets you know by beeping, displaying
a message, or both. If you receive more than one message, your phone shows the
number of messages received.
34
Copyright © 2005 Nokia
Messages (Menu 1)
Save voice mailbox number
Your wireless provider may have already saved your voice mailbox number to
your phone. If so, the number will appear in the display in step 1. Press OK to
leave the number unchanged.
1. In the standby mode, select Menu > Messages > Voice messages > Voice
mailbox number.
The Voice mailbox number screen appears in the display.
2. If the box is empty, enter the voice mailbox area code and number, or
enter *86.
3. Press OK.
Call and setup your voice mail
1. Once you have saved the voice mailbox number, press and hold the 1 key.
2. When you connect to voice mail and the prerecorded greeting begins, follow
the service’s automated instructions to setup your voice mail.
Listen to your voice messages
Once you have setup voice mail, you can dial the voice mailbox number in one
of five ways:
•
•
•
•
•
Dial the number using the keypad.
Press and hold the 1 key.
Press the 1 key and the Send key.
Press Listen if there is a notification message in the display.
In the standby mode, select Menu > Messages > Voice messages > Listen to
voice messages.
Once you connect and the prerecorded greeting begins, follow the automated
instructions to listen to your voice messages.
Automate voice mail
You can insert special characters called dialing codes into phone numbers such
as voice mail, and save the number to a 1-touch dialing location. Dialing codes
instruct the receiving system to pause, wait, bypass, or accept the numbers that
follow them in the dialing string.
35
Copyright © 2005 Nokia
Note: Voice mail services vary by service provider. The following
instructions are examples of common operations. Please check with your
service provider for specific instructions for using your voice mail service.
Write down voice mailbox number and process
1. Write down your voice mailbox number.
2. Call and check your voice mail as you normally would.
3. Write down your interaction with the recorded prompts step-by-step. Keep in
mind that each voice mail service may vary. However, it should look something
like this:
Dial 8585551212, pause 5 seconds, press 1, pause 2 seconds, press 1234,
press pound key.
Be precise; you will need this information in "Setup voice mail with 1-touch
dialing codes," p. 36.
Insert dialing codes
Press the * key repeatedly to cycle through dialing codes. Once the desired
code appears in the display, pause briefly and the code is inserted into the
dialing string.
The following dialing codes are available:
*—Bypasses a set of instructions.
p—Pauses for 2.5 seconds before sending any numbers that follow.
w—Waits for you to press the Send key before sending the numbers or codes
that follow.
Setup voice mail with 1-touch dialing codes
1. In the standby mode, select Names > 1-touch dialing.
2. Scroll to an empty 1-touch dialing slot (2-9) and press Assign.
3. Enter your voice mailbox number, including the area code.
4. Refer to dialing codes and enter any codes as necessary using the information
that you wrote down from, "Call and setup your voice mail," p. 35.
For example, if you pause for 5 seconds after connecting to voice mail, enter p
twice after the voice mailbox number, for example, 2145551212pp.
5. Enter any remaining pauses or other information that allows you to listen to
your messages, and press OK.
6. Enter a name (such as Voice Mail), and press OK.
To dial and listen to your voice mail, press and hold the assigned 1-touch dialing
key in the standby mode.
36
Copyright © 2005 Nokia
Messages (Menu 1)
■ Message folders
Save drafts and received messages to folders
You can save drafts of messages or received messages to an existing folder or to a
folder that you have created.
1. Open the received message or create a new message, and press Options.
2. To save a received message, select Save message > Sent items, Archive,
Templates, or a folder you have created on your own.
3. To save a draft of a message you are creating, select Save message > Drafts
or Templates.
View messages
1. In the standby mode, select Menu > Messages > Text messages.
2. Select the folder containing the message you wish to view:
Inbox—Messages are automatically stored in this folder after they have been
read or if you press Back when the message notification appears in the
standby mode.
Outbox—Messages that have not been sent are stored in this folder.
Sent items—Messages that have been sent are automatically stored in
this folder.
Drafts—Messages created, but not sent are automatically stored in this folder.
Archive—Store messages that have been read and that you want to keep in
this folder.
Templates—Pictures and prewritten templates are stored in this folder.
Preloaded templates can be edited and customized.
My folders—Keep your messages organized by creating custom folders and
saving some of your messages here. Select Options > Add folder to add a
custom folder. You can also select Options > Rename folder or Options >
Delete folder to rename or delete a folder you have created.
3. Once the folder opens, scroll to the message you wish to view, and press Select.
37
Copyright © 2005 Nokia
■ Delete messages
If your message memory is full and you have more messages waiting at the
network, No space for new messages appears on the display in the standby mode.
You can do the following:
•
•
Read some of the unread messages, and delete them individually.
Delete messages from some of your folders.
A single message
To delete a single message, you need to open it first.
1. In the standby mode, select Menu > Messages > Text messages.
2. Scroll to the folder containing the message you wish to delete, and press Select.
3. Scroll to the message you wish to delete, and press Select.
4. Select Options > Delete.
5. Press Yes to delete the message or Back to exit.
All messages in a folder
1. In the standby mode, select Menu > Messages > Text messages >
Delete messages.
2. Scroll to the status of the messages you wish to delete, and press Select:
All—Deletes all messages in all of the folders.
All read—Deletes any messages which have been read in all of the folders.
All unread—Deletes any messages which have not been read in all of the folders.
Mark the folders that have messages you want to delete:
Inbox—Deletes all messages from the Inbox folder.
Sent items—Deletes all messages from the Sent items folder.
Outbox—Deletes all messages from the Outbox folder.
Drafts—Deletes all messages from the Drafts folder.
Archive—Deletes all messages from the Archive folder.
User-added folder—Deletes all messages from a folder you created and named.
3. Press Done > Yes to empty the marked folder.
Note: Only folders created in My folders can be deleted. The Inbox,
Sent items, Archive, and Templates folders are protected. When you
delete a folder, all messages in the folder are also deleted.
38
Copyright © 2005 Nokia
Messages (Menu 1)
■ Voice tags
You can dial up to 25 stored numbers using voice dialing.
Before using voice tags, note that:
•
Voice tags are not language dependent. They are dependent on the
speaker’s voice.
•
•
You must say the name exactly as you said it when you recorded it.
Voice tags are sensitive to background noise. Record voice tags and use them
in a quiet environment.
•
Very short names are not accepted. Use long names and avoid similar names
for different numbers.
Note: Using voice tags may be difficult in a noisy environment or
during an emergency, so you should not rely solely upon voice dialing
in all circumstances.
Assign a voice tag to an entry
Before you can use voice dialing, you must first assign a voice tag to the number.
1. In the standby mode, select Names and use the Scroll up key or Scroll down
key to find the contact you want.
2. Highlight the contact you want to assign a voice tag, press Details > Options >
Add voice tag > Start.
3. Speak clearly into the microphone.
Note: Do not press Quit unless you want to cancel the recording.
The phone automatically stops recording and saves and replays the voice tag.
The
icon appears next to commands which have voice tags assigned.
If recording is not successful, your phone displays Voice system error.
Press Options > Add voice tag, and repeat Step 3.
Dial a number
1. Press and hold Names.
2. When you hear several beeps and Please speak now appears, release the key.
39
Copyright © 2005 Nokia
3. Pronounce the voice tag clearly into the microphone.
When the phone finds the voice tag, Found: appears, and the phone automatically
dials the number. If the phone does not locate a number or recognize the
voice tag, No match found appears.
Voice tags
After you have associated a voice tag to a contact, you can choose one of the
following options:
Play back
1. Select Menu > Contacts > Voice tags.
2. Press Select, then scroll to the name with the voice tag you want to hear.
3. Press Select > Playback.
Change
1. Select Menu > Contacts > Voice tags.
2. Press Select, then scroll to the name with the voice tag you want to change.
3. Press Select > Change.
4. Press Start. The phone repeats your voice tag, and Voice tag saved appears.
Delete
1. Select Menu > Contacts > Voice tags.
2. Press Select, then scroll to the name with the voice tag you want to erase.
3. Press Select > Delete > OK.
■ Minibrowser messages
Mobile web messaging is a network service. See "Network Services," p. 6 for
more information.
If your wireless service provider supports this feature, you can use the Mobile
web to check for e-mail messages. In the standby mode, select Menu >
Messages > Minibrowser messages > Connect.
See "Mobile Web (Menu 9)," p. 89 for more information on using the Mobile web
in your phone to access Web pages.
40
Copyright © 2005 Nokia
Call log (Menu 2)
5. Call log (Menu 2)
Call log stores information about the last 30 missed, 30 received,
and 30 dialed calls. It also adds the total duration of all calls. When the number
of calls exceed the maximum, the most recent call replaces the oldest.
Whether viewing missed, received, or dialed calls, the menu options are the same:
Time of call—Display the date and time of the call.
Send message—Send a message to the number.
Use number—Edit the number and associate a name with the number.
Save—Enter a name for the number and save it to your contacts list.
Add to contact—Add a number to a contact saved in your contacts list.
Delete—Clear the number from memory.
Call—Call the number.
■ View missed calls
Note: The missed calls feature does not function when your phone is
switched off.
Missed calls are calls that were never answered.
1. If the message notification display appears in the display, press List.
2. When the phone number appears in the display, press Options.
3. Scroll to an option, and press Select to activate the option.
OR
1. In the standby mode, select Menu > Call log > Missed calls.
2. Scroll to a name or number, and press Options.
3. Scroll to an option, and press Select to view or activate the option.
■ View received calls
Received calls are calls that have been answered.
1. In the standby mode, select Menu > Call log > Received calls.
2. Scroll to a name or number, and press Options.
3. Scroll to an option, and press Select to view or activate the option.
41
Copyright © 2005 Nokia
■ View dialed numbers
Dialed calls are previous numbers you have dialed from your phone:
1. In the standby mode, press the Send key or select Menu > Call log >
Dialed numbers.
2. Scroll to a name or number, and press Options.
3. Scroll to an option, and press Select to view or activate the option.
Call times
You can make or receive calls to or from the same number and view up to five
calls with the time each call occurred. Your phone clock must be set for this
feature to work accurately.
1. In the standby mode, select Menu > Call log > Missed calls, Received calls, or
Dialed numbers > Options > Time of call.
2. While viewing a missed or received call, select Options > Time of call.
3. Press the Scroll down key to view the most recent call times from this
number; press Back to return to the options list.
■ Delete call logs
You can delete any missed, dialed, or received calls from phone memory.
1. In the standby mode, select Menu > Call log > Delete recent call lists.
2. Select the call type you would like to clear (All, Missed, Received or Dialed).
■ View duration of calls
Note: The actual invoice for calls and services from your service provider
may vary, depending on network features, rounding off for billing, taxes
and so forth.
Last call
To view the duration of the last call, in the standby mode, select Menu >
Call log > Call timers > Last call duration.
Dialed calls
To view the duration of all dialed calls, in the standby mode, select Menu > Call
log > Call timers > Dialed calls’ duration. To view the duration of dialed calls placed
while in the home network or while roaming, select Details > Home or Roaming.
42
Copyright © 2005 Nokia
Call log (Menu 2)
Received calls
To view the duration of all received calls, in the standby mode, select Menu > Call
log > Call timers >Received calls' duration for more information. To view the
duration of received calls placed while in the home network or while roaming,
select Details > Home or Roaming.
All calls
In the standby mode, select Menu > Call log > Call timers > All calls’ duration.
Life timer
In the standby mode, select Menu > Call log > Call timers > Life timer. Some
timers, including the life timer, may be reset during service or software upgrades.
Clear timers
In the standby mode, select Menu > Call log > Call timers > Clear timers > OK.
Enter your security code, and press OK. See "Security settings," p. 72 for more
information. All call timers, except the life timer, are reset to zero when Clear
timers is selected.
■ View duration of data/fax calls
Data/fax calls are a network service. See "Network Services," p. 6 for more
information. If your wireless service provider supports this feature, you can
view the size or duration of sent or received data and fax calls.
Note: The actual time invoiced for calls and services by your service
provider may vary, depending on network features, rounding off for
billing, taxes, and so forth.
1. In the standby mode, select Menu > Call log > Data/fax calls.
2. Scroll to one of the following options:
Last sent data/fax—View the size (KB) of the last send data/fax call.
Last received data/fax—View the size (KB) of the last received data/fax call.
All sent data/fax—View the size (KB) of all sent data and fax calls.
All received data/fax—View the size (KB) of all received data and fax calls.
Duration of last data/fax call—View the duration time of the last data or
fax call.
43
Copyright © 2005 Nokia
Duration of all data/fax calls—View the duration time of all calls.
Clear all data/fax logs—Press OK > Yes to clear all data/fax logs.
■ View duration of minibrowser
Minibrowser is a network service. See "Network Services," p. 6 for more
information. If your wireless service provider supports this feature, you can view
the size or duration of sent or received data from the Minibrowser.
Note: The actual time invoiced for calls and services by your service
provider may vary, depending on network features, rounding off for
billing, taxes, and so forth.
1. In the standby mode, select Menu > Call log > Minibrowser calls.
2. Scroll to one of the following options:
Last sent browser data—View the size (KB) of the last send browser data.
Last received browser data—View the size (KB) of the last received data.
All sent browser data—View the size (KB) of all sent browser data.
All received browser data—View the size (KB) of all received browser data.
Last browser session—View the duration time of the last browser session.
All browser sessions—View the duration time of all browser sessions.
Clear all browser logs—Press OK > Yes to clear all browser logs.
44
Copyright © 2005 Nokia
Contacts (Menu 3)
6. Contacts (Menu 3)
The contacts list can hold up to 500 contacts with multiple numbers and text
notes for each contact. The amount of numbers and text entries that you can
save may vary, depending on length and the total number of entries in the
contacts list.
To access the contacts list, press the Right soft key, Names.
■ Add new contacts
Save a name and number
1. In the standby mode, use the keypad to enter the phone number you wish
to save.
2. Press Save.
3. Enter the name, and press OK.
Save (only) a number
1. In the standby mode, use the keypad to enter the phone number you wish
to save.
2. Press and hold Options until the number is saved to phone memory.
Save an entry
1. In the standby mode, select Names > Add new.
2. Enter the name, and press OK.
3. Enter the phone number, and press OK > Done.
Save multiple numbers and text items
You can save different types of phone numbers and short text items per name to
the contacts list. The first number you save for any entry is automatically set as
the default, or primary number, but the primary number can always be changed.
1. In the standby mode, use the Scroll down key to scroll to the entry to which
you wish to add a phone number or text item.
Or, select Go to > Names > Search and scroll to the entry to which you wish
to add a phone number of text item.
45
Copyright © 2005 Nokia
2. Select Details > Options > Add number or Add detail.
If you selected Add number, select General, Mobile, Home, Work, or Fax.
If you selected Add detail, select E-mail, Web address, Street address, or Note.
3. Enter the number or text for the type you have selected, and press OK.
4. To change a number type (General, Mobile, Home, Work, or Fax), select
Change type in the options list.
You can also change which phone number is the default (primary) number for the
contact entry.
1. In the standby mode, press the Scroll down key to select the number you
wish to change, and press Details.
2. Scroll to the number you wish to set as default, and select Options >
Set as default.
Set up voice tags
For more information on setting up voice tags and other voice features, see
"Voice tags," p. 39.
Caller groups
You can add contacts list entries to any of five caller groups, and then assign a
unique ringing tone to that group. This enables you to identify callers from the
group by their unique ringing tone.
Setup a group
1. In the standby mode, press the Scroll down key to display a list of entries in
your contacts list.
2. Scroll to a name you would like to add to a caller group, and press Details.
3. Select Options > Caller groups.
4. Scroll to the caller group to which you would like to add the name, and
press Select.
Options
1. In the standby mode, select Menu > Contacts > Caller groups.
Family, VIP, Friends, Business, and Other are the available caller groups.
46
Copyright © 2005 Nokia
Contacts (Menu 3)
2. Use the Four-way scroll key to highlight a group, and press Select to display
the following caller group options:
Group name—Rename the group to your preference.
Group ringing tone—Set the ringing tone for the group.
Group members—Add or remove members from the caller group.
Set up 1-touch dialing
You can associate any entry in the contacts list with a key from 2–9; then dial
those entries by pressing and holding the assigned key. T o activate or deactivate,
see "1-touch dialing," p. 65.
Assign a key to 1-touch dialing
1. In the standby mode, select Menu > Contacts > 1-touch dialing.
2. Scroll to an (empty) 1-touch dialing slot, and press Assign.
3. Enter the number (including the area code), and press OK; or press Search to
retrieve a number from the contacts list.
4. Enter a name for the number, and press OK.
If 1-touch dialing is off, the phone displays a prompt asking if you would like
to turn 1-touch dialing on.
5. Press Yes to activate 1-touch dialing.
Change 1-touch dialing numbers
1. In the standby mode, select Menu > Contacts > 1-touch dialing.
2. Scroll to the 1-touch dialing entry you wish to change, and select
Options > Change.
3. Enter the new number; or press Search to retrieve a number from the
contacts list, and press OK.
4. Enter a name for the entry, and press OK.
Delete 1-touch dialing numbers
1. In the standby mode, select Menu > Contacts > 1-touch dialing.
2. Scroll to the 1-touch dialing location you wish to delete, and press Options.
3. Select Delete > Yes.
47
Copyright © 2005 Nokia
■ Edit contacts list entries
1. Select Names > Search and highlight the entry you would like to edit, and
press Details.
2. Scroll to the phone number or detail you wish to edit, and press Options.
3. Select one of the following options. Some of the options may be available:
Add voice tag—Highlight a number in your contacts details and add a voice
tag to the contact.
Edit number /Edit detail—Edit an existing phone number or the details
attached to the contact.
Delete number/Delete detail—Delete a phone number or the details attached
to the contact.
Use number—Edit the number and press Options to use the number.
Change type—Change the number type to General, Mobile, Home, Work, or
Fax or the detail type to E-mail, Web address, Street address, or Note.
Set as default—Change the default number of the contact.
Add number—Add a number to the contact.
Add detail—Add an address or note to the contact.
Add image-Add a photo to the contact.
Caller groups—Add the contact to an existing caller group.
Custom tone—Set a ringing tone to the contact different than the default.
Send bus. card—Send the contact as a business card to another phone.
Send message—Create and send the contact a TXT Message.
1-touch dialing—Add the contact to your 1-touch dialing list.
Edit name—Edit the name of the contact.
View name—View the name of the contact.
Delete—Delete the entire contact entry from your contacts list.
4. Edit the option to your preference, and press OK.
48
Copyright © 2005 Nokia
Contacts (Menu 3)
■ Delete contacts list entries
1. In the standby mode, select Names > Delete.
2. To delete individual entries, select One by one.
3. Scroll to the entry you wish to delete, and select Delete > Yes to confirm.
4. To delete the entire contents of your contacts list, select Delete all > Yes.
5. Enter the lock code, and press OK. See "Security settings," p. 72 for
more information.
■ View the contacts list
1. In the standby mode, select Names. The following options are displayed:
Search—Find a name or select from a list.
Add new—Add a contact to your contacts list.
Edit name—Edit an existing name.
Delete—Delete a name and its associated numbers.
Settings—Change the contacts list view or check the memory status of
your phone.
1-touch dialing—View or modify the list of 1-touch dialing numbers.
Voice tags—Attach, listen to, or modify a voice tag to a contact in the
contacts list.
Own number—View your own phone number.
Caller groups—View and edit the properties for any of the caller groups,
including Family, VIP, Friends, Business, or Other.
2. Scroll to an item, and press Select to activate the feature or enter its submenu.
Search for a name
1. In the standby mode, press Names > Search and use the Scroll down key to
display the contents of your contacts list.
2. Press the key which corresponds to the first letter of the name for which you
are performing a search.
3. Scroll up and down to select a contact, and press Details to view the details.
49
Copyright © 2005 Nokia
Configure settings
You can select how the contacts appear in your contacts list and view the
amount of memory used or available in your phone.
1. In the standby mode, select Names > Settings.
2. Select one of the following options:
Scrolling view—Select Normal name list, Name and number, Large name list,
or Name and image view.
Memory status—View the amount of phone memory used as well as the
amount of phone memory available
■ Send and receive contacts (business cards)
You can send and receive an entry in your contacts list using text messaging, if
supported by your wireless provider.
Send a business card
You can send a business card as a TXT Message to a compatible phone or other
handheld device.
1. Highlight the entry from the contacts list that you wish to send, and select
Details > Options > Send bus. card > Via infrared, Via text message, Via
Bluetooth or Via multimedia.
2. Enter the number for your recipient, or press Search to retrieve a number
from your contacts list.
3. Press OK and the business card is sent.
50
Copyright © 2005 Nokia
Camera (Menu 4)
7. Camera (Menu 4)
You can take photos and record video clips with the built-in
camera and adjust its settings. The camera lens is on the front of the phone. The
color display and the mini display on the front of the phone work as a viewfinder.
The camera produces photos in JPEG format and video clips in H.263 (SubQCIF)
format. After you take a picture or video, you can attach it to a multimedia
message, send it with MMS, save it as a wallpaper, or send it to Pix place. When
you attach a picture to an entry in your list of contacts, the picture is displayed
when the contact calls you.
If there is not enough memory to take a new photo, delete old photos or other
files in the gallery.
The Nokia 6256i devices support an image capture resolution of 128 x 160 pixels
on the Main display and 96 x 65 pixels on the Mini display. The image resolutions
in these materials may appear different.
■ Take a photo
1. Press the Camera key, or in the standby mode, select Menu > Camera >
Options > Change mode > and scroll to Standard photo, Portrait photo,
Night mode, orVideo and press Select. Or use the Left/Right scroll keys to
change mode.
To switch between Standard photo and Video, press the Camera key.
Standard photo-When you want to take normal landscape photos.
Portrait photo—When you want to take a smaller icon-sized, vertical photo,
which can be added to an entry in your contacts list.
Night mode—To take a photo when the lighting is dim and the camera needs a
longer exposure time for the photo to be of good quality
Video—To record a video.
2. Press Capture or the Camera key to take the photo.
When taking a photo, a shutter sound is heard. The phone saves the photo
in the Images folder of the Gallery menu. The saved photo is shown on
the display.
51
Copyright © 2005 Nokia
3. Select Back to take another photo, or press Options and choose from one of
the following:
Zoom—Zoom in closer before capturing a photo or get a closer look at the
captured photo; use the Up/Down scroll keys to navigate around the photo.
Send—Select Via multimedia, Via infrared, or Via Bluetooth to send a photo to
a compatible phone or PC.
Rename—Enter or edit the name of the captured photo and press OK.
Open Gallery—Open the Gallery to view saved images, videos, and recordings.
Set contrast—Use the Right or Left scroll keys to adjust the contrast of the
captured photo.
Set as wallpaper—Use a captured photo for wallpaper.
Details—View the Name, Size, Created, Format, Resolution, or Copyright of a
captured photo.
Other options
In the standby mode, select Menu > Camera, or press the Camera key and Options:
Change mode—Switch between Standard photo, Portrait photo, Night mode
or Video.
Zoom—Zoom in closer before capturing a photo or get a closer look at the
captured photo; use the Up/Down scroll keys to navigate around the photo.
Flash on or Flash off—Select to capture a photo using the flash, or without the flash.
Self-timer—Set a timer to delay capturing a photo for 10 seconds.
Use main display/Use mini display—Change the viewfinder. Use the main display
or the mini display. Use the mini display to take a self-portrait.
View previous—View the previously captured photo.
Open Gallery—Open the Images folder in the Gallery menu.
Settings—Select the Default mode, Image quality, Video clip length, Camera
sounds, Default title, and Image storage.
Self-timer
You can set the timer on the camera to delay for approximately 10 seconds
before capturing the photo.
1. In the standby mode, select Menu > Camera > Options > Self-timer.
52
Copyright © 2005 Nokia
Camera (Menu 4)
2. Press Select > Start.
A beep sounds while the self-timer is running, and beeps faster when the
camera is about to capture the photo. After the timeout, the camera takes the
photo and saves the photo in the Images folder of the Gallery menu.
Select Back > Options > Self-timer to capture another photo. Or select
Options for the list of "Other options," p. 52.
■ Record a Video clip
1. In the standby mode, select Menu > Camera > Options > Change mode >
Video > Record.
While you are recording, the indicator and the remaining recording time are
shown at the top of the display.
2. Select Pause to pause the recording, Continue to resume the recording, or
Stop to stop the recording.
The phone saves the recording in the Video clips folder of the Gallery menu.
3. Select Back to record another video.
OR
Select Options and one of the following:
Delete—Delete the video clip.
Send—Send the video clip to another device as a multimedia message or
using IR or Bluetooth connectivity.
Rename—Rename the video clip.
Open Gallery—Go to the Video clips folder in the gallery.
Mute audio or Unmute audio—Turn the sound on or off.
Set contrast—Increase or decrease contrast of the selected video using the
Scroll right and Scroll left keys.
Details—View details of the selected video, such as name, size, time and date
created, length, file format, and copyright information.
53
Copyright © 2005 Nokia
■ Settings
In the standby mode, select Menu > Camera > Options > Settings.
Scroll to one of the following options and press Select:
Default mode—Scroll to Standard photo, Portrait photo, Night mode or Video as
the default and press Select.
Image quality—Define file compression when saving the image. Scroll to High,
Normal, or Basic and press Select. High has the least file compression and
provides the best image quality, but takes more memory.
Image size—Select 640x480, 320x240, or 160x120 to change image size or
resolution. Higher resolutions produce better quality images.
Video clip length—Scroll to Default or Maximum and press Select. The maximum
is approximately 4 minutes depending on conditions. Only video clips that are
default length or shorter can be sent in a multimedia message.
Camera sounds—Scroll to On or Off and press Select.
Default title—Select Automatic to use a predefined title or My title to key in or
edit a new title.
Image storage—Select Default folder or Other folder and press Select. This option
is available only when using a multimedia card.
54
Copyright © 2005 Nokia
Gallery (Menu 5)
8. Gallery (Menu 5)
You can save pictures, video clips, recordings, and ring tones to
folders in the gallery, and add new folders to the ones already there. You can
download images and tones using MMS, SMS, or mobile web sites.
Note: Only devices that offer compatible multimedia message or e-mail
features can receive and display multimedia messages.
Your phone supports a digital rights management system to protect content that
you have acquired. A piece of content, such as a ringing tone, can be protected
and associated with certain usage rules, for example, the number of usage times
or a certain usage period. The rules are defined in the content activation key that
can be delivered with the content or separately, depending on the service provider.
You may be able to update these activation keys. Always check the delivery terms
of any content and activation key before acquiring them, as they may be subject
to a fee.
Copyright protection may prevent some images, ring tones, and other content
from being copied, modified, transferred, or forwarded.
Your phone has about 7.5 MB of memory for storing files in the gallery. This memory
is not shared with other functions, such as contacts. If the phone displays a
message that the memory is full, delete some existing files before proceeding.
You can also use a compatible MultiMediaCard to add memory.
Warning: Use only compatible Multimedia cards (MMC) with this device.
Other memory cards, such as secure digital (SD) cards, do not fit in
the MMC card slot and are not compatible with this device. Using an
incompatible memory card may damage the memory card as well as the
device, and data stored on the incompatible card may be corrupted.
■ Folders
1. In the standby mode, select Menu > Gallery.
A list of folders is displayed. Images, Video clips, Music files, Graphics, Tones,
and Recordings are preset in the phone. If there is a MultiMediaCard in the
phone, a MultiMediaCard icon is also displayed.
2. Scroll to a folder, and select Open to view a list of the files in the folder.
Or select Options to access the following:
55
Copyright © 2005 Nokia
Delete folder—Delete a folder you have created. You cannot delete a
preset folder.
Move—Move the selected folder into another folder. After selecting Move,
scroll to another folder, and select Options > Move here. You cannot move a
preset folder.
Rename folder—Rename a folder you have created. You cannot rename a
preset folder.
Set password—Create a password (1–8 characters) for the MultiMediaCard,
to protect it against unauthorized use. This option is available only for the
MultiMediaCard folder.
Change password—Change the MultiMediaCard password that you have
created. This option is available only for the MultiMediaCard folder.
Delete password—Delete the MultiMediaCard password that you have
created. This option is available only for the MultiMediaCard folder.
Rename mem. card—Enter a name for the MultiMediaCard. This option is
available only for the MultiMediaCard folder.
Format mem. card—Delete all files and folders stored on the MultiMediaCard.
This option is available only for the MultiMediaCard folder.
Details—Show the name, size, and date of creation of the selected folder.
Type of view—Select List, or Grid to determine how the folders and the files
within folders are displayed.
Sort—Sort the contents of the selected folder by name, date, format, or size.
Add folder—Create a new folder.
Memory status—Check the available memory for the phone handset or the
MultiMediaCard.
Activation key list—View the list of available activation keys. You can delete
activation keys if desired.
56
Copyright © 2005 Nokia
Media (Menu 6)
9. Media (Menu 6)
■ Media player
The media player allows you to play videos and audio received via MMS. Check
the availability of these services, pricing, and tariffs with your network operator
or the service provider whose service you wish to use. Service providers will also
give you instructions on how to use their services.
In the standby mode, select Menu > Media > Media player > Open Gallery.
From the gallery, you can play stored audio and video files. See "Gallery (Menu 5),"
p. 55.
■ Radio
Your phone has an FM radio that also functions as an alarm clock radio. You can
listen to the FM radio on your phone through the hands-free speaker or with a
headset. For FM stereo, connect a compatible music stand or stereo headset to
the connector on the bottom of the phone.
The FM radio uses the wire of the headset as an antenna. A compatible headset
needs to be attached to the device for the FM radio to function properly.
The quality of a radio broadcast depends on coverage of the radio station in that
particular area.
Warning: Listen to music at a moderate level. Continuous exposure to
high volume may damage your hearing.
Turn the radio on and off
1. Connect the phone to a compatible headset or music stand.
2. In the standby mode, select Menu > Media > Radio.
3. To turn off the radio, press and hold the End key.
Use the radio
With the radio on, select Options and one of the following:
Turn off—Turn off the radio.
Save channel—Save the current station to one of 20 locations.
57
Copyright © 2005 Nokia
Automatic tuning:—Briefly press the Scroll up key or the Scroll down key to start
the channel search up or down. Select OK when a channel is found.
Manual tuning:—Press the Scroll up key or the Scroll down key to search in
increments of 0.05 MHz.
Set frequency—Manually enter the frequency of a known radio station.
Delete channel—Delete a saved channel.
Loudspeaker / Headset—Listen to the radio through the speakerphone or through
the headset.
Mono output/Stereo output—Listen to the radio in monaural mode (default) or in
stereo. Stereo output is available through a stereo enhancement.
Rename—Enter a new name for the saved channel, and select OK.
To set the radio frequency, press the * key and use the keypad to enter the
frequency of a known radio station. To tune the radio manually, press the # key;
then press the Scroll up key or the Scroll down key to search in increments of
0.05 MHz.
To adjust the radio volume, press the Volume up and Volume down keys.
When an application using a browser connection is sending or receiving data, it
may interfere with the radio.
When you place or receive a call, the radio automatically mutes. Once the call is
ended, the radio switches back on.
Save a radio channel
You can save a preset station to any one of 20 locations in memory, and then
tune to that station by pressing the Scroll up key or the Scroll down key with the
radio on.
1. With the radio on, press and hold the Scroll up key or the Scroll down key to
start the channel search.
Searching stops when a channel is found.
2. To save the channel, select Options > Save channel.
3. Enter a name for the channel, and select OK.
4. Select an (empty) location to save the channel.
To save an FM station quickly to 1–9 memory locations, press and hold the
corresponding number key while the radio is playing. Then, enter the name of the
channel, and select OK.
58
Copyright © 2005 Nokia
Media (Menu 6)
■ Voice recorder
You can make a short (up to 3 minutes) recording and save it to the Recordings
folder or another folder in the Gallery.
A short press of the Voice/shutter key starts and stops voice memo recorder.
Make a recording
1. In the standby mode, select Menu > Media >Voice recorder.
2. To start the recording, select Record.
3. Hold the phone in the normal position near your ear, and record your message.
4. To stop the recording, select Stop.
The recording is saved in the Recordings folder of the Gallery.
5. To replay the latest recording, select Play last recorded.
6. To send the latest recording as a multimedia message or by IR or Bluetooth to
a compatible phone, select Send last recorded.
Define a storage folder
You can select a folder other than Recordings as the default folder to store your
voice recordings.
1. In the standby mode, select Menu > Media > Voice recorder > Select memory.
2. Scroll to a folder in the gallery, and select Options > Select.
Manage recordings
1. In the standby mode, select Menu > Media > Voice recorder > Recordings list.
2. Scroll to the Recordings folder or the folder that you have defined for storing
recordings, and select Open.
3. Use the options available in the Gallery.
59
Copyright © 2005 Nokia
10. Settings (Menu 7)
Use this menu to change profiles, main display settings, mini display settings,
tone settings, time and date settings, call settings, phone settings, voice
commands, enhancement settings, security settings, application settings,
network settings, network services, and restore factory settings.
■ Profiles
Profiles define how your phone reacts when you receive a call or message, how
your keypad sounds when you press a key, and more. Ringing options, keypad
tones, and other settings for each of the available profiles can be left at their
default setting, or personalized to suit your needs. The following profiles are
available: Normal, Silent, Meeting, Outdoor, and Pager.
Profiles are also available for enhancements such as a headset and car kit. See
"Enhancement settings," p. 71 for more information about enhancement profiles.
1. In the standby mode, select Menu > Settings > Profiles.
2. Scroll to the profile of your choice, and press Select.
3. Select Activate.
Customize a profile
You can personalize any of the profiles a variety of ways.
1. In the standby mode, select Menu > Settings > Profiles.
2. Select the profile you wish to customize.
3. Select Customize.
4. Select the option you want to customize (Incoming call alert, Ringing tone,
Ringing volume, Vibrating alert, Message alert tone, Keypad tones, Warning
tones, Alert for, or Profile name).
Note: You cannot rename the Normal profile.
Set a timed profile
Timed profiles can be used to prevent missed calls. For example, suppose you
attend an event that requires your phone be set to Silent before the event starts,
but you forget to return it to Normal until long after the event. A timed profile
can prevent missed calls by returning your phone to the default profile at a time
you specify.
60
Copyright © 2005 Nokia
Settings (Menu 7)
Note: Timed profiles can be set up to 24 hours in advance.
1. In the standby mode, select Menu > Settings > Profiles.
2. Select the profile you wish to activate and set for timed expiration.
3. Select Timed.
4. Enter the time for the profile to expire, and press OK.
■ Main display settings
Wallpaper
You can set your phone to display a background picture (wallpaper) in the
standby mode.
1. In the standby mode, select Menu > Settings > Main display settings >
Wallpaper > Select wallpaper.
2. Highlight the Graphics folder, and press Open.
3. Browse the folder.
4. When you arrive at the image of your choice, select Options > Set as wallpaper.
To activate/deactivate wallpaper, in the standby mode, select Menu > Settings >
Main display settings > Wallpaper > On or Off.
Color schemes
You can change the color of some display components in your phone, such as
indicators and signal bars.
1. In the standby mode, select Menu > Settings > Main display settings >
Color schemes.
2. Scroll to the color scheme of your choice, and press Select.
Choose a banner
Banner is a network service. See "Network Services," p. 6 for more information.
If your wireless service provider supports this feature, you can choose whether
the display shows the operator logo when the phone is in the idle state.
In the standby mode, select Menu > Settings > Main display settings > Banner >
Default or Customize.
61
Copyright © 2005 Nokia
Menu view
You can change the view of the main menu. The grid view shows menu icons
only, and the list view shows a list of icons with the names.
In the standby mode, select Menu > Settings > Main display settings >
Menu view > List or Grid.
■ Mini display settings
You can select display settings for the mini display on the front of your phone.
Wallpaper
In the standby mode, select Menu > Settings > Mini display settings >
Wallpaper > Select wallpaper.
Color schemes
In the standby mode, select Menu > Settings > Mini display settings >
Color schemes > Blue, Brown, Gray, Green, Orange, Pink, Red, or Violet.
Screen saver
In the standby mode, select Menu > Settings > Mini display settings > Screen
saver > On, Off, Select s. saver, or Time-out.
■ Tone settings
You can adjust the ringing volume, keypad tones, and more for the active profile.
Select Menu > Settings > Tone settings and one of the following:
Incoming call alert—Select how the phone notifies you of an incoming call.
Ringing tone—Select the ringing tone for incoming calls.
Ringing volume—Set the volume of your ringing tone.
Vibrating alert—Turn the vibrating alert on or off.
Message alert tone—Select the tone for received messages.
Keypad tones—Set the volume of your keypad tones (or turn them off).
Warning tones—Turn warning and confirmation tones on or off.
Alert for—Define which caller groups the selected profile will accept or decline.
See "Caller groups," p. 46 for more information.
62
Copyright © 2005 Nokia
Settings (Menu 7)
■ Time and date settings
Clock
Show/hide the clock
In the standby mode, select Menu > Settings > Time and date settings > Clock >
Show clock or Hide clock.
Set the time
1. In the standby mode, select Menu > Settings > Time and date settings >
Clock > Set the time.
2. Enter the time (in hh:mm format), and press OK.
3. Select am or pm (if 12-hour format is selected).
Time zone
Select your time zone based on Greenwich Mean Time (GMT), plus or minus hours
in your time zone. For example, GMT - 8 is US Pacific time in Los Angeles, CA.
GMT does not include Daylight savings time, so add or subtract accordingly.
Time format
In the standby mode, select Menu > Settings > Time and date settings > Clock >
Time format > 24-hour or 12-hour.
Date
Show/hide the date
In the standby mode, select Menu > Settings > Time and date settings > Date >
Show date or Hide date.
Set the date
1. In the standby mode, select Menu > Settings > Time and date settings >
Date > Set the date.
2. Enter the date, and press OK.
Change the date format
1. In the standby mode, select Menu > Settings > Time and date settings > Date.
2. Scroll to the Date separator, and press Select.
3. Select the separator of your choice.
63
Copyright © 2005 Nokia
4. Scroll to Date format, and press Select.
5. Select the format of your choice.
Set the auto-update of date and time
Auto-update is a network service. See "Network Services," p. 6 for more
information.
If your wireless service provider supports this feature, you can allow the digital
network to set the clock, which is useful when you are out of your home area, for
instance when you have traveled to another network or time zone.
In the standby mode, select Menu > Settings > Time and date settings > Auto-
update of date & time > On, Confirm first, or Off.
If you use the Auto-update of date & time option while outside your digital
network, you may be prompted to enter the time manually. Network time will
replace the time and date when you re-enter your digital network.
If your battery has been removed or has drained outside the digital network, you
may be prompted to enter the time manually (once the battery is replaced or
recharged, and you are still outside of the digital network).
■ Call settings
Location info sharing
Location info sharing is only available for the Nokia 6256i phone. Location info
sharing is a network service. See "Network Services," p. 6 for more information.
If your wireless service provider supports this feature, then location info sharing
allows the phone to share position information over the network. For calls to
emergency numbers, this position information may be used by the emergency
operator to determine the position of the phone. The functionality and accuracy
of this feature is dependent on the network, satellite systems, and the agency
receiving the information. It may not function in all areas or at all times.
In the standby mode, select Menu > Settings > Call settings > Location info
sharing > 911 only or Location on > Yes or No.
911 only—This is the default profile. The phone location information is shared
only during an emergency call to the official emergency number programmed
into your phone. The phone screen displays
the screen in the standby mode.
in the upper left hand corner of
64
Copyright © 2005 Nokia
Settings (Menu 7)
Location on—The phone location information is shared with the network whenever
the phone is powered on and activated. The screen displays
left hand corner.
in the upper
Note: Location information will always be shared with the network
during emergency calls to the official emergency number programmed
into the phone, regardless of which setting is selected. After placing an
emergency call the phone remains in emergency mode for five minutes.
During this time, the location information will be shared with the
network. For more information, see "Emergency calls," p. 104.
Anykey answer
Anykey answer allows you to answer an incoming call by briefly pressing any key
except the Power key, Right soft key, or End key.
In the standby mode, select Menu > Settings > Call settings > Anykey answer >
On or Off.
Automatic redial
Occasionally, your network may experience heavy traffic, resulting in a fast busy
signal when you dial. With automatic redial activated, your phone redials the
number (number of times is specified by the network), and notifies you once the
network is available.
In the standby mode, select Menu > Settings > Call settings > Automatic redial >
On or Off.
1-touch dialing
You can activate or deactivate 1-touch dialing. In the standby mode, select Menu >
Settings > Call settings > 1-touch dialing > On or Off. For more information on
entering 1-touch dialing numbers, see "Set up 1-touch dialing," p. 47.
Answer when fold is opened
Set your phone to answer a call when you open the fold. If the setting is off, you
must press the Send key after you open the fold.
In the standby mode, select Menu > Settings > Call settings > Answer when fold
is opened > On or Off.
65
Copyright © 2005 Nokia
Calling card
If you use a calling card for long distance calls, you can save the calling card
numbers in your phone. Your phone can store up to four calling cards.
Note: Contact your calling card company for more information.
Save information
1. In the standby mode, select Menu > Settings > Call settings > Calling card.
2. Enter your lock code, and press OK. See "Security settings," p. 72 for
more information.
3. Scroll to one of the four card memory locations, and select Options > Edit >
OK > Dialing sequence.
4. Select one of the following sequence types:
Access no.+ phone no.+ card no.—Dial 1-800 access number, phone number,
then card number (+ PIN if required)
Access no.+ card no.+ phone no.—Dial 1-800 access number, card number
(+ PIN if required), then phone number
Prefix+ phone no.+ card no.—Dial the prefix (numbers that must precede
the phone number) and phone number you want to dial, then card number
(+ PIN if required)
5. Enter the required information (access number or prefix and card number),
and press OK to confirm your entries.
6. Select Card name.
7. Enter the card name, and press OK.
Make calls
After you have saved your calling card information in your phone, you can make a
call using your calling card.
1. In the standby mode, select Menu > Settings > Call settings > Calling card.
2. Enter your lock code, and press OK. See "Security settings," p. 72 for
more information.
3. Scroll to the calling card of your choice, select Options > Select > OK.
4. Press the End key to return to the standby mode; then enter the phone
number, including any prefix (such as 0 or 1) that your calling card may
require when you make a calling card call.
See your calling card for instructions.
66
Copyright © 2005 Nokia
Settings (Menu 7)
5. Press and hold the Send key for a few seconds until Card call is displayed.
6. When you hear the tone or system message, press OK.
International prefix
For international calls, press the */+ key twice for the international prefix (the +
character replaces the international access code) and then key in the country
code, the area code without 0, and the phone number.
Calls described here as international, in some cases, may be made between
regions of the same country.
Data/fax calls
Data or fax calls is a network service. See "Network Services," p. 6 for
more information.
If your wireless service provider supports this feature, you can set up the phone to
send or receive data or fax calls when a terminal, such as a PDA or PC, is connected.
For better performance during data calls, place the phone on a stationary surface
with the keypad facing downward. Do not move the phone by holding it in your
hand during a data call.
. 1. In the standby mode, select Menu > Settings > Call settings > Data/fax calls >
Incoming data/fax call.
2. Select one of the following options:
Normal—The phone receives incoming calls as usual.
Data calls only—The phone receives only data calls.
Fax calls only—The phone receives only fax calls.
3. When you are finished receiving the fax or data call, repeat Steps 1 and 2 and
select Normal.
Data transfer
You can view the transmission speed when sending or receiving data or fax calls.
In the standby mode, select Menu > Settings > Call settings > Data/fax calls >
Data rate display > Graphic or Off.
Call summary
Your phone can display the time spent on a call when you hang up.
In the standby mode, select Menu > Settings > Call settings > Call summary >
On or Off.
67
Copyright © 2005 Nokia
Ringing tone for no caller ID
You can select a different ringing tone for calls received with no caller ID.
In the standby mode, select Menu > Settings > Call settings > Ringing tone for no
caller ID > On or Off. See "Customize a profile," p. 60 for more information on
selecting a ringing tone.
■ Phone settings
Phone language
1. In the standby mode, select Menu > Settings > Phone settings > Phone language.
2. Scroll to the language of your choice and press Select.
The phone language affects the time and date formats of the clock, alarm clock,
and calendar.
Touch tones
Touch tones are the tones that sound when you press the keys on your phone
keypad. You can use touch tones for many automated dial-up services such as
banking and airlines, or for entering your voice mailbox number and password.
Touch tones are sent during an active call. You can send them manually from
your phone keypad, or send them automatically by saving them in your phone.
Set type
1. In the standby mode, select Menu > Settings > Phone settings > Touch
tones > Manual Touch tones.
2. Select one of the following options:
Continuous—The tone sounds for as long as you press and hold a key.
Fixed—Used to send tones of the duration you specify in the Touch tone
length option.
Off—Used to turn off tones. No tones are sent when you press a key.
Set length
You can also specify touch tone length when using the Fixed option.
In the standby mode, select Menu > Settings > Phone settings > Touch tones >
Touch tone length > Short (0.1 seconds) or Long (0.5 seconds).
68
Copyright © 2005 Nokia
Settings (Menu 7)
Memory status
You can view the size of memory available on the handset and the memory card.
In the standby mode, select Menu > Settings > Phone settings > Memory status >
Handset or Memory card.
Start-up tone
You can select to have a start-up tone when you first turn on your phone.
In the standby mode, select Menu > Settings > Phone settings > Start-up tone >
On or Off.
Welcome note
You can write a welcome note that briefly appears on the display screen
whenever you switch your phone on.
Note: Predictive text input is not available for welcome note text.
1. In the standby mode, select Menu > Settings > Phone settings > Welcome note.
2. Enter a note (up to 44 characters).
Press the * key to display and select from available special characters.
3. When you are finished, select Options > Save.
Select Delete if you want to delete the previous text and begin creating
another welcome note.
Help text activation
Your phone displays brief descriptions for most menu items. When you access a
feature or menu, pause for about 10 seconds and wait for the help text to be
displayed. Use the scroll keys to page through the full help text, if necessary.
The default setting for help text is on. However, you can turn help text on or off.
In the standby mode, select Menu > Settings > Phone settings > Help text
activation > On or Off.
■ Voice commands
You can set as many as five voice commands, which allow hands-free operation
of certain phone features.
69
Copyright © 2005 Nokia
Assign a voice tag to a command
Before using voice commands, you must first add a voice tag to the phone function.
1. In the standby mode, select Menu > Settings > Voice commands.
2. Select the phone function you wish to tag (Profiles, Voice mailbox, Radio,
Infrared, Voice recorder or Call log).
3. If necessary, scroll to an option associated with that function, and press Select.
4. Select Options > Add.
5. Press Start, and speak the voice tag clearly into the microphone.
Note: Do not press Quit unless you want to cancel the recording.
The phone replays and then saves the recorded tag. The
commands which have voice tags assigned.
icon appears next to
Activate a voice command
After you have associated a voice tag with a phone function, you can issue a
command by speaking the voice tag.
1. Press and hold the Right soft key.
2. When Please speak now appears, pronounce the voice tag clearly into
the microphone.
When the phone finds the voice tag, Found: appears, and the phone plays the
recognized voice tag through the earpiece. The function you requested is
activated.
Options
After you have associated a voice tag to a command, you can choose one of the
following options:
•
•
•
Select Playback to listen to the voice command tag.
Select Change to change the voice command.
Select Delete to erase the voice command tag.
Voice recorder
This feature allows you to record pieces of speech or sound with your phone and
listen to them later. The total available time is 30 seconds if no memos have been
stored. The maximum length of a recording depends on how much memory
remains available.
70
Copyright © 2005 Nokia
Settings (Menu 7)
Record speech or sound
1. In the standby mode, select Menu > Settings > Voice commands >
Voice recorder > Record.
2. After the recorder start tone is heard, begin recording speech or sound.
3. When you are finished recording, press Stop.
4. Enter the title you wish to assign to the recording, and press OK.
Options
After you have saved the recording to the Recordings list, highlight the recording,
and choose one of the following options:
•
•
•
•
Select Playback to listen to the recording using the earpiece.
Select Delete to erase the recording.
Select Edit title to rename the recording.
Select Add alarm to add an alarm to the recording.
■ Enhancement settings
The enhancement settings menu is shown only if the phone is or has been
connected to a compatible enhancement.
In the standby mode, select Menu > Settings > Enhancement settings > Headset,
Handsfree, Loopset, TTY/TDD, or Charger.
Headset
Scroll to the option of your choice, and press Select to enter the submenu and
modify its settings.
Default profile—Choose the profile you wish to be automatically activated when
a headset is connected.
Automatic answer—Calls are answered automatically after one ring when a
headset is connected. Select On or Off.
Handsfree
Scroll to the option of your choice and press Select to enter the submenu and
modify its settings.
Default profile—Choose the profile you wish to be automatically activated when
your phone is connected to a car kit.
71
Copyright © 2005 Nokia
Automatic answer—Calls are answered automatically after one ring when a car
kit is connected. Select On or Off.
Lights—Choose to keep the phone lights always on, or to shut off automatically
after several seconds. Select On or Automatic.
Loopset
The LPS-4 Loopset interfaces with digital phones for wearers of T-coil equipped
hearing aids. Scroll to the option of your choice, and press Select to enter the
submenu and modify its settings.
Default profile—Choose the profile you wish to be automatically activated when
your phone is connected to a loopset.
Automatic answer—Calls are answered automatically after one ring when a
loopset is connected. Select On or Off.
TTY/TDD
•
Check with the manufacturer of the TTY/TDD device for a connecting cable
that is compatible with the Nokia phone.
•
TTY/TDD communications depend on network availability. Check with your
service provider for availability and description of services.
Charger
Scroll to the option of your choice, and press Select to enter the submenu and
modify its settings.
Default profile—Choose the profile you wish to be automatically activated when
your phone is connected to the charger.
Lights—Choose to keep the phone lights always on, or to shut off automatically
after several seconds. Select On or Automatic.
■ Security settings
Activate or deactivate phone lock
The phone lock feature protects your phone from unauthorized outgoing calls or
unauthorized access to information stored in the phone. When phone lock is
activated, Phone locked is displayed each time you turn your phone on or off.
72
Copyright © 2005 Nokia
Settings (Menu 7)
When the phone is locked, calls still may be possible to the official emergency
number programmed into your phone.
1. In the standby mode, select Menu > Settings > Security settings.
2. Enter the lock code, and press OK.
3. Select Phone lock and one of the following options:
Off—Immediately turns off the phone lock feature.
Lock now—Immediately turns on the phone lock feature.
On power-up—Turns on the phone lock feature the next time you turn the
phone on.
If you selected Lock now, you must enter your lock code before the phone will
function normally. Once the lock code has been accepted, your phone
functions normally.
Note: Call not allowed is displayed if you attempt to place a call while
phone is locked.
To answer a call with phone lock on, press Answer or the Send key.
Allow numbers when lock active
When phone lock is on, the only outgoing calls that can be made are to the
following numbers:
•
•
The emergency number programmed into your phone (for example, 911).
The number stored in the Allowed no. when phone locked location.
1. In the standby mode, select Menu > Settings > Security settings.
2. Enter the lock code, and press OK.
3. Select Allowed no. when phone locked. Select Assign and enter the phone
number; or press Search, recall the number from Contacts, and press OK.
Call the allowed phone number
1. In the standby mode, press the Scroll down key.
2. Press the Send key to place the call.
Change lock code
Note: Avoid using codes similar to emergency numbers such as 911 to
prevent accidental dialing of the emergency number.
73
Copyright © 2005 Nokia
The preset lock code is 1234 or the last four digits of your phone number. If you
enter an incorrect lock code five times in a row, your phone will prompt you for
the security code.
Note: If you enter the wrong lock code 5 times in succession, you will not
be able to enter a code for 5 minutes, even if you power off the phone
between incorrect entries.
1. In the standby mode, select Menu > Settings > Security settings > Enter
lock code.
2. Enter the current (or default) lock code, and press OK.
3. Scroll to and select Change lock code.
4. Enter the new lock code (must be 4 characters in length), and press OK.
5. Reenter the new lock code for verification, and press OK.
Note: When you change your lock code, make sure you store it in a safe
place, away from your phone. Avoid entering access codes similar to
emergency numbers to prevent accidental emergency calls.
Call restrictions
Call restrictions is a network service. See "Network Services," p. 6 for more
information.
If your wireless service provider supports this feature, then you can restrict the
calls your phone can make and receive. When calls are restricted, calls still may
be possible to the official emergency number programmed into your device.
Note: Contact your service provider for the restriction password.
1. In the standby mode, select Menu > Settings > Security settings >
Call restrictions.
2. Enter the lock code, and press OK. See "Change lock code," p. 73 for
more information.
3. Select the types of calls you wish to restrict:
Restrict outgoing calls—Calls cannot be made.
Restrict incoming calls—Calls cannot be received.
4. Select an option (Select, Add restriction, Edit, or Delete).
Note: When calls are restricted, calls still may be possible to the
official emergency number programmed into your phone.
74
Copyright © 2005 Nokia
Settings (Menu 7)
Voice privacy
Voice privacy is a network service. See "Network Services," p. 6 for more
information. If your wireless service provider supports this feature, the voice
privacy feature protects the privacy of your current phone conversation from
other callers placing phone calls on your same network.
In the standby mode, select Menu > Settings > Security settings > Voice privacy >
On or Off.
■ App. settings
1. In the standby mode, select Menu >Settings > App. settings.
2. Scroll to one of the following submenus to activate options for games.
Application sounds—Select On or Off.
Application lights—Select App. defined or Default.
Application shakes—Select On or Off.
■ Network
The menu options you see in your phone are based on your service provider’s
network. The network determines which options actually appear in the phone
menu. Check with your service provider for more information.
The Network menu allows you to customize the way your phone chooses a
network in which to operate while you are within or outside of your primary or
home system. Your phone is set to search for the most cost-effective network.
If your phone cannot find a preferred network, it selects a network automatically
based on the option you choose in the Network menu.
Roaming options
You can set your phone to “roam” or search for another network when you are
not in your home area.
1. In the standby mode, select Menu > Settings > Network > Roaming options.
2. Select one of the following options:
Home —You can make and receive calls in your home area only.
Automatic A—The phone automatically roams to another digital network.
The roaming rate applies when not in the home service area.
75
Copyright © 2005 Nokia
Automatic B—The phone automatically searches for service in another digital
network. If one is not found, the phone uses analog service. The roaming rate
applies when not in the home service area.
3. Press OK, if necessary, to confirm the activation.
Mode
You can choose whether your phone uses digital or analog service.
1. In the standby mode, select Menu > Settings > Network > Mode.
2. Select one of the following service options:
Digital preferred—The phone works in digital mode, but will also work in
analog mode when digital mode is unavailable.
Digital only—The phone only works in digital mode.
Analog per call—Allows analog calls for several minutes. Once the call ends,
the phone searches for a digital network.
IS-95 per call—Allows calls on the IS-95 network. If no calls are placed ten
minutes after IS-95 selection, calls return to the previous network selection.
■ Network services
The following features are network services. See "Network Services," p. 6 for
more information.
Store a feature code
1. In the standby mode, select Menu > Settings > Network services > Network
feature setting.
2. Enter the feature code from your service provider (for example, *86), and
press OK.
3. Select the service that matches the feature code you entered (for example,
Call forwarding).
The activated feature code is now stored in your phone, and you are returned
to the Feature code: field. Continue entering other feature codes (for
example, *633), or press the End key to return to the standby mode.
Note: Once you enter a network feature code successfully the feature
becomes visible in the Network services menu.
76
Copyright © 2005 Nokia
Settings (Menu 7)
Call forwarding
Call forwarding tells your network to redirect incoming calls to another number.
Call forwarding is a network service and may not work the same in all networks,
so contact your wireless provider for availability.
Activate
Note: This is a network service. All options listed may not appear in the
display. Contact your wireless provider for more information.
1. In the standby mode, select Menu > Settings > Network services >
Call forwarding.
2. Select one of the following options:
Forward all calls—Forward all calls to the number you specify.
Forward if busy—Forward incoming calls when you are in a call.
Forward if not answered—Forward incoming calls to another number if you
are unable to answer. You can set a delay before forwarding takes place.
Forward if out of reach—Forward incoming calls when your phone is off.
Cancel all Call forwarding—Cancel any call forwarding options you have set.
3. Select Activate.
4. Scroll to the destination to which your calls will be forwarded, and press Select.
5. Enter the number to which your calls, data, or other information will be
forwarded, and press OK.
Cancel
In the standby mode, select Menu > Settings > Network services > Call
forwarding > Cancel all Call forwarding.
Note: Cancel all call forwarding may affect your ability to receive voice
mail messages. Contact your wireless provider for specific details.
Call waiting
If your wireless provider supports this feature, call waiting notifies you of an
incoming call even while you are in a call. You can then accept, reject, or ignore
the incoming call.
1. In the standby mode, select Menu > Settings > Network services > Call
waiting > Activate or Cancel.
77
Copyright © 2005 Nokia
2. During a call, press Answer or the Send key to answer the waiting call.
The first call is put on hold.
3. Press the End key to end the active call.
Send my caller ID
If your wireless service provider supports this feature, then you can prevent your
number from appearing on the receiving party’s caller ID.
In the standby mode, select Menu > Settings > Network services > Send my caller
ID > Yes or No.
View your own phone number
In the standby mode, select Menu > Settings > Network services > My
number selection.
■ Restore factory settings
You can reset some of the menu settings to their original values. Data that you
have entered or downloaded is not deleted, for example, entries in your contacts
list are not affected.
1. In the standby mode, select Menu > Settings > Restore factory settings.
2. Enter the lock code, and press OK. See "Security settings," p. 72 for
more information.
78
Copyright © 2005 Nokia
Organizer (Menu 8)
11. Organizer (Menu 8)
Your phone contains features to help organize your everyday life, including an
alarm clock, calendar, calculator, countdown timer, and stopwatch.
■ Alarm clock
Set an alarm
The alarm clock is based on the phone clock. It sounds an alert any time you
specify and even works if the phone is turned off.
1. In the standby mode, select Menu > Organizer > Alarm clock > Alarm time.
2. Enter the time for the alarm in hh:mm format, and press OK.
3. Select am or pm (if 12-hour format is selected).
Alarm on appears briefly in the display and
appears on the display in the
standby mode.
Change the time
1. In the standby mode, select Menu > Organizer > Alarm clock > Alarm time > On.
2. Enter the time for the alarm in hh:mm format, and press OK.
3. Select am or pm (if 12-hour format is selected).
Alarm on appears briefly in the display and
appears on the display in the
standby mode.
Repeat an alarm
You can set the alarm to repeat every day or only on certain days of the week.
1. In the standby mode, select Menu > Organizer > Alarm clock > Repeat
alarm > On.
2. Highlight the day (or days) of the week you wish to repeat the alarm and press
Mark. (Use Unmark to remove a day.)
3. Select Done when you have added all desired days.
79
Copyright © 2005 Nokia
Set the alarm tone
You can set which tone is played when the alarm sounds.
1. In the standby mode, select Menu > Organizer > Alarm clock > Alarm tone.
2. Highlight Standard, Radio, Ringing tone, or Open Gallery to choose the tone
of your choice, and press Select.
Use the radio alarm clock
To use the radio, always connect a headset first. The FM radio uses the wire of the
headset as an antenna. A compatible headset needs to be attached to the device
for the FM radio to function properly.
After selecting the radio for the alarm tone and setting the time for the alarm,
connect a headset.
In the standby mode, select Menu > Media > Radio > Options > Loudspeaker:
1. Set the frequency of the radio station to use for the alarm. See "Use the
radio," p. 57.
2. Set the volume using the Volume key. See "Keys and parts," p. 9.
3. Select Options > Turn off. Press Exit to return to the standby mode.
4. Leave the headset connected.
The alarm will turn the radio on at the set time, playing through the loudspeaker.
Alarm conditions
When the alarm sounds, your phone beeps, vibrates, and the display lights up.
With the phone on, press OK to shut the alarm off, or press Snooze. The alarm
stops for 10 minutes and Snooze on appears in the display.
If you do not press a key, the alarms stops (snoozes) for 10 minutes, then
sounds again.
If the alarm time is reached while the device is switched off, the device switches
itself on and starts sounding the alarm tone. If you press Stop, the device asks
whether you want to activate the device for calls. Press No to switch off the
device or Yes to make and receive calls. Do not press Yes when wireless phone use
may cause interference or danger.
Turn an alarm off
In the standby mode, select Menu > Organizer > Alarm clock > Alarm time > Off.
80
Copyright © 2005 Nokia
Organizer (Menu 8)
■ Calendar
The calendar keeps track of reminders, calls you need to make, meetings, and
birthdays. It can even sound an alarm for any of these events.
Monthly view provides an overview of the selected month and weeks. It also allows
you to jump to a specific date. Any days or dates that appear in bold font contain
calendar notes such as a meeting or reminder.
Open
In the standby mode, select Menu > Organizer > Calendar. Press the Scroll down
key for quick access to the calendar.
Go to a date
1. In the standby mode, select Menu > Organizer > Calendar > Options >
Go to date.
2. Enter the date (for example, 07/15/2005), and press OK.
Note a specific date
You can choose from five types of notes: Meeting, Call, Birthday, Memo, and
Reminder. Your phone asks for further information depending on which note you
choose. You also have the option to set an alarm for any note that you select.
1. Go to the date for which you want to set a reminder. See "Go to a date," p. 81
in the previous section if you need more information.
2. From the monthly view (with the go to date highlighted), select Options >
Make a note.
3. Select one of the following note types and proceed accordingly:
Meeting—You are prompted to enter a subject, location, and a start/end time.
You are then given the option to set an alarm.
Call—You are prompted to enter a phone number, a name, and the time.
You are then given the option to set an alarm.
Birthday—You are prompted to enter the person’s name, and year of birth.
You are then given the option to set an alarm.
Memo—You are prompted to enter a subject and an end date. You are then
given the option to set an alarm.
Reminder—You are prompted to enter the subject you wish to be reminded
about, you are then given the option to set an alarm.
81
Copyright © 2005 Nokia
View notes (day view)
After you have created some calendar notes, you can view them as follows:
1. In the standby mode, select Menu > Organizer > Calendar.
2. Scroll to the date containing the note. (Any days containing notes will be in
bold font.)
3. Select View.
4. To view a highlighted note, select View.
Options while viewing a list of notes
1. Press Options while viewing a day’s notes to display the following options:
The options listed below are available either while viewing the body of a note
or viewing the header of a note.
Make a note—Create a new note for the selected date.
Delete—Delete the note.
Edit—Edit the note.
Move—Move the note to another date on your calendar.
Repeat—Enable the note to recur on a regular basis (daily, weekly, biweekly,
monthly, and yearly).
Go to date—Jump to another date on your calendar.
Go to today—Jump to the current day on your calendar.
Send note—Send the note to another device as a TXT Message or in calendar-
to-calendar (vCal) format Via calendar, Via text message, Via infrared, or
Via Bluetooth.
Copy—Copy the note. You can then paste the note to another date.
Settings—Set the date and time, date and time format, the day each week
starts and whether you want your notes to auto-delete after a specified time.
Go to to-do list—Jump to the to-do list on your calendar.
2. Scroll to an option, and press Select to activate it or enter its submenu.
Send a note
1. In the standby mode, select Menu > Organizer > Calendar.
2. Scroll to the date containing the note you wish to send. (Any days containing
notes will be in bold font.)
82
Copyright © 2005 Nokia
Organizer (Menu 8)
3. Select View.
4. Scroll to the note you wish to send, and select Options > Send note > Via
calendar, Via multimedia, Via text message, Via infrared, or Via Bluetooth.
5. If you selected Via calendar, enter the number for the recipient, or press Search
to retrieve a number from the contacts list, and press OK. The note is sent.
6. If you selected Via text message, the note appears as a TXT Message in
the display.
7. Select Send > Send to number, Send to e-mail, Send to many, or Send to
distrib. list.
8. Enter the number for the recipient, or press Search to retrieve a number from
the contacts list, and press OK, and press Send.
Receive vCal notes
When you receive a calendar note in calendar-to-calendar (vCal) format, your
phone displays Calendar note received.
1. Press Show to view the note. Scroll to view the entire message, if necessary.
2. To save the note, select Save.
3. To discard the note after viewing, select Options > Discard, or press Exit.
Receive TXT Message notes
When you receive a calendar note as a TXT Message, a message notification
appears on the display in the standby mode. You can then save the note in your
calendar and set an alarm for any date and time.
■ Notes
You can write and save information in Notes, and send notes via multimedia, via
TXT Message, infrared, or Bluetooth.
1. In the standby mode, select Menu, Organizer > Notes.
2. If there are no notes, select Add note.
3. Enter the information and select Save.
4. Select options Make a note to add another note.
5. Select Edit > Save to change or add information to a note.
6. Select View to read notes, and Delete to discard the note.
7. To send a note, select View, Options > Send note > Via multimedia, Via text
message, Via infrared, or Via Bluetooth.
83
Copyright © 2005 Nokia
■ To-do list
Use the to-do list feature to keep track of your tasks. You can save a note for a
task, select a priority level for the note and mark it as done when you have
completed it. You can sort the notes by priority or by date.
Add a To-do note
1. In the standby mode, select Organizer > To-do list.
2. If there are no notes, select Add note.
3. Or, enter the subject of the to-do note, and select Save.
4. Select either High, Medium, or Low priority.
The to-do note is saved. The phone automatically sets the deadline.
View a To-do note
In the standby mode, select Organizer > To-do list. Scroll to a to-do note, and
select View. The to-do note appears in the display.
Options while viewing to-do notes
Select Options while viewing the header or body of a particular note and the
following options appear:
Add—Add another note (available only in header view).
Deadline—Set a deadline for the note (available only in body view).
Delete—Delete the note.
Mark note as done—Mark a note or task as complete; no more reminders will follow.
Sort by deadline—Sort the notes according to their deadline.
Send —Send the note to another device using IR or Bluetooth, as a text or
multimedia message, or as a calendar note to another compatible phone.
Edit priority—Change the priority to high, medium, or low (available only in
body view).
Go to calendar—Leave the to-do list, and go to the calendar.
Save to calendar—Save the to-do note to a date on your calendar.
Delete all notes—Delete all the to-do notes in the list (available only in header view).
84
Copyright © 2005 Nokia
Organizer (Menu 8)
■ Calculator
The calculator in your phone adds, subtracts, multiplies, divides, calculates the
square and the square root and converts currency values.
1. In the standby mode, select Menu > Organizer > Calculator.
2. Enter the first number in the calculation. (Press the # key for a decimal point
if necessary.)
To perform a square or square root calculation, select Options > Square or
Square root.
3. Press the * key to cycle through the add (+), subtract (-), multiply (*), and
divide (/) characters. Pause briefly to select the displayed character.
4. Enter the second number in your calculation.
5. Press Equals.
Note: Use the Up and Down Scroll keys to change a number from
negative to positive, or select Options > Change sign.
Currency converter
You can convert foreign currency to domestic, or vice versa, directly from the
standby mode or from the Calculator menu.
1. In the standby mode, enter a currency amount to convert, or select Menu >
Organizer > Calculator and enter a currency amount to convert.
2. Select Options > Foreign units in home units or Home units in foreign units.
Foreign units in home units—converts foreign currency to domestic currency.
Home units in foreign units—converts domestic currency to foreign currency.
If you have not done so already, you are prompted to enter the exchange rate.
3. Enter the exchange rate (press the # key to insert a decimal), and press OK.
You can also edit the exchange rate at any time.
Note: When you change base currency, you must key in the new rates
because all previously set exchange rates are set to zero.
1. In the standby mode, select Menu > Organizer > Calculator > Options >
Exchange rate > Foreign unit in home units or Home units in foreign units.
Foreign unit s in home units—the number of home units it takes to make one
unit of foreign currency.
Home units in foreign units—the number of foreign units it takes to make one
unit of your home currency.
2. Enter the exchange rate, and press OK.
85
Copyright © 2005 Nokia
■ Countdown timer
You can enter a specified time (up to 99 hours and 59 minutes). When the time
runs out, your phone sounds an alarm.
Note: The countdown timer only works when the phone is on. Once you
turn off your phone, the timer is no longer active.
Set the countdown timer
1. In the standby mode, select Menu > Organizer > Countdown timer.
2. Enter the time (in hh:mm format), and press OK.
3. Enter a note for the timer, and press OK.
The
icon appears on the display in the standby mode when the countdown
timer is set.
When the time runs out, your phone sounds an alarm, displays the timer note,
and flashes its lights.
•
•
Press any key during the alarm to stop the timer.
After 30 seconds the timer alert expires automatically.
Change the time
After you have set the timer, you can change the time.
1. In the standby mode, select Menu > Organizer > Countdown timer >
Change time.
2. Enter the new time, and press OK.
3. Leave the note as it was, or enter a new note, and press OK.
Stop the timer before the alarm sounds
After you have set the timer, you can stop the timer.
In the standby mode, select Menu > Organizer > Countdown timer > Stop timer.
■ Stopwatch
Your phone has a stopwatch that can be used to track time. The stopwatch displays
time in hours, minutes, seconds and fractions of a second in hh:mm:ss:s format.
Using the stopwatch or allowing it to run in the background when using other
features increases the demand on battery power and reduces the battery life.
86
Copyright © 2005 Nokia
Organizer (Menu 8)
Measure split time
You can use the split time function for such things as a long distance race when
you need to pace yourself.
1. In the standby mode, select Menu > Organizer > Stopwatch > Split timing > Start.
2. Press Split to note the lapsed time.
The timer continues to run. The split time appears below the running time.
If you split the time more than once, the new measured time appears at the
beginning of the list. You can scroll to see previous measured times.
3. Press Stop to end the split timing.
Measure lap time
You can use the lap time function when you want to track how long it takes to
complete each cycle or lap.
1. In the standby mode, select Menu > Organizer > Stopwatch > Lap timing > Start.
2. Press Lap to note the lap time.
The clock stops, then starts immediately from zero. The lap time appears below
the running time. If you take more than one lap time, the new measured time
appears at the beginning of the list. You can scroll to see previous measured
times. When you press Stop, the total time appears at the top.
Save the time
1. While the clock is running, select Stop > Options > Save.
2. Enter a name for the measurement, and press OK.
If you do not enter a name, the total time is used as the default title for the
lap time.
Operation note
If you press the End key and return to the standby mode, the clock continues to run
in the background and the
icon appears in the upper left corner of the screen.
To return to the stopwatch screens:
1. In the standby mode, select Menu > Organizer > Stopwatch >Continue.
2. To stop the clock, press Stop.
87
Copyright © 2005 Nokia
Options
You can choose the following options when using the stopwatch:
Continue—Shows up when the stopwatch is working in the background.
Show last time—Allows you to view the last measured time.
View times—Allows you to browse the saved times.
Delete times—Allows you to delete any saved times. You can delete the saved
times one by one or all at once.
88
Copyright © 2005 Nokia
Mobile Web (Menu 9)
12. Mobile Web (Menu 9)
Mobile Web 2.0 is a digital network service and is not available everywhere.
Mobile Web text messages and alerts fees apply for messages both sent and
received. Airtime charges apply. See "Network Services," p. 6 for more information.
Your phone has a built-in browser you can use to connect to selected services on
the mobile Web. If your wireless service provider supports this feature, then you
can view weather reports, check news or flight times, view financial information,
and much more.
Your device may have some bookmarks loaded for sites not affiliated with Nokia.
Nokia does not warrant or endorse these sites. If you choose to access them, you
should take the same precautions, for security or content, as you would with any
internet site.
The security icon does not indicate that the data transmission between the gateway
and the content server (or place where the requested resource is stored) is secure.
The service provider secures the data transmission between the gateway and the
content server.
■ Mobile web access
Because mobile web content is designed to be viewed from your phone, your
wireless provider is now your mobile web service provider as well.
It is likely that your wireless provider has created a home page and set up your
browser to go to this page when you log on to the mobile web. Once at your
service provider’s home page, you may find links to a number of other sites.
It should not be necessary to manually configure the browser on your phone.
Normally this is done by your wireless provider once you have subscribed to the
feature. Contact your wireless provider if you have problems using the browser.
■ Sign on to the Mobile web
In the standby mode, select Menu > Mobile Web. Press the Scroll up key for
quick access.
After a brief pause, your phone attempts to connect to your wireless provider’s
home page. If you receive an error message, your phone may not be set up for
browsing. Contact your wireless provider to make sure that your phone is
configured properly.
89
Copyright © 2005 Nokia
■ Navigate the mobile web
Since your phone screen is much smaller than a computer screen, mobile web
content is displayed differently than you may be accustomed to seeing. This section
contains guidelines for using phone keys to navigate a site.
Phone keys
•
•
•
•
•
To display the Mobile web home screen, press the Power key.
To browse the site, press the Scroll up or Scroll down key.
To select a highlighted item, press Select.
To enter letters and numbers, press a key from 0–9.
To enter special characters, press the * key.
Receive a call while online
Depending on your wireless service provider, you may still be able to receive a
voice call while using the browser.
•
•
To answer the incoming call, press the Send key.
To reject the incoming call, press the End key.
After you end your voice call, the mobile web connection automatically resumes.
Note: If your wireless service provider does not support incoming calls
while browsing, then the incoming calls are automatically forwarded to
voice mail.
Make an emergency call while online
You can end your data connection and then make an emergency call.
1. To close your mobile web connection, simply press the End key.
2. Press the End key as many times as needed to clear the display and ready the
phone for calls.
3. Enter the emergency number for your present location (for example, 911).
Emergency numbers vary by location.
4. Press the Send key.
90
Copyright © 2005 Nokia
Mobile Web (Menu 9)
Clear the cache and disconnect
A cache is a memory location that is used to store data temporarily. If you have
tried to access or have accessed confidential information requiring passwords,
empty the cache after each use. The information or services you have accessed is
stored in the cache. To empty the cache while in the browser menu, select
Navigate > Advanced > Clear > Cache from the home page. You can also clear
the cache by pressing and holding the Power key to power off your phone.
To close your mobile Web connection while browsing, press and hold the End key.
91
Copyright © 2005 Nokia
13. Connectivity (Menu 10)
You can connect the phone to a compatible device using an IR or Bluetooth
connection. You can also connect the phone to a compatible PC using IR or
Bluetooth; and use the phone as a modem to enable connectivity from the PC.
For vehicle and accessory compatibility to Bluetooth, check the Verizon Wireless
■ Bluetooth connectivity
Bluetooth connectivity enables cost-free wireless connections between
electronic devices within a maximum range of 30 feet. A Bluetooth connection
can be used to send and receive images, texts, voice recordings, video clips, notes,
business cards, and calendar notes. It can also be used to connect wirelessly to
products that use Bluetooth wireless technology, such as computers, Bluetooth
carkits, and Bluetooth headsets. You can synchronize your phone and your PC
using a Bluetooth connection.
Since devices with Bluetooth connectivity communicate using radio waves, your
phone and the other device do not need to be in direct line-of-sight.
The two devices only need to be within a maximum of 30 feet (10 meters) of each
other, although the connection can be subject to interference from obstructions
such as walls or from other electronic devices.
The Bluetooth application consumes the battery and reduces the operating
time of the phone. Take this into account when performing other operations
with your phone.
There may be restrictions on using devices with Bluetooth connectivity. Check
with your local authorities.
These devices are compliant with Bluetooth specification 1.1 supporting the
following profiles:
•
•
•
•
•
•
Object push profile (OPP)
File transfer profile (FTP)
Dial-up networking profile (DUN)
Generic object exchange profile (GOEP)
Headset profile (HSP)
Hands-free profile (HFP)
92
Copyright © 2005 Nokia
Connectivity (Menu 10)
•
•
Generic access profile (GAP)
Serial port profile (SPP)
To ensure inter operability between other devices supporting Bluetooth technology,
use Nokia approved enhancements for this model. Check with the manufacturers
of other devices to determine their compatibility with this device.
There may be restrictions on using Bluetooth technology in some locations.
Check with your local authorities or service provider.
Features using Bluetooth technology, or allowing such features to run in the
background while using other features, increase the demand on battery power
and reduces the battery life.
Pairing
You can set up a permanent association (pairing) between your phone and
another device with Bluetooth connectivity. Some devices may require pairing
before data transfer can take place.
To pair with a device, you and the owner of the other device must agree on a
passcode of 1–16 numeric characters. The first time you try to connect the
devices, you must each enter the same passcode. The default passcode is 0000.
Once the devices are paired, you will not need to use the passcode again, so there
is no need to remember it.
Paired devices are placed in your paired device list. You can view the list even
when Bluetooth is not active or when the devices in the list are not available
for connection.
To view the paired device list:
1. In the standby mode, select Menu > Connectivity > Bluetooth > Paired devices.
2. Scroll to the desired device, and select Options and one of the following
Assign short name—Give a nickname to the selected device (visible to you only).
Request conn. authorization—Select No if you want the phone to connect to
the selected device automatically or Yes if you want the phone to ask for your
permission first.
Delete pairing—Delete the pairing to the selected device.
Pair new device—Search for active devices with Bluetooth connectivity within
range, scroll to the desired device, and select Pair to establish pairing with
that device.
93
Copyright © 2005 Nokia
Settings
You can define how your phone is shown to other devices with Bluetooth connectivity.
In the standby mode, select Menu > Settings > Connectivity > Bluetooth >
Bluetooth settings and one of the following:
My phone's visibility—SelectShown toall to show the phone to all other devices with
Bluetooth connectivity or Hidden to show the phone only to the paired devices.
My phone's name—Change your phone name that is seen by other users.
Set up a Bluetooth connection
1. In the standby mode, select Menu > Settings > Connectivity > Bluetooth.
2. Select Bluetooth > On. The active Bluetooth connection is indicated by
at the top of the display.
3. Select Search for audio enhancements to search for compatible devices with
Bluetooth connectivity.
The list of found devices appears in the display.
4. Select the desired device.
5. If required, enter the Bluetooth passcode of the device to pair with the device.
Your phone connects to the device. You can start data transfer.
6. To view the device you are connected to, select Active device.
7. To deactivate Bluetooth, select Bluetooth > Off.
■ Infrared
You can set up the phone to receive data through its IR port. To use an IR
connection, transmission and reception must be to or from an IR compatible
phone or device.
Do not point the IR (infrared) beam at anyone’s eye or allow it to interfere with
other IR devices. This device is a Class 1 laser product.
Send and receive data
1. Ensure that the IR ports of the sending and receiving devices are pointing at
each other and that there are no obstructions between the devices.
The preferable distance between the two devices in an IR connection is from
3 inches to 3 feet.
94
Copyright © 2005 Nokia
Connectivity (Menu 10)
2. Activate IR in your phone by selecting Menu > Settings > Connectivity > Infrared.
3. The user of the other device should activate IR as well.
If data transfer is not started within two minutes after the activation of the IR
port, the connection is cancelled and must be restarted.
Connection indicator
•
When
phone is ready to send or receive data using its IR port.
When blinks, your phone is trying to connect to the other device or a
connection has been lost.
is shown continuously, the IR connection is activated and your
•
95
Copyright © 2005 Nokia
14. Get it now (Menu 11)
Get It Now services allow you to communicate with advanced Messaging
and Chat capabilities; get News and Info with online access; download
Fun and Games software; and share images with Flix and Pix.
Get It Now services.
Note: Your phone must be switched on to use this function. Do not
switch the phone on when wireless phone use is prohibited or when it
may cause interference or danger.
Note: Get it now is a network dependent feature and will not be available
in all phones. Please check with your service provider for more information.
Note: This feature shares memory space with other features. For more
information, see "Shared memory," p. 7.
■ Launching an application
1. In the standby mode, select Menu > Get It Now > Select.
2. Select Start.
If the selection is a single application, it will launch. Otherwise, a list of
applications is displayed corresponding to the selected application set.
3. Scroll to the desired application and press Select to launch the application.
■ Download a new application
1. In the standby mode, select Menu > Get It Now > Select.
2. At the next screen, select OK.
3. Select Content to download > Select.
Note: Nokia does not provide any warranty for non Nokia applications.
If you choose to download and install an application, you should take
the same precautions for security or content as you would with any
internet site.
96
Copyright © 2005 Nokia
Get it now (Menu 11)
■ Remove an application
1. In the standby mode, select Menu > Get It Now > Select.
2. Scroll to Options and press Select.
3. Scroll to the application you wish to remove and press Select.
4. Scroll to Remove and press Select.
Note: The screen will display a question asking if you are sure you
want to completely remove the application. Select Yes.
■ Check memory status
Allows you to view memory available for Applications.
1. In the standby mode, select Menu > Get It Now > Get It Now >
Options > Information.
2. The amount of Free memory and the Total memory is displayed. This varies
according to the number of applications installed.
■ Other options available for applications
•
Delete—delete the application or application set from the phone.
•
Check version—check if a new version of the application is available for
download from the mobile web services.
•
Details—give additional information about the application.
Note: Check version and Internet link may not be available for
all applications.
97
Copyright © 2005 Nokia
15. Extras (Menu 12)
■ Collection
1. In the standby mode, select Menu > Extras > Collection.
2. Scroll to an application and press Select.
Converter II—Allows you to convert currency, weight, length, area,
and volume.
Translator—Allows you to search for the translation of words in
several languages.
World Clock II—Allows you to enter your time and find the time in
other cities.
Note: An application may require a few seconds to load. When you open
an application, wait for the launch screen to disappear. At that point, the
application is ready.
98
Copyright © 2005 Nokia
Enhancements
16. Enhancements
Check the model number of any charger before use with this
device. This device is intended for use when supplied with
power from ACP-7 or ACP-12.
Warning: Use only batteries, chargers and enhancements approved by
Nokia for use with this particular model. The use of any other types may
invalidate any approval or warranty, and may be dangerous. For availability
of approved enhancements, please check with your dealer.
Your device and its enhancements may contain small parts. Keep them out of
reach of small children.
A few practical rules about accessories and enhancements:
•
•
Keep all accessories and enhancements out of the reach of small children.
When you disconnect the power cord of any accessory or enhancement, grasp
and pull the plug, not the cord.
•
•
Check regularly that enhancements installed in a vehicle are mounted and
are operating properly.
Installation of any complex car enhancements must be made by qualified
personnel only.
Power
•
•
•
•
Standard 1070 mAh Li-Ion Battery (BL-6C)
Standard Travel Charger (ACP-7)
Travel Charger (ACP-12)
Retractable Charger (AC-1)
99
Copyright © 2005 Nokia
17. Reference information
This section provides information about your phone’s batteries, enhancements,
chargers, safety guidelines and technical information. Be aware that the
information in this section is subject to change as batteries, chargers, and
enhancements change.
■ Battery information
Your device is powered by a rechargeable battery. The full performance of a new
battery is achieved only after two or three complete charge and discharge cycles.
The battery can be charged and discharged hundreds of times but it will eventually
wear out. When the talk and standby times are noticeably shorter than normal,
buy a new battery. Use only Nokia approved batteries, and recharge your battery
only with Nokia approved chargers designated for this device.
Unplug the charger from the electrical plug and the device when not in use.
Do not leave the battery connected to a charger. Overcharging may shorten its
lifetime. If left unused, a fully charged battery will lose its charge over time.
Temperature extremes can affect the ability of your battery to charge.
Use the battery only for its intended purpose. Never use any charger or battery
that is damaged.
Do not short-circuit the battery. Accidental short-circuiting can occur when a
metallic object such as a coin, clip, or pen causes direct connection of the positive
(+) and negative (-) terminals of the battery. (These look like metal strips on the
battery.) This might happen, for example, when you carry a spare battery in your
pocket or purse. Short-circuiting the terminals may damage the battery or the
connecting object.
Leaving the battery in hot or cold places, such as in a closed car in summer or
winter conditions, will reduce the capacity and lifetime of the battery. Always try
to keep the battery between 59°F and 77°F (15°C and 25°C). A device with a hot
or cold battery may not work temporarily, even when the battery is fully charged.
Battery performance is particularly limited in temperatures well below freezing.
Do not dispose of batteries in a fire! Dispose of batteries according to local
regulations. Please recycle when possible. Do not dispose as household waste.
100
Copyright © 2005 Nokia
Care and maintenance
Care and maintenance
Your device is a product of superior design and craftsmanship and should be treated
with care. The suggestions below will help you protect your warranty coverage.
•
Keep the device dry. Precipitation, humidity and all types of liquids or
moisture can contain minerals that will corrode electronic circuits. If your
device does get wet, remove the battery and allow the device to dry
completely before replacing it.
•
•
•
Do not use or store the device in dusty, dirty areas. Its moving parts and
electronic components can be damaged.
Do not store the device in hot areas. High temperatures can shorten the life of
electronic devices, damage batteries, and warp or melt certain plastics.
Do not store the device in cold areas. When the device returns to its normal
temperature, moisture can form inside the device and damage electronic
circuit boards.
•
•
Do not attempt to open the device other than as instructed in this guide.
Do not drop, knock, or shake the device. Rough handling can break internal
circuit boards and fine mechanics.
•
•
•
•
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean
the device.
Do not paint the device. Paint can clog the moving parts and prevent
proper operation.
Use a soft, clean, dry cloth to clean any lenses (such as camera, proximity
sensor, and light sensor lenses).
Use only the supplied or an approved replacement antenna. Unauthorized
antennas, modifications, or attachments could damage the device and may
violate regulations governing radio devices.
All of the above suggestions apply equally to your device, battery, charger, or
any enhancement. If any device is not working properly, take it to the nearest
authorized service facility for service.
101
Copyright © 2005 Nokia
Additional safety information
■ Operating environment
Remember to follow any special regulations in force in any area and always switch
off your device when its use is prohibited or when it may cause interference or
danger. Use the device only in its normal operating positions. This device meets RF
exposure guidelines when used either in the normal use position against the ear of
when positioned at least 7/8 inch (2.2 cm) away from the body. When a carry case,
belt clip, or holder is used for body-worn operation, it should not contain metal and
should position the device at least 7/8 inch (2.2 cm) away from your body.
In order to transmit data files or messages, this device requires a quality connection
to the network. In some cases, transmission of data files or messages may be
delayed until such a connection is available. Ensure the above separation
distance instructions are followed until the transmission is completed.
■ Medical devices
Operation of any radio transmitting equipment, including wireless phones, may
interfere with the functionality of inadequately protected medical devices.
Consult a physician or the manufacturer of the medical device to determine if
they are adequately shielded from external RF energy or if you have any questions.
Switch off your device in health care facilities when any regulations posted in
these areas instruct you to do so. Hospitals or health care facilities may be using
equipment that could be sensitive to external RF energy.
PACEMAKERS
Pacemaker manufacturers recommend that a minimum separation of 6 in (15.3 cm)
be maintained between a wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations are consistent with the
independent research by and recommendations of Wireless Technology Research.
To minimize the potential for interference, persons with pacemakers should
•
Always keep the device more than 6 inches (15.3 cm) from their pacemaker
when the device is switched on
•
•
Not carry the device in a breast pocket
Hold the device to the ear opposite the pacemaker to minimize the potential
for interference.
If you have any reason to suspect that interference is taking place, switch off
your device immediately.
102
Copyright © 2005 Nokia
Additional safety information
HEARING AIDs
Some digital wireless devices may interfere with some hearing aids. If interference
occurs, consult your service provider.
■ Vehicles
RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles such as electronic fuel injection systems, electronic
antiskid (antilock) braking systems, electronic speed control systems, air bag
systems. For more information, check with the manufacturer or its representative
of your vehicle or any equipment that has been added.
Only qualified personnel should service the device, or install the device in a
vehicle. Faulty installation or service may be dangerous and may invalidate any
warranty that may apply to the device. Check regularly that all wireless device
equipment in your vehicle is mounted and operating properly. Do not store or
carry flammable liquids, gases, or explosive materials in the same compartment
as the device, its parts, or enhancements. For vehicles equipped with an air bag,
remember that an air bags inflate with great force. Do not place objects, including
installed or portable wireless equipment in the area over the air bag or in the air
bag deployment area. If in-vehicle wireless equipment is improperly installed and
the air bag inflates, serious injury could result.
■ Potentially explosive environments
Switch off your device when in any area with a potentially explosive atmosphere
and obey all signs and instructions. Potentially explosive atmospheres include
areas where you would normally be advised to turn off your vehicle engine.
Sparks in such areas could cause an explosion or fire resulting in bodily injury or
even death. Switch off the device at refuelling points such as near gas pumps at
service stations. Observe restrictions on the use of radio equipment in fuel depots,
storage, and distribution areas, chemical plants or where blasting operations are
in progress. Areas with a potentially explosive atmosphere are often but not
always clearly marked. They include below deck on boats, chemical transfer or
storage facilities, vehicles using liquefied petroleum gas (such as propane or
butane), and areas where the air contains chemicals or particles such as grain,
dust or metal powders.
FCC regulations prohibit using your wireless device while in the air. The use of
wireless telephones in an aircraft may be dangerous to the operation of the
aircraft, disrupt the wireless telephone network, and may be illegal.
Failure to observe these instructions may lead to suspension or denial of telephone
services to the offender, legal action, or both.
103
Copyright © 2005 Nokia
■ Emergency calls
Important: Wireless phones, including this phone, operate using radio
signals, wireless networks, landline networks, and user-programmed
functions. Because of this, connections in all conditions cannot be
guaranteed. You should never rely solely on any wireless phone for
essential communications like medical emergencies.
To make an emergency call:
1. If the device is not on, switch it on. Check for adequate signal strength.
2. Press the End key as many times as needed to clear the display and ready the
device for calls.
3. Key in the official emergency number for your present location. Emergency
numbers vary by location.
4. Press the Send key.
If certain features are in use, you may first need to turn those features off before
you can make an emergency call. If the device is in an offline or flight mode you
must change the profile to activate the phone function before you can make an
emergency call. Consult this guide or your service provider. When making an
emergency call, give all the necessary information as accurately as possible. Your
wireless device may be the only means of communication at the scene of an
accident. Do not end the call until given permission to do so.
■ Certification Information (SAR)
THIS MODEL PHONE MEETS THE GOVERNMENT'S REQUIREMENTS FOR
EXPOSURE TO RADIO WAVES.
Your mobile device is a radio transmitter and receiver. It is designed and
manufactured not to exceed the limits for exposure to radio frequency (RF) energy
adopted by the governments of the USA through the Federal Communications
Commission (FCC) and Canada through Industry Canada (IC). These limits establish
permitted levels of RF energy for the general population. The guidelines are based
on standards that were developed by independent scientific organizations through
periodic and thorough evaluation of scientific studies. The standards include a
substantial safety margin designed to assure the safety of all persons, regardless
of age and health.
The exposure guidelines for mobile devices employ a unit of measurement known
as the Specific Absorption Rate or SAR. The SAR limit adopted by the USA and
Canada is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The limit
incorporates a substantial margin of safety to give additional protection for the
public to account for any variations in measurements. Tests for SAR are conducted
104
Copyright © 2005 Nokia
Additional safety information
using standard operating positions with the device transmitting at its highest
certified power level in all tested frequency bands. The actual SAR level of an
operating device can be well below the maximum value because the device is
designed to use only the power required to reach the network. That amount
changes depending on a number of factors such as how close you are to a
network base station.
The highest SAR value reported to the FCC and IC for this device type when tested
for use at the ear is 1.30 W/kg, and when properly work on the body is 0.79 W/kg.
SAR information on file with the FCC can be found under the Display Grant
section of http://www.fcc.gov/oet/fccid after searching on FCC ID QMNRM-19.
SAR values reported in other countries may vary depending on differences in
reporting and testing requirements and the network band. Additional SAR
information may be provided under product information at www.nokia.com.
This device model complies with the requirements of the FCC rules governing
hearing aid compatibility. Device models meeting these requirements have an
M3 microphone or higher rating. The M-rating, shown on the device, refers to
lower RF emissions levels. A higher M-rating generally indicates that a device
model has a lower RF emissions level which may improve the likelihood that the
device will successfully operate with certain hearing aids. Some hearing aids are
more immune than others to interference. Please consult your hearing health
professional to determine the M-rating of your hearing aid and whether your
hearing aid will work with this device. More information can be found at
www.nokiaaccessibility.com/.
105
Copyright © 2005 Nokia
■ Technical information
Feature
Specification
Feature
Specification
Dimensions Width: 1.86 in (47.4 mm) Frequency
Length: 3.44 in (87.3 mm) range (Tx)
Depth: 1 in (27 mm)
AMPS: 824.04–848.97
PCS: 1851.25–1908.75 MHz
Cellular: 824.70–848.37 MHz
Weight
4.40 oz (126 g)
Frequency
AMPS: 869.04–893.97
with BL-6C Li-Ion Battery range (Rx)
PCS: 1931.25–1988.75 MHz
Cellular: 869.70–893.37 MHz
Wireless
networks
CDMA 800 and 1900
AMPS 800
GPS frequency 1575.42 MHz
Bluetooth
Volume
104 cc
■ Battery information
This section provides information about battery charging times with the Travel
Charger (ACP-12) and the Standard Travel Charger (ACP-7), talk-times, and
standby times. Be aware that the information in this section is subject to change.
For more information, contact your service provider.
Charging times
The following charging times are approximate with the
BL-6C 1070 mAh Li-Ion battery:
Travel Charger (ACP-12): 1 hour 35 minutes
Standard Travel Charger (ACP-7): 3 hours 45 minutes
Talk and standby times
Operation times are estimates only and depend on signal strength, phone use,
network conditions, features used, battery age and condition (including charging
habits), temperatures to which the battery is exposed, and many other factors.
Talk time: 3.25 hours
Standby time: 11 days
Note: Talk time and standby times may vary among service providers.
Check with your service provider for more information.
106
Copyright © 2005 Nokia
Additional safety information
■ Nokia One-Year Limited Warranty
Nokia Inc. (“Nokia”) warrants that this cellular phone (“Product”) is free from defects
in material and workmanship that result in Product failure during normal usage,
according to the following terms and conditions:
1. The limited warranty for the Product extends for ONE (1) year beginning on
the date of the purchase of the Product. This one year period is extended by
each whole day that the Product is out of your possession for repair under
this warranty.
2. The limited warranty extends only to the original purchaser (“Consumer”) of the
Product and is not assignable or transferable to any subsequent purchaser/
end-user.
3. The limited warranty extends only to Consumers who purchase the Product in
the United States of America.
4. During the limited warranty period, Nokia will repair, or replace, at Nokia’s sole
option, any defective parts, or any parts that will not properly operate for their
intended use with new or refurbished replacement items if such repair or
replacement is needed because of product malfunction or failure during
normal usage. No charge will be made to the Consumer for any such parts.
Nokia will also pay for the labor charges incurred by Nokia in repairing or
replacing the defective parts. The limited warranty does not cover defects in
appearance, cosmetic, decorative or structural items, including framing, and
any non-operative parts. Nokia’s limit of liability under the limited warranty
shall be the actual cash value of the Product at the time the Consumer returns
the Product for repair, determined by the price paid by the Consumer for the
Product less a reasonable amount for usage. Nokia shall not be liable for any
other losses or damages. These remedies are the Consumer’s exclusive remedies
for breach of warranty.
5. Upon request from Nokia, the Consumer must prove the date of the original
purchase of the Product by a dated bill of sale or dated itemized receipt.
6. The Consumer shall bear the cost of shipping the Product to Nokia. Nokia shall
bear the cost of shipping the Product back to the Consumer after the completion
of service under this limited warranty.
7. The Consumer shall have no coverage or benefits under this limited warranty
if any of the following conditions are applicable:
107
Copyright © 2005 Nokia
a) The Product has been subjected to abnormal use, abnormal conditions,
improper storage, exposure to moisture or dampness, unauthorized
modifications, unauthorized connections, unauthorized repair, misuse,
neglect, abuse, accident, alteration, improper installation, or other acts
which are not the fault of Nokia, including damage caused by shipping.
b) The Product has been damaged from external causes such as collision with
an object, or from fire, flooding, sand, dirt, windstorm, lightning, earthquake
or damage from exposure to weather conditions, an Act of God, or battery
leakage, theft, blown fuse, or improper use of any electrical source, damage
caused by computer or internet viruses, bugs, worms, Trojan Horses,
cancelbots or damage caused by the connection to other products not
recommended for interconnection by Nokia.
c) Nokia was not advised in writing by the Consumer of the alleged defect or
malfunction of the Product within fourteen (14) days after the expiration
of the applicable limited warranty period.
d) The Product serial number plate or the enhancement data code has been
removed, defaced or altered.
e) The defect or damage was caused by the defective function of the cellular
system or by inadequate signal reception by the external antenna, or
viruses or other software problems introduced into the Product.
8. Nokia does not warrant uninterrupted or error-free operation of the Product.
If a problem develops during the limited warranty period, the Consumer shall
take the following step-by-step procedure:
a) The Consumer shall return the Product to the place of purchase for repair
or replacement processing.
b) If “a” is not convenient because of distance (more than 50 miles) or for
other good cause, the Consumer shall ship the Product prepaid and
repair center nearest you.
c) The Consumer shall include a return address, daytime phone number and/
or fax number, complete description of the problem, proof of purchase
and service agreement (if applicable). Expenses related to removing the
Product from an installation are not covered under this limited warranty.
d) The Consumer will be billed for any parts or labor charges not covered by
this limited warranty. The Consumer will be responsible for any expenses
related to reinstallation of the Product.
108
Copyright © 2005 Nokia
Additional safety information
e) Nokia will repair the Product under the limited warranty within 30 days
after receipt of the Product. If Nokia cannot perform repairs covered under
this limited warranty within 30 days, or after a reasonable number of
attempts to repair the same defect, Nokia at its option, will provide a
replacement Product or refund the purchase price of the Product less a
reasonable amount for usage. In some states the Consumer may have the
right to a loaner if the repair of the Product takes more than ten (10) days.
Please contact the Customer Service Center at Nokia at the telephone
number listed at the end of this warranty if you need a loaner and the repair
of the Product has taken or is estimated to take more than ten (10) days.
f) If the Product is returned during the limited warranty period, but the problem
with the Product is not covered under the terms and conditions of this
limited warranty, the Consumer will be notified and given an estimate of
the charges the Consumer must pay to have the Product repaired, with all
shipping charges billed to the Consumer. If the estimate is refused, the
Product will be returned freight collect. If the Product is returned after the
expiration of the limited warranty period, Nokia’s normal service policies
shall apply and the Consumer will be responsible for all shipping charges.
9. You (the Consumer) understand that the product may consist of refurbished
equipment that contains used components, some of which have been
reprocessed. The used components comply with Product performance and
reliability specifications.
10. ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR
PURPOSE OR USE, SHALL BE LIMITED TO THE DURATION OF THE FOREGOING
LIMITED WRITTEN WARRANTY. OTHERWISE, THE FOREGOING LIMITED
WARRANTY IS THE CONSUMER’S SOLE AND EXCLUSIVE REMEDY AND IS IN
LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. NOKIA SHALL NOT
BE LIABLE FOR SPECIAL, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES,
INCLUDING BUT NOT LIMITED TO LOSS OF ANTICIPATED BENEFITS OR PROFITS,
LOSS OF SAVINGS OR REVENUE, LOSS OF DATA, PUNITIVE DAMAGES, LOSS OF
USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL,
COST OF ANY SUBSTITUTE EQUIPMENT OR FACILITIES, DOWNTIME, THE CLAIMS
OF ANY THIRD PARTIES, INCLUDING CUSTOMERS, AND INJURY TO PROPERTY,
RESULTING FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM
BREACH OF THE WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT
TORT, OR ANY OTHER LEGAL OR EQUITABLE THEORY, EVEN IF NOKIA KNEW
OF THE LIKELIHOOD OF SUCH DAMAGES. NOKIA SHALL NOT BE LIABLE FOR
DELAY IN RENDERING SERVICE UNDER THE LIMITED WARRANTY, OR LOSS OF
USE DURING THE PERIOD THAT THE PRODUCT IS BEING REPAIRED.
109
Copyright © 2005 Nokia
11. Some states do not allow limitation of how long an implied warranty lasts, so the
one year warranty limitation may not apply to you (the Consumer). Some states
do not allow the exclusion or limitation of incidental and consequential damages,
so certain of the above limitations or exclusions may not apply to you (the
Consumer). This limited warranty gives the Consumer specific legal rights and
the Consumer may also have other rights which vary from state to state.
12. Nokia neither assumes nor authorizes any authorized service center or any
other person or entity to assume for it any other obligation or liability beyond
that which is expressly provided for in this limited warranty including the
provider or seller of any extended warranty or service agreement.
13. This is the entire warranty between Nokia and the Consumer, and supersedes
all prior and contemporaneous agreements or understandings, oral or written,
relating to the Product, and no representation, promise or condition not
contained herein shall modify these terms.
14. This limited warranty allocates the risk of failure of the Product between the
Consumer and Nokia. The allocation is recognized by the Consumer and is
reflected in the purchase price.
15. Any action or lawsuit for breach of warranty must be commenced within
eighteen (18) months following purchase of the Product.
16. Questions concerning this limited warranty may be directed to:
Nokia Inc.
Telephone: 1-888-NOKIA-2U (1-888-665-4228)
Facsimile: (813) 249-9619
TTY/TDD Users Only: 1-800-24-NOKIA (1-800-246-6542)
Website: www.nokiausa.com/support
110
Copyright © 2005 Nokia
■ Appendix A Message from the CTIA
(Cellular Telecommunications & Internet Association)
to all users of mobile phones
© 2001 Cellular Telecommunications & Internet Association. All Rights Reserved.
1250 Connecticut Avenue, NW Suite 800, Washington, DC 20036.
Phone: (202) 785-0081
Safety is the most important call you will ever make.
A Guide to Safe and Responsible Wireless Phone Use
Tens of millions of people in the U.S. today take advantage of the unique combination
of convenience, safety and value delivered by the wireless telephone. Quite simply,
the wireless phone gives people the powerful ability to communicate by voice—
almost anywhere, anytime—with the boss, with a client, with the kids, with
emergency personnel or even with the police. Each year, Americans make billions
of calls from their wireless phones, and the numbers are rapidly growing. But an
important responsibility accompanies those benefits, one that every wireless
phone user must uphold. When driving a car, driving is your first responsibility. A
wireless phone can be an invaluable tool, but good judgment must be exercised
at all times while driving a motor vehicle—whether on the phone or not.The basic
lessons are ones we all learned as teenagers. Driving requires alertness, caution
and courtesy. It requires a heavy dose of basic common sense—keep your head
up, keep your eyes on the road, check your mirrors frequently and watch out for
other drivers. It requires obeying all traffic signs and signals and staying within
the speed limit. It means using seatbelts and requiring other passengers to do the
same. But with wireless phone use, driving safely means a little more. This brochure
is a call to wireless phone users everywhere to make safety their first priority
when behind the wheel of a car. Wireless telecommunications is keeping us in touch,
simplifying our lives, protecting us in emergencies and providing opportunities to
help others in need. When it comes to the use of wireless phones, safety is your
most important call.
Wireless Phone Safety Tips
Below are safety tips to follow while driving and using a wireless phone which
should be easy to remember.
1. Get to know your wireless phone and its features such as speed dial and
redial. Carefully read your instruction manual and learn to take advantage of
valuable features most phones offer, including automatic redial and memory.
Also, work to memorize the phone keypad so you can use the speed dial
function without taking your attention off the road.
111
Copyright © 2005 Nokia
2. When available, use a hands-free device. A number of hands-free wireless phone
accessories are readily available today. Whether you choose an installed
mounted device for your wireless phone or a speaker phone accessory, take
advantage of these devices if available to you.
3. Position your wireless phone within easy reach. Make sure you place your
wireless phone within easy reach and where you can grab it without removing
your eyes from the road. If you get an incoming call at an inconvenient time,
if possible, let your voice mail answer it for you.
4. Suspend conversations during hazardous driving conditions or situations. Let
the person you are speaking with know you are driving; if necessary, suspend
the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow
and ice can be hazardous, but so is heavy traffic. As a driver, your first
responsibility is to pay attention to the road.
5. Do not take notes or look up phone numbers while driving. If you are reading
an address book or business card, or writing a "to do" list while driving a car,
you are not watching where you are going. It’s common sense. Don’t get
caught in a dangerous situation because you are reading or writing and not
paying attention to the road or nearby vehicles.
6. Dial sensibly and assess the traffic; if possible, place calls when you are not
moving or before pulling into traffic. Try to plan your calls before you begin
your trip or attempt to coincide your calls with times you may be stopped at a
stop sign, red light or otherwise stationary. But if you need to dial while
driving, follow this simple tip—dial only a few numbers, check the road and
your mirrors, then continue.
7. Do not engage in stressful or emotional conversations that may be distracting.
Stressful or emotional conversations and driving do not mix—they are distracting
and even dangerous when you are behind the wheel of a car. Make people you
are talking with aware you are driving and if necessary, suspend conversations
which have the potential to divert your attention from the road.
8. Use your wireless phone to call for help. Your wireless phone is one of the
greatest tools you can own to protect yourself and your family in dangerous
situations—with your phone at your side, help is only three numbers away.
Dial 9-1-1 or other local emergency number in the case of fire, traffic
accident, road hazard or medical emergency. Remember, it is a free call on
your wireless phone!
9. Use your wireless phone to help others in emergencies. Your wireless phone
provides you a perfect opportunity to be a "Good Samaritan" in your community.
If you see an auto accident, crime in progress or other serious emergency where
lives are in danger, call 9-1-1 or other local emergency number, as you would
want others to do for you.
112
Copyright © 2005 Nokia
10. Call roadside assistance or a special wireless nonemergency assistance number
when necessary. Certain situations you encounter while driving may require
attention, but are not urgent enough to merit a call for emergency services.
But you still can use your wireless phone to lend a hand. If you see a broken-
down vehicle posing no serious hazard, a broken traffic signal, a minor traffic
accident where no one appears injured or a vehicle you know to be stolen, call
roadside assistance or other special non-emergency wireless number.
Careless, distracted individuals and people driving irresponsibly represent a hazard
to everyone on the road. Since 1984, the Cellular Telecommunications Industry
Association and the wireless industry have conducted educational outreach to
inform wireless phone users of their responsibilities as safe drivers and good citizens.
As we approach a new century, more and more of us will take advantage of the
benefits of wireless telephones. And, as we take to the roads, we all have a
responsibility to drive safely.
The wireless industry reminds you to use your phone safely when driving.
For more information, please call 1-888-901-SAFE.
For updates:
http://www.wow-com.com/consumer/issues/driving/articles.cfm?ID=85
113
Copyright © 2005 Nokia
■ Appendix B Message from the FDA
(U.S. Food and Drug Administration)
to all users of mobile phones.
©July 18, 2001 For updates: http://www.fda.gov/cdrh/phones
Consumer Update on Wireless Phones
U.S. Food and Drug Administration
1. Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health problems are
associated with using wireless phones. There is no proof, however, that wireless
phones are absolutely safe. Wireless phones emit low levels of radiofrequency
energy (RF) in the microwave range while being used. They also emit very low
levels of RF when in the stand-by mode. Whereas high levels of RF can produce
health effects (by heating tissue), exposure to low level RF that does not produce
heating effects causes no known adverse health effects. Many studies of low
level RF exposures have not found any biological effects. Some studies have
suggested that some biological effects may occur, but such findings have not
been confirmed by additional research. In some cases, other researchers have
had difficulty in reproducing those studies, or in determining the reasons for
inconsistent results.
2. What is FDA's role concerning the safety of wireless phones?
Under the law, FDA does not review the safety of radiation-emitting consumer
products such as wireless phones before they can be sold, as it does with new
drugs or medical devices. However, the agency has authority to take action if
wireless phones are shown to emit radio frequency energy (RF) at a level that
is hazardous to the user. In such a case, FDA could require the manufacturers
of wireless phones to notify users of the health hazard and to repair, replace
or recall the phones so that the hazard no longer exists.
Although the existing scientific data do not justify FDA regulatory actions, FDA
has urged the wireless phone industry to take a number of steps, including
the following:
•
•
•
Support needed research into possible biological effects of RF of the type
emitted by wireless phones;
Design wireless phones in a way that minimizes any RF exposure to the
user that is not necessary for device function; and
Cooperate in providing users of wireless phones with the best possible
information on possible effects of wireless phone use on human health.
114
Copyright © 2005 Nokia
FDA belongs to an interagency working group of the federal agencies that have
responsibility for different aspects of RF safety to ensure coordinated efforts at
the federal level. The following agencies belong to this working group:
•
•
•
•
•
National Institute for Occupational Safety and Health
Environmental Protection Agency
Federal Communications Commission
Occupational Safety and Health Administration
National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency working
group activities, as well.
FDA shares regulatory responsibilities for wireless phones with the Federal
Communications Commission (FCC). All phones that are sold in the United
States must comply with FCC safety guidelines that limit RF exposure. FCC
relies on FDA and other health agencies for safety questions about wireless
phones. FCC also regulates the base stations that the wireless phone networks
rely upon. While these base stations operate at higher power than do the
wireless phones themselves, the RF exposures that people get from these
base stations are typically thousands of times lower than those they can get
from wireless phones. Base stations are thus not the subject of the safety
questions discussed in this document.
3. What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless phones with built-in
antennas, often called cell mobile or PCS phones. These types of wireless phones
can expose the user to measurable radio frequency energy (RF) because of the
short distance between the phone and the user’s head. These RF exposures
are limited by Federal Communications Commission safety guidelines that
were developed with the advice of FDA and other federal health and safety
agencies. When the phone is located at greater distances from the user, the
exposure to RF is drastically lower because a person's RF exposure decreases
rapidly with increasing distance from the source. The so-called cordless
phones; which have a base unit connected to the telephone wiring in a house,
typically operate at far lower power levels, and thus produce RF exposures far
below the FCC safety limits.
4. What are the results of the research done already?
The research done thus far has produced conflicting results, and many studies
have suffered from flaws in their research methods. Animal experiments
investigating the effects of radio frequency energy (RF) exposures characteristic
of wireless phones have yielded conflicting results that often cannot be repeated
115
Copyright © 2005 Nokia
in other laboratories. A few animal studies, however, have suggested that low
levels of RF could accelerate the development of cancer in laboratory animals.
However, many of the studies that showed increased tumor development used
animals that had been genetically engineered or treated with cancer-causing
chemicals so as to be pre-disposed to develop cancer in the absence of RF
exposure. Other studies exposed the animals to RF for up to 22 hours per day.
These conditions are not similar to the conditions under which people use
wireless phones, so we don’t know with certainty what the results of such
studies mean for human health.
Three large epidemiology studies have been published since December 2000.
Between them, the studies investigated any possible association between the
use of wireless phones and primary brain cancer, glioma, meningioma, or acoustic
neuroma, tumors of the brain or salivary gland, leukemia, or other cancers.
None of the studies demonstrated the existence of any harmful health effects
from wireless phone RF exposures. However, none of the studies can answer
questions about long-term exposures, since the average period of phone use
in these studies was around three years.
5. What research is needed to decide whether RF exposure from wireless
phones poses a health risk?
A combination of laboratory studies and epidemiological studies of people
actually using wireless phones would provide some of the data that are needed.
Lifetime animal exposure studies could be completed in a few years. However,
very large numbers of animals would be needed to provide reliable proof of a
cancer promoting effect if one exists. Epidemiological studies can provide
data that is directly applicable to human populations, but 10 or more years
follow-up may be needed to provide answers about some health effects, such
as cancer. This is because the interval between the time of exposure to a
cancer-causing agent and the time tumors develop - if they do - may be
many, many years. The interpretation of epidemiological studies is hampered
by difficulties in measuring actual RF exposure during day-to-day use of
wireless phones. Many factors affect this measurement, such as the angle at
which the phone is held, or which model of phone is used.
6. What is FDA doing to find out more about the possible health effects of
wireless phone RF?
FDA is working with the U.S. National Toxicology Program and with groups of
investigators around the world to ensure that high priority animal studies are
conducted to address important questions about the effects of exposure to
radiofrequency energy (RF).
116
Copyright © 2005 Nokia
FDA has beena leading participant in the World Health Organization International
Electromagnetic Fields (EMF) Project since its inception in 1996. An influential
result of this work has been the development of a detailed agenda of research
needs that has driven the establishment of new research programs around
the world. The Project has also helped develop a series of public information
documents on EMF issues.
FDA and the Cellular Telecommunications & Internet Association (CTIA) have
a formal Cooperative Research and Development Agreement (CRADA) to do
research on wireless phone safety. FDA provides the scientific oversight, obtaining
input from experts in government, industry, and academic organizations.
CTIA-funded research is conducted through contracts to independent
investigators. The initial research will include both laboratory studies and
studies of wireless phone users. The CRADA will also include a broad assessment
of additional research needs in the context of the latest research developments
around the world.
7. How can I find out how much radiofrequency energy exposure I can get
by using my wireless phone?
All phones sold in the United States must comply with Federal Communications
Commission (FCC) guidelines that limit radiofrequency energy (RF) exposures.
FCC established these guidelines in consultation with FDA and the other federal
health and safety agencies. The FCC limit for RF exposure from wireless
telephones is set at a Specific Absorption Rate (SAR) of 1.6 watts per kilogram
(1.6 W/kg). The FCC limit is consistent with the safety standards developed by
the Institute of Electrical and Electronic Engineering (IEEE) and the National
Council on Radiation Protection and Measurement. The exposure limit takes
into consideration the body’s ability to remove heat from the tissues that
absorb energy from the wireless phone and is set well below levels known to
have effects.
Manufacturers of wireless phones must report the RF exposure level for each
model of phone to the FCC. The FCC website (http://www.fcc.gov/oet/rfsafety)
gives directions for locating the FCC identification number on your phone so
you can find your phone’s RF exposure level in the online listing.
8. What has FDA done to measure the radiofrequency energy coming from
wireless phones?
The Institute of Electrical and Electronic Engineers (IEEE) is developing a
technical standard for measuring the radiofrequency energy (RF) exposure from
wireless phones and other wireless handsets with the participation and
leadership of FDA scientists and engineers. The standard, Recommended Practice
for Determining the Spatial-Peak Specific Absorption Rate (SAR) in the Human
117
Copyright © 2005 Nokia
Body Due to Wireless Communications Devices: Experimental Techniques, sets
forth the first consistent test methodology for measuring the rate at which RF is
deposited in the heads of wireless phone users. The test method uses a tissue-
simulating model of the human head. Standardized SAR test methodology is
expected to greatly improve the consistency of measurements made at different
laboratories on the same phone. SAR is the measurement of the amount of
energy absorbed in tissue, either by the whole body or a small part of the body.
It is measured in watts/kg (or milliwatts/g) of matter. This measurement is
used to determine whether a wireless phone complies with safety guidelines.
9. What steps can I take to reduce my exposure to radiofrequency energy
from my wireless phone?
If there is a risk from these products—and at this point we do not know that
there is—it is probably very small. But if you are concerned about avoiding
even potential risks, you can take a few simple steps to minimize your exposure
to radiofrequency energy (RF). Since time is a key factor in how much exposure
a person receives, reducing the amount of time spent using a wireless phone
will reduce RF exposure.
If you must conduct extended conversations by wireless phone every day, you
could place more distance between your body and the source of the RF, since
the exposure level drops off dramatically with distance. For example, you
could use a headset and carry the wireless phone away from your body or use
a wireless phone connected to a remote antenna.
Again, the scientific data do not demonstrate that wireless phones are harmful.
But if you are concerned about the RF exposure from these products, you can
use measures like those described above to reduce your RF exposure from
wireless phone use.
10. What about children using wireless phones?
The scientific evidence does not show a danger to users of wireless phones,
including children and teenagers. If you want to take steps to lower exposure
to radiofrequency energy (RF), the measures described above would apply to
children and teenagers using wireless phones. Reducing the time of wireless
phone use and increasing the distance between the user and the RF source will
reduce RF exposure.Some groups sponsored by other national governments
have advised that children be discouraged from using wireless phones at all. For
example, the government in the United Kingdom distributed leaflets containing
such a recommendation in December 2000. They noted that no evidence exists
that using a wireless phone causes brain tumors or other ill effects. Their
recommendation to limit wireless phone use by children was strictly precautionary;
it was not based on scientific evidence that any health hazard exists.
118
Copyright © 2005 Nokia
11. What about wireless phone interference with medical equipment?
Radiofrequency energy (RF) from wireless phones can interact with some
electronic devices. For this reason, FDA helped develop a detailed test
method to measure electromagnetic interference (EMI) of implanted cardiac
pacemakers and defibrillators from wireless telephones. This test method is
now part of a standard sponsored by the Association for the Advancement of
Medical instrumentation (AAMI). The final draft, a joint effort by FDA, medical
device manufacturers, and many other groups, was completed in late 2000.
This standard will allow manufacturers to ensure that cardiac pacemakers
and defibrillators are safe from wireless phone EMI. FDA has tested hearing
aids for interference from handheld wireless phones and helped develop a
voluntary standard sponsored by the Institute of Electrical and Electronic
Engineers (IEEE). This standard specifies test methods and performance
requirements for hearing aids and wireless phones so that no interference
occurs when a person uses a compatible phone and a accompanied hearing
aid at the same time. This standard was approved by the IEEE in 2000.FDA
continues to monitor the use of wireless phones for possible interactions with
other medical devices. Should harmful interference be found to occur, FDA will
conduct testing to assess the interference and work to resolve the problem.
12. Where can I find additional information?
For additional information, please refer to the following resources:
• FDA web page on wireless phones
http://www.fda.gov/cdrh/phones/index.html
• Federal Communications Commission (FCC) RF Safety Program
http://www.fcc.gov/oet/rfsafety
• International Commission on Non-Ionizing Radiation Protection
http://www.icnirp.de
• World Health Organization (WHO) International EMF Project
http://www.who.int/emf
• National Radiological Protection Board (UK)
http://www.nrpb.org.uk/
July 18, 2001 For updates: http://www.fda.gov/cdrh/phones
119
Copyright © 2005 Nokia
Index
care and maintenance 101
certification information (SAR) 104
charger
NUMERICS
1-touch dialing 47
connecting 17
information 100
times 106
A
alarm clock 79
antenna 14
automate voicemail 35
auto-update 64
clear the cache 91
color schemes 61
contacts list 45
add 45
B
delete 49
edit 48
send 50
view 49
back cover
removing 15
replacing 16
batteries and chargers 100
battery
countdown timer 86
currency converter 85
customer care 8
charging 17
charging times 106
removing 15
D
replacing 16
dialing codes 36
talk and standby times 106
battery information 106
Bluetooth connectivity 92
business cards 50
display language 68
display settings 61
distribution list 34
E
emergency calls 104
while using wireless Internet 90
enhancement settings 71
charger 72
C
calculator 85
calendar 81
call duration 42
call forwarding 77
call log 41
call restrictions 74
caller groups 46
calls
handsfree 71
headset 71
loopset 72
TTY/TDD 72
enhancements 99
ESN 7
exchange rate 85
extras 98
answering 19
in-call options 20
making 18
120
Copyright © 2005 Nokia
Index
F
N
FCC information 104
feature codes 76
network 75
network services 6
G
O
gallery 55, 57
go to 13
organizer 79
organize 13
P
phone lock 72
H
change lock code 73
phone settings 68
predictive text 23
profiles 44
handsfree 71
headset 17, 71
help 7
help text 13, 69
Q
I
quick keys 10
indicators and icons 11
Infrared 94
R
Radio 57
K
restore factory settings 78
keyguard 20
S
L
safety 4
languages 68
left soft key 13
lock code 73
loopset 72
important safety information 102
scrolling 12
security settings 72
send own caller ID 78
set
loudspeaker 20
date 63
time 63
settings 60
shared memory 7
Standby mode 10
stopwatch 86
M
message folders 37
messages
delete 38
mobile web messages 40
voice messages 34
mobile Internet
sign off 91
mobile web 89
mobile web messages 40
T
talk and standby times 106
text entry 22
121
Copyright © 2005 Nokia
time and date settings 63
timed profiles 60
tone settings 62
touch tones 68
voice dialing 39
voice messages 34
voice privacy 75
voice recorder 59
voicemail 35
TTY/TDD 72
turn phone off 17
turn phone on 17
volume
adjusting 19
using the loudspeaker 20
V
W
view
call duration 42
call times 42
data/fax call duration 43
dialed numbers 42
minibrowser duration 44
missed calls 41
own phone number 78
received calls 41
saved messages 37
wallpaper 61
warranty 7, 107
welcome note 69
wireless Internet 89
make an emergency call 90
receive a call while online 90
sign on 89
122
Copyright © 2005 Nokia
|