Nokia 6210 Navigator User Manual

Nokia 6210 Navigator User Guide  
Draft April 25, 2008  
Export controls  
This device may contain commodities, technology or software subject to export laws and regulations from  
the US and other countries. Diversion contrary to law is prohibited.  
FCC/INDUSTRY CANADA NOTICE  
Your device may cause TV or radio interference (for example, when using a telephone in close proximity to  
receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such  
interference cannot be eliminated. If you require assistance, contact your local service facility. This device  
complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This  
device may not cause harmful interference, and (2) this device must accept any interference received,  
including interference that may cause undesired operation. Any changes or modifications not expressly  
approved by Nokia could void the user's authority to operate this equipment.  
The third-party applications provided with your device may have been created and may be owned by  
persons or entities not affiliated with or related to Nokia. Nokia does not own the copyrights or  
intellectual property rights to the third-party applications. As such, Nokia does not take any responsibility  
for end-user support, functionality of the applications, or the information in the applications or these  
materials. Nokia does not provide any warranty for the third-party applications.  
BY USING THE APPLICATIONS YOU ACKNOWLEDGE THAT THE APPLICATIONS ARE PROVIDED AS IS  
WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, TO THE MAXIMUM EXTENT PERMITTED BY  
APPLICABLE LAW. YOU FURTHER ACKNOWLEDGE THAT NEITHER NOKIA NOR ITS AFFILIATES MAKE ANY  
REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO  
WARRANTIES OF TITLE, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR THAT THE  
APPLICATIONS WILL NOT INFRINGE ANY THIRD-PARTY PATENTS, COPYRIGHTS, TRADEMARKS, OR OTHER  
RIGHTS.  
Contents  
SAFETY.............................................. 6 4. Write text................................... 27  
Traditional and predictive text input........ 27  
Copy and delete text..................................... 28  
Support............................................. 8  
Help ...................................................................... 8  
Nokia support and contact information .... 8  
5. Messaging .................................. 28  
Write and send messages ............................ 28  
Inbox.................................................................. 29  
Service messages............................................ 29  
E-mail................................................................ 30  
Outbox............................................................... 30  
Message reader............................................... 31  
View messages on the SIM card................ 31  
Cell broadcast ................................................. 31  
Service commands......................................... 31  
Messaging settings........................................ 31  
1. Get started.................................... 9  
Insert a (U)SIM card and battery ................. 9  
Memory card...................................................... 9  
Charge the battery........................................ 10  
Switch the device on and off..................... 11  
Antenna locations ......................................... 11  
Configuration settings ................................. 11  
Welcome application.................................... 12  
Settings wizard............................................... 12  
2. Your device................................. 13  
Keys and parts................................................ 13  
Standby mode................................................. 14  
Indicators......................................................... 15  
Screen saver.................................................... 16  
Menu................................................................. 16  
6. Contacts ..................................... 32  
Save and manage contact information ... 32  
Contact groups ............................................... 33  
Add a ringing tone......................................... 33  
7. Positioning................................. 33  
Mark items in an application..................... 16 About GPS........................................................ 33  
Switch between applications..................... 17 Assisted GPS.................................................... 34  
Close an application ..................................... 17 Set up GPS connection................................. 34  
Volume control............................................... 17 Position requests............................................ 35  
Motion sensor................................................. 17 Maps .................................................................. 35  
Keypad lock (keyguard)................................ 17 Landmarks........................................................ 41  
Remote lock..................................................... 18 GPS data........................................................... 41  
Access codes ................................................... 18  
8. Gallery ........................................ 42  
Download!........................................................ 19  
Main view......................................................... 42  
My own............................................................. 19  
Download files ................................................ 43  
Connect a compatible headset.................. 20  
View images..................................................... 43  
Connect a USB data cable .......................... 20  
Edit images ...................................................... 43  
Edit video clips................................................ 43  
3. Call functions............................. 20  
Make a voice call........................................... 20 Print images..................................................... 43  
Answer or reject a call................................. 22 Share online..................................................... 43  
Video calls........................................................ 23  
9. Camera........................................ 45  
Call settings..................................................... 23  
Capture images............................................... 45  
Video sharing.................................................. 25  
Record video clips.......................................... 46  
Log ..................................................................... 26  
Capture panoramic images ......................... 46  
4
Voice commands ............................................ 60  
Phone settings ................................................ 60  
Speech............................................................... 62  
10.Media......................................... 47  
Music player.................................................... 47  
Nokia Podcasting........................................... 49  
Radio ................................................................. 51  
RealPlayer ........................................................ 52  
Flash Player ..................................................... 53  
Recorder ........................................................... 53  
16.Data management.................... 62  
Install or remove applications.................... 62  
File manager.................................................... 64  
Licences............................................................. 64  
Device manager.............................................. 65  
11.Internet...................................... 53  
Browse the web.............................................. 53  
Search ............................................................... 56  
17.Connectivity.............................. 66  
Transfer or synchronise data....................... 66  
PC Suite............................................................. 67  
Bluetooth connectivity................................. 67  
USB connection .............................................. 69  
Remote synchronisation............................... 70  
Push to talk...................................................... 70  
Connection manager..................................... 71  
12.Personalisation.......................... 56  
Themes.............................................................. 56  
Profiles.............................................................. 56  
13.Time management.................... 57  
Clock.................................................................. 57  
Calendar ........................................................... 57  
18.Enhancements .......................... 71  
19.Battery and charger  
14.Office applications ................... 57  
Active notes..................................................... 57  
Notes................................................................. 58 information  
72  
Calculator......................................................... 58 Nokia battery authentication guidelines. 73  
Converter.......................................................... 58  
Care and maintenance................... 74  
Additional safety information...... 75  
Index............................................... 79  
Mobile dictionary........................................... 58  
Adobe Reader.................................................. 59  
Quickoffice ...................................................... 59  
15.Settings ..................................... 60  
5
SAFETY  
Read these simple guidelines. Not following them may be dangerous or illegal. Read the  
complete user guide for further information.  
SWITCH ON SAFELY  
Do not switch the device on when wireless phone use is prohibited or when it  
may cause interference or danger.  
ROAD SAFETY COMES FIRST  
Obey all local laws. Always keep your hands free to operate the vehicle while  
driving. Your first consideration while driving should be road safety.  
INTERFERENCE  
All wireless devices may be susceptible to interference, which could affect  
performance.  
SWITCH OFF IN RESTRICTED AREAS  
Follow any restrictions. Switch the device off in aircraft, near medical  
equipment, fuel, chemicals, or blasting areas.  
QUALIFIED SERVICE  
Only qualified personnel may install or repair this product.  
ENHANCEMENTS AND BATTERIES  
Use only approved enhancements and batteries. Do not connect incompatible  
products.  
WATER-RESISTANCE  
Your device is not water-resistant. Keep it dry.  
About your device  
The wireless device described in this guide is approved for use on the GSM 850, 900, 1800,  
and 1900 and UMTS 850 and 1900 networks. Contact your service provider for more  
information about networks.  
When using the features in this device, obey all laws and respect local customs, privacy and  
legitimate rights of others, including copyrights.  
Copyright protection may prevent some images, music, and other content from being  
copied, modified, or transferred.  
Your device supports several methods of connectivity. Like computers, your device may be  
exposed to viruses and other harmful content. Exercise caution with messages, connectivity  
requests, browsing, and downloads. Only install and use services and other software from  
trustworthy sources that offer adequate security and protection against harmful software,  
such as applications that are Symbian Signed or have passed the Java Verified™testing.  
S A F E T Y  
6
Consider installing antivirus and other security software on your device and any connected  
computer.  
Your device may have preinstalled bookmarks and links for third-party internet sites. You  
may also access other third-party sites through your device. Third-party sites are not  
affiliated with Nokia, and Nokia does not endorse or assume liability for them. If you choose  
to access such sites, you should take precautions for security or content.  
Warning: To use any features in this device, other than the alarm clock, the device  
must be switched on. Do not switch the device on when wireless device use may  
cause interference or danger.  
The office applications support common features of Microsoft Word, PowerPoint, and Excel  
(Microsoft Office 2000, XP, and 2003). Not all file formats can be viewed or modified.  
Remember to make back-up copies or keep a written record of all important information  
stored in your device.  
When connecting to any other device, read its user guide for detailed safety instructions. Do  
not connect incompatible products.  
Network services  
To use the phone you must have service from a wireless service provider. Many of the  
features require special network features. These features are not available on all networks;  
other networks may require that you make specific arrangements with your service provider  
before you can use the network services. Your service provider can give you instructions and  
explain what charges will apply. Some networks may have limitations that affect how you  
can use network services. For instance, some networks may not support all language-  
dependent characters and services.  
Your service provider may have requested that certain features be disabled or not activated  
in your device. If so, these features will not appear on your device menu. Your device may  
also have a special configuration such as changes in menu names, menu order, and icons.  
Contact your service provider for more information.  
This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some  
features of this device, such as multimedia messaging, web browsing, and e-mail require  
network support for these technologies.  
Battery removing  
Always switch the device off and disconnect the charger before removing the battery.  
S A F E T Y  
7
Support  
Help  
Your device has context-sensitive help. To access help when an application is  
open, select Options > Help. To switch between help and the application that is  
open in the background, select and hold , and select from the list of open  
applications.  
To open help from the main menu, select > Help > Help. Select an application  
to view a list of help topics, and select the related help text. To open a keyword  
list, select Options > Search.  
Nokia support and contact information  
information, downloads, and services related to your Nokia product.  
On the website, you can get information on the use of Nokia products and  
services. If you need to contact Nokia Care services, check the list of local Nokia  
For maintenance services, check your nearest Nokia Care point at  
Software updates  
Nokia may produce software updates that may offer new features, enhanced  
functions, or improved performance. You may be able to request these updates  
through the Nokia Software Updater PC application. To update the device  
software, you need the Nokia Software Updater application and a compatible PC  
with Microsoft Windows 2000, XP, or Vista operating system, broadband internet  
access, and a compatible data cable to connect your device to the PC.  
To get more information and to download the Nokia Software Updater application, visit  
If software updates over the air are supported by your network, you may also be able to  
request updates through the device.  
Downloading software updates may involve the transmission of large amounts of data  
through your service provider's network. Contact your service provider for information about  
data transmission charges.  
Make sure that the device battery has enough power, or connect the charger before starting  
the update.  
S u p p o r t  
8
1. Get started  
Insert a (U)SIM card and battery  
This device uses BL-5F batteries.  
1. To open the back cover of the  
device, press the back cover  
release button.  
2. Lift the back cover to remove it.  
3. To remove the battery, lift it from  
the end.  
4. Slide the (U)SIM card into the SIM card  
holder. Ensure that the gold-coloured  
contact area on the card is facing  
downward on the device, and the  
beveled corner faces toward the card  
holder slot.  
5. Replace the battery.  
6. Replace the back cover.  
Memory card  
Use only compatible microSD and microSDHC cards approved by Nokia for use with  
this device. Nokia uses approved industry standards for memory cards, but some  
brands may not be fully compatible with this device. Incompatible cards may  
damage the card and the device and corrupt data stored on the card.  
Insert a memory card  
Note that the memory card may be supplied with the device, and may already be  
inserted.  
G e t s t a r t e d  
9
1. Open the memory card slot door.  
2. Place the memory card in the slot  
with the gold-coloured area  
facing down. Push the card gently  
to lock it into place.  
3. Close the slot door.  
Remove a memory card  
Important: Do not remove the memory card in the middle of an operation when  
the card is being accessed. Removing the card in the middle of an operation may  
damage the memory card as well as the device, and data stored on the card may be  
corrupted.  
1. In the standby mode, briefly press the power key.  
2. Scroll to Remove memory card, and select OK > Yes.  
3. Open the memory card slot door.  
4. Push the card gently to release it.  
5. Pull the card out, and select OK.  
6. Close the slot door.  
Charge the battery  
Your battery has been precharged but the charging levels may vary.  
1. Connect the charger to the wall outlet.  
2. Connect the charger to the device.  
You can use your device while it is  
charging.  
3. When the battery is fully charged,  
disconnect the charger from the  
device, then from the wall outlet.  
If the battery is completely discharged,  
it may take a few minutes before the  
charging indicator appears on the  
display or before any calls can be made.  
The charging time depends on the charger and the battery used.  
G e t s t a r t e d  
10  
Switch the device on and off  
Press and hold the power key.  
If the device asks for a PIN code, enter the PIN code, and  
select OK.  
If the device asks for the lock code, enter the lock code,  
and select OK. The factory setting for the lock code is  
12345.  
Set time and date  
To set the correct time zone, time, and date, select the  
country you are presently in, then enter the local time  
and date.  
My Nokia  
My Nokia is a free service that sends you tips, tricks, and support for your Nokia  
device regularly as text messages. If My Nokia is available in your country and  
supported by your service provider, your device invites you to join the My Nokia  
service after you have set the time and date.  
Select the language for the service. If you change the language, the device  
restarts. To sign-up to My Nokia , select Accept and follow the instructions on the  
display.  
To sign-up to My Nokia later, select > Applications > My Nokia.  
Antenna locations  
Cellular antenna (1)  
Bluetooth antenna (2)  
GPS antenna (3)  
Your device may have internal and external antennas. As with any radio  
transmitting device, avoid touching the antenna area unnecessarily  
while the antenna is transmitting or receiving. Contact with such an  
antenna affects the communication quality and may cause the device to  
operate at a higher power level than otherwise needed and may reduce  
the battery life.  
Configuration settings  
Before you can use multimedia messaging, push to talk, e-mail, synchronisation,  
streaming, and the browser, you must have the proper configuration settings on  
G e t s t a r t e d  
11  
your device. Your device may automatically configure browser, multimedia  
messaging, access point, and streaming settings based on the SIM card used.  
Otherwise, you can use the Sett. wizard application to configure the settings, or  
you may receive the settings directly as a configuration message, which you save  
to your device. For more information on availability, contact your service provider  
or nearest authorised Nokia dealer.  
When you receive a configuration message, and the settings are not automatically  
saved and activated, 1 new message is displayed. To save the settings, select  
Show > Options > Save. You may need to enter a PIN code provided by the service  
provider.  
Welcome application  
The Welcome application starts when you switch on your device for the first time.  
With the Welcome application, you can access the following applications:  
Tutorial — Learn about the features of your device and how to use them. To start  
the tutorial later, select > Help > Tutorial and a tutorial item.  
Sett. wizard — Configure connection settings. See “Settings wizard,” p. 12.  
E-mail settings — Configure e-mail settings. See “E-mail settings,” p. 32.  
Switch — Copy or synchronise data from other compatible devices.  
To open Welcome later, select > Help > Welcome.  
Settings wizard  
The setting wizard application configures your device for operator and e-mail  
settings based on your service provider. Configuring other settings may also be  
possible.  
To use these services, you may have to contact your service provider to activate a  
data connection or other services.  
Select > Settings > Sett. wizard.  
G e t s t a r t e d  
12  
2. Your device  
Keys and parts  
1 - Earpiece  
2 - Secondary camera lens  
3 - Light sensor  
4 - Display  
5 - Left and right selection keys  
6 - NaviTM scroll key, hereafter referred to as  
scroll key, and status light around it  
7 - Menu key  
8 - Clear key  
9 - Call key  
10 - Power key / end key  
11 - Navigator key with GPS light  
12 - Number keys  
13 - Charger connector  
14 - Headset connector  
15 - Volume keys  
16 - Camera key  
17 - Camera flash  
18 - Main camera lens  
19 - Loudspeaker  
20 - Micro USB connector  
21 - Memory card slot  
22 - Back cover release button  
23 - Microphone  
During extended operation, the device may  
feel warm. In most cases, this condition is normal. If you suspect the device is not working  
properly, take it to the nearest authorised service facility.  
Y o u r d e v i c e  
13  
Standby mode  
When you have switched on the device, and it is registered to a network, the  
device is in the standby mode and ready for use.  
To select the view for the standby mode, select > Settings > Phone sett. >  
General > Personalisation > Standby mode > Standby theme.  
Keep your device away from magnets or magnetic fields as they may cause some  
applications to activate unexpectedly.  
Shortcuts in the standby mode  
To open a list of most recently dialled numbers, press the call key.  
To call your voice mailbox, press and hold the 1 key.  
To call your video mailbox, press and hold the 2 key.  
To use the voice commands or voice dialling, press and hold the right  
selection key.  
To listen to new received messages, press and hold the left selection key until  
Msg. reader starts.  
To change the profile, briefly press the power key, and select a profile.  
To quickly change to silent profile from any other profile, in the standby mode,  
press and hold #.  
To start a connection to the web, press and hold 0.  
Depending on the selected standby theme, you can select applications or events to  
add to a shortcut list in the standby mode or the scroll keys. To select the  
applications or events, select > Settings > Phone sett. > General >  
Personalisation > Standby mode > Shortcuts.  
Offline profile  
To quickly activate the Offline profile, in the standby mode, briefly press the  
power key, and select Offline. To leave the Offline profile, briefly press the  
power key, and select another profile.  
When the Offline profile is active, all the connections to a cellular network are  
turned off. However, you can use your device without a SIM card, and listen to the  
radio or music using the Music Player. Remember to switch off your device when  
wireless phone use is prohibited.  
Y o u r d e v i c e  
14  
Important: In the offline profile you cannot make or receive any calls, or use other  
features that require cellular network coverage. Calls may still be possible to the  
official emergency number programmed into your device. To make calls, you must  
first activate the phone function by changing profiles. If the device has been  
locked, enter the lock code.  
Indicators  
Icons  
or — The device is connected to a UMTS or GSM network.  
— HSDPA (network service) in the UMTS network is activated.  
— The device is in the Offline profile and not connected to a cellular network.  
— A memory card is inserted in the device.  
— You have unread messages in the inbox in Messaging.  
— You have new e-mail in your remote mailbox.  
— You have messages waiting to be sent in outbox.  
— You have missed calls.  
Ringing type is set to Silent and Message alert tone and E-mail alert tone are  
set to Off.  
— The device keypad is locked.  
— The loudspeaker is activated.  
— An alarm is active.  
— All calls to the device are diverted to another number.  
or  
— A headset or a loopset is connected to the device.  
or or — A GPRS packet data connection is active, or the connection is on  
hold, or a connection is available.  
or or — A packet data connection is active in a part of the network that  
supports EGPRS, or the connection is on hold, or a connection is available. Your  
device may not use EGPRS in the data transfer.  
or or — A UMTS packet data connection is active, or the connection is on  
hold, or a connection is available.  
or  
— Bluetooth connectivity is switched on, or data is being transmitted  
using Bluetooth technology.  
— A USB connection is active.  
Y o u r d e v i c e  
15  
— The GPS receiver is active  
Other indicators may also be shown.  
Light indication  
GPS light  
The GPS light blinks when your device is trying to establish a GPS connection, and  
remains on when the GPS connection is established. When you close an  
application using GPS connection, the light blinks quickly a few times.  
Status light  
The status light blinks slowly for a few minutes after a missed event, such as a  
missed call.  
You can set the status light to blink slowly to indicate when the device is switched  
on. The light turns on for a few second at intervals of approximately 20 seconds.  
To activate the status light, select > Settings > Phone sett. > General >  
Personalisation > Standby mode > Status light > On.  
Screen saver  
To set the screen saver settings, select > Settings > Phone sett. > General >  
Personalisation > Display > Screen saver. To set the timeout period after which  
the screen saver is activated, select Screen saver time-out. To set for how long the  
screen saver is active, select Screen saver duration.  
Menu  
In the menu you can access the functions in your device. To access the main menu,  
select  
.
To open an application or a folder, scroll to it, and press the scroll key.  
If you change the order of the functions in the menu, the order may differ from  
the default order described in this user guide.  
To change the menu view, select Options > Change Menu view and a view type.  
Mark items in an application  
To mark or unmark an item in applications, such as an image or a video clip in  
Gallery, press #. To mark or unmark several consecutive items, press and hold #,  
and scroll.  
Y o u r d e v i c e  
16  
Switch between applications  
To switch between open applications, do one of the following:  
• Select Options > Show open applicats. and the application.  
• Press and hold . Scroll to an application, and select it.  
Close an application  
To close an application or a folder, select Back and Exit as many times as needed  
to return to the standby mode, or select Options > Exit.  
Leaving applications running in the background increases the demand on battery power and  
reduces the battery life.  
Volume control  
To adjust the earpiece or loudspeaker volume during a call or when listening to an  
audio file, press the volume keys. To activate or deactivate the loudspeaker during  
a call, select Loudsp. or Handset.  
Warning: Do not hold the device near your ear when the loudspeaker is in use,  
because the volume may be extremely loud.  
Motion sensor  
Your device has an accelerometer that senses senses the movement of the device.  
To edit the accelerometer settings, select > Settings > Phone sett. > General >  
Sensor settings.  
Display rotation  
When Sensors is set On and you turn the device on its left side or back to a vertical  
position, the display content is rotated 90 degrees. Some applications and  
features may not support rotating the display content.  
Turning control  
To be able to silence calls and snooze alarms by turning the device so that the  
display faces down, select Sensors > On. Select Turning control, and mark  
Silencing calls and Snoozing alarms.  
Keypad lock (keyguard)  
To lock the keypad when you close the slide, select > Settings > Phone sett. >  
General > Slide handling > Keyguard activation > Change > On when closing  
slide.  
Y o u r d e v i c e  
17  
To set the device to automatically lock the keypad after a certain time, select  
Settings > Phone sett. > General > Security > Phone and SIM card > Keypad  
autolock period > User defined and the desired time.  
>
Opening the slide unlocks the keypad. To unlock the keypad when the slide is  
closed, press the left selection key and select OK within 1.5 seconds.  
When the device or keypad is locked, calls may be possible to the official emergency number  
programmed into your device.  
Remote lock  
You can lock your device and memory card remotely using a text message. To  
enable remote locking and to define the text message content to be used, select  
> Settings > Phone sett. > General > Security > Phone and SIM card > Remote  
phone locking > Enabled. Enter the text message content (5 to 20 characters),  
verify it, and enter the lock code.  
Access codes  
To set how your device uses the access codes, select > Settings > Phone sett. >  
General > Security > Phone and SIM card.  
Lock code  
The lock code (5 digits) helps to lock your device. The preset code is 12345. Change  
the code, keep the new code secret and in a safe place separate from your device.  
To change the lock code, select > Settings > Phone sett. > General > Security >  
Phone and SIM card > Lock code. To activate the automatic locking of your device,  
select Phone autolock period > User defined.  
If you forget the code and your device is locked, your device will require service  
and additional charges may apply. For more information, contact a Nokia Care  
point or your device dealer.  
When the device or keypad is locked, calls may be possible to the official emergency number  
programmed into your device.  
PIN codes  
The personal identification number (PIN) code or the universal personal  
identification number (UPIN) code (4 to 8 digits) help to protect your SIM card.  
The (U)PIN code is usually supplied with the SIM card. Set the device to request  
the code each time the device is switched on, select > Settings > Phone sett. >  
General > Security > Phone and SIM card > PIN code request > On.  
Y o u r d e v i c e  
18  
The PIN2 code may be supplied with the SIM card and is required for some  
functions.  
The module PIN is required to access the information in the security module. The  
signing PIN is required for the digital signature. The module PIN and the signing  
PIN are supplied with the SIM card if the SIM card has a security module in it.  
PUK codes  
The personal unblocking key (PUK) code or the universal personal unblocking key  
(UPUK) code (8 digits) are required to change a blocked PIN code and UPIN code,  
respectively. The PUK2 code is required to change a blocked PIN2 code.  
If needed, contact your local service provider for the codes.  
Barring password  
The barring password (4 digits) is required when using call barring. You can obtain  
the password from your service provider. If the password is blocked, contact your  
service provider.  
Download!  
Download! (network service) is a mobile content shop available on your device.  
With Download! you can discover, preview, buy, download, and upgrade content,  
services, and applications. The items are categorised under catalogs and folders  
provided by different service providers. The available content depends on your  
service provider.  
Select > Applications > Download!.  
Download! uses your network services to access the most up-to-date content. For  
information on additional items available through Download!, contact your  
service provider, or the supplier or manufacturer of the item.  
My own  
You can install applications to your device. To access the applications, select  
>
Applications > My own.  
Important: Only install and use applications and other software from trusted  
sources, such as applications that are Symbian Signed or have passed the Java  
VerifiedTM testing.  
Y o u r d e v i c e  
19  
Connect a compatible headset  
Do not connect products that create an  
output signal as this may cause damage to  
the device. Do not connect any voltage  
source to the Nokia AV Connector.  
When connecting any external device or any  
headset, other than those approved by Nokia  
for use with this device, to the  
Nokia AV Connector, pay specialattention to  
volume levels.  
Connect a USB data cable  
Connect a compatible USB data cable  
to the USB connector.  
To select the default USB connection  
mode or change the active mode, select  
> Settings > Connectivity > USB >  
USB connection mode and the desired  
mode. To set whether the default mode  
is activated automatically, select Ask on  
connection > No.  
3. Call functions  
To adjust the volume during a call, press the volume keys.  
Make a voice call  
1. In the standby mode, enter the phone number, including the area code. Press  
the clear key to remove a number.  
For international calls, press * twice for the international prefix (the +  
character replaces the international access code), and enter the country code,  
area code (omit the leading zero if necessary), and phone number.  
2. To call the number, press the call key.  
3. To end the call, or to cancel the call attempt, press the end key.  
To select whether active calls are ended when closing the slide, select  
Settings > Phone sett. > General > Slide handling > Closing the slide >  
Change > End active call or Continue active call  
>
C a l l f u n c t i o n s  
20  
To make a call from Contacts, select > Contacts. Scroll to the desired name; or  
enter the first letters of the name, and scroll to the desired name. To call the  
number, press the call key.  
To call a recently dialled number from the standby mode, press the call key.  
Speed dialling  
Speed dialling is a quick way to call frequently used numbers from the standby  
mode. You need to assign a phone number to the speed dialling keys 3 to 9 (the 1  
and 2 keys are reserved for the voice and video call mailboxes), and set Speed  
dialling to On.  
To assign a phone number to a speed dialling key, select > Settings > Speed  
dial. Scroll to a key icon, and select Assign and the contact. To change the  
number, select Options > Change.  
To activate the speed dialling, select > Settings > Phone sett. > Phone > Call >  
Speed dialling > On.  
To call a speed dialling number, press and hold the speed dialling key until the call  
begins.  
Call mailbox  
To call your voice or video mailboxes (network service), from the standby mode,  
press and hold 1 or 2. You can have call mailboxes for voice calls, video calls, and  
multiple phone lines.  
To define the call mailbox number if no number is set, select > Settings > Call  
mailbox. Scroll to Voice mailbox (or Video mailbox), and enter the corresponding  
mailbox number. To change the call mailbox number, select Options > Change  
number. For the call mailbox number, contact your service provider.  
Voice dialling  
A voice tag is added automatically to all entries in Contacts. Use long names, and  
avoid similar names for different numbers.  
Make a voice dialling call  
Voice tags are sensitive to background noise. Use voice tags in a quiet environment.  
Note: Using voice tags may be difficult in a noisy environment or during an  
emergency, so you should not rely solely upon voice dialling in all circumstances.  
1. In the standby mode, press and hold the right selection key.  
C a l l f u n c t i o n s  
21  
If you are using a compatible headset with the headset key, press and hold the  
headset key.  
2. When Speak now is displayed, speak the voice command clearly. The device  
plays the voice command of the best match. After 1.5 seconds, the device dials  
the number; if the result is not the correct one, before dialling select another  
entry.  
Make a conference call  
Your device supports conference calls (network service) between a maximum of  
six participants, including yourself.  
1. Make a call to the first participant.  
2. To make a call to another participant, select Options > New call.  
3. To create the conference call when the new call is answered, select Options >  
Conference.  
To add another person to the conference call, repeat step 2, and select  
Options > Conference > Add to conference.  
4. To end the conference call, press the end key.  
Answer or reject a call  
To answer a call, press the call key.  
To mute the ringing tone, select Silence.  
To reject the call, press the end key, or select Options > Reject. If you have  
activated Call divert > If busy, rejecting the call diverts the call.  
To send a text message as a reply to the caller instead of answering the call, select  
Options > Send message. To activate the text message reply and edit the message,  
select > Settings > Phone sett. > Phone > Call > Reject call with message and  
Message text.  
To determine whether calls are answered automatically when opening the slide,  
select > Settings > Phone sett. > General > Slide handling > Opening the  
slide > Change > Answer incoming call or Call not answered.  
Call waiting  
During a call, to answer the waiting call, press the call key. The first call is put on  
hold. To switch between the two calls, select Swap. To end the active call, press  
the end key.  
C a l l f u n c t i o n s  
22  
To activate the call waiting function (network service), select > Settings >  
Phone sett. > Phone > Call > Call waiting > Activate.  
Video calls  
Make a video call  
To make a video call, you may need to have a USIM card and be within the  
coverage of a UMTS network. For availability of and subscription to video call  
services, contact your service provider. A video call can only be made between two  
parties and when no other voice, video, or data calls are active. The video call can  
be made to a compatible mobile phone or an ISDN client.  
You have captured a still image to be sent instead of video sending.  
You have denied video sending from your device.  
1. Enter the phone number in the standby mode and select Video call. Or, select  
> Contacts, scroll to the desired contact, and select Options > Video call.  
2. To change between showing video or only hearing sound during a video call,  
select from the toolbar Enable video sending or Disable video sending.  
If you have denied video sending during a video call, the call is still charged as  
a video call. Check the pricing with your network operator or service provider.  
3. To end the video call, press the end key.  
Answer a video call  
When a video call arrives,  
is displayed.  
To answer the video call, press the call key. Allow video image to be sent to caller?  
is shown. If you select Yes, the image captured by the camera in your device is  
shown to the caller. Otherwise, video sending is not activated.  
If you have denied video sending during a video call, the call is still charged as a  
video call. Check the pricing with your service provider.  
To end the video call, press the end key.  
Call settings  
Call  
Select > Settings > Phone sett. > Phone > Call and from the following:  
Send my caller ID (network service) — to display or hide your phone number from  
the person to whom you are calling  
C a l l f u n c t i o n s  
23  
Call waiting (network service) — See “Call waiting,” p. 22.  
Reject call with message and Message text — See “Answer or reject a call,” p. 22.  
Own video in recvd. call— to set whether you allow to send your own video image  
when you receive a video call  
Image in video call — to select a still image to be shown when you deny a video  
call  
Automatic redial — to set your device to make a maximum of 10 attempts to  
connect the call after an unsuccessful call attempt  
Show call duration and Summary after call — to set the device to display the call  
duration during a call and the approximate duration of the last call  
Speed dialling — See “Speed dialling,” p. 21.  
Anykey answer — to answer an incoming call by briefly pressing any key, except  
the left and right selection keys, volume keys, and end key  
Line in use (network service) — to select the phone lines for making calls and  
sending short messages. This is shown only if the SIM card supports two phone  
lines.  
Line change (network service) — to enable or disable the line selection  
Call divert  
1. Select > Settings > Phone sett. > Phone > Call divert (network service).  
2. Select which calls you want to divert, for example, Voice calls.  
3. Select the desired option. For example, to divert voice calls when your number  
is busy or when you reject an incoming call, select If busy.  
4. Select Options > Activate and the phone number to which you want to divert  
the calls. Several divert options can be active at the same time.  
Call barring and call diverting cannot be active at the same time.  
Call barring  
1. Select > Settings > Phone sett. > Phone > Call barring (network service) to  
restrict the calls that you make and receive with your device.  
2. Scroll to the desired barring option, and select Options > Activate. To change  
the settings, you need the barring password given by your service provider.  
Call barring and call diverting cannot be active at the same time.  
When calls are barred, calls may be possible to certain official emergency numbers.  
C a l l f u n c t i o n s  
24  
Network  
Select > Settings > Phone sett. > Phone > Network and from the following:  
Network mode — to select which network to use (this is shown only if it is  
supported by the service provider). If you select Dual mode, the device uses the  
GSM or UMTS network automatically.  
Operator selection — to set the device to search for and automatically select one  
of the available networks, select Automatic. To select the desired network  
manually from a list of networks, select Manual. The selected network must have  
a roaming agreement with your home network.  
Cell info display (network service) — to set the device to indicate when it is used in  
a cellular network based on microcellular network (MCN) technology, and to  
activate cell info reception  
Video sharing  
Use video sharing to send live video from your mobile device to another  
compatible mobile device during a voice call.  
Video sharing requirements  
Video sharing requires a 3G universal mobile telecommunications system (UMTS)  
connection. For information about network availability and the fees associated  
with this application, contact your service provider.  
To use video sharing you must do the following:  
• Ensure that your device is set up for person-to-person connections.  
• Ensure that both the sender and recipient are registered to the UMTS network.  
• Ensure you have an active UMTS connection and you are within UMTS network  
coverage. If you move away from a UMTS network during the sharing session,  
the sharing session is discontinued, but your voice call continues.  
Video sharing settings  
A person-to-person connection is also known as a session initiation protocol (SIP)  
connection. Before you can use video sharing, ask your service provider for the  
configured SIP profile to be used in your device.  
Select > Settings > Phone sett. > Connection > Video sharing and from the  
following:  
Video sharing — to select whether the video sharing is enabled  
SIP profile — to select a SIP profile  
C a l l f u n c t i o n s  
25  
Video saving — to set whether the live videos are automatically saved  
Preferred saving memory — to select whether to save the videos to the device  
memory or to a memory card  
Capability alert tone — to set an alert tone to sound when video sharing is  
available during a call  
If you know a recipient’s SIP address, you can save it to Contacts. Select  
>
Contacts, the contact, and Options > Edit > Options > Add detail > SIP or Share  
video. Enter the SIP address (username@domainname). You can use an IP address  
instead of a domain name.  
Share live video or video clip  
1. To share live video you are recording with the device camera, select Options >  
Share video > Live video during a voice call. To share a saved video clip, select  
Video clip and the clip you want to share.  
2. The device sends the invitation to the SIP address you saved to Contacts.  
If necessary, to send the invitation, select the SIP address of the recipient; or  
enter a SIP address, and select OK.  
3. Sharing begins automatically when the recipient accepts the invitation, and  
the loudspeaker is active. Use the toolbar buttons to control the video sharing.  
4. To end the sharing session, select Stop. To end the voice call, press the end key.  
Accept an invitation  
Your device rings when you receive an invitation. The invitation shows the  
sender’s name or SIP address. Select Yes to begin the sharing session. To decline  
the invitation and to return to the voice call, select No.  
Log  
To view missed, received, or dialled calls; text messages; packet data connections;  
and fax and data calls registered by the device, select > Log.  
In the standby mode, you can use the call key as a shortcut to Dialled numbers in  
the Recent calls log (network service).  
Note: The actual invoice for calls and services from your service provider may vary,  
depending on network features, rounding off for billing, taxes, and so forth.  
Note: Some timers, including the life timer, may be reset during service or software  
upgrades.  
C a l l f u n c t i o n s  
26  
4. Write text  
Traditional and predictive text input  
When you write text,  
on the display indicates predictive text input and  
traditional text input. To set the predictive text input on or off, press # repeatedly,  
or press *, and select Activate predictive text or Predictive text > Off.  
,
,
or  
next to the text input indicator indicates the character  
case or number mode. To change the character case, or to change between letter  
and number mode, press # repeatedly.  
To change the writing language of your device, select > Settings > Phone  
sett. > General > Personalisation > Language > Writing language. The writing  
language affects the characters available when writing text and the predictive  
text dictionary used. Not all characters available under a number key are printed  
on the key.  
Write with traditional text input  
Press a number key, 2 to 9, repeatedly until the desired character appears. Press  
the 1 key for the most common punctuation marks and special characters.  
If the next letter you want is on the same key as the present one, wait until the  
cursor appears (or scroll forward to end the time-out period), and enter the letter.  
Write with predictive text input  
1. Press a number key, 29, only once for one letter. The word changes after every  
keypress. For the most common punctuation marks, press 1.  
2. When you have finished the word and it is correct, to confirm it, scroll forward  
or insert a space.  
If the word is not correct, to view the matching words the dictionary has found  
one by one, press * repeatedly.  
If the ? character is shown after the word, the word you intended to write is  
not in the dictionary. To add a word to the dictionary, select Spell. Enter the  
word (up to 32 letters), and select OK. The word is added to the dictionary.  
When the dictionary becomes full, a new word replaces the oldest added word.  
Common functions in traditional and predictive text input  
To insert a number, press and hold the number key.  
To enter punctuation marks and special characters, press and hold *.  
W r i t e t e x t  
27  
To erase a character, press the clear key. To erase more characters, press and hold  
the clear key.  
To insert a space, press 0. To move the cursor to the next line, press 0 three times.  
Copy and delete text  
1. To select letters and words, press and hold #, and at the same time scroll left or  
right. To select lines of text, press and hold #, and at the same time scroll up or  
down.  
2. To copy the text, press and hold #, and at the same time select Copy.  
To delete the selected text, press the clear key.  
3. To insert the text, scroll to the insertion point, press and hold #, and at the  
same time select Paste.  
5. Messaging  
Before you can receive or send messages or e-mail, you must have the necessary  
settings and access points defined. Contact your service provider for the settings.  
Write and send messages  
Your device supports the sending of text messages beyond the character limit for a single  
message. Longer messages are sent as a series of two or more messages. Your service  
provider may charge accordingly. Characters that use accents or other marks, and characters  
from some language options, take up more space, limiting the number of characters that can  
be sent in a single message.  
The wireless network may limit the size of MMS messages. If the inserted picture exceeds  
this limit, the device may make it smaller so that it can be sent by MMS.  
Only devices that have compatible features can receive and display multimedia messages.  
The appearance of a message may vary depending on the receiving device.  
1. Select > Messaging > New message and the message type. To create a text  
message or multimedia message, select Message. The message type changes  
automatically based on the content.  
2. In the To field, enter the phone numbers or e-mail addresses of the recipients,  
or, to select recipients from Contacts, press the scroll key. Separate recipients  
with a semicolon (;).  
M e s s a g i n g  
28  
3. To enter the subject for a multimedia, or e-mail message, scroll down to the  
Subject field. If the subject field is not visible for a multimedia message, select  
Options > Message header fields, mark Subject, and select OK.  
4. Scroll down to the message field and enter the message content.  
When you write a text message, the message length indicator shows how  
many characters you can enter in the message. For example, 10 (2) means that  
you can still add 10 characters for the text to be sent as a series of two text  
messages.  
To insert an object, such as an image, video clip, note, or a business card, to a  
multimedia, or e-mail message, press the scroll key, and select Insert content.  
To record a new sound clip for an audio message, select Record. To use a  
previously recorded sound clip, select Options > Insert sound clip > From  
Gallery.  
5. To send the message, select Options > Send.  
Inbox  
Inbox contains received messages except e-mail and cell broadcast messages. To  
read received messages, select > Messaging > Inbox and the message.  
To view the list of media objects that are included in the multimedia message,  
open the message, and select Options > Objects.  
Your device can receive many kinds of messages, such as operator logos, business  
cards, calendar entries, and ringing tones. You can save the special message  
content to your device. For example, to save a received calendar entry to the  
calendar, select Options > Save to Calendar.  
Note: The picture message function can be used only if it is supported by your  
service provider. Only compatible devices that offer picture message features can  
receive and display picture messages. The appearance of a message may vary  
depending on the receiving device.  
Service messages  
Service messages (network service) are notifications that may contain a text  
message or the address of a browser service.  
To define whether service messages are enabled and whether the messages are  
downloaded automatically, select > Messaging > Options > Settings > Service  
message.  
M e s s a g i n g  
29  
E-mail  
When you create a new mailbox, the name you give to the mailbox replaces New  
mailbox. You can have up to six mailboxes.  
IMAP4 and POP3 mailboxes  
Select > Messaging and the mailbox. Connect to mailbox? is displayed. To  
connect to your mailbox (network service), select Yes, or to view previously  
retrieved e-mail messages offline, select No.  
To connect to the mailbox afterwards, select Options > Connect. When you are  
online, to end the data connection to the remote mailbox, select Options >  
Disconnect.  
Retrieve and read e-mail messages  
1. Select Options > Retrieve e-mail and whether you want to retrieve new,  
selected, or all messages.  
2. To open an e-mail message, select it.  
To view e-mail attachments, indicated with , select Options > Attachments.  
You can open, save or send attachments in supported formats.  
Delete e-mail messages  
To delete an e-mail message from the device and retain it in the remote mailbox,  
select Options > Delete > Phone only. To delete an e-mail from both the device  
and the remote mailbox, select Options > Delete > Phone and server.  
To cancel deletion of an e-mail from both the device and server, scroll to an e-mail  
that has been marked to be deleted during the next connection, and select  
Options > Restore.  
Sync mailboxes  
Select > Messaging and the sync mailbox.  
To synchronise your device with the remote mailbox, select Options >  
Synchronisation > Start.  
To view received messages, select Inbox and the message.  
Outbox  
The outbox folder is a temporary storage place for messages that are waiting to be  
sent. To access the outbox folder, select > Messaging > Outbox.  
To retry sending a message, scroll to the message and select Options > Send.  
M e s s a g i n g  
30  
To postpone sending a message, scroll to a message, and select Options > Defer  
sending.  
Message reader  
To listen to a message in Inbox or a mailbox, scroll to the message or mark the  
messages, and select Options > Listen.  
Tip: When you have received a new message, to listen to the received  
messages, in the standby mode, press and hold the left selection key until  
Msg. reader starts.  
To select the default language and voice used for reading messages, and adjust  
the voice properties, such as rate and volume, select > Settings > Speech.  
To select other settings for the message reader, in Speech, scroll right to Settings.  
View messages on the SIM card  
Before you can view SIM messages, you need to copy them to a folder in your  
device. Select > Messaging > Options > SIM messages, mark the messages you  
want to copy, and select Options > Copy and the folder to which you want to copy  
the messages.  
Cell broadcast  
Check with your service provider whether cell broadcast (network service) is  
available and what the available topics and related topic numbers are.  
Select > Messaging > Options > Cell broadcast. To activate the service, select  
Options > Settings > Reception > On.  
Service commands  
To enter and send service commands (also known as USSD commands) such as  
activation commands for network services to your service provider, select  
Messaging > Options > Service commands. To send the command, select  
Options > Send.  
>
Messaging settings  
Text message settings  
To define text message settings, such as the message centre and character  
encoding used, select > Messaging > Options > Settings > Text message.  
M e s s a g i n g  
31  
Multimedia messaging settings  
To define multimedia message settings, such as which access point is used and  
whether multimedia messages are retrieved automatically, select  
>
Messaging > Options > Settings > Multimedia message.  
E-mail settings  
Select > Messaging > Options > Settings > E-mail > Mailboxes, the mailbox  
and from the following:  
Connection settings — to define the connection settings, such as the servers and  
protocol used  
User settings — to define user settings, such as when messages are sent and  
whether to include a signature  
Retrieval settings — to define retrieval settings, such as which parts of the  
messages are retrieved and how many messages are retrieved  
Automatic retrieval — to define settings for retrieving messages automatically at  
set intervals or when an e-mail notification is received from the server  
Other settings  
To define whether a specified number of sent messages are saved to the Sent  
folder and whether to store the messages in the device memory or memory card,  
select > Messaging > Options > Settings > Other.  
6. Contacts  
Save and manage contact information  
To save and manage contact information, such as names, phone numbers, and  
addresses, select > Contacts.  
To add a new contact, select Options > New contact. Fill in the fields you want,  
and select Done.  
To set your device to show contacts in the device memory and in the SIM card in  
the list of contacts, select Options > Settings > Contacts to display, and mark  
Phone memory and SIM memory.  
To copy names and numbers from a SIM card to your device or vice versa, scroll to  
the contact (or mark the desired contacts), and select Options > Copy > Phone  
memory or SIM memory.  
C o n t a c t s  
32  
To view information about the memory consumption of contacts, select Options >  
Contacts info.  
To view the list of fixed dialling numbers, select Options > SIM numbers > Fixed  
dial contacts. This setting is only shown if supported by your SIM card.  
When fixed dialling is activated, calls may be possible to the official emergency number  
programmed into your device.  
To assign default numbers and addresses to a contact, select it, and select  
Options > Defaults. Scroll to the desired default option, and select Assign.  
Contact groups  
To create a contact group so that you can send text or e-mail messages to several  
recipients at the same time, select > Contacts. Scroll right, and select  
Options > New group. Enter a name for the group, and open the group. Select  
Options > Add members. Mark the contacts you want to add to the group, and  
select OK.  
Add a ringing tone  
You can set a ringing tone or a video ringing tone for each contact and group. To  
add a ringing tone to a contact, select > Contacts, and open the contact. Select  
Options > Ringing tone and the ringing tone. To add a ringing tone to a group,  
scroll right to the groups list, and scroll to a contact group. Select Options >  
Ringing tone and the ringing tone for the group. To remove the personal or group  
ringing tone, select Default tone as the ringing tone.  
7. Positioning  
You can use applications such as Maps and GPS data to find out your location, or  
measure distances and coordinates. These applications require a GPS connection.  
About GPS  
The Global Positioning System (GPS) is a worldwide radio navigation system that  
includes 24 satellites and their ground stations that monitor the operation of the  
satellites.  
Your device has an internal GPS receiver.  
The Global Positioning System (GPS) is operated by the government of the United States,  
which is solely responsible for its accuracy and maintenance. The accuracy of location data  
can be affected by adjustments to GPS satellites made by the United States government and  
P o s i t i o n i n g  
33  
is subject to change with the United States Department of Defense civil GPS policy and the  
Federal Radionavigation Plan. Accuracy can also be affected by poor satellite geometry.  
Availability and quality of GPS signals may be affected by your location, buildings, natural  
obstacles, and weather conditions. The GPS receiver should only be used outdoors to allow  
reception of GPS signals.  
Any GPS should not be used for precise location measurement, and you should never rely  
solely on location data from the GPS receiver and cellular radio networks for positioning or  
navigation.  
Assisted GPS  
Assisted GPS (A-GPS) is used to retrieve assistance data over a packet data connection,  
which assists in calculating the coordinates of your current location when your device is  
receiving signals from satellites.  
Your network operator may charge you for this connection according to your  
network subscription. Contact your service provider for the correct internet access  
point and charges related to the service.  
To enable or disable a positioning method, such as A-GPS, select > Settings >  
Phone sett. > General > Positioning > Positioning methods, the positioning  
method, and Enable or Disable.  
Your device is preconfigured to use the Nokia A-GPS service, if no service  
provider-specific A-GPS settings are available. The assistance data is retrieved  
from the Nokia A-GPS service server only when needed.  
To use A-GPS, you must have a packet data internet access point defined. Your  
device asks for the internet access point when A-GPS is used for the first time. To  
define the access point, see “Positioning settings,” p. 34.  
Set up GPS connection  
Positioning settings  
Select > Settings > Phone sett. > General > Positioning and from the following:  
Positioning methods — to enable or disable different positioning methods  
Positioning server — to define an access point for A-GPS, select Access point. Only  
a packet data internet access point can be used. Your device asks for the internet  
access point when A-GPS is used for the first time. To select whether to allow  
automatic connections to the positioning server, to be asked every time, or to  
never connect to the positioning server, select Positioning server use. To define the  
server used, select Server address.  
Notation preferences — to define the measurement system and coordinate format  
P o s i t i o n i n g  
34  
Hold your device correctly  
When using the receiver, from an upright position, move the device to an angle of  
about 45 degrees, with an unobstructed view of the sky.  
Establishing a GPS connection may take from a couple of seconds to several  
minutes, even longer in a vehicle. See “GPS light,” p. 16.  
Using the GPS receiver may drain the device battery faster.  
If your device cannot find the satellite signal, consider the following:  
• If you are indoors, go outdoors to receive a better signal.  
• If you are outdoors, move to a more open space.  
• Check that your hand does not cover the GPS receiver of your device.  
• If the weather conditions are bad, the signal strength may be affected.  
• Some vehicles have tinted (athermic) windows, which may block the satellite  
signals.  
Satellite signal status  
To check how many satellites your device has found, and whether your device is  
receiving satellite signals, select > Applications > GPS data > Position >  
Options > Satellite status.  
If your device has found satellites, a bar for each satellite is shown in the satellite  
information view. When your device has received enough data from the satellite  
signal to calculate the coordinates of your location, the bars turn grey.  
Position requests  
You may receive a request from a network service to receive your position  
information. Service providers may offer information about local topics, such as  
weather or traffic conditions, based upon the location of your device.  
When you receive a position request to allow your position information to be sent,  
select Accept, or to deny the request, select Reject.  
Maps  
The map coverage varies by country or region. For example, maps may not be  
available due to legal restrictions of countries or regions. To the maximum extent  
permitted by applicable law, Nokia disclaims any and all warranty with respect to  
the availability, accuracy, correctness or update of maps.  
P o s i t i o n i n g  
35  
About Maps  
With Maps, you can see your current location on the map, browse maps for  
different cities and countries, navigate to a destination with voice guidance,  
search for addresses and different points of interest, plan routes from one location  
to another, and save locations as landmarks and send them to compatible devices.  
You can also purchase extra services, such as travel guides and traffic information.  
These services are not available in all countries or regions.  
Some maps may be pre-loaded on the memory card in your device. You can  
download more maps through the internet using Nokia Map Loader PC software.  
See “Download maps,” p. 38.  
Maps uses GPS. You can define the positioning methods used with your device.  
See “Positioning settings,” p. 34. For the most accurate location information, use  
either the internal GPS or a compatible external GPS receiver.  
Browse maps  
To start Maps, press the Navigator key.  
When you use Maps for the first time, you may need to select a cellular access  
point for downloading map information for your current location. To change the  
default access point later, select Options > Tools > Settings > Internet > Network  
destination.  
To receive a note when your device registers to a network outside your home  
network, select Options > Tools > Settings > Internet > Roaming warning > On.  
For details and roaming costs, contact your network service provider.  
The data transfer indicator shows the internet connection used and the amount of  
data transferred since the application started.  
Almost all digital cartography is inaccurate and incomplete to some extent. Never rely solely  
on the cartography that you download for use in this device.  
When you open Maps, it shows the location that was saved from your last session  
or the capital of the country you are in. The map of the location is also  
downloaded, if needed.  
To establish a GPS connection and zoom in to your last known location, press the  
navigator key, or select Options > My position.  
A GPS indicator (  
) shows the availability and strength of the satellite  
signal. One bar indicates one satellite. When the device receives enough data  
from the satellite to establish a GPS connection, the bar turns green. Your device  
must receive signals from at least four satellites to calculate the coordinates of  
P o s i t i o n i n g  
36  
your location. After the initial calculation, signals from three satellites may be  
enough.  
To zoom in or out, press * or #. To move on the map, use the scroll key. A new map  
is automatically downloaded if you scroll to an area which is not covered by maps  
already downloaded. See “Download maps,” p. 38. The maps are free of charge,  
but downloading may involve the transmission of large amounts of data through  
your service provider's network. For more information on data transmission  
charges, contact your service provider. The maps are automatically saved in the  
device memory or on a compatible memory card (if inserted).  
Compass  
Your device has a magnetic compass.  
The compass should always be properly calibrated. Electromagnetic  
fields, large metal objects, and other external circumstances may reduce the  
accuracy of the compass. Never rely solely on the device compass.  
To enable the compass and try to find your  
current position, press the navigator key. If  
the circle around the compass is red, the  
compass is not calibrated. To calibrate the  
compass, rotate the device around all axes  
with your wrist in a continuous movement  
until the circle is green. When you rotate  
the device, make sure that the device  
display momentarily faces toward the ground.  
If the circle is yellow, the calibration accuracy is low, and you should continue  
rotating the device. When the compass is enabled and the circle around the  
compass is green, the map view turns automatically according to which direction  
the top of the device is pointing.  
To enable or disable the compass, select Options > Tools > Turn compass on or  
Turn compass off. When the compass is not in use, the circle around the compass  
is white and the map view does not turn automatically.  
Find locations  
To find a location in the city or area displayed on the map, enter the full or partial  
address of the location in the search field, and select Search. To find a location in  
another city, enter the city and the full or partial address, and select Search. If  
possible, write the name of city in the local language or English. If you are unsure  
P o s i t i o n i n g  
37  
of the address, enter the only first three characters of the address. To find a city in  
a different country, enter the country’s name in English or the three-letter ISO  
country code and the city. For example, to find London using the country code,  
enter GBR London, and select Search.  
To find a specific address, select Options > Search > Addresses. Country/Region  
and City or post code are mandatory.  
To browse through or search for places and attractions in your area, select  
Options > Search > Places and a category. For example, to find a hotel, select  
Options > Search > Places > Accommodation. To find a hotel by its name, enter  
the name, and select Search, or to browse the hotels, select a category or Search  
all.  
To find an address saved in Contacts, select Options > Search > Addresses >  
Options > Select from Contacts.  
Save and send locations  
To save a location to your device, press the scroll key, and select Add to my places.  
To send a location to a compatible device, press the scroll key, and select Send. If  
you send the location in a text message, the information is converted to plain text.  
View your saved items  
To view the locations or routes you have saved to your device, select Options >  
Favourites > My places or Routes. Locations saved in Landmarks are displayed in  
My places.  
To check which locations you have searched for on the map, select Options >  
Favourites > History.  
To create a collection of your favourite places, select Options > Favourites >  
Collections > New collection. Enter the name for the collection. To add locations  
to your collection, open My places, scroll to a location, press the scroll key, and  
select Add > To collection.  
Download maps  
When you browse a map in Maps, a new map is automatically downloaded if you  
scroll to an area which is not covered by maps already downloaded. The data  
counter (kB) shows the amount of network traffic when you browse maps, create  
routes, or search for locations online.  
P o s i t i o n i n g  
38  
Downloading maps may involve the transmission of large amounts of data through your  
service provider’s network. Contact your service provider for information about data  
transmission charges.  
To prevent automatic downloading of maps, for example, when outside your home  
network, select Options > Tools > Settings > Internet > Go online at start-up >  
No.  
To define the memory to be used and how much memory space you want to use  
for saving maps or voice guidance files, select Options > Tools > Settings >  
Map > Memory to be used and Maximum memory use. When the memory is full,  
the oldest map data is deleted. The saved maps data can be deleted using Nokia  
Map Loader PC software.  
Nokia Map Loader  
Nokia Map Loader is PC software that you can use to download and install maps  
and extra services from the internet to a compatible memory card. Use the Maps  
application and browse maps at least once before using Nokia Map Loader, as  
Nokia Map Loader uses the Maps history information.  
follow the instructions on the screen.  
Plan a route  
To plan a route, select a location on the map or search for a location, press the  
scroll key, and select Add > To route.  
To add more locations for your route, select Options > Add route point, and search  
for the location.  
To edit the route, press the scroll key, and select Edit route.  
To define the settings for the route, select Options > Settings.  
To show the route on the map, select Options > Show route.  
To navigate to the destination by car or on foot, select Options > Start driving or  
Start walking.  
To save the route, select Options > Save route.  
Activate navigation licence  
Before you can use the navigation feature, you have to activate the licence online  
using an internet access point. To activate the licence for both car and pedestrian  
navigation, select Options > Extras > Drive & Walk, and follow the instructions.  
P o s i t i o n i n g  
39  
Navigate to the destination  
To start navigating, select a location, press the scroll key, and select Drive to or  
Walk to.  
When you use car navigation for the first time, your device may ask you to select  
the language for the voice guidance. To change the language later, in the Maps  
main view, select Options > Tools > Settings > Navigation > Voice guidance.  
Voice guidance is not available for pedestrian navigation.  
To switch between different map views during the navigation, press the scroll key,  
and select Manoeuvre view, Bird’s-eye view, or Arrow view.  
To discard the created route and use another route, select Options > Diff. route.  
To stop navigating, select Options > Stop.  
Extra services for Maps  
Traffic and guide information and related services are generated by third parties  
independent of Nokia. The information may be inaccurate and incomplete to some  
extent and is subject to availability. Never rely solely on the aforementioned  
information and related services.  
Downloading extra services may involve the transmission of large amounts of data through  
your service provider’s network. Contact your service provider for information about data  
transmission charges.  
Traffic information  
The real-time traffic information service is an extra service that provides  
information about events that may affect your travel. You can purchase the  
service and download it to your device if available in your country or region.  
To purchase a licence for the traffic information service, select Options > Extras >  
Traffic info.  
To view information about traffic events, select Options > Traffic info. The events  
are shown on the map as triangles and lines.  
To view details of an event, including possible rerouting options, select the event  
and Options > Open.  
To update the traffic information, select Update traffic info.  
Travel guides  
To purchase and download travel guides, or to view downloaded ones, select  
Options > Extras > Guides.  
P o s i t i o n i n g  
40  
To browse travel guide categories, select a category. If there are subcategories,  
select a subcategory.  
To download a new guide to your device, scroll to the desired guide, and select  
Yes. You can pay for the guides using a credit card or in your phone bill, if  
supported by your service provider.  
Landmarks  
Select > Landmarks. With Landmarks, you can save the position information of  
specific locations to your device. You can use your saved landmarks in compatible  
applications, such as GPS data and Maps. In Maps, saved landmarks are available  
in My places.  
To create a new landmark, select Options > New landmark. To make a positioning  
request for the coordinates of your location, select Current position. To enter the  
position information manually, select Enter manually.  
To add a landmark to preset categories, select the landmark and Options > Add to  
category. Select the categories to which you want to add the landmark.  
To send one or several landmarks to a compatible device, select Options > Send.  
Your received landmarks are placed in Inbox in Messaging.  
GPS data  
GPS data is designed to provide route guidance information to a selected  
destination, position information about your location, and travelling information,  
such as the approximate distance and travel time to the destination.  
Route guidance  
Start the route guidance outdoors. Select > Applications > GPS data >  
Navigation.  
Route guidance shows the straightest route and the shortest distance to the  
destination, measured in a straight line. Any obstacles on the route, such as  
buildings and natural obstacles, are ignored. Differences in altitude are not taken  
into account when calculating the distance. Route guidance is active only when  
you move.  
To set your trip destination, select Options > Set destination and a landmark as  
the destination, or enter the latitude and longitude coordinates. To clear the  
destination, select Stop navigation.  
P o s i t i o n i n g  
41  
Position  
To save your location as a landmark, select > Applications > GPS data >  
Position > Options > Save position.  
Trip meter  
To activate trip distance calculation, select > Applications > GPS data > Trip  
distance > Options > Start. To deactivate it, select Options > Stop. The calculated  
values remain on the display.  
To set the trip distance and time and average and maximum speeds to zero, and to  
start a new calculation, select Reset. To set the odometer and total time to zero,  
select Restart.  
The trip meter has limited accuracy, and rounding errors may occur. Accuracy can also be  
affected by availability and quality of GPS signals.  
8. Gallery  
Main view  
To save and organise your images, video clips, music tracks, sound clips, playlists,  
streaming links, .ram files, and presentations, select > Gallery.  
To copy or move files to device memory or to the memory card, select a folder  
(such as Images), scroll to a file (or press # to mark several files), and select  
Options > Organise and the memory to where you want to copy or move the files.  
To create new image and video clips folders, select Images or Video clips >  
Options > Organise > New folder and the memory. Enter a name for the folder. To  
move images and video clips to a folder you created, mark the files, and select  
Options > Organise > Move to folder and the folder.  
To set an image as the wallpaper or to be shown during a call, select Images, and  
scroll to the image. Select Options > Use image > Set as wallpaper or Set as call  
image. To assign the image to a contact, select Assign to contact.  
To set a video clips as a video ringing tone, select Video clips and the video. Select  
Options > Use video > As ringing tone. To assign the video clips for a contact,  
select Assign to contact.  
G a l l e r y  
42  
Download files  
To download images or video clips, select > Gallery > Images or Video clips and  
the image icon (Dwnl. imgs.) or the video icon (Downld. videos). The browser  
opens. Choose a bookmark for the site to download from.  
View images  
To view images in Gallery, scroll to the image, select Open.  
To open the toolbar when viewing an image, press the scroll key.  
To zoom in or out when viewing an image, press * or #.  
Edit images  
To open the image editor in Gallery, scroll to the image, select Options > Edit.  
To view an image in the full screen, and to return to the normal view, press *.  
To rotate an image clockwise or counterclockwise, press 3 or 1.  
To zoom in or out, press 5 or 0.  
To move on a zoomed image, scroll up, down, left, or right.  
To crop or rotate the image; adjust the brightness, colour, contrast, and  
resolution; and add effects, text, clip art, or a frame to the image, select Options >  
Apply effect.  
Edit video clips  
To edit video clips in Gallery and create custom video clips, scroll to a video clip,  
and select Options > Video editor > Options > Edit video clip.  
In the video editor, you can see two timelines: video clip timeline and sound clip  
timeline. The images, text, and transitions added to a video clip are shown on the  
video clip timeline. To switch between the timelines, scroll up or down.  
Print images  
You can use the device with a PictBridge-compatible printer using a USB cable.  
To print images in Gallery, scroll to the image, and select Options > Print.  
Share online  
With the Share online application, you can share the images and video clips you  
have captured in compatible online albums, weblogs, or other compatible online  
sharing services on the web. You can upload content, save unfinished posts as  
G a l l e r y  
43  
drafts and continue later, and view the content of the albums. The supported  
content types may vary depending on the online sharing service provider.  
To share images and video clips online, you must have an account with an online  
image sharing service. You can usually subscribe to such a service on the web  
page of your service provider. For more information and applicable terms and  
costs, contact your service provider.  
Select > Internet > Share online. To update the list of service providers, select  
Options > Add new account > Update services. Some online sharing service  
providers may allow you to add an account using your device. See “Share online  
settings,” p. 44.  
Upload files  
To upload files, select > Gallery > Images or Video clips. Mark the files to  
upload, and select Options > Send > Post to web and a sharing service.  
When you select the service, the selected images and video clips are shown in the  
edit state. You can open and view the files, reorganise them, add text to them, or  
add new files.  
To cancel the web upload process and save the created post as a draft, select  
Cancel > Save as draft.  
To connect to the service and upload the files to the web, select Options > Post to  
web.  
Open online service  
To view uploaded images and video clips in the online service, and draft and sent  
entries in your device, select > Internet > Share online. To update a service,  
scroll to it, and select Options > Update service.  
Select Options and from the following:  
Go to ... webs. — to connect to the service and view the uploaded and draft albums  
in the web browser. The view may vary depending on the service provider.  
Outbox— to view and edit the draft entries and upload them to the web  
New post — to create a new entry  
The available options may vary depending on the service provider.  
Share online settings  
To edit the share online settings, select > Internet > Share online > Options >  
Settings and from the following:  
G a l l e r y  
44  
Service providers — to view the list of service providers  
My accounts — to create a new account, select Options > Add new account. To  
edit an existing account, select an account and Options > Edit. You can enter the  
name for the account, and the user name and password for the account.  
Application settings — to select the size for the images shown on the display, and  
the font size used in drafts or text entries  
Advanced — to select the default access point and the way for polling new  
content from the server. You can also enable content to be downloaded while  
roaming or all image data to be published.  
9. Camera  
Your device has two cameras to capture still images and record video clips. A high  
resolution main camera is on the back of the device using the landscape mode,  
and a lower resolution secondary camera is on the front using the portrait mode.  
Your device supports an image capture resolution of 2048x1536 pixels using the main  
camera. The image resolution in this guide may appear different.  
Keep a safe distance when using the flash. Do not use the flash on people or animals at close  
range. Do not cover the flash while taking a picture.  
You can send images and video clips in a multimedia message, as an e-mail  
attachment, or by using Bluetooth connectivity. You can also upload them to a  
compatible online album. See “Share online,” p. 43.  
Capture images  
Main camera  
1. To activate the camera, press the camera key.  
2. To zoom in or out, press the volume keys.  
3. To lock the focus on an object,  
press the camera key halfway  
down.  
To capture an image, press the  
camera key down.  
Secondary camera  
1. To activate the secondary camera, press the camera key, scroll left or right to  
open the toolbar, and select  
.
C a m e r a  
45  
2. To zoom in or out, scroll up or down.  
3. To capture an image, select Capture.  
Close the camera  
To close the camera, select Options > Exit.  
If you open the Gallery from the camera, the camera is closed.  
Record video clips  
1. To activate the main camera, press the camera key. To activate the secondary  
camera, scroll left or right to open the toolbar, and select . If the camera is in  
the image mode ( ), scroll left or right to open the toolbar, and select  
.
2. To start recording with the main camera, press the camera key. To start  
recording with the secondary camera, select Record. A tone sounds, indicating  
that recording has started.  
To zoom in or out of the subject using the main camera, press the volume keys,  
or, using the secondary camera, scroll down or up.  
3. To stop recording with the main camera, press the camera key. To stop  
recording with the secondary camera, select Stop. The video clip is  
automatically saved to the Video clips folder in the Gallery. See “Gallery,” p. 42.  
The maximum length of the video clip depends on the available memory.  
To pause recording at any time, select Pause. Video recording automatically stops  
if recording is paused and there are no keypresses within a minute. To resume  
recording, select Continue.  
Capture panoramic images  
To activate the panorama mode with the main camera, scroll left or right to  
activate the toolbar, and select  
.
To start capturing a panoramic image, press the camera key, and turn the camera  
slowly left or right. The camera captures the panoramic image and displays it as  
you turn. If the arrow on the viewfinder turns red, you are turning too fast and the  
image gets blurry. You cannot change the direction while turning. To stop  
capturing the image, press the camera key.  
C a m e r a  
46  
10. Media  
Music player  
Warning: Listen to music at a moderate level. Continuous exposure to high volume  
may damage your hearing. Do not hold the device near your ear when the  
loudspeaker is in use, because the volume may be extremely loud.  
You can listen to music and podcast episodes also when the Offline profile is  
activated. See “Offline profile,” p. 14.  
For more information about copyright protection, see “Licences,” p. 64.  
Listen to music or a podcast episode  
1. Select > Applications > Music player.  
2. Select a category, such as All songs or Podcasts > All episodes, and a song or a  
podcast episode.  
3. To play the selected file, press the scroll key.  
To pause, press the scroll key. To resume the playback, press the scroll key  
again.  
4. To stop the playback, scroll down.  
To fast forward or rewind, press and hold the scroll key right or left.  
To skip forward, scroll right. To return to the beginning of the song or podcast,  
scroll left.  
To skip to the previous song or podcast, scroll left again within 2 seconds after a  
song or podcast has started.  
To adjust the volume, use the volume keys.  
To return to the standby mode and leave the player in the background, press the  
end key. Depending on the selected standby theme, the currently playing song is  
displayed. To return to the music player, select the currently playing song.  
Music menu  
Select > Applications > Music player. The music menu shows the available  
music. To view all songs, sorted songs, or playlists, select the desired list in the  
music menu.  
M e d i a  
47  
Playlists  
Select > Applications > Music player > Playlists. To view details of a playlist,  
scroll to the playlist, and select Options > Playlist details.  
Create a playlist  
1. Select Options > Create playlist.  
2. Enter a name for the playlist, and select OK.  
3. To add songs now, select Yes. To add songs later, select No.  
4. Select artists to find the songs you want to include in the playlist. To add a  
song, press the scroll key.  
5. When you have made your selections, select Done. If a compatible memory  
card is inserted, the playlist is saved to the memory card.  
To add more songs later, when viewing the playlist, select Options > Add songs.  
Podcasts  
To view all the podcast episodes available in your device, select  
>
Applications > Music player > Podcasts > All episodes.  
The podcast episodes have three states: never played, partially played, and  
completely played. If an episode is partially played, it plays from the last playback  
position the next time it is played. Otherwise, it is played from the beginning.  
Nokia Music Store  
In the Nokia Music Store (network service) you can search, browse, and purchase  
music for downloading to your device. To purchase music, you first need to  
register for the service. For availability of Nokia Music Store in your country, visit  
To access the Nokia Music Store, you must have a valid internet access point in  
your device. To open Nokia Music Store, select > Applications > Music player >  
Options > Go to Music store.  
Transfer music  
You can buy music protected with WMDRM from online music shops and transfer  
the music to your device.  
To refresh the library after you have updated the song selection in your device,  
select > Applications > Music player > Options > Refresh library.  
M e d i a  
48  
Transfer music from PC  
To synchronise music with Windows Media Player, connect the compatible USB  
cable and select Media transfer as the connection mode. You can transfer  
WMDRM protected music files only using media transfer. A compatible memory  
card needs to be inserted in the device.  
To use Nokia Music Manager in Nokia PC Suite, see the Nokia PC Suite user guide.  
Nokia Podcasting  
With the Nokia Podcasting application (network service), you can search, discover,  
subscribe to, and download podcasts over the air, and play, manage, and share  
audio podcasts with your device.  
Warning: Listen to music at a moderate level. Continuous exposure to high volume  
may damage your hearing. Do not hold the device near your ear when the  
loudspeaker is in use, because the volume may be extremely loud.  
Settings  
To use Nokia Podcasting, you must set your connection and download settings.  
Setting the application to retrieve podcasts automatically may involve the transmission of  
large amounts of data through your service provider's network. Contact your service  
provider for information about data transmission charges.  
Select > Applications > Podcasting > Options > Settings and from the  
following:  
Connection > Default access point — to select the access point to define your  
connection to the internet. To define the podcast search service for searches,  
select Search service URL.  
Download — to edit the download settings. You can select whether to save your  
podcasts to the device or the memory card; set how often podcasts are updated  
and set the time and date for the next automatic update; and set how much  
memory space to use for podcasts, and what to do if the downloads exceed the  
download limit.  
Search  
To set the search engine to use the podcast search service, select  
>
Applications > Podcasting > Options > Settings > Connection > Search service  
URL.  
To search for podcasts, select > Applications > Podcasting > Search, and enter  
a keyword or a title.  
M e d i a  
49  
To subscribe to a channel and add it to your podcasts, select Options > Subscribe.  
You can also mark channels to add them all at the same time.  
Directories  
Directories help you to find new podcast episodes to which to subscribe. An  
episode is a particular media file of a podcast.  
Select > Applications > Podcasting > Directories. Select a directory folder to  
update it (network service). When the colour of the folder icon changes, select to  
open it, and select a folder topic to view the list of podcasts.  
To subscribe to a podcast, select the title. After you have subscribed to episodes of  
a podcast, you can download, manage, and play them in the podcasts menu.  
To add a new directory or folder, select Options > New > Web directory or Folder.  
Select a title, URL of the .opml (outline processor markup language) file, and Done.  
To import an .opml file saved in your device, select Options > Import OPML file.  
Select the location of the file, and import it.  
When you receive a message with an .opml file using Bluetooth connectivity, open  
the file and save it to the Received folder in Directories. Open the folder to  
subscribe to any of the links to add to your podcasts.  
Downloads  
To view the podcasts you have subscribed to, select > Applications >  
Podcasting > Podcasts. To view individual episode titles, select the podcast title.  
To start a download, select the episode title. To download or to continue to  
download selected or marked episodes, select Options > Download or Continue  
download. You can download multiple episodes at the same time.  
To play a portion of a podcast during download or after partial downloading,  
select Podcasts and the podcast, scroll to the episode being downloaded, and  
select Options > Play preview.  
Fully downloaded podcasts are saved in the Podcasts folder in Music player when  
the music library is refreshed.  
Play and manage podcasts  
To display the episodes from a podcast, open the podcast. Under each episode, you  
can see the file information.  
To play a fully downloaded episode, select > Applications > Music player >  
Podcasts.  
M e d i a  
50  
To update the selected podcast or marked podcasts, for a new episode, select  
Options > Update.  
To add a new podcast by entering the URL of the podcast, select Options > New  
podcast. To edit the URL of a selected podcast, select Edit.  
To update, delete, and send a group of selected podcasts at once, select Options >  
Mark/Unmark, mark the podcasts, and select Options and the desired action.  
To open the website of the podcast (network service), select Options > Open web  
page.  
Some podcasts provide the opportunity to interact with the creators by  
commenting and voting. To connect to the internet to do this, select Options >  
View comments.  
Radio  
To turn on the radio, select > Applications > Radio. To turn the radio off, select  
Exit.  
When you turn on the radio for the first time, a wizard helps you to save local  
radio stations (network service).  
For availability and costs of the visual service and station directory services,  
contact your service provider.  
The FM radio depends on an antenna other than the wireless device antenna. A compatible  
headset or enhancement needs to be attached to the device for the FM radio to function  
properly.  
Warning: Listen to music at a moderate level. Continuous exposure to high volume  
may damage your hearing. Do not hold the device near your ear when the  
loudspeaker is in use, because the volume may be extremely loud.  
The radio supports Radio Data System (RDS) functionality. Radio stations  
supporting RDS may display information, such as the name of the station. If  
activated in the settings, RDS also attempts to scan for an alternative frequency  
for the currently playing station, if the reception is weak. To set your device  
automatically search for alternative frequencies, select Options > Settings >  
Alternative frequencies > Auto scan on.  
Tune and save a radio station  
To start the station search when the radio is on, scroll up or down. To save the  
station when a station is found, select Options > Save station. Select a location  
for the station, enter the name for it, and select OK.  
M e d i a  
51  
To view the list of saved stations, select Options > Stations. To change the  
settings of a station, select the station and Edit.  
Radio functions  
To adjust the volume, press the volume keys.  
If there are any saved stations, scroll right or left to the next or previous stations.  
You can make or answer a call while listening to the radio. The radio is muted  
when there is an active call.  
To listen to the radio in the background and go to the standby mode, select  
Options > Play in background.  
View visual content  
For availability and costs, and to subscribe to the service, contact your service  
provider.  
To view visual content of the current station, select Options > Start visual service.  
Station needs to have visual service ID saved before service can be used.  
To end the visual content feed but continue listening to the radio, select Close.  
Station directory  
To access the station directory (network service), select Options > Station  
directory and your location. Radio stations that provide visual content are  
indicated with . To listen to or save a station, scroll to it, and select Options >  
Listen or Save.  
RealPlayer  
With RealPlayer, you can play media files such as video clips saved in the device  
memory or memory card, or stream media files over the air by opening a streaming  
link. RealPlayer does not support all file formats or all the variations of file  
formats.  
Select > Applications > RealPlayer. To play, select Video clips, Streaming links,  
or Recently played and a media file or a streaming link.  
To stream live content, you must first configure your default access point. Select  
> Applications > RealPlayer > Options > Settings > Streaming > Network. For  
more information, contact your service provider.  
Warning: Do not hold the device near your ear when the loudspeaker is in use,  
because the volume may be extremely loud.  
M e d i a  
52  
Flash Player  
To view, play, and interact with flash files made for mobile devices, select  
>
Applications > Flash Player. To open a folder or play a flash file, select it.  
Recorder  
With voice recorder, you can record voice call conversations and voice memos. If  
you record a phone conversation, all parties hear a beeping sound during  
recording.  
Select > Applications > Recorder. To record a sound clip, select Options >  
Record sound clip, or select . To listen to the recording, select . Recorded  
files are saved in the Sound clips folder in Gallery.  
11. Internet  
Browse the web  
To browse web pages, select > Internet > Web, or press and hold 0 in the  
standby mode.  
For availability of services, pricing, and tariffs, contact your service provider.  
Important: Use only services that you trust and that offer adequate security and  
protection against harmful software.  
To access web pages, do one of the following:  
• Select a bookmark from the bookmarks view.  
• In the bookmarks view, enter the address of the web page, and select Go to.  
Bookmarks  
To add a bookmark manually, in the bookmarks view, select Options > Bookmark  
manager > Add bookmark, fill in the fields, and select Options > Save.  
Connection security  
If the security indicator is displayed during a connection, the data transmission  
between the device and the internet gateway or server is encrypted.  
The security icon does not indicate that the data transmission between the gateway and the  
content server (or place where the requested resource is stored) is secure. The service  
provider secures the data transmission between the gateway and the content server.  
To view details about the connection, encryption status, and information about  
server authentication, select Options > Tools > Page info.  
I n t e r n e t  
53  
Keys and commands for browsing  
To open a link, make selections, or check boxes, press the scroll key.  
To go to the previous page while browsing, select Back. If Back is not available, to  
view a chronological list of the pages visited during a browsing session, select  
Options > Navigation options > History. Scroll left or right, and select the desired  
page. The history list is cleared each time a session is closed.  
To save a bookmark while browsing, select Options > Save as bookmark.  
To retrieve the latest content from the server, select Options > Navigation  
options > Reload.  
To open the browser toolbar, scroll to an empty part of the page, and press and  
hold the scroll key.  
To end the connection and view the browser page offline, select Options > Tools >  
Disconnect. To stop browsing, select Options > Exit.  
Keypad shortcuts while browsing  
1 — Open your bookmarks.  
2 — Search for keywords in the current page.  
3 — Return to the previous page.  
5 — List all open windows.  
8 — Show the page overview of the current page. Press 8 again to zoom in and  
view the desired section of the page.  
9 — Enter a new web address.  
0 — Go to the start page.  
* or # — Zoom the page in or out.  
Mini map  
Mini map helps you navigate web pages that contain large amount of  
information. When Mini map is on in the browser settings and you scroll through  
a large web page, Mini map opens and displays an overview of the web page you  
are browsing. To move in Mini map, scroll. When you stop scrolling, Mini map  
disappears and the area outlined in Mini map is displayed.  
Page overview  
With Page overview, you can move more quickly to the desired part of a web page.  
Page overview may not be available on all pages.  
I n t e r n e t  
54  
To show the page overview of the current page, press 8. To find the desired spot on  
the page, scroll up or down. Press 8 again to zoom in and view the desired section  
of the page.  
Web feeds  
Web feeds are widely used to share the latest headlines or recent news.  
The browser automatically detects if a web page contains web feeds. To subscribe  
to a web feed, select Options > Subscribe to web feeds and a feed, or click on the  
link. To view the web feeds you have subscribed to, in the bookmarks view, select  
Web feeds.  
To update a web feed, select it, and Options > Refresh.  
To define how the web feeds are updated, select Options > Settings > Web feeds.  
Widgets  
Your device supports widgets. Widgets are small, downloadable web applications  
that deliver multimedia, news feeds, and other information, such as weather  
reports, to your device. Installed widgets appear as separate applications in the  
My own folder in Applications.  
You can download widgets using the Download! application or from the web.  
The default access point for widgets is the same as in the web browser. When  
active in the background, some widgets may update information automatically to  
your device. Using widgets may involve the transmission of large amounts of data  
through your service provider's network. Contact your service provider for  
information about data transmission charges.  
Saved pages  
To save a page while browsing to be able to view it offline, select Options >  
Tools > Save page.  
To view saved pages, in the bookmarks view, select Saved pages. To open a page,  
select it.  
Clear privacy data  
A cache is a memory location that is used to store data temporarily. If you have tried to  
access or have accessed confidential information requiring passwords, empty the cache  
after each use. The information or services you have accessed are stored in the cache. To  
empty the cache, select Options > Clear privacy data > Cache.  
To clear all privacy data, select Options > Clear privacy data > All.  
I n t e r n e t  
55  
Search  
Use Search to get access to search engines, and find and connect to local services,  
websites, images, and mobile content (network service). For example, you can use  
the application to find local restaurants and shops. You can also search for data in  
your device and memory card.  
Select > Internet > Search.  
12. Personalisation  
Themes  
To change the look of your device display, activate a theme.  
Select > Settings > Themes. To view the available themes, select General. The  
active theme is indicated by a check mark.  
To preview a theme, scroll to the theme, and select Options > Preview. To activate  
the previewed theme, select Set.  
In Themes, you can also set the menu view type, set a theme for the standby mode,  
set a custom wallpaper, personalise the look of the power saver, and select an  
image shown during a call.  
Profiles  
In Profiles, you can adjust and personalise the device tones for different events,  
environments, or caller groups. You can see the selected profile at the top of the  
display in the standby mode. If the General profile is in use, only the current date  
is shown.  
Select > Settings > Profiles.  
To activate the profile, select the profile and Activate.  
Tip: To quickly change to silent profile from any other profile, in the  
standby mode, press and hold #.  
To personalise a profile, select the profile, Personalise, and the desired settings.  
To set the profile to be active until a certain time within the next 24 hours, select  
Timed and the time.  
See also “Offline profile,” p. 14.  
P e r s o n a l i s a t i o n  
56  
13. Time management  
Clock  
Select > Office > Clock. To change the clock settings, and to set the time and  
date, select Options > Settings.  
To set the device to show the time in other locations, scroll right to World clock. To  
add a location, select Options > Add location.  
To set your current location, scroll to a location, and select Options > Set as  
current location. The location is displayed in the clock main view, and the time in  
your device is changed according to the location selected. Check that the time is  
correct and matches your time zone.  
Alarm clock  
To set a new alarm, scroll right to Alarms, and select Options > New alarm. Enter  
the alarm time, select whether and when the alarm is repeated, and select Done.  
Calendar  
Select > Office > Calendar. Press # in month, week, or day views to  
automatically highlight the current date.  
To add a new calendar entry, select Options > New entry and an entry type.  
Anniversary entries are repeated every year. To-do entries help you to keep a list of  
tasks that you need to do. Fill in the fields, and select Done.  
14. Office applications  
Active notes  
Active notes allows you to create, edit, and view different kinds of notes. You can  
insert images and videos or sound clips in the notes, link notes to other  
applications, such as Contacts, and send notes to others.  
Select > Office > Active notes.  
To create a note, start writing. To insert images, sound or video clips, business  
cards, web bookmarks, or files, select Options > Insert object and the type of item.  
To set the device to show a note when making or receiving a call from a contact,  
select Options > Settings. To link a note to a contact, open the note, and select  
Options > Link note to call > Add contacts and the contact.  
T i m e m a n a g e m e n t  
57  
Notes  
Select > Office > Notes.  
To write a new note, start writing. To save the note, select Done.  
You can save plain text files (.txt format) you receive to Notes.  
Calculator  
Select > Office > Calculator. When entering numbers, to add a decimal point,  
press #.  
Note: This calculator has limited accuracy and is designed for simple calculations.  
Converter  
Select > Office > Converter. You can convert measurements, such as length  
from one unit to another, for example, from yards to metres.  
The converter has limited accuracy and rounding errors may occur.  
Before you can convert currency, you need to choose a base currency (usually your  
domestic currency) and add exchange rates. The rate of the base currency is  
always 1. Select Currency as the measurement type, and select Options >  
Currency rates. To change the base currency, scroll to the currency, and select  
Options > Set as base currency. To add exchange rates, scroll to the currency, and  
enter a new rate.  
After you insert all the required exchange rates, you can convert currency. In the  
first amount field, enter the value to be converted. The other amount field  
changes automatically.  
Note: When you change base currency, you must enter new exchange rates  
because all previously set exchange rates are cleared.  
Mobile dictionary  
Use Dictionary to translate words from one language to another.  
Select > Office > Dictionary. English is available by default in your device. You  
can add two more languages. To add a language, select Options > Languages >  
Download languages. You can remove languages except English and add new  
ones. The languages are free of charge, but downloading may involve the  
transmission of large amounts of data through your service provider's network.  
Contact your service provider for information about data transmission charges.  
O f f i c e a p p l i c a t i o n s  
58  
The display shows abbreviations for source and target languages. To change the  
source and target language, select Options > Languages > Source and Target.  
Enter the word to be translated, and select Translate. To hear the word spoken,  
select Listen.  
Adobe Reader  
Use Adobe Reader to view portable document format (.pdf) documents. To open  
the application, select > Office > Adobe PDF.  
Open a .pdf file  
To open a recently viewed document, select it. To open a document that is not  
listed in the main view, select Options > Browse for file, the memory and folder  
where the file is stored and the file.  
View a document  
To move around within a page, scroll. To move to the next page, scroll down at the  
bottom of the page.  
To zoom in or out, select Options > Zoom > In or Out.  
To find text, select Options > Find > Text, and enter the text you want to find. To  
find the next occurrence, select Options > Find > Next.  
To save a copy of the document, select Options > Save.  
Quickoffice  
To use the Quickoffice applications, select > Office > Quickoffice.  
Not all variations or features of Word, Excel, and PowerPoint file formats are  
supported.  
If you experience problems with the Quickoffice applications, see  
Quickmanager  
With Quickmanager, you can download software, including updates, upgrades,  
and other useful applications. You can pay for the downloads in your phone bill or  
using a credit card.  
O f f i c e a p p l i c a t i o n s  
59  
15. Settings  
Voice commands  
To select the functions to use by voice command, select > Settings > Voice  
comm.. The voice commands for changing profiles are in the Profiles folder.  
To change the voice command for an application, scroll to the application, and  
select Edit, or Options > Change command. To play the activated voice command,  
select Options > Playback.  
To use voice commands, see “Voice dialling,” p. 21.  
Phone settings  
General  
Select > Settings > Phone sett. > General and from the following:  
Personalisation — to adjust the display, standby mode, tones (such as ringing  
tone), language, themes, and voice command settings  
Date and time — to set the time and date and the display format  
Enhancement — to change the settings for an enhancement. Select an  
enhancement and the desired setting.  
Slide handling — to edit the slide settings. See “Keypad lock (keyguard),” p. 17,  
“Make a voice call,” p. 20, and “Answer or reject a call,” p. 22.  
Sensor settings — to set which functions the accelerometer controls in your device  
and activate specific sensor interactions. See “Motion sensor,” p. 17.  
Security — to change the device and SIM card settings, such as PIN and lock  
codes; view certificate details and check authenticity; and view and edit security  
modules  
When security features that restrict calls are in use (such as call barring, closed user group,  
and fixed dialing), calls may be possible to the official emergency number programmed into  
your device.  
Factory settings — to reset some of the settings to their original values. You need  
the lock code.  
Positioning (network service) — to change positioning settings. See “Positioning  
settings,” p. 34.  
S e t t i n g s  
60  
Phone  
See “Call settings,” p. 23.  
Connection  
Select > Settings > Phone sett. > Connection and from the following:  
Bluetooth — to switch Bluetooth technology on or off, and edit Bluetooth  
settings. See “Bluetooth connection settings,” p. 68.  
USB — to edit USB settings. See “USB connection,” p. 69.  
Destinations — to define the connection methods used for reaching a particular  
destination  
Packet data — to select the packet data connection settings. The packet data  
settings affect all access points using a packet data connection.  
• To set the device to register to the packet data network when you are in a  
network that supports packet data, select Packet data connection > When  
available. If you select When needed, the device uses a packet data  
connection only if you start an application or function that needs it.  
• To set the access point name to use your device as a modem with your  
computer, select Access point.  
• To enable the use of HSDPA (network service) in UMTS networks, select  
High speed packet access. When HSDPA support is activated, downloading  
data such as messages, e-mail, and browser pages through the cellular  
network may be faster.  
Data call — to set the online time for the data call connection. The data call  
settings affect all access points that use a GSM data call.  
Video sharing — to set your SIP profile settings manually. See “Video sharing  
settings,” p. 25.  
Presence (network service) — to view and edit the presence settings. Connection  
applications, such as push to talk, use the presence settings. You may receive the  
settings from your service provider.  
SIP settings — to view and edit session initiation protocol (SIP) profiles. See “Video  
sharing,” p. 25.  
XDM profile — to create or edit an XDM profile. Settings are for communication  
applications, such as presence and push to talk. These enable the service provider  
to access some user information that is saved in the network servers but managed  
S e t t i n g s  
61  
by the user, for example push to talk groups. You may receive the settings from  
your service provider. See “Configuration settings,” p. 11.  
Configurations — to view and delete configuration contexts. Certain functions,  
such as web browsing and multimedia messaging, may require configuration  
settings. You may receive the settings from your service provider. See  
“Configuration settings,” p. 11.  
APN control — to restrict the use of packet data access points. This setting is only  
available if your SIM card supports the service. To change the settings, you need  
the PIN2 code.  
Applications  
To view and edit settings of applications installed to your device, select  
>
Settings > Phone sett. > Applications.  
Speech  
In Speech, you can select the default language and voice used for reading text  
messages and adjust the voice properties, such as rate and volume. Select  
>
Settings > Speech.  
To view details of a voice, scroll right, scroll to the voice, and select Options >  
Voice details. To test a voice, scroll to the voice, and select Options > Play voice.  
16. Data management  
Install or remove applications  
You can install two types of applications to your device:  
• J2METM applications based on JavaTM technology with the extension .jad or .jar.  
PersonalJavaTM applications cannot be installed to your device.  
• Other applications and software suitable for the Symbian operating system.  
The installation files have the .sis or .sisx extension. Only install software  
specifically designed for your device.  
Important: Only install and use applications and other software from trusted  
sources, such as applications that are Symbian Signed or have passed the Java  
VerifiedTM testing.  
Installation files may be transferred to your device from a compatible computer,  
downloaded during browsing, or sent to you in a multimedia message, as an  
e-mail attachment or by using Bluetooth technology. You can use Nokia  
D a t a m a n a g e m e n t  
62  
Application Installer in Nokia PC Suite to install an application to your device or a  
memory card.  
To find installed applications, select > Applications > My own.  
To open Application manager, select > Settings > Data mgr. > App. mgr..  
Install an application  
The .jar file is required for installing Java applications. If it is missing, the device  
may ask you to download it.  
1. To install an application or software package, select Installation files, and  
scroll to an installation file. Applications on the memory card are indicated  
with  
.
2. Select Options > Install.  
Alternatively, search the device memory or the memory card, select the  
application, and press the scroll key to start the installation.  
During the installation, the device shows information about the progress of the  
installation. If you are installing an application without a digital signature or  
certification, the device displays a warning. Continue installation only if you  
are sure of the origins and contents of the application.  
Important: Even if the use of certificates makes the risks involved in remote  
connections and software installation considerably smaller, they must be used  
correctly in order to benefit from increased security. The existence of a certificate  
does not offer any protection by itself; the certificate manager must contain  
correct, authentic, or trusted certificates for increased security to be available.  
Certificates have a restricted lifetime. If "Expired certificate" or "Certificate not  
valid yet" is shown, even if the certificate should be valid, check that the current  
date and time in your device are correct.  
Before changing any certificate settings, you must make sure that you really trust  
the owner of the certificate and that the certificate really belongs to the listed  
owner.  
Java applications may attempt to, for example, establish a data connection or  
send a message. To edit the permissions of an installed Java application and define  
which access point the application will use, select Installed apps., scroll to the  
application, and select Open.  
After you install applications to a compatible memory card, installation files (.sis) remain in  
the device memory. The files may use large amounts of memory and prevent you from  
storing other files. To maintain sufficient memory, use Nokia PC Suite to back up installation  
files to a compatible PC, then use the file manager to remove the installation files from the  
D a t a m a n a g e m e n t  
63  
device memory. See “File manager,” p. 64. If the .sis file is a message attachment, delete the  
message from the Messaging inbox.  
Remove an application  
In the Application manager main view, select Installed apps., scroll to the software  
package, and select Options > Uninstall.  
File manager  
To browse, open, and manage files and folders in the device memory or on a  
memory card, select > Office > File mgr..  
Back up and restore device memory  
To back up information from device memory to the memory card or restore  
information from the memory card, in File manager, select Options > Back up  
phone memory or Restore from mem. card. You can only back up the device  
memory and restore it to the same device.  
Format a memory card  
When a memory card is formatted, all data on the card is permanently lost. Some  
memory cards are supplied preformatted and others require formatting.  
1. In the File manager view, select the memory card.  
2. Select Options > Memory card options > Format.  
3. When formatting is complete, enter a name for the memory card.  
Lock or unlock a memory card  
To set a password to help prevent unauthorised use, in the File manager view,  
select the memory card and Options > Memory card password > Set. Enter and  
confirm your password. The password can be up to eight characters long.  
If you insert another password-protected memory card into your device, you are  
prompted to enter the password of the card. To unlock the card, select Options >  
Unlock memory card.  
Licences  
Digital rights management  
Content owners may use different types of digital rights management (DRM) technologies  
to protect their intellectual property, including copyrights. This device uses various types of  
DRM software to access DRM-protected content. With this device you can access content  
protected with WMDRM, OMA DRM 1.0, and OMA DRM 2.0. If certain DRM software fails to  
D a t a m a n a g e m e n t  
64  
protect the content, content owners may ask that such DRM software's ability to access new  
DRM-protected content be revoked. Revocation may also prevent renewal of such DRM-  
protected content already in your device. Revocation of such DRM software does not affect  
the use of content protected with other types of DRM or the use of non-DRM-protected  
content.  
Digital rights management (DRM) protected content comes with an associated activation  
key that defines your rights to use the content.  
If your device has OMA DRM-protected content, to back up both the licences and the  
content, use the backup feature of Nokia PC Suite. Other transfer methods may not transfer  
the licences which need to be restored with the content for you to be able to continue the  
use of OMA DRM protected content after the device memory is formatted. You may also  
need to restore the licences in case the files on your device get corrupted.  
If your device has WMDRM protected content, both the licences and the content will be lost  
if the device memory is formatted. You may also lose the licences and the content if the files  
on your device get corrupted. Losing the licences or the content may limit your ability to use  
the same content on your device again. For more information, contact your service provider.  
Some licences may be connected to a specific SIM card, and the protected content can be  
accessed only if the SIM card is inserted in the device.  
To view the licences saved in your device, select > Settings > Data mgr. >  
Licences.  
To view valid licences that are connected to one or more media files, select Valid  
licences. Group licences, which contain several licences, are indicated with  
. To  
view the licences contained in the group licence, select the group licence.  
To view invalid licences for which the time period for using the file has exceeded,  
select Invalid licences. To buy more usage time or extend the usage period for a  
media file, select an invalid licence and Options > Get new licence. It may not be  
possible to update licences if service message reception is disabled.  
To view licences that are not in use, select Not in use. Unused licenses have no  
media files connected to them.  
To view detailed information such as the validity status and the ability to send the  
file, scroll to a licence, and select it.  
Device manager  
With device manager you can connect to a server and receive configuration  
settings for your device, create new server profiles, or view and manage existing  
server profiles. You may receive configuration settings from your service provider  
or company information management department.  
D a t a m a n a g e m e n t  
65  
To open the device manager, select > Settings > Data mgr. > Device mgr..  
Update software  
Warning: If you install a software update, you cannot use the device, even to make  
emergency calls, until the installation is completed and the device is restarted. Be  
sure to back up data before accepting installation of an update.  
Downloading software updates may involve the transmission of large amounts of data  
through your service provider's network. Contact your service provider for information about  
data transmission charges.  
Make sure that the device battery has enough power, or connect the charger before starting  
the update.  
1. Select Options > Check for updates. If an update is available, accept to  
download it.  
2. After a successful download, to install the update, select Now. To start the  
installation later, select Later.  
To start the installation process later, select Options > Install update.  
If no server profile has been defined, the device asks you to create one, or if there  
are several, to select from a list of servers. For server profile settings, contact your  
service provider.  
Configure your device  
You may receive configuration settings from your service provider or company  
information management department.  
To connect to a server and receive configuration settings for your device, select  
Options > Server profiles, scroll to the server profile, and select Options > Start  
configuration.  
To edit a server profile, scroll to the profile, and select Options > Edit profile.  
For the server profile settings, contact your service provider or company  
information management department.  
17. Connectivity  
Transfer or synchronise data  
With Phone switch, you can copy or synchronise contacts, calendar entries, and  
possibly other data, such as video clips and images, from a compatible device  
using a Bluetooth connection.  
C o n n e c t i v i t y  
66  
Depending on the other device, synchronisation may not be possible and data can  
be copied only once.  
1. To transfer or synchronise data, select > Settings > Connectivity > Switch.  
If you have not used Phone switch before, information about the application is  
displayed. To start transferring data, select Continue.  
If you have used Phone switch, select the icon Start sync, Start retrieving or  
Start sending.  
2. When using Bluetooth technology, the devices need to be paired to transfer  
data.  
Depending on the type of the other device, an application may be sent and  
installed on the other device to enable the data transfer. Follow the  
instructions on the display.  
3. Select what content you want to transfer to your device.  
4. Content is transferred to your device. The transfer time depends on the amount  
of data. You can stop the transfer and continue later.  
PC Suite  
With PC Suite you can synchronise contacts, calendar entries, and notes between  
your device and a compatible PC.  
You may find more information about PC Suite and the download link in the  
Bluetooth connectivity  
Bluetooth wireless technology enables wireless connections between electronic  
devices within a maximum range of 10 metres (33 feet).  
This device is compliant with Bluetooth Specification 2.0 supporting the following profiles:  
Advanced Audio Distribution, Audio/Video Remote Control, Basic Imaging, Dial-Up  
Networking, File Transfer, Hands-free, Headset, Object Push, Serial Port, Phone Book Access,  
SIM Access, Generic Audio/Video Distribution, Generic Access, and Generic Object Exchange.  
To ensure interoperability between other devices supporting Bluetooth technology, use  
Nokia approved enhancements for this model. Check with the manufacturers of other  
devices to determine their compatibility with this device.  
Features using Bluetooth technology, or allowing such features to run in the background  
while using other features, increase the demand on battery power and reduce the battery  
life.  
Do not accept Bluetooth connections from sources you do not trust.  
C o n n e c t i v i t y  
67  
A Bluetooth connection is disconnected automatically after sending or receiving  
data.  
Bluetooth connection settings  
Select > Settings > Connectivity > Bluetooth.  
Bluetooth — to switch Bluetooth connectivity on or off  
My phone's visibility — to allow your device to be found by other devices with  
Bluetooth connectivity at all times, select Shown to all. To allow your device to be  
found for a defined time period, select Define period. For security reasons it is  
advisable to use the Hidden setting whenever possible.  
My phone's name — to define a name for your device  
Remote SIM mode — to enable another device, for example, a car kit, to use the  
SIM card of your device using Bluetooth technology (SIM access profile)  
When the wireless device is in the remote SIM mode, you can only use a compatible  
connected enhancement, such as a car kit, to make or receive calls. Your wireless device will  
not make any calls, except to the emergency numbers programmed into your device, while in  
this mode. To make calls from your device, you must first leave the remote SIM mode. If the  
device has been locked, enter the lock code to unlock it first.  
Send data  
1. Open the application where the item you want to send is saved.  
2. Scroll to the item you want to send, and select Options > Send > Via  
Bluetooth.  
3. The device starts to search for devices within range. Paired devices are shown  
with . Some devices may show only the unique device addresses. To find out  
the unique address of your device, enter the code *#2820# in the standby  
mode.  
If you have searched for devices earlier, a list of devices found previously is  
shown. To start a new search, select More devices.  
4. Select the device with which you want to connect.  
5. If the other device requires pairing before data can be transmitted, a tone  
sounds and you are asked to enter a passcode. Create your own passcode and  
share the passcode with the owner of the other device. You do not have to  
memorise the passcode.  
C o n n e c t i v i t y  
68  
Pair and block devices  
To open a list of paired devices, in the Bluetooth view, scroll right to Paired  
devices.  
To pair with a device, select Options > New paired device, select the device with  
which to pair, and exchange passcodes.  
To cancel pairing, scroll to the device whose pairing you want to cancel, and press  
the clear key. If you want to cancel all pairings, select Options > Delete all.  
To set a device to be authorised, scroll to the device, and select Options > Set as  
authorised. Connections between your device and an authorised device can be  
made without your knowledge. Use this status only for your own devices to which  
others do not have access, for example, your PC or devices that belong to someone  
you trust. is added next to authorised devices in the paired devices view.  
To block connections from a device, in the paired devices view, select the device  
and Block.  
To view a list of blocked devices, scroll right to Blocked devices. To unblock a  
device, scroll to the device, and select Delete.  
Receive data  
When you receive data using Bluetooth technology, you are asked if you want to  
accept the message. If you accept, the item is placed in inbox in Messaging.  
USB connection  
Connect the USB data cable to establish a data connection between the device  
and a compatible PC.  
Select > Settings > Connectivity > USB and from the following:  
USB connection mode — to select the default USB connection mode or change the  
active mode. Select PC Suite to use the device with Nokia PC Suite; Mass storage  
to access files on the inserted memory card as a mass storage device; Image  
transfer to use the device with a PictBridge-compatible printer, or Media transfer  
to synchronise media files, such as music, with a compatible version of Windows  
Media Player.  
Ask on connection — to set the device to ask the purpose of the connection each  
time the cable is connected, select Yes. To set the default mode to be activated  
automatically, select No.  
After transferring data, ensure that it is safe to unplug the USB data cable from  
the PC.  
C o n n e c t i v i t y  
69  
Remote synchronisation  
Sync enables you to synchronise data such as your calendar entries, contacts, and  
notes with a compatible computer or a remote internet server.  
Select > Settings > Connectivity > Sync.  
To create a new profile, select Options > New sync profile and enter the required  
settings.  
To synchronise data, in the main view, mark the data to be synchronised, and  
select Options > Synchronise.  
Push to talk  
Push to talk (PTT) (network service) is a real-time voice over IP service (network  
service). PTT provides direct voice communication connected with a single  
keypress. In PTT communication, one person talks while the others listen. The  
length of time of each turn is limited.  
For availability, costs and subscribtion to the service, contact your service  
provider. Note that roaming services may be more limited than home network  
services.  
Before you can use the PTT service, you must define the PTT connection settings.  
For PTT service settings, contact your service provider.  
Phone calls always take priority over PTT calls.  
Select > Applications > PTT.  
Log in to PTT  
To log in manually, select Options > Log in to PTT.  
indicates a PTT connection.  
indicates that PTT is set to do not disturb (DND).  
Exit PTT  
Select Options > Exit. Log out from PTT after exiting application? is displayed. To  
log out, select Yes. To keep PTT active in the background, select No.  
Make a one-to-one call  
Warning: Do not hold the device near your ear when the loudspeaker is in use,  
because the volume may be extremely loud.  
1. Select Options > PTT contacts > Contacts, scroll to the contact you want to  
talk to, and press the call key.  
C o n n e c t i v i t y  
70  
2. When the connection has been established, to talk to the other participant,  
press and hold the call key while you talk.  
3. To end the PTT call, select Disconnect, or, if there are several PTT calls, select  
Options > Disconnect.  
Make a PTT group call  
To call a group, select Options > PTT contacts > Contacts > Options > Talk to  
many, mark the contacts you want to call, and select OK.  
PTT sessions  
PTT sessions are displayed as call bubbles in the PTT display, giving information  
about the status of the PTT sessions:  
Wait — shown when you press and hold the call key and somebody else is still  
speaking in the PTT session  
Talk — shown when you press and hold the call key and get the permission to  
speak  
Send a callback request  
To send a callback request from Contacts, scroll to a contact, and select Options >  
Send callback request.  
Connection manager  
In the Connection manager, you can identify the status of data connections, view  
details on the amount of data sent and received, and end unused connections.  
Note: The actual invoice for calls and services from your service provider may vary,  
depending on network features, rounding off for billing, taxes, and so forth.  
Select > Settings > Connectivity > Conn. mgr..  
To view connection details, scroll to a connection, and select Options > Details.  
To end a connection, scroll to the connection, and select Options > Disconnect. To  
end all connections, select Options > Disconnect all.  
18. Enhancements  
Warning: Use only batteries, chargers, and enhancements approved by Nokia for  
use with this particular model. The use of any other types may invalidate any  
approval or warranty, and may be dangerous.  
E n h a n c e m e n t s  
71  
For availability of approved enhancements, please check with your dealer. When you  
disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.  
19. Battery and charger information  
Your device is powered by a rechargeable battery. The battery intended for use with this  
device is BL-5F. This device is intended for use when supplied with power from the following  
chargers: AC-4, AC-5, AC-6, AC-8 or DC-4 chargers. The battery can be charged and  
discharged hundreds of times, but it will eventually wear out. When the talk and standby  
times are noticeably shorter than normal, replace the battery. Use only Nokia approved  
batteries, and recharge your battery only with Nokia approved chargers designated for this  
device. Use of an unapproved battery or charger may present a risk of fire, explosition,  
leakage, or other hazard.  
If a battery is being used for the first time or if the battery has not been used for a prolonged  
period, it may be necessary to connect the charger, then disconnect and reconnect it to  
begin charging the battery. If the battery is completely discharged, it may take several  
minutes before the charging indicator appears on the display or before any calls can be  
made.  
Always switch the device off and disconnect the charger before removing the battery.  
Unplug the charger from the electrical plug and the device when not in use. Do not leave a  
fully charged battery connected to a charger, since overcharging may shorten its lifetime. If  
left unused, a fully charged battery will lose its charge over time.  
Always try to keep the battery between 15°C and 25°C (59°F and 77°F). Extreme  
temperatures reduce the capacity and lifetime of the battery. A device with a hot or cold  
battery may not work temporarily. Battery performance is particularly limited in  
temperatures well below freezing.  
Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic  
object such as a coin, clip, or pen causes direct connection of the positive (+) and negative  
(-) terminals of the battery. (These look like metal strips on the battery.) This might happen,  
for example, when you carry a spare battery in your pocket or purse. Short-circuiting the  
terminals may damage the battery or the connecting object.  
Do not dispose of batteries in a fire as they may explode. Batteries may also explode if  
damaged. Dispose of batteries according to local regulations. Please recycle when possible.  
Do not dispose as household waste.  
Do not dismantle, cut, open, crush, bend, deform, puncture, or shred cells or batteries. In the  
event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. In  
the event of such a leak, flush your skin or eyes immediately with water, or seek medical  
help.  
B a t t e r y a n d c h a r g e r i n f o r m a t i o n  
72  
Do not modify, remanufacture, attempt to insert foreign objects into the battery, or immerse  
or expose it to water or other liquids.  
Improper battery use may result in a fire, explosion, or other hazard. If the device or battery  
is dropped, especially on a hard surface, and you believe the battery has been damaged, take  
it to a service centre for inspection before continuing to use it.  
Use the battery only for its intended purpose. Never use any charger or battery that is  
damaged. Keep your battery out of the reach of small children.  
Important: Battery talk and standby times are estimates only and depend on signal  
strength, network conditions, features used, battery age and condition,  
temperatures to which battery is exposed, use in digital mode, and many other  
factors. The amount of time a device is used for calls will affect its standby time.  
Likewise, the amount of time that the device is turned on and in the standby mode  
will affect its talk time.  
Nokia battery authentication guidelines  
Always use original Nokia batteries for your safety. To check that you are getting an original  
Nokia battery, purchase it from an authorised Nokia dealer, and inspect the hologram label  
using the following steps:  
Successful completion of the steps is not a total assurance of the authenticity of the battery.  
If you have any reason to believe that your battery is not an authentic, original Nokia  
battery, you should refrain from using it, and take it to the nearest authorised Nokia service  
point or dealer for assistance. Your authorised Nokia service point or dealer will inspect the  
battery for authenticity. If authenticity cannot be verified, return the battery to the place of  
purchase.  
Authenticate hologram  
1. When you look at the hologram on the label, you should see the  
Nokia connecting hands symbol from one angle and the Nokia  
Original Enhancements logo when looking from another angle.  
2. When you angle the hologram left, right, down and up, you  
should see 1, 2, 3 and 4 dots on each side respectively.  
B a t t e r y a n d c h a r g e r i n f o r m a t i o n  
73  
What if your battery is not authentic?  
If you cannot confirm that your Nokia battery with the hologram on the label is an authentic  
Nokia battery, please do not use the battery. Take it to the nearest authorised Nokia service  
point or dealer for assistance. The use of a battery that is not approved by the manufacturer  
may be dangerous and may result in poor performance and damage to your device and its  
enhancements. It may also invalidate any approval or warranty applying to the device.  
Care and maintenance  
Your device is a product of superior design and craftsmanship and should be treated with  
care. The following suggestions will help you protect your warranty coverage.  
Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can  
contain minerals that will corrode electronic circuits. If your device does get wet, remove  
the battery, and allow the device to dry completely before replacing it.  
Do not use or store the device in dusty, dirty areas. Its moving parts and electronic  
components can be damaged.  
Do not store the device in hot areas. High temperatures can shorten the life of electronic  
devices, damage batteries, and warp or melt certain plastics.  
Do not store the device in cold areas. When the device returns to its normal temperature,  
moisture can form inside the device and damage electronic circuit boards.  
Do not attempt to open the device other than as instructed in this guide.  
Do not drop, knock, or shake the device. Rough handling can break internal circuit boards  
and fine mechanics.  
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.  
Do not paint the device. Paint can clog the moving parts and prevent proper operation.  
Use a soft, clean, dry cloth to clean any lenses, such as camera, proximity sensor, and  
light sensor lenses.  
Use only the supplied or an approved replacement antenna. Unauthorised antennas,  
modifications, or attachments could damage the device and may violate regulations  
governing radio devices.  
Use chargers indoors.  
Always create a backup of data you want to keep, such as contacts and calendar notes.  
To reset the device from time to time for optimum performance, power off the device  
and remove the battery.  
These suggestions apply equally to your device, battery, charger, or any enhancement. If any  
device is not working properly, take it to the nearest authorised service facility for service.  
C a r e a n d m a i n t e n a n c e  
74  
Disposal  
The crossed-out wheeled-bin symbol on your product, literature, or packaging  
reminds you that all electrical and electronic products, batteries, and accumulators  
must be taken to separate collection at the end of their working life. This  
requirement applies to the European Union and other locations where separate  
collection systems are available. Do not dispose of these products as unsorted  
municipal waste.  
By returning the products to collection you help prevent uncontrolled waste disposal  
and promote the reuse of material resources. More detailed information is available  
from the product retailer, local waste authorities, national producer responsibility  
organizations, or your local Nokia representative. For the product Eco-Declaration or  
instructions for returning your obsolete product, go to country-specific information  
Additional safety information  
Small children  
Your device and its enhancements may contain small parts. Keep them out of the reach of  
small children.  
Operating environment  
This device meets RF exposure guidelines when used either in the normal use position  
against the ear or when positioned at least 1.5 centimeters (5/8 inch) away from the body.  
When a carry case, belt clip, or holder is used for body-worn operation, it should not contain  
metal and should position the device the above-stated distance from your body.To transmit  
data files or messages, this device requires a quality connection to the network. In some  
cases, transmission of data files or messages may be delayed until such a connection is  
available. Ensure the above separation distance instructions are followed until the  
transmission is completed.  
Parts of the device are magnetic. Metallic materials may be attracted to the device. Do not  
place credit cards or other magnetic storage media near the device, because information  
stored on them may be erased.  
Medical devices  
Operation of any radio transmitting equipment, including wireless phones, may interfere  
with the functionality of inadequately protected medical devices. Consult a physician or the  
manufacturer of the medical device to determine if they are adequately shielded from  
external RF energy or if you have any questions. Switch off your device in health care  
facilities when any regulations posted in these areas instruct you to do so. Hospitals or  
health care facilities may be using equipment that could be sensitive to external RF energy.  
A d d i t i o n a l s a f e t y i n f o r m a t i o n  
75  
Implanted medical devices  
Manufacturers of medical devices recommend that a minimum separation of 15.3  
centimeters (6 inches) should be maintained between a wireless device and an implanted  
medical device, such as a pacemaker or implanted cardioverter defibrillator, to avoid  
potential interference with the medical device. Persons who have such devices should:  
Always keep the wireless device more than 15.3 centimeters (6 inches) from the medical  
device when the wireless device is turned on.  
Not carry the wireless device in a breast pocket.  
Hold the wireless device to the ear opposite the medical device to minimise the potential  
for interference.  
Turn the wireless device off immediately if there is any reason to suspect that  
interference is taking place.  
Read and follow the directions from the manufacturer of their implanted medical device.  
If you have any questions about using your wireless device with an implanted medical  
device, consult your health care provider.  
Hearing aids  
Some digital wireless devices may interfere with some hearing aids. If interference occurs,  
consult your service provider.  
Vehicles  
RF signals may affect improperly installed or inadequately shielded electronic systems in  
motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock)  
braking systems, electronic speed control systems, and air bag systems. For more  
information, check with the manufacturer, or its representative, of your vehicle or any  
equipment that has been added.  
Only qualified personnel should service the device or install the device in a vehicle. Faulty  
installation or service may be dangerous and may invalidate any warranty that may apply to  
the device. Check regularly that all wireless device equipment in your vehicle is mounted  
and operating properly. Do not store or carry flammable liquids, gases, or explosive materials  
in the same compartment as the device, its parts, or enhancements. For vehicles equipped  
with an air bag, remember that air bags inflate with great force. Do not place objects,  
including installed or portable wireless equipment in the area over the air bag or in the air  
bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag  
inflates, serious injury could result.  
Using your device while flying in aircraft is prohibited. Switch off your device before  
boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to the  
operation of the aircraft, disrupt the wireless telephone network, and may be illegal.  
A d d i t i o n a l s a f e t y i n f o r m a t i o n  
76  
Potentially explosive environments  
Switch off your device when in any area with a potentially explosive atmosphere, and obey  
all signs and instructions. Potentially explosive atmospheres include areas where you would  
normally be advised to turn off your vehicle engine. Sparks in such areas could cause an  
explosion or fire resulting in bodily injury or even death. Switch off the device at refuelling  
points such as near gas pumps at service stations. Observe restrictions on the use of radio  
equipment in fuel depots, storage, and distribution areas; chemical plants; or where blasting  
operations are in progress. Areas with a potentially explosive atmosphere are often, but not  
always, clearly marked. They include below deck on boats, chemical transfer or storage  
facilities and areas where the air contains chemicals or particles such as grain, dust, or metal  
powders. You should check with the manufacturers of vehicles using liquefied petroleum gas  
(such as propane or butane) to determine if this device can be safely used in their vicinity.  
Emergency calls  
Important: This device operates using radio signals, wireless networks, landline  
networks, and user-programmed functions. If your device supports voice calls over  
the internet (internet calls), activate both the internet calls and the cellular phone.  
The device will attempt to make emergency calls over both the cellular networks  
and through your internet call provider if both are activated. Connections in all  
conditions cannot be guaranteed. You should never rely solely on any wireless  
device for essential communications like medical emergencies.  
To make an emergency call:  
1. If the device is not on, switch it on. Check for adequate signal strength. Depending on  
your device, you may also need to complete the following:  
Insert a SIM card if your device uses one.  
Remove certain call restrictions you have activated in your device.  
Change your profile from offline or flight profile mode to an active profile.  
2. Press the end key as many times as needed to clear the display and ready the device for  
calls.  
3. Enter the official emergency number for your present location. Emergency numbers vary  
by location.  
4. Press the call key.  
When making an emergency call, give all the necessary information as accurately as  
possible. Your wireless device may be the only means of communication at the scene of an  
accident. Do not end the call until given permission to do so.  
Certification information (SAR)  
This mobile device meets guidelines for exposure to radio waves.  
Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits  
for exposure to radio waves recommended by international guidelines. These guidelines  
A d d i t i o n a l s a f e t y i n f o r m a t i o n  
77  
were developed by the independent scientific organization ICNIRP and include safety  
margins designed to assure the protection of all persons, regardless of age and health.  
The exposure guidelines for mobile devices employ a unit of measurement known as the  
Specific Absorption Rate or SAR. The SAR limit stated in the ICNIRP guidelines is 2.0 watts/  
kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR are conducted using  
standard operating positions with the device transmitting at its highest certified power level  
in all tested frequency bands. The actual SAR level of an operating device can be below the  
maximum value because the device is designed to use only the power required to reach the  
network. That amount changes depending on a number of factors such as how close you are  
to a network base station. The highest SAR value under the ICNIRP guidelines for use of the  
device at the ear is 0.76 W/kg.  
Use of device accessories and enhancements may result in different SAR values. SAR values  
may vary depending on national reporting and testing requirements and the network band.  
Your mobile device is also designed to meet the requirements for exposure to radio waves  
established by the Federal Communications Commission (USA) and Industry Canada. These  
requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR  
value reported under this standard during product certification for use at the ear is  
0.83 W/kg and when properly worn on the body is 1.05 W/kg.  
A d d i t i o n a l s a f e t y i n f o r m a t i o n  
78  
Index  
A
E
A-GPS 34  
e-mail messages 30  
alarm clock. See clock.  
assisted GPS 34  
F
file manager 64  
B
finding locations 37  
Flash Player 53  
barring password 19  
Bluetooth  
forwarding calls. See diverting calls  
connection settings 68  
receiving data 69  
sending data 68  
bookmarks 53  
G
gallery 42  
GPS  
GPS connection 33  
maps 35  
C
cache 55  
positioning 33  
calendar 57  
calibrating compass 37  
call register. See log.  
calls  
H
help 8  
answering 22  
barring 24  
I
ending 20  
indicators  
international 20  
making 20  
GPS light 16  
icons 15  
rejecting 22  
status light 16  
speed dial 21  
waiting 22  
K
camera  
capturing images 45  
recording video clips 46  
charging battery 10  
clock 57  
keyguard. See keypad lock.  
keypad lock 17  
L
closing applications 17  
compass 37  
listening to music 47  
lock code 11, 18  
log 26  
conference call 22  
connection manager 71  
connectivity 66  
contacts 32  
M
memory consumption 33  
converter 58  
maps  
browsing maps 36  
marking items 16  
media player. See RealPlayer.  
menu 16  
D
data cable. See USB  
device manager 65  
messages  
dictionary. See mobile dictionary  
diverting calls 24  
listening to 31  
service messages 29  
79  
SIM messages 31  
mobile dictionary 58  
motion sensor 17  
music player  
data call 61  
messaging 31  
packet data 61  
phone 60  
downloading music 48  
music shop 48  
Setting wizard 12  
speech 62  
playlists 48  
transferring music 48  
writing language 27  
sharing online 43  
software updates 66  
speed dialling 21  
standby theme 14  
switching between applications 17  
synchronisation 70  
N
notes 58  
active notes 57  
O
T
offline mode. See offline profile  
offline profile 14  
text input 27  
themes 56  
transferring data 66  
transferring music 48  
one-touch dial. See speed dialling.  
operator selection 25  
P
U
paired devices 69  
phonebook. See contacts.  
PIN 11, 18  
updating software 66  
UPIN 18  
USB 69  
module PIN 19  
signing PIN 19  
positioning 33  
profiles 56  
PTT. See push to talk.  
PUK 19  
push to talk 70  
using phone without a SIM card 14  
V
video call 23  
video sharing 25  
voice commands 60  
voice dialing 21  
voice mailbox 21  
voice recorder. See recorder.  
volume 17  
R
radio 51  
RealPlayer  
recorder 53  
W
ringing tones 33  
video ringing tones 42  
web  
connection security 53  
feeds 55  
saving a page 55  
S
saving locations 38  
screen saver 16  
sensor settings 17  
service commands 31  
settings  
viewing a saved page 55  
viewing bookmarks 53  
world clock. See clock.  
writing text. See text input.  
connection 61  
80  

Toshiba SATELLITE A500 User Manual
Teac GF 450K7 User Manual
Sony USM2GH User Manual
Sony DRX S70U W User Manual
Seagate U10TM ST320423A User Manual
Sanyo MM 5600 User Manual
Samsung SGH T340G User Manual
Samsung GH68 28271A User Manual
Samsung GH68 23213A User Manual
Onkyo C 7000R User Manual