’
OWNER S
MANUAL
Keys
Power key
Press and hold to turn your phone
on or off.
Fixed
antenna
Do not
attempt to
extend or
remove!
Soft keys
Their current
function is
Scroll
keys
Scroll
through
menus,
submenus,
and the
displayed
above the key
(for example,
here their
functions are
“Menu” and
“Names”).
Menu
Names
phone
book. Press
and hold for
continuous
scrolling.
ô
Push this key
to end a
phone call.
ó
Dials the
number on
the display.
Indicators and Icons
You have an active call.
The phone is waiting for you to enter a response.
All tones for the current profile have been set to Silent.
Keyguard has been activated to help prevent any
accidental keypresses.
You have one or more voice messages waiting.
You have one or more unread text messages waiting.
Digital service is available.
Any characters you enter will be upper-case letters or
numbers. Press the # key to switch letter case.
Any characters you enter will be lower-case letters or
numbers. Press the # key to switch letter case.
This appears when you press and hold the # key when
storing names. Letters can not be entered when this
appears, allowing quicker access to numbers.
You are in “special character” mode; select a special
character and press Insert. (When entering letters, you
can switch to this mode by pressing the ∗ key.)
The alarm clock is set.
You have a reminder in your calendar to do something
(appears only on Calendar display).
You have a reminder in your calendar that it’s some-
one’s birthday (appears only on Calendar display).
You have a reminder in your calendar to call someone
(appears only on Calendar display).
You have a reminder in your calendar of a meeting
(appears only on Calendar display).
Table of Contents
1. Safety At A Glance . . . . . . . . . . . . . . . 1
2. Getting Connected. . . . . . . . . . . . . . . 3
Attaching your battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Removing the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Charging your new battery . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
When is a good time to charge? . . . . . . . . . . . . . . . . . . . . . .4
Important Battery Information . . . . . . . . . . . . . . . . . . . . . . . . . .6
3. The Basics . . . . . . . . . . . . . . . . . . . . . 7
Switching the phone on and off. . . . . . . . . . . . . . . . . . . . . . . . .7
Get a good signal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Ending a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Answering a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Want to stop your phone from ringing
without answering the call?. . . . . . . . . . . . . . . . . . . . . . . . . .9
Keyguard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
4. Using Your Phone. . . . . . . . . . . . . . . .11
The display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
What is the ‘start screen’? . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Scrolling through the main menu . . . . . . . . . . . . . . . . . . . . . .12
Help text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Summary of menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
5. Features A to Z . . . . . . . . . . . . . . . . 16
Access codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Alarm clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
All calls timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Automatic answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Automatic redial. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Storing exchange rate. . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Converting currency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Call forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Call log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
i
Call restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Call settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Call timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Call waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Caller groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Caller ID. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Calling card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Making calling card calls. . . . . . . . . . . . . . . . . . . . . . . . . . 29
Clear call lists. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Clear timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Setting the clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Selecting time format . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Displaying or hiding the clock . . . . . . . . . . . . . . . . . . . . . . 32
Conference call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Current call timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Customer care contact number . . . . . . . . . . . . . . . . . . . . . . . 33
Dialed calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Earpiece volume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Emergency calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Emergency key 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Entering letters and numbers . . . . . . . . . . . . . . . . . . . . . . . . 35
ABC mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Changing letter case. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
123 mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Games. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
In-call menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Keypad tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Last call timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Last number redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Life timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Listen to voice messages . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Lock code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Changing your lock code. . . . . . . . . . . . . . . . . . . . . . . . . . 42
Manual touch tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Memory status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Message alert tone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
ii
Microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Missed calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
NAM selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Network feature setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Storing codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Network services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
One-touch dialing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Outbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Paging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Phone book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Storing a name and number . . . . . . . . . . . . . . . . . . . . . . . .50
Recalling names & numbers . . . . . . . . . . . . . . . . . . . . . . . .50
Erasing stored names and numbers. . . . . . . . . . . . . . . . . . .51
Phone lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Phone settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Customizing Profiles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Received calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Restore factory settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Restrict calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Ringing options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Ringing tones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Ringing volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Roaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Scrolling view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Security settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Security code. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Changing your security code . . . . . . . . . . . . . . . . . . . . . . . .61
Send own number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Storing a name & number. . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Quick save. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Text messages and pages. . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Writing text messages . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Sending text messages. . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Receiving text messages. . . . . . . . . . . . . . . . . . . . . . . . . . .65
Reading text messages. . . . . . . . . . . . . . . . . . . . . . . . . . . .66
Reading options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
Forwarding a message . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
iii
Replying to a message . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Receiving a page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Touch tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Touch tone length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Unlocked phone number . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Vibrating alert. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Voice messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Setting up your voice mailbox number . . . . . . . . . . . . . . . . 70
Greetings, passwords, and prompts. . . . . . . . . . . . . . . . . . 71
Listening to your voice messages . . . . . . . . . . . . . . . . . . . 71
Voice privacy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Warning and game tones . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Welcome note . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Write new . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
6. Accessories. . . . . . . . . . . . . . . . . . . 73
Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Chargers & other accessories . . . . . . . . . . . . . . . . . . . . . . . . 75
7. Troubleshooting. . . . . . . . . . . . . . . . 78
8. Reference Information . . . . . . . . . . 79
9. Technical Data . . . . . . . . . . . . . . . . . 85
10. NOKIA One-Year Limited Warranty . . 86
11. Index . . . . . . . . . . . . . . . . . . . . . . . . 90
iv
1. Safety At A Glance
Read these simple guidelines before using your
phone. Failure to comply with these guidelines may
be dangerous or illegal.
For more detailed safety information, see
Road Safety Comes First
Don’t use a hand-held phone while driving; park the
vehicle first.
Switch Off In Hospitals
Switch off your phone when near medical equip-
ment. Follow any regulations or rules in force.
Switch Off On Aircraft
Mobile phones can cause interference. Using them
on aircraft is illegal.
Switch Off When Refueling
Do not use the phone at a refueling point. Do not
use near fuels or chemicals.
Switch Off Near Blasting
Do not use the phone where blasting is in progress.
Observe restrictions, and follow any regulations or
rules in force.
Interference
All mobile phones may get interference which could
affect performance.
Use Sensibly
Use only in the normal position (to ear). Avoid un-
necessary contact with the antenna when phone is
on.
Qualified Service
Only qualified service personnel may install or repair
cellular phone equipment.
Accessories and Batteries
Use only approved accessories and batteries.
Do not connect incompatible products.
1
FCC/Industry Canada Notice
Your phone may cause TV or radio interference (e.g. when using
a telephone in close proximity to receiving equipment).
The FCC/Industry Canada can require you to stop using your
telephone if such interference can not be eliminated. If you
require assistance, contact your local service facility.
This device complies with part 15 of the FCC rules. Operation is
subject to the condition that this device does not cause harmful
interference.
Using this Guide
The wireless phone described in this guide is approved for use
in TDMA/AMPS networks.
A number of features included in this guide are called Network
Services. They are special services provided by wireless service
providers. Before you can take advantage of any of these
Network Services, you must subscribe to the service(s) from
your home service provider and obtain instructions for their use.
Updates
The latest version of this Owner’s Manual may be found on
Nokia’s World Wide Web site at www.NokiaUSA.com.
Interactive manual
Now, Nokia has a great new way for you to learn how to use
all of your phone features. Go to www.NokiaHowTo.com to
access the Nokia Interactive Owner’s Manual. It provides an
interactive way to get step-by-step instructions for any of your
phone’s features.
Disclaimer
It’s possible that you may not be able to activate your phone on
all wireless systems. Please see your service provider for details.
2
2. Getting Connected
You’re battery should be charged before you activate
your new phone. This section will help familiarize you on
how, and when, to charge your battery.
Attaching your battery
Simply place the battery in the grooves on the back of
your phone. Then slide the battery upward until it clicks.
Note: Use only those batteries approved by the phone
manufacturer and recharge your battery only with the chargers
approved by the manufacturer.
Removing the battery
Note: Switch off the phone before removing the battery!
1. Press and hold the
button at the top of
the battery.
2. Slide the battery
toward the bottom of
the phone.
3. Lift the battery off
the phone.
3
Charging your new battery
Your phone can be used with either a rechargeable
Li-Ion or NiMH battery. Note that a new battery’s full
performance is achieved only after two or three
complete charge and discharge cycles.
With your phone on or off, connect the charger to a
standard 120V AC outlet. Then connect the lead from
the charger to the bottom of your phone or place it on
a charging stand.
When the battery begins charging, your phone will beep
once and the battery strength indicator on the right side
of the display will scroll.
Note: If the battery is totally empty, it may take a few minutes
before the charging indication appears on the display.
If your phone displays Not charging, charging is
suspended. Check that the battery is not connected to
a non-approved charging device. If the battery is very
hot or cold, wait for a while; charging will automatically
resume after the battery is restored to its normal
operating state. If charging still fails, contact your dealer.
When is a good time to charge?
You can charge your battery anytime. If you have a
NiMH battery, you should allow it to completely
discharge once in a while.
When your phone beeps once and displays Battery low,
you only have a couple of minutes of talk time remaining.
The repetition rate of these battery-low warnings depend
on the remaining battery capacity and the battery con-
dition. These warnings are more frequent when you’re
in a call.
Note: The phone will not give you the warning tone under
Once all the power has drained from your battery, you’ll
hear three beeps with the message Recharge battery on
your display. At this point, your phone will switch itself
off and you’ll need to recharge your battery.
4
When is charging complete?
When the charge indicators stop scrolling, your
phone is considered fully charged. However, a
slight increase in charge may occur if your
phone is left connected to the charger for a
while. This is called “trickle charge.”
Charging times depend on the type of battery and
charger used.
For approximate charging and operating times, see “Standby
Can you make calls while charging?
Yes, you can. But your battery may not charge while a
call is in progress. Charging should resume once you
end the call.
Discharging NiMH batteries
A NiMH battery lasts longer and performs better if you
fully discharge it from time to time. To discharge the
battery, leave your phone switched on until the battery
is drained. The phone will display several messages that
the battery is low and that you need to recharge it; just
ignore them. Do not attempt to discharge the battery by
any other means.
5
Important Battery Information
•
The battery can be charged and discharged hundreds of
times but it will eventually wear out. When the operating
time (talk time and standby time) is noticeably shorter than
normal, it is time to buy a new battery.
•
Use only batteries approved by the phone manufacturer
and recharge your battery only with the chargers approved
by the manufacturer. When a charger is not in use, discon-
nect it from the power source. Do not leave the battery
connected to a charger for longer than a week, since
overcharging may shorten its life. If left unused a fully
charged battery will discharge itself over time.
•
•
(NiMH batteries only) For good operation times, discharge
the battery from time to time by leaving your phone
switched on until it turns itself off (or by using the battery
discharge facility of any approved accessory available for
your phone). Do not attempt to discharge the battery by
any other means.
Temperature extremes will affect the ability of your battery
to charge: allow it to cool down or warm up first.
•
•
Use the battery only for its intended purpose.
Never use any charger or battery which is damaged or
worn out.
•
•
Do not short circuit the battery. Accidental short circuiting
can occur when a metallic object (coin, clip, or pen)
causes direct connection of the + and - terminals of the
battery (metal strips on the back of the battery), for
example when you carry a spare battery in your pocket or
purse. Short circuiting the terminals may damage the
battery or the connecting object.
Leaving the battery in hot or cold places, such as in a
closed car in summer or winter conditions, will reduce the
capacity and lifetime of the battery. Always try to keep the
battery between 59º F and 77º F (15º C and 25º C). A
phone with a hot or cold battery may temporarily not work,
even when the battery is fully charged. NiMH batteries’
performance is particularly limited in temperatures below
14º F (-10º C). Li-Ion batteries’ performance is particularly
limited in temperatures below 32º F (0º C).
•
•
Do not dispose of batteries in a fire!
Dispose of used batteries in accordance with any local
regulations.
6
3. The Basics
You have purchased a powerful phone, with lots of
features. Read this section for some very basic
information on how to use your phone.
A more comprehensive description of your phone is
Switching the phone on and off
Press and hold the key for two seconds to switch the
phone on or off.
Switching off with the
key
Quickly press the
key (Switch off! will appear,
highlighted) then press OK.
Note: Thismethod is available in all profiles exceptHeadsetand
Car.
NORMAL POSITION: Hold the phone as you would any other
telephone with the antenna pointed up and over your shoulder.
TIPS ON EFFICIENT OPERATION: As with any other radio
transmitting device, do not touch the antenna unnecessarily
when the phone is switched on. Contact with the antenna
affects call quality and may cause the phone to operate at a
higher power level than otherwise needed.
WARNING! Do not switch on the phone when wireless phone
use is prohibited or when it may cause interference or danger.
Get a good signal
Your phone operates on radio waves, and the quality of
radio reception depends entirely on the strength of the
radio signal in your area.
This radio coverage is maintained by a wireless network
and the quality of calls on a wireless phone depends on
the strength of the wireless radio signal.
7
Checking signal strength
or in a call, the signal strength is indicated by
the indicators on the left side of your phone’s
display. These indicators scroll as the strength
of the signal increases and decreases.
Increasing your phone’s signal may be easy. Try moving
your phone slightly, or move towards a window if you’re
calling from inside a building.
Making a call
Enter the area code and phone number and press
ó
Editing a number on display
Press V to move the cursor to the left and W to move it
to the right. Press Clear to delete the character to the
left of the cursor.
Dialing stored phone numbers
View stored names and numbers by pressing Wóor V
Calling card calls
Emergency calls
Ending a call
Press
ô
Answering a call
Press any key except
ô
or
Note: If Keyguard is on (see next
paragraph), only answers calls.
ó
8
Want to stop your phone from ringing without
answering the call?
Press
ô
when the phone rings. This keeps you from
answering a call if it's inconvenient to talk.
You can still answer the call if Call or the name of the
person who is calling is still flashing on your display.
If you don't wish to answer the call, it will be forwarded
to your voice mailbox if you have a voice mail
subscription.
mailbox.
Keyguard
This feature helps to prevent accidental key presses
(e.g. when your phone is in your pocket, in your purse)
by locking your keypad.
If any keys are pressed while
Keyguard is activated, Press Unlock
and then * will display.
Activating Keyguard
There are three different ways to activate Keyguard.
Keys locked will appear on the display when activated.
•
•
•
Press and hold
ô
Press Menu ∗
Press Menu 9 at the start screen
Deactivating Keyguard
There are two different ways to deactivate Keyguard.
•
•
Press Unlock, then ∗
Press and hold
ô
until Unlock keys? appears, then
press OK
Note: When Keyguard is ON, calls to the emergency number
programmed into your phone (e.g. by pressing 911 then
may be possible. However, Emergency key 9 doesn’t work.
ó
)
9
Answering a call with Keyguard active
Press to answer the call. After you end the call,
ó
Keyguard automatically becomes active again.
Some notes about Keyguard
•
Calls may be possible to the emergency number
programmed into your phone (e.g. 911 or other official
emergency number). The number is displayed only after
you have keyed in its last digit.
•
Pressing the
key quickly turns lights on for 15 seconds.
•
Keyguard is automatically turned off when the phone is
connected to a car kit.
10
4. Using Your Phone
The first few days you have your phone, play with it to
learn how the menu and submenu system works.
The more you learn how to access these menus and
submenus, the more fun you’ll have with your phone.
This section describes the different methods of using
your phone menus and submenus.
The display
Soft keys
Your phone has two soft keys
located below the display. The
current function is indicated by
the texts appearing directly above
them. Press the corresponding key
under the choice you wish to select.
This illustration shows the phone at the start screen
screen always displays Menu on the left and Names on
the right. Menu allows you to access your phone’s
menus and submenus. Names allows you to access
Scroll key
Your phone has a scroll key located just below the
display screen. The scroll key has two arrows on it that
look like V and W. Press these to navigate through your
phone’s menus and submenus, as well as through your
Scroll bar
When you access your phone’s menu and sub-
menus, you will notice a scroll bar at the far right
of the screen. This bar indicates your location in
the menu structure; each “tab” on the bar
represents a different menu item.
11
For example, press Menu once. The scroll bar appears
with the first (top) tab displayed. A different tab appears
each time you press the W or V key to move up and
down through the menu structure. The scroll bar works
the same way with submenus.
Menu & submenu numbering
When you scroll to a menu or submenu, the menu
number and/or submenu number appears on the
display above the scroll bar.
For example, when you scroll to menu 2 (Call log) the
number 2 appears in the top right-hand corner of the
display. If you scroll to menu 4 (Settings), submenu 3
(Security settings), your phone will display 4-3 in the top
right-hand corner.
phone’s features along with their menu locations.
What is the ‘start screen’?
The start screen appears when you first turn your phone
on, in its idle state.
When you want to get to the start screen, press
any time except during a call (unless you want to hang
up).
ô
at
Note: If you press
(i.e., a setting, phone number, name, etc.), the phone displays
the start screen and the input is not saved.
ô
when the phone is requesting input
Scrolling through the main menu
Press Menu at the start screen. Then press W or V to
reach the desired menu item.
Press Select, Options or OK (whichever appears) to
enter submenus and to choose options.
Press Exit to exit the present menu or Back to go back
one level.
12
Using shortcuts
This is a quick and easy way to access a menu without
having to scroll through other menus.
Press Menu, then menu number, then submenu
number.
Press the menu and submenu numbers within a couple
of seconds of each other when using this method.
For a summary of your phone’s menu structure, see “Summary
Help text
If you’re not sure how a feature works, wait just a few
seconds and help text will appear for most of your
phone’s features. Press More to see the next page of
the text or Back to exit.
13
Summary of menu items
1 Messages
1 1 Text Messages
1 1 1 Inbox
1 1 2 Write new
1 1 3 Outbox
1 1 4 Saved
1 1 5 Erase all
1 2 Voice Messages
1 2 1 Listen to voice messages
1 2 2 Voice mailbox number
1 3 Welcome Note
2 Call log
2 1 Missed calls
2 2 Dialed calls
2 3 Received calls
2 4 Clear call lists
2 5 Call timers
3 Profiles
3 1 Normal (following submenus appear in all profiles)
3 1 1 Select
3 1 2 Customize
3 1 2 1 Ringing options
3 1 2 2 Ringing volume
3 1 2 3 Ringing tone
3 1 2 4 Vibrating alert (w/vibrating battery only)
3 1 2 5 Keypad tones
3 1 2 6 Warning and game tones
3 1 2 7 Message alert tone
3 2 Silent
3 3 Meeting
3 4 Outdoor
3 5 Pager
3 6 Car (once used with car kit)
3 7 Headset (once used with headset)
14
4 Settings
4 1 Call settings
4 1 1 Emergency key 9
4 1 2 Automatic redial
4 1 3 Calling card
4 2 Phone settings
4 2 1 Clock
4 2 2 Alarm clock
4 2 3 Touch tones
4 2 4 Restore factory settings
4 2 5 Language
4 3 Security settings
4 3 1 Restrict calls
4 3 2 Access codes
4 4 Network services
4 4 1 Voice privacy
4 4 2 Call forwarding
4 4 3 Call waiting
4 4 4 Send own number
4 4 5 Network feature setting
4 4 6 NAM selection
5 System
5 1 Automatic
5 2 Manual
5 3 New search
6 Games
6 1 Memory
6 2 Snake
6 3 Logic
6 4 Dice
7 Calculator
8 Calendar
9 Keyguard
15
5. Features A to Z
ABC mode
This allows you to enter names into your phone book.
Access codes
This is a security feature that allows you access to
Alarm clock
The alarm clock operates off your
phone’s clock. The volume for the
alarm clock is determined by the
current ringing volume.
Note: If you have selected the Silentor Beep once ringing option
Setting the alarm clock
1. Press Menu 4 2 2 (Settings - Phone settings - Alarm
clock)
2. Enter time you wish to set alarm (use two-digit
fields for hours and minutes). Existing digits will
be replaced with the new alarm time.
3. Press OK
4. Select either am or pm and press OK
Note: Step 4 appears only if you have selected am/pm format;
see “Selecting time format” on page 31 for more information.
When the alarm goes off
Press Stop to shut off the alarm.
16
Snoozing
Press Snooze.
The alarm will go off again in 10 minutes. If you let the
phone alarm for 1 minute without pressing a key, it
stops alarming for 10 minutes then starts again.
Turning the alarm clock off
Press Menu 4 2 2 (Settings - Phone settings - Alarm
clock), then scroll to Off and press OK.
Note: If you have selected the Silent or Meeting profile, your
alarm will only beep once. The best profile to use while using the
alarm clock is Normal or Outdoor, unless these have been
modified from their original settings.
All calls timer
This feature keeps track of how much time you have
spent on all calls with your phone.
Automatic answer
This is one of the settings in your phone’s Profiles
incoming voice calls after one ring.
Note: This can only be used when your phone is connected to
a headset or to an approved handsfree car kit equipped with the
ignition sense option, with the ignition on.
Activating automatic answer
1. Press Menu 3 (Profiles)
2. Your phone lists each profile. Use W to highlight
either the Car or Headset profile and press Options.
Note: Car and Headset will not appear unless your phone has
already been connected to a car kit or headset at least one time.
3. Highlight Customize and press OK. Press W to
Automatic answer, then press Select again.
4. Press W to On and press OK.
17
Automatic redial
Your phone will redial the number you’re trying to call up
to 3 times after you hear a quick, busy signal. Press
ô
to stop the call attempts.
This feature attempts to redial numbers that are busy
due to the wireless network. It will not redial numbers to
a busy party.
Activating automatic redial
Press Menu 4 1 2 (Settings - Call settings - Automatic
redial), then press W or V to On and press OK.
Calculator
Your phone’s calculator adds,
subtracts, multiplies, divides, and
converts currency.
Remember! Your phone must be switched
on to use this feature. Do not switch on the
phone when wireless phone use is prohibited or when it may
cause interference or danger.
Using the calculator
1. Press Menu 7 (Calculator)
2. Enter the first number in the calculation (press # for
decimals)
3. To add, press ∗ (+ appears)
To subtract, press ∗∗ twice (- appears)
To multiply, press ∗∗∗ (* appears)
To divide, press ∗∗∗∗ ( / appears)
To add a decimal, press the # key
4. Enter the second number
Repeat these steps as many times as needed. Press
Clear to erase any mistakes.
5. Press Options. With Equals highlighted, press OK
Note: You can also choose Add, Subtract, Multiply, and
Divide from the list of options.
18
Storing exchange rate
1. Press Menu 7, then press Options
2. Scroll to Exchange rate and press OK
3. Press W or V at either How many home units to a
visited unit or How many visited units to a home
unit, depending on how you wish to convert the
currency. Press OK once you decide.
4. Enter the appropriate exchange rate and press OK
(use the # key for decimals)
5. Phone will display Rate saved
Converting currency
1. Press Menu 7
2. Enter number of units, then press Options
3. Press W or V to either To home or To visited, and
press OK
4. Converted currency will display
Calendar
The calendar keeps track of birth-
days, meetings, simple reminders,
and calls you need to make. It can
even sound an alarm when it’s time
for you to make a call or go to a
meeting.
Remember! Your phone must be switched on to use this
feature. Do not switch on the phone when wireless phone use
is prohibited or when it may cause interference or danger.
Note: Your phone must remain on to use the calendar’s alarm
feature. If your phone is off, the alarm will not sound at its
scheduled time.
19
Using the calendar
1. Press Menu 8 (Calendar)
2. If you haven’t set the time and date, your phone
prompts you to set your phone’s clock
When your phone prompts you for the time with
hh:mm, enter the time in hours and minutes
(using two-digit fields), then press OK
Time format (24-hour or am/pm) is set using the Clock.
When your phone prompts you for the date with
mm/dd/yyyy, enter the month and day (using two-
digit fields) and year (using a four-digit field), then
press OK.
Tip: Use W to move the cursor right and V to move it
left. When you enter a digit, it writes over the number to
the right of the cursor.
3. Your phone displays the current day. You can also
scroll to different days by pressing W or V.
4. Once you’re at the date you want, press Options.
Then use Wýto highlight the option you want, and
press Select. The options are:
Option 1: View day
With this option, you can view the notes of the day
currently on display.
Use W to scroll through the notes. Each note allows you
to choose the following Options:
Erase clears the note from your calendar.
Edit gives you the same prompts you got when you
made the note.
Move gives you the date prompt so you can move the
note to another date.
20
Option 2: Make note
With this option, you’ll need to choose Reminder, Call,
Meeting, or Birthday. Your phone will prompt you for
more information depending on which one you choose.
You can also set an alarm for any calendar note.
entering information at the Subject: prompt.
Note: When the alarm goes off, you can press Postpone or OK.
Press OK to shut off the alarm.
Option 3: Erase notes
With this option, you’ll need to choose which notes to
erase. If you choose all the notes for the day currently
on display (Of Chosen Day), or One By One (for all notes
in the calendar), your phone presents each note to you
with the option Erase or Back.
If you choose All at Once, your phone will delete all
calendar notes. When prompted to confirm the erase,
press Yes or No.
Option 4: View all
This allows you to view the notes of the entire calendar.
Use W or V to scroll through the notes. Calendar memory
empty will appear if there are no notes in the calendar.
Option 5: Go to date
Enter the date you wish to go to.
Option 6: Set the date
Enter the day and month (using two-digit fields) and
year (using a four-digit field), then press OK.
21
Call forwarding
This network service is used to forward incoming calls
to another number so you won’t miss an important call.
Check with your service provider for details.
Note: Before you can activate this feature, you should first store
the feature code given to you by your service provider.
Otherwise, this feature may not appear in the menu.
However, you can use the feature code manually, if you choose,
by including the feature code in front of the phone number
(e.g., *72 555 1212)
1. Press Menu 4 4 2 (Settings - Network services - Call
forwarding)
2. Scroll to desired call forwarding feature (see options
below) and press Select
3. Highlight Activate and press OK
4. Enter phone number at Number: (or press Search to
locate number in phone book) and press OK
5. Your phone will attempt to call the network to
confirm the feature code you entered in Menu 4 4 5
6. Once the feature code had been confirmed, the
feature is activated
Call forwarding options
Forward all calls forwards all incoming calls.
Forward if busy forwards calls only when you’re on the
phone.
Forward if not answered forwards calls if you don’t
answer.
Forward if out of reach forwards calls if you are out of
the serving wireless network.
Cancel all call forwarding cancels all call forwarding
options you have active.
22
Call log
This feature automatically keeps
track of numbers you’ve dialed,
numbers that have called you, and
the amount of time you’ve spent on
calls.
Using call log
1. Press Menu 2 (Call log)
2. Scroll to one of the following options, then press
Select or OK
Tip: You can dial any of the phone numbers by pressing
ó
while the number is on the display.
The ‘Options’ soft key
When you access Dialed calls, Received calls, or Missed
calls and press Options, a list of options will appear on
your phone’s display.
Call time shows the date and time when the call was
first connected (if clock has been set)
Edit number allows you to edit the dialed number.
Save allows you to save the number into your phone
book.
Erase will erase the number from the call list.
View number will appear only if the number has been
stored in the phone book and the name is displayed
instead of the number.
23
Call restrictions
This feature allows you to restrict incoming and
outgoing calls to and from certain numbers.
Call settings
This feature allows you to access and activate some of
your phone’s features.
Using call settings
1. Press Menu 4 1 (Settings - Call settings)
2. Press W to reach one of the following options, then
press Select
Call timers
Your phone automatically keeps
track of the amount of time you’ve
spent in calls.
1. Press Menu 2 5 (Call log - Call
timers)
2. Scroll repeatedly to access the following options
Last call displays call duration of last call.
All calls displays call duration of all calls made since
on how to clear call timers).
Life timer shows duration of all calls; this can not be
Clear timers clears all call timers except the Life
24
These call durations are for the currently-selected NAM
(phone number). Your phone has separate timers for
each NAM your phone uses, except for the Life timer.
Note: The actual time invoiced for calls by your service provider
may vary, depending upon items such as network features,
rounding off for billing, and taxes.
Call waiting
If you have subscribed to Call Waiting, your phone will
beep during a call let you know you have an incoming
call. Your phone may also display the incoming caller’s
Answering an incoming call with call waiting
Press
ó
Press
Swappinóg between two calls
Ending the calls
Press to end the current call.
ô
Activating call waiting
You can also activate this feature with your phone;
simply ask your service provider for the feature code,
store it into your phone, then activate it.
Note: This feature may not appear in your phone’s menu until
the feature code has been stored.
1. Press Menu 4 4 3 (Settings - Network services - Call
waiting)
2. Scroll to Activate (or select Cancel to cancel and
press OK
3. Your phone will attempt to call the network to con-
firm the feature code you entered in Menu 4 4 5
25
4. Once the feature code has been confirmed, the
feature is activated.
Caller groups
You can create groups of names in your Phone book
tone. Then you’ll know when someone from that group
is calling you because of the way the phone rings.
Adding names to a caller group
Note: The names and numbers that you add to a group must
already be stored in your phone book. See “Storing a name and
1. With the display clear, press W until you see the
name or number you want, or choose Name and
then press Search
2. Press Details, if shown, or skip to Step 3
3. Press Options
4. Use W to reach Caller groups. Press Select.
5. Use W to reach the group to which you want to add
this name or number. Press Select.
Defining a ringing tone for a caller group
1. With the display clear, press Names
2. Press W to reach Caller groups. Press Select
3. Use W to reach the group you want. Press Select
4. Press W until you see Group ringing tone. Press
Select. Use W to reach the tone you want to hear
when anyone from this group calls you. Press OK.
Tip: You can set your phone to ring only when people
from certain caller groups call you, and to otherwise be
silent.
See the “Caller group” description under “Ringing options” on
26
Renaming a caller group
2. Press W until you see Rename group. Press Select.
Removing names from a caller group
2. Use W to reach No group. Press Select.
Caller group graphics
When someone calls you from a particular caller group,
your phone can display a graphic to identify which caller
group that person is calling from.
1. Press Names, scroll to Caller groups, then press Select
2. Scroll to the caller group you wish to display the
graphic for and press Select
3. Scroll to Group graphic and press Select
4. Scroll to On to display the graphic that goes with
that particular caller group
Caller ID
Caller ID is a network service that can display the name
and phone number of the person calling you, if the
information is available. Contact your service provider
for details.
If the caller can be identified, the phone may display the
caller’s name and phone number. The information
displayed depends on the information available through
the network and your phone book. It is possible that
only the name or the number will appear.
Call - caller ID unavailable will display when the wireless
network doesn’t recognize the calling number. Also,
Call - caller ID blocked may display if the calling party
has blocked caller ID.
27
Calling card
If you wish to use a calling card for
long distance calls, you must first
store your calling card information
into your phone. Your phone can
store up to four calling cards.
Storing your calling card
1. Press Menu 4 1 3 (Settings - Call settings - Calling
card)
2. Scroll to desired calling card and press Options
3. Press W or V to Edit, press OK
4. Enter security code and press OK
5. Press Select at Dialing sequence. Select the dialing
sequence your card uses (use chart below), press
W or V to choose sequence, then press Select
Note: The order of the following steps may vary, depending on
which dialing sequence your card uses.
6. Enter access number when prompted for the cal-
ling card’s access number (usually the 1-800 num-
ber listed on the back of the calling card), press OK
Note: You can also retrieve the access number from your phone
book if it has already been stored. Simply press Search, then W
or V to find the number.
7. Enter card number and/or PIN when prompted to
enter calling card number and personal identifica-
tion number, then press OK. Press OK again at Save
changes?
8. Press W or V to Card name and press Select. Enter
card name using your phone’s keypad, press OK.
help on entering the card name
28
For details about your phone’s security code, see “Security
Cards
using this
sequence*
Dialing
Sequence
Use for cards that
require you to:
Access no.
+ phone no.
+ card no.
Dial 1-800 access number,
then phone number, then card Choice, Sprint
number (+ PIN if required)
MCI, AT&T True
Canada, Unitel
Access no.
+ card no.
+ phone no.
Dial 1-800 access number,
then card number (+ PIN if
required), then phone number
networkMCI,
WorldPhone MCI
Prefix
Dial the prefix (any numbers
GTE, PacBell,
+ phone no.
+ card no.
that must precede the phone AT&T, Stentor
number) and phone number
you want to dial, then card
number, (then PIN, if required)
*These calling cards are frequently used with these dialing
sequences. However, they may vary and are subject to change
at the phone company’s discretion.
Choosing a calling card to use
1. Press Menu 4 1 3 (Settings - Call settings - Calling
card)
2. Scroll to desired card and press Options
3. Press W or V to highlight Select and press OK.
4. Enter security code at Security code:, press OK
5. Your phone will display Card ready for use
Making calling card calls
1. Enter the phone number, including any prefix (such
as 0 or 1) that your calling card may require when
you make a calling card call. See your calling card
for instructions.
2. Press and hold
ó
for a few seconds until your
phone displays Card call.
29
3. Listen for the tone, then press OK. (Your phone will
display Wait for tone, then press OK)
4. Listen for the tone again, then press OK. (Your
phone will display Wait for tone, press OK again.)
Note: This procedure may not apply to all calling card options
programmed into your phone. Please look at the back of your
calling card or contact your long distance company for more
information.
Change lock code
This feature allows you to change your lock code.
Change security code
This feature allows you to change your security code.
Clear call lists
This feature will clear all dialed numbers, as well as
numbers of answered calls and missed calls. You can
not undo this operation, so be careful.
1. Press Menu 2 4 (Call log - Clear call lists)
2. Highlight either All, Missed, Dialed, or Received and
press OK (All will clear all call lists, while the others
clear their respective call lists)
Clear timers
This feature clears all call timers for the currently-selected
1. Press Menu 2 5 4 (Call log - Call timers - Clear timers)
2. Enter security code at Security code: and press OK
30
Careful: Clearing call timers can not be undone. If you are
using the call timers to log or track the amount of time you are
using your phone, you may wish to record the call timers before
you erase them.
Note: The Life timer contains important warranty information
Clock
Your phone has an internal clock
that can be displayed or hidden.
It also features an alarm clock
Note: The clock is powered by your
phone’s battery. If your clock has been activated and you re-
move the battery while your phone is still on, you will need to
reset the time after you turn your phone back on.
However, if you first turn your phone off before removing the
battery, your phone will retain the time and date it had before
the battery was removed.
Setting the clock
1. Press Menu 4 2 1 (Settings - Phone settings - Clock)
2. Scroll to Adjust time and press Select
3. Enter present time at Time: (use two-digit fields for
hours and minutes)
4. Press OK
5. Select am or pm and press OK (if am/pm format has
been selected; see below)
Selecting time format
1. Press Menu 4 2 1 (Settings - Phone settings - Clock)
2. Scroll to Time format and press Select
3. Scroll to either 24-hour or am/pm
4. Press OK
31
Displaying or hiding the clock
1. Press Menu 4 2 1 (Settings - Phone settings - Clock)
2. Scroll to either Hide clock or Display clock (only one
will display depending on the current setting)
3. Press Select
Conference call
This feature allows you to add a third party to a call. You
can use this feature with local and long distance calls.
Note: This feature may not be available in all wireless systems.
See your service provider for details and availability.
Making a conference call
While in a call, enter (or recall from the óphone book)
1.
the second phone number and press
2. Once the third party answers, press
ó
to con-
nect all three parties
3. Press
ó
again if you wish to disconnect the third
to drop both parties.
party. Press
ô
Recalling a number from the phone book during
a conference call
1. During the call, press Options
2. Scroll to Names and press OK
3. Press Select at Search
4. Enter name and press OK, or just press W or V to
scroll through the phone book
5. Press
ó
Current call timer
This feature displays the running elapsed time on your
screen while a call is active. Once the call has ended,
simply press any key to clear the display.
32
Activating the current call timer
Press Menu 2 5 (Call log - Call timers) and press Details.
With Current call timer displayed, press Select, scroll to
On, and press OK
Customer care contact number
With the press of a single button, you can quickly
attempt calls to your service provider. This feature can
be helpful if you’re having difficulties dialing a number,
especially when traveling outside your home area.
Simply press and hold the 2 key and your phone will
attempt to call a customer care operator in the area.
Note: This may not be available on all systems. Contact your
service provider for availability.
Customize profiles
This feature allows you to customize individual Profiles.
Dialed calls
Your phone automatically stores the
last 10 numbers you’ve dialed.
1. Press Menu 2 2 (Call log - Dialed
calls)
2. Press W or V to scroll through dialed numbers list
3. Press
ó
to dial the number you wish to call
You can also access the last 10 dialed numbers if you
press ó, then quickly press W or V to scroll through
the list.
The ‘Options’ soft key
33
Earpiece volume
The scroll keys on your phone will adjust the earpiece
volume during a phone call. The top scroll key increases
while the bottom one decreases the volume.
If an accessory like a headset or a car kit, or one with its
own loudspeaker, is connected to your phone, the
scroll keys will adjust the volume for that accessory.
Note: Using the scroll keys to adjust earpiece volume functions
only during phone calls.
Emergency calls
Before attempting any emergency calls, see “Making an Emer-
gency Call” on page 82 for important safety information.
1. If the phone is not on, switch it on
2. Press the
ô
key to ready the phone for calls.
(Press it twice if there are still digits on the display.)
3. Key in the emergency number for your present
location (e.g. 911 or other official emergency
number). Emergency numbers vary by location.
4. Press
ó
IMPORTANT!
This phone, like any cellular phone, operates using radio signals,
cellular and landline networks, as well as user-programmed func-
tions which can not guarantee connection in all conditions.
Therefore, you should never rely solely upon any cellular phone
for essential communications (e.g., medical emergencies).
Remember, to make or receive any calls, the phone must be
switched on and in a service area with adequate cellular signal
strength.
Emergency calls may not be possible on all cellular phone net-
works or when certain network services and/or phone features
are in use. Check with local cellular service providers.
If certain features are in use (keyguard, restrict calls, etc.), you
may first need to turn those features off before you can make an
emergency call. Consult this document and your local cellular
service provider.
34
When making an emergency call, remember to give all the nec-
essary information as accurately as possible. Remember that
your cellular phone may be the only means of communication
at the scene of an accident - do not cut off the call until given
permission to do so.
Emergency key 9
emergency call when you press 9, then
dials the emergency number pre-programmed into your
phone.
With this feature on, the phone attempóts to make an
. The phone
Note: You can also dial an emergency call by pressing and
holding 9 until the phone indicates it is attempting to make an
emergency call. However, this method does not work when
Keyguard is active or when the phone is connected to a
modem.
Activating Emergency key 9
Press Menu 4 1 1 (Settings - Call settings - Emergency
key 9), scroll to On to activate or Off to cancel, then
press OK.
IMPORTANT!
Official emergency numbers vary by location (e.g. 911). Only
one emergency number is programmed into your phone to be
dialed automatically by Emergency key 9, which may not be the
proper number in all circumstances.
Entering letters and numbers
You can enter letters, as well as numbers, when storing
information into your phone by using your phone’s
keypad. When you see the letter you wish to enter,
simply press the key associated with that letter until it
appears on the display (numbers also appear).
ABC mode
When you need to enter letters into your phone, it will
automatically switch over to
mode.
35
Your phone displays the
icon to indicate that your
phone is in ABC mode. It also displays when you are
viewing names rather than numbers.
When
is displayed, you can enter these characters:
Key Characters Key
Characters
PQRS7
1
2
3
4
5
6
.,’?!-1
ABC2
DEF3
GHI4
7
8
9
0
*
TUV8
WXYZ9
Enters an empty space, 0
(See next page)
JKL5
MNO6
#
Changes letter case; long
press toggles between
ABC/abc and 123 mode
While you’re editing a name, the V key will move the
cursor to the left, and W will move it to the right.
Press Clear to correct any mistakes.
If you wish to enter an empty space between
characters, press 0 for each space.
Changing letter case
Press the # key to switch between upper and lower
case letters. The
icon will switch to
to
indicate you are using lower case.
123 mode
When storing names to the phone book, you can enter
a number within a name at any time. Simply press that
particular number key a few times until it appears.
However, you can do this more quickly by accessing
the
mode, without having to scroll through each
letter to access the number you wish to enter.
Simply press the # key for about 2 seconds while in
mode and the
icon will appear. While in this
mode, only numbers can be entered. Letters can not be
entered unless your phone is in
36
mode.
Press the # key again for a couple of seconds if you
wish to deactivate the mode.
Special characters (for storing names)
key and the following special characters will appear.
You can use these characters to help when storing
names in your phone book. Simply press W or V to
highlight the one you wish to use and press Insert.
. , ? ! : ; - + # * ( ) ‘ “ _ @ & $ £ % / < > ¿ ¡ § = [ ] ¥
TIP: If you wish to access a special character that
appears toward the end of this list, press V for quicker
access.
Special Characters (for storing numbers)
The following special characters are helpful when you
press the * key once or repeatedly, and the following
characters can be stored within the number sequence.
(p) creates a pause when a number is dialed; the
digits located to the right of the “p” are automati-
cally sent as touch tones after a 2.5 second pause
(w) creates a “wait” when a number is dialed.
Send or
The “w”ómakes your phone wait for you to press
, then it sends the digits located to the
You can add as many special characters as you need
in a single number sequence. These characters can not
be entered while in
mode.
Erasing stored names and numbers
Erasing your entire phone book
37
Games
You have four exciting games to choose from in your
phone. Press Menu 6 to choose one of the following
games:
REMEMBER! Your phone must be switched on to use this
function. Do not switch on the phone when wireless phone use
is prohibited or when it may cause interference or danger.
Memory
Reveal pictures to find pairs in as few tries as possible.
Move the cursor with the 2 (up), 4 (left), 6 (right), and 8
(down) keys. Press the 5 key to reveal pictures. Press
the # key to jump right over revealed pictures or move
from top left to bottom right. Press the ∗ key to jump left
over revealed pictures or move from bottom right to top
left. Once found, pairs stay visible.
Snake
Feed the snake with as many goodies as possible and
watch it grow. Use keys 2, 4, 6, and 8 to turn the snake
toward food. The longer the snake’s tail grows, the
higher the score. If the snake hits its own tail or the
surrounding wall, the game is over.
Logic
Find a secret combination of figures. Available figures
are shown at the top of the display before you accept
the first guess row. Use the 2, 4 and 8 keys to move the
cursor and the 5 key to select the figure. To copy a
figure from a previously accepted guess row, start
scrolling with the 4 key, move the cursor to the desired
figure in the normal way and accept the selection with
the 5 key.
Once you think you have the right combination, press
the * key. The result is presented as a set of marks over
the row. A correct figure in the right place gives a full
mark; a correct figure in the wrong place gives a half
mark. The game ends when all the figures are correct
and in the right place.
38
Dice
Use this to play other games that require a set of dice if
one isn’t available. Use the Level option to set the num-
ber of dice, up to six. You can roll, lock, and unlock
each die as many times as you wish.
When you start a new game, the dice roll for a couple of
seconds and then stop. Use the 4 (left) and 6 (right) keys
to select a die. Press the 5 key to lock or unlock the
selected die.
Press ∗ to roll the unlocked dice again.
Game options
When you select a game, you can choose from the
following submenus:
Level allows you to choose the level of difficulty.
New game starts a new game.
Top score will display the top score (does not appear in
Logic).
Instructions will describe how the game is played.
Note: Last view or Continue may appear in the options list if a
game is interrupted, not finished, or if you have lost the game.
Inbox
When you receive a text message, it’s stored in the
Inbox. Your phone will display Message received, along
with the text message icon, and makes a sound
complete details on this feature.
In-call menu
While in a call, you may notice the Options soft key.
Pressing this will access you to the in-call menu, and
you may notice the following choices:
39
Touch tones You can manually enter a touch tone string
New call You can make a third party conference call
Menu Allows you access to your phone’s menu
Names Allows you access to your phone book
Mute Allows you to mute the microphone; if your micro
phone is already muted, this will change to End mute
Keyguard
This feature helps protect the keypad against accidental
keypresses.
the call?” on page 9 for complete details.
Keypad tones
This is one of the settings in your phone’s Profiles
when you press your phone’s keys.
Note that if you choose the Silent profile, keypad tones
will be turned off.
Setting the keypad tones
1. Press Menu 3 (Profiles)
2. Your phone lists each profile. Use W to highlight the
one you want to set the keypad tones for and
press Options.
3. Highlight Customize and press OK. Press W to
Keypad tones and press Select
4. Press W to scroll through the options; your phone
plays a sample of each. Press OK for the one you
want.
40
Language
Because many wireless phone cus-
tomers speak English as a second
language, your phone allows you to
choose your phone’s displayed
language.
Choosing a language for your phone
Press Menu 4 2 5 (Settings - Phone settings - Language),
scroll to the language you wish to use and press OK.
You can choose from English, French, Spanish,
Portuguese or Traditional Chinese.
Last call timer
This feature displays the duration of your last call.
Last number redial
When you want to call your last dialed number,
Press
ó
and wait 3 seconds
Note: You must be at the start screen before you press
ó
Letter case
You can change from upper to lower case when
entering letters into your phone.
Life timer
The life timer displays the total time of all calls dialed and
received with your phone (in hours and minutes only).
The life timer can not be reset and is used in conjunction
with your phone’s warranty
41
Lights
This is one of the settings in your phone’s Car Profile
lights are on only when you use your phone, or if they
are on at all times. This setting works only when your
phone is connected to a car kit.
1. Press Menu 3 (Profiles)
2. Your phone lists each profile. Use W to highlight Car
and press Options.
Note: Car will not appear in the list until the phone has been
connected to a car kit at least once.
3. Highlight Customize and press OK. Press W to
highlight Lights and press Select.
4. Use W to scroll through your choices and press OK
If you select Automatic, your phone’s lights are turned
off within fifteen seconds if no keys are pressed. If On is
selected, then the lights will remain on the entire time
your phone is connected to the car kit.
Listen to voice messages
This feature allows you to access your voice messages.
Lock code
You’ll need the lock code to activate and deactivate
code. The default lock code is 1234. If you enter an
incorrect lock code five times in a row, your phone will
Changing your lock code
In a lock code, only numeric characters are accepted.
1. Enter Menu 4 3 2 3 (Settings - Security settings -
Access codes - Change lock code)
2. Enter lock code at Enter lock code: and press OK
42
3. Enter new lock code, press OK
4. Verify new lock code, press OK
Note: When you change your lock code, make sure you store it
in a safe place, away from your phone. Avoid entering access
codes similar to emergency numbers to prevent accidental
emergency calls.
Manual touch tones
This setting determines how long touch tones are
produced as you press the keys on the keypad.
Note that touch tones are sometimes called DTMF
tones.
Setting manual touch tones
Press Menu 4 2 3 1 (Settings - Phone settings - Touch
tones - Manual touch tones) and highlight one of the
following options, then press OK.
Continuous means the tone sounds for as long as
you press and hold the key.
Fixed sets the tone length to .1 second, regardless
of how long you press the key.
Off turns the tones off, and no tones will be sent
when you press the keys.
Memory status
This feature allows you to see how many free and in-use
memory locations are in your directory.
Press Names, scroll to Options and press Select.
Then scroll to Memory status and press Select again
Messages
This feature allows you to access your voice and text
messages, as well as composing your own welcome
note.
43
Using messages
1. Press Menu 1 (Messages)
2. Scroll to one of the following options, then press
Select
Message alert tone
This is one of the settings in your phone’s Profiles
when you get a text message.
1. Press Menu 3 (Profiles)
2. Your phone lists each profile. Use W to highlight the
one you want to set the message alert tone for and
press Options.
3. Highlight Customize and press OK. Press W to
highlight Message alert tone, then press Select.
4. Use W to scroll through your choices (your phone
plays samples) and press OK.
Microphone
You can mute and unmute your phone’s microphone
while a call is in progress. During a call, your phone’s
soft keys change from Names and Menu to Options and
Mute.
Muting and unmuting your phone
You can mute the phone’s microphone during a call;
simply press Mute. To unmute the microphone, press
Unmute.
If these texts are not available, press Options, scroll to
Mute or End mute and press Select.
Muting and unmuting also affect the microphones of
any accessories connected to the phone.
44
Missed calls
Your phone will keep track of the last 10 calls you have
missed if you weren’t around to answer the call. Missed
calls will appear in your phone only if it was turned on
and in a service area when the call was missed.
If the display says ‘Missed calls’
Press List. To call back the displayed number, press
ó. Press Exit to go back to the start screen.
The ‘Options’ soft key
Checking the missed calls list anytime
Press Menu 2 1 (Call log - Missed calls), then scroll
through the list.
This shows you the phone numbers of the 10 most
recent calls you’ve not answered.
When the Forward if not answered option in the Call
phone treats the forwarded calls as missed calls.
NAM selection
The service provider programs your phone with the
phone number and system information into your
phone’s memory when your phone is first activated.
This is called a Number Assignment Module (NAM).
For example, your phone can be activated in up to 3
different service areas (e.g. one in Dallas, another in
Chicago, and maybe one more in New York), each
giving your phone a different phone number or account.
Only one number can be active at a time. When you
select a phone number, you’re also selecting which
tem” on page 63). The first phone number displayed
with this menu is the currently selected number.
45
Note: It may not be necessary to have three NAMs for your
phone if your service provider has service or roaming agree-
ments for each area in which you wish to use your phone.
Contact your service provider for details.
Selecting the NAM for your phone
Press Menu 4 4 6 (Settings - Network services - NAM
selection), highlight the phone number you want to use
and press OK.
Note: You need at least one active number to make calls.
You can not change from one NAM to another during a call.
Network feature setting
available through your service provider or dealer.
When you subscribe to any of these services, your
service provider or dealer gives you a separate feature
code to activate each service. Deactivation codes are
used to deactivate each service.
Once you store the appropriate code in your phone, the
service appears as a menu item. You can then use the
menu to activate and deactivate these services.
Each time you use a feature that requires a feature
code, that code is sent to the network to verify you’re
using the correct feature code.
Note: If your phone has more than one phone number pro-
grammed, any feature codes stored will apply only to your
primary phone number, or NAM 1.
Storing codes
1. Press Menu 4 4 5 (Settings - Network services -
Network feature setting)
2. At Feature Code:, enter the feature code or deacti-
vation code received from your dealer (e.g. ∗74,
∗740, etc.), press OK
46
3. W to the service that the code applies to and press
Select
4. W to suboption, then Select (Repeat step as
required, based on number of suboptions)
(Use step four only for call forwarding options)
5. W to Activate or Cancel, then press OK
Network services
Some of the features in this menu are network services
that require a subscription. See your service provider for
details and availability.
* These features will not appear in the menu unless they are
One-touch dialing
This feature allows you to make phone calls quickly and
easily with the touch of a button.
You must store names and numbers in your phone
Then you can assign a name from the phone book to a
one-touch dial location using your phone’s keys 2
through 8.
Note: Keys 1 and 9 are used exclusively for dialing your voice
phone (e.g. 911 or other official emergency number). The 2 key
be overwritten if you prefer.
47
Assigning one-touch dial locations
1. Press Names, scroll to 1-touch dialing and press
Select
2. Scroll to next available empty location, (empty) will
appear, then press Assign
3. Scroll to select desired name and press Select
4. Repeat as necessary
Calling a number using one-touch dialing
Note: The 2 key is for dialing a customer care operator, which
can be overwritten if you prefer.
Press and hold the key (2 through 8) for a few
seconds to call the number in the corresponding
one-touch dial location.
Note: If you press and hold 1, your phone calls your voice mail-
box. If you press and hold 9, and Emergency key 9 (Menu 4 1)
is ON, your phone attempts a call to the emergency number
programmed into your phone (e.g. 911 or other official emer-
gency number).
Changing numbers in one-touch dial list
With this feature, you can assign a different number to
any one-touch dial location.
1. Press Names, scroll to 1-touch dialing and press
Select
2. Scroll to the location you wish to change and press
Options
3. Scroll to Change, then press Select
4. Scroll through phone book to select new number
and press Select
Erasing one-touch dial locations
1. Press Names, scroll to 1-touch dialing and press Select
2. Scroll to the location you wish to erase and press
Options
3. Scroll to Erase, press Select, then press OK at
Erase?
48
Outbox
This is where all outgoing messages are stored.
Paging
You can receive pages with your phone.
Phone book
You can store up to 199 numbers and associated
names in your phone’s memory. These numbers are
right at your fingertips for easy dialing.
Things to know about the phone book
Stored numbers may be up to 32 digits long.
Stored names may be up to 16 characters long.
You can not store identical names into your phone
(i.e., John, John); make sure that like names are some-
what different in the phone book (i.e., John, Johnny).
Replace? followed by the currently stored name displays
when storing a name already in memory.
Accessing the phone book
Press Names, scroll to desired submenu and press
Select.
About the submenus
The phone book has several submenus from which you
can choose.
Search allows you to search for a specific name.
Add new allows you to enter new names and numbers.
Options lets you choose your scrolling view, as well as
to show memory status.
1-touch dialing allows you to assign up to seven one-
Caller groups allows you to rename or change the ringing
49
Erase all lets you erase every name and number in your
phone book. You can erase one name and number at a
time by pressing Details, then Options when viewing a
name already in the directory.
Storing a name and number
1. Press Names
2. Scroll to Add new and press
Select
3. Enter name using the keypad
(use # to switch between
upper and lower case) and press OK
4. Enter phone number and press OK
Changing a number stored with a name
1. Recall stored name, then press Details to view
number
2. Press Options, scroll to Edit and press Select
3. Press OK while name is displayed, unless you wish
to change it. If so, press and hold Clear, re-enter
name and press OK
4. Press and hold Clear to erase number or use the W
and V keys to edit
5. Enter new number
6. Press OK to save new number
Recalling names & numbers
At the start screen, press W or V to view names in
directory. Then scroll to the person you wish to call and
press
ó
to dial the number (phone will display
number dialed to confirm).
50
Recalling numbers by name
At the start screen, press Names. Then press the
number on the keypad with the corresponding first
letter of the name you wish to call.
You can also recall numbers by name by pressing
Names, then press Select at Search. Enter the name of
the person you wish to recall and press OK.
Erasing stored names and numbers
1. Recall stored name
2. Press Details
3. Press Options
4. Highlight Erase, then press Select, then OK
Note: You can not undo Erase functions, so be careful!
Erasing your entire phone book
1. Press Names
2. Scroll to Erase all and press Select
3. Press OK at Are you sure?
4. Enter security code at Security code: and press OK
Warning: This feature will erase your entire phone book,
which can not be undone!
Phone lock
When you turn this on, your phone will lock after you
switch your phone off and back on. Then, each time
you turn your phone on, it will prompt you for a lock
code when you press either Names or Menu.
When the phone lock is on, you can not access most of
your phone’s memory and menu features, or make
phone calls without entering the lock code.
Turning on phone lock
Press Menu 4 3 2 1 (Settings - Security settings - Access
codes - Phone lock). Enter the lock code then press OK.
Then scroll to On, and press OK again.
51
When your phone is locked, calls may be possible to
the emergency number programmed into your phone
(e.g. 911 or other official emergency number) including
You can also store a number in the Unlocked phone
number location, which allows you to call this number
details).
Answering a call with phone lock on
Press any key except
ô
and
Turning off phone lock
Press Menu 4 3 2 1 (Settings - Security settings - Access
codes - Phone lock). Enter lock code and press OK.
Then scroll to Off and press OK again.
With phone lock off, you can now use your phone
without entering the lock code each time you turn your
phone on.
Phone settings
Phone settings allow you access to other phone
features such as an alarm clock and your phone’s
language.
Using phone settings
Press Menu 4 2 (Settings - Phone settings), then scroll to
one of the following options, then press Select:
52
Profiles
Now you can adjust and customize
your phone to whatever envi-
ronments you find yourself in
(i.e. meetings, a movie, etc.).
With Profiles, you can control your
phone’s ringing volume, ringing tone, message alert,
keypad tones, warning and game tones, etc., in a
matter of seconds.
changes made in Profiles back to the factory defaults.
The default setting is Normal.
Accessing Profiles
Press Menu 3
Selecting different Profiles
If you want to change your phone’s Profile, quickly
press the
key. Quickly press
again to scroll
through each choice, then press and hold the key for
a second to select that Profile.
You can also scroll through the list of Profiles with a
quick press of the
key. Then press W or V to choose
another Profile and press OK.
Either way, this only allows you to select other Profiles;
you can not customize them here. Keep reading to
learn how to customize a Profile.
Customizing Profiles
Press Menu 3 (Profiles) and scroll to desired Profile, then
press Options.
Once Options is selected, Select, Customize and Rename
will appear as your choices. Once you have selected
one of these items, press OK. If you wish to go back to
the main menu, press Back.
Select activates the currently highlighted Profile.
53
Customize allows you to customize a Profile by changing
the current settings.
Rename allows you to rename the Profile.
When you select Customize, press OK and you’ll have
access to several lists and sub-menus that will enable
you to adjust the settings on the current Profile.
Note: Car and Headset will not appear in the Profiles list unless
your phone is connected to a car kit or a headset. However,
they will remain in the menu once connected for the first time.
Note: When you change a setting in the current Profile, it only
affects that Profile and will not change your phone’s normal
settings.
Renaming profiles
1. Press Menu 3 (Profiles)
2. Scroll to desired Profile and press Options
3. Scroll to Rename and press OK
4. Enter new name and press OK again
Note: Some profiles can not be renamed.
Received calls
This shows you the phone numbers of the 10 most
recent calls you’ve answered.
Press Menu 2 3 (Call log - Received calls), then scroll
through the numbers.
The ‘Options’ soft key
Restore factory settings
You can reset the settings of many of your phone’s
features to factory defaults (as in a new telephone).
54
Restoring factory settings
Press Menu 4 2 4 (Settings - Phone settings - Restore
factory settings), enter security code and press OK.
Note: The memory, timers, language selection and security
code is not reset. However, any Profiles you have modified will
reset when you restore your settings.
Renaming profiles
Restrict calls
This feature allows you to restrict incoming and
outgoing calls. Outgoing calls are restricted from a list
of restrictions that you create yourself.
Restrict outgoing calls
If no restrictions have been defined in your phone, you
will notice only one option:
Add restriction allows you to create your own list of
outgoing call restrictions. The maximum number of call
restriction groups you can define is 10.
Once you have entered Add restrictionand have added at
least one restriction, the following options will be added:
Select allows you to select call restrictions from the
outgoing calls list.
Edit allows you to edit an existing outgoing call
restriction.
Erase will erase any existing outgoing call restrictions.
Note: When calls are restricted, calls may be possible to the
emergency number programmed into your phone (e.g. 911 or
other official emergency numbers). However, Emergency key 9
may not operate depending on the type of restriction you choose.
Adding call restrictions
1. Press Menu 4 3 1 (Settings - Security settings -
Restrict calls)
55
2. Scroll to Restrict outgoing calls and press Select
3. Enter the security code and press OK
4. Scroll to Add restriction to create an outgoing call
restriction and press OK
5. Enter the number string you wish to restrict and
press OK. For example:
If you wish to restrict all calls that begin with 1,
enter 1 (this will restrict all long distance calls)
If you wish to restrict all calls that begin with 1972,
enter 1972
If you wish to restrict all calls that begin with 214,
enter 214
6. If you wish to enter a name for the call restriction,
enter the name using your phone’s keypad, then
press OK
Restrict incoming calls
1. Press Menu 4 3 1 (Settings - Security settings -
Restrict calls)
2. Scroll to Restrict incoming calls and press Select
3. Enter security code, then press OK.
4. Scroll to All calls and press Mark (or press Unmark
if you wish to remove the restriction)
5. Press Back and then press Yes at Save changes?
Selecting call restrictions
1. Press Menu 4-3-1 (Settings - Security settings -
Restrict calls)
2. Scroll to Restrict outgoing calls and press Select
3. Enter the security code and press OK
4. Scroll to Select and press OK
5. Scroll to each restriction you wish to use and press
Mark; press Unmark to deactivate existing restrictions
6. Press Back and then press Yes at Save changes?
56
Editing call restrictions
1. Press Menu 4-3-1 (Settings - Security settings -
Restrict calls)
2. Scroll to Restrict outgoing calls and press Select
3. Enter the security code and press OK
4. Scroll to Edit and press OK
5. Scroll to the restriction you wish to edit, press OK
Note: If no name has been entered for a restriction,
the restricted number will be displayed
6. Press and hold Clear to erase entire number, then
enter the new characters. Or use Wýor V to move
the cursor to the desired location and delete a
character or insert additional characters. Press OK
when finished.
7. Edit name if desired using same procedure as
above
Erasing call restrictions
1. Press Menu 4-3-1 (Settings - Security settings -
Restrict calls)
2. Scroll to Restrict outgoing calls and press Select
3. Enter the security code and press OK
4. Scroll to Erase and press OK
5. Scroll to the restriction you wish to erase, press OK
6. Press OK again to erase restriction
Ringing options
This is one of the settings in your phone’s Profiles
you of an incoming call. This setting does not affect
Selecting ringing options
1. Press Menu 3 (Profiles)
57
2. Your phone lists each profile. Use W to highlight the
one you want to set the ringing options for and
press Options.
3. Highlight Customize and press OK. Press W to
Ringing options, then press Select.
4. Highlight either Ring, Ascending, Ring once, Beep
once, Caller groups, or Silent and press OK
Caller groups sets the phone to Silent except for calls
Press W or V to highlight the desired caller group(s),
then press Mark to select or Unmark to de-select them.
Ringing tones
This is one of the settings in your phone’s Profiles (see
page 53). It sets the ringing tone for incoming voice calls.
once, ringing tones are automatically off.
Selecting ringing tones
1. Press Menu 3 (Profiles)
2. Your phone lists each profile. Use W to highlight the
one you want to set the ringing tones for and press
Options.
3. Highlight Customize and press OK. Press W to
Ringing tones, then press Select.
4. Scroll through the options. After you hear the tone
you wish to use, press OK.
Ringing volume
This is one of the settings in your
sets the default ringing volume for
incoming voice calls, message alert
tones and the alarm.
58
Setting the ringing volume
1. Press Menu 3 (Profiles)
2. Your phone lists each profile. Use W to highlight the
one you want to set the ringing volume for and
press Options.
3. Highlight Customize and press OK. Press W to
Ringing volume, then press Select.
4. Scroll through the options. When you hear the
volume level you wish to use, press OK.
Note: The ringing volume setting is stored individually for the
handsfree car kit and the headset.
Roaming
This is a term used to indicate that your phone is not in
its home area. Calls made or received while roaming are
usually more expensive than calls made in your home
area.
When roaming in some systems outside your home
area, your phone may not be recognized by the host
system (the one you’re travelling in) and you may not be
able to place a call.
Contact your service provider for more specific informa-
tion on how roaming works with your phone, as well as
any information on coverage limitations.
Roaming Indicators
When your phone begins roaming, it will beep once and
display ROAM or EXTENDED AREA, depending on how
roaming works with your phone. Contact your service
provider for more details. If your phone is not roaming
(i.e. in its home area) it will either display HOME or the
name of the service provider.
Saved
This is where saved text messages are stored.
59
Scrolling view
There are three different options on how you can view
the phone book. Your choices are:
Name list shows all stored names in a scrolling list.
Three names will appear at any given time. To view
other names in the directory, scroll back and forth
through the list using W or V. Name list is the default
setting.
Name+number displays individual names and numbers
stored in your directory. Only one name will display on
your screen at a time, with the corresponding phone
number. Use W or V to view other names.
Name only shows individual names only. To view other
names, use W or V. You can view the corresponding
phone number by pressing Details, then W or V.
Selecting your scrolling view
1. Press Names
2. Scroll to Options, then press Select
3. Press Select at Scrolling view
4. Press W or V to select either Name list,
Name+number, or Name only, then press OK
Security settings
This menu includes the following security features:
The Access codes submenu includes Phone lock
Security code
Your phone will prompt you for a security code for cer-
tain features. These features can be used only after the
correct security code has been successfully entered.
60
Note: When entering your security code, ***** will appear on the
display to keep others from viewing your code.
If you make a mistake entering the code, erase the last
digit entered by pressing Clear, or press and hold Clear.
Then enter the correct code or press Back to exit the
current feature.
If you enter an incorrect security code (Code error will
appear) five times in a row, your phone won’t accept
any entries for the next five minutes.
Your phone’s default security code is 12345. It’s highly
recommended that you change this code at once, write
it down, and store it in a safe place away from your
phone.
Changing your security code
1. Press Menu 4 3 2 4 (Settings - Security settings -
Access codes - Change security code)
2. Enter security code and press OK
3. Enter new security code at Enter new security
code:, press OK
4. Enter new security code again at Verify new security
code:, press OK
5. Phone will display Security code changed
Note: If you have changed your security code and don’t
remember the new code, contact your service provider.
Once you have changed your security code, the default setting
is no longer valid.
Send own number
In most service areas, when you call someone your
name will be presented to his/her caller ID (if they sub-
scribe). This feature allows you to block their caller ID
(i.e. your number will not be presented) when you call
them. This feature works on a per-call basis. Contact
your service provider for more details.
Note: Before you can deactivate this feature, you must first
store the feature code given to you by your service provider.
61
Otherwise, this feature may not appear in the menu.
Note: This feature is only effective when calling to a number that
is equipped with Caller ID.
1. Press Menu 4 4 4 (Settings - Network services - Send
own number)
2. W to Yes (to show your number) or No (to not show
it) and press OK
3. Enter the number you wish to call (or press Search
to retrieve the number from the phone book and
press OK), then press OK
4. Your phone will attempt to call this number with
the feature code you stored in Menu 4 4 5
Settings
This main menu allows you access to other features.
See these individual entries for more information.
Storing a name & number
You can save names and numbers in the Phone book.
Either use the method described in “Storing a name and
number” on page 50 or the “quick save” method
described below.
Quick save
Enter the phone number and press Save. Enter a name
at Name: if you wish (optional), then press OK.
62
System
Your phone is capable of working in Residential, Private,
and Public Systems (such as your Home System). You
can choose how your phone selects a network to use.
This feature is Menu 5 in your phone. The default is
Automatic, which means your phone automatically
searches for networks available to you and chooses the
appropriate one. Every time you switch on your phone,
it resets this to Automatic.
If you choose Manual, your phone searches for net-
works, then begins displaying them. Your phone
displays AVAILABLE: or NOT AVAILABLE: for the systems
it finds (You can not use NOT AVAILABLE: systems). Use
the W key to scroll through the choices, and press OK
when you see the one you want.
If you choose New Search, your phone begins a new
search for new Private and Residential systems. When
it finds the best new system, it displays it. You can then
Select it, or start another search by pressing Next.
Note: If you have two phone numbers (two NAMs), the Manual
and New search features are only used with your primary
more information concerning NAMs.
To switch from private to public
If you are in a private system and want access to a
public system, press and hold Menu when you are not
in a call. Your phone will display Search public systems?,
press OK and your phone will use the public system for
the next (only once) outgoing call. After that it goes back
to Automatic system selection.
Text messages and pages
Before you can send or receive text messages and
pages, you must subscribe to the text messaging
network service.
63
Some or all of these features may not be available in
some wireless systems. Please see your service
provider for details and availability.
Note: Text messages that you receive with your phone may
appear different at times, due to messages that originate in
networks other than your own.
Also, the maximum length of a text message may depend on
the network’s capabilities.
Text message options
When you access Text messages, you will view a screen
with five different options.
Inbox is where incoming messages are received and
stored. All new, unread messages are kept here.
Write new allows you to write text messages.
Outbox is where outgoing messages are stored.
Saved is where all saved, read messages are kept.
Erase all allows you to erase all text messages. However,
unread text messages will not be erased. Erase all can
be found quickly when you access Text messages by
pressing V.
Writing text messages
Note: Writing and sending text messages may not be available
in all wireless systems. Please contact your service provider for
details.
Sending text messages
1. Press Menu 1 1
2. Scroll to Write New and press Select
3. Write your message using the keypad and press
Options
4. To send the text message, press OK with Send
highlighted
5. Enter the phone number (or press Search to locate
in the phone book), then press Send
64
Sending options
If you press Options when sending a text message,
you’ll find the following choices:
Send sends the message
Settings allows you to mark your messages (see below)
Save will save your message to the Saved folder.
Clear screen will clear the message screen.
Message settings
Urgent will notify recipient that your message is important.
When you receive an Urgent message, the message will
be marked with an exclamation point (!) in front of it.
Read receipt notifies you that the recipient has opened
your message.
Callback no. will place your phone number within the
message. This is the default setting and it is set to on.
Receiving text messages
Your phone has space for up to 30 text messages,
depending on the length of each message.
When you receive a text message
Text messages are shown in the order that they were
received, in their order of priority.
Message received indicates an unread message or page.
If more than one message is received, the number of
received messages will be listed first.
New emergency message indicates that the message or
page received was sent by someone via the service
provider. Emergency messages are sent only in
situations where life and/or property are in immediate
danger. Emergency messages are listed first and will
override all other messages.
Urgent messages are also high priority messages.
65
Reading text messages
With Message received displayed, press Read and scroll
to new message, then press Read again
Reading options
Press Options while a text message is displayed to
access the following reading options:
Read next allows you to read the next message.
Erase will erase the message.
Save will save the message to the Saved folder.
Call back will automatically call whoever sent the
message if any phone numbers are included within the
message.
Forward allows you to forward the message to someone
else.
Reply allows you to reply to the received message.
Calling someone back in a message
Press
number quickly.
ó
while the message is displayed to dial the
Or, with the message and the phone number displayed
on your phone’s screen, you can press Options, scroll
and select Call back, then press OK.
Note: If more than one number is on the display, the numbers
to call and press
display No number found on this screen.
are displayed in aólist. Simply select the phone number you want
. If no numbers are found, your phone will
Forwarding a message
Note: This feature is only available if your phone has been
activated in a wireless system that supports the sending of
text messages.
With the message displayed, press Options, scroll to
Forward and press OK. Then send the message as you
normally would.
66
Replying to a message
Note: This feature is only available if your phone has been
activated in a wireless system that supports the sending of
text messages.
With the message displayed, press Options, scroll to
Reply and press OK. Then write your reply and send the
message as you normally would.
If a phone number appears in the message you received,
it’s used as the default for the reply you’re sending.
This can be replaced by another number, if you wish.
Receiving a page
Your phone displays Message received. The message
reads Call:, followed by the name or number of the
person who paged you. Names will appear only if that
person has been stored in the phone book.
When your phone’s memory is full
One or more messages, of lowest priority, will automa-
tically be deleted in order to receive new text messages
when your phone’s memory is full.
If the message memory is still full, your phone will
display No space: message waiting. You can clear this
notification by pressing OK.
Note: Messages are usually deleted from your Inbox. An incoming
emergency message may delete messages from your Saved
folder.
Touch tones
Your phone can generate various sounds, called touch
tones, when the keys are pressed. These are also
known as DTMF tones.
Touch tones can be used for many automated, over-
the-phone services such as checking bank balances,
airline arrival and departure times, and using voice
mailbox options. Touch tones can be sent only when a
call is active.
67
Storing touch tone strings
Touch tone strings can be used for sending and
receiving information with your phone. For example,
you can store your office voice mailbox number, along
with your password for easy access to your messages.
Store touch tone strings the same way you store
You can store a whole digit sequence in your phone
book and send it as touch tones for frequently-used
strings of numbers.
Sending a touch tone string
Make sure Menu 4 2 3 1 (Settings - Phone settings -
Touch tones - Manual touch tones) is not set to Off.
1. During a call, press Options
2. Scroll to Touch tones and press OK
3. Enter touch tone string or recall string from the
phone book and press OK
Note: Use caution when sending confidential information over
the air when using DTMF tones in analog mode.
Storing touch tone strings with phone numbers
1. Enter the phone number (e.g. your office voice
mailbox)
2. Press ∗∗∗ (p) or ∗∗∗∗ (w)
3. Enter the touch tone string (e.g. voice mailbox
password)
4. Store the number as you normally would
page 37 for details on “p” and “w” characters.
When you dial this number, your phone first dials the
phone number, then waits (because of the “w”
character) for you to press Send. Your phone then
sends your password.
If you include a “p” character instead of a “w”, your
phone pauses for 2.5 seconds, then automatically
sends your password as touch tones.
68
Touch tone length
This feature determines the length of each touch tone
when they are sent automatically.
Short sets the tone length to .1 second. Long sets the
tone length to .5 second.
You can set the touch tone length by pressing Menu
4 2 3 2 (Settings - Phone settings - Touch tones - Touch
tone length).
Unlocked phone number
be made. However, you can store one number into your
phone that can be called when it’s locked.
Storing the unlocked phone number
1. Press Menu 4 3 2 2 (Settings - Security settings -
Access codes - Unlocked phone number)
2. Enter lock code and press OK
3. Enter phone number at Number: (or press Search
and scroll through the phone book)
4. Press OK
Calling the unlocked phone number
Note: Your phone must be locked to use this feature.
Press W or V once, then
enter the phone number as it is stored and press
ó
or you can manually
ó
.
Vibrating alert
This is one of the settings in your phone’s Profiles
battery attached, you can set your phone to vibrate
when you receive a voice call.
Note: This setting will not appear in your phone unless a
vibrating battery has been attached.
69
Activating vibrating alert
1. Press Menu 3 (Profiles)
2. Your phone lists each Profile. Use W to highlight the
one you want to set the vibrating alert for and press
Options.
3. Highlight Customize and press OK. Press W to reach
Vibrating alert, then press Select again.
4. Use W to highlight On or Off and press OK. If you
choose On, your phone will vibrate even if you have
"The vibrating battery does not vibrate when the phone is
connected to or placed in any charging device."
Voice mailbox number
This number dials your voice mailbox.
Voice messages
Voice mail is a network service that may require a
subscription from your service provider.
Your phone will notify you when you receive a voice
message. New voice message will appear on the display
along with the
icon, and you’ll hear a short beep.
Your phone will display the number of voice messages
if you’ve received more than one.
Setting up your voice mailbox number
Before you can retrieve any voice messages, you need
to store your voice mailbox number. Your service
provider usually gives this number to you.
When you’re ready to store your voice mailbox number,
press Menu 1 2 2 (Messages - Voice messages - Voice
mailbox number). Then enter your voice mailbox phone
number and press OK. This number can be up to 32
digits long and is used until it’s changed. So if your
phone number changes, you may need to change your
voice mailbox number along with it.
70
Greetings, passwords, and prompts
These may vary in different wireless systems. So if you
need information about how to record your greeting or
how to store your password, contact your service
provider. You’ll also need to contact them on how to
listen to voice messages once you’re connected to your
voice mailbox.
Listening to your voice messages
If New voice message is displayed, just press Listen and
follow the prompts. If you’d rather listen to your
messages later, press Exit.
You can listen to messages anytime if you press and
hold the 1 key; Calling voice mailbox will appear on the
display. Or if you prefer, you can access your voice
mailbox by pressing Menu 1 2 1 (Messages - Voice
messages - Listen to voice messages).
Voice privacy
Note: This feature may not be available in all areas. Please see
your service provider for details and availability.
Used only in digital networks, voice privacy encrypts the
voice channel so that people can not eavesdrop on
your conversation.
Voice privacy will become active only during a call and
will notify you with a beep. Voice privacy active will also
appear on the display.
If you turn this feature on and voice privacy becomes
inactive for any reason, your phone displays Voice
privacy not active and beeps.
You may set this to On or Off by pressing Menu 4 4 1
(Settings - Network services - Voice privacy).
Volume
You can adjust the ringing volume and earpiece volume
with your phone.
71
Warning and game tones
This is one of the settings in your phone’s Profiles
your phone makes for conditions such as errors, confir-
mations, power on, battery low, recharge battery and
games. You can set warning and game tones on or off.
Turning warning and game tones on and off
1. Press Menu 3 (Profiles)
2. Your phone lists each Profile. Use W to highlight the
one you want to set the warning and game tones
for and press Options.
3. Highlight Customize and press OK. Press W to
Warning and game tones, then press Select.
4. Scroll to On or Off and press OK
Welcome note
You can program a welcome note into your phone to
display a message when you first turn it on (i.e. hello,
your name, a reminder, etc.). The maximum length is 36
characters.
1. Press Menu 1 3 (Messages - Welcome note)
2. Enter new message or edit an existing one, then
press Options
3. Press W to Save or Erase and press OK
The welcome note displays each time your phone is
switched on. Characters you enter are added to the left of
the cursor. Press Clear to delete characters to the left of
the cursor. Press W or V to move the cursor right or left.
Write new
This feature allows you to write text messages with your
phone.
72
6. Accessories
If you want to enhance your phone’s functionality, an
extensive range of accessories is available for you.
You can select any of these items to help accommodate
your specific communication needs. For availability of
these and other accessories, contact your service
provider.
A few practical rules for accessory operation:
Keep all accessories out of reach of small children.
When you disconnect the power cord of any
accessory, grasp and pull the plug, not the cord.
Check regularly that any vehicle-installed accesso-
ries are mounted and are operating properly.
Installation of any complex car accessories must
be made by qualified personnel only.
Use only batteries, chargers and accessories approved by the
phone manufacturer for use with this particular phone model.
The use of any other types may invalidate any approval or
warranty applying to the phone, and may be dangerous.
Batteries
The following table shows battery options that are
available for your phone, charging times with the Rapid
Travel Charger (ACP-9U) and the Standard Travel
Charger (ACP-7U), talk times, and standby times.
Consult your service provider for more information.
73
Charging Times
ACP-7U ACP-9U
Charger Charger
Battery Option
BPS-1 Ultra Slim Li-Polymer Battery 600 mAh
BLS-2N Extended Li-Ion Battery 900 mAh
2 hrs 30 min 1 hr 20 min
4 hrs
4 hrs
2 hrs
BMS-2/BMS-2S Extended NiMH Battery
900 mAh
1 hr 30 min
BMS-2V Vibrating NiMH Battery 900 mAh
BLS-4 Extended Li-Ion Battery 1500 mAh
4 hrs
5 hrs
1 hr 30 min
3 hrs 30 min
Note: The times displayed above are approximate and will allow
your battery to obtain approximately 80% of its capacity. At this
time, the battery scroll bars on your phone’s display will stop
scrolling. If you wish to obtain 100% battery capacity, please
allow another two hours to “trickle” or “maintenance” charge.
Standby and Talk Times
Digital
Talk Time Talk Time
Analog
Standby
Time
Battery Option
BPS-1 Ultra Slim
Li-Polymer Battery
600 mAh
1 hr 20 min to
2 hrs 10 min
40 min to
1 hr 15 min 20 to 33 hrs (ana)
66 to 133 hrs (dig)
BLS-2N Extended
Li-Ion Battery
900 mAh
2 hrs to
3 hrs15 min
1 hr to
100 to 200 hrs (dig)
1 hr 50 min 30 to 50 hrs (ana)
BMS-2/BMS-2S
Extended NiMH Battery
900 mAh
2 hrs to
3 hrs15 min
1 hr to
100 to 200 hrs (dig)
1 hr 50 min 30 to 50 hrs (ana)
BMS-2V Vibrating
NiMH Battery
900 mAh
2 hrs to
3 hrs15 min
1 hr to
100 to 200 hrs (dig)
1 hr 50 min 30 to 50 hrs (ana)
BLS-4 Extended
Li-Ion Battery
1500 mAh
3 hrs 10 min to 1 hr 35 min to 170 to 335 hrs (dig)
5 hrs 10 min 2 hrs 50 min 50 to 83 hrs (ana)
Note: The times shown are approximate. Battery operation
times vary according to signal conditions, network parameters
set by the service provider, and how you use your phone.
74
Chargers & other accessories
The following chargers and other accessories are
available for your phone; please see your dealer for
details. Also, refer to the accessories brochure that was
included in your sales package for the entire line of
Nokia Original Accessories.
Note: When a charger is not in use, disconnect it from the pow-
er source. Do not leave the battery connected to a charger for
longer than a week, since overcharging may shorten its life. If left
unused, a fully charged battery will discharge itself over time.
Standard Travel Charger
(ACP-7U)
This lightweight (187g) and
durable AC charger can be
used with all battery options.
To use the Standard Travel
Charger, plug it into a wall out-
let and connect the lead from
the charger to the base of your
phone. The charger can also be used together with the
Compact Desktop Charging Stand (DCH-9).
Rapid Travel Charger (ACP-9U)
This lightweight (100g) AC charger
can be used with all battery options.
Calls can be made during charging,
even with a fully discharged battery.
To use the Rapid Travel Charger
(ACP-9U), plug it into a standard
120V AC wall outlet, and connect the
lead from the charger to the base of
your phone.
The charger can also be used together with the optional
Compact Desktop Charging Stand (DCH-9).
Approximate charging times for discharged batteries
are shown at the beginning of this section.
75
Rapid Mobile Charger (LCH-8)
You can charge your
phone’s battery from
your vehicle battery by
using the Rapid Mobile
Charger (LCH-8). You
can also use this light-
weight charger with the
Compact Desktop Charging Stand (DCH-9).
Calls are possible during charging. A green light
indicates the charger is ready for charging (when not
charging) or finished charging (if it has been charging).
The battery charging times are the same as those for
the Rapid Travel Charger (ACP-9U)
The input voltage range is from 11 to 32V DC, negative
grounding. Avoid prolonged charging with the Rapid
Mobile Charger (LCH-8) when the car engine is not
running; this may cause the battery of your car to drain.
Note also that in some cars the cigarette lighter plug is
not provided with electricity if the ignition is not
switched on.
Compact Desktop Charging Stand (DCH-9)
Used together with the
Standard Travel Charger
(ACP-7U) or the Rapid Travel
Charger (ACP-9U), the
Compact Desktop Charging
Stand (DCH-9) is an eco-
nomical choice when you
need your phone close at hand, always ready for calls.
This charging stand allows you to charge your phone’s
battery in the front charging slot, plus a spare battery in
the rear charging slot.
When charging both batteries simultaneously, charging
will begin in the front charging slot and then move to the
rear slot once the front battery is 100% charged.
76
Please refer to the chart below for charging times in the
rear charging slot.
DCH-9 Rear Slot Charging Times
Using ACP-7U
Using ACP-9U
Battery Option
When front When front When front When front
slot empty
occupied
slot empty
3 hrs
occupied
BPS-1Ultra Slim
Li-Polymer Battery
600 mAh
4 hrs
30 min
6 hrs
30 min
4 hrs
30 min
BLS-2N Extended
Li-Ion 900 mAh
BMS-2/BMS-2S
Extended
NiMH 900 mAh
6 hrs
30 min
8 hrs
30 min
4 hrs
10 min
5 hrs
25 min
BMS-2V Vibrating
NiMH 900 mAh
BLS-4 Ultra
Extended
Li-Ion 1500 mAh
15 hrs
40 min
10 hrs
30 min
12 hrs
8 hrs
Note: Please note that if you are charging a battery in the rear
charging slot while another battery occupies the front slot,
please allow an additional two hours for a “maintenance”
charge for the battery in the front slot. Please see page 74
for charging times for the front charging slot.
If you’re charging a battery in the front charging slot,
charging is indicated by the scrolling battery bars on the
right side of your phone’s display. When the scrolling
stops, the battery is approximately 80% charged.
A battery will be fully charged a couple of hours after
the scrolling stops.
Also, you may notice a light indicator on the stand,
which is used for charging a spare battery. A green light
indicates a battery is at least 80% full; the red light
indicates a battery is charging.
77
7. Troubleshooting
What if charging fails?
If Not charging is displayed, charging is suspended.
Make sure the battery is connected to an approved
charging device and that the battery is at room temper-
ature. Extreme temperatures, hot or cold, can affect
your battery’s performance and prevent charging.
If charging still fails, disconnect the charger from your
phone. Then reconnect the charger to your phone and
retry. If you still experience charging problems, contact
your dealer and, if necessary, bring your phone in to
have it serviced. Also remember to bring in your battery
and charger.
No service
If you’re outside the wireless service area, No service will
display on your phone. No calls can be made or
received, however, emergency 911 calls may still be
possible.
What if the call doesn’t go through?
Your phone can make and receive calls only when it’s
switched on and in the wireless network’s service area.
No service means that you’re probably outside the wire-
less service area. No calls can be made or received.
Check call restrictions means calls to the phone number
page 51).
Note: Check with your service provider for information about
when you need to dial a ‘1’ and/or an area code in addition to
the number.
If you make a mistake dialing
Press Clear to delete the last character entered, or
press and hold Clear to delete all characters entered.
78
8. Reference Information
Important Safety Information
Traffic Safety
Do not use a hand-held telephone while driving a vehicle.
If using a hand-held phone park the vehicle before conversing.
Always secure the phone in its holder; do not place the phone
on the passenger seat or where it can break loose in a collision
or sudden stop.
The use of an alert device to operate a vehicle’s lights or horn
on public roads is not permitted.
Remember, road safety always comes first!
Operating Environment
Remember to follow any special regulations in force in any area
and always switch off your phone whenever it is forbidden to
use it, or when it may cause interference or danger.
When connecting the phone or any accessory to another de-
vice, read its user’s guide for detailed safety instructions. Do not
connect incompatible products.
As with other mobile radio transmitting equipment, users are
advised that for the satisfactory operation of the equipment and
for the safety of personnel, it is recommended that the equip-
ment should only be used in the normal operating position (held
to your ear with the antenna pointing over your shoulder).
Electronic Devices
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic equipment
may not be shielded against the RF signals from your wireless
phone.
Pacemakers
Pacemaker manufacturers recommend that a minimum separa-
tion of 6 inches (20 cm.) be maintained between a handheld
wireless phone and a pacemaker to avoid potential interference
with the pacemaker. These recommendations are consistent
with the independent research by and recommendations of
Wireless Technology Research. Persons with pacemakers:
•
Should always keep the phone more than 6 inches (20 cm)
from their pacemaker when the phone is switched on;
79
•
•
Should not carry the phone in a breast pocket;
Should use the ear opposite the pacemaker to minimize
the potential for interference.
•
If you have any reason to suspect that interference is
taking place, switch off your phone immediately.
Hearing Aids
Some digital wireless phones may interfere with some hearing
aids. In the event of such interference, you may want to consult
your service provider.
Other Medical Devices
Operation of any radio transmitting equipment, including cellular
phones, may interfere with the functionality of inadequately
protected medical devices. Consult a physician or the manufac-
turer of the medical device to determine if they are adequately
shielded from external RF energy or if you have any questions.
Switch off your phone in health care facilities when any regula-
tions posted in these areas instruct you to do so. Hospitals or
health care facilities may be using equipment that could be
sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles (e.g. electronic
fuel injection systems, electronic anti-skid (anti-lock) braking
systems, electronic speed control systems, air bag systems).
Check with the manufacturer or its representative regarding
your vehicle. You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted notices so
require.
Potentially Explosive Atmospheres
Switch off your phone when in any area with a potentially explo-
sive atmosphere and obey all signs and instructions. Sparks in
such areas could cause an explosion or fire resulting in bodily
injury or even death.
80
Users are advised to switch off the phone while at a refueling
point (service station). Users are reminded of the need to ob-
serve restrictions on the use of radio equipment in fuel depots
(fuel storage and distribution areas), chemical plants or where
blasting operations are in progress.
Areas with a potentially explosive atmosphere are often but not
always clearly marked. They include below deck on boats;
chemical transfer or storage facilities; vehicles using liquefied
petroleum gas (such as propane or butane); areas where the air
contains chemicals or particles, such as grain, dust or metal
powders; and any other area where you would normally be
advised to turn off your vehicle engine.
Vehicles
Only qualified personnel should service the phone, or install the
phone in a vehicle. Faulty installation or service may be danger-
ous and may invalidate any warranty which may apply to the
unit.
Check regularly that all wireless phone equipment in your
vehicle is mounted and operating properly.
Do not store or carry flammable liquids, gases or explosive
materials in the same compartment as the phone, its parts or
accessories.
For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including both
installed or portable wireless equipment, in the area over the air
bag or in the air bag deployment area. If in-vehicle wireless
equipment is improperly installed and the air bag inflates,
serious injury could result.
Switch off your phone before boarding an aircraft. The use of
wireless telephones in an aircraft may be dangerous to the
operation of the aircraft, disrupt the wireless telephone network
and may be illegal.
Failure to observe these instructions may lead to the suspension
or denial of telephone services to the offender, or legal action, or
both.
81
Emergency Calls
IMPORTANT!
This phone, like any wireless phone, operates using radio
signals, wireless and landline networks as well as user-pro-
grammed functions which can not guarantee connection in all
conditions. Therefore, you should never rely solely upon any
wireless phone for essential communications (e.g. medical
emergencies).
Remember, to make or receive any calls the phone must be
switched on and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless phone net-
works or when certain network services and/or phone features
are in use. Check with local service providers.
Making an Emergency Call
1. If the phone is not on, switch it on
2. Press the
ô
key to ready the phone for calls.
(Press it twice if there are still digits on the display.)
3. Key in the emergency number for your present
location (e.g. 911 or other official emergency
number). Emergency numbers vary by location.
4. Press
ó
If certain features are in use (keyguard, restrict calls, etc.), you
may first need to turn those features off before you can make an
emergency call. Consult this document and your local cellular
service provider.
When making an emergency call, remember to give all the ne-
cessary information as accurately as possible. Remember that
your wireless phone may be the only means of communication
at the scene of an accident - do not cut off the call until given
permission to do so.
82
Radio Frequency (RF) Signals
THIS MODEL PHONE MEETS THE GOVERNMENT’S
REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the emission limits
for exposure to radiofrequency (RF) energy set by the Federal
Communications Commission of the U.S. Government.
These limits are part of comprehensive guidelines and establish
permitted levels of RF energy for the general population.
The guidelines are based on standards that were developed
by independent scientific organizations through periodic and
thorough evaluation of scientific studies. The standards include
a substantial safety margin designed to assure the safety of all
persons, regardless of age and health.
The exposure standard for wireless mobile phones employs a
unit of measurement known as the Specific Absorption Rate, or
SAR. The SAR limit set by the FCC is 1.6 W/kg.* Tests for SAR
are conducted using standard operating positions accepted by
the FCC with the phone transmitting at its highest certified power
level in all tested frequency bands. Although the SAR is deter-
mined at the highest certified power level, the actual SAR level of
the phone while operating can be well below the maximum value.
This is because the phone is designed to operate at multiple
power levels so as to use only the power required to reach the
network. In general, the closer you are to a wireless base station
antenna, the lower the power output.
Before a phone model is available for sale to the public, it must
be tested and certified to the FCC that it does not exceed the
limit established by the government-adopted requirement for safe
exposure. The tests are performed in positions and locations
(e.g., at the ear) as required by the FCC for each model. The
highest SAR value for this model phone when tested for use at
the ear is 1.46 W/kg. While there may be differences between
the SAR levels of various phones and at various positions, they
all meet the government requirement.
The FCC has granted an Equipment Authorization for this model
phone with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. SAR information on this
model phone is on file with the FCC and can be found under the
Display Grant section of http://www.fcc.gov/oet/fccid after
searching on FCC ID LJPNSW-3AX.
_____________________________________________________
*In the United States and Canada, the SAR limit for mobile phones
used by the public is 1.6 watts/kg (W/kg) averaged over one
gram of tissue. The standard incorporates a substantial margin
of safety to give additional protection for the public and to
account for any variations in measurements.
83
Care and Maintenance
Your phone is a product of superior design and craftsmanship
and should be treated with care. The suggestions below will
help you to fulfill any warranty obligations and allow you to enjoy
this product for many years. When using your phone, battery,
charger, OR any accessory:
•
•
•
•
Keep it and all its parts and accessories out of small
children’s reach.
Keep it dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.
Do not use or store it in dusty, dirty areas as its moving
parts can be damaged.
Do not store it in hot areas. High temperatures can shorten
the life of electronic devices, damage batteries, and warp
or melt certain plastics.
•
Do not store it in cold areas. When the phone warms up
(to its normal operating temperature), moisture can form
inside the phone, which may damage the phone's elec-
tronic circuit boards.
•
•
•
Do not attempt to open it. Non-expert handling of the
device may damage it.
Do not drop, knock or shake it. Rough handling can break
internal circuit boards.
Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean it. Wipe it with a soft cloth slightly
dampened in a mild soap-and-water solution.
•
•
Do not paint it. Paint can clog the device’s moving parts
and prevent proper operation.
Use only the supplied or an approved replacement
antenna. Unauthorized antennas, modifications or attach-
ments could damage the phone and may violate regula-
tions governing radio devices.
•
If the phone, battery, charger, or any accessory is not
working properly, take it to your nearest qualified service
facility. The personnel there will assist you, and if neces-
sary, arrange for service.
84
9. Technical Data
Wireless System
Weight
Dual-Band TDMA and AMPS
165g (5.8 oz) with BMS-2/
BMS-2S 900 mAh NiMH Battery
140 cc
Size
Frequency Range
Lowband
824.04 - 848.97 MHz (TX)
869.04 - 893.97 MHz (RX)
1850.04 - 1909.92 MHz (TX)
1930.08 - 1989.96 MHz (RX)
Highband
Transmitter Output Power
Up to 600mW nominal
Battery Voltage
Charging current
3.6 V nominal
850 mAh max.
Operating Temperature -20°C to + 40°C
(-4°F to + 104°F)
Number of Channels 832 lowband
1997 highband
Number of NAMs
Memory Locations
Memory Capacity
3
199
Alpha: 16 digits per location
Numeric: 32 digits per location
Nokia, Connecting People and the Original Accessories logos
are trademarks of Nokia Corporation and/or its affiliates.
The information contained in this phone was written for dual-
mode TDMA and AMPS phones.
The right to make changes and improvements to any of the
products described in this guide without prior notice is reserved.
© 2001 Nokia Inc. All rights reserved.
These commodities are authorized by the U.S. Government for
export only to Canada, Mexico, or the United States. They may
not be resold, diverted, transferred, or otherwise disposed of in
any other country, either in their original form or after being
incorporated through an intermediate process into other end-
items, without the written approval of the U.S. Department of
State.
Part No. 9352384 Issue No. 4 Phase 3 Printed in Canada 01/01
85
10. NOKIA One-Year Limited
Warranty
Nokia Inc. (“Nokia”) warrants that this cellular phone (“Product”)
is free from defects in material and workmanship that result in
Product failure during normal usage, according to the following
terms and conditions:
1. The limited warranty for the Product extends for ONE (1) year
beginning on the date of the purchase of the Product.
2. The limited warranty extends to the original purchaser of the
Product (“Consumer”) and is not assignable or transferable to
any subsequent purchaser/end-user.
3. The limited warranty extends only to Consumers who
purchase the Product in the United States.
4. During the limited warranty period, Nokia will repair, or replace,
at Nokia's option, any defective parts, or any parts that will not
properly operate for their intended use with new or factory rebuilt
replacement items if such repair or replacement is needed
because of product malfunction or failure during normal usage.
No charge will be made to the Consumer for any such parts.
Nokia will also pay for the labor charges incurred by Nokia in
repairing or replacing the defective parts. The limited warranty
does not cover defects in appearance, cosmetic, decorative or
structural items, including framing, and any non-operative parts.
Nokia's limit of liability under the limited warranty shall be the
actual cash value of the Product at the time the Consumer
returns the Product for repair, determined by the price paid by
the Consumer for the Product less a reasonable amount for
usage. Nokia shall not be liable for any other losses or damages.
These remedies are the Consumer’s exclusive remedies for
breach of warranty.
5. Upon request from Nokia, the Consumer must prove the date
of the original purchase of the Product by a dated bill of sale or
dated itemized receipt.
6. The Consumer shall bear the cost of shipping the Product to
Nokia in Melbourne, Florida. Nokia shall bear the cost of shipping
the Product back to the Consumer after the completion of
service under this limited warranty.
7. The Consumer shall have no coverage or benefits under this
limited warranty if any of the following conditions are applicable:
a) The Product has been subject to abnormal use, abnormal
conditions, improper storage, exposure to moisture or dampness,
unauthorized modifications, unauthorized connections, un-
authorized repair, misuse, neglect, abuse, accident, alteration,
improper installation, or other acts which are not the fault of
Nokia, including damage caused by shipping.
86
b) The Product has been damaged from external causes such
as collision with an object, or from fire, flooding, sand, dirt,
windstorm, lightning, earthquake or damage from exposure to
weather conditions, an Act of God, or battery leakage, theft,
blown fuse, or improper use of any electrical source, or damage
caused by the connection to other products not recommended
for interconnection by Nokia.
c) Nokia was not advised by the Consumer in writing of the
alleged defect or malfunction of the Product within fourteen (14)
days after the expiration of the applicable limited warranty
period.
d) The Product serial number plate or the accessory data code
has been removed, defaced or altered.
e) The defect or damage was caused by the defective function
of the cellular system or by inadequate signal reception by the
external antenna.
8. If a problem develops during the limited warranty period, the
Consumer shall take the following step-by-step procedure:
a) The Consumer shall return the Product to the place of
purchase for repair or replacement processing.
b) If “a” is not convenient because of distance (more than 50
miles) or for other good cause, the Consumer shall ship the
Product prepaid and insured to:
Nokia Inc.
Attn: Repair Department
795 West Nasa Blvd.
Melbourne, FL. 32901
c) The Consumer shall include a return address, daytime phone
number and/or fax number, complete description of the
problem, proof of purchase and service agreement (if
applicable). Expenses related to removing the Product from an
installation are not covered under this limited warranty.
d) The Consumer will be billed for any parts or labor charges not
covered by this limited warranty. The Consumer will be
responsible for any expenses related to reinstallation of the
Product.
e) Nokia will repair or authorize the repair of the Product under
the limited warranty within 30 days after receipt of the Product
by Nokia or an Nokia authorized service center. If Nokia cannot
perform repair covered under this limited warranty within 30
days, or after a reasonable number of attempts to repair the
same defect, Nokia at its option, will provide a replacement
Product or refund the purchase price of the Product less a
reasonable amount for usage.
87
f) If the Product is returned to Nokia during the limited warranty
period, but the problem with the Product is not covered under
the terms and conditions of this limited warranty, the Consumer
will be notified and given an estimate of the charges the
Consumer must pay to have the Product repaired, with all
shipping charges billed to the Consumer. If the estimate is
refused, the Product will be returned freight collect. If the
Product is returned to Nokia after the expiration of the limited
warranty period, Nokia's normal service policies shall apply and
the Consumer will be responsible for all shipping charges.
9. The Product consists of newly assembled equipment that
may contain used components that have been reprocessed
to allow machine compliance with Product performance and
reliability specifications.
10. ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR
FITNESS FOR A PARTICULAR PURPOSE OR USE, SHALL
BE LIMITED TO THE DURATION OF THE FOREGOING LIMITED
WRITTENWARRANTY. OTHERWISE, THE FOREGOING LIMITED
WARRANTY IS THE CONSUMER'S SOLE AND EXCLUSIVE
REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED. NOKIA SHALL NOT BE LIABLE FOR
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES,
INCLUDING BUT NOT LIMITED TO, LOSS OF ANTICIPATED
BENEFITS OR PROFITS, LOSS OF SAVINGS OR REVENUE,
PUNITIVE DAMAGES, LOSS OF USE OF THE PRODUCT OR
ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST
OF ANY SUBSTITUTE EQUIPMENT OR FACILITIES, DOWN-
TIME, THE CLAIMS OF ANY THIRD PARTIES, INCLUDING
CUSTOMERS, AND INJURY TO PROPERTY, RESULTING
FROM THE PURCHASE OR USE OF THE PRODUCT OR
ARISING FROM BREACH OF THE WARRANTY, BREACH OF
CONTRACT, NEGLIGENCE, STRICT TORT, OR ANY OTHER
LEGAL OR EQUITABLE THEORY, EVEN IF NOKIA KNEW OF
THE LIKELIHOOD OF SUCH DAMAGES. NOKIA SHALL NOT
BE LIABLE FOR DELAY IN RENDERING SERVICE UNDER THE
LIMITED WARRANTY, OR LOSS OF USE DURING THE
PERIOD THAT THE PRODUCT IS BEING REPAIRED.
11. Some states do not allow limitation of how long an implied
warranty lasts, so the above one-year warranty limitation may
not apply to you (the Consumer). Some states do not allow the
exclusion or limitation of incidental and consequential damages,
so certain of the above limitations or exclusions may not apply
to you (the Consumer). This limited warranty gives the Consumer
specific legal rights and the Consumer may also have other
rights which vary from state to state.
88
12. Nokia neither assumes nor authorizes any authorized
service center or any other person or entity to assume for it any
other obligation or liability beyond that which is expressly
provided for in this limited warranty including the provider or
seller of any extended warranty or service agreement.
13. This is the entire warranty between Nokia and the
Consumer, and supersedes all prior and contemporaneous
agreements or understandings, oral or written, and all
communications relating to the Product, and no representation,
promise or condition not contained herein shall modify these
terms.
14. This limited warranty allocates the risk of failure of the
Product between the Consumer and Nokia. The allocation is
recognized by the Consumer and is reflected in the purchase
price of the Product.
15. Any action or lawsuit for breach of warranty must be
commenced within eighteen (18) months following delivery of
the Product.
16. Questions concerning this limited warranty may be directed
to:
Nokia Customer Care Center
Nokia Inc.
7725 Woodland Center Boulevard, Suite #150
Tampa, FL 33614
Telephone: 1-888-NOKIA2U (1-888-665-4228)
Facsimile: (813) 249-9619
TTY Users: 1-800-24NOKIA (1-800-246-6542)
17. The limited warranty period for Nokia supplied attachments
and accessories is specifically defined within their own warranty
cards and packaging.
©Nokia is a registered trademark of Nokia Corporation.
89
Call timers 17, 23
clearing 30
11. Index
A
current call timer 32
life timer 41
Call waiting
activating 25
answering an incoming
call 25
ABC mode 16
Access codes 16
Accessories 73
batteries 73
chargers 75
Caller groups 26
graphics 27
renaming 27
Alarm clock 16
Answering a call 8
Antenna 7
ringing tones 26
Caller ID 27
Automatic answer 17
Automatic redial 18
send own number 61
Calling card
making calls with 29
storing in phone 28
Calls
B
Batteries
attaching 3
available 73
charging 4
answering 8
answering automatically 17
answering with call
waiting 25
conference call 32
ending 8
charging times 74
discharging 5
removing 3
standby times 74
talk times 74
forwarding 22
initiating a second 32
making 8
muting 44
silencing incoming 58
swapping 25
unmuting 44
Care and maintenance 84
Chargers 75
Charging times 74
Clear call lists 30
Clock 31
displaying/hiding 32
setting 31
C
Calculator 18
currency converter 19
Calendar 19
Call forwarding 22
cancelling 22
options 22
Call log
clear call lists 30
dialed calls 33
missed calls 45
options in call lists 23
received calls list 54
Call restrictions see restrict
calls
time format 31
Conference call 32
90
Currency converter 19
Cursor 20
Customer care 33
K
Keyguard 9
Keypad tones 40
Keys
D
locking 9
Dialed calls list 33
power key 7
scroll key 11
soft keys 11
Dice game 39
Directory see phone book 49
E
L
Earpiece volume 34
Language 41
Editing names/numbers 50
Emergency calls 34, 82
Emergency key 9 feature 35
Entering letters and
Last number redial 41
Letter case 41
Letters, entering 35
Life timer 41
numbers 35
Lights
Erasing names/numbers 51
and Keyguard 10
in Car profile 42
Listen to voice messages 42
Lock code 42
Locking the keypad see
Keyguard
F
Factory settings, restoring 54
Forwarding calls see call
forwarding
Locking your phone 51
Logic game 38
G
Game tones 72
Games
M
Dice 39
Logic 38
Memory 38
Snake 38
Making a call 8
Memory game 38
Memory status 43
Menu
help 13
H
shortcuts, summary 14
shortcuts, using 13
Message alert tone 44
Message received 39
Message settings 65
Messages 43
Help text 13
I
Inbox 39, 64
In-call menu 39
Microphone 44
muting and unmuting 44
Missed calls list 45
91
N
R
NAM selection 45
Names
Received calls list 54
Redial
editing 50
automatic 18
erasing 51
last number 41
finding 50
storing 50
Network feature setting 46
Network services 47
Numbers
editing 50
entering 35
erasing 37
Residential systems see
system selection
Restore factory settings 54
Restrict calls 55
Ringing options 57
Ringing tones 58
Ringing volume 58
Roaming 59
finding 50
S
storing 62
Safety information 79
Scroll bar 11
Scroll key 11
O
On/off 7
One-touch dialing 47
Outbox 49
Scrolling view 60
Security code 60
Send own number 61
Shortcuts 13
Signal strength 7, 8
Snake game 38
P
Paging 63
Phone book 49
available memory 43
editing entries 50
erasing entries 51
finding entries 50
one-touch dialing
scrolling view 60
storing entries 50
Phone lock 51
unlocked phone number
69
Soft keys 11
Special characters 37
Speed dialing see one-
touch dialing
Standby times 74
Start screen 12
Storing a calling card 28
Storing names/numbers 50
System 63
System selection 63
Power key 7
private systems see system
selection
T
Talk times 74
Profiles 53
Technical data 85
Public systems see system
selection
92
Text messages
forwarding 66
inbox 39
message settings 65
reading 66
receiving 65
replying to 67
sending 64
V
Vibrating alert 69
Voice mailbox number,
storing 70
Voice messages 70
Voice privacy 71
Volume
earpiece 34
keypad tones 40
ringing 58
storage 67
writing 64
Tones
keypad 40
W
message alert tone 44
ringing options 57
ringing tones 58
ringing volume 58
warning and game 72
Touch tones 67
length 69
Warning and game tones 72
Warranty 86
Welcome note 72
Write new 72
manual 43
U
Unlocked phone number 69
Unlocking your phone
Keyguard feature 9
phone lock feature 52
Unmuting the microphone 44
93
Para obtener un manual del usuario en español favor de
llamar o enviar un fax al teléfono 1-888-NOKIA2U
(1-888-665-4228), fax 1-813-249-9619.
For alternate formats of this owner’s manual, call our
Customer Care center at 1-888-665-4228 (NOKIA2U).
94
|