Model iH5
The Home System
For Your iPod ®
Music
Photos
Extras
Settings
1
Table of Contents
A Consumer Guide to Product Safety ............................................................................................................................3-5
Safety Instructions
FCC Information
Getting Started ................................................................................................................................................................6-7
iPod® Inserts
Install AC Adaptor
Install AM loop antenna
Install/Replace Backup Battery
Controls and Indicators ...........................................................................................................................................8
Using the Optional Remote Control...........................................................................................................................................9
Clock Display ...........................................................................................................................................10
Setting Up the iH5 ...........................................................................................................................................................11-12
Setting Clock Time
Setting Alarm Time
Charging your iPod®..........................................................................................................................................12
Listening to your iPod®..........................................................................................................................................12-13
Listening to a non-docking iPod® or other portable audio devices....................................................................................13
Listening to Radio .................................................................................................................................................14
Alarm Operation ......................................................................................................................................................................14
Sleep Operation.........................................................................................................................................................15
Snooze/Dimmer Operation ...............................................................................................................................................15
Line Out Operation ...........................................................................................................................................................................15
Troubleshooting ........................................................................................................................................................... 16-19
Warranty Information ...........................................................................................................................................................20
2
A Consumer Guide to Product Safety
When used in the directed manner, this unit has been designed and manufactured to ensure your personal
safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and
operating instructions carefully before installation and use, and keep these instructions handy for future reference.
Take special note of all warnings listed in these instructions and on the unit.
1. Water and Moisture – The unit should not be used near water. For example: near a bathtub, washbowl,
kitchen sink, laundry tub, swimming pool or in a wet basement.
2. Ventilation – The unit should be situated so that its location or position does not interfere with its proper
ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may block
ventilation openings. Also, it should not be placed in a built-in installation, such as a bookcase or cabinet,
that may impede the flow of air through the ventilation openings.
3. Heat – The unit should be situated away from heat sources such as radiators, heat registers, stoves or other
appliances (including amplifiers) that produce heat.
4. Power Sources – The unit should be connected to a power supply only of the type described in the
operating instructions or as marked on the appliance.
5. Power-Cord Protection – Power supply cords should be routed so that they are not likely to be walked
on or pinched by items placed upon or against them. It is always best to have a clear area from where the
cord exits the unit to where it is plugged into an AC outlet.
6. Cleaning – The unit should be cleaned only as recommended. See the Maintenance section of this manual
for cleaning instructions.
3
A Consumer Guide to Product Safety
7. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled
into any openings or vents located on the product.
8. Attachments – Do not use attachments not recommended by the product manufacturer.
9. Lightning and Power Surge Protection – Unplug the unit from the wall outlet and disconnect the
antenna or cable system during a lightning storm or when it is left unattended and unused for long
periods of time. This will prevent damage to the product due to lightning and power-line surges.
10. Overloading – Do not overload wall outlets, extension cords, or integral convenience receptacles as this
can result in a risk of fire or electric shock.
11. Damage Requiring Service – The unit should be serviced by qualified service personnel when:
A. the power supply cord or plug has been damaged.
B. objects have fallen into or liquid has been spilled into the enclosure.
C. the unit has been exposed to rain.
D. the unit has been dropped or the enclosure damaged.
E. the unit exhibits a marked change in performance or does not operate normally.
12. Antenna – Do not connect an external antenna to the unit (other than that provided).
13. Periods of Nonuse – If the unit is to be left unused for an extended period of time, such as a month or
longer, the power cord should be unplugged from the unit to prevent damage or corrosion.
14. Servicing – The user should not attempt to service the unit beyond those methods described in the user’s
operating instructions. Service methods not covered in the operating instructions should be referred to
qualified service personnel.
For operating instructions: 1-877-ihome01(1-877-446-6301) Toll Free
For any other questions: 1-800-288-2792 Toll Free
4
A Consumer Guide to Product Safety
FCC Information
This device complies with part 15 of the FCC Rules. Operation is subject to the
condition that this device does not cause harmful interference.
This equipment complies with the limits for a Class B digital device as specified in Part 15 of FCC Rules. These
limits provide reasonable protection against radio and TV interference in a residential area.
However, your equipment might cause TV or radio interference even when it is operating properly. To eliminate
interference you can try one or more of the following corrective measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the distance between the equipment and the radio or TV.
Use outlets on different electrical circuits for the equipment and the radio or TV.
Consult your dealer or an experienced radio/television technician if the problem still exists.
Modifying or tampering with your system’s internal components can cause a malfunction and might invalidate
the system’s warranty and void your FCC authorization to operate it.
For operating instructions: 1-877-ihome01(1-877-446-6301) Toll Free
For any other questions: 1-800-288-2792 Toll Free
5
Getting Started
Thank you for purchasing the iHome iH5 Stereo Home System for your iPod®. Designed specifically to work with
your docking iPod®, this system provides high quality audio and radio performance that brings out the best in
your music.
Please read this instruction book carefully before operating the iH5, and keep it for future reference.
iPod® Inserts
Your iH5 comes with removable inserts* to ensure your iPod® fits properly in the dock on the top of the system.
* Due to new iPod models, new inserts subject to availability.
Shuffle Insert
Mini Insert
Thin iPods Insert
Thick iPods Insert
Nano Insert
iPod 3Gen
iPod 3Gen
iPod 4Gen
iPod Photo
10-15 GB iPod 3Gen
30 GB iPod Nano
2 GB
4 GB
use with iPod Shuffle Use with iPod Mini
NOTE: iH5 will NOT
charge iPod Shuffle
20 GB iPod 3Gen
20 GB iPod 4Gen
30 GB iPod Photo
iPod Photo
40 GB iPod Nano
40 GB
40 GB
60 GB
Music
Photos
Extras
To place an insert:
Settings
1. Select the insert for your iPod® (see chart above). Using the
correct insert ensures the proper fit for your iPod®.
2. Gently press the iPod® insert into the dock.
3. Carefully place your iPod® into the dock. (The iPod® must
not be in a case or “skin”).
4. To remove/replace an insert, first remove your iPod®, then
grip the insert and pull gently upwards.
AM loop antenna
Install AM loop antenna
Snap the AM loop antenna into the base provided. Next, plug
the AM loop antenna into the connector located on the back of
the unit for AM band radio operation. For best reception, please
move the AM antenna 12” away from the unit and iPod®.
Install AC Adaptor
Connect the of AC adaptor cable plug into the jack on the back
of the system, then plug the AC adaptor into the wall outlet.
DST
DC 15V 1100mA
line in
time zone
clock adj.
-1
+1
line out
Base
6
Getting Started
Install/Replace Backup Battery
The iH5 uses a backup battery system to provide continuous alarm operation and clock settings in the event of a power
failure. If the Backup Battery has been installed and a power failure occurs or the AC cord is accidentally disconnected,
the display will not remain lit, but the current time and alarm time settings will be temporarily maintained. Otherwise, you
must reset the time and alarm settings.
Two backup batteries are already installed prior to shipping to keep the clock running. If the unit has no display or the
Battery Low Icon located on the left of the display is flashing, it is time to replace the backup batteries.
1. Please make sure the AC adaptor is connected. Otherwise all settings may be lost
during battery replacement.
2. Open the battery compartment cover located on the bottom of the unit.
3. Insert 2 “AA” batteries, checking that the polarity ( + and – ends of the batteries) matches
the drawing inside the battery compartment. We recommend the use of alkaline batteries
for longer life. Different types of batteries or new and used batteries are not to be mixed.
4. Close the compartment cover.
Batteries information:
•
•
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon -zinc) or rechargeable (nickel-cadmium) batteries.
Maintenance
Place the unit on a level surface away from sources of direct sunlight or excessive heat.
Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material
should be placed between it and the furniture.
Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as Benzine,
thinner or similar materials can damage the surface of the unit.
7
Controls and Indicators
ꢁ AM/FM Select Button
Radio Button ᕧ
Volume Wheel ᕦ
iPod Button ᕥ
ꢀ Dock
µ Sleep Button
¸ Settings Wheel
¹ Alarm Reset/Power Off Button
Alarm On/Off Button ᕤ
Alarm Set Button ᕣ
Wake-To Button ᕢ
Snooze/Dimmer Button ³
Time Zone Button ƻ
ꢂ Clock Adjust Button
Line Out Jack ƺ
ƽ DST Switch
ƾ Line in Jack
AC Adaptor Jack ƹ
DC 15V 1100m A
DST
ƿ Speaker Port
line out
timezone
clockadj.
am antenna
line in
+
-1
1
AM Loop Antenna socket Ƹ
FM Antenna
8
Using The Optional Remote Control Unit
NOTE: The Remote Control is an optional accessory. You can purchase the Remote Control unit
•online: www.ihomeaudio.com
•by phone (toll free): 800-288-2792
Install/Replace the Remote Control Battery
The remote control battery is already installed at the factory. When the remote control stops
operating or its range seems reduced, replace the battery with a new one.
1. The battery door is located on the back end of the unit.
2. Squeeze notched tab A while pulling battery door latch B to release the battery door
Battery
door
latch
A
latch and take out the battery holder.
3. Insert a “CR2032” 3-volt lithium battery. Make sure the polarity (the + and – side of the
battery) is correct.
4. Replace the battery holder back in the remote control.
B
NOTE: PLEASE DISCARD BATTERIES PROPERLY
The optional Remote Control controls basic functions on the iH5 and certain iPod® functions when the iPod® is docked in
the iH5. For beslt results, aim remote control towards the grill by the lower right corner of the display.
Power On/Off Button
Turns iH5 ON or OFF or reset alarm when alarm is sounding
iPod Play/Pause Button Selects iPod and plays track. In play mode, press to pause
Skip to previous or next track when iPod is playing, or
HOLD to scan current playing track. In radio mode, press
to tune statitions. HOLD to scan radio stations.
Button
Button
Raises volume level
Volume+ Button
_
Lowers volume level
Volume Button
AM/FM Select Button
Radio Button
Selects AM or FM radio band
Selects Radio function
Snooze/Dimmer Button
Snooze mode when alarm sounds, otherwise dims display
9
Clock Display
Battery Low Indicator
Time/Alarm Display
PM Indicator
Sleep Display
Alarm Armed
Wake To Indicator:
iPod, Radio, Buzzer,
iPod Indicator
Radio Frequency
AM/FM Indicator
Daylight Savings Time
10
Setting Up the iH5
Your iH5 Home System comes from the factory preset to Eastern Standard Time. Just follow these simple steps
to match the setting to where you live.
1. Depending on your location and whether or not DST (Daylight Savings Time) is in effect, set the ƽ DST
Switch located on the back of the unit to +1 or -1 to activate the DST adjustment feature. Activating the +1
switch will advance the time one hour.
2. Press and hold the ꢀ Time Zone Button located on the back of the unit for approx. 2 seconds until the
Time Zone Indicator at the lower right hand side of the display shows current time zone. Turn the ꢁ Setting
Knob to select the time zone.
ATL - Atlantic
EAS - Eastern
CEN - Central
MTN - Mountain
PAC - Pacific
ALS - Alaska
HAI - Hawaii
3. Press the ꢀ Time Zone Button again to exit the setting mode. You should hear 2 beeps indicating the
time zone has been set.
4. If for any reason the time showing is not correct, please see Setting Clock Time and Calendar to set the
clock.
Setting Clock Time and Calendar
1. Press and hold the ꢂ Clock Adj Button located on the back of the unit for 2 seconds until the display
flashes. Turn the ꢁ Setting Knob until the current time is displayed. Remember to set the correct AM or
PM (an icon to the right of the time display is the PM indicator; there is no AM indicator).
2. Press the ꢂ Clock Adj Button again to confirm clock setting. You should hear 1 beep indicating the clock
time is set.
3. The year display at the lower right will flash. Press the ꢂ Clock Adj Button to accept the current setting,
or turn the ꢁ Setting Knob until current year is displayed. Press the ꢂ Clock Adj Button to confirm year
setting. You should hear 1 beep indicating the year is set.
4. The date display at the lower right will flash. Press the ꢂ Clock Adj Button to accept the current setting,
or turn the the ꢁ Setting Knob until current date is displayed. Press the ꢂ Clock Adj Button to confirm
date setting. You should hear 2 beeps indicating the date is set and will exit Clock and Calendar setting mode.
11
Setting Up the iH5
Setting Alarm Time
1. Press and hold the ꢀ Alarm Set Button for 2 seconds until the display flashes. Turn the ꢁ Setting Knob
until the desired alarm time is displayed. Remember to set the correct AM or PM (an icon to the right of the
time display is the PM indicator; there is no AM indicator).
2. Press the ꢂ Wake-To Button to select the iPod®, radio or alarm buzzer to wake to. A corresponding Wake
Icon will light up for the selected Wake-To sound.
3. Press the ꢀ Alarm Set Button again to exit the setting mode. You should hear 2 beeps indicating the alarm
time and wake to mode are set.
Note: Once you set the alarm time, the alarm will be automatically armed. The Alarm Icon and Wake Icon will
appear to indicate the alarm is armed.
®
Charging your iPod
Note: Please make sure you are using the correct insert for your iPod® (see chart on page 6) and that it is
properly docked into the iH5. Failure to do so may damage your iPod®.
1. While your iPod® is docked in the system, it recharges (until fully charged). Note that iPod® Shuffles and
other non-docking iPod®s will NOT charge.
®
Listening to your iPod
1. Dock the already playing iPod® .The iH 5 will autmoatically turn on and you
will hear the music playing from your iPod® .
Note: If the playing song/music loudness is too low, iH5 may not detect iPod®
is in play mode. Press the ꢃ iPod Button on the iH5 (or
Play/Pause
Button on the remote control) twice to play it.
2. When the iPod® is docked and in standby mode, press the ꢃ iPod Button
on the iH5 (or
Play/Pause Button on the remote control) to play it. The
iPod Icon will appear on the iH5 LCD display, showing iPod® Playing
mode.
3. Press the ꢃ iPod Button again to pause play; press again to resume play.
12
®
Listening to your iPod
4. Turn the ꢀ Volume Knob on the iH5 (or
Volume+ and
Volume – Button on the remote control) to
adjust the system volume.
5. Press
or
Button on remote control to go to the next or previous track. Press and hold while
track is playing for high speed forward or reverse music search of the current track.
6. To turn off the unit, press the ꢁ Alarm Reset/Power Off Button or
Power On/Off Button on remote
control to turn it off. The iPod® will continue charging while in the dock.
®
Listening to a non-docking iPod or other portable audio devices
If you are using an iPod® without a docking port or other MP3 player or other portable audio device, you can
still play it through the iH5 via the Line-in Jack.
NOTE: To use the Line in Jack, make sure no iPod® is docked in the iH5.
iPod® shuffle
1. Plug one end of the audio patchcord (included) into the headphone or
line-out jack on your device and the other end of the patchcord into the
iH5 ꢂ Line-in Jack, located on the back of the unit.
2. Press the ꢃ iPod Button on the iH5 (or
Play/Pause Button on the
remote control). The AU Icon will appear, indicating AUX playing mode.
3. Turn on and play your device.
4. Use the ꢀ Volume Wheel on the iH5 (or Volume+ and
Volume–
Button on the remote control) to adjust the system volume. You may
need to adjust your device volume, too.
5. To turn off the unit, press the ꢁ Alarm Reset/Power Off Button (or
Power On/Off Button on the remote control). Please remember to
turn off your device, too.
CD player
13
Listening to Radio
Note: Extend FM wire antenna fully for best FM reception (do not strip, alter or attach to other antennas). The
AM loop antenna should be placed up to 12” away from the unit for best reception. Rotate the AM loop antenna
as required for best AM reception.
1. Press the ꢀ Radio Button on the iH5 (or the remote control) to play the radio. The radio frequency appears
at the lower right corner of the display.
2. Press the ꢁ AM/FM Button on the iH5 (or the remote control) to select AM or FM band.
3. Turn the ꢂ Setting Knob on the iH5 (or
or
Button on the remote control) to tune in the desired
station. Press the
or
Button on the remote control again to Auto scan to the next clear station.
Hold for seek mode.
4. Turn the ꢃ Volume Knob on the iH5 (or
Volume+ and
Volume– Button on the remote control) to
adjust the system volume.
5. To turn off the unit, press the ꢄ Alarm Reset/Power Off Button (or
Power On/Off Button on the
remote control) to turn it off.
Alarm Operation
The iH5 Home System features “Sure Alarm”. If a power failure occurs or the AC cord is accidentally disconnected,
the unit will change to Buzzer alarm to wake you up (provided you have installed back up batteries).
This unit features Gentle Waking, which gradually increases the alarm volume (except on the buzzer alarm).
NOTE: TO WAKE TO iPOD®, YOUR iPOD® MUST BE PROPERLY DOCKED AND OFF (NOT IN PLAY
MODE) OR NO ALARM WILL SOUND.
1. Set the alarm time per Setting Alarm time. To preview the alarm time, just press the ꢅ Alarm Set Button once.
2. You can change the sound mode you wish to wake to at any time by pressing the ꢆ Wake-To Button.
3. Press the ꢇ Alarm On/Off Button to arm or disarm the alarm.
4. When the alarm is sounding, press the ꢄ Power Off/Alarm Reset Button on the iH5 (or
Power On/Off
Button on the remote control) to turn the alarm OFF. The alarm will come on again the next day at the
same time.
5. To stop the alarm from coming on the following day, press the ꢇ Alarm On/Off Button to turn it OFF. The
Alarm Icon and Wake Icon will disappear to indicate the alarm is disarmed.
6. If the alarm is not turned off after it sounds it will play for approximately 1 hour then turn off automatically.
This cycle will repeat every 24 hours unless the controls are changed.
Note: When you select Wake To iPod®, please make sure your iPod® has enough songs to play for 1 hour,
otherwise please set the iPod® repeat mode to ON.
Note: If you select Wake To iPod® but no iPod® is present or there is no music on the iPod® at alarm time, the
iH5 will automatically switch to buzzer alarm.
14
Sleep Operation
1. When the iH5 is off or while listening to your iPod® or the radio, press the ꢀ Sleep Button to enter sleep
mode. The unit will automatically turn off after the selected time. Sleep mode has a Gentle Sleep feature which
gradually lowers the volume.
2. You can adjust the sleep timer from 120, 90, 60, 30 or 15 minutes by pressing the ꢀ Sleep Button again.
Pressing the ꢀ Sleep Button while sleep is set to 15 minutes will turn off the unit.
3. When the display changes back to show the real time, pressing the ꢀ Sleep Button once will show the
sleep time remaining. Pressing it again will change sleep time to the next lowest increment.
4. iH5 has independent volume setting for sleep mode so you can adjust the sleeping volume without affecting
the alarm volume. Turn the ꢁ Volume Wheel (or press
Volume+ and
Volume– Button on the remote
control) to adjust sleep volume.The sleep volume will remain at that level the next time the you enter sleep
mode until controls are changed.
5. To stop listening at any time, press the ꢂ Alarm Reset/Power Off Button (or
Power On/Off Button
on the remote control).
Snooze/Dimmer Operation
1. Press the ꢃ Snooze/Dimmer Button on the iH5 (or the remote control) after the alarm sounds. The alarm
will go off and will come on again in approx. 9 minutes. You may repeat this cycle several times during the 1
hour alarm cycle.
2. During normal operation, press the ꢃ Snooze/Dimmer Button to control the brightness of the LCD display.
Line Out Operation
You can connect the iH5 to another line-level device such as an amplifier or recording device through the ꢄ Line
Out Jack located at the back of the unit. The volume setting on the iH5 does not affect the line level. Adjust
volume level using the volume control on the device you connnect to.
15
Troubleshooting
Symptom
Possible Problem
Solution
Unit doesn’t respond
(no power)
AC adaptor isn’t plugged into a wall outlet
or the connector is not plugged into the
power supply jack on the back of the unit
Plug the AC adaptor into a wall outlet and plug the connector
into the supply jack on the unit
Wall outlet is not functioning.
Plug another device into the same outlet to confirm the outlet
is working
iPod does not dock
properly
Using no or wrong iPod insert
iPod didn’t install properly
Make sure the dock insert is the proper fit for your iPod
Remove your iPod from the dock and check for obstruction
on the connectors in the dock and on your iPod. Then reseat
it in the dock.
Battery Low icon
always flashing
Batteries are weak
Replace with new batteries
Batteries were not installed properly
Check to make sure the polarity ( + and – ends) matches
the diagram in the battery compartment
iPod does not
respond to the unit
iPod is not installed properly
Your iPod software is too old
iPod is locked up
Remove your iPod from the dock and check for obstruction
on the connectors in the dock and on your iPod. Then reseat
it in the dock.
Upgrade software on your iPod. For details visit
Please make sure your iPod is working properly before
docking into the unit. Please refer to your iPod manual for
details.
Using 1st or 2nd generation iPod, iPod
Shuffle or other devices.
iH5 cannot control those iPods or other devices.
16
Troubleshooting
Symptom
Possible Problem
Solution
iPod didn’t charge up
iPod is not installed properly
Remove your iPod from the dock and check for obstruction
on the connectors in the dock and on your iPod. Then reseat
it in the dock.
iPod is locked up/ frozen
iPod battery has problem
Please make sure your iPod is working properly before
docking into the unit. Please refer to your iPod manual for
details.
No AM band radio
sound but others OK
AM loop antenna is not connected to the
unit
Plug the AM loop antenna connector to the jack on the back
of the unit
AM band radio is very
noisy
AM loop antenna isn’t located properly
Move the AM loop antenna away from the main unit and
rotate it for best reception
Sound is distorted
Volume level is set too high
Sound source is distorted
Decrease the volume
If the iPod original sound source (MP3) is of poor quality,
distortion and noise are easily noticed with high-power
speakers. Try a different audio source such as a music CD.
If you are using an external sound source like older generation
of iPod or iPod Shuffle, try reducing the output volume on
the device itself. Also try turning bass boost OFF.
Remote Control didn’t
work
Battery weak
Replace current battery with new battery
Remote Control is not pointed toward to
the iH5
Point the Remote Control toward the iH5, move within 10
feet of the unit.
Unit gets warm after
extended play at high
volume
This is normal
Turn unit off for awhile or lower volume
Can’t hear speakers
attached to line out jack
The signal from the line out jack needs amplification. Use
powered speakers/monitors or other amplified audio device.
Speakers lack power source
17
Solucionando problemas
Síntoma
Causa
Solución
La unidad no
funciona (no circula
corriente eléctrica)
El adaptador de AC no está conectado al
Conecte el adaptador de AC al tomacorriente y también
tomacorriente o el conector no está conectado conecte el conector a la ficha en la parte posterior de la unidad
a la ficha en la parte posterior de la unidad
El tomacorriente no funciona
Coloque otro aparato en ese mismo tomacorriente para
confirmar si el que no funciona es el tomacorriente
El iPod no encastra
correctamente
No ha colocado el encastre del iPod, o está Verifique que el encastre sea el apropiado para su iPod
utilizando el encastre incorrecto.
El iPod no encastra correctamente
Quite el iPod del encastre y retire la posible obstrucción del
encastre o de su iPod. Vuelva a colocar el iPod dentro del
encastre.
El ícono de batería
baja está destellando
Las baterías están gastadas
Reemplace las baterías
Las baterías no están instaladas
correctamente
Verifique que la polaridad de las baterías (- y +) se encuentren
de acuerdo al diagrama del compartimiento de baterías.
El iPod no se
comunica con la
unidad
El iPod no está instalado correctamente
Quite el iPod del encastre y verifique posibles obstrucciones
del encastre o de su iPod. Vuelva a colocar el iPod dentro
del encastre.
Su software es obsoleto
Renueve su software. Para mayor información, diríjase a
El iPod no responde
Verifique que su iPod funcione correctamente antes de
conectarlo a la unidad. Refiérase al manual de su iPod para
más detalles.
Usted tiene un iPod de primera o segunda
generación, un Shuffle u otro tipo de aparato
El iH5 no puede controlar estos otros aparatos
18
Solucionando problemas
Síntoma
Causa
Solución
El iPod no carga
El iPod no está instalado correctamente
Quite el iPod del encastre y retire la posible obstrucción del
encastre o de su iPod. Vuelva a colocar el iPod dentro del
encastre.
El iPod está trabado/no responde
Por favor asegúrese de que su iPod funcione correctamente
antes de colocarlo en el encastre. Refiérase al manual de
su iPod para mayor información.
La batería del iPod podría tener algún
inconveniente
La banda de AM no
La antena no está ubicada correctamente
Aleje la antena de la unidad y gírela para mejorar la recepción
Baje el volumen
suena pero las demás sí
El sonido sale
distorsionado
El volumen se encuentra muy alto
El sonido sale distorsionado de la unidad
Si el sonido original de su iPod era de pobre calidad, las
distorsiones y ruidos se harán más notables con los
parlantes de alta potencia. Pruebe utilizar otra fuente de
audio como un CD.
Si está utilizando un iPod de primeras generaciones o un
Shuffle, intente bajar el volumen de su aparato. También
intente apagar el amplificador de bajos
El control remoto no
funciona
Las baterías están gastadas
Reemplace las baterías por nuevas
No está apuntando el control remoto
hacia el iH5
Apunte el control remoto hacia el iH5 y manténgase a una
distancia máxima de 10 pies de la unidad.
La unidad recalienta
luego de largos
períodos de uso a alto
volumen
Esto es normal
Apague la unidad o baje el volumen
19
Limited 90-Day Warranty Information
iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from
defects in workmanship and materials, under normal use and conditions, for a period of 90 days from the date of original purchase.
Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.
Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period,
SDI Technologies will repair or, at its discretion, replace this product without charge (except for a $10.00 charge for handling, packing,
return UPS/postage, and insurance). This decision is subject to verification of the defect or malfunction upon delivery of this product
to the Factory Service Center listed below. The product must include proof of purchase, including date of purchase. The fee for service
without proof of purchase is $30.00.
Before returning this product for service, please first replace the batteries (if applicable) with fresh ones, as exhausted or defective
batteries are the most common cause of problems encountered.
If service is still required:
1. Remove the batteries (if applicable) and pack the unit in a well padded, heavy corrugated box.
2. Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date of purchase, if within the warranty
period.
3. Enclose a check or money order payable to the order of SDI Technologies, for the sum of $10.00 ($30.00 without proof of purchase).
4. Send the unit prepaid and insured, to the Factory Service Center listed below.
Consumer Repair Department
SDI Technologies Inc.
1330 Goodyear Dr.
El Paso, TX 79936-6420
Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which
have been damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired by unauthorized
persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CD’s or tape
cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner.
This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original
purchaser. In no event will SDI Technologies or any of its affiliates, contractors, resellers, their officers, directors, shareholders, members
or agents be liable to you or any third party for any consequential or incidental damages, any lost profits, actual, exemplary or punitive
damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions
may not apply to you.) This warranty gives you specific legal rights, and you may also have other rights which vary from state to
state.
Your acknowledgement and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually
binding to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your SDI Technologies
product.
For operating instructions: 1-877-ihome01(1-877-446-6301) Toll Free
For any other questions: 1-800-288-2792 Toll Free
IH5IBV2-063005
Printed in China
|