Nokia 6111 User Manual

Nokia 6111 User Guide

EN 9241565

Issue 2

Bluetooth is a registered trademark of Bluetooth SIG, Inc.

Nokia operates a policy of continuous development. Nokia reserves the right to make changes and

improvements to any of the products described in this document without prior notice.

This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and

noncommercial use in connection with information which has been encoded in compliance with the

MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use

in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be

implied for any other use. Additional information, including that related to promotional, internal, and

commercial uses, may be obtained from MPEG LA, LLC. See <http://www.mpegla.com>.

This Nokia device complies with Directive 2002/95/EC on the restriction of the use of certain hazardous

substances in electrical and electronic equipment.

Under no circumstances shall Nokia be responsible for any loss of data or income or any special,

incidental, consequential or indirect damages howsoever caused.

The contents of this document are provided "as is". Except as required by applicable law, no warranties of

any kind, either express or implied, including, but not limited to, the implied warranties of

merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or

contents of this document. Nokia reserves the right to revise this document or withdraw it at any time

without prior notice.

The availability of particular products may vary by region. Please check with the Nokia dealer nearest to

you.

This device may contain commodities, technology or software subject to export laws and regulations from

the US and other countries. Diversion contrary to law is prohibited.

EN 9241565/Issue 2

Contents

For your safety ..................................................................................................... 9

General information.......................................................................................... 13

Overview of functions............................................................................................................................. 13

Access codes.............................................................................................................................................. 14

Configuration settings service.............................................................................................................. 15

Download content and applications................................................................................................... 16

Nokia support on the Web..................................................................................................................... 16

1.Get started..................................................................................................... 17

Open the slide phone............................................................................................................................... 17

Install SIM card and battery.................................................................................................................. 17

Charge the battery................................................................................................................................... 20

Switch the phone on and off................................................................................................................ 21

Antenna....................................................................................................................................................... 22

Wrist strap.................................................................................................................................................. 22

2.Your phone..................................................................................................... 23

Keys and parts........................................................................................................................................... 23

Standby mode............................................................................................................................................ 25

Keypad lock (keyguard)........................................................................................................................... 29

3.Call functions ................................................................................................ 30

Make a call................................................................................................................................................. 30

Answer or reject a call............................................................................................................................ 31

Options during a call............................................................................................................................... 32

4.Write text....................................................................................................... 33

Settings ....................................................................................................................................................... 33

Predictive text input................................................................................................................................ 33

Traditional text input .............................................................................................................................. 34

5.Navigate the menus ...................................................................................... 35

6.Messaging ...................................................................................................... 36

Text messages (SMS)............................................................................................................................... 36

Multimedia messages (MMS)................................................................................................................ 38

Flash messages.......................................................................................................................................... 41

Nokia Xpress audio messaging............................................................................................................. 42

Memory full................................................................................................................................................ 43

Folders.......................................................................................................................................................... 43

E-mail application.................................................................................................................................... 44

Instant messaging (IM)........................................................................................................................... 46

Voice messages......................................................................................................................................... 52

Info messages............................................................................................................................................ 53

Service commands.................................................................................................................................... 53

Delete messages........................................................................................................................................ 53

Message settings...................................................................................................................................... 53

7.Contacts ......................................................................................................... 58

Search for a contact................................................................................................................................ 58

Save names and phone numbers ......................................................................................................... 58

Save details................................................................................................................................................ 58

Copy contacts............................................................................................................................................ 59

Edit contact details.................................................................................................................................. 60

Delete contacts or contact details ...................................................................................................... 60

Business cards........................................................................................................................................... 60

My presence............................................................................................................................................... 61

Subscribed names..................................................................................................................................... 62

Settings ....................................................................................................................................................... 64

Groups.......................................................................................................................................................... 64

Voice dialing .............................................................................................................................................. 64

Speed dials.................................................................................................................................................. 66

Info, service, and my numbers.............................................................................................................. 67

8.Log.................................................................................................................. 68

Recent calls lists....................................................................................................................................... 68

Counters and timers ................................................................................................................................ 68

Positioning information.......................................................................................................................... 69

9. Settings......................................................................................................... 70

Profiles......................................................................................................................................................... 70

Themes......................................................................................................................................................... 71

Tones............................................................................................................................................................ 71

Display......................................................................................................................................................... 72

Time and date............................................................................................................................................ 73

My shortcuts.............................................................................................................................................. 73

Connectivity............................................................................................................................................... 75

Call................................................................................................................................................................ 82

Phone........................................................................................................................................................... 83

Enhancements........................................................................................................................................... 84

Configuration............................................................................................................................................. 85

Security........................................................................................................................................................ 86

Restore factory settings.......................................................................................................................... 87

10.Operator menu............................................................................................. 88

11.Gallery........................................................................................................... 89

12.Media............................................................................................................ 90

Camera......................................................................................................................................................... 90

Media player.............................................................................................................................................. 93

Music player............................................................................................................................................... 94

Radio............................................................................................................................................................ 96

Recorder...................................................................................................................................................... 99

Equalizer................................................................................................................................................... 100

13.Push to talk................................................................................................ 101

Push to talk channels........................................................................................................................... 101

Switch PTT on and off.......................................................................................................................... 103

Make and receive a PTT call ............................................................................................................... 103

Callback requests................................................................................................................................... 106

Add a one-to-one contact.................................................................................................................. 107

PTT settings............................................................................................................................................. 107

Configuration settings......................................................................................................................... 108

Web ........................................................................................................................................................... 109

14.Organizer .................................................................................................... 110

Alarm clock.............................................................................................................................................. 110

Calendar................................................................................................................................................... 111

To-do list.................................................................................................................................................. 112

Notes......................................................................................................................................................... 112

Calculator ................................................................................................................................................ 113

Countdown timer................................................................................................................................... 114

Stopwatch................................................................................................................................................ 114

15.Applications................................................................................................ 116

Games....................................................................................................................................................... 116

Collection................................................................................................................................................. 117

16.Web............................................................................................................. 119

Set up browsing..................................................................................................................................... 119

Connect to a service............................................................................................................................. 119

Browse pages.......................................................................................................................................... 120

Appearance settings............................................................................................................................. 121

Cookies ..................................................................................................................................................... 122

Scripts over secure connection.......................................................................................................... 123

Bookmarks............................................................................................................................................... 123

Download files........................................................................................................................................ 124

Service inbox........................................................................................................................................... 124

Cache memory........................................................................................................................................ 125

Browser security .................................................................................................................................... 126

17.SIM services................................................................................................ 129

18.PC connectivity .......................................................................................... 130

PC Suite.................................................................................................................................................... 130

Packet data, HSCSD, and CSD............................................................................................................ 130

Data communication applications.................................................................................................... 131

19.Battery information................................................................................... 132

Charging and discharging................................................................................................................... 132

Nokia battery authentication guidelines........................................................................................ 133

Care and maintenance.................................................................................... 136

Additional safety information........................................................................ 138

Index................................................................................................................. 143

For your safety

Read these simple guidelines. Not following them may be dangerous or illegal. Read the

complete user guide for further information.

SWITCH ON SAFELY

Do not switch the phone on when wireless phone use is prohibited or when it

may cause interference or danger.

ROAD SAFETY COMES FIRST

Obey all local laws. Always keep your hands free to operate the vehicle while

driving. Your first consideration while driving should be road safety.

INTERFERENCE

All wireless phones may be susceptible to interference, which could affect

performance.

SWITCH OFF IN HOSPITALS

Follow any restrictions. Switch the phone off near medical equipment.

SWITCH OFF IN AIRCRAFT

Follow any restrictions. Wireless devices can cause interference in aircraft.

SWITCH OFF WHEN REFUELING

Do not use the phone at a refueling point. Do not use near fuel or chemicals.

SWITCH OFF NEAR BLASTING

Follow any restrictions. Do not use the phone where blasting is in progress.

USE SENSIBLY

Use only in the normal position as explained in the product documentation. Do

not touch the antenna unnecessarily.

QUALIFIED SERVICE

Only qualified personnel may install or repair this product.

ENHANCEMENTS AND BATTERIES

Use only approved enhancements and batteries. Do not connect incompatible

products.

WATER-RESISTANCE

Your phone is not water-resistant. Keep it dry.

BACK-UP COPIES

Remember to make back-up copies or keep a written record of all important

information stored in your phone.

CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user guide for detailed safety

instructions. Do not connect incompatible products.

EMERGENCY CALLS

Ensure the phone is switched on and in service. Press the end key as many times

as needed to clear the display and return to the start screen. Enter the

emergency number, then press the call key. Give your location. Do not end the

call until given permission to do so.

■ About your device

The wireless device described in this guide is approved for use on the EGSM 900 and GSM

1800 and 1900 networks. Contact your service provider for more information about

networks.

When using the features in this device, obey all laws and respect the privacy and legitimate

rights of others.

Warning: To use any features in this device, other than the alarm clock, the device

must be switched on. Do not switch the device on when wireless device use may

cause interference or danger.

■ Network services

To use the phone you must have service from a wireless service provider. Many of the

features in this device depend on features in the wireless network to function. These

network services may not be available on all networks or you may have to make specific

arrangements with your service provider before you can utilize network services. Your

service provider may need to give you additional instructions for their use and explain what

charges will apply. Some networks may have limitations that affect how you can use

network services. For instance, some networks may not support all language-dependent

characters and services.

Your service provider may have requested that certain features be disabled or not activated

in your device. If so, they will not appear on your device menu. Your device may also have

been specially configured. This configuration may include changes in menu names, menu

order, and icons. Contact your service provider for more information.

This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some

features of this device, such as text messages, multimedia messages, audio messages,

instant messaging service, e-mail, presence enhanced contacts, mobile Internet services,

content and application download, and synchronization with a remote Internet server,

require network support for these technologies.

■ Shared memory

The phone has two memories. The following features may share the first memory: contacts,

text messages, multimedia messages (but no attachments), instant messaging, groups, voice

tags, calendar, and to-do notes. The second shared memory is used by files stored in Gallery,

attachments of multimedia messages, e-mail, and Java^TMapplications. Use of one or more of

these features may reduce the memory available for the remaining features sharing

memory. For example, saving many Java applications may use all of the available memory.

Your device may display a message that the memory is full when you try to use a shared

memory feature. In this case, delete some of the information or entries stored in the shared

memory features before continuing. Some of the features, such as text messages, may have

a certain amount of memory specially allotted to them in addition to the memory shared

with other features.

■ Enhancements

A few practical rules about accessories and enhancements.

•

Keep all accessories and enhancements out of the reach of small children.

When you disconnect the power cord of any accessory or enhancement, grasp and pull

the plug, not the cord.

•

Check regularly that enhancements installed in a vehicle are mounted and are operating

properly.

Installation of any complex car enhancements must be made by qualified personnel only.

General information

■ Overview of functions

Your phone provides many functions that are practical for daily use, such as a

calendar, a clock, an alarm clock, a radio, and a built-in camera. Your phone also

supports the following functions:

• Enhanced data rates for GSM evolution (EDGE). See Packet data p. 78

• Extensible hypertext markup language (XHTML). See Web p. 119

• Audio messaging. See Nokia Xpress audio messaging p. 42

• Instant messaging. See Instant messaging (IM) p. 46

• E-mail application. See E-mail application p. 44

• Voice commands. See Voice dialing p. 64 and Voice commands p. 74.

• Push to talk. See Push to talk p. 101

• Presence-enhanced contacts. See My presence p. 61

• Java 2 Platform, Micro Edition (J2ME^TM). See Applications p. 116

• Bluetooth technology. See Bluetooth wireless connection p. 76.

■ Access codes

Security code

The security code (5 to 10 digits) helps to protect your phone against

unauthorized use. The preset code is 12345. To change the code, and to set the

phone to request the code, see Security p. 86.

PIN codes

The personal identification number (PIN) code and the universal personal

identification number (UPIN) code (4 to 8 digits) help to protect your SIM card

against unauthorized use. See Security p. 86.

The PIN2 code (4 to 8 digits) may be supplied with the SIM card and is required for

some functions.

The module PIN is required to access the information in the security module. See

Security module p. 126.

The signing PIN is required for the digital signature. See Digital signature p. 128.

PUK codes

The personal unblocking key (PUK) code and the universal personal unblocking key

(UPUK) code (8 digits) is required to change a blocked PIN code and UPIN code,

respectively. The PUK2 code (8 digits) is required to change a blocked PIN2 code. If

the codes are not supplied with the SIM card, contact your local service provider

for the codes.

Barring password

The barring password (4 digits) is required when using the Call barring service. See

Security p. 86.

■ Configuration settings service

To use some of the network services, such as mobile Internet services, MMS, Push

to talk, Nokia Xpress audio messaging, or remote Internet server synchronization,

your phone needs the correct configuration settings. You may be able to receive

the settings directly as a configuration message. After receiving the settings you

need to save them on your phone. The service provider may provide a PIN that is

needed to save the settings. For more information on availability, contact your

network operator, service provider, nearest authorized Nokia dealer, or visit the

support area on the Nokia Web site, <www.nokia.com/support>.

When you have received a configuration message, Configuration sett. received is

displayed.

To save the settings, select Show > Save. If the phone displays Enter settings' PIN:,

enter the PIN code for the settings, and select OK. To receive the PIN code, contact

the service provider that supplies the settings. If no settings are saved yet, the

received settings are saved and set as default configuration settings. Otherwise,

the phone asks Activate saved configuration settings?.

To discard the received settings, select Exit or Show > Discard.

To edit the settings, see Configuration p. 85.

■ Download content and applications

You may be able to download new content (for example, themes) to the phone

(network service). Select the download function (for example, in the Gallery

menu). To access the download function, see the respective menu descriptions. For

the availability of different services, pricing, and tariffs, contact your service

provider.

Important: Use only services that you trust and that offer adequate security and

protection against harmful software.

■ Nokia support on the Web

Check <www.nokia.com/support> or your local Nokia Web site for the latest

version of this guide, additional information, downloads, and services related to

your Nokia product.

On the Web site, you can get information on the use of Nokia product and

services. If you need to contact customer service, check the list of local Nokia Care

contact centers at www.nokia.com/customerservice.

For maintenance services, check your nearest Nokia Care services location at

www.nokia.com/repair.

1. Get started

■ Open the slide phone

To open the slide of the phone, push the upper part of the phone up.

■ Install SIM card and battery

Always switch the device off and disconnect the charger before removing

the battery.

Keep all SIM cards out of the reach of small children.

For availability and information on using SIM card services, contact your SIM

card vendor. This may be the service provider, network operator, or other

vendor.

This device is intended for use with BL-4B battery.

The SIM card and its contacts can easily be damaged by scratches or bending. Be

careful when handling, inserting, or removing the card.

Install SIM card

1. Make sure that the cover of the connector

panel is closed.

2. Slide the phone open.

3. Open the SIM card compartment (1) on

the back of the slide

4. Slide the metal SIM card holder towards

the compartment lid to release it (2).

5. Open the SIM card holder.

6. Insert the SIM card in the holder as shown (cut corner at

the upper right).

7. Close the SIM card holder, and press it down slightly.

8. To lock the SIM card holder, slide it away from the

compartment lid (1).

9. Close the SIM card compartment (2).

Install battery

Important: Always use original Nokia batteries.

See Nokia battery authentication guidelines p. 133.

1. Open the cover of the connector

panel (1).

2. Press the red release button

above the connector panel (2),

and take off the back cover of

the phone (3).

3. Observe the battery contacts, and place the battery

in the battery compartment.

4. Place the back cover in the double catch of the phone

(1) and press it down slightly (2) to close the back

cover.

■ Charge the battery

Warning: Use only batteries, chargers, and enhancements approved by Nokia for

use with this particular model. The use of any other types may invalidate any

approval or warranty, and may be dangerous.

This device is intended for use when supplied with power from an AC-4 charger.

For availability of approved enhancements, please check with your dealer.

1. Connect the charger to a wall socket.

2. Open the cover of the connector panel (1).

3. Connect the lead from the charger to the socket on the

bottom of your phone (2).

If the battery is completely discharged, it may take a few

minutes before the charging indicator appears on the display or before any calls

can be made.

The charging time depends on the charger and the battery used. For example,

charging a BL-4B battery with the AC-4 charger takes approximately 1 hour and

10 minutes while the phone is in the standby mode.

■ Switch the phone on and off

Warning: Do not switch the phone on when wireless phone use is prohibited or

when it may cause interference or danger.

Press the power key.

If the phone asks for a PIN or a UPIN code, enter the code

(displayed as ****), and select OK.

Set the time, time zone, and date

Enter the local time, select the time zone of your location in terms of the time

difference with respect to Greenwich Mean Time (GMT), and enter the date. See

Time and date p. 73.

Plug and play service

When you switch on your phone for the first time, and the phone is in the standby

mode, you are asked to get the configuration settings from your service provider

(network service). Confirm or decline the query. See "Connect to service provider

support," p. 86, and Configuration settings service p. 15.

■ Antenna

Your device has an internal antenna.

Note:As with any other radio transmitting

device, do not touch the antenna

unnecessarily when the device is switched

on. Contact with the antenna affects call

quality and may cause the device to

operate at a higher power level than

otherwise needed. Avoiding contact with

the antenna area when operating the

device optimizes the antenna performance

and the battery life.

■ Wrist strap

Apply the strap to the eyelet at the upper right corner of the

phone as shown in the picture.

2. Your phone

■ Keys and parts

Left selection key

Call key

3 Middle selection key

4 4-way navigation key

5 Right selection key

6 End key

7 Keypad

8 Volume up and PTT key

and zoom in key

9 Volume down key

and zoom out key

10 Camera release key

11 Camera flash

12 Camera lens

13 Mirror for self-portraits

14 Infrared (IR) port

15 Power key

16 Pop-Port^TMconnector

17 Back cover release button

18 Charger connector

■ Standby mode

When the phone is ready for use, and you have not entered any characters, the

phone is in the standby mode.

Display

1 Signal strength of the cellular network

2 Battery charge status

3 Indicators

4 Name of the network or the operator logo

5 Clock

6 Display area

7 Left selection key: Go to

or another function that you selected

8 Middle selection key is Menu

9 Right selection key: Names, or another function that you selected

To set the left and right selection key function, see My shortcuts p. 73. Operator

variants may have an operator-specific name to access an operator-specific Web

site.

Active standby mode

In the standby mode, the main screen shows a list of selected phone features and

information, that can be directly accessed: shortcut icons, audio functions,

calendar and notes. Scroll up or down to activate the navigation in the list. Select

Select to start a feature or View to display information. Left and right arrows at

the beginning and end of a line indicate that further information is available by

scrolling left or right. To end the active standby navigation mode, press Exit.

To switch off the active standby mode select Options > Active standby > Off or

Menu > Settings > Display > Standby mode settings >Active standby > Off.

To organize and change the active standby mode, activate the navigation mode

and select Options > Active standby > My active standby > Options and the

following options:

Personalise — to assign or change phone features in the standby mode

Organise — to move the position of features in the standby mode

Enabling standby — select keys to enable the standby navigation mode

Personal shortcut list

To view the functions in the personal shortcut list, select Go to. To activate a

function select it.

To view a list with available functions, select Go to > Options > Select options. To

add a function to the shortcut list, select Mark. To remove a function from the list,

select Unmark.

To rearrange the functions on your personal shortcut list, select Go to >

Options > Organise. Select the desired function, Move, and the place where you

want to move the function.

Shortcuts in the standby mode

• To access the list of dialed numbers, press the call key once. Scroll to the

number or name that you want; to call the number, press the call key.

• To open the web browser, press and hold 0.

• To call your voice mailbox, press and hold 1.

• Use the navigation key as a shortcut. See My shortcuts p. 73.

Power saving

The power saving mode is activated, when no function of the phone has been used

for a certain period of time. Only a small area of the display stays visible and

moves down the display. To activate the power saver, see Power saver in Display

p. 72. To deactivate the screen saver, open the slide, or press any key.

Indicators

You received one or several text or picture messages. See Read and reply

to a SMS message p. 37.

You received one or several multimedia messages. See Read a MMS and

reply p. 40.

The phone registered a missed call. See Log p. 68.

The keypad is locked. See Keypad lock (keyguard) p. 29.

The phone does not ring for an incoming call or text message when

Incoming call alert and Message alert tone are set to Off. See Tones p. 71.

The alarm clock is set to On. See Alarm clock p. 110.

The phone is registered to the GPRS or EGPRS network. See Packet data

p. 78.

A GPRS or EGPRS connection is established.See Packet data p. 78 and

Browse pages p. 120.

The GPRS or EGPRS connection is suspended (on hold), for example, if

there is an incoming or outgoing call during an EGPRS dial-up

connection.

When the infrared connection is activated, the indicator is shown

continuously.

Bluetooth connection indicator. See Bluetooth wireless technology, p. 75.

Push to talk connection is active or suspended. See Push to talk p. 101.

■ Keypad lock (keyguard)

To prevent the keys from being accidentally pressed, select Menu, and press *

within 3.5 seconds to lock the keypad. In the standby mode close the slide of the

phone, and select Lock to lock the keys.

To unlock the keypad, slide the phone open, or select Unlock, and press * or OK, if

slide is closed. If the Security keyguard is set On, enter the security code if

requested.

To answer a call when the keyguard is on, press the call key, or slide the phone

open. When you end or reject the call, the keypad automatically locks.

For Automatic keyguard and Security keyguard, see Phone p. 83.

When the keyguard is on, calls still may be possible to the official emergency number

programmed into your device.

3. Call functions

■ Make a call

1. Enter the phone number, including the area code.

For international calls, press * twice for the international prefix (the +

character replaces the international access code); then enter the country code,

the area code without the leading 0, if necessary, and the phone number.

2. To call the number, press the call key.

3. To end the call or to cancel the call attempt, press the end key.

To accept or end a call by opening or closing the slide, see Slide call handling in

Call p. 82.

To make a call using names, search for a name or phone number in Contacts. See

Search for a contact p. 58. Press the call key to call the number.

To access the list of up to 20 numbers you last called or attempted to call, press

the call key once in the standby mode. To call the number, select a number or

name, and press the call key.

Speed dialing

Assign a phone number to one of the speed-dialing keys, 2 to 9. See Speed dials

p. 66. Call the number in either of the following ways:

• Press the speed-dialing key, then press the call key.

• If Speed dialling is set to On, press and hold a speed-dialing key until the call

begins. See Speed dialling in Call p. 82.

■ Answer or reject a call

To answer an incoming call, press the call key. To end the call, press the end key, or

close the slide. See Slide call handling in Call p. 82.

To reject an incoming call, press the end key, or if the phone is open, close the

phone.

To mute the ringing tone, select Silence.

Tip: If Divert if busy is activated to divert the calls (for example, to your

voice mailbox), rejecting an incoming call also diverts the call. See Call

p. 82.

If a compatible headset supplied with a headset key is connected to the phone, to

answer and end a call, press the headset key.

Call waiting

To answer the waiting call (network service) during an active call, press the call

key. The first call is put on hold. To end the active call, press the end key.

To activate Call waiting, see Call p. 82.

■ Options during a call

Warning: Do not hold the device near your ear when the loudspeaker is in use,

because the volume may be extremely loud.

Many of the options that you can use during a call are network services. For

availability, contact your service provider.

During a call, select Options and from the following options:

Call options are Mute or Unmute, Contacts, Menu, Lock keypad, Record, Auto

volume on, Loudspeaker or Handset.

Network services options are Answer or Reject, Hold or Unhold, New call, Add to

conference, End call, End all calls and the following:

Send DTMF — to send tone strings

Swap — to switch between the active call and the call on hold

Transfer — to connect a call on hold to an active call and disconnect yourself

Conference — to make a conference call that allows up to six persons to take part

in a conference call

Private call —to discuss privately in a conference call

4. Write text

To enter text (for example, when writing messages), use traditional or predictive

text input. When using traditional text input, press a number key, 1 to 9,

repeatedly until the desired character appears. In predictive text input you can

enter a letter with a single keypress.

When you are writing text, predictive text input is indicated by

traditional text input by at the top of the display.

and

, or appear

next to the text input indicator, indicating the character case.

To change the character case and the text input mode, press #.

indicates

number mode. To change from the letter to number mode, press and hold #, and

select Number mode.

■ Settings

To set the writing language, select Options > Writing language. Predictive text

input is only available for the languages listed.

Select Options > Dictionary on to set the predictive text input or Dictionary off to

set traditional text input.

■ Predictive text input

Predictive text input is based on a built-in dictionary to which you can add new

words.

1. To start writing a word, use the 2 to 9 keys. Press each key only once for a

single letter. The word changes after each keypress.

2. When you have finished writing the word and it is correct, to confirm it, press 0

to add a space, or press any of the navigation keys. Scroll to move the cursor.

If the word is not correct, press * repeatedly, or select Options > Matches.

When the word that you want appears, confirm it.

If ? is displayed after the word, the word you intend to write is not in the

dictionary. To add the word to the dictionary, select Spell. Enter the word

(traditional text input is used), and select Save.

3. Start writing the next word.

Write compound words

Enter the first part of the word, and scroll right to confirm it. Write the next part

of the word, and confirm the word.

■ Traditional text input

Press a number key, 1 to 9, repeatedly until the desired character appears. Not all

characters available under a number key are printed on the key. The characters

available depend on the writing language. See Settings p. 33.

If the next letter you want is located on the same key as the present one, wait

until the cursor appears, or press any of the navigation keys, and enter the letter.

The most common punctuation marks and special characters are available under

the 1 key.

5. Navigate the menus

The phone offers you an extensive range of functions, which are grouped into

menus.

1. To access the menu, select Menu. To change the menu view, select Options >

Main menu view > List or Grid.

2. Scroll through the menu, and select a submenu (for example, Settings).

3. If the menu contains submenus, select the one that you want (for example,

Call).

4. If the selected menu contains further submenus, select the one that you want

(for example, Anykey answer).

5. Select the setting of your choice.

6. To return to the previous menu level, select Back. To exit the menu, select Exit.

To rearrange the menu, scroll to the menu you want to move, and selectOptions >

Organise > Move. Scroll to where you want to move the menu, and select OK. To

save the change, select Done > Yes.

6. Messaging

The message services can only be used if they are supported by your network or

your service provider.

Note: When the phone is sending the message, the animated

is shown. This is

an indication that the message has been sent by your device to the message center

number programmed into your device. This is not an indication that the message

has been received at the intended destination. For more details about messaging

services, check with your service provider.

Important: Exercise caution when opening messages. Messages may contain

malicious software or otherwise be harmful to your device or PC.

Only devices that have compatible features can receive and display messages. The

appearance of a message may vary depending on the receiving device.

■ Text messages (SMS)

Using the short message service (SMS) you can send and receive multipart

messages made of several ordinary text messages (network service).

Before you can send any text or e-mail message, you must save your message

center number. See Message settings p. 53.

To check SMS e-mail service availability and to subscribe to the service, contact

your service provider.

Your device supports the sending of text messages beyond the character limit for a single

message. Longer messages are sent as a series of two or more messages. Your service

provider may charge accordingly. Characters that use accents or other marks, and characters

from some language options like Chinese, take up more space limiting the number of

characters that can be sent in a single message.

At the top of the display, you can see the message length indicator counting

backwards from the maximum number of characters supported by the phone.

Write and send a SMS message

Use the navigation key to jump from one input field or button to the next.

1. Select Menu > Messaging > Create message > Text message.

2. Enter the recipients phone number in the input field To:, or select Add to select

the phone number from various lists.

3. Enter a message in the Message: input field. See Write text p. 33. To insert text

templates, a contact, or other items into the message, select Options. Sending

a multipart message may cost more than sending one text message, see

Templates p. 38.

4. To send the message select Send.

Read and reply to a SMS message

is shown when you receive an SMS message or an SMS e-mail.

The blinking

indicates that the message memory is full. Before you can receive

new messages, delete some of your old messages in the Inbox folder.

To view a new message, select Show. To view it later, select Exit.

To read the message later, select Menu > Messaging > Inbox. If more than one

message is received, select the message that you want to read.

indicates an

unread message.

While reading a message, select Options to delete or forward the message; edit

the message as a text message or an SMS e-mail, or move it to another folder; or

view or extract message details. You can also copy text from the beginning of the

message to your phone calendar as a reminder note.

To reply to a message, select Reply > Text message, Multimedia, or Audio

message. Enter the reply message. When replying to an e-mail, first confirm or

edit the e-mail address and subject.

To send the message to the displayed number, select Send or press the call key.

Templates

Your phone has text templates

that you can use in text or SMS e-mail

messages.

To access the template list, select Menu > Messaging > Saved items > Templates.

■ Multimedia messages (MMS)

A multimedia message can contain text, sound, a picture, a calendar note, a

business card, or a video clip. If the message is too large, the phone may not be

able to receive it. Some networks allow text messages that include an Internet

address where you can view the multimedia message.

To set the settings for multimedia messaging, see Multimedia p. 55. To check

availability and to subscribe to the multimedia messaging service, contact your

service provider.

You cannot receive multimedia messages during a call, a game, another Java

application, or an active browsing session over GSM data. Because delivery of

multimedia messages can fail for various reasons, do not rely solely upon them for

essential communications.

Write and send a MMS

1. Select Menu > Messaging > Create message > Multimedia.

2. To compose your message, select an input window, Insert, and from the

following options.

Text — to write a text

Image, Sound clip or Video clip — to insert a file from Gallery, or to take a new

image or to record a new video or sound clip to be added to the message

Business card — to insert a contact from Names

Calendar note — to insert a note from Calendar

Slide — to insert a slide to the message. Your phone supports multimedia

messages that contain several pages (slides). Each slide can contain text, one

image, a calendar note, a business card, and one sound clip. To open a desired

slide if the message contains several slides, select Options > Previous slide or

Next slide. To set the interval between the slides, select Options > Slide timing.

To move a slide component within the message, select Options > Move slide.

3. To send the message, select Send. Enter the recipients phone number in the

input field To:, or select Add to select the phone number from various lists.

Optionally enter a text in the input field Subject:. Select the field Presentation:

and Edit to add or remove multimedia objects.

Select Send to move the message to the Outbox folder for sending.

While the multimedia message is being sent, the animated indicator

displayed and you can use other functions on the phone. If the sending fails,

the phone tries to resend it a few times. If this fails, the message remains in the

Outbox folder, and you can try to resend it later.

If you select Save sent messages > Yes, the sent message is saved in the Sent

items folder. See Multimedia p. 55. When the message is sent, it is not an

indication that the message has been received at the intended destination.

content from being copied, modified, transferred or forwarded.

Read a MMS and reply

Important: Exercise caution when opening messages. Multimedia message

objects may contain malicious software or otherwise be harmful to your device or

PC.

When a multimedia message has been received, the text Multimedia message

received is shown.

1. To read the message, select Show. To view it later, select Exit. To read the

message later, select Menu > Messaging > Inbox. In the list of messages,

indicates an unread message. Select the message that you want to view.

2. The function of the middle selection key changes according to the currently

displayed attachment in the message:

To view the whole message if the received message contains a presentation, a

sound clip, or view a video clip, select Play.

To view a business card or calendar note or to open a theme object, select

Open.

3. To reply to the message, select Options > Reply > Text message, Multimedia,

or Audio message. Enter the reply message, and select Send. You can send the

reply message only to the person who sent you the original message.

Select Options to access available options.

■ Flash messages

Flash messages are text messages that are instantly displayed upon reception.

Write a flash message

Select Menu > Messaging > Create message > Flash message. Write your

message. The maximum length of a flash message is 70 characters.

Receive a flash message

A received flash message is not automatically saved. To read the message, select

Read. To extract phone numbers, e-mail addresses, and Web site addresses from

the current message, select Options > Use detail. To save the message, select Save

and the folder in which you want to save the message.

■ Nokia Xpress audio messaging

With this menu, use the multimedia message service to create and send a voice

message in a convenient way. Multimedia messaging service must be activated

before this service can be used.

Create and send an audio message

1. Select Menu > Messaging > Create message > Audio message. The recorder

opens. To use the recorder, see Recorder p. 99.

2. When you have stopped the recording, enter the recipients phone number in

the input field To:, or select Add to select the phone number from various lists.

3. Scroll down to the message field, and select Play to check the message before

sending.

Select Options > Replace sound clip to repeat the recording, Save message,

Save sound clip to save the recording in Gallery, or Add subject to insert a

subject to the message.

4. To send the message, select Send.

Receive an audio message

When your phone is receiving an audio message, 1 audio message received is

shown. Select Play to open the message or select Show > Play if there are more

than one message received. Select Options to see the options available. To listen

to the message later, select Exit. To save the message, select Options > Save

sound clip and the folder in which you want to save the message.

■ Memory full

When you are receiving a message and the memory for the messages is full,

Memory full. Unable to receive msgs. is shown. To first delete old messages, select

OK > Yes and the folder. Scroll to the desired message, and select Delete. If one or

more messages are marked, select Mark. Mark all the messages you want to

delete, and select Options > Delete marked.

■ Folders

The phone saves received text and multimedia messages in the Inbox folder.

Multimedia messages that have not yet been sent are moved to the Outbox folder.

If you select Menu > Messaging > Message settings > General settings > Save

sent messages > Yes, the sent messages are saved in the Sent items folder.

To save the message that you create and wish to send later in the Saved items

folder, select Options > Save message > Saved messages.

indicates unsent

messages.

To organize your text messages, you can add new folders for your messages. Select

Messaging > Saved items.

To add a folder, select Options > Add folder. To delete or rename a folder, scroll to

the desired folder, and select Options > Delete folder or Rename folder.

To move a file to an other folder, highlight the file, and select Options > Move.

Delivery reports contains delivery information on messages you have sent.

■ E-mail application

The e-mail application (network service) allows you to access your compatible e-

mail account from your phone when you are not in the office or at home. This e-

mail application is different from the SMS and MMS e-mail function.

Your phone supports POP3 and IMAP4 e-mail servers. Before you can send and

retrieve any e-mail, you may need to do the following:

• Obtain a new e-mail account or use the current one. For availability of your

e-mail account contact your e-mail service provider.

• For the settings required for e-mail, contact your e-mail service provider. You

may receive the e-mail configuration settings as a configuration message. See

Configuration settings service p. 15. You can also enter the settings manually.

See Configuration p. 85.

To activate the e-mail settings, select Menu > Messaging > Message

settings > E-mail messages. See E-mail p. 56.

This application does not support keypad tones.

Write and send an e-mail

1. Select Menu > Messaging > E-mail > Create e-mail.

2. Enter the recipient’s e-mail address, a subject, and the e-mail message.

To attach a file to the e-mail, select Options > Attach and the file in Gallery.

3. Select Send > Send now.

Download e-mail

1. To access the e-mail application, select Menu > Messaging > E-mail.

2. To download e-mail messages that have been sent to your e-mail account,

select Retrieve.

To download new e-mail messages and to send e-mail that has been saved in

the Outbox folder, select Options > Retrieve and send.

To download first the headings of the new e-mail messages that have been

sent to your e-mail account, select Options > Check new e-mail. Then, to

download the selected e-mail, mark the desired ones, and select Options >

Retrieve.

3. Select the new message in Inbox. To view it later, select Back.

indicates an unread message.

Read and reply to e-mail

Important: Exercise caution when opening messages. E-mail messages may

contain malicious software or otherwise be harmful to your device or PC.

Select Menu > Messaging > E-mail > Inbox and the desired message. While

reading the message, select Options to view the available options.

To reply to an e-mail, select Reply > Empty screen or Original text. To reply to

many, select Options > Reply to all. Confirm or edit the e-mail address and

subject; then write your reply. To send the message, select Send > Send now.

Inbox and other folders

Your phone saves e-mail that you have downloaded from your e-mail account in

Inbox folder. Other folders contains the following folders: Drafts for saving

unfinished e-mail, Archive for organizing and saving your e-mail, Outbox for

saving e-mail that has not been sent, and Sent items for saving e-mail that has

been sent.

To manage the folders and their e-mail content, select Options > Manage folder.

Delete e-mail messages

Select Menu > Messaging > E-mail > Options > Manage folder and the desired

folder. Mark the messages that you want to delete. To delete them, select

Options > Delete.

Deleting an e-mail from your phone does not delete it from the e-mail server. To

set the phone to delete the e-mail also from the e-mail server, select Menu >

Messaging > E-mail > Options > Extra settings > Leave copy: > Delete retr. msgs.

■ Instant messaging (IM)

Instant messaging (network service) is a way to send short, simple text messages

to online users.

Before you can use instant messaging, you must subscribe to the service. To check

the availability and costs, and to subscribe to the service, contact your network

operator, from whom you also receive your unique ID, password, and settings.

To set the required settings for the instant messaging service, see Connect.

settings in Access the IM menu p. 47. The icons and texts on the display may vary,

depending on the instant messaging service.

Depending on the network, the active instant messaging conversation may

consume the phone battery faster, and you may need to connect the phone to a

charger.

Access the IM menu

To access the menu while still offline, select Menu > Messaging > Instant

messages. If more than one set of connection settings for the instant messaging

service is available, select the desired one. If there is only one set defined, it is

selected automatically.

The following options are shown:

Saved convers. — to view, erase or rename the instant messaging conversations

that you have saved during the instant messaging session

Connect. settings — to edit the settings needed for messaging and presence

connection

Connect to the IM service

To connect to the instant messaging service, enter the Instant messages menu,

activate an instant messaging service, and select Login. When the phone has

successfully connected, Logged in is displayed.

To disconnect from the instant messaging service, select Logout.

Start an IM session

Open the Instant messages menu, and connect to the service. Start the service in

different ways.

Select Conversations to view the list of new and read instant messages or

invitations for instant messaging during the active instant messaging session.

Scroll to the message or invitation that you want, and select Open to read the

message.

indicates the new and

read group messages.

indicates the new and

the read instant messages.

indicates the invitations.

The icons and texts on the display may vary, depending on the instant messaging

service.

Select IM contacts to view the contacts that you have added. Scroll to the contact

with whom you would like to chat, and select Chat or Open if a new contact is

shown in the list. To add contacts see Contacts for IM p. 51.

indicates the

the offline contacts in the phone contacts memory. indicates a

indicates a contact that has been sent a new message.

online and

blocked contact.

Select Groups > Public groups to display the list of bookmarks to public groups

provided by the network operator. To start a instant messaging session with a

group, scroll to a group, and select Join. Enter your screen name that you want to

use in the conversation. When you have successfully joined the group

conversation, you can start a group conversation. To create a private group, see

Groups p. 51.

Select Search > Users or Groups to search for other instant messaging users or

public groups on the network by phone number, screen name, e-mail address, or

name. If you select Groups, you can search for a group by a member in the group

or by group name, topic, or ID.

To start the conversation when you have found the user or the group that you

want, select Options > Chat or Join group.

Start a conversation from Contacts, see View the subscribed names p. 63.

Accept or reject an invitation

In the standby mode, when you are connected to the instant messaging service

and you receive a new invitation, New invitation received is displayed. To read it,

select Read. If more than one invitation is received, scroll to the invitation you

want, and select Open. To join the private group conversation, select Accept, and

enter the screen name; or to reject or delete the invitation, select Options >

Reject or Delete.

Read a received instant message

In the standby mode, when you are connected to the instant messaging service,

and you receive a new message that is not a message associated with an active

conversation, New instant message is displayed. To read it, select Read. If you

receive more than one message, scroll to the message, and select Open.

New messages received during an active conversation are held in Instant

messages > Conversations. If you receive a message from someone who is not in

IM contacts, the sender ID is displayed. To save a new contact that is not in the

phone memory, select Options > Save contact.

Participate in a conversation

To join or start an instant messaging session, select Write. Write your message,

and select Send or press the call key to send it. Select Options to access available

options.

Edit your availability status

1. Open the Instant messages menu, and connect to the instant messaging

service.

2. To view and edit your own availability information or screen name, select My

settings.

3. To allow all the other instant messaging users to see you when you are online,

select Availability > Available for all.

To allow only the contacts on your instant messaging contact list to see you

when you are online, select Availability > Avail. for contacts.

To appear as being offline, select Availability > Appear offline.

When you are connected to the instant messaging service,

are online, and indicates that you are not visible to others.

indicates that you

Contacts for IM

To add contacts to the instant messaging contacts list, connect to the instant

messaging service, and select IM contacts. To add a contact to the list, select

Options > Add contact or Add (if you have no contacts added) > Enter ID

manually, Search from serv., Copy from server, or By mobile number.

Scroll to a contact. To start a conversation, select Chat or Options and from the

available options.

Block and unblock messages

To block messages, connect to the instant messaging service, and select

Conversations > IM contacts; or join or start a conversation. Scroll to the contact

from whom you want to block incoming messages, and select Options > Block

contact > OK.

To unblock the messages, connect to the instant messaging service, and select

Blocked list. Scroll to the contact from whom you want to unblock the messages,

and select Unblock.

Groups

You can create your own private groups for an instant messaging conversation, or

use the public groups provided by the service provider. The private groups exist

only during an instant messaging conversation. The groups are saved on the server

of the service provider. If the server you are logged on to does not support group

services, all group-related menus are dimmed.

Public groups

Groups — You can bookmark public groups that your service provider may

maintain. Connect to the instant messaging service, and select Public groups.

Scroll to a group with which you want to chat, and select Join. If you are not in

the group, enter your screen name as your nickname for the group. To delete a

group from your group list, select Options > Delete group.

To search for a group, select Groups > Public groups > Search groups. You can

search for a group by a member in the group, by group name, topic, or ID.

Create a private group

Connect to the instant messaging service, and select Groups > Create group. Enter

the name for the group and the screen name that you want to use. Mark the

private group members in the contacts list, and write an invitation.

■ Voice messages

The voice mailbox is a network service and you may need to subscribe to it. For

details, contact your service provider.

To call your voice mailbox, select Menu > Messaging > Voice messages > Listen to

voice messages. To enter, search for, or edit your voice mailbox number, select

Voice mailbox number.

If supported by the network,

indicates that there are new voice messages.

Select Listen to call your voice mailbox number.

■ Info messages

Select Menu > Messaging > Info messages. With the Info messages network

service, you can receive messages on various topics from your service provider. To

check availability, topics, and the relevant topic numbers, contact your service

provider.

■ Service commands

Select Menu > Messaging > Service commands. Write and send service requests

(also known as USSD commands) to your service provider, such as activation

commands for network services.

■ Delete messages

To delete messages, select Menu > Messaging > Delete messages > By message

to delete single messages, By folder to delete all messages from a folder, or All

messages. If a folder contains unread messages, the phone asks whether you want

to delete them also.

■ Message settings

General settings

Select Menu > Messaging > Message settings > General settings and from the

following options:

Save sent messages > Yes — set the phone to save the sent messages in the Sent

items folder

Font size — to change the font size for reading and writing messages. Large font is

only available for Latin fonts.

Graphical smileys > Yes — to replace character-based smileys with graphical ones

Text messages and SMS e-mail

The message settings affect the sending, receiving, and viewing of messages.

Select Menu > Messaging > Message settings > Text messages and from the

following options:

Delivery reports — to ask the network to send delivery reports about your

messages (network service)

Message centres and E-mail message centres — to edit the name and number of

the message and e-mail delivery centres. The number can be obtained from the

network operator.

Message centre in use or E-mail centre in use— to select the message centre to be

used

Message validity — to select the length of time for which the network attempts to

deliver your message

Messages sent via — to select the format of the messages to be sent: Text, Paging,

or Fax (network service)

Use packet data > Yes — to set GPRS as the preferred SMS bearer

Character support > Full — to select all characters in the messages to be sent as

viewed. If you select Reduced, characters with accents and other marks may be

converted to other characters. When writing a message, you can check how the

message will look to the recipient by previewing the message. See Write and send

a SMS message p. 37.

Reply via same centre > Yes — to allow the recipient of your message to send you a

reply using your message center (network service)

Multimedia

The message settings affect the sending, receiving, and viewing of multimedia

messages.

Select Menu > Messaging > Message settings > Multimedia msgs. and from the

following options:

Delivery reports — to ask the network to send delivery reports about your

messages (network service)

Default slide timing — to define the default time between slides in multimedia

messages

Allow multimedia reception > Yes or No — to receive or to block the multimedia

message. If you select In home network, you cannot receive multimedia messages

when outside your home network.

Incoming multimedia messages > Retrieve, Retrieve manually, or Reject — to

allow the reception of multimedia messages automatically, manually after being

prompted, or to reject the reception

Allow adverts — to receive or reject advertisements. This setting is not shown if

Allow multimedia reception is set to No.

Configuration settings > Configuration — Only the configurations that support

multimedia messaging are shown. Select a service provider, Default, or Personal

config. for multimedia messaging. Select Account and select a multimedia

messaging service account contained in the active configuration settings.

E-mail

The settings affect the sending, receiving, and viewing of e-mail.

You may receive the configuration settings for the e-mail application as a

configuration message. See Configuration settings service p. 15. You can also

enter the settings manually. See Configuration p. 85.

Select Menu > Messaging > Message settings > E-mail messages and from the

following options:

Configuration — Select the set that you would like to activate.

Account — Select an account provided by the service provider.

My name — Enter your name or nickname.

E-mail address — Enter the e-mail address.

Include signature — Define a signature that is automatically added to the end of

your e-mail when you write your message.

Reply-to address — Enter the e-mail address to which you want the replies to be

sent.

SMTP user name — Enter the name that you want to use for outgoing mail.

SMTP password — Enter the password that you want to use for outgoing mail.

Display terminal window > Yes — To perform manual user authentication for

intranet connections.

Incoming server type > POP3 or IMAP4 — Identify the type of e-mail system that

you want to use. If both types are supported, select IMAP4.

Incoming mail settings — Select available options for POP3 or IMAP4.

7. Contacts

You can save names and phone numbers (Contacts) in the phone memory and in

the SIM card memory.

The phone memory may save contacts with numbers and text items. You can also

save an image for a certain number of names.

Names and numbers saved in the SIM card memory, are indicated by

■ Search for a contact

Select Menu > Contacts > Names. Scroll through the list of contacts, or enter the

first letter of the name for which you are searching.

■ Save names and phone numbers

Names and numbers are saved in the used memory. Select Menu > Contacts >

Names > Options > Add new contact. Enter the name and the phone number.

■ Save details

In the phone memory for contacts, you can save different types of phone numbers

and short text items per name.

The first number you save is automatically set as the default number. It is

indicated with a frame around the number type indicator (for example,

When you select a name (for example, to make a call), the default number is used

unless you select another number.

1. Make sure that the memory in use is either Phone or Phone and SIM. See

Settings p. 64.

2. Scroll to the name to which you want to add a new number or text item, and

select Details > Options > Add detail.

3. To add a number, select Number and one of the number types.

To add another detail, select a text type or an image from Gallery.

To search for an ID from the server of your service provider if you have

connected to the presence service, select User ID > Search. See My presence

p. 61. If only one ID is found, it is automatically saved. Otherwise, to save the

ID, select Options > Save. To enter the ID, select Enter ID manually.

To change the number type, scroll to the desired number, and select Options >

Change type. To set the selected number as the default number, select Set as

default.

4. Enter the number or text item; to save it, select Save.

5. To return to the standby mode, select Back > Exit.

■ Copy contacts

Search for the contact you want to copy, and select Options > Copy. You can copy

names and phone numbers from the phone contact memory to the SIM card

memory, or vice versa. The SIM card memory can save names with one phone

number attached to them.

■ Edit contact details

1. Search for the contact you want to edit, select Details, and scroll to the desired

name, number, text item, or image.

2. To edit a name, number, or text item, or to change an image, select Options >

Edit.

You cannot edit an ID when it is on the IM contacts or Subscribed names list.

■ Delete contacts or contact details

To delete all the contacts and the details attached to them from the phone or SIM

card memory, select Menu > Contacts > Delete all contacts > From phone mem.

or From SIM card. Confirm with the security code.

To delete a contact, search for the desired contact, and select Options > Delete

contact.

To delete a number, text item, or an image attached to the contact, search for the

contact, and select Details. Scroll to the desired detail, and select Options >

Delete > Delete number, Delete detail, or Delete image. Deleting an image from

contacts does not delete it from Gallery.

■ Business cards

You can send and receive a person’s contact information from a compatible device

that supports the vCard standard as a business card.

To send a business card, search for the contact whose information you want to

send, and select Details > Options > Send bus. card > Via multimedia, Via text

message, Via infrared, or Via Bluetooth.

When you have received a business card, select Show > Save to save the business

card in the phone memory. To discard the business card, select Exit > Yes.

■ My presence

With the presence service (network service) you can share your presence status

with other users with compatible devices and access to the service. Presence

status includes your availability, status message, and personal logo. Other users

who have access to the service and who request your information are able to see

your status. The requested information is shown in Subscribed names in the

viewers’ Contacts menu. You can personalize the information that you want to

share with others and control who can see your status.

Before you can use presence, you must subscribe to the service. To check the

availability, and costs, and to subscribe to the service, contact your network

operator, from whom you also receive your unique ID, password, and the settings

for the service. See Configuration p. 85.

While you are connected to the presence service, you can use the other functions

of the phone; the presence service is active in the background. If you disconnect

from the service, your presence status is shown for a certain amount of time to

viewers, depending on the service provider.

Select Menu > Contacts > My presence and select from the following options:

Connect to 'My presence' service or Disconnect from service — to connect to or

disconnect from the service

View my presence — to view the status in Private pres. and Public presence

Edit my presence > My availability, My presence message, My presence logo , or

Show to — to change your presence status

My viewers > Current viewers, Private list, or Blocked list

Settings > Show current presence in idle, Connection type, or Presence settings

■ Subscribed names

You can create a list of contacts whose presence status information you want to

be aware of. You can view the information if it is allowed by the contacts and the

network. To view these subscribed names, scroll through the contacts or use the

Subscribed names menu.

Make sure that the memory in use is either Phone or Phone and SIM. See Settings

p. 64.

To connect to the Presence service, select Menu > Contacts > My presence >

Connect to 'My presence' service.

Add contacts to the subscribed names

1. Select Menu > Contacts > Subscribed names.

2. If you have no contacts on your list, select Add. Otherwise, select Options >

Subscribe new. The list of your contacts is shown.

3. Select a contact from the list and if the contact has an user ID saved, the

contact is added to the subscribed names list.

View the subscribed names

To view the presence information, see Search for a contact p. 58.

1. Select Menu > Contacts > Subscribed names.

The status information of the first contact on the subscribed names list is

displayed. The information that the person wants to give to the others may

include text and some of the following icons:

, or indicates that the person is available, discreet, or not available.

indicates that the person’s presence information is not available.

2. Select Details to view the details of the selected contact; or select Options >

Subscribe new, Chat, Send message, Send bus. card, or Unsubscribe.

Unsubscribe a contact

To unsubscribe a contact from the Contacts list, select the contact and Details >

the user ID > Options > Unsubscribe > OK.

To unsubscribe, use the Subscribed names menu. See View the subscribed names

p. 63.

■ Settings

Select Menu > Contacts > Settings and from the following options:

Memory in use — to select SIM card or phone memory for your contacts

Contacts view — to select how the names and numbers in contacts are displayed

Name display — to view the Last name first or the First name first in the contacts

list

Font size — to change the font size for reading and writing messages. Large font is

only available for Latin fonts.

Memory status — to view the free and used memory capacity

■ Groups

Select Menu > Contacts > Groups to arrange the names and phone numbers

saved in the memory into caller groups with different ringing tones and group

images.

■ Voice dialing

You can make a phone call by saying a voice tag that has been added to a phone

number. Any spoken words, such as a name, can be a voice tag. The number of

voice tags you can create is limited.

Before using voice tags, note that:

•

Voice tags are not language-dependent. They are dependent on the speaker's voice.

You must say the name exactly as you said it when you recorded it.

•

Voice tags are sensitive to background noise. Record voice tags and use them in a quiet

environment.

Very short names are not accepted. Use long names and avoid similar names for different

numbers.

Note: Using voice tags may be difficult in a noisy environment or during an

emergency, so you should not rely solely upon voice dialing in all circumstances.

Add and manage voice tags

Save or copy to the phone memory the contacts for which you want to add a voice

tag. You can also add voice tags to the names in the SIM card, but if you replace

your SIM card with a new one, you first must delete the old voice tags before you

can add new ones.

1. Search for the contact to which you want to add a voice tag.

2. Select Details, scroll to the desired phone number, and select Options > Add

voice tag.

3. Select Start, and say clearly the words you want to record as a voice tag. After

recording, the phone plays the recorded tag.

appears after the phone number with a voice tag in Contacts.

To check the voice tags, select Menu > Contacts > Voice tags. Scroll to the

contact with the voice tag that you want, and select an option to listen to, delete,

or change the recorded voice tag.

Make a call by using a voice tag

If the phone has an application running that is sending or receiving data using a

packet data connection, you must end the application before voice dialing.

1. In the standby mode, press and hold the volume down key or the right selection

key. A short tone is heard, and Speak now is displayed.

2. Say the voice tag clearly. The phone plays the recognized voice tag, and dials

the phone number of the voice tag after 1.5 seconds.

If you are using a compatible headset with the headset key, press and hold the

headset key to start the voice dialing.

■ Speed dials

To assign a number to a speed-dialing key, select Menu > Contacts > Speed dials,

and scroll to the speed-dialing number that you want.

Select Assign, or if a number has already been assigned to the key, select

Options > Change. Select Search, the name, then the number you want to assign.

If the Speed dialling function is off, the phone asks whether you want to activate

it. See also Speed dialling in Call p. 82.

To make a call using the speed-dialing keys, see Speed dialing p. 31.

■ Info, service, and my numbers

Select Menu > Contacts and from one of these submenus:

Info numbers — to call the information numbers of your service provider if the

numbers are included on your SIM card (network service)

Service numbers — to call the service numbers of your service provider if the

numbers are included on your SIM card (network service)

My numbers — to view the phone numbers assigned to your SIM card, if the

numbers are included on your SIM card

8. Log

The phone registers the phone numbers of identified missed, received, and dialed

calls; the message recipients; and the approximate length of your calls.

The phone registers if it is switched on and within the network’s service area, and

the network supports these functions.

■ Recent calls lists

Select Menu > Log > Call log, Missed calls, Received calls, Dialled numbers, or

Message Recipients to view the call lists. Select Options to view the time of a call;

edit, view, or call the registered phone number; add it to the memory; or delete it

from the list. You can also send a text message. To delete the recent calls lists,

select Clear log lists.

■ Counters and timers

Note: The actual invoice for calls and services from your service provider may vary,

depending upon network features, rounding off for billing, taxes and so forth.

Some timers may be reset during service or software upgrades.

Select Menu > Log > Call duration, Packet data counter, or Packet data conn.

timer for approximate information on your recent communications.

■ Positioning information

The network may send you a positioning request. You can ensure that the network

delivers positioning information of your phone only if you approve it (network

service). Contact your network operator to subscribe and to agree upon the

delivery of positioning information.

To accept or reject the positioning request, select Accept or Reject. If you miss the

request, the phone automatically accepts or rejects it according to what you have

agreed with your network operator. The phone displays 1 missed position request.

To view the missed positioning request, select Show.

To view the information on the 10 most recent privacy notifications and requests

or to delete them, select Menu > Log > Positioning > Position log > Open folder or

Delete all.

9. Settings

■ Profiles

Your phone has various setting groups, called profiles, for which you can

customize the phone tones for different events and environments.

Select Menu > Settings > Profiles. Scroll to a profile, and select it.

To activate the selected profile, select Activate.

To set the profile to be active until a certain time up to 24 hours, select Timed, and

set the time the profile setting shall end. When the time set for the profile expires,

the previous profile that was not timed, becomes active.

To personalize the profile, select Personalise. Select the setting you want to

change, and make the changes.

■ Themes

A theme contains many elements for personalizing your phone, such as wallpaper,

screen saver, color scheme, and a ringing tone.

Select Menu > Settings > Themes and from the following options:

Select theme — to set a theme in your phone. A list of folders in Gallery opens.

Open the Themes folder, and select a theme.

Theme downloads — to open a list of links to download more themes. See

Download files p. 124.

■ Tones

You can change the settings of the selected active profile.

Select Menu > Settings > Tones. Select and change the available tone options.

You can find the same settings in the Profiles menu. See Profiles p. 70.

To set the phone to ring only for calls from phone numbers that belong to a

selected caller group, select Alert for. Scroll to the caller group you want or All

calls, and select Mark. Select Save to save the settings or Cancel to leave the

settings unchanged.

If you select the highest ringing tone level, the ringing tone reaches its highest level after a

few seconds.

■ Display

Standby mode settings

Select Menu > Settings > Display > Standby mode settings and from the

following options:

Active standby — to switch the active standby mode on or off and to organize and

personalize the active standby mode. See Active standby mode p. 25.

Wallpaper — to add the background image to the display in standby mode. To

activate, or deactivate the wallpaper, select On or Off. Select Image to select an

image from the Gallery or Slide set and a folder in the Gallery to use the images in

the folder as a slide set. To download more images for wallpaper, select Graphic

downloads.

Idle state font colour — to select the color for the texts on the display in the

standby mode

Navigation key icons > On — to display the icons of the current navigation key

shortcuts in the standby mode when active standby is off

Operator logo — to set your phone to display or hide the operator logo. The menu

is dimmed, if you have not saved the operator logo. For more information on

availability of an operator logo, contact your network operator.

Cell info display > On — to display the cell identity, if available from the network

Other display settings

Select Menu > Settings > Display and from the following options:

Screen saver > On — to activate the screen saver for the main display. To set the

time after which the screen saver is activated, select Time-out. Select Screen

savers to choose an Image, a Slide set, or a Video clip from the Gallery or Digital

clock to be used as screensaver. To download more images for the screen saver,

select Graphic downloads.

Power saver > On — to save some battery power. A digital clock is displayed when

no function of the phone is used for a certain time.

Font size > Messaging, Contacts, or Web — to set the font size

■ Time and date

To change the time, time zone, and date settings, select Menu > Settings > Time

and date > Clock, Date, or Auto-update of date & time (network service).

When traveling to a different time zone, select Menu > Settings > Time and

date > Clock > Time zone and the time zone of your location in terms of the time

difference with respect to Greenwich Mean Time (GMT) or Universal Time

Coordinated (UTC). The time and date are set according to the time zone and

enable your phone to display the correct sending time of received text or

multimedia messages. For example, GMT -5 denotes the time zone for New York

(USA), 5 hours west of Greenwich/London (UK).

■ My shortcuts

With personal shortcuts you get quick access to often used functions of the

phone.

Left and right selection key

To set one phone function from a predefined list to the left or right selection key,

select Menu > Settings > My shortcuts > Left selection key or Right selection key.

See Standby mode p. 25. These menus may not be shown, depending on your

service provider.

Navigation key

To assign other phone functions from a predefined list to the navigation key,

select Menu > Settings > My shortcuts > Navigation key.

Enabling standby

To select keys to enable the standby navigation mode, select Menu > Settings >

My shortcuts > Enabling standby.

Voice commands

To activate phone functions by saying a voice tag, select Menu > Settings > My

shortcuts > Voice commands. Select a folder, scroll to a function to which you

want to add a voice tag, and select Add.

indicates a voice tag.

To add a voice command, see Add and manage voice tags p. 65. To activate a voice

command, see Make a call by using a voice tag p. 66.

■ Connectivity

You can connect the phone to a compatible device using an infrared, Bluetooth

wireless technology, or USB data cable connection. You can also define the

settings for packet data dial-up connections.

Bluetooth wireless technology

This device is compliant with Bluetooth Specification 2.0 + EDR supporting the following

profiles: SIM access profile, object push profile, file transfer profile, dial-up networking

profile, headset profile, hands-free profile, generic access profile, serial port profile, and

generic object exchange profile. To ensure interoperability between other devices

supporting Bluetooth technology, use Nokia approved enhancements for this model. Check

with the manufacturers of other devices to determine their compatibility with this device.

There may be restrictions on using Bluetooth technology in some locations. Check with your

local authorities or service provider.

Features using Bluetooth technology, or allowing such features to run in the background

while using other features, increase the demand on battery power and reduces the battery

life.

Bluetooth technology allows you to connect the phone to a compatible Bluetooth

device within 10 meters. Since devices using Bluetooth technology communicate

using radio waves, your phone and the other devices do not need to be in direct

line-of-sight, although the connection can be subject to interference from

obstructions such as walls or from other electronic devices.

Set up a Bluetooth connection

Select Menu > Settings > Connectivity > Bluetooth. Select from the following

options:

Bluetooth > On or Off — to activate or deactivate the Bluetooth function.

indicates an active Bluetooth connection.

Search for audio enhancements — to search for compatible Bluetooth audio

devices. Select the device that you want to connect to the phone.

Paired devices — to search for any Bluetooth device in range. Select New to list

any Bluetooth device in range. Scroll to a device, and select Pair. Enter the

Bluetooth passcode of the device to associate (pair) the device to your phone. You

only must give this passcode when you connect to the device for the first time.

Your phone connects to the device, and you can start data transfer.

Bluetooth wireless connection

Select Menu > Settings > Connectivity > Bluetooth. To check which Bluetooth

connections are currently active, select Active device. To view a list of Bluetooth

devices that are currently paired with the phone, select Paired devices.

Select Options to access available options depending on the status of the device

and the Bluetooth connection. Select Assign short name, Auto-conn. without

confirmation., Delete pairing or Pair new device.

Bluetooth settings

To define how your phone is shown to other Bluetooth devices, select Menu >

Settings > Connectivity > Bluetooth > Bluetooth settings > My phone's visibility

or My phone's name.

If you are concerned about security, turn off Bluetooth or set My phone's visibility to

Hidden. Always accept only Bluetooth communication from others with whom you agree.

Infrared

You can set up the phone to send and receive data through its infrared (IR) port. To

use an IR connection, the device with which you want to establish a connection

must be IrDA compliant. You can send or receive data to or from a compatible

phone or data device (for example, a computer) through the IR port of your phone.

Do not point the IR (infrared) beam at anyone's eyes or allow it to interfere with other IR

devices. Infrared devices are Class 1 laser products.

When sending or receiving data, ensure that the IR ports of the sending and

receiving devices are pointing at each other and that there are no obstructions

between the devices.

To activate the IR port of your phone to receive data using IR, select Menu >

Settings > Connectivity > Infrared.

To deactivate the IR connection, select Menu > Settings > Connectivity >

Infrared. When the phone displays Deactivate infrared?, select Yes.

If data transfer is not started within 2 minutes after the activation of the IR port,

the connection is cancelled and must be started again.

IR connection indicator

When

is shown continuously, the IR connection is activated, and your phone

is ready to send or receive data through its IR port.

When

blinks, your phone is trying to connect to the other device, or a

connection has been lost.

Packet data

General packet radio service (GPRS) is a network service that allows mobile

phones to send and receive data over an Internet protocol (IP)based network.

GPRS is a data bearer that enables wireless access to data networks such as the

Internet.

Enhanced GPRS (EGPRS) is similar to GPRS but enables faster connections. For

more information on availability of EGPRS and data transfer speed, contact your

network operator.

The applications that may use EGPRS are MMS, video streaming, Push to talk,

browsing sessions, e-mail, remote SyncML, Java application downloading, and the

PC dial-up.

When you have selected GPRS as a data bearer, the phone uses EGPRS instead of

GPRS if this is available in the network. You cannot select between EGPRS and

GPRS, but for some applications you may be able to select GPRS or GSM data

(circuit switched data, CSD).

Packet data settings

You can connect the phone using Bluetooth wireless technology, infrared, or USB

data cable connection to a compatible PC and use the phone as a modem to

enable EGPRS for packet data connectivity from the PC.

To define the settings for packet data connections from your PC, select Menu >

Settings > Connectivity > Packet data > Packet data settings > Active access

point, activate the access point you want to use, and select Edit active access

point. Select Alias for access point, enter a name to change the access point

settings, and select OK. Select Packet data access point, enter the access point

name (APN) to establish a connection to an packet data network, and select OK.

You can also set the packet data dial-up service settings (access point name) on

your PC using the Nokia Modem Options software. See PC Suite on page 130. If

you have set the settings both on your PC and on your phone, the PC settings are

used.

Data transfer and synchronisation

Synchronize your calendar, contacts data, and notes with another compatible

device (for example, a mobile phone, a compatible PC, or a remote Internet server

(network service)).

Partner list

To copy or synchronize data from your phone, the name of the device and the

settings must be in the list of partners in transfer contacts. If you receive data

from another device (for example, a compatible mobile phone), the partner is

automatically added to the list, using the contact data from the other device.

Server sync and PC sync are the original items in the list.

To add a new partner to the list (for example a new device), select Menu >

Settings > Connectivity > Data transfer > Options > Add contact > Phone sync or

Phone copy, and enter the settings according to the transfer type.

To edit the copy and synchronize settings, select a contact from the partner list

and Options > Edit.

To delete a partner, select a contact from the partner list and Options > Delete,

and confirm Delete transfer contact?. You cannot delete Server sync or PC sync.

Data transfer with a compatible device

For synchronization, Bluetooth wireless technology or infrared is used. The other

device is in the standby mode.

To start data transfer, select Menu > Settings > Connectivity > Data transfer and

the transfer partner from the list, other than Server sync or PC sync. According to

the settings, the selected data is copied or synchronized. The other device also

must be activated for receiving data.

Data transfer without SIM card

Your phone allows data transfer when the SIM card is not inserted.

Switch on your phone with no SIM card inserted, and select Transfer and from the

following options:

Transfer contacts — to select a contact, other than Server sync and PC sync, from

the partner list to transfer data from your phone. The phone starts a

synchronization or copy session.

Receive data > Via Bluetooth or Via infrared — to receive data from the other

phone

Synchronize from a compatible PC

Before you synchronize data from calendar, notes, and contacts from a

compatible PC, you must install the Nokia PC Suite software of your phone on the

PC. Use Bluetooth wireless technology, infrared, or a USB data cable for the

synchronization, and start the synchronization from the PC.

Synchronize from a server

To use a remote Internet server, you must subscribe to a synchronization service.

For more information and the settings required for this service, contact your

service provider. You may receive the settings as a configuration message. See

Configuration settings service p. 15 and Configuration p. 85.

If you have saved data on the remote Internet server, to synchronize your phone,

start the synchronization from your phone.

Select Menu > Settings > Connectivity > Data transfer > Server sync. Depending

on the settings, select Initialising sync or Initialising copy.

Synchronizing for the first time or after an interrupted synchronization may take

up to 30 minutes to complete, if the contacts or calendar are full.

USB data cable

You can use the USB data cable to transfer data between the phone and a

compatible PC or a printer supporting PictBridge. You can also use the USB data

cable with Nokia PC Suite.

To activate the phone for data transfer or picture printing, connect the data cable;

when the phone displays USB data cable connected. Select mode., select OK.

Select from the following modes:

Default mode — to use the cable for PC Suite

Printing — to print pictures directly from the phone using a compatible printer

To change the USB mode, select Menu > Settings > Connectivity > USB data

cable > Default mode, or Printing.

■ Call

Select Menu > Settings > Call and from the following options:

Call divert (network service) — to divert your incoming calls. You may not be able

to divert your call, if some call barring functions are active. See Call barring service

in Security p. 86.

Anykey answer > On — to answer an incoming call, briefly press any key, except

the end key, the camera release key and the left and right selection keys

Automatic redial > On — to set your phone to make a maximum of 10 attempts to

connect the call after an unsuccessful call attempt

Speed dialling > On — to activate speed dialing. To set up speed dialing, see Speed

dials’ p. 66. To dial, press and hold the corresponding number key.

Call waiting > Activate — to set the network to notify you of an incoming call

while you have a call in progress (network service). See Call waiting p. 32.

Summary after call > On — to briefly display the approximate duration and cost

(network service) of the call after each call

Send my caller ID > Set by network, Yes or No (network service)

Line for outgoing calls — to select the phone line 1 or 2 to make calls, if supported

by your SIM card (network service)

Slide call handling — to change the slide opening function to answer and end a

call when the slide is opened or closed

■ Phone

Select Menu > Settings > Phone and from the following options:

Language settings — to set the display language of your phone, select Phone

language. If you select Automatic, the phone selects the language according to

the information on the SIM card.

To select the SIM card language, select SIM language.

Memory status — to view the free memory and the used memory in Gallery,

Messaging, Applications, and Bookmarks

Automatic keyguard — to set the keypad of your phone to lock automatically after

a preset time delay when the phone is in the standby mode and no function of the

phone has been used. Select On, and you can set the time from 5 seconds to 60

minutes.

Security keyguard — to set the phone to ask for the security code when you unlock

the keyguard. Enter the security code, and select On.

When the keyguard is on, calls still may be possible to the official emergency number

programmed into your device.

Cell info display > On — to receive information from the network operator

depending on the network cell used (network service)

Welcome note — to enter a welcome note to be shown briefly when the phone is

switched on

Operator selection > Automatic — to set the phone automatically to select one of

the cellular networks available in your area. With Manual, you can select a

network that has a roaming agreement with your home network operator.

Confirm SIM service actions — see SIM services p. 129

Help text activation — to select whether the phone shows help texts

Start-up tone — to select whether the phone plays a start-up tone when the

phone is switched on

■ Enhancements

This menu is shown only if the phone is or has been connected to a compatible

mobile enhancement.

Select Menu > Settings > Enhancements. You can select an enhancement menu if

the corresponding enhancement is, or has been, connected to the phone.

Depending on the enhancement, select from the following options:

Default profile — to select the profile that you want to be automatically activated

when you connect to the selected enhancement

Automatic answer — to set the phone to answer an incoming call automatically

after 5 seconds. If Incoming call alert is set to Beep once or Off, automatic answer

is off.

Lights — to set the lights permanently On. Select Automatic to set the lights on for

15 seconds after a key press.

Text phone > Use text phone > Yes — to use the text phone settings instead of

headset or loopset settings

■ Configuration

You can configure your phone with settings that are required for certain services

to function correctly. The services are browser, multimedia messaging, remote

Internet server synchronization, presence, and e-mail application. Get the settings

from your SIM card, from a service provider as a configuration message, or enter

your personal settings manually. You can store configuration settings from up to

20 service providers in the phone and manage them within this menu.

To save the configuration settings received by a configuration message from a

service provider, see Configuration settings service p. 15.

Select Menu > Settings > Configuration and from the following options:

Default configuration settings — to view the service providers saved in the phone.

Scroll to a service provider, and select Details to view the applications that the

configuration settings of this service provider support. To set the configuration

settings of the service provider as default settings, select Options > Set as default.

To delete configuration settings, select Options > Delete.

Activate default in all applications — to activate the default configuration settings

for supported applications

Preferred access point — to view the saved access points. Scroll to an access point,

and select Options > Details to view the name of the service provider, data bearer,

and packet data access point or GSM dial-up number.

Connect to service provider support — to download the configuration settings

from your service provider

Personal configuration settings — to add new personal accounts for various

services manually, and to activate or delete them. To add a new personal account

if you have not added any, select Add new; otherwise, select Options > Add new.

Select the service type, and select and enter each of the required parameters. The

parameters differ according to the selected service type. To delete or activate a

personal account, scroll to it, and select Options > Delete or Activate.

■ Security

When security features that restrict calls are in use (such as call barring, closed user group

and fixed dialing) calls still may be possible to the official emergency number programmed

into your device.

Select Menu > Settings > Security and from the following options:

PIN code request — to set the phone to ask for your PIN or UPIN code every time

the phone is switched on. Some SIM cards do not allow the code request to be

turned off.

Call barring service — to restrict incoming calls to and outgoing calls from your

phone (network service). A barring password is required.

Fixed dialling — to restrict your outgoing calls to selected phone numbers if this

function is supported by your SIM card

Closed user group — to specify a group of people whom you can call and who can

call you (network service)

Security level > Phone — the phone asks for the security code whenever a new SIM

card is inserted into the phone. Select Memory and the phone asks for the security

code when SIM card memory is selected and you want to change the memory in

use.

Access codes — to set the PIN code or UPIN code in use, or to change the security

code, PIN code, UPIN code, PIN2 code, and barring password

Code in use — to select whether the PIN code or UPIN code should be active

Pin2 code request — to select whether PIN2 code is required when using a specific

phone feature which is covered by the PIN2 code (depends on SIM card)

Authority certificates and User certificates — to view the list of the authority and

user certificates downloaded into your phone. See Certificates p. 127.

Security module settings — See Security module p. 126.

■ Restore factory settings

To reset some of the menu settings to their original values, select Menu >

Settings > Restore factory sett.. Enter the security code. The data you have

entered or downloaded are not deleted, for example, the names and phone

numbers saved in Contacts.

10. Operator menu

This menu lets you access a portal to services provided by your network operator.

The name and the icon depend on the operator. For more information contact your

network operator. If this menu is not shown the following menu numbers change

accordingly.

The operator can update this menu with a service message. For more information,

see Service inbox p. 124.

11. Gallery

In this menu you can manage graphics, images, recordings, video clips,

themes, and tones. These files are arranged in folders.

Your phone supports an activation key system to protect acquired content. Always

check the delivery terms of any content and activation key before acquiring them,

as they may be subject to a fee.

content from being copied, modified, transferred or forwarded.

The files stored in Gallery use a memory that may have a capacity of up to 23 MB

depending on the size of the regional software on your phone.

To see the list of folders, select Menu > Gallery.

To see the available options of a folder, select a folder > Options.

To view the list of files in a folder, select a folder > Open.

To see the available options of a file, select a file > Options.

12. Media

tones), and other content from being copied, modified, transferred, or forwarded.

■ Camera

You can take photos or record video clips with the built-in camera. The camera

produces pictures in JPEG format and video clips in 3GP format.

When taking and using images or video clips, obey all laws and respect local customs as well

as privacy and legitimate rights of others.

Keep a safe distance when using the flash. Do not use the flash on people or animals at close

range. Do not cover the flash while taking a picture.

Camera modes and zoom

To start the camera in the still photo mode

select Menu > Media > Camera.

To start the camera in the video mode

key.

press the camera release key or

, press and hold the camera release

To use the camera, hold the phone in a

horizontal position. Press in this position the

navigation key left or right to change between

still photo and video mode. Press the navigation key up and down, or the volume

keys to zoom in and out.

Take a photo

To take a photo in the select Capture, or press the camera release key. The phone

saves the photo in Gallery > Images. To take another photo, select Back; to send

the photo as a multimedia message, select Send.

To take a self-portrait, turn the camera towards yourself, use the small mirror

besides the camera lens as a view finder, and press the camera release key.

Select Options to set Night mode on if the lighting is dim, Flash on to activate the

camera flash, Self-timer on to activate the selftimer, and Img. sequence on to take

photos in a fast sequence.

Record a video clip

To start the video recording, select Record, or press the camera release key. To

pause the recording, select Pause; to resume the recording, select Continue. To

stop the recording, select Stop. The phone saves the recording in Gallery > Video

clips.

When recording, the camera flash is on with a dimmed light as indicator to others,

that a video is recorded.

Select Options > Mute to prevent the recording of sound.

Camera settings

Select Options >Settings to define image, video and camera parameters:

Image quality — to define the compression rate or quality of the images.

The higher the image quality, the lower the compression rate. Higher image

quality uses more memory space.

Image size — to define the image resolution or size.

Image resolution is expressed by multiplying the number of horizontal dots

(width) by the number of vertical dots (height). The higher the resolution, the

higher the image quality.

Video clip quality — choose high, medium, or low quality. High video clip quality

uses more memory space.

Video clip length — choose Default to restrict the video length to a size that can be

send by MMS, or choose Maximum to allow the available memory to be used for

the video clip.

Camera sounds — when activated, a sound is played when you take a photo, and

when you start the self-timer

Default title — to define the default name for photos or video clips.

Use a predefined title or enter one yourself.

Default mode — Select Standard photo or Video as default mode when the Camera

is activated.

■ Media player

With the media player you can view, play, and download files, such as images,

audio, video, and animated images. You can also view compatible streaming

videos from a network server (network service).

Select Menu > Media > Media player > Open gallery, Bookmarks, Go to address,

or Media downloads.

While streaming audio or video, to rewind (Rew) or fast forward (FF) scroll left or

right. To set the length of a scrolling jump, select FF/Rew interval.

Set up the phone for a streaming service

You may receive the configuration settings required for streaming as a

configuration message from the network operator. See Configuration settings

service p. 15. You can also enter the settings manually. See Configuration p. 85.

To activate the settings, do the following:

1. Select Menu > Media > Media player > Streaming sett..

2. Select Configuration. Only the configurations that support streaming are

shown. Select a service provider, Default, or Personal config. for streaming.

3. Select Account and a streaming service account contained in the active

configuration settings.

■ Music player

Your phone includes a music player for listening to music tracks, recordings, or

other MP3, MP4, or AAC sound files that you have transferred to the phone with

the Nokia Audio Manager application. MP3 and AAC files are stored in the Gallery

folders. Music files stored in the Music files folder and in another location, such as

a folder of the phone memory, are automatically detected and added to the

default track list.

Play music tracks

1. Select Menu > Media > Music player. The details of the first track on the

default track list are shown.

To use the graphical keys

to the desired key, and select it.

2. To play a track, scroll to the track that you want, and select

To adjust the volume level, use the volume keys on the side of the phone.

, or

on the display, scroll left or right

To skip to the beginning of the next track, select

of the previous track, select twice.

To rewind the current track, select and hold

. To skip to the beginning

. To fast forward the current

track, select and hold

. Release the key at the position you want.

3. To stop the playing, select

Warning: Listen to music at a moderate level. Continuous exposure to high

volume may damage your hearing. Do not hold the device near your ear when the

loudspeaker is in use, because the volume may be extremely loud.

Music player options

Select Music player > Options. Some of following features may be available:

Play via bluetooth — to make a connection to an audio enhancement using a

Bluetooth connection

Track list — to view all the tracks available on the track list. To play a track, scroll

to the desired track, and select Play.

Select Options > Refresh all tracks or Change track list to refresh the track list (for

example, after adding new tracks to the list) or to change the track list that is

shown when you open the Music player menu, if several track lists are available in

the phone

Play options > Random > On — to play the tracks in the track list in random order.

Select Repeat > Current track or All tracks to play the current track or the entire

track list repeatedly. Select Music source to change to another folder with music

files.

Media equaliser — to open the list of media equalizer sets. See Equalizer p. 100.

Loudspeaker or Headset — to listen to the music player through the loudspeaker or

a compatible headset connected to the phone

Tip: When using a headset, you can skip to the next track by pressing the

headset key quickly.

Send — to send the selected file using MMS, Bluetooth wireless technology, or an

IR connection

Web page — to connect to a Web address attached to the current file in the track

list

Music downloads — to connect to a browser service related to the current track.

This function is only available when the address of the service is included in the

track.

Memory status — to view the free and used memory capacity

■ Radio

The FM radio depends on an antenna other than the wireless device's antenna. A compatible

headset or enhancement needs to be attached to the device for the FM radio to function

properly.

Warning: Listen to music at a moderate level. Continuous exposure to high

volume may damage your hearing. Do not hold the device near your ear when the

loudspeaker is in use, because the volume may be extremely loud.

Listen to the radio

1. Select Menu > Media > Radio. The channel location number, the name of the

radio channel (if you have saved the channel), and the frequency of the radio

channel are displayed.

To use the graphical keys

, or

on the display, scroll left or

right to the desired key, and select it.

2. If you have already saved radio channels, select

channel you would like to listen to.

or to scroll to the

Tune a radio frequency

1. When the radio is on, select

, or

to change the radio frequency in 0.05

to start the channel search.

MHz steps, or select and hold

Searching stops when a channel is found.

2. To save the channel to a memory location, 1 to 9, press and hold the

corresponding number key.

To save the channel in the memory location from 10 to 20, press briefly 1 or 2,

and press and hold the desired number key 0 to 9.

3. Enter the name of the channel, and select OK.

Basic radio functions

When the radio is on, do the following:

To turn off the radio, select Options > Switch off.

To save the radio channel you have found, select Options > Save station. See Tune

a radio frequency p. 97. You can save up to 20 radio channels.

To set whether the visual radio application is used, select Options > Visual radio.

Some radio channels may send text or graphical information that you can view

using the visual radio application.

To select the options for visual radio, select Options > Visual radio sett.. To set

whether the visual radio application starts automatically when you turn on the

radio, select Enable visual service > Automatically, Manually, or Ask first.

Select Options > Visual radio sett. > Station directory to access a Web site with a

list of radio stations, and if available, their visual radio ID, which you can receive

in your region.

To select the list of saved channels, select Options > Stations. To delete or rename

a channel, or to enter the ID for a visual radio channel, scroll to the desired

channel, and select Options > Delete station, Rename, or Visual service ID.

To listen to the radio in monophonic sound or in stereo, select Options > Mono

output or Stereo output.

To listen to the radio using the loudspeaker or headset, select Options >

Loudspeaker or Headset. Keep the headset connected to the phone. The lead of the

headset functions as the radio antenna.

To enter the frequency of the desired radio channel, select Options > Set

frequency.

You can normally make a call or answer an incoming call while listening to the

radio. During the call, the volume of the radio is muted.

When an application using a packet data connection is sending or receiving data,

it may interfere with the radio.

■ Recorder

You can record pieces of speech, sound, or an active call for up to 60 minutes,

depending on available memory space.

The recorder cannot be used when a data call or packet data connection is active.

Record sound

1. Select Menu > Media > Recorder.

To use the graphical keys,

, or

, on the display, scroll left or right to

the desired key, and select it.

2. To start the recording, select . To start the recording during a call, select

Options > Record. While recording a call, all parties to the call hear a faint

beeping sound about every 2 seconds. When recording a call, hold the phone in

the normal position near to your ear.

3. To end the recording, select

. The recording is saved in Gallery > Recordings.

Options after recording

To listen to the latest recording, select Options > Play last recorded.

To send the last recording using Bluetooth wireless technology or IR, select

Options > Send last recorded.

Select Menu > Media > Recorder > Options > Recordings list. The list of folders in

the Gallery is shown. Open Recordings to see the list with recordings. Select

Options to select options for files in the Gallery. See Gallery p. 89.

■ Equalizer

To control the sound quality when using the music player, amplify or diminish

frequency bands.

Select Menu > Media > Equaliser.

To activate a set, scroll to one of the equalizer sets, and select Activate.

To view, edit, or rename a selected set, select Options > View, Edit, or Rename.

Not all sets can be edited or renamed.

100

13. Push to talk

Select Menu > Push to talk.

Push to talk (PTT) over cellular is a two-way radio service available over a GPRS

cellular network (network service).

You can use PTT to have a conversation with one person or with a group of people

having compatible devices. While you are connected to the PTT service, you can

use the other functions of the phone.

To check availability and costs, and to subscribe to the service, contact your

network operator. Roaming services may be more limited than for normal calls.

Before you can use the PTT service, you must define the required PTT service

settings. See PTT settings p. 107 and Configuration settings p. 108.

■ Push to talk channels

When you call a channel, all members joined to the channel hear the call

simultaneously.

There are different types of PTT channels:

Public group — Every channel member can invite other persons.

Private group — Only persons which receive an invitation by the channel creator

can join in.

Provisioned channel — permanent channel created by the service provider

101

You can set the status of each channel to Default, Listened, or Inactive. Default

and Listened are active channels. When you press the volume up key to make a

channel call, the default channel is called if you have not scrolled to any other

channel or contact.

Add a channel

To add a channel, select Menu > Push to talk > Add channel, and enter the

settings in the form fields:

Channel status: — Select Default to connect to this channel when push to talk is

started, Listened to set the channel active, or Inactive to disable the channel.

Chnl. security: — Select Public group or Private group.

To send an invitation to the channel, select Yes when the phone requests it. You

can send the invitation using a text message or IR.

To add a provisioned channel, select Menu > Push to talk > Add channel >

Options > Edit add. manually. Enter the Channel address: provided by your service

provider.

Receive an invitation

1. When you receive a text message invitation to a channel, Channel invitation

received: is displayed.

2. To view the nickname of the person who sent the invitation and the channel

address if the channel is not a private channel, select View.

3. To add the channel to your phone, select Save.

102

4. To set the status for the channel, select Default, Listened, or Inactive.

To reject the invitation, select Exit > Yes, or select View > Discard > Yes.

■ Switch PTT on and off

To connect to the PTT service, select Menu > Push to talk > Switch PTT on or press

the PTT (volume up) key. indicates the PTT connection.

indicates that the

service is temporarily unavailable. If you have added channels to the phone, you

are automatically joined to the active (Default and Listened) channels, and the

name of the default channel is displayed in the standby mode.

To disconnect from the PTT service, select Switch PTT off.

■ Make and receive a PTT call

Warning: Do not hold the device near your ear when the loudspeaker is in use,

because the volume may be extremely loud.

To make a channel call, a one-to-one call, or a call to multiple recipients, you must

hold the PTT (volume up) key as long as you talk. To listen to the response, release

the PTT (volume up) key. Talking is allowed on a first-come, first-served basis.

When you stop talking, the first person to press the volume up key can talk next.

You may be able to check the login status of your contacts in Menu > Push to

talk > Contacts list. This service depends on your network operator and is only

available for subscribed contacts. To subscribe a contact, select

Options >Subscribe contact, or if one or more contacts are already marked

Subscribe marked.

103

, or

indicates that the person wants not to be disturbed, but can receive callback

requests. indicates that the person has PTT not switched on.

indicate that the person is either available or unknown.

Make a channel call

To make a call to the default channel, press the volume up key. A tone indicates

that the access is granted, and the phone displays your nickname and channel

name.

To make a call to a nondefault channel, select Channel list in the PTT menu, scroll

to the desired channel, and press the volume up key.

Make a one-to-one call

To start a one-to-one call from the list of contacts to which you have added the

PTT address, select Contacts or Menu > Push to talk > Contacts list. Scroll to a

contact, and press the volume up key.

To start a one-to-one call from the list of PTT channels, select Channel list, and

scroll to the desired channel and select Members. Scroll to the desired contact,

and press the volume up key.

To start a one-to-one call from the list of callback requests you have received,

select Callback inbox. Scroll to the desired nickname, and press the volume up key.

104

Make a PTT call to multiple recipients

You can select multiple PTT contacts from the contact list. The recipients receive

an incoming call and need to accept the call in order to participate. If supported

by your network operator, you also may select contacts with a phone number but

without PTT number. For details, contact your network operator.

1. Select Menu > Push to talk > Contacts list, and mark the desired contacts.

2. Press the volume up key briefly to start the call. The participating contacts are

shown on the display, as soon as they join the call.

3. Press and hold the volume up key to talk to them. Release the volume up key to

hear the response.

4. Press the end key to terminate the call.

Receive a PTT call

A short tone notifies you of an incoming PTT call. Informations, such as the

channel, the phone number, or the nickname (network service) of the caller are

displayed.

You can either accept or reject an incoming one-to-one call if you have set the

phone to first notify you of the one-to-one calls.

When you press the volume up key while the caller is talking, you hear a queuing

tone, and Queuing is displayed. Press and hold the volume up key, and wait for the

other person to finish; then you can talk immediately.

105

■ Callback requests

If you make a one-to-one call and do not get a response, you can send a request

for the person to call you back.

Send a callback request

You can send a callback request in the following ways:

To send a callback request from the contacts list in the Push to talk menu, select

Contacts list. Scroll to a contact, and select Options > Send callback.

To send a callback request from Contacts, search for the desired contact, and

select Details. Scroll to the PTT address, and select Options > Send callback.

To send a callback request from the channel list in the PTT menu, select Channel

list, and scroll to the desired channel. Select Members, scroll to the desired

contact, and select Options > Send callback.

To send a callback request from the callback request list in the Push to talk menu,

select Callback inbox. Scroll to a contact, and select Options > Send callback.

Respond to a callback request

When someone sends you a callback request, Callback request received is

displayed in the standby mode.

To open the Callback inbox, select View. The list of nicknames of the persons who

have sent you callback requests is shown.

To make a one-to-one call, select the desired request and press the volume up key.

106

To send a call request back to the sender, select Options > Send callback.

To delete the request, select Delete.

To save a new contact or to add the PTT address to a contact from a received

callback request, select Options > Save as or Add to contact.

■ Add a one-to-one contact

You can save the names of persons to whom you often make one-to-one calls in

the following ways:

To add a PTT address to a name in Contacts, search for the desired contact, select

Details> Options > Add detail > PTT address. A contact will only appear in the PTT

contact list, if the PTT address is entered.

To add a contact to the PTT contacts list, select Menu > Push to talk > Contacts

list > Options > Add contact.

To add a contact from the channel list, connect to the Push to talk service, select

Channel list, and scroll to the desired channel. Select Members, scroll to the

member whose contact information you want to save, and select Options. To add

a new contact, select Save as. To add a PTT address to a name in Contacts, select

Add to contact.

■ PTT settings

Select Menu >Push to talk > PTT settings.

1 to 1 calls > On — to select the phone to allow the reception of incoming one-to-

one calls. To make but not receive one-to-one calls, select Off. The service provider

107

may offer some services that override these settings. To set the phone to first

notify you of incoming one-to-one calls with a ringing tone, select Notify.

Listened channels > On — to activate the listened channels

Show my login status — to enable or disable the sending of the login status

PTT status in startup > Yes or Ask first— to set the phone to automatically connect

to the PTT service when you switch the phone on

Push to talk when abroad — to switch the Push to talk service on or off when the

phone is used outside of the home network

Send my PTT address > No — to hide your PTT address from channel and one-to-

one calls

■ Configuration settings

You may receive the settings for connecting to the service from your service

provider. See Configuration settings service p. 15. You can enter the settings

manually. See Configuration p. 85.

To select the settings for connecting to the service, select Menu > Push to talk >

Config. settings. Select from the following options:

Configuration — to select a service provider, Default, or Personal config. for PTT

service. Only the configurations that support the PTT service are shown.

Account — to select a PTT service account contained in the active configuration

settings

108

Other parameters are PTT user name, Default nickname, PTT password, Domain,

and Server address.

■ Web

Select Menu > Push to talk > Web to access the Internet site of your push to talk

provider.

109

14. Organizer

■ Alarm clock

You can set the phone to alarm at a desired time. Select Menu > Organiser >

Alarm clock.

To set the alarm, select Alarm time, and enter the alarm time. To change the alarm

time when the alarm time is set, select On. To set the phone to alert you on

selected days of the week, select Repeat alarm.

To select the alarm tone or set a radio channel as the alarm tone, select Alarm

tone. If you select the radio as an alarm tone, connect the headset to the phone.

The phone uses the last channel you listened to as the alarm, and the alarm plays

through the loudspeaker. If you remove the headset or switch off the phone, the

default alarm tone replaces the radio.

To set a snooze time-out, select Snooze time-out.

Stop the alarm

The phone sounds an alert tone, and flashes Alarm! and the current time on the

display, even if the phone was switched off. To stop the alarm, select Stop or open

the phone. If you let the phone continue to sound the alarm for a minute or select

Snooze, the alarm stops for the selected snooze time-out and then resumes.

If the alarm time is reached while the device is switched off, the device switches itself on

and starts sounding the alarm tone. If you select Stop, the device asks whether you want to

110

activate the device for calls. Select No to switch off the device or Yes to make and receive

calls. Do not select Yes when wireless phone use may cause interference or danger.

■ Calendar

Select Menu >Organiser > Calendar.

The current day is indicated by a frame. If there are any notes set for the day, the

day is in bold type. To view the day notes, select View. To view a week, select

Options> Week view. To delete all notes in the calendar, select the month or week

view, and select Options > Delete all notes.

Other options for the day view may be Make a note, Delete, Edit, or Move a note;

Copy a note to another day; Send note as text message or multimedia message,

with IR or Bluetooth, or to the calendar of another compatible phone. In Settings

you can set the date and time settings. In Auto-delete notes you can set the phone

to delete old notes automatically after a specified time.

Make a calendar note

Select Menu > Organiser > Calendar. Scroll to the date you want, and select

Options > Make a note and one of the following note types:

Meeting,

Call,

Birthday,

Memo, or

Reminder.

A note alarm

The phone beeps and displays the note. With a call note

on the display, to call

the displayed number, press the call key. To stop the alarm and to view the note,

111

select View. To stop the alarm for approximately 10 minutes, select Snooze. To

stop the alarm without viewing the note, select Exit.

■ To-do list

To save notes for tasks that you must do, select Menu > Organiser > To-do list.

To create a note if no note is added, select Add note; otherwise, select Options >

Add. Write the note, and select the priority, the deadline, and the alarm type for

the note. Then select Save.

To view a note, scroll to it, and select View.

You can also select an option to delete the selected note and delete all the notes

that you have marked as done. You can sort the notes by priority or by deadline,

send a note to another phone as a text message or a multimedia message, with IR

or Bluetooth, save a note as a calendar note, or access the calendar.

While viewing a note, you can also select an option to edit the deadline or priority

for the note or mark the note as done.

■ Notes

To use this application for writing and sending notes, select Menu > Organiser >

Notes. To create a note if no note is added, select Add note; otherwise, select

Options > Make a note. Write a note, and select Save.

Other options for notes include deleting, and editing a note. While editing a note,

you can also exit the text editor without saving the changes. You can send the

note to compatible devices using a text message, a multimedia message, or with

112

IR or Bluetooth. If the note is too long to send as a text message, the phone asks

you to delete the appropriate number of characters from your note.

■ Calculator

The calculator in your phone adds, subtracts, multiplies, divides, calculates the

square and the square root and converts currency values.

Note: This calculator has limited accuracy and is designed for simple calculations.

Select Menu > Organiser > Calculator. When 0 is displayed on the screen, enter

the first number in the calculation. Press the # key for a decimal point. Select

Options >Add, Subtract, Multiply, Divide, Square, Square root, or Change sign.

Enter the second number. For a total, select Equals. Repeat this sequence as many

times as it is necessary. To start a new calculation, first select and hold Clear.

To perform a currency conversion, select Menu > Organiser > Calculator. To save

the exchange rate, select Options > Exchange rate. Select either of the displayed

options. Enter the exchange rate, press the # key for a decimal point, and select

OK. The exchange rate remains in the memory until you replace it with another

one. To perform the currency conversion, enter the amount to be converted, and

select Options > In domestic or In foreign.

Note: When you change base currency, you must enter the new exchange rates

because all previously set exchange rates are cleared.

113

■ Countdown timer

Select Menu > Organiser > Timer. Enter the alarm time in hours, minutes, and

seconds, and select OK. If you wish, write your own note text that is displayed

when the time expires. To start the countdown timer, select Start. To change the

countdown time, select Change time. To stop the timer, select Stop timer.

If the alarm time is reached when the phone is in the standby mode, the phone

sounds a tone and flashes the note text if it is set or Countdown time up. To stop

the alarm, press any key. If no key is pressed, the alarm automatically stops within

60 seconds. To stop the alarm and to delete the note text, select Exit. To restart

the countdown timer, select Restart.

■ Stopwatch

To measure time, take intermediate times, or take lap times, use the stopwatch.

During timing, the other functions of the phone can be used. To set the stopwatch

timing in the background, press the end key.

Using the stopwatch or allowing it to run in the background when using other features

increases the demand on battery power and reduces the battery life.

Select Menu > Organiser > Stopwatch and from the following options:

Split timing — to take intermediate times. To start the time observation, select

Start. Select Split every time that you want to take an intermediate time. To stop

the time observation, select Stop. To save the measured time, select Save. To start

the time observation again, select Options > Start. The new time is added to the

previous time. To reset the time without saving it, select Reset. To set the

stopwatch timing in the background, press the end key.

114

Lap timing — to take lap times. To set the stopwatch timing in the background,

press the end key

Continue — to view the timing that you have set in the background

Show last — to view the most recently measured time if the stopwatch is not reset

View times or Delete times — to view or delete the saved times

115

15. Applications

■ Games

Your phone software includes games.

Launch a game

Select Menu > Applications > Games. Scroll to the desired game, and select Open.

For options related to a game, see Other application options p. 117.

Game downloads

Select Menu > Applications > Options > Downloads > Game downloads. The list

of available bookmarks is shown. To access the list of bookmarks in the Web menu,

see Bookmarks p. 123.

Important: Only install and use applications and other software from sources that

offer adequate security and protection against harmful software.

Game settings

To set sounds, lights, and shakes for the game, select Menu > Applications >

Options > App. settings.

116

■ Collection

Your phone software includes Java applications specially designed for this Nokia

phone.

Launch an application

Select Menu > Applications > Collection. Scroll to an application, and select

Open.

Other application options

Delete — to delete the application or application set from the phone

Details — to view additional information about the application

Update version — to check if a new version of the application is available for

download from Web (network service)

App. access — to restrict the application from accessing the network. Different

categories are shown. Select in each category one of the available permissions.

Web page — to provide further information or additional data for the application

from an Internet page. This feature must be supported by the network. It is only

shown if an Internet address has been provided with the application.

Download an application

Your phone supports J2ME^TMJava applications. Make sure that the application is

compatible with your phone before downloading it.

117

Important: Only install and use applications and other software from sources that

offer adequate security and protection against harmful software.

You can download new Java applications in different ways.

Select Menu > Applications > Options > Downloads > App. downloads. The list of

available bookmarks is shown. Select the appropriate bookmark to connect to the

desired page. For the availability of different services, pricing, and tariffs, contact

your service provider.

Use the game download function. See Game downloads p. 116.

Use the Nokia Application Installer in PC Suite to download the applications to

your phone.

Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does

not warrant or endorse these sites. If you choose to access them, you should take the same

precautions, for security or content, as you would with any Internet site.

118

16. Web

You can access various mobile Internet services with your phone browser.

Important: Use only services that you trust and that offer adequate security and

protection against harmful software.

Check the availability of these network services, pricing, tariffs, and instructions

with your service provider.

With the phone browser you can view the services that use wireless markup

language (WML) or extensible hypertext markup language (XHTML) on their

pages. Appearance may vary due to screen size. You may not be able to view all

details of the Internet pages.

■ Set up browsing

You may receive the configuration settings required for browsing as a

configuration message from the network operator that offers the service that you

want to use. See Configuration settings service p. 15. You can also enter all the

configuration settings manually. See Configuration p. 85.

■ Connect to a service

First, verify that the correct configuration settings of the service that you want to

use are activated.

119

1. To select the settings for connecting to the service, select Menu > Web >

Settings > Configuration settings.

2. Select Configuration. Only the configurations that support browsing service

are shown. Select a service provider, Default, or Personal config. for browsing.

See Set up browsing p. 119.

Select Account and a browsing service account contained in the active

configuration settings.

Select Display terminal window > Yes to perform manual user authentication

for intranet connections.

To make a connection to the service, select Menu > Web > Home; or in the

standby mode, press and hold 0.

To select a bookmark of the service, select Menu > Web > Bookmarks.

To select the last URL, select Menu > Web > Last web address.

To enter the address of the service, select Menu > Web > Go to address, enter the

address of the service, and select OK.

■ Browse pages

After you make a connection to the service, you can start browsing its pages. The

function of the phone keys may vary in different services. Follow the text guides

on the phone display. For more information, contact your service provider.

If packet data is selected as the data bearer,

display during browsing. If you receive a call or a text message, or make a call

during a packet data connection, is shown on the top right of the display to

is shown on the top left of the

120

indicate that the packet data connection is suspended (on hold). After a call the

phone tries to reconnect the packet data connection.

Browse with phone keys

Use the navigation keys to browse through the page.

To select a highlighted item, press the call key, or select Select.

To enter letters and numbers, press the keys, 0 to 9. To enter special characters,

press *.

Options while browsing

In addition to the options available on your device, your service provider may offer

other options.

Direct calling

The browser supports functions that you can access while browsing. You can make

a phone call, and save a name and a phone number from a page.

■ Appearance settings

While browsing, select Options > Other options > Appear. settings; or in the

standby mode, select Menu > Web > Settings > Appearance settings and from

the following options:

Text wrapping > On — to set the text to continue on the next line on the display. If

you select Off, the text is abbreviated

121

Font size to set the font size.

Show images > No — to hide pictures on the page. This can speed up the browsing

of pages that contain a lot of pictures

Alerts > Alert for unsecure connection > Yes — to set the phone to alert when an

encrypted connection changes to unencrypted during browsing

Alerts > Alert for unsecure items > Yes — to set the phone to alert when an

encrypted page contains an unsecure item. These alerts do not guarantee a secure

connection. For more information, see Browser security p. 126.

Character encoding > Content encoding — to select the encoding for the browser

page content

Character encoding > Unicode (UTF-8) web addresses > On — to set the phone to

send a URL as a UTF-8 encoding. You may need this setting when you access a

Web page created in foreign language.

JavaScript > Enable — to allow the execution of Java scripts by the browser

■ Cookies

A cookie is data that a site saves in the cache memory of your phone. Cookies are

saved until you clear the cache memory. See Cache memory p. 125.

While browsing, select Options > Other options > Security > Cookie settings; or in

the standby mode, select Menu > Web > Settings > Security settings > Cookies.

To allow or prevent the phone from receiving cookies, select Allow or Reject.

122

■ Scripts over secure connection

You can select whether to allow the running of scripts from a secure page. The

phone supports WML scripts.

1. While browsing, select Options > Other options > Security settings >

WMLScript sett.; or in the standby mode, select Menu > Web > Settings >

Security settings > WMLScripts over secure connection.

2. To allow the scripts, select Allow.

■ Bookmarks

You can save page addresses as bookmarks in the phone memory.

1. While browsing, select Options > Bookmarks; or in the standby mode, select

Menu > Web > Bookmarks.

2. Select a bookmark; or press the call key to make a connection to the page

associated with the bookmark.

3. Select Options to view, edit, delete, or send the bookmark; create a new

bookmark; or save the bookmark to a folder.

Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does

not warrant or endorse these sites. If you choose to access them, you should take the same

precautions, for security or content, as you would with any Internet site.

123

Receive a bookmark

When you have received a bookmark that is sent as a bookmark, 1 bookmark

received is displayed. To save the bookmark in the bookmark folder, select Show.

To discard the bookmark directly after you have received the bookmark, select Exit

■ Download files

To download more tones, images, games, or applications to your phone (network

service), select Menu > Gallery or Applications > Options >Downloads and from

the available downloads.

Important: Only install and use applications and other software from sources that

offer adequate security and protection against harmful software.

To save all downloaded files automatically in Gallery, select Menu > Web >

Settings > Downloading settings > Automatic saving > On.

■ Service inbox

The phone is able to receive service messages (pushed messages) sent by your

service provider (network service). Service messages are notifications of, for

example, news headlines, and they may contain a text message or an address of a

service.

To access the Service inbox in the standby mode, when you have received a service

message, select Show. If you select Exit, the message is moved to the Service

inbox. To access the Service inbox later, select Menu > Web > Service inbox.

124

To access the Service inbox while browsing, select Options > Other options >

Service inbox. Scroll to the message you want, and to activate the browser and

download the marked content, select Retrieve. To display detailed information on

the service notification or to delete the message, select Options > Details or

Delete.

Service inbox settings

Select Menu > Web > Settings > Service inbox settings.

To set whether you want to receive service message, select Service messages > On

or Off.

To set the phone to receive service messages only from content authors approved

by the service provider, select Message filter > On. To view the list of the approved

content authors, select Trusted channels.

To set the phone to automatically activate the browser from the standby mode

when the phone has received a service message, select Automatic connection >

On. If you select Off, the phone activates the browser only after you select

Retrieve when the phone has received a service message.

■ Cache memory

A cache is a memory location that is used to store data temporarily. If you have tried to

access or have accessed confidential information requiring passwords, empty the cache

after each use. The information or services you have accessed is stored in the cache.

To empty the cache, while browsing, select Options > Other options > Clear the

cache; in the standby mode, select Menu > Web > Clear the cache.

125

■ Browser security

Security features may be required for some services, such as online banking or

shopping. For such connections you need security certificates and possibly a

security module, which may be available on your SIM card. For more information,

contact your service provider.

Security module

The security module improves security services for applications requiring a

browser connection, and allows you to use a digital signature. The security module

may contain certificates as well as private and public keys. The certificates are

saved in the security module by the service provider. See also Access codes p. 14.

Select Menu > Settings > Security > Security module settings and from the

following options:

Security module details — to show the security module title, status, manufacturer,

and serial number

Module PIN request — to set the phone to ask for the module PIN when using

services provided by the security module. Enter the code, and select On. To disable

the module PIN request, select Off.

Change module PIN — to change the module PIN, if allowed by the security

module. Enter the current module PIN code, then the new code twice.

Change signing PIN — to change the signing PIN code for the digital signature.

Select the signing PIN you want to change. Enter the current PIN code, then the

new code twice.

126

Certificates

Important: Even if the use of certificates makes the risks involved in remote

connections and software installation considerably smaller, they must be used

correctly in order to benefit from increased security. The existence of a certificate

does not offer any protection by itself; the certificate manager must contain

correct, authentic, or trusted certificates for increased security to be available.

Certificates have a restricted lifetime. If Expired certificate or Certificate not valid

yet is shown even if the certificate should be valid, check that the current date and

time in your device are correct.

Before changing any certificate settings, you must make sure that you really trust

the owner of the certificate and that the certificate really belongs to the listed

owner.

There are three kinds of certificates: server certificates, authority certificates, and

user certificates. You may receive these certificates from your service provider.

Authority certificates and user certificates may also be saved in the security

module by the service provider.

To view the list of the authority or user certificates downloaded into your phone,

select Menu > Settings > Security > Authority certificates or User certificates.

The security indicator

is displayed during a connection, if the data

transmission between the phone and the content server is encrypted.

The security icon does not indicate that the data transmission between the gateway and the

content server (or place where the requested resource is stored) is secure. The service

provider secures the data transmission between the gateway and the content server.

127

Digital signature

You can make digital signatures with your phone if your SIM card has a security

module. Using the digital signature can be the same as signing your name to a

paper bill, contract, or other document.

To make a digital signature, select a link on a page, for example, the title of the

book you want to buy and its price. The text to sign, which may include the

amount and date, is shown.

Check that the header text is Read and that the digital signature icon

shown.

If the digital signature icon does not appear, there is a security breach, and you

should not enter any personal data such as your signing PIN.

To sign the text, read all of the text first, and select Sign.

The text may not fit within a single screen. Therefore, make sure to scroll through

and read all of the text before signing.

Select the user certificate you want to use. Enter the signing PIN (see Access

codes p. 14), and select OK. The digital signature icon disappears, and the service

may display a confirmation of your purchase.

128

17. SIM services

Your SIM card may provide additional services that you can access. This menu is

shown only if it is supported by your SIM card. The name and contents of the

menu depend on the SIM card.

For availability and information on using SIM card services, contact your SIM card vendor.

This may be the service provider, network operator, or other vendor.

To set the phone to show you the confirmation messages sent between your

phone and the network when you are using the SIM services, select Menu >

Settings > Phone > Confirm SIM service actions >Yes.

Accessing these services may involve sending messages or making a phone call for

which you may be charged.

129

18. PC connectivity

You can send and receive e-mail, and access the Internet when your phone is

connected to a compatible PC through an infrared, Bluetooth wireless technology,

or a USB data cable connection. You can use your phone with a variety of PC

connectivity and data communications applications.

■ PC Suite

With PC Suite you can synchronize Contacts, Calendar, To-do list, and Notes

between your phone, and the compatible PC, or a remote Internet server (network

service).

You may find more information about PC Suite in the support area on the Nokia

Web site at <www.nokia.com/support>.

■ Packet data, HSCSD, and CSD

With your phone you can use the packet data, high-speed circuit switched data

(HSCSD), and circuit switched data (CSD, GSM data).

For availability and subscription to data services, contact your network operator.

The use of HSCSD services consumes the phone battery faster than normal voice

or data calls. You may need to connect the phone to a charger for the duration of

data transfer. See Packet data p. 78.

130

■ Data communication applications

For information on using a data communication application, refer to the

documentation provided with it. Making or answering phone calls during a

computer connection is not recommended, as it might disrupt the operation. For

better performance during data calls, place the phone on a stationary surface with

the keypad facing down. Do not move the phone by holding it in your hand during

a data call.

131

19. Battery information

■ Charging and discharging

Your device is powered by a rechargeable battery. The full performance of a new battery is

achieved only after two or three complete charge and discharge cycles. The battery can be

charged and discharged hundreds of times but it will eventually wear out. When the talk and

standby times are noticeably shorter than normal, replace the battery. Use only Nokia

approved batteries, and recharge your battery only with Nokia approved chargers

designated for this device.

Unplug the charger from the electrical plug and the device when not in use. Do not leave

fully charged battery connected to a charger, since overcharging may shorten its lifetime. If

left unused, a fully charged battery will lose its charge over time.

Use the battery only for its intended purpose. Never use any charger or battery that is

damaged.

Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic

object such as a coin, clip, or pen causes direct connection of the positive (+) and negative (-

) terminals of the battery. (These look like metal strips on the battery.) This might happen, for

example, when you carry a spare battery in your pocket or purse. Short-circuiting the

terminals may damage the battery or the connecting object.

Leaving the battery in hot or cold places, such as in a closed car in summer or winter

conditions, will reduce the capacity and lifetime of the battery and its ability to charge.

Always try to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot

or cold battery may not work temporarily, even when the battery is fully charged. Battery

performance is particularly limited in temperatures well below freezing.

132

Do not dispose of batteries in a fire as they may explode. Batteries may also explode if

damaged. Dispose of batteries according to local regulations. Please recycle when possible.

Do not dispose as household waste.

■ Nokia battery authentication guidelines

Always use original Nokia batteries for your safety. To check that you are getting an original

Nokia battery, purchase it from an authorized Nokia dealer, look for the Nokia Original

Enhancements logo on the packaging and inspect the hologram label using the following

steps:

Successful completion of the four steps is not a total assurance of the authenticity of the

battery. If you have any reason to believe that your battery is not an authentic original Nokia

battery, you should refrain from using it and take it to the nearest authorized Nokia service

point or dealer for assistance. Your authorized Nokia service point or dealer will inspect the

battery for authenticity. If authenticity cannot be verified, return the battery to the place of

purchase.

Authenticate hologram

1. When looking at the hologram label, you should see the Nokia

connecting hands symbol from one angle and the Nokia

Original Enhancements logo when looking from another angle.

133

2. When you angle the hologram left, right, down, and up, you

should see 1, 2, 3, and 4 dots on each side respectively.

3. Scratch the side of the label to reveal a 20-digit code, for

example, 12345678919876543210. Turn the battery so that

the numbers are facing upwards. The 20-digit code reads

starting from the number at the top row followed by the bottom

row.

4. Confirm that the 20-digit code is valid by following the

instructions at www.nokia.com/batterycheck.

To create a text message, enter the 20-digit code, for example,

12345678919876543210, and send to

+44 7786 200276. National and international operator charges

will apply.

You should receive a message indicating whether the code can

be authenticated.

What if your battery is not authentic?

If you cannot confirm that your Nokia battery with the hologram on the label is an authentic

Nokia battery, please do not use the battery. Take it to the nearest authorized Nokia service

point or dealer for assistance. The use of a battery that is not approved by the manufacturer

134

may be dangerous and may result in poor performance and damage to your device and its

enhancements. It may also invalidate any approval or warranty applying to the device.

To find out more about original Nokia batteries, visit www.nokia.com/battery.

135

Care and maintenance

Your device is a product of superior design and craftsmanship and should be treated with

care. The suggestions below will help you protect your warranty coverage.

•

Keep the device dry. Precipitation, humidity and all types of liquids or moisture can

contain minerals that will corrode electronic circuits. If your device does get wet, remove

the battery and allow the device to dry completely before replacing it.

•

Do not use or store the device in dusty, dirty areas. Its moving parts and electronic

components can be damaged.

Do not store the device in hot areas. High temperatures can shorten the life of electronic

devices, damage batteries, and warp or melt certain plastics.

Do not store the device in cold areas. When the device returns to its normal temperature,

moisture can form inside the device and damage electronic circuit boards.

•

Do not attempt to open the device other than as instructed in this guide.

Do not drop, knock, or shake the device. Rough handling can break internal circuit boards

and fine mechanics.

•

Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.

Do not paint the device. Paint can clog the moving parts and prevent proper operation.

Use a soft, clean, dry cloth to clean any lenses (such as camera, proximity sensor, and

light sensor lenses).

•

Use only the supplied or an approved replacement antenna. Unauthorized antennas,

modifications, or attachments could damage the device and may violate regulations

governing radio devices.

Use chargers indoors.

136

•

Always create a backup of data you want to keep (such as contacts and calendar notes)

before sending your device to a service facility.

All of the above suggestions apply equally to your device, battery, charger, or any

enhancement. If any device is not working properly, take it to the nearest authorized service

facility for service.

137

Additional safety information

Your device and its enhancements may contain small parts. Keep them out of the reach of

small children.

■ Operating environment

Remember to follow any special regulations in force in any area, and always switch off your

device when its use is prohibited or when it may cause interference or danger. Use the device

only in its normal operating positions. This device meets RF exposure guidelines when used

either in the normal use position against the ear or when positioned at least 1.5 centimeters

(5/8 inch) from the body. When a carry case, belt clip, or holder is used for body-worn

operation, it should not contain metal and should position the device the above-stated

distance from your body.

To transmit data files or messages, this device requires a good quality connection to the

network. In some cases, transmission of data files or messages may be delayed until such a

connection is available. Ensure that the above separation distance instructions are followed

until the transmission is completed.

Parts of the device are magnetic. Metallic materials may be attracted to the device, and

persons with a hearing aid should not hold the device to the ear with the hearing aid. Do not

place credit cards or other magnetic storage media near the device, because information

stored on them may be erased.

■ Medical devices

Operation of any radio transmitting equipment, including wireless phones, may interfere

with the functionality of inadequately protected medical devices. Consult a physician or the

manufacturer of the medical device to determine if they are adequately shielded from

138

external RF energy or if you have any questions. Switch off your device in health care

facilities when any regulations posted in these areas instruct you to do so. Hospitals or

health care facilities may be using equipment that could be sensitive to external RF energy.

Pacemakers

Pacemaker manufacturers recommend that a minimum separation of 15.3 centimeters

(6 inches) be maintained between a wireless phone and a pacemaker to avoid potential

interference with the pacemaker. These recommendations are consistent with the

independent research by and recommendations of Wireless Technology Research. Persons

with pacemakers should do the following:

•

Always keep the device more than 15.3 centimeters (6 inches) from the pacemaker

Not carry the device in a breast pocket

Hold the device to the ear opposite the pacemaker to minimize the potential for

interference.

If you suspect interference, switch off your device, and move the device away.

Hearing aids

Some digital wireless devices may interfere with some hearing aids. If interference occurs,

consult your service provider.

■ Vehicles

RF signals may affect improperly installed or inadequately shielded electronic systems in

motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock)

braking systems, electronic speed control systems, and air bag systems. For more

information, check with the manufacturer, or its representative, of your vehicle or any

equipment that has been added.

139

Only qualified personnel should service the device, or install the device in a vehicle. Faulty

installation or service may be dangerous and may invalidate any warranty that may apply to

the device. Check regularly that all wireless device equipment in your vehicle is mounted

and operating properly. Do not store or carry flammable liquids, gases, or explosive materials

in the same compartment as the device, its parts, or enhancements. For vehicles equipped

with an air bag, remember that air bags inflate with great force. Do not place objects,

including installed or portable wireless equipment in the area over the air bag or in the air

bag deployment area. If in-vehicle wireless equipment is improperly installed, and the air

bag inflates, serious injury could result.

Using your device while flying in aircraft is prohibited. Switch off your device before

boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to the

operation of the aircraft, disrupt the wireless telephone network, and may be illegal.

■ Potentially explosive environments

Switch off your device when in any area with a potentially explosive atmosphere, and obey

all signs and instructions. Potentially explosive atmospheres include areas where you would

normally be advised to turn off your vehicle engine. Sparks in such areas could cause an

explosion or fire resulting in bodily injury or even death. Switch off the device at refueling

points such as near gas pumps at service stations. Observe restrictions on the use of radio

equipment in fuel depots, storage, and distribution areas; chemical plants; or where blasting

operations are in progress. Areas with a potentially explosive atmosphere are often, but not

always, clearly marked. They include below deck on boats, chemical transfer or storage

facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas

where the air contains chemicals or particles such as grain, dust, or metal powders.

140

■ Emergency calls

Important: Wireless phones, including this device, operate using radio signals,

wireless networks, landline networks, and user-programmed functions. Because of

this, connections in all conditions cannot be guaranteed. You should never rely

solely on any wireless device for essential communications like medical

emergencies.

To make an emergency call:

1. If the device is not on, switch it on. Check for adequate signal strength.

Some networks may require that a valid SIM card is properly inserted in the device.

2. Press the end key as many times as needed to clear the display and ready the device for

calls.

3. Enter the official emergency number for your present location. Emergency numbers vary

by location.

4. Press the call key.

If certain features are in use, you may first need to turn those features off before you can

make an emergency call. If the device is in the offline or flight mode, you must change the

profile to activate the phone function before you can make an emergency call. Consult this

guide or your service provider for more information.

If certain features are in use, you may first need to turn those features off before you can

make an emergency call. Consult this guide or your service provider for more information.

When making an emergency call, give all the necessary information as accurately as

possible. Your wireless device may be the only means of communication at the scene of an

accident. Do not end the call until given permission to do so.

141

■ Certification information (SAR)

This mobile device meets guidelines for exposure to radio waves

Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits

for exposure to radio waves recommended by international guidelines. These guidelines

were developed by the independent scientific organization ICNIRP and include safety

margins designed to assure the protection of all persons, regardless of age and health.

The exposure guidelines for mobile devices employ a unit of measurement known as the

Specific Absorption Rate or SAR. The SAR limit stated in the ICNIRP guidelines is 2.0 watts/

kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR are conducted using

standard operating positions with the device transmitting at its highest certified power level

in all tested frequency bands. The actual SAR level of an operating device can be below the

maximum value because the device is designed to use only the power required to reach the

network. That amount changes depending on a number of factors such as how close you are

to a network base station. The highest SAR value under the ICNIRP guidelines for use of the

device at the ear is 0.84 W/kg.

Use of device accessories and enhancements may result in different SAR values. SAR values

may vary depending on national reporting and testing requirements and the network band.

Additional SAR information may be provided under product information at www.nokia.com.

142

Index

appearance settings ........121

bookmarks ..........................123

browsing pages .................120

cache memory ...................125

certificates .........................127

cookies ................................122

digital signature ...............128

script settings ....................123

security module ................126

set up ...................................119

business cards .............................60

AAC ................................................ 94

access codes ............................... 14

accessories

see enhancements

active standby .....................25, 72

navigation mode ................ 26

alarm clock ................................110

antenna ........................................ 22

applications ...............................117

download ....................16, 117

audio messaging ........................ 42

cache memory ..........................125

calculator ...................................113

calendar ......................................111

call functions ..............................30

call key ..........................................23

call register

barring password ....................... 15

battery ........................................132

authentication ..................133

charge status ...................... 25

charging ......................20, 132

installation .......................... 17

Bluetooth ..................................... 75

bookmarks .................................123

browser .......................................119

see log

call waiting ..................................32

callback request .......................106

calls

143

answer .................................. 31

call waiting .......................... 32

international ....................... 30

make a voice dialing call . 66

making of ............................. 30

options during call ............ 32

recent calls list ................... 68

reject ..................................... 31

speed dialling ...................... 31

camera .......................................... 90

care ..............................................136

certificates ................................127

certification information .......142

character case ............................ 33

charge the battery .................... 20

circuit switched data ..............130

clock settings .......................73, 82

codes

configuration setting service .15

configuration settings ..............21

contact information ..................16

contacts ........................................58

business cards .....................60

copy ........................................59

delete .....................................60

delete contact details .......60

edit details ...........................60

groups ....................................64

my numbers .........................67

my presence .........................61

save an image .....................58

save items ............................58

save names ..........................58

save numbers ......................58

save phone numbers .........58

search ....................................58

service numbers ..................67

settings .................................64

speed dialing .......................66

subscribed names ...............62

voice dialing ........................64

cookies ........................................122

countdown timer .....................114

access .................................... 14

barring password ............... 15

PIN ......................................... 14

PUK ........................................ 14

security ................................. 14

collection ...................................117

configuration .............................. 85

144

counters ....................................... 68

CSD ..............................................130

customer service ........................ 16

IMAP4 ....................................44

POP3 ......................................44

emergency calls ........................141

end call .........................................30

end key ..........................................23

enhancements ............................12

settings .................................84

data cable .................................... 81

data communication ..............130

data transfer

synchronize from PC ......... 81

synchronize from server ... 81

with a compatible device 80

without SIM card ............... 80

date settings ........................73, 82

delete

e-mail .................................... 46

messages .............................. 53

digital signature ......................128

display ........................................... 25

display settings .......................... 72

downloads ................................... 16

applications ......16, 117, 124

content ................................. 16

files ......................................124

equalizer .....................................100

explosive environments .........140

factory settings ..........................87

flash messages ............................41

FM radio .......................................96

folders ....................................38, 43

inbox ...............................43, 46

my folders ............................38

other ......................................46

outbox ...................................43

saved items ...................38, 43

sent items .............................43

font size ........................................72

functions

call ..........................................30

overview ...............................13

EGPRS ........................................... 78

e-mail ........................................... 44

145

availability ............................50

block ......................................51

contacts ................................51

groups ....................................51

private ...........................52

public .............................52

participate in a conversation

gallery ........................................... 89

games ..........................................116

download ...........................116

settings ...............................116

handsfree

see loudspeaker

read ........................................49

reject invitation ..................49

service ...................................47

start session .........................48

unblock .................................51

Internet .......................................119

IR ....................................................77

port .........................................24

hearing aids ..............................139

high-speed circuit switched data

130

HSCSD .........................................130

see instant messaging

IMAP4 ........................................... 44

indicators ..................................... 28

info messages ............................. 53

infrared connection .................. 77

infrared port ................................ 24

installation

battery .................................. 17

SIM card ............................... 17

instant messaging ..................... 46

accept invitation ................ 49

Java applications

see applications

keyguard .......................................29

keypad ...........................................23

keypad lock ..................................29

keys ................................................23

call key ..................................23

146

end key ................................. 23

keyguard ............................... 29

keypad ................................... 23

keypad lock .......................... 29

navigation key .................... 23

power on/off ....................... 24

PTT key .................................. 24

push to talk key .................. 24

selection keys ...............23, 25

volume keys ......................... 24

memory

full ..........................................43

memory in use ....................64

navigation ............................35

scrolling ................................35

message center number ...........36

message settings

e-mail ....................................56

general settings ..................53

MMS ......................................55

multimedia messages .......55

SMS ........................................54

SMS e-mail ..........................54

text messages ......................54

messages

language ...................................... 33

language settings ...................... 83

lights ............................................. 85

list of recordings ........................ 99

location information ................ 69

log .................................................. 68

loudspeaker ................................. 32

delete .....................................53

flash messages ....................41

info messages ......................53

length indicator ..................37

message settings ................53

service commands ..............53

voice messages ...................52

write SMS .............................37

write text message ............37

maintenance .............................136

maintenance service ................. 16

media ............................................ 90

media player ............................... 93

streaming service ............... 93

medical devices ........................138

147

messaging .................................... 36

SMS ....................................... 36

text messages ..................... 36

MMS

GSM .......................................11

name on display .................25

services ..................................11

Nokia contact information ......16

Nokia support .............................16

note alarm .................................111

notes ............................................112

calendar ..............................111

see multimedia messages

modem settings ......................... 78

MP3 ............................................... 94

MP4 ............................................... 94

multimedia messages ............... 38

music player ................................ 94

AAC ........................................ 94

MP3 ....................................... 94

MP4 ....................................... 94

tracks ..................................... 94

my numbers ................................ 67

my presence ................................ 61

one-to-one contact ................107

operator menu ............................88

organizer ....................................110

alarm clock ........................110

calculator ...........................113

calendar ..............................111

calendar note ....................111

countdown timer ..............114

note alarm ..........................111

notes ....................................112

stopwatch ..........................114

to-do list .............................112

overview

names

see contacts

navigation .................................... 35

navigation key ............................ 23

assign functions to ............ 74

navigation mode ........................ 26

network

functions ..............................13

EGSM ..................................... 11

148

positioning ...................................69

power key .....................................24

power saving ...............................27

predictive text input .................33

profiles ..........................................70

PTT ................................................101

call to multiple recipients .....

105

pacemakers ...............................139

packet data ........................78, 130

parts .............................................. 23

PC connectivity ........................130

PC Suite ......................................130

personal shortcuts ..................... 73

phone

care ......................................136

configuration ...................... 85

keys ........................................ 23

maintenance .....................136

open slide ............................. 17

parts ...................................... 23

personalize ........................... 70

settings ................................. 83

phone lock

callback request ................106

channel ...............................101

add ................................102

private .........................101

channel call .......................104

channels

public ...........................101

configuration settings ....108

invitation ............................102

make call ............................103

one-to-one call .................104

one-to-one contact .........107

receive call ...............103, 105

settings ...............................107

switch on/off .....................103

PTT key ..........................................24

see keypad lock

phonebook ................................... 58

photo ............................................. 91

PIN ................................................. 21

PIN codes ..................................... 14

plug and play service ................ 21

POP3 .............................................. 44

Pop-Port ....................................... 24

149

PUK codes .................................... 14

Push to talk

pacemakers ........................139

SAR .......................................142

vehicles ...............................139

SAR ..............................................142

screen saver .................................27

script settings ...........................123

scripts over secure connection ...

123

see PTT

Push to talk key ......................... 24

pushed messages .....................124

radio

visual radio .......................... 97

recent calls list ........................... 68

recorder ........................................ 99

list of recordings ................ 99

record sound ....................... 99

repair service .............................. 16

ringing tones .............. 71, 89, 124

scroll key

see navigation key

security codes .............................14

security module ........................126

security settings .........................86

selection keys .......................23, 25

service commands .....................53

service inbox .............................124

service messages ......................124

service numbers .........................67

services .......................................119

settings .........................................70

Bluetooth ..............................76

camera ..................................92

clock ................................73, 82

configuration .......................85

connectivity .........................75

safety

additional information ...138

certification information

(SAR) ....................................142

emergency calls ................141

explosive environments .140

guidelines ................................9

hearing aids .......................139

medical devices ................138

operating environment ..138

150

data transfer ....................... 79

date .................................73, 82

display ................................... 72

EGPRS .................................... 78

enhancements .................... 84

infrared ................................. 77

IR ............................................ 77

messages .............................. 53

modem settings .................. 78

packet data .......................... 78

personal shortcuts ............. 73

phone settings .................... 83

profiles .................................. 70

PTT ........................................107

PTT configuration .............108

restore factory settings .... 87

service inbox .....................125

shortcuts .............................. 73

standby mode ..................... 72

themes .................................. 71

time ................................73, 82

tones ...................................... 71

USB data cable ................... 81

shared memory .......................... 12

shortcuts ...............................26, 73

in standby mode .................26

navigation key .....................27

personal list .........................26

signal strength ............................25

SIM card

installation ...........................17

SIM services ..............................129

SMS ................................................36

templates ..............................38

SMTP password ..........................57

sound quality ............................100

speed dialing ................ 31, 64, 66

standby mode .............................25

status indicators ........................25

stopwatch ..................................114

strap ...............................................22

streaming service .......................93

subscribed names ......................62

add contacts ........................62

unsubscribe a contact ......63

view contacts ......................63

support ..........................................16

switch on and off .......................21

151

voice commands ........................65

assign function to ..............74

voice dialing

add voice tags .....................65

make a call ...........................66

manage voice tags .............65

voice messages ...........................52

voice tags .....................................65

volume keys .................................24

take a photo ................................ 91

templates ..................................... 38

text

character case .................... 33

predictive text input ......... 33

settings ................................. 33

traditional text input .33, 34

writing .................................. 33

text message ............................... 36

templates ............................. 38

themes .......................................... 71

time settings ........................73, 82

timers ............................................ 68

to-do list ....................................112

tones ............................................. 71

traditional text input ................ 34

wallpaper ..............................71, 72

Web ..............................................119

bookmarks ..........................123

connect ...............................119

wireless markup language .....119

WML ............................................119

wrist strap ....................................22

write text .....................................33

writing language ........................33

unlock keypad ............................. 29

UPIN ................................14, 21, 87

XHTML .........................................119

vehicles .......................................139

video clip ...................................... 91 zoom 90

visual radio .................................. 97

152

Motorola T300p User Manual
Motorola L6 GSM 1800 MHz User Manual
Microsoft Windows 7 Ultimate With Service Pack 1 64 Bit GLC01844 User Manual
LG Electronics LX325 User Manual
Kyocera 2345 User Manual
Intel X18 M User Manual
Gear Head Computer Drive CR6300 User Manual
Black & Decker SDC740B User Manual
Avenview DVI C5 M SET User Manual
Apple MAC PRO 073 1349 REV A User Manual