User Guide
Keys
Retractable
antenna
(pull here to
extend)
Power key
Earpiece
Current
function of
Navi™ key
Screen
Navi™ key
Menu
Scroll keys
Clear key
Voice mail
key
Number keys
Special
characters
key
Case key
Emergency 9 key
Indicators and icons
Active call - A call is in progress.
Alarm - The alarm clock is set.
Keyguard - Keyguard is on. Your phone will
not accept any key presses. To turn it off, press
Unlock, then
.
Letter mode (lower case) - Characters
entered will be lower case letters. To switch to
upper case letter mode, press
to number mode, press and hold
. To switch
.
Letter mode (upper case) - Characters
entered will be upper case letters. To switch to
lower case letter mode, press
.
Number mode - Characters entered will be
numbers. (When entering letters, switch to
number mode by pressing and holding
.)
Roaming - Your phone is roaming outside its
home system.
Silent tones - Tones are set to Silent. (Tones
are turned off.)
Special characters - Highlight a special
character, then press Insert. (While entering
letters, to switch to this mode, press
.)
Text entry (traditional) - The phone is ready
for you to enter text.
Text entry (predictive, lower case) - The
phone is ready for you to enter lower case
letters in the predictive text input mode.
Text entry (predictive, sentence case) - The
phone is ready for you to enter letters in the
predictive text input mode. The first letter of
the first word in each sentence will be upper
case.
Text message - You have one or more new
text messages.
Voice message - You have one or more new
voice messages. To call your voicemail box,
press and hold
.
Contents
1. For your safety
1
FCC/Industry Canada Notice . . . . . . . . . . . . . . 2
Using this Guide . . . . . . . . . . . . . . . . . . . . . . . . 2
2. Battery installation and charging
Attaching the battery . . . . . . . . . . . . . . . . . . . . 3
Battery charging . . . . . . . . . . . . . . . . . . . . . . . . 3
Removing the battery . . . . . . . . . . . . . . . . . . . . 5
Important battery information. . . . . . . . . . . . . 5
3
3. About the phone, keys and menu
Power key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Nokia Navi™ key . . . . . . . . . . . . . . . . . . . . . . . . 6
Start screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Scroll keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Clear key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
External antenna jack. . . . . . . . . . . . . . . . . . . . 7
Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Entering letters and numbers. . . . . . . . . . . . . .11
Special characters in names . . . . . . . . . . . . 12
Special characters in phone numbers . . . . 12
Keyguard (locking the keypad). . . . . . . . . . . . 13
6
4. Basic functions
15
Turning the phone on . . . . . . . . . . . . . . . . . . . 15
Turning the phone off. . . . . . . . . . . . . . . . . . . 15
About the antenna . . . . . . . . . . . . . . . . . . . . . 15
Checking signal strength . . . . . . . . . . . . . . . . 15
Making a call. . . . . . . . . . . . . . . . . . . . . . . . . . 16
Volume adjustment (earpiece) . . . . . . . . . . . . 16
Muting the microphone . . . . . . . . . . . . . . . . . 16
Ending a call . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Last number redial . . . . . . . . . . . . . . . . . . . . . 17
i
Saving a name and number . . . . . . . . . . . . . . 17
Finding a name and number . . . . . . . . . . . . . 17
Answering a call . . . . . . . . . . . . . . . . . . . . . . . 17
Silencing an incoming call . . . . . . . . . . . . . . . 17
5. Phone book
19
Saving names and numbers . . . . . . . . . . . . . . 19
Saving email addresses. . . . . . . . . . . . . . . . . . 19
Finding names and numbers . . . . . . . . . . . . . 20
Editing names and numbers. . . . . . . . . . . . . . 21
Erasing names and numbers. . . . . . . . . . . . . . 21
Finding your own number . . . . . . . . . . . . . . . 21
Scrolling view . . . . . . . . . . . . . . . . . . . . . . . . . 21
Checking available memory . . . . . . . . . . . . . . 21
6. Settings
22
Automatic redial . . . . . . . . . . . . . . . . . . . . . . . 22
Clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Quick alert settings . . . . . . . . . . . . . . . . . . . 25
Voice mailbox number . . . . . . . . . . . . . . . . . . 26
Welcome note . . . . . . . . . . . . . . . . . . . . . . . . . 26
7. Emergency calls
27
Emergency key 9 . . . . . . . . . . . . . . . . . . . . . . . 28
8. Advanced functions 29
Network feature setting . . . . . . . . . . . . . . . . . 29
Adding feature activation codes
to the menu . . . . . . . . . . . . . . . . . . . . . . . . . 29
Adding feature cancellation codes
to the menu . . . . . . . . . . . . . . . . . . . . . . . . . 29
In-call menu . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Making/receiving multiple calls. . . . . . . . . . . 30
ii
Calling cards . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Call forwarding . . . . . . . . . . . . . . . . . . . . . . . . 33
Voice privacy . . . . . . . . . . . . . . . . . . . . . . . . . . 34
1-touch dialing . . . . . . . . . . . . . . . . . . . . . . . . 34
Choosing your phone number
(NAM selection). . . . . . . . . . . . . . . . . . . . . . . . 35
Send own caller ID with next call . . . . . . . . . 36
NAM update . . . . . . . . . . . . . . . . . . . . . . . . . . 36
System selection . . . . . . . . . . . . . . . . . . . . . . . 37
Anykey answer. . . . . . . . . . . . . . . . . . . . . . . . . 39
Automatic answer. . . . . . . . . . . . . . . . . . . . . . 39
Touch tones . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Downloadable ringing tones . . . . . . . . . . . . . 41
Restore factory settings . . . . . . . . . . . . . . . . . 41
9. Call log
42
Missed calls . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Received calls . . . . . . . . . . . . . . . . . . . . . . . . . 43
Dialed calls . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Clearing call lists. . . . . . . . . . . . . . . . . . . . . . . 43
Call timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
10. Voice messages
45
Saving your voice mailbox number . . . . . . . . 45
Listening to new voice messages. . . . . . . . . . 45
Calling your voice mailbox at any time. . . . . 46
11. Mobile messages
47
About mobile messages . . . . . . . . . . . . . . . . . 47
Receiving a mobile message. . . . . . . . . . . . . . 49
Creating, addressing, and sending
a number only message50
Creating a text message. . . . . . . . . . . . . . . . . 51
Addressing a text message. . . . . . . . . . . . . . . 53
Entering text into a message . . . . . . . . . . . . . 54
iii
Sending a message . . . . . . . . . . . . . . . . . . . . . 58
Resending a message . . . . . . . . . . . . . . . . . . . 59
Forwarding a message . . . . . . . . . . . . . . . . . . 59
Erasing messages . . . . . . . . . . . . . . . . . . . . . . 60
12. Extra features
61
Alarm clock . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
13. Security features
63
Access codes overview . . . . . . . . . . . . . . . . . . 63
Lock code . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Security code . . . . . . . . . . . . . . . . . . . . . . . . 63
Restricting calls. . . . . . . . . . . . . . . . . . . . . . . . 63
Phone lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
14. Accessories
68
Nokia Xpress-on™ color covers . . . . . . . . . . . 69
Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Chargers and other accessories . . . . . . . . . . . 72
15. Reference information
76
Important safety information. . . . . . . . . . . . . 76
Emergency calls. . . . . . . . . . . . . . . . . . . . . . . . 78
Radio frequency (RF) signals . . . . . . . . . . . . . 79
Care and maintenance . . . . . . . . . . . . . . . . . . 81
16. Technical information
17. Nokia One-Year Limited Warranty
18. Index
82
83
87
iv
1. For your safety
Read these simple guidelines before using your phone.
Failure to comply with these guidelines may be dangerous
or illegal.
Road Safety Comes First
Don’t use a hand-held phone while driving; park the
vehicle first.
Switch Off In Hospitals
Follow any regulations or rules. Switch phone off near
medical equipment.
Switch Off On Aircraft
Wireless phones can cause interference. Using them on
aircraft is illegal.
Switch Off When Refueling
Don’t use phone at a refueling point. Don’t use near fuel or
chemicals.
Switch Off Near Blasting
Do not use the phone where blasting is in progress.
Observe restrictions, and follow any regulations or rules.
Interference
All wireless phones may get interference which could
affect performance.
Use Sensibly
Use only in the normal position (to ear). Don’t touch the
antenna unnecessarily.
Qualified Service
Only qualified service personnel must install or repair
equipment.
Accessories and Batteries
Use only approved accessories and batteries. Do not
connect incompatible products.
1
FCC/Industry Canada Notice
Your phone may cause TV or radio interference (for example,
when using a telephone in close proximity to receiving
equipment). The FCC or Industry Canada can require you to
stop using your telephone if such interference cannot be
eliminated. If you require assistance, contact your local
service facility.
This device complies with part 15 of the FCC rules. Operation
is subject to the condition that this device does not cause
harmful interference.
Using this Guide
The wireless phone described in this guide is approved for
use in CDMA 1900 networks.
Network services
A number of features included in this guide are called network
services. They are special services provided by wireless service
providers. Before you can take advantage of any of these
network services, you must subscribe to the service(s) from your
home service provider and obtain instructions for their use.
Updates
The latest version of this Owner’s Manual may be found on
2
2. Battery installation and
charging
Before you can use your new phone, you need to attach and
charge the battery.
Attaching the battery
To attach the battery, place it
on the back of the phone as
shown and slide it toward the
top of the phone until it clicks
into place.
Battery charging
Several rechargeable batteries are available for use in your
phone. Note that a new NiMH battery’s full performance is
achieved only after two or three complete charge and
How to charge your battery
Connect the lead from the charger to the bottom of your
phone or to a charging stand. Then plug the charger into a
standard wall outlet.
When the battery is charging, the battery strength indicator
on the right side of the screen scrolls upwards.
Note: When you charge the battery for the first time, the
battery strength indicator will not scroll the entire time; this
is normal.
3
Problems charging
If your phone displays Not charging, charging is suspended.
Check that the battery is connected to an approved charging
device. If the battery is very hot or cold, wait for a while;
charging will automatically resume after the battery is
restored to its normal operating state. If charging still fails,
contact your dealer.
When is charging complete?
When the battery strength indicator stops scrolling,
your phone is considered fully charged. However, a
slight increase in charge may occur if you leave your
phone connected to the charger.
If you charge the battery while the phone is turned
off, the charge bars on the right side of the display will
eventually disappear once a full charge has occurred.
Note: If you are using a lithium ion battery, continue to charge
it for two hours after the indicator has stopped scrolling to
retain “trickle charge”.
When is a good time to charge?
You can charge anytime, but remember that when your phone
displays Battery low, you only have a couple of minutes of
talk time left.
Can I make calls while charging?
Yes, but your battery may not charge during a call. Charging
should resume once you end the call.
Discharging NiMH batteries
For good operation times, discharge NiMH batteries from time
to time by leaving your phone switched on until it turns itself
off (or by using the battery discharge facility of any approved
accessory available for your phone). Do not attempt to
discharge the battery by any other means.
4
Removing the battery
Note: Switch off the phone before removing the battery!
1
Press and hold the
button at the top of the
battery.
2
3
Slide the battery toward
the bottom of the phone.
Lift the battery off the
phone.
Important battery information
•
The battery can be charged and discharged hundreds of times
but it will eventually wear out. When the operating time (talk
time and standby time) is noticeably shorter than normal, it is
time to buy a new battery.
•
Use only batteries approved by the phone manufacturer and
recharge your battery only with the chargers approved by the
manufacturer. When a charger is not in use, disconnect it from the
power source. Do not leave the battery connected to a charger for
longer than a week, since overcharging may shorten its life. If left
unused a fully charged battery will discharge itself over time.
•
Temperature extremes will affect the ability of your battery to
charge: allow it to cool down or warm up first.
•
•
•
Use the battery only for its intended purpose.
Never use any charger or battery which is damaged or worn out.
Do not short circuit the battery. Accidental short circuiting can
occur when a metallic object (coin, clip, or pen) causes direct
connection of the + and - terminals of the battery (metal strips
on the back of the battery), for example when you carry a spare
battery in your pocket or purse. Short circuiting the terminals
may damage the battery or the connecting object.
•
Leaving the battery in hot or cold places, such as in a closed car
in summer or winter conditions, will reduce the capacity and
lifetime of the battery. Always try to keep the battery between
59º F and 77º F (15º C and 25º C). A phone with a hot or cold
battery may temporarily not work, even when the battery is fully
charged. NiMH batteries’ performance is particularly limited in
temperatures below 14º F (-10º C). Li-Ion batteries’ performance
is particularly limited in temperatures below 32º F (0º C).
•
•
Do not dispose of batteries in a fire!
Dispose of used batteries in accordance with any local regulations.
5
3. About the phone, keys and
menu
Power key
You can use the power key
to:
•
•
•
turn the phone on or off (press and hold)
turn the phone’s lights on for 30 seconds
off and the phone is not connected to a headset or other
handsfree device.)
For more information on Keyguard, see ‘Keyguard (locking
Nokia Navi™ key
Your phone’s Navi™ key
appears
below the screen. Its current function
is indicated by the word that appears
above it (for example, Menu). Simply
press the Navi™ key to perform the
function.
Throughout this guide, when you see “press Menu,” “press
Listen,” etc., press the Navi™ key when that word appears
above it.
Start screen
The start screen appears when you first
turn on your phone. Menu appears above
the Navi™ key so you can access your
phone’s menu. Several features can be
used only when the phone is at the
start screen.
To get to the start screen, press and hold
(If there are characters on the screen this clears the characters,
then you must press and hold again.)
for a second.
6
Scroll keys
The scroll keys
are located to the right of the
Navi™ key. Use the scroll keys to:
•
•
•
•
•
browse menus
adjust the earpiece volume while in a call
access your phone book (press
access the dialed calls list (press
from the start screen)
from the start screen)
For more information about the start screen, see ‘Menu’ on
Clear key
Use the clear key
to:
•
•
•
•
•
delete a character to the left of the cursor
clear all characters from the screen (press and hold)
return to the previous menu level
return from the menu to the start screen (press and hold)
access the in-call menu while in a call (see ‘In-call menu’
Lights
To turn your phone’s lights on for 30 seconds:
•
•
if Keyguard is off, press any key
if Keyguard is on, press the
key briefly
For information about controlling your phone’s lights when
the phone is connected to a handsfree device, see page 23.
External antenna jack
At the back of the phone, below the antenna, there is a con-
nector for an external antenna. The connector may be protected
by a rubber cap. Remove the cap before connecting an external
antenna. After removing the antenna, replace the cap.
Warning: Keep the cap out of the reach of small children.
7
Menu
Using your phone’s menu you can easily access the many
powerful features in your phone.
Scroll bar
When you use your phone’s menu, a scroll bar
appears at the far right of the screen. This bar
indicates where you are in the menu; each tab
location on the bar represents a different menu
item.
For example, press Menu once. The scroll bar appears with
the first (top) tab displayed. A different tab appears each
time you press
or
.
Help text
Many menu items have brief help text. To view the help text,
scroll to the menu item and wait for approximately 10 seconds
for the text to appear. Press More or
to see the next
page of text,
to see the previous page, or to
return to the menu.
8
Menu shortcuts
When you select a menu item, numbers appear on
the screen above the scroll bar. If you become
familiar with these numbers, you can use them as
shortcuts for accessing different menu items. For
example, to access the Phone settings menu, you
can simply press Menu 4 2. The phone displays the first item
in that menu, Touch tones.
Note: (1) Menu items in your phone vary depending on the
network and accessories used. (2) This is not a complete list;
see entries about individual features for more information.
1 Phone book
11 Search
12 Add new
13 Edit
3 Call log
31 Missed calls
32 Received calls
33 Dialed calls
34 Clear call lists
14 E-mail
341 All
15 Options
342 Missed
343 Received
344 Dialed
151 Scrolling view
152 Memory status
16 1-touch dialing
35 Call timers
17 Erase
351 Last call
352 All calls
353 Life timer
354 Clear timers
171 One by one
172 Erase all
18 Own number
2 Messages
21 Text messages
211 Write newO
212 Inbox
213 OutboxO
214 Saved
215 Erase
22 Voice messages
221 Listen to voice
messages
222 Voice mailbox
number
23 Welcome note
9
4 Settings
7 Clock
71 Alarm clock
41 Call settings
411 Emergency key 9
412 Automatic redial
72 Clock settings
721 Display/Hide clock
722 Time settings
723 Time format
413 Calling card
414 Automatic answerA
415 Anykey answer
8 Tones
42 Phone settings
421 Touch tones
422 Restore factory settings
423 Language
81 Ringing options
811 Ring
812 Ascending
813 Ring once
814 Beep once
815 Silent
424 LightsA
43 Security settings
431 Restrict calls
432 Access codes
82 Ringing tone
44 Network services
83 Ringing volume
441 Voice privacyO
442 Call forwardingM
443 Call waitingM
831 Level 1
832 Level 2
833 Level 3
834 Level 4
835 Level 5
444 Send caller IDM
445 Network feature setting
446 NAM selection
447 NAM updateO
84 Message alert tone
841 No tone
842 Standard
843 Special
844 Beep once
845 Long & loud
5 System
(Depends on service provider; any
of the following items may appear.)
<carrier’s name>
Automatic
Automatic A
Automatic B
Home only
Analog
85 Keypad tones
851 Off
852 Level 1
853 Level 2
854 Level 3
86 Warning and game
tones
861 On
862 Off
6 Games
61 Memory
62 Snake
63 Logic
9 Keyguard
A
Depends on accessory; see entry for this feature
M
Must be added to the menu manually; see ‘Network feature setting’
O
Depends on network or operator
10
Entering letters and numbers
Cursor
The cursor is a blinking vertical line that appears on the
screen when you are entering text or numbers. Characters
you enter appear to the right of the cursor. Press
delete the character to the left of the cursor. Use
to move the cursor to the right or left.
to
and
ABC mode
When your phone is ready for you to enter text, such as a
name or message, it switches to ABC mode. The
shows that it is in ABC mode.
icon
When
is displayed, you can enter these characters by
pressing the indicated key repeatedly:
Key
1
Characters
. , ‘ ? ! - 1
ABC2
Key
7
Characters
PQRS7
2
8
TUV8
3
DEF3
9
WXYZ9
space, 0
4
GHI4
0
5
JKL5
See ‘Special
characters in
6
MNO6
Changes letter case,
switches between
letters and numbers
Note: After you enter a character, press down on the scroll
key to move the cursor over quickly.
11
Changing letter case
Press the
key (the Case key, shown on the phone diagram
on this guide’s inside front cover) to switch between upper-
and lower-case letters. The
icon switches to
to
indicate that you are using lower case.
Entering numbers
To enter numbers while in ABC mode, you can:
•
press and hold the corresponding key until the number
appears, or
•
switch between ABC mode and number mode by pressing
and holding
.
Special characters in names
In ABC mode you can press
(the Special characters key,
shown on the phone diagram on this guide’s inside front cover)
to view the special characters below. You can use these
characters when saving names in your phone book. Simply
press
or
to highlight the one you want, then press
Use.
. , ? @ ! : ; - + # * ( ) ‘ “ _ & $ £ % / > ¿ ¡ § = [ ] ¥
Tip: To choose a character that appears near the end
of the list, immediately press
to go to the end of
the list.
Special characters in phone numbers
You can use special characters to dial or save phone numbers
of automated services such as bank account information.
When entering numbers, press
the character you want.
repeatedly until you see
Character
Use
*
This character is used to request services
from the network. Contact your service
provider for details.
+
This character is not currently used.
12
Character
p
Use
This character creates a pause. Digits to the
right of the p are sent as touch tones after a
2.5-second pause.
Use this character to save phone numbers of
automated services that require you to enter
a password or other information after the
call is answered. For example, if your voice
mail number at work is 555-1212 and you
need to enter your extension (1234) and
then a password (5678) in order to listen to
your messages, you could save this phone
number as 5551212p1234p5678.
w
This character creates a wait. It works
similarly to the pause character except that
digits to the right of the w are not sent until
you press Send.
Keyguard (locking the keypad)
Using the Keyguard feature you can
“lock” your phone’s keypad so that
accidental keypresses have no effect.
This is handy when your phone is in a
pocket or purse.
Note: Keyguard is not a security feature and will not prevent
unauthorized use of your phone.
To lock the keys
Press Menu 9 or Menu
.
To unlock the keys
Press Unlock
.
13
Notes about Keyguard
•
When Keyguard is on, the only way to answer a call is to
press Answer. Once the call is terminated, keyguard is
reactivated.
•
•
When Keyguard is on, press the power key briefly to turn
your phone’s lights on for 30 seconds.
When Keyguard is on, calls may be possible to the emergency
number programmed into your phone (e.g. 911 or other
official emergency number). However, one-key emergency
dialing (‘the 9 key’) does not operate.
Note: When Keyguard is active, the only way to make an
emergency call is to dial the emergency number, then
press Call.
•
Keyguard is automatically turned off when the phone
is connected to a handsfree device. Once the phone is
disconnected from the handsfree device, keyguard is
reactivated.
14
4. Basic functions
Turning the phone on
Press and hold
for one second.
Note: Pressing
briefly turns your phone’s lights on for
fifteen seconds.
If the phone asks for a lock code, see ‘Lock code’ on page 63.
If the phone asks for a security code, see ‘Security code’ on
WARNING! Do not switch on the phone when wireless phone
use is prohibited or when it may cause interference or danger.
Turning the phone off
If Keyguard is off, press and hold
for one second.
.
To deactivate Keyguard, press Unlock
About the antenna
Your Nokia phone has a retractable antenna. For best
performance, fully extend the antenna during use.
Normal position
Hold the phone as you would any other telephone, with the
antenna pointed up and over your shoulder.
Tips on efficient operation
As with any other radio transmitting device, do not touch
the antenna unnecessarily when the phone is switched on.
Contact with the antenna affects call quality and may cause
the phone to operate at a higher power level than otherwise
needed.
Checking signal strength
Your phone operates on radio waves. Radio signal coverage
is maintained by a wireless network, and the quality of calls
on your phone depends on the strength of the wireless radio
signal.
15
Get a strong signal
When you are at the start screen or in a call, the
strength of the radio signal is indicated by the
signal strength indicator on the left side of your
phone’s screen. This indicator scrolls up and down
as the signal strength increases and decreases.
To improve your phone’s reception, try moving your phone
slightly. If you’re inside a building, move toward a window.
Making a call
1
Enter the area code and phone
number. (Menu changes to Call.)
2
Press Call and wait for the other
party to answer.
Volume adjustment (earpiece)
To adjust the earpiece volume, press
or
during a call.
If an accessory with its own loudspeaker is connected to your
phone, the scroll keys adjust the volume for that accessory.
Muting the microphone
When you are in a call, you can mute the phone’s microphone
by pressing
, pressing Options, and selecting Mute. To
unmute the microphone, press
, press Options, and
select Unmute.
For more information, see ‘In-call menu’ on page 29.
Ending a call
Press End. During the call, if you entered any characters
(for example, if you entered a few numbers to communicate
with an automated attendant), the characters will remain
on the screen. To clear them, press and hold
.
16
Last number redial
The last 10 numbers you dialed are stored in the dialed calls
list. Use this list to redial a number you have called recently.
1
From the start screen, press
calls list.
to access the dialed
2
3
Scroll to the desired number.
Press Call.
Saving a name and number
Finding a name and number
1
2
Press
to access your phone book.
Scroll to the number you want. (To skip ahead quickly in
the list, press the number key that corresponds to the
first letter of the name. For example, if you want to call
your friend Katy, press the 5 key twice, quickly; once for
the letter j, and once for the letter k.)
3
Press Call.
For other ways to find names and numbers, see ‘Finding
Answering a call
When someone calls, the phone alerts you (see ‘Tones’ on
press any key except
.
Silencing an incoming call
To silence the ringing of the incoming call, press
briefly.
You can still answer the call if Call or the name of the person
is still flashing on your screen.
Note: To prevent accidental answering when the phone is in
a pocket or purse, the phone will not answer the call if you
press the key for longer than one second.
For information on setting your phone to answer incoming
17
Caller ID
Caller ID is a network service that displays the phone number
of the person calling you, if it is available. Check with your
service provider for details.
If the caller can be identified, the phone
displays the caller's phone number and
calling. If the number matches a name
saved in your phone book, the name is
displayed instead. However, if the last
seven digits of the phone number match more than one name
in the phone book, only the phone number is displayed.
18
5. Phone book
For convenient and easy dialing, you can save 99 phone
numbers and associated names in your phone.
Saving names and numbers
Saving a name and number is easy!
Just enter the phone number, press
or
, then press Save. Enter a
name if you wish, then press OK.
Saving a number quickly
To save a number quickly, enter the phone number, press
or
, then press and hold Save. The number is saved
to your phone book and you can add a name to it later
Saving a name and number while in a call
To save a name and number while in a call, press Options,
scroll to Phone book, scroll to Add new, enter a number and
name if you like, and press OK.
Notes about saving names
•
A name may appear only once in memory. If you try to
save a name that already exists in memory, the phone
asks if you want to replace the existing name.
•
If you try to save a phone number and your phone book
is full, you are given the option to replace an existing
entry. Scroll to the entry you want to replace and press
OK, or press
to cancel.
Saving email addresses
You can associate an email address with each entry in your
phone book. Later, when addressing a text message, you can
quickly enter the email address by selecting a name in your
phone book. (The ability to send a text message depends on
the arrangement you make with your service provider.)
19
To save an email address, press Menu 1 4 (Phone book -
E-mail). Press Select. Scroll to a phone book entry. Press
Edit e-mail. Enter the email address, then press OK.
The presence of an email symbol (@) in the top right corner
of the screen indicates that an email address is associated
with the selected entry.
Finding names and numbers
There are several ways to find names and numbers in your
phone book.
From the start screen
Press
to access your phone book, then scroll to the desired
name/number.
Tip: You can also press the number key that corresponds
to the first letter of the name. (To skip ahead quickly
in the list, press the number key that corresponds to
the first letter of the name. For example, if you want
to call your friend Katy, press the 5 key twice, quickly;
once for the letter j, and once for the letter k.) The first
matching entry is displayed at the top of the screen.
Using the Phone book menu
Press Menu 1 1, enter the first few
letters of the name, then press OK.
Your phone displays the first matching
entry at the top of the screen.
While performing other functions
Say you want to forward your phone
calls to a number that is saved in your
phone book. When you are prompted
to enter the phone number, you can
find it instead—simply press Search to
access your phone book.
20
Editing names and numbers
To edit phone book entries, press Menu 1 3, scroll to the
entry you want to edit, then press Edit. Edit the name and
number as needed.
Erasing names and numbers
Use Menu 1 7 to erase entries from your phone book. One
by one lets you select one entry at a time to be erased.
Erase all erases your entire phone book (you are required
to enter your security code first).
Finding your own number
Use Menu 1 8 to view your phone’s number.
Scrolling view
Use Menu 1 5 1 to choose a scrolling view for your phone
book (Name list, Name+number, or Name only).
Tip: If you’re viewing your phone book and scrolling
view is set to Name list or Name only, you can view
the phone number associated with a name by pressing
and holding
.
Checking available memory
Use Menu 1 5 2 to see how many memory locations are free
and how many are being used. (Each memory location holds
one phone number and associated name.)
21
6. Settings
This section describes some phone settings that allow you to
customize your phone to suit your preferences and that you
probably won’t change very often.
Automatic redial
Use Menu 4 1 2 to turn this feature on or off. When this
feature is on and the wireless network is busy, your phone
redials a number up to three times. This feature does not
redial to a busy phone number.
To stop the call attempts, press Quit or
.
Clock
Your phone has an internal clock that
can be displayed on the start screen.
If you remove the battery for longer
than a couple of seconds, the time is
lost. The next time you turn on the
phone, you will be asked to enter the time.
Setting the time using the network
To set the time on your phone using the network (the default
setting), use Menu 7 2 2 1. If your phone is unable to get the
time from the network, you are prompted to enter the time
manually. (For example, your phone may not be able to get
the time from the network if you don’t have digital coverage.)
Setting the time manually
Use Menu 7 2 2 2 to enter the current time. Use two digits
for both hours and minutes (for example, enter 1:30 as
0130). If the clock’s time format is set to am/pm, you are
asked to choose am or pm.
Note: Pressing
does not work on this screen. If you
make a mistake, re-enter all four digits.
22
Selecting time format
Use Menu 7 2 3 to set the clock’s format to am/pm or
24-hour.
Displaying or hiding the clock
Press Menu 7 2 1 to display the clock on the phone’s screen
if it is currently hidden, or vice versa.
When the clock is displayed and the time
(a.m.)
(p.m.)
03:15
03:15
format is set to am/pm, a black square
appears next to the time indicating
a.m. or p.m.
Language
Use Menu 4 2 3 to set the language
of your phone’s screen. You can
choose from English, French,
Spanish, Portuguese, and Hebrew.
The shortcut for choosing English is to
press Menu 4 2 3 1.
Lights
If you’re using your phone with a handsfree device, your phone’s
lights turn on and remain on automatically. Use Menu 4 2 4 to
set your phone’s lights to Automatic (after 30 seconds, the
lights turn off until the next key is pressed, phone rings, etc.).
For information about turning your phone’s lights on at any
time, see page 7.
Tones
Use Menu 8, Tones, to change the six sound settings in your
phone: ringing option, ringing tone, ringing volume, message
alert tone, keypad tones, and warning and game tones.
select a fixed combination of these settings to suit your
current environment.
23
Ringing option
Use Menu 8 1 to tell your phone how to notify you that you
have a call.
Note: If you choose Beep once or Silent, the alarm clock
only sounds a quiet beep.
Ring The phone rings normally using the currently selected
ringing tone.
Ascending The phone rings using the currently selected
ringing tone. The ringing volume starts low and increases to
selected volume with successive rings.
Ring once The phone rings once using the currently selected
ringing tone.
Beep once The phone beeps once.
Silent The phone makes no sound when you receive a call.
The
icon appears on the start screen.
Ringing tone
If your ringing option is set to Ring once, your phone plays a
ringing tone when someone calls you. Use Menu 8 2 to choose
one of 40 ringing tones. Scroll to a tone to hear how it sounds.
Note: If the ringing option is set to Silent or Beep once, the
phone won’t play sample tones.
Ringing volume
Use Menu 8 3 to control the volume of
your phone’s ringing and of message
alert tones.
Message alert tone
Use Menu 8 4 to choose the tone played when you receive a
mobile message. Scroll to a tone to hear how it sounds.
Keypad tones
Use Menu 8 5 to adjust the volume of the tones your phone
makes when you press its keys.
24
Warning and game tones
Use Menu 8 6 to turn your phone’s warning and game tones
on or off. Warning tones are created by events such as
confirmations, errors, power on, battery low, and recharge
battery.
Vibrating alert
If a vibrating battery is attached to your phone, it will vibrate
when you receive a voice call, even if the ringing option is
set to Silent.
Note: The battery does not vibrate while your phone is connected
to (or placed in) a charging device or connected to a handsfree
device.
Quick alert settings
You can quickly adjust your phone’s
sound settings when you go into a
meeting, go outdoors, etc. To choose
a quick alert setting, briefly press
scroll to the setting you want, then
press OK.
,
Note: You can only access your phone’s quick alert settings
from the start screen.
Tip: Instead of using the scroll keys, you can press
repeatedly to scroll through this menu. After you reach
the setting you want, press and hold
.
Note: If you choose Silent or Quiet, the alarm clock only
sounds a quiet beep.
Normal Your phone uses the settings you made in Menu 8,
Tones.
Silent All sound is turned off in your phone. The
icon
appears on the start screen.
Quiet Your phone beeps once when you receive a call or
mobile message. Other tones are turned off.
Loud Your phone rings loudly. Keypad tones, message alert
tone, and warning tones are also loud.
25
Headset Your phone automatically selects this when it is
connected to a headset. Your phone remembers any changes
you make to settings in Menu 8, Tones, and uses them the
next time you connect the phone to a headset.
Handsfree Your phone automatically selects this when it is
connected to a handsfree device. Your phone remembers any
changes you make to settings in Menu 8, Tones, and uses them
the next time you connect the phone to the device.
Note: If the Silent, Quiet, or Loud quick alert setting is chosen
and you change a setting in Menu 8, Tones, your phone switches
the current quick alert setting to Normal.
To return to the start screen, press
.
Voice mailbox number
If you have a voice mail subscription, use Menu 2 2 2 to save
the voice mailbox number given to you by your service provider.
This number may be up to 32 digits long. Once you save
your voice mailbox number, you can press and hold
3 seconds to dial your voice mailbox. (You can also press
briefly and then press Call.)
for
For any questions about your voice mail, contact your
service provider.
Welcome note
Use Menu 2 3 to create or change the
welcome note for your phone. This note
is displayed briefly each time you turn
on your phone. It can be your name, a
reminder, etc. To save the note, press
Options, then Save. To erase the note, press Options,
then Erase.
26
7. Emergency calls
1
If the phone is not on, switch it on.
2
Press and hold
phone for calls.
for several seconds to ready the
3
4
Key in the emergency number for your present location
(e.g. 911 or other official emergency number). Emergency
numbers vary by location.
Press Call.
IMPORTANT!
This phone, like any wireless phone, operates using radio signals,
wireless and landline networks as well as user-programmed
functions which cannot guarantee connection in all conditions.
Therefore you should never rely solely upon any wireless phone
for essential communications (e.g. medical emergencies).
If you make an emergency call, your phone changes to
emergency call mode. If you choose to exit this mode, emergency
operators may not be able to contact you. Keep your phone in
emergency call mode until emergency personnel arrive on the
scene. In emergency call mode, some menu items may not be
available. To exit emergency call mode, at the Start screen,
press Exit. When the question Restore normal service?appears,
click OK.
Remember, to make or receive any calls the phone must be
switched on and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless phone
networks or when certain network services and/or phone
features are in use. Check with local service providers.
If certain features are in use (Keyguard, call restrictions, etc.),
you may first need to turn those features off before you can
make an emergency call. Consult this document and your local
cellular service provider.
When making an emergency call, remember to give all the
necessary information as accurately as possible. Remember that
your wireless phone may be the only means of communication
at the scene of an accident - do not cut off the call until given
permission to do so.
27
Emergency key 9
Use Menu 4 1 1 to turn on this feature. When this feature is
on, the phone attempts to make an emergency call when you:
•
•
press and hold the 9 key, or
press 9, then press Call.
Note: When Keyguard is active, the only way to make an
emergency call is to dial the emergency number, then
press Call.
IMPORTANT!
Official emergency numbers (for example, 911) vary by location.
Only one number is dialed automatically by Emergency Key 9,
and it might not be the proper number in all circumstances.
28
8. Advanced functions
Network feature setting
Call forwarding, call waiting, and send own caller ID with next
call are network services available through your service provider.
These features do not appear in your phone’s Network
services menu until you save the related feature code(s) given
to you by your service provider. After you save the feature
activation or cancellation code, the feature appears in the
phone’s menu and you can use the menu to turn the feature
on or off.
Note: Feature codes can be saved only when your primary
phone number (NAM 1) is selected. See page 35.
Adding feature activation codes to the menu
To save a feature activation code, press Menu 4 4 5. At the
Feature code: prompt, enter the feature activation code,
then press OK. Scroll to the feature that the code applies to,
then press Select. (If the feature is call forwarding, choose
one of the four types of call forwarding.) Finally, scroll to
Activate, then press OK.
Activate now appears in the menu for that feature.
Adding feature cancellation codes to the menu
To save a feature cancellation code, press Menu 4 4 5. At the
Feature code: prompt, enter the feature cancellation code,
then press OK. Scroll to the feature that the code applies to,
then press Select. (If the feature is call forwarding, choose one
of the four types of call forwarding.) Finally, scroll to Cancel,
then press OK.
Cancel now appears in the menu for that feature.
In-call menu
When you are in a single call, the Navi™ key function is End.
However, you can use your phone’s in-call menu to perform
several functions while in a call. To access the in-call menu,
press
to change the Navi™ key function to Options,
then press Options.
29
Note: If you have an active call and an incoming or held call,
pressing isn’t necessary; Optionsappears automatically.
If you receive a call while in a call, the Navi™ key function
changes to Answer.
Depending on the number of active calls and whether you are
using digital or analog mode, the following in-call options
may be available:
Mute/End
mute
mute/unmute the phone’s microphone
Flash
switch between calls/answer waiting call/
make new call
End
end all calls
Touch tones send touch tones
Menu
access your phone’s menu
Phone book access the phone book
Making/receiving multiple calls
Note: The following two features might not be supported in
your network. Contact your service provider for details.
Making a new outgoing call
Type in the phone number you wish to call and press Options
to access the in-call menu. Then, press Flash. The first call is
automatically put on hold. To join the calls, press Flash again.
Receiving a new call
If you are in a call and you receive a call, press Answer. The
first call is automatically put on hold. To swap between the
calls, press Flash.
Ending all calls
Select End from the in-call menu.
30
Call waiting
Call waiting is a network service that allows you to receive
an incoming call when you’re already in a call. Contact your
service provider for details.
Answering a waiting call
When you receive a call while already in a call, the Navi™
key function changes from End to Answer. Press Answer to
answer the waiting call. The call you were in is put on hold,
and the Navi™ key function changes to Options. To switch
between calls, or to end all calls, press Options to access
your phone’s in-call menu.
For complete information on your phone’s in-call menu, see
Cancelling call waiting: normal method
To cancel call waiting before making a call, you must get the
call waiting cancellation code from your service provider.
1
2
Dial the code for cancelling call waiting (for example, *810).
Press Call.
Cancelling call waiting: menu method
You can save the code for cancelling call waiting given by your
service provider and then use Menu 4 4 2 2 to cancel call
Calling cards
If you wish to use a calling card for
long distance calls, you must first save
your calling card information into your
phone. Your phone can save information
about four calling cards.
Saving calling card information
1
Press Menu 4 1 3.
2
Scroll to the desired calling card, then press Options.
31
3
4
5
Scroll to Edit, then press OK.
At Dialing sequence, press Select. Press
to choose
the dialing sequence your card uses, then press Select.
Dialing
sequence
Use for cards that
require you to:
Cards using
this sequence
Access no.
Dial 1-800 access number, MCI, AT&T
+ phone no. then phone number, then card True Choice,
+ card no.
number (+ PIN if required) SprintCanada,
Unitel
Access no.
+ card no.
Dial 1-800 access number, networkMCI,
then card number (+ PIN if WorldPhone
+ phone no. required), then phone number MCI
Prefix Dial the prefix (any numbers GTE, PacBell,
+ phone no. that must precede the phone AT&T, Stentor
+ card no.
number) and phone number
you want to dial, then card
number (+ PIN if required)
Note: The order of the following steps may vary, depending
on which dialing sequence your card uses.
6
7
8
Enter the access number (usually the 1-800 number
listed on the back of the calling card), then press OK.
Enter your card number and/or PIN, then press OK. Your
phone will display Save changes? Press OK.
Press
to reach Card name, then press Select. Enter
the card name using your phone’s keypad, then press OK.
Note: This procedure might not work with all calling cards.
Please look at the back of your calling card or contact your
long distance company for more information.
Choosing a calling card to use
Use Menu 4 1 3 to select a calling card to use. You are
required to enter your security code.
32
Calling card calls
To make a call using a calling card:
1
Enter the phone number, including any prefix (such as 0
or 1) that your calling card may require when you make
a calling card call (see your calling card for instructions).
2
3
Press and hold Call for a few seconds until your phone
displays Card call.
Your phone displays Wait for tone, then press OK. Wait
for the tone, then press OK.
Your phone displays Wait for tone, press OK again. Wait
for the tone again, then press OK.
Call forwarding
Call forwarding is a network service that lets you forward your
incoming calls to another phone number. Check with your
service provider for details and feature codes.
Activating call forwarding
Standard method
To activate call forwarding, you must get the call forwarding
activation code from your service provider.
1
Dial the code for activating call forwarding followed by
the phone number to which you want to forward your calls.
2
Press Call.
Example: If the call forwarding activation code is *71 and
the number you want to forward calls to is (214) 555-1234,
dial *712145551234, then press Call.
Menu method
You can save the code for activating call forwarding and then
use the menu to activate call forwarding (see ‘Adding feature
33
Cancelling call forwarding
Standard method
To cancel call forwarding, you must get the call forwarding
cancellation code from your service provider.
1
Dial the code for cancelling call forwarding (for example,
*710).
2
Press Call.
Menu method
You can save the code for cancelling call forwarding and then
use the menu to cancel call forwarding (see ‘Adding feature
Voice privacy
Note: Availability of this feature depends on your arrangement
with your service provider and the network’s ability to support
the feature.
Some service provider’s networks can encrypt the signal
transmitted during a phone call to ensure others are unable
to listen to your conversation. By default, the voice privacy
setting on your phone is set to Off. To turn it on, press
Menu 4-4-1 (Settings - Network services - Voice privacy).
Scroll to On, then press OK.
During a call, if voice privacy is lost, your phone sounds two
short beeps.
1-touch dialing
1-touch dialing lets you make phone calls quickly and easily
with the touch of a button. Once you have assigned a phone
number to a number key (2 through 8), you can press and hold
that key to dial the number. (You can also press and hold the
number key and then press Call.)
Note: Keys 1 and 9 are used exclusively for dialing your voice
mailbox and for attempting emergency calls, respectively
page 27).
34
Assigning numbers to keys
Before you can assign a phone number to a key, the phone
Then follow the steps below.
1
2
3
Press Menu 1 6.
Scroll to the desired key, then press Assign.
Press
or
to choose the name you want to assign
to the selected key, then press Select.
If a key already has a number assigned to it, you can press
Options and then view, change, or erase the number assignment.
Making calls using 1-touch dialing
Press and hold a number key (2 through 8) for a few seconds
to call the number assigned to it. Your phone finds the phone
number, displays it briefly, then dials it.
You can also enter the number of the 1-touch dialing key
(for example, 2) and press Call.
Choosing your phone number
(NAM selection)
Your service provider can set up your phone to have two phone
numbers that are activated in different service areas—for
example, one number for the Dallas area and one number for
the Chicago area.
A number assignment module, or NAM, consists of a phone
number and network information that the service provider
programs into your phone. When you select a NAM, you’re
not only selecting a phone number, you’re also selecting a
home system in which you will not be charged roaming fees.
Use Menu 4 4 6 to select a NAM.
35
Send own caller ID with next call
Send own caller ID with next call is a network service that lets
you hide your phone number from a person you are calling
who has Caller ID. (If for some reason your network prevents
phone numbers from being displayed, you may be able to use
this feature to show your number to the person you are calling.)
Contact your service provider for feature codes for showing/
hiding your phone number.
Note: This feature works on a call-by-call basis.
Standard method
1
Dial the feature code followed by the number you want
to call.
2
Press Call.
Example: If the feature code to hide your number is *67
and the number you want to dial is (214) 555-1234, dial
*672145551234, then press Call.
Menu method
You can save the feature code given to you by your service
provider so that Send own caller ID with next call appears
in your phone’s menu, and then use Menu 4 4 4 to use this
This feature must be activated before each call; you cannot
permanently turn it on or off.
Yes displays your number to the person you are calling.
No prevents your number from being shown to the person
you are calling.
NAM update
Note: This feature may not be available in all systems. Please
contact your service provider for details about the availability
of this feature.
With this feature you can activate or reactivate your phone
without having to go to your service provider. Please refer to
the Easy Activation card that was included in your sales package
for more information on how to activate or reactivate your
phone.
36
In some cases, when you try to connect to your service provider,
the following message may appear on the screen:
‘LOCK’ prevents the service provider from changing your
carrier lock code. ‘UNLOCK’ allows the provider to change
the code and restrict others from activating your phone.
If this happens, select the appropriate selection for your phone.
If you don’t want your service provider to change your lock
code, select LOCK. If you want to allow your service provider
to change your code to prevent other service providers from
activating your phone, press UNLOCK.
Press and hold
start screen.
for several seconds to return to the
Note: Contact your service provider if you have any questions.
System selection
The System menu (Menu 5) allows you to modify how your
phone will work when you are outside of your primary or
“home” system. (Items on the System menu may differ
depending on your service provider.) How your phone will
handle being out of your home area can significantly affect
the types and amounts of additional charges you may incur.
Service Types
In each wireless service area there are usually two service
providers, referred to as type A and type B.
When you first set up your wireless service account, your
service provider will inform you of which system you will
be using (for example, type A). This is your home system.
The other system (for example, type B) is known as your
non-home system.
Roaming
Roaming is a term used to indicate that your phone is not in
its home area. While roaming, you are actually using another
service provider’s system. Calls made or received while roaming
are usually more expensive than calls made in your home area.
37
Roaming indicators
When your phone begins roaming, Roaming appears. If roaming
in a non-preferred system, the roaming indicator ( ) also
appears.
System choices
Your phone will automatically try to use a preferred system.
If your phone fails to find a preferred system, then it will use
the selection you have chosen with this feature. Before you
select a system, contact your service provider to learn how
these changes may affect your phone bill. Items on the System
menu may differ depending on your service provider:
•
•
•
•
•
Automatic - Use the home system. If unavailable,
use a non-home system.
Automatic A - Use the home or preferred system.
If unavailable, use system A.
Automatic B - Use the home or preferred system.
If unavailable, use system B.
Home only or <service provider’s name> - Use only
the home system. If unavailable, No service appears.
Analog - Use the available analog network.
Note: If you turn your phone's power off then on, depending on
your service provider, the system may return to the default
selection.
Which system should you choose?
By default, your phone is set to automatically search for the
most cost-effective system when you are outside of your home
area. For example, if your home system is type A and you are
roaming, your phone will automatically try to use the local
home system (the type A system in your current location).
The type B system would be a non-home system.
However, in an area where no home or preferred systems are
available, use this menu to manually choose which system
your phone uses.
38
By setting your phone to use a home or preferred system, it’s
possible for you to receive discounted roaming charges. Check
with your service provider to maximize use of this feature.
In non-preferred systems, normal roaming charges are
determined by the host system. Your phone is designed to
select a system most favorable to you concerning the cost
of the call and reception quality.
Note: When roaming in some systems, you may need to have
a roaming agreement in order to place a call. If no roaming
agreement has been arranged, a network operator may interrupt
and request information on how you intend to pay for the call.
If you have more than one phone number
The currently-selected NAM in your phone determines which
system is your current home system. See “Choosing your phone
number (NAM selection)” on page 35 for more details.
Note: Powering the phone off then on will reset any manual
overrides for analog or non-preferred systems.
Anykey answer
This feature allows you to answer an incoming call by pressing
any key except
or off.
. Use Menu 4 1 5 to turn this feature on
Automatic answer
This feature is available only when your phone is connected
to a handsfree device.
When automatic answer is turned on, your phone answers
incoming voice calls after one ring. Use Menu 4 1 4 to turn
this feature on or off.
Touch tones
Your phone can generate various sounds, called touch tones,
when the keys are pressed.
39
Touch tones can be used for many automated services such
as checking voice mail, movie times, and airline arrival/
departure times.
Note: Sending confidential information over the air using
touch tones is not recommended.
Setting manual touch tone length
Use Menu 4 2 1 1 to set the length of touch tones created
when you press a key:
Continuous sounds the tone for as long as you press and
hold the key.
Fixed sets the tone length to one tenth of a second, regardless
of how long you press and hold the key.
Off turns off touch tones. No tones are sent when you press
the keys.
Setting automatic touch tone length
Use Menu 4 2 1 2 to set the length of touch tones sent
automatically by the phone to Short (one tenth of a second)
or Long (half a second).
Saving touch tone strings
Touch tone strings can be used for sending and receiving
information with your phone. Save touch tone strings the
same way you save phone numbers (see ‘Saving names and
For example, you can save your office voice mailbox number
along with your password for easy access to your messages
Sending touch tone strings
1
During a call, press
screen.
to clear any numbers from the
2
3
4
Press Options.
Scroll to Touch tones, then press OK.
Enter or find the touch tone string, then press OK.
40
Downloadable ringing tones
Depending on your service provider, you can download
(over the air) ringing tones and save them in your phone.
Note: The method that you use to download a ringing tone to
your phone varies among wireless service providers. For example,
in some cases, you can send a ringing tone to your phone from
an internet web page. For details about this network service,
contact your wireless service provider.
The names of tones that you download and save appear in
the list that you see when you press Menu 8 2 (Tones -
Ringing tone). In addition to the 40 default ringing tones
that come with your phone, you can save five downloaded
ringing tones.
When a ringing tone has been downloaded to your phone,
the message Ringing tone received appears.
•
To listen to the tone, press Options, scroll to Playback,
then press OK. The phone plays the tone. To stop playing
the tone, press Quit.
•
To discard the tone immediately after you receive it (before
you press Options), press <Clear>. Or, to discard the tone
after you have pressed Options, scroll to Discard, then
press OK.
•
To save the tone after you listen to it, scroll to Save, then
press OK. If space in your phone’s memory exists for the
tone, the tone is saved. If space does not exist, scroll until
the name of the tone you want to replace is highlighted,
then press Replace. To view the list of tones, press Menu
8 2 (Tones - Ringing tone).
Restore factory settings
You can use Menu 4 2 2 to reset many of the settings in your
phone to their factory defaults (as in a new phone). You are
required to enter the security code.
Note: The phone book, language setting, call timers, security
code, and lock code are not affected.
41
9. Call log
For your convenience, the call log (Menu 3) saves a list of phone
numbers you have dialed, and can show you approximately how
much time you have spent on the phone. If you subscribe to
the caller ID network service, the call log also records the
phone numbers of missed calls and received calls. Contact
your service provider for details.
The Options key
When you access Missed calls, Received calls, or Dialed calls
and press Options, a list of options appears on your phone’s
screen.
Call dials the number.
Call time shows the time of the call. (Your phone’s clock must
Use number shows you the number before you dial it.
Save lets you enter a name for the number, edit the number
if needed, and save both to your phone book.
Erase erases the number from the call list.
View number displays the associated phone number if only
the name is currently displayed.
Missed calls
If you subscribe to the caller ID network service, your phone
automatically stores the last 10 numbers that have tried
unsuccessfully to reach you (as long as the caller allowed
his or her number to be shown to you).
When the screen says Missed calls
Press List. If you have missed more than one call, you can
scroll through the list of numbers. To dial the displayed number,
press Options, then choose Call.
Viewing the missed calls list at any time
Use Menu 3 1 to view the missed calls list at any time.
To dial a number, press Options, then choose Call.
42
Received calls
If you subscribe to the caller ID network service, your phone
automatically stores the phone numbers of the 10 most recent
calls you’ve answered. Use Menu 3 2 to view the received
calls list. To dial a number, press Options, then choose Call.
Dialed calls
Your phone automatically stores the last 10 numbers you’ve
dialed. From the start screen, press
to access the dialed
calls list. Scroll to the desired number, then press Call.
the dialed calls list by pressing Menu 3 3.
Clearing call lists
Use Menu 3 4 to clear the missed, dialed, and/or received
call lists.
Call timers
Use Menu 3 5 to access this feature.
Call timers lets you see the amount of
time you’ve spent in calls. Times are for
the currently selected phone number;
your phone has a separate timer for
Note: The actual time invoiced for calls by your service provider
may vary, depending upon network features, rounding-off for
billing, and so forth.
Viewing call timers
Use Menu 3 5 to view the various call timers.
Last call displays the duration of the last call, or current call
if applicable.
All calls displays the duration of all calls since the timers were
last reset.
Life timer displays the duration of all calls for the life of
your phone and cannot be reset.
43
Setting timers back to 0
Use Menu 3 5 4 to clear call timers. You are required to
enter your security code.
Displaying the current call timer during calls
1
2
3
4
Press Menu 3 5 1.
Press Details.
Press Select.
Scroll to On, then press OK.
During a call, the amount of time spent in that call is displayed
for ten seconds.
44
10. Voice messages
Voice mail is a network service that allows callers to record
a message when you cannot be reached. You can then call
your voice mailbox and retrieve your messages.
Saving your voice mailbox number
When you subscribe to voice mail, your service provider gives
you a voice mailbox number. You should save this number so
you can call your voice mailbox by pressing and holding
,
or by pressing
In addition to a voice mailbox number, your service provider
may also give you a password, which you can save along with
your voice mailbox number. This way, you can access your voice
mailbox and then quickly send your password by pressing the
Navi™ key rather than dialing your password separately.
If your service provider gives you a password and you want
to save it with your voice mailbox number, refer to ‘Special
Listening to new voice messages
When you receive a voice message, your phone may notify you
by beeping, displaying the voice message indicator
,
and displaying New voice message. The phone may display
the number of messages if there is more than one.
Note: The method of notification depends on your service
provider.
When your phone notifies you that you have a new voice
message, press Listen. Your phone dials your voice mailbox
number, if you have saved it.
If you received a voice mailbox password, and if you saved it
with your voice mailbox number, follow these steps:
1
When your phone notifies you that you have a new voice
message, press Listen. Your phone dials your voice mailbox
number, and your password displays.
45
2
When your phone notifies you that you’re able to listen
to your messages, press Send.
Note: The method of notification depends on your service
provider. If you have any questions about voice messaging,
contact your service provider.
Calling your voice mailbox at any time
Once you have saved your voice mailbox number, you can
press and hold
to dial your voice mailbox.
46
11. Mobile messages
Note: Before you can send or receive mobile messages, you may
need to subscribe to the mobile messaging service offered by
your service provider. Also, some networks may not support
mobile messaging.
About mobile messages
A mobile message is a message in the form of text that appears
on your phone’s screen. You can address outgoing messages
to email addresses and phone numbers. The recipient of your
message typically receives it via:
•
•
•
a phone that supports mobile messaging
a pager
the internet (through an email client)
Message storage
Messages are stored in your phone in folders:
•
•
•
Inbox - Messages (whether read or unread) that you
have received and have neither erased nor saved.
Outbox - Messages that you sent (or that you have
created then saved, intending to send later).
Saved - Messages that were in the Inbox or Outbox
and which you have saved.
Your phone can store as many as 60 messages (memory is
shared by all folders). However, the total number of stored
messages depends on message length. If your phone’s memory
is full when you receive a mobile message:
•
If the message is not an emergency message, the oldest
sent message in the Outbox folder will automatically
be deleted, but “drafts” (unsent messages) will not be
deleted. If there are no sent messages in the Outbox
folder, the oldest read message in the Inbox folder is
deleted. If there are no read messages in the Inbox,
No space: message waiting or a similar message
appears, prompting you to delete messages from
one of the other folders. The network will resend the
message later.
47
•
If the message is an emergency message (sent only
by a network operator), in addition to the messages
mentioned above, other messages in the Inbox, Outbox,
and Saved folders could be automatically deleted if
your phone’s memory is full.
Types of mobile messages
Depending on your service provider, when you create a mobile
message, Text and Number only may appear in a list of menu
items, requiring that you select the type of message to send.
If this list does not appear, your phone will automatically create
the type of message supported by your service provider:
•
Text - A text mobile message can include text in
addition to a callback number.
•
Number only - A number only mobile message is
like a numeric page: a callback number (the sender’s
phone number) appears on the recipient’s pager or
phone display.
Parts of a mobile text message
A message consists of a header and a body. The header may
contain the sender’s phone number or email address and the
date and time that the message was sent. If an entry in your
Phone book matches the sender’s phone number, the sender’s
name also appears. The body contains the main part of the
message. If you receive a message that was sent via email,
the subject (title) of the message may appear at the beginning
of the message body.
Urgent mobile messages
An urgent priority level can be assigned to a mobile message.
When you receive an urgent mobile message, Urgent appears
in the message header. When you send an urgent mobile
message, a similar notification message (or an icon) appears
on the recipient’s phone or other device (if the recipient’s
phone or other device supports it). See ‘Sending a message’
48
Message delivery notification
When you send a message, you can request to be notified
when the recipient receives the message. This notification is
called a delivery note. See ‘Sending a message’ on page 58.
Receiving a mobile message
When you receive a mobile message, the mobile message icon
appears and Message received (or New emergency
message) is displayed. Also, depending on the message alert
tone setting, a tone may sound. See ‘Message alert tone’ on
page 24. You can:
•
Press
to dismiss the notification and read the
message later (it will be available from your Inbox),
or...
•
Press Read to read the message
Note: If No space: message waiting or a similar message
appears, there is no room left in your phone’s memory. You
need to make room for the message. See ‘Message storage’
If you press Read, the Inbox appears with the new message
selected. Press Read again. If necessary, scroll down to read
the entire message. At the end of the message, scroll further
to view the sender’s name or phone number and the date and
time the message was received. When you’ve seen the last new
message, the
icon disappears. While reading a message,
you have several Options (depending on the type of message,
some of these options may not be available):
•
•
•
Erase deletes the message. Press OK to confirm the
deletion or to cancel. For more information about
Reply allows you to send a message back to the sender.
For more information about replying to a message,
Save sends the message to the Saved folder.
49
•
Use number allows you to quickly call or save a phone
number if it was included in the message. If more
than one number was included, a list of numbers is
displayed. To save the number, read the message and
ensure that the number you want to save is visible
(if necessary, scroll the screen). Press Options. Scroll
to Use number and press Select. If only one phone
number appears on the screen, press Call (or press
<Down>, then press Save). If a list of numbers appears,
scroll to a number, press OK, then press Call (or press
<Down>, then press Save).
•
•
•
Save address extracts one or more email addresses
from the message (if it contains any) and allows you
to save them in your Phone book.
Forward allows you to forward the message to another
recipient. For more information about forwarding a
Reply w/ copy allows you to send a message back
to the sender. Your message will include a copy of
the message you received. For more information about
replying to a message, see ‘Replying to a message’
Creating, addressing, and sending a
number only message
Note: To create a text message, see ‘Creating a text message’
on page 51. For information about number only messages,
1
2
Press Menu 2 1 1 (Messages - Text messages - Write new).
Note: If Text and Number only appear in a list of menu
items, scroll to Number only, then press Select.
Use the following guidelines when addressing your message
and specifying a callback number:
•
Use Add number to specify a recipient’s phone
number. The maximum number of characters allowed
in a phone number is 32.
50
•
•
When prompted to enter a recipient’s phone number,
you can manually enter it or search for it.
When searching, the list of entries in your phone book
is displayed. To quickly jump to an entry, press the
appropriate key. For example, if the entry is "John"
(j), press <5 key>. To jump to "Kim" (k), press <5 key>
twice.
•
You can address your message to as many as 10
recipients. You can see a list of all recipients to
whom your message is addressed (List recipients).
•
•
You can create a message, save it in your Outbox,
then address it and send it later (Save).
The callback number (Callback no.) is the phone
number at which you want the recipient to call you.
When prompted to enter a callback number, the
default callback number (your mobile phone number)
may appear in the field. You can use this number or
enter a different number.
Creating a text message
Note: To create a number only message, see ‘Creating,
There are two ways to create a text message:
•
•
Write a new, blank message
•
•
Writing a new, blank message
1
Press Menu 2 1 1 (Messages - Text messages - Write new).
2
Do Text and Number only appear in a list of menu items?
•
•
Yes - Scroll to Text. Press Select. Go to the next step.
No - Go to the next step.
51
3
At this point, you can address your message or begin
writing it, then address it later:
•
To address your message, scroll to Add e-mail or
•
To begin writing your message, scroll to Edit message,
then press Select. The terms writing and editing refer
to the process of entering text into a text message.
4
After you have written your message, you can:
•
•
Save it to the Outbox, then address it send it later -
Press Options, scroll to Save, then press Select.
Replying to a message
1
Read the message to which you want to reply.
•
If you just received the message and the Start
screen is currently displayed, press Read.
•
•
If the message is in the Inbox folder, press Menu 2 1 2.
If the message is in the Saved folder, press Menu 2 1 4.
2
3
Scroll to the message. Press Read, then Options.
Scroll to Reply (or Reply w/ copy if you want your reply
to include a copy of the original message followed by the
text of your reply). Press Select.
Note: If you choose to Reply w/ copy, your message could be
rather long. In some networks, a long message may be truncated
(the end of the message may be cut off), preventing the recipient
from seeing all of it.
4
After you write your message, you can:
•
•
Save it to the Outbox (press Options, scroll to Save,
then press Select), then address it and send it later.
52
Addressing a text message
Note: To address a number only message, see ‘Creating,
Use the following procedure to address your message to one
or more recipients:
1
Are you currently editing the message that you want to
address?
•
•
Yes - Press Options, then go to the next step.
No (for example, you wrote the text message and
saved it, intending to send it later) - Open your Outbox
(Menu 2-1-3). Scroll until the message you want to
address is highlighted. Press Options. Scroll to Resend.
Press Select. Go to the next step.
2
3
Scroll to Add e-mail (to send the message to an email
address) or Add number (to send the message to a phone
number), then press Select.
Enter the email address or phone number, then press OK.
•
You can address a text message to as many as 10
email addresses, phone numbers, or a combination
of both. To see a list of all recipients to whom your
message is addressed, scroll to List recipients, then
press Select.
•
•
•
The maximum number of characters allowed in a
phone number is 32. The maximum number of
characters allowed in an email address is 48.
While entering a phone number or email address,
press and release
press and hold
to delete one character, or
to delete all characters.
If a recipient's email address or phone number is in
your Phone book, you can quickly enter it by searching
for the recipient's name. To search, press Search. To
quickly jump to an entry in your phone book, press
the appropriate key. For example, if the entry is "John"
(j), press <5 key>. To jump to "Kim" (k), press <5 key>
twice. If an email address or phone number is not
associated with the entry that you select, a message
will appear: No e-mail address found or No numbers
found.
53
•
When entering an email address manually, you can
quickly enter the @ symbol by pressing
repeatedly until it appears.
Entering text into a message
A counter in the top right corner of the screen indicates the
number of remaining characters that you can enter into
your message.
Caution: While editing a message, if you accidentally press
and hold
, all text within your message will be deleted.
To exit the message editor at any time and lose your text,
press Options, scroll to Exit, then press Select.
Ways to enter text into a message
There are several ways to enter text into a message:
•
Traditional (multi-tap) input method - (This is the default
mode.) This method requires that you press some keys
more than once (multi-tap). For example, to enter the
•
Predictive text input method - When using the predictive
text input method, your phone “guesses” which word you
are entering, requiring that you press a key only once for
each letter you enter. See ‘Predictive text input’ on page 55.
Note: By default, your phone is set in the traditional text
input mode. Before you can use the predictive text input
method, you must first activate the predictive text mode.
To activate it, press Options. Scroll to Predictive text.
Scroll until the name of the language in which you want
to edit your message appears. Press OK.
•
Templates - A template is a predefined, commonly used
sentence that you can quickly insert into a message. See
54
Predictive text input
Note: The predictive text feature is based on a built-in
dictionary to which you can add words. Your phone includes
several different language versions of this dictionary. Although
your phone may be able to display a given language on the
screen, it does not necessarily contain a predictive text
dictionary of that same language.
Predictive mode is indicated by the presence of the predictive
text icon (
) at the top of the display. If the icon does not
appear, predictive mode has been deactivated. To activate it,
press Options. Scroll to Predictive text. Scroll until the name
of the language in which you want to edit your message
appears. Press OK.
Writing words
To write a word, press each key only once for each letter of
the word. For example, to write hello, press 4 3 5 5 6. The
characters that you enter appear underlined. The word changes
after each keystroke, so try not to pay attention to how the
word appears on the display until you have pressed all the
appropriate keys.
When you finish writing the word, check to ensure that the
word is correct. If the word is correct, enter a space (press
) and write the next word. If the word is incorrect and
is underlined, press
repeatedly until the desired word
appears, OR press Options, scroll to Matches, then press OK.
Your phone displays a list of words. Choose a word from the
list, then press Use, OR, press
to exit and return to the
message editor.
If the ? character appears after the word, there are no more
words in the dictionary that correspond to your key presses.
At this point, you can add the word to the dictionary by
pressing Spell.
Writing compound words
To quickly write a compound word (for example, bluejay):
1
Write the first part (blue).
55
2
3
Press
from the first part.
(do not enter a space). The underline disappears
Write the second part (jay).
Deleting characters
To delete one character to the left of the cursor, press
.
To delete all characters in the message, press and hold
.
Changing the method of text input
To toggle between predictive
and traditional
text
input modes, press several times until the icon that
indicates the mode you want to use appears.
Tip: If you don’t want to use predictive text input mode at
all, you can deactivate it. (You can reactivate it later.) See
Changing letter case modes
To toggle between upper case
and lower case
letter mode, press . If predictive text mode is active, if
you don’t wait at least 1.5 seconds between key presses, the
text input mode will also be toggled between traditional
and predictive.
Note: If predictive text mode is active when you create a new
message, the first letter of the first word that you enter will
be upper case.
Entering numbers
To enter one or just a few numbers, press and hold the
respective number key. To enter many numbers, change to
number entry mode (
To change to number entry mode, press and hold
) and enter the numbers as usual.
, OR,
press Options, scroll to Insert number, then press Select.
Inserting special characters
To insert a special character (such as a punctuation mark), press
and hold
, OR press Options, scroll to Insert symbol,
then press Select. To quickly insert a period (.), press
.
To quickly insert double dashes (--) or three ellipses (...),
press
a few times.
56
Adding a new word to the dictionary
If the ? character appears after the word, press Spell. (OR, at
any time while editing, press Options, scroll to Insert word,
then press OK.) Enter the word using traditional text input, and
press Select. If the dictionary is full, the new word replaces the
oldest added word.
Changing the language of the dictionary
1
2
3
While editing a message, press Options.
Scroll to Predictive text, then press Select.
Scroll to a language, then press OK.
The selected language is now active.
Activating predictive text input mode
Press Options, scroll to Predictive text, then press Select.
Scroll to the desired input language, then press OK. Your
phone is now in predictive mode.
Deactivating predictive text input mode
While editing a message, press Options. Scroll to Predictive
text. Scroll to Prediction off, then press OK. Your phone is
now in traditional (multi-tap) mode.
Templates
Note: Templates are available in English only.
A template is a predefined, commonly used sentence that
you can quickly insert into a message. While you’re editing a
message, press Options, then select Add template. Select a
template:
1. Call me at [ ]. <phone number/time/place>
2. I’ll call you at [ ]. <time/place>
3. Meet me at [ ]. <time/place>
4. I’ll be there at [ ]. <time>
5. I’ll be [ ] minutes late. <number of minutes>
6. I’m running late.
7. I’m on my way.
8. Meeting cancelled.
57
9. Meeting changed to [ ]. <time/place>
10. Appointment cancelled.
11. I love you!
12. Thank you!
13. I’m sorry.
14. Call at your convenience.
15. Please call ASAP.
Brackets ([ ]) in a template represent a value that you can
specify. (The value is not retained for future use; you enter
the value each time you use the template.) If you select a
template that contains brackets, you’ll be prompted to enter
a value. You can edit the template text after you insert it
into your message.
Sending a message
This procedure assumes that you have already addressed your
message and entered some text into it (or have entered a
callback number). See ‘Addressing a text message’ on page 53.
Before you send your message, you can select one or more
options. While you're editing the message, press Options, scroll
to Settings, then press Select. To select an option, Mark it.
To deselect an option, Unmark it.
•
Urgent - Sets the priority level of your message to
"urgent". Urgent message or a similar notification
will appear on display screen of the recipient's phone
or other device.
•
Delivery note - When the recipient receives your
message, the network will send you a delivery note.
If you address the message to more than one recipient,
you will receive a separate delivery note for each
recipient.
•
Callback no. - Allows you to enter a phone number
at which the recipient can call you.
After you mark and unmark the options, press
. The
message Save changes? appears. To accept the changes that
you made to the settings, press Yes. To discard the changes,
press
again.
58
To send the message, press Options, scroll to Send, then press
OK. If the network can’t send your message, a warning note
should appear. Try to resend the message later. See ‘Resending
Resending a message
1
Open your Outbox (Menu 2-1-3). Scroll until the message
you want to resend is highlighted.
2
Press Options. Scroll to Resend. Press Select.
•
Before you resend your message, you can edit it. You
can also edit the recipients list (Add e-mail, Add
number, or List recipients).
•
All settings (Urgency, Delivery note, and Callback no.)
that you chose for the original message are retained
unless you edit the settings (Options > Settings).
3
To send the message, press Options, scroll to Send, then
press Select.
Forwarding a message
1
In the Inbox or Saved folder, read the message that you
want to forward.
2
3
Press Options, scroll to Forward, then press Select.
Prepare your message as you would any other message
that you create.
•
If the message you are forwarding is a text message,
you can edit the message before you send it.
•
If your phone is configured to be able to send a number
only message, you can forward a callback number as
a number only message, provided the original message
was also a number only message.
4
After you prepare your message, you can:
•
•
Save it to the Outbox (press Options, scroll to Save,
then press Select), then address it and send it later.
59
Erasing messages
You can erase the message you’re reading or several messages
at once.
Erasing the message you’re reading
Press Options, scroll to Erase., then press Select.
Erasing multiple messages
1
Press Menu 2 1 5.
2
Scroll until the appropriate item in the list is highlighted,
then press Select. Depending on your service provider, you
may be required to confirm your choice or enter your
security code to prevent accidental deletion of messages.
•
All read - Erases all read messages in the Inbox
(unread messages are not erased); erases all messages
in the Outbox and Saved folders (the Outbox and
Saved folders cannot contain unread messages).
•
•
•
All in inbox - Erases all messages (read or unread)
in the Inbox.
All in outbox - Erases all messages (sent or unsent)
in the Outbox.
All saved - Erases all messages in the Saved folder.
60
12. Extra features
Alarm clock
The alarm clock feature sounds an alert
at a time you specify.
Setting the alarm clock
Use Menu 7 1 to turn the alarm clock
on or off.
Note that when you’re entering the alarm time, use two digits
for both hours and minutes (for example, enter 1:30 as 0130).
Note: Pressing
does not work on this screen. If you make
a mistake, re-enter all four digits. Press up or down on the scroll
keys to move the cursor. The number you press is entered to
the right of the cursor.
Alarm volume
The alarm volume is determined by the current ringing volume.
However, if you have manually set the ringing option (see
sounds a quiet beep.
When the alarm sounds
•
To shut off the alarm, press any key except Snooze.
•
If you press Snooze, the alarm sounds again in ten minutes.
To turn off the alarm before then, press Stop.
•
If you let the alarm sound for one minute without pressing
a key, it stops for ten minutes, then starts again.
If you turn off the phone
If you turn off the phone and the alarm is set, the phone
switches itself on at alarm time, then the alarm sounds.
•
To shut off the alarm, press any key except Snooze.
The phone displays Keep the phone on?. Press Yes to
keep it on or
to switch it off.
61
•
If you press Snooze, the phone turns itself off for ten
minutes, then the alarm sounds again.
REMEMBER! Do not switch on the phone when wireless phone
use is prohibited or when it may cause interference or danger.
Games
Use Menu 6 to challenge yourself or a friend to the three
fun games in your phone. To pause a game, press
.
To resume, choose Continue.
REMEMBER! Your phone must be switched on to use this
function. Do not switch on the phone when wireless phone
use is prohibited or when it may cause interference or danger.
Memory
Reveal pictures to find pairs in as few tries as possible. Move
the cursor with the 2 (up), 4 (left), 6 (right), and 8 (down) keys.
Press the 5 key to reveal pictures. Once found, pairs stay visible.
Press
move from the bottom right of the screen to the top left.
Press to jump to the left over revealed pictures or to
to jump to the right over revealed pictures or to
move from the top left of the screen to the bottom right.
Snake
Feed the snake with as many goodies as possible and watch
it grow. Use keys 2, 4, 6, and 8 to turn the snake toward food.
The longer the snake’s tail grows, the higher your score. If the
snake hits its own tail or the surrounding wall, the game is over.
Logic
Find the secret combination of figures in a column. Possible
figures are shown at the top of the screen. Press the 5 key
repeatedly to select a figure and the 2, 4, and 8 keys to move
the cursor. Once you think you have the right combination,
press
. The result appears as a set of marks above the
column. A correct figure in the right place gets a full mark; a
correct figure in the wrong place gets a half mark. The game
ends when the correct figures are in the right place.
Tip: To copy a figure from the previous column, move
the cursor over it using the 2, 4, or 8 key, then press
the 5 key.
62
13. Security features
Access codes overview
Access codes consist of the lock code and security code. When
you get your phone, you should change these codes from their
defaults, write down the new codes, and keep them in a safe
place away from the phone. Avoid using access codes that
are similar to emergency numbers, such as 911, to prevent
accidental dialing of the emergency number.
Lock code
Your phone’s lock code is used to lock and unlock your phone.
Depending on your service provider, the default lock code is
either 1234 or the last four digits of your phone number.
Use Menu 4 3 2 3 to change the lock code.
When the phone requires the lock code, it displays Enter
lock code:. Enter the code, then press OK.
If you enter a wrong lock code five times in succession, your
phone prompts you for the security code.
Security code
The security code is required to restrict calls and to restore
factory settings. The default security code is 12345. Use
Menu 4 3 2 4 to change the security code.
When the phone requires the security code, it displays
Security code: Enter the code, then press OK.
If you enter an incorrect security code five times in succession,
the phone will not accept any input for the next five minutes.
Restricting calls
Use Menu 4 3 1 to restrict outgoing or incoming calls. This
is handy if you want to lend your phone to someone but don’t
want them to make long-distance or other expensive calls.
63
Restricting incoming calls
You can block all incoming calls or create a list of incoming
numbers from which you don’t want to receive calls. To block
all incoming calls, enter your security code, scroll to Select
and press OK, then press Mark.
Press Unmark if you want to remove the restriction.
Press
, then press Yes to save your changes (or
to cancel).
Note: This feature requires the caller ID network service, and
the caller’s ID must be available to the phone in order for the
restriction to work.
Adding numbers to the restricted incoming calls list
A call restriction can consist of an entire phone number, just
an area code, etc. When the restriction is selected, calls cannot
be received from any number beginning with those digits.
For example, entering 2145551234 blocks calls from (214)
555-1234 only. 214 blocks all calls from the 214 area code.
To create a list of incoming numbers from which you don’t
want to receive calls, enter your security code, then press OK.
Continue with the steps illustrated below.
1
2
3
Scroll to Add restriction, then
press OK.
Enter the phone number, area code,
etc. of the number from which you
want to restrict calls, then press OK.
If you want, give a name of up to
10 characters to the restriction
(such as Joey), then press OK.
64
The entry is added to your list of restricted numbers. Your
phone can save up to 15 restricted incoming numbers.
Once you enter 15 restricted numbers, the Add restriction
option is removed from the menu. This option is available
again once you delete one or more phone numbers from
the restricted list.
Note: Your phone does not alert you to incoming calls from
restricted numbers unless the caller leaves a voice message.
Making changes to the restricted incoming calls list
To edit or completely erase an entry in the list, choose Edit
or Erase, select the entry you want to edit or erase, and
follow the instructions on the screen.
Allowing calls from a number on the list
If you later decide to allow calls to a
restricted number, scroll to Select and
press OK to see your list of numbers.
Press Unmark to remove the restriction.
(The number remains in the list so that
you can restrict it again later by pressing Mark.) When you’re
done, press
. Press Yes to save your changes (or
to cancel).
Restricting outgoing calls
You can block all outgoing calls or create a list of numbers
to which outgoing calls cannot be made. To block all
outgoing calls,
1
2
3
4
Enter your security code and press OK.
Scroll to Select and press OK.
With All calls highlighted, press Mark.
Press
, then press Yes to save your changes (or
to cancel).
65
Adding numbers to the restricted outgoing calls list
A call restriction can consist of an entire phone number, an
area code, etc. When the restriction is selected, calls cannot
be made to any number beginning with those digits. For
example, entering 2145551234 blocks calls to (214) 555-
1234 only. 1 blocks all calls starting with 1, including long
distance calls and 1-800 calls. 1800 blocks 1-800 calls only.
To prevent your phone from making outgoing calls, scroll to
Add restriction and press OK. Continue with the steps
illustrated below.
1
2
3
Scroll to Add restriction, then
press OK.
Enter the phone number, area code,
etc. to which you want to restrict
calls, then press OK.
If you want, give a name of up to
10 characters to the restriction (such
as Joey, Long dist, or 1-800 #s),
then press OK.
The entry is added to your list of
restricted numbers. Your phone can
save up to 10 restricted outgoing numbers. Once you
enter 10 restricted numbers, the Add restriction option
is removed from the menu. This option is available again
once you delete one or more phone numbers from the
restricted list.
Making changes to the restricted outgoing calls list
To edit or completely erase an entry in the list, choose Edit
or Erase, select the entry you want to edit or erase, and
follow the instructions on the screen.
66
Allowing calls to a number on the list
If you later decide to allow calls to a
restricted number, scroll to Select and
press OK. You can now see your list of
numbers. Press Unmark to remove the
restriction. (The number remains in the
list so that you can restrict it again later by pressing Mark.)
When you’re done, press
. Press Yes to save your
changes (or
to cancel).
Phone lock
You can prevent unauthorized use of your phone by locking
it. When your phone is locked, only incoming calls and calls
to the unlocked phone number (see below) are allowed.
The memory and menu are unavailable.
Note: Calls may still be possible to emergency numbers.
How to lock your phone
press OK. Scroll to On, then press OK.
How to unlock your phone
Press Menu, enter the lock code, then press OK.
Answering a call when the phone is locked
Press Answer.
Saving the unlocked phone number
Use Menu 4 3 2 2 to save a number that may be called even
when your phone is locked. You are required to enter the
lock code.
Calling the unlocked phone number
Press
or
, or manually enter the number exactly as it
is saved, then press Call.
67
14. Accessories
An extensive range of accessories
is available for your phone. You
can select the accessories that best
suit your specific communication
needs. For availability, see your
local authorized Nokia dealer.
A few practical rules for accessory
operation:
•
•
Keep accessories out of small children's reach.
When you disconnect the power cord of any accessory,
grasp and pull the plug, not the cord.
•
•
Check regularly that all wireless phone equipment in your
vehicle is mounted and operating properly.
Installation of complex car equipment must be completed
by qualified personnel only.
WARNING!
Use only batteries, chargers and accessories approved by the
phone manufacturer for use with this particular phone model.
The use of any other types may invalidate any approval or
warranty applying to the phone, and may be dangerous.
68
Nokia Xpress-on™ color covers
Your phone’s Xpress-on™ cover is available in several fashion
colors. Extra covers may be purchased from your authorized
Nokia dealer.
Note: Always store your phone with the cover attached.
Changing covers
When changing covers, don’t use the phone’s antenna as
leverage!
1
Switch off the power and disconnect the phone from
the charger or any other device.
2
Using a coin, depress the
colored tab on the top of
the phone and slide the
color cover forward.
3
Remove the cover.
69
4
Remove therubberkeypad
from the back of the
cover. Place it into the
back of the new cover.
5
Place the bottom of the
cover against the bottom
of the phone. Make sure
all three sets of plastic
tabs line up with their
respective slots, as shown
at left. Close the cover
and snap it shut all the
way around the edge of
the phone.
Batteries
Several batteries are available for your phone:
•
•
•
•
•
BLS-2N Extended Li-Ion 900 mAh
BLS-4 Ultra Extended Li-Ion 1500 mAh
BMS-2S Extended NiMH 900 mAh
BMS-2V Vibrating NiMH 900 mAh
BPS-1 Ultra Slim Li-Polymer 600 mAh
70
Charging times
The table below displays approximate battery charging times.
These charging times charge your phone to about 80% of its
capacity, and the battery strength indicator stops scrolling.
If you wish to obtain 100% battery capacity, please allow
another two hours for “maintenance” charge.
Rapid Cig.
Standard
Travel Charger
ACP-7U
Rapid Travel
Charger
ACP-9U
Lighter
Charger
LCH-9
Battery
BLS-2N Extended Li-Ion
900 mAh
4 hours
5-6 hours
4 hours
2 hours
BLS-4 Ultra Extended Li-Ion
1500 mAh
3 hours, 30 minutes
1 hour, 30 minutes
1 hour, 30 minutes
1 hour, 20 minutes
BMS-2S Extended NiMH
900 mAh
BMS-2V Vibrating NiMH
900 mAh
4 hours
BPS-1 Ultra Slim Li-Polymer
600 mAh
2 hours,
30 minutes
Talk and standby times
The table below displays approximate talk and standby times.
Variations occur depending on network settings and usage.
Digital
Talk Time
Analog
Talk Time
Battery Option
Standby Time
BLS-2N Extended
Li-Ion
2 hrs to
2 hrs 55 min
40 min to
1 hr 25 min 10 to 15 hrs (ana)
70 to 110 hrs (dig)
900 mAh
BLS-4 Ultra
Extended Li-Ion
1500 mAh
3 hrs 20 min to 1 hr 10 min to 115 to 180 hrs (dig)
4 hrs 50 min
2 hrs 25 min 15 to 23 hrs (ana)
BMS-2S Extended
NiMH
2 hrs to
2 hrs 55 min
40 min to
1 hr 25 min 10 to 15 hrs (ana)
70 to 110 hrs (dig)
900 mAh
BMS-2V Vibrating
NiMH
2 hrs to
2 hrs 55 min
40 min to
1 hr 25 min 10 to 15 hrs (ana)
70 to 110 hrs (dig)
900 mAh
BPS-1 Ultra Slim 1 hr 20 min to
25 min to
55 min
46 to 73 hrs (dig)
8 to 16 hrs (ana)
Li-Poymer
1 hr 55 min
600 mAh
71
The times shown are approximate, and represent a range for
either standby or talk times (not a combination of both).
Battery operation times vary according to signal conditions,
network parameters set by the service provider, and how you
use your phone.
Note: Dispose of used batteries in accordance with local
regulations.
Chargers and other accessories
WARNING!
This apparatus is intended for use when supplied with power
from the Standard Travel Charger (ACP-7U), Rapid Travel
Charger (ACP-9U), or Rapid Cigarette Lighter Charger (LCH-9).
Other usage will invalidate any approval given to this apparatus
and may be dangerous.
The following chargers and other accessories are available for
your phone; please see your dealer for details. Also, refer to any
accessory options manual that may have been included in your
sales package for the entire line of Nokia Original Accessories.
Note: When a charger is not in use, disconnect it from the
power source. Do not leave the battery connected to a charger
for longer than a week, since overcharging may shorten its
life. If left unused, a fully charged battery will discharge itself
over time.
ACP-7U Standard Travel Charger
Use this durable and economical
charger to charge all battery options.
Plug the charger into a wall outlet and
connect the connector to the bottom
of your phone. Check the charging
status on your phone’s screen.
Calls can be made during charging,
but charging will stop for the duration of the call and the
battery bar scrolling stops.
72
Note: If the battery is completely empty, you cannot use the
phone until it has enough charge to operate.
The Standard Travel Charger is available for different voltage
levels and can also be used with the DCH-9 Compact Desktop
Charging Stand.
ACP-9U Rapid Travel Charger
The extremely light, functionally designed
Rapid Travel Charger charges your phone
battery quickly.
Plug the charger into a wall outlet and
connect the connector to the bottom of
your phone. Check the charging status on
your phone’s screen. You can use your
phone while charging.
Operating within a voltage range of 100V-240V AC
(50Hz-60Hz), the Rapid Travel Charger is practically voltage-
independent in normal office and household use. Like the
Standard Travel Charger, the Rapid Travel Charger is compatible
with all battery options. The Rapid Travel Charger can also
be used with the DCH-9 Compact Desktop Charging Stand.
LCH-9 Rapid Cigarette Lighter Charger
Using the multivoltage Rapid
Cigarette Lighter Charger, you
can charge your phone when
you travel. The small charger's
functional design fits well with
most car lighters and interiors.
Charging times are the same as for the Rapid Travel Charger
ACP-9U. Calls can be made during charging.
A green light indicates that the Rapid Cigarette Lighter Charger
is ready to charge. Check the charging status on your phone’s
screen. The input voltage is 12 or 24 V DC, negative grounding.
The Rapid Cigarette Lighter Charger can be used with all
accessories available for your phone.
73
Avoid prolonged charging with the Rapid Cigarette Lighter
Charger when the car engine is not running. This may cause
the battery of your car to drain.
Note: In some cars the cigarette lighter plug is not provided
with power when the ignition is switched off. Verify that the
green LED light is lit.
DCH-9 Compact Desktop Charging Stand
Compatible with all battery
options, the Compact Desktop
Charging Stand can be used
with the Standard Travel
Charger ACP-7U or the Rapid
Travel Charger ACP-9U. The
Compact Desktop Charging
Stand provides mounting for both the phone and a spare
battery. Plug the charger into a wall outlet and connect the
connector to the back of the Compact Desktop Charging
Stand. Place your phone and/or a spare battery in the stand
to begin battery charging.
When the phone is charging, no lights are displayed on the
stand; check the charging status of the phone battery on your
phone’s screen.
Charging moves to the rear slot once the front battery is
100% charged.
When the spare battery is charging, check the status indicator
on the left side of the charging stand. A red light indicates
that the battery is charging; a green light indicates that the
battery is charged to at least 80% of its capacity.
74
DCH-9 Rear Slot Charging Times
Using ACP-7U
Using ACP-9U
Battery
Back slot
only
Both slots
full
Back slot
only
Both slots
full
BLS-2N Extended
Li-Ion 900 mAh
BMS-2S Extended
NiMH 900 mAh
6 hours,
30 minutes 45 minutes
9 hours,
6 hours,
15 minutes
4 hours
BMS-2V Vibrating
NiMH 900 mAh
BLS-4 Ultra Extended
Li-Ion 1500 mAh
12 hours
4 hours,
18 hours
6 hours,
8 hours
3 hours
12 hours
BPS-1 Ultra Slim
Li-Polymer
600 mAh
4 hours,
30 minutes
30 minutes 30 minutes
The phone has the built-in intelligence to maintain the battery,
so there is no need for a discharge feature on the stand.
75
15. Reference information
Important safety information
Traffic safety
Do not use a hand-held telephone while driving a vehicle. If using a
hand-held phone park the vehicle before conversing.
Always secure the phone in its holder; do not place the phone on the
passenger seat or where it can break loose in a collision or sudden stop.
The use of an alert device to operate a vehicle’s lights or horn on public
roads is not permitted.
Remember, road safety always comes first!
Operating environment
Remember to follow any special regulations in force in any area and
always switch off your phone whenever it is forbidden to use it, or
when it may cause interference or danger.
When connecting the phone or any accessory to another device, read
its user’s guide for detailed safety instructions. Do not connect
incompatible products.
As with other mobile radio transmitting equipment, users are advised
that for the satisfactory operation of the equipment and for the safety
of personnel, it is recommended that the equipment should only be used
in the normal operating position (held to your ear with the antenna
pointing over your shoulder).
Electronic devices
Most modern electronic equipment is shielded from radio frequency
(RF) signals. However, certain electronic equipment may not be shielded
against the RF signals from your wireless phone.
Pacemakers
Pacemaker manufacturers recommend that a minimum separation of 6
inches (20 cm.) be maintained between a handheld wireless phone and
a pacemaker to avoid potential interference with the pacemaker. These
recommendations are consistent with the independent research by and
recommendations of Wireless Technology Research.
Persons with pacemakers:
•
Should always keep the phone more than 6 inches (20 cm) from
their pacemaker when the phone is switched on;
•
•
Should not carry the phone in a breast pocket;
Should use the ear opposite the pacemaker to minimize the
potential for interference.
•
If you have any reason to suspect that interference is taking place,
switch off your phone immediately.
76
Hearing aids
Some digital wireless phones may interfere with some hearing aids. In
the event of such interference, you may want to consult your service
provider.
Other medical devices
Operation of any radio transmitting equipment, including cellular
phones, may interfere with the functionality of inadequately protected
medical devices. Consult a physician or the manufacturer of the medical
device to determine if they are adequately shielded from external RF
energy or if you have any questions. Switch off your phone in health
care facilities when any regulations posted in these areas instruct you
to do so. Hospitals or health care facilities may be using equipment
that could be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately shielded
electronic systems in motor vehicles (e.g. electronic fuel injection
systems, electronic anti-skid (anti-lock) braking systems, electronic
speed control systems, air bag systems). Check with the manufacturer
or its representative regarding your vehicle. You should also consult the
manufacturer of any equipment that has been added to your vehicle.
Posted facilities
Switch your phone off in any facility where posted notices so require.
Potentially explosive atmospheres
Switch off your phone when in any area with a potentially explosive
atmosphere and obey all signs and instructions. Sparks in such areas
could cause an explosion or fire resulting in bodily injury or even death.
Users are advised to switch off the phone while at a refueling point
(service station). Users are reminded of the need to observe restrictions
on the use of radio equipment in fuel depots (fuel storage and distri-
bution areas), chemical plants or where blasting operations are in
progress.
Areas with a potentially explosive atmosphere are often but not always
clearly marked. They include below deck on boats; chemical transfer
or storage facilities; vehicles using liquefied petroleum gas (such as
propane or butane); areas where the air contains chemicals or particles,
such as grain, dust or metal powders; and any other area where you
would normally be advised to turn off your vehicle engine.
Vehicles
Only qualified personnel should service the phone, or install the phone
in a vehicle. Faulty installation or service may be dangerous and may
invalidate any warranty which may apply to the unit.
Check regularly that all wireless phone equipment in your vehicle is
mounted and operating properly.
77
Do not store or carry flammable liquids, gases or explosive materials in
the same compartment as the phone, its parts or accessories.
For vehicles equipped with an air bag, remember that an air bag inflates
with great force. Do not place objects, including both installed or
portable wireless equipment, in the area over the air bag or in the air
bag deployment area. If in-vehicle wireless equipment is improperly
installed and the air bag inflates, serious injury could result.
Switch off your phone before boarding an aircraft. The use of wireless
telephones in an aircraft may be dangerous to the operation of the
aircraft, disrupt the wireless telephone network and may be illegal.
Failure to observe these instructions may lead to the suspension or
denial of telephone services to the offender, or legal action, or both.
Emergency calls
IMPORTANT!
This phone, like any wireless phone, operates using radio signals, wireless
and landline networks as well as user- programmed functions which
cannot guarantee connection in all conditions. Therefore, you should
never rely solely upon any wireless phone for essential communications
(e.g. medical emergencies).
Remember, to make or receive any calls the phone must be switched on
and in a service area with adequate signal strength. Emergency calls
may not be possible on all wireless phone networks or when certain
network services and/or phone features are in use. Check with local
service providers.
Making an emergency call
1
If the phone is not on, switch it on.
2
Press and hold
phone for calls.
for several seconds to ready the
3
4
Key in the emergency number for your present location
(e.g. 911 or other official emergency number). Emergency
numbers vary by location.
Press Call.
If certain features are in use (Keyguard, call restrictions, etc.), you may
first need to turn those features off before you can make an emergency
call. Consult this document and your local cellular service provider.
When making an emergency call, remember to give all the necessary
information as accurately as possible. Remember that your wireless
phone may be the only means of communication at the scene of an
accident - do not cut off the call until given permission to do so.
78
Radio frequency (RF) signals
THIS MODEL PHONE MEETS THE GOVERNMENT'S REQUIREMENTS
FOR EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It is designed
and manufactured not to exceed the emission limits for exposure
to radio frequency (RF) energy set by the Federal Communications
Commission of the U.S. Government. These limits are part of compre-
hensive guidelines and establish permitted levels of RF energy for the
general population. The guidelines are based on standards that were
developed by independent scientific organizations through periodic
and thorough evaluation of scientific studies. The standards include
a substantial safety margin designed to assure the safety of all
persons, regardless of age and health.
The exposure standard for wireless mobile phones employs a unit of
measurement known as the Specific Absorption Rate, or SAR. The SAR
limit set by the FCC is 1.6W/kg.* Tests for SAR are conducted using
standard operating positions accepted by the FCC with the phone
transmitting at its highest certified power level in all tested frequency
bands. Although the SAR is determined at the highest certified power
level, the actual SAR level of the phone while operating can be well
below the maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power required
to reach the network. In general, the closer you are to a wireless base
station antenna, the lower the power output.
Before a phone model is available for sale to the public, it must be tested
and certified to the FCC that it does not exceed the limit established
by the government-adopted requirement for safe exposure. The tests
are performed in positions and locations (for example, at the ear and
worn on the body) as required by the FCC for each model. The highest
SAR value for this model phone as reported to the FCC when tested for
use at the ear is 1.49 W/kg, and when worn on the body, as described
in this user guide, is 1.45 W/kg. (Body-worn measurements differ
among phone models, depending upon available accessories and FCC
requirements).
While there may be differences between the SAR levels of various
phones and at various positions, they all meet the government
requirement.
The FCC has granted an Equipment Authorization for this model
phone with all reported SAR levels evaluated as in compliance with
the FCC RF exposure guidelines. SAR information on this model
phone is on file with the FCC and can be found under the Display
FCC ID: GMLNSD-1FW.
For body worn operation, to maintain compliance with FCC RF exposure
guidelines, use only Nokia approved accessories. When carrying the
phone while it is on, place the phone in the specific Nokia belt-clip
that has been tested for compliance.
79
Use of non-Nokia-approved accessories may violate FCC RF exposure
guidelines and should be avoided.
* In the United States and Canada, the SAR limit for mobile phones
used by the public is 1.6 watts/kg (W/kg) averaged over one gram
of tissue. The standard incorporates a substantial margin of safety
to give additional protection for the public and to account for any
variations in measurements. SAR values may vary depending on
national reporting requirements and the network band. For SAR
information in other regions please look under product information
80
Care and maintenance
Your phone is a product of superior design and craftsmanship and
should be treated with care. The suggestions below will help you to
fulfill any warranty obligations and allow you to enjoy this product
for many years. When using your phone, battery, charger, OR any
accessory:
•
•
•
•
Keep it and all its parts and accessories out of small children’s
reach.
Keep it dry. Precipitation, humidity and liquids contain minerals
that will corrode electronic circuits.
Do not use or store it in dusty, dirty areas as its moving parts can
be damaged.
Do not store it in hot areas. High temperatures can shorten the
life of electronic devices, damage batteries, and warp or melt
certain plastics.
•
Do not store it in cold areas. When the phone warms up (to its
normal operating temperature), moisture can form inside the
phone, which may damage the phone's electronic circuit boards.
•
•
•
Do not attempt to open it. Non-expert handling of the device
may damage it.
Do not drop, knock or shake it. Rough handling can break internal
circuit boards.
Do not use harsh chemicals, cleaning solvents, or strong detergents
to clean it. Wipe it with a soft cloth slightly dampened in a mild
soap-and-water solution.
•
•
Do not paint it. Paint can clog the device’s moving parts and
prevent proper operation.
Use only the supplied antenna. Removal and replacement of the
antenna by anyone other than a Nokia authorized service center
is an unauthorized modification and invalidates the warranty,
can damage the phone, and may violate regulations covering
radio devices.
•
If the phone, battery, charger, or any accessory is not working
properly, take it to your nearest qualified service facility. The
personnel there will assist you, and if necessary, arrange for service.
81
16. Technical information
Operating voltage
3.6 V nominal
Frequency bands
Highband
1850.04 - 1909.92 MHz (TX)
1930.08 - 1989.96 MHz (RX)
Number of NAMs
Memory locations
Memory capacity
2
100
16 characters per name
32 characters per number
Part No. 9353433
Printed in Canada
08/01
Nokia, Connecting People and the Original Accessories logos are
trademarks of Nokia Corporation and/or its affiliates.
T9 text input software Copyright © 1999-2001. Tegic Communications,
Inc. All rights reserved.
The information contained in this User Guide was written for the Nokia
5170i phone.
The right to make changes and improvements to any of the products
described in this guide without prior notice is reserved.
Issue No. 2a © 2001 Nokia Mobile Phones. All rights reserved.
This product contains commodities, technology or software exported
from the United States in accordance with the Export Administration
regulations. Diversion contrary to U.S. law is prohibited.
82
17. Nokia One-Year Limited
Warranty
Nokia Inc. (“Nokia”) warrants that this cellular phone (“Product”) is free
from defects in material and workmanship that result in Product failure
during normal usage, according to the following terms and conditions:
1. The limited warranty for the Product extends for ONE (1) year
beginning on the date of the purchase of the Product.
2. The limited warranty extends to the original purchaser of the Product
(“Consumer”) and is not assignable or transferable to any subsequent
purchaser/end-user.
3. The limited warranty extends only to Consumers who purchase the
Product in the United States.
4. During the limited warranty period, Nokia will repair, or replace, at
Nokia's option, any defective parts, or any parts that will not properly
operate for their intended use with new or factory rebuilt replacement
items if such repair or replacement is needed because of product
malfunction or failure during normal usage. No charge will be made to
the Consumer for any such parts. Nokia will also pay for the labor
charges incurred by Nokia in repairing or replacing the defective parts.
The limited warranty does not cover defects in appearance, cosmetic,
decorative or structural items, including framing, and any non-operative
parts. Nokia's limit of liability under the limited warranty shall be the
actual cash value of the Product at the time the Consumer returns the
Product for repair, determined by the price paid by the Consumer for
the Product less a reasonable amount for usage. Nokia shall not be liable
for any other losses or damages. These remedies are the Consumer’s
exclusive remedies for breach of warranty.
5. Upon request from Nokia, the Consumer must prove the date of the
original purchase of the Product by a dated bill of sale or dated itemized
receipt.
6. The Consumer shall bear the cost of shipping the Product to Nokia in
Melbourne, Florida. Nokia shall bear the cost of shipping the Product
back to the Consumer after the completion of service under this limited
warranty.
7. The Consumer shall have no coverage or benefits under this limited
warranty if any of the following conditions are applicable:
a) The Product has been subject to abnormal use, abnormal conditions,
improper storage, exposure to moisture or dampness, unauthorized
modifications, unauthorized connections, unauthorized repair, misuse,
neglect, abuse, accident, alteration, improper installation, or other acts
which are not the fault of Nokia, including damage caused by shipping.
83
b) The Product has been damaged from external causes such as collision
with an object, or from fire, flooding, sand, dirt, windstorm, lightning,
earthquake or damage from exposure to weather conditions, an Act
of God, or battery leakage, theft, blown fuse, or improper use of any
electrical source, or damage caused by the connection to other products
not recommended for interconnection by Nokia.
c) Nokia was not advised by the Consumer in writing of the alleged
defect or malfunction of the Product within fourteen (14) days after the
expiration of the applicable limited warranty period.
d) The Product serial number plate or the accessory data code has been
removed, defaced or altered.
e) The defect or damage was caused by the defective function of the
cellular system or by inadequate signal reception by the external antenna.
8. If a problem develops during the limited warranty period, the
Consumer shall take the following step-by-step procedure:
a) The Consumer shall return the Product to the place of purchase for
repair or replacement processing.
b) If “a” is not convenient because of distance (more than 50 miles) or
for other good cause, the Consumer shall ship the Product prepaid and
insured to:
Nokia Inc.
Attn: Repair Department
795 West Nasa Blvd.
Melbourne, FL 32901
c) The Consumer shall include a return address, daytime phone number
and/or fax number, complete description of the problem, proof of
purchase and service agreement (if applicable). Expenses related to
removing the Product from an installation are not covered under this
limited warranty.
d) The Consumer will be billed for any parts or labor charges not
covered by this limited warranty. The Consumer will be responsible
for any expenses related to reinstallation of the Product.
e) Nokia will repair or authorize the repair of the Product under the
limited warranty within 30 days after receipt of the Product by Nokia
or a Nokia authorized service center. If Nokia cannot perform repair
covered under this limited warranty within 30 days, or after a reasonable
number of attempts to repair the same defect, Nokia at its option,
will provide a replacement Product or refund the purchase price of
the Product less a reasonable amount for usage.
84
f) If the Product is returned to Nokia during the limited warranty period,
but the problem with the Product is not covered under the terms and
conditions of this limited warranty, the Consumer will be notified and
given an estimate of the charges the Consumer must pay to have the
Product repaired, with all shipping charges billed to the Consumer. If the
estimate is refused, the Product will be returned freight collect. If the
Product is returned to Nokia after the expiration of the limited warranty
period, Nokia's normal service policies shall apply and the Consumer
will be responsible for all shipping charges.
9. The Product consists of newly assembled equipment that may contain
used components that have been reprocessed to allow machine
compliance with Product performance and reliability specifications.
10. ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR
A PARTICULAR PURPOSE OR USE, SHALL BE LIMITED TO THE DURATION
OF THE FOREGOING LIMITED WRITTEN WARRANTY. OTHERWISE, THE
FOREGOING LIMITED WARRANTY IS THE CONSUMER'S SOLE AND
EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED. NOKIA SHALL NOT BE LIABLE FOR SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT
LIMITED TO, LOSS OF ANTICIPATED BENEFITS OR PROFITS, LOSS OF
SAVINGS OR REVENUE, PUNITIVE DAMAGES, LOSS OF USE OF THE
PRODUCT OR ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST
OF ANY SUBSTITUTE EQUIPMENT OR FACILITIES, DOWNTIME, THE
CLAIMS OF ANY THIRD PARTIES, INCLUDING CUSTOMERS, AND INJURY
TO PROPERTY, RESULTING FROM THE PURCHASE OR USE OF THE
PRODUCT OR ARISING FROM BREACH OF THE WARRANTY, BREACH
OF CONTRACT, NEGLIGENCE, STRICT TORT, OR ANY OTHER LEGAL OR
EQUITABLE THEORY, EVEN IF NOKIA KNEW OF THE LIKELIHOOD OF
SUCH DAMAGES. NOKIA SHALL NOT BE LIABLE FOR DELAY IN
RENDERING SERVICE UNDER THE LIMITED WARRANTY, OR LOSS OF
USE DURING THE PERIOD THAT THE PRODUCT IS BEING REPAIRED.
11. Some states do not allow limitation of how long an implied warranty
lasts, so the above one-year warranty limitation may not apply to you
(the Consumer). Some states do not allow the exclusion or limitation of
incidental and consequential damages, so certain of the above
limitations or exclusions may not apply to you (the Consumer). This
limited warranty gives the Consumer specific legal rights and the
Consumer may also have other rights which vary from state to state.
12. Nokia neither assumes nor authorizes any authorized service center
or any other person or entity to assume for it any other obligation or
liability beyond that which is expressly provided for in this limited
warranty including the provider or seller of any extended warranty or
service agreement.
13. This is the entire warranty between Nokia and the Consumer, and
supersedes all prior and contemporaneous agreements or
understandings, oral or written, and all communications relating to the
Product, and no representation, promise or condition not contained
herein shall modify these terms.
85
14. This limited warranty allocates the risk of failure of the Product
between the Consumer and Nokia. The allocation is recognized by the
Consumer and is reflected in the purchase price of the Product.
15. Any action or lawsuit for breach of warranty must be commenced
within eighteen (18) months following delivery of the Product.
16. Questions concerning this limited warranty may be directed to:
Nokia Customer Care Center, USA
7725 Woodland Center Blvd., Ste. 150
Tampa, FL 33614
Telephone: 1-888-NOKIA2U (1-888-665-4228)
Facsimile: (813) 249-9619
For the hearing-impaired only (TTY):
1-800-24NOKIA (1-800-246-6542)
17. The limited warranty period for Nokia supplied attachments and
accessories is specifically defined within their own warranty cards and
packaging.
86
call timers 43
18. Index
call waiting 31
answering a waiting call 31
cancelling 31
caller ID 18
showing/hiding number 36
calling card
making calls 33
set-up 31
calls
A
ABC mode 11
accessories 68
batteries 70
chargers 72
covers 69
alarm clock 61
answering a call 17
automatic answer 39
antenna 15
external jack 7
anykey answer 39
automatic answer 39
answering 17
answering automatically 39
answering with call
waiting 31
anykey answer 39
ending 30
forwarding 33
initiating a second 30
making 16
muting 16, 30
silencing an incoming call 17
unmuting 16
B
batteries 70
attaching 3
charging 3
discharging 4
removing 5
blocking calls see restricting
calls
unmuting the
microphone 30
care and maintenance 81
chargers 72
clearing call lists 43
clock 22
alarm clock 61
displaying/hiding 23
setting 22
time format 23
Compact Desktop Charging
Stand 74
C
C key 7
call block see restricting
calls
call forwarding
activating 33
cancelling 34
call log 42
clearing lists 43
dialed calls 43
missed calls 42
Options key 42
received calls 43
call restrictions see
restricting calls
covers, changing 69
cursor 11
D
dialed calls 43
directory see phone book 19
87
messages
E
voice mail 45
missed calls 42
muting the
editing names/numbers 21
email addresses
saving 19
microphone 16, 30
emergency calls 27, 78
emergency key 9 28
erasing names/numbers 21
external antenna jack 7
N
NAM selection 35
names
editing 21
entering 11
erasing 21
finding 17, 20
saving 19
F
factory settings, restoring 41
G
games 62
Navi™ key 6
network feature setting 29
new call 30
numbers
H
help text 8
I
in-call menu 29
editing 21
entering 12
erasing 21
finding 17, 20
saving 19
K
Keyguard 13
keypad lock 13
keys
showing/hiding your own 36
C key 7
Navi™ key 6
power key 6
scroll keys 7
O
on/off 15
one-touch dialing 34
L
P
language 23
lights 7
phone book 19
available memory 21
scrolling view 21
phone lock 67
phone number, choosing
see NAM selection
power key 6
in car kit 23
lock code 63
locking the keypad 13
locking your phone 67
M
profiles see quick
alert settings
making a call 16
memory 21
menu 8
Q
shortcuts 9
quick alert settings 25
88
R
T
Rapid Cigarette Lighter
Charger 73
technical information 82
timers 43
Rapid Travel Charger 73
received calls 43
redial
tones 23
keypad 24
message alert 24
quick alert settings 25
ringing option 24
ringing tone 24
ringing volume 24
warning and game 25
touch tones 39
automatic 22
last number 17
restore factory settings 41
restricting calls 63
ringing see tones
Roaming 37
Roaming indicators 38
saving touch tone strings 40
setting automatic length 40
setting manual length 40
S
safety guidelines 1, 76
safety information 76
scroll keys 7
U
unmuting the
microphone 16, 30
scrolling view 21
security code 63
security features 63
send caller ID 36
Service Types 37
signal strength 15
silencing an incoming call 17
sound see tones
special characters 12
speed dialing see one-touch
dialing
Standard Travel Charger 72
System choices 38
System selection
Roaming 37
V
vibrating alert 25
voice mail messages 45
voice mailbox number 26
voice privacy 34
volume
earpiece 16
ringing 24
W
warranty 83
welcome note 26
system selection 37
89
Para obtener un manual del usuario en español favor de
llamar o enviar un fax al teléfono 1-888-NOKIA2U
(1-888-665-4228), fax 813-249-9619.
90
|