Nokia 3585i User Manual

Nokia PC Suite 4.95  
User Guide  
and  
PC Connectivity Guide for the  
Nokia 3585i phone  
Table of Contents  
[ iii ]  
[ iv ]  
Introduction  
1
1 Introduction  
This guide provides you with the following information:  
Installation instructions for Nokia PC Suite 4.95  
Instructions for using Nokia PC Suite 4.95  
Instructions for using your phone as a wireless modem  
Instructions for configuring your data/fax software  
• OBSERVE SYSTEM REQUIREMENTS  
To install and run Nokia PC Suite 4.95, you need:  
Nokia 3585i phone  
Windows 98 (First or Second Ed.), Windows Millennium Edition (ME), Windows 2000 Professional, or Windows XP (Home or  
Professional)  
At least 50 MB of free disk space  
The optional DKU-5 data cable  
An available USB port on your PC  
A compatible PC Personal Information Manager (PIM) application for use with Nokia PC Sync  
Note: Nokia Content Copier (a component of Nokia PC Suite) supports a variety of Nokia phones, some of which make their  
connection to a PC using a different data cable. For a list of compatible phones and connection methods, please see “Learn  
• LEARN ABOUT COMPATIBLE APPLICATIONS  
Nokia PC Sync is compatible with the Personal Information Manager (PIM) applications listed below:  
Application name:  
Microsoft Outlook  
Outlook Express  
Lotus Notes  
Version  
97, 98, 2000, 2002  
All (using Windows Address Book)  
4.5, 4.6, 5.0  
Lotus Organizer  
97, GS, 5.0, 6.0  
• UNDERSTAND REQUIREMENTS FOR DIGITAL DATA AND FAX CALLS  
Note: This feature is available only if your service provider’s network supports digital data and fax calls (including 1XRTT  
packet data services). Check with your service provider for more information.  
Before you can make digital data and fax calls using your Nokia phone as a wireless modem:  
You must subscribe to digital data or fax services with your service provider.  
Your phone must be powered up, and digital service must be available. Digital data calls are not available when you are outside  
of a digital network.  
Your phone must be connected to your PC using the optional DKU-5 data cable.  
Your data or fax software must be running and must be configured to recognize your Nokia phone as the active modem.  
• PRINT THIS GUIDE  
No other applications should be running during the installation of PC Suite and during wireless modem setup. Therefore, reading  
this guide using Adobe Acrobat reader during installation is not recommended.  
[ 1 ]  
                       
Introduction  
• OBSERVE TERMS  
1
For the purposes of this user guide, the following terms are used:  
Term  
MMS  
PC  
Description  
Multimedia Messaging Service  
Personal computer  
(refers to both desktop and laptop)  
PIM  
ISP  
Personal Information Manager  
Internet Service Provider  
• COMPLY WITH SAFETY NOTES  
Refer to the user guide of the product for instructions on operation, care, and maintenance, including important safety  
information.  
Do not switch on your phone when wireless phone use is prohibited, or when it may cause interference or danger.  
When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible  
products.  
Make backup copies of all important data to protect against possible loss or alteration.  
To avoid any potential loss of data, you should not make or receive calls while synchronizing data between the phone and a PC.  
To disconnect the cable from the phone, hold the connector and remove the cable.  
[ 2 ]  
           
Nokia PC Suite installation  
2 Nokia PC Suite installation  
Nokia PC Suite 4.95 is a collection of powerful tools that you can use to manage your phone features and data. PC Suite consists  
of the following components:  
2
Nokia Content Copier allows you to copy data between two Nokia phones, to back up phone data to your PC, and erase data  
from your phone.  
Nokia Connection Manager allows you to monitor the serial connection between your phone and PC and switch to a different  
type of connection when copying data from one phone to another.  
Nokia Sound Converter is used to convert Standard MIDI Files (SMFs) or General MIDI (GM) files for use with MMS messages  
and as ringing tones for your phone.  
Nokia PC Sync allows you to synchronize contacts, calendar and to-do list notes between your phone and PIM applications  
such as Microsoft Outlook and Lotus Organizer.  
Nokia PC Graphics allows you to create new caller group logos and picture messages or allows you to edit pictures (or picture  
messages) already in your phone.  
Nokia Phone Editor allows you to edit your phone contacts list and settings from your PC.  
Nokia Application Installer allows you to install Java™ applications from your PC to the phone.  
• DOWNLOAD PC SUITE  
The Nokia PC Suite program is provided free of charge, and is available for download from the PC software downloads section of:  
Please download the setup application to a location on your hard drive. If you downloaded the application in segments, please  
double-click the first segment .exe file and follow the instructions to extract the installer application from the segments.  
Install DKU-5 software and hardware  
The Nokia DKU-5 data cable and software drivers provide a means of communication between your phone and PC. The cable and  
software must be installed and configured properly before you can install Nokia PC Suite. Please follow the instructions found in  
the DKU-5 sales package prior to installing Nokia PC Suite.  
Install PC Suite software  
Once the software download is complete and/or the segments have been rejoined:  
1
2
3
4
5
6
7
Double-click the PC Suite installation file that you downloaded to your hard drive.  
If prompted, click Next to accept the default location of the temporary installation files.  
Click Next to begin the software installation.  
Read the end-user software agreement, then click Yes to accept its terms.  
Review the safety notes, then click Next.  
Click Next to install all PC Suite components (or clear the check boxes of the components you do not want to install).  
Select the language you wish to use with PC Suite, then click Next.  
Note: If you use a PIM application (Outlook, Lotus Organizer, etc.) and you want to use it with Nokia PC Sync, it is  
recommended that you select the same language used by your PIM.  
8
9
Follow the installation wizard instructions for establishing a connection between your phone and PC, then click Next.  
Continue through the installation wizard, then click Finish to restart your PC.  
Change language  
The language chosen during installation for PC Suite applies to all of the PC Suite components and Help applications. If you need  
to change PC Suite to a different language, you must reinstall PC Suite.  
• REMOVE PC SUITE  
If you need to remove PC Suite (including all components), please use Add/Remove Programs (located in Control Panel). Remember  
to close any PC Suite applications that are running before you begin.  
[ 3 ]  
                 
Nokia PC Suite installation  
To remove PC Suite 4.95:  
1
2
3
4
5
6
7
Click Start, point to Settings, then click Control Panel.  
Double-click Add/Remove Programs.  
2
Scroll through the list of installed applications, then click Nokia PC Suite 4.95.  
Click the Add/Remove button.  
Click Remove from the Nokia PC Suite Setup window, then click Next.  
Follow the on-screen instructions until the setup wizard has completed removing the program.  
Restart your computer to complete the removal process.  
[ 4 ]  
Nokia Connection Manager  
3 Nokia Connection Manager  
Nokia Connection Manager is a utility that allows you to select or change the type of connection between your phone and PC.  
You may need to use Connection Manager to select the type of connection you want Nokia Content  
Copier to use during various stages of the process. For example, if you are trying to copy data from one  
phone to another and the phone containing the data you want to copy requires an IR connection, click  
Content Copier Connection button to launch Connection Manager. Then select the correct connection  
option for the source phone.  
3
Switch connection type  
1
Establish the appropriate connection between your phone and PC  
(using IR or cable), then double-click the Connection Manager tray  
icon  
(or select the Connection option from a PC Suite application  
menu).  
2
Click the button that corresponds to the desired connection type:  
Cable  
Bluetooth  
Infrared  
Selected/enabled buttons are indicated by their green color.  
Allow Connection Manager to detect your phone.  
Click OK to return to Nokia PC Suite or the desktop.  
3
4
If your phone is not detected within 10 seconds, switch the connection type off, then on again. This action forces Connection  
Manager to detect your phone again.  
Note: If you are copying data from one phone to another and the source phone uses an IR connection, interrupt the IR  
connection between source phone and PC. Allow the Windows warning message regarding interrupted IR communications  
to disappear before changing the connection back to the DKU-5 data cable. By doing so, you allow Connection Manager to  
detect your phone more quickly.  
Important: Even though your Nokia 3585i phone does not support the Bluetooth wireless technology, Bluetooth support  
is included for compatibility with other Nokia phones.  
Disable Connection Manager for wireless modem use  
When you close one of the PC Suite applications, Connection Manager may not always release the COM port assigned to your cable  
or IR connection. Before Windows Dial-up Networking or other data/fax software can communicate with your phone using the  
DKU-5 data cable, you may need to launch Connection Manager and turn off cable communications. This disables automatic  
detection of your phone and releases the COM port for use by other Windows applications.  
To disable Connection Manager, double-click the tray icon  
communications.  
, then click the appropriate buttons to disable cable  
[ 5 ]  
 
Nokia Content Copier  
4 Nokia Content Copier  
Nokia Content Copier is a powerful application that allows you to perform  
the following tasks:  
Copy data from a compatible phone to your Nokia 3585i phone (or  
between two Nokia 3585i phones).  
4
Back up phone data to your PC, then restore the data back to your  
phone.  
Erase data from your phone.  
• LEARN ABOUT COMPATIBLE PHONES  
One of the most powerful features of this application is that it supports other compatible Nokia phones. This capability is especially  
useful if you are upgrading to a new handset and want to transfer data from your old phone to your new one. You can also use  
this application to transfer information between other Nokia 3585i phones.  
The table on the following page shows a list of Nokia phones compatible with Nokia Content Copier (other than Nokia 3585i), as  
well as the method of connection to the PC:  
Nokia model number  
3320/3360  
Method of connection  
IR  
3570/3585  
DKU-5  
5190, 6190  
DAU-9P data cable  
6310i, 6340/6340i, 6360  
6370, 6385  
DLR-3P data cable and IR  
DLR-3P data cable, DKU-6 data cable, and IR  
7160, 7190  
DLR-3P data cable  
8290, 8890  
IR  
IR  
8390  
Important: Content Copier does not support copying data to any of the phones listed above. Data can only be read from  
these phones, then copied to a Nokia 3585i phone.  
Note: Nokia Content Copier does not support certain Nokia 5100 and 6100 series phones. For more information on specific  
• LEARN ABOUT CONTENT COPIER  
Nokia Content Copier uses a wizard-style interface to help you perform  
the tasks listed above. Launch Content Copier from the Start menu  
(Start > Programs > Nokia PC Suite 4 > Nokia Content Copier), then  
select the task you wish to perform. Follow the on-screen instructions  
to complete the selected task.  
You may need to use Nokia Connection Manager to select the type of  
connection you want Content Copier to use during various stages of  
the process. For example, if you are trying to copy data from one phone  
to another and the phone containing the data you want to copy  
requires a data cable, click the Content Copier Connection button to  
launch Connection Manager. Then select the correct connection option  
for the source phone.  
The following pages contain basic information and tips on using Nokia Content Copier.  
[ 6 ]  
             
Nokia Content Copier  
Copy data from the source phone  
When you select Copy data from a phone to a PC, Content Copier transfers  
all compatible data types (contacts list, calendar, to-do, caller groups, etc.)  
from the phone containing the data you want to back up or transfer. This  
phone is called the “source phone” and can be one of the phones listed on  
the previous page, or another Nokia 3585i phone.  
If you are copying phone data and want to save it on your PC, Nokia  
Content Copier guides you through the process of saving the  
information to your PC hard drive.  
4
If you are copying data from a different source to your Nokia phone,  
the data must first be saved to your PC. Once you have connected your  
Nokia 3585i phone (target phone) using the cable, see “Copy  
information to the target phone” for further instructions.  
Save the source phone data  
Once the source phone data is read, save the information to your PC hard  
drive.  
1
2
Click the Save Data button.  
Navigate to the location on your hard drive where you want the  
information stored.  
Nokia Content Copier automatically names the files for you, based on  
the type of data that is read from the source phone.  
3
4
Click Next to complete this process.  
Click New Action to return to the beginning of the Content Copier wizard (to perform a different task), or click Finish to close  
Content Copier.  
Copy information to the target phone  
Before you can copy information to the target phone, you need to load the  
information into PC memory. You should have already saved the source  
phone data to your PC using the Copy data from a phone to a PC option.  
1
2
3
Launch Nokia Content Copier, then click Next.  
Click Copy data from a PC to a phone, then click Next.  
Click the Select Source Folder button, then locate the directory  
containing the information you want to use.  
4
Click Next to begin copying data from your PC to your phone.  
Once the source phone information has been loaded from your PC hard drive, you are asked to determine the types of information  
you want copied into your phone. The compatible data types are displayed along with the ability to select the types of data you  
wish to transfer.  
Use the check boxes next to the data types to select or deselect the information you want to copy to your phone. Click Next to  
begin copying the data to your phone.  
Nokia Content Copier log  
When you have successfully completed one of the Nokia Content Copier tasks, the Finish screen is displayed along with a log of  
the tasks that were just performed. At the Finish screen, you have the following options:  
Click Save to save the log (.log) file to your PC hard drive.  
Click New Action to return to the beginning of the Nokia Content Copier wizard.  
Click Finish to exit Nokia Content Copier.  
[ 7 ]  
                 
Nokia Content Copier  
• LEARN ABOUT OTHER NOKIA PHONES  
Due to software and hardware differences between generations of phone technology, the following phones are not compatible with  
Nokia Content Copier:  
Protocol  
Nokia model number  
TDMA  
5120, 5125, 5160, 5165  
6120/6120i, 6160/6160i/6160m  
6161/6161i, 6162/6162i/6162m, 8260  
4
CDMA  
3280, 3285  
5170/5170i, 5180/5180i, 5185  
6180/6180i, 6185/6185i  
GSM1900  
3390, 3395  
[ 8 ]  
   
Nokia Sound Converter  
5 Nokia Sound Converter  
Nokia Sound Converter allows you to convert Standard MIDI files (.mid) for use with your Nokia phone. Nokia Sound Converter  
also supports several common ringing tone file formats (.ott, .nrt, and .rtpl). Once you convert and transfer these files to your phone  
you can use them with MMS (Multimedia Messaging Service) messaging and as ringing tones. Now you can carry a version of your  
favorite MIDI file as a ringing tone in your phone.  
• LEARN ABOUT MIDI FILES  
The new generation of Nokia phones are equipped with a polyphonic sound (MIDI) playback device (similar to your PC sound card).  
Your phone is capable of producing up to four different instrument sounds at the same time and makes use of a new type of MIDI  
ringing tone format.  
5
Use SP MIDI files  
SP (scalable polyphony) MIDI was designed for use in handheld devices to create more robust ringing tones and MMS melodies.  
The availability of SP MIDI ringing tones continues to increase as more mobile phones and handheld devices support this feature.  
Many popular Internet ringing tone Web sites now offer SP MIDI ringing tones that you can download to your PC. You can use  
Nokia Sound Converter to upload new SP MIDI ringing tones to your Nokia phone.  
Use Standard MIDI Files (SMF)  
You can also use Nokia Sound Converter to modify and convert your favorite songs in Standard MIDI File (SMF) format for use with  
your phone. There are two types of SMFs:  
Type 0 SMF format—one track of MIDI data containing all the various instrument parts; each part is assigned to a different  
MIDI channel (1–16).  
Type 1 SMF format—each instrument has its own dedicated track and MIDI channel (1–16).  
Nokia Sound Converter supports Type 1 files. These Type 1 files are often called General MIDI (GM) files by those manufacturing  
audio devices for home use or for hobbyists (as opposed to devices designed for professional audio applications such as recording  
studios, etc.). GM files use the Type 1 format because the composer of the SMF can designate a particular instrument or sound and  
embed this information in the SMF.  
Since many SMFs contain more voices and instruments than your phone can accommodate, Nokia Sound Converter is designed to  
help you optimize these files for use with your phone.  
• LEARN ABOUT NOKIA SOUND CONVERTER  
Nokia Sound Converter is designed primarily for the  
conversion of SMFs or GM files to SP MIDI files. The main  
Sound Converter tasks include:  
Opening the desired MIDI file  
Setting the priority of the MIDI channels (instruments) to  
be played  
Adjusting the number of notes used per channel  
(polyphony)  
Saving the modified MIDI file to your PC  
Uploading the ringing tone to your phone  
Understand terms and concepts  
The following explanations may prove helpful as you optimize your favorite MIDI files for use with your Nokia phone:  
Channels—Each MIDI instrument (bass, piano, guitar, brass, etc.) is assigned a different MIDI channel (1–16). Note that your  
MIDI file may contain several channels of the same type of instrument (for example, Brass 1, Brass 2, Brass 3, etc.). You may  
need to listen to each channel or instrument to determine which channel you want to use.  
Polyphony—Refers to the number of simultaneous notes that your phone MIDI playback device can play (or the number of  
simultaneous notes per channel required by the GM file). You may need to lower the polyphony value of a channel in order to  
be able to use more channels/instruments in your ringing tone.  
[ 9 ]  
                     
Nokia Sound Converter  
Nokia Sound Converter allows you to optimize your favorite MIDI file by adjusting the priority of the channels (instruments) and  
adjusting the polyphony value of the desired instrument.  
Open a GM file  
To open a GM file for conversion to SP MIDI:  
1
2
3
4
Establish a connection between your phone and PC.  
Launch Nokia Sound Converter, then click Next.  
Use the dialog box to highlight the MIDI file you want to convert, then click Open.  
Confirm that your phone appears as the selected destination, and note the number of simultaneous notes and/or instruments  
your phone can support.  
5
5
Click Next.  
Nokia Sound Converter analyzes your GM file and moves what it determines as the most important instruments to the top of the  
priority list.  
Cumulative polyphony  
shows the running total  
of notes required by  
Your phone plays only  
those instruments  
MIDI file.  
appearing in green.  
Click here to listen to  
the original GM file.  
Note that some instruments require more polyphony than others. In the GM priority list example, Brass 1 requires one note,  
whereas Percussion requires the ability to play two notes simultaneously. Since your phone supports up to four notes  
simultaneously, the use of Brass 1 and Percussion gives you a cumulative polyphony of three notes total. Note that Brass 2 requires  
two notes and causes this MIDI file to exceed your phone playback capabilities. While you still have one additional note available,  
the remaining instruments in the list cannot be played by your phone  
Use Simple Channel Priority options  
If you analyze the cumulative polyphony of the remainder of the instruments, you may discover that some voices require less  
polyphony than others. In the example above, Reed, Ethnic 1, Ethnic 2, and Brass 3 only require one note each. You may want to  
use one or more of the following options to select other instruments for use in your ringing tone.  
LISTEN TO A MIDI CHANNEL  
You can listen to one or more of the MIDI channels to determine if you want to use instruments other than those selected by Sound  
Converter. Highlight the desired MIDI channel (or hold the Ctrl key to select more than one), then click Play Selected Channels.  
CHANGE CHANNEL PRIORITY  
Use the Move Up or Move Down buttons to change the priority of a channel. In the GM priority list example, you may consider  
moving one or more of the channels higher that requires only one note of polyphony (for example, Reed or Ethnic 1). The end result  
is having a wider variety of instrument sounds in your MIDI ringing tone.  
LISTEN TO YOUR MIDI FILE  
You can simulate playback of the MIDI file by your phone while you are editing. Click the Pre-play as Played in Phone button at  
any time to hear how the changes you make to the channel priority affect what you hear.  
[ 10 ]  
 
Nokia Sound Converter  
Use Advanced channel priority options  
One method of increasing the number of different channels (instrument sounds) available to you at a given  
time is to adjust the calculated polyphony value of the channel. However, to do this you must select the  
Advanced option. Click the Advanced conversion button to access the additional conversion options or click  
the Back button and select Advanced).  
In the previous example, the Brass 2 channel contains the main melody of the MIDI file. The Brass 1 channel  
contains the bass part (in this case, played by a tuba sound).  
Number of notes as  
calculated by Nokia  
Sound Converter.  
Number of notes as  
defined by the user.  
5
Used to change the  
calculated polyphony  
value for the selected  
instrument.  
Moving the Brass 2 channel above the Percussion channel sets Percussion to a lower priority. Reducing the polyphony of the  
Percussion channel by one voice brings the cumulative polyphony of the first three channels to four.  
In effect, you have adjusted or scaled the polyphony of your MIDI file to work more effectively with your phone, hence the term  
scalable polyphony. Your phone is now able to play the first three instrument sounds simultaneously.  
Save your SP MIDI file  
Once you have made the necessary adjustments to the GM file, you should save your work. From either the Simple conversion or  
Advanced conversion screens:  
1
2
3
Click Next.  
Click the Save File button.  
Use the Save As dialog box to save your file with a different file name.  
Note that SP MIDI files and GM files use the same file extension (.mid). You may want to choose a new file name so as to distinguish  
the SP MIDI file from the original GM source file.  
Transfer to phone  
When you transfer the SP MIDI file to your phone, the phone stores the file in the Gallery menu. Once you recall the file from the  
Gallery menu, you can assign it as a ringing tone to the currently selected file or attach it to an MMS message. For more  
information on these features, please refer to the phone user guide.  
1
2
3
From the Save dialog, click the Update to phone button.  
Make any changes to the MIDI file title using the Update As dialog box, then click OK.  
Click Finish to return to the beginning of the Nokia Sound Converter wizard, or click the close button to exit the application.  
[ 11 ]  
     
Nokia PC Sync  
6 Nokia PC Sync  
Nokia PC Suite allows you to synchronize the contact and calendar information in your PC Personal Information Manager (PIM)  
software and your Nokia mobile phone. You can use Nokia PC Sync to keep information up to date in both locations.  
PC Sync supports a variety of PIM applications, including Microsoft Outlook, Outlook Express (using Windows Address Book), and  
Lotus Organizer. PC Sync also offers a wide variety of synchronization options so that you can personalize the way you want your  
information managed.  
Warning: To avoid any potential loss of data, you should not make or receive calls while synchronizing data between the  
phone and your PC. Nokia PC Sync cannot be used while a data call is in progress. Likewise, you cannot initiate a data call  
while synchronizing data with PC Sync.  
Important: Remember to make backup copies of all important data to protect against possible loss or alteration.  
6
• CONFIGURE PC SYNC  
The first time you run Nokia PC Sync, you must configure PC Sync to  
work with your PIM application. Once you have customized PC Sync, you  
can proceed with synchronizing your PIM data with your phone.  
1
2
Establish a connection between your phone and PC.  
Launch Nokia PC Sync by clicking Start, point to Programs, point to  
Nokia PC Suite 5, then click Nokia PC Sync.  
3
4
Select your PIM application from the drop-down list, then click OK.  
Click the More button to view a summary of current or default  
settings.  
Set General synchronization properties  
1
2
3
Click the General tab, then select the information you want to  
synchronize.  
Click the desired Automatic Synchronization option (for example,  
Every connection).  
Click the Advanced button to specify additional options, including  
resolving synchronization conflicts.  
Synchronization conflicts  
A synchronization conflict occurs when you change or edit a contact,  
calendar, or to-do list note in both your phone and PIM between  
synchronization sessions. By default, PC Sync resolves the conflict by  
treating your phone as the correct information source.  
To change conflict resolution properties, click the option associated  
with your PIM application.  
Set Calendar and Contacts properties  
Your PIM application storage capabilities are much more extensive than  
those of your phone. Use the Calendar/To-do and Contacts tabs to  
define the kinds and amount of information synchronized.  
For more information about the capacity of the contacts list or calendar  
in your phone, please refer to the technical specifications section of the  
handset user guide.  
1
2
Click the Calendar/To-do tab.  
Use the drop-down lists to define the range of time PC Sync uses  
during synchronization.  
[ 12 ]  
                     
Nokia PC Sync  
3
4
Click the Contacts tab.  
Select the details you want synchronized with your phone.  
Contact deletions  
By default, contacts deleted from your phone are not deleted from your  
PIM when you synchronize. If you accidentally delete a contact from  
your phone, you can restore it by synchronizing again.  
Deselecting the Ignore contact deletions option instructs PC Sync to  
permanently delete the corresponding contact in your PIM. Choose this  
option only when you are certain you want PC Sync to delete the PIM  
contact (and all details) associated with the deleted contacts list entry.  
Deleting contacts list entries cannot be undone!  
6
Set PIM properties  
The last properties tab is labeled with the name of your PIM application. Use this properties tab to modify how PC Sync  
communicates with your PIM resources. For example, if your PC is configured for multiple users, the default location of the  
database with your information may be stored in a user profile directory instead of the default location for a single-user PC. PC  
Sync returns an error message if it cannot find your PIM data.  
Use the PIM properties tab to select the correct location of your PIM databases containing current contacts, calendar, and to-do  
list information.  
Synchronizing for the first time  
Once you have customized PC Sync for your uses you are ready to  
synchronize your phone and PIM.  
1
2
3
4
Click the Summary tab.  
Click the Synchronize Now button.  
Observe the synchronization status indicator.  
Click the OK button when synchronization is complete.  
Important: Please refer to the Troubleshooting document in the event synchronization is not successful or if PC Suite  
notifies you of errors. A link to this document can be found in the Nokia PC Suite 4 Program Group.  
• UNDERSTAND THE BASICS OF SYNCHRONIZATION  
Nokia PC Sync remains running in the background after you synchronize for the first time. PC Sync places an icon in the task bar  
tray to indicate that the application is running. The colors of the icon change, depending on the status of the connection between  
your phone and PC, as shown in this example:  
Yellow and gray indicates no  
connection is present between  
your phone and PC.  
Blue and green indicates a  
connection is present  
between your phone and PC.  
Exit PC Sync  
Once you have completed setup and have synchronized for the first time, you can either leave the program running in the  
background, or exit PC Sync. To exit PC Sync, right-click the PC Sync tray icon  
, then click Exit.  
Start PC Sync  
You have two options for launching Nokia PC Sync:  
As-needed from the Windows Start menu.  
Automatically upon startup.  
[ 13 ]  
                   
Nokia PC Sync  
TO ENABLE PC SYNC ON STARTUP  
1
2
3
Establish a connection between your phone and PC.  
Launch PC Sync from the Start menu.  
Right-click the PC Sync tray icon, then click Enable On Startup  
View other PC Sync options  
There are several other options available from the PC Sync options menu  
(from the tray icon). With the phone connected to your PC, right-click on the  
tray icon, then click any of the following options:  
About—used to view information about the PC Sync program.  
Connection—used to check the status of the PC/phone connection.  
Properties—used to modify current PC Sync settings (change frequency of synchronization, types of data synchronized, etc.).  
Synchronize—used to begin data synchronization.  
6
View Last Report—used to view information about the last synchronization attempt.  
Help—used to launch the on-line Help files.  
Exit—used to close the PC Sync program.  
To disable the auto start features, right-click on the PC Sync icon, then click Enable On Startup again.  
• BEGIN SYNCHRONIZATION  
PC Sync starts synchronization between your phone and PC when you launch the program from the Start menu. To resynchronize  
your data while the program is still running, right-click the PC Sync tray icon, then click Synchronize.  
SYNCHRONIZE USING THE NOKIA DCV-15  
You can also initiate synchronization when your phone is connected to the Nokia DCV-14 Connectivity Desk Stand. With the PC  
Sync program already running, press the synchronization button on the front of the stand.  
For more information on the Nokia DCV-15 Connectivity Desk Stand, please refer to the Enhancements chapter, located in the user  
guide for your phone.  
• USE THE NEW SYNCHRONIZATION COMMAND  
If you upgrade to a newer version or change PIM applications, you must configure PC Sync to work with the new application. Select  
New Synchronization from the Nokia PC Suite program group, then follow the instructions under “Configure PC Sync” on page 12.  
Important: New Synchronization is not the command to use when you want to start PC Sync and initiate synchronization  
between your phone and PC.  
• CREATE A CUSTOM CONTACT LIST  
If you have more contacts in your PIM than your contacts list can hold,  
synchronizing may overload your phone memory.  
Nokia suggests you create a custom contact list or subset of your master  
contact list containing only the information you want in your phone.  
Depending on the PIM application you use, you may need to create a new  
contact database file or create a new folder to store the custom contact list.  
Configure for Outlook users  
Outlook users can create folders and subfolders in their Outlook database  
files. To create a custom contact list, first create a new folder to store  
contacts. Then copy the desired contact information from your main contacts  
folder to the new folder. PC Sync allows you to synchronize your phone with  
the Outlook contacts folder of your choosing.  
[ 14 ]  
                         
Nokia PC Sync  
CREATE A NEW FOLDER FOR PHONE CONTACTS  
1
2
3
4
Click File, point to Folder, then click New Folder.  
Type the name of your new folder (for example, Phone list).  
Click the Folder contains drop-down arrow, then click Contact Items.  
Select a location for your new folder (for example, click Contacts to make  
Phone list a subfolder of the Contacts folder).  
5
Click OK to confirm your selection.  
COPY CONTACTS TO CUSTOM PHONE LIST  
1
Click the Contacts button on your Outlook bar  
.
2
Select the contacts you want to appear in your custom list.  
Hold the Shift key, then click to select multiple contacts adjacent to each other.  
Hold the Ctrl key, then click to select multiple contacts that are not adjacent to each other.  
6
3
4
5
Click Edit, then click Copy.  
You can also press Ctrl + C.  
Select your custom folder from the Folder List (for example, Phone list).  
Or press Ctrl + Y to display Go to Folder dialog box, then select your custom folder.  
Click Edit, then click Paste.to place copies of the selected contacts into the new folder.  
You can also press Ctrl + V to paste.  
Important: If you decide to drag-and-drop contacts between the Contacts folder and the new custom folder, you must  
hold the Ctrl key while dragging, then release the mouse button first. Holding the Ctrl key during drag-and-drop allows  
you to make a copy of all selected contacts in the new folder.  
UPDATE OUTLOOK SETTINGS IN PC SYNC  
To update PC Sync settings and synchronize with your custom list:  
1
2
3
4
5
6
7
Establish a connection between your phone and PC.  
Launch Nokia PC Sync from your PC Start menu.  
Right-click the PC Sync tray icon, then click Properties.  
Click the Microsoft Outlook tab.  
Click the Contacts browse button  
, then select your custom folder.  
Click OK to confirm your selection.  
Click the Summary tab, then click Synchronize Now to synchronize your  
phone and custom phone list.  
Configure for other PIM applications  
Some PIM applications (such as Lotus Organizer) require a new database file for your custom contacts list. Once you create a new  
database file, copy the desired contact information from your main database to the new contacts database file. Use the PC Sync  
settings to choose the database file containing only the information you want to use in your phone.  
CREATE A NEW LOTUS ORGANIZER DATABASE FILE  
1
2
3
With Lotus Organizer running, click File, then click New.  
Click File, then click Save As.  
Enter a name for your custom phone list (for example, Phone list).  
COPY CONTACTS TO CUSTOM PHONE LIST  
1
2
3
From the Lotus File Manager, open your default Organizer database (c:\lotus\work\organize\<filename>).  
Click the Contacts tab, then click the desired alphabet tab.  
Select the desired contacts for your custom list.  
Hold the Shift key, then click to select multiple contacts adjacent to each other.  
Hold the Ctrl key, then click to select multiple contacts that are not adjacent to each other.  
[ 15 ]  
   
Nokia PC Sync  
4
5
Continue by clicking subsequent alphabet tabs and selecting the  
desired contacts.  
Click the Copy button.  
Selected  
records  
You can also press Ctrl + C.  
6
7
Use the Windows Task Bar to switch back to your new contacts  
list, then click the Contacts tab.  
Click the Paste button to place copies of the selected contacts  
into the new list.  
You can also press Ctrl + V to place copies of the selected  
contacts in the new list.  
UPDATE PC SYNC SETTINGS FOR LOTUS ORGANIZER  
1
Establish a connection between your phone and PC.  
2
Launch Nokia PC Sync from the Start menu.  
If you have PC Sync enabled on startup, right-click the PC Sync tray icon, then click Configuration.  
Click the Lotus Organizer tab.  
6
3
4
5
6
Click the Contacts browse button  
, then select your custom folder.  
Click OK to confirm your selection.  
Click the Summary tab, then click Synchronize Now to synchronize your phone  
and custom phone list.  
[ 16 ]  
Nokia PC Graphics  
7 Nokia PC Graphics  
Important: Nokia PC Graphics is intended for use with the Nokia 3585i phone that supports picture messaging and caller  
group logos. Please check with your service provider for availability of these services in your area.  
Nokia PC Graphics is a program that allows you to create and edit picture messages, as well as graphics that can be used for picture  
messaging. You can also create and edit new caller group logos.  
Once you create or modify a graphic, you can transfer it to your phone (using the DKU-5 data cable). You can also save your work  
to disk to use later, or to share using e-mail with others who also use a compatible version of PC Suite. You can also send the  
picture messages using SMS to other compatible Nokia phones that support these features.  
• TOUR OF PC GRAPHICS  
This illustration introduces you to PC Graphic tools and commands:  
Read logo or picture  
message from phone  
Transfer logo or picture  
message to phone  
7
File management  
(new, save, open)  
Click to change  
graphic type (caller  
group logo or  
picture message)  
Drawing area  
Drawing tool  
Enter text for picture  
message here  
Preview of picture  
message or caller  
group logo  
Status bar  
displays help  
texts and  
Displays graphic type and size  
Connection status  
toolbar tips  
• CREATE A NEW GRAPHIC  
Nokia PC Graphics provides easy to use drawing tools to create unique caller group logos or picture messages. Before you begin  
drawing, select the type of graphic you want to create.  
Important: You do not need to establish a connection between your phone and PC to create a new graphic. You only need  
to establish a connection when preparing to send the new logo or picture message to your phone (or as an SMS to another  
user).  
Choose a picture type  
1
Click Start, point to Programs, point to Nokia PC Suite 4, then click Nokia PC Graphics.  
2
Click Tools, point to Picture type, then click one of the following options:  
Group logo—is used to create new caller group logos.  
Picture message—is used to create picture messages.  
If you select Picture message, use the Size option from the Tools menu to select the size of the picture used in the picture message.  
Tip: Selecting the larger picture size reduces the number of characters that accompany the picture message (maximum of  
121 characters).  
[ 17 ]  
           
Nokia PC Graphics  
Draw a new picture  
The type of picture you select determines the size and overall dimensions of the drawing area. The drawing  
area is divided into blocks that can be filled in to create the new picture.  
Your cursor becomes a pencil that you can use to fill in each block. Use the left mouse button to fill each  
block with black. If you make a mistake, use the right mouse button to erase (or fill the block with white).  
Save a picture  
PC Graphics allows you to save your work as a file on your PC hard drive. Saving your logos and picture messages to your hard drive  
creates a backup copy of your work. You can also save your work, then open the file later to edit or to send the picture message or  
logo to your phone.  
Tip: PC Graphics automatically selects the correct file type based on the picture type you selected. File types supported are:  
Picture message files (*.gms), OTA Bitmap Files (*.otb), and Bitmap files (*.bmp).  
1
2
3
Click the Save button on the toolbar, or select the Save command from the File menu.  
Select a location to save your work, then enter a name for your picture.  
Click Save to complete the task.  
7
• TRANSFER A GRAPHIC TO YOUR PHONE  
Once you create a logo or picture message on your PC, you can transfer the information to your phone using your cable connection.  
Make sure you establish a connection between your PC and phone before you begin.  
Transfer a group logo to your phone  
1
Click the Update to phone button  
phone command from the Tools menu.  
on the toolbar, or select the Update to  
2
Click the name of the caller group from the list of logos (for example, Other).  
The logo you created replaces the existing logo for the selected caller group.  
On your phone, press Names, scroll to Caller groups, then press Select.  
Scroll to the caller group you selected in step 2, then press Select.  
Scroll to Group logo, then press Select.  
3
4
5
6
Scroll to View, then press Select to confirm the transfer of the logo to your phone.  
Transfer a picture message to your phone  
1
Click the Update to phone button  
phone command from the Tools menu.  
on the toolbar, or select the Update to  
2
Click one of the existing picture message locations from the list, or select First  
empty location.  
The picture message you created in PC Graphics replaces the existing message  
in the location you selected.  
3
Press Menu 0-1-1-4 (Messages > Text messages > Archive), then press Open.  
If you select First empty location, the new picture message appears in your  
phone Archive folder for use at a later time.  
Note: For more information on saving pictures in your phone, please refer to the user guide for your phone.  
• WORK WITH AN EXISTING GRAPHIC  
PC Graphics allows you to edit any of the picture messages already in your phone. You can also open and modify logos and picture  
messages saved on your PC. Make sure you establish a connection between your PC and phone before you begin.  
Edit a picture message stored in your phone  
With the Nokia PC Graphics application running:  
1
2
Establish a connection between your phone and PC.  
Click Tools, point to Picture type, then click Picture message.  
[ 18 ]  
         
Nokia PC Graphics  
3
4
5
Click OK (as needed) to confirm any change in picture size required by Nokia  
PC Graphics.  
Click the Read from phone button  
, or select the Read from phone  
command from the Tools menu.  
Select the picture message or picture you want to edit from the list, then click  
Read.  
Once the picture message has been loaded into your PC from your phone, use the  
pencil tool to edit the image. Click the Update to phone button on the toolbar to  
transfer the logo back to your phone.  
Open a graphic you created  
You may want to save picture messages or caller group logos on your PC so you can send them to other users at a later time. Click  
the Open button  
on the toolbar, or select Open from the File menu, to locate a graphic saved to your PC. You can then edit  
the graphic (as necessary) or transfer the graphic to your phone.  
• OPEN OTHER BITMAP FILES  
Nokia PC Graphics has the ability to open and convert  
Windows RGB-coded bitmap images for use with picture  
messaging and caller group logos.  
Capture area  
7
Nokia PC Editor provides tools to select or capture the  
portion of the image you want to use, and to adjust the  
image and convert it to black and white for use in your  
phone.  
Halftone  
adjustment  
UNSUPPORTED FILE FORMATS  
If the image you want to use is not Windows bitmap  
format (.bmp), you need to use another graphics  
application and convert the image to bitmap format.  
Edit button  
Capture an image  
Because of the size and dimension requirements of picture messages and caller group logos, you may only be able to use a portion  
of your image. Using the cursor, you can highlight or capture that portion of the image you want to use.  
PC Graphics captures your image at the correct height and width, based on your selection of Group logo or Picture message from  
the Tools menu.  
With the Nokia PC Graphics application running, complete these steps:  
1
2
3
Click Tools, point to Picture type, then select the type of graphic you want to create (Group logo or Picture message).  
Click OK (as needed) to confirm any picture size change required by PC Graphics.  
Click the Open button  
on the toolbar, or select the Open command from  
the File menu.  
4
Click the File of type drop-down arrow at the bottom of the Open dialog box,  
then click Bitmap Files (*.bmp).  
5
6
7
Locate and select the image you want to use, then click Open.  
Move the mouse pointer over the drawing area until the pointer changes to crosshairs.  
Click and hold the left mouse button, then drag your mouse to draw a rectangle around the area you want to capture.  
Tip: Once you define the capture area, you can still adjust the height and width using standard Windows resizing  
techniques. Move the cursor over the border of the capture area until the cursor shape changes, then drag to resize.  
Adjust and edit image  
A half-tone (black and white) preview of your selection appears in the lower right corner of the PC  
Graphics window. Use the slider to adjust the image for clarity and quality, observing how PC Graphics  
converts the color information to black and white.  
Once you are satisfied with the quality of the captured image, click the Edit button. You can now make  
further edits to the image, or transfer the graphic to your phone.  
[ 19 ]  
           
Nokia Application Installer  
8 Nokia Application Installer  
Nokia Application Installer allows you to upload and install Java applications from  
your PC or laptop computer to your phone. When you install compatible J2ME  
applications to your phone, you add functionality to your phone, including, for  
example:  
New games  
Stock portfolio manager  
World clock  
Currency converter  
You can use Nokia Application Installer to install applications you download to  
your PC from the Internet, including those downloaded from your service provider’s  
Web site. Or you can also install applications that you program yourself with the  
appropriate Java software developer toolkit.  
Important: Only download and install software from sources you trust. Please take the necessary precautions to protect  
against viruses and other harmful software. Nokia Application Installer uses digital signatures and certificates during  
software installation. Do not install an application if Nokia Application Installer displays a security warning about the  
software you are trying to install.  
• LEARN ABOUT JAVA APPLICATIONS  
8
Java applications consist of two files and can be identified by the (.jad) and (.jar) file extensions. When you download Java  
applications to your PC for use with your phone, make sure you save both files to the same location. If Nokia Application Installer  
cannot find the (.jar) file, a dialog box opens and prompts you for the location of the file.  
• INSTALL AN APPLICATION  
1
2
3
4
5
Establish a connection between your phone and PC.  
Launch Nokia Application Installer.  
Click the Install button  
, or select the Install command from the File menu.  
Locate and select the .jad file saved on your PC, then click Install.  
Observe the progress indicator as the application is installed. Click OK to complete the installation process.  
• ERASE AN APPLICATION FROM YOUR PHONE  
Your phone has a limited amount of memory for Java applications. For example, you may need to erase old or unused Java  
applications (or other entries that share memory space) to make memory available for new applications. To erase an existing Java  
application:  
1
2
3
4
Press Menu 1-0-1 (Applications > Select app.).  
Scroll to highlight the application you wish to erase, then press Options.  
Scroll to Delete, then press Select.  
Press OK to complete the process.  
Note: Please refer to your phone user guide for more information on your phone memory architecture and memory sharing  
feature.  
• LEARN ABOUT MULTIPLE PHONES  
If you have multiple compatible phones connected to your PC (using both IR and cable connections simultaneously), make sure you  
select the correct phone when installing your new application. Click the Select phone button  
on the toolbar, then choose  
the correct phone from the list.  
[ 20 ]  
         
Nokia Phone Editor  
9 Nokia Phone Editor  
The Nokia Phone Editor program allows you to edit and manage many phone functions from your PC. Phone Editor consists of the  
following components:  
Contacts—used to manage contacts list entries and to store contact information on your PC  
Settings—used to view and modify many system and message settings and store or configure your personal business card  
information  
Make sure you establish a connection between your phone and PC before using Phone Editor. If your phone is not connected to  
your PC, you cannot edit and manage your phone information and settings.  
Important: Phone Editor cannot be used during active digital data or fax calls. Do not try to use these two features  
simultaneously.  
• LEARN ABOUT PHONE MEMORY AND PC STORAGE LOCATIONS  
Phone Editor uses your phone memory and your PC (RAM memory and hard drive storage) to store your phone data and settings.  
Each time you launch Phone Editor, phone numbers and various phone settings are read into Phone Editor memory. When you  
terminate the PC connection or exit the program, your phone information is stored on your PC. The next time you use Phone Editor,  
the information stored on your PC is updated.  
• TOUR NOKIA PHONE EDITOR AND CONTACTS WINDOW  
9
This illustration introduces you to Nokia Phone Editor Contacts tools and commands:  
New contact  
Editing tools (cut,  
copy, paste, delete)  
Contact card viewer  
Navigation bar  
Contacts directory  
(list of folders or  
locations where  
List of contacts list  
entries for the  
selected folder.  
contacts are stored)  
Memory status  
Status bar displays  
help texts and toolbar  
tips  
Connection status  
[ 21 ]  
         
Nokia Phone Editor  
• MANAGE CONTACTS USING PHONE EDITOR  
Once you launch Nokia Phone Editor, click the Phone folder  
in the contacts  
directory. A list of all contacts list entries is displayed in the pane to the right of the  
contacts directory.  
Many of the Phone Editor commands are available from the program shortcut menu.  
Select a contacts list entry to edit, then right-click to display a list of the menu  
options available from the shortcut menu. Select the command you wish to perform  
from the list.  
You can also find the same commands in the program Contact and Edit menus, or  
you can use the available toolbar buttons.  
Add a new contact  
1
2
3
Click the New Contact button  
on the toolbar, or select New Contact from the shortcut menu.  
Enter the name of the new contact, then press Tab.  
Enter the phone number, then press Enter to save your work.  
Add additional information to a contact card  
Your phone memory can store up to five phone numbers per name and up to  
four text fields (e-mail address, postal address, etc.). Once you create the  
initial contact card, click the Add entry button on the contact card. The Add  
Entry to Contact Card screen appears.  
9
1
Click the Type drop-down arrow, then select the type of data you want to  
add from the list.  
2
3
4
5
Press Tab, then enter the information in the Data field.  
Click Add and Create to save the data.  
Repeat steps 1—3 to add additional data.  
Click OK only when you have finished editing the selected contact.  
Important: If you enter data, then click OK, the information you entered is not saved. You must click Add and Create for  
the new information to be added to the contact card. Click OK only when you want to return to the contact card viewer.  
ADD NUMBERS OR INFORMATION TO AN EXISTING CARD  
To add additional numbers or other information to an existing contact card:  
1
2
Select the contact to edit from the list.  
Click the Add Entry button, then follow the instructions above to add  
new information to the selected contact card.  
Edit contact information  
1
Select the contact to edit from the list, then click the contact name (or number) in the contact card viewer.  
2
Make the necessary changes, then press ENTER to save your changes.  
Delete a contact  
Click the contact you want to delete from the list, then click the Delete button  
on the toolbar.  
OR  
Right-click the contact you want to delete, then click Delete from the shortcut menu.  
Copy and move contacts  
Your PC hard drive offers you virtually unlimited storage space for names and numbers. You can copy contacts list entries to the  
Phone Editor PC folder  
other entries.  
to back up your data. Or you can move entries to the PC folder, making more memory available for  
To copy or move contacts:  
1
2
Click the folder containing the contacts you want to copy or move (for example, Phone  
Click the contact you wish to copy or move.  
).  
[ 22 ]  
           
Nokia Phone Editor  
Hold the Shift key, then click to select multiple contacts adjacent to each other.  
Hold the Ctrl key, then click to select multiple contacts that are not adjacent to each other.  
3
4
Click the Copy button  
to copy the selected contacts, or click the Cut button  
to move the selected contacts.  
Click the folder where you want the contacts stored, for example, PC folder  
.
Add a contact to a caller group  
You can use Phone Editor to assign contacts list entries to one of the available caller groups. If you are unfamiliar with the caller  
group feature, please see your phone user guide.  
1
2
3
Right-click the contact you wish to assign to a caller group, then click Caller Group.  
Click the drop-down arrow, then click the desired caller group.  
Click OK to change the caller group assignment.  
• EDIT SETTINGS  
You can use the Nokia Phone Editor Settings application to view and  
edit a variety of phone settings, as well as configure how Phone Editor  
handles items you delete. The Settings application divides all of the  
settings into three properties tabs, as follows:  
General—is used to specify how you want Phone Editor to process  
deleted items  
Accessories—is used to modify how the various accessories work in  
conjunction with phone profiles  
User—is used to edit and store your user information  
9
• LAUNCH OTHER PC SUITE APPLICATIONS  
The Phone Editor navigation bar contains buttons that can be used to launch the other PC Suite applications. Use these buttons  
while in Phone Editor to launch PC Graphics, PC Sync, or Content Copier.  
[ 23 ]  
           
Wireless modem setup  
10 Wireless modem setup  
Important: Your Nokia 3585i phone can function as a wireless modem only if your service provider’s network supports  
1XRTT or circuit-switched data (CSD) digital data and fax services. A subscription to these services may also be necessary.  
Please check with your service provider for more details.  
Your phone can function as a wireless modem when connected to your PC. Once your phone is installed and configured properly,  
your phone works in conjunction with your existing data and fax software, allowing you to connect to a corporate network, the  
Internet, or check e-mail wherever you are.  
• LEARN ABOUT DIGITAL DATA  
Circuit switched data (CSD)  
Until now, your only wireless data option has been your service provider’s CSD network. Using CSD, you create a virtual circuit  
between your phone (as a wireless modem) and your Internet service provider (ISP), corporate network, or a fax machine.  
As long as a digital data or fax call is active, you are typically being billed for the air time (whether you are transmitting/receiving  
data or not). The fastest CSD data rate available is 14.4 kilobits per second (kb/s).  
Quick net nonnect (QNC)  
A quick net connect (QNC) digital data call allows you to connect to the Internet more quickly than a traditional CSD call. This is  
achieved because your wireless service provider supplies the local connection to the Internet (instead of your local ISP dial-up  
number).  
Like CSD calls, you are typically being billed for the air time (whether you are transmitting/receiving data or not). The fastest QNC  
data rate available is 14.4 Kbps.  
1XRTT/3G packet data  
Your Nokia phone is the first in a new generation of phones to take advantage of a new higher-speed data protocol called 1XRTT  
(1X). The benefits to you include:  
10  
Higher data transfer rates—data rates up to 153.6 kb/s over the wireless network.  
Data on-demand—data transferred only when requested;billing typically based on the amount of data you transfer.  
1X packet data services work much the same way as a PC connected to a corporate network. Information is sent in bursts or packets  
only when there is a request for information. Otherwise, the PC or phone remains in an idle state.  
Internet access using your wireless service provider  
Your wireless phone service provider now becomes your Internet service provider when you use your phone as a wireless modem  
and use 1XRTT packet data or QNC. You no longer have to configure your laptop computer or handheld device for connection to  
your normal ISP when you want to browse the Web or check your e-mail.  
Access corporate network and e-mail using a VPN  
Virtual private network (VPN) services provide an encrypted communications tunnel through the Internet, creating a secure  
connection between your PC and corporate networks using a high-speed or broadband Internet connection.  
If you plan on using 2G or 3G packet data services to access your corporate network e-mail system, Intranet, or LAN, your corporate  
network must have VPN services available. In addition, your network administrator must grant you permission to access the  
corporate network through the VPN.  
Additional software on your PC (or modification of your PC network settings) may also be required. For more information on VPN  
services, please contact your network administrator.  
Important: Some ISPs may not permit access to certain services from Internet connections outside of your ISP domain, for  
example checking or sending e-mail and newsgroup access. Therefore you may not be able to use 2G or 3G packet data in  
conjunction with some of your home ISP services. Please contact your ISP for more information on accessing their services  
from outside their domain.  
Determine type of data services to use  
Your phone supports all of data services listed above. There are times when it may be advantageous or appropriate to use one type  
of data service over another.  
[ 24 ]  
                   
Wireless modem setup  
1XRTT/3G PACKET DATA  
You may consider using 1XRTT/3G packet data when:  
You have large amounts of data to transfer and time or speed is a factor.  
You are traveling and want to surf the Web or check e-mail using a wireless Internet connection. Because your service provider  
is your Internet access point, you do not have to search for the local dial-up number of your home ISP.  
QNC OR 2G PACKET DATA  
You may consider using QNC data or 2G packet data when you are traveling and want to surf the Web or check e-mail using a  
wireless Internet connection. Because your service provider is your Internet access point, you do not have to search for your regular  
ISP local dial-up number.  
CIRCUIT SWITCHED DATA  
You may need to use CSD data when:  
You send a fax to a machine connected to a traditional phone line.  
You do not have VPN access to your corporate LAN, Intranet, or e-mail system.  
Your ISP does not allow access to their services from outside their domain.  
• OBSERVE THE FOLLOWING REQUIREMENTS  
Before making or receiving digital data or fax calls:  
You must subscribe to digital data and fax services with your service provider.  
Your phone must be powered up, and you must be in a digital network. Do not switch the phone on when wireless phone use  
is prohibited or when it may cause interference or danger.  
The DKU-5 data cable must be connected and working properly.  
You must establish a connection between your PC.  
10  
You must already have installed your phone as a modem.  
Your data software must be running and configured to recognize your Nokia phone as the active modem.  
• UNDERSTAND MODEM SOFTWARE  
During the modem installation process, Windows looks for software specific to the new device being installed. The modem software  
(similar to a device driver) for your phone must be downloaded from the PC software downloads section of the Nokia Web site:  
Since the Add New Hardware Wizard for all Windows operating systems searches the A:\ drive for software or device drivers first,  
Nokia recommends that you save it to a floppy diskette.  
Note: If you choose to save the file to your hard drive, please make note of the path to the file as this information is required  
to complete the installation successfully. Depending on your operating system, locating this file on your hard drive may add  
additional steps to the installation process.  
The Nokia Web site contains the modem software for your phone:  
nmpCDMA1xRTT.inf  
Choose the correct type of digital data  
When installing this software, you are prompted for the type of digital data services you want to use (as well as the COM port  
associated with the DKU-5 data cable):  
Nokia CDMA 1XRTT 2G Packet Data Modem is used for 2G packet data (see your service provider for more information and  
availability of 2G packet data).  
Nokia CDMA 1XRTT 3G Packet Data Modem is used for 1XRTT packet data (see your service provider for more information  
and availability of 3G packet data).  
Nokia CDMA 1XRTT Data Fax Modem is used for CSD and QNC digital data and fax calls (see your service provider for more  
information and availability of CSD and QNC data services).  
[ 25 ]  
           
Wireless modem setup  
• INSTALL THE MODEM  
Important: You must follow the DKU-5 installation instructions found in the DKU-5 sales package prior to completing the  
following steps.  
1
2
Connect the DKU-5 data cable to an available USB port on your computer.  
Connect the DKU-5 cable to your Nokia phone.  
Your phone displays a message indicating you have connected the data cable  
successfully, then returns to the Start screen.  
3
4
From the Windows Control Panel, double click the Modems (98/ME) or Phone and  
Modem Options (2000/XP) icon.  
Click Add.  
For Windows 2000/XP users, click the Modems tab, then click Add.  
Select the Do not detect my modem... option, then click Next.  
Click Other if asked about a PCMCIA modem, then click Next.  
This screen may not appear on all systems.  
5
6
7
8
Insert the floppy diskette containing the .inf file in your drive now.  
Click the Have Disk button.  
Confirm that A:\ is the location of the nmpcdma1xrtt.inf file, then click OK.  
9
Select the correct modem for the type of data services you plan on using (for example, Nokia CDMA 1XRTT 3G Packet Data  
Modem for 3G packet data), then click Next.  
10  
10 Select the COM port assigned to the DKU-5 cable, then click Next.  
For DKU-5  
The Wizard indicates it has located the correct software for your phone.  
If you cannot remember the COM port assigned to the DKU-5 data cable during the installation process, refer to Windows  
Device Manager.  
11 Click Yes to continue the installation if Windows presents the Digital Signature Not Found message.  
12 Click Finish when Windows informs you that the device is installed successfully.  
[ 26 ]  
 
Wireless modem setup  
13 Verify that your Nokia phone appears in the list of modems.  
Complete the process by configuring your data software to work with the new modem configuration. For more information, see  
• CHANGE DATA SERVICES  
If you plan on using more than one type of digital data services, you need to modify the existing modem properties so your phone  
can make the correct type of data connection.  
Advanced properties  
Your phone can configure itself for the correct type of data through the use of standard Hayes-compatible AT commands. Please  
make a note of the following AT command strings:  
Type of data  
CSD and QNC  
2G packet data  
3G packet data  
Initialization string  
AT+CRM=0;+CSO=12  
AT+CRM=1;+CSO=15  
AT+CRM=1;+CSO=33  
Before making a digital data or fax call, make sure the correct initialization string appears in the Extra Initialization commands  
field, located in the Advanced Properties screen:  
10  
Important: If you installed your phone as Nokia CDMA 1xRTT 3G Packet Data Modem and want to make a 3G packet data  
call, no additional settings are required. The AT commands are only required when you want to make a data call different  
than the type of data you selected during modem installation.  
1
2
3
4
Establish a connection between your phone and PC.  
From the list of installed modems, click Nokia CDMA 1xRTT 3G Packet Data Modem, then click Properties.  
Click the Advanced tab.  
Enter the initialization string for the type of data call you wish to make, then click OK.  
[ 27 ]  
   
Data and fax software setup  
11 Data and fax software setup  
Before you can use your phone to send and receive digital data and fax calls, you must configure your data software so that it uses  
your phone rather than your existing modem. You may consider creating a separate set of dialing properties to use when your phone  
is connected to your computer, rather than changing any existing settings.  
• OBSERVE THE FOLLOWING REQUIREMENTS  
Before making or receiving digital data or fax calls:  
You must subscribe to digital data and fax services with your service provider.  
Your phone must be powered up, and you must be in a digital network. Do not switch the phone on when wireless phone use  
is prohibited or when it may cause interference or danger.  
The DKU-5 data cable must be connected and working properly.  
You must establish a connection between your PC.  
You must already have installed your phone as a modem.  
Your data software must be running and configured to recognize your Nokia phone as the active modem.  
• USE MICROSOFT DIAL-UP NETWORKING FOR PACKET DATA (2G, 3G) AND QNC  
You can use Windows Dial-up Networking to connect to the Internet through your wireless service provider. However, instead of  
dialing a traditional phone number, the dialing string to access the packet data network or QNC network is, for example:  
#777  
Check with your wireless service provider for the exact dialing string needed and for your username and password (if required).  
Create a new connection (Windows 98/ME)  
1
Double-click the My Computer icon, then double-click the Dial-up Networking folder.  
For Windows 2000 and Windows ME users, click Start, point to Settings, then click Dial-up Networking.  
Double-click the Make New Connection icon.  
11  
2
3
4
Type a name for your new connection (for example, Internet-3G Packet Data).  
Click the drop-down arrow and select your Nokia phone as the modem to use, then click Next.  
5
Enter the packet data or QNC network access code, for example, #777, then click Finish.  
You may need to remove area code information so only the access code appears.  
Create a new connection (Windows 2000)  
1
2
3
Click Start, point to Settings, then click Network and Dial-up Connections.  
Double-click Make New Connection, then click Next to begin the Network Connection Wizard.  
Verify that Dial-up to private network is selected, then click Next.  
[ 28 ]  
                       
Data and fax software setup  
4
Select only your Nokia phone as the active modem, then click Next.  
5
6
7
Enter the network access code (for example, #777), then click Next.  
Select the connection availability, then click Next.  
Type a name for your new connection (for example, Internet-3G Packet Data), then click Finish.  
Your new Dial-up Networking connection is now ready for use. You may need to update or remove information found in the User  
name field prior to creating a 1XRTT connection.  
Create a new connection (Windows XP)  
1
2
3
Click Start, then click Control Panel.  
Double-click Network Connections.  
Click Create a new connection in the Network Tasks pane, then click Next to begin the New Connection Wizard.  
11  
4
5
6
7
8
9
Verify that the Connect to the Internet option is selected, then click Next.  
Click the Set up my connection manually option, then click Next.  
Click the Connect using a dial-up modem option, then click Next.  
Select only your Nokia phone as the active modem, then click Next.  
Type a name for your new connection (for example, Internet-3G Packet Data), then click Next.  
Enter the network access code (for example, #777), then click Next.  
10 Enter the username and password as supplied by your wireless service provider (as required).  
11 Cancel any of the options on the Internet Account Information that you do not need, then click Next.  
12 Click Finish to complete the Wizard.  
Connect to the packet data or QNC network  
1
2
3
Establish a connection between your phone and PC.  
Double-click the new connection (for example, Internet-3G Packet Data).  
Supply user name or password (as needed), then click Connect.  
Your phone displays Creating packet data connection while establishing a connection. Once a successful connection has been  
made, the status indicator appears in the upper left corner of the phone screen. Your Windows operating system displays  
its normal series of authentication messages while the connection is being established.  
[ 29 ]  
   
Data and fax software setup  
• CONFIGURE AOL FOR PACKET DATA OR QNC  
You can use the packet data network to access your AOL account. However, instead of using the AOL dial-up number, you connect  
using the AOL TCP/IP connection option. The following instructions are based on America Online (AOL) version 6 software (or  
newer). For more information on your AOL software, visit: http://www.aol.com.  
Configure AOL for TCP/IP access  
1
2
3
4
From the AOL Sign On screen, click SETUP.  
Click Expert Setup, then click the Locations tab.  
Click the Add Location button.  
Enter a name for this location (for example, TCP/IP for packet data).  
5
For Windows 98/ME users, click the Add a custom connection option, then click Next.  
For Windows 2000/XP users, click the Select a connection using one of these available devices options, then select the TCP/  
IP option from the drop-down list. Click Next.  
6
7
8
Enter a name for this type of connection in the Add number (Connection) screen (for example, 1X).  
Verify that TCP/IP is the type of connection selected, then click OK.  
Click Close to close the Connection Setup window.  
11  
Connect to AOL  
1
2
3
4
Double-click the Dial-up Networking configuration you created for packet data (for example, Internet-packet data).  
Click Connect and establish a connection to the Internet.  
Launch the AOL program.  
Select the TCP/IP location option from the drop-down list on the Sign On screen (for example, TCP/IP for packet data), then  
click SIGN ON.  
AOL should now connect using your wireless service provider’s Internet access.  
• USE MICROSOFT DIAL-UP NETWORKING FOR CSD  
You may be using Windows Dial-up Networking feature to connect to your Internet service provider or to make a remote  
connection to your corporate network (including corporate e-mail server using Microsoft Outlook or Lotus Notes).  
Rather than altering the existing configurations you use when dialing with your existing modem, consider creating a new  
connection exclusively for use with your Nokia phone (as detailed below).  
Gather configuration information  
You need the phone number for your Internet service provider or for your company remote access server. When testing the new  
connection, you also need your user name and password. You may also be required to enter additional configuration information  
such as a domain name or IP addresses for DNS servers. Your Internet service provider or corporate help desk should supply you  
with all the information you need.  
[ 30 ]  
           
Data and fax software setup  
Create a new connection  
Begin with the instructions for creating a Dial-up Networking connection for a 1XRTT data call. Depending on your computer  
To complete the process:  
1
2
3
Enter the phone number for your local ISP or corporate network.  
Complete the Dial-up Networking Wizard, then click Finish to save the new configuration in your Dial-up Networking folder.  
Configure any necessary network parameters for this connection prior to dialing (IP address of DNS or WINS, etc.) by clicking  
the Properties button.  
You can also right-click the new Dial-up Networking icon, then click Properties.  
Note: For more information on configuring your network connection, please consult your Internet service provider or your  
company help desk.  
Connect to the network  
1
2
3
Double-click the new connection (for example, Internet-Nokia CSD).  
Enter your user name and password, then click Connect.  
Your phone displays Connecting... while establishing a connection.  
Once a successful connection has been made, Data call appears on the phone screen. Your Windows operating system displays its  
normal series of messages while the connection is being established and verified.  
• CONFIGURE AOL FOR CSD  
Your AOL software can be configured to use your phone as a wireless modem for a CSD digital data call. Windows 98/ME users,  
continue with the instructions to follow. Windows 2000/XP user, skip to “Modify AOL Locations” on page 32.  
Modem setup (windows 98/ME)  
To add your Nokia phone as a new modem to the AOL connection setup:  
11  
1
2
3
4
5
6
7
From the Sign On screen, click SETUP.  
Click Expert Setup, then click the Devices tab.  
Click the Expert Add button.  
Verify that Modem (telephone line connection) is selected as the type of connection device you want to add, then click Next.  
Select the generic modem option (for example, Standard (Hayes Compatible)) from the list of modems.  
Select the COM port assigned to the DKU-5 data cable.  
Set the port speed to 14400 bps, then click OK.  
[ 31 ]  
           
Data and fax software setup  
Modify AOL Locations  
Now that your phone is configured for use by the AOL software, you need to modify your  
Locations settings to use your phone as the active modem.  
1
2
3
From the Connection Setup screen, click the Locations tab.  
Double-click the number for the location you wish to use with your phone.  
Click the Connect using drop-down arrow.  
Windows 98/ME users, click Modem: Standard (Hayes compatible) on COMnn (where nn is COM port assigned to the DKU-  
5 data cable).  
Windows 2000/XP users, click Nokia CDMA 1XRTT Data Fax Modem.  
4
Click the Speed drop-down arrow, then click 14400 bps (Windows 98/ME only).  
5
Click OK to confirm your changes, then click Close to return to the Sign On screen.  
• LEARN ABOUT OTHER DATA APPLICATIONS  
11  
Several other types of telecommunications applications can be used with your wireless phone and your computer, including:  
Terminal Programs are used to connect to BBS services (bulletin board system) and mainframe or mini-mainframe  
computers. Quarterdeck Procomm Plus, Microsoft Works (Communications Module), R-Link, and P-Term are just a few  
examples of this type of program.  
Remote Administration are used to access your home or office computer remotely for file sharing or remote control.  
Symantec PCAnywhere, McAfee Remote Desktop and Reach Out, Farallon’s Timbuktu, Claris Apple Remote Access, and  
Attachmate EXTRA! are a few examples of this type of program.  
On-line Services are used to access the Internet, or discussion and information forums within the service. On-line services  
provide their own proprietary software interface for accessing their service. America Online, CompuServe, MSN (Microsoft  
Network), and Prodigy are just a few on-line service providers that use their own proprietary software.  
Important: These examples are provided for your information only. Nokia does not endorse or provide support for any of  
the above applications or services.  
• CONFIGURE YOUR FAX SOFTWARE  
Before you can use your phone to send and receive fax calls, you must configure your fax software so that it uses your phone as  
the active modem (rather than your existing modem).  
Many of the most popular fax programs should support multiple modems connected to a PC or laptop computer, including  
Symantec WinFax Pro, Smith Micro Software HotFax (version 3.02 or newer), Castelle FaxPress, etc.  
Note: Data or fax calls using your wireless phone are possible only if your service provider supports digital data and fax  
service. You may be required to subscribe to these services. Check with your service provider before attempting to send or  
receive faxes.  
[ 32 ]  
               
Data and fax software setup  
Select the correct modem  
Each fax application typically has a setup menu that can be used to alter  
the settings for your modem, as well as define how and when calls are to  
be received (for example, immediately, on the third ring, etc.). This menu  
may also provide you with a list of available modems that you can use when  
sending and receiving fax calls.  
Use your fax program settings menu to select your phone as the active fax  
modem.  
Confirm hardware settings  
Use the modem properties dialog box of your fax software to confirm the  
following settings:  
Communications port: COMnn (where nn the virtual COM port number  
assigned to the DKU-5 data cable)  
Initialization: 19200 bps  
Modem type: Class 2.0  
Flow control: Hardware  
Note: You may need to add the following initialization string to your fax software, even though the program provides a  
drop-down list or checkbox for setting the fax mode/class: AT+FCLASS=2.0  
• LEARN ABOUT MANUAL SELECTION OF INCOMING CALLS  
You can receive digital data or fax calls with your PC using your Nokia phone the same way that you would using your existing  
modem.  
Certain service providers require that you preset your phone to receive incoming data or fax calls, rather than having the phone  
automatically detect the type of incoming call.  
Note: Your service provider may have special requirements for inbound data and fax calls. Check with your service provider  
to see if prearrangement of incoming data or fax calls is necessary.  
11  
Prearrange data and fax call settings in your data/fax software  
Before you can successfully receive a digital data call or fax transmission in this situation, your phone must receive a special  
command from your data or fax software. This command tells your phone that the next call it receives is a data call or fax  
transmission.  
Your data or fax programs should allow you to send additional commands to the modem when the program is launched or when the  
fax software instructs the modem to receive a call. Use the modem configuration menu in your fax software to send the following  
special initialization string to the modem:  
To preset your phone to receive a data call, use the following AT command: AT+CSP=1  
To preset your phone to receive a fax call, use the following AT command: AT+CSP=2  
The following is an illustration of one fax program modem settings dialog box, and is provided as an example of how to configure  
your software:  
[ 33 ]  
           
Data and fax software setup  
You should only have to make this modification once; the modem configuration is usually saved as a part of your data or fax  
program settings. Please refer to the documentation or online help files for your data program for more information.  
11  
Prearrange data and fax call settings from phone menu options  
Your phone contains a menu option that should be used to configure your phone for inbound data and fax calls. This option uses  
the phone menu to prearrange inbound data and fax calls, rather than entering customized modem initialization strings into your  
data or fax software.  
1
2
3
4
From the Start screen, press Menu 4-1-8-1 (Settings > Call settings > Data/fax calls > Incoming data/fax call).  
Scroll to highlight the desired type of inbound call (Data calls only, Fax calls only).  
Press Select to confirm your choice.  
Press  
to return to the Start screen.  
Phone display  
When the software has sent the proper command to your phone, the phone displays a message indicating it is ready for the  
incoming data or fax call.  
Once your phone is preset for either data or fax reception, you cannot receive incoming voice calls. You must either remove the  
data cable or turn the phone power off and back on to restore normal voice call reception. However, it is still possible to place calls  
with the phone and PC connected while in prearranged data/fax call mode.  
Notes about data and fax calls  
Do not terminate digital data or fax calls by pressing the  
key. This action may cause your data or fax application to  
lock up temporarily and could cause loss of data. Use your data or fax software to terminate data or fax calls.  
Data or fax calls cannot be initiated using your phone keypad. All calls must be initiated using the data or fax software.  
Any touch tones (DTMF tones) needed for calling cards, special long-distance access numbers, etc. must be programmed into  
the dialing string.  
[ 34 ]  
   
Index  
12 Index  
Numerics  
E
1X (1XRTT) 24  
1XRTT (1X) 24  
1XRTT data  
Edit graphic  
bitmap files 19  
created with PC Graphics 19  
existing graphic in phone 18  
Edit settings 23  
Dial-up Networking 28  
A
Abbreviations 2  
About MIDI files 9  
Add contact to caller group 23  
Add new contact 22  
America Online  
GRPS settings 30  
AOL  
F
Fax  
configuring software 32  
modem selection 33  
Fax calls  
Manual selection 33  
Prearranged 33  
File formats  
CSD modem setup 31  
Applications  
not supported 19  
supported 19  
compatible 1  
C
G
Caller group logos 17  
Caller groups  
GPRS  
when to use 24  
GPRS data  
AOL settings 30  
add contact 23  
Changing PIM applications 14  
channel priority  
advanced 11  
simple 10  
H
Half-tone adjustment 19  
Circuit Switched Data (CSD) 24  
Compatible applications 1  
Configure data software 28  
Configure fax software 32  
Configure PC Sync 12  
Connect to a network/Internet 29, 31  
Contacts  
custom contact lists 14  
deleting-settings 13  
Content Copier 6  
I
Ignore contact deletions 13  
Installation  
change language of installation 3  
language selection 3  
PC Suite 3  
uninstall PC Suite 3  
Internet access  
wireless service provider 24  
Introduction 1  
basics 6  
compatible phones 6  
log 7  
M
saving data 7  
source phone 7  
target phone 7  
12  
MIDI channels 9  
MIDI instruments 9  
Modem driver  
unsupported phones 8  
Copy contacts 22  
Copy data to target phone 7  
Create a new connection 28, 31  
CSD  
download 25  
Modem setup 24  
configure data software 28  
Dial-up Networking 28, 30  
Modem software 25  
Move contacts 22  
AOL settings 31  
when to use 25  
CSD (Circuit Switched Data) 24  
Custom contact list 14  
N
New contact list  
Lotus Organizer 15  
Other 15  
D
Data applicatons 32  
Data call  
Outlook 14  
configure data software 27  
Data call notes 34  
Data calls  
Manual selection 33  
Prearranged 33  
Delete contact 22  
Deleting contacts-settings 13  
Dial-up Networking 28, 30  
Digital data call requirements 1  
Download modem driver 25  
New graphic  
creating 17  
saving 18  
transfer to phone 18  
New modem connection 28, 31  
New Synchronization 14  
Notes on data calls 34  
O
Other data applications 32  
[ 35 ]  
 
Index  
P
PC 2  
PC Suite  
Content Copier 6  
featured components 3  
installation 3  
PC Sync 12  
PC Sync 12  
automatic startup 14  
basics 13  
changing PIM applications 14  
exit application 13  
New Synchronization 14  
options 14  
starting application 13  
supported PIMs 12  
synchronize for the first time 13  
task bar icon 13  
PC Sync configuration  
calendar and conacts 12  
general 12  
PIM properties 13  
resolving conflicts 12  
Phone Editor  
add/delete contacts 22  
Contacts window 21  
managing contacts 21  
Picture messages 17  
PIM 2  
polyphony 9  
R
Requirements  
digital data calls 1  
system 1  
Resolving synchronization conflicts 12  
S
Safety notes 2  
save MIDI file 11  
Saving phone data 7  
scaleable polyphony 9  
Settings  
12  
edit 23  
Source phone 7  
SP-MIDI 9  
Standard Midi File (SMF) 9  
Standard MIDI files (about) 9  
subset of phone book 14  
Synchronization conflicts 12  
System requirements 1  
T
Target phone 7  
transfer MIDI to phone 11  
Types of data applications 32  
W
Wireless modem setup 24  
[ 36 ]  

Metra Electronics MAZDA 6 2009 99 7511S User Manual
Lindy 70674 User Manual
LG Electronics LX370 User Manual
Lenoxx Electronics CD 103 User Manual
HTC Touch Pro RAPH800 User Manual
Hitachi Travelstar HTE723225A7A364 User Manual
Clarion XMD2 User Manual
Casio GQ 50 User Manual
Black Box Computer Accessories USB to RS 232 DB9 Converter User Manual
Ayre Acoustics CX 7EMP User Manual