Nokia 239 User Manual

DESCRIPTION OF KEYS  
Use the phone keys as follows:  
ON  
On the side of phone:  
ͬ and ͭ  
Select earpiece  
volume.  
Press and hold to  
switch the phone on  
or off.  
Scrolls the memory  
locations. After  
pressing MENU,  
MENU  
Selects menu mode.  
or  
scrolls the  
menus and displays  
options.  
STO  
Stores information in a  
memory location. In a  
menu, confirms a  
setting.  
ABC  
Selects alpha mode/  
number mode; press  
once to select alpha  
mode (i.e. to enter  
characters or display  
names), and press  
again to select  
Dials voicemail or  
favorite number  
stored in memory  
location 98.  
number mode.  
SEND  
Dials a number.  
Pressing MENU SEND  
in a call can send  
DTMF data.  
RCL  
Recalls information  
from a memory loca-  
tion. If the display is  
full, shows hidden  
digits.  
0 to 9, and #  
*
Enter numbers and  
CLR  
characters.  
Deletes characters  
and clears display.  
9 (for emergency  
calls), and # are also  
*
used for one-touch  
END  
Ends a call.  
dialing.  
For your information...  
To install/charge the battery: ...................................................See page 8/9  
To switch on:..............................................................................See page 10  
To make a call:...........................................................................See page 11  
To make an emergency call: .....................................................See page 13  
To view your own number:.......................................................Press RCL 99  
When using your phone in a call:  
• Hold the phone to your ear, and speak normally; there is no need to move  
the phone to your mouth.  
In this owner’s manual:  
• Keypresses are indicated in a bold typeface, e.g. MENU.  
• Display messages are indicated in an italic typeface, e.g. CALL.  
9351288 NOKIA 239 english  
PRINTED IN CANADA  
QUICK GUIDE  
Adjust Volume  
(during a call)  
Clear a digit  
Press to increase and to  
decrease the volume  
Press the CLR key  
Clear display  
Ending a Call  
Last number redial  
Making a call  
Press and hold the CLR key  
Press the END key  
Ensure the display is clear and press SEND  
Key in the area code and phone  
number and press the SEND key  
Press any key except ON or the  
volume keys  
Receiving a call  
Switching on/off  
Press and hold the ON key  
Memory Functions  
9 Key Emergency Call Press and hold the 9 key  
Displaying your own  
number  
Press RCL 99  
One-touch dialing  
Simply press any one of these keys to  
dial the associated number  
(#, , 9,  
)
*
Search for a name  
Search for a number  
Speed dialing  
Press ABC and then  
or  
Press or (with a clear display)  
Key in the location number and press the  
SEND key  
The Menu Facility  
Enter function  
Press the STO key  
Press the MENU key  
Press the CLR key  
Press the MENU key and then the  
function shortcut number (listed on the  
flip-side of this card)  
Enter menu facility  
Exit menu facility  
Menu shortcut  
Scroll  
Press  
to scroll forward and  
to  
scroll backward  
Select option  
Press the STO key  
LIST OF MENU FUNCTIONS  
Menu Name  
Shortcut Keys  
Description  
LOCK PHONE  
MENU 0 (L)  
Locks/unlocks the phone.  
SYSTEM SELECT  
MENU 1  
Selects roaming mode  
(system feature).  
RINGING TYPE  
CALL TIMERS  
MENU 2  
MENU 3  
Selects the ringing tone type.  
Displays length of calls.  
(S) Resets the timers.  
LIGHTS CONTROL  
MENU 4  
Selects operation of  
display and keypad lights.  
KEYPAD TONES  
RINGING VOLUME  
NAM SELECT  
MENU 5  
MENU 6  
MENU 7  
Switches keypad tones on/off.  
Selects volume of ringing tone.  
Displays and selects  
cellular number/network.  
AUTO ANSWER  
MENU 8  
MENU 9  
Sets automatic answer on/off.  
ACCESSORY MENU  
Controls accessories  
connected to the phone.  
CLEAR LAST CALL  
MENU 1 0  
Sets the last-called numbers to  
be cleared or retained when  
phone is switched off.  
CHANGE LOCK CODE  
DATA MODE  
MENU 1 1 (S)  
MENU 1 2  
Allows you to change lock code.  
Selects data mode (in a call).  
EMERGENCY 9 KEY  
MENU 1 3 (L)  
Sets 9 key on/off for one-touch  
dialing of emergency calls.  
CALL BARRING  
MEMORY LOCK  
MENU 1 4 (S)  
Sets call restrictions.  
MENU 1 5 (S)  
Sets memory access  
restrictions.  
ACTIVATE KEYGUARD MENU ABC  
Locks/unlocks the keypad.  
or MENU 1 6  
SEND DTMF  
SID SCREEN  
MENU SEND  
or MENU 1 7  
Sends DTMF tones (in a call).  
Selects SID to on/off.  
MENU 1 8 (L)  
(L) = requires entry of 4-digit lock code (default is 1234).  
(S) = requires entry of 5-digit security code (default is 12345).  
CONTENTS  
Important Safety Information......................3  
Emergency Calls............................................................4  
Display Indicators...............................................7  
Getting Started.....................................................8  
Installing the battery ...................................................8  
Charging the battery ..................................................8  
Switching on .............................................................10  
Switching off .............................................................10  
Basic Functions.................................................11  
Receiving a call ........................................................11  
Making a call.............................................................11  
Activating PIN Calls ..................................................12  
Making emergency calls ..........................................13  
Quick ways of dialing................................................14  
Making international calls .....................................14  
One-touch dialing ..................................................14  
Using voicemail/favorite number...........................16  
Speed dialing............................................................17  
Last number redial.................................................17  
Using the Memory.............................................18  
General information .................................................18  
Memory locations...................................................18  
Memory linking.......................................................20  
Storing information....................................................20  
Entering a name........................................................22  
Correcting mistakes .................................................22  
Displaying ‘hidden’ numbers....................................23  
Clearing the contents of a memory location.............23  
Moving the contents of a memory location ..............23  
Recalling information by memory  
location number.....................................................24  
Recalling information by name.................................25  
Scrolling for a number ..............................................25  
Searching for a name ...............................................25  
Using the scratchpad memory.................................26  
Reminder message facility .......................................27  
Displaying your own number....................................27  
Changing the wake-up message .............................27  
1
Menu Functions..................................................29  
Using the menu.........................................................29  
List of menu functions...............................................31  
Description of menu functions..................................32  
Lock Phone (Menu 0).............................................32  
System Select (Menu 1).........................................33  
Ringing Type (Menu 2)..........................................34  
Call Timers (Menu 3)..............................................35  
Lights Control (Menu 4).........................................36  
Keypad Tones (Menu 5)........................................36  
Ringing Volume (Menu 6)......................................37  
NAM Select (Menu 7).............................................37  
Auto Answer (Menu 8)...........................................38  
Accessory Menu (Menu 9) ....................................38  
Clear Last Call (Menu 10)......................................39  
Change Lock Code (Menu 11)..............................39  
Data Mode (Menu 12)............................................40  
Emergency 9 Key (Menu 13).................................40  
Call Barring (Menu 14)...........................................41  
Memory Lock (Menu 15)........................................42  
Activate Keyguard (Menu 16)................................43  
Send DTMF (Menu 17) ..........................................44  
SID Screen (Menu 18) ...........................................46  
Hook Flash Function and 3 Party Calls..................47  
Battery Information.........................................48  
Reference Information...................................51  
List of display messages..........................................51  
List of tones...............................................................54  
Care and Maintenance.............................................55  
Troubleshooting ........................................................55  
Accessories ..............................................................56  
Index.........................................................................60  
Technical information................................................63  
2
IMPORTANT SAFETY  
INFORMATION  
TRAFFIC SAFETY  
Do not use a hand-held telephone while driving a  
vehicle. If using a hand-held telephone, park the  
vehicle before conversing.  
Always secure the phone in its holder; do not place  
the phone on the passenger seat or where it can  
break loose in a collision or sudden stop.  
The use of an alert device to operate a vehicle’s lights  
or horn on public roads is not permitted.  
Remember, road safety always comes first!  
OPERATING ENVIRONMENT  
Remember to follow any special regulations in force in  
any area and always switch off your phone whenever it  
is forbidden to use it, or when it may cause interference  
or danger.  
Operation of any radio transmitting equipment,  
including cellular telephones, may interfere with the  
functionality of inadequately-protected medical  
devices. Consult a physician or the manufacturer of  
the medical device if you have any questions.  
Other electronic equipment may also be subject to  
interference.  
As with other mobile radio transmitting equipment,  
users are advised that for the satisfactory operation of  
the equipment and for the safety of personnel, it is  
recommended that the equipment should only be  
used in the normal operating position.  
Users are advised to switch off the phone when at a  
refueling point (service station). Users are reminded of  
the need to observe restrictions on the use of radio  
equipment in fuel depots (fuel storage and distribution  
areas), chemical plants, or where blasting operations  
are in progress.  
Do not store or carry flammable liquids, gases, or  
explosive materials in the same compartment as the  
phone, its parts, or accessories.  
3
Only qualified personnel should install or service the  
phone in a vehicle. Faulty installation or service may  
be dangerous and may invalidate any warranty which  
may apply to the unit.  
Electronic fuel-injection systems, electronic anti-skid  
braking systems, electronic cruise-control systems  
and other electronic systems can malfunction due to  
the lack of protection from radio signals. Check regu-  
larly that all cellular phone equipment in your vehicle is  
mounted securely and operating properly.  
Switch off your cellular telephone when in an aircraft.  
The use of cellular telephones in an aircraft may be  
dangerous to the operation of the aircraft, disrupt the  
cellular network, and is illegal.  
Failure to observe these instructions may lead to sus-  
pension or denial of cellular services to the offender,  
or legal action or both.  
EMERGENCY CALLS  
IMPORTANT!  
This phone, like any cellular phone, operates using  
radio signals, cellular and landline networks as well as  
user-programmed functions which cannot guarantee  
connection in all conditions. Therefore you should  
never rely solely upon any cellular telephone or similar  
radio device for essential communications  
(e.g. medical emergencies).  
Remember, to make or receive any calls the phone  
must be switched on and in a service area with  
adequate cellular signal strength.  
Locking the phone or restricting calls does not prevent  
making emergency calls with the phone. To make an  
emergency call, if the phone is not on, switch it on.  
If the ALPHA indicator is shown on the display, clear it  
by pressing the ABC key. Press and hold the CLR key  
for several seconds to ready the phone for calls.  
Key in the emergency number for your present  
location (e.g. 911, 112 or other official emergency  
number). Emergency numbers vary by location.  
Press the SEND key.  
4
If Keyguard is in use, you may have to deactivate it  
(press MENU ABC) before you can make an  
emergency call. Consult this document and your local  
cellular service provider.  
Emergency calls may not be possible on all cellular  
phone networks or when certain network services  
and/or phone features are in use. Check with local  
cellular service providers.  
When making an emergency call, remember to give all  
the necessary information as accurately as possible.  
Remember that your cellular phone may be the only  
means of communication at the scene of an accident –  
do not cut off the call until given permission to do so.  
USING THIS GUIDE  
The cellular phone described in this guide is approved  
for use on the AMPS network. The AMPS manual  
activation commands for various services are not  
presented in this guide (e.g. using and # for  
*
activating or deactivating services). The phone  
nevertheless is capable of handling commands given  
in that form. For these commands, please consult with  
your service providers.  
A number of features included in this guide are called  
Network Services. They are special services provided  
by cellular service providers. Before you can take  
advantage of any of these Network Services, you must  
subscribe to the service(s) you want from your home  
service provider. You can then activate these features  
as described in this guide.  
The operation of the phone requires successive key  
depressions; two keys are never to be pressed  
simultaneously.  
WARRANTY NOTE  
Use only batteries, antennas and chargers approved  
by the phone manufacturer. The use of any other  
types will invalidate any approval or warranty applying  
to the telephone, and may be dangerous.  
5
FCC/INDUSTRY CANADA NOTICE  
Your phone may cause TV or radio interference  
(e.g. when using telephone in close proximity of  
receiving equipment). The FCC/Industry Canada  
can require you to stop using your telephone if such  
interference cannot be eliminated. If you require  
assistance, contact your local service facility.  
THIS DEVICE COMPLIES WITH PART 15 OF  
THE FCC RULES. OPERATION IS SUBJECT TO  
THE CONDITION THAT THIS DEVICE DOES  
NOT CAUSE HARMFUL INTERFERENCE.  
6
DISPLAY INDICATORS  
µ
¾
º
³
ALPHA  
AB  
MENU  
S
B
ROAM  
NO SVC  
IN USE  
ON  
»
¿
´
²
³ AB Indicator  
Shows which network is in use:  
A
B
– System A only  
– System B only  
A B – Both systems  
Blank – Home area only  
· Signal Indicator Shows approximate received  
signal strength.  
» ON Indicator  
Shows that phone is switched  
on.  
¿ ROAM Indicator Shows which system the  
phone is using:  
On – home system in a non-  
home area.  
Flashing – non-home system.  
Off – home system in the home  
area.  
´ IN USE Indicator Shows that a call is in progress.  
² NO SVC Indicator Shows that cellular service is  
not available. If the SID List is  
Active, the “NO” will flash.  
Battery Indicator Shows approximate capacity  
remaining.  
Scrolls when charging is in  
progress.  
Flashes to show that battery is  
too hot or cold and will not be  
charged.  
7
If charging while phone is  
switched off, the indicator bars  
disappear, but  
B
remains on.  
º Number  
Shows menu or memory  
location selected.  
¾ MENU Indicator Shows that menu mode has  
been selected.  
µ ALPHA Indicator Shows that alpha mode has  
been selected; letters can be  
entered, and names can be  
displayed.  
GETTING STARTED  
INSTALLING THE BATTERY  
Place the base of the  
battery into the lower part  
of the phone, taking care  
to line up the screw in the  
lower right corner with the  
indent in the battery  
plastic.  
· Push the top of the battery toward the upper part  
of the phone, until the catch clicks.  
To remove battery, when required:  
Press and hold catch.  
· Pull top of battery away  
from phone.  
» Detach battery from the  
phone.  
CHARGING THE BATTERY  
TO ACHIEVE FULL BATTERY CAPACITY,  
NEW BATTERIES MUST BE CHARGED  
STOP  
WITH THE PHONE OFF  
FOR AT LEAST 24 HOURS  
BEFORE INITIAL USE.  
8
Take the charger supplied,  
and fit the connector into  
the phone.  
· Connect the charger to a  
standard AC outlet  
(or cigarette lighter  
receptacle).  
» The phone will beep to indicate the charger has  
been connected properly.  
¿ For fastest charging, make sure the phone is off.  
´ Leave the battery on charge for 24 hours before  
initial use. After the first use, the charging times  
depend on the type of battery fitted, and charger  
used; approximate times are shown below:  
Battery Type  
Charger Type  
*BTH-8S BTH-8SM BTH-8H BTH-8HM  
Standard Travel  
Charger  
90 mins  
110 mins 5 hrs  
5.5 hrs  
(ACH-3U)  
Rapid Travel  
Charger  
40 mins  
60 mins  
70 mins 100 mins  
(ACH-4U)  
or Rapid Cigarette Lighter Charger (LCH-2)  
*Subject to availability.  
² When charging is complete, disconnect the  
charger from the outlet and from the phone.  
For further details, please refer to ‘Charging  
Indications’ (below), and ‘Battery Information’  
(page 48).  
Charging indications:  
– When the phone is switched off, and the charger is  
connected, only the Bpart of the battery indicator  
will be visible.  
– When the phone is switched on, and charging is in  
progress, the bars on the battery charge indicator  
will ‘scroll’. When the battery is fully charged, the  
scrolling will stop and all bars will be on (steady).  
9
SWITCHING ON  
³ If your phone has an extendable antenna, extend  
the antenna fully.  
· Press and hold the ON key.  
The phone will carry out a short self-  
test, briefly displaying the ‘wake-up’  
message. (This message is pro-  
grammed by your dealer, but you  
may change it if you wish; refer to  
‘Changing the wake-up message’,  
page 27, for further details).  
When the ON indicator appears, the phone is ready for  
use.  
If the NO SVC indicator remains on, then you may be  
outside the cellular service area, and will not be able  
to make or receive calls.  
Remember, to make or receive any calls, your  
phone must be switched on and in service.  
If you are using the SID function (refer to ‘SID Screen  
(Menu 18)’, page 46, for details):  
When SID is switched on, and specific carriers are not  
available in your area, then the NO part of the NO SVC  
indicator may flash; in this instance you may be able to  
make emergency calls, but will not be able to make or  
receive any calls.  
As with any other radio-transmitting devices, avoid  
prolonged contact with the antenna when the phone  
is switched on.  
SWITCHING OFF  
³ Press and hold the ON key.  
The display will become blank.  
If the charger is connected, the  
on, and charging will continue.  
B
indicator will remain  
NOTE: Switch off the phone before removing the  
battery.  
10  
BASIC FUNCTIONS  
RECEIVING A CALL  
³ Press any key except ON or the volume keys.  
An incoming call is indicated by a ringing tone, and  
the CALL message flashing on the display.  
If the SILENT SERVICE option (Menu 6) has been  
selected there will be no ringing tone; the keypad and  
display lights will flash instead, and only a short beep  
will be heard (refer to ‘Ringing volume (Menu 6)’,  
page 37).  
If you do not answer a call, the CALL message will  
remain on the display (indicating a missed call); to  
clear the display, press any key.  
‘Any-key answering’ facility: Any key (except ON or  
the volume keys) may be pressed to answer a call  
(except when ‘keyguard’ is active). If ‘keyguard’ is  
active, you must press the SEND key to answer the  
call. If you receive a call while entering a number, the  
call will be answered on the first keypress after the  
ringing starts.  
· To end the call, press END.  
MAKING A CALL  
³ For best reception, pull the  
antenna up to extend fully. Do not  
leave the antenna partly extended.  
· Open the keypad cover. Enter the  
number you wish to dial. Remember  
to include the area code (if this is  
necessary on your system) even if you  
are making a local call. The number will  
be displayed.  
» To correct a mistake, press CLR to delete the last  
digit, or press and hold CLR to clear the whole  
display (then re-enter the number).  
¿ Press SEND. The IN USE indicator will appear on  
the display, and the number will disappear when  
the call is connected.  
´ To end the call, press END.  
11  
Notes:  
If NO SVC is displayed:  
You are outside the cellular service area.  
If NOT ALLOWED is displayed:  
The call is not allowed or your phone is locked.  
(Refer to ‘Call Barring (Menu 14)’, page 41 and ‘Lock  
phone (Menu 0)’, page 32).  
If the signal is poor:  
The quality of your call depends on the signal strength  
of the cellular signal in your  
area. The signal strength  
indicator on the display (‘S‘ in  
diagram right) shows received  
S
B
ON  
IN USE  
signal strength. The more bars  
showing, the stronger the  
signal.  
If the signal is poor, try moving to a different position.  
If you are using the phone in a building, you may find  
that reception is better near a window.  
To adjust the earpiece volume:  
On the side of the phone, press to increase the vol-  
ume (maximum level is 5) or to decrease the volume  
(minimum level is 1). The volume level you select is  
displayed. If you try to adjust the volume below level 1,  
or above level 5, the phone gives a warning beep.  
If you are using the handsfree option, the handsfree  
volume is adjusted. The volume levels for the phone,  
and handsfree option, are stored independently.  
ACTIVATING PIN CALLS  
This function allows you to activate or deactivate the  
PIN call. When this function is set to on, the PIN code  
is requested at the call setup.  
To activate the PIN call:  
³ Enter the control code , #, 7, 4, 6, 2, 2, 5, 5, #  
*
(spells # PIN CALL #).  
*
The phone prompts for your four-digit PIN CODE?  
· Enter your PIN code and press STO.  
12  
The message PIN CALL ON is briefly displayed con-  
firming the PIN call activation.  
To deactivate the PIN call:  
³ Enter the control code , #, 7, 4, 6, 2, 2, 5, 5, #  
*
(spells # PIN CALL #).  
*
The phone prompts for your four-digit PIN CODE?  
· Press STO without entering the PIN code.  
The message PIN CALL OFF is briefly displayed con-  
firming the PIN call deactivation.  
To make a call when the PIN call is set to on:  
³ Make the call in the usual way.  
The message PIN CALL is displayed. The phone  
prompts you to wait for a tone (WAIT FOR A  
PROMPT).  
· After the tone, press the SEND key.  
The message SENDING PIN is displayed. If the  
message remains on the display, press the SEND  
key to resend the PIN code. Wait for your call to  
be connected.  
Note: When the phone is set to PIN CALL ON, an  
emergency call to the emergency number pro-  
grammed into your phone (e.g., 911 or another official  
emergency number) will be dialed as a normal call  
without the PIN code request.  
MAKING EMERGENCY CALLS  
EITHER:  
³ If the phone is not on, switch it on.  
· Press and hold the CLR key for several seconds  
to ready the phone for calls.  
» Key in the emergency number for your present  
location (e.g. 911, 112 or other official emergency  
number). Emergency numbers vary by location.  
¿ Press SEND.  
OR:  
Press 9 for two seconds or more.  
13  
Note: Official emergency numbers vary by location  
(e.g. 911, 112 or other official emergency number).  
However, only one emergency number is programmed  
into your phone to be dialed automatically by one key  
emergency dialing, which may not be the proper  
number in all circumstances. One key emergency  
dialing does not operate when the keyguard feature is  
in use and when the Emergency 9 key function is set  
to OFF. Emergency 9 key is set to OFF when the  
phone leaves the factory.  
QUICK WAYS OF DIALING  
Making international calls  
To make an international call, either dial the number  
in the normal way (i.e. starting with the international  
prefix), or use the built-in quick method, utilizing the  
internationally-recognized ‘+’ character; ‘+’ is available  
on the key.  
*
To use the quick method:  
Press ** (‘+’ will be displayed), instead of entering  
the international prefix, then dial the remainder of the  
number. For example, calling a UK number can be  
done by entering a number starting ‘**4 4’.  
When sent, the international prefix (for the NAM  
currrently selected) will be generated automatically.  
Note, however, that if you store a number using the  
international prefix ‘+’, then when recalled it will be  
displayed with the appropriate dialing code.  
Note: To allow international calls, ‘Call Barring  
(Menu 14)’, page 41 must be set to ‘ALLOW ALL’.  
One-touch dialing  
The phone is equipped with 4 one-touch dialing keys.  
Simply press any one of these keys to dial the  
associated number (you do not need to press SEND).  
The following keys offer one-touch dialing:  
Dials the number stored in memory location 96;  
press and hold the key for 2 seconds. You may  
store any number in this location.  
*
14  
#
9
Dials the number stored in memory location 97;  
press and hold the key for 2 seconds. You may  
store any number in this location.  
Dials the emergency number (programmed by  
your dealer); press and hold the key for 2  
seconds. This function will not operate if key-  
guard is active, or if the ‘Emergency 9 key’  
function (Menu 13) is set to OFF.  
The emergency number is programmed by your  
dealer, and stored in a special location. You  
cannot change this number, neither can you  
recall the number to the display without dialing  
the number. Refer to ‘Making Emergency Calls’,  
on page 13.  
Dials the number stored in memory location 98.  
This location may already contain your voicemail  
number string, but you may store any number in  
this location (e.g. if you are not a subscriber to  
voicemail). Refer to ‘Using voicemail/favorite  
number’, page 16, for further details.  
NOTE: When keyguard is activated, none of these  
keys are operational for one-touch dialing.  
When in a call, the , # and 9 keys do not operate as  
*
one-touch dialing keys; instead, they revert to their  
normal (DTMF tone-dialing) functions.  
When in a call, the  
key does not operate to make  
a further call. Instead, pressing this key would force  
DTMF data to be sent if there is data waiting to be  
sent. For example, the string stored in voicemail mem-  
ory location 98 might contain the voicemail phone  
number, then a ‘w’ and some DTMF data; once a call  
to the voicemail number had been established, a sec-  
ond press of the  
key will send the DTMF data.  
You may link any memory location to a one-touch  
dialing key; this will enable you to dial the phone  
number stored in that location, by simply pressing the  
key. To do this, store the number of the memory  
location (i.e. one or two digits only) to be linked, in  
any of the one-touch dialing memory locations.  
For example, to link the number stored in memory  
location 33 to the  
key, store ‘33’ in memory  
location 98 (voicemail/favorite number); then, when  
15  
you press  
, the phone number in memory  
location 33 will be dialed automatically (speed dialed).  
This function has the following benefit:  
You may change the ‘favorite’ number which is dialed  
when the  
key is pressed; e.g. you may keep  
several such numbers in normal memory locations,  
and select the required number by simply storing its  
location number in location 98, as required. This is  
preferable to copying contents that exist in other  
locations to location 98, as this cannot be done when  
the contents has a name (any particular name can be  
stored in only one location).  
Using voicemail/favorite number  
The  
(voicemail) key is designed to allow access to  
your voicemail (or favorite number) simply by pressing  
the key once (there is no need to press SEND). Once  
a call is established, a second press of this key will send  
a PIN number (or DTMF string) if this has been stored.  
The voicemail/favorite number facility uses the number  
stored in memory location 98. You may store any  
number in this location, if you do not wish to use the  
voicemail facility. Whatever number is in location 98  
will be dialed automatically when  
is pressed.  
A typical voicemail number string would be:  
‘222w3333’, where ‘222’ is the voicemail number  
allocated to you by your cellular service supplier,  
‘w’ is the wait character (this is entered by pressing  
), ‘3333’ is your voicemail PIN code (which  
* * * *  
would be sent after the second press of the  
key).  
Please note that the voicemail service is a system  
feature, and may not be available on your network.  
To be able to use voicemail, it must be available on  
your network, and you must be a subscriber to this  
service. For further details, ask your network provider.  
For specific operating instructions refer to the  
appropriate documentation which may be issued by  
your network provider.  
16  
SPEED DIALING  
Speed dialing is the quickest way to recall and dial a  
number, and is particularly useful for frequently-used  
numbers. You can speed dial any number already  
stored in a memory location either by entering the  
memory location number or the name stored with the  
number to be called.  
³ Enter the number of the memory location containing  
the number to be dialed (e.g. 2).  
Alternatively, press ABC (to select alpha mode), then  
enter the name stored with the number to be dialed.  
· Press SEND.  
The phone will recall the number/name from memory,  
display it briefly, then dial the number. If the memory  
location contains no number, or the name was not  
found, then no call attempt will be made. If the  
memory location is empty, the message EMPTY  
(if in number mode) or NOT FOUND (if in alpha mode)  
will be displayed.  
Last number redial  
The last five phone numbers you called or attempted  
to call are stored in the phone’s memory location 0  
(L0-L4). This stack of the five last dialed numbers  
remains in the phone’s memory when the phone is  
switched off.  
To redial a last dialed number:  
If there are any characters on the display, clear  
the display by pressing and holding the CLR key.  
· Press the SEND key to display the last dialed  
number. Use the  
key to scroll through the  
last dialed numbers. To view the associated  
names, if the dialed calls were made from the  
phone directory, press the ABC key and then start  
scrolling by using the  
key. The location num-  
ber is displayed in the upper right corner of the  
display (L0-L4).  
• If the stack of the last dialed numbers is empty,  
the message LOCATION EMPTY will be  
displayed.  
» To make a call to the displayed number or name,  
press the SEND key.  
17  
USING THE MEMORY  
GENERAL INFORMATION  
Memory locations provided:  
– 98 ‘standard’ locations. Each of these may be used  
to store a number and a name.  
– Five locations (numbered 00 to 04) which, together  
contain the last 5 numbers you dialed. These loca-  
tions are reserved exclusively for redial numbers,  
stored automatically by the phone. Location 00  
contains the most recent number dialed; location 04  
contains the oldest. (See ‘Last Number Redial’,  
page 17 for details.)  
– One scratchpad memory (location # #); this may be  
used to store a number during a call.  
– One location (99) which holds your own number and  
the wake-up message.  
Location No. Details  
1-89  
89 standard memory locations. You can  
use each one to store a name and  
number of your choice.  
90-95  
6 standard memory locations. You can  
use each one to store a name and num-  
ber which you can call even when the  
ALLOW M90-M95 call barring option  
is selected. The call barring option  
restricts the outgoing calls you can  
make. See page 41 for details.  
96  
97  
98  
Holds the number that is dialed when  
you press the one-touch dialing key  
*
for 2 seconds.  
Holds the number that is dialed when  
you press the # one-touch dialing key  
for 2 seconds.  
Holds your voicemail number or  
‘favorite’ number which is dialed when  
you press the  
one-touch key.  
18  
99  
Holds your own number and the  
‘wake-up message’ – the name or text  
displayed when you switch the phone  
ON. You cannot change your number,  
but can change the wake-up message.  
See ‘Changing the wake-up message’  
on page 27.  
Memory locations 90-99 are allocated for specific  
purposes. If you wish, however, you may store any  
information in these locations, in the normal way  
(except for location 99 where you can store an alpha  
wake-up message, but cannot store a different  
‘own number’).  
Length of numbers and names you may store:  
The longest number you can store in a memory  
location is 30 digits. The longest name you can store is  
16 characters.  
If you want to store a number and a name, then a  
maximum of 28 digits and characters can be held in  
each memory location. For example, if you want to  
store a 24 digit number, then the maximum length of  
the accompanying name is 4 characters.  
If the name you enter is too long for the space avail-  
able, one of the following warnings is displayed when  
you try to store the name.  
NAME TOO LONG. This indicates that the whole  
name will not fit. Press STO again if you wish to  
store the truncated name.  
NO ROOM FOR NAME. This indicates that there is  
no room for any name (no name will be stored).  
A name may include any alpha characters, spaces or  
hyphens.  
19  
Memory linking:  
The memory linking function allows two or more mem-  
ory locations to be linked. This permits long strings of  
characters, such as a phone number with an accom-  
panying DTMF string, to be sent without having to  
access manually more than one location.  
To link two locations: Enter the phone number, then a  
) and the number of the  
‘+’ character (press **  
second memory location. Store this in the first location.  
Enter the DTMF string, and store this in the second  
location.  
To send the DTMF string: Recall and dial the phone  
number in the first location. When the call is  
established, press MENU SEND to send the DTMF  
string in the second location. For full details, refer to  
‘Send DTMF (Menu 17)’, page 44 and ‘To join two  
memory locations’, page 46.  
STORING INFORMATION  
With number mode selected, enter the phone  
number. Remember to include the area code,  
and any international code, if necessary. To use  
.
‘+’ as the international prefix; press **  
· If you wish to enter a name, press ABC to select  
alpha mode, then enter the name (for further  
details, refer to ‘Entering a Name’, page 22).  
All stored names must be different. You cannot  
store a name that is already stored in any of the  
memory locations 1-89 or 90-98.  
NOTE: When you wish to store a number and a  
name, always do this as one operation.  
» Press STO. The message STORE prompts you to  
specify a memory location number.  
¿ If you want to store the information in the next free  
location, as indicated by the number in the upper  
right hand corner of the display, just press STO.  
Otherwise, enter a memory location number of  
your choice (1 to 89 or 90-98). If entering a one-  
digit number (i.e. for locations 1-9), you may press  
STO again to complete the operation or wait a  
moment for the message STORED to appear.  
20  
If storing was successful, the message STORED will  
be displayed, confirming that the information has been  
stored in the location number shown on the display.  
However:  
– If the location is already occupied when storing a  
new entry, REPLACE CONTENT? is displayed.  
– If the location is empty but the name being stored  
exists in another location, then MOVE NAME?  
will be displayed. Confirmation of this causes the  
location containing the name previously stored to be  
erased when the new name is stored.  
In any of these instances, either:  
– Press STO (within 8 seconds) if you want to replace  
the existing information, or  
– Press CLR or wait until the message STORE NOT  
DONE appears if you do not want to delete the  
existing information.  
The information you tried to store will then re-appear  
on the display, and you can then store it in another  
location.  
There are some situations where the store cannot be  
done. In such an instance, a message is displayed:  
– If there is no room to store a new entry, MEMORY  
FULL is displayed.  
– If the location chosen is full, and the name being  
stored already exists in another location then  
LOCATION FULL is displayed. Either wait for the  
information you tried to store to re-appear, or press  
CLR, then store the information in another location.  
– If the name entered is too long to be stored, then  
NAME TOO LONG is displayed and the name is trun-  
cated. Press STO again to store the truncated name.  
– If there is no room at all for the name, then  
NO ROOM FOR NAME is displayed and the name  
is deleted. Press STO again to store only the number.  
Alternative quick method for storing to the ‘one-touch  
dialing’ locations 96, 97 ( and # keys respectively)  
*
and location 98 (voicemail/favorite number  
):  
³ Enter the number/name.  
21  
· Press STO then press the specific one-touch  
dialing key (e.g. or #) for 2 seconds.  
*
To store a voicemail/favorite number in location 98:  
³ Enter the number. (Refer to ‘Using voicemail/  
favorite number’, page 16).  
· Press STO then  
.
ENTERING A NAME  
³ If in number mode, press ABC. The NAME?  
prompt and ALPHA indicator will appear, indicating  
that the phone is in alpha mode; i.e. when you  
press a key, letters will appear instead of numbers.  
· Press the key labeled with the letter you want.  
Press it once to obtain the first letter, twice (before  
the cursor appears) to obtain the second, and  
three times (before the cursor appears) to obtain  
the third. If you miss a letter, just keep pressing  
the key. To enter a space, press 0. To enter a  
hyphen press 1 three times.  
» Select further letters in the same way.  
¿ If you want two (or more) letters on the same key  
(e.g. AA or AB), either:  
– press the key to select the first character, wait  
until the cursor appears, then press the key to  
select the next character, or  
– press the key to select the first character,  
press , then press the key to select the next  
*
character (this permits faster entry).  
´ When you have finished entering the name, you  
may leave alpha mode (and select number mode)  
by pressing ABC again (e.g. to view, enter or edit  
the associated number).  
CORRECTING MISTAKES  
³ Press CLR to delete the last digit or character.  
· Press and hold CLR to clear the whole display.  
Note that this clears both the number and  
associated name.  
22  
DISPLAYING ‘HIDDEN’ NUMBERS  
The phone will display up to 16 digits at a time. If you  
enter a number longer than this, the first digits will  
disappear off the side of the display. If you type more  
than 32 digits, the first digits will be lost.  
³ To view the ‘hidden’ digits press and hold RCL.  
· To view the original display again, release RCL.  
Having displayed a long number, remember to clear  
the display (press and hold CLR) before attempting  
to recall information from a memory location (as the  
RCL key is dual function, and will not recall memory  
locations while a number longer than 16 digits is  
being displayed).  
CLEARING THE CONTENTS OF A  
MEMORY LOCATION  
NOTE: Once deleted, the contents of a memory  
location cannot be recalled.  
³ Press and hold CLR to clear the display.  
· Press STO. The message STORE prompts you to  
specify a memory location number.  
» Enter the number of the memory location you want  
to delete. The message REPLACE CONTENT?  
will appear.  
¿ Press STO (within 8 seconds). The message  
STORED and the memory location number will  
be displayed briefly, confirming that the memory  
location has been cleared. If you do not press  
STO within 8 seconds, or if you press CLR, the  
message STORE NOT DONE will be displayed,  
and the contents of the location will not be cleared.  
MOVING THE CONTENTS OF A MEMORY  
LOCATION  
You may move the name and number stored in one  
location to any empty location. If you attempt to move  
the contents of a location which contains only a num-  
ber (i.e. the name part is empty), the number will be  
copied, rather than moved.  
23  
NOTE: Duplicate names are not allowed (i.e. you may  
store any particular name in only one memory location).  
If you attempt to store a name which is already stored  
in another memory location (e.g. move it) the message  
MOVE NAME? will remind you that the name already  
exists. If you accept this, and store the contents in the  
new location, the original name and number will be  
erased.  
To move a name and number (e.g. from location 14  
to 25):  
³ Press RCL 14 (or, alternatively, you may press  
ABC to select alpha mode, enter the name stored  
in location 14, and press RCL).  
· Press STO 25. If location 25 is empty, MOVE  
NAME? will be displayed (if it is occupied,  
LOCATION FULL will be displayed; in this  
instance choose another location, e.g. press  
STO 26 to store in location 26).  
» Press STO to move both name and number.  
The message STORED will be displayed.  
If you are ‘moving’ only a number (i.e. the name part is  
empty) to an occupied location, the message  
REPLACE CONTENT? will be displayed; press STO  
to overwrite the contents, and copy the number.  
RECALLING INFORMATION BY MEMORY  
LOCATION NUMBER  
³ Enter a memory location number then press RCL  
(e.g. for location 1 press 1 RCL, or for location 12  
press 12 RCL).  
The phone number stored in that memory location will  
be displayed. If the memory location is empty, the  
message EMPTY will appear.  
· To check the name stored in the same memory  
location, press ABC. If no name was stored with  
the number, the message NAME? will be dis-  
played. To return to the number, press ABC again.  
» To call the number in the memory location, with  
either the number or the name displayed, press  
SEND.  
24  
Alternative quick method for recalling contents from  
the one-touch dialing locations 96 and 97 ( and #  
*
keys respectively) and location 98 (voicemail/favorite  
number  
):  
– Press RCL then press the or # keys for 2 seconds.  
*
– Press RCL then press the  
key. The number will  
then appear on the display.  
RECALLING INFORMATION BY NAME  
³ Press ABC (to select alpha mode).  
· Enter the name, or the first few letters of the name,  
you want to recall.  
» Press RCL. The name, and the number of the  
memory location in which it is stored, will appear  
on the display.  
¿ To check the phone number stored in the same  
memory location, press ABC again.  
´ To call the number in the memory location, with  
either the name or the number displayed, press  
SEND.  
SCROLLING FOR A NUMBER  
³ To scroll the stored phone numbers, press  
or . If you have just recalled a memory  
location by number, scrolling will start from that  
location. You will scroll all used memory locations  
in numerical order.  
· When you find the number/name you want, press  
SEND to make the call.  
SEARCHING FOR A NAME  
³ Press ABC (to select alpha mode).  
· Press to display the name which is first in  
alphabetical order (of first letter), or press to  
display the name which is last. To display the  
other stored names, press or until you find  
the name you are looking for. The number of the  
memory location in which each displayed name is  
stored will appear in the top right-hand corner of  
the display.  
25  
» To search faster, just enter the first letter of the  
name you are looking for, and then press RCL.  
The first name beginning with this letter will appear  
on the display. To scroll forward, press  
(within 15 seconds) to display the next name,  
and so on. (If no matching name is stored, the  
message NOT FOUND will be displayed.)  
¿ To check the phone number stored with the name,  
press ABC. To continue scrolling the names,  
press ABC again and use or  
.
´ When you find the name you want, with either the  
name or the number displayed, press SEND to  
call the number.  
USING THE SCRATCHPAD MEMORY  
In addition to the 98 ‘standard’ memory locations, the  
phone has one short-term memory location  
(the ‘scratchpad’) in which a number and/or name  
entered can be stored temporarily.  
The scratchpad memory is intended primarily to  
enable you to store a number during a call, but may  
be used at any time.  
To store a number/name (e.g. during a call):  
³ Enter the number (remember to include the area  
code). To enter a name, press ABC to select  
alpha mode, and enter the characters.  
· Press STO # #. The number/name will be stored  
in the scratchpad memory; any number stored  
previously will be overwritten (deleted).  
To recall the number (i.e. after the call is ended):  
³ Press RCL # #. The number will be displayed.  
To see any attached name, press ABC.  
· To call the number, press SEND.  
To move a number/name from the scratchpad to a  
permanent memory location, recall the number/name,  
then store it as described in ‘Storing Information’,  
page 20.  
26  
REMINDER MESSAGE FACILITY  
You may enter a message (a name and/or a number),  
just before switching off the phone, and then have that  
message recalled automatically when you next power  
the phone on (e.g. to remind you to make a call).  
When recalled, the reminder message is shown in  
alpha mode if there is a text part, otherwise in number  
mode. You may clear, edit or store the message, or  
call the number, by switching to number mode (press  
ABC if in name mode) and pressing SEND.  
To enter and store a reminder message:  
³ Enter the number or name on the display as  
necessary (press ABC to switch between number  
mode and name mode). Alternatively, you could  
recall a number or name already stored.  
· Press MENU momentarily, then press and hold  
ON. The phone switches off, and stores the  
reminder message automatically.  
When you next switch on the phone, the message will  
be displayed (once); the message will then be erased  
automatically from memory, and will not appear when  
you switch on again.  
DISPLAYING YOUR OWN NUMBER  
Your own number, which is stored permanently in  
memory location 99, is derived from NAM data which  
has been programmed by your dealer (you cannot  
change the number).  
To recall your own number:  
³ Press RCL 99.  
If your phone is registered on two networks, the  
number displayed will be that for the network currently  
used (and relates to the currently-selected NAM); refer  
to ‘NAM Select (Menu 7)’, page 37.  
CHANGING THE WAKE-UP MESSAGE  
The wake-up message is the message which is  
displayed briefly when the phone is switched on  
(the message relates to the currently-selected NAM).  
The wake-up message is normally a name (i.e. text),  
27  
and it is stored in the alphanumeric part of memory  
location 99. If the alphanumeric part of location 99 is  
empty, then your own number, which is stored in the  
numeric part of location 99, will be displayed instead.  
If your phone is registered on two networks, the  
wake-up message (and your own number) displayed  
will be that for the network currently used; refer to  
‘NAM Select (Menu 7)’, page 37.  
You may view the wake-up message, at any time, by  
recalling the alphanumeric part of memory location 99.  
If you wish, you may change the wake-up message  
by storing a different name into this location.  
(Please note that you cannot change or delete your  
own number, which is stored in the numeric part of  
memory location 99.)  
To change the wake-up (text) message:  
³ Either, press ABC to select alpha mode and enter  
the text message, or press RCL 99 to recall the  
current contents, press ABC to select alpha mode  
and enter the text message (if necessary, first  
delete any name already stored).  
· Press STO 99. The message REPLACE  
CONTENT? will be displayed (even if the new  
name entered is the same as the old name).  
» Press STO to store the new name; the message  
STORED will appear. If stored, the new name is  
written to the NAM data and stored in the alphanu-  
meric part of location 99 (having no effect on the  
numeric part).  
If you attempt to store a different phone number in mem-  
ory location 99, the message NOT ALLOWED will be  
displayed, and the number and name will not be stored.  
28  
MENU FUNCTIONS  
USING THE MENU  
The menu allows you to:  
– view the current setting of certain functions, and to  
change the setting of any function to one of the  
options offered,  
– view information.  
There are two methods of accessing menu functions:  
– ‘menu’ method (press MENU, use or and press  
STO).  
– ‘shortcut’ method (press MENU and enter a function  
number).  
See menu method below and shortcut method on the  
next page.  
The number of the menu function currently selected is  
shown in the upper right corner of the display.  
Some menus are ‘secure’, and you must enter the lock  
code or security code before you can access them.  
On selecting a menu of this type, you will be prompted  
with one of these messages:  
LOCK CODE? – you should enter your 4-digit lock  
code (default 1234) and then press STO, or  
SECURITY? – you should enter your 5-digit security  
code (default 12345), and then press STO.  
Normally, your dealer will give you these code numbers  
when you purchase the phone. It will be helpful to me-  
morize them. Do not leave them written where they can  
be recognized. You may change the lock code, using  
menu 11, but you cannot change the security code.  
To access the menu using the menu method:  
³ Press MENU. The USE  
TO VIEW message  
prompts you to scroll the menus.  
· Press or to scroll the functions until the one  
you want is displayed.  
» Press STO to select the function.  
If prompted, enter the lock code or security code,  
and press STO.  
29  
The option currently selected, or status, may be  
displayed.  
¿ To change the setting to any of the options  
offered, press or to scroll through the options  
until the one you want is displayed.  
´ To select the option displayed (or to accept the  
lock code or security code entered), press STO.  
² To quit the menu function, without changing the  
setting, press CLR (or wait for the timeout).  
To access the menu using the shortcut method:  
³ Press MENU, then enter the number of the menu  
function required (see ‘List of Menu Functions’,  
on the next page).  
· If prompted, enter the lock code or security code,  
and press STO.  
The option currently selected, or status, may be  
displayed (the menu function name is not displayed  
first, when using the shortcut method).  
When selecting menu 1 or menu 2: there will be a  
short pause before the options currently selected for  
these menus appear.  
» To change the setting to any of the options  
offered, press or to scroll the options until the  
one you want is displayed.  
¿ To select the option displayed (or to accept the  
lock code or security code entered), press STO.  
´ To quit the menu function, without changing the  
setting, press CLR (or wait for the timeout).  
30  
LIST OF MENU FUNCTIONS  
Menu Name  
Shortcut Keys Description  
LOCK PHONE  
SYSTEM SELECT  
MENU 0 (L) Locks/unlocks the phone.  
MENU 1  
MENU 2  
MENU 3  
MENU 4  
MENU 5  
Selects roaming mode  
(system feature).  
RINGING TYPE  
CALL TIMERS  
Selects the ringing tone  
type.  
Displays length of calls.  
(S) Resets the timers.  
LIGHTS CONTROL  
KEYPAD TONES  
Selects operation of display  
and keypad lights.  
Switches keypad  
tones on/off.  
RINGING VOLUME MENU 6  
Selects volume of ringing  
tone.  
NAM SELECT  
MENU 7  
MENU 8  
Displays and selects  
cellular number/network.  
AUTO ANSWER  
Sets automatic answer  
on/off.  
ACCESSORY MENU MENU 9  
CLEAR LAST CALL MENU 1 0  
Controls accessories  
connected to the phone.  
Sets the last-called numbers  
to be cleared or retained  
when phone is switched off.  
CHANGE LOCK CODE MENU 1 1 (S) Allows you to change lock  
code.  
DATA MODE  
MENU 1 2  
Selects data mode (in a call).  
EMERGENCY 9 KEY MENU 1 3 (L) Sets 9 key on/off for one-  
touch dialing of emergency  
calls.  
CALL BARRING  
MEMORY LOCK  
MENU 1 4 (S) Sets call restrictions.  
MENU 1 5 (S) Sets memory access  
restrictions.  
ACTIVATE KEYGUARD MENU ABC Locks/unlocks the keypad.  
or MENU 1 6  
SEND DTMF  
MENU SEND Sends DTMF tones (in a  
or MENU 1 7 call).  
31  
SID SCREEN  
MENU 1 8 (L) Selects SID to on/off.  
NOTE: Menu 18 is avail-  
able only if SID information  
has been programmed into  
the selected NAM by your  
dealer.  
(L) = requires entry of 4-digit lock code (default is 1234).  
(S) = requires entry of 5-digit security code (default is 12345).  
DESCRIPTION OF MENU FUNCTIONS  
You may access any of the menu functions by either  
the menu or shortcut method. For simplicity, in each of  
the following descriptions of menu functions, only the  
shortcut method is described.  
Lock Phone (Menu 0)  
You can lock your phone, using a four digit lock code,  
to help prevent unauthorized use.  
If you forget your lock code, you can change it using  
menu 11.  
When the phone is locked:  
– No outgoing calls can be made, but calls may be  
possible to the emergency number programmed  
into your phone (e.g. 911, 112 or other official emer-  
gency number), including calls by one key emer-  
gency dialing (‘the 9 key’).  
– Calls can be received, as usual.  
– Memory locations cannot be viewed or changed.  
To lock, or unlock, the phone:  
³ Press MENU 0. The message LOCKCODE?  
prompts you to enter your lock code.  
· Enter your 4-digit lock code (default 1234). It will  
be displayed as asterisks (****).  
» Press STO to confirm your entry.  
Once locked, you can unlock the phone by repeating  
the procedure described above.  
32  
If you make a mistake when locking or unlocking the  
phone, the message CODE ERROR will be displayed.  
In this instance, start again from the beginning.  
On entering the correct lock code:  
– When locking the phone, the message LOCKED will  
be displayed, and will remain to remind you that the  
phone is locked.  
– When unlocking the phone, the message  
UNLOCKED will appear briefly.  
For other options, which provide more-selective  
restrictions, you may use the Call Barring function  
(Menu 14), page 41, or the Memory lock function  
(Menu 15), page 42.  
System Select (Menu 1)  
Each cellular service area can have two cellular  
service suppliers, called carriers. One carrier operates  
the ‘A’ system, and the other carrier operates the ‘B’  
system (these systems are generally known as  
‘non-wireline’ and ‘wireline’, respectively). Your phone  
is designed to work with both carriers.  
This menu function allows you to program your phone  
for optimum operation when in your home service  
area or when away from your home area (this is called  
roaming). You may select any of the following roaming  
modes:  
System A NAM System B NAM  
Selected*  
Selected*  
HOME AREA  
HOME AREA  
The phone uses only the  
home area and home system.  
BOTH SYSTEMS BOTH SYSTEMS The phone uses either sys-  
tem A or B, whichever is the  
stronger signal.  
HOME TYPE A HOME TYPE B The phone uses only the  
home system.  
NON-HOME  
TYPE B  
NON-HOME  
TYPE A  
The phone uses only the  
non-home system.  
*The home system depends on the current NAM  
selection; refer to ‘NAM Select (Menu 7)’, page 37.  
33  
When you buy your phone, you may register (receive a  
phone number) with either or both of your local carriers.  
Contact the office of your home cellular phone company  
for information about the roaming agreements they  
have with other cellular phone companies.  
In some areas, roaming telephones are automatically  
recognized by the cellular system. In other areas, you  
must contact the cellular phone operator before the  
system can recognize your phone. The company  
needs to know your telephone number, the ESN  
(Electronic Serial Number) of your phone, and how  
you plan to pay for your calls. There is usually an  
additional charge for roaming calls.  
NOTE: The ESN can be found on the phone’s label  
inside the battery compartment.  
To select the roaming mode:  
³ Press MENU 1. (Wait for the currently selected  
option to appear.)  
· Press or to select the roaming mode you  
prefer.  
» Press STO to confirm the setting. The phone will  
use this setting in a few seconds.  
For the function of the ROAM indicator on the display,  
refer to ‘Display Indicators’, page 7.  
Ringing Type (Menu 2)  
This function allows you to select, and demonstrate,  
any one of the five types of ringing tones:  
– the standard tone (STANDARD), or  
– one of four optional tones (OPTIONAL 1, 2, 3 or 4).  
To select the ringing tone:  
³ Press MENU 2. (Wait for the currently selected  
option to appear.)  
· Press or to choose the type you prefer.  
» Press STO to confirm the setting.  
34  
Call Timers (Menu 3)  
This function allows you to check the duration of the  
calls you have made, on the currently-selected NAM  
(phone number), and to reset the call timers.  
You may display three call timers; shown in hours,  
minutes and seconds:  
– Duration of the current or last call (LAST .. : .. : ..).  
– Duration of all calls you have made on the currently  
active NAM except the current call (TOTAL .. : .. : ..).  
– Non-resetable timer showing duration of all calls you  
have made on the currently active NAM except the  
current call (LIFE .... : ..).  
You can use the RESET TIMERS option to reset the  
LAST and TOTAL timers.  
The LIFE timer can not be reset.  
To display the call timers, or reset the call timers:  
³ Press MENU 3. The duration of the current or last  
call will be displayed (LAST .. : .. : ..).  
· Press once to display TOTAL, twice to display  
LIFE, and three times to display RESET TIMERS.  
Note: LIFE timer may also be accessed by pressing  
and holding the MENU key for 4 seconds.  
To reset the call timers:  
³ With the message RESET TIMERS displayed,  
press STO. The message SECURITY? prompts  
you to enter your security code.  
· Enter the 5-digit security code (default 12345),  
and press STO. On entry of the correct code, the  
message TIMERS CLEARED will be displayed to  
confirm that the timers have been set to zero.  
If you entered an incorrect security code, the  
message CODE ERROR will appear; in this  
instance, repeat the above procedure.  
NOTE: The call timers are designed to give an  
approximate indication, and may not reflect actual  
network usage.  
The current timer does not update during a call.  
35  
Lights Control (Menu 4)  
This function allows you to select the operation of the  
keyboard and display illumination. To conserve battery  
power, set to LIGHTS OFF.  
When set to LIGHTS ON:  
If the phone is used as a handportable, or is  
connected to a charger: The lights switch on when a  
key is pressed; they remain on for 15 seconds after  
the last keypress, then switch off.  
If the phone is connected to a car kit: The lights are  
on continuously.  
When set to LIGHTS OFF:  
If the phone is used as a handportable, or is  
connected to a charger: The lights are continuously  
off.  
If the phone is connected to a car kit: The lights  
switch on when a key is pressed; they remain on for  
15 seconds after the last keypress, then switch off.  
To set operation of lights:  
³ Press MENU 4.  
· Press or to select LIGHTS ON or LIGHTS OFF.  
» Press STO to confirm the setting.  
Keypad Tones (Menu 5)  
This function allows you to set the keypad tones on or  
off.  
When set to TONES ON, a tone will be heard with  
each keypress. When set to TONES OFF, no keypress  
tone will be heard.  
To set keypad tones on or off:  
³ Press MENU 5.  
· Press or to select TONES ON or TONES  
OFF.  
» Press STO to confirm the setting.  
36  
If the phone is connected to a car kit:  
The options will be different; you may select one of  
three volume levels (VOLUME LEVEL 1, 2, 3) as well  
as TONES OFF (press or to select).  
DTMF tones can be sent (when in a call) even if the  
keypad tones are switched off.  
Ringing Volume (Menu 6)  
This function allows you to select and demonstrate the  
ringing volume level, or set it to off. You may select:  
RINGING LOW: Quiet ringing tone.  
RINGING HIGH: Loud ringing tone.  
SILENT SERVICE: No ringing tone; instead, when  
an incoming call is received, only a short beep will  
be heard, and the lights will flash. The message  
SILENT will be displayed (when you are not entering  
digits) to remind you that there will be no ringing  
tone. All other tones (including keypress tones),  
except warning tones, will be switched off.  
To set ringing volume level:  
³ Press MENU 6.  
· Press or to select the option you want.  
» Press STO to confirm the setting and hear a  
sample of the volume level.  
If the phone is connected to a car kit:  
The options will be different; you may select one of five  
volume levels (RINGING LEVEL 1, 2, 3, 4, 5) as well  
as SILENT SERVICE (press or to select) and  
STO to confirm.  
NAM Select (Menu 7)  
The phone has a two-number capability which lets you  
subscribe to competitive cellular services in your area  
and other cities. Your phone can be programmed (by  
your dealer) with up to two numbers; each is stored in  
a NAM (Number Assignment Module).  
This menu function allows you to select either of your  
numbers (if two have been programmed).  
37  
NOTE: You cannot change from one network (number)  
to the other during a call (if you do attempt to change  
the network, the message CALL IN PROGRESS will  
be displayed, and no action will result). If you are only  
registered on one network you cannot access the other.  
To display your number, or change the network/number:  
³ Press MENU 7. The telephone number which the  
phone is currently using will be displayed.  
· Press or to select the other number/network.  
» Press STO to confirm. The phone will use this  
setting in a few seconds.  
Auto Answer (Menu 8)  
The Auto Answer function has 2 options: AUTO ON  
and AUTO OFF.  
If AUTO ON is selected when the phone is connected  
to a Handsfree Car Kit and is in handsfree mode, the  
phone will automatically anwer a call after the first ring.  
It does this by switching from standby to talk mode.  
To set auto-answer on or off:  
³ Press MENU 8.  
· Press or to select AUTO ON or AUTO OFF.  
» Press STO to confirm the setting.  
Accessory Menu (Menu 9)  
This function allows you to control accessories con-  
nected to the phone via a Handsfree Car Kit.  
To select the accessory menus:  
³ Press MENU 9. If no accessories are connected,  
or an accessory having no associated menu is  
connected, the message NONE PRESENT is dis-  
played. If you have one or more accessories con-  
nected, the name of the first accessory is shown.  
· If you have more than one accessory connected,  
press or to scroll the accessory list, until you  
find the accessory whose setting you wish to change.  
» Press STO to select the desired accessory menu,  
then press or to scroll the options.  
38  
¿ To store the new setting in memory press STO.  
The messages generated by specific accessories will  
be found in the respective user guides supplied with  
them.  
Clear Last Call (Menu 10)  
This function allows you to set the phone to clear, or  
retain, (automatically) the last numbers dialed when the  
phone is switched off. The phone automatically stores  
the last five numbers dialed; refer to ‘Last Number  
Redial’, page 17, for further details.  
To clear or retain the last numbers dialed:  
³ Press MENU 1 0.  
· Press or to select CLEAR LAST ON (to clear  
the numbers) or CLEAR LAST OFF (to retain the  
numbers).  
» Press STO to confirm the setting.  
Change Lock Code (Menu 11)  
This function allows you to change the lock code of  
your phone. (You will need to enter your security code  
in order to change the lock code.)  
To change the lock code:  
³ Press MENU 1 1. The message SECURITY?  
prompts you to enter your security code.  
· Enter the five-digit security code (default 12345),  
and press STO. If you entered an incorrect code,  
the message CODE ERROR will appear. When  
you have entered the correct security code, the  
message NEW CODE? prompts you to enter your  
new lock code.  
» Enter the new four-digit lock code and press STO.  
The code may contain numeric digits only; other  
characters (e.g. #, ) are not allowed. The mes-  
*
sage STORED confirms that the new lock code  
has been set.  
39  
Data Mode (Menu 12)  
This function allows you to send data, while in a call.  
Your phone must be connected to a Handsfree Car Kit  
or a data-compatible accessory in order to send data.  
To send data:  
³ Press MENU 1 2. You must have a call in progress,  
otherwise the message NO CALL ACTIVE is dis-  
played. When the phone is in data mode, the  
message DATA ACTIVE is displayed.  
For further information on sending and receiving data,  
refer to the user guide supplied with your data adaptor.  
Emergency 9 Key (Menu 13)  
This function allows you to set the one-touch dialing  
function for the emergency key (9) to on or off:  
ON Allows you to make an emergency call by  
pressing and holding 9 for 2-3 seconds.  
NOTE: Official emergency numbers vary by  
location (e.g. 911, 112 or other official emer-  
gency number). However, only one emergency  
number is programmed into your phone to be  
dialed automatically by one key emergency  
dialing, which may not be the proper number in  
all circumstances. One key emergency dialing  
does not operate when the keyguard feature  
is in use.  
OFF Disables the ability to make an emergency call  
using the 9 key. This setting may be useful to pre-  
vent making unwanted emergency calls (e.g. by  
accidentally holding the key), without having to  
disable all keys by setting keyguard to on.  
NOTE: The factory setting for this option is OFF.  
To set the emergency key to on or off:  
³ Press MENU 1 3. The message LOCKCODE?  
prompts you to enter your lock code.  
· Enter your 4-digit lock code (default 1234). The  
number will be displayed as asterisks (  
then press STO. If the correct lock code has  
been entered, the currently-selected option will  
be displayed.  
****),  
40  
» Press or to select EMERGENCY 9 ON or  
OFF.  
¿ Press STO to confirm the setting.  
Call Barring (Menu 14)  
This function allows you to restrict certain types of  
calls:  
No Restrict (ALLOW ALL)  
The phone operates normally (no call restrictions).  
International Call Barring (ALLOW NATIONAL)  
International calls cannot be dialed (see note below).  
All other outgoing calls and incoming calls are allowed.  
NOTE: This option only restricts calls having a specific  
international dialing prefix, as programmed by your  
dealer. If any other international prefix is in use on your  
system, and you dial that prefix, then you will still be  
able to make international calls, even if this option is  
selected. With this option selected, it may still be  
possible to make any international call via the operator.  
Local Only (ALLOW LOCAL)  
Only calls to local numbers having seven digits (or  
less) and emergency calls can be made (emergency  
calls can be made by normal dialing or by using one-  
touch (9) dialing). Incoming calls are allowed.  
NOTE: With this option selected, it may still be  
possible to make any call via the operator.  
Memory Calls Only (ALLOW M90-M95)  
Only calls to numbers stored in memory locations 90  
to 95 and emergency calls can be made (emergency  
calls can be made by normal dialing or by using  
one-touch (9) dialing). You may recall numbers from  
locations 90 to 95, but will not be permitted to store  
numbers to these locations. Incoming calls are  
allowed.  
NOTE: This option effectively takes memories 90 to 95  
out of the memory locking scheme (Menu 15), and  
makes them readable. These memories will be read-  
able, even if the MEM NO ACCESS Memory Lock  
option is selected. The Lock Phone function (Menu 0),  
41  
page 32, however, sets all call restrictions and locking  
so that no memories are accessible.  
All these options will be temporarily overridden if the  
phone is locked (to lock the phone, use Menu 0),  
page 32.  
To set the call barring option:  
³ Press MENU 1 4. The message SECURITY?  
prompts you to enter your security code.  
· Enter your 5-digit security code (default 12345).  
The number will be displayed as asterisks  
(*****), then press STO. If the correct code has  
been entered, the currently-selected option will be  
displayed.  
» Press or to select the call barring option you  
prefer.  
¿ Press STO to confirm the setting.  
Note: When calls are restricted, calls may be possible  
to the emergency number programmed into your  
phone (e.g. 911, 112 or other official emergency  
number). However, one key emergency dialing  
('the 9 key') may not operate depending on the type  
of restriction you chose.  
Memory Lock (Menu 15)  
This function allows you to restrict access to all memory  
locations:  
MEM NORMAL  
The phone operates normally (no memory restrictions).  
MEM READ ONLY  
Storing is not allowed to any location (but any location  
can be recalled).  
MEM NO ACCESS  
Storing or recalling is not allowed (all locations).  
NOTE: This option will be partially overridden if the  
ALLOW M90-M95 Call barring option (Menu 14), page  
41, is selected.  
To set the memory-locking option:  
³ Press MENU 1 5. The message SECURITY?  
prompts you to enter your security code.  
42  
· Enter your 5-digit security code (default 12345).  
The number will be displayed as asterisks  
(*****), then press STO. If the correct code  
has been entered, the currently-selected option  
will be displayed.  
» Press or to select the memory-locking option  
you prefer.  
¿ Press STO to confirm the setting.  
You may recall your own number (in location 99), at  
any time, regardless of the MEM NO ACCESS memory  
locking option.  
You cannot use the memory linking function to link to a  
memory that is barred from recall by the MEM NO  
ACCESS option.  
For (limited) access to memories 90 to 95 only, use the  
Call barring function (Menu 14), page 41. Select the  
ALLOW M90-M95 option to allow recall (only) of loca-  
tions 90 to 95 inclusive, regardless of the Memory  
Lock option selected. The ALLOW M90-M95 option  
thus gives some override to the Memory Lock MEM  
NO ACCESS restrictions.  
Keyguard (Menu 16)  
The phone’s keypad may be locked to prevent unin-  
tended keypresses from being made when the phone  
is in a pocket or a bag. No security code is required to  
activate or deactivate the keyguard feature.  
To activate the keyguard:  
³ Press and hold the END key. You can also acti-  
vate the keyguard by first pressing the MENU key  
and then the ABC key.  
The message KEYGUARD ACTIVE remains on the  
display until the keyguard is deactivated.  
When you press a key, the phone prompts you to  
press the MENU key (PRESS MENU).  
To deactivate the keyguard:  
³ Press the MENU key first and then the ABC key.  
(at NOW PRESS ABC prompt).  
43  
The message KEYGUARD OFF is briefly displayed  
indicating that the keyguard has now been deactivated.  
When keyguard is activated:  
To answer a call, press the SEND key. During the  
call, the keypad remains unlocked and the phone  
can be operated in the normal way.  
To end a call, press the END key. After the call is  
ended, the keyguard automatically becomes active  
again.  
The phone can not be switched off before the key-  
guard is deactivated.  
Note: When the keyguard is activated, calls may be  
possible to the emergency number programmed into  
your phone e.g., 911 or another official emergency  
number). However, one-touch emergency dialing  
(‘the 9 key’) does not operate.  
Send DTMF (Menu 17)  
You can transmit numerical information as a series  
of tones, using the DTMF facility (e.g. to check for  
messages in your answering machine). There are two  
ways to send DTMF tones:  
Manual Dialing:  
³ Make the call in the usual way.  
· When the call has been answered, enter the  
numbers. Each number is sent immediately, as a  
DTMF tone. The length of the tone depends on  
how long you press the key.  
Automatic Dialing:  
³ Make the call in the usual way.  
· When the call has been answered, use the RCL key  
to recall a stored ‘DTMF’ number from a memory  
location (e.g. for location 23, press RCL 2 3).  
» To send the whole number (displayed) as DTMF  
tones, press MENU SEND, or MENU 1 7. A series  
of tones, each tone representing a digit of the  
DTMF number, will be heard.  
The special characters ‘+’, ‘p’ and ‘w’ are used for  
DTMF dialing; these are available on the key.  
*
44  
To place a pause between DTMF digits (when  
entering the number):  
Press  
. The ‘p’ character will be displayed.  
* * *  
When the DTMF number is sent, a pause of 2.5  
seconds will be inserted automatically.  
To place a ‘wait’ character (when adding a DTMF  
string to a phone number, or requiring a ‘wait’  
within a DTMF string):  
It is necessary to place a ‘wait’ character (‘w’) between  
a phone number and the subsequent DTMF string.  
In addition, you may include a ‘w’ character at any  
point in a DTMF string, if required.  
On reaching each ‘w’ character, the phone ‘waits’ for  
you to press SEND. On pressing SEND, the phone will  
automatically send as DTMF all the numbers or digits  
following the ‘w’ (until the next ‘w’, if any, is reached).  
You can also press MENU SEND or MENU 17 at this  
point to send DTMF.  
To enter a wait character (to precede a DTMF string,  
or within the string):  
³ Recall the phone number, or enter the number, as  
appropriate.  
. The ‘w’ (wait) character will be  
· Press * * **  
displayed, after the phone number.  
» Enter the DTMF number (i.e. after the ‘w’  
character).  
¿ To enter a ‘w’ character within the DTMF number,  
.
press * * **  
´ Store the whole sequence in a memory location.  
To send DTMF numbers:  
³ Recall the phone number from memory using the  
RCL key.  
· Make the call in the usual way (i.e. press SEND).  
» When the call has been answered, press SEND  
again to send the DTMF number.  
¿ If any further wait character is encountered, within  
the DTMF string, press SEND again to send the  
remaining part of the DTMF string.  
´ To stop DTMF sending, press CLR.  
45  
Note that when the keypad tones are switched off, the  
DTMF tones are still sent, even though they cannot be  
heard.  
To join two memory locations, in order to send a  
long DTMF string:  
³ Recall the phone number to the display (the loca-  
tion in which this is stored is called the ‘first’  
location, in these instructions).  
. The ‘+’ character will be displayed,  
after the phone number.  
· Press * *  
» Enter the number (one or two digits) of a ‘second’  
memory location which is to be linked to that  
already selected. Store the new contents in the  
‘first’ location.  
¿ Press **** to enter a ‘w’ character followed by  
the DTMF string and store in the ‘second’ memory  
location.  
To make a call using the two joined locations:  
³ Recall the ‘first’ location, and press SEND. This  
dials the phone number, but the dialing sequence  
stops on reaching the ‘+’ character.  
· When the call is established, press SEND. This will  
cause the phone to send automatically the DTMF  
sequence in the ‘second’ location.  
NOTE: ‘+’, ‘p’ and ‘w’ cannot be keyed while in a call;  
pressing will send a DTMF tone only.  
*
SID Screen (Menu 18) – Only available in models  
where this feature is available  
System Identity (SID) information can be programmed  
into the phone by your dealer (the identities of specific  
networks on which the phone will operate can be  
programmed into each NAM).  
NOTE: This menu will appear only if SID information  
has been programmed into the selected NAM  
(use Menu 7 to select a NAM).  
You may set the ‘SID Screen’ function to on or off  
(SID SCRN ON/OFF). Depending on (1) the pro-  
grammed information, (2) the system selected  
(using Menu 1), and (3) the actual availability of  
networks in your area, setting SID to on or off will  
provide the following conditions:  
46  
SID SCRN ON: Your phone will attempt to select  
one of the dealer programmed (e.g. low cost) pre-  
ferred types of networks. However, you may experi-  
ence poor call quality if only distant networks of this  
type are available. If no preferred service is available  
on this type of network, then the message SID  
SCRN BARRED will appear, and the NO part of the  
NO SVC indicator will flash. In this instance, you may  
be able to make emergency calls (depending on  
the network and the emergency number pro-  
grammed into your phone) but will not be able to  
make any other calls, or receive any calls.  
Note: When SID SCRN is set to on, ‘System Select  
(Menu 1)’ will automatically be set to “Both Systems”.  
SID SCRN OFF: You will always obtain the highest-  
quality call possible. However, the phone may roam,  
and the cost of calls when roaming may be greater  
(refer to ‘System Select (Menu 1)’, page 33).  
To set SID to on or off:  
³ Press MENU 1 8. The message LOCKCODE?  
prompts you to enter your lock code.  
· Enter your 4-digit lock code (default 1234).  
The number will be displayed as asterisks  
****,  
then press STO. On entry of the correct code, the  
currently-selected option will be displayed.  
» Press or to select SID SCRN ON or OFF.  
¿ Press STO to confirm the setting. The phone will  
use this setting in a few seconds.  
Hook Flash Function and 3 Party Calls  
Your cellular system may offer a ‘hook flash’ (call  
waiting) service. This system feature lets you accept a  
second call when you already have a call in progress.  
Your cellular system may also offer a ‘3 Party Call’  
service. This system feature lets you make a second  
call when you already have a call in progress. It also  
allows you to link the first and second call so that all  
3 parties can converse.  
Contact your cellular service provider for further  
details.  
47  
BATTERY INFORMATION  
Installing/removing the battery  
Refer to ‘Installing the Battery’ (page 8). Always switch  
off the phone before removing the battery.  
Charging Information  
Remember that you must charge the battery before  
you can use the phone. After its initial charging, a  
battery may be charged with the phone switched on  
or off; charging will be slightly faster with the phone  
switched off. You can use the phone while the battery  
is being recharged.  
TO ACHIEVE FULL BATTERY  
CAPACITY, NEW BATTERIES  
MUST BE CHARGED  
WITH THE PHONE OFF  
FOR AT LEAST 24 HOURS  
BEFORE INITIAL USE.  
STOP  
Standby and Talk Times  
Approximate standby and talk times, for fully-charged  
batteries:  
Standby  
Battery Type  
Talk time  
time  
*Slim NiCd 380mAh  
(BTH-8S)  
50 minutes  
10 hours  
Slim NiMH 550mAh  
(BTH-8SM)  
70 minutes  
15 hours  
Extended NiCd 800mAh  
(BTH-8H)  
110 minutes 26 hours  
150 minutes 32 hours  
Ultra Extended NiMH  
1100mAh (BTH-8HM)  
*Subject to availability.  
NOTE:  
³ Note that a new battery's full performance is  
achieved only after two or three complete charge  
and discharge cycles!  
· Standby time will be reduced by approximately  
1 hour for every 6 minutes of talk time.  
48  
» The battery can be charged and discharged hun-  
dreds of times but it will eventually wear out.  
When the operating time (talk-time and standby  
time) is noticeably shorter than normal, it is time to  
buy a new battery.  
¿ Use only batteries approved by the phone manu-  
facturer and recharge your battery only with the  
chargers approved by the manufacturer. When a  
charger is not in use, disconnect it from the power  
source. Do not leave the battery connected to a  
charger for longer than a week, since overcharging  
may shorten its life. If left unused a fully charged  
battery will discharge itself in about a week at  
room temperature.  
´ For good operation times, discharge the battery  
from time to time by leaving your phone switched  
on until it turns itself off (or by using the battery  
discharge facility of any approved accessory  
available for your phone). Do not attempt to  
discharge the battery by any other means.  
² Temperature extremes will affect the ability of  
your battery to charge: it may require cooling or  
warming first.  
Use the battery only for its intended purpose.  
º Never use any charger or battery which is  
damaged or worn out.  
¾ Do not short circuit the battery. Accidental short  
circuiting can occur when a metallic object  
(coin, clip or pen) causes direct connection of the  
+ and - terminals of the battery (metal strips on  
the back of the battery) for example when you  
carry a spare battery in your pocket or purse.  
Short circuiting the terminals may damage the  
battery or the connecting object.  
µ Leaving the battery in hot or cold places, such as  
in a closed car in summer or winter conditions,  
will reduce the capacity and lifetime of the battery.  
Always try to keep the battery between 15° C and  
25° C (59° F and 77° F). A phone with a hot or cold  
battery may temporarily not work, even when  
the battery is fully charged. NiMH batteries  
performance is particularly limited in temperatures  
below -10°C (14° F).  
49  
¸ Dispose of used batteries in accordance with local  
regulations. Recycle! Do not dispose of batteries  
in a fire!  
Battery Charge Indicator  
The battery charge indicator on the display shows the  
approximate level of charge. The indicator consists of  
a number of bars; the more bars showing, the greater  
the remaining charge.  
Battery  
Charge  
Indicator  
S
ON  
B
Non-charging indication  
If the battery is too hot or cold the bars on the battery  
charge indicator will flash (and the battery will not be  
charged).  
Low-Battery Indication  
When the charge falls to approximately 5% of the  
battery’s capacity, the message BATTERY LOW is  
displayed and the phone beeps once. This warning is  
repeated every five minutes if the phone is in standby  
mode, or every minute if in a call.  
When the battery is fully discharged, the message  
RECHARGE BATTERY is displayed and the phone  
beeps three times. The phone then switches off  
automatically.  
Battery Performance  
Batteries will last longer and perform better if allowed  
to discharge fully at least once a week. You can do  
this by leaving the phone switched on overnight  
(or longer for an Extended Battery, type BTH-8H or an  
Ultra Extended Battery BTH-8HM), until the message  
RECHARGE BATTERY is displayed and the phone  
switches off. Alternatively, you can use the deep-  
discharge facility if this is available on your (optional)  
Compact Desktop Charging Stand CHH-6F.  
Storage  
When a battery is not in use, store it uncharged in a  
cool, dark and dry place. If left unused, a fully-  
charged battery will discharge itself in a few weeks at  
room temperature.  
50  
REFERENCE INFORMATION  
LIST OF DISPLAY MESSAGES  
AUTO PWR OFF  
Phone is installed in a car kit with ignition sense  
connected. When ignition is switched off, this  
message appears, and the phone will switch off  
automatically in 5 seconds.  
BATTERY LOW  
Appears when battery charge is down to approximately  
5% of the battery’s capacity, then every 5 minutes if  
phone is in standby mode, or every minute if it is in a  
call.  
CALL  
Indicates that you are receiving a call, or have not  
answered an incoming call.  
CALL IN PROGRESS  
Appears if you try to change from one cellular network  
to another in mid call.  
CODE ERROR  
Indicates that you have entered an invalid lock code or  
security code.  
DATA ACTIVE  
The phone is in data mode.  
EMPTY  
Displayed when you try to recall information from an  
empty memory location.  
KEYGUARD ACTIVE  
The keyguard function is switched on.  
KEYGUARD OFF  
The keyguard function is switched off.  
LOCATION FULL  
The memory location to which you are trying to move  
information is already occupied.  
LOCK CODE?  
Enter your 4-digit lock code (default 1234).  
LOCKED  
The phone is locked.  
51  
MOVE NAME?  
Displayed if you are trying to store a name which  
already exists, or are moving stored contents which  
include a name.  
NAM ERROR  
The NAM contains erroneous data; contact your dealer.  
NAME?  
Enter a name (you have selected alpha mode).  
NAME TOO LONG  
The name you have entered will not fit completely in  
the memory location and will be truncated (press STO  
again to accept the shortened name).  
NEW CODE?  
Enter a new lock code.  
NONE PRESENT  
There are no accessories connected to the phone.  
NO CALL ACTIVE  
Data mode cannot be used as there is no call in progress.  
NO ROOM FOR NAME  
The associated number in the selected memory  
location is too long to allow space for a name  
(press STO again to proceed).  
NO SERVICE  
Appears if you try to make a call when no cellular  
service is available.  
NO SPACE  
Indicates that all memory locations are full.  
NOT ALLOWED  
Indicates that you have tried to store a number in an in-  
valid memory location (e.g. 00) or call a barred number.  
NOT FOUND  
Indicates that the name you are trying to recall does  
not exist.  
PRESS ‘MENU’ and NOW TYPE ABC’  
A key was pressed while keyguard was active; to  
switch off keyguard, press MENU then ABC.  
RECALL  
Prompts you to enter the desired memory location num-  
ber, when wishing to recall information from the memory.  
52  
RECHARGE BATTERY  
Appears for 10 seconds before the phone switches off  
automatically.  
REPLACE CONTENT?  
Indicates that the memory location in which you are  
trying to store is already in use.  
SECURITY?  
Enter the security code (default 12345).  
SILENT  
Indicates that the ringing tone is switched off  
(i.e. ‘SILENT SERVICE‘ option is selected).  
SID SCRN BARRED  
(NO flashes, SVC steady)  
No service is available due to SID function (Menu 18).  
To attempt to regain service, set SID SCRN to OFF.  
STORE  
Prompts you to enter a memory location number, when  
storing or deleting contents.  
STORE NOT DONE  
Indicates that you chose not to store new information  
in a memory location that was already occupied.  
STORED  
Indicates that storing to memory was succesful.  
TIMERS CLEARED  
Indicates that call timers have been set to zero.  
UNLOCKED  
The phone has been unlocked.  
USE  
TO VIEW  
Indicates that you have entered the menu; press or  
to scroll the functions.  
VOLUME 1 through VOLUME 5  
Indicates the earpiece volume level selected.  
53  
LIST OF TONES  
Ringing Tone: This denotes an incoming call.  
The tone volume can be selected using Menu 6, and  
the ring-tone type can be selected using Menu 2.  
Keypress Tone: This (single) tone denotes a valid  
keypress.  
Re-order Tone: This (triple) tone indicates that your  
attempt to originate a call was unsuccessful  
(e.g. the network was busy) or your call has been  
terminated for some other reason.  
Low Battery Tone: This (single) tone denotes that the  
remaining battery charge is low. The BATTERY LOW  
message is displayed at the same time. The tone  
sounds every 5 minutes if phone is in standby mode,  
or every minute if in a call.  
Recharge Battery Tone: This (triple) tone denotes  
that battery charge is extremely low, and that the phone  
will no longer operate. The RECHARGE BATTERY  
message is displayed at the same time. The phone will  
switch off automatically within 10 seconds.  
Charger-connected Tone: This tone (single beep)  
denotes that a charger has been connected; charging  
may start. The tone will be heard even when phone is  
switched off.  
Auto Power-off Tone: In a car kit equipped with  
ignition sense, this tone denotes that the power will be  
switched off automatically. The AUTO PWR OFF  
message is displayed at the same time.  
Error Tone: This (long) tone indicates that cellular  
service cannot be obtained (e.g. you are not within  
the service area). In a car kit equipped with ignition  
sense, the tone denotes that the phone will switch off  
automatically in 5 seconds.  
54  
CARE AND MAINTENANCE  
Your phone is a product of superior design and  
craftsmanship and should be treated with care.  
The suggestions below will help you to fullfill any  
warranty obligations and to enjoy this product for  
many years.  
Keep the phone and all its parts and accessories out  
of small children's reach.  
Keep the phone dry. Precipitation, humidity and liquids  
contain minerals that will corrode electronic circuits.  
Do not use or store the phone in dusty, dirty areas.  
Its moving parts can be damaged.  
Do not store the phone in hot areas. High temperatures  
can shorten the life of electronic devices, damage  
batteries, and warp or melt certain plastics.  
Do not store the phone in cold areas. When the phone  
warms up (to its normal temperature), moisture can  
form inside the phone, which may damage electronic  
circuit boards.  
Do not attempt to open the phone. Non-expert  
handling of the phone may damage it.  
Do not drop, knock or shake the phone. Rough  
handling can break internal circuit boards.  
Do not use harsh chemicals, cleaning solvents, or  
strong detergents to clean the phone. Wipe it with a  
soft cloth slightly dampened in a mild soap-and-water  
solution.  
If the phone or any of its accessories are not working  
properly, take them to your nearest qualified service  
facility. The personnel there will assist you, and if  
necessary, arrange for service.  
TROUBLESHOOTING  
If the power does not come on or stay on:  
– make sure that the battery is installed properly.  
– be sure that the contacts on the battery, and on the  
Desktop Stand (if used), are clean.  
55  
– watch and listen for the low battery warnings; the  
charge may be too low for the phone to operate.  
If the power comes on, but the phone does not work:  
– you may be out of the cellular service area  
(as denoted by the NO SERVICE message or  
NO SVC indicator being displayed).  
– make sure the antenna is fully extended.  
ACCESSORIES  
A range of accessories is available for your phone.  
Please consult your local dealer for availability of  
specific items, and advice. Certain accessories are  
described briefly on the following pages.  
IMPORTANT!  
Use only accessories approved by the phone  
manufacturer. The use of any other types will invalidate  
any approval or warranty applying to the phone, and may  
be dangerous.  
Installation of complex car equipment must be completed  
by qualified personnel only.  
When you disconnect the power cord of any accessory,  
grasp and pull the plug, not the cord.  
Batteries  
*Slim NiCd, 380mAh  
(BTH-8S).  
Slim NiMH, 550mAh  
(BTH-8SM).  
Extended NiCd, 800mAh  
(BTH-8H).  
Ultra Extended NiMH,  
1100mAh (BTH-8HM)  
*Subject to Availability  
Refer to ‘Battery Information’, page 48, for further  
details.  
Nickel Cadmium and Nickel Metal  
Hydride batteries must be recycled or  
disposed of properly. Must not be  
disposed of in municipal waste.  
NiCd  
NiMH  
56  
AC Chargers  
Standard Travel Charger (ACH-3U)  
This light and compact AC charger is  
an economical charging option. For  
the approximate charging time for  
each of the different types of batteries,  
refer to ‘Charging the Battery’, page 8.  
To use the Standard Travel Charger,  
simply plug it into a standard AC  
outlet, and connect the lead from the  
charger to the bottom of the phone.  
NOTE: Do not attempt to use ACH-3U with Compact  
Desktop Charging Stand CHH-6F.  
Rapid Travel Charger (ACH-4U)  
This light and compact rapid AC  
charger is ideal for active users.  
For the approximate charging time  
for each of the different types of  
batteries, refer to ‘Charging the  
Battery’, page 8.  
To use the Rapid Travel Charger,  
simply plug it into a standard AC outlet, and connect  
the lead from the charger to the bottom of the phone.  
Desktop Stands  
Light Desktop Stand (CHH-6FL)  
The Light Destop Stand provides  
convenient desktop charging of  
the phone when used in conjunc-  
tion with a charger. The Light  
Desktop Stand is compatible  
with the Standard Travel Charger (ACH-3U) and the  
Rapid Travel Charger (ACH-4U). Plug the charger  
connector into the socket at the rear of the Light Desktop  
Stand and ensure that the phone is fitted properly.  
57  
Compact Desktop Charging Stand (CHH-6F)*  
The Compact Desktop Charging  
Stand allows you to charge both  
the phone and a spare battery.  
The spare battery will be charged  
after the phone battery has been  
charged.  
The Compact Desktop Charging  
Stand must be used in conjunction with a charger; use  
either the Rapid Travel Charger (ACH-4U) or the  
Rapid Cigarette Lighter Charger (LCH-2). Plug the  
charger connector into the socket at the rear of the  
Stand, and ensure that the phone and/or spare battery  
is/are properly fitted.  
A ‘deep discharge’ feature is provided. To discharge  
the spare battery, press the button on the Compact  
Desktop Charging Stand. When the battery is totally  
discharged, recharging starts automatically. (If you  
wish to stop discharging, press the button again to  
start the charging immediately.) Only the spare battery  
can be discharged. It is recommended that the battery  
is fully discharged at least once a week.  
The small LED indicates the charging status of the  
spare battery. The larger LED indicates the charging  
status of the phone battery.  
When the spare battery is discharging the LED  
flashes red.  
When the spare battery or phone is recharging  
(using fast charging), the relevant LED shows red  
(no flashing).  
When the spare battery or phone is 80% charged and  
ready to use, the steady red light changes to green.  
If you wish, you can now continue to charge the  
battery or phone to full capacity (using trickle  
charging), but this takes a few hours more.  
*Subject to Availability  
58  
Rapid Cigarette Lighter Charger (LCH-2)  
You can charge the phone  
battery from your vehicle’s  
cigarette lighter using the  
Rapid Cigarette Lighter  
Charger.  
The Rapid Cigarette Lighter Charger plugs into the  
cigarette lighter socket in your vehicle. Avoid pro-  
longed charging with the Rapid Cigarette Lighter  
Charger when the vehicle’s engine is not running,  
otherwise you may cause an undue drain on your  
vehicle battery. Note that, in some vehicles, the  
cigarette lighter socket is not powered while the vehicle  
ignition is switched off.  
A red light indicates charging, and a green light indi-  
cates that trickle charge has started and the phone is  
ready for use (check the charge on the phone display).  
While in a call, the light will alternate between red and  
green. Note that the input voltage range is from 10V to  
30V DC, negative grounding.  
Optional In-Car Accessories (Available Early 1997)  
Optional In-Car Accessories include the Mobile  
Holder (MBH-9F), the Compact Handsfree Car Kit  
(CARK-14F / CARK-43F) and the Complete Handsfree  
Car Kit (CARK-15F). For further details please refer to  
the Accessory brochure supplied with the phone.  
Functions which are available with the Complete  
Handsfree Car Kit (CARK-15F)  
Ignition Sense, Car Radio Mute. For further details  
regarding these functions please refer to the  
Accessory brochure supplied with the phone.  
Options available for the Complete Handsfree Car  
Kit (CARK-15F)  
Booster Kit (BSHK-2). For further details regarding this  
accessory please refer to the Accessory brochure  
supplied with the phone.  
Fax and Data Accessories  
The phone can be used in connection with various  
data acessories. For further details, please refer to the  
Accessory brochure supplied with the phone.  
59  
Accessories  
Accessory Menu (Menu 9) . . . . . . . . . . . . . . . . 38  
Booster Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59  
Car Radio Mute . . . . . . . . . . . . . . . . . . . . . . . . . 59  
Compact Desktop Charging Stand. . . . . . . . . . 58  
Fax and Data Accessories . . . . . . . . . . . . . . . . 59  
Ignition Sense . . . . . . . . . . . . . . . . . . . . . . . . . . 59  
Light Desktop Stand . . . . . . . . . . . . . . . . . . . . . 57  
Optional In-Car Accessories. . . . . . . . . . . . . . . 59  
Rapid Cigarette Lighter Charger. . . . . . . . . . . . 59  
Rapid Travel Charger . . . . . . . . . . . . . . . . . . . . 57  
Standard Travel Charger. . . . . . . . . . . . . . . . . . 57  
For additional accessories see the Accessory Options  
for Nokia 239 brochure.  
Auto Answer (Menu 8) . . . . . . . . . . . . . . . . . . . . . . . 38  
Battery  
Charge Indicator . . . . . . . . . . . . . . . . . . . . . . . . 50  
Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Installing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Low Battery Indication. . . . . . . . . . . . . . . . . . . . 50  
Non-charging Indication . . . . . . . . . . . . . . . . . . 50  
Standby/Talk Times. . . . . . . . . . . . . . . . . . . . . . 48  
Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50  
Calls  
Call Barring (Menu 14) . . . . . . . . . . . . . . . . . . . 41  
Clear Last Call (Menu 10) . . . . . . . . . . . . . . . . . 39  
Emergency Calls . . . . . . . . . . . . . . . . . . . . . . . . 13  
Making . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Receiving. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Care and Maintenance. . . . . . . . . . . . . . . . . . . . . . . 55  
Data  
Data Mode (Menu 12) . . . . . . . . . . . . . . . . . . . . 40  
Fax and Data Accessories . . . . . . . . . . . . . . . . 59  
Dialing  
Last Number Redial. . . . . . . . . . . . . . . . . . . . . . 17  
One-touch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Display Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Display Messages . . . . . . . . . . . . . . . . . . . . . . . . . . 51  
60  
DTMF Dialing  
Send DTMF (Menu 17) . . . . . . . . . . . . . . . . . . . 44  
Emergency Calls  
Emergency 9 Key (Menu 13). . . . . . . . . . . . . . . 40  
Hook Flash Function. . . . . . . . . . . . . . . . . . . . . . . . . 47  
Keyguard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
Keypad Tones (Menu 5). . . . . . . . . . . . . . . . . . . . . . 36  
Lights  
Lights Control (Menu 4). . . . . . . . . . . . . . . . . . . 36  
Memory  
Clearing Contents . . . . . . . . . . . . . . . . . . . . . . . 23  
Correcting Mistakes. . . . . . . . . . . . . . . . . . . . . . 22  
Displaying Hidden Numbers. . . . . . . . . . . . . . . 23  
Displaying Your Own Number. . . . . . . . . . . . . . 27  
Linking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
Memory Lock (Menu 15) . . . . . . . . . . . . . . . . . . 42  
Moving Contents . . . . . . . . . . . . . . . . . . . . . . . . 23  
Recalling by Location Number . . . . . . . . . . . . . 24  
Recalling by Name . . . . . . . . . . . . . . . . . . . . . . 25  
Reminder Message . . . . . . . . . . . . . . . . . . . . . . 27  
Scratchpad . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Scrolling for a Number. . . . . . . . . . . . . . . . . . . . 25  
Searching for a Name . . . . . . . . . . . . . . . . . . . . 25  
Storing Information . . . . . . . . . . . . . . . . . . . . . . 20  
Wake-Up Message . . . . . . . . . . . . . . . . . . . . . . 27  
Menus  
List of Functions. . . . . . . . . . . . . . . . . . . . . . . . . 31  
NAM Select (Menu 7) . . . . . . . . . . . . . . . . . . . . . . . . 37  
Ringing  
Ringing Type (Menu 2) . . . . . . . . . . . . . . . . . . . 34  
Ringing Volume (Menu 6) . . . . . . . . . . . . . . . . . 37  
Security  
Activate Keyguard (Menu 16) . . . . . . . . . . . . . . 43  
Call Barring (Menu 14) . . . . . . . . . . . . . . . . . . . 41  
Change Lock Code (Menu 11) . . . . . . . . . . . . . 39  
Lock Phone (Menu 0) . . . . . . . . . . . . . . . . . . . . 32  
SID Screen (Menu 18) . . . . . . . . . . . . . . . . . . . . . . . 46  
Signal Strength Indicator . . . . . . . . . . . . . . . . . . . . . 12  
System Select (Menu 1) . . . . . . . . . . . . . . . . . . . . . . 33  
Three Party Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . 47  
61  
Timers  
Call Timers (Menu 3) . . . . . . . . . . . . . . . . . . . . . 35  
Reset Timers . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55  
Volume Controls  
Earpiece Volume . . . . . . . . . . . . . . . . . . . . . . . . 12  
Keypad Tones (Menu 5) . . . . . . . . . . . . . . . . . . 36  
Ringing Volume (Menu 6) . . . . . . . . . . . . . . . . . 37  
62  
Only Nokia Genuine Accessories give you  
the kind of performance Nokia phones are  
famous for. Nokia Genuine Accessories –  
reliability and quality that’s the best choice  
for your phone.  
TECHNICAL INFORMATION  
Dimensions:  
5.8” x 2.1” x .91”  
Weight:  
7.9 oz with battery BTH-8S  
Transmitting Power: 0.6W +2dB -4dB ERP  
Operating Voltage: Internal battery: 6.0V DC  
Input to AC chargers: Type U 120V  
Input to Compact  
Handsfree Car Kit:  
10.8 to 16V DC  
10.8 to 16V DC  
Input to Complete  
Handsfree Car Kit:  
Input to Rapid  
Cigarette Lighter  
Charger:  
10 to 30V DC  
Frequency Band:  
824 to 849 MHz (TX)  
869 to 894 MHz (RX)  
USA  
NOKIA MOBILE PHONES – 6200 Courtney Campbell Causeway  
Suite 900, P.O. Box 30730, Tampa, FL 33607  
Tel: 1-800-666-5553  
CANADA  
NOKIA PRODUCTS LTD. – 575 Westney Rd. South,  
Ajax, Ontario L1S 4N7. Tel. (905) 427-6654  
ASIA/PACIFIC  
NOKIA (S.E.A.) Pte. Ltd. – 541 Orchard Road #12–01  
Liat Towers, Singapore 0923  
Nokia and the Arrows logo are registered trademarks of Nokia  
Corporation, Finland.  
Copyright © 1996 Nokia Mobile Phones. All Rights Reserved.  
Nokia Mobile Phones operates a policy of continuous improvement, and  
reserves the right to make changes and improvements to any products  
described in this guide without prior notice.  
Issue No. 2  
12/96  
63  
NOKIA One-Year Limited Warranty  
Nokia Mobile Phones, Inc. (“NMPI”) warrants that this cellular  
phone (“Product”) is free from defects in material and  
workmanship, according to the following terms and  
conditions:  
1.  
The limited warranty for the Product extends for ONE  
(1) year beginning on the date of purchase of the  
Product.  
2.  
The limited warranty extends only to the original  
consumer purchaser (“Consumer”) of the Product and  
is not assignable or transferable to any subsequent  
purchaser/end user.  
3.  
4.  
The limited warranty extends only to Consumers who  
purchase the Product in the United States.  
During the limited warranty period, NMPI will repair, or  
replace, at NMPI’s option, any defective parts, or any  
parts that will not properly operate for their intended  
use with new or factory rebuilt replacement items. No  
charge will be made to the Consumer for any such  
parts . NMPI will also pay for the labor charges  
incurred by NMPI in repairing or replacing the  
defective parts. The external housing and cosmetic  
parts shall be free of defects at the time of shipment  
and, therefore, shall not be covered under these  
limited warranty terms.  
5.  
6.  
Upon request from NMPI, the Consumer must provide  
information to reasonably prove the date of purchase.  
The Consumer shall bear the cost of shipping the  
Product to the Customer Service Department of NMPI.  
NMPI shall bear the cost of shipping the Product back  
to the Consumer after the completion of service under  
this limited warranty.  
7.  
a)  
The Consumer shall have no coverage or benefits  
under this limited warranty if any of the following  
conditions are applicable:  
The Product has been subject to abnormal use,  
abnormal conditions, improper storage, exposure to  
moisture or dampness, unauthorized modifications,  
unauthorized connections, unauthorized repair,  
misuse, neglect, abuse, accident, alteration, improper  
installation, or other acts which are not the fault of  
NMPI, including damage caused by shipping and  
blown fuses.  
64  
b)  
The Customer Service Department at NMPI was not  
notified by Consumer of the alleged defect or  
malfunction of the Product during the applicable  
limited warranty period.  
c)  
d)  
The Product serial number plate or the accessory date  
code has been removed, defaced, or altered.  
The defect or damage was caused by the defective  
function of the cellular system, or by inadequate signal  
reception by the external antenna.  
8.  
If a problem develops during the limited warranty  
period, the Consumer should take the following step-  
by-step procedure:  
a)  
b)  
The Consumer shall return the Product to the place of  
purchase for repair or replacement processing.  
If “a” is not convenient the Consumer may contact the  
Customer Service Department at NMPI, at the phone  
number listed on the next page for further instructions.  
c)  
d)  
e)  
The Consumer shall ship the Product prepaid and  
insured. Expenses related to removing the Product  
from an installation are not covered under this limited  
warranty.  
The Consumer will be billed for any parts or labor  
charges not covered by this limited warranty. The  
Consumer shall be responsible for expenses related to  
reinstallation of the Product.  
If the Product is returned to the Customer Service  
Department at NMPI during the limited warranty  
period, but the problem with the Product cannot be  
fixed under the terms and conditions of this limited  
warranty, the Consumer will be notified and given an  
estimate of the charges the Consumer must pay to  
have the Product repaired, with all shipping charges  
billed to the Consumer. If the estimate is refused, the  
Product will be returned freight collect. If the Product  
is returned to the Customer Service Department at  
NMPI after the expiration of the warranty period,  
NMPI’s normal service policies shall apply and the  
Consumer will be invoiced for all shipping charges.  
9.  
The Product consists of newly assembled equipment  
that may contain used components which have been  
reprocessed to allow machine compliance with  
Product performance and reliability specifications.  
65  
10.  
ANY IMPLIED WARRANTY OF MERCHANTABILITY,  
OR FITNESS FOR A PARTICULAR PURPOSE OF USE,  
SHALL BE LIMITED TO THE DURATION OF THE  
FOREGOING WRITTEN WARRANTY, OTHERWISE,  
THE FOREGOING WARRANTY IS THE PURCHASER’S  
SOLE AND EXCLUSIVE REMEDY AND IN LIEU OF  
ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.  
NMPI SHALL NOT BE LIABLE FOR INCIDENTAL OR  
CONSEQUENTIAL DAMAGES OR A LOSS OF  
ANTICIPATED BENEFITS OR PROFITS, RESULTING  
FROM THE PURCHASE OR USE OF THE PRODUCT  
OR ARISING FROM THE BREACH OF THE  
WARRANTY EVEN IF NMPI KNEW OF THE  
LIKELIHOOD OF SUCH DAMAGES.  
11.  
Some states do not allow limitation of how long an  
implied warranty lasts, so the above limitation may not  
apply to you (the Consumer). Some states do not allow  
the exclusion of incidental or consequential damages,  
so the above limitation or exclusions may not apply to  
you (the Consumer). This limited warranty gives you  
specific legal rights and you may also have other  
rights which vary from state to state.  
12.  
13.  
NMPI neither assumes nor authorizes any authorized  
service center or any person or entity to assume for it  
any other obligation or liability beyond that which is  
expressly provided for in this limited warranty.  
Questions concerning this limited warranty may be  
directed to the Customer Service Department at Nokia,  
6200 Courtney Campbell Causeway, Suite 900,  
Tampa, FL 33630. Telephone (813) 288-3800 or  
1-800-666-5553, Facsimile: (813) 287-6612.  
14.  
The limited warranty period for Nokia Product Corp.  
supplied attachments and accessories are specifically  
defined within their own warranty cards and  
packaging.  
66  

Motorola RAZR V3M User Manual
Melissa CM0801 User Manual
Lennox Hearth S1300 User Manual
KitchenAid KCM515 User Manual
JVC KS FX772R User Manual
Fujitsu MHW2040BS User Manual
Dell DX6012S User Manual
Blackberry Pearl8110Titanium User Manual
Black & Decker BCM1410BC User Manual
Billy Goat THE TERMITE TKD502SP User Manual