Nokia 2128i User Manual

USER GUIDE  
Nokia 2128i  
Nokia 2128i User Guide  
Issue 1  
931169X26  
1
LEGAL INFORMATION  
Part No.9240270, Issue No. 1a  
Copyright ©2006 Nokia. All rights reserved.  
Nokia, Nokia Connecting People, Nokia 2128i, Pop-Port, and the Nokia Original Enhancements  
logos are trademarks or registered trademarks of Nokia Corporation. Other company and product  
names mentioned herein may be trademarks or trade names of their respective owners.  
US Patent No. 5818437 and other pending patents. T9 text input software  
Copyright ©1999-2006. Tegic Communications, Inc. All rights reserved.  
Includes RSA BSAFE cryptographic or security protocol software from  
RSA Security.  
Java is a trademark of Sun Microsystems, Inc.  
The information contained in this user guide was written for the Nokia 2128i product. Nokia  
operates a policy of ongoing development. Nokia reserves the right to make changes to any  
of the products described in this document without prior notice.  
UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR  
INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES  
HOWSOEVER CAUSED.  
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED “AS IS.” EXCEPT AS REQUIRED BY  
APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING,  
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY AND RELIABILITY OR  
CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR  
WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.  
Export Controls  
This device may contain commodities, technology, or software subject to export laws and  
regulations from the U.S. and other countries. Diversion contrary to law is prohibited.  
FCC/Industry Canada Notice  
Your device may cause TV or radio interference (for example, when using a telephone in close  
proximity to receiving equipment). The FCC or Industry Canada can require you to stop using  
your telephone if such interference cannot be eliminated. If you require assistance, contact  
your local service facility. This device complies with part 15 of the FCC rules. Operation is  
subject to the condition that this device does not cause harmful interference.  
2
Table of Contents  
For your safety..................................................................................... 5  
Welcome............................................................................................... 8  
3. Text entry..................................................................................... 20  
4. Contacts list ................................................................................ 22  
6. Call log......................................................................................... 35  
7. Profiles......................................................................................... 37  
8. Settings........................................................................................ 38  
9. Gallery.......................................................................................... 53  
10. Games........................................................................................... 54  
11. Voice............................................................................................. 55  
12. Organizer...................................................................................... 58  
13. PC Connectivity........................................................................... 63  
14. Enhancements.............................................................................. 64  
15. Battery information .................................................................... 65  
Care and maintenance....................................................................... 68  
Additional safety information.......................................................... 69  
Index................................................................................................... 74  
3
Notes  
4
F o r y o u r s a f e t y  
For your safety  
Read these simple guidelines. Not following them may be dangerous or illegal.  
Read the complete user guide for further information.  
SWITCH ON SAFELY  
Do not switch the phone on when wireless phone use is prohibited or  
when it may cause interference or danger.  
ROAD SAFETY COMES FIRST  
Obey all local laws. Always keep your hands free to operate the vehicle  
while driving. Your first consideration while driving should be road safety.  
INTERFERENCE  
All wireless phones may be susceptible to interference, which could  
affect performance.  
SWITCH OFF IN HOSPITALS  
Follow any restrictions. Switch the phone off near medical equipment.  
SWITCH OFF IN AIRCRAFT  
Follow any restrictions. Wireless devices can cause interference  
in aircraft.  
SWITCH OFF WHEN REFUELING  
Do not use the phone at a refueling point. Do not use near fuel  
or chemicals.  
SWITCH OFF NEAR BLASTING  
Follow any restrictions. Do not use the phone where blasting is  
in progress.  
USE SENSIBLY  
Use only in the normal position as explained in the product  
documentation. Do not touch the antenna unnecessarily.  
QUALIFIED SERVICE  
Only qualified personnel may install or repair this product.  
ENHANCEMENTS AND BATTERIES  
Use only approved enhancements and batteries. Do not connect  
incompatible products.  
5
 
F o r y o u r s a f e t y  
WATER-RESISTANCE  
Your phone is not water-resistant. Keep it dry.  
BACKUP COPIES  
Remember to make back-up copies or keep a written record of all  
important information stored in your phone.  
CONNECTING TO OTHER DEVICES  
When connecting to any other device, read its user guide for detailed  
safety instructions. Do not connect incompatible products.  
EMERGENCY CALLS  
Ensure the phone is switched on and in service. Press the end key as  
many times as needed to clear the display and return to the start screen.  
Enter the emergency number, then press the send key. Give your  
location. Do not end the call until given permission to do so.  
About your device  
The wireless device described in this guide is approved for use on the CDMA 800  
and CDMA 1900 networks and also receives signals from the GPS location  
system. Contact your service provider for more information about networks.  
When using the features in this device, obey all laws and respect privacy and  
legitimate rights of others.  
Warning: To use any features in this device, other than the alarm clock,  
the device must be switched on. Do not switch the device on when  
wireless phone use may cause interference or danger.  
Network services  
To use the phone you must have service from a wireless service provider. Many of  
the features in this device depend on features in the wireless network to function.  
These network services may not be available on all networks or you may have to  
make specific arrangements with your service provider before you can utilize  
network services. Your service provider may need to give you additional instructions  
for their use and explain what charges will apply. Some networks may have  
limitations that affect how you can use network services. For instance, some  
networks may not support all language-dependent characters and services.  
Your service provider may have requested that certain features be disabled or not  
activated in your device. If so, they will not appear on your device menu. Your  
device may also have been specially configured. This configuration may include  
changes in menu names, menu order and icons. Contact your service provider for  
more information.  
6
 
F o r y o u r s a f e t y  
Shared memory  
The following features in this device may share memory: contacts, text messages,  
images, and tones in Gallery, calendar notes, games, and applications. Use of one  
or more of these features may reduce the memory available for the remaining  
features sharing memory. Your phone may display a message that the memory is  
full when you try to use a shared memory feature. In this case, delete some of the  
information or entries stored in the shared memory features before continuing.  
Some of the features, such as images, tones in Gallery, text messages, and  
applications may have a certain amount of memory specially allotted to them in  
addition to the memory shared with other features.  
7
 
W e l c o m e  
Welcome  
Congratulations on your purchase of the Nokia 2128i mobile device. Your device  
provides many functions that are practical for daily use, such as a hands-free  
loudspeaker, alarm clock, calculator, calendar. Your device can also connect to a  
PC, laptop, or other device, using a data cable. To personalize your device, you can  
set your favorite ring tones or wallpaper.  
Get help  
Find your phone label  
If you need help, Nokia Customer Care  
is available for assistance. Before  
calling, we recommend that you write  
down the following information and  
have it available:  
Electronic serial number (ESN)  
Your zip code  
The ESN is found on the type label,  
which is located beneath the battery  
on the back of the device.  
See "Remove the back cover," p. 15 and "Remove the battery," p. 15.  
8
     
W e l c o m e  
Contact Nokia  
Please have your product with you when contacting either of the numbers below:  
Nokia Customer Care Center, USA  
Nokia Inc.  
4630 Woodland Corporate Blvd.  
Suite #160  
Tampa, Florida 33614  
Tel: 1-888-NOKIA-2U  
(1-888-665-4228)  
Fax: 1-813-249-9619  
In Canada call:  
Tel:1-888-22-NOKIA  
(1-888-226-6542)  
Web site: www.nokia.ca  
For TTY/TDD users only:  
1-800-24-NOKIA (1-800-246-6542)  
Updates  
Check www.nokiausa.com/support or your local Nokia Web site for the latest  
version of this guide, additional information, downloads, and services related to  
your Nokia product.  
On the Web site, you can get information on the use of Nokia products and  
services. If you need to contact customer service, check the list of local Nokia  
Care contact centers at www.nokiausa.com/support.  
For maintenance services, check your nearest Nokia Care services location at  
Accessibility solutions  
Nokia is committed to making mobile phones easy to use for all individuals,  
including those with disabilities. For more information visit the web site at  
9
 
P h o n e a t  
a
g l a n c e  
1. Phone at a glance  
Power key and  
flashlight (1)  
Earpiece (2)  
Right selection key (3)  
End key (4)  
Keypad (5)  
Connection port (6)  
Microphone (7)  
Charger port (8)  
Scroll up and  
down key (9)  
Send key (10)  
Left selection key (11)  
Display screen (12)  
10  
 
P h o n e a t  
a
g l a n c e  
The start screen  
Depending on your wireless service provider and the model number of your device,  
some or all of the following selection keys may appear on the start screen.  
The start screen is home base and indicates that your device is in the standby mode.  
Signal strength (1)—A higher bar indicates a stronger network signal.  
Battery level (2)—A higher bar indicates more charge in the battery.  
Menu (3)—Press the left selection key to select this option.  
Contacts (4)—Press the right selection key to select this option.  
Quick keys  
In the standby mode, scroll down to access the contacts list, and select a contact.  
Press the send key to call the primary number of the contact.  
Press the scroll up key to activate the flashlight momentarily. Press the scroll up  
key twice to switch the flashlight on continuously. Press the scroll up key again  
to switch off the flashlight.  
Indicators and icons  
Depending on your wireless service provider and the model number of your phone,  
some or all of the following indicators and icons may appear in the standby mode:  
You have new text or picture messages. See "Text messages," p. 28.  
You have new voice messages. See "Automate voice mail," p. 33.  
Device keypad is locked. See "Keyguard," p. 19.  
Device is set to the silent profile. See "Profiles," p. 37.  
Alarm clock is set to on. See "Alarm clock," p. 58.  
Countdown timer is running. See "Countdown timer," p. 61.  
Stopwatch timer running in the background. See "Stopwatch," p. 62.  
Integrated hands-free is active. See "Use the loudspeaker," p. 18.  
11  
       
P h o n e a t  
a
g l a n c e  
Timed profile is selected. See "Profiles," p. 37.  
,
,
or  
An enhancement is connected to the device.  
See "Enhancements," p. 64.  
Voice privacy encryption is active in the network.  
See "Security settings," 48.  
or  
Location info sharing is set to 911 only or Location on.  
See "Location information sharing," p. 38.  
You are roaming outside your home network. See "Roaming options," p. 50.  
You are in a 1XRTT network. See "Network services," p. 6.  
You are in a digital network. See "Network services," p. 6.  
or  
Off hook, call or data call in progress.  
Phone menus  
Phone features are grouped according to function and are accessed through the  
main menus. Each main menu contains submenus and lists from which you can  
select or view items and customize your phone features. To access these menus  
and submenus use the scroll method or use a shortcut.  
Some features may not be available, depending on your network. For more  
information, contact your wireless provider.  
The scroll method  
1. In the standby mode, select Menu, and scroll up or down  
through the main menus.  
As you scroll through the menus, the menu number appears  
in the upper right corner of the display. Below the number  
is a scroll bar with a tab that moves up or down on the right  
side of the display screen as you scroll through the menus. This display provides  
a visual representation of your current position in the menu structure.  
2. When you arrive at a menu, press the left selection key to enter submenus.  
Select Back (the right selection key) to return to the previous menu.  
Select the end key from any submenu or select Exit from the main menu  
level to return to the standby mode.  
12  
 
P h o n e a t  
a
g l a n c e  
Shortcuts  
To go directly to almost any menu or submenu, as well as activate most features  
use a shortcut.  
In the standby mode, select Menu; then within 3 seconds, press the key or keys  
associated with the menu function you would like to view or activate.  
For example, to select the meeting profile, select Menu 3-3-1 from standby mode  
(Menu > 3 Profiles > 3 Meeting > 1 Activate). After a brief pause, the Meeting  
profile is activated.  
In-phone help  
Many features have brief descriptions (help text) that can be viewed on the display.  
In order to view the descriptions, you must first activate help text.  
In the standby mode, select Menu > Settings > Phone settings > Help text  
activation > On or Off.  
To view these descriptions, scroll to a feature, and wait for about 15 seconds.  
Select More, when necessary, to view all of the description, or select Back to exit.  
Security feature  
The security feature protects your device from unauthorized outgoing calls or  
access to the stored information with the lock and security codes. The lock code  
is a four-digit number while the security code is a five-digit number. By default,  
the security feature uses the lock code (defaulted to the last four digits of your  
phone number) instead of the security code to protect your phone.  
Enter the lock code to access the following security option:  
1. In the standby mode, select Menu > Settings > Security settings.  
2. Enter the lock code, and select OK. See "Security settings," p. 48.  
Note: Depending on your wireless service provider, the preset lock code may be  
1234 or 0000 instead of the last four digits of your phone number. If these codes  
do not work, contact your wireless service provider for help.  
Your device, by default, requires you to enter the lock code to restore factory settings:  
1. In the standby mode, select Menu > Settings > Restore factory settings.  
2. Enter the lock code, and select OK. See "Security settings," p. 48.  
Note: Depending on your wireless service provider, your device may ask you for  
the security code (defaulted to 12345) instead of the lock code.  
13  
       
S e t u p y o u r p h o n e  
2. Set up your phone  
Antenna  
Your phone has an internal antenna that is located  
toward the top of the phone.  
In the Nokia 2128i phone, the GPS antenna is  
internal and is activated when you place emergency  
calls or when Location on is selected from the  
Location info sharing menu. See "Location  
information sharing," p. 38.  
Hold the phone as you would any other  
telephone with the antenna area pointed  
up and over your shoulder.  
Note: As with any other radio transmitting  
device, do not touch the antenna  
unnecessarily when the device is switched  
on. Contact with the antenna affects call  
quality and may cause the device to operate  
at a higher power level than otherwise  
needed. Avoiding contact with the antenna  
while operating the device optimizes the  
antenna performance and the battery life.  
Change the battery  
Always switch the device off, and disconnect the charger before removing  
the battery.  
Warning: Use only batteries, chargers, and enhancements approved by  
Nokia for use with this particular model. The use of any other types may  
invalidate any approval or warranty, and may be dangerous.  
Check the model number of any charger before use with this device. This device is  
intended for use when supplied with power from the chargers.  
14  
   
S e t u p y o u r p h o n e  
For availability of approved enhancements, please check with your dealer. When  
you disconnect the power cord of any enhancement, grasp and pull the plug, not  
the cord.  
Note: Always switch off the power and disconnect the charger and any  
other device before removing the cover. Avoid touching electronic  
components while changing the cover. Always store and use the device  
with the cover attached.  
Remove the back cover  
1. With the back of the phone facing  
you, push down on the back cover  
release button.  
2. Slide the back cover toward the  
bottom of the phone and remove.  
Remove the battery  
After you have removed the back cover,  
insert your finger into the finger grip,  
and lift the battery from its compartment.  
Replace the battery  
1. Position the battery so the positive  
and negative indicators on the  
battery match up with the positive  
and negative indicators on the phone.  
The battery label should face away  
from the phone.  
2. Insert the battery, gold-colored contact  
end first, into the battery slot.  
3. Push down on the other end of the battery to snap it into place.  
15  
     
S e t u p y o u r p h o n e  
Replace the back cover  
Slide the back cover toward the top of  
the phone until the back cover is  
securely in place.  
Charge the battery  
1. Plug the charger into a standard  
ac outlet.  
2. Insert the charger output plug  
into the round jack at the bottom  
end of the phone.  
After a few seconds, the battery  
indicator on the display starts to  
scroll from bottom to top. If the  
battery is completely discharged, it  
may take a few minutes before the  
charging indicator appears on the  
display or before any calls can be made.  
Turn your phone on or off  
1. To turn your phone on or off, press and  
hold the power key on top of the phone  
for at least 3 seconds.  
2. Enter the lock code. if necessary, and select OK.  
See "Security settings," p. 48.  
Connect the headset  
A compatible headset may be purchased with your  
phone or separately as an enhancement. See "Enhancements," p. 64.  
Important: The headset may affect your ability to hear sounds around  
you. Do not use this headset in situations that may endanger your safety.  
Warning:When using the headset, your ability to hear outside sounds may  
be affected. Do not use the headset where it can endanger your safety.  
16  
       
S e t u p y o u r p h o n e  
1. Plug the connector of the included  
headset adapter into the Pop-Port™  
connector at the bottom end of your  
device.  
appears in the standby mode.  
2. Plug the connector of the headset into  
the jack on the adapter.  
3. Position the headset on your ear.  
With the headset connected, make,  
answer, and end calls as usual.  
Use the keypad to enter numbers.  
Press the send key to place a call.  
Press the end key to end a call.  
Make a call  
Use the keypad  
1. Enter the phone number (including the area code), and press the send key. To  
delete a character to the left of the cursor, select Clear.  
2. Press the end key to end the call, or select End call to cancel the call attempt.  
Use the contacts list  
1. In the standby mode, scroll down to the entry you wish to view.  
2. Press the send key to make the call, or select Details to view details of the entry.  
Use the last dialed number  
1. In the standby mode, press the send key to display the last 20 numbers dialed.  
2. Scroll to the number (or name) you wish to redial, and press the send key.  
Conference calls  
Conference calling is a network service that allows you to take part in a  
conference call with two other participants.  
1. Make a call to the first participant.  
2. With the first participant on the line, select Options > New call.  
3. Enter the phone number of the second participant, or select Search to  
retrieve a number from the contacts list.  
17  
   
S e t u p y o u r p h o n e  
4. Select Flash and the first participant is put on hold.  
5. When the second participant answers, press the send key to connect the calls.  
6. To end the conference call, press the end key.  
Answer calls  
Answer, silence, or decline an incoming call  
Silence and Decline are carrier dependent features.  
1. Press the call or Answer key to answer the call.  
2. To mute the ringing tone, select Silence. If you do not answer the call, the call  
is forwarded to voicemail.  
3. To dismiss and forward the call to voicemail (a carrier dependent feature), select  
Decline after you have muted the ringing tone, or press the end key at any time.  
Answer a call with the keypad locked  
To answer a call with the keypad locked, press the send key. During the call, all  
features function normally. When you end, silence or decline the call, the keypad  
automatically relocks. See "Keyguard," p. 19.  
When the keyguard is on, calls still may be possible to the official emergency  
number programed into your device.  
Adjust the earpiece volume  
While in a call, scroll up or down to adjust the volume of the earpiece.  
When you adjust the volume, a bar chart appears in the display to indicate the  
volume level.  
Use the loudspeaker  
You can use your device as a loudspeaker during a call.  
To activate the loudspeaker, select Loudsp.  
To deactivate the loudspeaker during a call, select Handset.  
The loudspeaker is deactivated automatically when a call (or a call attempt) ends,  
or when certain enhancements are connected.  
Warning: Do not hold the device near your ear when the loudspeaker is  
in use, because the volume may be extremely loud.  
18  
     
S e t u p y o u r p h o n e  
Options during a call  
Many of the options used during a call are network services. Check with your  
wireless service provider for more information.  
1. Select Options to display the following:  
Mute or Unmute—Silence your end of the call.  
Loudspeaker or Handset—Activate or deactivate the loudspeaker while in a call.  
New call—Initiate a conference call. See "Conference calls," p. 17.  
Add to contact—Save the number you entered during a call to a contact that  
is already in the contacts list.  
End all calls—Disconnect from all active calls.  
Touch tones—Enter the numbers, and select Tones to send the numbers as tones.  
Contacts—View the contacts list.  
Menu—View the phone menu.  
2. Scroll to and select an option to activate the option or enter its submenu.  
Keyguard  
Use keyguard, to lock the keypad and prevent keys from being pressed accidentally.  
Remember to lock your device keypad to prevent accidental calls. If the keypad  
is locked, it unlocks when you receive a call. After the call, the lock  
automatically reactivates.  
When the keyguard is on, calls still may be possible to the official emergency  
number programed into your device. Enter the emergency number and press the  
send key. See "Automatic keyguard," p. 41.  
Lock the keypad  
Select Menu; then press * within 2 seconds.  
Unlock the keypad  
Select Unlock; then press * within 2 seconds.  
19  
   
T e x t e n t r y  
3. Text entry  
You can use two methods for entering text and numbers: standard mode and  
predictive text mode.  
Select Clear to backspace the cursor and delete a character.  
Select and hold Clear to backspace continuously and delete characters.  
Standard mode  
Standard mode is the only way to enter text into the contacts list and to rename  
caller groups.  
Text (Abc)  
Press a key once to insert the first letter on the key and twice for the second  
letter, etc. If you pause briefly, the last letter in the display is accepted and your  
device awaits the next entry.  
Press 0 to enter a space and accept a completed word.  
Press 1 to insert a period into your message.  
Press and hold * to display a complete list of special characters.  
Press and hold # to switch between letters and numbers.  
Numbers (123)  
To switch from Abc mode to 123 mode, press and hold # at any message entry screen.  
Punctuation and special characters  
While at any text entry screen, press * to display special characters (press and hold *  
if predictive text is on). Press * again to cycle through all available characters. To  
navigate through the list of special characters, use the scroll keys. Once a character  
is highlighted, select Insert to insert the character into your message.  
Predictive text mode  
To write messages quickly, use predictive text mode with your keypad and the  
built-in dictionary. Predictive text mode is much faster than the standard mode  
method because you do not need to scroll through the letters on each key to spell a  
word. The dictionary determines which word to enter based on the keys selected.  
20  
     
T e x t e n t r y  
Activate or deactivate  
At any text entry screen, select Options > Predictive text > English, Français,  
or Español to activate predictive text; or select Prediction off to deactivate  
predictive text.  
Text entry  
The illustration below simulates your display each time a key is pressed. For example,  
to write ’Nokia’ with predictive text on and the English dictionary selected, press  
each of the following keys:  
6
6
5
4
2
Press 0 to enter a space, and begin writing the next word.  
If a displayed word is not correct, press * to see other matches. To return to  
the previous word in the list of matches, select Previous.  
If ? appears after a word, select Spell to enter the word with the standard  
mode, and add the word to the dictionary.  
Press 1 to insert a period into your message.  
Press and hold * to display special characters. Press * again to cycle through  
all available characters.  
Change case and mode  
Press # to switch between uppercase, lowercase, and sentence case text; and  
between standard and predictive text mode. Case and mode are indicated by the  
icons that appear in the upper left of the display screen, as follows:  
Uppercase text: standard mode is on.  
Lowercase text: standard mode is on.  
Sentence case text: standard mode is on.  
This option is available only at the beginning of a sentence.  
Uppercase text: predictive text is on.  
Lowercase text: predictive text is on.  
Sentence case text: predictive text is on.  
This option is available only at the beginning of a sentence.  
21  
C o n t a c t s l i s t  
4. Contacts list  
The contacts list can hold up to 250 contacts with multiple numbers and text notes  
for each contact. The amount of numbers and text entries that you can save may  
vary, depending on length and the total number of entries in the contacts list.  
Search  
In the standby mode, select Contacts > Search; highlight the contact you wish to  
view, and select Details.  
Add new contacts  
Save a name and number  
1. In the standby mode, enter the phone number you wish to save.  
2. Select Options > Save.  
3. Enter the contact name, and select OK.  
Save (only) a number  
In the standby mode, enter the phone number you wish to save; select and  
hold Options.  
Save multiple numbers and text items  
The first number you save for any entry is automatically set as the default.  
The default setting can be changed later. To save different types of phone  
numbers and short text items per name to the device memory, do the following:  
1. In the standby mode, scroll down to display a list of entries. Scroll to the entry  
to which to add a phone number or text item.  
2. Select Details > Options > Add number or Add detail.  
3. Enter the number or text for the type you have selected, and select OK.  
4. To change the type, select Change type in the options list.  
To change which phone number is the default number for the contact entry:  
1. In the standby mode, scroll down to the entry you wish to change,  
and select Details.  
2. Scroll to the number you wish to set as default, select Options > As primary no.  
22  
   
C o n t a c t s l i s t  
Set up voice tags  
For more information on setting up voice tags and other voice features, see  
"Voice tags," p. 56.  
Caller groups  
You can add contact list entries to any of five caller groups, and assign a unique  
ringing tone or graphic to that group. This enables you to identify callers from the  
group by their unique ringing tone or graphic.  
Set up a caller group  
1. In the standby mode, scroll down to display a list of entries in your contacts list.  
2. Scroll to a name to add to a caller group, and select Details.  
3. Select Options > Caller groups.  
4. Scroll to and select the caller group to add the name.  
Options  
1. In the standby mode, select Contacts > Caller groups > Family, VIP, Friends,  
Business, and Other.  
2. Select from following caller group options:  
Rename group—Rename the group to your preference.  
Group ringing tone—Set the ringing tone for the group.  
Group logo—Turn the graphic for the caller group on or off or view the graphic.  
Group members—Add or remove members from the caller group.  
Set up 1-touch dialing  
You can associate any entry in the contacts list with a key from 2–9; then dial  
those entries by pressing and holding the assigned key. See "1-touch dialing," p. 39  
to activate or deactivate 1-touch dialing.  
Assign a key to 1-touch dialing  
1. In the standby mode, select Contacts > 1-touch dialing.  
If 1-touch dialing is off, the device displays a prompt asking if you would like  
to turn 1-touch dialing on. Select Yes to activate 1-touch dialing  
2. Scroll to an (empty) 1-touch dialing slot, and select Assign.  
3. Enter the number (including the area code) and a name for the contact, or  
select Search to retrieve a number from the contacts list.  
4. Select OK.  
23  
   
C o n t a c t s l i s t  
Change 1-touch dialing numbers  
1. In the standby mode, select Contacts > 1-touch dialing.  
2. Scroll to the 1-touch dialing entry you wish to change, and select  
Options > Change.  
3. Enter the new number; or search to retrieve a number from the contacts list,  
and select OK.  
4. Enter a name for the entry, and select OK.  
Delete 1-touch dialing numbers  
1. In the standby mode, select Contacts > 1-touch dialing.  
2. Scroll to the 1-touch dialing location you wish to delete, and select Options >  
Delete > OK.  
Edit contacts list entries  
1. In the standby mode, scroll down to display your contacts list.  
2. Scroll to the entry to edit; select Details and one of the following options:  
Add voice tag or Voice tag—Add a new voice tag or Playback, Change, or Delete  
an existing voice tag.  
Edit number—Edit an existing contact number.  
Delete number—Delete a phone number from the contact.  
Use number—Display the phone number in the standby mode, ready to be called.  
View—View the details of the contact.  
Change type—Change the number type to General, Mobile, Home, Work, or Fax.  
As primary no.—Change the default number of the contact.  
Add number—Add a number to the contact.  
Add detail > E-mail, Web address, Street addr., or Note—Add an address or note  
to the contact.  
Caller groups—Add the contact to an existing caller group.  
Custom tone—Add a custom ringing tone to the contact.  
Send bus. card—Send the contact as a business card to another phone.  
Send message—Create and send a message to the contact.  
1-touch dialing—Add the contact to your speed dial list.  
Edit name—Edit the name of the contact.  
View name—View the name of the contact.  
Delete—Delete the entire contact entry from your contacts list.  
24  
 
C o n t a c t s l i s t  
Edit phone number  
Highlight the existing phone number you would like to edit, and select Options >  
Edit number.  
E-mail address entry  
Highlight the existing e-mail address entry to send or update, and select Options  
and one of the following:  
Send e-mail—Send an e-mail.  
Edit detail—Edit e-mail details.  
Delete detail—Delete e-mail.  
View—View the details of the e-mail contact.  
Change type—Change the e-mail type to E-mail, Web address, Street addr., or Note.  
Add detail—Add an E-mail, Web address, Street addr., or Note to the entry.  
Add number—Add a number to the entry.  
Caller groups—Add the e-mail to an existing caller group.  
Custom tone—Add a custom ringing tone to the contact.  
Send bus. card—Send the contact a business card.  
Edit name—Edit the name of the contact.  
View name—View the name of the contact.  
Delete—Delete the entire e-mail entry from your contacts list.  
Edit web address  
1. Highlight the web address entry to edit, and select Options.  
2. Select Web address, Street addr., or Note > OK.  
Delete contacts list entries  
In the standby mode, select Contacts > Delete.  
To delete individual entries, select One by one, and scroll to the entry you wish  
to delete. Select Delete > OK to confirm.  
To delete the entire contents of your contacts list, select Delete all > OK.  
Select OK to confirm or Back to return to Contacts. If OK, enter the security  
code, and select OK. See "Security settings," p. 48.  
25  
 
C o n t a c t s l i s t  
View the contacts list  
1. In the standby mode, select Contacts and one of the following options:  
Search—Find a name or select from a list.  
Add new—Add a contact to your contacts list.  
Edit name—Edit an existing name.  
Delete—Delete a name and its associated numbers.  
Add number—Add a number to an existing name.  
Settings—Change the contacts list view, check the memory status of your device.  
1-touch dialing—View or modify the list of 1-touch dialing numbers.  
Voice tags—Attach, listen to, or modify a contact voice tag.  
My number—View your own phone number.  
Caller groups—View and edit the properties for any of the caller groups:  
Family, VIP, Friends, Business, or Other.  
2. Scroll to and select an item to activate the feature or enter its submenu.  
Fast search for a name  
1. In the standby mode, scroll down to display the contents of your contacts list.  
2. Press the key that corresponds to the first letter of the name for which you  
are performing a search.  
3. Scroll up and down to highlight a contact, and select Details to view the details.  
Configure settings  
You can choose how the contacts appear in your contacts list and view the amount  
of memory used or available in your device.  
For more information on used and available memory, see "Shared memory," p. 7.  
In the standby mode, select Contacts > Settings, and one of the following options:  
Scrolling view—Choose how names and numbers stored in the contacts list are  
viewed. Select Name list or Name and no.  
Memory status—View the amount of memory used in the contacts list.  
Send and receive contacts  
To send and receive an entry in your contacts list, use text messaging,  
if supported by your wireless provider.  
26  
   
C o n t a c t s l i s t  
Send a business card  
To send a business card as a text message to a compatible phone or other handheld  
device, do the following:  
1. Highlight the entry from the contacts list and select Details > Options > Send  
bus. card > Via text msg., and one of the following:  
Select Primary no. or All details, if the entry has more than one  
number or detail.  
Enter the number for your recipient.  
Select Search to retrieve a number from your contacts list.  
2. Select OK, to send the business card.  
27  
M e s s a g e s  
5. Messages  
If you have subscribed to a messaging service through your wireless provider, you  
can send and receive text messages to compatible phones that also subscribe to a  
compatible message service. You may also be able to send and receive picture  
messages and e-mail messages.  
Your device supports the sending of text messages beyond the 160 character  
limit for a single message. Longer messages will be sent as a series of two or more  
messages. Your service provider may charge accordingly. Characters that use accents  
or other marks, and characters from some language options like Chinese, take up  
more space, limiting the number of characters that can be sent in a single message.  
The number of characters remaining in a message are indicated by counter in  
upper right corner of screen. If there are special characters in your message, the  
indicator may not show the message length correctly.  
Note: When sending messages, your device may display Message sent.  
This is an indication that the message has been sent by your device to the  
message center number programed into your device. This is not an indication  
that the message has been received at the intended destination. For  
more details about messaging services, check with your service provider.  
Text messages  
Write and send  
1. In the standby mode, select Menu > Messages > Text messages > Create  
message, and one of the following:  
Text (select to send an alphanumeric text message) > Add number,  
Add e-mail, Edit message, List recipients, or Send.  
Numeric page (select to send a numeric message) > Add number,  
Callback no., List recipients, or Send.  
2. Select Add number or Add e-mail to enter the recipient’s phone number or e-mail  
address; or select Search to retrieve a number from your contacts list. Select OK.  
3. Repeat step 2 to add more recipients, and select OK.  
4. Select Options > Edit message.  
5. Compose a message and select Options > Send.  
28  
     
M e s s a g e s  
Messaging options  
When you create or reply to a text message, depending on the mode of text input  
you use and the features supported by your wireless service provider, some or all  
of the following options are available:  
Send—Send the message to recipient.  
List recipients—Send the message to more than one recipient; or delete or edit  
the recipient list.  
Settings—Select Urgent, Delivery note, or Callback no., and press Mark to add the  
selection to the message.  
Save message—Save the message to a folder. Select Sent items, Templates, or Archive.  
Clear text—Erase the text clipboard.  
Exit editor—Save the message to your Sent items folder automatically, and exit  
the message editor.  
Insert contact—Insert a name from your contacts list into your message.  
Insert number—Insert a phone number or find a phone number in the contacts  
list, to insert into your message.  
Use template—Insert a predefined template into your message.  
Add-ins—Insert a Sound, Animation, or Picture to the text message.  
Note: A picture message cannot be sent to an e-mail address.  
Styles—Select Font type > Bold, Italic, Underline, Strikethr. and press Mark to add  
the selection to the message.  
Insert word or Edit word—Enter or edit the text of a new word that might not appear  
in the predictive text dictionary. This displays only when the Predictive text is on.  
Insert symbol—Insert a special character into your message. This displays only  
when the Predictive text is on.  
Predictive text—Choose a predictive text language, and turn the dictionary on or off.  
Matches—View matches found in the dictionary for the word you want to use.  
This displays only when the Predictive text is on and you have entered some text.  
Distribution list  
The distribution list allows you to send messages to a group of contacts. In the  
standby mode, select Menu > Messages > Text messages > Distribution lists.  
To create a distribution list, select Options > Add list. To populate your list, select  
Add contact and a contact from your contacts list.  
To view, rename or modify a distribution list, highlight the distribution list, and  
select Options > View list, Rename list, Clear list, or Delete list.  
29  
 
M e s s a g e s  
Templates  
Templates are short, prewritten messages that can be recalled and inserted into  
new text messages.  
1. Open the blank message creation screen. See "Write and send," p. 28.  
2. Select Options > Use template.  
3. Scroll to and select one of the available templates.  
4. Enter the text into your new message, and select Options > Send.  
Read messages  
Important: Exercise caution when opening messages. Messages may  
contain malicious software or otherwise be harmful to your device or PC.  
When you receive a text message, a notification message and  
in the upper left corner in the standby mode. When you have unopened messages  
in your Inbox, is displayed.  
are displayed  
1. Select Show to read the message or Exit to remove the notification icon.  
Scroll to view the whole message, if necessary.  
2. Select Options > Reply.  
3. Select Empty screen, and compose your reply.  
4. To send your reply, select Options > Send.  
Options  
When you read a text message, some or all of the following options are available,  
depending on the text input mode and the features supported by your wireless  
service provider:  
Delete—Discard the message.  
Reply—Reply to the message. Create the message, and select Options >Send.  
Use number—Choose Save, Add to contact, Send message, or Call.  
Save—Save the message to a folder.  
Use web link—Activate web link (appears when message contains a URL).  
Save address—Save e-mail address (appears when the message contains an  
e-mail address).  
List objects—Display a selection list that includes sounds, pictures, animations,  
vCard, and vCalendar objects embedded in message.  
Forward—Forward the message to another phone number.  
Rename—Edit the title of the message.  
30  
M e s s a g e s  
Message folders  
Save messages  
To save drafts of messages or received messages to a folder, do the following:  
1. Open the message or create a new message, and select Options.  
2. Select Save or Save message > Sent items, Templates, Archive, or a folder  
you created.  
View saved messages  
1. In the standby mode, select Menu > Messages > Text messages.  
2. Select the folder containing the message you wish to view:  
Inbox—Stores read and unread messages.  
Sent items—Stores messages sent automatically from your phone.  
Archive—Stores messages you have saved.  
Templates—Stores pictures and prewritten templates.  
My folders—Provides a place to organize your messages in custom folders.  
Select Options > Add folder or Options > Rename folder or Delete folder to  
change a folder.  
3. Once the folder opens, scroll to and select the message to view.  
Delete messages  
If your message memory is full, Message overwriting is set to off and you have  
more messages waiting at the network, when No space for new messages appears  
in the standby mode:  
Read some of the messages, and delete them.  
Delete messages from your folders.  
Delete a single message  
1. In the standby mode, select Menu > Messages > Text messages.  
2. Scroll to and select the message to delete.  
3. Select Options > Delete > OK. Select Back to exit  
Delete all messages in a folder  
1. In the standby mode, select Menu > Messages > Text messages >  
Delete messages.  
31  
     
M e s s a g e s  
2. Scroll to the folder containing the messages to delete, and Select one of the  
following options:  
All—Deletes all messages in all folders  
All read—Deletes any messages which have been read in all folders  
All unread—Deletes any messages which have not been read in all folders  
Inbox—Deletes all messages from the Inbox folder  
Sent items—Deletes all messages from the Sent items folder  
Archive—Deletes all messages from the Archive folder and all user created folders  
User defined folders—Displays all user defined folders that the user added  
under My folders after the predefined folders.  
3. Select OK to empty the folder.  
Delete folders  
Only folders created in My folders can be deleted. The Inbox, Sent items, Archive,  
and Templates folders are protected. When a folder is deleted, all messages in the  
folder are also deleted.  
Message settings  
Change sending options  
Note: Some or all of the following Sending options may be available as  
determined by your carrier.  
In the standby mode, select Menu > Messages > Text messages > Message  
settings > Sending options, and select the setting you wish to change.  
Priority—Sets the priority of the note to Normal or Urgent.  
Delivery note—Receives a note confirming delivery of the message.  
Select On or Off.  
Send callback number—Sends a callback number to the recipient.  
Select Off or enter your phone number.  
Change message settings  
In the standby mode, select Menu > Messages > Text messages > Message  
settings > Other settings, and one of the following options:  
Message overwriting—Select Sent items only, Inbox only, S. items & inbox, or Off.  
Save to Sent items as sending—Select Always save, Always prompt, or Off.  
32  
M e s s a g e s  
Auto-playback of sounds—Automatically plays back any attached sounds in  
the message.  
When the message memory is full, your phone cannot send or receive any new  
messages. However, you can set your phone to automatically overwrite selected  
messages in the Inbox or Sent items folders when new messages arrive.  
Add-ins  
Select Menu > Messages > Text messages > Add-ins >Sounds, Animations, or  
Pictures, to send animation, pictures or sounds in your text messages.  
Connect to voice mail  
Press and hold 1. The device connects to the stored voice-mail number. When you  
connect to voice mail and the prerecorded greeting begins, follow the service’s  
automated instructions to set up or use your voice mail.  
If no voice-mail number is stored, contact your service provider for the  
correct number.  
Automate voice mail  
Special characters, called dialing codes, can be added to phone numbers. Dialing  
codes instruct the receiving system to pause, wait, bypass, or accept the numbers  
that follow them in the dialing string. See "Insert dialing codes," p. 34.  
Voice mail services vary by service provider. The following instructions are examples  
of common operations. Please check with your service provider for specific  
instructions for using your voice mail service.  
Set up voice mail with dialing codes  
1. Write down your voice mailbox number.  
2. Call and check your voice mail as you normally would.  
3. Write down your interaction with the recorded prompts step-by-step. Keep in  
mind that each voice mail service may vary. However, it should be similar to  
the following:  
Dial *86, pause 5 seconds, enter password (such as, 1234), press #.  
4. In the standby mode, select Contacts > 1-touch dialing.  
5. Scroll to an (empty) 1-touch dialing slot and select Assign.  
6. Enter your voice mailbox number, including the area code.  
33  
     
M e s s a g e s  
7. Enter any dialing codes as necessary using the information that you wrote  
down from "Insert dialing codes," p. 34.  
If you pause for 5 seconds after connecting to voice mail, enter p twice after  
the voice mailbox number; for example, 2145551212pp.  
8. Enter any remaining pauses or other information that allows you to listen to  
your messages, and select OK.  
9. Enter a name (such as voice mail), and select OK.  
To dial and listen to your voice mail, in the standby mode, press and hold the  
assigned 1-touch dialing key.  
Insert dialing codes  
Press * repeatedly to cycle through the dialing codes. Once the desired code  
appears in the display, pause briefly. The code is inserted into the dialing string.  
The following dialing codes are available:  
* — Bypasses a set of instructions  
+ — International prefix  
p — Pauses for 2.5 seconds before sending the numbers that follow  
w — Waits for you to press the send key before sending the numbers or codes  
that follow  
34  
 
C a l l l o g  
6. Call log  
Call log stores information about the last 20 missed, 20 received, and 20 dialed  
calls. It also stores the duration of all calls. When the number of calls exceeds the  
maximum, the most recent call replaces the oldest.  
To view information for Missed calls, Received calls, or Dialed numbers, choose  
from the following options:  
Call time—Displays the date and time of the call  
Send message—Sends a message to the number  
View number—Displays the number  
Use number—Edits the number and associates a name with the number  
Save—Enters a name for the number and saves it to your contacts list  
Add to contact—Adds the number to an existing entry in your contacts list, if the  
number is not associated with a name  
Delete—Clears the number from memory  
Call—Calls the number  
View missed calls  
Missed calls were never answered. The missed calls feature does not function  
when your phone is switched off.  
If the message icon appears in the display, select List and highlight the missed call.  
Select Options.  
Or, from the standby mode, select Menu > Call log > Missed calls . Highlight a  
missed call and select Options.  
View received calls  
Received calls have been answered. In the standby mode, select Menu > Call log >  
Received calls. Highlight a received call and select Options.  
View dialed numbers  
Dialed numbers were dialed previously from your phone. In the standby mode,  
press the send key, or select Menu > Call log > Dialed numbers. Highlight a name  
or number and select Options.  
35  
       
C a l l l o g  
Call times  
To view up to five calls with the time each call occurred, your phone clock must  
be set.  
1. Select Options > Call time.  
2. Scroll through the calls to view the recent call times.  
3. Select Back to return to the options list.  
Delete call logs  
To delete any missed, dialed, or received calls from phone memory, in the standby  
mode, select Menu > Call log > Delete recent call lists and select the call type to  
clear: All, Missed, Received or Dialed.  
View duration of calls  
Note: The actual invoice for calls and services from your service provider  
may vary depending on network features, rounding off for billing, taxes,  
and so forth.  
To activate the call timer, in the standby mode and while in a call, select Details >  
Show call time on display > On or Off.  
Note: Some timers, including the life timer, may be reset during service  
or software upgrades.  
To determine the duration of your calls, select Menu > Call log > Call timers, and  
Duration of last call, Duration of dialed calls (Home or Roaming), Duration of  
received calls (Home or Roaming), Duration of all calls, Life timer, Clear timers  
Clear timers sets all call timers, except the life timer, to zero. Enter your security  
code, and OK. See "Security settings," p. 48.  
36  
   
P r o f i l e s  
7. Profiles  
Profiles define how your phone reacts when you receive a call or message, how your  
keypad sounds when you press a key, and more. Ringing options, keypad tones, and  
other settings for each profile can be left at their default setting, or customized.  
The following profiles are available: Normal, Silent, Meeting, Outdoor, and Pager.  
Profiles are also available for enhancements such as a headset and car kit. See  
"Enhancement settings," p. 46, for more information about enhancement profiles.  
Activate  
In the standby mode, select Menu > Profiles > select the profile of your  
choice > Activate.  
Customize a profile  
You can customize the profiles in a variety of ways.  
You cannot rename the Normal profile.  
1. In the standby mode, select Menu > Profiles.  
2. Highlight the profile you wish to customize and select Customize.  
3. Select the option you want to customize: Incoming call alert, Ringing tone,  
Ringing volume, Vibrating alert, Message alert tone, Keypad tones, Warning  
tones, Alert for, or Profile name.  
Set a timed profile  
Timed profiles can prevent missed calls. For example, if you attend an event that  
requires your phone to be Silent, but you may forget to return it to Normal. A timed  
profile returns your phone to the default profile at the time you specify. Timed  
profiles can be set up to 24 hours in advance.  
1. In the standby mode, select Menu > Profiles.  
2. Select the profile to activate and select Timed for timed expiration.  
3. Enter the time for the profile to expire, and select OK.  
37  
     
S e t t i n g s  
8. Settings  
Use this menu to change the time settings, call settings, phone settings,  
display settings, tone settings, enhancement settings, security settings,  
network, network services, and to restore the factory settings.  
Call settings  
Location information sharing  
Location information sharing is a network service and must be supported by your  
wireless service provider. See "Network services," p. 6, for more information.  
Location info sharing allows the phone to share position information over the  
network. For calls to emergency numbers, this position information may be used by  
the emergency operator to determine the location of the phone. The functionality  
and accuracy of this feature is dependent on the network, satellite systems, and the  
agency that receives the information. It may not function in all areas or at all times.  
Location information is always shared with the network during emergency calls to  
the official emergency numberprogramed into the phone, regardless of which setting  
is selected. After you place an emergency call the phone remains in emergency  
mode for five minutes. During this time, the location information is shared with  
the network.  
In the standby mode, select Menu > Settings > Call settings > Location info  
sharing > 911 only or Location on > OK > OK.  
911 only—This is the default profile. The phone location information is shared only  
during an emergency call to the official emergency number programed into your  
phone. The phone screen displays  
standby mode.  
in the upper left hand corner when in the  
Location on—The phone location information is shared with the network whenever  
the phone is powered on and activated. The screen displays  
left-hand corner when in the standby mode.  
in the upper  
Anykey answer  
Anykey answer allows you to answer an incoming call with a brief press of any  
key except the power, right selection, or end key.  
In the standby mode, select Menu > Settings > Call settings > Anykey answer >  
On or Off.  
38  
     
S e t t i n g s  
Automatic redial  
Occasionally, your network may experience heavy traffic, which results in a fast  
busy signal when you dial. With automatic redial activated, your phone redials  
the number up to three times, and notifies you once the network is available.  
In the standby mode, select Menu > Settings > Call settings > Automatic redial >  
On or Off.  
1-touch dialing  
To activate or deactivate 1-touch dialing. In the standby mode, select Menu >  
Settings > Call settings > 1-touch dialing > On or Off. See "Set up 1-touch  
dialing," p. 23.  
Automatic update of service  
Your phone can receive updates to wireless services sent to your phone by your  
service provider. This option is a network service.  
Calling cards  
If you use a calling card for long distance calls, save the calling card number in  
your phone. The phone can store up to four calling cards. Contact your calling  
card company for more information.  
Save information  
1. In the standby mode, select Menu > Settings > Call settings > Calling card.  
2. Enter your security code, and select OK. See "Security settings," p. 48.  
3. Scroll to the calling card of your choice, select Options > Select > OK.  
4. Select one of the following sequence types:  
Access no. + phone no. + card no.—Dial the 1-800 access number, phone  
number, then enter the card number (plus PIN if required).  
Access no. + card no. + phone no.—Dial the 1-800 access number, card  
number (plus PIN if required), then enter the phone number.  
Prefix + phone no. + card no.—Dial the prefix (numbers that must precede  
the phone number) and phone number, then enter the card number  
(plus PIN if required).  
5. Enter the required information (access number or prefix and card number),  
and select OK to confirm your entries.  
6. Select Card name > enter the card name > OK.  
39  
       
S e t t i n g s  
Select a calling card  
You can select one of the calling cards for which you have saved information.  
The selected card information is used when you make a card call.  
1. In the standby mode, select Menu > Settings > Call settings > Calling card.  
2. Enter your security code, and select OK. See "Security settings," p. 48.  
3. Scroll to the calling card of your choice, and select Options > Select > OK.  
Make card calls  
After you have selected a calling card, make a card call.  
1. Enter the phone number, including any prefix (such as 0 or 1) that your  
calling card may require when you make a calling card call. See your calling  
card for instructions.  
2. Press and hold the send key key for a few seconds until Card call is displayed.  
3. Follow the instructions on the screen.  
4. When you hear the tone or system message, select OK.  
International prefix  
To store an international dialing prefix into your phone, enter + at the beginning  
of a phone number. Your phone automatically inserts the international dialing  
prefix that you stored.  
1. In the standby mode, select Menu > Settings > Call settings >  
International prefix.  
2. Enter the international dialing prefix (for example, 0011), and select OK.  
3. In the standby mode, enter + (press * key twice) and the phone number to call  
(for example, +3546789).  
The phone calls the international dialing prefix you have stored in your phone and  
the phone number you have entered (for example, the phone calls 0011354789).  
Call summary  
Your phone can display the time spent on a call when you hang up.  
In the standby mode, select Menu > Settings > Call settings > Call summary >  
On or Off.  
40  
S e t t i n g s  
Phone settings  
Phone language  
In the standby mode, select Menu > Settings > Phone settings > Phone language,  
and select the language: English or Español.  
The phone language you choose affects the time and date formats of the clock,  
alarm clock, and calendar.  
Automatic keyguard  
To set the keypad of your phone to lock automatically after a preset time delay  
(from 10 seconds to 60 minutes), do the following:  
1. In the standby mode, select Menu > Settings > Phone settings > Automatic  
keyguard > On or Off.  
2. If you select On, Set delay: is displayed.  
3. Enter the delay (in minutes and seconds), and select OK.  
Important: When keyguard is on, calls may be possible to the emergency  
number programed into your phone. Enter the emergency number, and press  
the send key. The number is displayed only after you enter the last digit.  
Touch tones  
Touch tones sound when you press the keys on your phone keypad. You can use  
touch tones for many automated dial-up services such as banking and airlines, or  
for entering your voice mailbox number and password.  
Touch tones are sent during an active call and can be sent manually from your  
phone keypad, or sent automatically by saving them in your phone.  
Set type  
1. In the standby mode, select Menu > Settings > Phone settings > Touch tones >  
Manual touch tones.  
2. Select one of the following options:  
Continuous—Sets tone sounds for as long as you press and hold a key  
Fixed—Sends tones of the duration you specify in the Touch tone length option  
Off—Turns off tones. No tones are sent when you press a key.  
41  
         
S e t t i n g s  
Set length  
To specify touch tone length when using the Fixed option, in the standby mode,  
select Menu > Settings > Phone settings > Touch tones > Touch tone length >  
Short (0.1 seconds) or Long (0.5 seconds).  
Welcome note  
You can write a welcome note that briefly appears on the display screen whenever  
you switch your phone on. Predictive text input is not available for entering  
welcome note text.  
1. In the standby mode, select Menu > Settings > Phone settings > Welcome note.  
2. Enter a note (up to 44 characters).  
Press * to display and select from the available special characters.  
3. When you are finished, select Options > Save to save the welcome note or  
Delete to delete the previous text and create another welcome note.  
Help text  
Your phone displays brief descriptions for most menu items. These descriptions  
are called help text.  
The default setting for help text is On. To turn help text on or off, in the standby  
mode, select Menu > Settings > Phone settings > Help text activation > On or Off.  
When Help text activation is turned On, select a feature or menu, pause for 10 to  
15 seconds, and wait for the help text to display. Use the scroll keys in view the  
complete help text, if necessary.  
Time and date settings  
Time  
Show or hide the clock  
In the standby mode, select Menu > Settings > Time settings > Clock > Show  
clock or Hide clock.  
Set the time  
1. In the standby mode, select Menu > Settings > Time settings > Clock >  
Set the time.  
2. Enter the time (in hh:mm format), and select OK.  
3. Select am or pm if you selected 12-hour format.  
42  
     
S e t t i n g s  
Change the format  
In the standby mode, select Menu > Settings > Time settings > Clock >  
Time format > 24-hour or 12-hour.  
Date  
Show or hide the date  
In the standby mode, select Menu > Settings > Time settings > Date > Show date  
or Hide date.  
Set the date  
1. In the standby mode, select Menu > Settings > Time settings > Date >  
Set the date.  
2. Enter the date, and select OK.  
Change the date format  
1. In the standby mode, select Menu > Settings > Time settings > Date.  
2. Scroll to Date format, and select a format.  
3. Scroll to and select the Date separator.  
4. Select a separator.  
Set the auto-update of date and time  
Auto-update is a network service. See "Network services," p. 6.  
If your wireless service provider supports this feature, you can allow the digital  
network to set the clock, which is useful when you are out of your home area,  
or when you have traveled to another network or time zone.  
In the standby mode, select Menu > Settings > Time settings > Auto-update of  
date & time > On, Confirm first, or Off.  
If you use the Auto-update of date & time option while outside your digital network,  
you may be prompted to enter the time manually. Network time will replace the  
time and date when you re-enter your digital network.  
If your battery has been removed or has drained outside the digital network, you  
may be prompted to enter the time manually (once the battery is replaced or  
recharged, and you are still outside of the digital network).  
43  
   
S e t t i n g s  
Display settings  
Wallpaper  
You can set your phone to display a background picture (wallpaper) in the standby  
mode. To activate or deactivate wallpaper, in the standby mode, select Menu >  
Settings > Display settings > Wallpaper > On or Off. To select the wallpaper you  
wish to display, do the following:  
1. In the standby mode, select Menu > Settings > Display settings > Wallpaper >  
Select wallpap.  
2. Highlight the Graphics folder, and select Open.  
3. Browse the folder.  
4. When you find an image, select Options > Set as wallpap.  
Color scheme  
You can change the color of some display components in your phone, such as  
indicators and signal bars.  
1. In the standby mode, select Menu > Settings > Display settings > Color schemes.  
2. Select the color scheme of your choice.  
Banner  
If your wireless service provider supports this feature, you can choose whether  
the display shows the operator logo or customized text when the device is in the  
idle state.  
In the standby mode, select Menu > Settings > Display settings > Banner >  
Default or Customize.  
Screen saver time-out  
The screen saver is activated when no function of the device is used after a preset  
period of time. Press any key to deactivate the screen saver. You can set your  
device to display a screen saver after a preset time or after a custom time (up to  
60 minutes) of your choosing.  
1. In the standby mode, select Menu > Settings > Display settings > Screen  
saver time-out.  
2. Scroll to and select the time-out option of your choice.  
3. To set a custom time (up to 60 minutes), select Other, enter the custom time,  
and select OK.  
44  
         
S e t t i n g s  
Display brightness  
You can change the brightness of your device display.  
1. In the standby mode, select Menu > Settings > Display settings >  
Display brightness.  
2. Scroll up or down to adjust the brightness level to your preference.  
3. Select OK to accept your settings.  
Backlight time-out  
You can choose whether the backlights will be always on, off, or on for a  
selected time.  
In the standby mode, select Menu > Settings > Display settings > Backlight  
time-out > 7 seconds, 15 seconds, 30 seconds, Always on, or Always off.  
Tone settings  
From this menu, you can adjust the ringing volume, keypad tones, and other tone  
settings for the currently active profile. See "Customize a profile," p. 37, for more  
information on profile settings.  
Select Menu > Settings > Tone settings, and one of the following options:  
Incoming call alert—Select how the device notifies you of an incoming call.  
Ringing tone—Select the ringing tone for incoming calls.  
Ringing volume—Set the volume of your ringing tone.  
Vibrating alert—Turn the vibrating alert On or Off.  
Message alert tone—Select the tone for received messages.  
Keypad tones—Set the volume of your keypad tones (or turn them off).  
Warning tones—Turn warning and confirmation tones On or Off.  
Alert for—Define which caller groups the selected profile will accept or decline.  
Phone details  
From this menu, you can check details of your phone service. Select Menu >  
Settings > Phone details, and one of the following options:  
User details—Display the mobile ID number (MIN) and own number (MDN).  
Version details—Display the device model, hardware version, and software version  
of the device.  
System details—Display the system ID, channel, preferred roaming list (PRL), mode,  
and frequency of the phone service.  
45  
   
S e t t i n g s  
Enhancement settings  
The enhancement settings menu is displayed only if the device is connected to a  
compatible enhancement.  
Important: The headset may affect your ability to hear sounds around  
you. Do not use the headset in situations that may endanger your safety.  
In the standby mode, select Menu > Settings > Enhancement settings > Headset,  
Handsfree, Loopset, TTY/TDD (carrier dependent), or Charger.  
Headset  
Scroll to and select an option to enter the submenu and modify its settings.  
Default profile—Choose the profile you wish to be automatically activated when  
a headset is connected.  
Automatic answer—Answer calls automatically after one ring when a headset  
is connected. Select On or Off.  
Handsfree  
Scroll to and select an option, to enter the submenu and modify its settings.  
Default profile—Select the profile to automatically activate when your device is  
connected to a car kit. See also "Customize a profile," p. 37.  
Automatic answer—Set so calls are answered automatically after one ring when  
a car kit is connected. Select On or Off.  
Lights—Choose to keep the device lights always on, or to shut off automatically  
after several seconds. Select On or Automatic.  
Loopset  
The loopset (for use with T-coil equipped hearing aids) is recommended for use  
with your device. Scroll to and select the option of your choice, to enter the  
submenu and select Use loopset > Yes or No to modify the settings.  
TTY/TDD  
Select Yes or No to use TTY/TDD. Check with the manufacturer of the TTY/TDD  
device for a connecting cable that is compatible with the Nokia device.  
TTY/TDD communications depend on network availability. Check with your  
service provider for availability and description of services.  
Set up the TTY/TDD profile  
To connect your device directly to the TTY/TDD device, set up the TTY/TDD profile.  
46  
       
S e t t i n g s  
1. Connect the HDA-10 headset adapter to the connector on the bottom of  
the device.  
2. Connect one end of the cable to the TTY/TDD device.  
3. Insert the other end of the cable into the headset jack on the HDA-10  
headset adapter.  
4. In the standby mode, select Menu > Settings > Enhancement settings > TTY/  
TDD > Use TTY > Yes.  
TTY/TDD calls  
Important: Some manufacturers of TTY/TDD devices suggest that the  
device be at least 18 inches from the TTY/TDD device. When connecting  
to any other device, read its user guide or contact its manufacturer for  
detailed instructions and safety information.  
Check with the manufacturer of the TTY/TDD device for a connecting cable  
that is compatible with the Nokia device.  
TTY/TDD communications depend on network availability. Check with your  
service provider for availability and description of services.  
Make a call  
1. In the standby mode, enter the number, and press the send key.  
2. When the receiving party answers, begin typing your conversation on the TTY/TDD.  
3. Press the end key to end the call.  
Receive a call  
1. Make sure the TTY/TDD device is connected to your device.  
2. Press the send key to answer the call, and type your responses on the TTY/TDD.  
3. Press the end key to end the call.  
Charger  
In the standby mode, select Menu > Settings > Enhancement settings > Charger,  
and one of the following options:  
Default profile—Choose the profile you wish to be automatically activated when  
your device is connected to the charger.  
Lights—Choose to keep the device lights always on or to shut off automatically  
after several seconds. Select On or Automatic.  
47  
 
S e t t i n g s  
Security settings  
When first accessing the security settings, enter the preset lock code. By default,  
this is the last four digits of your phone number. Your wireless service provider,  
may preset the lock code to a four-digit number such as 1234 or 0000. If these  
numbers do not work, contact your wireless service provider.  
Activate or deactivate phone lock  
The phone lock feature protects your device from unauthorized outgoing calls or  
unauthorized access to information stored in the device.  
To activate or deactivate the phone lock setting on your device:  
1. In the standby mode, select Menu > Settings > Security settings.  
2. Enter the lock code, and select OK. See "Change lock code," p. 49.  
3. Select Phone lock and one of the following options:  
Off—Immediately turns off the phone lock feature.  
Lock now—immediately turns on the phone lock feature.  
On power-up—Turns on the phone lock feature after power on.  
If you selected Lock now, you are prompted to enter your lock code when you  
select menu or the left softkey. When the lock code has been entered, phone lock  
deactivates and your device functions normally.  
When phone lock is activated, Phone locked is displayed each time you turn your  
device on or off.  
When the device is locked, calls still may be possible to the official emergency  
number programmed into your device.  
Call not allowed is displayed if you attempt to place a call while your device is  
locked. To answer a call with phone lock on, select Answer, or press the send key.  
Allow numbers when phone locked  
When phone lock is on, the only outgoing calls that can be made are to the  
emergency number programmed into your device (for example, 911) or the  
numbers stored in the Allowed no. when phone locked location.  
To add a number to the allowed list:  
1. In the standby mode, select Menu > Settings > Security settings.  
2. Enter the lock code and select OK. See "Security settings," p. 48.  
3. Select Allowed no. when phone locked. Highlight an empty location, select  
Assign, and enter the phone number; or select Assign > Search to recall the  
number from Contacts. Select OK.  
48  
       
S e t t i n g s  
Call an allowed phone number  
In the standby mode, enter an allowed number and press the send key.  
Change lock code  
The preset lock code is 1234 or the last four digits of your phone number.  
If you enter the wrong lock code 5 times in succession, you will not be able to enter  
a code for 5 minutes, even if you power off the device between incorrect entries.  
1. In the standby mode, select Menu > Settings > Security settings >  
Change lock code.  
2. Enter the new lock code (must be 4 characters in length), reenter the new  
lock code for verification, and select OK.  
When you change your lock code, make sure you store it in a safe place, away  
from your device. Avoid entering access codes similar to emergency numbers to  
prevent accidental emergency calls.  
Restrict calls  
You can restrict the calls your phone can make and receive. When calls are  
restricted, calls still may be possible to the official emergency number programed  
into your phone. Contact your service provider for additional information.  
1. In the standby mode, select Menu > Settings > Security settings >  
Call restrictions.  
2. Enter the security code, and select OK. See "Change lock code," p. 49.  
3. Select the type of calls you wish to restrict:  
Restrict outgoing calls > Blocked numbers or Allowed numbers > Select, Add  
restriction, Edit, or Delete—Calls cannot be made.  
Restrict incoming calls > Blocked numbers or Allowed numbers > Select, Add  
restriction, Edit, or Delete—Calls cannot be received.  
Voice privacy  
Voice privacy is a network service. See "Network services," p. 6. If your wireless  
service provider supports this feature, the voice privacy feature protects the  
privacy of your current phone conversation from other callers placing phone calls  
on your same network.  
In the standby mode, select Menu > Settings > Security settings > Voice privacy >  
On or Off.  
49  
     
S e t t i n g s  
Network  
The menu options in your device are based on your service provider’s network.  
The network determines which options actually appear in the phone menu. Check  
with your service provider for more information.  
The Network menu allows you to customize the way your device chooses a  
network in which to operate while you are within or outside of your primary or  
home system. Your device is set to search for the most cost-effective network. If  
your device cannot find a preferred network, it selects a network automatically  
based on the option you choose in the Network menu.  
Roaming options  
To set your device to roam or search for another network when you are not in  
your home area, do the following:  
1. In the standby mode, select Menu > Settings > Network > Roaming options.  
2. Select one of the following options:  
Home only—Make and receive calls in your home area only.  
Automatic—Phone automatically searches for service in another digital  
network. Automatic A scans the channels in the A carrier’s system. Automatic  
B scans the B system. The roaming rate applies when your are not in the home  
service area. When set to Automatic, there is no audible tone to signal that  
you are roaming. The appearance of the  
icon is the only indication that  
the device is roaming, and calls are charged at the roaming rate.  
3. Select OK, if necessary, to confirm the activation.  
Mode  
You can choose whether your device uses digital service.  
1. At the start screen, select Menu > Settings > Network > Mode.  
2. Select one of the following service options:  
Digital only—The device only works in digital mode.  
IS-95 per call—Allows calls on the IS-95 network. If no calls are placed ten  
minutes after IS-95 selection, calls return to the previous network selection.  
Network services  
The following features are network services. See "Network services," p. 6.  
50  
   
S e t t i n g s  
Store a feature code  
1. In the standby mode, select Menu > Settings > Network services >  
Network feature setting.  
2. Enter the feature code from your service provider (for example, *633  
Forward if busy), and select OK.  
3. Select the type of forwarding that matches the feature code you entered  
(for example, Call forwarding).  
The activated feature code is now stored in your device, and you are returned to  
the Feature code: field. Continue entering other feature codes (for example, *633),  
or press the endkey to return to standby mode. Once you enter a network feature  
code successfully, the feature becomes visible in the Network services menu.  
Call forwarding  
Call forwarding tells your network to redirect incoming calls to another number.  
Call forwarding is a network service and may not work the same in all networks,  
so contact your wireless provider for availability.  
Activate  
1. In the standby mode, select Menu > Settings > Network services > Call  
forwarding and select one of the following options: Forward all calls,  
Forward if busy, Forward if not answered, Forward if out of reach, or  
Cancel all call forwarding.  
2. Select Activate.  
3. Scroll to and select the destination to which your calls will be forwarded.  
4. Enter the number to which your calls, data, or other information will be  
forwarded, and select OK.  
Call waiting  
If your wireless provider supports this feature, call waiting notifies you of an  
incoming call even while you are in a call. You can then accept, decline, or ignore  
the incoming call.  
1. In the standby mode, select Menu > Settings > Network services > Call waiting >  
Activate or Cancel.  
2. During a call, select Answer or the send key to answer the waiting call.  
The first call is put on hold.  
3. Press the end key to end the active call.  
51  
   
S e t t i n g s  
Send own caller ID when calling  
If your wireless service provider supports this feature, you can prevent your number  
from appearing on the receiving party caller ID.  
In the standby mode, select Menu > Settings > Network services > Send my caller  
ID >Yes or No.  
Select your own phone number  
If your wireless service provider supports this feature, and you have more than  
one number, you can select the number to be used. In the standby mode, select  
Menu > Settings > Network services > Own number selection.  
Restore factory settings  
This option resets some of the menu settings to their original values. It does  
not delete data that you have entered or downloaded, or affect entries in your  
contacts list.  
In the standby mode, select Menu > Settings > Restore factory settings. Enter the  
security code, and select OK. See "Security settings," p. 48.  
52  
     
G a l l e r y  
9. Gallery  
Pictures and ring tones can be saved to folders in the Gallery, or to folders created  
of your own. Images and tones can be downloaded using web sites.  
Open the gallery  
In the standby mode, select Menu > Gallery where you can View folders, Add folder,  
Delete folder, and Rename folder.  
View folders  
1. In the standby mode, select Menu > Gallery > View folders > Images, Graphics,  
or Tones > Open.  
2. Scroll to and select an image, graphic or tones, and Options > Open, Delete,  
Move, Rename, Set as wallpap., Details or Sort.  
53  
 
G a m e s  
10. Games  
Challenge yourself or a friend to one of the fun games in your device: Air Glide,  
Bowling, and Sky Diver. Some menus listed are network services. Contact your  
wireless provider for more information.  
Play a game  
1. In the standby mode, select Menu > Games > Select game.  
2. Scroll to a game, and press the send key.  
3. Select one of the following options (if supported by the particular game):  
New game—Launch a new game.  
High scores—View the high scores for this game (if previously played).  
Instructions—View instructions for playing the game. Scroll down to read more.  
Game settings  
1. In the standby mode, select Menu > Games.  
2. Scroll to and select one of the following game submenus:  
Select game—Select a game or enter a game option list. See "Game details," p. 54.  
Memory—Check the available memory for games and game-related applications.  
Settings—Turn Game sounds, Game lights, and Shakes on or off.  
Game details  
To display the name, version, and size of a selected game, select Options > Details.  
54  
   
V o i c e  
11. Voice  
Voice tag dialing  
You can dial up to 25 stored numbers using voice tag dialing.  
Before using voice tags, note that:  
Voice tags are not language-dependent. They are dependent on the  
speaker's voice.  
You must say the name exactly as you said it when you recorded it.  
Voice tags are sensitive to background noise. Record voice tags, and use them  
in a quiet environment.  
Very short names are not accepted. Use long names and avoid similar names  
for different numbers.  
Note: The use of voice tags may be difficult in a noisy environment or  
during an emergency, so you should not rely solely upon voice dialing in  
all circumstances.  
Assign a voice tag  
Before you use voice dialing, assign a voice tag to the number.  
1. In the standby mode, scroll down to enter the contacts list.  
2. Highlight the contact to assign a voice tag, select Details > Options >  
Add voice tag > Start.  
3. Speak clearly into the microphone. Do not select Quit unless you want to  
cancel the recording.  
The device replays and then saves the recorded tag. The  
commands that have voice tags assigned.  
icon appears next to  
If the recording is not successful, your device displays Voice system error.  
Select Options > Add voice tag, and repeat Step 3.  
Dial a number  
In the standby mode, select and hold Contacts. When you hear several beeps,  
Speak now is displayed. Release Contacts. Pronounce the voice tag clearly into  
the microphone.  
When the device finds the voice tag, Found: is displayed, and the device automatically  
dials the number. If the device does not locate a number or recognize the voice tag,  
No match found is displayed.  
55  
   
V o i c e  
Voice tags  
After you have associated a voice tag to a contact, in the standby mode,  
select Menu > Voice > Voice tags > Options > Playback, Change, or Delete.  
Voice commands  
Set as many as five voice commands, to allow hands-free operation of certain  
device features.  
Assign a voice tag to a command  
Before using voice commands, you must first add a voice tag to the device function.  
1. In the standby mode, select Menu > Voice > Voice commands.  
2. Select the device function you wish to tag: Profiles, Voice mailbox, Voice recorder,  
or Call log.  
3. If necessary, scroll to an option associated with that function, and select  
Options > Add command.  
4. Select Start, and speak the voice tag clearly into the microphone.  
Note: Do not select Quit unless you want to cancel the recording.  
The device replays and saves the recorded tag.  
that have voice tags assigned.  
appears next to commands  
Activate a voice command  
After you have associated a voice tag with a device function, you can issue a  
command by speaking the voice tag.  
1. Select and hold Contacts.  
2. When Speak now is displayed, pronounce the voice tag clearly into  
the microphone.  
When the device finds the voice tag, Found: is displayed, and the device plays the  
recognized voice tag through the earpiece. The function you requested is activated.  
Options  
After you have associated a voice tag to a command, you can choose one of the  
following options. In the standby mode, select Menu > Voice > Voice commands >  
Options > Playback, Change, or Delete.  
56  
   
V o i c e  
Voice recorder  
This feature allows you to record speech or sound with your device and listen  
to them later. The total available time is 30 seconds if no memos have been  
stored. The maximum length of a recording depends on how much memory  
remains available.  
The recorder cannot be used when a data call or connection is active.  
Record speech or sound  
1. In the standby mode, select Menu > Voice > Voice recorder > Record.  
2. After the recorder start tone is heard, begin recording speech or sound.  
3. When you are finished recording, select Stop.  
4. Enter the title for the recording, and select OK.  
Options  
After you have saved the recording to the Recordings list, highlight the recording;  
and select one of the following options: Playback, Delete, Edit title, or Add alarm.  
57  
O r g a n i z e r  
12. Organizer  
Your device contains features to help organize your everyday life, including an  
alarm clock, calendar, calculator, countdown timer, and stopwatch.  
Alarm clock  
Set an alarm  
The alarm clock is based on the device clock. The alarm sounds an alert for any  
time you specify.  
1. In the standby mode, select Menu > Organizer > Alarm clock > Alarm time.  
2. Enter the time for the alarm (in hh:mm format), and select OK.  
3. Select am or pm if you select 12-hour format.  
Alarm on is displayed briefly in the display, and  
is displayed in the  
standby mode.  
Change the time  
1. In the standby mode, select Menu > Organizer > Alarm clock > Alarm time > On.  
2. Enter the time for the alarm (in hh:mm format), and select OK.  
3. Select am or pm (if you select12-hour format).  
Alarm on is displayed briefly, and  
is displayed in the standby mode.  
Set the alarm tone  
You can set the tone to play when the alarm sounds.  
1. In the standby mode, select Menu > Organizer > Alarm clock > Alarm tone.  
2. Highlight Standard, Ringing tone, or Open Gallery; and select a tone.  
Alarm conditions  
When the alarm sounds, your device beeps, vibrates (if vibrating alert is on for the  
currently active profile), and lights up the display. If you do not press a key, the  
alarm stops (snoozes) for 10 minutes, then sounds again.  
With the device on, select Stop to shut the alarm off, or select Snooze. The alarm  
stops for 10 minutes and Snooze on is displayed.  
58  
     
O r g a n i z e r  
If the alarm time is reached while the device is switched off, the device switches  
itself on and starts sounding the alarm tone. If you select Stop, the device asks  
whether you want to activate the device for calls. Select No to switch off the  
device or Yes to make and receive calls. Do not select Yes when wireless device  
use may cause interference or danger.  
Turn an alarm off  
In the standby mode, select Menu > Organizer > Alarm clock > Alarm time > Off.  
Calendar  
The calendar tracks reminders, calls to make, meetings, and birthdays. It can even  
sound an alarm for any of these events.  
Monthly view provides an overview of the selected month and weeks. It also  
allows you to jump to a specific date. Any days or dates that appear in bold font  
contain calendar notes such as a meeting or reminder.  
Open  
In the standby mode, select Menu > Organizer > Calendar.  
Move the cursor in some calendar views with the up and down scroll keys.  
Go to a date  
1. In the standby mode, select Menu > Organizer > Calendar > Options > Go to date.  
2. Enter the date (for example, mm/dd/yyyy), and select OK.  
Note a specific date  
You can choose from five types of notes: Meeting, Call, Birthday, Memo, and  
Reminder. Your device asks for further information depending on which note  
you choose. You also have the option to set an alarm for any note that you select.  
1. Go to the date for which you want to set a reminder. See "Go to a date," p. 59,  
in the previous section if you need more information.  
2. From the monthly view (with the go to date highlighted), select Options >  
Make a note, and one of the following note types:  
Meeting—Enter a subject, a location, and a start and end time. You can then  
set an alarm.  
Call—Enter a phone number, a name, and the time. You can then set an alarm.  
Birthday—Enter the person’s name, and year of birth. You can then set an alarm.  
59  
   
O r g a n i z e r  
Memo—Enter a subject and an end date, and set an alarm.  
Reminder—Enter the subject, and set an alarm.  
3. Enter your note, and select Options > Save.  
View notes (day view)  
To view the created calendar notes, do the following:  
1. In the standby mode, select Menu > Organizer > Calendar.  
2. Scroll to the date that has a note. (Days with notes are in bold font.)  
3. Select Options > View day.  
4. To view a highlighted note, select Options > View.  
Send a note  
1. In the standby mode, select Menu > Organizer > Calendar.  
2. Scroll to the date containing the note. Any days containing notes are in bold font.  
3. Select Options > View day.  
4. Scroll to the note, and select Options > Send note > Via calendar or Via text  
msg. The note is sent to another device in calendar-to-calendar (vCal) format  
(if supported in the receiving phone) or as a plain text message.  
5. If you selected Via calendar, enter the number for the recipient or select  
Search to retrieve a number from the contacts list, and select OK.  
6. If you selected Via text msg., the note appears as a text message.  
7. Select Add number.  
8. Enter the number for the recipient, or select Search to retrieve a number from  
the contacts list, and select OK.  
9. Select Options > Send.  
Receive notes  
When you receive a calendar note in calendar-to-calendar (vCal) format, Calendar  
note received is displayed. When you receive a calendar note as a text message, a  
message notification appears in the standby mode. You can then view, save, or  
discard the note, and set an alarm for any date and time.  
60  
O r g a n i z e r  
Calculator  
The calculator in your device adds, subtracts, multiplies, divides, calculates the  
square and the square root, changes the sign of the number entered, and  
converts currency values.  
Note: This calculator has a limited accuracy and is designed for  
simple calculations.  
1. In the standby mode, select Menu > Organizer > Calculator.  
2. Enter the first number in the calculation.  
Press # for a decimal point if necessary.  
Press * to cycle through the add (+), subtract (-), multiply (*), and divide (/)  
characters. Pause briefly to select the displayed character.  
3. Enter the second number in your calculation.  
4. Select Options (equals is highlighted).  
To perform a square or square root calculation, selectOptions > Square or Square root.  
To change the sign, select Options > Change sign, or scroll to the key.  
Countdown timer  
You can enter a specified countdown time (up to 99 hours and 59 minutes).  
When the time runs out, your device sounds an alarm. The countdown timer only  
works when the device is on.  
Set the countdown timer  
1. In the standby mode, select Menu > Organizer > Countdown timer.  
2. Enter the time (in hh:mm format), and select OK.  
3. Enter a note for the timer, and select OK.  
The  
icon appears in the standby mode when the countdown timer is set.  
When the time runs out, your device sounds an alarm, displays the timer note,  
and flashes its lights.  
Press any key during the alarm to stop the timer.  
After 30 seconds the timer alert expires automatically.  
Change the time  
After you have set the timer, you can change the time.  
1. In the standby mode, select Menu > Organizer > Countdown timer > Change time.  
2. Enter the new time, and select OK.  
3. Leave the note as it was, or enter a new note, and select OK.  
61  
   
O r g a n i z e r  
Stop the timer  
After you have set the timer, you can stop the timer at any time.  
In the standby mode, select Menu > Organizer > Countdown timer > Stop timer.  
Stopwatch  
Your device has a stopwatch that displays time in hours, minutes, seconds, and  
fractions of a second in hh:mm:ss:s format.  
Using the stopwatch or allowing it to run in the background when using other  
features increases the demand on battery power and reduces the battery life.  
Measure time  
1. In the standby mode, select Menu > Organizer > Stopwatch > Split timing or  
Lap timing > Start. The running time is displayed on the screen.  
2. Select Split to note the lapsed time.  
The timer continues to run. The split time appears below the running time. If  
you split the time more than once, the new measured time appears at the  
beginning of the list. Scroll to see previous measured times.  
3. Select Lap to note the lap time.  
The clock stops, then starts immediately from zero. The lap time appears below  
the running time. If you take more than one lap time, the new measured time  
appears at the beginning of the list. You can scroll to see previous measured  
times. When you select Stop, the total time appears at the top.  
4. Select Stop to end the timing. The total time is displayed on the screen.  
5. Select Options > Save to save the split or lap time.  
6. Enter a name for the measurement, and select OK. If you do not enter a name,  
the total time is used as the default title for the time.  
Operation note  
If you press the end key and return to standby mode, the clock continues to run in  
the background and  
appears in the upper left corner of the screen.  
To return to the stopwatch screens:  
1. In the standby mode, select Menu > Organizer > Stopwatch >Continue.  
2. To stop the clock, select Stop.  
Options  
The following options are available with the stopwatch: Continue, Show last  
time, Split timing, Lap timing, View times, and Delete times.  
62  
 
P C C o n n e c t i v i t y  
13. PC Connectivity  
You can synchronize contacts and calendar between your device and a compatible  
PC. Some of the features available in PC Suite are carrier-dependent.  
Check www.nokiausa.com/support or your local Nokia Web site for the latest  
version of this guide, additional information, downloads, and services related to  
your Nokia product.  
Important: Only install and use applications and other software  
from sources that offer adequate security and protection against  
harmful software.  
63  
 
E n h a n c e m e n t s  
14. Enhancements  
Check the model number of any charger before use  
with this device. This device is intended for use when  
supplied with power from an approved charger only.  
Warning: Use only batteries, chargers, and enhancements approved by  
Nokia for use with this particular model. The use of any other types may  
invalidate any approval or warranty, and may be dangerous.  
For availability of approved enhancements, please check with your dealer. When  
you disconnect the power cord of any enhancement, grasp and pull the plug, not  
the cord.  
A few practical rules about accessories and enhancements  
Keep all accessories and enhancements out of the reach of small children.  
When you disconnect the power cord of any accessory or enhancement, grasp  
and pull the plug, not the cord.  
Check regularly that enhancements installed in a vehicle are mounted and  
are operating properly.  
Installation of any complex car enhancements must be made by qualified  
personnel only.  
Power  
Standard 1150 mAh Li-Ion Battery  
Standard Travel Charger  
Vehicle Power Charger  
Audio  
Headset  
FM Radio Headset  
Car  
Handsfree Car Kit  
Headrest Handsfree  
64  
 
B a t t e r y i n f o r m a t i o n  
15. Battery information  
Charging and discharging  
Your device is powered by a rechargeable battery. The full performance of a new  
battery is achieved only after two or three complete charge and discharge cycles.  
The battery can be charged and discharged hundreds of times but it will eventually  
wear out. When the talk and standby times are noticeably shorter than normal,  
replace the battery. Use only Nokia approved batteries, and recharge your battery  
only with Nokia approved chargers designated for this device.  
If a replacement battery is being used for the first time or if the battery has not  
been used for a prolonged period, it may be necessary to connect the charger  
then disconnect and reconnect it to begin charging the battery.  
Unplug the charger from the electrical plug and the device when not in use. Do not  
leave the battery connected to a charger. Overcharging may shorten its lifetime.  
If left unused, a fully charged battery will lose its charge over time.  
If the battery is completely discharged, it may take a few minutes before the charging  
indicator appears on the display or before any calls can be made.  
To prolong battery life of NiMh batteries, discharge the battery from time to time  
by leaving your device switched on until it turns itself off. Do not attempt to  
discharge the battery by any other means.  
Use the battery only for its intended purpose. Never use any charger or battery  
that is damaged.  
Do not short-circuit the battery. Accidental short-circuiting can occur when a  
metallic object such as a coin, clip, or pen causes direct connection of the  
positive (+) and negative (-) terminals of the battery. (These look like metal strips  
on the battery.) This might happen, for example, when you carry a spare battery  
in your pocket or purse. Short-circuiting the terminals may damage the battery  
or the connecting object.  
Leaving the battery in hot or cold places, such as in a closed car in summer or  
winter conditions, will reduce the capacity and lifetime of the battery. Always try  
to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot  
or cold battery may not work temporarily, even when the battery is fully charged.  
Battery performance is particularly limited in temperatures well below freezing.  
Do not dispose of batteries in a fire as they may explode. Batteries may also explode  
if damaged. Dispose of batteries according to local regulations. Please recycle  
when possible. Do not dispose batteries as household waste.  
65  
 
B a t t e r y i n f o r m a t i o n  
Nokia battery authentication guidelines  
Always use original Nokia batteries for your safety. To check that you are getting an  
original Nokia battery, purchase it from an authorized Nokia dealer, look for the  
Nokia Original Enhancements logo on the packaging and inspect the hologram  
label using the following steps:  
Successful completion of the four steps is not a total assurance of the authenticity  
of the battery. If you have any reason to believe that your battery is not an authentic  
original Nokia battery, you should refrain from using it and take it to the nearest  
authorized Nokia service point or dealer for assistance. Your authorized Nokia  
service point or dealer will inspect the battery for authenticity. If authenticity  
cannot be verified, return the battery to the place of purchase.  
Authenticate hologram  
1. When looking at the hologram on the label, you  
should see the Nokia connecting hands symbol  
from one angle and the Nokia Original Enhancements  
logo when looking from another angle.  
2. When you angle the hologram left, right, down,  
and up, you should see 1, 2, 3, and 4 dots on  
each side respectively.  
3. Scratch the side of the label to reveal a 20-digit  
code, for example 12345678919876543210.  
Turn the battery so that the numbers are facing  
upwards. The 20-digit code reads starting from  
the number at the top row followed by the  
bottom row. Confirm that the 20-digit code is  
valid by following the instructions at  
66  
B a t t e r y i n f o r m a t i o n  
What if your battery is not authentic?  
If you cannot confirm that your Nokia battery with the hologram on the label is  
an authentic Nokia battery, please do not use the battery. Take it to the nearest  
authorized Nokia service point or dealer for assistance. The use of a battery that  
is not approved by the manufacturer may be dangerous and may result in poor  
performance and damage to your device and its enhancements. It may also  
invalidate any approval or warranty applying to the device.  
To find out more about original Nokia batteries, visit www.nokia.com/battery.  
67  
C a r e a n d m a i n t e n a n c e  
Care and maintenance  
Your device is a product of superior design and craftsmanship and should be treated  
with care. The suggestions below will help you protect your warranty coverage.  
Keep the device dry. Precipitation, humidity and all types of liquids or moisture  
can contain minerals that will corrode electronic circuits. If your device does  
get wet, remove the battery and allow the device to dry completely before  
replacing it.  
Do not use or store the device in dusty, dirty areas. Its moving parts and electronic  
components can be damaged.  
Do not store the device in hot areas. High temperatures can shorten the life of  
electronic devices, damage batteries, and warp or melt certain plastics.  
Do not store the device in cold areas. When the device returns to its normal  
temperature, moisture can form inside the device and damage electronic  
circuit boards.  
Do not attempt to open the device other than as instructed in this guide.  
Do not drop, knock, or shake the device. Rough handling can break internal  
circuit boards and fine mechanics.  
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean  
the device.  
Do not paint the device. Paint can clog the moving parts and prevent  
proper operation.  
Use a soft, clean, dry cloth to clean any lenses (such as camera, proximity  
sensor, and light sensor lenses).  
Use only the supplied or an approved replacement antenna. Unauthorized  
antennas, modifications, or attachments could damage the device and may  
violate regulations governing radio devices.  
Use chargers indoors.  
Always create a backup of data you want to keep, such as contacts and  
calendar notes, before sending your device to a service facility.  
All of the above suggestions apply equally to your device, battery, charger, or any  
enhancement. If any device is not working properly, take it to the nearest authorized  
service facility for service.  
68  
 
A d d i t i o n a l s a f e t y i n f o r m a t i o n  
Additional safety information  
Operating environment  
Remember to follow any special regulations in force in any area and always switch  
off your device when its use is prohibited or when it may cause interference or  
danger. Use the device only in its normal operating positions. This device meets  
RF exposure guidelines when used either in the normal use position against the  
ear or when positioned at least 2.2 centimeters (7/8 inches) away from the body.  
When a carry case, belt clip or holder is used for body-worn operation, it should  
not contain metal and should position the device the above-stated distance from  
your body.  
In order to transmit data files or messages, this device requires a good quality  
connection to the network. In some cases, transmission of data files or messages  
may be delayed until such a connection is available. Ensure the above separation  
distance instructions are followed until the transmission is completed.  
Medical devices  
Operation of any radio transmitting equipment, including wireless phones, may  
interfere with the functionality of inadequately protected medical devices.  
Consult a physician or the manufacturer of the medical device to determine if  
they are adequately shielded from external RF energy or if you have any questions.  
Switch off your device in health care facilities when any regulations posted in  
these areas instruct you to do so. Hospitals or health care facilities may be using  
equipment that could be sensitive to external RF energy.  
Pacemakers  
Pacemaker manufacturers recommend that a minimum separation of 15.3  
centimeters (6 inches) be maintained between a wireless phone and a pacemaker  
to avoid potential interference with the pacemaker. These recommendations are  
consistent with the independent research by and recommendations of Wireless  
Technology Research. Persons with pacemakers should:  
Always keep the device more than 15.3 centimeters (6 inches) from the  
pacemaker when the device is switched on.  
Do not carry the device in a breast pocket.  
Hold the device to the ear opposite the pacemaker to minimize the potential  
for interference.  
If you suspect interference, switch off your device, and move the device away.  
69  
 
A d d i t i o n a l s a f e t y i n f o r m a t i o n  
Hearing aids  
Some digital wireless devices may interfere with some hearing aids. If interference  
occurs, consult your service provider.  
Vehicles  
RF signals may affect improperly installed or inadequately shielded electronic  
systems in motor vehicles such as electronic fuel injection systems, electronic  
antiskid (antilock) braking systems, electronic speed control systems, air bag  
systems. For more information, check with the manufacturer or its representative  
of your vehicle or any equipment that has been added.  
Only qualified personnel should service the device, or install the device in a vehicle.  
Faulty installation or service may be dangerous and may invalidate any warranty  
that may apply to the device. Check regularly that all wireless device equipment in  
your vehicle is mounted and operating properly. Do not store or carry flammable  
liquids, gases, or explosive materials in the same compartment as the device, its  
parts, or enhancements. For vehicles equipped with an air bag, remember that air  
bags inflate with great force. Do not place objects, including installed or portable  
wireless equipment in the area over the air bag or in the air bag deployment area.  
If in-vehicle wireless equipment is improperly installed and the air bag inflates,  
serious injury could result.  
Using your device while flying in aircraft is prohibited. Switch off your device  
before boarding an aircraft. The use of wireless teledevices in an aircraft may be  
dangerous to the operation of the aircraft, disrupt the wireless telephone network,  
and may be illegal.  
Potentially explosive environments  
Switch off your device when in any area with a potentially explosive atmosphere and  
obey all signs and instructions. Potentially explosive atmospheres include areas  
where you would normally be advised to turn off your vehicle engine. Sparks in such  
areas could cause an explosion or fire resulting in bodily injury or even death. Switch  
off the device at refuelling points such as near gas pumps at service stations. Observe  
restrictions on the use of radio equipment in fuel depots, storage, and distribution  
areas; chemical plants; or where blasting operations are in progress. Areas with a  
potentially explosive atmosphere are often but not always clearly marked. They  
include below deck on boats, chemical transfer or storage facilities, vehicles  
using liquefied petroleum gas (such as propane or butane), and areas where the  
air contains chemicals or particles such as grain, dust, or metal powders.  
70  
A d d i t i o n a l s a f e t y i n f o r m a t i o n  
Emergency calls  
Important: Wireless phones, including this device, operate using radio  
signals, wireless networks, landline networks, and user-programed  
functions. Because of this, connections in all conditions cannot be  
guaranteed. You should never rely solely on any wireless phone for  
essential communications like medical emergencies.  
To make an emergency call:  
1. If the phone is not on, switch it on. Check for adequate signal strength.  
2. Press the end key as many times as needed to clear the display and ready the  
phone for calls.  
3. Enter the official emergency number for your present location. Emergency  
numbers vary by location.  
4. Press the send key.  
If certain features are in use, you may first need to turn those features off before  
you can make an emergency call. Consult this guide or your service provider for  
more information.  
When making an emergency call, give all the necessary information as accurately  
as possible. Your wireless device may be the only means of communication at the  
scene of an accident. Do not end the call until given permission to do so.  
71  
 
A d d i t i o n a l s a f e t y i n f o r m a t i o n  
Certification information (SAR)  
This mobile device meets guidelines for exposure to radio waves.  
Your mobile device is a radio transmitter and receiver. It is designed not to  
exceed the limits recommended by international guidelines. These guidelines  
were developed by the independent scientific organization ICNIRP and include  
safety margins designed to assure the protection of all person, regardless of age  
and health.  
The exposure guidelines for mobile devices employ a unit of measurement known  
as the Specific Absorption Rate or SAR. The SAR limit set by ICNIRP is 2.0 watts/  
kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR are conducted  
using standard operating positions with the device transmitting at its highest  
certified power level in all tested frequency bands. The actual SAR level of an  
operating device can be well below the maximum value because the device is  
designed to use only the power required to reach the network. That amount  
changes depending on a number of factors such as how close you are to a  
network base station. The highest SAR value when tested according to  
international testing procedures for use at the ear is 0.72 W/kg.  
Use of device accessories and enhancements may result in different SAR values.  
SAR values may vary depending on national reporting and testing requirements  
and the network band. Additional SAR information may be provided under  
product information at www.nokia.com.  
Your mobile device is also designed to meet the requirements for exposure to  
radio waves established by the Federal Communications Commission (USA) and  
Industry Canada. These requirements set a SAR limit of 1.6 W/kg averaged over  
one gram of tissue. The highest SAR value reported under this standard during  
product certification for use at the ear is 1.21 W/kg and when properly worn on  
the body is 1.17 W/kg.  
Information about this device can be found on the FCC's website at  
http://www.fcc.gov/oet/fccid by searching the equipment authorization system  
using FCC ID: QMNRH-71.  
72  
 
A d d i t i o n a l s a f e t y i n f o r m a t i o n  
Technical information  
Dimensions—Width 49.9 mm (1.96 inches); length 108.3 mm (4.26 in); depth  
23.2 mm (0.91 in)  
Weight—3.84 oz (108.8 g) with BL-6C Li-Ion Battery  
Volume—5.95 in3 (97.5cm3)  
Frequency range (Tx)—PCS 1851.25–1908.75 MHz;  
Cellular 824.70–848.37 MHz  
Frequency range (Rx)—PCS 1931.25–1988.75 MHz;  
Cellular 869.70–893.37 MHz  
GPS frequency—1575.42 MHz  
Battery information  
This section provides information about battery charging time with the  
Travel Charger (ACP-12) talk-times, and standby times. Be aware that the  
information in this section is subject to change. For more information,  
contact your service provider.  
Charging time  
The following charging time is approximate with the BL-6C 1150 mAh  
Li-Ion battery:  
Travel Charger (ACP-12): up to 2 hours  
Talk and standby times  
Operation times are estimates only and depend on signal strength, phone use,  
network conditions, features used, battery age and condition (including charging  
habits), temperatures to which the battery is exposed, and many other factors.  
Talk time: up to 4 hours cellular and 4.4 hours PCS  
Standby time: up to 13 days  
73  
       
I n d e x  
Index  
calls  
answering 18  
making 17  
certification information (SAR) 72  
charger  
connecting 16  
color schemes 44  
contacts list 22  
add 22  
NUMERICS  
1-touch dialing 23  
A
activate phone lock 48  
Add-ins 33  
alarm clock 58  
allowed number when  
phone locked — add 48  
antenna 14  
delete 25  
anykey answer 38  
automate voicemail 33  
automatic redial 39  
automatic update of service 39  
auto-update 43  
edit 24  
send 26  
view 26  
countdown timer 61  
customer care 9  
B
D
back cover  
deactivate phone lock 48  
dialing codes 34  
removing 15  
replacing 16  
display language 41  
display settings 44  
distribution list 29  
backlight timeout 45  
banner 44  
battery  
charging 16  
charging time 73  
removing 15  
E
emergency calls 71  
with keypad locked 41  
enhancement settings 46  
handsfree 46  
replacing 15  
talk and standby times 73  
battery information 73  
business cards 26  
headset 46  
music stand 47  
TTY/TDD 46  
C
enhancements 64  
ESN 8  
calculator 61  
calendar 59  
call duration 36  
call forwarding 51  
call log 35  
caller groups 23  
calling cards 39  
F
FCC information 72  
feature codes 51  
flashlight 11  
74  
 
G
R
gallery 53  
games 54  
restore factory settings 52  
restrict calls 49  
H
S
handsfree 46  
headset 16, 46  
help 8  
safety 5  
screen saver 44  
scrolling 12  
help text 13, 42  
security code 13  
security feature 13  
security features 13  
security settings 48  
send own caller ID 52  
set  
date 43  
time 42  
settings 38  
I
indicators and icons 11  
K
Keyguard 19  
automatic 41  
shortcuts 13  
L
standard mode 20  
start screen 11  
stopwatch 62  
languages 41  
lock code 13, 49  
loudspeaker 18  
T
M
talk and standby times 73  
technical information 73  
text entry 20  
message folders 31  
messages  
predictive text 20  
standard 20  
delete 31  
text messages 28  
music stand 47  
text messages 28  
time and date settings 42  
timed profiles 37  
tone settings 45, 50  
touch tones 41  
O
organizer 58  
TTY/TDD 46  
turn phone off 16  
turn phone on 16  
P
phone lock  
change lock code 49  
phone settings 41  
predictive text 20  
profiles 37  
V
view  
call duration 36  
call times 36  
dialed numbers 35  
missed calls 35  
Q
quick keys 11  
75  
I n d e x  
own phone number 52  
volume  
adjusting 18  
using the loudspeaker 18  
received calls 35  
saved messages 31  
voice 55  
voice commands 56  
voice dialing 55  
Voice mail — connect to 33  
voice privacy 49  
W
wallpaper 44  
welcome note 42  
voice recorder 57  
76  
NOTES  
77  
NOTES  
78  
NOTES  
79  
NOTES  
80  

Motorola W260g User Manual
Motorola i550plus User Manual
Motorola FLIPOUT 68004121004 User Manual
Microsoft Sql Server 2008 R2 Small Business Edition C9C00500 User Manual
Mellerware CJ100 User Manual
Logic 3 CD Player INSTRUCTION MANUAL User Manual
KitchenAid KCM515 User Manual
Jura Capresso X7 User Manual
Fujitsu Computer Drive C120 H007 06EN User Manual
Emerson CKS3020 User Manual