Nikon Cell Phone Accessories S6600 User Manual

En  
Wireless Mobile Utility (Android)  
Users Manual  
Install the Wireless Mobile Utility on your smart device (smart-  
phone or tablet) to download pictures from a camera or take  
pictures remotely.  
The Wireless Mobile Utility supports the following cameras.  
Some feature built-in Wi-Fi, while others require an optional  
wireless mobile adapter. See the section for your camera for  
more information on using the Wireless Mobile Utility.  
D610, D600, D7100, D5300, D5200, Df  
D3200, COOLPIX A  
0226  
A
B
C
D
Nikon 1: V2, J3, S1, AW1  
COOLPIX: P7800, P520, P330, S9500, S6600,  
S6500, S5200, AW110  
7599  
0
Save where otherwise noted, the camera illustrations in this  
manual show the D3200.  
AꢀTrademarkꢀInformation  
Wi-Fi is a registered trademark of the Wi-Fi Alliance. GOOGLE PLAY  
is a trademark of Google Inc. All other trade names mentioned in  
this manual are the trademarks or registered trademarks of their  
respective holders.  
1
Notices  
• No part of this manual may be reproduced, transmitted, tran-  
scribed, stored in a retrieval system, or translated into any lan-  
guage in any form without Nikon’s prior written permission.  
• Nikon reserves the right to change the specifications of the hard-  
ware and software described in this manual at any time and  
without prior notice. Nikon will not be held liable for damages  
that may result from any mistakes that this manual may contain.  
SystemꢀRequirements  
Before installing the Wireless Mobile Utility, confirm that your  
smart device meets the following system requirements:  
Smartphone: Android 2.3 series, Android 4.x series  
Tablet: Android 4.x series  
OS  
WirelessꢀLAN  
11b/g/n  
Screenꢀresolution 800 × 480 pixels (WVGA) or higher  
DꢀUsingꢀThisꢀApplicationꢀforꢀtheꢀFirstꢀTime  
You must accept the terms and conditions of the End User License  
Agreement (EULA) before connecting.  
A
3
InstallingꢀtheꢀApp  
Locate the app on Google Play.  
Connect to Google Play on the smart device and search for  
“Wireless Mobile Utility.  
1
Install the app.  
Install the Wireless Mobile Utility.  
2
EstablishingꢀaꢀWirelessꢀConnection  
The following applies only to cameras without built-in Wi-Fi. For  
information on cameras with built-in Wi-Fi, see the manual pro-  
vided with the camera.  
Connect the wireless mobile adapter.  
1
Attach the wireless mobile adapter to the camera and turn  
the camera on. See the manual supplied with the wireless  
mobile adapter for details.  
Ready the smart device.  
Select Wi-Fi settings > WPS button connection. The smart  
2
device will wait for a signal from the camera.  
Press the WPS button.  
3
Press the WPS button on the wireless mobile adapter for  
about 5 s until the LED on the wireless mobile adapter flash-  
es red and green.  
Launch the Wireless Mobile Utility.  
4
When a connection is established, the LED on the wireless  
mobile adapter will glow green and the main dialog for the  
Wireless Mobile Utility will be displayed on the smart de-  
vice. For information on taking pictures, see page 6. For in-  
formation on viewing pictures, see page 11.  
A
4
 
AꢀWPS  
WPS (Wi-Fi Protected Setup) is a standard designed to make it easy  
to establish a secure wireless network. For information on the steps  
involved and the length of time the smart device will wait for a con-  
nection, see the documentation supplied with the smart device.  
AꢀManualꢀWirelessꢀConnections  
1ꢀ Display Wi-Fi settings for the smart device.  
2ꢀ Select the appropriate SSID (the default SSID begins with  
“Nikon”). If you are using a wireless mobile adapter, the LED will  
light green when a connection is established.  
AꢀConnectionꢀStatus  
Connection status is shown by an icon in the  
home display:  
: Connection established.  
: No connection. Tap the icon to open the  
smart device Wi-Fi settings menu and check  
Wi-Fi settings.  
DꢀTheꢀWirelessꢀMobileꢀAdapter  
While the adapter is inserted, the camera exposure meters will not  
turn off; monitor the camera battery level to ensure that the cam-  
era does not power off unexpectedly. In addition, some camera  
menu items may be grayed out and unavailable and the camera  
can not be used for playback or live view. Movie recording can  
not be used.  
A
5
TakingꢀPhotos  
Take pictures remotely from the smart device, or take pictures  
with the camera and save them to the smart device.  
Remote Photography  
Follow the steps below to take photos from the smart device.  
Tap Take photos.  
The camera viewfinder will go dark and the smart device  
will display the view through the camera lens.  
1
Focus.  
2
In normal- and wide-area AF AF-area modes, tap the subject  
in the display to focus (if subject-tracking AF is selected, the  
camera will focus using wide-area AF).  
A
6
   
Tap the shutter icon.  
3
The shutter will be released after you  
remove your finger from the icon; the  
resulting photo is first saved to the cam-  
era memory card and then downloaded  
to the smart device. There is no need to  
point the smart device at the camera.  
DꢀRemoteꢀPhotography  
Remote photography ends automatically when the battery in the  
camera or smart device runs low. Note that using remote pho-  
tography for an extended period may cause the camera’s internal  
temperature to rise; if necessary, remote photography will end au-  
tomatically to minimize damage to camera circuits.  
The smart device can not be used to adjust camera settings; use  
camera controls to adjust settings before starting Step 1. Regard-  
less of the release mode selected with the camera, only one picture  
will be taken each time you tap the shutter icon. Note that the  
display may not update smoothly depending on the device and  
network conditions.  
A shutter speed of “Time” is available in mode M. Choose a shut-  
ter speed of A on the camera and select remote photography  
mode on the smart device, then tap the shutter icon to open the  
shutter. Shooting ends when the icon is tapped again. Note that  
the smart device will not display the view through the camera lens  
at a shutter speed of “Bulb, and that the smart device can not be  
used in shooting mode whenTimeis selected.  
A
7
AꢀTheꢀRemoteꢀPhotographyꢀDisplay  
Mode selection: Tap  
capture mode (page 9).  
to select photo  
Settings: The following photography-  
related options can be accessed from  
the smart device menu:  
Live view: Turn the live view display  
on or off.  
Remote shooting auto download:  
Choose whether to download pictures  
to the smart device after shooting (re-  
mote shooting mode only).  
Self-timer: If ON is selected, the cam-  
era shutter will be released 2 s after  
you tap the shutter icon. The timer  
turns off automatically after the shut-  
ter is released.  
Self-timer icon: Displayed when the self-  
timer is on.  
Camera settings: Shutter speed, aperture,  
etc. Not displayed when device is in  
landscape orientation.  
Thumbnail area: Downloaded pictures.  
A
8
Downloading Photos as They Are Taken  
Take photos with the camera and save them to the smart device.  
Tap Take photos.  
1
Tap  
.
2
The dialog shown below at right will be displayed (page 10).  
A
9
 
Take photos.  
3
Frame photos in the camera viewfinder and shoot. Photos  
are downloaded to the smart device after being saved to  
the camera memory card.  
AꢀTheꢀPhotoꢀCaptureꢀDisplay  
The photo capture display is shown below.  
Mode selection: Tap  
to select remote  
shooting mode (page 6).  
Thumbnail area: Downloaded pictures.  
A
10  
 
ViewingꢀPhotos  
Tap View photos to view the pictures stored on the smart de-  
vice. You can also view the pictures on the camera memory card  
and download selected images to the smart device.  
Viewing Pictures  
View the pictures in camera memory or on the smart device.  
Tap View photos.  
1
D5300: If the camera contains pictures currently selected  
for transmission to the smart device, a confirmation dialog  
will be displayed. Tap Cancel to view pictures.  
A
11  
   
Choose a device.  
2
Tap Pictures on camera to view the pictures on the camera  
memory card, Pictures on smart device to view the pictures  
stored on the smart device. The pictures will be displayed  
as smallthumbnailimages (in some cases, a folder list may  
be displayed; tap a folder to view the pictures it contains).  
View pictures.  
3
Tap a thumbnail to display the picture  
full frame. You can then swipe left or  
right to view additional pictures.  
A
12  
AꢀTheꢀFull-FrameꢀDisplay  
The full-frame display is shown below.  
Return to shooting  
mode (available only  
if display was accessed  
by tapping thumbnail  
in shooting display)  
Tap picture to hide or  
view icons  
Zoom in or out  
DꢀMovies  
Movies can not be viewed using the Wireless Mobile Utility, but  
movies can be played back by tapping the movie or playback icon  
in the thumbnail list to display a list of movie apps and choosing  
an app from the list.  
A
13  
AꢀFolders  
Downloaded pictures are stored in folders with names consisting  
of “C” (for new photos downloaded during shooting) or “D” (for ex-  
isting pictures downloaded during playback) followed by the date,  
an underscore, and a 3-digit folder number. A new folder is created  
each time you launch the Wireless Mobile Utility and either cap-  
ture new photos or download existing pictures. To view pictures in  
other folders, tap the folder icon at the top of the display and tap a  
folder to display its contents.  
On the smart device, the path to folders created for new photos  
downloaded during shooting is “/sdcard/Nikon_WU/Capture, while  
the path to those created for existing pictures downloaded during  
playback is/sdcard/Nikon_WU/Card.  
A
14  
Downloading Existing Pictures  
Download pictures from the camera memory card.  
Tap View photos.  
1
D5300: If the camera contains pictures currently selected  
for transmission to the smart device, a confirmation dialog  
will be displayed. Tap OK to begin download.  
Tap Pictures on camera.  
Tap Pictures on camera to view the pictures on the camera.  
2
A
15  
 
Select pictures for download.  
3
Tap a thumbnail to display the picture  
full frame. You can then swipe left or  
right to display the desired picture and  
tap the check mark to select or deselect.  
Press the back button on the smart de-  
vice to return to the thumbnail list.  
Alternatively, you can select multiple  
pictures by touching and holding  
a
thumbnail until check boxes are dis-  
played at the top right corner of each  
picture and then tapping thumbnails  
to select or deselect. You can also tap  
Select all in the smart device menu to  
select all images or Deselect all to dese-  
lect all images.  
AꢀFolders  
To select all images in a folder, tap the folder icon at the top of the  
display and then touch and hold the folder in the folder list.  
A
16  
Tap Download.  
4
If only one picture is selected, you will be  
prompted to choose the size at which  
the picture will be copied to the smart  
q
w
device. Tap  
(Download at [size]) to  
q
download the picture at the size selected for Image size in  
the Settings menu (page 24), or (Download at selected  
w
size) to choose a size before download (page 24).  
If multiple pictures are selected, a confirma-  
tion dialog will be displayed; tap Down-  
load to download the pictures at the  
size selected for Image size in the Set-  
tings menu (page 24).  
AꢀImageꢀSize  
Regardless of the size selected, pictures may sometimes be down-  
loaded at their original size.  
AꢀLocationꢀData  
The options shown at right will be displayed if  
Settings > Embed location data > Pictures  
on camera is enabled (page 24).  
DꢀDroppedꢀConnections  
If the wireless connection is lost while a picture is being download-  
ed, the picture will not be saved to the smart device (connection  
loss may occur if, for example, the camera turns off during down-  
load). Any pictures downloaded before the connection was inter-  
rupted are unaffected.  
A
17  
Sharing Pictures  
Before sharing pictures, connect to a network with Internet ac-  
cess.  
zzSharing Pictures One at a Time  
Display the smart device menu.  
1
Display a picture full-frame and tap the  
menu button on the smart device to  
view menu options.  
Tap Share.  
2
Tap Share and choose from a list of  
picture-sharing apps and functions (the  
specific contents of the list vary from de-  
vice to device).  
A
18  
 
zzSharing Multiple Picture  
Display check boxes.  
1
In the thumbnail list, touch and hold any  
of the pictures you want to share until a  
check mark is displayed in the top right  
corner and check boxes appear on the  
remaining images.  
Select pictures.  
2
Tap thumbnails to select or deselect.  
You can also tap Select all in the smart  
device menu to select all images or De-  
select all to deselect all images.  
Tap Share.  
3
Tap Share and choose from a list of  
picture-sharing apps and functions (the  
specific contents of the list vary from de-  
vice to device).  
A
19  
AꢀSharingꢀFolders  
To share all pictures in a folder, tap the folder  
icon at the top of the display to view folders,  
then touch and hold a folder to select all the  
pictures it contains. Selected pictures are in-  
dicated by check marks and can be shared by  
tapping Share as described in Step 3.  
A
20  
Deleting Pictures  
Downloaded pictures can be deleted from the smart device one  
at a time or in groups. The Wireless Mobile Utility can not be  
used to delete pictures from the camera memory card.  
zzDeleting Pictures One at a Time  
Display the smart device menu.  
1
Display a picture full-frame and tap the  
menu button on the smart device to  
view menu options.  
Tap Delete.  
Tap Delete.  
2
A confirmation dialog will be displayed;  
tap Yes.  
A
21  
zzDeleting Multiple Pictures  
Display check boxes.  
1
In the thumbnail list, touch and hold any  
of the pictures you want to delete until a  
check mark is displayed in the top right  
corner and check boxes appear on the  
remaining images.  
Select pictures.  
2
Tap thumbnails to select or deselect.  
You can also tap Select all in the smart  
device menu to select all images or De-  
select all to deselect all images.  
Tap Delete.  
A confirmation dialog will be displayed;  
3
tap Yes.  
A
22  
AꢀDeletingꢀFolders  
To delete all pictures in a folder, tap the folder  
icon at the top of the display to view folders,  
then touch and hold a folder to select all the  
pictures it contains. Selected pictures are in-  
dicated by check marks and can be deleted by  
tapping Delete as described in Step 3.  
A
23  
WirelessꢀMobileꢀUtilityꢀOptions  
To access the options listed below, tap the  
c icon at the top right corner of the display  
or use the smart device menu in the Wireless  
Mobile Utility home display.  
Settings  
Option  
Description  
Choose whether to synchronize the camera clock with  
the smart device.  
Synchronize clock  
Remote photography will end automatically when the  
camera or smart device battery reaches the selected level.  
Battery options  
Thumbnails  
Choose the size of the thumbnails in the playback display.  
Choose whether to embed smart device location data in  
Embed location pictures not already containing location data provided  
data  
by the camera. Location data will not be embedded if  
the smart device is unable to acquire its current location.  
When downloading multiple images, select Recom-  
mended size or VGA to copy images at sizes approximate-  
ly equivalent to 1920 × 1080 or 640 × 480, respectively.  
Image size  
If ON is selected, the Wireless Mobile Utility will launch  
App auto launch automatically when the smart device detects a signal  
from the camera.  
A
24  
   
Option  
Description  
Adjust network settings for the wireless mobile adapter.  
Wireless Mobile Note that the Auto power-off delay and Advanced settings  
Adapter settings > WPS PIN/WPS mode options are not available with cam-  
eras featuring built-in Wi-Fi.  
Choose an SSID for the wireless mobile adapter. The  
SSID  
smart device displays the SSID when you connect to  
the network manually.  
Authentication/ Choose the authentication method used for connection  
encryption  
Password  
Channel  
to the network.  
Enter a password. The password type is selected using  
Advanced settings > Password entry: choose ASCII for an  
8- to 63-character alphanumeric password, HEX for a 64-  
digit hexadecimal password.  
Choose the wireless channel used by the network.  
Auto power-off Choose the delay before the wireless mobile adapter  
delay  
enters sleep when there is no wireless connection.  
WPS PIN: Set the wireless mobile adapter WPS PIN.  
WPS mode: Select the adapter WPS mode.  
Password entry: Choose the password type.  
Sub-net mask: Enter a subnet mask.  
DHCP server IP address: Enter the wireless mobile adapt-  
er IP address.  
Advanced  
settings  
DHCP client IP address: Enter the smart device IP address.  
Current settings View current wireless mobile adapter settings.  
Format settings Tap Yes to restore default settings.  
Choose the language in which the user interface for the  
Wireless Mobile Utility is displayed.  
Language  
A
25  
Info  
Option  
Description  
Camera  
The name of the camera currently connected.  
View information about the wireless connection. The  
serial number and firmware version are displayed  
only if the camera is connected via the wireless mo-  
bile adapter.  
Wireless Mobile  
Adapter  
Linkꢀspeed  
View the transmission rate.  
Serialꢀnumber  
View the product serial number.  
Firmwareꢀversion View the current firmware version.  
Select About to view Wireless Mobile Utility ver-  
sion information, Check for updates to connect to  
the Google Play service and check for updates, or  
License Terms and Conditions to view the terms of use  
for this application.  
App  
Exit  
Exit the Wireless Mobile Utility.  
A
26  
 
D3200, COOLPIX A  
B
This section describes the options available when the Wireless  
Mobile Utility and an optional wireless mobile adapter are used  
to connect to D3200 and COOLPIX A cameras.  
Features  
Use the Wireless Mobile Utility to:  
Take pictures remotely (031):Tap the shut-  
ter icon in the Wireless Mobile Utility to  
take pictures and download them to  
the smart device.  
Download pictures as they are taken (034):  
Take pictures with the camera and save  
them to the smart device.  
View pictures (036):View the pictures stored on the smart device or  
the camera memory card.  
Download pictures (040): Download existing pictures from the cam-  
era memory card.  
Share pictures (043): Share pictures via e-mail or upload pictures to  
photo-sharing sites.  
For information on inserting the adapter, see page 29.  
B
27  
 
Notices  
• No part of this manual may be reproduced, transmitted, tran-  
scribed, stored in a retrieval system, or translated into any lan-  
guage in any form without Nikon’s prior written permission.  
• Nikon reserves the right to change the specifications of the hard-  
ware and software described in this manual at any time and  
without prior notice. Nikon will not be held liable for damages  
that may result from any mistakes that this manual may contain.  
SystemꢀRequirements  
Before installing the Wireless Mobile Utility, confirm that your  
smart device meets the following system requirements:  
Smartphone: Android 2.3 series, Android 4.x series  
Tablet: Android 4.x series  
OS  
WirelessꢀLAN  
11b/g/n  
Screenꢀresolution 800 × 480 pixels (WVGA) or higher  
DꢀUsingꢀThisꢀApplicationꢀforꢀtheꢀFirstꢀTime  
You must accept the terms and conditions of the End User License  
Agreement (EULA) before connecting.  
B
28  
InstallingꢀtheꢀApp  
Locate the app on Google Play.  
Connect to Google Play on the smart device and search for  
“Wireless Mobile Utility.  
1
Install the app.  
Install the Wireless Mobile Utility.  
2
EstablishingꢀaꢀWirelessꢀConnection  
Connect the wireless mobile adapter.  
1
Attach the wireless mobile adapter to the camera and turn  
the camera on. See the manual supplied with the wireless  
mobile adapter for details.  
Ready the smart device.  
Select Wi-Fi settings > WPS button connection. The smart  
2
device will wait for a signal from the camera.  
Press the WPS button.  
3
Press the WPS button on the wireless mobile adapter for  
about 5 s until the LED on the wireless mobile adapter flash-  
es red and green.  
Launch the Wireless Mobile Utility.  
4
When a connection is established, the LED on the wireless  
mobile adapter will glow green and the main dialog for the  
Wireless Mobile Utility will be displayed on the smart de-  
vice. For information on taking pictures, see page 31. For in-  
formation on viewing pictures, see page 36.  
B
29  
 
AꢀWPS  
WPS (Wi-Fi Protected Setup) is a standard designed to make it easy  
to establish a secure wireless network. For information on the steps  
involved and the length of time the smart device will wait for a con-  
nection, see the documentation supplied with the smart device.  
AꢀManualꢀWirelessꢀConnections  
1ꢀ Display Wi-Fi settings for the smart device.  
2ꢀ Select the appropriate SSID (the default SSID begins with  
“Nikon”). The LED will light green when a connection is estab-  
lished.  
AꢀConnectionꢀStatus  
Connection status is shown by an icon in the  
home display:  
: Connection established.  
: No connection. Tap the icon to open the  
smart device Wi-Fi settings menu and check  
Wi-Fi settings.  
DꢀTheꢀWirelessꢀMobileꢀAdapter  
While the adapter is inserted, the camera exposure meters will not  
turn off; monitor the camera battery level to ensure that the cam-  
era does not power off unexpectedly. In addition, some camera  
menu items may be grayed out and unavailable and the camera  
can not be used for playback or live view. Movie recording can  
not be used.  
B
30  
TakingꢀPhotos  
Take pictures remotely from the smart device, or take pictures  
with the camera and save them to the smart device.  
Remote Photography  
Follow the steps below to take photos from the smart device.  
Tap Take photos.  
The camera viewfinder will go dark and the smart device  
will display the view through the camera lens.  
1
Tap the shutter icon.  
2
Tap the shutter icon. If the camera is able  
to focus, the shutter will be released  
after you remove your finger from the  
icon; the resulting photo is first saved  
to the camera memory card and then  
downloaded to the smart device. There  
is no need to point the smart device at  
the wireless mobile adapter.  
B
31  
   
DꢀRemoteꢀPhotography  
Remote photography ends automatically when the battery in the  
camera or smart device runs low. Note that using remote pho-  
tography for an extended period may cause the camera’s internal  
temperature to rise; if necessary, remote photography will end au-  
tomatically to minimize damage to camera circuits.  
The smart device can not be used to adjust camera settings; use  
camera controls to adjust settings before starting Step 1. Regard-  
less of the release mode selected with the camera, only one picture  
will be taken each time you tap the shutter icon. Note that the  
display may not update smoothly depending on the device and  
network conditions.  
In normal- and wide-area AF AF-area modes, the camera will focus  
on the subject in the focus area selected with the camera; if subject-  
tracking AF is selected, the camera will focus using wide-area AF.  
B
32  
AꢀTheꢀRemoteꢀPhotographyꢀDisplay  
Mode selection: Tap  
to select photo  
capture mode (page 34).  
Settings: The following photography-  
related options can be accessed from  
the smart device menu.  
Remote shooting auto download:  
Choose whether to download pictures  
to the smart device after shooting (re-  
mote shooting mode only).  
Self-timer: If ON is selected, the cam-  
era shutter will be released 2 s after  
you tap the shutter icon. The timer  
turns off automatically after the shut-  
ter is released.  
Self-timer icon: Displayed when the self-  
timer is on.  
Camera settings: Shutter speed, aperture,  
etc. Not displayed when device is in  
landscape orientation.  
Thumbnail area: Downloaded pictures.  
B
33  
Downloading Photos as They Are Taken  
Take photos with the camera and save them to the smart device.  
Tap Take photos.  
1
Tap  
.
2
The dialog shown below at right will be displayed (page 35).  
B
34  
 
Take photos.  
3
Frame photos in the camera viewfinder and shoot. Photos  
are downloaded to the smart device after being saved to  
the camera memory card.  
AꢀTheꢀPhotoꢀCaptureꢀDisplay  
The photo capture display is shown below.  
Mode selection: Tap  
to select remote  
shooting mode (page 31).  
Thumbnail area: Downloaded pictures.  
B
35  
 
ViewingꢀPhotos  
Tap View photos to view the pictures stored on the smart de-  
vice. You can also view the pictures on the camera memory card  
and download selected images to the smart device.  
Viewing Pictures  
View the pictures in camera memory or on the smart device.  
Tap View photos.  
1
B
36  
   
Choose a device.  
2
Tap Pictures on camera to view the pictures on the camera  
memory card, Pictures on smart device to view the pictures  
stored on the smart device. The pictures will be displayed  
as smallthumbnailimages (in some cases, a folder list may  
be displayed; tap a folder to view the pictures it contains).  
View pictures.  
3
Tap a thumbnail to display the picture  
full frame. You can then swipe left or  
right to view additional pictures.  
B
37  
AꢀTheꢀFull-FrameꢀDisplay  
The full-frame display is shown below.  
Return to shooting  
mode (available only  
if display was accessed  
by tapping thumbnail  
in shooting display)  
Tap picture to hide or  
view icons  
Zoom in or out  
DꢀMovies  
Movies can not be viewed using the Wireless Mobile Utility, but  
movies can be played back by tapping the movie or playback icon  
in the thumbnail list to display a list of movie apps and choosing  
an app from the list.  
B
38  
AꢀFolders  
Downloaded pictures are stored in folders with names consisting  
of “C” (for new photos downloaded during shooting) or “D” (for ex-  
isting pictures downloaded during playback) followed by the date,  
an underscore, and a 3-digit folder number. A new folder is created  
each time you launch the Wireless Mobile Utility and either cap-  
ture new photos or download existing pictures. To view pictures in  
other folders, tap the folder icon at the top of the display and tap a  
folder to display its contents.  
On the smart device, the path to folders created for new photos  
downloaded during shooting is “/sdcard/Nikon_WU/Capture, while  
the path to those created for existing pictures downloaded during  
playback is/sdcard/Nikon_WU/Card.  
B
39  
Downloading Existing Pictures  
Download pictures from the camera memory card.  
Tap View photos.  
1
Tap Pictures on camera.  
Tap Pictures on camera to view the pictures on the camera.  
2
B
40  
 
Select pictures for download.  
3
Tap a thumbnail to display the picture  
full frame. You can then swipe left or  
right to display the desired picture and  
tap the check mark to select or deselect.  
Press the back button on the smart de-  
vice to return to the thumbnail list.  
Alternatively, you can select multiple  
pictures by touching and holding  
a
thumbnail until check boxes are dis-  
played at the top right corner of each  
picture and then tapping thumbnails  
to select or deselect. You can also tap  
Select all in the smart device menu to  
select all images or Deselect all to dese-  
lect all images.  
AꢀFolders  
To select all images in a folder, tap the folder icon at the top of the  
display and then touch and hold the folder in the folder list.  
B
41  
Tap Download.  
4
If only one picture is selected, you will be  
prompted to choose the size at which  
the picture will be copied to the smart  
q
w
device. Tap  
(Download at [size]) to  
q
download the picture at the size selected for Image size in  
the Settings menu (page 49), or (Download at selected  
w
size) to choose a size before download (page 49).  
If multiple pictures are selected, a confirma-  
tion dialog will be displayed; tap Down-  
load to download the pictures at the  
size selected for Image size in the Set-  
tings menu (page 49).  
AꢀImageꢀSize  
Regardless of the size selected, pictures may sometimes be down-  
loaded at their original size.  
AꢀLocationꢀData  
The options shown at right will be displayed if  
Settings > Embed location data > Pictures  
on camera is enabled (page 49).  
DꢀDroppedꢀConnections  
If the wireless connection is lost while a picture is being download-  
ed, the picture will not be saved to the smart device (connection  
loss may occur if, for example, the camera turns off during down-  
load). Any pictures downloaded before the connection was inter-  
rupted are unaffected.  
B
42  
Sharing Pictures  
Before sharing pictures, connect to a network with Internet ac-  
cess.  
zzSharing Pictures One at a Time  
Display the smart device menu.  
1
Display a picture full-frame and tap the  
menu button on the smart device to  
view menu options.  
Tap Share.  
2
Tap Share and choose from a list of  
picture-sharing apps and functions (the  
specific contents of the list vary from de-  
vice to device).  
B
43  
 
zzSharing Multiple Pictures  
Display check boxes.  
1
In the thumbnail list, touch and hold any  
of the pictures you want to share until a  
check mark is displayed in the top right  
corner and check boxes appear on the  
remaining images.  
Select pictures.  
2
Tap thumbnails to select or deselect.  
You can also tap Select all in the smart  
device menu to select all images or De-  
select all to deselect all images.  
Tap Share.  
3
Tap Share and choose from a list of  
picture-sharing apps and functions (the  
specific contents of the list vary from de-  
vice to device).  
B
44  
AꢀSharingꢀFolders  
To share all pictures in a folder, tap the folder  
icon at the top of the display to view folders,  
then touch and hold a folder to select all the  
pictures it contains. Selected pictures are in-  
dicated by check marks and can be shared by  
tapping Share as described in Step 3.  
B
45  
Deleting Pictures  
Downloaded pictures can be deleted from the smart device one  
at a time or in groups. The Wireless Mobile Utility can not be  
used to delete pictures from the camera memory card.  
zzDeleting Pictures One at a Time  
Display the smart device menu.  
1
Display a picture full-frame and tap the  
menu button on the smart device to  
view menu options.  
Tap Delete.  
Tap Delete.  
2
A confirmation dialog will be displayed;  
tap Yes.  
B
46  
zzDeleting Multiple Pictures  
Display check boxes.  
1
In the thumbnail list, touch and hold any  
of the pictures you want to delete until a  
check mark is displayed in the top right  
corner and check boxes appear on the  
remaining images.  
Select pictures.  
2
Tap thumbnails to select or deselect.  
You can also tap Select all in the smart  
device menu to select all images or De-  
select all to deselect all images.  
Tap Delete.  
A confirmation dialog will be displayed;  
3
tap Yes.  
B
47  
AꢀDeletingꢀFolders  
To delete all pictures in a folder, tap the folder  
icon at the top of the display to view folders,  
then touch and hold a folder to select all the  
pictures it contains. Selected pictures are in-  
dicated by check marks and can be deleted by  
tapping Delete as described in Step 3.  
B
48  
WirelessꢀMobileꢀUtilityꢀOptions  
To access the options listed below, tap the  
c icon at the top right corner of the display  
or use the smart device menu in the Wireless  
Mobile Utility home display.  
Settings  
Option  
Description  
Choose whether to synchronize the camera clock with  
the smart device.  
Synchronize clock  
Remote photography will end automatically when the  
camera or smart device battery reaches the selected level.  
Battery options  
Thumbnails  
Choose the size of the thumbnails in the playback display.  
Choose whether to embed smart device location data in  
Embed location pictures not already containing location data provided  
data  
by the camera. Location data will not be embedded if  
the smart device is unable to acquire its current location.  
When downloading multiple images, select Recom-  
mended size or VGA to copy images at sizes approximate-  
ly equivalent to 1920 × 1080 or 640 × 480, respectively.  
Image size  
If ON is selected, the Wireless Mobile Utility will launch  
App auto launch automatically when the smart device detects a signal  
from the wireless mobile adapter.  
B
49  
   
Option  
Description  
Wireless Mobile  
Adapter settings  
Adjust network settings for the wireless mobile adapter.  
Choose an SSID for the wireless mobile adapter. The  
smart device displays the SSID when you connect to  
the network manually.  
SSID  
Authentication/ Choose the authentication method used for connection  
encryption  
Password  
Channel  
to the network.  
Enter a password. The password type is selected using  
Advanced settings > Password entry: choose ASCII for an  
8- to 63-character alphanumeric password, HEX for a  
64-digit hexadecimal password.  
Choose the wireless channel used by the network.  
Autoꢀpower-offꢀ Choose the delay before the wireless mobile adapter  
delay  
enters sleep when there is no wireless connection.  
WPS PIN: Set the wireless mobile adapter WPS PIN.  
WPS mode: Select the adapter WPS mode.  
Password entry: Choose the password type.  
Sub-net mask: Enter a subnet mask.  
DHCP server IP address: Enter the wireless mobile adapt-  
er IP address.  
Advancedꢀ  
settings  
DHCP client IP address: Enter the smart device IP address.  
Currentꢀsettings View current wireless mobile adapter settings.  
Formatꢀsettings Tap Yes to restore default settings.  
Choose the language in which the user interface for the  
Wireless Mobile Utility is displayed.  
Language  
B
50  
Info  
Option  
Description  
Camera  
The name of the camera currently connected.  
Wireless Mobile  
Adapter  
View information about the wireless mobile adapter.  
Linkꢀspeed  
View the transmission rate.  
Serialꢀnumber  
View the product serial number.  
Firmwareꢀversion View the current firmware version.  
Select About to view Wireless Mobile Utility ver-  
sion information, Check for updates to connect to  
the Google Play service and check for updates, or  
License Terms and Conditions to view the terms of use  
for this application.  
App  
Exit  
Exit the Wireless Mobile Utility.  
B
51  
 
Nikon 1: V2, J3, S1, AW1  
C
This section describes the options available when the Wireless  
Mobile Utility and an optional wireless mobile adapter are used  
to connect to Nikon 1 V2, J3, S1 and AW1 cameras.  
Features  
Use the Wireless Mobile Utility to:  
Take pictures remotely (056):Tap the shut-  
ter icon in the Wireless Mobile Utility to  
take pictures and download them to  
the smart device.  
View pictures (059):View the pictures stored on the smart device or  
the camera memory card.  
Download pictures (063): Download existing pictures from the cam-  
era memory card.  
Share pictures (066): Share pictures via e-mail or upload pictures to  
photo-sharing sites.  
For information on inserting the adapter, see page 54.  
C
52  
 
Notices  
• No part of this manual may be reproduced, transmitted, tran-  
scribed, stored in a retrieval system, or translated into any lan-  
guage in any form without Nikon’s prior written permission.  
• Nikon reserves the right to change the specifications of the hard-  
ware and software described in this manual at any time and  
without prior notice. Nikon will not be held liable for damages  
that may result from any mistakes that this manual may contain.  
SystemꢀRequirements  
Before installing the Wireless Mobile Utility, confirm that your  
smart device meets the following system requirements:  
Smartphone: Android 2.3 series, Android 4.x series  
Tablet: Android 4.x series  
OS  
WirelessꢀLAN  
11b/g/n  
Screenꢀresolution 800 × 480 pixels (WVGA) or higher  
DꢀUsingꢀThisꢀApplicationꢀforꢀtheꢀFirstꢀTime  
You must accept the terms and conditions of the End User License  
Agreement (EULA) before connecting.  
C
53  
InstallingꢀtheꢀApp  
Locate the app on Google Play.  
Connect to Google Play on the smart device and search for  
“Wireless Mobile Utility.  
1
Install the app.  
Install the Wireless Mobile Utility.  
2
EstablishingꢀaꢀWirelessꢀConnection  
Connect the wireless mobile adapter.  
1
Attach the wireless mobile adapter to the camera and turn  
the camera on. See the manual supplied with the wireless  
mobile adapter for details.  
Ready the smart device.  
Select Wi-Fi settings > WPS button connection. The smart  
2
device will wait for a signal from the camera.  
Press the WPS button.  
3
Press the WPS button on the wireless mobile adapter for  
about 5 s until the LED on the wireless mobile adapter flash-  
es red and green.  
Launch the Wireless Mobile Utility.  
4
When a connection is established, the LED on the wireless  
mobile adapter will glow green and the main dialog for the  
Wireless Mobile Utility will be displayed on the smart de-  
vice. For information on taking pictures, see page 56. For in-  
formation on viewing pictures, see page 59.  
C
54  
 
AꢀWPS  
WPS (Wi-Fi Protected Setup) is a standard designed to make it easy  
to establish a secure wireless network. For information on the steps  
involved and the length of time the smart device will wait for a con-  
nection, see the documentation supplied with the smart device.  
AꢀManualꢀWirelessꢀConnections  
1ꢀ Display Wi-Fi settings for the smart device.  
2ꢀ Select the appropriate SSID (the default SSID begins with  
“Nikon”). The LED will light green when a connection is estab-  
lished.  
AꢀConnectionꢀStatus  
Connection status is shown by an icon in the  
home display:  
: Connection established.  
: No connection. Tap the icon to open the  
smart device Wi-Fi settings menu and check  
Wi-Fi settings.  
DꢀTheꢀWirelessꢀMobileꢀAdapter  
While the adapter is inserted, the camera exposure meters will not  
turn off; monitor the camera battery level to ensure that the cam-  
era does not power off unexpectedly. In addition, some camera  
menu items may be grayed out and unavailable and the camera  
can not be used for playback or live view. Movie recording can  
not be used.  
C
55  
TakingꢀPhotos  
Follow the steps below to take photos from the smart device.  
Tap Take photos.  
The camera viewfinder will go dark and the smart device  
will display the view through the camera lens.  
1
Tap the shutter icon.  
2
The shutter will be released after you  
remove your finger from the icon and  
the camera focuses (note that no photo  
will be taken if the camera is unable to  
focus); the resulting photo is first saved  
to the camera memory card and then  
downloaded to the smart device. There  
is no need to point the smart device at  
the wireless mobile adapter.  
C
56  
 
DꢀRemoteꢀPhotography  
Remote photography ends automatically when the battery in the  
camera or smart device runs low. Note that using remote pho-  
tography for an extended period may cause the camera’s internal  
temperature to rise; if necessary, remote photography will end au-  
tomatically to minimize damage to camera circuits.  
The smart device can not be used to adjust camera settings; use  
camera controls to adjust settings before starting Step 1. Regard-  
less of the release mode selected with the camera, only one picture  
will be taken each time you tap the shutter icon. Note that the  
display may not update smoothly depending on the device and  
network conditions.  
Regardless of the settings selected with the camera, pictures will be  
taken in mode P (programmed auto) using single-servo autofocus  
(AF-S) and auto-area AF. Face-priority AF is disabled and the focus  
point is not displayed.  
C
57  
AꢀTheꢀRemoteꢀPhotographyꢀDisplay  
Settings: The following photography-  
related options can be accessed from  
the smart device menu.  
Remote shooting auto download:  
Choose whether to download pictures  
to the smart device after shooting.  
Self-timer: If ON is selected, the cam-  
era shutter will be released 2 s after  
you tap the shutter icon. The timer  
turns off automatically after the shut-  
ter is released.  
Self-timer icon: Displayed when the self-  
timer is on.  
Camera settings: Shutter speed, aperture,  
etc. Not displayed when device is in  
landscape orientation.  
Thumbnail area: Downloaded pictures.  
C
58  
ViewingꢀPhotos  
Tap View photos to view the pictures stored on the smart de-  
vice. You can also view the pictures on the camera memory card  
and download selected images to the smart device.  
Viewing Pictures  
View the pictures in camera memory or on the smart device.  
Tap View photos.  
1
C
59  
   
Choose a device.  
2
Tap Pictures on camera to view the pictures on the camera  
memory card, Pictures on smart device to view the pictures  
stored on the smart device. The pictures will be displayed  
as smallthumbnailimages (in some cases, a folder list may  
be displayed; tap a folder to view the pictures it contains).  
View pictures.  
3
Tap a thumbnail to display the picture  
full frame. You can then swipe left or  
right to view additional pictures.  
C
60  
AꢀTheꢀFull-FrameꢀDisplay  
The full-frame display is shown below.  
Return to shooting  
mode (available only  
if display was accessed  
by tapping thumbnail  
in shooting display)  
Tap picture to hide or  
view icons  
Zoom in or out  
DꢀMovies  
Movies can not be viewed using the Wireless Mobile Utility, but  
movies can be played back by tapping the movie or playback icon  
in the thumbnail list to display a list of movie apps and choosing  
an app from the list.  
C
61  
AꢀFolders  
Downloaded pictures are stored in folders with names consisting  
of “C” (for new photos downloaded during shooting) or “D” (for ex-  
isting pictures downloaded during playback) followed by the date,  
an underscore, and a 3-digit folder number. A new folder is created  
each time you launch the Wireless Mobile Utility and either cap-  
ture new photos or download existing pictures. To view pictures in  
other folders, tap the folder icon at the top of the display and tap a  
folder to display its contents.  
On the smart device, the path to folders created for new photos  
downloaded during shooting is “/sdcard/Nikon_WU/Capture, while  
the path to those created for existing pictures downloaded during  
playback is/sdcard/Nikon_WU/Card.  
C
62  
Downloading Existing Pictures  
Download pictures from the camera memory card.  
Tap View photos.  
1
Tap Pictures on camera.  
Tap Pictures on camera to view the pictures on the camera.  
2
C
63  
 
Select pictures for download.  
3
Tap a thumbnail to display the picture  
full frame. You can then swipe left or  
right to display the desired picture and  
tap the check mark to select or deselect.  
Press the back button on the smart de-  
vice to return to the thumbnail list.  
Alternatively, you can select multiple  
pictures by touching and holding  
a
thumbnail until check boxes are dis-  
played at the top right corner of each  
picture and then tapping thumbnails  
to select or deselect. You can also tap  
Select all in the smart device menu to  
select all images or Deselect all to dese-  
lect all images.  
AꢀFolders  
To select all images in a folder, tap the folder icon at the top of the  
display and then touch and hold the folder in the folder list.  
C
64  
Tap Download.  
4
If only one picture is selected, you will be  
prompted to choose the size at which  
the picture will be copied to the smart  
q
w
device. Tap  
(Download at [size]) to  
q
download the picture at the size selected for Image size in  
the Settings menu (page 72), or (Download at selected  
w
size) to choose a size before download (page 72).  
If multiple pictures are selected, a confirma-  
tion dialog will be displayed; tap Down-  
load to download the pictures at the  
size selected for Image size in the Set-  
tings menu (page 72).  
AꢀImageꢀSize  
Regardless of the size selected, pictures may sometimes be down-  
loaded at their original size.  
AꢀLocationꢀData  
The options shown at right will be displayed if  
Settings > Embed location data > Pictures  
on camera is enabled (page 72).  
DꢀDroppedꢀConnections  
If the wireless connection is lost while a picture is being download-  
ed, the picture will not be saved to the smart device (connection  
loss may occur if, for example, the camera turns off during down-  
load). Any pictures downloaded before the connection was inter-  
rupted are unaffected.  
C
65  
Sharing Pictures  
Before sharing pictures, connect to a network with Internet ac-  
cess.  
zzSharing Pictures One at a Time  
Display the smart device menu.  
1
Display a picture full-frame and tap the  
menu button on the smart device to  
view menu options.  
Tap Share.  
2
Tap Share and choose from a list of  
picture-sharing apps and functions (the  
specific contents of the list vary from de-  
vice to device).  
C
66  
 
zzSharing Multiple Pictures  
Display check boxes.  
1
In the thumbnail list, touch and hold any  
of the pictures you want to share until a  
check mark is displayed in the top right  
corner and check boxes appear on the  
remaining images.  
Select pictures.  
2
Tap thumbnails to select or deselect.  
You can also tap Select all in the smart  
device menu to select all images or De-  
select all to deselect all images.  
Tap Share.  
3
Tap Share and choose from a list of  
picture-sharing apps and functions (the  
specific contents of the list vary from de-  
vice to device).  
C
67  
AꢀSharingꢀFolders  
To share all pictures in a folder, tap the folder  
icon at the top of the display to view folders,  
then touch and hold a folder to select all the  
pictures it contains. Selected pictures are in-  
dicated by check marks and can be shared by  
tapping Share as described in Step 3.  
C
68  
Deleting Pictures  
Downloaded pictures can be deleted from the smart device one  
at a time or in groups. The Wireless Mobile Utility can not be  
used to delete pictures from the camera memory card.  
zzDeleting Pictures One at a Time  
Display the smart device menu.  
1
Display a picture full-frame and tap the  
menu button on the smart device to  
view menu options.  
Tap Delete.  
Tap Delete.  
2
A confirmation dialog will be displayed;  
tap Yes.  
C
69  
zzDeleting Multiple Pictures  
Display check boxes.  
1
In the thumbnail list, touch and hold any  
of the pictures you want to delete until a  
check mark is displayed in the top right  
corner and check boxes appear on the  
remaining images.  
Select pictures.  
2
Tap thumbnails to select or deselect.  
You can also tap Select all in the smart  
device menu to select all images or De-  
select all to deselect all images.  
Tap Delete.  
A confirmation dialog will be displayed;  
3
tap Yes.  
C
70  
AꢀDeletingꢀFolders  
To delete all pictures in a folder, tap the folder  
icon at the top of the display to view folders,  
then touch and hold a folder to select all the  
pictures it contains. Selected pictures are in-  
dicated by check marks and can be deleted by  
tapping Delete as described in Step 3.  
C
71  
WirelessꢀMobileꢀUtilityꢀOptions  
To access the options listed below, tap the  
c icon at the top right corner of the display  
or use the smart device menu in the Wireless  
Mobile Utility home display.  
Settings  
Option  
Description  
Choose whether to synchronize the camera clock with  
the smart device.  
Synchronize clock  
Remote photography will end automatically when the  
camera or smart device battery reaches the selected level.  
Battery options  
Thumbnails  
Choose the size of the thumbnails in the playback display.  
Choose whether to embed smart device location data in  
Embed location pictures not already containing location data provided  
data  
by the camera. Location data will not be embedded if  
the smart device is unable to acquire its current location.  
When downloading multiple images, select Recom-  
mended size or VGA to copy images at sizes approximate-  
ly equivalent to 1920 × 1080 or 640 × 480, respectively.  
Image size  
If ON is selected, the Wireless Mobile Utility will launch  
App auto launch automatically when the smart device detects a signal  
from the wireless mobile adapter.  
C
72  
   
Option  
Description  
Wireless Mobile  
Adapter settings  
Adjust network settings for the wireless mobile adapter.  
Choose an SSID for the wireless mobile adapter. The  
smart device displays the SSID when you connect to  
the network manually.  
SSID  
Authentication/ Choose the authentication method used for connection  
encryption  
Password  
Channel  
to the network.  
Enter a password. The password type is selected using  
Advanced settings > Password entry: choose ASCII for an  
8- to 63-character alphanumeric password, HEX for a  
64-digit hexadecimal password.  
Choose the wireless channel used by the network.  
Autoꢀpower-offꢀ Choose the delay before the wireless mobile adapter  
delay  
enters sleep when there is no wireless connection.  
WPS PIN: Set the wireless mobile adapter WPS PIN.  
WPS mode: Select the adapter WPS mode.  
Password entry: Choose the password type.  
Sub-net mask: Enter a subnet mask.  
DHCP server IP address: Enter the wireless mobile adapt-  
er IP address.  
Advancedꢀ  
settings  
DHCP client IP address: Enter the smart device IP address.  
Currentꢀsettings View current wireless mobile adapter settings.  
Formatꢀsettings Tap Yes to restore default settings.  
Choose the language in which the user interface for the  
Wireless Mobile Utility is displayed.  
Language  
C
73  
Info  
Option  
Description  
Camera  
The name of the camera currently connected.  
Wireless Mobile  
Adapter  
View information about the wireless mobile adapter.  
Linkꢀspeed  
View the transmission rate.  
Serialꢀnumber  
View the product serial number.  
Firmwareꢀversion View the current firmware version.  
Select About to view Wireless Mobile Utility ver-  
sion information, Check for updates to connect to  
the Google Play service and check for updates, or  
License Terms and Conditions to view the terms of use  
for this application.  
App  
Exit  
Exit the Wireless Mobile Utility.  
C
74  
 
COOLPIX: P7800, P520, P330, S9500, S6600,  
S6500, S5200, AW110  
D
This section describes the options available when the Wireless  
Mobile Utility is used to connect to COOLPIX P7800, P520, P330,  
S9500, S6600, S6500, S5200, and AW110 cameras.  
Features  
Use the Wireless Mobile Utility to:  
Take pictures remotely (079):Tap the shut-  
ter icon in the Wireless Mobile Utility to  
take pictures and download them to  
the smart device.  
Download pictures as they are taken (082):  
Take pictures with a compatible cam-  
era and save them to the smart device.  
View pictures (084):View the pictures stored on the smart device or  
the camera memory card.  
Download pictures (088): Download existing pictures from the cam-  
era memory card.  
Share pictures (091): Share pictures via e-mail or upload pictures to  
photo-sharing sites.  
For information on establishing a connection, see page 77.  
D
75  
 
Notices  
• No part of this manual may be reproduced, transmitted, tran-  
scribed, stored in a retrieval system, or translated into any lan-  
guage in any form without Nikon’s prior written permission.  
• Nikon reserves the right to change the specifications of the hard-  
ware and software described in this manual at any time and  
without prior notice. Nikon will not be held liable for damages  
that may result from any mistakes that this manual may contain.  
SystemꢀRequirements  
Before installing the Wireless Mobile Utility, confirm that your  
smart device meets the following system requirements:  
Smartphone: Android 2.3 series, Android 4.x series  
Tablet: Android 4.x series  
OS  
WirelessꢀLAN  
11b/g/n  
Screenꢀresolution 800 × 480 pixels (WVGA) or higher  
DꢀUsingꢀThisꢀApplicationꢀforꢀtheꢀFirstꢀTime  
You must accept the terms and conditions of the End User License  
Agreement (EULA) before connecting.  
D
76  
InstallingꢀtheꢀApp  
Locate the app on Google Play.  
Connect to Google Play on the smart device and search for  
“Wireless Mobile Utility.  
1
Install the app.  
Install the Wireless Mobile Utility.  
2
EstablishingꢀaꢀWirelessꢀConnection  
The following applies only to cameras without built-in Wi-Fi. For  
information on cameras with built-in Wi-Fi, see the manual pro-  
vided with the camera.  
Connect the wireless mobile adapter.  
1
Attach the wireless mobile adapter to the camera and turn  
the camera on. See the manual supplied with the wireless  
mobile adapter for details.  
Ready the smart device.  
Select Wi-Fi settings > WPS button connection. The smart  
2
device will wait for a signal from the camera.  
Press the WPS button.  
3
Press the WPS button on the wireless mobile adapter for  
about 5 s until the LED on the wireless mobile adapter flash-  
es red and green.  
Launch the Wireless Mobile Utility.  
4
When a connection is established, the LED on the wireless  
mobile adapter will glow green and the main dialog for the  
Wireless Mobile Utility will be displayed on the smart de-  
vice. For information on taking pictures, see page 79. For in-  
formation on viewing pictures, see page 84.  
D
77  
 
AꢀWPS  
WPS (Wi-Fi Protected Setup) is a standard designed to make it easy  
to establish a secure wireless network. For information on the steps  
involved and the length of time the smart device will wait for a con-  
nection, see the documentation supplied with the smart device.  
AꢀManualꢀWirelessꢀConnections  
1ꢀ Display Wi-Fi settings for the smart device.  
2ꢀ Select the appropriate SSID (the default SSID begins with  
“Nikon”). If you are using a wireless mobile adapter, the LED will  
light green when a connection is established.  
AꢀConnectionꢀStatus  
Connection status is shown by an icon in the  
home display:  
: Connection established.  
: No connection. Tap the icon to open the  
smart device Wi-Fi settings menu and check  
Wi-Fi settings.  
DꢀTheꢀWirelessꢀMobileꢀAdapterꢀ(forꢀCamerasꢀWithoutꢀBuilt-inꢀWi-Fi)  
While the adapter is inserted, the camera exposure meters will not  
turn off; monitor the camera battery level to ensure that the cam-  
era does not power off unexpectedly. In addition, some camera  
menu items may be grayed out and unavailable and the camera  
can not be used for playback or live view. Movie recording can  
not be used.  
D
78  
TakingꢀPhotos  
Take pictures remotely from the smart device, or take pictures  
with the camera and save them to the smart device.  
Remote Photography  
Follow the steps below to take photos from the smart device.  
Tap Take photos.  
The camera viewfinder will go dark and the smart device  
will display the view through the camera lens.  
1
Tap the shutter icon.  
2
The shutter will be released after you re-  
move your finger from the icon and the  
camera focuses; the resulting photo is  
first saved to the camera memory card  
and then downloaded to the smart de-  
vice. There is no need to point the smart  
device at the camera.  
D
79  
   
DꢀRemoteꢀPhotography  
Remote photography ends automatically when the battery in the  
camera or smart device runs low. Note that using remote pho-  
tography for an extended period may cause the camera’s internal  
temperature to rise; if necessary, remote photography will end au-  
tomatically to minimize damage to camera circuits.  
The smart device can not be used to adjust camera settings; use  
camera controls to adjust settings before starting Step 1. Regard-  
less of the release mode selected with the camera, only one picture  
will be taken each time you tap the shutter icon. Note that the  
display may not update smoothly depending on the device and  
network conditions.  
Regardless of the settings selected with the camera, pictures will be  
taken in C (auto) mode using target finding autofocus. The focus  
point is not displayed.  
D
80  
AꢀTheꢀRemoteꢀPhotographyꢀDisplay  
Mode selection: Tap to select photo cap-  
ture mode (compatible cameras only;  
page 82).  
Settings: The following photography-  
related options can be accessed from  
the smart device menu:  
Remote shooting auto download:  
Choose whether to download pictures  
to the smart device after shooting (re-  
mote shooting mode only).  
Self-timer: If ON is selected, the cam-  
era shutter will be released 2 s after  
you tap the shutter icon. The timer  
turns off automatically after the shut-  
ter is released.  
Self-timer icon: Displayed when the self-  
timer is on.  
Camera settings: Shutter speed, aperture,  
etc. Not displayed when device is in  
landscape orientation.  
Optical zoom: Tap T to zoom in, W to zoom  
out.  
Thumbnail area: Downloaded pictures.  
D
81  
Downloading Photos as They Are Taken  
Take photos with any of the following cameras and save them to  
the smart device: S6600, S6500 (firmware version 1.1), or S5200  
(firmware version 1.1).  
Tap Take photos.  
1
Tap  
.
2
The dialog shown below at right will be displayed (page 83).  
D
82  
 
Take photos.  
3
Use the camera to frame and shoot photos. Photos are  
downloaded to the smart device after being saved to the  
camera memory card.  
AꢀTheꢀPhotoꢀCaptureꢀDisplay  
The photo capture display is shown below.  
Mode selection: Tap  
to select remote  
shooting mode (page 79).  
Thumbnail area: Downloaded pictures.  
D
83  
 
ViewingꢀPhotos  
Tap View photos to view the pictures stored on the smart de-  
vice. You can also view the pictures on the camera memory card  
and download selected images to the smart device.  
Viewing Pictures  
View the pictures in camera memory or on the smart device.  
Tap View photos.  
1
D
84  
 
Choose a device.  
2
Tap Pictures on camera to view the pictures on the camera  
memory card, Pictures on smart device to view the pictures  
stored on the smart device. The pictures will be displayed  
as smallthumbnailimages (in some cases, a folder list may  
be displayed; tap a folder to view the pictures it contains).  
View pictures.  
3
Tap a thumbnail to display the picture  
full frame. You can then swipe left or  
right to view additional pictures.  
D
85  
AꢀTheꢀFull-FrameꢀDisplay  
The full-frame display is shown below.  
Return to shooting  
mode (available only  
if display was accessed  
by tapping thumbnail  
in shooting display)  
Tap picture to hide or  
view icons  
Zoom in or out  
DꢀMovies  
Movies can not be viewed using the Wireless Mobile Utility, but  
movies can be played back by tapping the movie or playback icon  
in the thumbnail list to display a list of movie apps and choosing  
an app from the list.  
D
86  
AꢀFolders  
Downloaded pictures are stored in folders with names consisting  
of “C” (for new photos downloaded during shooting) or “D” (for ex-  
isting pictures downloaded during playback) followed by the date,  
an underscore, and a 3-digit folder number. A new folder is created  
each time you launch the Wireless Mobile Utility and either cap-  
ture new photos or download existing pictures. To view pictures in  
other folders, tap the folder icon at the top of the display and tap a  
folder to display its contents.  
On the smart device, the path to folders created for new photos  
downloaded during shooting is “/sdcard/Nikon_WU/Capture, while  
the path to those created for existing pictures downloaded during  
playback is/sdcard/Nikon_WU/Card.  
D
87  
Downloading Existing Pictures  
Download pictures from the camera memory card. Note that 3D  
images are downloaded as 2D JPEG images.  
Tap View photos.  
1
Tap Pictures on camera.  
Tap Pictures on camera to view the pictures on the camera.  
2
D
88  
 
Select pictures for download.  
3
Tap a thumbnail to display the picture  
full frame. You can then swipe left or  
right to display the desired picture and  
tap the check mark to select or deselect.  
Press the back button on the smart de-  
vice to return to the thumbnail list.  
Alternatively, you can select multiple  
pictures by touching and holding  
a
thumbnail until check boxes are dis-  
played at the top right corner of each  
picture and then tapping thumbnails  
to select or deselect. You can also tap  
Select all in the smart device menu to  
select all images or Deselect all to dese-  
lect all images.  
AꢀFolders  
To select all images in a folder, tap the folder icon at the top of the  
display and then touch and hold the folder in the folder list.  
D
89  
Tap Download.  
4
If only one picture is selected, you will be  
prompted to choose the size at which  
the picture will be copied to the smart  
q
w
device. Tap  
(Download at [size]) to  
q
download the picture at the size selected for Image size in  
the Settings menu (page 97), or (Download at selected  
w
size) to choose a size before download (page 97).  
If multiple pictures are selected, a confirma-  
tion dialog will be displayed; tap Down-  
load to download the pictures at the  
size selected for Image size in the Set-  
tings menu (page 97).  
AꢀImageꢀSize  
Regardless of the size selected, pictures may sometimes be down-  
loaded at their original size.  
AꢀLocationꢀData  
The options shown at right will be displayed if  
Settings > Embed location data > Pictures  
oncameraisenabled(page97).Note,however,  
that location data from the smart device will  
not be embedded in pictures downloaded  
from the P7800.  
DꢀDroppedꢀConnections  
If the wireless connection is lost while a picture is being download-  
ed, the picture will not be saved to the smart device (connection  
loss may occur if, for example, the camera turns off during down-  
load). Any pictures downloaded before the connection was inter-  
rupted are unaffected.  
D
90  
Sharing Pictures  
Before sharing pictures, connect to a network with Internet ac-  
cess.  
zzSharing Pictures One at a Time  
Display the smart device menu.  
1
Display a picture full-frame and tap the  
menu button on the smart device to  
view menu options.  
Tap Share.  
2
Tap Share and choose from a list of  
picture-sharing apps and functions (the  
specific contents of the list vary from de-  
vice to device).  
D
91  
 
zzSharing Multiple Pictures  
Display check boxes.  
1
In the thumbnail list, touch and hold any  
of the pictures you want to share until a  
check mark is displayed in the top right  
corner and check boxes appear on the  
remaining images.  
Select pictures.  
2
Tap thumbnails to select or deselect.  
You can also tap Select all in the smart  
device menu to select all images or De-  
select all to deselect all images.  
Tap Share.  
3
Tap Share and choose from a list of  
picture-sharing apps and functions (the  
specific contents of the list vary from de-  
vice to device).  
D
92  
AꢀSharingꢀFolders  
To share all pictures in a folder, tap the folder  
icon at the top of the display to view folders,  
then touch and hold a folder to select all the  
pictures it contains. Selected pictures are in-  
dicated by check marks and can be shared by  
tapping Share as described in Step 3.  
D
93  
Deleting Pictures  
Downloaded pictures can be deleted from the smart device one  
at a time or in groups. The Wireless Mobile Utility can not be  
used to delete pictures from the camera memory card.  
zzDeleting Pictures One at a Time  
Display the smart device menu.  
1
Display a picture full-frame and tap the  
menu button on the smart device to  
view menu options.  
Tap Delete.  
Tap Delete.  
2
A confirmation dialog will be displayed;  
tap Yes.  
D
94  
zzDeleting Multiple Pictures  
Display check boxes.  
1
In the thumbnail list, touch and hold any  
of the pictures you want to delete until a  
check mark is displayed in the top right  
corner and check boxes appear on the  
remaining images.  
Select pictures.  
2
Tap thumbnails to select or deselect.  
You can also tap Select all in the smart  
device menu to select all images or De-  
select all to deselect all images.  
Tap Delete.  
A confirmation dialog will be displayed;  
3
tap Yes.  
D
95  
AꢀDeletingꢀFolders  
To delete all pictures in a folder, tap the folder  
icon at the top of the display to view folders,  
then touch and hold a folder to select all the  
pictures it contains. Selected pictures are in-  
dicated by check marks and can be deleted by  
tapping Delete as described in Step 3.  
D
96  
WirelessꢀMobileꢀUtilityꢀOptions  
To access the options listed below, tap the  
c icon at the top right corner of the display  
or use the smart device menu in the Wireless  
Mobile Utility home display.  
Settings  
Option  
Description  
Choose whether to synchronize the camera clock with  
the smart device.  
Synchronize clock  
Remote photography will end automatically when the  
Battery options camera or smart device battery reaches the selected  
level.  
Thumbnails  
Choose the size of the thumbnails in the playback display.  
Choose whether to embed smart device location data in  
pictures not already containing location data provided  
by the camera. Location data will not be embedded in  
pictures downloaded from the P7800 or if the smart de-  
vice is unable to acquire its current location.  
Embed location  
data  
When downloading multiple images, select Recom-  
mended size or VGA to copy images at sizes approximate-  
ly equivalent to 1920 × 1080 or 640 × 480, respectively.  
Image size  
If ON is selected, the Wireless Mobile Utility will launch  
App auto launch automatically when the smart device detects a signal  
from the camera.  
D
97  
   
Option  
Description  
Wireless Mobile Adjust network settings for the wireless mobile adapter.  
Adapter settings Not available with cameras featuring built-in Wi-Fi.  
Choose an SSID for the wireless mobile adapter. The  
SSID  
smart device displays the SSID when you connect to  
the network manually.  
Authentication/ Choose the authentication method used for connection  
encryption  
Password  
Channel  
to the network.  
Enter a password. The password type is selected using  
Advanced settings > Password entry: choose ASCII for an  
8- to 63-character alphanumeric password, HEX for a  
64-digit hexadecimal password.  
Choose the wireless channel used by the network.  
Autoꢀpower-offꢀ Choose the delay before the wireless mobile adapter  
delay  
enters sleep when there is no wireless connection.  
WPS PIN: Set the wireless mobile adapter WPS PIN.  
WPS mode: Select the adapter WPS mode.  
Password entry: Choose the password type.  
Sub-net mask: Enter a subnet mask.  
DHCP server IP address: Enter the wireless mobile adapt-  
er IP address.  
Advancedꢀ  
settings  
DHCP client IP address: Enter the smart device IP address.  
Currentꢀsettings View current wireless mobile adapter settings.  
Formatꢀsettings Tap Yes to restore default settings.  
Choose the language in which the user interface for the  
Wireless Mobile Utility is displayed.  
Language  
D
98  
Info  
Option  
Description  
Camera  
The name of the camera currently connected.  
View information about the wireless connection. The  
serial number and firmware version are displayed  
only if the camera is connected via the wireless mo-  
bile adapter.  
Wireless Mobile  
Adapter  
Link speed  
View the transmission rate.  
Serial number  
View the product serial number.  
Firmware version View the current firmware version.  
Select About to view Wireless Mobile Utility ver-  
sion information, Check for updates to connect to  
the Google Play service and check for updates, or  
License Terms and Conditions to view the terms of use  
for this application.  
App  
Exit  
Exit the Wireless Mobile Utility.  
SB3L13(11)  
6MWA1811-13  
D
99  
 

Microsoft Visual Studio 2010 Premium Edition 9GD00001 User Manual
Melissa Take 2 ME2TMBCHR User Manual
LG Electronics VX8600 User Manual
JVC Compact Component System CA D501T User Manual
Insignia NS P3112 User Manual
Hitachi Travelstar HTS541060G9AT00 User Manual
Hamilton Beach 840155200 User Manual
DeLonghi DC50 User Manual
Brother MFC 5860CN User Manual
Audiovox CD3210 User Manual