En
Wireless Mobile Utility (Android)
User’s Manual
Install the Wireless Mobile Utility on your smart device (smart-
phone or tablet) to download pictures from a camera or take
pictures remotely.
The Wireless Mobile Utility supports the following cameras.
Some feature built-in Wi-Fi, while others require an optional
wireless mobile adapter. See the section for your camera for
more information on using the Wireless Mobile Utility.
D610, D600, D7100, D5300, D5200, Df
D3200, COOLPIX A
A
B
C
D
Nikon 1: V2, J3, S1, AW1
COOLPIX: P7800, P520, P330, S9500, S6600,
S6500, S5200, AW110
0
Save where otherwise noted, the camera illustrations in this
manual show the D3200.
AꢀTrademarkꢀInformation
Wi-Fi is a registered trademark of the Wi-Fi Alliance. GOOGLE PLAY
is a trademark of Google Inc. All other trade names mentioned in
this manual are the trademarks or registered trademarks of their
respective holders.
1
Notices
• No part of this manual may be reproduced, transmitted, tran-
scribed, stored in a retrieval system, or translated into any lan-
guage in any form without Nikon’s prior written permission.
• Nikon reserves the right to change the specifications of the hard-
ware and software described in this manual at any time and
without prior notice. Nikon will not be held liable for damages
that may result from any mistakes that this manual may contain.
SystemꢀRequirements
Before installing the Wireless Mobile Utility, confirm that your
smart device meets the following system requirements:
• Smartphone: Android 2.3 series, Android 4.x series
• Tablet: Android 4.x series
OS
WirelessꢀLAN
11b/g/n
Screenꢀresolution 800 × 480 pixels (WVGA) or higher
DꢀUsingꢀThisꢀApplicationꢀforꢀtheꢀFirstꢀTime
You must accept the terms and conditions of the End User License
Agreement (EULA) before connecting.
A
3
InstallingꢀtheꢀApp
Locate the app on Google Play.
Connect to Google Play on the smart device and search for
“Wireless Mobile Utility”.
1
Install the app.
Install the Wireless Mobile Utility.
2
EstablishingꢀaꢀWirelessꢀConnection
The following applies only to cameras without built-in Wi-Fi. For
information on cameras with built-in Wi-Fi, see the manual pro-
vided with the camera.
Connect the wireless mobile adapter.
1
Attach the wireless mobile adapter to the camera and turn
the camera on. See the manual supplied with the wireless
mobile adapter for details.
Ready the smart device.
Select Wi-Fi settings > WPS button connection. The smart
2
device will wait for a signal from the camera.
Press the WPS button.
3
Press the WPS button on the wireless mobile adapter for
about 5 s until the LED on the wireless mobile adapter flash-
es red and green.
Launch the Wireless Mobile Utility.
4
When a connection is established, the LED on the wireless
mobile adapter will glow green and the main dialog for the
Wireless Mobile Utility will be displayed on the smart de-
vice. For information on taking pictures, see page 6. For in-
formation on viewing pictures, see page 11.
A
4
AꢀWPS
WPS (Wi-Fi Protected Setup) is a standard designed to make it easy
to establish a secure wireless network. For information on the steps
involved and the length of time the smart device will wait for a con-
nection, see the documentation supplied with the smart device.
AꢀManualꢀWirelessꢀConnections
1ꢀ Display Wi-Fi settings for the smart device.
2ꢀ Select the appropriate SSID (the default SSID begins with
“Nikon”). If you are using a wireless mobile adapter, the LED will
light green when a connection is established.
AꢀConnectionꢀStatus
Connection status is shown by an icon in the
home display:
•
•
ꢀ: Connection established.
ꢀ: No connection. Tap the icon to open the
smart device Wi-Fi settings menu and check
Wi-Fi settings.
DꢀTheꢀWirelessꢀMobileꢀAdapter
While the adapter is inserted, the camera exposure meters will not
turn off; monitor the camera battery level to ensure that the cam-
era does not power off unexpectedly. In addition, some camera
menu items may be grayed out and unavailable and the camera
can not be used for playback or live view. Movie recording can
not be used.
A
5
TakingꢀPhotos
Take pictures remotely from the smart device, or take pictures
with the camera and save them to the smart device.
Remote Photography
Follow the steps below to take photos from the smart device.
Tap Take photos.
The camera viewfinder will go dark and the smart device
will display the view through the camera lens.
1
Focus.
2
In normal- and wide-area AF AF-area modes, tap the subject
in the display to focus (if subject-tracking AF is selected, the
camera will focus using wide-area AF).
A
6
Tap the shutter icon.
3
The shutter will be released after you
remove your finger from the icon; the
resulting photo is first saved to the cam-
era memory card and then downloaded
to the smart device. There is no need to
point the smart device at the camera.
DꢀRemoteꢀPhotography
Remote photography ends automatically when the battery in the
camera or smart device runs low. Note that using remote pho-
tography for an extended period may cause the camera’s internal
temperature to rise; if necessary, remote photography will end au-
tomatically to minimize damage to camera circuits.
The smart device can not be used to adjust camera settings; use
camera controls to adjust settings before starting Step 1. Regard-
less of the release mode selected with the camera, only one picture
will be taken each time you tap the shutter icon. Note that the
display may not update smoothly depending on the device and
network conditions.
A shutter speed of “Time” is available in mode M. Choose a shut-
ter speed of A on the camera and select remote photography
mode on the smart device, then tap the shutter icon to open the
shutter. Shooting ends when the icon is tapped again. Note that
the smart device will not display the view through the camera lens
at a shutter speed of “Bulb”, and that the smart device can not be
used in shooting mode when“Time”is selected.
A
7
AꢀTheꢀRemoteꢀPhotographyꢀDisplay
Mode selection: Tap
to select photo
Settings: The following photography-
related options can be accessed from
the smart device menu:
• Live view: Turn the live view display
on or off.
• Remote shooting auto download:
Choose whether to download pictures
to the smart device after shooting (re-
mote shooting mode only).
• Self-timer: If ON is selected, the cam-
era shutter will be released 2 s after
you tap the shutter icon. The timer
turns off automatically after the shut-
ter is released.
Self-timer icon: Displayed when the self-
timer is on.
Camera settings: Shutter speed, aperture,
etc. Not displayed when device is in
landscape orientation.
Thumbnail area: Downloaded pictures.
A
8
Downloading Photos as They Are Taken
Take photos with the camera and save them to the smart device.
Tap Take photos.
1
Tap
.
2
The dialog shown below at right will be displayed (page 10).
A
9
Take photos.
3
Frame photos in the camera viewfinder and shoot. Photos
are downloaded to the smart device after being saved to
the camera memory card.
AꢀTheꢀPhotoꢀCaptureꢀDisplay
The photo capture display is shown below.
Mode selection: Tap
to select remote
Thumbnail area: Downloaded pictures.
A
10
ViewingꢀPhotos
Tap View photos to view the pictures stored on the smart de-
vice. You can also view the pictures on the camera memory card
and download selected images to the smart device.
Viewing Pictures
View the pictures in camera memory or on the smart device.
Tap View photos.
1
D5300: If the camera contains pictures currently selected
for transmission to the smart device, a confirmation dialog
will be displayed. Tap Cancel to view pictures.
A
11
Choose a device.
2
Tap Pictures on camera to view the pictures on the camera
memory card, Pictures on smart device to view the pictures
stored on the smart device. The pictures will be displayed
as small“thumbnail”images (in some cases, a folder list may
be displayed; tap a folder to view the pictures it contains).
View pictures.
3
Tap a thumbnail to display the picture
full frame. You can then swipe left or
right to view additional pictures.
A
12
AꢀTheꢀFull-FrameꢀDisplay
The full-frame display is shown below.
Return to shooting
mode (available only
if display was accessed
by tapping thumbnail
in shooting display)
Tap picture to hide or
view icons
Zoom in or out
DꢀMovies
Movies can not be viewed using the Wireless Mobile Utility, but
movies can be played back by tapping the movie or playback icon
in the thumbnail list to display a list of movie apps and choosing
an app from the list.
A
13
AꢀFolders
Downloaded pictures are stored in folders with names consisting
of “C” (for new photos downloaded during shooting) or “D” (for ex-
isting pictures downloaded during playback) followed by the date,
an underscore, and a 3-digit folder number. A new folder is created
each time you launch the Wireless Mobile Utility and either cap-
ture new photos or download existing pictures. To view pictures in
other folders, tap the folder icon at the top of the display and tap a
folder to display its contents.
On the smart device, the path to folders created for new photos
downloaded during shooting is “/sdcard/Nikon_WU/Capture”, while
the path to those created for existing pictures downloaded during
playback is“/sdcard/Nikon_WU/Card”.
A
14
Downloading Existing Pictures
Download pictures from the camera memory card.
Tap View photos.
1
D5300: If the camera contains pictures currently selected
for transmission to the smart device, a confirmation dialog
will be displayed. Tap OK to begin download.
Tap Pictures on camera.
Tap Pictures on camera to view the pictures on the camera.
2
A
15
Select pictures for download.
3
Tap a thumbnail to display the picture
full frame. You can then swipe left or
right to display the desired picture and
tap the check mark to select or deselect.
Press the back button on the smart de-
vice to return to the thumbnail list.
Alternatively, you can select multiple
pictures by touching and holding
a
thumbnail until check boxes are dis-
played at the top right corner of each
picture and then tapping thumbnails
to select or deselect. You can also tap
Select all in the smart device menu to
select all images or Deselect all to dese-
lect all images.
AꢀFolders
To select all images in a folder, tap the folder icon at the top of the
display and then touch and hold the folder in the folder list.
A
16
Tap Download.
4
If only one picture is selected, you will be
prompted to choose the size at which
the picture will be copied to the smart
q
w
device. Tap
(Download at [size]) to
q
download the picture at the size selected for Image size in
the Settings menu (page 24), or (Download at selected
w
size) to choose a size before download (page 24).
If multiple pictures are selected, a confirma-
tion dialog will be displayed; tap Down-
load to download the pictures at the
size selected for Image size in the Set-
AꢀImageꢀSize
Regardless of the size selected, pictures may sometimes be down-
loaded at their original size.
AꢀLocationꢀData
The options shown at right will be displayed if
Settings > Embed location data > Pictures
on camera is enabled (page 24).
DꢀDroppedꢀConnections
If the wireless connection is lost while a picture is being download-
ed, the picture will not be saved to the smart device (connection
loss may occur if, for example, the camera turns off during down-
load). Any pictures downloaded before the connection was inter-
rupted are unaffected.
A
17
Sharing Pictures
Before sharing pictures, connect to a network with Internet ac-
cess.
zzSharing Pictures One at a Time
Display the smart device menu.
1
Display a picture full-frame and tap the
menu button on the smart device to
view menu options.
Tap Share.
2
Tap Share and choose from a list of
picture-sharing apps and functions (the
specific contents of the list vary from de-
vice to device).
A
18
zzSharing Multiple Picture
Display check boxes.
1
In the thumbnail list, touch and hold any
of the pictures you want to share until a
check mark is displayed in the top right
corner and check boxes appear on the
remaining images.
Select pictures.
2
Tap thumbnails to select or deselect.
You can also tap Select all in the smart
device menu to select all images or De-
select all to deselect all images.
Tap Share.
3
Tap Share and choose from a list of
picture-sharing apps and functions (the
specific contents of the list vary from de-
vice to device).
A
19
AꢀSharingꢀFolders
To share all pictures in a folder, tap the folder
icon at the top of the display to view folders,
then touch and hold a folder to select all the
pictures it contains. Selected pictures are in-
dicated by check marks and can be shared by
tapping Share as described in Step 3.
A
20
Deleting Pictures
Downloaded pictures can be deleted from the smart device one
at a time or in groups. The Wireless Mobile Utility can not be
used to delete pictures from the camera memory card.
zzDeleting Pictures One at a Time
Display the smart device menu.
1
Display a picture full-frame and tap the
menu button on the smart device to
view menu options.
Tap Delete.
Tap Delete.
2
A confirmation dialog will be displayed;
tap Yes.
A
21
zzDeleting Multiple Pictures
Display check boxes.
1
In the thumbnail list, touch and hold any
of the pictures you want to delete until a
check mark is displayed in the top right
corner and check boxes appear on the
remaining images.
Select pictures.
2
Tap thumbnails to select or deselect.
You can also tap Select all in the smart
device menu to select all images or De-
select all to deselect all images.
Tap Delete.
A confirmation dialog will be displayed;
3
tap Yes.
A
22
AꢀDeletingꢀFolders
To delete all pictures in a folder, tap the folder
icon at the top of the display to view folders,
then touch and hold a folder to select all the
pictures it contains. Selected pictures are in-
dicated by check marks and can be deleted by
tapping Delete as described in Step 3.
A
23
WirelessꢀMobileꢀUtilityꢀOptions
To access the options listed below, tap the
c icon at the top right corner of the display
or use the smart device menu in the Wireless
Mobile Utility home display.
Settings
Option
Description
Choose whether to synchronize the camera clock with
the smart device.
Synchronize clock
Remote photography will end automatically when the
camera or smart device battery reaches the selected level.
Battery options
Thumbnails
Choose the size of the thumbnails in the playback display.
Choose whether to embed smart device location data in
Embed location pictures not already containing location data provided
data
by the camera. Location data will not be embedded if
the smart device is unable to acquire its current location.
When downloading multiple images, select Recom-
mended size or VGA to copy images at sizes approximate-
ly equivalent to 1920 × 1080 or 640 × 480, respectively.
Image size
If ON is selected, the Wireless Mobile Utility will launch
App auto launch automatically when the smart device detects a signal
from the camera.
A
24
Option
Description
Adjust network settings for the wireless mobile adapter.
Wireless Mobile Note that the Auto power-off delay and Advanced settings
Adapter settings > WPS PIN/WPS mode options are not available with cam-
eras featuring built-in Wi-Fi.
Choose an SSID for the wireless mobile adapter. The
SSID
smart device displays the SSID when you connect to
the network manually.
Authentication/ Choose the authentication method used for connection
encryption
Password
Channel
to the network.
Enter a password. The password type is selected using
Advanced settings > Password entry: choose ASCII for an
8- to 63-character alphanumeric password, HEX for a 64-
digit hexadecimal password.
Choose the wireless channel used by the network.
Auto power-off Choose the delay before the wireless mobile adapter
delay
enters sleep when there is no wireless connection.
• WPS PIN: Set the wireless mobile adapter WPS PIN.
• WPS mode: Select the adapter WPS mode.
• Password entry: Choose the password type.
• Sub-net mask: Enter a subnet mask.
• DHCP server IP address: Enter the wireless mobile adapt-
er IP address.
Advanced
settings
• DHCP client IP address: Enter the smart device IP address.
Current settings View current wireless mobile adapter settings.
Format settings Tap Yes to restore default settings.
Choose the language in which the user interface for the
Wireless Mobile Utility is displayed.
Language
A
25
Info
Option
Description
Camera
The name of the camera currently connected.
View information about the wireless connection. The
serial number and firmware version are displayed
only if the camera is connected via the wireless mo-
bile adapter.
Wireless Mobile
Adapter
Linkꢀspeed
View the transmission rate.
Serialꢀnumber
View the product serial number.
Firmwareꢀversion View the current firmware version.
Select About to view Wireless Mobile Utility ver-
sion information, Check for updates to connect to
the Google Play service and check for updates, or
License Terms and Conditions to view the terms of use
for this application.
App
Exit
Exit the Wireless Mobile Utility.
A
26
D3200, COOLPIX A
B
This section describes the options available when the Wireless
Mobile Utility and an optional wireless mobile adapter are used
to connect to D3200 and COOLPIX A cameras.
Features
Use the Wireless Mobile Utility to:
Take pictures remotely (031):Tap the shut-
ter icon in the Wireless Mobile Utility to
take pictures and download them to
the smart device.
Download pictures as they are taken (034):
Take pictures with the camera and save
them to the smart device.
View pictures (036):View the pictures stored on the smart device or
the camera memory card.
Download pictures (040): Download existing pictures from the cam-
era memory card.
Share pictures (043): Share pictures via e-mail or upload pictures to
photo-sharing sites.
For information on inserting the adapter, see page 29.
B
27
Notices
• No part of this manual may be reproduced, transmitted, tran-
scribed, stored in a retrieval system, or translated into any lan-
guage in any form without Nikon’s prior written permission.
• Nikon reserves the right to change the specifications of the hard-
ware and software described in this manual at any time and
without prior notice. Nikon will not be held liable for damages
that may result from any mistakes that this manual may contain.
SystemꢀRequirements
Before installing the Wireless Mobile Utility, confirm that your
smart device meets the following system requirements:
• Smartphone: Android 2.3 series, Android 4.x series
• Tablet: Android 4.x series
OS
WirelessꢀLAN
11b/g/n
Screenꢀresolution 800 × 480 pixels (WVGA) or higher
DꢀUsingꢀThisꢀApplicationꢀforꢀtheꢀFirstꢀTime
You must accept the terms and conditions of the End User License
Agreement (EULA) before connecting.
B
28
InstallingꢀtheꢀApp
Locate the app on Google Play.
Connect to Google Play on the smart device and search for
“Wireless Mobile Utility”.
1
Install the app.
Install the Wireless Mobile Utility.
2
EstablishingꢀaꢀWirelessꢀConnection
Connect the wireless mobile adapter.
1
Attach the wireless mobile adapter to the camera and turn
the camera on. See the manual supplied with the wireless
mobile adapter for details.
Ready the smart device.
Select Wi-Fi settings > WPS button connection. The smart
2
device will wait for a signal from the camera.
Press the WPS button.
3
Press the WPS button on the wireless mobile adapter for
about 5 s until the LED on the wireless mobile adapter flash-
es red and green.
Launch the Wireless Mobile Utility.
4
When a connection is established, the LED on the wireless
mobile adapter will glow green and the main dialog for the
Wireless Mobile Utility will be displayed on the smart de-
vice. For information on taking pictures, see page 31. For in-
formation on viewing pictures, see page 36.
B
29
AꢀWPS
WPS (Wi-Fi Protected Setup) is a standard designed to make it easy
to establish a secure wireless network. For information on the steps
involved and the length of time the smart device will wait for a con-
nection, see the documentation supplied with the smart device.
AꢀManualꢀWirelessꢀConnections
1ꢀ Display Wi-Fi settings for the smart device.
2ꢀ Select the appropriate SSID (the default SSID begins with
“Nikon”). The LED will light green when a connection is estab-
lished.
AꢀConnectionꢀStatus
Connection status is shown by an icon in the
home display:
•
•
ꢀ: Connection established.
ꢀ: No connection. Tap the icon to open the
smart device Wi-Fi settings menu and check
Wi-Fi settings.
DꢀTheꢀWirelessꢀMobileꢀAdapter
While the adapter is inserted, the camera exposure meters will not
turn off; monitor the camera battery level to ensure that the cam-
era does not power off unexpectedly. In addition, some camera
menu items may be grayed out and unavailable and the camera
can not be used for playback or live view. Movie recording can
not be used.
B
30
TakingꢀPhotos
Take pictures remotely from the smart device, or take pictures
with the camera and save them to the smart device.
Remote Photography
Follow the steps below to take photos from the smart device.
Tap Take photos.
The camera viewfinder will go dark and the smart device
will display the view through the camera lens.
1
Tap the shutter icon.
2
Tap the shutter icon. If the camera is able
to focus, the shutter will be released
after you remove your finger from the
icon; the resulting photo is first saved
to the camera memory card and then
downloaded to the smart device. There
is no need to point the smart device at
the wireless mobile adapter.
B
31
DꢀRemoteꢀPhotography
Remote photography ends automatically when the battery in the
camera or smart device runs low. Note that using remote pho-
tography for an extended period may cause the camera’s internal
temperature to rise; if necessary, remote photography will end au-
tomatically to minimize damage to camera circuits.
The smart device can not be used to adjust camera settings; use
camera controls to adjust settings before starting Step 1. Regard-
less of the release mode selected with the camera, only one picture
will be taken each time you tap the shutter icon. Note that the
display may not update smoothly depending on the device and
network conditions.
In normal- and wide-area AF AF-area modes, the camera will focus
on the subject in the focus area selected with the camera; if subject-
tracking AF is selected, the camera will focus using wide-area AF.
B
32
AꢀTheꢀRemoteꢀPhotographyꢀDisplay
Mode selection: Tap
to select photo
Settings: The following photography-
related options can be accessed from
the smart device menu.
• Remote shooting auto download:
Choose whether to download pictures
to the smart device after shooting (re-
mote shooting mode only).
• Self-timer: If ON is selected, the cam-
era shutter will be released 2 s after
you tap the shutter icon. The timer
turns off automatically after the shut-
ter is released.
Self-timer icon: Displayed when the self-
timer is on.
Camera settings: Shutter speed, aperture,
etc. Not displayed when device is in
landscape orientation.
Thumbnail area: Downloaded pictures.
B
33
Downloading Photos as They Are Taken
Take photos with the camera and save them to the smart device.
Tap Take photos.
1
Tap
.
2
The dialog shown below at right will be displayed (page 35).
B
34
Take photos.
3
Frame photos in the camera viewfinder and shoot. Photos
are downloaded to the smart device after being saved to
the camera memory card.
AꢀTheꢀPhotoꢀCaptureꢀDisplay
The photo capture display is shown below.
Mode selection: Tap
to select remote
Thumbnail area: Downloaded pictures.
B
35
ViewingꢀPhotos
Tap View photos to view the pictures stored on the smart de-
vice. You can also view the pictures on the camera memory card
and download selected images to the smart device.
Viewing Pictures
View the pictures in camera memory or on the smart device.
Tap View photos.
1
B
36
Choose a device.
2
Tap Pictures on camera to view the pictures on the camera
memory card, Pictures on smart device to view the pictures
stored on the smart device. The pictures will be displayed
as small“thumbnail”images (in some cases, a folder list may
be displayed; tap a folder to view the pictures it contains).
View pictures.
3
Tap a thumbnail to display the picture
full frame. You can then swipe left or
right to view additional pictures.
B
37
AꢀTheꢀFull-FrameꢀDisplay
The full-frame display is shown below.
Return to shooting
mode (available only
if display was accessed
by tapping thumbnail
in shooting display)
Tap picture to hide or
view icons
Zoom in or out
DꢀMovies
Movies can not be viewed using the Wireless Mobile Utility, but
movies can be played back by tapping the movie or playback icon
in the thumbnail list to display a list of movie apps and choosing
an app from the list.
B
38
AꢀFolders
Downloaded pictures are stored in folders with names consisting
of “C” (for new photos downloaded during shooting) or “D” (for ex-
isting pictures downloaded during playback) followed by the date,
an underscore, and a 3-digit folder number. A new folder is created
each time you launch the Wireless Mobile Utility and either cap-
ture new photos or download existing pictures. To view pictures in
other folders, tap the folder icon at the top of the display and tap a
folder to display its contents.
On the smart device, the path to folders created for new photos
downloaded during shooting is “/sdcard/Nikon_WU/Capture”, while
the path to those created for existing pictures downloaded during
playback is“/sdcard/Nikon_WU/Card”.
B
39
Downloading Existing Pictures
Download pictures from the camera memory card.
Tap View photos.
1
Tap Pictures on camera.
Tap Pictures on camera to view the pictures on the camera.
2
B
40
Select pictures for download.
3
Tap a thumbnail to display the picture
full frame. You can then swipe left or
right to display the desired picture and
tap the check mark to select or deselect.
Press the back button on the smart de-
vice to return to the thumbnail list.
Alternatively, you can select multiple
pictures by touching and holding
a
thumbnail until check boxes are dis-
played at the top right corner of each
picture and then tapping thumbnails
to select or deselect. You can also tap
Select all in the smart device menu to
select all images or Deselect all to dese-
lect all images.
AꢀFolders
To select all images in a folder, tap the folder icon at the top of the
display and then touch and hold the folder in the folder list.
B
41
Tap Download.
4
If only one picture is selected, you will be
prompted to choose the size at which
the picture will be copied to the smart
q
w
device. Tap
(Download at [size]) to
q
download the picture at the size selected for Image size in
the Settings menu (page 49), or (Download at selected
w
size) to choose a size before download (page 49).
If multiple pictures are selected, a confirma-
tion dialog will be displayed; tap Down-
load to download the pictures at the
size selected for Image size in the Set-
AꢀImageꢀSize
Regardless of the size selected, pictures may sometimes be down-
loaded at their original size.
AꢀLocationꢀData
The options shown at right will be displayed if
Settings > Embed location data > Pictures
on camera is enabled (page 49).
DꢀDroppedꢀConnections
If the wireless connection is lost while a picture is being download-
ed, the picture will not be saved to the smart device (connection
loss may occur if, for example, the camera turns off during down-
load). Any pictures downloaded before the connection was inter-
rupted are unaffected.
B
42
Sharing Pictures
Before sharing pictures, connect to a network with Internet ac-
cess.
zzSharing Pictures One at a Time
Display the smart device menu.
1
Display a picture full-frame and tap the
menu button on the smart device to
view menu options.
Tap Share.
2
Tap Share and choose from a list of
picture-sharing apps and functions (the
specific contents of the list vary from de-
vice to device).
B
43
zzSharing Multiple Pictures
Display check boxes.
1
In the thumbnail list, touch and hold any
of the pictures you want to share until a
check mark is displayed in the top right
corner and check boxes appear on the
remaining images.
Select pictures.
2
Tap thumbnails to select or deselect.
You can also tap Select all in the smart
device menu to select all images or De-
select all to deselect all images.
Tap Share.
3
Tap Share and choose from a list of
picture-sharing apps and functions (the
specific contents of the list vary from de-
vice to device).
B
44
AꢀSharingꢀFolders
To share all pictures in a folder, tap the folder
icon at the top of the display to view folders,
then touch and hold a folder to select all the
pictures it contains. Selected pictures are in-
dicated by check marks and can be shared by
tapping Share as described in Step 3.
B
45
Deleting Pictures
Downloaded pictures can be deleted from the smart device one
at a time or in groups. The Wireless Mobile Utility can not be
used to delete pictures from the camera memory card.
zzDeleting Pictures One at a Time
Display the smart device menu.
1
Display a picture full-frame and tap the
menu button on the smart device to
view menu options.
Tap Delete.
Tap Delete.
2
A confirmation dialog will be displayed;
tap Yes.
B
46
zzDeleting Multiple Pictures
Display check boxes.
1
In the thumbnail list, touch and hold any
of the pictures you want to delete until a
check mark is displayed in the top right
corner and check boxes appear on the
remaining images.
Select pictures.
2
Tap thumbnails to select or deselect.
You can also tap Select all in the smart
device menu to select all images or De-
select all to deselect all images.
Tap Delete.
A confirmation dialog will be displayed;
3
tap Yes.
B
47
AꢀDeletingꢀFolders
To delete all pictures in a folder, tap the folder
icon at the top of the display to view folders,
then touch and hold a folder to select all the
pictures it contains. Selected pictures are in-
dicated by check marks and can be deleted by
tapping Delete as described in Step 3.
B
48
WirelessꢀMobileꢀUtilityꢀOptions
To access the options listed below, tap the
c icon at the top right corner of the display
or use the smart device menu in the Wireless
Mobile Utility home display.
Settings
Option
Description
Choose whether to synchronize the camera clock with
the smart device.
Synchronize clock
Remote photography will end automatically when the
camera or smart device battery reaches the selected level.
Battery options
Thumbnails
Choose the size of the thumbnails in the playback display.
Choose whether to embed smart device location data in
Embed location pictures not already containing location data provided
data
by the camera. Location data will not be embedded if
the smart device is unable to acquire its current location.
When downloading multiple images, select Recom-
mended size or VGA to copy images at sizes approximate-
ly equivalent to 1920 × 1080 or 640 × 480, respectively.
Image size
If ON is selected, the Wireless Mobile Utility will launch
App auto launch automatically when the smart device detects a signal
from the wireless mobile adapter.
B
49
Option
Description
Wireless Mobile
Adapter settings
Adjust network settings for the wireless mobile adapter.
Choose an SSID for the wireless mobile adapter. The
smart device displays the SSID when you connect to
the network manually.
SSID
Authentication/ Choose the authentication method used for connection
encryption
Password
Channel
to the network.
Enter a password. The password type is selected using
Advanced settings > Password entry: choose ASCII for an
8- to 63-character alphanumeric password, HEX for a
64-digit hexadecimal password.
Choose the wireless channel used by the network.
Autoꢀpower-offꢀ Choose the delay before the wireless mobile adapter
delay
enters sleep when there is no wireless connection.
• WPS PIN: Set the wireless mobile adapter WPS PIN.
• WPS mode: Select the adapter WPS mode.
• Password entry: Choose the password type.
• Sub-net mask: Enter a subnet mask.
• DHCP server IP address: Enter the wireless mobile adapt-
er IP address.
Advancedꢀ
settings
• DHCP client IP address: Enter the smart device IP address.
Currentꢀsettings View current wireless mobile adapter settings.
Formatꢀsettings Tap Yes to restore default settings.
Choose the language in which the user interface for the
Wireless Mobile Utility is displayed.
Language
B
50
Info
Option
Description
Camera
The name of the camera currently connected.
Wireless Mobile
Adapter
View information about the wireless mobile adapter.
Linkꢀspeed
View the transmission rate.
Serialꢀnumber
View the product serial number.
Firmwareꢀversion View the current firmware version.
Select About to view Wireless Mobile Utility ver-
sion information, Check for updates to connect to
the Google Play service and check for updates, or
License Terms and Conditions to view the terms of use
for this application.
App
Exit
Exit the Wireless Mobile Utility.
B
51
Nikon 1: V2, J3, S1, AW1
C
This section describes the options available when the Wireless
Mobile Utility and an optional wireless mobile adapter are used
to connect to Nikon 1 V2, J3, S1 and AW1 cameras.
Features
Use the Wireless Mobile Utility to:
Take pictures remotely (056):Tap the shut-
ter icon in the Wireless Mobile Utility to
take pictures and download them to
the smart device.
View pictures (059):View the pictures stored on the smart device or
the camera memory card.
Download pictures (063): Download existing pictures from the cam-
era memory card.
Share pictures (066): Share pictures via e-mail or upload pictures to
photo-sharing sites.
For information on inserting the adapter, see page 54.
C
52
Notices
• No part of this manual may be reproduced, transmitted, tran-
scribed, stored in a retrieval system, or translated into any lan-
guage in any form without Nikon’s prior written permission.
• Nikon reserves the right to change the specifications of the hard-
ware and software described in this manual at any time and
without prior notice. Nikon will not be held liable for damages
that may result from any mistakes that this manual may contain.
SystemꢀRequirements
Before installing the Wireless Mobile Utility, confirm that your
smart device meets the following system requirements:
• Smartphone: Android 2.3 series, Android 4.x series
• Tablet: Android 4.x series
OS
WirelessꢀLAN
11b/g/n
Screenꢀresolution 800 × 480 pixels (WVGA) or higher
DꢀUsingꢀThisꢀApplicationꢀforꢀtheꢀFirstꢀTime
You must accept the terms and conditions of the End User License
Agreement (EULA) before connecting.
C
53
InstallingꢀtheꢀApp
Locate the app on Google Play.
Connect to Google Play on the smart device and search for
“Wireless Mobile Utility”.
1
Install the app.
Install the Wireless Mobile Utility.
2
EstablishingꢀaꢀWirelessꢀConnection
Connect the wireless mobile adapter.
1
Attach the wireless mobile adapter to the camera and turn
the camera on. See the manual supplied with the wireless
mobile adapter for details.
Ready the smart device.
Select Wi-Fi settings > WPS button connection. The smart
2
device will wait for a signal from the camera.
Press the WPS button.
3
Press the WPS button on the wireless mobile adapter for
about 5 s until the LED on the wireless mobile adapter flash-
es red and green.
Launch the Wireless Mobile Utility.
4
When a connection is established, the LED on the wireless
mobile adapter will glow green and the main dialog for the
Wireless Mobile Utility will be displayed on the smart de-
vice. For information on taking pictures, see page 56. For in-
formation on viewing pictures, see page 59.
C
54
AꢀWPS
WPS (Wi-Fi Protected Setup) is a standard designed to make it easy
to establish a secure wireless network. For information on the steps
involved and the length of time the smart device will wait for a con-
nection, see the documentation supplied with the smart device.
AꢀManualꢀWirelessꢀConnections
1ꢀ Display Wi-Fi settings for the smart device.
2ꢀ Select the appropriate SSID (the default SSID begins with
“Nikon”). The LED will light green when a connection is estab-
lished.
AꢀConnectionꢀStatus
Connection status is shown by an icon in the
home display:
•
•
ꢀ: Connection established.
ꢀ: No connection. Tap the icon to open the
smart device Wi-Fi settings menu and check
Wi-Fi settings.
DꢀTheꢀWirelessꢀMobileꢀAdapter
While the adapter is inserted, the camera exposure meters will not
turn off; monitor the camera battery level to ensure that the cam-
era does not power off unexpectedly. In addition, some camera
menu items may be grayed out and unavailable and the camera
can not be used for playback or live view. Movie recording can
not be used.
C
55
TakingꢀPhotos
Follow the steps below to take photos from the smart device.
Tap Take photos.
The camera viewfinder will go dark and the smart device
will display the view through the camera lens.
1
Tap the shutter icon.
2
The shutter will be released after you
remove your finger from the icon and
the camera focuses (note that no photo
will be taken if the camera is unable to
focus); the resulting photo is first saved
to the camera memory card and then
downloaded to the smart device. There
is no need to point the smart device at
the wireless mobile adapter.
C
56
DꢀRemoteꢀPhotography
Remote photography ends automatically when the battery in the
camera or smart device runs low. Note that using remote pho-
tography for an extended period may cause the camera’s internal
temperature to rise; if necessary, remote photography will end au-
tomatically to minimize damage to camera circuits.
The smart device can not be used to adjust camera settings; use
camera controls to adjust settings before starting Step 1. Regard-
less of the release mode selected with the camera, only one picture
will be taken each time you tap the shutter icon. Note that the
display may not update smoothly depending on the device and
network conditions.
Regardless of the settings selected with the camera, pictures will be
taken in mode P (programmed auto) using single-servo autofocus
(AF-S) and auto-area AF. Face-priority AF is disabled and the focus
point is not displayed.
C
57
AꢀTheꢀRemoteꢀPhotographyꢀDisplay
Settings: The following photography-
related options can be accessed from
the smart device menu.
• Remote shooting auto download:
Choose whether to download pictures
to the smart device after shooting.
• Self-timer: If ON is selected, the cam-
era shutter will be released 2 s after
you tap the shutter icon. The timer
turns off automatically after the shut-
ter is released.
Self-timer icon: Displayed when the self-
timer is on.
Camera settings: Shutter speed, aperture,
etc. Not displayed when device is in
landscape orientation.
Thumbnail area: Downloaded pictures.
C
58
ViewingꢀPhotos
Tap View photos to view the pictures stored on the smart de-
vice. You can also view the pictures on the camera memory card
and download selected images to the smart device.
Viewing Pictures
View the pictures in camera memory or on the smart device.
Tap View photos.
1
C
59
Choose a device.
2
Tap Pictures on camera to view the pictures on the camera
memory card, Pictures on smart device to view the pictures
stored on the smart device. The pictures will be displayed
as small“thumbnail”images (in some cases, a folder list may
be displayed; tap a folder to view the pictures it contains).
View pictures.
3
Tap a thumbnail to display the picture
full frame. You can then swipe left or
right to view additional pictures.
C
60
AꢀTheꢀFull-FrameꢀDisplay
The full-frame display is shown below.
Return to shooting
mode (available only
if display was accessed
by tapping thumbnail
in shooting display)
Tap picture to hide or
view icons
Zoom in or out
DꢀMovies
Movies can not be viewed using the Wireless Mobile Utility, but
movies can be played back by tapping the movie or playback icon
in the thumbnail list to display a list of movie apps and choosing
an app from the list.
C
61
AꢀFolders
Downloaded pictures are stored in folders with names consisting
of “C” (for new photos downloaded during shooting) or “D” (for ex-
isting pictures downloaded during playback) followed by the date,
an underscore, and a 3-digit folder number. A new folder is created
each time you launch the Wireless Mobile Utility and either cap-
ture new photos or download existing pictures. To view pictures in
other folders, tap the folder icon at the top of the display and tap a
folder to display its contents.
On the smart device, the path to folders created for new photos
downloaded during shooting is “/sdcard/Nikon_WU/Capture”, while
the path to those created for existing pictures downloaded during
playback is“/sdcard/Nikon_WU/Card”.
C
62
Downloading Existing Pictures
Download pictures from the camera memory card.
Tap View photos.
1
Tap Pictures on camera.
Tap Pictures on camera to view the pictures on the camera.
2
C
63
Select pictures for download.
3
Tap a thumbnail to display the picture
full frame. You can then swipe left or
right to display the desired picture and
tap the check mark to select or deselect.
Press the back button on the smart de-
vice to return to the thumbnail list.
Alternatively, you can select multiple
pictures by touching and holding
a
thumbnail until check boxes are dis-
played at the top right corner of each
picture and then tapping thumbnails
to select or deselect. You can also tap
Select all in the smart device menu to
select all images or Deselect all to dese-
lect all images.
AꢀFolders
To select all images in a folder, tap the folder icon at the top of the
display and then touch and hold the folder in the folder list.
C
64
Tap Download.
4
If only one picture is selected, you will be
prompted to choose the size at which
the picture will be copied to the smart
q
w
device. Tap
(Download at [size]) to
q
download the picture at the size selected for Image size in
the Settings menu (page 72), or (Download at selected
w
size) to choose a size before download (page 72).
If multiple pictures are selected, a confirma-
tion dialog will be displayed; tap Down-
load to download the pictures at the
size selected for Image size in the Set-
AꢀImageꢀSize
Regardless of the size selected, pictures may sometimes be down-
loaded at their original size.
AꢀLocationꢀData
The options shown at right will be displayed if
Settings > Embed location data > Pictures
on camera is enabled (page 72).
DꢀDroppedꢀConnections
If the wireless connection is lost while a picture is being download-
ed, the picture will not be saved to the smart device (connection
loss may occur if, for example, the camera turns off during down-
load). Any pictures downloaded before the connection was inter-
rupted are unaffected.
C
65
Sharing Pictures
Before sharing pictures, connect to a network with Internet ac-
cess.
zzSharing Pictures One at a Time
Display the smart device menu.
1
Display a picture full-frame and tap the
menu button on the smart device to
view menu options.
Tap Share.
2
Tap Share and choose from a list of
picture-sharing apps and functions (the
specific contents of the list vary from de-
vice to device).
C
66
zzSharing Multiple Pictures
Display check boxes.
1
In the thumbnail list, touch and hold any
of the pictures you want to share until a
check mark is displayed in the top right
corner and check boxes appear on the
remaining images.
Select pictures.
2
Tap thumbnails to select or deselect.
You can also tap Select all in the smart
device menu to select all images or De-
select all to deselect all images.
Tap Share.
3
Tap Share and choose from a list of
picture-sharing apps and functions (the
specific contents of the list vary from de-
vice to device).
C
67
AꢀSharingꢀFolders
To share all pictures in a folder, tap the folder
icon at the top of the display to view folders,
then touch and hold a folder to select all the
pictures it contains. Selected pictures are in-
dicated by check marks and can be shared by
tapping Share as described in Step 3.
C
68
Deleting Pictures
Downloaded pictures can be deleted from the smart device one
at a time or in groups. The Wireless Mobile Utility can not be
used to delete pictures from the camera memory card.
zzDeleting Pictures One at a Time
Display the smart device menu.
1
Display a picture full-frame and tap the
menu button on the smart device to
view menu options.
Tap Delete.
Tap Delete.
2
A confirmation dialog will be displayed;
tap Yes.
C
69
zzDeleting Multiple Pictures
Display check boxes.
1
In the thumbnail list, touch and hold any
of the pictures you want to delete until a
check mark is displayed in the top right
corner and check boxes appear on the
remaining images.
Select pictures.
2
Tap thumbnails to select or deselect.
You can also tap Select all in the smart
device menu to select all images or De-
select all to deselect all images.
Tap Delete.
A confirmation dialog will be displayed;
3
tap Yes.
C
70
AꢀDeletingꢀFolders
To delete all pictures in a folder, tap the folder
icon at the top of the display to view folders,
then touch and hold a folder to select all the
pictures it contains. Selected pictures are in-
dicated by check marks and can be deleted by
tapping Delete as described in Step 3.
C
71
WirelessꢀMobileꢀUtilityꢀOptions
To access the options listed below, tap the
c icon at the top right corner of the display
or use the smart device menu in the Wireless
Mobile Utility home display.
Settings
Option
Description
Choose whether to synchronize the camera clock with
the smart device.
Synchronize clock
Remote photography will end automatically when the
camera or smart device battery reaches the selected level.
Battery options
Thumbnails
Choose the size of the thumbnails in the playback display.
Choose whether to embed smart device location data in
Embed location pictures not already containing location data provided
data
by the camera. Location data will not be embedded if
the smart device is unable to acquire its current location.
When downloading multiple images, select Recom-
mended size or VGA to copy images at sizes approximate-
ly equivalent to 1920 × 1080 or 640 × 480, respectively.
Image size
If ON is selected, the Wireless Mobile Utility will launch
App auto launch automatically when the smart device detects a signal
from the wireless mobile adapter.
C
72
Option
Description
Wireless Mobile
Adapter settings
Adjust network settings for the wireless mobile adapter.
Choose an SSID for the wireless mobile adapter. The
smart device displays the SSID when you connect to
the network manually.
SSID
Authentication/ Choose the authentication method used for connection
encryption
Password
Channel
to the network.
Enter a password. The password type is selected using
Advanced settings > Password entry: choose ASCII for an
8- to 63-character alphanumeric password, HEX for a
64-digit hexadecimal password.
Choose the wireless channel used by the network.
Autoꢀpower-offꢀ Choose the delay before the wireless mobile adapter
delay
enters sleep when there is no wireless connection.
• WPS PIN: Set the wireless mobile adapter WPS PIN.
• WPS mode: Select the adapter WPS mode.
• Password entry: Choose the password type.
• Sub-net mask: Enter a subnet mask.
• DHCP server IP address: Enter the wireless mobile adapt-
er IP address.
Advancedꢀ
settings
• DHCP client IP address: Enter the smart device IP address.
Currentꢀsettings View current wireless mobile adapter settings.
Formatꢀsettings Tap Yes to restore default settings.
Choose the language in which the user interface for the
Wireless Mobile Utility is displayed.
Language
C
73
Info
Option
Description
Camera
The name of the camera currently connected.
Wireless Mobile
Adapter
View information about the wireless mobile adapter.
Linkꢀspeed
View the transmission rate.
Serialꢀnumber
View the product serial number.
Firmwareꢀversion View the current firmware version.
Select About to view Wireless Mobile Utility ver-
sion information, Check for updates to connect to
the Google Play service and check for updates, or
License Terms and Conditions to view the terms of use
for this application.
App
Exit
Exit the Wireless Mobile Utility.
C
74
COOLPIX: P7800, P520, P330, S9500, S6600,
S6500, S5200, AW110
D
This section describes the options available when the Wireless
Mobile Utility is used to connect to COOLPIX P7800, P520, P330,
S9500, S6600, S6500, S5200, and AW110 cameras.
Features
Use the Wireless Mobile Utility to:
Take pictures remotely (079):Tap the shut-
ter icon in the Wireless Mobile Utility to
take pictures and download them to
the smart device.
Download pictures as they are taken (082):
Take pictures with a compatible cam-
era and save them to the smart device.
View pictures (084):View the pictures stored on the smart device or
the camera memory card.
Download pictures (088): Download existing pictures from the cam-
era memory card.
Share pictures (091): Share pictures via e-mail or upload pictures to
photo-sharing sites.
For information on establishing a connection, see page 77.
D
75
Notices
• No part of this manual may be reproduced, transmitted, tran-
scribed, stored in a retrieval system, or translated into any lan-
guage in any form without Nikon’s prior written permission.
• Nikon reserves the right to change the specifications of the hard-
ware and software described in this manual at any time and
without prior notice. Nikon will not be held liable for damages
that may result from any mistakes that this manual may contain.
SystemꢀRequirements
Before installing the Wireless Mobile Utility, confirm that your
smart device meets the following system requirements:
• Smartphone: Android 2.3 series, Android 4.x series
• Tablet: Android 4.x series
OS
WirelessꢀLAN
11b/g/n
Screenꢀresolution 800 × 480 pixels (WVGA) or higher
DꢀUsingꢀThisꢀApplicationꢀforꢀtheꢀFirstꢀTime
You must accept the terms and conditions of the End User License
Agreement (EULA) before connecting.
D
76
InstallingꢀtheꢀApp
Locate the app on Google Play.
Connect to Google Play on the smart device and search for
“Wireless Mobile Utility”.
1
Install the app.
Install the Wireless Mobile Utility.
2
EstablishingꢀaꢀWirelessꢀConnection
The following applies only to cameras without built-in Wi-Fi. For
information on cameras with built-in Wi-Fi, see the manual pro-
vided with the camera.
Connect the wireless mobile adapter.
1
Attach the wireless mobile adapter to the camera and turn
the camera on. See the manual supplied with the wireless
mobile adapter for details.
Ready the smart device.
Select Wi-Fi settings > WPS button connection. The smart
2
device will wait for a signal from the camera.
Press the WPS button.
3
Press the WPS button on the wireless mobile adapter for
about 5 s until the LED on the wireless mobile adapter flash-
es red and green.
Launch the Wireless Mobile Utility.
4
When a connection is established, the LED on the wireless
mobile adapter will glow green and the main dialog for the
Wireless Mobile Utility will be displayed on the smart de-
vice. For information on taking pictures, see page 79. For in-
formation on viewing pictures, see page 84.
D
77
AꢀWPS
WPS (Wi-Fi Protected Setup) is a standard designed to make it easy
to establish a secure wireless network. For information on the steps
involved and the length of time the smart device will wait for a con-
nection, see the documentation supplied with the smart device.
AꢀManualꢀWirelessꢀConnections
1ꢀ Display Wi-Fi settings for the smart device.
2ꢀ Select the appropriate SSID (the default SSID begins with
“Nikon”). If you are using a wireless mobile adapter, the LED will
light green when a connection is established.
AꢀConnectionꢀStatus
Connection status is shown by an icon in the
home display:
•
•
ꢀ: Connection established.
ꢀ: No connection. Tap the icon to open the
smart device Wi-Fi settings menu and check
Wi-Fi settings.
DꢀTheꢀWirelessꢀMobileꢀAdapterꢀ(forꢀCamerasꢀWithoutꢀBuilt-inꢀWi-Fi)
While the adapter is inserted, the camera exposure meters will not
turn off; monitor the camera battery level to ensure that the cam-
era does not power off unexpectedly. In addition, some camera
menu items may be grayed out and unavailable and the camera
can not be used for playback or live view. Movie recording can
not be used.
D
78
TakingꢀPhotos
Take pictures remotely from the smart device, or take pictures
with the camera and save them to the smart device.
Remote Photography
Follow the steps below to take photos from the smart device.
Tap Take photos.
The camera viewfinder will go dark and the smart device
will display the view through the camera lens.
1
Tap the shutter icon.
2
The shutter will be released after you re-
move your finger from the icon and the
camera focuses; the resulting photo is
first saved to the camera memory card
and then downloaded to the smart de-
vice. There is no need to point the smart
device at the camera.
D
79
DꢀRemoteꢀPhotography
Remote photography ends automatically when the battery in the
camera or smart device runs low. Note that using remote pho-
tography for an extended period may cause the camera’s internal
temperature to rise; if necessary, remote photography will end au-
tomatically to minimize damage to camera circuits.
The smart device can not be used to adjust camera settings; use
camera controls to adjust settings before starting Step 1. Regard-
less of the release mode selected with the camera, only one picture
will be taken each time you tap the shutter icon. Note that the
display may not update smoothly depending on the device and
network conditions.
Regardless of the settings selected with the camera, pictures will be
taken in C (auto) mode using target finding autofocus. The focus
point is not displayed.
D
80
AꢀTheꢀRemoteꢀPhotographyꢀDisplay
Mode selection: Tap to select photo cap-
ture mode (compatible cameras only;
Settings: The following photography-
related options can be accessed from
the smart device menu:
• Remote shooting auto download:
Choose whether to download pictures
to the smart device after shooting (re-
mote shooting mode only).
• Self-timer: If ON is selected, the cam-
era shutter will be released 2 s after
you tap the shutter icon. The timer
turns off automatically after the shut-
ter is released.
Self-timer icon: Displayed when the self-
timer is on.
Camera settings: Shutter speed, aperture,
etc. Not displayed when device is in
landscape orientation.
Optical zoom: Tap T to zoom in, W to zoom
out.
Thumbnail area: Downloaded pictures.
D
81
Downloading Photos as They Are Taken
Take photos with any of the following cameras and save them to
the smart device: S6600, S6500 (firmware version 1.1), or S5200
(firmware version 1.1).
Tap Take photos.
1
Tap
.
2
The dialog shown below at right will be displayed (page 83).
D
82
Take photos.
3
Use the camera to frame and shoot photos. Photos are
downloaded to the smart device after being saved to the
camera memory card.
AꢀTheꢀPhotoꢀCaptureꢀDisplay
The photo capture display is shown below.
Mode selection: Tap
to select remote
Thumbnail area: Downloaded pictures.
D
83
ViewingꢀPhotos
Tap View photos to view the pictures stored on the smart de-
vice. You can also view the pictures on the camera memory card
and download selected images to the smart device.
Viewing Pictures
View the pictures in camera memory or on the smart device.
Tap View photos.
1
D
84
Choose a device.
2
Tap Pictures on camera to view the pictures on the camera
memory card, Pictures on smart device to view the pictures
stored on the smart device. The pictures will be displayed
as small“thumbnail”images (in some cases, a folder list may
be displayed; tap a folder to view the pictures it contains).
View pictures.
3
Tap a thumbnail to display the picture
full frame. You can then swipe left or
right to view additional pictures.
D
85
AꢀTheꢀFull-FrameꢀDisplay
The full-frame display is shown below.
Return to shooting
mode (available only
if display was accessed
by tapping thumbnail
in shooting display)
Tap picture to hide or
view icons
Zoom in or out
DꢀMovies
Movies can not be viewed using the Wireless Mobile Utility, but
movies can be played back by tapping the movie or playback icon
in the thumbnail list to display a list of movie apps and choosing
an app from the list.
D
86
AꢀFolders
Downloaded pictures are stored in folders with names consisting
of “C” (for new photos downloaded during shooting) or “D” (for ex-
isting pictures downloaded during playback) followed by the date,
an underscore, and a 3-digit folder number. A new folder is created
each time you launch the Wireless Mobile Utility and either cap-
ture new photos or download existing pictures. To view pictures in
other folders, tap the folder icon at the top of the display and tap a
folder to display its contents.
On the smart device, the path to folders created for new photos
downloaded during shooting is “/sdcard/Nikon_WU/Capture”, while
the path to those created for existing pictures downloaded during
playback is“/sdcard/Nikon_WU/Card”.
D
87
Downloading Existing Pictures
Download pictures from the camera memory card. Note that 3D
images are downloaded as 2D JPEG images.
Tap View photos.
1
Tap Pictures on camera.
Tap Pictures on camera to view the pictures on the camera.
2
D
88
Select pictures for download.
3
Tap a thumbnail to display the picture
full frame. You can then swipe left or
right to display the desired picture and
tap the check mark to select or deselect.
Press the back button on the smart de-
vice to return to the thumbnail list.
Alternatively, you can select multiple
pictures by touching and holding
a
thumbnail until check boxes are dis-
played at the top right corner of each
picture and then tapping thumbnails
to select or deselect. You can also tap
Select all in the smart device menu to
select all images or Deselect all to dese-
lect all images.
AꢀFolders
To select all images in a folder, tap the folder icon at the top of the
display and then touch and hold the folder in the folder list.
D
89
Tap Download.
4
If only one picture is selected, you will be
prompted to choose the size at which
the picture will be copied to the smart
q
w
device. Tap
(Download at [size]) to
q
download the picture at the size selected for Image size in
the Settings menu (page 97), or (Download at selected
w
size) to choose a size before download (page 97).
If multiple pictures are selected, a confirma-
tion dialog will be displayed; tap Down-
load to download the pictures at the
size selected for Image size in the Set-
AꢀImageꢀSize
Regardless of the size selected, pictures may sometimes be down-
loaded at their original size.
AꢀLocationꢀData
The options shown at right will be displayed if
Settings > Embed location data > Pictures
oncameraisenabled(page97).Note,however,
that location data from the smart device will
not be embedded in pictures downloaded
from the P7800.
DꢀDroppedꢀConnections
If the wireless connection is lost while a picture is being download-
ed, the picture will not be saved to the smart device (connection
loss may occur if, for example, the camera turns off during down-
load). Any pictures downloaded before the connection was inter-
rupted are unaffected.
D
90
Sharing Pictures
Before sharing pictures, connect to a network with Internet ac-
cess.
zzSharing Pictures One at a Time
Display the smart device menu.
1
Display a picture full-frame and tap the
menu button on the smart device to
view menu options.
Tap Share.
2
Tap Share and choose from a list of
picture-sharing apps and functions (the
specific contents of the list vary from de-
vice to device).
D
91
zzSharing Multiple Pictures
Display check boxes.
1
In the thumbnail list, touch and hold any
of the pictures you want to share until a
check mark is displayed in the top right
corner and check boxes appear on the
remaining images.
Select pictures.
2
Tap thumbnails to select or deselect.
You can also tap Select all in the smart
device menu to select all images or De-
select all to deselect all images.
Tap Share.
3
Tap Share and choose from a list of
picture-sharing apps and functions (the
specific contents of the list vary from de-
vice to device).
D
92
AꢀSharingꢀFolders
To share all pictures in a folder, tap the folder
icon at the top of the display to view folders,
then touch and hold a folder to select all the
pictures it contains. Selected pictures are in-
dicated by check marks and can be shared by
tapping Share as described in Step 3.
D
93
Deleting Pictures
Downloaded pictures can be deleted from the smart device one
at a time or in groups. The Wireless Mobile Utility can not be
used to delete pictures from the camera memory card.
zzDeleting Pictures One at a Time
Display the smart device menu.
1
Display a picture full-frame and tap the
menu button on the smart device to
view menu options.
Tap Delete.
Tap Delete.
2
A confirmation dialog will be displayed;
tap Yes.
D
94
zzDeleting Multiple Pictures
Display check boxes.
1
In the thumbnail list, touch and hold any
of the pictures you want to delete until a
check mark is displayed in the top right
corner and check boxes appear on the
remaining images.
Select pictures.
2
Tap thumbnails to select or deselect.
You can also tap Select all in the smart
device menu to select all images or De-
select all to deselect all images.
Tap Delete.
A confirmation dialog will be displayed;
3
tap Yes.
D
95
AꢀDeletingꢀFolders
To delete all pictures in a folder, tap the folder
icon at the top of the display to view folders,
then touch and hold a folder to select all the
pictures it contains. Selected pictures are in-
dicated by check marks and can be deleted by
tapping Delete as described in Step 3.
D
96
WirelessꢀMobileꢀUtilityꢀOptions
To access the options listed below, tap the
c icon at the top right corner of the display
or use the smart device menu in the Wireless
Mobile Utility home display.
Settings
Option
Description
Choose whether to synchronize the camera clock with
the smart device.
Synchronize clock
Remote photography will end automatically when the
Battery options camera or smart device battery reaches the selected
level.
Thumbnails
Choose the size of the thumbnails in the playback display.
Choose whether to embed smart device location data in
pictures not already containing location data provided
by the camera. Location data will not be embedded in
pictures downloaded from the P7800 or if the smart de-
vice is unable to acquire its current location.
Embed location
data
When downloading multiple images, select Recom-
mended size or VGA to copy images at sizes approximate-
ly equivalent to 1920 × 1080 or 640 × 480, respectively.
Image size
If ON is selected, the Wireless Mobile Utility will launch
App auto launch automatically when the smart device detects a signal
from the camera.
D
97
Option
Description
Wireless Mobile Adjust network settings for the wireless mobile adapter.
Adapter settings Not available with cameras featuring built-in Wi-Fi.
Choose an SSID for the wireless mobile adapter. The
SSID
smart device displays the SSID when you connect to
the network manually.
Authentication/ Choose the authentication method used for connection
encryption
Password
Channel
to the network.
Enter a password. The password type is selected using
Advanced settings > Password entry: choose ASCII for an
8- to 63-character alphanumeric password, HEX for a
64-digit hexadecimal password.
Choose the wireless channel used by the network.
Autoꢀpower-offꢀ Choose the delay before the wireless mobile adapter
delay
enters sleep when there is no wireless connection.
• WPS PIN: Set the wireless mobile adapter WPS PIN.
• WPS mode: Select the adapter WPS mode.
• Password entry: Choose the password type.
• Sub-net mask: Enter a subnet mask.
• DHCP server IP address: Enter the wireless mobile adapt-
er IP address.
Advancedꢀ
settings
• DHCP client IP address: Enter the smart device IP address.
Currentꢀsettings View current wireless mobile adapter settings.
Formatꢀsettings Tap Yes to restore default settings.
Choose the language in which the user interface for the
Wireless Mobile Utility is displayed.
Language
D
98
Info
Option
Description
Camera
The name of the camera currently connected.
View information about the wireless connection. The
serial number and firmware version are displayed
only if the camera is connected via the wireless mo-
bile adapter.
Wireless Mobile
Adapter
Link speed
View the transmission rate.
Serial number
View the product serial number.
Firmware version View the current firmware version.
Select About to view Wireless Mobile Utility ver-
sion information, Check for updates to connect to
the Google Play service and check for updates, or
License Terms and Conditions to view the terms of use
for this application.
App
Exit
Exit the Wireless Mobile Utility.
SB3L13(11)
6MWA1811-13
D
99
|
