NAD C515BEE User Manual

®
C 515BEE  
Compact Disc Player  
Owner’s Manual  
Manuel d’Installation  
Manual del Usuario  
Manuale delle Istruzioni  
Bedienungsanleitung  
Gebruikershandleiding  
Bruksanvisning  
Инструкция по эксплуатации  
IMPORTANT SAFETY INSTRUCTIONS  
19 damage requiring Service - Unplug this product from the wall outlet  
and refer servicing to qualified service personnel under the following  
conditions:  
fcc warning  
Changes or modifications not expressly approved by the party responsible  
for compliance could void the user’s authority to operate the equipment.  
a) When the power-supply cord or plug is damaged.  
b) If liquid has been spilled, or objects have fallen into the product.  
c) If the product has been exposed to rain or water.  
induStrY canada requirement  
This Class B digital apparatus meets all requirements of the Canadian  
Interference-Causing Equipment Regulations.  
d) If the product does not operate normally by following the operating  
instructions. Adjust only those controls that are covered by the  
operating instructions as an improper adjustment of other controls  
may result in damage and will often require extensive work by a  
qualified technician to restore the product to its normal operation.  
e) If the product has been dropped or damaged in any way.  
f) when the product exhibits a distinct change in performance-this  
indicates a need for service.  
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN  
AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER  
TO THE PRESENCE OF UNINSULATEDDANGEROUS VOLTAGE”  
WITHIN THE PRODUCT’S ENCLOSURE THAT MAYBE OF  
SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC  
SHOCK TO PERSONS.  
20 replacement parts - When replacement parts are required, be  
sure the service technician has used replacement parts specified  
by the manufacturer or have the same characteristics as the  
original part. Unauthorized substitutions may result in fire, electric  
shock, or other hazards.  
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS  
INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT  
OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN  
THE LITERATURE ACCOMPANYING THE APPLIANCE.  
21 Safety check - Upon completion of any service or repairs to this  
product, ask the service technician to perform safety checks to  
determine that the product is in proper operating condition.  
22 wall or ceiling mounting - The product should be mounted to a wall  
or ceiling only as recommended by the manufacturer.  
23 heat - The product should be situated away from heat sources such as  
radiators, heat registers, stoves or other products (including amplifiers)  
that produce heat.  
warning  
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS  
PRODUCT TO RAIN OR MOISTURE.  
The equipment draws its nominal non-operational power from the AC  
outlet with its POWER switch in the STANDBY position.  
The socket-outlet shall be installed near the apparatus and shall be easily  
accessible.  
caution  
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT,  
FULLY INSERT.  
caution  
Changes or modifications to this equipment not expressly approved by  
NAD Electronics for compliance could void the user’s authority to operate  
this equipment.  
caution  
The C 515BEE employs a Laser System. To ensure proper use of this product,  
please read this owner’s manual carefully and retain for future reference.  
Should the unit require maintenance, contact an authorized service  
location. Use of controls, adjustments or the performance of procedures  
other than those specified may result in exposure to laser radiation. To  
prevent direct exposure to laser beam, do not try to open the enclosure.  
Visible laser radiation when the enclosure is opened.  
caution regarding placement  
To maintain proper ventilation, be sure to leave a space around the unit  
(from the largest outer dimensions including projections) that is equal to or  
greater than shown below.  
Left and Right Panels: 10 cm  
do not Stare into beam.  
Rear Panel: 10 cm  
Top Panel: 50 cm  
fcc notice  
This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are  
designed to provide reasonable protection against harmful interference in a  
residential installation.  
This equipment generates, uses and can radiate radio frequency energy and if  
not installed and used in accordance with the instructions, may cause harmful  
interference to radio communications. However, there is no guarantee that  
interference will not occur in a particular installation. If this equipment does  
cause harmful interference to radio or television reception, which can be  
determined by turning the equipment off and on, the user is encouraged to try  
to correct the interference by one or more of the following measures  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from  
that to which the receiver is connected  
Consult the dealer or an experienced radio/TV technician for help.  
IMPORTANT SAFETY INSTRUCTIONS  
important information for uk cuStomerS  
noteS on environmental protection  
At the end of its useful life, this product must not be disposed  
DO NOT cut off the mains plug from this equipment. If the plug fitted is not  
suitable for the power points in your home or the cable is too short to reach  
a power point, then obtain an appropriate safety approved extension lead  
or consult your dealer. If, nonetheless, the mains plug is cut off, REMOVE  
THE FUSE and dispose of the PLUG immediately, to avoid possible shock  
hazard by inadvertent connection to the mains supply. If this product is  
not provided with a mains plug, or one has to be fitted, then follow the  
instructions given below:  
of with regular household waste but must be returned to a  
collection point for the recycling of electrical and electronic  
equipment. The symbol on the product, user’s manual and  
packaging, point this out.  
The materials can be reused in accordance with their markings. Through  
re-use, recycling of raw materials or other forms of recycling of old  
products, you are making an important contribution to the protection of  
our environment. Your local administrative office can advise you of the  
responsible waste disposal point.  
important  
DO NOT make any connection to the larger terminal which is marked with  
the letterEor by the safety earth symbol or colored GREEN or GREEN AND  
YELLOW.  
note: the c 515bee iS not an auto voltage cd plaYer.  
connect onlY to the preScribed ac outlet, i.e., 120v 60hz  
or 230v 50hz.  
The wires in the mains lead on this product are colored in accordance with  
the following code:  
BLUE – NEUTRAL  
BROWN – LIVE  
record Your model number (now, while You can See it)  
The model and serial number of your new C 515BEE are located on the  
back of the cabinet. For your future convenience, we suggest that you  
record these numbers here:  
As these colors may not correspond with the colored markings identifying  
the terminals in your plug, proceed as follows:  
The BLUE wire must be connected to the terminal marked with the  
letterNor colored BLACK.  
Model no. : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Serial no. : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
The BROWN wire must be connected to the terminal marked with the  
letterLor colored RED.  
When replacing the fuse, only a correctly rated and approved type should  
be used, and be sure to re-fit the fuse cover.  
if in doubt conSult a competent electrician.  
NAD is a trademark of NAD Electronics International, a division of Lenbrook Industries Limited  
Copyright 2007, NAD Electronics International, a division of Lenbrook Industries Limited  
INTRODUCTION  
table of contentS  
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
USING THE C 515BEE – CD 7 REMOTE CONTROL . . . . . . . . . . . . . . . . . .11  
NUMERIC KEY PAD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
REPEAT A-B. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
RANDOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
DIMMER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
TIME. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
INDEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
INTRODUCTION  
GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
UNPACKING AND SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6  
QUICK START . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6  
IDENTIFICATION OF CONTROLS  
FRONT PANEL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
REAR PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
CD 7 REMOTE CONTROL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
REFERENCE  
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1ꢀ  
NOTES ON DISCS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1ꢀ  
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1ꢁ  
OPERATION  
USING THE C 515BEE - FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10  
CD-R AND CD-RW AUDIO DISCS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
PLAYING MP3/WMA FILES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
PROGRAMMING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
thank You for chooSing nad.  
We encourage you to take a few minutes now to read right through this  
manual. Investing a little time here at the outset might save you a good  
deal of time later, and is by far the best way to ensure that you make the  
most of your investment in the C 515BEE.  
The C 515BEE CD Player is a technologically advanced and highly capable  
product – yet we have invested great effort in making it simple and easy  
to use. We have been careful to ensure that the C 515BEE is as musically  
transparent and spatially accurate as possible, incorporating much of  
what we’ve learned from a quarter-century’s experience designing audio  
and home-theater components. As with all our products, NAD’sMusic  
Firstdesign philosophy guided the C 515BEE’s design, such that it can  
confidently promise you both state-of-the-art and audiophile-quality music  
listening for years to come.  
One more thing: We urge you to register your C 515BEE ownership on the  
NAD Worldwide Web site:  
For warranty information contact your local distributor.  
5
INTRODUCTION  
getting Started  
UNPACKING AND SETUP  
what’S in the box  
QUICK START  
In case you simply cannot wait to experience the performance of your new  
NAD C 515BEE, we provide the followingQuick Startinstructions to get  
you underway.  
Packed with your C 515BEE you will find:  
An audio cable connector  
The CD 7 remote control with 2 (two) AAA batteries  
This owner’s manual  
Please make all the connections to your C 515BEE with the unit unplugged.  
It is also advisable to power-down or unplug all associated components  
while making or breaking any signal or AC power connections.  
Save the packaging  
Please save the box and all of the packaging in which your C 515BEE  
arrived. Should you move or otherwise need to transport your C 515BEE,  
this is by far the safest container in which to do so. We’ve seen too many  
otherwise perfect components damaged in transit for lack of a proper  
shipping carton, so please: Save that box!  
plaY a cd  
1
Connect a twin RCA-to-RCA lead from the L (left) and R (right) Line  
Output jacks to the corresponding CD inputs on your amplifier.  
Plug in the AC power cord.  
Press the POWER button to turn ON the player.  
Press [OPEN/CLOSE] to open the disc drawer.  
Place a CD, label side up, in the tray’s circular recess. Be certain that the  
disc is centered within the recess.  
2
3
4
5
chooSing a location  
Choose a location that is well ventilated (with at least several inches to  
both sides and behind), and that will provide a clear line of sight, within  
25 feet/8 meters, between the C 515BEE’s front panel and your primary  
listening/viewing position. This will ensure reliable infrared remote control  
communications. The C 515BEE generates a modest amount of heat, but  
nothing that should trouble adjacent components. It is perfectly possible to  
stack the C 515BEE on top of other components.  
6
7
8
Press [PLAY]. The drawer closes automatically, and the disc begins to  
play.  
At any time you may press [SKIP  
the disc.  
Press [PAUSE] if you want to stop play temporarily while keeping the  
pickup at its current position on the disc. Press [PAUSE] again or [PLAY]  
when you want to resume playback. Press STOP if you want to end play  
and reset the pickup to the beginning of the disc.  
or  
] to select different tracks on  
note on inStallation  
IMPORTANT! Install the C 515BEE Compact Disc player on a level, vibration-  
free surface. Severe vibration or operation in a tilted position may cause  
the player to mis-track. The player may be stacked with other stereo  
components, as long as there is adequate ventilation around it. If the  
C 515BEE is placed in close proximity to a radio tuner (AM or FM), a VCR or  
a television set, the operation of its digital circuits may produce static that  
would interfere with reception of weak broadcast signals. If this occurs,  
move the C 515BEE away from other devices or switch it off when viewing  
or listening to broadcasts.  
6
IDENTIFICATION OF CONTROLS  
front panel  
1
2
5
6
7
8
3
4
9
10  
1
power: Press this button to switch ON the C 515BEE. The Standby  
LED indicator will turn from amber to blue and illuminate the Vacuum  
Fluorescent Display (VFD). Pressing the power button again turns the  
unit back to standby mode.  
6
7
plaY: Press to start play or to resume play after Pause. If the disc tray  
is open, press this button to automatically close the tray and start  
playback if a disc is loaded.  
pauSe: During playback, press this button to stop playback  
temporarily, keeping the optical pickup at its current position on the  
disc. To resume playback at the exact point where it stopped, press  
[PLAY] or [PAUSE] again.  
The C 515BEE can also be switched ON from standby mode by pressing  
[OPEN/CLOSE] or [PLAY] button on the front panel as well as on the  
remote control.  
If the disc tray is open and the C 515BEE is powered OFF, the disc tray  
will draw close and the unit powered OFF.  
8
Stop: Press the [STOP] button once to stop playback and re-set the  
pickup to the beginning of the disc. The display reverts to showing the  
number of tracks and total playing time on the disc. If the C 515BEE  
was programmed to play a selection of tracks, the program will be  
retained in the player’s memory.  
2
3
indicator: This indicator will light up amber when the C 515BEE is  
in standby state. When the C 515BEE is at ON state, this indicator will  
illuminate blue.  
Pressing [STOP] twice at program mode will delete the program.  
diSc traY: With the DISC TRAY open, insert a CD or other compatible  
media disc face down onto the tray.  
9
open/cloSe: Press this button to open and close the disc tray. When  
in standby, this button will also power ON the C 515BEE and at the  
same time open the disc tray.  
“No Discappears on the C 515BEE’s VFD if the disc is placed upside  
down.  
10 Skip/Scan: Press  
to skip forward or  
to skip backward a track  
4
5
remote SenSor: Point the CD 7 at the remote sensor and press the  
buttons. Do not expose the remote sensor of the CD 7 to a strong light  
source such as direct sunlight or illumination. If you do so, you may not  
be able to operate the C 515BEE with the remote control.  
or file.  
Press and hold  
down a track. The SCAN  
backwards through the recording at high speed. The SCAN  
causes the optical pickup to scan rapidly forward through the music.  
or  
for more than 2 seconds to search up or  
button causes the optical pickup to scan  
button  
distance: About 23ft (7m) from the front of the remote sensor.  
angle: About 30o in each direction of the front of the remote sensor.  
vfd: The Vacuum Fluorescent Display (VFD) provides playback  
information, settings and other indicators.  
7
IDENTIFICATION OF CONTROLS  
rear panel  
3
1
2
ATTENTION!  
Please make sure that the C 515BEE is powered off or unplugged before making any connections. It is also advisable to power-down or unplug all  
associated components while making or breaking any signal or AC power connections.  
1
2
line out: Connect to the corresponding analog audio input of an  
amplifier, receiver or stereo system.  
3
ac power cord: Plug the AC power cord into a live AC wall socket.  
Make sure all connections have been made before connecting to the  
mains.  
digital out (coaxial, optical): Connect the optical or coaxial  
digital OUT ports to the corresponding S/PDIF digital input of an  
amplifier, receiver, computer soundcard or other digital processors.  
8
IDENTIFICATION OF CONTROLS  
cd 7 remote control  
ON – Switches CD Player ON.  
OFF – Switches CD player OFF.  
PROGRAM – Enter or exit program mode.  
DELETE - Clears programmed track.  
TIME – Toggle to show timer and information  
details of the current track or MP3/WMA file.  
RANDOM – Play tracks in random mode.  
REPEAT – Repeat track, file or whole disc.  
RPT A-B – Repeat sequence.  
DIMMER – Toggle to reduce, turn off or restore  
VFD brightness.  
FOLDER – Toggle between folder lists.  
FILE – Scroll through WMA or MP3 files.  
ENTER – Starts playback of MP3 or WMA file.  
STOP – Stops playback.  
OPEN – Opens and closes disc tray.  
PAUSE – Pauses playback temporarily.  
SKIP  
SKIP  
– Go to next track or file.  
– Go to beginning of current track/file  
or to previous track/file.  
0 to 9 number buttons – Direct-entry of track  
or file number.  
SCAN  
SCAN  
– Press for fast forward search.  
– Press for fast reverse search.  
PLAY – Starts playback.  
INDEX – Playback can be started from any  
desired index number  
Press in and lift tab to remove battery cover out  
of recess.  
Press batteries into opening. Ensure correct  
fitting is observed.  
Replace battery cover by aligning and inserting  
the two tabs into the holes. Press battery cover  
into place untilclicksclosed.  
9
OPERATION  
uSing the c 515bee - featureS  
CD-R AND CD-RW AUDIO DISCS  
NOTES  
The C 515BEE can play back CD-R or CDRW audio discs that have been  
recorded on a computer or CD recorder. The quality of CD-R, CD-RW audio  
discs varies widely which may affect playability. Some factors that affect  
playability:  
The procedure for programming MP3/WMA files is the same as above  
with an exception at step 2 and 3 – the total number of programmed  
files and total playback time will not be displayed during programming.  
If you want to select file number “9” in a disc where there are 100 or more  
MP3/WMA files, press “0” twice and then “9.”  
Pressing STOP key at any time during the programming procedure will  
put to a STOP the sequence and clear all the currently programmed  
tracks or files. VFD will revert back to displaying the total number of  
tracks and total playback time for audio CD and total number of files for  
MP3/WMA.  
The quality of the disc itself. Generally speaking, CD-R, CD-RW blanks  
from well-renowned companies give better results than unbranded  
ones.  
The quality of CD-recorder or computer CD re/writer. Some recorders  
and writers produce better results than others.  
The CD-R and CD-RW were created with high-speed writing. In general,  
the quality of a CD-R or CD-RW is better when produced at a lower  
speed against a higher speed on the same recorder or re/writer.  
Pressing STOP key twice during program playback will result to having  
the whole program list deleted.  
PLAYING MP3/WMA FILES  
review / edit program liSt  
The C 515BEE can play MP3/WMA formatted recordings on CD-R or CD-RW  
discs. You may mix any of the file types on the disc. Using the CD 7 remote  
control, one can select through the MP3/WMA folders and files as well as  
start playback through the following steps  
1
Initiate review or edit of your program entries through either of the  
following initial steps  
If you are still in programming mode, press [PROGRAM].  
If during program playback, press [STOP] once then [PROGRAM].  
1
2
3
Load the applicable disc.  
2
3
The VFD will show the first Program Number and the corresponding  
“blinkingprogrammed track.  
To change the programmed track of a particular sequence, use the  
Press [FOLDER  
Press [FILE  
] to select desired folder. Press [ENTER].  
] to select desired file number. You must be at STOP or  
playback mode to access both folders.  
Direct-Entry numeric keypad buttons. Press [SKIP  
or  
] to move  
4
Press [ENTER] to start playback. For each file type being played, the  
C 515BEE will display the file type at the VFD and a corresponding icon  
at the VFD. Information about the Song Title, Album and Artist name, if  
available, will scroll through the VFD during playback.  
forward or backward the programmed tracks as well as review the list  
and change if so desired.  
If you want to delete a particular program sequence during program  
review, press [DELETE] key.  
After finalizing your program changes or completing your review, press  
[PROGRAM] again.  
4
5
NOTES  
The file number is recognized per disc, not per folder – that is, the  
number assigned to each file corresponds to their sequence in the disc.  
If you want to select file number “9” in a disc where there are 100 or more  
MP3/WMA files, press “0” twice and then “9.”  
program plaYback  
1
To play the stored program, press [PLAY] while you are inPROGRAM”  
mode. “PROGicon will appear in the display, indicating that a stored  
program is being played. During Program Play, the SKIP buttons will  
access only the tracks in the program list.  
PROGRAMMING  
The program function enables you to store your favorite tracks from any  
disc in the player memory. When programming a sequence of tracks, the  
C 515BEE must be in STOP mode. Using the CD 7 remote control, enter your  
desired program sequence through the following steps  
2
If you want to play only a portion of a stored program, initiate play and  
press SKIP to jump over the programmed tracks that you don’t want to  
hear.  
1
Press [PROGRAM]. The display indicatesP01 T00. The00in theT00”  
keeps on blinking, meaning that the player is awaiting the first Program  
entry.  
Use the Direct-Entry numeric keypad buttons to enter the first track  
in your planned sequence. Upon entering the track number, the VFD  
will briefly show the total number and total time of the currently  
programmed tracks like“TTL 01 3:25.  
The display will revert to showP02 T00,indicating that the player is  
ready for your second program entry. Upon entering the second track,  
the VFD will again briefly show the total number and total time of the  
currently programmed tracks like “TTL 02 6:45–“TTL 02”indicates that  
there are now a total of two programmed tracks and6:45is the total  
playback time of both programmed tracks.  
Repeat steps 2 and 3 to select and store other track numbers in  
memory, up to a maximum of 40 entries. If you attempt to program  
more than 40 tracks or files, “P-FULLwill be displayed in the VFD.  
Press [PROGRAM] to end or finalize the program – the VFD will show the  
last programmed number and track.  
Stop or delete program  
1
To terminate Program play, press [STOP] once. The stored track list  
remains in memory. If you want to play the program again, simply press  
[PLAY].  
2
2
To clear the program memory, perform any of the following steps  
Press [STOP] twice during program playback.  
Press [OPEN] to open the disc tray.  
Switch OFF the power.  
3
4
5
6
Press to start program playback.  
10  
OPERATION  
uSing the cd 7 remote control  
A wireless remote control is provided with your compact disc player,  
enabling you to operate playback functions from the comfort of your chair  
or from virtually anywhere in the room. For reliable operation there should  
be a clear line-of-sight path from the remote control to the front of the CD  
player. If the player does not respond to remote commands, it may be that  
this line-of-sight path is obstructed by clothing, paper, or furnishings.  
TIME  
Toggle to display the following disc information during playback.  
INFORMATION  
AUDIO CD  
CD TEXT  
MP3/WMA  
Elapsed time of the  
current track  
-
Remaining time of the  
current track  
-
-
Most of the buttons on the remote control handset have the same effect as  
the corresponding buttons on the front panel of the player. In addition, the  
handset is equipped with some extra buttons like the following function  
keys.  
Total playback time of  
the disc  
Remaining time of the disc  
Disc title  
-
-
-
NUMERIC KEY PAD  
Track name  
-
-
Using the direct-entry numeric keypad (0 to 9) causes the C 515BEE to jump  
directly to the beginning of a numbered track and commence play. Thus, to  
play Track 5, simply press5. To play Track 20, press2and0.  
Artist name  
-
Song title  
-
Elapsed time of the  
current file  
-
-
-
-
REPEAT  
Remaining time of the  
current file  
To repeat the playback of a particular track or file, press the CD 7’s [REPEAT]  
key once. Toggle the [REPEAT] key to repeat all the tracks, files, folder  
(blinking) or until repeat mode is turned OFF.  
File name  
Album name  
Year  
-
-
-
-
-
-
-
-
REPEAT A-B  
To repeat a sequence, implement the following procedures:  
Comment  
1
2
Press [RPT A-B] at your chosen starting point.  
Press [RPT A-B] again at your chosen end point. The repeat sequence  
begins.  
NOTES  
Some information may not be displayed on some discs. Display is  
dependent on the disc’s information content.  
3
Press [RPT A-B] again to cancel the sequence.  
Information about the Song Title, Album and Artist name, if available,  
will scroll through the VFD during playback.  
RANDOM  
Press [RANDOM] key during playback or stop mode. Playback of the first  
randomly selected track or file automatically begins. A corresponding  
“RANDOMicon is illuminated at the VFD. Press [RANDOM] again to return  
to normal playback.  
If the file has no available information about the artist or album, the  
display will show “No artist” or “No album.  
For audio CD, the default information display is the elapsed time of the  
current track.  
DIMMER  
INDEX  
Toggle to reduce, turn off and restore VFD brightness.  
The index system is a method of subdividing tracks into smaller divisions for  
easier location of those parts. If a disc includes index numbers, playback can  
be started from any desired index number through the following steps  
1
2
Press [INDEX] during playback.  
Using the numeric buttons, press the desired index number - for  
example0and3. The VFD will showINDEX 03 TR10with03the  
entered index number.  
3
To revert to normal display information, press [INDEX] again.  
11  
REFERENCE  
troubleShooting  
condition  
poSSible cauSeS  
poSSible SolutionS  
No power.  
The power cord is disconnected.  
Plug the power cord into the wall outlet  
securely.  
The power is on, but the C 515BEE does  
not work.  
No disc is inserted.  
Insert a disc.  
The C 515BEE does not start playback.  
The disc is loaded upside down.  
The disc is too dirty.  
Reload the disc with the label side UP.  
Clean the disc.  
No sound.  
The equipment connected with the audio  
cable is not set to receive CD signal output.  
Select the correct input mode of the audio  
receiver so you can listen to the sound from  
the C 515BEE.  
The power of the equipment connected with  
the audio cable is turned off.  
Turn on the equipment connected with the  
audio cable.  
Sound skips.  
The C 515BEE is subject to vibration or physical  
shock from external sources.  
Change the installation location.  
The remote control does not work properly.  
The remote control is not pointed at the  
remote sensor on the CD player.  
Point the remote control at the remote  
sensor of the CD player.  
The remote control is too far from the CD  
player.  
Operate the remote control closer to the  
CD player.  
The remote control batteries are dead.  
Replace the remote control batteries.  
noteS on diScS  
handling diScS  
cleaning diScS  
Do not touch the playback side of the disc. Hold the disc by the edges so that  
fingerprints do not get on the surface. Never stick paper or tape on the disc.  
Fingerprints and dust on the disc can cause poor picture quality and sound  
distortion. Before playing, clean the disc with a clean cloth. Wipe the disc  
from the center out.  
Storing diScS  
After playing, store the disc in its case. Do not expose the disc to direct  
sunlight or sources of heat and never leave it in a parked car exposed to  
direct sunlight.  
Do not use strong solvents such as alcohol, benzine, thinner, commercially  
available cleaners, or anti-static spray intended for older vinyl records.  
1ꢀ  
REFERENCE  
SpecificationS  
SYSTEM  
Output level  
Frequency response (ref. 0dB 20Hz-20kHz)  
Total harmonic distortion (ref. 1kHz)  
Signal/Noise ratio (A-weighted, ref. 1kHz)  
Channel balance (ref. 0dB 1kHz)  
Dynamic range  
2.2V  
+ 0.5dB  
<0.003%  
110dB  
+ 0.5dB  
95dB  
Channel separation  
95dB (1kHz)  
95dB (10kHz)  
-4.53 + 0.5dB (5kHz)  
-9.04 + 0.5dB (16kHz)  
+ 0.01dB (0 to -60dB)  
De-emphasis (ref. 0dB)  
Linearity (ref. 0dB)  
PHYSICAL SPECIFICATIONS  
Dimensions (W x H x D)  
435x60x241mm (Net)  
435x65x249mm (Gross)  
3.52kg  
Net weight  
Shipping weight  
4.7kg  
Note: Gross dimensions include feet, extended buttons and rear panel terminals.  
information about C 515BEE.  
1ꢁ  
©2007 nad electronicS international  
a diviSion of lenbrook induStrieS limited  
All rights reserved. No part of this publication may be reproduced, stored or transmitted in any form without the written permission of NAD Electronics International  
C 515BEE Manual 09/07  

Marantz SA8400 User Manual
Kyocera E3500 User Manual
Kenwood KDC BT8041U User Manual
Kenwood KDC 3029 User Manual
Jwin JL CD808 User Manual
Grindmaster GPOD User Manual
Fujitsu Computer Drive M8000 User Manual
Elta 4258MP3 User Manual
Dell 650 User Manual
APC Net Botz NBES0308 User Manual