i876
User’s Guide
IMPORTANT NOTICE: PLEASE READ
PRIOR TO USING YOUR PHONE
The SIM card provided in this kit is intended for use
with the phone provided in this package.
Loss of certain features will result when using a SIM
card from one of the following models: i30sx, i35s,
i50sx, i55sr, i58s, i60c, i80s, i85s, i88s, i90c, i95cl
series, and the i2000 series.
For more information on SIM card compatibility, go to
www.motorola.com/iden.
Defects or damage to your Motorola phone that result
from the use of non-Motorola branded or certified
Accessories, including but not limited to replacement
housings and or other peripheral accessories, are
excluded from warranty coverage. Please refer to the
text of Motorola's Limited One Year warranty located
in this user’s guide for complete details.
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
DECLARATION OF CONFORMITY
Per FCC CFR 47 Part 2 Section 2.1077(a)
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation.
Responsible Party Name: Motorola, Inc.
Address: 8000 West Sunrise Boulevard
Plantation, FL 33322 USA
Phone Number: 1 (800) 453-0920
If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is encouraged to
try to correct the interference by one or more of
the following measures:
Hereby declares that the product:
Product Name: i876
Model Number: H92XAH6RR4AN
Conforms to the following regulations:
FCC Part 15, subpart B, section 15.107(a),
•
Reorient or relocate the receiving antenna.
15.107(d) and section 15.109(a)
•
Increase the separation between the equipment and
receiver.
Class B Digital Device
As a personal computer peripheral, this device
complies with Part 15 of the FCC Rules.
Operation is subject to the following two
conditions: (1) this device may not cause
•
•
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
HELLOMOTO
Introducing your new Motorola i876 wireless phone. Here’s a quick anatomy lesson.
Left Soft Key
Perform function
in lower left
Right Soft Key
Perform function
in lower right
display.
Smart Key
display.
Speaker On/Off
Key
Camera Key
Volume Keys
Camera
Camera
Lens
Spotlight
Menu Key
From home screen,
open main menu.
End/Power Key
End calls, exit
menu system,
turns phone
on/off.
Volume
Buttons
PTT
Talk Key
Make &
answer calls.
Button
Memory Card Slot
Speaker
Audio Jack
OK Key
In menus & lists,
press to select
highlighted option.
4-Way
Navigation Key
Mini USB Connector
Connects charger
and accessories
1
check it out
Home Screen
Main Menu
READY
4/25/07
Customizable O key
that can be used to
to open the
Press the Navigation Key
3
4
2
1
Recent Calls
up, down, left or right
(
)
04
B
05pm
BLeqjpTmG
to highlight a menu feature.
More
Exit
Settings screen
Press the Okey
to select.
Press and hold the
Power Key E for a
few seconds, or until
the screen lights up,
to turn on your
phone.
2
Motorola, Inc.
functionality of such features may be limited in certain devices, or
by certain wireless carriers. Contact your wireless carrier about
feature availability and functionality.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196
OPEN SOURCE SOFTWARE INFORMATION
www.hellomoto.com
You may choose to obtain a copy of any source code being made
publicly available by Motorola directly from the Motorola website
opensource.motorola.com.
1-800-331-6456 (United States)
1-888-390-6456 (TTY/TDD United States for hearing impaired)
1-800-461-4575 (Canada)
Additionally, for instructions on how to obtain a copy of any source
code being made publicly available by Motorola related to
software used in this Motorola mobile device, please send your
request in writing to:
Product Support: www.motorola.com/iden
Certain mobile phone features are dependent on the capabilities
and settings of your service provider’s network. Additionally,
certain features may not be activated by your service provider,
and/or the provider's network settings may limit the feature’s
functionality. Always contact your service provider about feature
availability and functionality. All features, functionality, and other
product specifications, as well as the information contained in this
user's guide are based upon the latest available information and
are believed to be accurate at the time of printing. Motorola
reserves the right to change or modify any information or
specifications without notice or obligation.
MOTOROLA, INC.
OSS Management
600 North US Hwy 45
Libertyville, IL 60048
USA.
Motorola has created the www.opensource.motorola.com
to serve as a portal for interaction with the software community-
at-large.
This device supports Bluetooth 2.0 including EDR and A2DP Stereo
profiles. In order for Bluetooth devices to communicate with one
another, they must utilize the same Bluetooth profile. To determine
the profiles supported by other Motorola devices, visit
www.hellomoto.com/bluetooth. For other devices, contact their
respective manufacturer.
To see additional information regarding licenses,
acknowledgments and required copyright notices for open source
packages used in this Motorola mobile device, follow these
instructions:
From the phone Main Menu, select Games and Apps.
>
OpenSourceNotices.
Certain Bluetooth features including those listed may not be
supported by all compatible Bluetooth-enabled devices, and/or the
3
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. All other product or service names are
the property of their respective owners. Java and all other Java-
based marks are trademarks or registered trademarks of Sun
Microsystems, Inc. in the U.S. and other countries.
© Motorola, Inc., 2007.
Manual Number: NNTN7280B
Software Version: AP: DB2.00.42, BP: DB3.00.42
CP Version: 38.04.03
USR Version: U00A.00.00
Electrical Requirements:
Lithium Ion Battery 3.7V
Power Adapter: 100-240V ~ 50-60Hz, 0.3A
Output of the Adapter: 5V 850mA
4
contents
check it out . . . . . . . . . . . 2
menu map. . . . . . . . . . . . 7
Use and Care . . . . . . . . . 9
Private ID . . . . . . . . . . 22
text messages . . . . . . 22
manage memory . . . . 25
use your phone as USB
mass storage device . 26
using your handset
basics. . . . . . . . . . . . . . . 75
display . . . . . . . . . . . . 75
main menu . . . . . . . . . 76
text entry . . . . . . . . . . 76
navigation key. . . . . . . 79
handsfree speaker . . . 79
transmitters . . . . . . . . 79
use GPS with map
software . . . . . . . . . . . 80
features for the
hearing impaired. . . . . 82
features for the
essentials . . . . . . . . . . . 10
about this guide . . . . . 10
SIM card. . . . . . . . . . . 11
memory card . . . . . . . 11
battery . . . . . . . . . . . . 13
turn it on & off . . . . . . 17
enable security . . . . . . 17
make a phone call. . . . 18
answer a phone call . . 18
make a private call . . . 18
answer a private call. . 20
store a phone
as a modem . . . . . . . . 27
main attractions. . . . . . 29
music player . . . . . . . . 29
media center . . . . . . . 36
camera . . . . . . . . . . . . 39
PTV features. . . . . . . . 43
one touch PTT . . . . . . 51
PT manager . . . . . . . . 53
MMS . . . . . . . . . . . . . 53
bluetooth® . . . . . . . . . 69
clock screen saver . . . 73
vision impaired . . . . . . 83
calls . . . . . . . . . . . . . . . . 85
turn off a call alert. . . . 85
recent calls . . . . . . . . . 85
redial. . . . . . . . . . . . . . 86
caller ID . . . . . . . . . . . 86
number or private ID . 20
call a stored phone
number or private ID . 21
contents
5
call forward . . . . . . . . 86
voice names . . . . . . . 87
emergency calls . . . . 88
international calls. . . . 88
speed dial . . . . . . . . . 89
voicemail . . . . . . . . . . 89
selective dynamic
memory card . . . . . . 106
personalize . . . . . . . 107
TTY . . . . . . . . . . . . . 107
security . . . . . . . . . . 108
Safety and General
Information . . . . . . . . 110
Privacy and
Smart Practices While
index. . . . . . . . . . . . . . 130
group (SDG) calls. . . . 90
Service & Repairs . . . 115
customize. . . . . . . . . . . 95
volume. . . . . . . . . . . . 95
ring tones . . . . . . . . . 95
wallpaper. . . . . . . . . . 97
datebook . . . . . . . . . . 97
hide or show
Specific Absorption
Rate Data . . . . . . . . . . 116
LimitedWarrantyMotorola
Communications Products
(International) . . . . . . 118
Hearing Aid
Compatibility. . . . . . . 122
Information From the
World Health
Organization . . . . . . . 124
location information. . 98
other features . . . . . . 100
advanced calling . . . 100
alarm clock . . . . . . . 101
contacts. . . . . . . . . . 102
datebook . . . . . . . . . 103
GPS . . . . . . . . . . . . . 104
handsfree . . . . . . . . 105
Patent and Trademark
Information . . . . . . . . 126
contents
6
menu map
main menu
B
L
Recent Calls
T
Games and Apps
•
•
GPS
•
•
•
Position
Privacy
•
•
•
•
•
Buy More
Contacts
Alarm Clock Plus
Audio Player
Interface
•
•
[New Contact]
[New SDG List]
Datebook
Photo Editor
OpenSourceNotices
•
•
•
•
•
•
Last Call
Phone Reset
Phone Lifetime
Prvt/Grp Reset
Prvt/Grp Lifetime
Kbytes Reset
E
Messages
•
•
•
•
•
•
•
[Create Message]
m
Tools
•
Voice Mail
Inbox
My Info
•
•
•
•
•
•
•
•
My Name
Line 1
Drafts
Sent Items
Net Alert
Text Msg
Line 2
•
•
Call Timers
Private ID
Group ID:
Carrier IP
IP1 Address
IP2 Address
•
•
•
•
•
•
Last Call
Phone Reset
Phone Lifetime
Prvt/Grp Reset
Prvt/Grp Lifetime
Kbytes Reset
1
j
Web
Multimedia
•
Profiles
•
•
•
•
•
Media Center
•
•
•
•
•
•
•
•
•
[New Profile]
Standard
Car
Memo
Camera
Audio Player (Music Player)
Ring Tones
VoiceRecord
u
Settings
(see next page)
•
Meeting
Office
p
Push To Talk
Outdoors
Headset
PRVT Only
CNTCS Only
This is the standard main menu layout. Your
phone’s menu may be a little different.
•
•
•
•
Call Alert
PT Manager
Quick PTT
PTT Options
•
•
Alarm Clock Plus
Bluetooth
•
•
•
•
•
Audio Devices
Pair to Devices
Device History
Setup
Find Me
menu map
7
settings menu
Display/Info
Phone Calls
Voice Playback
•
Wallpaper
•
•
•
•
•
•
•
•
•
•
•
•
•
Set Line
•
•
•
•
Speak Text
Speak Caller
Voice
•
•
•
[Buy More]
Any Key Ans
Auto Redial
Call Waiting
Auto Ans
Flip Activation
Minute Beep
Call Duration
TTY
Hearing Aid
Notifications
DTMF Dialing
Call Forward
Internal
External
Text Size
Theme
Multimedia Volume
•
•
Memory Card
•
•
Store Media
Help
•
•
•
•
Option 1
Option 2
Onyx
Security
•
•
•
•
•
Phone Lock
High Contrast
Keypad Lock
SIM PIN
•
•
Home Icons
Backlight
GPS PIN
Change Passwords
•
Timer
•
Java Timer
Sensor
Personalize
•
Advanced
•
•
•
•
•
•
•
•
•
•
Reorder Menu
•
Logo Flash
PTT Backlight
•
•
•
•
•
•
•
Alert Timeout
Shortcuts
Up Key
•
Headset/Spkr
Connectivity
Reset Defaults
Return to Home
Transmitters
Phone Only
•
•
Clock
Down Key
Left Key
Right Key
Center Key
Left Softkey
Right Softkey
Power Up
•
•
•
•
•
Display: On/Off
Screen Saver
Time Format
Date Format
Year
Connections
Menu View
•
•
Bluetooth
•
•
•
Icon View
List View
Tab View
USB
Volume
•
•
•
•
•
Memory Card Access
Data Modem
Application Access
GPS NMEA
•
•
•
•
•
Ringers/Alerts
Speaker
Earpiece
Multimedia
Keypad
•
•
Large Dialing: On/Off
Language
Help
menu map
8
Use and Care
Use and Care
To care for your Motorola phone, please keep it away from:
liquids of any kind
dust and dirt
Don’t expose your phone to
water, rain, extreme humidity,
sweat, or other moisture.
Don’t expose your phone to
dust, dirt, sand, food, or other
inappropriate materials.
extreme heat or cold
cleaning solutions
Avoid temperatures below
-10°C/14°F or
above 45°C/113°F.
To clean your phone, use only a
dry soft cloth. Don’t use alcohol
or other cleaning solutions.
microwaves
the ground
Don’t try to dry your phone in a
microwave oven.
Don’t drop your phone.
Use and Care
9
essentials
Caution: Before using the phone for the first
time, read the Important Safety and Legal
information included in the gray-edged pages
at the back of this guide.
2
Press the navigation key
Phone Calls, and press the center key
select it.
to scroll to
r
to
symbols
This means a feature is network or
subscription dependent and may
not be available in all areas, or is not
offered by your service provider.
Contact customer service for more
information.
about this guide
This guide shows how to locate a menu
feature as follows:
Find it:
M
>
u
>
Phone Calls
This means that, from the home screen:
This means a feature requires an
optional accessory.
1
Press the menu key
Settings menu.
M
to open the
essentials
10
Warning: To avoid loss or damage, do not
remove your SIM card from your phone
unless absolutely necessary.
SIM card
insert the SIM card
Turn off your phone and remove your battery
before you install or remove a SIM card.
memory card
Your handset comes with a memory
card, memory card adapter, and memory card
reader1.
Carefully slide the SIM card into your phone,
until it lies flat in the SIM card holder.
A memory card is a removable flash memory
card that you can use to store pictures,
videos, and audio files. The memory card can
be inserted in your phone or connected to
your computer using the memory card reader.
Many types of pictures, videos, and audio
files stored on the memory card can be
1. Depending on your service provider, the memory card,
memory card adapter, and memory card reader may not
be included with your phone. Your handset can be used
with a Transflash or MicroSD memory card.
essentials
11
viewed or played using your phone’s media
center. Music files can be played using the
music player.
2
Slide in the memory card until it clicks into
place.
You can connect your phone using a
Motorola data cable directly to your
computer, access the memory card
loaded in the phone to save or delete music,
images, videos, or audio files.
Find it:
M
>
u
>
Connections > USB
insert the memory card
Note: The first time you insert a memory card
in your phone, you will see the following
1
Slide open the memory card slot cover.
options: [Do Nothing] Go To Music Player, Go To Camera,
,
and Go To Media Center. Select the option of your
choice and continue.
Warning: Do not remove the memory card
before selecting the Remove Card option under
Settings. Removing the memory card before
selecting the Remove Card option could result in
loss of data.
essentials
12
Battery or Unable to Charge, take the
following steps:
battery
•
Remove the battery and inspect it to
confirm that it bears a Motorola
“Original Equipment” hologram;
Battery Use & Battery Safety
•
Motorola recommends you always
use Motorola-branded batteries and
chargers. The warranty does not cover
damage caused by non-Motorola
batteries and/or chargers.
•
•
•
If there is no hologram, the battery
is not a qualified battery;
If there is a hologram, replace the
battery and retry charging it;
Caution: Use of an unqualified battery
or charger may present a risk of fire,
explosion, leakage, or other hazard.
Improper battery use, or use of a
damaged battery, may result in a fire,
explosion, or other hazard.
If the message remains, contact a
Motorola Authorized Service Center.
•
•
New batteries or batteries stored for a
long time may take more time to
charge.
•
•
Battery usage by children should be
supervised.
Charging precautions: When
charging your battery, keep it near
room temperature. Never expose
batteries to temperatures below 0°C
(32°F) or above 45°C (113°F) when
charging. Always take your mobile
Important: Motorola mobile devices
are designed to work best with
qualified batteries. If you see a
message on your display such as Invalid
essentials
13
device with you when you leave your
vehicle.
appliance or heat source, such as a hair
dryer or microwave oven.
•
•
When storing your battery, keep it in a
cool, dry place.
•
Use care when handling a charged
battery: Particularly when placing it
inside a pocket, purse, or other
container with metal objects. Contact
with metal objects (e.g., jewelry, keys,
beaded chains) could complete an
electrical circuit (short circuit), causing
the battery to become very hot, which
could cause damage or injury.
It is normal over time for battery life to
decrease, and for the battery to exhibit
shorter runtime between charges or
require more frequent or longer
charging times.
•
Avoid damage to battery and mobile
device. Do not disassemble, open,
crush, bend, deform, puncture, shred,
or submerge the battery or mobile
device. Avoid dropping the battery or
mobile device, especially on a hard
surface. If your battery or mobile
device has been subjected to such
damage, take it to a Motorola
Promptly dispose of used batteries in
accordance with local regulations.
Contact your local recycling center for
proper battery disposal.
Warning: Never dispose of batteries in a fire
because they may explode.
Authorized Service Center before
using. Do not attempt to dry it with an
essentials
14
battery installation
4
Replace the battery door and press it
gently until you hear a click.
1
Slide the release button back until it
releases the battery door.
battery charging
2
3
Remove the battery door.
New batteries are not fully charged.
charge using the charger
1
Pull out the
connector cover,
and insert the
charger into mini
USB connector on
your phone as
shown.
Push the battery down until it snaps in
place.
2
Plug the other end of the charger into the
appropriate electrical outlet.
essentials
15
When you charge the battery, the battery
level indicator at the upper right of the screen
shows charging progress. At least one
segment of the indicator must be visible to
ensure full phone functionality while charging.
the USB cable is connected between the
computer and the phone, the phone will
power up in charging mode. This mode allows
the phone to charge fastest and quickest.
Note: If the battery is very low, the phone will
not turn On, but will continue to charge at a
low rate. The phone will power up in charging
mode when the battery has been charged to
approximately 5% of its capacity. For faster
charging under a very low battery condition, it
is recommended to use the rapid charger
supplied with the handset.
charge from your computer
You can partially charge your phone’s
battery by connecting a Motorola-approved
USB cable from your phone’s mini-USB port
to a high power USB connector on a
computer (not a low-power one, such as the
USB connector on your keyboard or bus-
powered USB hub). Typically, USB high-
power connectors are located directly on your
computer.
If the phone is turned on while charging from
a computer, it will not fully charge the battery.
In this case, the battery charge will be
maintained approximately between 80% and
95% of the battery's capacity. Cables and
software drivers are available in Motorola
Note: The phone will be charged at a slower
rate than it is charged with the rapid charger.
Your computer must be turned on, and you
must have correct software drivers installed
on your computer. If the Phone is off when
TM
Original data kits, sold separately.
Tip: Motorola batteries have circuitry that
protects the battery from damage from
essentials
16
overcharging. Of course, unplugging the
charger from the wall will avoid current drain.
port. To power up the phone normally from
charging mode, wait until the Charger Attached
screen is displayed, and then press the power
key. See “transmitters” on page 79.
turn it on & off
To turn on your phone,
enable security
press and hold
O
for a
few seconds or until the
display turns on. If
prompted, enter your
four-digit unlock code.
You must enable security the first time you
power on you phone or within 10 days of first
activation of your phone.
1
2
Press
Your are prompted to enable security.
Press under Yes. A series of screens
-
under Ok.
To turn off your phone,
press and hold
two seconds.
O
for
-
followed by the default home page
displays.
Note: If you press the
O
for more than four
seconds, the handset will power “On” in
Transmitters Off mode. To avoid turning on the
phone with transmitters off, ensure the
power key is not held at about 4 seconds after
power-up is initiated, either by pressing the
power key or plugging a cable into the USB
3
Press
O
to return to the home screen.
essentials
17
3
If you want to answer the call using the
handset, just open the flip and press
To hang up press or close the flip.
make a phone call
N
.
Enter a phone number and press
N
to make
O
a call or use a voice command. See “place a
call using voice name” on page 87.
Note: You must have the Flip Activation
feature On. See “advanced calling” on
page 100.
Tip: For best performance avoid touching the
antenna with your fingers during the call.
If you are using a Bluetooth headset, you
can press the answer key on your
Bluetooth headtset. To hang up press the
same key on your Bluetooth.
To hang up press
O
or close the flip.
answer a phone call
When your phone rings and/or vibrates, you
have the following options:
make a private call
With Private calls service, you use your phone
as a long-range, digital 2-way radio using one-
to-one Private calls or one-to-many group
calls.
1
If you want to answer the call on speaker
phone, press the speaker key with
the flip closed. To hang up press the
smart key
t
.
.
Your Private ID is the number at which you
receive one-to-one Private calls.
essentials
18
Talkgroup numbers are numbers through
which you receive one-to-many group calls.
When you send a call alert, the recipient’s
handset displays your name and emits a
series of beeps or vibrations.
to make a Private call
The recipient has the following options:
1
Enter the Private ID you want to call.
Option
2
Press and hold the PTT button. Begin
talking after your phone emits a chirping
sound.
Answer: Begin a Private call with the sender.
Queue: Store the call alert to the call alert
queue.
3
Release the PTT button to listen.
Clear: Dismiss and delete the call alert.
To end the call press
O.
Note: A Private call ends automatically if
there is no activity on the call for a few
seconds.
to send a call alert
1
Enter the Private ID you want to call as
you would when making a Private call.
send call alerts
2
Press
-
under Alert.
Sending a call alert discretely lets the
recipient know that you want to talk to him or
her on a Private call.
When the message Ready To Alert appears on
the display, press the PTT button until the
message Alert Successful: appears.
essentials
19
or
answer a private call
2
3
Queue the call allert by pressing
Queue
-
under
1
When your phone emits a chirping sound
or vibrates to indicate you are receiving a
Private call, wait for the caller to finish
speaking.
.
or
Clear the call alert by pressing
-
under
Clear
.
2
3
Press and hold the PTT button and begin
talking after your phone emits a chirping
sound.
store a phone number
or private ID
Release the PTT button to listen.
To end the call press
O.
You can store a phone number or private ID in
Contacts
:
receive a call alert
When you receive a call alert, you must
answer, queue, or clear it. You cannot receive
phone calls or Private calls until you do.
Find it:
M
>
L
>
[New Contact].
1
Enter a name for the new entry. Each
entry’s name can contain 20 characters.
2
3
Select a specific Ring Tone/Picture
Select a type for the entry (Mobile
IP or Other). To store a
private ID choose Private
.
to answer a call alert
1
Press the PTT button to start a Private call
with the sender.
,
Work1,
Work2 Home, Fax, Pager,
,
.
essentials
20
4
Enter the number for the entry and press
under Save when done.
Tip: You can set up you handset for two
different search options by pressing
-
M
>
Search Option. If you select Full Name Search, a
new window will appear to allow you to
type the name of the contact you are
Tip: Before saving the entry, you can save
more information. You can store an Email
address, IP addresses, and more. You can
choose a special ringer, create Contact
entries that are groups of Private IDs called
Group IDs and/or SDG lists.
looking for. If you select First Letter Search
,
your handset will find the nearest match
to the letter you enter.
2
3
If the Contacts entry contains more than
one number, scroll left or right until the
type of the number you want to call is
After you have saved the number, the new
Contacts entry is displayed.
displayed (Mobile
,
Private
,
Work1
,
Work2
,
Home,
call a stored phone
number or private ID
etc.).
If you chose a phone number, press
to call the entry.
N
Shortcut: From the home screen press
-
or
under Contcs
.
If you chose a Private ID, Talkgroup ID, or
SDG List, press and hold the PTT button
to call the number.
or
Find it:
M
>
L
1
Scroll to the Contacts entry.
essentials
21
Tip: If the Contacts entry you scrolled to
contains a Private ID, you can make an instant
Private call to that Private ID by pressing and
holding the PTT button, even if the Private ID
is not the type of number displayed.
set it up
Before you begin using text messaging, you
may need to set up your signature, service
center number, and expiration information.
Shortcut: From the home screen press
-
under Msgs
>
[Create Message]
>
M
>
Setup.
your phone number and
Private ID
or
Find it:
M
>
E
Select Signature and enter your signature. It
>
M
>
Text Message Setup.
Find it:
Tip: Want to see your phone number or
Private ID while you’re on a call? Press
M
>
m
>
My Info.
1
may be up to 11 characters long.
M
>
2
3
Select Delivery Report and set it to On or Off.
My Info
.
Select Srvc Cntr No: and enter the phone
number of your service center. If you do
not know this number, contact your
service provider.
text messages
If your service provider offers Text
Messaging, your phone sends text messages
using MOSMS and receives text messages
from other phones that are using MOSMS.
4
Select Expire After. This is the amount of
time messages you send are saved at the
service center if they cannot be delivered.
After this period, they are discarded.
essentials
22
Scroll to select the number of days you
want your messages to be saved.
receive a text message
1
To view the message press
-
under
5
6
Select Auto Clean Up. Set this option to On if
you want your phone to delete sent
messages.
Read
.
2
To dismiss the message notification press
under Exit
-
.
If you set Auto Clean Up to On, select Clean Up
After to set the number of days after which
sent messages are deleted or the number
of messages to be kept.
Note: If your phone is powered off when you
receive a text message, your phone notifies
you the next time you power it on. If you are
out of your coverage area, your phone alerts
you when you return to your coverage area.
Select Quick Notes to create a [New Note] or
press
-
under Edit to change the pre-
Tip: While reading a text and numeric
message that contains a phone number, you
written quick notes.
Quick notes are short, pre-written text
messages that you can create, edit, and
send in your text messages. You can
store up to 20 quick notes. A quick note
may be up to 30 characters long.
can press
S
to call that number.
read from the Message center
1
From the home screen press
-
under
Msgs
>
Inbox.
7
Press
-
under Done to save the
2
Select the message you want to read or
press the number of the message you
information you entered.
essentials
23
want to read. If the message fills more
than one screen, scroll to read it.
Contcs, or press
number you want.
M
>
Recent Calls. Select the
Tip: Scrolling through one message lets
you view the next message.
3
Select Msg: and enter the text of the
message or to use a quick note press
-
under Browse and scroll to the quick note
you want.
3
To reply to the message, press
-
under
Reply or to see all other choices, including
forwarding and deleting the message,
calling the sender, or storing the sender’s
4
5
Press
,
M
>
Set Send Method and select Text
,
Fax
x400
,
Paging Email ERMES, or Voice
,
,
.
number in Contacts, press
M.
If you want to send the message, press
under Send or to delete the message
without sending it, press under Cancel
-
create and send text messages
-
.
1
From the home screen press
-
under
Note: If you want to request confirmation
of delivery press
Msgs
>
[Create Message] [Create Text Msg].
>
M
>
Delivery Report
>
On.
or
use drafts
Select Inbox Outbox, or Drafts.
,
When you save a message as a draft, it is
saved in the drafts folder.
2
To address the message use the keypad
to enter the phone number of the person
you want to send the message to and
Shortcut: From the home screen press
under Msgs
-
press
-
under Back or press
-
under
>
Drafts.
essentials
24
1
2
Select the draft you want to edit. You also
have the choice to create new text
messages from this menu.
2
3
Press
Press
-
-
under Delete
.
under Yes to confirm.
delete all unlocked sent messages
Shortcut: From the home screen press
under Msgs
To edit the fields you want to change,
follow step 2 through step 5 in “create
and send text messages” above.
-
>
Outbox
.
1
2
Press
Press
M
>
Delete All.
resend text messages
Shortcut: From the home screen press
-
under Yes to confirm.
-
manage memory
under Msgs
>
Outbox.
Your text inbox, outbox, and drafts folder have
a set amount of memory available for storing
messages.
1
Scroll to the message you want to resend
or press the number of the message you
want to resend.
The text inbox holds 100 messages. If the
text inbox is full, you cannot receive
messages until you delete some.
2
Press
-
under Resend.
delete sent text messages
The outbox and drafts folder hold 100
messages each. If the outbox and drafts
folder memory is full, you cannot send
Shortcut: From the home screen press
-
under Msgs
>
Outbox.
1
Scroll to the message you want to delete.
essentials
25
messages or save drafts until you delete
some.
use your phone as
USB mass storage
device
To view the amount of memory available in
your text inbox:
Shortcut: From the home screen press
under Msgs
-
Find it:
M
>
u
>
Connections
>
USB Memory
>
>
M
>
Setup Inbox Mem Mtr.
>
Card Access
1
Slide open the
connector cover, and
insert the charger into
mini USB connector
on your phone as
shown.
2
3
Connect the USB cable to the USB port of
the computer.
Your memory card can now be accessed
by your computer.
essentials
26
1
2
Pull out the connector
cover, and insert the
charger into mini USB
connector on your
phone as shown.
using your handset
as a modem
You can use your handset as a modem
(Packet Data only) with a laptop, handheld
device, or desktop computer. Circuit Data is
not supported. In order to use your handset
as a modem, you must create either a wired
or wireless connection between your handset
and the other device.
Insert the data plug into the data port of
the other device.
connect via Bluetooth
Use your handset as a modem via Bluetooth.
The laptop, handheld device, or desktop
computer you want to connect to must have a
Bluetooth adapter installed.
To connect your handset wirelessly, you must
have a Bluetooth adapter for the other device.
To create a wired connection, use a USB
cable.
Check that the adapter is properly installed,
and then follow the specific instructions
outlined in the device’s user guide to connect
the device to your handset.
connect with a USB cable
Use a USB cable to connect your
handset to a laptop, handheld device, or
desktop computer.
When used as a modem, your handset is
enabled for Data Modem transfer mode, which is
used for small file transfers such as email.
essentials
27
Note: To use these services, you must install
the iDEN Wireless Data Services software
(available separately). For more information on
setting up your computer and your handset
for Packet Data calls, contact your service
provider.
essentials
28
main attractions
If your service provider offers MMS, you can
send details of the podcast to a friend and
send feedback to the podcast creator using
MMS messages.
music player
Your handset includes a music player that you
can use to play music files stored in the Music
directory on the memory card inserted in your
phone.
Audio files suported by the music player
include:
The music player groups the music files into
folders and lists. When you select a music file
to play, the music player plays this file, then
plays the other music files grouped with it.
Format
Bit Rate
Sampling
Rate
AAC
.m4a, .aac
Up to
320kbps
Up to
48 kHz
The music player also plays podcasts you
download to your computer and then save on
the Podcast directory on your phone’s
memory card. You can mark highlights within
a podcast file to help you find the parts you
most want to listen to.
AAC+
.m4a, .aac
Up to
128 kbps
Up to
48 kHz
(16 to 128
kbps)
MP3
Up to
Up to
.mp3
320kbps
48 kHz
main attractions
29
Play, or scroll to a folder and press
under Play to play the first music file in it.
-
Format
Bit Rate
Sampling
Rate
Any time you are viewing a list of folders with
the music player, you can scroll to a folder and
WMA v9 L2
WMA v3, v7, v8 320 kbps
.wma
Up to
Up to
48 kHz
press
-
under Play to start playing the
contents of that folder or press
the contents of the folder.
r
to view
play music files
To stop viewing a folder and return to the
folder or list that contains it, press under
Find it:
M
>
j
>
Audio Player.
-
1
Scroll to a folder.
Back
.
Tip: The Songs folder contains all the
music files on the memory card in a single
list.
play music while loading files
The first time the music player finds music
files on your memory card, it loads and
organizes these files. This may take a long
time for a large number of files.
2
To play the first music file in the folder,
press
-
under Play. (If the selected folder
contains subfolders, this plays the first
music file in the first of the subfolders.)
To play music while files are loading:
Press
r
to view the folder’s contents.
Find it:
M
>
j
>
Audio Player
.
Scroll to a music file and press
-
under
1
Press
-
under View
main attractions
30
2
3
Scroll through songs and folders while
loading is going on the background.
option
Repeat and Shuffle
Scroll to a music file or folder and press
Repeat lets you set the music player to play
one or all the music files in a list or folder
repeatedly. While in the music player press
-
under Play or
r.
The following options become available
through the navigation panel:
M
>
Setup
>
Repeat
>
All or One.
option
Shuffle: lets you set the music player to play
the music files in a list or folder in random
Pause and Resume
order. While in the music player press
M
>
Press
press
-
-
under Pause or
under Play or
r
to pause, and
Setup
>
Shuffle:
>
On or Off.
r
to resume playing
paused music files.
Skip to Next or Previous
Press and release
the next or previous music file. (Do not hold
the left side of the navigation key.)
work with playlists
Playlists are lists of music files you create
from the files already available through the
music player.
right or left to skip to
Playlists enable you to organize music files,
but they do not change anything in other
folders or on the memory card. Adding or
deleting a file on a playlist does not copy,
delete or move it.
Fast Forward and Rewind
Press and hold
seconds to fast forward or to rewind.
right or left for 2
main attractions
31
create a playlist
Find it:
4
When you are finished selecting files,
press under Done and under Save.
-
-
M
>
j
>
Audio Player
>
Playlists [Create
>
New]
.
The following options are available for existing
playlists:
1
Enter a playlist name.
option
Note: If you do not assign a name, the
playlist is named Playlists followed by a
number. For example, the first playlist you
create without naming is automatically
Edit a Playlist
You can change a playlist name, add music
files, remove music files, and change the
named Playlists-1
.
order of the music files in Music Player
Playlists > M Edit Playlist. Make changes and
under Save
Reorder Songs in a Playlist
>
2
3
Select [Add Songs]
.
>
press
-
.
A list of all music files on the memory
card appears.
You can change the order of the music files
while creating or editing the playlist in Music
Tip: For options to help you sort through
this list, press
M.
Player
>
Playlists > M
>
Edit Playlist
>
M
>
Select each file you want on the playlist. A
checkmark appears by each selected file.
Reorder Songs. Scroll to the song you want to
move and press under Grab; then scroll
to the place where you want the song to
appear and press under Insert
-
Tip: To deselect a selected item, scroll to
a selected file and press
r.
-
.
main attractions
32
option
option
Remove Songs
Delete a Playlist
You can remove some or all songs while
creating or editing a playlist.
While in the music player select Playlists.
Scroll to the playlist you want to delete and
press under Yes
to confirm.
M
>
Delete Playlist. Press
-
Before you have saved a new playlist or
while editing a playlist, scroll to the song
Delete all Playlists
you want to remove and press
M
>
Remove
Song and press
r
-
, or you can select Remove
under Yes to confirm and
While in the music player select Playlists
Press Delete All Playlists and press
under Yes to confirm.
.
All Songs; press
M
>
-
-
under Save
.
Reorder Playlists
Note: This deletes all playlists except the
You can change the order of the playlists in
the Playlists folder. Press
Reorder Playlists. Scroll to the playlist you want
to move and press under Grab; then
scroll to the place where you want the
playlist to appear and press under Insert
Favorites playlist.
M
>
Edit playlist
>
use the favorites playlist
-
The Favorites playlist is a permanent playlist.
You can Add To Favorites, remove and change the
order of the music files, but you cannot
rename or delete music files.
-
.
Find it:
M
>
j
>
Audio Player
>
Songs.
main attractions
33
Select the song you want to add to your
favorites and press
podcast details, but does not play the
podcast. To play the podcast, press
under Play. After you begin playing the
M
>
Add To Favorites
.
-
work with podcasts
podcast, pressing
resumes the podcast.
r
pauses and
Find it:
M
>
j
>
Audio Player
>
Podcasts.
•
If the podcast you are playing contains
highlights, pressing and releasing the
right or left skips to the next or
previous highlight within the podcast,
or to the beginning or end of the
podcast.
Note: The Podcasts folder is empty until you
download podcasts from your computer.
1
Scroll to view individual podcast episodes
or folders containing multiple episodes of
the same program.
2
Press
r
to view the podcast episodes
highlights
within a folder or the details screen of an
individual podcast episode.
Highlights are portions of a podcast that are
marked to help you find them more easily.
Some podcasts you download may already
have highlights marked. You can use the
music player to add and delete highlight
markers. Press and release (don’t hold) the
right or left to find them.
You can pause, resume, fast-forward, and
rewind just as with any other music file.
Some functions differ when playing a
podcast:
•
Pressing
r
when you have scrolled to
a podcast displays a screen showing
main attractions
34
You can play all the highlights in a podcast and
skip everything that is not marked as a
an MMS message that the person can save
and download onto their computer.
highlight using Highlights Only
.
If played on a phone with a music player, like
yours, they will see any highlight markers
created within the podcast.
add a highlight marker
1
While playing a Podcast press
M
>
Add
Find it:
Forward Details
M
>
>
j
>
Send.
Audio Player
>
Podcasts
>
M
>
Highlights
.
2
3
Press
-
under On to mark the beginning.
Note: If the podcast has no highlights, this
option will not be displayed
Go to the point in the podcast that you
want to mark as the end of the highlight
and press
-
under Off.
audio and visual options
You can customize the sound of the music
player by setting the equalizer while music is
playing.
4
Press
-
under Back
.
Tip: Highlight markers can be deleted by
pressing Clear or pressing
Clear All Highlights from the
M
>
M
>
Edit
Highlights
>
M
>
To set the equalizer press
M
>
Setup Equalizer.
>
Podcasts menu.
You can also customize the look of the music
player screen by choosing a theme or by
viewing visuals while listening to a music file.
send podcast information
If you want to share a podcast you have
saved to your memory card, you can send it in
To choose a theme press
M
>
Setup
>
Themes.
main attractions
35
background music
Your handset has the capability to play music
in the background while you are acessing
media center
The media center lets you access pictures,
videos, and audio recordings stored in your
phone’s memory or in the Audio, Image and
Video folders on a memory card inserted in
your phone’s memory card slot.
other features like Settings
,
Media Center
,
Bluetooth,
GPS
,
Contacts
,
MMS
,
Datebook
,
Memo Recent Calls, and
,
others.
You can also enjoy listening to your favorite
background music while browsing the web,
reading news or checking the weather.
The following audio recordings can be
accessed through the media center:
•
•
Voice records
play music in the background
Musical ring tones in the list of ring
tones
Find it:
M
>
j>
Audio Player
>
Songs.
1
Select a music file and press
the song.
r
to play
•
•
Audio recordings saved from MMS
messages received
2
Press
M
>
Hide Player.
Audio recordings downloaded to your
phone
The music player continues playing and the
handset returns to the home screen. To jump
back to the music player, press
Because the memory card inserted in your
phone may contain files saved to it using a
device other than your phone, not all types of
pictures, videos, and audio recordings on the
-
under
Player.
main attractions
36
memory card may be accessed through your
phone’s media center.
Format
Bit Rate
Sampling
Rate
Items in the media center can be sent in
MMS messages and with Bluetooth. See
“MMS” on page 53 and “bluetooth®” on
page 69.
16 kHz
(MPEG4
AAC-LC)
.aac , .3gp,
.m4a, .3ga,
.mp4
Pictures in the media center can be sent in
Private calls using Send via PTT. See “PTV
features” on page 43.
Up to 128 kbps
(16 to 128 kbps)
Max: 48 kHz
AAC+
.aac, m4a,
.3ga, .mp4
Media files supported by the Media Center
include:
Up to 128 kbps
(16 to 128 kbps)
Up to
48 kHz
Enhanced
AAC+
.aac, .m4a,
Format
Bit Rate
Sampling
Rate
4.75 kbps – 12.20
kbps (supports all
3GPP specified
rates)
AMR-NB
.amr, .3gp,
.3ga, .mp4
.3ga, .mp4
Up to 320kbps
Up to
48 kHz
MP3
.mp3,
.mpga
6.6 kbps - 23.85
Kbps (supportsall
3GPP specified
rates)
8 kHz
AMR-WB
.awb, .3ga,
.3gp
main attractions
37
Format
Bit Rate
Sampling
Rate
Format
Bit Rate
Sampling
Rate
Up to 1536kbps
Up to
48 kHz
Up to 320 kbps
48 kHz
8-bit
Linear
PCM
WMA v9
L2 (also
WMA v3,
v7, v8)
.waw, .au
.wma
Up to 1536 kbps
Up to 48 kHz
(8, 11.05, 12,
16,22,24,3,44,
48 kHz)
16-bit
Linear
PCM
N/A
N/A
N/A
N/A
Stand
MIDI
.mid, .midi,
.waw, .au
.smf
Up to 704 kbps
Up to 704 kbps
Up to
8-bit A-
law PCM
.waw, .au
48 kHz
XMF MIDI
.xmf, .mmf,
.xmf0,
.xmf1,
.mxmf
Up to 44 kHz
(8, 11.05, 12,
16, 22,44 kHz)
8-bit mu-
law PCM
.waw, .au
1 – 3.5 kHz
Monophonic
N/A
iMelody
.imy
main attractions
38
Supported video file formats include:
preference you chose. You can access these
saved pictures and videos through the media
center.
Format
Extension
MPEG4 + AMR-NB
MPEG4 + AMR-WB
MPEG4 + AAC / AAC+ /
.mp4, .3gp
.mp4, .3gp
.mp4, .3gp
You can send the pictures you take either in
Private calls or with Bluetooth. You can also
assign them to Contacts entries, or set them
as your phone’s wallpaper.
Enhanced AAC+
H.263 + AMR-NB
H.263 + AMR-WB
H.263 + AAC / AAC+ /
.3gp
.3gp
.3gp
access the camera
There are many ways to access the camera.
The simplest way is to press
To take pictures aim the camera lens on the
flip and press under Capture or press
e.
Enhanced AAC+
-
r.
camera
Note: If you insert a memory card into the
phone now, you are prompted to save the
picture you have just captured to the memory
card. Choosing to save the picture to the
memory card does not change your storage
preferences after the picture is saved.
The 1.3 MP camera with a digital, external
viewfinder in your handset takes pictures and
records videos. You can save these pictures
and videos in your phone’s memory or to a
memory card inserted in your phone’s
To save the picture, press
r.
memory card slot, depending on the storage
main attractions
39
To discard the picture without saving it, press
under Discard
option
-
.
Spotlight
From the camera viewfinder, you can press
to enter Menu Options.
Turn on the spothlight On before taking a
picture in low light conditions. You can set it
up to be Always On or Off
M
The following options become available:
.
Self Timer
option
Delay capturing the picture for a selected
number of seconds. The values are: Off
Record Video
Recording a video is similar to taking a
picture. If you store videos in phone
memory, you can record videos up to 60
seconds long. If you record video onto the
memory card, the video length is limited by
how much memory is available on the card
or two (2) hours.
(default), 10 seconds, 15 seconds, 20 seconds
.
To turn off the timer before the picture is
captured, press
-
under Cancel.
Picture Quality
Adjust the picture quality to Normal or Fine
.
Zoom
Set the zoom to 1x, 2x, or 4x. You can also set
zoom from the viewfinder by pressing
up and down.
main attractions
40
When you finish taking pictures, press the
option
smart
.
key to exit the self-portrait camera
Picture Size
mode.
Set up the picture size to Max (1280x1024),
Xlarge (640x480), Large (320x240), Medium (160x120),
Small (128x96), Wallpaper1(176x220), or
photo editor
Your handset comes with a photo editing Java
application that allows you to edit your
pictures with crop, resize, flip and color
adjustment tools. You can also add graphics
and text to your pictures.
Wallpaper2(96x65). You can also set picture size
from the viewfinder by pressing
right.
left and
digital viewfinder
Find it:
M
>
j
>
Media Center.
The external digital
viewfinder allows you
to take self-portraits
with convenience and
accuracy compared to a
mirror.
1
2
Select the picture you want to edit.
Press
or
M
>
Edit.
Find it:
M
>
T
>
Photo Editor.
To take self-portraits
change storage preference
You can choose whether media items are
saved to your phone’s memory or to the
press
and press the speaker
phone key.
e, close the flip
t
main attractions
41
memory card. From the camera viewfinder
press
customize the camera
The Camera Setup menu lets you customize the
camera as follows:
M
>
Memory Card
>
Store Media.
1
Select On Phone or Prefer On Card
.
The location that you choose becomes the
option
Store Media option in Settings
.
Ask for Name
access the media center
If this option is On, you are prompted to
enter a name for each picture before
saving. Otherwise, pictures are
automatically saved with the date and a
number as their names.
You can access the media center from the
camera at any time, except when you are
using the Camera Setup menu or viewing the
memory screen.
Shutter Sound
Press
M
>
Media Center.
Set the default sound the camera makes
when is taking a picture.
The media center contains all your pictures,
music and video files located on your phone’s
memory or your removeable memory card.
Spotlight Setting
Use the
*
or the
#
to filter your results.
Select Always On, or Off, depending on the
lighting condition.
main attractions
42
•
•
•
My Info
option
Contact information
Location information1
Default Size
Sets the default value for the Picture Size
option.
You can choose to send messages, pictures,
events, My Info Contacts or Location information to
,
Default Quality
the Private ID you are engaged in a Private call
with, Private IDs on the Recent Calls list, and
Sets the default value for the quality of the
picture.
Private IDs stored in Contacts
.
When you make or receive a Private call, your
phone automatically determines whether the
phone you are engaged in a Private call with is
able to receive each of these items. Your
phone saves this information for as long as
the Private ID is on your Recent Calls list or is
saved in your Contacts. Your phone updates the
saved information each time you make or
receive a call to or from that Private ID.
PTV features
With Push To View features, your phone can
send and receive the following items through
Private calls with other phones that have this
capability:
•
•
•
Short text messages1
Pictures1
Datebook events
You can turn your phone’s ability to send and
receive messages, pictures, events or
location information On and Off.
1. Additional charges may apply.
main attractions
43
Note: You cannot send PTT feature items
during Talkgroup calls or SDGC calls.
Note: The first time you send a message,
Messaging Fees May Apply Continue? appears and you
are prompted to respond. Press
to acknowledge the message.
-
under Yes
send messages
The Push to Send Messages feature
lets you send short text messages through
Private calls.
begin a message from the Contacts or
the Recent Calls list
1
From the Contacts or the Recent Calls list,
select the entry containing the Private ID
you want to send the message to.
When you send a message, it appears on the
display of the phone you are engaged in the
Private call with.
2
Press
M
>
Use PTT Feature
>
Send Message.
begin a message and choose a
recipient
You can begin a message during a Private call,
begin a message from the PT Manager
The PT Manager lets you select the Private ID
you want to send the message to from Contacts
or the Recent Calls list.
from the Contacts list, the Recent Calls list, or from
the PT Manager
begin a message during a Private call
Use PTT
.
Find it:
M
>
p
>
PT Manager
>
Send Message.
Then select A Contact or A Recent Call to see a list
of entries from the Contacts or the Recent Calls list
that can receive messages.
While in a Private call, press
M
>
Feature
>
Send Message.
main attractions
44
To view the message: Press
-
under Read
.
create messages
To dismiss the message press
-
under
After you have begun a message and chosen
a recipient, a screen appears that lets you
create the text of the message you want to
send. Your message may be up to 400
characters long.
Dismiss
.
reply to a message
1
2
3
View the message.
You can choose from a list of ready-made
words or short phrases called Quick Notes.
You can use a Quick Note as it is or edit it
before you send it. Editing a Quick Note
changes the Quick Note for this message only
and will not change the Quick Note on the list.
Press under Reply
-
.
Create the message and press the PTT
button to send it.
send pictures
You can send pictures stored in the
Media Center through Private calls. The picture
you send appears on the Private call
recipient’s display.
send a completed message
After you have completed your message,
press the PTT button to send it.
If the recipient accepts the picture, their
phone saves the picture. The picture then
appears in that phone’s recent call list.
receive messages
When you receive a message, a message
notification appears on the display.
main attractions
45
The first time you send a stored picture after
turning the phone on, Picture Fees May Apply
Continue? appears and you are prompted to
respond.
5
When prompted, press the PTT button to
resume the Private call.
start a call by sending a picture
Note: You cannot make or receive Private
calls while transmitting or receiving a picture.
from the media center
Find it:
M
>
j> Media Center
1
2
3
4
Scroll left or right to Media: Pictures
send a picture during a call
Select the picture you want to send.
1
While in a Private call, press
-
under
>
Picture or press
M
>
Use PTT Feature
Send
Press
M
>
Send Via...
>
Send Via PTT.
Picture.
Select A Contact or A Recent Call
A list of pictures that can be included in a
Private call appears.
A list of contacts that have Private IDs and
are able to receive pictures appears.
2
3
4
Select the picture you want to send.
5
Select the name of the person you want
to send the picture to.
Press the PTT button to send the picture.
Wait while the picture is transmitted. The
Private call is temporarily interrupted
while a picture is transmitted.
6
7
Press the PTT button to send the picture.
When prompted, press the PTT button to
resume the Private call.
main attractions
46
from the PT Manager:
Find it: p> PT Manager
Select A Contact or A Recent Call
Pictures you receive are saved to your
phone’s memory or a memory card. They are
accessible through the media center.
M
>
>
Send Picture.
1
When you see a message asking if you want
to accept the picture, press Yes to accept or No
to decline.
A list of contacts that have Private IDs and
are able to receive pictures appears.
2
Select the name of the person you want
to send the picture to.
Tip: If you want to stop the transmission
before it is finished, press
E.
3
4
5
Select Browse Picture or Capture Picture.
Note: The first time you accept a stored
picture after turning the phone on, Picture Fees
May Apply Continue? appears and you are
Press the PTT button to send the picture.
Once picture has been sent, when
prompted press the PTT button to resume
the call.
prompted to respond. Press
accept the picture.
-
under Yes to
clear a picture from the display
receive a picture
If you want to clear a picture from your
phone’s display while still on a call, press
When someone sends you a picture, your
phone emits a tone or vibrates and a message
appears asking if you want to accept the
picture.
M
>
Clear Screen.
The picture will not appear on the display
again the next time you receive a call from
main attractions
47
person who sent it. This does not delete the
picture from My Pictures
event in your datebook. If you want to
chose an existing event do so.
.
3
4
If the event is a recurring event: Select This
Event Only to send only the event selected.
Select Repeat Events to send all ocurrences
of the event.
send a Datebook event
You can send an event already stored in
your phone’s datebook or create a new
datebook event to send. You can send
datebook events during private calls, from the
Contacts list, Recent Calls list or from the PT
Manager.
Push the PTT button to send the event.
send My Info
1
While in a Private Call press
M
>
Send My
to send a datebook event during a
private call
Info via PTT, and push the PTT button to
send.
1
While in a Private call press
M
>
Use PTT
or
Feature
>
Send Event.
2
From the home screen press
My Info > M
the PTT button to send.
M
>
m
>
Note: If these options do not appear on
the menu, the Private ID you are engaged
in a private call with is not able to receive
Datebook events.
>
Send My Info via PTT and push
set my info sending option
You can control what portion of the
information in My Info is sent and whether it is
2
If you want to create a new datebook
event, press
-
under New and create the
main attractions
48
sent automatically in every call or only when
you choose to send it.
2
When you make a call in which your
information is sent automatically, the
name you entered in the My Name field of
My Info appears on the display of the
recipient’s phone, even if your name and
Private ID are not stored in the recipient’s
Contacts.
Find it:
M
Info to Send
>
p> PT Manager
>
Configure
>
PTT
My Info
>
1
Select or remove the fields you want to
send.
2
Press
-
under Done.
send Contact information
The information your phone sends always
includes My Name and Private. You may also send
Line 1 Line 2, and Carrier IP, depending on your
sending options.
1
2
3
While in a Private Call press
M
>
Use PTT
Feature
.
,
Select Send Contact and select the contact
information you want to send.
automatic sending
To control whether you send your information
automatically:
Push the PTT button to send.
or
1
2
From the home screen press
PT Manager > Send Contact.
M
>
p
>
Find it:
M
Auto Send
>
p> PT Manager
>
Configure
>
PTT
My Info
>
Enter the Private ID number of the person
you want to send the Contact information
1
Select On or Off
to or press
-
under Browse
.
main attractions
49
3
4
Select from Recent Calls
,
Contacts, or Memo
.
2
3
Select the name of the person you want
to send your location to.
Select the contact information you want
to send and push the PTT button.
Press the PTT button to send your
location.
send your location
Note: The location information can be stored
in the recipient’s recent call list.
You can transfer your approximate
location information through Private calls to
other enabled phones. Using the integrated
GPS feature the following location information
can be shared:
turn PTT features on and off
You can turn your phone’s ability to send and
receive messages, pictures, and Datebook
events on and off.
•
•
Time Stamped Latitude/Longitude
Relative Location or Direction and
distance from the sender in Miles or
Kilometers
You cannot turn your phone’s ability to send
and receive My Info and contact information
on and off.
Find it:
M
>
p
>
PT Manager
>
Send Location.
Find it:
M
>
p
>
PTT Options > On/Off PTT
Features
.
1
Select A Contact or A Recent Call.
4
Check or uncheck Messages, Pictures
Events and/or Location.
A list of contacts that have Private IDs and
are able to receive pictures appears.
main attractions
50
one touch PTT
option
Assigned Number
Find it:
M
>
p> PTT Options
>
One Touch PTT.
Call a Private ID you assign. Enter the
One Touch PTT sets your phone to do any of
the following each time you press the PTT
button from the home screen:
under Search. Select Contacts
Memo
-
Recent Calls, or
,
.
option
If you are entering a Talkgroup number,
press before the number.
Off
#
PT Manager
Nothing happens when you press the PTT
button from the home screen.
Go to PT Manager. See “PT manager” on
page 53.
Quick PTT
Send Event
Go to Quick PTT. See “quick PTT” on
page 52.
Go to the first screen to send a Datebook
Event.
Last Call
Send Message
Call the most recent Private ID or Group on
the recent calls list.
Go to the first screen to send a message.
See “send messages” on page 44.
main attractions
51
To view a list of Contacts and SDG lists with
option
:
Send Picture
Find it:
To move between Contacts
use the left or right, or press
To make a Private call or SDG call:
M
>
p> Quick PTT
Go to the first screen to send pictures. See
“send pictures” on page 45.
,
Recent Calls, or Memo
,
*
or
#.
Send My Info
Go to the first screen to send My Info. See
“send My Info” on page 48.
1
2
3
Select the entries you want.
Press under Done
Push the PTT button.
Send Contact
-
.
Go to the first screen to send a contact. See
“send Contact information” on page 49.
To save your selections as a SDG list press
Save SDG. For more information about
Send Location
M
>
SDG lists, see “selective dynamic group
(SDG) calls” on page 90.
Go to the first screen to send your location.
See “send your location” on page 50.
If you want to assign a name to the SDG list,
enter the name.
quick PTT
Quick PTT lets you quickly make a call,
create an SDG list or make a SDG call when
access any Private IDs on your phone.
Note: If you do not assign a name, the SDG
list is named SDG followed by the number of
main attractions
52
members in the SDG list. For example, SDG
(8) for a SDG list with 8 members.
or
3
Select Configure to configure your PTT Quick
Notes
,
PTT My Info, PTT Location, One Touch PTT, or
On/Off PTT Features
.
PT manager
The PT Manager lets you quickly access PTT
features, and other Private call features, from
the main menu.
MMS
Multimedia Messaging Service (MMS) lets
you send and receive messages that may
include text, pictures, videos, and audio
recordings.
You can also access the Quick PTT feature
and set the One Touch PTT feature.
Find it:
M
>
p
>
PT Manager
Depending on your service provider, your
phone may support MOSMS as well as MMS.
You should see no significant differences
between the two; some names of menu
items and the steps you take to access
features may differ.
1
Select Quick PTT to quickly find a contact
that has a Private ID.
or
2
Select Send Message, Send Picture, Send Event
My Info Send Contact or Send Location. After
,
Send
,
choosing what PTT item you are sending,
select a contact and press the PTT button
to send.
create a message
To begin creating a message press
M
under Create.
>
Messages
>
[Create Message] or
-
main attractions
53
Note: You can also create a message from
Recent Calls, or the home screen.
3
Press Send.
Contacts
,
more message options
To address the message:
To view more message fields in a message
you are creating, select ...More...
1
2
Select To:
Add the phone number or email address.
or
The following options become available:
option
3
4
Select from Contacts or Recent Calls
.
Subject
Press
r
.
Create or edit the subject line.
Tip: To remove a phone number or email
address from the list of message recipients,
scroll to the phone number or email address
and press
When you are finished addressing the
message, press under Back
To enter or edit the body of the message:
Attach
Attach a picture, audio file, video or voice
record.
-
under Remove.
Cc
-
.
Send a copy of this message to someone
else.
1
2
Select Message.
Enter text or use a Quick Note and press
r.
main attractions
54
message is highlighted in the message
center. You cannot reply to unread messages.
option
Auto Replies
To reply to a message:
Allows you to create a list of possible short
answers for the recipient to choose when
replying to your message.
1
2
View the message you want to reply to.
To reply to the sender only, press Reply or
Reply All
.
Priority
3
A list of short phrases appears. Select any
of these phrases to add it to your
Set priority Normal or High
.
Report
messages or select [Create Reply]
.
Set receipt confirmation On Delivery
.
4
5
Edit any message fields you want to
change.
Valid Until
Set a date after which attempts to deliver
the message end. Or press
Send the message.
-
under No
Date.
quick notes
When you are filling in the Message and Subject
message fields, you can add ready-made
words or short phrases called Quick Notes. After
you add these words or phrases, you can edit
them as you would any other text.
reply to a message
You can reply to a message while you are
viewing it, or while a previously viewed
main attractions
55
1
While you are creating a message, scroll
to or select Message or Subject
A list of available pictures, videos, and audio
recordings appears.
.
2
3
Press QNotes or Insert QuickNotes
M
>
.
Select the picture, video, or audio recording
you want to insert.
Select the Quick Note you want to insert
into the message.
Tip: To view or listen to the item before
inserting it, highlight it and press Preview
.
insert a picture, video, and
audio recording from the media
center
You can insert one or more pictures, videos,
and audio recordings from the media center
into the body of the message. You can
include text in the body of your message in
addition to these items.
remove an inserted item
To remove an item from the message you are
creating:
1
2
Highlight the item.
Press under Delete
-
.
attach a picture, video, and
audio recording from the media
center
You can attach one or more pictures, videos,
and audio recordings from the media center.
insert items
While you are filling in the Message field, press
M
>
Insert Picture
,
Insert Video, Insert Audio, Capture
Video, Capture Picture or Record Voice
.
1
Select Attach
>
[New Attachment].
main attractions
56
2
3
Select Browse Pictures
,
Capture Picture, Browse
Tip: If you want to adjust the zoom,
spotlight, picture quality, picture size, or a
timer, set these options before taking the
picture.
Audio Record Voice Browse Video, or Record Video.
,
,
A list of available pictures, videos, and
audio recordings appears.
3
4
Take the picture.
Select the picture, video, or audio
recording you want to attach.
When you have captured the picture you
want, press Save. This will automatically
save it to your media and attaches it to
your message.
Tip: To view or listen to the item before
attaching it, highlight it and press Preview
.
If you want to attach more items, select
To discard the picture, press Discard. You
can then take another picture.
[New Attachment]
.
4
When you are finished, press Done.
5
When you are finished, press Done.
take a new picture
The picture is attached to the message
and saved to the default storage location.
1
While you are creating a message, scroll
to any message field and press or
select Attach
M
record a video
>
[New Attachment].
You can record a video to send with a
message:
2
Select Capture Picture. This accesses the
camera.
1
Select Attach
>
[New Attachment]
.
main attractions
57
2
3
Record and adjust video.
To save the video, press
5
When you are finished, press Done.
e
or press
r
.
The voice record is attached to the message
and saved to the media center and the list of
voice records.
To view the video without saving it, press
Review
.
To discard the video without saving it, press
remove an attachment
To remove an attachment in a message you
are creating:
Discard
.
The picture is attached to the message and
saved to the default storage location.
1
2
Select Attach.
create a new voice record
You can create a new voice record to send
with a message:
Scroll to the attachment you want to
remove.
3
Press
M
>
Unattach.
1
2
3
Press
M
or select Attach
>
[New Attachment].
drafts
Select Record Voice
.
While you are creating a message, you can
save it in the MMS drafts folder before you
send it.
Say the message you want to record into
the microphone.
4
When you are finished recording, press
You can view, edit, send, or delete saved
drafts.
Save
.
main attractions
58
2
Press
r.
save a message in the MMS
drafts folder
While composing a message you can press
delete a draft
When you send a draft, it is removed from the
MMS drafts folder.
M
>
Save In Drafts.
You can continue to create the message. The
version you saved in the MMS drafts folder
will not change.
To delete a message in the MMS drafts folder
without sending it, scroll to the message you
want to delete and select Delete
>
Yes.
send a draft
MMS sent items
MMS messages you have sent or tried to
send are stored in the MSS Outbox.
Shortcut: From the home screen press
under Msgs
-
>
Drafts.
1
2
Select the draft you want to send.
Press
forward items from the sent
items
M
>
Send.
edit a draft
Shortcut: From the home screen press
under Msgs
-
Shortcut: From the home screen press
under Msgs
-
>
Sent Items.
>
Drafts.
1
Scroll to the message you want to
forward.
1
Select the draft you want to edit.
main attractions
59
2
3
Press
M
>
Forward
.
1
2
Scroll to the message you want to view.
Press
Edit and press
-
under Send
.
M
>
Delivery Status.
resend
delete a message
If a message was not sent from your handset,
you can resend it.
1
2
3
Scroll to the message you want to delete.
Press
Press
M
>
Delete Message.
Shortcut: From the home screen press
under Msgs
-
-
under Yes to confirm.
>
Sent Items.
receive a message
When you receive an MMS message, a
1
2
Scroll to the message you want to resend.
Press under Resend
-
.
message notification appears on the display.
Note: If your message was sent successfully,
Resend will not appear as an option.
1
To view the message press
r.
If your phone is set to download new
messages automatically, the message
downloads from the message server
now.
check delivery status
If a message was successfully sent and you
set the message to give a report confirming
delivery, you can check the delivery status:
2
If your phone is set prompt you before
Shortcut: From the home screen press
under Msgs
-
downloading new messages, press
M.
>
Sent Items
.
main attractions
60
3
If the message fills more than one screen,
scroll to read it.
2
3
Highlight the attachment you want to
open. Attachments appear at the end of a
message.
embedded objects and
attachments
Messages may contain pictures, videos, or
audio recordings as part of the body of the
message or as attachments.
Press
r.
Note: Attachments that are of an unknown
type cannot be opened, but they can be
deleted.
view received messages from
the message center
If a message contains pictures, videos, or
audio recordings in the body of the message,
highlight each picture, video, or audio
recording to view or play it.
Shortcut: From the home screen press
under Msgs
-
>
Inbox.
If a message contains a picture, video, or
audio recording as an attachment, open the
attachment to view the picture or play the
video or audio recording.
Select the message. If the message has not
yet been downloaded from the message
server, it is downloaded now.
delete unread messages
open attachments
To open an attachment:
1
Scroll to the message you want to delete.
1
View the message.
main attractions
61
2
Press
confirm.
-
under Delete and
-
under Yes to
From field, the To field, the Cc field, the
subject line, or the body of the message, you
can call or send a call alert to that number.
forward a message
send a call alert
1
Press
M
>
Forward.
1
View the message.
2
Create and send your message.
Embedded objects and attachments are
included when you forward a message.
2
Highlight the Private ID or Talkgroup ID
you want to alert.
3
4
Press
M
>
Alert.
lock and unlock messages
Locked messages cannot be deleted until you
unlock them.
Push the PTT button.
make a group call
1
View the message you want to lock or
unlock.
1
2
3
View the message.
Press
M
.
2
Press
M
>
Lock Message or Unlock Message.
Highlight the Talkgroup ID you want to
call.
call a number in a message
If a message you receive contains a phone
number, Private ID, or Talkgroup ID in the
4
5
Select Talkgroup
.
Push the PTT button.
main attractions
62
Contacts type you want to assign the
number or email address.
store message information to
contacts
If a message you receive contains a phone
number, Private ID, Talkgroup ID, or an email
address in the From field, the To field, the Cc
field, the subject line, or the body of the
message, you can store this information to
Contacts.
6
Press
-
under Save.
go to a website
If a message contains one or more website
URLs, you can go to that website.
1
2
View the message.
1
2
View the message.
Highlight the website URL you want to go
to.
Highlight the number or email address
you want to save.
3
Press
M
>
Go To Website.
3
4
Press
To store the number or email address as a
new entry, select [New Contact]
M
>
Save Number or Save Email.
Note: The entire URL must appear in the
message to allow you to open the
website.
.
To store the number or email address to
an existing entry, select the entry.
5
With the Contacts type field highlighted,
press
left or right to display the
main attractions
63
save an embedded picture,
video, or audio recording
To save a picture, video, or audio recording
that is part of the body of a message you
receive:
delete an embedded picture,
video, slide show, or audio
recording
To delete a picture, video, or audio recording
that is part of the body of a message you
receive:
1
2
View the message.
1
2
View the message.
Highlight the picture, video, or audio
recording you want to save.
Highlight the picture, video, or audio
recording you want to delete and press
3
4
Press
M.
M
.
Select Save Picture
,
Save Video, or Save Audio.
3
Select Delete Picture, Delete Video, or Delete Audio.
The item will save in the default storage
location.
Note: You may save or delete pictures
and audio recordings from slide shows
individually as you view or listen to them.
Note: Some types of pictures, videos,
and audio recordings can be viewed or
played, but not saved.
save attachments
1
View the message.
2
Highlight the attachment you want to
save.
main attractions
64
3
Press
M
>
Save Attachment.
save audio
Selected items save to the default
storage location.
1
View the slide show.
Press Save Audio.
2
M
>
Note: Some types of pictures, videos,
and audio recordings can be viewed or
played, but not saved.
If the slide show contains more than one
audio recording, a list of the audio
recordings appears. Select the audio
recording you want to save.
delete attachments
1
View the message.
message transmission
2
Highlight the attachment you want to
delete.
After you start to send a message you have
created or start to download a message you
have been sent, you can still stop the
3
4
Press
Press
M
>
Delete Attachment.
message transmission from being completed:
-
under Yes to confirm.
With the flip is closed, press the smart key on
the top
.. Opening or closing the flip does
save a picture
1
not interrupt message transmission.
View the slide show.
customize MMS
2
When the picture you want to save
appears, press
M
>
Save Picture.
Find it:
M
>
g
>
M
>
MMS Setup
.
main attractions
65
This option is available from many context-
sensitive menus when you are using MMS.
option
Replies: Lets you create new reply phrases
and edit or delete reply phrases you have
created.
The MMS Setup menu lets you customize
MMS for your handset with the following
options:
Download Options: Controls whether your phone
automatically downloads new messages
when they arrive, or only after you respond
to a prompt or read the message from the
Inbox. Set this option to Automatic if you want
your phone to download new messages
automatically; set the option to Manual if you
want your phone to prompt you before
downloading new messages.
option
Friendly Name: Enter text here to create a
friendly name. Your friendly name is the
name displayed in the From: field on other
iDEN handsets when they receive
messages from you.
Signature: Enter text here to create a
signature. Your signature is text that is
automatically inserted at the end of all
messages you create. You can edit the text
before sending the message.
Cleanup: Controls how long messages remain
in the Inbox and Outbox before they are
deleted.
Quick Notes: Lets you create new Quick Notes
and edit or delete Quick Notes you have
created.
main attractions
66
3
Edit the text and press
r.
new quick notes and reply
phrases
Note: These Quick Notes are not the same as
the quick notes used with MOSMS
messages. Each messaging service has its
own quick notes feature.
delete only Quick Notes and reply
phrases you have created
1
From the MMS Setup menu, select Quick
Notes or Replies
.
2
Scroll to the Quick Note or reply phrase
you want to delete.
create quick notes
1
From the MMS Setup menu, select Quick
3
4
Press
Press
-
-
under Delete
.
Notes or Replies
.
under Yes to confirm.
2
3
Select [New QuickNote] or [New Reply]
.
delete all Quick Notes or all reply
phrases you have created
Enter text from the keypad and press
r.
1
From the MMS Setup menu, select Quick
edit quick notes
You can edit only Quick Notes and reply
phrases you have created.
Notes or Replies
.
2
3
Press
Press
M
>
Delete All.
1
From the MMS Setup menu, select Quick
-
under Yes to confirm.
Notes or Replies
.
2
Select the Quick Note or reply phrase you
want to edit.
main attractions
67
clean up options
option
The clean up option controls how long
messages remain in the Inbox and Sent Items
before they are deleted. You set the clean-up
option for the Inbox and Sent Items
separately.
10 Messages: If you have more than 10
messages, messages are deleted in the
order they were received, starting with the
oldest, until 10 are left.
With these options, messages are deleted
in the order they were received, starting
with the oldest, until the selected number
are left.
The clean up option deletes only read,
unlocked messages.
Find it:
M
>
g
>
M
>
MMS Setup > Cleanup.
1 Day Messages are deleted if they are older
:
1
2
Select Inbox or Sent Items
.
than 1 day.
Choose a clean up option from the
following list:
3 Days: Messages are deleted if they are
older than 3 days.
option
With these options, messages are deleted
when you exit the message center after
setting the option.
Off: Messages are never automatically
deleted.
Custom: Lets you create a clean-up option of
up to 99 messages or 99 days. for the inbox
5 Messages: If you have more than 5
messages, messages are deleted in the
order they were received, starting with the
oldest, until 5 are left.
main attractions
68
®
3
Press
-
under Yes to automatically delete
bluetooth
messages now or press
delete messages later.
-
under No to
Your handset supports the use of wireless
Bluetooth stereo headsets. The audio from
the music player is routed to the stereo
headset. Additionally the handset can be used
to stream stereo audio to a home
delete all messages
To delete all read, unlocked messages from
the Inbox, all messages in the Drafts folder, or
all successfully sent messages in the Sent
Items folder:
entertainment system.
All stereo audio includes ring tones, music
and Java sound.
Find it:
M
>
g
.
Find it:
M
>
m
>
Bluetooth.
1
2
3
Select Inbox
,
Drafts, or Sent Items.
The Bluetooth connection menu contains an
option to search for Audio Devices including
stereo Bluetooth devices.
Press
Press
M
>
Delete All.
-
under Yes to confirm.
turn Bluetooth On or Off
You can turn your phone’s Bluetooth feature
on or off. While Bluetooth power is on, your
phone can communicate with other devices.
Find it:
M
>
m
>
Bluetooth
>
Setup Power.
>
main attractions
69
1
2
Select On to power Bluetooth On.
phone will scan the Bluetooth headset
until it finds it. Press when you see
the name of the Bluetooth headset on
your screen.
r
Select Name if you wish to assign a name
to your handset.
3
Select Find Me Duration to determine the
amount of time in which your handset can
be found by other Bluetooth devices.
3
4
Your handset requires that you create a
bond in order to connect with a Bluetooth
headset. Press
-
under Yes when you
Tip: You can turn off Bluetooth if you want to
prolong battery life or if you enter an area
where Bluetooth is prohibited.
are prompted to bond with the headset.
Enter the Bluetooth pass key.
Some Bluetooth devices ship with
Bluetooth PINs. Please refer to your
Bluetooth device’s user guide to locate
this information.
make a Bluetooth connection
connect your handset with a Bluetooth
headset
If a device ships without a Bluetooth PIN,
then you can enter any PIN for that
device. To establish a connection to that
device, enter the same PIN for both your
phone and the device. For example, if you
enter 1234 as the device’s PIN, then enter
1234 as your phone’s PIN.
Find it:
[Look for Devices].
M
>
m
>
Bluetooth
>
Audio Devices
>
1
Follow the instructions on your Bluetooth
headset to set it up to be found.
2
Once your Bluetooth headset is set to be
found press
r
on your handset. Your
main attractions
70
5
Press
-
under Ok
.
Note: If the Audio Devices list contains only one
device, then your phone will automatically try
to connect to that device.
Note: This handset offers bluetooth auto pair
feature with auto pair compatible Motorola
devices. When bonded via bluetooth with a
certain device, the pin will not be required
1
2
While in a call, press
Press under Yes to power On
Bluetooth.
M
>
Use Bluetooth.
-
connect your handset with another
Bluetooth device
3
Select the audio device you want to
connect to from the list of Handsfree Devices
.
Find it:
M
>
m
>
Bluetooth Pair To Devices.
>
1
Select the device you want from the list of
found devices on your screen.
send information via Bluetooth
You can use your handset to send Contacts
entries, Datebook events, or audio files,
pictures, and videos in the media center to
another Bluetooth device.
2
Create a bond if you are prompted to do
so.
Tip: If you have previously connected to a
device, the device will be stored on your
phone so you can connect with it easily.
The receiving device must be within 32 feet
(10 meters) of your phone in order to connect
with yours.
use Bluetooth during a call
You can connect with available Bluetooth
devices during a call.
Note: Files sent or received may be up
to 6 MB, depending on your service
provider.
main attractions
71
send Contacts
Shortcut: From the home screen press
under Contcs.
1
2
Select the datebook event you want to
send.
-
Press
M
>
Send Via... > Bluetooth.
1
2
3
Select the contact you want to send.
If the event you select repeats, then you
will be prompted to choose whether to
send the selected instance of the event or
all instances of the event.
Press
M
>
Send Via... > Bluetooth.
Press
-
under Yes to power On
Bluetooth.
To send only the selected instance of the
4
Select the device you want to transfer the
contact information to.
event, select This Event Only
.
or
or
To send all instances of the event, select
Search for the device by selecting [Look for
Repeat Events
.
Devices]
.
3
4
Press
-
under Yes to power On
5
If prompted, bond with the device.
Bluetooth.
Your phone connects with the devices
and transfers the contact.
Select the device you want to transfer the
contact information to.
send a Datebook event
or
Find it:
M
>
m
>
Datebook
main attractions
72
Search for the device by selecting [Look for
Search for the device by selecting [Look for
Devices].
Devices]
.
5
If prompted, bond with the device.
4
If prompted, bond with the device.
Your phone connects with the device and
sends the datebook event.
Your phone connects with the device and
sends the datebook event.
send audio files, pictures, and videos
clock screen saver
Note: Note: You can only send audio files,
pictures, and videos if they are not forward
locked and if their DRM settings do not
prevent you from sending.
Your handset comes with a clock screen
saver that shows the time and day of the
month through the external display when this
one is in power save mode.
Find it:
M
>
j
>
Media Center
When a key is pressed the screen saver is
removed and the display lights up.
1
Select the audio file, picture, or video you
want to send.
Find it:
Saver.
M
>
u
>
Display/Info
>
Clock
>
Screen
2
3
Press
M
>
Send Via... > Bluetooth.
Select the device you want to transfer the
contact information to.
or
main attractions
73
You can choose from five different clock
styles:
External Clock 3
External Clock 2
External Clock 1
12
9
3
2:11pm
21
21
6
External Clock 5
External Clock 4
12
9
3
21
21
6
main attractions
74
basics
See page 1 for a basic phone diagram.
status indicators
Status indicators are shown at the top of the
home screen:
display
The home screen shows when you turn on
3.
5.
6. 7.
1. 2.
4.
the phone. To dial a number from the home
READY
4/25/07
screen, press number keys and
N.
Note: Your home screen may look different.
04
05pm
READY
4/25/07
Date
Contcs
Msgs
Time
04
1
Signal Strength Indicator: Vertical bars
show the strength of the network
05pm
connection. You can’t make or receive
Left Soft
Key Label
Right Soft
Key Label
calls when
1
or
0
shows.
Soft key labels show the current soft key
functions. For soft key locations, see page 1.
basics
75
2
3
Active Phone Line: 1 indicates phone line
1 is ready to make calls; 2 indicates phone
line 2 is ready to make calls.
main menu
All your phone’s features can be accessed
through the main menu. You can set the main
Speaker On/Off : Sounds associated
with Private calls and group calls can be
set to come through the earpiece rather
than through the speaker.
menu to appear as List View
,
Icon View, or as Tab
View
.
Find it:
M
>
u
>
Display/Info
>
Menu View
.
4
5
6
Ringer Vibe/Off: Your phone is set to not
ring.
text entry
Some features let you enter text.
Message Indicator: Shows when
you receive a text message.
Your phone provides convenient ways to
enter words, letters, punctuation, and
numbers whenever you are prompted to
enter text (for example, when adding a
Contacts entry or when using Text
Messaging).
Packet Data: Your handset is ready to
transfer packet data or is transferring
packet data when it shows a blinking
arrow.
7
Battery Charge Indicator: A fuller battery
indicates a greater charge. Recharge the
battery when your phone shows Low
Battery
.
basics
76
change the character input mode
word method
Word English Text Input method lets you
enter text into your phone by pressing keys
just once per letter.
1
When you see a screen where you can
enter text, press to change the
M
character input mode.
2
Select one of the following options:
Word English Text Input method analyzes the
letters you enter using an intuitive word
database and creates a suitable word. (The
word may change as you type.)
entry method
Alpha
Press a key several times for
different characters.
enter a word using “word” method
character input
Word
Enter words using a predictive
text entering system that lets
you enter a word with fewer
keypresses.
1
Select the Word character input method.
2
Press the corresponding keys once per
letter to enter a word (for example, to
enter the word Bill, press 2 4 5 5).
Symbols
Numeric
Enter symbols.
Enter numbers by pressing the
numbers on the keypad.
(If you make a mistake, press
a single character. Press and hold
delete an entire entry.)
*
to erase
to
*
Tip: When entering text, press
letter capitalization (Abc
* to change
abc).
>
ABC
>
3
To accept a word and insert a space,
press
#
.
basics
77
To accept a word completion (such as
Billion when you entered Bill), press
right.
Characters scroll in the following order:
characters
1
2
3
4
5
6
7
8
9
0
#
*
. ? ! , @ & : ; “ - ( ) ‘ ¿ ¡ % £ ¥
A B C 2 Á Ã Â À Ç
D E F 3 É Ê È
G H I 4 Í Ì
alpha method
To enter characters by tapping the keypad:
1
Select the Alpha method.
2
Press the corresponding keys repeatedly
until the desired letter appears. (For
J K L 5
M N ñ O 6 Ó Õ Ô Ò
P Q R S 7 ß
example, to enter the word Bill, press
twice, three times, three times,
and three times again. If you make a
2
4
5
T U V 8 Ú Ü Û Ù
W X Y Z 9
5
mistake, press Delete to erase a single
character. Press and hold Delete to erase an
entire word.)
+ - 0 * / \ [ ] = > < # §
Space
By default, the first letter of an entry is
capitalized and the following letters are
lowercased. After a character is entered, the
cursor automatically advances to the next
space after two seconds or when you enter a
character on a different key.
Back
basics
78
Note: The handsfree speaker won’t work
when your phone is connected to a handsfree
car kit or headset.
navigation key
Press the navigation key
up, down, left, or right
to scroll to items in the
display. When you scroll
to highlight the desired
transmitters
Note: Consult airline staff about the use of
the Transmitters feature during flight. Turn off
your phone whenever instructed to do so by
airline staff.
item, press
r.
handsfree speaker
You can use your phone’s handsfree speaker
to make calls without holding the phone to
your ear.
Transmitters turns off your phone’s calling
features in situations where wireless phone
use is prohibited, but you can use the phone’s
other non-calling features when Transmitters
is turned Off.
During a call (with the flip open), press
under Speaker to turn the handsfree speaker
On.
-
Find it:
M
>
u
>
Advanced > Transmitters > Off
.
The handsfree speaker stays on until you
press
-
under Speaker or close the flip.
basics
79
NMEA-0183 standard. Consequently it's
unsuitable for conventional marine NMEA-
0183 equipment use. Its intended use is for
normal "terrestrial" mobile users who want to
enable their USB hosting computing devices
such as a PC, laptop or PDA with the phone's
highly-capable GPS functionality.
use GPS with map
software
Your phone is enabled with a highly-capable
GPS receiver that sends location information
to a USB port on a PC, laptop, or PDA.
Note: No serial port connectivity is provided
by your phone. Applications on the host
device which are expecting to receive the
GPS location information via a serial port must
instead use a Virtual Serial Comm Port.
get connected
1
Slide open the phone's bottom
connector and insert a mini-USB cable
into the phone's bottom connector.
The data sent to the host device is formatted
as prescribed in the National Marine
Electronics Association 0183 V3.0 (NMEA-
0183) standard. As such it supports the
following sentences: GGA, GLL, GSA, GSV,
RMC, and VTG.
2
Insert the other end of the mini-USB cable
into a vacant USB receptacle of your host
device. A virtual USB Comm Port will be
created on your host device upon
successful enumeration of the phone as a
USB Communications Device Class
device.
This handset is not a full NMEA-0183
compliant device supporting electrical RS-
422/RS-232 connectivity as dictated by the
3
Ensure no application in your host device
is using the created COMM port. You
basics
80
may need to ensure that the created
virtual COMM port settings are set as
follows:
Your phone is now actively sending location
NMEA-0183 formatted GPS data to your USB
host device.
•
•
•
•
•
Bits per second: 4800
Data bits: 8
To stop your phone from sending location
data:
Find it:
Off.
M
>
m
>
GPS > Interface > NMEA OUT >
Parity: None
Stop bits: 1
Note: Each time you power your phone Off,
NMEA OUT is automatically set to Off and
you need to manually restart it using the
menu selections above.
Flow control: None.
4
5
Start the GPS application on your host
device. Set the GPS application to start
accepting NMEA-0183 formatted data
from the created Virtual COMM port.
Your USB host device will generally provide
charging power (5V, up to 500mA) to your
phone via the mini-USB cable therefore no
other charging power to it will normally be
required. However some laptops may require
that you provide external AC/DC power to the
laptop in order for it to provide full 500mA
charging current capability to the phone.
Set your phone to start sending NMEA-
0183 formatted location information.
Find it:
M
>
m
>
GPS > Interface > NMEA OUT >
USB.
basics
81
may need to adjust your hearing aid (HA)
volume setting.
features for the hearing
impaired
using your phone with a
hearing aid
For best results use the following
optimization procedures and handset setting.
They generally apply as well for users with
cochlear implants:
If your HA has a telecoil, activate its switch,
then also rotate the handset as illustrated to
align the telecoils.
optimize your handset position and
orientation
While in a phone call slide your phone up and
down, then left and right until best
Note: Some automatically switched hearing
aids may need an auxiliary switching magnet.
microphone coupling is obtained. You also
If you are unsure whether your HA is telecoil
equipped or needs an auxiliary magnet,
please refer to your HA user guide or contact
a hearing aid professional or supplier.
basics
82
choose your hearing aid setting
Find it: M> Settings > Phone Calls > Hearing Aid
Approximate telecoil location is within
6-13 mm of this location.
.
Off - Shut off
M - Microphone
T - Telecoil
1
Set this option to Microphone. Microphone
coupling is now optimized.
or
2
Set this option to Telecoil. Handset meets
US federal requirements for telecoil
coupling sound.
Approximate telecoil location is just
above the battery.
or
optimize your handset antenna
position
3
Set this option to Off (factory default). This
is the setting for non HA users.
Your phone’s rating for HA compatibility is
determined with the antenna extended if it
has an extendable antenna. However,
acceptable use might occur with the antenna
retracted. Test your handset in both antenna
positions when the handset is in the optimum
orientation.
features for the vision
impaired
voice playback
The Voice Playback feature allows you to use
a simulated voice to guide you through phone
basics
83
menus and through placing and receiving
phone calls.
Find it:
M
>
u
>
Voice Playback.
1
2
3
4
Select Speak Text
playback.
>
On for the navigation
You can hear the following as you use your
phone:
Select Speak Caller
phone number of incoming callers
>
On to hear the name or
•
•
The number keys you have pressed
The names, numbers, and contact
types of each contact entry as you
scroll through Contacts
Select Voice to choose either a female
voice (Barbara) or male voice (Simon).
Select Multimedia Volume and press the
volume keys up or down to adjust the
volume of voice playback.
•
The status information on the Home
screen, such as signal strength, battery
level, date and time, and service status
high contrast theme
Note: When you access the idle
screen, you will hear “Home”
Your handset comes with a standard high
contrast theme that provides black and white
text with reverse text highlighting and very
large icons for easy visualization of selection.
•
•
•
Main menu options as you scroll
through the main menu
A prompt indicating that your phone is
placing a call
Find it:
M
>
u
>
Display/Info
>
Theme
>
High
Contrast
.
The name of incoming callers rather
than a ring tone
basics
84
calls
To make and answer calls, see page 18.
•
•
•
•
short text messages received
pictures sent or received
turn off a call alert
You can press the volume keys to turn off a
call alert before answering the call.
Datebook events received
Location information received
The recent calls list displays up to 20 of the
most recent calls and call alerts.
recent calls
The recent calls list contains information
associated with calls you have made and
received and call alerts you have received.
1
2
Press
M
>
Recent Calls
.
Scroll through the list.
store an item to contacts from
recent calls
Phone calls, Private calls, My Info, Contacts or
Location entries received from other phones
can be stored to the Contacts list from the
Recent Calls list.
When you send or receive Private calls, the
recent call list contains the following PTV
items with those calls:
•
•
contact information received
My Info received
calls
85
Find it:
M
>
Recent Calls.
caller ID
1
Scroll to or select the item you want to
store.
Caller ID allows people to identify a caller
before answering the phone by displaying the
number of the incoming call. If you do not
want your number displayed when you make
a call, just follow these easy steps.
2
Press
-
under Save to store the
information as a new entry in the
Contacts list.
or
To block your phone number from being
displayed for a specific outgoing call:
3
4
If Save is not one or you options, press
M
>
Update Contacts. And select the contact you
1
2
3
Press * 6 7
Enter the number you want to call.
Press
.
want to update.
Press under Save to save your
changes.
-
N
.
To permanently block your number, call your
customer service provider.
redial
To redial your last outgoing call, press and
hold or push the PTT button if it was a
private call.
call forward
Call forwarding sends calls to the phone
numbers you specify. You can forward all calls
to one number or forward missed calls to
N
calls
86
different numbers depending on the reason
you missed the call. You can forward phone
lines 1 and 2 independently.
voice names
You can place calls by speaking comands to
your phone if you have previously assigned a
voice name to your contacts.
Find it:
M
>
u
>
Phone Calls > Call Forward.
1
To forward all calls select All Calls and
select To to enter the phone number you
assign voice names to contacs
1
2
3
4
Press
Contact].
-
under Contcs and select [New
want all your calls forwarded to.
or
Assing a name, phone number and select
[Options]
2
You can specify a forwarding number for
each type of missed call by selecting
Detailed and chosing the following options:
.
Select Voice Name and follow the propmt to
record the voice name.
If Busy: When your handset is on a call or
transferring data.
Press
-
under Back and
-
under Save.
If No Answer: When you do not answer on
the first 4 rings.
place a call using voice name
With the flip closed or open, press the
speaker key until you are prompted to
say the voice name.
The handset will automatically place the call.
1
If Unreachable: When your handset is out of
coverage or powered off.
t
calls
87
When you make an emergency call, your
phone’s GPS Enabled feature can help
emergency calls
Your service provider programs one or more
emergency phone numbers that you can call
under any circumstances, even when your
phone is locked or the SIM card is not
inserted.
emergency service personnel find you, if you
are in a location where your phone's GPS
antenna has established a clear view of the
open sky and your local emergency response
center has the equipment to process location
information. Because of the limitations of this
feature, always provide your best knowledge
of your location to the emergency response
center when you make an emergency call.
Note: Emergency numbers vary by country.
Your phone’s preprogrammed emergency
number(s) may not work in all locations, and
sometimes an emergency call cannot be
placed due to network, environmental, or
interference issues.
Note: Emergency calls cannot be placed
while the keypad is locked.
Your phone supports emergency calling.
Emergency phone calls can be made even
when your SIM card is blocked or not in your
phone.
Note: If you have not registered on the
network, emergency calls cannot be placed
while your SIM card is in your phone.
Dial 911 or your local emergency number to
be connected to an emergency response
center. If you are on an active call, you must
end it before making an emergency call.
international calls
If your phone service includes international
dialing, press and hold 0 to insert your local
calls
88
international access code (indicated by +).
Then, press the keypad keys to dial the
country code and phone number.
voicemail
Note: To receive voice mail messages, you
must first set up a voice mail account with
your service provider.
speed dial
Each phone number stored in Contacts is
assigned a Speed Dial number, which you can
use to call that number.
receiving a message
When you receive a voice mail message, New
VoiceMail Message appears on the display.
To call your service provider’s voice mail
system and listen to the message:
1
From the home screen, use the keypad to
enter the Speed Dial number assigned to
the phone number you want to call.
To check voicemail messages:
Press the soft key under Call
.
2
3
Press
Press
#
N
.
.
To dismiss the message notification:
If the flip is closed, press the smart key
the top.
.
on
turbo dial
The first nine entries in your contacts are set
for turbo dial. They can be called by pressing
and holding the speed dial number
(1 through 9).
If the flip is open, press
flip.
r
,
Back, or close the
calls
89
If the caller leaves a message, this icon
appears on the display, reminding you that
you have a new message.
y
are not readable by an older iDEN SIM-based
phone.
You can use Send via PTT to send SDG
lists to other phones that have this
capability.
selective dynamic
group (SDG) calls
create SDG lists in contacts
A SDG call is similar to a Private call, but is
made to all members of a SDG list at once. A
SDG list is a group of Private IDs that you
create using your phone. A SDG list must
contain at least 2 members and can contain
up to 20 members.
Shortcut: From the home screen press
under Contcs
-
.
1
Select [New SDG List].
Tip: You can also create a SDG list by
selecting [New Contact] and assigning the
SDG contact type. See “store a phone
number or private ID” on page 20.
You can create a SDG list for one call only or
store it to Contacts so you can call it any time.
2
If you want to assign a name to the SDG
list, enter the name.
Note: In order to store SDG lists to your
phone, you must use a SDG-capable SIM
card. For more information about SDG-
capable SIM cards, contact your service
provider. SDG lists created with your phone
Note: If you do not assign a name, the
SDG list is named “SDG” followed by the
number of members in the SDG list. For
calls
90
example, “SDG (8)” for a SDG list with 8
members.
checkmark appears next to each selected
item.
3
4
Add Private IDs. See “Adding Private
Numbers” below.
Tip: To deselect a selected item, highlight it
and press
r.
If you want to create a voice name for the
You can also enter Private IDs from the
keypad.
SDG list, select [Options]
>
Voice Name. As
directed by the screen prompts, say and
repeat the voice name you want to assign
to the SDG list. Speak clearly into the
microphone.
add members from Contacts,
the recent calls list, or Memo
1
While creating a SDG list, select [Add
Member] or select [Add Number] and press
under Browse.
5
Press
-
under Save.
-
add private numbers
Tip: To move between Contacts, the
recent calls list, and Memo, scroll
or right.
You can add Private IDs to a SDG list by
selecting them from Contacts, the recent
calls list, or memo. You can add all members
in an existing SDG list by selecting the list.
left
2
Scroll to the members you want from
Contacts, the recent calls list, or Memo,
and press . A checkmark appears next
to each selected member.
You can select more than one member from
Contacts and the recent calls list. A
r
calls
91
Tip: To deselect a selected member, highlight
it and press
4
5
Press
Press
M
>
Remove Member
.
r
.
-
under Save
.
3
Press
-
under Done.
remove all members from a SDG list
1
From Contacts, scroll to the SDG list you
want to delete the member from.
add members manually from
the keypad
2
3
4
Press
Press
Press
-
M
-
under Edit
.
1
While creating a SDG list, select [Add
>
Remove All Members
.
Number]
.
under Yes to confirm.
2
Enter the Private number using the
keypad.
delete a SDG list from Contacts
1
Scroll to the SDG list you want to delete.
remove members or SDG lists
2
Press
M
>
Delete SDG List.
remove a member from a SDG list
1
From Contacts, scroll to the SDG list you
want to delete the member from.
make SDG Calls
1
From Contacts or the recent calls list,
scroll to or select the SDG list you want.
or
2
3
Press
-
under Edit.
Scroll to the member you want to
remove.
calls
92
Press and hold
t
until a prompt appears
1
From the home screen, enter the Private
ID.
telling you to say the voice name. Say the
voice name assigned to the SDG list you
want.
or
From the Contacts list, scroll to an entry
containing the Private ID.
or
From the home screen, press the number
on your keypad for the shortcut you
assigned to the SDG list you want.
or
From recent calls list, scroll to an entry
containing the Private ID.
or
2
3
Press
M
>
Call SDG.
Enter or select a Private ID and add more
Private IDs. “start a SDG call with a
private” below.
Add more Private IDs. See “add private
numbers” on page 91.
If you want to save the SDG list you have
2
Push the PTT button.
created press
M
>
Store SDG.
start a SDG call with a private
or
You can start a SDG call with any Private ID
you want to call.
If you do not want to save the SDG list,
press under Done
-
.
Note: Choose the first Private ID that you
want in the SDG call:
4
Push the PTT button to make the call.
calls
93
SDG call Information
While you are in a SDG call, the following
appears on the screen:
T
A
O
U
u
The member of the SDG list who is
speaking.
A member of the SDG list who is active
on the SDG call, but not speaking.
•
•
The name of the SDG list
A member of the SDG list who has
exited the call.
The name or the Private ID of the
person speaking
A member of the SDG list who could not
be reached on the SDG call.
•
The number of participants in the SDG
call
A member of the SDG list whose status
is unknown.
SDG Call Details
During a SDG call, you can view details about
the other SDG list members, such as their
name or Private ID, and their status on the
call. To view SDG call details, press
-
under
Details
.
In the SDG Call Details view, these icons
appear next to member names or Private IDs:
calls
94
customize
volume
ring tones
Press the volume
keys to:
To set the ring tone your phone makes when
you receive phone calls, call alerts, message
notifications, pictures sent using Send via PTT
or Datebook reminders:
•
•
•
turn off an
incoming call alert
Note: Only ring tones stored in your phone’s
memory are available in the ring tones list. To
assign a ring tone stored on a memory card
inserted in your phone’s memory card slot,
you must go to the media center. Not all audio
files can be assigned as ring tones.
change the
earpiece volume during calls
change the ringer volume from the
home screen
Tip: You you can quickly set your ringer
to Vibrate All by holding the down volume
key in the home screen.
Find it:
M
>
j
>
Ring Tones
1
2
Make sure Vibrate All is set to Off
.
Scroll through the list of ring tones and
select the one you want to assign. Vibrate
customize
95
sets your phone to vibrate instead of
making a sound; Silent sets your phone to
neither vibrate nor make a sound.
Set this option to On or Locked.
Setting this option to On lets you turn Vibrate All
off by pressing the up volume control. Setting
this option to Locked requires you to press and
hold the up volume control to turn Vibrate All
off. The Locked option helps prevent you from
accidentally turning Vibrate All off.
Tip: Highlighting a ring tone lets you hear it.
3
Select the features you want to assign the
ring tone to.
4
When you are finished, press
-
under
Tip: To set Vibrate All to On or Locked using the
volume controls: Press the volume controls to
turn down the volume as far as possible to set
Vibrate All to On. Continue to hold the down
Done
.
Note: This icon
you set your phone to Silent. This icon
appears on the display if you set the phone to
M
appears on the display if
Q
volume control to set Vibrate All to Locked
.
Vibrate All
.
To set your phone to vibrate instead of
making a sound for some features but not
others:
set your phone to vibrate
You can set your phone to vibrate instead of
making a sound when you receive all phone
calls, Private calls, group calls, SDG calls, call
alerts, messages notifications, pictures sent
using Send via PTT, and Datebook reminders.
Find it:
M
>
j
>
Ring Tones
Make sure Vibrate All is set to Off
Select Vibrate from the list of ring tones.
.
1
2
.
Find it:
96
M
>
j
>
Ring Tones
>
Vibrate All
customize
3
4
Select the features you want to set to
make no sound.
datebook
Find it:
M
>
m
>
Datebook
>
M
>
Setup.
When you are finished, press
-
under
You can view or change these options:
Done
.
options
wallpaper
Set a photo or picture as a wallpaper
(background) image in your phone’s external
display, home screen or throughout all menu
screens.
Start View: Sets Datebook to start in day view,
week view, or month view when you
access Datebook.
Daily Begin: Sets the beginning of your day.
This is the earliest time of day displayed in
week view, if you have a 12-hour day view.
Find it:
To select a wallpaper image:
Scroll through the list of pictures and
M
>
u
>
Display/Info
>
Wallpaper.
Delete After: Sets the amount of time
Datebook waits to delete an event after it
occurs.
1
press to select the picture of your
r
Time Shift: Lets you shift the times of all
Datebook events. This is useful if you are
traveling to a different time zone.
choice.
Note: You can set the wallpaper to change
automatically after a certain period of time by
turning on the Auto Cycle feature located in the
Wallpaper menu.
Alert Timeout: Sets the amount of time a tone
continues to sound when you receive a
Datebook reminder.
customize
97
purposes except 911, but will not hide your
general location based on the cell site serving
your call. No application or service may use
your location without your request or
permission. GPS-enhanced 911 is not
available in all areas.
options
Clock: Controls whether the time and date
appear on the home screen; sets time and
date format; sets year.
hide or show
set your Privacy Options
location information
Find it:
M
>
m
>
GPS Privacy.
>
Your phone is equipped with a Location
feature for use in connection with location-
based services that may be available in the
future.
Select from the following options:
option
Restricted: No Java or similar software
applications may view the location of your
phone. However, location information may
still be available to the phone’s owner, fleet
manager, or account administrator.
The Location feature allows the network to
detect your position. Turning Location off will
hide your location from everyone except 911.
Note: Turning Location On will allow the
network to detect your position using GPS
technology, making some applications and
services easier to use. Turning Location off
will disable the GPS location function for all
Unrestricted: All applications may view the
location of your phone, without notifying
you.
customize
98
option
By Permission: When an application attempts
to view the location of your phone, you will
be prompted to give permission. However,
location information may still be available to
the phone’s owner, fleet manager, or
account administrator.
customize
99
other features
advanced calling
feature
feature
3-way call
Make or receive a phone call
and press 3 Way. Enter
the second phone number,
press and under Join.
M
>
call waiting To accept the second call
and put the active call on
N
-
hold press
-
under Yes.
For quick ways to enter the
number, press to see
the dialing menu.
To accept the second call
and end the active call press
M
O
.
You cannot make any other
calls after you have joined a
3-way call, even if one party
disconnects.
Your phone rings with the
second call for you to
answer.
other features—advanced calling
100
alarm clock
feature
feature
flip
activation
To make your handset to
answer and end calls by
opening and closing the flip
access
To access the alarm clock
alarm clock press
M
>
T
>
Alarm Clock
press
M
>
u
>
Phone Calls
Plus
>
Flip Activation
Select Flip To Ans
to End On
.
To set the alarm clock press
under Set. Use to set
the desired time and press
under Done.
stop watch To access the stop watch
>
On and Flip
-
>
.
any key
answer
To answer phone calls by
pressing any key on the
-
keypad press
M
>
u
>
On
press
M
M
>
>
T
Stopwatch
>
Alarm Clock
Phone Calls
>
Any Key Ans
>
.
Plus
>
Press
- under Start
quick timer To access the quick timer
press
M
M
>
>
T
>
Alarm Clock
Quick Timer
Plus
>
Use
time and press
to set the desired
-
under
Start
other features—alarm clock
101
contacts
feature
feature
do not
disturb
To access Do not disturb
press
M
>
>
T
>
Alarm Clock
edit/delete
contact
entry
Press
Select a contact and press
Edit. Change the
desired content and press
-
under Contacts.
Plus
>
M
Do Not Disturb.
Press
- under Yes.
M
>
“Do Not Disturb”mode will
allow you to turn off your
phone’s transmitters. When
your phone is set to Do Not
Disturb, no incoming phone or
private calls will be received.
-
under Save
.
set ringer ID Press
-
under Contacts.
Select a contact and press
M
>
Edit [Ring Tone/Picture].
>
Select desired ringer and
press under Back
under Save
Press under Contacts.
Select a contact and press
-
>
-
Note: Alarm Clock features only work when
the handset is powered On.
set picture
ID
-
M
>
Edit [Ring Tone/Picture].
>
Select desired picture and
press under Back
under Save
-
>
-
other features—contacts
102
datebook
feature
feature
receive
datebook
events via
PTT
To view the information
while still in the Private call
create
datebook
events
To create a new Datebook
event press
Datebook > [New Event].
press
r.
M
>
m>
The 5 most recent events
received from a Private ID
are stored with the that
Private ID on the recent
calls list.
see datebook To see a calendar event
event
press
Press
M
>
m
>
Datebook.
left or right to see
up or down
the day and
to see the events.
To store events to the
Datebook press
-
under
event
reminder
When an event reminder
Save while viewing the event
you want to store.
occurs press
Press under Back to close
the reminder.
-
under View.
-
other features—datebook
103
GPS
feature
set GPS
privacy
options
To set the level of privacy
for your GPS system press
Note: To improve GPS performance:
•
•
Stay in the open
M
>
m
>
GPS
>
Privacy.
Move away from other electrical or
electronic devices
If your GPS PIN security
feature is enabled, enter
your GPS PIN and select the
privacy option you want.
•
•
Remain stationary.
Avoid touching the antenna with your
hands.
change GPS Note: When you receive
PIN
your phone, your GPS PIN is
0000.
feature
view
approximate location press
To see your approximate
To change your GPS PIN
M
>
m
>
press
M
>
m
>
>
Security
>
location Position. Scroll to view
GPS
>
Change Passwords
GPS PIN.
the entire screen.
Enter the current GPS PIN
and enter the new 4- to 8-
digit GPS PIN. Re-enter the
new 4- to 8-digit GPS PIN to
confirm.
To recalculate position press
Refresh. This may take several
minutes.
other features—GPS
104
handsfree
feature
auto
answer
To automatically answer
calls when connected to a
Note: The use of wireless phones while
driving may cause distraction. Discontinue a
call if you can't concentrate on driving.
Additionally, the use of wireless devices and
their accessories may be prohibited or
restricted in certain areas. Always obey the
laws and regulations on the use of these
products.
car kit or headset press
M
>
u
>
Phone Calls
>
Auto Ans.
Select the amount of rings
before answering.
feature
speaker-
phone
Activate the speakerphone
while driving:
Press and hold the
speakerphone key
t
or
press
-
under Options
>
Speaker
.
other features—handsfree
105
memory card
feature
feature
manage
memory
To view your used memory,
free memory, memory
capacity, and number of
files in phone memory press
change
storage
To choose whether media
items are saved to your
preferences phone's memory or to the
memory card press
M
>
j
>
Memory Usage.
M
Store Media
>
To free memory on your
phone, delete items from
the media center, voice
records, or Java
applications. To free
memory on the memory
card, delete items from the
card's folders.
u
>
Memory Card
>
>
On Phone or Prefer On Card.
Note: If the memory card is
not in the phone, even if you
choose Prefer On Card, the
media items are saved to
your phone's memory.
other features—memory card
106
pc applications
feature
feature
menu style
To display the main menu as
tabs, graphic icons or a text-
other PC
For a list of complete PC
based list press
M
> u>
applications applications visit
Display/Info
>
Menu View.
www.motorola.com/iden
clock
display
To display the clock on the
home screen press
M
>
u
>
Display/Info
On
>
Clock
>
personalize
feature
Display
>
language
To set the language of your
menu press
TTY
feature
M
Language.
>
u
>
Display/Info
>
backlight
To select how long the
turn On TTY From the home screen
feature press
time length display screen and keypad
M
>
u
>
Phone Calls
are backlit press
M
>
>
u
Timer.
>
TTY
>
Use TTY
>
On.
>
Display/Info
>
Backlight
choose TTY From the home screen
mode press Phone Calls
M
>
u
>
>
TTY
>
Type.
Select from TTY, VCO or HCO.
other features—pc applications
107
feature
feature
change the
TTY baud
rate
From the home screen
press
keypad lock To lock the keypad press
M
>
u
>
Phone Calls
M
>
>
u
>
Security
>
Keypad
>
TTY
Select 45.45 or 50.00
change TTY While in the TTY call, press
>
Baud.
Lock
Lock Now or Auto Lock
Shortcut: To lock the
keypad press
enable SIM To enable SIM PIN, press
PIN
M
>
*
mode
during a call
M
>
In Call Setup
>
TTY
>
Type.
M
>
u
>
Security
>
SIM PIN
>
Select from TTY, VCO or HCO
.
On
.
change SIM To change the SIM PIN,
PIN press
security
feature
M
>
u
>
Security
SIM PIN
>
Change Passwords
>
.
phone lock
To lock the phone press
M
>
Note: You can make emergency calls on a
>
u
>
Security
>
Phone Lock
locked phone (see page 88). A locked phone
still rings or vibrates for incoming calls or
messages, but you need to unlock it to
answer.
Lock Now or Auto Lock.
other features—security
108
Important Safety and
Legal Information
109
Safety and General Information
Safety Information
This section contains important information on the safe and
•
•
•
•
•
United States Federal Communications Commission, Code
of Federal Regulations; 47 CFR part 2 sub-part J.
efficient operation of your phone. Read this information
before using your integrated multi-service portable radio.*
American National Standards Institute (ANSI) / Institute of
Electrical and Electronics Engineers (IEEE). C95. 1-1992.
Exposure to Radio Frequency (RF)
Energy
Your phone contains a transmitter and receiver. When it is ON, it
receives and transmits RF energy. When you communicate with
your phone, the system handling your call controls the power level
at which your phone transmits.
Your Motorola phone is designed to comply with local regulatory
requirements in your country concerning exposure of human beings
to RF energy.
Institute of Electrical and Electronics Engineers (IEEE).
C95. 1-2005 Edition.*
International Commission on Non-Ionizing Radiation
Protection (ICNIRP) 1998.
Ministry of Health (Canada). Safety Code 6. Limits of
Human Exposure to Radio frequency Electromagnetic
Fields in the Frequency Range from 3 kHz to 300 GHz,
1999.
•
•
Australian Communications Authority Radio
communications (Electromagnetic Radiation - Human
Exposure) Standard 2003.
Portable Radio Product Operation and
EME Exposure
ANATEL, Brazil Regulatory Authority, Resolution 303 (July
2, 2002) "Regulation of the limitation of exposure to
Your Motorola radio product is designed to comply with the
following national and international standards and guidelines
regarding exposure of human beings to radio frequency
electromagnetic energy (EME):
*
The information provided in this document supersedes
the general safety information in user’s guides
published prior to May 1, 2006
Safety Information
110
electrical, magnetic, and electromagnetic fields in the
radio frequency range between 9 kHz and 300 GHz."
"Attachment to Resolution 303 from July 2, 2002."
When using your radio product as a traditional
two-way radio, hold the radio product in a
vertical position with the microphone one
to two inches (2.5 to 5 cm) away from the
lips
.
Operational Precautions
To assure optimal radio product performance and to be sure that
human exposure to RF does not exceed the guidelines set forth in
the relevant standards, always follow these instructions and
precautions:
If you wear a radio product on your body when
transmitting, always place the radio product in a Motorola
approved clip, holder, holster, case or body harness. If you do not
use a body-worn accessory supplied or approved by Motorola and
are not using the radio product in the intended use positions along
side the head in the phone mode or in front of the face in the
two-way radio mode, or if you hang your device from a lanyard
around your neck, keep the device at least 2.5 centimeters (1 inch)
from your body when transmitting.
Phone Operation
When placing or receiving a phone call, hold your radio product as
you would a wireline telephone. Speak directly into the
microphone
.
Approved Accessories
Two-way radio operation
For a list of approved Motorola accessories call 1-800-453-0920, or
visit our website at www.motorola.com/iden.
Your radio product has been designed and tested to comply with
national and international standards and guidelines regarding
human exposure to RF electromagnetic energy, when operated in
the two-way mode (at the face, or at the abdomen when using an
audio accessory) at usage factors of up to 50% talk/50% listen.
RF Energy Interference/Compatibility
Nearly every electronic device is subject to RF energy interference
from external sources if inadequately shielded, designed or
otherwise configured for RF energy compatibility. In some
circumstances your handset may cause interference with other
devices.
Transmit no more than the rated duty factor of 50% of the time. To
transmit (talk), push the PTT button. To receive calls, release the
PTT button. Transmitting 50% of the time or less, is important
because this radio generates measurable RF energy only when
transmitting (in terms of measuring for standards compliance).
Safety Information
111
your wireless phone with your implantable medical device, consult
your health care provider.
Follow Instructions to Avoid Interference
Problems
Turn OFF your radio product where posted notices instruct you to
Hearing Aids
Some phones may interfere with some hearing aids. In the event of
such interference, you may want to consult your hearing aid
manufacturer or physician to discuss alternatives.
do so.
In an aircraft, turn off your radio product whenever instructed to do
so by airline staff. If your radio product offers an airplane mode or
similar feature, consult airline staff about using it in flight.
Other Medical Devices and Health Care Facilities
Implantable Medical Devices
If you have an implantable medical devices, such as a pacemaker
or defibrillator, consult your physician before using this radio
product.
If you use any other personal medical devices, consult your
physician or the manufacturer or your device to determine if it is
adequately shielded from RF energy. Turn off your radio product
when instructed to do so in hospitals or health care facilities that
may be using equipment that is sensitive to external RF energy.
Persons with implantable medical devices should observe the
following precautions:
Driving Precautions
•
ALWAYS keep the phone more than 20 centimeters (8
inches) from the implantable medical device when the
phone is turned ON.
Check the laws and regulations on the use of radio products in the
area where you drive. Always obey them.
•
•
DO NOT carry the phone in a breast pocket;
When using your radio product while driving, please:
Use the ear opposite the implantable medical device to
minimize the potential for interference.
•
Give full attention to driving and to the road. Using a
phone may be distracting. Discontinue a call if you can’t
concentrate on driving.
•
Turn OFF the phone immediately if you have any reason to
suspect that the interference is taking place.
•
•
Use hands free operation, if available.
Read and follow the directions from the manufacturer of your
implantable medical device. If you have any questions about using
Pull off the road and park before making or answering a
call if driving conditions so require.
Safety Information
112
•
Do not place a handset in the airbag deployment area.
Batteries and Chargers
Responsible driving practices can be found in the “Smart Practices
While Driving” section at the end of this guide and/or at the
Motorola Web site: www.motorola.com/callsmart.
Caution: Improper treatment or use of batteries may present
a danger of fire, explosion, leakage, or other hazard. For
more information, see the “Battery Use and Battery Safety”
section in this user’s guide.
Your battery, charger, or portable radio may contain symbols,
defined as follows:
Note: The use of wireless phones while driving may cause
distraction. Discontinue a call if you can’t concentrate on driving.
Additionally, the use of wireless devices and their accessories may
be prohibited or restricted in certain areas. Always obey the laws
and regulations on the use of these products.
Symbol
Definition
032374o
Important safety information
follows.
Operational Warnings
Obey all posted signs when using phones in public areas.
Do not dispose of your battery
or phone in a fire.
Potentially Explosive Atmospheres
Your battery or phone may
require recycling in
Areas with potentially explosive atmospheres are often but not
always posted, and can include fueling areas such as below decks
on boats, fuel or chemical transfer or storage facilities, or areas
where the air contains chemicals or particles, such as grain, dust
or metal powders.
032375o
accordance with local laws.
Contact your local regulatory
authorities for more
information.
When you are in such area, turn off your handset, and do not
remove, install, or charge batteries unless it is a radio product type
especially qualified for use in such areas as “Intrinsically Safe” (for
example, Factory Mutual, CSA, or UL approved). In such areas,
sparks can occur and cause an explosion or fire.
Do not throw your battery or
phone in the trash.
Your phone contains an
internal lithium ion battery.
Li Ion BATT
032378o
Safety Information
113
If you have experienced seizures or blackouts, or if you have a
family history of such occurrences, please consult with your
physician before playing video games or enabling a flashing-lights
feature (if available) on your phone.
Symbol
Definition
Do not let your battery,
charger, or phone get wet.
Discontinue use and consult a physician if any of the following
symptoms occur: convulsion, eye or muscle twitching, loss of
awareness, involuntary movements, or disorientation. It is always
a good idea to hold the screen away from your eyes, leave the
lights on in the room, take a 15-minute break every hour, and stop
use if you are very tired.
Listening at full volume to
music or voice through a
headset may damage your
hearing.
Choking Hazards
Your portable radio or its accessories may include detachable
parts, which may present a choking hazard to small children. Keep
your device and its accessories away from small children.
Caution About High Volume Usage
Listening at full volume to music or voice through a
headset may damage your hearing.
Glass Parts
Some parts of your phone may be made of glass. This glass could
break if the product is dropped on a hard surface or receives a
substantial impact. If glass breaks, do not touch or attempt to
remove. Stop using your phone until the glass is replaced by a
qualified service center.
Repetitive Motion
When you repetitively perform actions such as pressing keys or
entering finger-written characters, you may experience occasional
discomfort in your hands, arms, shoulders, neck, or other parts of
your body. If you continue to have discomfort during or after such
use, stop use and see a physician.
Seizures/Blackouts
Some people may be susceptible to epileptic seizures or blackouts
when exposed to flashing lights, such as when playing video
games. These may occur even if a person has never had a previous
seizure or blackout.
Safety Information
114
Service & Repairs
If you have questions or need assistance, we’re here to help.
Motorola Customer Support Center at 1 (800) 453-0920 (United
States), 1 (877) 483-2840 (TTY, TDD United States for hearing
impaired).
Go to www.motorola.com/iden, where you can select from a
number of customer care options. You can also contact the
Export Law Assurances
Service
&
Repairs
This product is controlled under the export regulations of the
United States of America and Canada. The Governments of the
United States of America and Canada may restrict the exportation
or re-exportation of this product to certain destinations. For further
information contact the U.S. Department of Commerce or the
Canadian Department of Foreign Affairs and International Trade.
Service & Repairs
115
Specific Absorption Rate Data
SAR Data
ALL MODELS WITH FCC ID IHDT56HF1 MEET THE
general, the closer you are to a wireless base station antenna, the
lower the power output.
GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO
WAVES.
Before a phone model is available for sale to the public, it must be
tested and certified to the FCC that is does not exceed the limit
established by the requirement adopted by the government for
safe exposure. The tests are performed in positions and locations
(e.g., at the ear and worn on the body) as required by the FCC for
each model. The highest SAR value for this model phone when
tested for use at the ear is 1.31 W/kg and when tested on the
body, as described in this user guide, is 1.51 W/kg during packet
data transmission. (Measurements for phones worn on the body
differ among models, depending upon available accessories and
FCC requirements.)2
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal
Communications Commission of the U.S. Government. These limits
are part of comprehensive guidelines and establish permitted
levels of RF energy for the general population. The guidelines are
based on standards that were developed by independent scientific
organizations through periodic and thorough evaluation of
scientific studies. The standards include a substantial safety
margin designed to assure the safety of all persons, regardless of
age and health.
While there may be differences between the SAR levels of various
phones and at various positions, they all meet the government
requirement for safe exposure. Please note that improvements to
this product model could cause differences in the SAR value for
later products; in all cases, products are designed to be within the
guidelines.
The exposure standard for wireless mobile phones employs a unit
of measurement known as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6W/kg.1 Tests for SAR are
conducted using standard operating positions reviewed by the FCC
with the phone transmitting at its highest certified power level in
all tested frequency bands. Although the SAR is determined at the
highest certified power level, the actual SAR level of the phone
while operating can be well below the maximum value. This is
because the phone is designed to operate at multiple power levels
so as to use only the power required to reach the network. In
Additional information on Specific Absorption Rates (SAR) can be
found on the Cellular Telecommunications Industry Association
(CTIA) web-site at http://www.ctia.org or the Canadian Wireless
Telecommunications Association (CWTA) Web site:
http://www.cwta.ca
SAR Data
116
1. In the United States and Canada, the SAR limit for mobile
phones used by the public is 1.6 watts/kg (W/kg) averaged over
one gram of tissue. The standard incorporates a substantial margin
of safety to give additional protection for the public and to account
for any variations in measurements.
2. The SAR information includes the Motorola testing protocol,
assessment procedure, and measurement uncertainty range for
this product.
SAR Data
117
Limited Warranty Motorola Communications Products
(International)
Warranty
Rechargeable Batteries will be replaced during the applicable
What Does this Warranty Cover?
warranty period if:
MOTOROLA warrants the MOTOROLA manufactured iDEN
•
•
the battery capacity falls below 80% of rated capacity, or
the battery develops leakage.
Communication Products listed below (“Product”) against defects
in material and workmanship under normal use and service for a
period of time from the date of purchase as scheduled below:
MOTOROLA, at its option, will at no charge either repair the
Product (with new or reconditioned parts), replace it (with a new or
reconditioned Product), or refund the purchase price of the Product
during the warranty period provided it is returned in accordance
with the terms of this warranty. Replaced parts or boards are
warranted for the balance of the original applicable warranty
period. All replaced parts of Product shall become the property of
MOTOROLA.
Products Covered
Length of Coverage
iDEN Suscriber
Digital Mobile and
Portable Units
One (1) year from the date of
purchase by the first consumer
purchaser of the product unless
otherwise provided for below.
Product Accesories
(manufactured by or
under license from
MOTOROLA).
One (1) year from the date of
purchase by the first consumer
purchaser of the product unless
otherwise provided for below.
This express limited warranty is extended by MOTOROLA to the
original end user purchaser only and is not assignable or
transferable to any other party. This is the complete warranty for
the Product manufactured by MOTOROLA. MOTOROLA assumes
no obligations or liability for additions or modifications to this
warranty unless made in writing and signed by an officer of
MOTOROLA. Unless made in a separate agreement between
Batteries.
One (1) year from the date of
purchase by the first consumer
purchaser of the product unless
otherwise provided for below.
Warranty
118
MOTOROLA and the original end user purchaser, MOTOROLA does
not warrant the installation, maintenance or service of the Product.
INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH
MAY BE DISCLAIMED BY LAW.
MOTOROLA cannot be responsible in any way for any ancillary
equipment not furnished by MOTOROLA which is attached to or
used in connection with the Product, or for operation of the Product
with any ancillary equipment, and all such equipment if expressly
excluded from this warranty. Because each system which may use
the Product is unique, MOTOROLA disclaims liability for range,
coverage, or operation of the system as a whole, or any portion of
the system not produced by MOTOROLA, under this warranty.
How to Get Warranty Service:
You must provide proof of purchase (bearing the date of purchase
and Product item serial number) in order to receive warranty
service and, also, deliver or send the Product item, transportation
and insurance prepaid, to an authorized warranty service location.
Warranty service will be provided by MOTOROLA through one of
its authorized warranty service locations. If you first contact the
company which sold you the Product (e.g., dealer or
General Provisions:
This warranty sets forth the full extent of MOTOROLA’S
communication service provider), it can facilitate your obtaining
warranty service.
responsibilities regarding the Product, Repair, replacement or
refund of the purchase price, at MOTOROLA’S options, is the
exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL
OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES,
INLCUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY TO
THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW. IN NO
EVENT SHALL MOTOROLA BE LIABLE FOR DAMAGES IN EXCESS
OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF
USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST
PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR
What This Warranty Does Not Cover:
•
•
•
Defects or damage resulting from use of the Product in
other than its normal and customary manner.
Defects or damage from misuse, accident, water, or
neglect.
Defects or damage from improper testing, operation,
maintenance, installation, alteration, modification, or
adjustment.
•
Breakage or damage to antennas unless caused directly by
defects in material workmanship.
Warranty
119
•
A Product subjected to unauthorized Product
modifications, disassembles or repairs (including, without
limitation, the audition to the Product of non-MOTOROLA
supplied equipment).
Patent and Software Provisions:
MOTOROLA will defend, at its own expense, any suit brought
against the end user purchaser to the extent that it is based on a
claim that the Product or parts infringe a patent, and Motorola will
pay those costs and damages finally awarded against the end user
purchaser in any such suit which are attributable to any such
claim, but such defense and payments are conditioned on the
following:
•
•
Product which has had the serial number removed or made
illegible.
Rechargeable batteries if:
Any of the seals on the battery enclosure of cells are
broken or show evidence of tampering.
•
That MOTOROLA will be notified promptly in writing by
such purchaser of any notice of such claim;
The damage or defect is caused by charging or using the
battery in equipment or service other than the Product for
which it is specified.
•
That MOTOROLA will have sole control of the defense of
such suit and all negotiations for its settlement or
compromise; and
•
•
Freight costs to the repair depot.
•
Should the Product or parts become, or in MOTOROLA’S
opinion be likely to become, the subject of a claim of
infringement of a patent, that such purchaser will permit
MOTOROLA, at its option and expense, either to procure
for such purchaser the right to continue using the Product
or parts or to replace or modify the same so that it
becomes non infringing or to grant such purchaser a credit
for the Product or parts as depreciated and accept its
return. The depreciation will be an equal amount per year
over the lifetime of the Product or parts as established by
MOTOROLA.
A Product which, due to illegal or unauthorized alteration
of the software/firmware in the Product, does not function
in accordance with MOTOROLA’S published specifications
or the local type acceptance labeling in effect for the
Product at the time the Product was initially distributed
from MOTOROLA.
•
Scratches or other cosmetic damage to Product surfaces
that does not effect the operation of the Product.
•
•
Normal and customary wear and tear.
Exclusion for defects or damage arising from use of the
products in connection with non-MOTOROLA equipment.
MOTOROLA will have no liability with respect to any claim of
patent infringement which is based upon the combination of the
Warranty
120
Product or parts furnished hereunder with software, apparatus or
devices not furnished by MOTOROLA, nor will MOTOROLA have
any liability for the use of ancillary equipment or software not
furnished by MOTOROLA which is attached to or sued in
connection with the Product or any parts thereof. In no event shall
MOTOROLA be liable for any incidental, special or consequential
damages arising from any claim of patent infringement or alleged
infringement.
Laws in the United States and other countries preserve for
MOTOROLA certain exclusive rights for copyrighted MOTOROLA
software, such as the exclusive rights to reproduce in copies and
distribute copies of such MOTOROLA software. MOTOROLA
software may be used in only the Product in which the software
was originally embodied and such software in such Product may
not be replaced, copied, distributed, modified in any way, or used
to produce any derivative thereof. No other use including, without
limitation, alteration, modification, reproduction, distribution, or
reverse engineering of such MOTOROLA software or exercise or
rights in such MOTOROLA software is permitted. No license is
granted by implication, estoppel or otherwise under MOTOROLA
patent rights or copyrights.
Warranty
121
Hearing Aid Compatibility
HAC
A number of Motorola phones have been tested for hearing aid
“M” Rating: Phones rated M3 or M4 meet FCC requirements for
hearing aid compatibility and are likely to generate less
interference to hearing aids than unrated phones. (M4 is the
“better” or higher of the two ratings.) On those models with an
extendable antenna, this rating is determined only with the
antenna extended.
compatibility. When some wireless phones are used with certain
hearing aids, users may detect a noise which can interfere with
the effectiveness of the hearing aid.
Some hearing aids are more “immune” than others to this
interference noise, and phones can also vary in the amount of
interference noise they may generate. ANSI standard C63.19 was
developed to provide a standardized means of measuring both
mobile phone and hearing aids to determine usability rating
categories for both.
“T” Rating: Phones rated T3 or T4 meet FCC requirements and are
likely to be more usable with a hearing aid's telecoil (“T Switch” or
“Telephone Switch”) than unrated phones. (T4 is the “better” or
higher of the two ratings.) On those models with a telecoil mode
setting, this rating is determined only with the phone so set. For
setting instructions, see “Features for the Hearing Impaired” in the
section entitled “Advanced Calling Features”. Note that not all
hearing aids have telecoils in them.
Ratings have been developed for mobile phones to assist hearing
aid users find phones that may be compatible with their hearing
aid. Not all phones have been rated for compatibility with hearing
aids. Phones that have been rated have a label with the rating(s)
located on the box, and at www.motorola.com/accessibility.
Hearing aids may also be measured for immunity to interference
from wireless phones and may have ratings similar to wireless
phones. Ask your hearing health care professional for the rating of
your hearing aid. Add the rating of your hearing aid and your phone
to determine the estimated usability:
These ratings are not guarantees of compatibility. Results will vary
depending on the user's hearing aid and individual type and degree
of hearing loss. If a hearing aid is particularly vulnerable to
interference, even a phone with a higher rating may still cause
unacceptable noise levels in the hearing aid Trying out the phone
with your hearing aid is the best way to evaluate it for your
personal needs.
•
Any combined rating equal to or greater than six offers
excellent use.
•
Any combined rating equal to five is considered normal
use.
HAC
122
•
Any combined rating equal to four is considered usable.
Thus, if you use an M3 phone with a M3 hearing aid you will have
a combined rating of six for “excellent use.” This methodology
applies equally for T ratings.
More information about hearing aid compatibility may be found at:
www.motorola.com/accessibility, www.fcc.gov, www.fda.gov, and
www.hearingloss.org/learn/cellphonetech.asp
HAC
123
Information From the World Health Organization
WHO Information
Present scientific information does not indicate the need for any
special precautions for the use of mobile phones. If you are
concerned, you may want to limit your own or your children’s RF
exposure by limiting the length of calls or by using hands-free
devices to keep mobile phones away from your head and body.
Source: WHO Fact Sheet 193
Further information: http://www.who.int./peh-emf
Product Registration
Registration
Online Product Registration:
http://direct.motorola.com/hellomoto/
Motosupport/source/registration.asp
Product registration is an important step toward enjoying your new
Motorola product. Registering helps us facilitate warranty service,
and permits us to contact you should your product require an
update or other service. Registration is for U.S. residents only and
is not required for warranty coverage.
Please retain your original dated sales receipt for your records. For
warranty service of your Motorola Personal Communications
Product you will need to provide a copy of your dated sales receipt
to confirm warranty status.
Thank you for choosing a Motorola product.
WHO Information
124
Wireless: The New Recyclable
Recycling
Your wireless phone can be recycled. Recycling your phone
As a phone user, you have an important role in ensuring that this
device is recycled properly. When it comes time to give this phone
up or trade it in for a new one, please remember that the phone,
the charger, and many of its accessories can be recycled. It's easy.
To learn more about CTIA's Recycling Program for Used Wireless
Devices, please visit us at:
reduces the amount of waste disposed in landfills and allows
recycled materials to be incorporated into new products.
The Cellular Telecommunications Industry Association (CTIA) and
its members encourage consumers to recycle their phones and
have taken steps to promote the collection and environmentally
sound recycling of end-of-life devices.
http://recycling.motorola.young-america.com/ index.html
California Perchlorate Label
Perchlorate Label
Some mobile phones use an internal, permanent backup battery on
the printed circuit board that may contain very small amounts of
perchlorate. In such cases, California law requires the following
label:
“Perchlorate Material - special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.”
There is no special handling required by consumer.
Recycling
125
Patent and Trademark Information
Patent and Trademark
MOTOROLA, the Stylized M Logo and all other trademarks
Software Copyright Notice
indicated as such herein are trademarks of Motorola, Inc. ® Reg.
U.S. Pat. & Tm. Off. © 2007 Motorola, Inc. All rights reserved.
The Motorola products described in this manual may include
copyrighted Motorola and third party software stored in
semiconductor memories or other media. Laws in the United
States and other countries preserve for Motorola and third party
software providers certain exclusive rights for copyrighted
software, such as the exclusive rights to distribute or reproduce
the copyrighted software. Accordingly, any copyrighted software
contained in the Motorola products may not be modified,
reverse-engineered, distributed, or reproduced in any manner to
the extent allowed by law. Furthermore, the purchase of the
Motorola products shall not be deemed to grant either directly or
by implication, estoppel, or otherwise, any license under the
copyrights, patents, or patent applications of Motorola or any third
party software provider, except for the normal, non-exclusive,
royalty-free license to use that arises by operation of law in the
sale of a product.
Microsoft and Microsoft Internet Explorer are registered
trademarks of Microsoft Corporation.
T9 is a trademark owned by Tegic Communications.
T9® Text Input Patent and Trademark Information.
This product is covered by U.S. Pat. 5,818,437, U.S. Pat. 5,953,541,
U.S. Pat. 6,011,554 and other patents pending.
Java and all other Java-based marks are trademarks or registered
trademarks of Sun Microsystems, Inc. in the U.S. and other
countries.
All other product names or services mentioned in this manual are
the property of their respective trademark owners.
Patent and Trademark
126
Privacy and Data Security
Privacy and Data Security
Motorola understands that privacy and data security are important
•
Understanding AGPS: In order to comply with
to everyone. Because some features of your phone may affect your
privacy or data security, please follow these recommendations to
enhance protection of your information:
emergency caller location requirements of the FCC, certain
Motorola phones incorporate Assisted Global Positioning
System (AGPS) technology. AGPS technology also can be
used in non-emergency applications to track and monitor a
user’s location, for example, to provide driving directions.
Users who prefer not to permit such tracking and
•
Monitor access: Keep your phone with you and do not
leave it where others may have unmonitored access. Lock
your device’s keypad where this feature is available.
monitoring should avoid using such applications.
•
Keep software up to date: If Motorola or a
software/application vendor releases a patch or software
fix for your phone which updates the device’s security,
install it as soon as possible.
If you have further questions regarding how use of your phone may
impact your privacy or data security, please contact Motorola at
[email protected], or contact your service provider.
•
Erase before recycling: Delete personal information or
data from your phone prior to disposing of it or turning it in
for recycling. For step-by-step instructions on how to
delete all personal information from your device, please
contact your local service provider.
Privacy and Data Security
127
Smart Practices While Driving
Driving Safety
Drive Safe, Call Smart SM
road. If you receive an incoming call at an inconvenient
time, if possible, let your voice mail answer it for you.
Check the laws and regulations on the use of phones and
their accessories in the areas where you drive. Always
obey them. The use of these devices may be prohibited or
restricted in certain areas. Go to www.motorola.com/callsmart
for more information.
Your phone lets you communicate by voice and data, almost
anywhere, anytime, wherever wireless service is available and
safe conditions allow. When driving a car, driving is your first
responsibility. If you choose to use your phone while driving,
remember the following tips:
•
•
•
Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy
traffic or hazardous weather conditions. Rain, sleet,
snow, ice, and even heavy traffic can be hazardous.
Do not take notes or look up phone numbers while
driving. Jotting down a “to do” list or going through your
address book takes attention away from your primary
responsibility, driving safely.
Dial sensibly and assess the traffic; if possible,
place calls when your car is not moving or before
pulling into traffic. If you must make a call while
moving, dial only a few numbers, check the road and your
mirrors, then continue.
•
Get to know your Motorola phone and its features
such as speed dial and redial. If available, these
features help you to place your call without taking your
attention off the road.
•
When available, use a hands-free
device. If possible, add an additional
layer of convenience to your phone with
one of the many Motorola Original
hands-free accessories available today.
•
•
Do not engage in stressful or emotional
conversations that may be distracting. Make people
you are talking with aware you are driving and suspend
conversations that can divert your attention away from the
road.
•
Position your phone within easy reach. Be able to
access your phone without removing your eyes from the
Use your phone to call for help. Dial 911 or other local
emergency number in the case of fire, traffic accident, or
medical emergencies.**
Driving Safety
128
•
•
Use your phone to help others in emergencies. If you
see an auto accident, crime in progress, or other serious
emergency where lives are in danger, call 911 or other
local emergency number, as you would want others to do
for you.**
Call roadside assistance or a special
non-emergency wireless assistance number when
necessary. If you see a broken-down vehicle posing no
serious hazard, a broken traffic signal, a minor traffic
accident where no one appears injured, or a vehicle you
know to be stolen, call roadside assistance or other
special non-emergency wireless number.*
*
Wherever wireless phone service is available.
Driving Safety
129
index
battery charging 15
battery indicator 76
battery installation 15
Bluetooth
Calls
SDG, see SDG calls
camera 36, 39
digital viewfinder 41
photo editor 41
record video 40
self-timer 40
center key 79
center select key 10
clock 107
clock screen saver 73
contacts 102
edit/delete 102
set picture ID 102
set ringer ID 102
A
accessories 10, 105
active phone line 76
advanced calling 100
3-way calls 100
call waiting 100
alarm clock 101
do not disturb 102
quick timer 101
stop watch 101
alert
connect 70
send information 71
setting your phone 69
turning on or off 69
bluetooth 69
C
call
set 95, 96
answer 18
any key answer 101
end 18
turn off 85, 95
answer a call 18
make 18
call forward 86
caller ID 86
B
D
backlight 107
datebook 103
index
130
create events 103
receive events
via PTT 103
Hearing Aid
Compatibility 122
home screen 75
F
features for the vision
impaired 83
flip 18
flip activation 101
frequently asked questions
service and repairs 115
setup 97
view reminders 103
dial a phone number 18
dialed calls 85
display 75
Drafts 24
see also text messages,
drafts
I
Icons
SDG 94
international calls 88
G
GPS 104
L
approximate location 104
privacy options 104
GPS enabled
emergency calls 88
GPS, see GPS enabled
language 107
low battery message 76
E
earpiece volume 95
emergency number 88
end a call 18
end key 18
export regulations 115
M
main menu 76
make a call 18
media center 36
memory card 11, 106
manage memory 106
ring tones 95
H
handsfree 105
auto answer 105
speaker-phone 105
handsfree speaker 79
index
131
storage preferences 106
menu style 107
Message center
text messages 23
message indicator 76
MMS 53
modem
using your
handset as a 27
music player 29
received calls 85
recycling 125
redial 86
ring style indicator 76
ring style, setting 95
ring tones
off 96
setting 95
vibrate 96
ring tones, setting 95
ringer volume 95
P
PC applications 107
personalize 107
phone number 22
power key 17
private calls
answer 20
call alerts 19
make 18
receive a call alert 20
PT Manager 53
PTV features 43
PTX manager 53
N
navigation key 10, 79
S
O
safety
radio frequency 110
RF energy
interference 111
safety information 110
safety tips 128
SDG calls
Q
one touch PTT 51
optional accessory 10, 105
optional feature 10
quick notes
create, edit 23, 24
optional features 10
R
radio frequency 110
icons 94
index
132
lists, adding numbers 91
lists, creating 90
lists, deleting 92
lists, removing
members 92
starting 93
SDG list
save entries 52
security 108
Selective Dynamic Group
Calls, see SDG calls
send key 18
signal strength indicator 75
SIM card 11
setting up 89
voice names 87
voicemail 89
voicemail message
indicator 89
T
text 22
text entry 76
alpha method 78
word method 77
text messages 22, 27
creating 24
volume 95
deleting 25, 26
drafts 24
memory 25
message center 23
receiving 23
resend messages 25
sending 24
W
wallpaper 97
WHO information 124
Y
your phone number 22
change SIM PIN 108
enable SIM PIN 108
soft keys 75
sent messages 25
setting up 22
TTY calls 107
speaker 76
speed dial 89
store your number 22
V
video 41
voice mail
index
133
index
134
www.motorola.com
NNTN7280B
|