Motorola
iDEN®
Digital Multi-Service Data-Capable Phone
i30sx Phone User’s Guide
@NNTN4196A@
NNTN4196A
Introduction .......................................................................................... 7
Driving Safety Tips .........................................................................................8
Getting Started.................................................................................... 11
i30sx Phone Features.....................................................................................12
Battery ...........................................................................................................12
Enabling Security ..........................................................................................18
Receiving Over-the-Air Programming..........................................................18
Keypad Lock .................................................................................................28
Status of Your i30sx Phone...........................................................................31
My Information .............................................................................................32
Using T9® Text Input ...................................................................................33
Display Essentials ............................................................................... 39
Display Screen Elements...............................................................................39
Call Information Icons...................................................................................42
Navigating Menus and Lists..........................................................................43
Main Menu Options.......................................................................................44
Phonebook........................................................................................... 47
Accessing Phonebook with an i2000, i2000plus, or GSM Phone.................48
Phonebook Entries and Speed Dial Numbers................................................48
Phonebook Icons ...........................................................................................48
Accessing Your Phonebook ..........................................................................49
About Phonebook Entries..............................................................................50
Pause Digit Entry...........................................................................................59
Plus Dialing ...................................................................................................60
i
Digital Cellular.................................................................................... 61
Making Phone Calls ......................................................................................61
Emergency Calling........................................................................................66
Receiving a Phone Call .................................................................................66
Ending a Phone Call......................................................................................67
Recent Calls...................................................................................................67
Call Timers....................................................................................................71
Call Waiting ..................................................................................................72
Call Hold .......................................................................................................74
Three-Way Calling........................................................................................75
Call Forwarding.............................................................................................76
Messages .............................................................................................. 81
Message Center .............................................................................................81
Voice Mail.....................................................................................................82
Using Voice Mail ..........................................................................................83
Text and Numeric Messaging........................................................................84
Net Alert........................................................................................................86
Using Your Phone as a Modem.....................................................................87
Private Calls........................................................................................ 89
Private Call....................................................................................................89
Call Alerts......................................................................................................91
Group Call.....................................................................................................95
Memo ................................................................................................... 99
Adding a New Memo ....................................................................................99
Viewing a Memo...........................................................................................99
Editing a Memo...........................................................................................100
Deleting a Memo.........................................................................................100
Customizing the i30sx phone ........................................................... 101
Settings........................................................................................................101
www.motorola.com/iden
ii
Accessories......................................................................................... 115
Batteries.......................................................................................................115
Travel Chargers ...........................................................................................116
Data Accessories .........................................................................................118
Other Important Information ......................................................... 123
Understanding Status Messages ..................................................................123
Safety and General Information ..................................................... 125
RF Operational Characteristics ...................................................................125
Electro Magnetic Interference/Compatibility..............................................128
Medical Devices..........................................................................................128
Operational Warnings..................................................................................130
Operational Cautions...................................................................................131
Accessory Safety Information.....................................................................133
Limited Warranty Motorola Communication Products...............................135
Limited Warranty Motorola Communication Products (International) ......139
Patent and Trademark Information..............................................................143
Index .................................................................................................. 145
IMPORTANT!
Read “Safety and General Information” on page 125
before using your i30sx phone.
iii
www.motorola.com/iden
iv
DECLARATION OF CONFORMITY
Per FCC CFR 47 part 2 Section 2.1077(a)
Responsible party name:
Motorola Inc.
Address:
8000 West Sunrise Boulevard,
Plantation, FL 33322 USA
1 (800) 453-0920
Phone number:
Hereby declares that the product:
Product name:
Model Number:
i30sx
H56XAH6RR5AN
Conforms to the following regulation:
FCC Part 15, subpart B
Class B Computer peripheral
Date: December 17, 2001
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
v
www.motorola.com/iden
vi
Introduction
ongratulations on purchasing your Motorola iDEN
multi-service, data-capable, digital, portable phone. Your i30sx
Cphone offers:
•
Phonebook — Your consolidated Phonebook holds up to 250 entries and
allows you to store multiple contact numbers for each person, offering you
various ways to communicate with your business and personal contacts.
•
SIM Card — Your phone’s SIM card holds all entries stored in your
Phonebook. In addition, you have a PIN (Personal Identification Number)
to keep your information safe and secure.
•
•
Messages — The Message Center allows you to manage and access your
Voice Mail, Text Messages and Net Alert all from the same inbox.
Private and Group Calls — You can use your phone as a two-way radio
to communicate directly with business and personal contacts in your iDEN
service area.
•
•
Fax and Data Transfer — for circuit data faxes and file transfers.
Faceplates — You can order additional faceplates to change the look of
your phone.
For more information on these and other features of the i30sx phone, review this
User’s Guide. There is a Table of Contents in the front of the guide and an Index
in the back of the guide to assist you in finding the specific information you
want.
NOTE:Some features of your i30sx phone are available only in the
iDEN service area, and are indicated as such in this guide.
NOTE:This guide describes the features of the i30sx phone as they
were set up by Motorola. However, your Service Provider or
your organization may have changed or added features. For
more information, check with your Service Provider or your
organization.
7
Driving Safety Tips
“Safety is your most important call!”
Your Motorola wireless telephone gives you the powerful ability to
communicate by voice — almost anywhere, anytime, wherever wireless phone
service is available and safe conditions allow. But an important responsibility
accompanies the benefits of wireless phones, one that every user must uphold.
When driving a car, driving is your first responsibility. If you find it necessary to
use your wireless phone while behind the wheel of a car, practice good common
sense and remember the following tips:
1. Get to know your Motorola wireless phone and its features such as speed
dial and redial. If available, these features help you to place your call with-
out taking your attention off the road.
2. When available, use a hands-free device. If possible, add an additional
layer of convenience to your wireless phone with one of the many Motor-
ola Original hands-free accessories available today.
3. Position your wireless phone within easy reach. Be able to access your
wireless phone without removing your eyes from the road. If you receive
an incoming call at an inconvenient time, if possible, let your voice mail
answer it for you.
4. Let the person you are speaking with know you are driving; if necessary,
suspend the call in heavy traffic or hazardous weather conditions. Rain,
sleet, snow, ice, and even heavy traffic can be hazardous.
5. If you receive an incoming call at an inconvenient time do not take notes or
look up phone numbers while driving. Jotting down a “to do” list or going
through your address book takes attention away from your primary respon-
sibility — driving safely.
6. Dial sensibly and assess the traffic; if possible, place calls when you are not
moving or before pulling into traffic. Try to plan calls when your car will
be stationary. If you need to make a call while moving, dial only a few
numbers, check the road and your mirrors, then continue.
7. Do not engage in stressful or emotional conversations that may be distract-
ing. Make people you are talking with aware you are driving and suspend
conversations which have the potential to divert your attention away from
the road.
8. Use your wireless phone to call for help. Dial 9-1-1 or other local emer-
1
gency number in the case of fire, traffic accident or medical emergencies.
www.motorola.com/iden
8
Driving Safety Tips
9. Use your wireless phone to help others in emergencies. If you see an auto
accident, crime in progress or other serious emergency where lives are in
danger, call 9-1-1 or other local emergency number, as you would want
*
others to do for you.
10. Call roadside assistance or a special non-emergency wireless assistance
number when necessary. If you see a broken-down vehicle posing no seri-
ous hazard, a broken traffic signal, a minor traffic accident where no one
appears injured, or a vehicle you know to be stolen, call roadside assistance
1
or other special non-emergency wireless number.
1. Wherever wireless phone service is available.
9
www.motorola.com/iden
10
This section includes:
i30sx Phone Features
Page 12
Page 12
Page 15
Page 17
Page 18
Page 18
Page 18
Page 31
Page 32
Page 33
Battery
i30sx Phone Faceplates and Keypads
Turning Your i30sx Phone On/Off
Enabling Security
Receiving Over-the-Air Programming
Security Features of the i30sx Phone
Status of Your i30sx Phone
My Information
Using T9® Text Input
11
i30sx Phone Features
Lanyard Hook
Antenna
Earpiece
Volume Keys
Display
Push-To-Talk (PTT) Button
Menu Key
Option Key*
Battery
Send Key
Option Key*
4-Way Navigation
Joystick
AlphaNumeric
Keypad
End/Home Key
Photosensor
Power On/Off
Microphone
Punctuation Key
Back/Pause Dialing Key
Headset Jack
Next Word/International
Plus Dialing Key
SIDE VIEW
TOP VIEW
Speaker Key
Faceplate
Release Button
BOTTOM VIEW
Status Light
Accessory and Data
Cable Connector
* Throughout this User’s Guide, the option keys
A and B will be represented by C.
Battery
Your i30sx phone comes with a Lithium Ion battery. After attaching the battery,
you must charge it before you use it for the first time. See “Charging Lithium
Ion Batteries” on page 115 for the charging times for your phone’s battery. The
first time you charge your phone’s battery, charge for 30 minutes more than the
time shown on page 115. After the initial charging, the battery can be charged in
the time shown on page 115.
Instructions for Attaching and Detaching the battery may be found on Page 13.
www.motorola.com/iden
12
Battery
Attaching the Battery
Insert the top of the battery into the battery area under the housing
retention hooks. Press down on the bottom of the battery to secure it.
Push down on the battery until you hear a click.
Detaching the Battery
1
2
Ensure the phone is powered off before attempting to detach the battery.
Press the battery release button away from the antenna and slide the
battery cover away from the antenna.
3
Remove the battery by pushing the battery toward the antenna and
lifting it out of the phone.
13
Charging the Battery
1
With your phone’s keypad facing up, plug the
charger’s accessory connector into the left side of the
accessory connector on the bottom of the phone.
2
3
If the charger has folding electrical prongs, flip open the prongs.
Plug the charger into an electrical outlet.
NOTE: Your phone’s screen backlight will remain lit while the battery is
charging.
Battery Charging Status
The battery strength indicator icon found on your phone’s display screen shows
the charge amount remaining in the battery. Refer to Battery Charging, Table .
Battery Charging
When Using Phone
Icon
a
b
c
d
Display
Battery
Strength
Low
Battery
11% - 40%
41% - 70%
Fully Charged
(90% -100%)
NOTE: A short, chirp-like sound indicates a low battery. This indicates
that you have approximately five minutes of talk time remaining.
www.motorola.com/iden
14
i30sx Phone Faceplates and Keypads
When Charging Battery
Icon
Display
e
f
g
h
1 flashing bar
1 flashing bar,
1 continuous bar 2 continuous bars
1 flashing bar,
3 continuous bars
Battery
Strength
Low
Battery
31% - 60%
61% - 90%
Fully Charged
(90% -100%)
NOTE: During the charging process, the battery icon will be flashing. In
addition, when the battery is fully charged, the battery icon will
show a fully charged battery.
i30sx Phone Faceplates and Keypads
Your i30sx phone comes with a standard faceplate and keypad. You can order
additional face plates and keypads to change the look of your phone.
The following steps and accompanying illustration detail the procedure for
removing and replacing the changeable faceplate and keypad.
NOTE: Before replacing the faceplate, ensure that the keypad is
present and undamaged. For security and operational reasons,
power to the i30sx phone should be off prior to performing the
removal and replacement procedure. There is a protective
plastic liner over the lens. Peel off prior to operation.
Removal and Replacement Procedure
1
While holding the back of the phone, press the
faceplate release button located at the bottom of
the phone to release the faceplate. When you
press the release button, ensure that both sides
are disengaged from the faceplate prior to
removal.
Release Button
2
In an upward motion, grasp the bottom part of the faceplate and detach
it from the phone.
15
3
Remove the keypad from the phone (or from the faceplate).
4
5
To replace the faceplate and keypad, lay the keypad on the phone body.
As shown in the illustration, attach the faceplate to the phone body, first
at the top and then at the bottom. The top of the faceplate needs to be
securely seated into the top of the phone. Rotate faceplate towards
bottom of the phone until the lower snaps are engaged. Snap
engagement will be verified by a clicking sound. After the lower snaps
are engaged, verify that the middle of the faceplate is engaged by
pressing the faceplate near the s and r keys. This will be verified by
a clicking sound.
6
Re-apply power to the phone by pressing and holding p near the
bottom of the phone until the status light glows red and a tone briefly
sounds.
www.motorola.com/iden
16
Turning Your i30sx Phone On/Off
Turning Your i30sx Phone On/Off
To power the phone on:
1
2
For optimal signal strength, extend the antenna.
Press and hold p near the bottom of the phone until the status light
glows red and a tone briefly sounds.
3
If the Enter SIM PIN Code screen displays, enter your SIM PIN. (For
more information see “SIM Card Personal Identification Number
(PIN)” on page 19.)
NOTE: The default SIM card PIN is 0000. It is recommended that you
change your PIN to prevent fraudulent use of the SIM card
(see “Changing the PIN” on page 21).
4
Press C under OK.
As your phone connects to the network,
you will see a welcome message and a
connecting message. When the Ready
screen appears on the display, you are
ready to use your i30sx phone!
A
To power the phone off:
1
2
Press and hold p near the bottom of the phone until you see the
message Powering Off.
Push down the antenna.
17
Enabling Security
To utilize browser functionality from your service provider, you must enable
security the first time you power on your phone or within 20 days of first
activation of your phone.
1
When you power on your phone for the
first time, after the Ready screen appears,
you will be prompted to select OK to
update your browser info.
NOTE: If you press C under LATER,
you will be prompted to enable
security each time you power on
your phone until you press C
under OK. It is recommended
that you do not choose LATER.
a
2
3
Press C under OK.
You are prompted to enable security. Press C under YES.
A series of screens display. If you subscribe to your service provider
plan, your home page displays.
4
Press r to return to the Ready screen.
Receiving Over-the-Air Programming
If you have been set up to receive Over-the-Air Programming by your service
provider, you will receive your Private ID and Talkgroup lists for Private Call
use, and your Personal Telephone Number via a Net Alert message.
In order to receive your programming, you must have enabled security. Within
24 hours of enabling security, you will receive a Net Alert message containing
your lists.
To accept your phone programming:
1
2
You will receive a Net Alert with the message New Browser Message –
Receive Programming Info.
Press C under GOTO.
www.motorola.com/iden
18
Security Features of the i30sx Phone
3
You are prompted to accept changes to your phonebook. Press C
under OK.
4
5
A confirmation screen displays. Press C under OK.
You are prompted again to accept changes to your phonebook. Press
C under OK.
6
7
A confirmation screen displays. Press C under OK.
Press r to return to the Ready screen.
Security Features of the i30sx Phone
SIM Card
Your phone comes with a built-in level of security protection through the use of
the SIM (Subscriber Identity Module) card. The SIM card stores all your
Phonebook information. Since this information is stored on the SIM card, not in
your phone itself, you can remove the information by removing the SIM card.
The SIM card is located in the SIM Card Holder on the back of the phone,
underneath the battery. You can verify that the SIM card is in place by removing
the battery and viewing the SIM card through the SIM card holder.
See “Inserting/Removing the SIM Card” on page 25 for information on locating
the SIM card. If there is no SIM card in your phone, notify your sales
representative.
NOTE: Except for making emergency calls, your phone will not
function without the SIM card.
SIM Card Personal Identification Number (PIN)
To prevent unauthorized use of your phone, your SIM card is protected by a
PIN. Each time the phone is powered on, you must enter your PIN. You can
change or disable your PIN if desired.
NOTE: Disabling your PIN enables anyone to use your phone. If you
disable your PIN, you must still keep the SIM card in the phone
to make calls.
19
Entering the PIN
Depending on your service provider, your phone
may or may not require you to enter a SIM PIN
when you first use your phone.
If your phone is set to require you to enter a PIN,
your default SIM card PIN is: 0000. It is
recommended that you change your PIN to
prevent fraudulent use of the SIM card (see
“Changing the PIN” on page 21).
Incorrectly entering your PIN three times
causes the SIM card to be blocked. To
IMPORTANT:
unblock your SIM card, you must contact
your service provider. For more
information, see “Unblocking the PIN” on
page 22.
1
2
From the Enter SIM PIN screen, enter your four- to eight-digit PIN.
An asterisk appears for each character entered.
NOTE: Other than emergency dialing, you will be unable to use any
of the phone functions, including receiving phone calls, until
you enter the PIN.
Press C under OK.
If you enter an incorrect PIN, the message SIM PIN incorrect: Try again
appears on your phone’s screen. After three consecutive incorrect attempts, the
SIM card is blocked. The phone does not allow you to attempt to enter your PIN
again, even after powering the phone off and back on. If this happens, see
“Unblocking the PIN” on page 22.
www.motorola.com/iden
20
Security Features of the i30sx Phone
Changing the PIN
1
At the Ready screen, press q and
then press R to scroll to Settings.
B
2
3
Press C under SELECT. The Settings screen displays.
Press R to scroll to Security. Press C
under SELECT to access the Security
screen.
j
At the New Passwords screen, press R to scroll to SIM PIN and press
4
5
6
At the Security screen, press R to scroll to New Passwords. Press C
under SELECT to access the New Passwords screen.
C under SELECT.
At the Enter Old SIM PIN Code screen, enter the current SIM PIN
and press C under OK.
NOTE: The default SIM is 0000.
7
8
At the Enter New SIM PIN Code screen, enter the new 4- to 8-digit
SIM PIN and press C under OK.
At the Re-enter New SIM PIN Code screen, re-enter the new SIM PIN
to confirm, and press C under OK.
21
Unblocking the PIN
If you forget your PIN and unsuccessfully enter it three times, access to your
phone will be blocked.
NOTE: Before you begin, obtain the PIN Unblocking Key (PUK) code
from your service provider, then read and understand the PIN
unblocking sequence. When entering the key press sequence,
each key press must occur within 5 seconds of the prior key
press.
If you unsuccessfully enter the PUK code
ten times, the SIM card is permanently
blocked and must be replaced. If this
happens, all data will be lost. You will get a
message to contact your service provider. If
the SIM card is blocked, the i30sx phone
only allows outgoing Emergency calls.
IMPORTANT:
To unblock the PIN:
1
2
3
4
5
Press *
*
0
5
s.
Enter the PUK code.
Press s.
Enter a new 4- to 8-digit SIM PIN and press s.
Re-enter your SIM PIN and press s.
If you entered the codes properly, the SIM Unlocked screen displays.
www.motorola.com/iden
22
Security Features of the i30sx Phone
Disabling/Enabling the PIN Requirement
When the PIN requirement is enabled, you are
prompted to enter your PIN each time you turn
on your phone. Until a valid PIN is entered, you
can use the phone only to make emergency calls.
After the PIN is accepted, the phone registers on
the network and the Ready screen displays.
When the PIN requirement is disabled, the phone
can be used without entering a PIN.
P
If you disable the PIN requirement, you
remove protection of personal data on your
IMPORTANT:
SIM card. Anyone can then use your phone
and access your personal data.
1
At the Ready screen, press q and
then press R to scroll to Settings.
B
2
Press C under SELECT. The Settings screen displays.
23
3
Press R to scroll to Security. Press C
under SELECT to access the Security
screen.
j
Press R to scroll to On or Off. On enables the SIM PIN requirement;
4
5
6
At the Security screen, press R to scroll to SIM PIN. Press C under
SELECT to access the SIM PIN screen.
Off disables the SIM PIN requirement. Press C under SELECT.
At the Verify SIM PIN Code screen, enter the current SIM PIN and
press C under OK.
www.motorola.com/iden
24
Security Features of the i30sx Phone
Inserting/Removing the SIM Card
If you remove your SIM card and insert
another SIM card into your phone, the
following information is erased when you
use the phone with the new SIM card:
IMPORTANT:
•
•
•
•
•
Recent Calls list
Call Forwarding settings
Net Alerts
Information stored in Memo
Browser bookmarks
All Phonebook information will remain
stored on your original SIM card.
Do not touch the gold-colored areas of the
SIM card.
To avoid loss or damage, do not remove
your SIM card from your phone unless
absolutely necessary.
To insert the SIM card
1
2
With the phone powered off, remove the battery cover and battery. See
“Detaching the Battery” on page 13.
With the antenna facing away from you
and the back of the phone exposed and
facing up, locate the SIM card holder.
SIM card
holder
25
3
4
Hold the SIM card with the gold contact
side facing down and the cut corner in the
upper left. Do not touch the gold-colored
areas of the SIM card.
cut corner
Carefully slide the SIM card with the cut
corner in the upper left position into the
phone, until it lies flat in the SIM card
holder.
Cut Angled
Corners
To Remove the SIM Card
NOTE: To remove your SIM card, you will need a ballpoint pen (or
another slightly pointed object).
1
With the phone powered off, remove the battery cover and battery. See
“Detaching the Battery” on page 13.
www.motorola.com/iden
26
Security Features of the i30sx Phone
2
3
4
With the antenna facing away from you
and the back of the phone exposed and
facing up, insert the tip of a ballpoint pen
into the slot at the bottom of the SIM card,
along the left edge of the SIM card.
slot
With your other hand, gently press the
PUSH tab on top of the SIM card. Hold this
tab down.
tab
While holding the tab down, slide the SIM card up by moving the
ballpoint pen in the direction of the arrow within the slot.
27
5
When the ballpoint pen has moved the SIM card up as much as
possible, very carefully lift the SIM card out of the phone. Do not touch
the gold-colored areas of the SIM card.
NOTE: Protect the SIM card as you would any delicate object. When
the SIM card is not in the phone, you should store it in
something protective, such as a mailing envelope.
Keypad Lock
The i30sx phone includes a Keypad Lock feature that enables you to quickly
lock the phone’s keypad to avoid inadvertently pressing keys or placing calls.
Once Keypad Lock is activated, you can only perform the following tasks:
•
•
•
Turn your phone on and off
Unlock the keypad
Receive incoming calls, messages, and alerts.
NOTE: Emergency calls cannot be placed while Keypad Lock is
activated.
Before locking your phone’s keypad, you may want to read this entire section to
learn how to respond to incoming calls, messages, and alerts.
Activating Keypad Lock
From the Ready screen, press q *.
The message Keypad Locked displays on
your phone.
D
Whenever a key is pressed while in Keypad Lock mode, the unlock instructions
display briefly.
www.motorola.com/iden
28
Keypad Lock
Receiving Incoming Calls
When you receive an incoming phone call (see “Receiving a Phone Call” on
page 66), Keypad Lock is temporarily disabled.
1
Press C under YES or press s to answer the call. When you end the
call, the Recent Calls list appears. Press s or press C under EXIT to
reactivate Keypad Lock and return to the Ready screen.
Or,
Press C under NO or press s to send the call to Voice Mail and
reactivate Keypad Lock.
Receiving Private Calls
When you receive an incoming Private call, Talkgroup call, or call alert (see
“Private Call” on page 89), Keypad Lock is temporarily disabled.
1
2
Press and hold the Push-To-Talk (PTT) button on the side of the phone.
Begin talking after the phone emits a chirping sound. Release the PTT
button to listen.
When you end the call, the Recent Calls list appears. Press s or press
C under EXIT to reactivate Keypad Lock and return to the Ready
screen.
Receiving New Voice Mail
When you receive new Voice Mail (see “Voice Mail” on page 82), Keypad
Lock is temporarily disabled.
1
When New Voice Mail Message displays, press C under EXIT to
return to the Ready screen and reactivate Keypad Lock.
Or,
Press C under CALL to access Voice Mail.
2
Once you have finished, press s to exit Voice Mail. The Recent Calls
list displays. Press s to reactivate Keypad Lock and return to the
Ready screen.
29
Receiving New Text Messages
When you receive new Text Messages (see “Text and Numeric Messaging” on
page 84), Keypad Lock is temporarily disabled.
1
When New Text Message displays, press C under EXIT to return to
the Ready screen and reactivate Keypad Lock.
Or,
Press C under READ to read the message. Press C under SAVE or
DELETE. Once you have finished, press s or press C under EXIT to
reactivate Keypad Lock return to the Ready screen.
Receiving New Net Alerts
When you receive a new Net Alert, Keypad Lock is temporarily disabled.
1
When New Browser Message displays, press C under EXIT to return
to the Ready screen and reactivate Keypad Lock.
Or,
Press C under GOTO. Press C under View. Press C under OK or
Reply. Once you have finished, press s until you reactivate Keypad
Lock return to the Ready screen.
www.motorola.com/iden
30
Status of Your i30sx Phone
Deactivating Keypad Lock
From the Ready screen, press q
*. The message Keypad Unlocked
displays briefly.
E
Status of Your i30sx Phone
Your i30sx phone has a status light that displays at the top of the phone. The
status light indicates the status of your connection.
Status Light
Indicator
i30sx Phone Status
Flashing Red
Signing on to the network. Please wait.
No service or out of coverage area.
In service/Ready to use.
Solid Red
Flashing
Green
Solid Green
In use.
31
My Information
You can select My Info from the main menu to display or edit the following:
•
•
Name — enter your name in this field.
Private ID — your Private ID is displayed in this field. Your Private ID is
the number that others use to contact you using Private calls.
•
Phone Numbers of Lines 1 and 2 — your phone’s numbers are displayed in
these fields. You can edit the phone numbers displayed on the My
Information screen, but this does not change your phone numbers.
•
•
Carrier IP — This field displays your phone’s carrier assigned IP address.
IP Addresses — these fields display the IP addresses you use to access the
Internet with your phone.
•
Circuit Data Number (Ckt) — your circuit data number is in this field.
Viewing/Editing My Information
1
2
From the Ready screen, press q.
Press S to scroll to My Info. Press C under SELECT. The My
Information screen displays.
3
4
Use S to scroll through the fields.
To edit the displayed information, press C under CHANGE. Edit
information as desired, and press C under OK to save the changes.
To return to the Ready screen, press C under EXIT.
www.motorola.com/iden
32
Using T9® Text Input
®
Using T9 Text Input
®
Your i30sx phone has embedded software, called T9 Text Input, that makes
typing on a phone keypad much like typing on a computer keyboard: it
eliminates the traditional “multi-tap” method of text entry. As you type, you
press only one key per letter. T9 Text Input matches your keystrokes to words in
its linguistic database of approximately 60,000 words and proper names. You
may also store additional words you frequently use in your own user database,
which is incorporated into the T9 database.
T9 Text Input is available when you are typing information into your
Phonebook.
T9 Text Input Entry Modes
Four text entry modes are available in T9 Text Input: Alpha, Word, Symbols,
and Numeric. When you are using T9 Text Input, an icon in the top right corner
of your phone’s display screen (next to the battery strength indicator icon)
indicates the T9 Text Input entry mode you are using:
Icon
T9 Entry Mode
Name
Used For...
w
#
Alpha
Word
Standard “multi-tap” keypad
text entry.
Entering words and
punctuation with one key-
press per character.
!
,
Symbols
Numeric
Entering punctuation and
symbols such as “@” or “?”.
Entering keypad numbers.
When you are using Phonebook, you select your text entry mode from a menu
available whenever the phone is displaying a screen that requires you to enter
text (for example, the Name screen or Title screen).
33
Choosing a Text Entry Mode
1
From any screen that requires text input, press q to access the
Entry Method menu.
A check mark appears next to the current text entry mode. When you
access a screen that requires text input, the default text entry mode is
Alpha.
2
3
Press S to scroll to the T9 Text Input text entry mode you want to use.
Press C under SELECT.
The phone returns to the text entry screen. The text entry mode you
selected is now active.
Choosing a Language
To change the language of the T9 Text Input database:
1
From any screen that requires text input, press q to access the
Entry Method menu.
2
3
4
5
Press S to scroll to Languages.
Press C under SELECT.
Press S to scroll to the language you want T9 Text Input to use.
Press C under SELECT.
Using Alpha Mode
To enter text while in Alpha text entry mode to enter letters, numbers, and
symbols:
•
Press any button on the alphanumeric keypad to enter the letters, numbers,
and symbols on that key.
•
Type a letter then press Q to activate Caps Lock or type a letter then press
R to deactivate Caps Lock.
www.motorola.com/iden
34
Using T9® Text Input
•
Pause briefly to leave the currently displayed character in place and move
on to the next place in the text entry field.
•
•
Press P to create a space in the text entry field.
Press C under DELETE to delete one character. Press and hold C under
DELETE to delete an entire entry.
Using Word Mode
In Word mode, T9 Text Input analyzes the letters on the keypad button you
press and arranges them to create words. As you type, T9 Text Input matches
your keystrokes to words in its database and will display the most commonly
used matching word.
Special Key Functions
Some of your phone’s keys assume different functions while in T9 Text Input
Word mode.
Backspace and Erase
Press C under DELETE once to backspace or to erase a single character. Press
and hold C under DELETE to erase the entire text entry field.
Space
Press R once to accept a word and insert a space when entering text.
Next Word in Database
Press 0 to display more words in the database that match the keystroke
sequence you entered.
Shift and Caps Lock
Press # to make the next letter typed uppercase (Shift), to make all subsequent
letters types uppercase (Caps Lock), or to go back to lowercase letters.
These icons appear in the top row of your display screen:
•
•
$ for Shift to uppercase
x for Caps Lock
When neither of these icons appear, letters typed are lowercase.
NOTE: T9 Text Input automatically makes the first letter of a sentence
uppercase.
35
Punctuation
In Word mode, T9 Text Input uses Smart Punctuation to quickly apply basic
rules of grammar to insert the correct punctuation within a word and at the end
of a sentence.
Press 1 to insert punctuation. One of eight basic punctuation symbols will be
inserted (. , - ’ @ : ? ;).
Press 0 to change the inserted punctuation symbol to another of the eight basic
punctuation symbols.
Press R to accept the punctuation and continue typing.
NOTE: Additional punctuation symbols are available in Symbols mode.
Entering a Word
To enter a word using Word mode:
1
2
Choose Word as your text entry mode.
Type a word by using one key-press per desired letter.
For example, to type “test” press
8
3
7
8.
NOTE: The displayed word may change as you type it. Do not try to
correct the word as you go. Type to the end of the word
before editing.
3
If the word that appears is not the desired word, press 0 to change the
word on the display to the next most likely word in the database.
Repeat until the desired word appears.
If the desired word does not appear, you can add it to the database of
words using the instructions in “Adding Words to the User Database”
on page 36.
Adding Words to the User Database
To add words to the T9 database:
1
2
Change from Word text entry mode to Alpha text entry mode.
Type the word using Alpha text entry mode.
www.motorola.com/iden
36
Using T9® Text Input
3
4
Return to Word text entry mode.
Press R to add a space.
The word you typed in Alpha text entry mode is now in the database.
NOTE: You cannot store alphanumeric combinations, such as Y2K.
Using Numeric Mode
To use Numeric text entry mode, choose Numeric as your text entry mode and
press the number buttons on your keypad to enter numbers.
Using Symbols Mode
To use Symbols text entry mode:
1
Choose Symbols as your text entry mode.
A row of 32 symbols appears along the bottom of your phone’s display
screen, just above the display option and menu icon. (Press T to view
the complete row.)
2
3
Press T to highlight the symbol you want to enter into the text entry
field.
Press C under SELECT to enter the symbol.
37
www.motorola.com/iden
38
Display Essentials
your phone.
This section includes:
Display Screen Elements
Status Icons
Page 39
Page 40
Page 42
Page 42
Page 43
Page 43
Page 43
Page 44
Text Display Area
Call Information Icons
Menu Icon
Display Options
Navigating Menus and Lists
Main Menu Options
Display Screen Elements
Any time your phone is powered on, the display screen provides you with
information and options.
The Ready Screen
Status
icon
rows
The Ready screen displays any time the
phone is powered on, but not engaged in
some activity.
Tex t
display
area
The Ready screen consist of elements
common to many of the screens your
phone displays:
Menu
icon
Display
options
•
•
•
status icons
A
text display area
menu icon
39
•
display options
USER TIP:You can always access the Ready screen by pressing e.
NOTE: There are instances where
truncation of words occur in some
of the menu items on the i30sx
phone that do not allow you to fully
view the current menu selection.
You can select P in order to see the
next letter on the screen if possible
or press C under CHANGE to see
the field in more detail.
m
Status Icons
Status icons provide you with information about your phone and its functions.
These icons are context sensitive; meaning, the icons that appear depend on the
task you are performing.
Status icons appear in the two rows at the top of the display screen. Some appear
at all times. Others appear only when your phone is engaged in certain activities
or when you have activated certain features.
Icon
Indicates...
Battery Strength icons — remaining
battery charge. More bars on the battery
indicate a greater charge. See the table on
page 14 for detailed information about the
meaning of each battery strength icon.
abcd
efgd
Signal Strength icons — strength of the
network signal. More bars next to the
antenna indicate a stronger signal.
opqr
s
Active Line icons — currently active
phone line; 0 indicates Line 1 is active; 1
indicates Line 2 is active.
01
GHI
JKL
Call Forward icons — phone is set to
forward calls. See “Call Forwarding” on
page 76 for more information.
www.motorola.com/iden
40
Display Screen Elements
c
h
%
Y
Z
]
{
l
Phone In Use — phone is connected on an
active call.
Private In Use — number being called is a
Private ID.
Talkgroup In Use — phone is active on a
talkgroup call.
Packet Data Ready — phone is ready to
receive data through a data cable.
Packet Data Activity — phone is
transmitting data.
Mobile IP — phone is ready to access the
Internet.
Secure Data — phone is accessing the
Internet using a secure connection.
Roaming — phone is searching for
network connections outside your local
area.
.
y
B
Text Messages or Net Alert messages.
Voice Mail — you have one or more Voice
Mail messages.
FaxMail — you have one or more FaxMail
messages.
Speaker Off — phone’s speaker is off.
u
-[\*
Ring/Volume icons — you have
customized the way in which the phone is
set to notify you when you receive calls
and other types of messages. See “Ring
Style and Notification Type” on page 103
for more information.
41
w#,!
$x
T9 Text Input icons — you are using T9
Text Input to enter text. See “Using T9®
Text Input” on page 33 for more
information.
`
TTY icons — your phone supports TTY
devices and communications
The icon of the main menu feature currently in use always appears in the top left
of the status icon rows. For a list of the main menu icons, see “Main Menu
Options” on page 44.
Text Display Area
The text display area shows menu options, messages, names, phone numbers,
and other information.
Call Information Icons
Each of the following icons appear on the left side of the text display area of the
one-line screen or the full-sized screen, providing you with information about
your phones line or lines.
Icon
D
Indicates...
In Call - phone is in an active call.
E
Incoming Call - phone is receiving an
incoming all (not active).
X
Outgoing Call - phone is placing an
outgoing (not active).
z
On Hold - phone has a call on hold.
?
End Call - phone has ended the active call.
www.motorola.com/iden
42
Navigating Menus and Lists
Menu Icon
This menu icon S appears on any screen from which a menu can be accessed.
To access a menu, press the q on your keypad. This key has the menu
icon printed on it.
Menus are context sensitive. The menu that appears depends on the screen you
access it from and the items on the menu apply to the task you are currently
performing.
Pressing q or Q from the Ready screen accesses the main menu.
Display Options
Two display options appear at the bottom of most screens. These options enable
you to perform a wide variety of actions, including changing, saving and
viewing information, running programs, and canceling previous actions. You
activate a display option by pressing the C below it.
NOTE: Throughout the User’s Guide, the option keys A and B will
be represented by C.
The Ready screen display options provide quick access to two main menu
features. By default, the Phonebook (PHBK) and Messages (MESG) display
options appear on the Ready screen.
The display options on screens other than the Ready screen cannot be
customized.
Navigating Menus and Lists
The i30sx phone is menu driven. By navigating menus, you access submenus
which lead to all of the functions and features that are built into your phone. Use
the menus to store calls, manage your Phonebook, change your phone settings,
browse the Internet, and more.
Some features include lists of names, numbers, or other information. These list
items can be accessed the same way menu options are.
To access the items in a menu or list, scroll through using the four-way
navigation key near the center of your keypad. Scroll down by pressing the
lower portion of the navigation key R. Scroll up by pressing the upper portion
of the navigation key Q. Holding down the appropriate part of the navigation
key speeds up scrolling. If you continue scrolling after you have reached the
bottom or top of a menu or list, you “wrap-around” to the opposite end.
43
If more items appear in a menu or list than can be displayed in the text area, a
down arrow or up arrow appears in the left side of the screen indicating that
more options may be accessed by scrolling up or down.
Down arrow
Up arrow
S
B
To access the main menu, press q or Q from the Ready screen:
Main Menu Options
By default, the main menu options appear in the order determined by your
service provider.
Menu Item
Use to ...
7 Net
Browse the Web.
m Settings
Customize your phone: Ring/Vibe, In Call
Setup, Security, Initial Setup, Phone Setup,
Voice Volume, and Talkgroup Settings.
b Phonebook
Store and retrieve a list of stored entries for
calling, editing, viewing, and deleting.
R Messages
Receive, store, access and manage Voice
Mail, FaxMail, Text Messages, and Net
Alert.
; Call Forward
Settings for forwarding calls in various
situations.
O Memo
Input and store numbers to access later.
www.motorola.com/iden
44
Main Menu Options
z Call Timers
j Recent Calls
U My Info
Display the duration of phone calls, private
or group calls, circuit data use, and
Kilobytes sent and received.
Access a list of the last 20 sent, received, or
missed calls. Calls can be made from this
list.
View the name, Private ID, phone numbers
for lines 1 and 2, IP address, and circuit
data number of your phone.
: Call Alert
Store received call alerts to respond to at
your convenience.
To choose the highlighted Main Menu selection, press C under SELECT. To
exit the Main Menu and return to the Ready screen, press C under EXIT or
press s.
45
www.motorola.com/iden
46
The Phonebook allows you to store up to 250 frequently used names and
numbers.
When you store information in your Phonebook, it is saved on your SIM card. If
access information in your Phonebook from that phone.
NOTE: If you use a different SIM card in your phone, some information
stored in the phone will be lost. See “Inserting/Removing the
SIM Card” on page 25.
This section includes:
Accessing Phonebook with an i2000, i2000plus, or
GSM Phone
Page 48
Phonebook Entries and Speed Dial Numbers
Phonebook Icons
Page 48
Page 48
Page 49
Page 50
Page 50
Page 51
Page 52
Page 58
Page 56
Page 59
Page 59
Page 60
Accessing Your Phonebook
About Phonebook Entries
Viewing Phonebook Entries
Sorting Phonebook Entries
Adding Phonebook Entries
Editing Phonebook Entries
Storing Numbers and Private IDs Quickly
Deleting Phonebook Entries
Pause Digit Entry
Plus Dialing
47
Accessing Phonebook with an i2000, i2000plus,
or GSM Phone
If you plan to use the information stored in your Phonebook with an i2000,
i2000plus, or any other GSM phone, you must purchase CompanionPro. Go to
www.motorola.com\iden or your service provider’s web site for more
information.
You can use CompanionPro to make the Phonebook information saved to your
i30sx phone’s SIM card accessible in this type of phone.
Phonebook Entries and Speed Dial Numbers
Your Phonebook can store multiple phone numbers to a single name. For
example, you can enter someone’s name into your Phonebook once and then
add that person’s home, office, mobile phone and fax numbers to the name.
Each number stored in your Phonebook is automatically assigned a Speed Dial
number that corresponds to its location in your Phonebook. Each phone number
uses one Speed Dial location, even if it is assigned to the same name as other
phone numbers. The phone number stored in location 1 is assigned Speed Dial
number 1, the phone number stored in location 2 is assigned Speed Dial number
2, and so forth, to location 250.
Phonebook Icons
Icons that appear to the right of entries in your Phonebook convey information
about those entries.
When you enter a phone number in your Phonebook, you can designate the
phone number’s type using any of the following icons:
W
h
+
Q
L
b
Mobile
Private
Work
Main
Home
Pager
www.motorola.com/iden
48
Accessing Your Phonebook
K
n
Fax
Talkgroup
IP (Internet
Protocol
Address)
|
Z
Other
NOTE: The Mobile icon automatically appears to the right of the first
number assigned to a name unless you choose another icon.
For more information on entering numbers into your Phonebook, see “Adding
Phonebook Entries” on page 52.
The “picker” arrows appearing around the number type icon indicates multiple
phone numbers stored under one name:
ef
pickers
Accessing Your Phonebook
If PHBK is one of your display options:
From the Ready screen, press C under PHBK.
If PHBK is not one of your display options:
1
2
3
From the Ready screen, press q.
Press R to scroll to Phonebook.
Press C under SELECT.
USER TIP:You can also access the Phonebook by pressing q
while your phone is on a phone call or private call.
49
This brings you to the Phonebook screen. From this screen, you can view, sort,
add, edit, and delete Phonebook entries, check Phonebook capacity, or make
calls.
About Phonebook Entries
Each Phonebook entry may contain the following information:
•
The name associated with the entry. Typically, this is the name of the
person whose number you are storing in the Phonebook.
•
The type of number to be stored: Mobile, Private, Work, Main, Home,
Pager, Fax, Other, or Talkgroup. If you don’t choose a type, the number is
assigned type Mobile, unless a Mobile number has already been assigned
to the name.
•
•
The number to be stored. Every Phonebook entry must contain a phone
number. This number may be any type of phone number, Private ID, or
Talkgroup number.
A Speed Dial number. You may accept the default Speed Dial number or
assign a different one.
Viewing Phonebook Entries
Names with more than one number assigned to them appear with ef
surrounding the icon to the right of the name. For example, if you had stored a
home and work number for Joe Smith, the entry for Joe Smith’s home phone
number would look like this:
Joe Smith
eLf
When the name is highlighted, press T to scroll to the icons representing each
of the numbers assigned to that name.
To view any of the phone numbers assigned to a name:
1
2
From the Phonebook screen, press S to scroll to the name associated
with the phone number you want to see.
Press T to view the icons representing the phone numbers assigned to
that name.
www.motorola.com/iden
50
About Phonebook Entries
3
4
When the icon representing the number you want to view is displayed,
press C under VIEW.
If there is a Private ID or a Talkgroup number stored for the person,
press q. Then press R to scroll to View and press C under
SELECT.
Press S to view the other numbers stored for this name.
Sorting Phonebook Entries
You can sort your Phonebook entries by:
•
•
Name — the name you entered for the entry.
Speed No. — the Speed Dial location of the entry.
NOTE: Private and group calls cannot be made from the Phonebook
when sorted by Speed Dial location.
To sort your Phonebook list:
1
From the Phonebook screen, press
q to view the Phonebook Menu
screen.
}
Press R to scroll to the desired sorting method: Name or Speed #.
2
3
4
5
Press R to scroll to Sort By.
Press C under SELECT.
Press C under SELECT.
51
Checking Phonebook Capacity
Your Phonebook can store up to 250 separate numbers. To see how many
entries are stored in your Phonebook:
1
From the Phonebook screen, press q to view the Phonebook
Menu screen.
2
3
Press R to scroll to Capacity.
Press C under SELECT.
The Capacity screen shows how many storage spaces in you
Phonebook are in use and how many are empty.
Adding Phonebook Entries
Using the following instructions, you will enter the information in the order the
items appear on the Phonebook Entry Details screen. However, you can enter
this information in any order by pressing S to scroll through the items on the
Entry Details screen.
You can leave any item blank or unchanged by pressing S to scroll past it on
the Entry Details screen. Only a number is required for a valid Phonebook
entry.
After you have entered a phone number and any other information you wish to
include, you can press C under DONE to save the Phonebook entry.
To cancel a Phonebook entry at any time, press s to return to the Ready screen.
www.motorola.com/iden
52
About Phonebook Entries
I
To add a Phonebook entry:
1
To access the Entry Details screen:
From the Phonebook screen, with [New
Entry] highlighted, press C under
SELECT.
Or,
From the Phonebook screen, press
q. Then press R to scroll to
New and press C under SELECT.
2
If you want to assign a name to your
Phonebook entry:
With the Name field highlighted, press C
under CHANGE.
From the Name screen, enter the name
using the alphanumeric keypad.
See “Using T9® Text Input” on page 33 for
information about entering text into this field.
When you are finished, press C under OK.
The Entry Details screen returns with the Type field highlighted.
3
With the Type field highlighted, press C
under CHANGE.
From the Type Editor screen, press R to
scroll to the type of number you want to
assign to the Phonebook entry.
Press C under SELECT.
J
The Entry Details screen returns with the
# field highlighted.
53
4
Assign a number to your Phonebook entry:
With the # field highlighted, press C under CHANGE.
Type the number using the alphanumeric keypad. For phone numbers,
use the 10-digit format. For Private IDs, use
Area ID * Network ID * Member ID (the asterisks must be included as
part of the Private ID).
To delete a digit, press C under DELETE.
See “Pause Digit Entry” on page 59 and
“Plus Dialing” on page 60 for information
on using these features when storing
phone numbers in your Phonebook.
NOTE:The number can be up to 20
characters long.
When you are finished, press C under
K
OK.
The Entry Details screen returns with the Speed # field highlighted.
www.motorola.com/iden
54
About Phonebook Entries
5
The default Speed Dial number assigned to the phone number is
displayed in the Speed # field. This is always the next available Speed
Dial location.
NOTE:Private IDs and Talkgroup
numbers do not have associated
Speed Dial numbers.
If you want to assign the phone number to
a different Speed Dial location:
With the Speed # field highlighted, press
C under CHANGE.
L
Press C under DELETE to delete the
current Speed Dial number.
Type the new Speed Dial number using the alphanumeric keypad.
When you are finished, press C under OK.
NOTE:If you change the Speed Dial number to one already in use,
you will be prompted to overwrite the entry that is currently
in that location. Pressing C under YES will delete the
existing entry from your Phonebook.
6
If you want to store more numbers to the
name associated with this Phonebook entry:
Press R to scroll to TYPE and then press
C under CHANGE.
A new Type field appears for the additional
number.
l
Enter the information for the additional
numbers using step 3 through step 7.
NOTE:Each name in your Phonebook may have up to seven
numbers,associated with it.
55
7
When you have entered all the
information you wanted in this
Phonebook entry, press C under DONE.
N
From the Ready screen, use the alphanumeric keypad to enter the
Storing Numbers and Private IDs Quickly
Your phone gives you two ways to store numbers quickly: from the Ready
screen and from the Recent Calls list.
To store a number from the Ready screen:
1
number you want to store.
2
3
Press q to access the Dialing Menu screen.
With Store Number highlighted, press C under SELECT.
This displays the Store To screen with the [New Entry] field
highlighted.
4
To store to a new entry, press C under SELECT. The Entry Details
screen will display with the number entered in the field.
Or,
To store to an existing entry, press R to scroll the list of names in
your Phonebook. Or press the first letter of the entry to jump to the
entry. Once the desired entry is highlighted, press C under SELECT.
The Phonebook information for that entry displays with the number
entered in the # field and the Type field highlighted.
5
Press C under CHANGE. Press R to scroll to the type of number you
want to assign to the Phonebook entry. Press C under SELECT.
www.motorola.com/iden
56
About Phonebook Entries
6
7
If you want to add more information to the Phonebook entry, follow the
applicable instructions in “Adding Phonebook Entries” on page 52.
Press C under DONE.
To store a number from the Recent Calls list:
1
2
3
From the Recent Calls screen, press R to scroll to the 10-digit
telephone number you want to store.
Press C under STORE. This displays the Store To screen with [New
Entry] highlighted.
To store a new entry, press C under SELECT. The Entry Details
screen displays with the number entered in the # field and the Name
field highlighted. Enter the name using the alphanumeric keypad. Press
C under OK.
Or,
To store to an existing entry, press R to scroll the list of names in
your Phonebook. Or press the first letter of the entry to jump to the
entry. Once the desired entry is highlighted, press C under SELECT.
The Phonebook information for that entry displays with the number
entered in the # field and the Type field highlighted.
4
With Type highlighted, press C under CHANGE. Press R to scroll to
the type of number you want to assign to the Phonebook entry. Press C
under SELECT.
5
6
If you want to add more information to the Phonebook entry, follow the
applicable instructions in “Adding Phonebook Entries” on page 52.
Press C under DONE.
57
To store a Private ID from the Recent Calls list:
1
Press R to scroll to the Private ID number you want to store.
NOTE: The Store option for Private ID numbers (e.g., 123*123*1234),
will not display in the Recent Calls list.
2
3
With the Private ID highlighted, press q to access the Rec. Calls
Menu. Press R to scroll to Store. Press C under SELECT. This
displays the Store To screen with [New Entry] highlighted.
To store to a new entry, press C under SELECT. The Entry Details
screen displays with the Private ID icon entered in the Type field, the
Private ID number entered in the # field, and the Name field
highlighted. With the Name field highlighted, press C under
CHANGE. Enter the name using the alphanumeric keypad. Press C
under OK.
Or
To store to an existing entry, press R to scroll the list of names in
your Phonebook. Once the desired entry is highlighted, press C under
SELECT. The Entry Details screen displays with the Private ID icon
entered in the Type field, the Private ID number entered in the # field,
and the Name field highlighted.
4
Press C under DONE.
Editing Phonebook Entries
1
From the Phonebook screen, press C to scroll to the entry you want to
edit.
2
3
4
5
Press q to view the Phonebook Menu.
Press R to scroll to Edit.
Press C under SELECT. The Entry Details screen displays.
Follow the applicable instructions in “Adding Phonebook Entries” on
page 52 to edit the various fields.
www.motorola.com/iden
58
Pause Digit Entry
Deleting Phonebook Entries
1
From the Phonebook screen, press R to scroll to the entry you want to
delete.
2
3
Press q to view the Phonebook Menu.
Press R to scroll to Delete Contact or Delete Number.
Delete Contact deletes the name and all numbers associated with that
name.
Delete Number deletes the number associated with the icon that is
currently displayed in the Phonebook list for the name. The name and
all the other numbers will remain.
4
Press C under SELECT. A warning screen displays requiring you to
confirm the deletion.
Pause Digit Entry
When storing a number, you can program your phone so that it will not only dial
a number but also pause before entering another series of numbers such as a
personal identification number (PIN) or password. This feature is particularly
useful for accessing automated services such as voice mail and banking systems
from your i30sx phone.
Here’s how it works. Let’s say you have a company voice mail account that you
frequently check while traveling. And, to access that account you must do the
following:
•
•
•
Dial your work number
Press # while the voice mail greeting is being played
Enter your PIN to access your messages
You can program your phone to enter all of the above information for you. All
you have to do is separate each entry with a pause. If you were to program your
phone to automatically input the above information, the stored data would look
like this 17035551234P#P1234. In this example, the first eleven digits represent
the number that must be dialed to access your voice mail. The P represents a 3
second pause. The # interrupts your greeting. The second P represents another 3
second pause. The last four digits represent your PIN.
59
You can use this feature not only to enter PINs and passwords but also to have
the phone automatically select menu options (i.e., press 1 to hear messages).
To create a three-second pause, follow the steps below:
Press and hold * for two seconds. The pause symbol (P) will appear on
the display screen.
NOTE: You can enter up to 20 characters in a single entry, stored or
dialed.
NOTE: If you use a system that will not let you enter an option until the
automated message has played in its entirety, you can program
your phone to pause for more than 3 seconds. For example,
performing the above step twice will program two pauses and
cause your phone to wait 6 seconds before entering the next set
of numbers.
Plus Dialing
without entering the local international access code. Use Plus Dialing for all
Phonebook entries if you plan to travel outside the United States. Begin by
following the instructions for “Adding Phonebook Entries” on page 52. Before
you type the phone number to be stored:
1
Press and hold 0 for two seconds. A “0” appears, then changes to a
“+”.
NOTE: The network translates the “+” into the appropriate
international access code needed to place the call.
2
3
Enter the country code, city code, or area code, and phone number.
Follow the rest of the instructions for “Adding Phonebook Entries” on
page 52.
www.motorola.com/iden
60
Digital Cellular
phone calls, make emergency calls, and be notified of a missed call.
This section includes:
Making Phone Calls
Emergency Calling
Receiving a Phone Call
Ending a Phone Call
Recent Calls
Page 61
Page 66
Page 66
Page 67
Page 67
Page 70
Page 72
Page 72
Page 74
Page 75
Page 76
Hands-Free Speakerphone
Call Waiting
Call Timers
Call Hold
Three-Way Calling
Call Forwarding
Making Phone Calls
Your i30sx phone provides the following features for making phone calls:
•
•
•
•
•
•
•
Direct Dial
Phonebook
Recent Calls
Speed Dial
Turbo Dial®
Last Number Redial
TTY - your phone supports TTY devices and communications.
61
Using Direct Dial
1
From the Ready screen, use the keypad to enter the 10-digit phone
number you want to call.
Press s to place the call.
Press r to end the call.
2
3
NOTE: See “Plus Dialing” on page 60 for information on making
international calls.
If you make a mistake:
•
•
•
•
To clear one digit, press C under DELETE.
To clear all digits, press and hold C under DELETE.
To insert a digit, press T to move the cursor.
To cancel, press r.
Making Calls from the Phonebook
After you have entered phone numbers into your Phonebook, you can use these
numbers to make phone calls. For information on entering numbers into your
Phonebook, see “Adding Phonebook Entries” on page 52.
www.motorola.com/iden
62
Making Phone Calls
To make calls from the Phonebook:
1
From the Ready screen, if PHBK is one of your display options, press
C under PHBK.
Or,
From the Ready screen, press q, then press R to scroll to
Phonebook. Press C under SELECT.
2
Press R to scroll through the names in your Phonebook.
Or,
Use the alphanumeric keypad to enter the first letter of the name and
press R to scroll through the names beginning with that letter.
Stop when the name of the person you want to call is highlighted.
3
If more than one number is stored for the person you want to call, ef
appears around the icon to the right of the person’s name.
that person.
Or,
Press C under VIEW to view all the numbers stored for this person.
Then press R to scroll to the number you want to call.
Or,
If there is a Private ID or a Talkgroup number stored for this person,
press q. When the Phonebook Menu appears, press S to scroll
to View and press C under SELECT. Then press R to scroll to the
number you want to call.
For more information on assigning multiple numbers to one person, see
“Adding Phonebook Entries” on page 52.
4
5
Press s to place the call.
Press r to end the call.
63
Making Calls from the Recent Calls List
Your phone stores the numbers of the last 20 calls you received or sent in the
Recent Calls list.
1
From the Ready screen, press R.
Or,
From the Ready screen, press S to Recent Calls if Recent Calls is not
the first item on the list, press S to scroll to it. Press C under
SELECT.
2
3
Press S to scroll the list received or sent recent calls until you reach the
desired call.
To view additional information about the call:
Press C under VIEW.
Or,
Press q to access the Rec. Calls Menu. Then press R to scroll to
View and press C under SELECT.
4
5
Press s to place the call.
Press r to end the call.
Using Speed Dial
Each phone number stored in your Phonebook is assigned a Speed Dial number.
You can use the Speed Dial number to quickly place a call.
1
From the Ready screen, enter the Speed Dial number assigned to the
phone number you want to call.
2
3
4
Press #.
Press s to place the call.
Press r to end the call.
www.motorola.com/iden
64
Making Phone Calls
Using Turbo Dial
Turbo Dial allows you to call the numbers in your Phonebook associated with
Speed Dial numbers 1 through 9 by pressing and holding the corresponding
numeric key on the keypad.
Press and hold a number key (1 through 9).
while Keypad Lock or SIM Lock is active.
Last Number Redial
Press and hold s to redial the last number you called.
Placing International Phone Calls
When making an international call, you can either enter the international access
code directly (011 in the United States) or use Plus Dialing.
You can make international calls from your Phonebook if you have stored the
numbers with Plus Dialing. See “Adding Phonebook Entries” on page 52 and
“Plus Dialing” on page 60 for more information.
NOTE: Your service default is “International Calls Restricted.”
Therefore, you must call Customer Care to obtain international
dialing access.
To make an international call using Plus Dialing:
1
Press and hold 0 for two seconds. A “0” appears, then changes to a
“+”.
NOTE: The network translates the “+” into the appropriate
international access code needed to place the call.
2
3
4
Enter the country code, city code, or area code, and phone number.
Press s to place the call.
Press r to end the call.
65
Making TTY Calls
NOTE: This feature may not be offered by
your service provider.
You can use your phone to make calls using a
TTY device.
When you make TTY call, the call begins in the
TTY mode you last selected. You can change the
TTY mode during a call. For more information on
choosing a TTY mode, see “Setting TTY Mode `”
on page 111.
Q
To make a call using a TTY device:
1
2
Connect one end of a 2.5mm cable into the jack on the phone. (To locate
the jack, see page 12.) Connect the other end of the cord into your TTY
device.
Enter the phone number you wish to call and press s.
Emergency Calling
Your phone supports emergency calling. Emergency calls can be made even
when the SIM card is blocked or not in the phone.
To place a call in an emergency, dial 911s. You will be connected to the
nearest emergency dispatch center. If you are on an active call, you must end it
before calling 911.
NOTE: If you have enabled the Keypad Lock feature, you must unlock
the phone’s keypad before any call can be made, including 911
emergency calls.
Receiving a Phone Call
Incoming calls are indicated by a ring, vibration or backlight
illumination. Press s or any key on the keypad or press C under YES
to answer the call.
www.motorola.com/iden
66
Ending a Phone Call
Ending a Phone Call
Press r to hang up.
Recent Calls
The Recent Calls feature stores the numbers of the 20 most recent calls you have
made and received, including private and talkgroup calls. You can access
Recent Calls to:
•
•
•
•
view your recent calls
store numbers to the Phonebook
delete recent calls
call numbers on the Recent Calls list
NOTE: The Recent Calls list displays briefly after you end a call.
Recent Calls Icons
If the number of the recent call is stored in your Phonebook, the name associated
with the phone number appears on the Recent Calls list.
For private calls, group calls, and numbers stored in your Phonebook, an icon
appears to the right of the name of number indicating the Phonebook type of the
number used in the call. See “Phonebook Icons” on page 48 for more
information about Phonebook types.
For phone calls, an icon appears to the left of the name or number indicating the
type of call:
•
•
•
N indicates an incoming call
a indicates an outgoing call
V indicates a missed call. (Missed calls appear on your Recent Calls list
only if you have Caller ID.)
For private calls, an icon appears to the left of the name or number indicating the
type of call:
•
•
h indicates a Private Call
n indicates a Group Call
67
Viewing Recent Calls
To view your Recent Calls list:
1
From the Ready screen, press R.
Or,
From the Ready screen, press S to scroll to Recent Calls. Press C
under SELECT.
2
Press S to scroll the list of recent calls.
Getting Detailed Information About Recent Calls
To get more information about a recent call:
1
2
From the Recent Calls screen, press S to scroll to the call you want
more information on.
Press C under VIEW.
Or,
Press q to access the Rec. Calls Menu. Then press R to scroll to
View and press C under SELECT.
The Call Details screen that appears displays information such as the name
associated with the number of the recent call, the number, the date, time, and
duration of the call.
www.motorola.com/iden
68
Recent Calls
Storing a Recent Call Number to the Phonebook
To store a number from the Recent Calls list to the Phonebook:
1
2
From the Recent Calls screen, press S to scroll to the number you
want to store.
Press C under STORE.
This displays the Phonebook Entry Details screen with the # field filled
in with the number of the recent call.
3
If you want to add more information to the Phonebook entry, follow
applicable the instructions in “Adding Phonebook Entries” on page 52.
Calling From the Recent Calls List
See “Making Calls from the Recent Calls List” on page 64.
Deleting Recent Calls
To delete a recent call:
1
From the Recent Calls screen, press S to scroll to the call you want to
delete.
2
3
4
5
Press q to access the Rec. Calls Menu.
Press R to scroll to Delete.
Press C under SELECT.
Press C under YES to confirm the deletion.
To delete all calls on the Recent Calls list:
1
2
From the Recent Calls screen, press q to access the Rec. Calls
Menu.
Press R to scroll to Delete All.
69
3
4
Press C under SELECT.
Press C under YES to confirm the deletion.
Hands-Free Speakerphone
This feature provides the convenience of a hands-free solution, allowing you to
hold impromptu meetings and place safer phone calls. The speakerphone option
(SPKR) is available whenever you are on an active phone.
NOTE: During speakerphone operation, you may either speak or listen,
but you cannot do both at the same time.
To turn the speakerphone on:
While on an active call, press C under SPKR.
While speakerphone is on, Spkrphone On appears in the text display area.
To turn the speakerphone off:
Press C under SPKR.
Mute
Use the Mute feature to listen to incoming audio without allowing sound from
your phone’s microphone to be transmitted over the phone line.
To turn mute on:
Press C under MUTE.
While mute is on, UNMUT appears as a display option.
To turn mute off:
Press C under UNMUT.
www.motorola.com/iden
70
Call Timers
Call Timers
Call Timers measure the duration of your phone calls, Private or Group calls,
and circuit data use, as well as the number of Kilobytes sent and received by
your phone.
The Call Timers menu displays the following options:
•
•
Last Call — displays the duration of your most recent phone call.
Phone Reset — keeps a running total of your phone call minutes, until you
reset it.
•
•
Phone Lifetime — displays the total minutes of all your phone calls.
Prvt/Grp Reset — keeps a running total of all of your Private and Group
call minutes, until you reset it.
•
•
•
•
Prvt/Grp Life — displays the total minutes of all your Private and Groups
calls.
Circuit Reset — keeps a running total of all of your circuit data use, until
you reset it.
Circuit Lifetime — displays the total minutes of all of your circuit data
use.
Kbytes Reset — keeps a running total of the number of Kilobytes sent and
received by your phone, until you reset it.
To view the Call Timers menu:
1
2
3
From the Ready screen, press q.
Press R to scroll to Call Timers.
Press C under SELECT.
To view or reset a Call Timers option:
1
From the Call Timers menu, press S to scroll to the Call Timers
option you want to view or reset.
71
2
3
Press C under SELECT.
If the feature does not include an option to reset or you do not wish to
reset the option, press C under DONE when you are finished viewing.
To reset a feature, press C under RESET. When the confirmation
screen appears, press C under YES to confirm the reset.
NOTE: The values displayed by Call Timers are not intended for billing
purposes. Call Timers are estimates only.
Call Waiting
Call Waiting allows you to receive a second call while you are talking on the
phone. You can switch between calls so you never have to miss a call. By
default, Call Waiting is always on unless you turn it off for a specific call.
If you’re on a call and you receive a second call,
you will:
•
•
Hear a tone; and
See a message on your display informing
you of another incoming call.
e
Accepting Calls
Press C under YES. The first call is placed on hold.
To end the active call and accept the second call, press r.
www.motorola.com/iden
72
Call Waiting
Switching Between Calls
When you accept a second call while you are talking on the phone, your display
shows the name or number of each call. An icon appears to the left of each name
or number indicating that the call is on hold z or active D.
Press C under SWITCH to switch
between calls.
[
Declining Calls
Press C under NO. If you subscribe to Voice Mail, the call will be
forwarded to your Voice Mail box.
Ending the Active Call
Press r.
Turning Off Call Waiting
If you do not want to be interrupted during a call, you can turn Call Waiting off
prior to making/receiving a call.
1
2
From the Ready screen, press q. Press R to scroll to Settings,
and press C under SELECT.
Press R to scroll to In Call Setup and press C under SELECT.
73
3
4
Press R to scroll to Call Waiting and press C under CHANGE.
Press R to scroll to Off and press C under SELECT.
Call Waiting is now disabled for the next call. It will automatically reset
to On when you hang up.
Call Hold
When you are on an active call, you can place the call on hold and make a
second call.
To place an active call on hold:
1
2
3
4
Press q to access the Calls Menu.
Press R to scroll to Hold.
Press C under SELECT.
If you have not placed a second call, you can resume this call by
pressing C under RESUME.
To place a second call while the first call is on hold:
1
2
Enter the second phone number you want to call. Or select the number
from your Phonebook by pressing q and selecting Phonebook.
Press s to place the second call.
To toggle between the two calls:
Press C under SWITCH.
To end the active call:
Press s. The call on hold becomes active.
www.motorola.com/iden
74
Three-Way Calling
Three-Way Calling
Using Three-Way Calling, you can combine two ongoing phone calls into one
conversation. While on an active call, you can make a second call and combine
the two calls. When you place or receive a phone call, the 3-WAY option
appears in the bottom right-hand corner of the display screen.
To make a three-way call:
1
2
3
4
5
Place or receive a phone call.
Press R to scroll to 3 Way.
Press C under SELECT. The first call will be placed on hold.
Enter the second phone number you want to call and press s to place
the second call.
Or, access the number from your Phonebook:
Press q and then press R to scroll to Phonebook.
Press C under SELECT.
To place the call, see “Making Calls from the Phonebook” on page 62.
6
7
8
After you reach the second individual, press q.
Press S to scroll to 3 Way.
Press C under SELECT. Both calls will appear on your display.
75
Call Forwarding
Call Forwarding forwards calls to the number you designate. The following Call
Forwarding options are available:
•
•
Off — No calls are forwarded.
All Calls — When this option is turned on, all calls will be sent
automatically to a number you specify.
•
Detailed — Choosing this option enables you to forward calls you missed
to different numbers, or to Voice Mail, depending on why you missed each
call:
•
•
Busy — your phone is engaged in other activities.
No Answer — you do not answer. The phone will ring 4 times before
forwarding the call.
•
Unreachable — your phone is out of coverage or powered off.
NOTE: For you to receive Voice Mail messages, the All Calls option
must be set to Off and the Detailed options must be set to your
Voice Mail access number. Your Voice Mail access number is
the first six digits of your 10-digit phone number followed by
6245. This is the default setting.
You can forward Line 1 and Line 2 independently.
When your phone is set to forward all calls, one of the following icons appears
on the top row of your display screen to indicate the call forwarding option you
have chosen:
Icon
Indicates...
G
Line 1 is active; calls from Line 1 are being
forwarded.
H
I
J
Line 1 is active; calls from Line 2 are being
forwarded.
Line 1 is active; calls from Line 1 and Line
2 are being forwarded.
Line 2 is active; calls from Line 1 are being
forwarded.
www.motorola.com/iden
76
Call Forwarding
K
L
Line 1 is active; calls from Line 2 are being
forwarded.
Line 2 is active; calls from Line 1 and Line
2 are being forwarded.
Turning On Call Forwarding
1
2
3
Press q then press R to scroll to Call Forward.
Press C under SELECT.
At the Call Forward screen, the Forward
field is highlighted. Press C under
CHANGE.
W
4
5
6
Press S to scroll to All Calls.
Press C under SELECT.
Press R to scroll to the To field and press C under CHANGE.
77
7
To activate a call forwarding number:
If you have never used Call Forwarding before, the Forward screen
appears. To enter a call forwarding number, type the number on your
phone’s keypad or press C under SEARCH to select from numbers
stored in your phone. Press C under OK.
Or,
If you have used Call Forwarding before, the call forwarding number
you last used is displayed. Press C under CHANGE to access the
Forward screen.
To forward your calls to this number, press C under OK.
To forward your calls to a different number, press and hold C under
DELETE to erase the displayed number. Type the new number on your
phone’s keypad or press C under SEARCH to select from numbers
stored in your phone. Press C under OK.
Your calls will now be forwarded to the number that you selected.
Turning Off Call Forwarding
1
2
Press q then press R to scroll to Call Forward.
Press C under SELECT.
The Call Forward screen displays with the Forward field highlighted.
www.motorola.com/iden
78
Call Forwarding
3
4
Press R to scroll to the To field and press C under CHANGE.
under SELECT.
{
Setting Call Forwarding to Voice Mail
In most cases, turning off Call Forwarding restores your ability to receive Voice
Mail messages when you are unavailable (see “Turning Off Call Forwarding”
on page 78). If you have completed those steps but are still not able to receive
Voice Mail messages, you can reset Call Forwarding to Voice Mail.
For you to receive Voice Mail messages, Call Forwarding must be set to
Detailed with your Voice Mail access number:
1
2
Press q then press R to scroll to Call Forward.
Press C under SELECT.
The Call Forward screen displays with the Forward field set to
Detailed.
3
4
Press R to scroll to the If Busy field and press C under CHANGE.
The call forwarding number you last used is displayed. Press C under
CHANGE. If this is your Voice Mail access number (the first six digits
of your 10-digit phone number followed by 6245), go to step 7.
5
6
Press and hold C under DELETE to erase the displayed number.
Enter your Voice Mail access number.
Your Voice Mail access number is the first six digits of your 10-digit
phone number, followed by 6245. (For example 7035556245.)
79
7
8
Press C under OK.
Repeat step 3 through step 7 for the If No Answer field and the If
Unreachable field.
9
When finished, press C under EXIT.
NOTE: You can use the Detailed setting to forward calls to other
numbers if desired. However, it is recommended that you leave
Detailed set to the Voice Mail access number and use the All
Calls setting if you wish to forward your calls to another
number.
www.motorola.com/iden
80
Messages
The main topics covered in this section are listed below:
Message Center
Page 81
Page 82
Page 84
Page 86
Page 87
Voice Mail
Text and Numeric Messaging
Net Alert
Using Your Phone as a Modem
Message Center
The Message Center enables you to access all messaging services through one
screen.
To access the Message Center:
If MESG is one of your display options:
From the Ready screen, press C under MESG.
If MESG is not one of your display options:
1
2
3
From the Ready screen, press m.
Press R to scroll to Messages.
Press C under SELECT.
The Message Center screen displays the number of messages you have in each
message service — Voice Mail, Text Msgs (Text and Numeric Messages), and
Net Alert (Net Mail).
81
To access any message service:
1
2
From the Message Ctr screen, press R to scroll to the message service
you want to access.
Press C under the display option on the right. This option varies
depending on the message service selected.
Voice Mail
New Message Indicators
When you receive a new message:
•
New Voice Mail Message will display on the screen.
f
•
Your phone will alert you every 30 seconds until you press C under
CALL or C under EXIT. (If you are on a call, your phone will alert you
once during the call.)
Transferring Calls to Voice Mail
Press C under NO while your phone is ringing to transfer incoming
calls directly to Voice Mail.
www.motorola.com/iden
82
Using Voice Mail
Using Voice Mail
Logging Into Voice Mail
1
From the Ready screen, press C under
MESG to open up the Message Center
screen.
A
g
2
Voice Mail should be highlighted to
indicate that it is selected. If it isn’t
highlighted, press S to scroll to the Voice
Mail field.
The number of new messages and the total
number of messages are displayed.
3
Press C under CALL to log into your Carrier’s Voice Mail System.
Calling displays as you are connected to the network.
83
Text and Numeric Messaging
With Text and Numeric Messaging, your phone will:
•
Allow numeric messages up to 20 characters in length and text (alpha)
messages up to 140 characters in length.
•
Accept your messages even if you are unavailable, if your phone is turned
off, or if you are busy on another call.
•
•
Alert you of a new text or numeric message, even if you are on another call.
Store a message if you are making a Private or Group call and deliver it
upon completion of the call.
•
•
Store the message if you are outside of the coverage area and deliver it as
soon as you are back in a coverage area.
Attempt continuous delivery of messages until successful, for up to 7 days.
With Text and Numeric Messaging, your phone will:
•
•
•
Refer to text and numeric messages as Text Messages.
Stamp the message with the time and date the message was left.
Store up to 16 messages at a time, that will remain until you delete them.
NOTE: “Mail Waiting, Memory Full” displays when 16 message
registers are full. (Messages must be erased before you can
receive others.)
•
Allow for “Auto Call Back” of a phone number that is included within a
message, by pressing s. If the message contains two phone numbers, Auto
Call Back will dial the last number.
www.motorola.com/iden
84
Text and Numeric Messaging
New Messages Indicators
When you receive a new message:
•
New Text Message will display on the screen.
i
•
Your phone will alert you every 30 seconds until you press C under
READ or C under EXIT. (If you are on a call, your phone will alert you
once during the call.)
Accessing New Messages
When you receive a message, you can view it immediately or later:
View a Message Immediately
1
2
Press C under READ. The message displays.
If the message fills more than one screen, use S to scroll through the
rest of the message.
3
Press C under SAVE to save the message.
Or,
Press C under DELETE to delete the message.
Viewing a Message Later
Press C under EXIT. The . icon will appear on the second line of the
Ready screen to remind you that you have a stored message.
85
Viewing Stored Messages
1
In the Message Ctr screen, press S to scroll down to Text Msgs. The
number of new messages and the total number of messages are
displayed.
2
3
Press C under SELECT. The Text Msg Inbox screen appears.
Press S to scroll to the message you want to read and press C under
READ.
4
5
If the message fills more than one screen, use S to scroll through the
rest of the message.
Press C under SAVE to save the message.
Or,
Press C under DELETE to delete the message.
Net Alert
With Net Alert, you can send text and numeric messages in any of three ways:
•
•
•
from your i30sx phone
from a web site provided by your service provider
from any email application
When you receive a new message:
•
Words will display on your phone’s display screen indicating that you have
a Net Alert message. (The exact words displayed are determined by your
service provider.)
•
Your phone will alert you every 30 seconds until your press C to access
the message or press C to exit the screen.
If you choose to exit the screen and view the message later, the . icon will
appear on the second line of the Ready screen to remind you that you have a
stored message.
You can view new or stored Net Alert messages at any time by access the
Message Center. For more information, see “Message Center” on page 81.
www.motorola.com/iden
86
Using Your Phone as a Modem
Using Your Phone as a Modem
NOTE: Some features may be network dependent or subscription only,
and may not be available in all areas. Contact your service
provider for more information.
You can use your i30sx phone as a modem for data transfer from your laptop,
handheld device, or desktop computer. This is particularly useful when there is
no wired phone line (wall jack) available.
You simply attach a data cable (available separately) to your phone and your
computer. See “Data Accessories” on page 118. From that point, your phone is
your modem. This allows you to send or receive time-critical information such
as email, a field service report, or files. In addition, you can also send or receive
faxes.
This type of wireless connection uses one of two types of data connection:
circuit-switched data and packet data.
•
Circuit-switched data is typically used for sending and receiving faxes and
for transferring large files.
•
Packet data is used for small file transfers such as email.
To use these services, you must install the iDEN Wireless Data Services
software (available separately). For more information on setting up your
computer and your i30sx phone for Packet and Circuit Data calls, see the
Wireless Data Services User’s Guide and contact your carrier.
TTY Users
You can use your phone and computer in TTY mode. Your computer
screen and keyboard replace the standard TTY device. For more
information, please see the Wireless Data Services User’s Guide.
87
www.motorola.com/iden
88
Private Calls
The main topics covered in this section are listed below:
Private Call
Call Alerts
Group Call
Page 89
Page 91
Page 95
Private Call
There are several ways to reach an individual using Private calls. Whether you
dial the person’s Private ID directly or store it in your Phonebook or Recent
Calls list, you must have the individual’s Private ID to use Private calls. To learn
how to store names and numbers, see “Phonebook” on page 47.
USER TIP:To find out your own Private ID number, see “My
Information” on page 32.
Making a Private Call from the Keypad
1
2
Enter the Private ID of the person you are trying to call.
Press and hold the Push-To-Talk button (PTT) button on the side of the
phone. Begin talking after the phone emits a chirping sound.
3
Release the PTT button to listen.
Making a Private Call from the Phonebook
If you have stored a person’s Private ID in your Phonebook, you can use your
Phonebook to make a Private call to that person:
1
2
From the Ready screen, press q.
Press R to scroll to the Phonebook. Press C under SELECT.
89
3
4
5
From the Phonebook screen, press S to scroll through the names until
the desired name is highlighted.
Press and hold the PTT button on the side of the phone. Begin talking
after the phone emits a chirping sound.
Release the PTT button to listen.
Making a Private Call from the Recent Call List
1
2
3
From the Ready screen, press q.
Press R to scroll to the Recent Calls. Press C under SELECT.
From the Recent Calls screen, press S to scroll through the names and
numbers until the desired name or Private ID number is highlighted.
4
5
Press and hold the PTT button on the side of the phone. Begin talking
after the phone emits a chirping sound.
Release the PTT button to listen.
Receiving a Private Call
When you receive a Private call, your phone emits a chirping sound and Private
in Use appears on the screen. The Private ID or the name of the caller (if stored
in your Phonebook) displays on the screen.
To respond to a Private Call:
1
2
Wait for the caller to stop speaking.
Press and hold the PTT button. Begin talking after the phone emits a
chirping sound.
3
Release the PTT button to listen.
www.motorola.com/iden
90
Call Alerts
Storing Private IDs
For information store Private ID numbers to your Phonebook, see “Adding
Phonebook Entries” on page 52.
For information on how to quickly store Private ID numbers, see “Storing
Numbers and Private IDs Quickly” on page 56.
Call Alerts
You can send a call alert, which lets recipients know that you would like to talk
with them. When you send an alert, the recipient will receive a series of beeps
and your name or Private ID will appear on the display.
Placing a Call Alert from the Keypad
1
2
3
Enter the Private ID of the person you want to call.
Press C under ALERT. The Ready to Alert screen displays.
Press and hold the PTT button until Alert Successful displays. The alert
sounds intermittently until the user of the phone answers, queues, or
clears the alert.
Placing a Call Alert from the Phonebook
1
2
3
From the Ready screen, press q.
Press R to scroll down to Phonebook. Press C under SELECT.
From the Phonebook screen, press S to scroll to the Phonebook entry
for the person you want to alert.
91
4
Press C under ALERT. The Ready to
Alert screen appears.
V
5
Press and hold the PTT button until Alert Successful displays. The alert
sounds intermittently until the user of the phone answers, queues, or
clears the alert.
Ready to Alert Screen
Ready to Alert is used to confirm your request for the alert and to prompt you
to push the PTT button:
•
If you press the PTT button, the call alert is sent, and the phone displays the
Recent Calls screen.
•
For call alerts placed from the keypad, pressing C under CANCEL causes
the phone to return to the Dial screen with the previously entered number
displayed.
•
•
For call alerts placed from the Phonebook, pressing C under CANCEL
causes the phone to return to the Phonebook screen.
If you do nothing, the phone will revert to the Ready screen.
Receiving Call Alerts
When you receive a call alert, your phone emits a chirp and displays the name or
number of the caller. You can answer, queue, or clear the call alert:
•
•
•
To answer a call alert, press the PTT button.
To queue a call alert, press C under QUEUE.
To clear the call alert, press C under CLEAR.
www.motorola.com/iden
92
Call Alerts
Call Alert Queue
Call alert queuing enables you to save call alerts in a list, or queue. To store a
call alert in the call alert queue, press C under QUEUE when you have
received an incoming call alert.
Accessing the Call Alert Queue
1
2
3
From the Ready screen, press q.
Press R to scroll to Call Alert.
Press C under SELECT. The Call Alert Queue screen displays.
Viewing Call Alert Date and Time
To find out the date and time a call alert was received:
1
From the Call Alert Queue screen, press S to scroll to the desired call
alert.
2
3
4
Press q to access Call Alert Menu.
Press R to scroll to View.
Press C under SELECT.
Sorting Call Alerts
To sort your call alerts by the order they were received:
1
From the Call Alert Queue screen, press q to access Call Alert
Menu.
2
3
Press S to scroll to Sort By.
Press C under SELECT.
93
4
5
Press S to scroll to First on Top or Last on Top.
Press C under SELECT.
Responding to a Call Alert From the Queue
1
2
From the Call Alert Queue screen, press S to scroll to the call alert
you want to respond to. You can respond by sending a call alert or
placing a Private call.
To send a call alert, press C under ALERT and then press the PTT
button.
Or,
To place a Private call, press the PTT button.
The call alert will be removed from the queue.
Deleting a Call Alert From the Queue
To delete a call alert from the queue:
1
From the Call Alert Queue screen, press S to scroll to the entry you
want to delete.
2
3
4
5
Press q to access Call Alert Menu.
Press R to scroll to Delete.
Press C to SELECT.
When the confirmation screen appears, press C under YES to delete
all call alerts.
www.motorola.com/iden
94
Group Call
To delete all call alerts from the queue:
1
From the Call Alert Queue screen, press q to access Call Alert
Menu.
2
3
4
Press R to scroll to Delete All.
Press C to SELECT.
When the confirmation screen appears, press C under YES to delete
the entry.
Group Call
In a Group call, you can communicate instantly with a group of people that you
have previously set up as a Talkgroup. Your sales representative must set up
your Talkgroups by providing you with a Talkgroup number for each
Talkgroup. After you have the number, you can assign each Talkgroup number a
name and store it in your phone (see “Storing a Talkgroup” on page 95).
Talkgroups appear on your display as numbers or programmed names such as
SALES TEAM or Talkgrp 5. Your phone can store up to 30 Talkgroups. You
can initiate or participate in Group calls for Talkgroups that have been created
for you and that are stored in your Phonebook.
Storing a Talkgroup
1
2
3
4
5
6
From the Ready screen, press q.
Press R to scroll to Phonebook.
Press C under SELECT.
Press S to scroll to New Entry.
Press C under SELECT. The Entry Details screen displays.
Enter the information as you would any other Phonebook entry. (See
“Adding Phonebook Entries” on page 52.) When you get to Type, make
sure that you select Talkgroup.
95
7
8
Enter the Talkgroup name or number.
When you have completed the Entry Details, press C under DONE.
Making a Group Call from the Keypad
1
2
Press # and then enter the Talkgroup number of the group that you
want to call.
Press and hold the PTT button on the side of the phone or press C
under ALERT, and speak. The phones of individuals in the Talkgroup
will emit a chirping sound to alert them that someone is calling.
3
Release the PTT button to listen.
Making a Group Call from the Phonebook
1
2
From the Phonebook screen, press R to scroll to the name of the
Talkgroup you want to call.
Press and hold the PTT button on the side of the phone or press C
under ALERT, and speak. The phones of the people in the Talkgroup
will emit a chirping sound to alert them that someone is calling.
3
Release the PTT button to listen.
Making a Group Call from the Recent Calls List
1
2
From the Recent Calls screen, press R to scroll to the name of the
Talkgroup you want to call.
Press and hold the PTT button on the side of the phone or press C
under ALERT, and speak. The phones of individuals in the Talkgroup
will emit a chirping sound to alert them that someone is calling.
3
Release the PTT button to listen.
www.motorola.com/iden
96
Group Call
Receiving a Group Call
When you receive an incoming Group call, your phone emits a chirp.
To respond to a Group call:
1
2
Wait for the caller to finish speaking.
Press and hold the PTT button to talk. Release the PTT button to listen.
Joining a Talkgroup
Although you may be provisioned in more than one Talkgroup, you can only
participate in one Group Call at a time. When you join a new Group Call, you no
longer belong to your previous Group Call.
To join an ongoing Talkgroup:
1
Using the keypad, press # and then enter the Talkgroup number.
Or,
From the Phonebook screen, press R to scroll to the name of the
Talkgroup you want to join.
Or,
If the Talkgroup you want to join is on your Recent Call list, go to the
Recent Calls screen and press R to scroll to the name of the Talkgroup
you want to join.
2
Press C under JOIN.
97
Group-Silent Programming
Group-Silent programming enables you to silence incoming Group alerts and
communication.
Turning Group-Silent On or Off
1
2
3
4
5
6
From the Ready screen, press q.
Press R to scroll to Settings. Press C under SELECT.
Press R to scroll to Tkgrp Settings. Press C under SELECT.
With the Silent field highlighted, press C under CHANGE.
Press S to scroll to On or Off.
Press C under SELECT.
www.motorola.com/iden
98
Memo
The Memo application provides you with a place to store a numeric note (for
example a phone number) in your i30sx phone.
This section includes:
Adding a New Memo
Viewing a Memo
Editing a Memo
Page 99
Page 99
Page 100
Page 100
Deleting a Memo
Adding a New Memo
1
2
3
4
5
From the Ready screen, press q.
Press R to scroll to Memo.
Press C under SELECT. The Memo screen displays.
Type your numeric memo using the phone’s keypad.
Press C under STORE.
Viewing a Memo
1
2
3
4
From the Ready screen, press q.
Press R to scroll to Memo.
Press C under SELECT.
To call this number, press s.
99
Editing a Memo
1
2
3
4
From the Ready screen, press q.
Press R to scroll to Memo.
Press C under SELECT.
Type the new number.
You can delete a digit by pressing C under DELETE. To all the digits,
press and hold C under DELETE.
5
Press C under STORE.
Deleting a Memo
1
2
3
4
5
From the Ready screen, press q.
Press R to scroll to Memo.
Press C under SELECT.
Press and hold C under DELETE.
Press C under STORE.
www.motorola.com/iden
100
Customizing the i30sx phone
You can customize your i30sx phone to fit the way you want to use it.
This section includes:
Settings
Page 101
Settings
The phone’s Settings menu enables you to control many of the phone’s features
and functions, including display properties, message handling, and security
features.
To access the Settings menu:
1
2
3
From the Ready screen, press q.
Press S to scroll to Settings.
Press C under SELECT.
From the Settings screen, you can access these Settings options:
•
•
•
•
•
•
Ring/Volume — controls how your phone rings when you receive calls
and messages.
Phone Setup — sets call-answering features, turns off non-telephone
features, chooses which phone line is used, and sets your network ID.
In Call Setup — sets call timer, message notification, and call waiting
features.
Security — sets security features including phone lock, keypad lock, and
SIM PIN.
Personalize — controls which features are most accessible when you turn
on your phone.
Initial Setup — sets a variety of display features including the language
displayed, the screen contrast, time and date formats, current year,
backlight, status light, and scrolling. Also turns auto redial on or off and
sets baud rate.
•
Voice Volume — sets the volume of your phone’s earpiece and speaker.
101
•
•
Tkgrp Settings — sets certain Talkgroup options.
Service Status — shows the status of your phone’s services.
To access any of these options:
1
2
From the Settings screen, press R to scroll to the option you want to
access.
Press C under SELECT.
Many of these options have other options within them. Press S to scroll
through the lists of options, and press C to select and modify options and the
features, according to the instructions on your phone’s screen. For some options,
you can also press T to select sub-options.
In screens that show lists of options for a setting, a check mark to the left of the
option indicates the current option for the setting.
Ring/Volume
Ring/Volume enables you to control how your phone rings when you receive
calls and messages.
Main Options
Ring/Volume provides these main options:
•
•
•
Ringer Vol — sets ring volume.
Keypad Vol — sets volume of sounds associated with keypad actions.
Mail Vol — sets volume of Text Message, Voice Mail, and Net Alert
notifications.
•
Data Vol — sets data volume.
•
Headset — choosing the HdsetOnly option prevents sound from being
emitted from the phone’s speaker when the headset is being used.
•
SilentAll — sets the phone to notify you of all calls on the phone’s screen
only.
•
•
•
•
Line 1 — sets the ring style and type of notification for calls on Line 1.
Line 2 — sets the ring style and type of notification for calls on Line 2.
Pvt/Grp — sets type of notification for Private and Group Calls.
Call Alert — sets the ring style and type of notification for Call Alerts.
www.motorola.com/iden
102
Settings
•
•
•
Text Msgs — sets type of notification for Text Messages.
Voice Mail — sets type of notification for Voice Mail messages.
Net Alert — sets type of notification for Net Alert messages.
Ring Style and Notification Type
When you set SilentAll to On, your phone notifies you of all types of calls,
messages, and alerts on the phone’s screen.
When you set SilentAll to Off, the following features display after SilentAll on
the Ring/Volume screen, enabling you to set notification options for each:
•
•
•
•
•
•
•
Line 1 — sets the ring style and type of notification for calls on Line 1.
Line 2 — sets the ring style and type of notification for calls on Line 2.
Pvt/Grp — sets type of notification for private and group calls.
Call Alert — sets the ring style and type of notification for call alerts.
Text Msgs — sets type of notification for Text Messages.
Voice Mail — sets type of notification for Voice Mail messages.
Net Alert — sets type of notification for Net Alert messages.
To set SilentAll to Off or On:
1
2
3
4
From the Ring/Volume screen, press S to scroll to the SilentAll:.
Press C under CHANGE.
Press S to scroll to Off or On.
Press C under SELECT.
Ring Styles
When you set a ring style, you can choose from any of nine pre-set ring styles.
To set a ring style:
1
From the Ring/Volume screen, ensure that SilentAll is set to Off. Then
press S to scroll to any of the features that allow you to set a ringer
style: Line1, Line2, or Call Alert.
2
Press C under SELECT.
103
3
4
5
With the Style field highlight, press C under CHANGE.
Press R to scroll to the ring style you want to assign to the feature.
To assign the ring style, press C under SELECT.
TIP:
To hear the ring style you have selected, press the volume
button on the side of your phone.
Notification Types
When you set a notification type, you have these options:
•
•
Ring — the phone rings to notify you.
Silent — the phone does not ring to notify you.
To set a notification type:
1
From the Ring/Volume screen, ensure that SilentAll is set to Off. Then
press S to scroll to any of the features on the Ring/Volume screen
after SilentAll.
2
3
4
Press C under SELECT.
With the Type field highlighted, press C under CHANGE.
Press R to scroll to the notification type you want to assign to the
feature.
5
To assign the notification type, press C under SELECT.
Phone Setup
Phone Setup sets some basic phone features. Access Phone Setup to set the
following options:
•
Line — enables you to choose Line 1 or Line 2 as the active line for
outgoing calls.
•
AutoAns — sets your phone to automatically answer an incoming call
after a specified number of rings. When this feature is turned on, the phone
answers by connecting you to the caller; it does not send the call to Voice
Mail, unless you are out of coverage or on the line.
www.motorola.com/iden
104
Settings
•
•
•
Any Key — when turned on, enables you to answer calls by pressing any
key on the alphanumeric keypad.
Phone Only — when turned on, prevents your phone from making or
receiving Private calls or Group calls.
Network ID — enables you to set the phone’s network IDs and their
roaming options.
In Call Setup
In Call Setup sets the in-call timer, message notification, and call-waiting
features.
•
The In Call Timer option turns the following features on and off:
•
•
Display — the duration of each call displays on the phone’s screen.
Minute Beep — an audible beep occurs every minute of an active
call.
•
The Notifications option controls message notification during calls:
•
•
Receive All — notifies you of all types of messages during calls.
Msg Mail Only — notifies you of mail messages only; all other types
of message notifications are delayed until the call has ended.
•
Delay All — delays notification of all messages until the call has
ended.
•
Call Waiting — enables you to turn off call waiting for the next call. After
you hang up, call waiting is turned back on.
Security
Security allows you to set security features:
•
•
Phone Lock — sets an optional code that locks your phone.
Keypad Lock — displays instructions for locking and unlocking your
phone’s keypad.
•
•
SIM PIN — enables and disables your phone’s SIM PIN requirement.
New Passwords — enables you to change your phone’s security code,
phone unlock code, and SIM PIN.
•
Master Reset — allows your service provider to reset your service in the
event of a security or provisioning problem.
105
Using Phone Lock
The Phone Lock feature enables you to prevent your phone from being used
unless an Unlock code is typed into the keypad.
The Unlock code is required to enable the phone lock feature, to unlock the
phone, and to set a new Unlock code. Contact your service provider for your
default Unlock code.
Phone lock provides two options for locking the phone:
•
•
Lock Now locks the phone immediately after you set the option.
Auto Lock locks the phone the next time the phone is powered on.
Setting Keypad Lock
Choosing the Keypad Lock option displays instructions for locking and
unlocking your phone’s keypad. See “Keypad Lock” on page 28 for more
information on locking the keypad.
Enabling and Disabling SIM PIN
The SIM PIN option enables and disables the feature that requires a SIM PIN
code to be typed into the phone to access the information on the SIM card and to
make or receive calls. See “SIM Card Personal Identification Number (PIN)” on
page 19 for more information.
Setting New Passwords
The New Passwords option enables you to set three types of passwords that
control access to your phone:
•
Unlock Code — this code is used to control access to the phone using
Phone Lock. It is also required to access the Master Clear and Feature
Reset features. If you want to use any of these features, contact your
service provider for your default Unlock code.
•
•
Security Code — this code is used to access the Master Reset feature
under the direction of your service provider. It can also be used to override
your Unlock code under the direction of your service provider.
SIM PIN — this code is used to access the information on your SIM card
and to make or receive calls. Using Master Reset
Using Master Reset
The Master Reset option is provided for use only under the direction of your
service provider. It resets your service.
www.motorola.com/iden
106
Settings
Initial Setup
Initial Setup enables you to control a variety of your phone’s features that you
may want to modify when you first get your phone:
•
Time/Date Format — sets the format in which the time and date display
on your phone.
•
•
•
•
Year — sets the current year.
Auto Redial — turns the automatic redial feature on and off.
Backlight — controls how long your phone’s backlight stays on.
Sensor - controls the photo sensor to activate the backlight when your
phone is in poor lighting conditions.
•
Status Light — controls whether the status light is on when the phone is
on.
•
•
•
•
Contrast — sets the display contrast lighter or darker.
Scroll — sets how you can scroll lists and menus.
Language — sets the language that your phone displays.
Master Clear — returns all settings to their original defaults and erases all
stored lists. Use only under the direction of your service provider.
•
•
•
•
Feature Reset — returns all settings to their original defaults. Use only
under the direction of your service provider.
Baud Rate — sets the baud rate at which your phone communicates when
connected to a laptop computer, PC, or similar device.
TTY Setup — sets TTY options. By default, your phone is set to function
with a TTY device.
TTY Baud Rate — sets the baud rate at which your phone communicates
when connected to a TTY device.
•
•
Alert Timeout - controls the amount of time the Call Alert tone sounds.
Return to Home - controls how long the Recent Calls screen displays
before returning to the idle screen.
Changing Time and Date Format
Your phone displays times in 12-hour-clock format (12:00 am through 11:59
pm) or 24-hour-clock format (0:00 through 23:59). It displays dates in month/
day format or day/month format.
NOTE: If you turn the time and date display off, no times are associated
with calls on your Recent Calls list.
107
To set the time and date format, or turn time and date display on or off:
1
2
From the Initial Setup screen with Time/Date Format highlighted,
press C under SELECT to access the Time/Date Format screen.
To change the time format:
With Time Format: highlighted, press C under CHANGE to access
the Time Format screen.
Press S to highlight the time format you want.
Press C under SELECT.
3
4
To change the date format:
Press S to highlight Date Format:, and press C under CHANGE to
access the Date Format screen.
Press S to highlight the date format you want.
Press C under SELECT.
To turn the time and date format on or off:
Press R to highlight Display:, and press C under CHANGE to access
the Display screen.
Press S to choose Off or On.
Press C under SELECT.
Setting Auto Redial
When Auto Redial is set to On, if you receive a System Busy, Try Later
message while making a call, the phone will redial the number automatically.
You will hear a ring-back tone when a successful call is placed.
When Auto Redial is set to Off, you must press and hold s to redial the last
number dialed.
www.motorola.com/iden
108
Settings
Setting Backlight Timer
The backlight illuminates the display when you receive or make calls. You can
set the amount of time that the backlight stays on to 5, 10, 20, or 30 seconds, or
set it to stay on continuously or stay off at all times.
1
2
3
4
From the Initial Setup screen, press R to scroll to Backlight.
Press C under CHANGE.
Press S to scroll to the desired backlight option.
Press C under SELECT.
NOTE: Setting the backlight to stay on continuously will decrease the
amount of time you can use the phone before recharging the
battery.
Setting Photo Sensor
To conserve battery power, the photosensor will disable the backlight when you
are in good lighting conditions. To force the backlight to come on every time a
key is pressed, you can turn the photosensor off.
NOTE: Setting the Backlight to come on continuously while the
Photosensor is turned on will drain your battery power.
1
2
3
4
From the Initial Setup screen, press R to scroll to Sensor.
Press C under CHANGE.
Press S to scroll to the desired option.
Press C under SELECT.
Adjusting Status Light
The status light is located on the top of the phone. It illuminates when the phone
is on. See “Status of Your i30sx Phone” on page 31. You can turn the status
light feature on or off from the Initial Setup screen.
109
Setting Contrast
You can set the contrast of your phone’s display to be lighter or darker. Use T
to increase or decrease the contrast.
Setting Scrolling
You can set your phone to scroll through menus and lists in either of two ways:
•
Up/Down — when you reach the bottom or top of list or menu scrolling
stops until you scroll in the other direction.
•
Wrap Around — when you reach the bottom or top of a list or menu
scrolling “wraps” around and continues at the other end of the list or menu.
You can set the scrolling style from the Initial Setup screen using the Scroll
option.
Changing Display Language
You can customize the i30sx phone to display menus in English, French,
Spanish, or Portuguese. The default language is English.
To change the display language:
1
2
3
4
From the Initial Setup screen, press R to scroll to Language.
Press C under CHANGE.
Press R to scroll to the language you want your phone to display.
Press C under SELECT.
Master Clear
Master Clear returns all your phone’s settings to their original factory defaults
and erases all stored lists. To use this feature, you must contact your service
provider to receive your phone’s Unlock code.
Feature Reset
Feature Reset returns all your phone’s settings to their original defaults. To use
this feature, you must contact your service provider to receive your phone’s
Unlock code.
www.motorola.com/iden
110
Settings
Setting Baud Rate
You can set your phone’s baud rate from the Initial Setup screen. Scroll to the
Baud Rate option and then choose the baud rate you want, or choose Auto to
set your phone to automatically choose the appropriate baud rate.
Setting TTY Mode `
NOTE: This feature may not be offered by your service provider.
TTY Setup enables you to set your options for using your phone with a
teletypewriter (TTY) device. By default, your phone is set to function with a
TTY device in TTY mode.
Your phone supports the following TTY modes:
•
•
TTY — for calls in which you type and read text on your TTY device.
VCO (Voice-Carry-Over) — for calls in which you speak into your phone
and read text replies on your TTY device.
•
HCO (Hearing-Carry-Over) — for calls in which you type text on your
TTY device on listen to voice replies on your phone’s speaker.
You can set your TTY mode using your phone’s Settings menu at any time, or
by issuing commands from your TTY device while on an active call.
To set your phone’s TTY mode using your phone’s Settings menu:
1
2
3
4
From the Initial Setup screen, press R to scroll to TTY Setup.
Press C under CHANGE.
Press S to scroll to the desired TTY mode; Off, TTY, VCO, or HCO.
Press C under SELECT.
To set your phone’s TTY mode from your TTY device, issue one of the
following commands while on an active call:
•
•
“VCO please” — to select VCO mode.
“HCO please” — to select HCO mode.
111
•
“HCO off please” — to turn off HCO mode.
When you are using HCO, the sound coming from
IMPORTANT:
your phone speaker may be uncomfortably loud.
Use caution when putting the phone to your ear.
(For information on setting your phone’s speaker
volume, see “Voice Volume” on page 113.)
NOTE: TTY device manufacturer’s proprietary feature such as Turbo-
Code, High-Speed, and Interruption are not supported by your
phone. These features must be turned off or disabled to use
your TTY device with your phone.
Setting TTY Baud Rate
NOTE: This feature may not be offered by your service provider.
By default, your phone’s TTY baud rate is set to 45.45, the baud rate required
for TTY calls within the US. To make calls outside the US, set your TTY baud
rate to 50.0.
To change the TTY baud rate:
1
2
3
4
From the Initial Setup screen, press R to scroll to TTY Baud.
Press C under CHANGE.
Press S to scroll to the baud rate for your location.
Press C under SELECT.
Alert Timeout
Alert timeout controls the amount of time the Call Alert tone sounds. The
display will continue to show the alert information even though the Call Alert
tone has stopped.
You can set your phone’s alert timeout rules from the Settings/Initial Setup
screen. Scroll to the Alert Timeout option and then choose the desired interval.
(No Alert Tone, 5 Minutes, 15 Minutes, 30 Minutes, 1 Hour, or Continuous.
Return to Home
You can control the amount of time that the recent call screen displays after a
call. You can set different timeouts (30 seconds, 1 min, 5 min, or 10 min) for
phone calls and private calls:
www.motorola.com/iden
112
Settings
•
•
After Phone — Set the time that the recent calls screen displays after a
phone call.
After Prvt/Group — Set the time that the recent calls screen displays after
a private or group call.
To set the recent calls timeout.:
1
2
3
4
From the Initial Setup screen, press R to scroll to Return to Home.
Press C under CHANGE.
Press S to scroll to the desired display option.
Press C under SELECT.
Voice Volume
Voice Volume sets the volume of the sound coming from your phone’s earpiece
or speaker:
1
From the Voice Volume screen, highlight Earpiece Vol: to set the
earpiece volume, or press R to scroll to Speaker Vol: to set the speaker
volume.
2
3
Press C under CHANGE.
To select a volume level:
Press T to raise of lower the volume setting.
Or,
Press the Volume Control buttons on the side of your phone.
4
Press C under OK.
Tkgrp (Talkgroup) Settings
Tkgrp Settings enables you to set certain Talkgroup options. See “Group Call”
on page 95 for more information.
113
Accessories
To order additional accessories, log on to our Web site at: www.motorola.com/
store/iden or contact your Motorola Authorized Retailer.
This section includes the following topics:
Batteries
Page 115
Page 116
Page 118
Travel Chargers
Data Accessories
Batteries
o
For best results, charge the batteries within the temperature range of 10 C to
o
o
o
40 C (50 F to 104 F).
Prolonged charging is not recommended. For battery charging guidelines, see
Table below.
Charging Lithium Ion Batteries
The following table provides the approximate time to fully charge a battery
using a Motorola iDEN Approved Lithium Ion battery charger. Check the kit
number on your battery and charger to determine the appropriate charging time.
Battery Charging Times
MOTOROLA BATTERIES
Charging Time to 100%
Kit Number
Description/
Chemistry
Economy
Rapid
Charger
(NTN4716)
Mid-Rate
Charger
(SPN4940)
Charger
(SPN4808)
SNN5716
Maximum
8 hours
5 hours
3 hours
8 hours
Capacity Li Ion
Battery
SNN5705
High
Performance Li
Ion Battery
2 hrs 30
min
5 hours
NOTE:Charging times are based on a fully discharged battery.
115
For optimal battery life, use a Motorola iDEN Approved Lithium Ion battery
charger with your Motorola iDEN Lithium Ion battery. Other chargers may not
fully charge your Lithium Ion battery.
Additional Battery Information and Instructions
Battery Operating Instructions
•
•
•
•
Extreme temperatures will degrade battery performance. Do not store your
battery where temperatures exceed 60°C (140°F) or fall below -20°C (4°F).
Lithium Ion batteries have a self discharge rate and without use, will lose
about 1% of its charge per day.
The battery capacity will be degraded if stored for long periods while fully
charged. If long term storage is required, store at half capacity.
The Motorola iDEN Approved Lithium Ion chargers will provide optimum
performance. Other chargers may not fully charge your iDEN Lithium Ion
battery or may yield reduced number of lifetime charge cycles.
•
•
If the battery appears inoperative, the internal protection circuitry may
have been activated. Remove the battery from the phone and put it into the
charger for several minutes to reset the circuitry.
When batteries are not in use, always store them in the plastic safety tray.
Travel Chargers
Using one of the Travel Chargers listed below, you can charge a battery from an
AC outlet. On one end of the Travel Charger, an accessory connector attaches to
the bottom of the phone. At the other (AC outlet) end of the device, there is a
compact housing that contains the plug-in power supply.
TRAVEL CHARGERS
Kit Number
SPN4940
SPN4716
SPN4992
Description
Multi-Voltage Travel Charger
Rapid Multi-Voltage Travel Charger
Mid-Rate Economy Travel Charger
NOTE:Additional adaptor plugs to accommodate various International
power outlets can be purchased separately for the multi-voltage
Travel Chargers.
www.motorola.com/iden
116
Travel Chargers
Accessory
Connector
Accessory
Connector
Rapid Travel Charger
Economy Travel Charger
Using the Travel Charger
1
While holding the phone with its keypad facing up, insert the accessory
connector (with the Motorola logo facing you) into the bottom of the
phone until you hear a click.
2
If you have either the Mid-Rate Multi-Voltage Travel Charger or the
Rapid Multi-Voltage Travel Charger, flip open the prongs, and plug the
Travel Charger transformer into an AC wall outlet.
Or
If you have the Mid-Rate Economy Travel Charger, plug the Travel
Charger transformer into an AC wall outlet.
Mid-Rate Charger Operating Specifications
Input voltage range: 90-264 VAC @ 50/60 Hz.
Operating temperature range: 0°C to +50°C
Standard Charger (U.S. Only)
Input voltage range: 90-120 VAC @60Hz.
Operating temperature range: 0°C to +50°C
117
Data Accessories
Universal Serial Bus (USB)
Your user will be able communicate with USB capable laptop and desktop
computers.
USB capable i30sx phone supports both RS232 communications and USB
communications (with USB mother devices). The i30sx phone will
automatically detect whether an RS232 or USB cable has been connected to it
and will utilize the appropriate protocol accordingly. No other action is required
by the user in order to select between USB or RS232 serial communications.
iDEN PC applications will support USB drivers for the following operating
systems only:
•
•
Windows 98 Second Edition (SE)
Windows 2000
USB Cable End
Phone Cable End
PC Applications Supported
•
•
•
•
•
•
RSS
Tethered Circuit Data
iDEN CompanionPro
SDK (Windows only, Palm SDK not supported)
iDEN Update ~ after first upgrade
iDEN Applet for Data Services
www.motorola.com/iden
118
Data Accessories
Data Cable
The RS232 Data Cable facilitates quick and easy data synchronization between
your i30sx phone and a PC. This cable accommodates both circuit and packet
data applications. The cable also features a charging port. Any applicable phone
charger may be used to charge the phone simultaneously.
Port for charging source
Using the Data Cable
1
2
While holding the phone with its keypad facing up, insert the accessory
connector (with the Motorola logo facing you) into the bottom of the
phone until you hear a click.
Insert the data plug directly into your PC or one of the many other data
compatible iDEN accessories.
119
Dual Port Adapter Cable
The Dual Port Adapter Cable enables in-vehicle communications and charging
of the i30sx phone via the Hands-Free Car kit, while being simultaneously
connected for data operations.
C
A
R
K
I
DATA
Using the Dual Port Adapter Cable
1
Insert the flat end of the Dual Port Adapter Cable cord into the bottom
connector of the i30sx phone. Make sure the Motorola logo is facing
upward.
2
3
Insert the round end of the RS232 Data Cable into the receptacle on the
Dual Port Adapter Cable labeled “Data”.
Insert the Hands-Free Car Kit into the receptacle on the Dual Port
Adapter Cable labeled “Car Kit”.
www.motorola.com/iden
120
Data Accessories
PDA Converter Plugs
The PDA (Pocket Digital Assistant) plug is a convenient way to connect your
i30sx phone to many types of PDA devices, both PC and Windows CE
compatible.
Below is the list of adapters which can be used with your i30sx phone:
Item Number
NTN6546
NKN6547
NTN8993
Description
Palm IIITM/VIITM Cable Adapter
Palm VTM Cable Adapter
Generic Pocket Digital Assistant (PDA) -Male-
Female Serial Adapter (Not Shown)
NTN6546 and
NTN6547 Type Plug
Using the PDA Converter Plug
1
2
While holding the phone with its keypad facing up, insert the accessory
connector (with the Motorola logo facing you) into the bottom of the
phone until you hear a click.
Connect the opposite end of the data cable to the PDA converter.
121
3
4
Connect other end of PDA converter to the mating connector of the
PDA device.
If you are using the NTN8993 PDA adapter, connect the other end of
the adapter to the PDA’s supplied data synchronization cradle and place
the PDA into the cradle.
NOTE:Please see the label on the bottom of your Dual-Pocket Desktop
Charger for more information regarding battery charging status.
www.motorola.com/iden
122
Other Important Information
This section includes the following topics:
Understanding Status Messages
Safety and General Information
Limited Warranty Information
Patent and Trademark Information
Page 123
Page 125
Page 135
Page 143
Understanding Status Messages
The following table lists and describes the status messages.
Status Messages
Number Not in Service
User Not Available
Message Description
The number that you entered is not valid.
The phone that you called is either busy, out-
of-coverage, or turned off. Please try again
later.
The person that you called has not purchased
this service.
User Not Authorized
Please Try Later
This service is temporarily not available.
Please try again later.
The phone that you called is busy in a Private
call.
User Busy in Private
User Busy in Data
Service Restricted
Service Not Available
The phone that you called is busy in a Dial-Up
call.
This service was restricted by your service
provider, or this service was not purchased.
This feature is not available on the current
network.
123
Status Messages
Message Description
The system is experiencing heavy traffic.
Please try again later.
System Busy Try Later
This service cannot be enabled because an
incompatible service has already been turned
on.
Service Conflict
An error occurred. Please try again.
Please Try Again
Self Check Error
A fault was detected with your phone. If this
error recurs, note the error code and contact
Customer Care.
An operational fault was detected with your
phone. Note the numeric code, turn your phone
off, and contact Customer Care.
Self Check Fail
The incorrect PIN was entered three
PIN Blocked
consecutive times. You will be unable to place
or receive calls on your i30sx phone. Call your
service provider to have them obtain the PIN
Unblocking Key (PUK) code.
Call Your Provider
Your SIM Card is not being detected. Please
check to ensure that you have inserted the SIM
Card.
Insert SIM
Please check your SIM Card to make sure it
has been inserted properly.
Check SIM Card
You have entered an incorrect PIN number.
Wrong PIN
Your phone will not accept a SIM card that is
not from your carrier.
Wrong Code
Warns of low memory for Net Alerts
New Browser
Message
Memory Full!
www.motorola.com/iden
124
RF Operational Characteristics
Safety and General Information
IMPORTANT INFORMATION ON SAFE AND
EFFICIENT OPERATION.
READ THIS INFORMATION BEFORE USING
YOUR INTEGRATED MULTI-SERVICE
PORTABLE RADIO.
RF Operational Characteristics
Your radio product contains a radio frequency transmitter to convey the
information you wish to send as well as occasional automatic signals used to
sustain connection to the wireless network, and a receiver which enables you to
receive communication and connection information from the network.
PORTABLE RADIO PRODUCT OPERATION AND
EME EXPOSURE
Your Motorola radio product is designed to comply with the following national
and international standards and guidelines regarding exposure of human beings
to radio frequency electromagnetic energy (EME):
•
•
•
•
•
•
United States Federal Communications Commission, Code of Federal
Regulations; 47 CFR part 2 sub-part J
American National Standards Institute (ANSI) / Institute of Electrical and
Electronics Engineers (IEEE). C95. 1-1992
Institute of Electrical and Electronics Engineers (IEEE). C95. 1-1999
Edition
National Council on Radiation Protection and Measurements (NCRP) of
the United States, Report 86, 1986
International Commission on Non-Ionizing Radiation Protection (ICNIRP)
1998
Ministry of Health (Canada). Safety Code 6. Limits of Human Exposure to
Radio frequency Electromagnetic Fields in the Frequency Range from 3
kHz to 300 GHz, 1999.
•
Australian Communications Authority Radiocommunications
(Electromagnetic Radiation - Human Exposure) Standard 1999 (applicable
to wireless phones only)
125
To assure optimal radio product performance and make sure human
exposure to radio frequency electromagnetic energy is within the guidelines
set forth in the above standards, always adhere to the following procedures:
Phone Operation
When placing or receiving a phone call, hold your radio product as you would a
wireline telephone. Speak directly into the microphone.
Two-way radio operation
When using your radio product as a traditional two-way
radio, hold the radio product in a vertical position with
the microphone one to two inches (2.5 to 5 cm) away
from the lips.
Body-worn operation
To maintain compliance with FCC RF exposure guidelines, if you wear a radio
product on your body when transmitting, always place the radio product in a
Motorola approved clip, holder, holster, case or body harness for this
product. Use of non-Motorola-approved accessories may exceed FCC RF
exposure guidelines. If you do not use a Motorola approved body-worn
accessory and are not using the radio product in the intended use positions
along side of the head in the phone mode or in front of the face in the two-
way radio mode, then ensure the antenna and the radio product is kept the
following minimum distances from the body when transmitting:
•
•
Phone or Two-way radio mode: one inch (2.5 cm)
Data operation using any data feature with or without an accessory
cable: one inch (2.5 cm)
Antenna Care
Use only the supplied or an approved replacement antenna. Unauthorized
antennas, modifications, or attachments could damage the radio product and
may violate FCC regulations.
DO NOT hold the antenna when the radio product is “IN USE”. Holding the
antenna affects call quality and may cause the radio product to operate at a
higher power level than needed.
www.motorola.com/iden
126
PORTABLE RADIO PRODUCT OPERATION AND EME EXPOSURE
Approved Accessories
For a list of approved Motorola accessories call 1-800-453-0920, or visit our
website at www.mot.com/iden, or look in the accessory section of this manual.
ALL MODELS WITH FCC ID AZ489FT5818 MEET THE GOVERNMENT’S
REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to
exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal
Communications Commission of the U.S. Government. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for the general population. The guidelines
are based on standards that were developed by independent scientific organizations through
periodic and thorough evaluation of scientific studies. The standards include a substantial safety
margin designed to assure the safety of all persons, regardless of age and health.
The exposure standard for wireless mobile phones employs a unit of measurement known as the
Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.* Tests for SAR are
conducted using standard operating positions reviewed by the FCC with the phone transmitting at
its highest certified power level in all tested frequency bands. Although the SAR is determined at
the highest certified power level, the actual SAR level of the phone while operating can be well
below the maximum value. This is because the phone is designed to operate at multiple power
levels so as to use only the power required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Before a phone model is available for sale to the public, it must be tested and certified to the FCC
that is does not exceed the limit established by the government-adopted requirement for safe
exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body)
as required by the FCC for each model. The highest SAR value for this model phone when tested
for use at the ear is 1.4 W/kg and when tested on the body, as described in this user guide, is 0.419
W/kg during voice transmission using Phone Mode and 0.776 W/kg during packet data
transmission. (Body-worn measurements differ among phone models, depending upon available
accessories and FCC requirements.) While there may be differences between the SAR levels of
various phones and at various positions, they all meet the government requirement for safe
exposure.
The FCC has granted an Equipment Authorization for this model phone with all reported SAR
levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this
model phone is on file with the FCC and can be found under the Display Grant section of http://
www.fcc.gov/oet/fccid after searching on FCC ID: AZ489FT5818.
Additional information on Specific Absorption Rates (SAR) can be found on the Cellular
Telecommunications Industry Association (CTIA) web-site at http://www.wow-com.com.
______________________________________
* In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6
watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin
of safety to give additional protection for the public and to account for any variations in
measurements.
127
Electro Magnetic Interference/Compatibility
NOTE:Nearly every electronic device is susceptible to electromagnetic
interference (EMI) if inadequately shielded, designed or
otherwise configured for electromagnetic compatibility.
Facilities
To avoid electromagnetic interference and/or compatibility conflicts, turn off
your radio product in any facility where posted notices instruct you to do so.
Hospitals or health care facilities may be using equipment that is sensitive to
external RF energy.
Aircraft
When instructed to do so, turn off your radio product when on board an aircraft.
Any use of a radio product must be in accordance with applicable regulations
per airline crew instructions.
Medical Devices
Pacemakers
The Health Industry Manufacturers Association recommends that a minimum
separation of 6 inches (15 cm) be maintained between a handheld wireless radio
product and a pacemaker. These recommendations are consistent with those of
the U.S. Food and Drug Administration.
Persons with pacemakers should:
•
ALWAYS keep the radio product more than 6 inches (15 cm) from their
pacemaker when the radio product is turned ON.
•
•
Not carry the radio product in a breast pocket.
Use the ear opposite the pacemaker to minimize the potential for
interference.
•
Turn the radio product OFF immediately if you have any reason to suspect
that interference is taking place.
Hearing Aids
Some digital wireless radio products may interfere with some hearing aids. In
the event of such interference, you may want to consult your hearing aid
manufacturer to discuss alternatives.
Other Medical Devices
If you use any other personal medical device, consult the manufacturer of your
device to determine if it is adequately shielded from RF energy. Your physician
may be able to assist you in obtaining this information.
www.motorola.com/iden
128
Medical Devices
Use While Driving
Check the laws and regulations on the use of radio products in the area where
you drive. Always obey them.
When using the radio product while driving, please:
•
•
•
Give full attention to driving and to the road.
Use hands-free operation, if available.
Pull off the road and park before making or answering a call if driving
conditions so require.
129
!
Operational Warnings
W A R N I N G
For Vehicles with an Air Bag
Do not place a portable radio product in the area over the air bag or in the
air bag deployment area. Air bags inflate with great force. If a portable
radio is placed in the air bag deployment area and the air bag inflates, the
radio product may be propelled with great force and cause serious injury to
occupants of the vehicle.
Potentially Explosive Atmospheres
Turn off your radio product prior to entering any area with a potentially
explosive atmosphere, unless it is a radio product type especially qualified
for use in such areas as “Intrinsically Safe” (for example, Factory Mutual,
CSA, or UL approved). Do not remove, install, or charge batteries in such
areas. Sparks in a potentially explosive atmosphere can cause an explosion
or fire resulting in bodily injury or even death.
NOTE: The areas with potentially explosive atmospheres referred to
above include fueling areas such as below decks on boats, fuel or
chemical transfer or storage facilities, areas where the air
contains chemicals or particles, such as grain, dust or metal
powders, and any other area where you would normally be
advised to turn off your vehicle engine. Areas with potentially
explosive atmospheres are often but not always posted.
Blasting Caps and Areas
To avoid possible interference with blasting operations, turn off your radio
product when you are near electrical blasting caps, in a blasting area, or in
areas posted: “Turn off two-way radio”. Obey all signs and instructions.
www.motorola.com/iden
130
Operational Cautions
!
Operational Cautions
C a u t i o n
Antennas
Do not use any portable radio product that has a damaged antenna. If
a damaged antenna comes into contact with your skin, a minor burn can
result.
Batteries
All batteries can cause property damage and/or bodily injury, such as burns
if a conductive material such as jewelry, keys, or beaded chains touches
exposed terminals. The conductive material may complete an electrical
circuit (short circuit) and become quite hot. Exercise care in handling any
charged battery, particularly when placing it inside a pocket, purse, or other
container with metal objects.
Cleaning and Drying Considerations
Using a leather carry case may help protect the surfaces and help prevent liquids
(e.g., rain) from entering into the interior of the radio product. This product is
not water proof, and exposing the unit to liquids may result in permanent
damage to the unit.
If your radio product interior gets wet, then do not try to accelerate drying with
the use of an oven or a dryer as this will damage the radio product and void the
warranty. Instead, do the following:
1. Immediately power off the radio product.
2. Remove Battery and SIM card (if so equipped) from radio product.
3. Shake excess liquid from radio product.
4. Place the radio product and battery in an area that is at room temperature
and has good air flow.
131
5. Let the radio product, battery dry, and SIM card for 72 hours before
reconnecting the battery and/or powering on the radio product.
If the radio product does not work after following the steps listed above, contact
your dealer for servicing information.
Clean the external surfaces of the radio product with a damp cloth, using a mild
solution of dishwashing detergent and water. Some household cleaners may
contain chemicals that could seriously damage the radio product. Avoid the use
of any petroleum-based solvent cleaners. Also, avoid applying liquids directly
on the radio product.
www.motorola.com/iden
132
Accessory Safety Information
Accessory Safety Information
IMPORTANT:
SAVE THESE ACCESSORY SAFETY INSTRUCTIONS
•
Before using any battery or battery charger, read all the instructions for and
cautionary markings on (1) the battery, (2) the battery charger, which may
include a separate wall-mounted power supply or transformer, and (3) the
radio product using the battery.
•
Do not expose any battery charger to water, rain, or snow as they are
designed for indoor or in-vehicle use only.
To reduce the risk of injury, charge only the
rechargeable batteries listed in the Accessories
section of this manual. Other types of batteries
!
may burst, causing personal injury and damage.
W A R N I N G
•
To reduce the risk of damage to the cord or plug, pull by the plug rather
than the cord when you disconnect the battery charger from the power
source outlet.
•
•
Do not operate any battery charger with a damaged cord or plug — replace
them immediately.
Battery chargers may become warm during operation, but not hot. If it
becomes hot to the touch, unplug it from the power outlet immediately and
discontinue its use.
•
•
•
Use of a non-recommended attachment to a battery charger may result in a
risk of fire, electric shock, or injury to persons.
Make sure the battery charger power cord is located so that it will not be
stepped on, tripped over, or subjected to damage or stress.
An extension cord should not be used with any battery charger unless
absolutely necessary. Use of an improper extension cord could result in a
risk of fire and electric shock. If an extension cord must be used, make sure
that:
•
The pins on the plug of the extension cord are the same number, size,
and shape as those on the plug of the charger.
•
•
The extension cord is properly wired and in good electrical condition.
The cord size is 18AWG for lengths up to 100 feet and 16AWG for
lengths up to 150 feet.
133
•
•
Do not operate any battery charger if it has received a sharp blow, has been
dropped, or has been damaged in any way; take it to a qualified service
technician.
Do not disassemble a battery charger; take it to a qualified service
technician when service or repair is required. Incorrect reassembly may
result in a risk of electric shock or fire.
•
•
•
•
Maximum ambient temperature around the power supply or transformer of
any battery charger should not exceed 40°C (104°F).
The output power from the power supply or transformer must not exceed
the rating given on the Desktop Dual-Pocket Charger.
The disconnection from the line voltage is made by unplugging the power
supply from the AC receptacle.
To reduce risk of electric shock, unplug any battery charger from the outlet
before attempting any maintenance or cleaning.
For optimum charging performance, turn off the radio product while charging it
in any battery charger.
www.motorola.com/iden
134
Limited Warranty Motorola Communication Products
Limited Warranty Motorola Communication
Products
N O T E :
This Warranty applies within the fifty (50) united
states and the District of Columbia
I. WHAT THIS WARRANTY COVERS AND FOR
HOW LONG:
MOTOROLA, INC. (“MOTOROLA”) warrants the MOTOROLA
manufactured iDEN Communication Products listed below (“Product”) against
defects in material and workmanship under normal use and service for a period
of time from the date of purchase as scheduled below:
iDEN Subscriber Digital Mobile and
Portable Units
One (1) Year
Product Accessories
Batteries
One (1) Year
One (1) Year
Rechargeable Batteries will be replaced during the applicable warranty period
if:
a. the battery capacity falls below 80% of rated capacity, or
b. the battery develops leakage.
MOTOROLA, at its option, will at no charge either repair the Product (with new
or reconditioned parts), replace it (with a new or reconditioned Product), or
refund the purchase price of the Product during the warranty period provided it
is returned in accordance with the terms of this warranty. Replaced parts or
boards are warranted for the balance of the original applicable warranty period.
All replaced parts of Product shall become the property of MOTOROLA.
This express limited warranty is extended by MOTOROLA to the original end
user purchaser only and is not assignable or transferable to any other party. This
is the complete warranty for the Product manufactured by MOTOROLA.
MOTOROLA assumes no obligations or liability for additions or modifications
135
to this warranty unless made in writing and signed by an officer of
MOTOROLA. Unless made in a separate agreement between MOTOROLA and
the original end user purchaser, MOTOROLA does not warrant the installation,
maintenance or service of the Product.
MOTOROLA cannot be responsible in any way for any ancillary equipment not
furnished by MOTOROLA which is attached to or used in connection with the
Product, or for operation of the Product with any ancillary equipment, and all
such equipment if expressly excluded from this warranty. Because each system
which may use the Product is unique, MOTOROLA disclaims liability for
range, coverage, or operation of the system as a whole under this warranty.
II. GENERAL PROVISIONS:
This warranty sets forth the full extent of MOTOROLA’S responsibilities
regarding the Product, Repair, replacement or refund of the purchase price, at
MOTOROLA’S options, is the exclusive remedy. THIS WARRANTY IS
GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED
WARRANTIES, INLCUDING WITHOUT LIMITATION, IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS
LIMITED WARRANTY. IN NO EVENT SHALL MOTOROLA BE LIABLE
FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE
PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE,
COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OR OTHER
INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE USE OR INABILITY TO USE SUCH PRODUCT, TO THE
FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW.
III. STATE LAW RIGHTS:
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATION ON
HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE
LIMITATIONS OR EXCLUSIONS MAY NOT APPLY.
This warranty gives specific legal rights, and there may be other rights which
may vary from state to state.
www.motorola.com/iden
136
Limited Warranty Motorola Communication Products
IV. HOW TO GET WARRANTY SERVICE:
You must provide proof of purchase (bearing the date of purchase and Product
item serial number) in order to receive warranty service and, also, deliver or
send the Product item, transportation and insurance prepaid, to an authorized
warranty service location. Warranty service will be provided by MOTOROLA
through one of its authorized warranty service locations. If you first contact the
company which sold you the Product (e.g., dealer or communication service
provider), it can facilitate your obtaining warranty service. You can also call
MOTOROLA at 1-800-453-0920 for warranty service location information.
V. WHAT THIS WARRANTY DOES NOT COVER:
a. Defects or damage resulting from use of the Product in other than its
normal and customary manner.
b. Defects or damage from misuse, accident, water, or neglect.
c. Defects or damage from improper testing, operation, maintenance,
installation, alteration, modification, or adjustment.
d. Breakage or damage to antennas unless caused directly by defects in
material workmanship.
e. A Product subjected to unauthorized Product modifications,
disassemblies or repairs (including, without limitation, the audition to
the Product of non-MOTOROLA supplied equipment) which
adversely affect performance of the Product or interfere with
MOTOROLA’S normal warranty inspection and testing of the
Product to verify any warranty claim.
f. Product which has had the serial number removed or made illegible.
g. Rechargeable batteries if:
1. Any of the seals on the battery enclosure of cells are broken or show
evidence of tampering.
2. The damage or defect is caused by charging or using the battery in
equipment or service other than the Product for which it is specified.
h. Freight costs to the repair depot.
i. A Product which, due to illegal or unauthorized alteration of the
software/firmware in the Product, does not function in accordance
with MOTOROLA’S published specifications or the FCC type
acceptance labeling in effect for the Product at the time the Product
was initially distributed from MOTOROLA.
j. Scratches or other cosmetic damage to Product surfaces that does not
effect the operation of the Product.
k. Normal and customary wear and tear.
137
VI. PATENT AND SOFTWARE PROVISIONS:
MOTOROLA will defend, at its own expense, any suit brought against the end
user purchaser to the extent that it is based on a claim that the Product or parts
infringe a United States patent, and Motorola will pay those costs and damages
finally awarded against the end user purchaser in any such suit which are
attributable to any such claim, but such defense and payments are conditioned
on the following:
a. That MOTOROLA will be notified promptly in writing by such
purchaser of any notice of such claim;
b. That MOTOROLA will have sole control of the defense of such suit
and all negotiations for its settlement or compromise; and
c. Should the Product or parts become, or in MOTOROLA’S opinion be
likely to become, the subject of a claim of infringement of a patent,
that such purchaser will permit MOTOROLA, at its option and
expense, either to procure for such purchaser the right to continue
using the Product or parts or to replace or modify the same so that it
becomes non-infringing or to grant such purchaser a credit for the
Product or parts as depreciated and accept its return. The depreciation
will be an equal amount per year over the lifetime of the Product or
parts as established by MOTOROLA.
MOTOROLA will have no liability with respect to any claim of patent
infringement which is based upon the combination of the Product or parts
furnished hereunder with software, apparatus or devices not furnished by
MOTOROLA, nor will MOTOROLA have any liability for the use of ancillary
equipment or software not furnished by MOTOROLA which is attached to or
used in connection with the Product or any parts thereof.
Laws in the United States and other countries preserve for MOTOROLA certain
exclusive rights for copyrighted MOTOROLA software, such as the exclusive
rights to reproduce in copies and distribute copies of such MOTOROLA
software. MOTOROLA software may be used in only the Product in which the
software was originally embodied and such software in such Product may not be
replaced, copied, distributed, modified in any way, or used to produce any
derivative thereof. No other use including, without limitation, alteration,
modification, reproduction, distribution, or reverse engineering of such
MOTOROLA software or exercise or rights in such MOTOROLA software is
permitted. No license is granted by implication, estoppel or otherwise under
MOTOROLA patent rights or copyrights.
www.motorola.com/iden
138
Limited Warranty Motorola Communication Products (International)
Limited Warranty Motorola Communication
Products (International)
N O T E :
This Warranty applies in Singapore and the
Philippines.
I. WHAT THIS WARRANTY COVERS AND FOR
HOW LONG:
MOTOROLA warrants the MOTOROLA manufactured iDEN Communication
Products listed below (“Product”) against defects in material and workmanship
under normal use and service for a period of time from the date of purchase as
scheduled below:
iDEN Subscriber Digital Mobile and
Portable Units
One (1) Year
One (1) Year
One (1) Year
Product Accessories (manufactured by
or under license from MOTOROLA)
Batteries
Rechargeable Batteries will be replaced during the applicable warranty period
if:
a. the battery capacity falls below 80% of rated capacity, or
b. the battery develops leakage.
MOTOROLA, at its option, will at no charge either repair the Product (with new
or reconditioned parts), replace it (with a new or reconditioned Product), or
refund the purchase price of the Product during the warranty period provided it
is returned in accordance with the terms of this warranty. Replaced parts or
boards are warranted for the balance of the original applicable warranty period.
All replaced parts of Product shall become the property of MOTOROLA.
This express limited warranty is extended by MOTOROLA to the original end
user purchaser only and is not assignable or transferable to any other party. This
is the complete warranty for the Product manufactured by MOTOROLA.
MOTOROLA assumes no obligations or liability for additions or modifications
139
to this warranty unless made in writing and signed by an officer of
MOTOROLA. Unless made in a separate agreement between MOTOROLA and
the original end user purchaser, MOTOROLA does not warrant the installation,
maintenance or service of the Product.
MOTOROLA cannot be responsible in any way for any ancillary equipment not
furnished by MOTOROLA which is attached to or used in connection with the
Product, or for operation of the Product with any ancillary equipment, and all
such equipment if expressly excluded from this warranty. Because each system
which may use the Product is unique, MOTOROLA disclaims liability for
range, coverage, or operation of the system as a whole under this warranty.
II. GENERAL PROVISIONS:
This warranty sets forth the full extent of MOTOROLA’S responsibilities
regarding the Product, Repair, replacement or refund of the purchase price, at
MOTOROLA’S options, is the exclusive remedy. THIS WARRANTY IS
GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED
WARRANTIES, INLCUDING WITHOUT LIMITATION, IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS
LIMITED WARRANTY TO THE FULL EXTENT SUCH MAY BE
DISCLAIMED BY LAW. IN NO EVENT SHALL MOTOROLA BE LIABLE
FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE
PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE,
COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OR OTHER
INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE USE OR INABILITY TO USE SUCH PRODUCT, TO THE
FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW.
III. HOW TO GET WARRANTY SERVICE:
You must provide proof of purchase (bearing the date of purchase and Product
item serial number) in order to receive warranty service and, also, deliver or
send the Product item, transportation and insurance prepaid, to an authorized
warranty service location. Warranty service will be provided by MOTOROLA
through one of its authorized warranty service locations. If you first contact the
company which sold you the Product (e.g., dealer or communication service
provider), it can facilitate your obtaining warranty service.
IV. WHAT THIS WARRANTY DOES NOT COVER:
a. Defects or damage resulting from use of the Product in other than its
normal and customary manner.
www.motorola.com/iden
140
Limited Warranty Motorola Communication Products (International)
b. Defects or damage from misuse, accident, water, or neglect.
c. Defects or damage from improper testing, operation, maintenance,
installation, alteration, modification, or adjustment.
d. Breakage or damage to antennas unless caused directly by defects in
material workmanship.
e. A Product subjected to unauthorized Product modifications,
disassemblies or repairs (including, without limitation, the audition to
the Product of non-MOTOROLA supplied equipment).
f. Product which has had the serial number removed or made illegible.
g. Rechargeable batteries if:
1. Any of the seals on the battery enclosure of cells are broken or
show evidence of tampering.
2. The damage or defect is caused by charging or using the battery in
equipment or service other than the Product for which it is
specified.
h. Freight costs to the repair depot.
i. A Product which, due to illegal or unauthorized alteration of the
software/firmware in the Product, does not function in accordance
with MOTOROLA’S published specifications or the local type
acceptance labeling in effect for the Product at the time the Product
was initially distributed from MOTOROLA.
j. Scratches or other cosmetic damage to Product surfaces that does not
effect the operation of the Product.
k. Normal and customary wear and tear.
l. Exclusion for defects or damage arising from use of the products in
connection with non-MOTOROLA equipment.
V. PATENT AND SOFTWARE PROVISIONS:
MOTOROLA will defend, at its own expense, any suit brought against the end
user purchaser to the extent that it is based on a claim that the Product or parts
infringe a patent, and Motorola will pay those costs and damages finally
awarded against the end user purchaser in any such suit which are attributable to
any such claim, but such defense and payments are conditioned on the
following:
a. That MOTOROLA will be notified promptly in writing by such
purchaser of any notice of such claim;
b. That MOTOROLA will have sole control of the defense of such suit
and all negotiations for its settlement or compromise; and
c. Should the Product or parts become, or in MOTOROLA’S opinion be
likely to become, the subject of a claim of infringement of a patent,
141
that such purchaser will permit MOTOROLA, at its option and
expense, either to procure for such purchaser the right to continue
using the Product or parts or to replace or modify the same so that it
becomes non-infringing or to grant such purchaser a credit for the
Product or parts as depreciated and accept its return. The depreciation
will be an equal amount per year over the lifetime of the Product or
parts as established by MOTOROLA.
MOTOROLA will have no liability with respect to any claim of patent
infringement which is based upon the combination of the Product or parts
furnished hereunder with software, apparatus or devices not furnished by
MOTOROLA, nor will MOTOROLA have any liability for the use of ancillary
equipment or software not furnished by MOTOROLA which is attached to or
sued in connection with the Product or any parts thereof. In no event shall
MOTOROLA be liable for any incidental, special or consequential damages
arising from any claim of patent infringement or alleged infringement.
Laws in the United States and other countries preserve for MOTOROLA certain
exclusive rights for copyrighted MOTOROLA software, such as the exclusive
rights to reproduce in copies and distribute copies of such MOTOROLA
software. MOTOROLA software may be used in only the Product in which the
software was originally embodied and such software in such Product may not be
replaced, copied, distributed, modified in any way, or used to produce any
derivative thereof. No other use including, without limitation, alteration,
modification, reproduction, distribution, or reverse engineering of such
MOTOROLA software or exercise or rights in such MOTOROLA software is
permitted. No license is granted by implication, estoppel or otherwise under
MOTOROLA patent rights or copyrights.
www.motorola.com/iden
142
Patent and Trademark Information
Patent and Trademark Information
MOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are
trademarks of Motorola, Inc. ® Reg. U.S. Pat. & Tm. Off. © 2002 Motorola, Inc. All
rights reserved. Manufactured under one or more of the U.S. patents listed in the User’s
Guide.
Microsoft and, Microsoft WEB Explorer, are registered trademarks of Microsoft
Corporation.
Netscape Navigator is a registered trademark of Netscape Communications Corporation.
T9 is a trademark owned by Tegic Communications.
T9® Text Input Patent and Trademark Information
This product is covered by U.S. Pat. 5,818,437, U.S. Pat. 5,953,541, U.S. Pat. 6,011,554
and other patents pending.
Java and all other Java-based marks are trademarks or registered trademarks of Sun
Microsystems, Inc. in the U.S. and other countries.
Direct Protect is a trademark of Signal Insurance Company.
All other product or service names mentioned in this manual are the property of their
respective trademark owners.
143
www.motorola.com/iden
144
Index
A
Accessories 115
batteries 115
Data cable 87, 119, 120
Dual Port Adapter Cable 120
Travel Charger 116
Contrast 110
Accessory safety information 133
Adapter cable 120
Alert Timeout 112
Alpha mode, text entry 34
Auto Redial 108
Customizing phone 101
B
Backlight 107
Backlight timer 109
Battery 115
attaching 13
charge strength 14
charging 14
detaching 13
operating 116
Battery Charging 14
Baud rate 111
email 87
sending and receiving 86
Emergency Calling 66
Entering text, see Text entry
C
Call Alert Queue 93
Call alerts 91
F
from Phonebook 91
receiving 92
Call Forwarding 76
turning off 78
turning on 77
Call Hold 74
Faceplate
replacing 15
Faxes
sending and receiving 87
G
Call Timers 71, 72
Call Waiting 72, 105
Getting started 11
Group calls 95
145
text and numeric 84
Messages, Net Alert
receiving 86
Messages, text and numeric
viewing 85
Missed call 67
Mute 70
I
Icons
context sensitive 40
main menu 44
Phonebook 48
status 40
In Call Setup 105
Initial Setup 107
Initial SIM PIN number 20
International calls 60, 65
IP Address 32
K
Keypad
replacing 15
Keypad Lock 106
L
Language 34, 110
M
Main menu 45
icons 44
Patent information 143
Pause digit entry 59
Phone
options 44
Making call alerts 91
Making phone calls 61
Making Private calls 89
Master Reset 106
Memo 99
modem 87
off 17
on 17
status 31
adding 99
deleting 100
editing 100
Phone calls 61
ending 67
viewing 99
Menu icon 43
Menus 43, 56
main menu 45
Message Center 81
Messages 81
from Phonebook 62
from Recent Calls list 64
international calls 65
receiving 66
www.motorola.com/iden
146
speed dial 64
Turbo Dial 65
Phone Lock 106
Phone Setup 104
Phonebook 47
Ring styles 103
Safety 125
capacity 52
CompanionPro 48
making call alerts 91
making calls 62
Private calls 89
storing Recent Calls 69
with non-i30sx phones 48
with other i30sx phones 47
Phonebook entries 50
adding 52
128
Scrolling 110
Settings
Initial Setup 107
Phone Setup 104
deleting 59
editing 58
sorting 51
viewing 50
Plus dialing 60
Power button 17
Powering phone on or off 17
Private calls 89
from Phonebook 89
from Recent Calls list 90
making 89
unblocking 22
with other i30sx phones 47
SIM PIN 19, 106
receiving 90
PUK code 22
changing 21
default 20
R
disabling 23
Radio frequency 125
Ready screen 39
Recent Calls 57, 64, 67
deleting 69
enabling 23
entering 20
Speed Dial numbers 48, 55, 64
Status light 31, 109
Status messages 123
Status of connection 31
Symbols mode, text entry 37
details 68
Private calls 90
storing to Phonebook 69
viewing 67
147
T
T9 Text Input 33
also see Text entry
Talkgroups 95
naming 95
Text and numeric messages 84
Text display
area 42
Text entry
Alpha mode 34
Numeric mode 37
Symbols mode 37
Word mode 35
Three-Way Calling 75
Time and date format 107
Trademark information 143
Travel Charger 116
TTY devices 87
making calls 66
setting baud rate 112
setting mode 111
Turbo Dial 65
Turning phone on or off 17
Two-way radio, see Private calls
Typing text, see Text entry
U
Unblocking SIM PIN 22
V
Voice Mail 82
logging in 83
receiving messages 82
transferring calls to 82
Voice Volume 113
W
Warranty 139
www.motorola.com/iden
148
|