Motorola T307 User Manual

Universal Bluetooth®  
Hands-free Speaker  
T307  
T307  
MOTOMANUAL  
Figure 2  
Charging  
Port  
Figure 3  
2
English  
European Union Directives Conformance Statement  
Hereby, Motorola Inc., declares that this T307 is in  
compliance with the essential requirements and other  
relevant provisions of Directive 1999/5/EC.  
You can view your product’s Declaration of Conformity (DoC) to Directive  
Caring for the Environment by Recycling  
When you see this symbol on a Motorola product, do not dispose the  
product with household waste.  
Recycling Mobile Phones and Accessories  
Do not dispose of mobile phones or electrical accessories, such as Do  
not dispose of mobile phones or electrical accessories, such as chargers  
or headsets, with your household waste. In some countries or regions,  
collection systems are set up to handle electrical and electronic waste  
items. Contact your regional authorities for more details. If collection  
systems aren’t available, return unwanted mobile phones or electrical  
accessories to any Motorola Approved Service Centre in your region.  
FCC Notice to Users  
Users are not permitted to make changes or modify the device in any way.  
Changes or modifications not expressly approved by the party responsible for  
compliance could void the user’s authority to operate the equipment.  
This device complies with part 15 of the FCC Rules. Operation is subject to the  
following two conditions: (1) This device may not cause harmful interference,  
and (2) this device must accept any interference received, including  
interference that may cause undesired operation.  
3
English  
a
Initial set up  
Welcome to the world of Motorola digital wireless communications! We  
are pleased that you have chosen the Motorola T307 portable Bluetooth®  
Hands-free Speaker.  
Before you begin  
Take a moment to familiarize yourself with your T307 hands-free speaker.  
See figure 1 on page 1.  
1 Speaker  
2 Multicolor indicator light and Call Button  
3 Volume up (+) button  
4 Volume down (-) button  
5 Power button  
6 Microphone  
Charging your hands-free speaker  
See figure 2 on page 2.  
The indicator light turns steadily red when the battery is charging and the  
hands-free speaker is turned off. It may take up to 1 minute for the indicator  
light to turn on. When the hands-free speaker’s battery is fully charged  
(about 2 hours), the indicator light turns steadily blue.  
Note: Do not place the hands-free speaker with clip installed on visor while  
charging. Hands-free speaker is functional while charging.  
The battery should only be replaced by a Motorola approved  
service facility. ANY ATTEMPT TO REMOVE OR REPLACE YOUR  
BATTERY MAY DAMAGE THE PRODUCT.  
4
English  
Installing the hands-free speaker in your car  
See figure 3 on page 2.  
1. Slide the visor clip onto the mounting bracket on the bottom of the hands-  
free speaker. To do this, place the loop end first onto the hands-free  
speaker and slide forward.  
2. Slide the visor clip on your sun visor.  
When installed, the Power button must be facing toward you.  
The visor clip is reversible to allow placement of your hands-free speaker  
either on the front or the back of your car’s sun visor.  
Adjusting the hands-free speaker volume  
To adjust volume, press and hold either volume button on the side of the  
hands-free speaker.  
Note: hands-free speaker volume cannot be adjusted during an incoming call.  
Pairing your hands-free speaker and phone  
Your phone’s Bluetooth feature is off by default. Make sure the Bluetooth  
feature is turned on in your phone before using your hands-free speaker.  
Please check your phone’s user’s guide.  
Before you can use your hands-free speaker, you must pair (link) it with  
your phone.  
1. Ensure the hands-free speaker is in pairing mode  
To initiate easy pairing, power on the hands-free speaker by pressing and  
holding the Power button until the indicator light becomes steadily lit in  
purple. Then, release the button.  
After a few moments, the indicator light will be steadily lit in blue to indicate  
that the hands-free speaker is in pairing mode. If the hands-free speaker  
does not enter pairing mode, see the Troubleshooting section for help.  
5
English  
2. Set your phone to look for your hands-free speaker  
Perform a device discovery (or scan) from the phone. For details about  
device discovery, consult your phone’s user’s guide. The phone lists  
Bluetooth devices it finds.  
Select Motorola T307 in the list of discovered devices and confirm by  
following the on-screen prompts.  
When prompted by the phone, enter the passkey 0000 and confirm.  
When your hands-free speaker successfully pairs with your phone, the  
indicator light changes to flashing blue with quick purple flashes.  
After you have successfully paired your phone and the hands-free speaker,  
you do not need to repeat these steps each time you use the hands-free  
speaker.  
Test and use  
Your phone and hands-free speaker are now paired and ready to make  
and receive calls. To confirm they are successfully paired and operating  
properly, place the hands-free speaker on your car sun visor and make a call  
from your phone. You will hear ringing from the hands-free speaker.  
6
English  
Using your hands-free speaker  
Turning your hands-free speaker on & off  
To turn your hands-free speaker on, press and hold the Power button until  
the indicator light turns purple. Then, release the button.  
Note: the hands-free speaker may take up to 3-4 seconds to turn on.  
To turn your hands-free speaker off, press and hold the Power button until  
the indicator light turns purple and then turns off.  
To save battery power, your hands-free speaker will turn off when not  
connected to your phone for more than 30 minutes.  
Making and receiving calls  
Your hands-free speaker supports both hands-free and headset profiles.  
Accessing call functions depend upon which profile your phone supports.  
See your phone’s user’s guide for more information.  
Note: Some features are phone/network dependent.  
Function  
Action  
Receive a call  
End a call  
Tap the Call button  
Tap the Call button – If a call is on hold, tap  
twice to end all calls  
Reject a call  
Tap either volume button  
Redial last call  
Press and hold the Call button until you hear a beep  
Make a voice dial call  
Tap the Call button and speak the name  
after the tone  
Answer a second incoming call  
Press and hold the Call button until you hear  
a beep (The 1st call is placed on hold)  
Toggle between two active calls  
Mute or un-mute a call  
Press and hold the Call button  
Tap both Volume buttons  
Note: when turning on your hands-free speaker during a phone call, audio  
is transferred automatically to your hands-free speaker (provided that your  
hands-free speaker and phone have previously been connected and your  
phone supports this feature).  
7
English  
Indicator lights  
With the charger plugged in:  
Indicator  
Status  
Steady red  
Steady blue  
Charge in progress  
Charging complete  
Note: Charging status is not displayed when hands-free speaker is in use.  
With no charger plugged in:  
Indicator  
Status  
Off  
Power off  
Steady purple  
Steady blue  
Quick red flash  
Blue with rapid purple flashes  
Slow blue pulse  
Blue flash  
Powering up  
Pairing mode  
Low battery  
Successful pairing  
Connected (on a call)  
Standby (not on a call)  
Incoming call  
Muted  
Quick blue flash  
Slow purple pulse  
Audio tones  
Audio tone  
Status  
Single high tone when pressing volume button  
5 rapid high tones repeated every 60 seconds  
No audio indications: deteriorating quality  
Ring tone  
Volume at minimum or maximum  
Low battery  
Out of range  
Incoming call  
Single high tone  
Single low tone  
Dual high/low tone (phone dependent)  
Single high tone  
Pairing confirmation  
Voice activation  
Voice tag not recognized  
End call  
Low to high tone  
2 ascending tones  
Phone network not available  
Mute enabled  
2 descending tones  
Mute disabled  
8
English  
Troubleshooting  
My hands-free speaker will not enter pairing mode: make sure that any  
devices previously paired with the hands-free speaker are turned off. If the  
indicator light is flashing in blue, turn off the other device and wait for 10  
seconds. The indicator light becomes steadily lit in blue indicating that the  
hands-free speaker is now in pairing mode.  
My phone does not find my hands-free speaker: make sure the indicator  
light on your hands-free speaker is steadily lit when you phone is searching  
for devices.  
My hands-free speaker worked before but now it is not working: Make sure  
the Bluetooth feature is turned on in your phone. If the Bluetooth feature  
has been turned off or was turned on temporarily, you may need to restart  
the Bluetooth feature and pair your phone and hands-free speaker again.  
If you have any additional questions, please call your hotline number  
9
motorola.com  
MOTOROLA and the Stylized M Logo are registered in the US Patent &  
Trademark Office. All other product or service names are the property of  
their respective owners. The Bluetooth trademark and logos are owned by  
the Bluetooth SIG, Inc. and any use of such marks by Motorola, Inc. is under  
license. © 2007 Motorola, Inc. All rights reserved.  
6803578F61 - Printed in the EU.  

Mr Coffee NLX20 User Manual
Mr Coffee Coffeemaker BVMC KG2 User Manual
LG Electronics TE365F User Manual
LG Electronics LG Lifes Good Cell Phone LX140 User Manual
Jabra Cell Phone V3I User Manual
IBM 73P4518 User Manual
Dell DL4000 User Manual
Black & Decker DCM7 User Manual
Apex Digital AB 202 User Manual
Aiwa CX NMT50 User Manual