Motorola NNTN7983A User Manual

User Guide  
MOTOROLA i890  
www.nextel.com  
©2010 Sprint. SPRINT and the NEXTEL name and logo are trademarks  
of Sprint. Other marks are the property of their respective owners.  
1/12/10  
FCC Notice to Users  
DECLARATION OF CONFORMITY  
The following statement applies to all products that have  
received FCC approval. Applicable products bear the FCC  
logo, and/or an FCC ID in the format FCC-ID: IHDT56KQ1 on  
the product label.  
Per FCC CFR 47 Part 2 Section 2.1077(a)  
Motorola has not approved any changes or modifications to  
this device by the user. Any changes or modifications could  
void the user’s authority to operate the equipment. See 47 CFR  
Sec. 15.21.  
Class B Digital Device  
Responsible Party Name: Motorola, Inc.  
As a personal computer peripheral, this device complies with  
part 15 of the FCC Rules. Operation is subject to the following  
two conditions: (1) This device may not cause harmful  
interference, and (2) this device must accept any interference  
received, including interference that may cause undesired  
operation. See 47 CFR Sec. 15.19(3).  
Address: 8000 West Sunrise Boulevard  
Plantation, FL 33322 USA  
Phone Number: 1 (800) 453-0920  
Hereby declares that the product:  
Product Name: i890  
Model Number: H75XAH6JS5AN  
FCC-ID: IHDT56KQ1  
Conforms to the following regulations:  
FCC Part 15, subpart B, section 15.107(a), 15.107(d) and section  
15.109(a)  
Note: This equipment has been tested and found to comply  
with the limits for a Class B digital device, pursuant to  
part 15 of the FCC Rules. These limits are designed to  
provide reasonable protection against harmful  
interference in a residential installation. This equipment  
generates, uses and can radiate radio frequency  
energy and, if not installed and used in accordance  
with the instructions, may cause harmful interference to  
radio communications. However, there is no guarantee  
that interference will not occur in a particular installation.  
If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the  
equipment off and on, the user is encouraged to try to correct  
the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and  
receiver.  
Connect the equipment into an outlet on a circuit  
different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV  
technician for help.  
Table of Contents  
Maintaining Safe Use of and Access to Your  
Motorola Limited Warranty  
Introduction  
Note: Because of updates in phone software, this printed  
guide may not be the most current version for your  
phone. Visit www.nextel.com and sign in to access the  
most recent version of the user guide.  
This User Guide introduces you to your wireless service  
and all the features of your new phone.  
WARNING: Please refer to the Important Safety Information  
section on page 156 to learn about information  
that will help you safely use your phone. Failure to  
read and follow the Important Safety Information  
in this phone guide may result in serious bodily  
injury, death, or property damage.  
Throughout this guide, you’ll find tips that highlight  
special shortcuts and timely reminders to help you  
make the most of your new phone and service. The  
Table of Contents and Index will also help you quickly  
locate specific information.  
You’ll get the most out of your phone if you read each  
section. However, if you’d like to get right to a specific  
feature, simply locate that section in the Table of  
Contents and go directly to that page. Follow the  
instructions in that section, and you’ll be ready to use  
your phone in no time.  
i
 
Use and Care  
To care for your Motorola phone, keep it away from:  
liquids of any kind  
dust and dirt  
Don’t expose your phone to water, rain,  
extreme humidity, sweat, or other  
moisture.  
Don’t expose your phone to dust, dirt,  
sand, food, or other inappropriate  
materials.  
extreme heat or cold  
cleaning solutions  
Avoid temperatures below -10°C/14°F or  
above 45°C/113°F.  
To clean your phone, use only a dry soft  
cloth. Don’t use alcohol or other  
cleaning solutions.  
microwaves  
the ground  
Don’t try to dry your phone in a  
microwave oven.  
Don’t drop your phone.  
ii  
 
Setting Up Your Phone  
1. Setting Up Service  
1. Make sure your SIM card is in place.  
2. Install the battery.  
3. Press and hold the End/Power Key (@) for two  
seconds to turn the phone on.  
If your phone is activated, it will turn on, search for  
service, and enter standby mode.  
If your phone's SIM PIN is set, you may be  
prompted to enter your SIM PIN code when  
you turn on your phone. Enter the four-digit  
number and press the left softkey (the top left  
key below the display screen) to select Ok.  
Press Yes (left softkey) to allow phone  
Your Phone’s Navigation Pad  
Softkeys (:)  
(;) Navigation Key  
transmissions as prompted. (See “SIM Card  
Menu Key (/)  
(q) Web Key  
Talk Key (`)  
(@) End/Power Key  
If your phone is not yet activated, see “Activating  
Your Phone” on page 2 for more information.  
(r) OK Key  
Note: You may see a prompt to update your browser  
information. Press Ok (left softkey) to complete the task.  
1
   
4. Make your first call.  
prompts showing what to do next. If you still  
encounter security messages, call Nextel Customer  
Service at 1-800-639-6111 from any other phone.  
Use your keypad to enter a phone number.  
Press the Talk key (`).  
Note: Your phone’s battery should have enough charge for  
your phone to turn on and find a signal, set up your  
voicemail, and make a call. You should fully charge  
your battery as soon as possible. See “Charging the  
Battery” on page 13 for details.  
Setting Up Voicemail  
All unanswered calls to your phone are automatically  
transferred to your voicemail, even if your phone is in  
use or turned off. Therefore, it is recommended that you  
set up your voicemail and personal greeting as soon  
as your phone is activated.  
Activating Your Phone  
1. Using your i890 phone, call your wireless phone  
number.  
If you purchased your phone at a Nextel Store, it is  
probably activated and ready to use.  
2. Follow the system prompts to:  
Create your passcode.  
If your phone is not activated, please call Nextel  
Customer Service at 1-800-639-6111 from any other  
phone.  
Record your name announcement.  
Record your greeting.  
Tip: You must be in an area covered by the Nextel National  
Network when you first power up your phone.  
Note: Voicemail Passcode: It is strongly recommended that  
you create a passcode when setting up your voicemail  
to protect against unauthorized access. Without a  
passcode, anyone who has access to your phone is  
able to access your voicemail messages.  
When you power up your phone the first time, it  
performs a series of security checks. For example, it  
verifies the phone is Nextel-approved and the correct  
SIM card is installed. If you don’t pass the security  
checks, your phone displays messages and screen  
2
       
For more information about using your voicemail, (see  
Account Passwords  
With Nextel service, you enjoy unlimited access to your  
personal account information and voicemail account.  
To ensure that no one else has access to your  
information, you need to create passwords to protect  
your privacy.  
Enabling Security  
You must enable security the first time you power on  
your phone or within ten days of first activating your  
phone.  
Account Username and Password  
1. Press and hold @for two seconds to power on  
your phone.  
If you are the account owner, you will create an account  
username and password when you sign on to  
www.nextel.com. (Click Need to register for access? to get  
started.) If you are not the account owner (if someone  
else receives the bill for your service), you can get a  
sub-account password at www.nextel.com.  
2. Press Ok (right softkey).  
3. You are prompted to enable security. Press Yes  
(right softkey). A series of screens followed by the  
default homepage displays.  
Note: When you go to www.nextel.com, you will be redirected  
to www.sprint.com by default. Follow the sign in  
4. Press @to return to standby mode.  
instructions above to access your Nextel account.  
Voicemail Password  
You will create your voicemail password (or passcode)  
when you set up your voicemail. See “Setting Up  
Voicemail” on page 2 for more information on your  
voicemail password.  
3
     
Operator Services  
Getting Help  
Operator Services provides assistance when you place  
collect calls or when you place calls billed to a local  
telephone calling card or third party.  
Managing Your Account  
Online: www.nextel.com  
Press  
0`.  
Access your account information.  
For more information or to see the latest in products  
and services, visit us online at www.nextel.com.  
Check your minutes used (depending on your  
service plan).  
View and pay your bill.  
Enroll for online billing and automatic payment.  
Purchase accessories.  
Shop for the latest phones.  
View available service plans and options.  
From Your i890 Phone  
Press *4  
`
to check minute usage and account  
balance.  
Press *3  
`
to make a payment.  
From Any Other Phone  
Nextel Customer Service: 1-800-639-6111.  
Business Customer Service: 1-877-639-8351.  
4
   
Your Phone  
2. Phone Basics  
Open View  
10. Navigation Key  
1. Left Softkey  
9. Right Softkey  
8. Web Key  
7. End/Power Key  
2. Menu Key  
3. OK Key  
4. Talk Key  
6. Space Key  
5. Back Key  
5
     
3. OK Key (r) selects the highlighted choice when  
navigating through a menu.  
Closed View  
4. Talk Key (`) allows you to place or receive calls,  
answer Call Waiting, or use Three-Way Calling.  
11. Speaker  
Button  
19. Smart  
Button  
18. Phone Release  
Button  
5. Back Key (*) deletes characters in text entry  
mode. When using the Web, it allows you to return  
to the previous page.  
17. External Button  
Lock  
12. Volume  
Button  
6. Space Key (#) enters a space in text entry mode.  
16. Touch Exit  
Key  
13. Direct  
Connect  
7. End/Power Key (@) allows you to end calls, return  
to standby mode, or turn the phone on or off.  
(DC) Button  
15. Micro USB  
Connector  
8. Web Key (L) launches the Web browser.  
14. Touch Media  
Keys  
9. Right Softkey (:) lets you select softkey actions  
corresponding to the bottom right line on the  
display screen.  
10. Navigation Key scrolls through the phone’s menu  
options and acts as a shortcut key from standby  
mode.  
Key Functions  
1. Left Softkey (-) lets you select softkey actions or  
menu items corresponding to the bottom left line  
on the display screen.  
11. Speaker Button ()) lets you place or receive calls  
in speaker mode. In standby mode, pressing the  
speaker button turns Direct Connect speaker  
mode on and off.  
2. Menu Key (/) lets you access the phone’s menu  
from standby mode and allows you to access  
context-sensitive menus from other screens.  
6
 
12. Volume Button allows you to adjust the ringer  
volume in standby mode, the voice or speaker  
volume during a call, and the speaker volume  
while using the music player or other applications.  
Note: The use of wireless phones while driving may cause  
distraction. Discontinue a call if you can’t concentrate  
on driving. Additionally, the use of wireless devices and  
their accessories may be prohibited or restricted in  
certain areas. Always obey the laws and regulations on  
the use of these products.  
13. Direct Connect (DC) Button allows you to use Nextel  
Direct Connect®. (See page 29.)  
14. Touch Media Keys are multipurpose keys that allow  
you to control applications and phone functions  
while the phone is closed.  
Touch Media Keys  
Your i890 phone features three lighted touch controls,  
called touch media keys, located below the external  
display on the front of the phone. These keys let you  
access Recent Calls, your phone’s camera, camcorder,  
music, and media features, and the suspended  
applications list. Pressing the Smart Button activates  
the touch media menu and keys. (You can also activate  
them by launching the camera, camcorder, or music  
player and then closing the phone.)  
15. Micro USB Connector allows you to connect your  
charger or other accessories to your phone.  
16. Touch Exit Key allows you to exit applications and  
phone functions when the phone is closed.  
17. External Button Lock disables all external buttons,  
including the touch media keys.  
18. Phone Release Button opens the phone.  
The function of these keys will change depending on  
the active application. The icons representing the keys’  
current functions are shown on the external display.  
19. Smart Button (() opens and closes the external  
display menu and activates the touch media keys.  
You can also use the Smart Button to end calls  
when your phone is closed.  
7
 
Using the Touch Media Keys  
Multifunction Touch Key (select)  
Next/Forward  
@
K
V
1. Press the Smart Button with the phone closed to  
activate the touch media keys and the external  
display menu.  
Exit (located on lower left side)  
2. Press the left or right touch media key to scroll  
through the menu.  
Indicates you’re in camera mode (not an action  
key)  
,
3. Press the center touch media key (@) to select the  
highlighted item (for example, My Music to launch  
the music player).  
Indicates you’re in camcorder mode (not an  
action key)  
`
4. Touch the keys as indicated to select a function.  
Music actions  
Note: The music player uses a vertical screen.  
Camera/Camcorder actions  
Play/Pause Song  
X
Note: All Camera, Camcorder, My Images, and My Videos  
menus use a horizontal screen. Hold the phone on its  
side with the touch media keys on the right.  
Previous Song/Rewind  
W
Multifunction Touch Key (select)  
Zoom in  
@
Z
Next Song/Fast Forward  
Zoom out  
Y
[
Exit (located on upper left side)  
Play/Pause  
V
X
Previous/Rewind  
J
8
Your SIM Card  
Tip: To exit a menu, press the Smart Button.  
Locating the SIM Card  
During music playback, press the Smart Button to access  
alternate music menus (for example, Songs, Playlists,  
Albums, Artists, and Genres). Use the left and right touch  
media keys to scroll up and down, and press the center  
touch media key to select an option.  
Your SIM (Subscriber Identity Module) card is a small  
card inserted into the SIM card holder within your  
phone below the battery.  
If no SIM card came with your phone, contact Nextel  
Customer Service at 1-800-639-6111.  
Getting Started With Your Phone  
Most users will never need to remove or insert the SIM  
card. However, if it becomes necessary, follow the  
To start using your i890 phone:  
Make sure your SIM card is in place.  
Charge the battery.  
Important: The SIM card is designed for optimal Contacts  
storage and feature use. For Nextel SIM card  
compatibility information, visit  
Turn on your phone.  
After you’ve completed these items, you are ready to  
begin using your new phone.  
In some cases, Contacts and Groups may not be  
accessible if you move your SIM card to another  
phone. Contacts and Groups created with your  
i890 phone may not be readable by an older  
iDEN SIM-based phone.  
9
   
Removing and Inserting the SIM Card  
Note: Protect your SIM card as you would any delicate object.  
Store it carefully.  
Important: To avoid losing information stored in your SIM  
card, do not remove it from your phone unless  
absolutely necessary.  
To insert your SIM card:  
1. With your phone powered off, use your thumbs to  
slide the battery cover up until it is released from  
the phone, and then remove the battery cover from  
the back of the phone.  
To remove your SIM card:  
1. With your phone powered off, use your thumbs to  
slide the battery cover up until it is released from  
the phone, and then remove the battery cover from  
the back of the phone.  
2. Remove the battery, and then use your thumbs to  
carefully slide the SIM card into your phone until it  
lies flat in the SIM card holder.  
2. Remove the battery, and then use your thumbs to  
carefully slide the SIM card out from under the  
edge.  
Important: Do not touch the gold-colored areas of your SIM  
card.  
10  
   
Battery and Charger  
Note: Long backlight settings, searching for service, vibrate  
mode, browser use, and other variables may reduce  
the battery’s talk and standby times.  
WARNING: Use only Nextel-approved or Motorola-approved  
batteries and chargers with your phone. The  
failure to use a Nextel-approved or Motorola-  
approved battery and charger may increase the  
risk that your phone will overheat, catch fire, or  
explode, resulting in serious bodily injury, death,  
or property damage.  
Tip: Watch your phone’s battery level indicator and charge the  
battery before it runs out of power.  
Important: For information on battery safety, see “Battery Use  
Nextel-approved and Motorola-approved batteries and  
accessories can be found at Sprint Stores or through  
Motorola. You may order online at www.nextel.com or by  
calling 1-866-866-7509.  
Your phone’s Lithium Ion (Li-Ion) battery allows you to  
recharge it before it is fully drained.  
When the battery reaches 5% of its capacity, your  
phone makes a sound and displays a message. When  
there are approximately two minutes of talk time left, the  
phone sounds an audible alert and then turns off.  
11  
 
2. Remove the battery door.  
Installing the Battery  
1. Use your thumbs to slide the battery door up until it  
is released from the phone.  
3. Insert the battery into the opening, making sure the  
connectors align. Gently press down to secure the  
battery.  
12  
 
4. Replace the battery door, sliding it down toward  
the base of the phone while pressing gently, until  
you hear a click.  
Using the Phone Charger  
Plug the flat end of the charger into the phone’s  
micro USB connector and the other end into an  
electrical outlet.  
Removing the Battery  
1. Make sure the power is off so that you don’t lose  
any stored numbers or messages.  
2. Remove the battery cover and position your  
fingernail on the top end of the battery to remove it.  
With the approved Li-Ion battery, you can recharge the  
battery before it becomes completely run down.  
WARNING: Do not handle a damaged or leaking Li-Ion  
battery as you can be burned.  
Turning Your Phone On and Off  
Charging the Battery  
Charge your battery as soon as possible so you can  
begin using your phone.  
Turning Your Phone On  
Press and hold @for approximately two seconds.  
Always use a Nextel-approved or Motorola-approved  
desktop charger, travel charger, or vehicle power  
adapter to charge your battery.  
As your phone connects to the network, you see a  
connecting message. Your phone may require you to  
13  
         
enter identifying information to use it or to access  
specific features.  
Battery Strength — A fuller battery indicates a  
greater charge. The “plug” icon (bottom rows)  
indicates the phone is charging.  
d e  
f g  
y x  
w h  
Note: If your phone's SIM PIN is set, you will be prompted to  
enter your SIM PIN code when you turn on your phone.  
Enter the four-digit number and press Ok (left softkey).  
Press Yes (left softkey) to allow phone transmissions as  
prompted.  
Signal Strength — More bars next to the  
antenna indicate a stronger signal.  
z {  
|}  
Turning Your Phone Off  
No Service — Your phone is without service.  
You cannot make or receive any type of call.  
~
$
0
t
4
r
Press and hold @for two seconds until you see  
the powering down animation on the display  
screen.  
Phone In Use — Your phone is active on a  
phone call.  
Your screen remains blank while your phone is off  
(unless the battery is charging).  
Direct Connect In Use — Your phone is active  
on a Direct Connect call.  
Viewing Status Information  
Group In Use — Your phone is active on a  
Group Connect call.  
Your phone’s display screen provides information  
about your phone’s status and options. This list  
identifies the symbols you’ll see on your phone’s  
display screen:  
Direct Talk — Your phone is off network and set  
to Direct Talk mode.  
Talkgroup In Use — Your phone is active on a  
Talkgroup call.  
14  
   
Bluetooth In Use — Your phone is using  
Bluetooth. If this icon is blinking, your phone is  
in discoverable mode. If this icon is static, a  
Bluetooth connection is active.  
Text Input — You are using one of the phone’s  
c
QRS  
WX  
Active Phone Line — 1 indicates phone line 1  
is ready to make calls; 2 indicates phone line 2  
is ready to make calls.  
%'  
Internet — You are ready to browse the Internet  
or are browsing the Internet using a secure  
7 >  
?
Call Forward — Your phone is set to forward  
&)  
;(  
Transmitters — Your phone is set not to receive  
calls and other transmissions. See “Airplane  
L
*<  
TTY — You are ready to use your phone to  
make calls using a TTY (text telephone) device.  
AB  
Ringer Off — Your phone is set to not ring. See  
/5  
,
Speaker Off — Direct Connect sound is set to  
come through the earpiece rather than through  
the speaker.  
Hearing Aid — Your phone is set for use with a  
hearing aid and is active on a phone call. See  
"
W
Messages — You have one or more messages.  
2 6  
1 3  
5
Voice Record — You have one or more voice  
:
15  
3. Select Inbox by highlighting it and pressing r.  
(If you have any MMS messages, they are  
displayed.)  
Navigating Through Menus and  
Options  
Note: For the purposes of this guide, the above steps  
Press /to access the main menu, and then use  
condense into “Press /> Messages > Inbox.”  
the navigation key to scroll through menu items.  
Backing Up Within a Menu  
To navigate through a list-type menu, simply press your  
navigation key up or down. The scroll bar at the right of  
the menu keeps track of your position in the menu at  
all times.  
To go to the previous menu:  
Press Back (right softkey) (when available).  
To return to standby mode:  
Press @.  
Many features provide context-sensitive menus that let  
you access related features and actions. This icon f  
appears onscreen any time a context-sensitive menu is  
available. Press /to access the menu.  
Shortcuts and Personalized Keys  
In standby mode, your phone gives you ways to quickly  
access features you use frequently:  
Selecting Menu Items  
As you navigate through the menu, menu options are  
highlighted. Select an item by highlighting it and  
pressing r.  
Use the Shortcuts feature (page 83) to quickly  
access most menu options by pressing a number on  
your keypad or saying the voice name of the  
shortcut.  
For example, to view your text messages:  
Use the Personalize feature (page 85) to assign main  
menu items to the up and down navigation keys, and  
1. Press /to access the main menu.  
2. Select Messages by highlighting Messages and  
pressing r.  
16  
     
the softkeys, reorder the main menu, and set a main  
menu item to appear when you turn on your phone.  
enter text (for example, when adding a Contacts entry  
or when composing text and multimedia messages).  
To choose a text input mode:  
Help  
1. At a screen requiring you to enter text, press /to  
Your phone contains an in-device help program to  
help you understand complicated or seldom used  
features. When you access a feature, Help sometimes  
appears as a menu item or softkey. Select Help and  
read the text for a quick overview of the feature. For  
more information, refer to this guide.  
change the text input mode.  
2. Select one of the following options:  
Alpha to enter text directly using the keypad.  
Word to enter text using a predictive text system  
that reduces the number of key presses required  
while entering a word. (See page 18.)  
Displaying Your Numbers  
Symbols to enter punctuation and other symbols.  
My Info lets you view your phone number, Direct  
Connect number, and other phone information.  
Numeric to enter numbers by pressing the  
numbers on the keypad. (See page 19.)  
Press /> Tools > My Info.  
Text Input Settings allows you to change the  
settings for text input mode. (See page 18.)  
Entering Text  
Insert to insert Quick Notes preset messages  
(Insert QNotes) or additional multimedia elements  
such as pictures or audio files into a message.  
(See page 55.) (You can also access Quick Notes  
by pressing QNotes [left softkey] when beginning  
a message.)  
Selecting a Text Input Mode  
Your phone provides convenient ways to enter letters,  
numbers, and symbols whenever you are prompted to  
17  
                   
the database. Repeat until the desired word  
appears.  
Tip: When entering text, press and hold the #to change  
letter capitalization (ABC > Abc > abc).  
Adding a Word to the Database  
Entering Text Using Word Text Input  
If a specific word is not displayed as an option when  
you are using Word, add it to the database.  
Word Text Input (T9) reduces the number of keystrokes  
needed to enter a word by predicting complete words  
as you type. While you enter letters, Word mode  
matches your keystrokes to words in its database and  
displays the most commonly used matching word. You  
can add your own words to this database.  
1. Select the Alpha text input mode. (See “Selecting a  
2. Enter the word. (See “Entering Text Using Alpha  
3. Select the Word text input mode.  
1. Select the Word text input mode.  
The word will appear as an option the next time you  
scroll through options during Word Text Input.  
2. Press the corresponding keys once per letter to  
enter a word. (For example, to enter the word “Bill,”  
press 2455.) (If you make a mistake, press  
Delete [left softkey] to erase a single character.  
Press and hold Delete [left softkey] to erase an  
entire entry.)  
Tip: You cannot store alphanumeric combinations such  
as Y2K.  
To change the text input settings:  
1. On a text entry screen, press /.  
2. Select Text Input Settings.  
3. To accept a word and insert a space, press #.  
4. If the word that appears is not the desired word,  
press the navigation key up or down to change the  
word on the display to the next most likely word in  
3. Select your Primary Input and Secondary Input  
language, and whether you want Complete Word  
and Word Predict features to be on or off.  
18  
       
Characters scroll in the following order:  
Entering Text Using Alpha Mode  
English Sequence  
Space . 1 ? ! , @ & : ; “ - ( ) ‘ ¿ ¡ % £ $ ¥  
A B C 2 Á Ã Â À Ç  
D E F 3 É Ê È  
G H I 4 Í Ì  
J K L 5  
M N O 6 ñ Ó Õ Ô Ò  
P Q R S 7 ß  
T U V 8 Ú Ü Û Ù  
Key  
1. Select the Alpha mode. (See “Selecting a Text Input  
ABC  
DEF  
2. Press the corresponding keys repeatedly until the  
correct letter appears. (For example, to enter the  
word “Bill,” press 2twice, 4three times, 5  
three times, and 5three times again. (If you make  
a mistake, press Delete [left softkey] to erase a  
single character. Press and hold Delete [left  
softkey] to erase an entire entry.)  
GHI  
JKL  
MNO  
PQRS  
TUV  
WXYZ  
By default, the first letter of an entry is capitalized and  
the following letters are lower cased. After a character  
is entered, the cursor automatically advances to the  
next space after two seconds or when you enter a  
character on a different key.  
WXY Z 9  
+ - 0 * / \ [ ] = > < # §  
Space Shift Caps Lock  
Back  
Entering Symbols, Numbers, and Quick  
Notes  
To enter symbols:  
Select the Symbols mode. (See “Selecting a Text  
Input Mode” on page 17.) To enter a symbol,  
highlight it and press ror press the number  
19  
         
corresponding to the symbol on the onscreen  
chart.  
Spaces  
Press #to enter a space.  
Capitalization  
To enter numbers:  
Select the Numeric mode and press the  
When you press and hold the #key, it acts as a  
three-way toggle. Press and hold #to make the next  
letter typed uppercase (shift), to make all subsequent  
letters typed uppercase (caps lock), or to go back to  
lowercase letters.  
To enter Quick Notes:  
1. From a text entry screen, press QNotes (left  
softkey).  
These icons appear:  
2. highlight a message and press r.  
Shift is on.  
Ror U  
Sor V  
Tip: To add a quick note after you have already started  
entering a message, press /> Insert > Insert QNotes,  
and select a message.  
Caps lock is on.  
When none of these icons appear, letters typed are  
lowercase. Scrolling up or down after typing a letter in  
Alpha mode changes the case of the letter (uppercase  
or lowercase).  
Note: Quick Notes preset messages make composing text  
messages easier by allowing you to enter quick  
messages, such as “Meet me at,” “Let’s get lunch,” or a  
customized message of your own.  
Note: When creating a text message, you may not be able to  
make a letter uppercase by scrolling up, depending on  
the type of text message and the text entry mode.  
Special Function Keys  
Some of the phone’s keys assume different functions  
while in Alpha or Word mode.  
20  
 
Your phone automatically makes the first letter of a  
sentence uppercase.  
Using a Remote Direct Connect Button  
If you are using a headset or other optional accessory  
with a remote Direct Connect button, you can use the  
remote Direct Connect button for phone calls, Direct  
Connect calls, and Group Connect calls.  
Punctuation  
Press 1or 0to insert punctuation. Continue to press  
the key to view the list of symbols available through that  
key. Pause to select a symbol.  
For phone calls, use the remote Direct Connect button  
to answer calls, switch between calls, and end calls.  
Hold the remote Direct Connect button for less than  
two seconds to answer calls and switch between calls.  
Hold the remote Direct Connect button for more than  
two seconds to end calls.  
Note: Additional punctuation symbols are available in  
Symbols mode.  
Accessories  
For Direct Connect calls and Group Connect calls, use  
the remote Direct Connect button as you would the  
Direct Connect button on your phone.  
Your i890 phone comes with the following accessories:  
A Li-Ion battery and charger.  
A128K SIM card.  
When using a headset, the Direct Connect button on  
your phone works the same way as when you are not  
using a headset. Direct Connect and Group Connect  
sounds will be heard through the headset.  
Various accessories are available for use with your i890  
phone, including cases, vehicle power chargers, data  
cables, hands-free accessories, and more.  
To order additional accessories, go to www.nextel.com  
or call1-866-866-7509. You can also contact your  
Nextel Authorized Representative or stop by any Sprint  
Store. For information on Sprint Store locations, go to  
21  
           
Digital Wireless Phone Calls offer clear calls and other  
services, such as missed call notification, Three-Way  
Calling, speakerphone, and speed dialing (page 23).  
3. Making and Answering  
Calls  
Direct Connect Calls allow two-way radio  
communication with another Direct Connect user  
within the Nextel National Network (page 29).  
Group Connect Calls allow coast-to-coast two-way  
radio calling to up to 20 Nextel Direct Connect  
customers simultaneously (page 31).  
Nextel Direct Send allows you to send contact  
information in Direct Connect and Group Connect  
calls and send pictures in Direct Connect calls  
Talkgroup Calls allow two-way radio calling to up to  
100 Nextel Talkgroup customers simultaneously  
Types of Calls  
Note: To learn more about the differences between Nextel  
Group Connect calls and Talkgroup calls, please see  
With the Nextel National Network, Nextel Direct  
Connect, and your i890 phone, you have the following  
traditional wireless phone and Nextel Direct Connect  
services available to you:  
Nextel Direct Talk allows for two-way radio  
communication “off the network” between two or  
22  
   
more phones equipped with this capability  
Answering Calls  
1. Make sure your phone is on.  
Phone Calls  
Note: When your phone is off, calls go directly to voicemail.  
2. Press `to answer an incoming call.  
Making Calls  
Depending on your settings, you may also answer  
incoming calls by opening the phone or pressing any  
information.  
Placing a traditional wireless phone call from your i890  
phone is as easy as making a call from any landline  
phone.  
Tip: When the phone is closed, you can answer a call by  
pressing the speaker button ()) on the top of the phone.  
To set the phone to answer and end calls by opening  
and closing the phone, press /> Settings >  
Phone Calls > Flip Activation and set Flip To Ans and  
Flip To End to On.  
1. Make sure your phone is on.  
2. Enter a phone number from standby mode and  
press `. (If you make a mistake while dialing,  
press Delete [right softkey] to erase the numbers.)  
3. Press @when you are finished.  
Your phone notifies you of incoming calls by any  
combination of ringing or vibrating, the indicator light  
flashing, the backlight illuminating, or the screen  
displaying an incoming call message.  
Tip: To redial your last outgoing call, press and hold ,.  
You can also place calls from your phone by using  
Voice Names (page 28), speed dialing numbers from  
your Contacts (page 28), and using your Recent Call  
list (page 28).  
If the incoming call is from a number stored in your  
Contacts, the entry’s name is displayed. The caller’s  
phone number may also be displayed, if available.  
23  
       
Ending a Call  
Emergency Calls  
To end a call, press @or close the phone.  
Your phone supports emergency calling. Emergency  
phone calls can be made even when your SIM card is  
blocked or not in your phone.  
Missed Phone Calls  
Missed phone calls are forwarded to voicemail. When  
you do not answer an incoming call, you will see a  
Missed Call notification.  
Dial 911and press `to be connected to an  
emergency response center. If you are on an active  
call, you must end it before calling 911.  
To display a Missed Call entry from the notification screen:  
When you make an emergency call, your phone’s GPS  
Enabled feature can help emergency service  
personnel find you, if you are in a location where your  
phone's GPS antenna has established a clear view of  
the open sky and your local emergency response  
center has the equipment to process location  
information. See “GPS Enabled” on page 114, and  
page 115, for more information on the limitations of this  
feature. Because of the limitations of this feature, always  
provide your best knowledge of your location to the  
emergency response center when you make an  
emergency call.  
Press View (left softkey). (To dial the phone  
number, press `after displaying the entry.)  
To display a Missed Call entry from standby mode:  
1. Press `or /> Recent Calls.  
2. Highlight an entry and press r.  
24  
 
In-Call Options  
Important: Always report your location to the 911 operator  
when placing an emergency call. Some  
designated emergency call takers, known as  
Public Safety Answering Points (PSAPs) may not  
be equipped to receive GPS location information  
from your phone.  
Press /during a call to display a list of available  
in-call features. To select an option, highlight it and  
press r. The following options may be available:  
Hold to place the call on hold.  
Emergency calls cannot be placed while the  
keypad is locked.  
3 Way to initiate a three-way call.  
Use Bluetooth to switch from the phone’s microphone  
to a Bluetooth device.  
If you have not registered on the network,  
emergency calls cannot be placed while your  
SIM card is in your phone.  
2nd Call to place a second call.  
Contacts to display your Contacts list.  
Recent Calls to display Recent Calls list.  
My Info to display your phone’s Information.  
Memo to display the phone’s electronic notepad.  
Datebook to enter a datebook event.  
Messages to create a message.  
If you are bringing your phone number to Nextel  
from your previous carrier, you may receive a  
temporary telephone number while your Nextel  
phone is being programmed with your  
permanent phone number. If you make a call to  
911 and the call fails, the 911 emergency  
response center will not be able to call you back  
on your Nextel phone if in the meantime, your  
Nextel phone has been programmed with your  
permanent telephone number. If the call is  
disconnected before location and details have  
been provided, call 911 again and advise that you  
were disconnected.  
Store to store a new contact.  
Record to record the phone call.  
GPS to enter the GPS application.  
In Call Setup to modify the in-call features.  
25  
 
To view Call Details and Call Info:  
1. Select a recent call.  
Speakerphone  
Press )or Speaker (right softkey) during a call to  
route the phone’s audio through the speaker or the  
earpiece.  
2. Press rto view the Call Details.  
3. Press ragain to view the Call Info.  
WARNING: Because of higher volume levels, do not place the  
phone near your ear during speakerphone use.  
Saving a Phone Number  
Mute  
1. Enter a phone number and press /.  
Press Mute (left softkey) during a call to mute the  
microphone. Press Unmute (left softkey) to unmute  
the microphone.  
2. Highlight Store Number and press r.  
3. To store a new entry, highlight [New Contact] and  
press rto add a new entry.  
– or –  
End-of-Call Options  
Search for an existing contact name and press r  
to save the new number.  
After you receive or make a call, the call duration is  
briefly displayed. You are then automatically taken to  
the Recent Calls list.  
4. Enter or edit information as necessary and press  
Save (left softkey) to save the Contact.  
To save a number that is not in your contacts:  
For more information about Contacts, see “8. Contacts”  
Highlight an entry and press Save (left softkey).  
26  
         
Finding a Number  
Note: You can have multiple pauses in a phone number and  
combine waits and pauses.  
To find Contacts entries, you can either scroll through  
the list using your navigation key or you can search  
Contacts entries by name.  
To dial or save phone numbers with pauses:  
1. Enter the phone number.  
1. Press /> Contacts.  
2. Press and hold *until the letter P appears. The P  
represents a three-second pause. For a longer  
pause, press the letter P more than once. Each P  
represents a three-second pause.  
2. Press Search (left softkey).  
3. Enter the first few letters of a Contact's name and  
press r. (The first contact entry that matches the  
entered text will be highlighted.)  
– or –  
Press and hold *until the letter W appears. The  
W means your phone waits before dialing further. A  
message appears asking about sending the rest of  
the digits.  
4. To display the Contacts entry, press r. To dial the  
entry's default phone number, press `.  
Phone Numbers With Pauses  
3. Enter additional numbers.  
4. Press `to dial the number.  
– or –  
You can dial or save phone numbers with pauses for  
use with automated systems, such as voicemail,  
conference call, or credit card billing numbers.  
There are two types of pauses available on your phone:  
Press /> Store Number to save the number in  
your Contacts.  
Wait sends the next set of numbers when prompted.  
Pause automatically sends the next set of numbers  
after three seconds.  
Note: When dialing a number with a wait, press Yes (left  
softkey) to send the next set of numbers.  
27  
     
2. Say a voice name. Your phone plays the name  
Making a Call From Contacts  
back to you.  
1. Press /> Contacts.  
3. The call is placed automatically.  
2. Highlight an entry and press `to dial the default  
phone number.  
Tip: To stop a phone call from being completed,  
press the Smart Button (().  
– or –  
To dial another number from the entry, highlight  
the name, press the navigation key right or left until  
the correct number type appears, and then  
press `.  
Making a Phone Call While in a Direct  
Connect Call  
Pressing `while in an active Direct Connect lets you  
initiate a phone call to the other person if their mobile  
phone number is stored in Contacts.  
Making a Call From Recent Calls  
1. Press `or /> Recent Calls.  
1. While in a Direct Connect conversation press `.  
(You will see a Start Call To: prompt.)  
2. Highlight an entry and press `.  
2. Press Yes (left softkey) or press rto switch from  
the Direct Connect call to a phone call.  
Making a Phone Call Using a Voice Name  
If you have created a voice name in Contacts (see  
page 100), say the voice name into your phone to  
enter the number.  
Speed Dialing  
Each phone number stored in Contacts is assigned a  
Speed Dial number, which you can use to call that  
number. You can store up to 600 numbers in your  
phone’s speed dial memory.  
1. With the phone closed, press and hold  
s
until a  
prompt appears telling you to say the voice name.  
28  
               
1. Enter a speed dial number and then press #.  
2. Press `to dial the number.  
To use Turbo Dial® for speed dial locations 1–9:  
Group Connect® allows nationwide Direct Connect  
calling to up to 20 other Direct Connect users at  
TalkgroupSM allows Direct Connect calling to up to  
100 Nextel subscribers in the same Direct Connect  
Nextel Direct TalkSM lets you establish off-network,  
two-way radio communication between two or more  
Nextel Direct Talk-capable phones. See “Direct Talk”  
Press and hold the appropriate key for  
approximately two seconds. The display confirms  
that the number has been dialed when it shows  
“Calling...”.  
Redialing the Last Number  
See www.nextel.com for more details on these Direct  
Connect services. Pricing for each of these services is  
based on your service contract.  
Press and hold `.  
Nextel Direct Connect  
Making Direct Connect Calls  
Nextel offers the following Nextel Direct Connect®  
services:  
Direct Connect® allows instant two-way radio  
communication with another Direct Connect user  
anywhere on the Nextel National Network (U.S.).  
1. Enter a Direct Connect number. See “Dialing Direct  
2. Press and hold the Direct Connect (DC) button on  
the left side of your phone. Begin talking after your  
phone emits a chirping sound.  
International Direct Connect allows Direct Connect  
calling to and from select countries.  
3. Release the DC button to listen.  
29  
     
A Direct Connect call ends automatically after there is  
no activity on the call for several seconds.  
Using Just the Member ID  
If you are contacting someone sharing your network  
and area IDs, you only need to enter the member ID  
(the last part of the number).  
Dialing Direct Connect Numbers  
Every Direct Connect number has three parts:  
An area ID.  
1. Enter a member ID.  
2. Press and hold the DC button.  
A network ID.  
A member ID.  
Making Direct Connect Calls From Contacts or  
Recent Calls  
An asterisk separates each part (for example:  
999*999*9999). When you enter a number containing  
all three parts, you must separate them with asterisks.  
If you have numbers stored in Contacts (page 98) or  
Recent Calls (page 93), you can use these numbers to  
make calls.  
Note: The number of digits in each part of a Direct Connect  
number may vary. For example, your Direct Connect  
number may be formatted as 999*999*9999, while  
another valid number may appear as 555*555555*55.  
1. Press /> Contacts or Recent Calls.  
2. Highlight an entry and then press and hold the DC  
button to call the entry’s Direct Connect number.  
If you are calling or saving a Direct Connect number for  
a Sprint phone with Direct Connect capabilities, the  
Direct Connect number may be the same as the  
wireless phone number. When dialing or saving the  
Direct Connect number, insert asterisks in place of  
hyphens (913*555*1234).  
Tip: You can make Direct Connect calls while viewing entry  
details on either list. Display the entry details or My Info  
from another phone (in Recent Calls) and press and hold  
the DC button.  
Tip: When you store a Direct Connect number in Contacts, be  
sure to include the entire number, including the asterisks.  
30  
         
Making Direct Connect Calls Using a Voice Name  
Group Connect  
If you have created a voice name in Contacts, say the  
voice name into your phone to enter the number.  
A Group Connect call is similar to a Direct Connect call  
to one user, but is made to multiple Direct Connect  
subscribers at once. You can create Groups from your  
phone and call up to 20 other Group Connect-  
compatible phones* anywhere on the Nextel National  
Network. You can create a Group for one-time use or  
store it to Contacts so you can call it at any time.  
1. With the phone closed, press and hold the speaker  
button (  
s) until a prompt appears telling you to  
say the name.  
2. Say the name. Your phone plays the name back to  
you.  
3. Press and hold the DC button.  
Note: In order to store Groups to your i890 phone, you must  
use the 128K SIM card that came with your phone. The  
128K SIM card is labeled “Nextel 1200 Contcs & 25  
Grps”. With this SIM card, a maximum of 25 groups can  
be added to your i890 phone. Group entries created  
with your i890 phone may not be readable by older  
iDEN SIM-based phones.  
Answering Direct Connect Calls  
When you receive a Direct Connect call, your phone  
emits a tone or vibrates. You then hear the voice of  
your caller.  
1. Wait for the caller to finish speaking.  
2. Press and hold the DC button. Continue as you  
would on any Direct Connect call.  
Making Group Connect Calls  
3. Press @to end the call.  
1. From Contacts or the Recent Calls list, highlight or  
select a Group.  
A Direct Connect call ends automatically after there is  
no activity on the call for several seconds.  
2. Press the DC button  
31  
         
.
record a Group name. When you have finished,  
press Back (right softkey).  
Tip: You can also start a Group Connect call by entering or  
selecting a Direct Connect number. See “Starting a  
6. Press Save (left softkey).  
Adding Group Members  
Answering Group Connect Calls  
You can add Group members that have a Direct  
Connect number and Group Connect-compatible  
phone to your Group by selecting them from Contacts,  
the Recent Calls list, Memo, or by manually entering  
the Direct Connect number from your keypad. You can  
also add all members in an existing Group to another  
Group by selecting the Group name from Contacts.  
Proceed as if answering a Direct Connect call from  
one user. Only one person at a time may speak on  
a Group Connect call.  
Creating Groups in Contacts  
1. Press /> Contacts.  
To add Group members from Contacts, the Recent Calls  
list, or Memo:  
2. Select [New Group].  
3. To assign a name to the Group, enter the name.  
1. While creating a Group, select [Add Member].  
Note: If you do not assign a name, the Group is named  
“Group” followed by the number of members in the  
Group. For example, “Group (8)” is a group with eight  
members.  
Note: To move between Contacts, the Recent Calls list, and  
Memo, scroll left or right.  
2. Highlight desired entries and press r. A  
checkmark appears next to each selected  
member.  
4. Add Group members. See “Adding Group  
Note: To deselect a member, highlight it and press r.  
5. To create a voice name for the Group (optional),  
select [Options] > Voice Name. Follow the prompt to  
32  
     
3. Press Done (left softkey) and then press Save (left  
softkey) to save the group.  
3. Add more Group members. See “Adding Group  
To add Group members manually from the keypad:  
1. While creating a Group, select [Add Number].  
2. Enter the Direct Connect number.  
4. To save the Group, press /> Store Group.  
– or –  
To call without saving, press Done (left softkey).  
5. To make the call, press the DC button.  
3. Press rand then press Save (left softkey).  
Removing Members or Groups  
Starting a Group Connect Call With a  
Direct Connect Number  
To remove a member from a Group:  
1. From Contacts, highlight a Group and press Edit  
1. Press /> Push To Talk > Direct Connect, select  
entries for a Group Connect call, and go to step  
four. (To add members or numbers from Recent  
Calls or Memo, scroll left or right.)  
(left softkey).  
2. Highlight a member and press />  
Remove Member.  
– or –  
3. Press Save (left softkey)  
.
From standby mode, enter a Direct Connect  
number.  
Note: You can also select Remove All Members however,  
you will have to add at least two new members to save  
the edited Group.  
– or –  
From Contacts or Recent Calls, highlight an entry  
containing a Direct Connect number.  
To delete a Group from Contacts:  
1. From Contacts, highlight a Group.  
2. Press /> Delete Group.  
2. Press /> New Group or Call New Group.  
33  
     
3. Press Yes (left softkey).  
2. Select a number or member to store.  
3. Add more information to the entry (optional).  
4. Press Save (left softkey).  
Storing Groups  
To store a group to Contacts from the Recent Calls list:  
To store a member from an active call:  
1. From the Recent Calls list, select a Group and  
press Save (left softkey).  
1. During an active Group Connect call, press />  
Store Number.  
2. Add more information to the entry (optional).  
3. Press Save (left softkey).  
2. Select a number or member to store.  
3. Add more information to the entry (optional).  
Note: You cannot record a voice name during an active call.  
To store a group to Contacts from an active call:  
1. During an active Group Connect call, press />  
Store Group.  
4. Press Save (left softkey).  
2. Add more information to the entry (optional).  
Group Connect Call Information  
Note: You cannot record a voice name during an active call.  
While you are in a Group Connect call, the following  
appears on the screen:  
3. Press Save (left softkey).  
The name of the Group.  
Storing Members of Groups  
The name or the Direct Connect number of the  
person speaking.  
To store a member from the Recent Calls list or within  
Contacts:  
The number of members who are participating in the  
Group Connect call.  
1. Display a Group and press /> Store Number.  
34  
Group Connect Call Details  
Nextel Direct Send  
During a Group Connect call, you can view details  
about the other group members, such as their name or  
Direct Connect number, and their status on the call.  
Nextel Direct Send lets you use Direct Connect calls to  
exchange pictures, My Info, contact information, and  
Groups with other phones that have this capability.  
To view Group Connect call details:  
Nextel Direct Send cannot be used during Talkgroup  
calls. Pictures cannot be sent in Group Connect calls.  
Press Details (left softkey).  
In the Details view, these icons appear next to member  
names or Direct Connect numbers:  
Sending a Picture  
When you send a picture using Nextel Direct Send, the  
picture appears on the display of the receiving phone,  
and is saved by that phone.  
The member of the Group who is speaking.  
F
A member of the Group who is active on the  
Group Connect call, but not speaking.  
E
Sending a Picture During a Call  
A member of the Group who has exited the  
call.  
D
You can send a picture at any time during a Direct  
Connect call, whether you made or received the call.  
(Additional charges may apply.)  
A member of the Group who could not be  
reached on the Group Connect call.  
H
You cannot talk or listen on a Direct Connect call while  
a picture is being transmitted. Other activities, such as  
searching for a picture, do not prevent you from talking  
or listening.  
A member of the Group whose status is  
unknown.  
G
35  
         
To send a picture during a call:  
Tip: When a person sends you My Info from his or her phone,  
including his or her Direct Connect number and IP  
address, you can then easily store this information to  
Contacts from the Recent Calls list.  
1. While in a Direct Connect call, press Picture (right  
softkey). A list of pictures that can be included in a  
Direct Connect call appears.  
To start a call by sending a picture:  
2. Select a picture and press the DC button to send it.  
1. Press /> Multimedia > Media Center and then  
3. Wait while the picture is transmitted. The Direct  
Connect call is temporarily interrupted while a  
picture is transmitted.  
highlight or select a picture.  
2. Press /> Send Via... > Direct Send.  
4. When prompted, press the DC button to resume  
3. Select A Contact or A Recent Call. These names  
have Direct Connect numbers and IP addresses  
stored.  
the Direct Connect call.  
Note: The first time you send a stored picture after turning the  
phone on, the message Picture Fees May Apply  
appears and you are prompted to respond. Press Yes  
(left softkey) to send the picture. Press No (right softkey)  
to cancel.  
4. Select a name and press the DC button to send  
the picture.  
5. When prompted, press the DC button to resume  
the Direct Connect call.  
Starting a Call by Sending a Picture  
Receiving a Picture  
You can start a call by choosing a stored picture from  
the Media Center.  
When someone sends you a picture using Nextel  
Direct Send, your phone emits a tone or vibrates and a  
message appears on the display asking you to accept  
the picture.  
To do this, you must have the recipient’s Direct Connect  
number and IP address stored in your Contacts.  
36  
   
Pictures you receive are saved to your phone’s memory  
and are accessible through the Media Center.  
Tip: To stop the transmission before it is finished, press  
Cancel (right softkey).  
When you receive a picture, it appears every time you  
are in a Direct Connect call with the person who sent it  
unless you delete the picture from the Media Center.  
This occurs for the last 20 people who sent you  
pictures.  
Setting Picture Capability  
To turn your phone’s ability to send and receive pictures in  
Direct Connect calls on or off:  
1. Press /> Push To Talk > PTT Options > On/Off  
Settings.  
To accept a picture:  
1. When you see the message asking you to accept  
the picture, press Yes (left softkey). (To decline the  
picture press No [right softkey].)  
2. Highlight Pictures and press rto check or  
uncheck the box.  
3. Press Done (left softkey) to save the setting.  
2. Wait while the picture is transmitted. The Direct  
Connect call is temporarily interrupted while a  
picture is transmitted.  
This setting does not affect your phone’s ability to send  
and receive My Info or contact information.  
3. When prompted, press the DC button to resume  
the Direct Connect call.  
Sending My Info and Contact Information  
When you send My Info or contact information using  
Nextel Direct Send, the information you send appears  
on the display of the receiving phone. After the call, the  
information appears on that phone’s Recent Calls list.  
Note: The first time you accept a stored picture after turning  
the phone on, the message Picture Fees May Apply  
appears and you are prompted to respond. Press Yes  
(left softkey) to accept the picture. Press No (right  
softkey) to cancel.  
37  
   
4. When you are finished, press Done (left softkey).  
To control whether your information is sent automatically:  
1. Press /> Tools > My Info.  
Sending My Info  
You can control what portion of the information in My  
Info is sent and whether it is sent automatically in every  
Direct Connect call or only when you choose to send it.  
2. Press /> Direct Send Setup > Auto Send.  
Tip: When you send My Info, certain information, such as your  
email address or fax number, cannot be included. To  
send complete contact information, create an entry for  
yourself in Contacts and send it.  
3. Select On to send your information automatically,  
or Off to send your information only when you  
choose to send it.  
Note: When you receive your phone, it is set to send your  
The information your phone sends always includes My  
Name and Direct Connect.  
information automatically.  
To send My Info during a call:  
It may include Line 1, Line 2, Carrier IP, Direct Connect,  
and Group ID depending on the options provided by  
your service provider and how you set your sending  
options.  
1. While in a Direct Connect call, press />  
Direct Send My Info.  
2. When Ready To Send appears, press the DC button  
to send the information.  
The default setting is Line 1 only.  
To change which fields are sent:  
To start a call by sending My Info:  
1. Press /> Tools > My Info.  
2. Press /> Direct Send My Info.  
1. Press /> Tools > My Info.  
2. Press /> Direct Send Setup > Info To Send.  
3. A checkmark appears next to the fields that will be  
sent. To add or remove the checkmark, select the  
field.  
3. Enter a Direct Connect number or press Browse  
(left softkey) and select a number from Contacts,  
Recent Calls, or Memo.  
38  
 
4. When Ready to Send appears, press the DC button  
2. Press /> Send Via... > Direct Send.  
to send the information.  
Note: If the Contacts entry you scrolled to is a Group, you may  
be prompted to allow yourself to be a part of the group  
being sent. Press Yes (left softkey) to become part of  
the group.  
Sending Contact Information  
You can send contact information by selecting a  
Contacts entry.  
3. Enter a Direct Connect number or press Browse  
(left softkey) and select a number from Contacts,  
Recent Calls or Memo.  
Contacts entries that contain only addresses cannot be  
sent. When Contacts entries are received, they do not  
include ring tones or pictures.  
4. When Ready To Send appears, press the DC button  
to send the contact information.  
To send contact information during a call:  
1. While in a Direct Connect call, press />  
Receiving My Info or Contact Information  
Contacts.  
When you receive My Info or contact information from  
another phone, an icon appears on the display.  
2. Highlight a Contacts entry and press />  
Send Via... > Direct Send.  
My Info  
3
2
Note: If the Contacts entry you scrolled to is a Group, you may  
be prompted to allow yourself to be a part of the group  
being sent. Press Yes (left softkey) to become part of  
the group.  
Contact Information  
To view the information while still in the Direct Connect call:  
Press /> View Contact.  
3. When Ready to Send appears, press the DC button  
to send the contact information.  
You can also view My Info from other phones on the  
To start a call by sending contact information:  
1. From Contacts, highlight or select an entry.  
39  
       
2. To include yourself in the Group, press Yes (left  
softkey). To exclude yourself, press No (right  
softkey).  
Sending Groups Using Direct Send  
You can send a Group using Nextel Direct Send so that  
the person who receives the Group can use the list.  
3. Select Direct Send.  
To send a Group from the Recent Calls list:  
4. Enter a Direct Connect number or press Browse  
(left softkey) and select a number from Contacts,  
Recent Calls or Memo.  
1. From Recent Calls, highlight a Group and press  
/> Send Group.  
2. To include yourself in the Group, press Yes (left  
softkey). To exclude yourself, press No (right  
softkey).  
5. When Ready To Send appears, press the DC button  
to send the Group.  
The Group will appear in the Recent Calls list on the  
phone to which you sent the Group.  
Note: If you choose to include yourself and the Group already  
contains 20 members, you will be prompted that the list  
is full. You will be excluded from the list.  
Talkgroups  
3. Enter a Direct Connect number or press Browse  
(left softkey) and select a number from Contacts,  
Recent Calls, or Memo.  
A Talkgroup is a predetermined group of Direct  
Connect users, created by an account administrator.  
Talkgroups can contain up to 100 members.  
4. When Ready To Send appears, press the DC button  
to send the contact information.  
Difference Between Group Connect and  
Talkgroup Calls  
To send a Group from Contacts:  
1. From Contacts, highlight a Group and press />  
Send Via....  
In a Group Connect call, you or another caller  
determines who can participate in the call. By contrast,  
40  
                 
participation in a Talkgroup is determined by an  
administrator. Here are the ways Group Connect and  
Talkgroup calls differ.  
1. Press Contacts (right softkey) and highlight a  
Talkgroup.  
2. Press Join (left softkey).  
You can now receive communications from other  
members of this Talkgroup.  
Group  
t
Talkgroup  
Group Icons  
Geography  
r
You will hear all active Talkgroup conversations on your  
phone. To silence them, press /> Push To Talk >  
PTT Options > Tkgrp Silent and then select On.  
Nationwide  
Limited to local  
market and network  
(fleet)  
21 (including  
originator)  
100  
Maximum  
Group Size  
Adding More Talkgroups  
You can be included in additional Talkgroups by doing  
one of the following:  
Dynamically,  
via your phone administrator using  
Talkgroup  
Predefined, via Nextel  
Setup  
Using Talkgroup Management at www.nextel.com. You  
must be an account administrator to use Talkgroup  
Management.  
Management  
Voice  
Activated  
Dialing  
Yes  
No  
Contacting your Nextel Sales Representative at the  
time of activation.  
Making Talkgroup Calls  
Joining a Talkgroup  
1. Press  
and then enter the Talkgroup number.  
#
To participate in a Talkgroup, the account administrator  
must first add you to the membership and then you  
must “join” the Talkgroup.  
– or –  
41  
 
Select the Talkgroup from Contacts or the Recent  
Calls list.  
2. When “Ready to Alert” appears, press the DC  
button to send the Call Alert.  
2. Press the DC button and continue as if making a  
Direct Connect call.  
Note: You can send a Call Alert from Recent Calls or  
Contacts. Select a Direct Connect number and  
continue as explained above.  
Receiving Talkgroup Calls  
Send a Call Alert with the Phone Closed  
Answer it as you would a regular Direct Connect  
call. Only one person at a time may speak on a  
Talkgroup call.  
1. Press the Smart Button (().  
2. Use the external touch media keys to select  
Recent Calls.  
During and immediately after a Talkgroup call ends,  
press Options (right softkey) to display any available  
options.  
3. Use the volume button to highlight the person you  
wish to call, and press the center touch media key.  
4. When “Ready to Alert” appears, press the DC  
button to send the Call Alert.  
Call Alerts  
Responding to a Call Alert  
Call Alerts let you notify others that you want to  
communicate with them using Direct Connect. When a  
user receives a Call Alert, the phone sounds a tone  
and displays your name or Direct Connect number.  
Note: You can set a distinctive ringer for Call Alerts. See “Ring  
To answer a Call Alert:  
Sending Call Alerts  
Press the DC button to make a Direct Connect call  
to the sender.  
1. Enter a Direct Connect number and press Alert  
(left softkey).  
42  
     
To clear a Call Alert:  
Press Clear (right softkey).  
To store a Call Alert in the Call Alert queue:  
Press Queue (left softkey).  
Responding to Call Alerts in the Queue  
After you queue a Call Alert, you can respond to it by  
making a Direct Connect call to the sender or sending  
a Call Alert to the sender.  
To make a Direct Connect call to the sender:  
Note: The Recent Calls list also stores Call Alerts you have  
received. They appear as Direct Connect calls. Call  
Alerts remain in your Recent Calls list until you delete  
them or until they reach the end of the list.  
1. Press /> Push To Talk > Call Alert.  
2. Highlight a Call Alert and press the DC button to  
begin the call.  
This removes the Call Alert from the queue.  
To send a Call Alert to the sender:  
Using the Call Alert Queue  
When you queue a Call Alert, it remains in the Call Alert  
queue until you make a Direct Connect call to the  
sender or delete it.  
1. Press /> Push To Talk > Call Alert.  
2. Highlight a Call Alert and press Alert (left softkey).  
Ready to Alert appears on the display.  
Viewing Call Alerts  
3. Press the DC button until Alert Successful appears  
1. Press /> Push To Talk > Call Alert.  
2. Scroll through the list.  
on the display.  
Deleting Call Alerts  
Viewing Call Alert Date and Time  
1. Press /> Push To Talk > Call Alert.  
2. Highlight a Call Alert and press r.  
To delete a Call Alert from the queue:  
1. From the Call Alert queue, highlight a Call Alert  
and press /> Delete.  
43  
       
2. Press ror press Yes (left softkey) to confirm.  
To delete all Call Alerts from the queue:  
To send a message after receiving or making a call:  
1. After a failed incoming or outgoing Direct Connect  
call, within five seconds, Send Text Message To will  
appear.  
1. From the Call Alert queue, press /> Delete All.  
2. Press ror press Yes (left softkey) to confirm.  
2. Press Yes (left softkey) to send your predefined  
message or press No (right softkey) to cancel.  
Call Status and Completion  
3. To edit a message before sending it, press  
/> Edit  
After a failed incoming or outgoing Direct Connect call  
or Call Alert, you can send a message to the caller or  
intended recipient.  
Direct Talk  
To set up a message for incoming or outgoing calls:  
Nextel Direct Talk allows for two-way radio  
1. Press /> Settings > Advanced >  
communication “off the network” between two or more  
phones equipped with this capability. This feature is  
useful in areas without network coverage.  
Call Completion > Incoming Call or Outgoing Call.  
2. In the Send Msg field, select Off, Ask First, or  
Automatic.  
You can make:  
3. Select Message and create a message to be sent,  
or press QNotes (left softkey) and select a  
predefined message.  
Code calls – two-way radio calls conducted off the  
network and using open channels and codes. In  
these calls, anyone using your same channel and  
code can hear your conversation.  
4. Press rand then press Back (right softkey).  
Private calls – two-way radio calls conducted off the  
network and using the wireless phone numbers of  
44  
     
the participants. In these calls, others using the same  
channel cannot listen in.  
To return to network mode from Direct Talk:  
1. Press /> Push To Talk > DT Options.  
2. Select Exit Direct Talk.  
When using Direct Talk mode, the two phones should  
be a minimum of six feet apart to maximize  
After a few seconds, your phone returns to network  
service.  
performance and improve transmission range. You can  
only make Direct Talk calls to users located within your  
range. This varies according to terrain, man-made  
structures, and atmospheric conditions.  
Code Direct Talk Calls  
Most traditional phone features are not available in  
Direct Talk mode, including on-network phone calls;  
Direct Connect, Group Connect, Talkgroup calls, and  
Call Alerts; data services; messaging; call timers; and  
call forwarding.  
To make Direct Talk Code calls, both parties must be  
on the same channel and code and have their phones  
set to Direct Talk. Anyone within range who is set to the  
same code and channel can hear all conversations.  
To set a channel and code:  
Setting Your Phone to Direct Talk  
1. In Direct Talk mode, press Edit (left softkey) >  
Channel, and then select a channel.  
Before you and another caller can use Direct Talk, both  
of your phones must be set to Direct Talk mode.  
2. Select Code and select a code.  
3. Press Back (right softkey) to return to the Direct Talk  
standby screen.  
1. Press /> Push To Talk > Direct Talk.  
2. Select Go To Direct Talk.  
After a few seconds, your channel and code appear on  
the display screen. Your phone displays the last  
channel and code used for Direct Talk.  
45  
   
To set your phone to Private Only:  
Making and Receiving Code Calls in Direct Talk  
Mode  
1. In Direct Talk mode, press Edit (left softkey) >  
Code > Pvt Only.  
In Direct Talk mode, press and hold the DC button.  
Your phone displays Transmitting, along with the  
channel and code selected.  
2. Press Back (right softkey) to return to the Direct Talk  
standby screen.  
The tone emitted from your phone when making a  
Direct Talk call sounds different from the tone heard on  
Direct Connect calls conducted on the network.  
To reach you, other Direct Talk callers must be on your  
same channel and dial your ten-digit wireless phone  
number to reach you.  
If you receive an error message, this means:  
There may be no parties on your channel or code.  
You are out of range.  
Note: You do not need to set your phone to Private Only to  
receive Private calls. If you are on the same channel as  
your caller, you can receive Private Direct Talk calls.  
Making a Private Direct Talk Call  
When you receive a Code call using Direct Talk, your  
phone displays Receiving, along with the channel and  
code selected. Reply as on a Direct Connect call.  
You can make Private Direct Talk calls to any person on  
your same channel. You do not need to set your phone  
to Private Only.  
Private Direct Talk Calls  
To make a private Direct Talk Call:  
Private Direct Talk allows you to silence all the calls on  
a channel that are not directed specifically at you. To  
do this, you must first set your phone to Private Only.  
1. In Direct Talk mode, enter a ten-digit wireless  
phone number. (You can also select a number  
from Contacts or Recent Calls.)  
2. Make the call in the same way you make a regular  
Direct Connect call.  
46  
 
If you receive an error message, it means:  
Making Emergency Calls While in Direct  
Talk Mode  
You may not be using a valid wireless phone  
number.  
If you attempt to make an emergency 911 call while in  
Direct Talk mode, your phone automatically exits Direct  
Talk mode and attempts to find a network signal.  
The person that you are trying to reach may not be in  
Direct Talk mode.  
The person that you are trying to reach is set to a  
If you are out of network coverage, your phone cannot  
make an emergency 911 call until you return to a  
network coverage area. You must wait until the phone  
reconnects to a network before attempting to make an  
emergency 911 call.  
different channel, or is out of range.  
Receiving All Calls on a Channel  
You can set your phone to receive all Direct Talk  
transmissions that are within range and set to the same  
channel. Do this by selecting Receive All, instead of a  
code.  
You cannot initiate a call when the code is set to  
Receive All. If you press the DC button to initiate a  
Direct Connect call and your code is set to Receive All,  
you receive an error message.  
To set the code to Receive All:  
1. In Direct Talk mode, press Edit (left softkey) >  
Code > Receive All.  
2. Press Back (right softkey) to return to the Direct Talk  
standby screen.  
47  
 
Message Center  
4. Service Features:  
The Basics  
The message center manages your messages. You  
can listen to or view voicemail messages, Multimedia  
Messaging Service (MMS) messages (which include  
most phone-to-phone text messages), Net alerts, and  
SMS text messages in the message center.  
The message center also lets you create and send  
MMS messages, including phone-to-phone text  
messages. It stores messages you have sent and lets  
you save drafts of messages you are creating.  
Accessing the Message Center  
Press /> Messages.  
Message Center Options  
After accessing the message center, select an option:  
[Create Message] — begin creating an MMS  
message.  
Voice Mail — access received voicemail messages.  
Inbox — access received MMS and SMS messages.  
48  
       
Drafts — access MMS messages you have created  
and saved but not sent.  
To dismiss the message notification, press Later  
(right softkey).  
Outbox — store MMS messages that were not sent.  
Sent Items —access MMS messages you have sent.  
Net Alert — access alerts that you receive from Nextel.  
If you dismiss the notification, the message is not  
deleted. You can access it through the message center.  
If you are not on a phone call when you receive a  
message, your phone sounds a notification tone every  
30 seconds until you access the message, you dismiss  
the notification, or the alert time-out expires.  
Receiving Messages  
When you are on a phone call, you can receive  
message notifications for all types of messages except  
MMS messages. For other types of messages, your  
phone may sound a notification tone during the call or  
after you end the call, depending on how you set your  
notification options.  
When you receive a voicemail message, Multimedia  
Messaging Service (MMS) message, text message  
(SMS), or Net alert, you have two ways to access the  
message:  
Respond to the message notification that appears  
when the message is received.  
For information on notification options, see “Setting  
Dismiss the message notification and access the  
message later through the message center.  
Retrieving Your Messages  
Message Notifications  
1. Press /> Messages.  
When you receive a message, your phone notifies you  
with text on the display and a notification tone or  
vibration. You can access the message or dismiss the  
notification.  
2. Highlight a message type (such as Voicemail or  
Inbox) and press r.  
49  
     
your password. Enter the last seven digits of your  
Nextel PTN. For example: 5557777. This is your  
temporary password. Follow the system instructions to  
complete your mailbox setup.  
Voicemail  
Tip: To receive voicemail messages, you must first set up your  
voicemail box.  
You are in the main voicemail menu when you hear the  
voicemail system options.  
If you are bringing your phone number from another  
carrier, we suggest you set up your voicemail box after  
the number you brought to Nextel is active on your Nextel  
phone and your temporary phone number is deactivated.  
If you set up your voicemail box prior to this, all messages  
and all settings (including your greeting and password)  
will be lost when the number you have brought to Nextel  
becomes active.  
For details on using your voicemail, follow the audio  
prompts provided by the voicemail system.  
Playing Messages  
When you receive a new voicemail message, you  
can either listen to it immediately by pressing Call  
(left softkey), or later by pressing Back (right  
softkey).  
Setting Up Your Voicemail Box  
Using your i890 phone, dial your ten-digit Nextel  
Personal Telephone Number (PTN). For example:  
7035557777. Follow the system instructions to create a  
new four- to seven-digit password, record your name,  
and record a greeting. When the system says, “Thank  
you for using Nextel Voicemail,” your mailbox is set up.  
To listen to your voicemail messages after  
dismissing the onscreen prompt, press />  
Messages > Voice Mail. You will be connected to  
your voicemail box.  
To access your voicemail messages from another  
phone, dial your wireless phone number. When  
you hear the voicemail greeting, press *and  
then enter your voicemail passcode.  
If you are setting up your voicemail from a phone other  
than your i890 phone, dial your ten-digit Nextel PTN.  
When you hear the greeting, press *to access your  
voicemail box. The system will prompt you to enter  
50  
         
Creating and Sending Messages  
Multimedia Messages (MMS)  
Each message you create may contain the following  
fields:  
Multimedia Messaging Service (MMS) lets you send  
and receive messages that may include text, pictures,  
and audio recordings.  
To — the phone numbers or email addresses of one  
or more recipients.  
Your MMS address is [email protected].  
Your PTN is your ten-digit Nextel Personal Telephone  
Number.  
Message — the body of the message. This may  
include text, pictures, ring tones, or voice records.  
Subject — the subject line.  
Note: Most common phone-to-phone text messages are sent  
and received as MMS messages on your i890 phone.  
Text messages sent from other phones or mobile  
devices to your phone number arrive as MMS  
messages.  
Attach — one or more attachments. These may be  
pictures, ring tones, or audio files, including voice  
records that you create while creating the message.  
Cc — the phone numbers or email addresses of  
additional recipients.  
Accessing MMS Messages  
Auto Replies — lets you insert replies the recipient can  
choose from when replying to your message, if the  
recipient’s phone also has this feature.  
1. Press /> Messages.  
2. Select Inbox (also includes SMS messages),  
Drafts, or Sent Items.  
Priority — sets the message priority to normal or high.  
Valid Until — sets a date after which no further  
attempts are made to deliver the message.  
If you have more than 9 messages, scroll right or  
left to display the next or previous page.  
To send a message, you must address it to at least one  
recipient. All other message fields are optional and you  
can fill them in any order.  
To open a message on the current page:  
Highlight a message and press r.  
51  
               
Entering Text  
Creating a Message  
In message fields that require you to enter text, you can  
begin entering the text from the keypad when the field  
is highlighted.  
1. Press /> Messages > [Create Message].  
Tip: You can also select [Create Message] from Inbox, Drafts,  
or Outbox or begin messages from Contacts, Recent  
Calls, Media Center, or standby mode, or by replying to a  
message in your inbox.  
While entering text, press /to choose a text input  
mode from the context-sensitive menu. (See “Entering  
2. Address the message:  
Select To. Enter the phone number or email  
address from the keypad and press r. Repeat  
this action to enter more phone numbers or email  
addresses.  
Message Size  
You can create and send messages of up to 100 KB,  
including attachments, for MMS. The size of the  
message appears at the top of the display as you are  
creating the message.  
– or –  
Press Search (left softkey) to select recipients from  
Contacts or Recent Calls. Highlight recipient(s),  
press rto select them (entries will be checked),  
and then press Done (left softkey).  
Sending or Canceling  
To send the message at any time after it has been  
addressed:  
If necessary, press Back (right softkey) to return  
from the Send To screen to the main Message  
screen.  
Press Send (left softkey) or press /> Send.  
To cancel the message at any time:  
At the message screen, press Cancel (right softkey)  
or press @to cancel the message and save it in  
Drafts.  
Tip: To remove a phone number or email address from the list  
of message recipients, highlight the phone number or  
email address and press Remove (left softkey).  
52  
3. To enter or edit the body of the message:  
3. To attach a picture, audio, voice recording, or  
video, select Attach > [New Attach] and then select  
an option to attach a file.  
Select Message and then use any of the following  
options to enter your message.  
4. To add CC’s, select Cc and add recipient(s).  
Note: If you have created a signature, the signature  
automatically appears in this field. Text you enter  
appears before your signature. (See Adding a  
5. To insert replies the recipient can choose from  
when replying to your message, select  
Auto Replies.  
Enter text from the keypad.  
Enter text from the keypad or select a Quick Note  
(see “Quick Notes” on page 55). Press Back (right  
softkey) when you are finished.  
Use a Quick Note. See “Quick Notes” on  
6. To set the priority of the message, select Priority  
and then select a setting.  
Insert a picture, a video, or an audio file.  
When you are finished, press r.  
7. To set a date after which attempts to deliver the  
message end:  
4. To send the message without additional options,  
press Send (left softkey) or press /> Send.  
Select Valid Until, enter a date, and press r.  
To set no date, press No Date (left softkey).  
Adding More Message Options  
8. To send the message, press Send (left softkey) or  
press /> Send.  
1. To view more fields in a message, scroll to MORE  
and press r.  
2. To create or edit the subject line, select Subject,  
enter a subject, and press r.  
53  
Replying to a Message  
Note: If the message you are replying to was sent with auto  
replies, it contains a numbered list of possible replies.  
Press the number of a reply. The reply is sent  
immediately without any further action.  
You can reply to a read message while you are viewing  
it or while it is highlighted in the Message Center. You  
cannot reply to unread messages.  
More Ways to Begin a Message  
When you reply to a message, some of the fields in  
your reply are filled in automatically. These may include  
To, Message (the first 40 characters of the received  
message), Subject, and Cc.  
In addition to beginning a message from the Message  
Center, you can begin a message from Contacts, the  
Recent Calls list, standby mode, or the Media Center.  
To reply to a message:  
To begin a message from Contacts:  
1. Display or highlight a read message and press  
Reply (left softkey). (To reply to the sender and all  
recipients, press /> Reply All.)  
1. From the Contacts list, highlight an entry.  
2. Scroll left or right to view the Contacts types until  
you see the icon for the phone number or email  
address to which to send the message.  
2. Select [Create Reply] and enter a reply message or  
select a short reply from the list.  
3. Press Create (left softkey) or press />  
Create Message.  
3. Edit any applicable message fields and press r.  
4. Press Send (left softkey).  
4. Create and send the message.  
Tip: To create new reply phrases to use in later reply  
To begin a message from the Recent Calls list:  
1. From the Recent Calls list, highlight an entry.  
54  
2. If the entry has more than one phone number  
stored, display the phone number to which to send  
the message.  
To insert a quick note:  
1. While you are creating a message, highlight or  
select Message or Subject and then press QNotes  
(left softkey).  
3. Press Create (left softkey) or press /> Create.  
4. Create and send the message.  
2. Select a Quick Note to insert into the message.  
To begin a message from standby mode:  
Tip: To add a quick note after you have already started  
entering a message, press /> Insert >  
Insert QNotes, and select a note.  
Enter a phone number and press />  
Create Message.  
To create new Quick Notes to use in later messages, see  
To begin a message from the Media Center:  
1. From the Media Center, highlight or select a picture  
or audio file.  
Inserting Pictures or Videos  
You can insert pictures or videos from Media Center. If  
the forward locked icon (u) appears next to a file, it  
cannot be included in a message.  
2. Press Send (left softkey).  
3. Create and send the message. The selected file is  
automatically included as an attachment.  
1. Highlight the Message field and press /> Insert >  
Insert Picture or Insert Video (You will see a list of  
available pictures or videos.) Scroll right or left to  
display files in the phone’s memory or on the  
memory card.  
Quick Notes  
When you are filling in the Message and Subject  
message fields, you can add preset words or phrases  
called Quick Notes. After you add Quick Notes, you  
can edit them as you would any other text.  
2. Highlight a picture or video and press r.  
55  
           
Removing an Inserted Item  
Note: You can also select Capture Picture or Capture Video  
to take a new picture or video to send.  
To remove an item inserted into a message:  
1. Select the Message field and highlight the item by  
Inserting Audio Files or Voice Records  
scrolling to the right.  
You can insert audio files from the Media Center or  
voice records from your voice records list. Preloaded  
audio files or files with the forward locked icon (u)  
cannot be included in a message.  
2. Press Delete (left softkey).  
Note: You can also attach items to messages by selecting  
MORE and then selecting Attach.  
1. Highlight the Message field and press /> Insert >  
Insert Audio. (You will see a list of available audio  
files.)  
Drafts  
While you are creating a message, you can save it in  
Drafts before you send it. You can view, edit, send, or  
delete saved drafts.  
Tip: To hear an audio file before inserting it, highlight the file  
name and press Preview (left softkey).  
2. Highlight an audio file or voice record and  
press r. (Scroll right or left to display available  
files in the phone’s memory or on the memory  
card.)  
Saving a Message in Drafts  
While you are creating a message, press />  
Save In Drafts and the message will be saved in  
drafts.  
To record a voice record, select Record Voice and  
After saving, you can continue to create the message.  
The version you saved in Drafts will not change.  
record a new voice record.  
Accessing Saved Drafts  
Press /> Messages > Drafts.  
56  
   
Sent Items  
Receiving a Message  
The Sent Items folder holds all messages that have  
been sent.  
When you receive an MMS message, a message  
notification appears on the display.  
To view the message:  
Forwarding Sent Items  
Press ror press Read (left softkey). The message  
is downloaded from the message server.  
1. Press /> Messages > Sent Items.  
2. Highlight a message and press /> Forward.  
3. Address, edit, and send your message.  
To dismiss the message notification:  
Press Later (right softkey).  
Outbox  
This icon 2 appears on the display, reminding you that  
you have a new message.  
Messages you tried to send are stored in the Outbox.  
Threaded Inbox  
Resending Messages  
If a message was not sent from your phone, you can  
resend it.  
The threaded inbox allows you to organize your  
messages by subject or sender.  
1. Press /> Messages > Outbox.  
1. From your inbox highlight a message.  
2. Highlight a message and press Resend (left  
softkey).  
2. Press /> Threading and select None, Subject or  
Sender.  
Note: If your message was sent successfully, Resend will not  
appear as an option.  
57  
       
Navigating a Message  
Actions for Received Messages  
As you scroll through a message, numbers, email  
addresses, and Web addresses are highlighted.  
Deleting  
To delete unread messages:  
Pictures and audio recordings are also highlighted.  
1. Highlight a message and press Delete (left softkey).  
2. Press ror press Yes (left softkey) to confirm.  
To delete read messages:  
Embedded Objects and Attachments  
Messages may contain pictures or audio files as part of  
the body of the message or as attachments.  
1. Highlight or view a message and press />  
If a message contains pictures or audio files in the  
body of the message, highlight each picture or audio  
file to view or play it.  
Delete Message.  
2. Press ror press Yes (left softkey) to confirm.  
If a message contains a picture or audio file as an  
attachment, highlight the attachment and press rto  
view the picture or play the audio file.  
Note: If your messages are threaded, options will include  
Delete Thread to delete all messages in the selected  
thread. To delete all unlocked messages, select  
Delete All.  
Note: Audio files in messages do not play if VibeAll is  
set to On.  
Forwarding  
1. Highlight or view a message and press />  
Forward.  
2. Address, edit, and send your message.  
Embedded objects and attachments are included  
when you forward a message.  
58  
           
To make a Talkgroup call to a Talkgroup ID in a message:  
Locking and Unlocking  
1. View the message.  
When you lock a message, it cannot be deleted until  
you unlock it.  
2. Highlight a Talkgroup ID and then press />  
Talkgroup.  
Highlight or view a message and press />  
Lock Message or Unlock Message.  
3. Press the DC button.  
Calling a Number in a Message  
Storing Message Information to Contacts  
If any field in a message contains a phone number,  
Direct Connect number, or Talkgroup ID, you can call  
or send a Call Alert to that number.  
If a message you receive contains a phone number,  
Direct Connect number, Talkgroup ID, or an email  
address in any of the fields, you can store this  
information to Contacts.  
To make a call to a number in a message:  
1. View the message.  
1. View the message.  
2. Highlight a number or email address and then  
2. Highlight a number and press `to make a  
phone call or press the DC button to make a Direct  
Connect call.  
press /> Save Number or Save Email.  
3. Select [New Contact] to store the number in a new  
entry, or select an entry to store the information to  
an existing entry.  
To send a Call Alert to a Direct Connect number in a  
message:  
4. With the Contacts type field highlighted, scroll left  
or right to display a Contacts type for the number  
or email address.  
1. View the message.  
2. Highlight a Direct Connect number and then press  
press /> Alert.  
5. Press Save (left softkey).  
3. Press the DC button.  
59  
   
Going to a Website  
Note: Most traditional phone-to-phone text messages arrive  
as MMS messages on your i890 phone. Your phone  
can send and receive MMS messages.  
If a message contains one or more Web addresses,  
you can go to the website.  
Your phone can receive SMS text messages, but it  
cannot send them.  
1. View the message.  
2. Highlight a Web address and then press />  
Go To Website.  
Accessing Text Messages  
Note: The entire Web address must appear in the message.  
When you receive a text message, you will see an  
alert. Press Read (left softkey) to display the  
message.  
Otherwise, you cannot go to the website.  
Saving Attachments or Embedded Files  
1. View a message.  
Caller ID Blocking  
2. Highlight an attachment or an embedded picture  
or audio file and then press /> Save Picture,  
Save Audio or Save Attachment.  
Caller ID allows people to identify a caller before  
answering the phone by displaying the number of the  
incoming call. If you do not want your number  
displayed when you make a call, follow these steps.  
Text Messaging (SMS)  
Per-Call Blocking  
With text messaging (SMS), you can receive instant text  
messages from another messaging-ready phone or  
from an email account.  
To block delivery of your number for a single phone call:  
Press *67before dialing the call.  
Your phone's SMS address is [email protected].  
Your PTN is your ten-digit Personal Telephone Number.  
60  
               
Your Nextel phone number cannot be blocked from  
calls made to 911, 800, 855, 866, 877, 888, or other  
toll-free phone numbers.  
To accept the second call and end the active call:  
1. Press @. Your phone rings with the second call.  
2. Answer the second call.  
Per-Line Blocking  
To decline the second call:  
You can request that Nextel Customer Service  
permanently block delivery of your phone number on  
every call you make. In this case, you may need to  
display your number for certain calls.  
Press No (right softkey). If you subscribe to  
voicemail, the call is forwarded to your voicemail  
box, unless you set Call Forward or If Busy to a  
different number.  
To show your number on a per-call basis:  
Turn Off Call Waiting  
Press *82before dialing the call.  
To turn off Call Waiting before a call:  
Press *70before dialing the call. Call Waiting  
is reactivated once the call ends.  
Call Waiting  
To turn off Call Waiting during a call:  
Press /> In Call Setup > Call Waiting > Off.  
Call Waiting lets you receive a second call while on an  
active call. Call Waiting is always available, unless you  
turn it off for a specific call.  
Tip: To turn Call Waiting back on while still on the call, set this  
If you are on a call and receive a second call, your  
phone emits a tone and displays a message.  
option to On.  
To accept the second call and put the active call on hold:  
Press Yes (left softkey).  
61  
     
1. During an active phone call, press /> 3 Way.  
(The first call is placed on hold.)  
Making a Second Call  
2. Enter a second phone number and press `.  
1. Place or receive a phone call.  
3. Press Join (right softkey).  
2. While the call is active, press /> 2nd Call. (The  
first call is placed on hold.)  
If one of the people you called hangs up during the  
call, you and the remaining caller stay connected. If you  
initiated the call and are the first to hang up, all callers  
are disconnected.  
3. Enter a second phone number and press `to  
place the call.  
Note: For quick ways to enter the number, press /.  
To merge two calls into a three-way call:  
To end the second call and make the on-hold call active:  
1. During an active phone call, press /> 2nd Call.  
(The first call is placed on hold.)  
Press @.  
To make the on-hold call active and put the active call on  
hold:  
2. Enter a second phone number and press `.  
3. Press /> Join.  
Press Switch (right softkey).  
Call Forwarding  
Making a Three-Way Call  
Call Forwarding lets you forward all your incoming calls  
to another phone number – even when your phone is  
turned off. You can continue to make calls from your  
phone when Call Forwarding is activated.  
With Three-Way Calling, you can talk to two people at  
the same time. When using this feature, the normal  
airtime rates will be charged for each of the two calls.  
62  
         
Call Forwarding sends calls to the phone numbers you  
specify. You can forward all calls to one number or  
forward missed calls to different numbers depending  
on the reason you missed the call.  
To forward all calls:  
1. Press /> Settings > Phone Calls > Call Forward >  
Forward > All Calls.  
2. Select To.  
Forwarding All Calls  
If you specified a forwarding number for all calls  
When you set your phone to forward all calls, an icon  
appears in the top row of the display:  
before, this number appears.  
To forward calls to this number, highlight it and  
press r.  
Phone line 1 is active; calls to phone line 1 are  
being forwarded.  
&
To delete this number, press rand then press  
and hold Delete (left softkey).  
Phone line 1 is active; calls to phone line 2 are  
being forwarded.  
)
3. To enter a forwarding number:  
Enter the number or press Search (left softkey),  
select Contacts, Recent Calls or Memo and then  
select a number.  
Phone line 1 is active; calls to phone lines 1 and 2  
are being forwarded.  
;
Phone line 2 is active; calls to phone line 1 are  
being forwarded.  
(
4. Press r. All your calls are now forwarded to the  
number you specified.  
Phone line 2 is active; calls to phone line 2 are  
being forwarded.  
*
Turning Off Call Forwarding  
Phone line 2 is active; calls to phone lines 1 and 2  
are being forwarded.  
<
1. Press /> Settings > Phone Calls > Call Forward >  
To.  
2. Set this option to Off.  
63  
       
All your calls are now sent to your phone.  
2. Select If Busy to specify a forwarding number for  
calls received when your phone is busy.  
Forwarding Missed Calls  
3. If you specified a forwarding number for this type  
of call before, this number displays.  
Calls you miss are forwarded according to the options  
set for missed calls. By default, missed calls are  
forwarded to voicemail.  
To forward calls to this number, highlight it, press  
r, and go to step 6.  
You can specify a forwarding number for each type of  
missed call:  
To delete this number, press r, and then press  
and hold Delete (left softkey).  
If Busy — Your phone is on a call or transferring data.  
4. To enter a forwarding number:  
If No Answer — You do not answer on the first four  
rings.  
Enter the number or press Search (left softkey),  
select Contacts, Recent Calls or Memo and then  
select a number.  
If Unreachable — Your phone is out of coverage or  
powered off.  
5. Press r.  
Note: You are charged a higher rate for calls you have  
6. Repeat step 2 through step 5 for If No Answer and  
If Unreachable.  
forwarded.  
To forward missed calls:  
7. When you are finished, press Back (right softkey).  
1. Press /> Settings > Phone Calls > Call Forward >  
Forward > Detailed.  
Note: If your phone is set to forward all calls, you must first  
turn off call forwarding to access this option. (See  
64  
   
number. Relay service works through a  
Making International Calls  
Communications Assistant who reads messages typed  
into a TDD/TTY device by a speech or hearing  
impaired individual to you. The Communications  
Assistant then types your spoken messages to the  
hearing or speech impaired individual.  
Your service default is “International Calls Restricted.”  
Contact Nextel Customer Service to obtain  
international dialing access.  
Calls placed between the United States and Canada  
do not require an international access code.  
Telecommunications Relay Service is available 24  
hours a day, seven days a week, and every call is  
strictly confidential.  
Special Dialing Codes  
Note: Using 711 to reach Telecommunications Relay Service  
may not be available in all areas.  
Non-Emergency Numbers  
The TTY device must be connected to the phone  
through the micro USB port. A 2.5 mm to micro USB  
adapter is required to support TTY.  
Nextel supports many “non-emergency” numbers  
(such as #77, 311, and 511) provided by local and state  
governments. These numbers are used to report  
non-emergency incidents. If the situation includes  
imminent danger or loss of life, you should dial 911.  
To enable TTY mode:  
1. Press /> Settings > Phone Calls > TTY > Use TTY.  
2. Select On to enable TTY mode.  
Telecommunications Relay Service  
3. For TTY options, highlight Type, press rand then  
select an option:  
Nextel supports services for communicating with  
speech and/or hearing impaired individuals. You can  
dial 711 to reach a local Telecommunications Relay  
Center. You will then be connected to your destination  
TTY – Type and read text on your TTY device.  
VCO (Voice Carry-Over) – Speak into the phone  
and read text replies on your TTY.  
65  
           
HCO (Hearing Carry-Over) – Type text on your  
TTY and listen to voice replies on your phone.  
Choose a Second Line Service plan that fits your  
needs.  
In order to activate Second Line Service, contact your  
Nextel Sales Representative or call Nextel Customer  
Service.  
Nextel Phone Services  
Contact Nextel Customer Service to obtain these  
services or for additional information.  
To set the active line (primary or alternate):  
1. Press /> Settings > Phone Calls > Set Line.  
2. Select a phone line to be active.  
Note: Some services are not available outside of the  
continental United States.  
When incoming calls are made to a non-active line,  
they will be sent to voicemail without ringing. (See “Call  
Second Line Service  
You can have two different phone numbers on the  
same phone. With Second Line Service, you can:  
Sprint 411  
Get separate bills for each phone line.  
Dial 411 from your wireless phone to receive  
Bring in an existing wireless or home phone number  
to Nextel to activate on the second line.  
nationwide listings, movie listings and showtimes,  
restaurant reservations, and driving directions, as well  
as sports scores, stock quotes, and weather conditions.  
Spanish speaking operators available. Receive up to  
three phone numbers or pieces of information per call,  
and be automatically connected at no additional  
charge. Airtime and other charges apply.  
Have two different area codes (must be in same  
market) to convey a local image to callers.  
Use different ringer styles so that you can tell which  
line is receiving a call.  
Forward incoming calls to either your primary or  
alternate line phone number.  
66  
 
Options available under the home page include:  
Business Tools – Provides access to business tools.  
Text Messaging – Provides access to text messaging.  
5. Data Services  
Games, Ringers, & More – Provides access to  
downloadable items.  
News, Sports & More – Lets you access news  
services.  
NASCAR –Gives you access to NASCAR news and  
stats and provide a link to download NASCAR Sprint  
Cup Mobile.  
Wireless Data Services  
Email & IM – Allows you to send email and IMs.  
With Web access on your phone, you can browse your  
favorite websites, making it easier than ever to stay  
informed while on the go. Follow sports scores,  
breaking news, and weather, and shop on your phone  
anywhere on the Nextel National Network.  
Your Bookmarks – Allows you to access and manage  
your bookmarks.  
Search – Launches a Web search.  
Go to URL – Lets you enter website addresses.  
Using the Web Browser  
My Account – Lets you configure and manage your  
browser settings.  
Navigating the Web from your phone is easy once you  
get the hang of it.  
Help – Displays online help.  
Tip: To go back one page, press the *key .  
Opening the Browser  
To access the browser menu options, press and hold /  
from any Web page.  
Press L(the Web key).  
67  
               
Going to a Specific Website  
Note: Bookmarking a page does not store the page contents,  
just its address.  
To go to a particular website by entering a Web address  
(URL):  
Some pages cannot be bookmarked. Whether a  
particular Web page may be marked is controlled by its  
creator.  
1. From the home page, select Go to URL.  
2. Press Edit (left softkey).  
Accessing a Bookmark  
3. Use your keypad to enter the Web address and  
press Done (left softkey).  
1. Press and hold /to open the browser menu.  
2. Select View Bookmarks.  
4. Press Options (right softkey) > accept to go to the  
website.  
3. Highlight a bookmark and press r(or press the  
number corresponding to the bookmark).  
Note: Not all websites are viewable on your phone.  
Tip: To return to the home page from any other Web page,  
Creating a Bookmark  
press @.  
Bookmarks allow you to store the address of your  
favorite websites for easy access at a later time.  
Reloading a Web Page  
1. Go to a Web page and press and hold /to open  
1. Press and hold /to open the browser menu.  
the browser menu.  
2. Select Refresh this page. (The browser will reload  
the current Web page.)  
2. Highlight Mark this page and press r.  
3. Confirm or edit the bookmark name, scroll to the  
bottom of the screen, and then press Done (left  
softkey) to save the bookmark.  
68  
         
Restarting the Web Browser  
Downloading Content  
If the Web browser seems to be malfunctioning or  
stops responding, you can usually fix the problem by  
simply restarting the browser.  
Your phone arrives with Java applications and games  
loaded and ready to install. You can download and  
install more Java applications. For more information on  
1. Press and hold /to open the browser menu.  
2. Select More... > Restart Browser.  
Check the Games, Ringers & More menu option for a  
catalog of items available for purchase and download.  
You can also go to www.nextel.com and sign on to your  
account for a wide selection of available Java  
applications and downloading instructions.  
Note: Using Java applications may cause your phone’s  
battery power to deplete more quickly.  
69  
               
Sound Settings  
6. Settings  
Ring Tones  
Your phone provides a variety of ringer options that  
allow you to customize your ring and volume settings.  
These options allow you to identify incoming calls and  
messages by the ring.  
Selecting Ringer Types  
1. Press /> Multimedia > Ring Tones.  
2. Scroll through the list of ring tones. A sample  
ringer will sound as you highlight each option.  
3. Press ror press Assign (left softkey).  
4. Select the function(s) to which to assign the current  
ringer by highlighting the option and pressing r.  
(A check mark appears next to selected options.)  
5. When you are finished, press Done (left softkey) to  
assign the ringer to the selected function(s).  
70  
           
Assigning a Ring Tone to a Contact  
Downloading More Ring Tones  
You can also assign a ringer to a specific contact entry  
so you know who's calling without looking at the  
phone.  
To use other ring tones, you can download them into  
your phone for a fee.  
Press /> Multimedia > Ring Tones >  
1. Press /> Multimedia > Ring Tones.  
Buy Ring Tones.  
2. Scroll through the list of ring tones and select one.  
A sample ringer will sound as you highlight each  
option  
Note: Ring tones may be downloaded only once. If you  
delete a ring tone from your phone and wish to  
reassign it, you must purchase it again.  
3. Press ror press Assign (left softkey).  
Managing Memory  
4. Select A Contact....  
To view the amount of memory available for custom ring  
tones:  
5. Highlight a Contacts entry and press rto assign  
the ringer.  
1. Press /> Multimedia > Ring Tones.  
Viewing Ring Tone Assignments  
1. Press /> Multimedia > Ring Tones.  
2. Make sure Vibrate All is set to Off.  
2. Make sure Vibrate All is set to Off.  
3. Highlight any ring tone and press />  
Memory Usage.  
Deleting custom ring tones frees memory.  
3. Highlight any ring tone and then press />  
Overview.  
Deleting Ring Tones  
4. Scroll to view ring tones assigned to features and  
Contact entries.  
Deleting a ring tone from the list deletes it from your  
phone.  
71  
   
In most cases, when you delete a ring tone that you  
purchased from your phone, you will have to purchase  
it again.  
Press /> Multimedia > Ring Tones > Vibrate All.  
Set this option to On or Locked.  
Tip: Setting this option to Locked requires you to press and  
hold the volume control up to turn Vibrate All off. The  
Locked option helps prevent you from accidentally  
turning Vibrate All off.  
To delete a ring tone:  
1. Press /> Multimedia > Ring Tones.  
2. Make sure Vibrate All is set to Off.  
3. Highlight a ring tone and press /> Delete.  
4. Press Yes (left softkey) to confirm.  
To deactivate Vibrate All:  
1. Press and hold the volume key up to unlock  
vibrate all.  
2. Press the volume key up repeatedly to select a  
volume level or press /> Multimedia >  
Ring Tones > Vibrate All > Off.  
Vibrate Settings  
Vibrate All  
These icons indicate how the ringer is set:  
The Vibrate All option allows you to be notified of calls  
and messages with a vibration instead of an audible  
alert.  
The phone always vibrates instead of  
making a sound.  
/
To activate Vibrate All:  
The phone vibrates instead of making a  
sound for phone calls.  
.
Press and hold the volume button down in standby  
mode. (Pressing and holding displays “VibeAll:  
On.” Continuing to hold the button down displays  
“VibeAll: Locked.”)  
Direct Connect calls, Group Connect calls,  
and Talkgroup calls are heard through the  
earpiece, not the speaker.  
"
– or –  
72  
     
Silence All  
The phone vibrates then rings for all calls.  
The ring volume is set to zero for all calls.  
/
The Silence All option allows you to mute all sounds  
without turning your phone off.  
,
Ring and Vibrate  
To activate Silence All:  
To set your phone to ring and vibrate when you receive  
phone calls or Call Alerts:  
With the phone in standby mode press and hold  
the volume key down until the ringer level is set  
at 0. (The screen will display ,.)  
1. Press /> Multimedia > Ring Tones.  
2. Make sure Vibrate All is set to Off.  
3. Scroll through the list and select a ring tone.  
4. Press /> Assign w/Vibe.  
To deactivate Silence All:  
Press the volume key up repeatedly to select a  
volume level.  
To set your phone to vibrate instead of making a sound for  
some features but not others:  
5. Select Phone Line 1 and/or Phone Line 2 and press  
Done (left softkey).  
1. Press /> Multimedia > Ring Tones.  
2. Make sure Vibrate All is set to Off.  
3. Select Vibrate from the list of ring tones.  
This icon/appears on the display.  
Note: You can also set 3D sound effects settings in the Ring  
Tones menu (/> Multimedia > Ring Tones >  
3D Effect) or when assigning a ring tone.  
4. Select the feature(s) to which to assign Vibrate and  
press Done (left softkey).  
Note: To set ring options for Direct Connect calls, Group  
Connect calls, and Talkgroup calls, see “Vibrate  
73  
   
Adjusting the Phone’s Volume Settings  
Display Settings  
Adjust your phone’s volume settings to suit your needs  
and your environment.  
Changing the Backlight Time Length  
1. Press /> Settings > Volume.  
Select how long the display screen and keypad remain  
backlit after any keypress is made.  
2. Select Ringers/Alerts, Speaker, Earpiece, Multimedia  
or Keypad.  
1. Press /> Settings > Display/Info > Backlight.  
3. Choose a volume level and press r.  
2. Highlight an option, press r, and then choose a  
setting.  
Tip: You can adjust the ringer volume in standby mode (or  
the earpiece volume during a call) by using the volume  
key on the left side of your phone.  
For Timer or Java Timer, select a time.  
Note: Long backlight settings reduce the battery’s talk and  
standby times.  
Beep  
Set your phone to alert you with an audible tone once  
a minute during a voice call.  
Changing the Display Screen  
Choose what you see on the internal or external  
display screen while powering on or off and when in  
standby mode.  
1. Press /> Settings > Phone Calls > Minute Beep.  
2. Highlight On or Off and press r.  
1. Press /> Settings > Display/Info > Wallpaper >  
Internal or External.  
74  
         
2. Select an image and press View (left softkey) to view  
it. Press Back (right softkey) to return to the  
available images.  
List View to display the menu as a list.  
Tab View to display the menu as a row of icons on  
the bottom of the screen.  
3. Press rto assign an image.  
Changing the Theme  
Setting Wallpaper to Change Automatically  
Customize your phone’s display appearance by  
selecting a theme to reflect your personality.  
When you set your wallpaper to change automatically,  
your phone uses each of the pictures in Media Center  
as wallpaper, cycling through them at a pace you  
choose.  
1. Press /> Settings > Display/Info > Theme.  
2. Highlight an option and press r.  
1. Press /> Settings > Display/Info > Wallpaper >  
Internal or External > Auto Cycle.  
Changing the Clock Display  
Select a format for the time and date display and  
choose whether the time and date appear in standby  
mode.  
2. Select how frequently the wallpaper will change  
then press r.  
Changing the Phone’s Menu Style  
1. Press /> Settings > Display/Info > Clock.  
Choose how your phone’s menu is displayed on the  
screen.  
2. Select Display On/Off, Time Format or Date Format  
and then press r.  
1. Press /> Settings > Display/Info > Menu View.  
3. Highlight an option and press rto apply the  
setting.  
2. Highlight an option and press r.  
Note: The year is set by the network, and even though it is an  
Icon View to view the main menu as a grid of  
icons. Icons animate when they are highlighted.  
option, it cannot be changed.  
75  
   
Setting Message Notification  
Changing the Text Size  
When you receive a message, your phone notifies you  
by displaying an icon on your display screen. You can  
also choose to be notified with a sound while making a  
phone call.  
Adjust the font when entering text (for example, when  
using the notepad or when adding a Contacts entry).  
1. Press /> Settings > Display/Info > Text Size.  
1. Press /> Settings > Phone Calls > Notifications.  
2. Highlight an option and press r.  
2. Highlight Receive All, Messages Only or Delay All  
and press r.  
Messaging Settings  
Note: Delay All is the default setting.  
Staying connected to your friends and family has never  
been easier. With your phone’s advanced messaging  
capabilities, you can send and receive many different  
kinds of text messages without placing a voice call.  
(For more information see “Multimedia Messages  
Tip: To set notification options during a call press />  
In Call Setup > Notifications.  
Customizing MMS  
The Setup menu lets you customize MMS for your  
phone:  
Messaging settings make messaging easier by letting  
you decide how you would like to be notified of new  
messages, create a signature with each sent message,  
and create your own preset messages.  
Signature — Enter text here to create a signature that  
is automatically inserted at the end of each message.  
Quick Notes — lets you create new Quick Notes and  
edit or delete Quick Notes you have created.  
Cleanup — controls how long messages remain in  
the Inbox and Sent Items before they are deleted.  
76  
         
Report Default — allows you to set the default for the  
Delivery Report Option to on or off.  
Quick Notes and Reply Phrases  
To add a Quick Note or Reply phrase:  
Memory Size — displays a report on phone memory.  
1. From the Setup menu, select Quick Notes or  
MMS Setup > Replies.  
MMS Setup — allows you to set up the following:  
Friendly Name — lets you enter the name  
displayed in the From field on messages you  
send.  
2. Select [New Quicknote] or [New Reply], or press  
New (left softkey).  
3. Enter text and press r.  
Download Options — lets you control message  
downloads. Automatic downloads messages  
automatically. Manual requires you to reply to a  
prompt before messages download to your  
phone.  
To edit a Quick Note or reply phrase:  
1. From the Setup menu, select Quick Notes or  
MMS Setup > Replies.  
2. Select a Quick Note or reply phrase you have  
created.  
Replies — lets you create new reply phrases and  
edit or delete reply phrases you have created.  
3. Edit the text and press r.  
To access the Setup menu:  
To delete a Quick Note or reply phrase:  
1. Press /> Messages.  
1. From the Setup menu, select Quick Notes or  
2. Highlight [Create Message] and press /> Setup.  
MMS Setup > Replies.  
Tip: This option is available from many context-sensitive  
menus when you are using MMS.  
2. Highlight a Quick Note or reply phrase you have  
created.  
3. Press Delete (left softkey) and then press ror  
press Yes (left softkey) to confirm.  
77  
     
1. Press /> Messages > /> Setup > Signature. If  
you do not wish to attach a signature to your  
outgoing messages, press Delete (left softkey).  
Note: You can edit or delete all Quick Notes. You can only  
edit or delete Reply phrases that you created.  
Setting the Cleanup Option  
2. Enter a signature and press r. (See “Entering  
The cleanup option controls how long messages  
remain in the Inbox and Sent Items before they are  
deleted. You set the cleanup option for the Inbox and  
Sent Items separately.  
Airplane Mode  
Sometimes you may want to have your phone on, but  
turn off its ability to make and receive calls and other  
transmissions.  
The cleanup option deletes only read, unlocked  
messages.  
To set the cleanup options:  
To set your phone so that it cannot make or receive phone  
calls, Direct Connect calls, Group Connect calls, Talkgroup  
calls, or transfer data:  
1. From the Message Center, press /> Setup >  
Cleanup > Inbox or Sent Items.  
2. Choose a cleanup option.  
1. Press /> Settings > Advanced > Transmitters.  
2. Highlight Off and press r.  
3. To automatically delete messages now, press r  
or press Yes (left softkey). To delete messages later,  
press No (right softkey).  
3. Press Yes (left softkey).  
When in Transmitters Off mode, your phone’s standby  
screen displays “Transmitters Off.”  
Adding a Customized Signature  
Add a customized signature to each message you  
send.  
Note: While powering on your phone, you can turn  
transmitters off by pressing @for more than five  
seconds.  
78  
               
To restore your phone’s ability to do all these things:  
Headset Options  
Set this option to On and then press Yes (left  
softkey).  
To set your phone to send incoming sound to a headset  
only, or to a headset and a speaker at the same time:  
Note: When Transmitters is set to Off, your phone’s Bluetooth  
capability is disabled, and all active Bluetooth  
connections are dropped.  
1. Press /> Settings > Advanced > Headset/Spkr.  
2. Select HdsetOnly to send incoming sound to the  
headset only.  
Setting One Touch Direct Connect  
– or –  
Select Hdset&Spkr to send incoming sound to the  
headset and ring tones to the speaker.  
One Touch Direct Connect sets your phone to call the  
most recent Direct Connect number or Group on the  
Recent Calls list, or a Direct Connect number you  
choose, every time you press the DC button.  
Profiles  
1. Press /> Push To Talk > PTT Options >  
One Touch DC.  
A profile is a group of settings saved together so that  
you can apply them to your phone easily.  
2. Highlight Off, Quick PTT, Last Call, Assigned  
Number, Send Picture, Send My Info or Send Contact  
and press r.  
Your phone arrives with preset profiles. You can also  
create your own profiles.  
Tip: If you are entering a Talkgroup number, enter # before  
Viewing Profiles  
the number.  
To view the profiles stored in your phone:  
1. Press /> Tools > Profiles.  
79  
               
2. Highlight a profile and press View (left softkey).  
Creates a temporary profile that contains these  
changes.  
Tip: The profile that is currently in effect on your phone has a  
checkmark next to it.  
To set your phone to create a temporary profile that  
contains changes you make to settings:  
3. Scroll to view settings.  
1. Press /> Tools > Profiles.  
Switching Profiles  
2. Press /and then select Setup > Temp Profile.  
3. Set this option to On.  
1. Press /> Tools > Profiles.  
2. Highlight a profile and press r.  
The profile you selected is now in effect.  
To set your phone to update the profile in effect to reflect  
any changes you make to settings:  
Set Temp Profile to Off in step 3 above.  
How Changing Settings Affects Profiles  
Temporary Profiles  
Many of the settings contained in profiles can be set  
without switching or editing profiles — for example, by  
selecting Settings or Ring Tones to set options, or by  
setting the volume of the phone’s ring using the  
volume controls.  
If your phone is set to create temporary profiles, a  
temporary profile is created when you make changes  
to settings without switching or editing profiles. These  
stay in effect until you switch profiles or power off your  
phone.  
When you do this, your phone either:  
Updates the profile in effect to reflect these changes,  
without notifying you.  
Temporary profiles and any settings you have changed  
are marked with asterisks (*).  
– or –  
80  
   
r. If you do not choose a profile to copy from, the  
new profile is based on a default profile.  
Storing a Temporary Profile  
To store a temporary profile as a new profile:  
1. Press /> Tools > Profiles.  
4. Press Create (left softkey).  
5. Scroll through the list of options and set their  
values.  
2. Highlight the temporary profile and press />  
Store As New.  
6. When you are finished, press Done (right softkey).  
3. Enter a name and press r.  
Editing Profiles  
To overwrite the profile the temporary profile is based on:  
1. Press /> Tools > Profiles.  
1. Press /> Tools > Profiles.  
2. Highlight the temporary profile, press  
/> Store Changes, and then press Yes  
(left softkey).  
2. Highlight a profile, press /and then select Edit.  
3. Scroll through the list of options and set their  
values.  
Note: The temporary profile is stored with the name of the  
profile it is based on. The profile it is based on, as it  
existed before you made changes to settings, is gone.  
4. When you are finished, press Done (right softkey).  
Deleting Profiles  
Creating Profiles  
To delete a profile:  
1. Press /> Tools > Profiles.  
1. Press /> Tools > Profiles > [New Profile].  
2. Highlight a profile, press /, and then select  
2. Enter a name and press r.  
Delete.  
3. To base this profile on an existing profile, select  
Copy From and then highlight a profile and press  
3. Press ror press Yes (left softkey).  
81  
     
To delete all profiles:  
DC/GC – sets filtering options for Direct Connect  
calls and Talkgroup calls.  
1. Press /> Tools > Profiles.  
Off – notifies you of all DC and Talkgroup calls.  
2. Press /and then select Delete All.  
3. Press ror press Yes (left softkey) to confirm.  
On – ignores all DC and Talkgroup calls.  
Group – sets filtering options for Group Connect  
calls.  
Setting Call Filtering  
Off – notifies you of all Group Connect calls.  
The call filtering setting in each profile lets you control  
which calls, Call Alerts, and message notifications your  
phone notifies you of, and which it ignores.  
On – ignores all Group Connect calls.  
Alerts – sets filtering options for Call Alerts.  
Off – notifies you of all Call Alerts.  
1. While setting options for a profile, select Call Filter.  
On – ignores all Call Alerts.  
2. Select a filtering option  
Notifications – sets filtering options for message  
notifications.  
Phone – sets filtering options for phone calls.  
Off – notifies you of all calls.  
Off – notifies you of all messages.  
Voice Messages – ignores all voice messages.  
Text Messages – ignores text messages.  
All – ignores all messages.  
All – ignores all calls.  
All Contacts – notifies you only of calls from  
Contacts.  
Some Contacts – notifies you only of calls from  
selected Contacts. Select up to five Contacts  
entries. When you are finished, press Done  
(right softkey).  
Note: The message notification screen still appears when you  
receive a message you have set not to sound a tone or  
vibrate.  
3. Press Done (right softkey).  
82  
 
5. To record a voice name for the shortcut, select  
Voice (optional). Follow the prompts to say and  
repeat the name. Speak clearly into the  
microphone.  
Phone Setup Options  
Shortcuts  
6. Press Done (left softkey).  
Your phone offers you the option of assigning shortcuts  
to favorite or often-used functions. Pressing the /key  
in standby mode followed by the assigned shortcut key  
will launch your personally designated shortcuts.  
7. If the number key you select is already assigned to  
a shortcut, a prompt appears asking to replace the  
existing shortcut.  
Press Yes (left softkey) to replace the existing  
shortcut.  
Creating a Shortcut  
Note: When you receive your phone, all number keys may  
already be assigned to shortcuts. If this is the case, you  
can create new shortcuts by deleting or replacing  
existing shortcuts.  
Press No (right softkey) to keep the existing  
shortcut and assign another number key.  
Using a Shortcut  
1. Go to a menu item.  
To access a shortcut using the shortcut number:  
1. From standby mode, press /.  
For example, to create a shortcut to the screen for  
creating a new Contacts entry: Press />  
Contacts and then highlight [New Contact].  
2. On your keypad, press the number assigned to the  
shortcut.  
2. Press and hold /until a confirmation screen  
appears.  
To view a list of your shortcuts:  
3. Press ror press Yes (left softkey).  
Press /> Settings > Personalize > Shortcuts.  
4. Press a number key for the shortcut and press r.  
83  
       
Editing a Shortcut  
Deleting Shortcuts  
To change the order of shortcuts:  
To delete a shortcut:  
1. Press /> Settings > Personalize > Shortcuts.  
2. With any shortcut highlighted, press /> Reorder.  
1. Press /> Settings > Personalize > Shortcuts.  
2. Highlight a shortcut and press /> Delete.  
3. Press ror press Yes (left softkey) to confirm.  
To delete all shortcuts:  
3. Highlight the shortcut you are moving and press  
Grab (left softkey).  
4. Scroll to a new location and press Insert (left  
1. Press /> Settings > Personalize > Shortcuts.  
softkey).  
2. With any shortcut highlighted, press />  
Delete All.  
5. Repeat step 2 through step 4 for all the items you  
are moving.  
3. Press ror press Yes (left softkey) to confirm.  
6. Press Done (right softkey).  
To change the number or voice name assigned to a  
shortcut:  
1. Press /> Settings > Personalize > Shortcuts.  
2. Highlight any shortcut and press Edit (left softkey).  
3. With Key or Voice highlighted, press rto change  
assignments.  
4. Press Done (left softkey).  
84  
   
Carousel  
Personalize  
Carousel is an iconic list of application shortcuts  
displayed horizontally at the bottom of the display in  
standby mode that allows you to access a total of nine  
applications.  
In addition to Shortcuts, the Personalize menu gives  
you other options to access menu items easily.  
Press /> Settings > Personalize, select an option,  
and set your preferences.  
To scroll through the list of icons, press the navigation  
key right or left to highlight an icon, and press rto  
select the icon.  
Reorder Menu to change the main menu order.  
Up Key, Down Key, Left Softkey, Right Softkey, to  
set one-touch menu access from the standby  
screen.  
Configuring Auto Hide Settings  
Press /> Settings > Personalize > Carousel >  
Auto Hide.  
Power Up to set the menu item displayed when  
you power on your phone. (Default Ready starts in  
standby mode.)  
Select from Always On, 2 sec, 4 sec, or 8 sec.  
Note: Carousel will not time out if Always On is selected.  
Call Answer Mode  
Assigning Carousel Applications  
Select how to answer incoming calls on your phone.  
1. Press /> Settings > Phone Calls.  
1. Press /> Settings > Personalize > Carousel.  
2. Assign applications to Left 1, Left 2, Left 3, Left 4,  
2. Highlight an option and press r.  
Center, Right 1, Right 2, Right 3, and Right 4.  
Any Key Ans: Select On to allow you to answer an  
incoming call by pressing any key.  
3. Press rto assign the applications.  
– or –  
85  
         
Select Off to require you to press `to answer all  
incoming calls.  
Setting Prepend Dialing  
The Prepend feature lets you set a prefix to be added to  
the beginning of all dialed numbers, such as a country  
code for international calls.  
Auto Ans to set your phone to automatically  
answer an incoming call after a specified number  
of rings when connected to a headset or  
hands-free car kit.  
1. Press /> Settings > Phone Calls > Prepend.  
Off to disable Auto-Answer.  
2. Select Prepend > On.  
1 Ring, 2 Rings, 3 Rings or 4 Rings to answer  
calls automatically when the phone is  
connected to a hands-free car kit or a headset  
(sold separately). In Auto-Answer mode, your  
phone will answer calls even if you are not  
present.  
3. Enter a prefix in the Number field (such as +1 for  
international calls) and then press r.  
To deactivate this feature, select Off during step 2  
above.  
Note: This setting does not apply to 911 or Sprint 411.  
Flip Activation to set your phone to answer calls by  
opening the phone (Flip To Ans) and end calls by  
closing the phone (Flip To End).  
Resetting Your Phone  
Resetting Phone Settings  
Display Language  
Resetting phone settings restores all the factory  
defaults, including the ringer types and display settings.  
The Recent Calls, Scheduler, and all text messages will  
be erased. Contacts are not affected.  
You can choose to display your phone’s onscreen  
menus in several languages.  
1. Press /> Settings > Display/Info > Language.  
2. Highlight English, Español, Português, Français or  
Automatic and press r.  
86  
     
1. Press /> Settings > Advanced > Reset Defaults >  
Reset Settings.  
GPS Privacy Options  
Your phone’s GPS privacy options control whether Java  
applications or other software applications on your  
phone may view the location of your phone. You may  
set your phone to one of these GPS privacy options.  
2. Enter your phone’s six-digit security code and  
press Ok (left softkey). (A disclaimer is displayed.)  
Note: Your security code is a six-digit number used for  
resetting your phone. Please contact Nextel Customer  
Service if you do not know your security code.  
Note: Privacy options do not apply to the transmission of  
location information during emergency 911 calls.  
3. Read the prompt and press Yes (left softkey) to  
complete the reset. (Press No [right softkey] to  
cancel.)  
To set your GPS privacy options:  
1. Press /> Tools > GPS > Privacy.  
2. If your GPS PIN security feature is enabled, enter  
Feature” on page 88. for more information.)  
Resetting All  
Selecting Reset All resets phone settings and clears all  
phone data, including Contacts, History, Scheduler, and  
Messaging.  
3. Select a privacy option:  
Restricted — No Java or similar software  
applications may view the location of your phone.  
However, location information may still be  
available to the phone’s owner, fleet manager, or  
account administrator.  
1. Press /> Settings > Advanced > Reset Defaults >  
Reset All.  
2. Enter your security code and press Ok (left  
softkey).  
3. Read the prompt and press Yes (left softkey) to  
complete the reset. (Press No [right softkey] to  
cancel.)  
Unrestricted — All applications may view the  
location of your phone, without notifying you.  
87  
     
By Permission — When an application attempts to  
view the location of your phone, you will be  
prompted to give permission. However, location  
information may still be available to the phone’s  
owner, fleet manager, or account administrator.  
To change your GPS PIN:  
1. Press /> Settings > Security >  
Change Passwords > GPS PIN.  
2. Enter the current GPS PIN and press Ok (left  
softkey).  
Setting the GPS PIN Security Feature  
3. Enter the new GPS PIN and press Ok (left softkey).  
To prevent your GPS privacy settings from being  
altered without your knowledge, your GPS privacy  
option can be protected by a PIN.  
4. Reenter the new GPS PIN to confirm and then  
press Ok (left softkey).  
When you receive your phone, the GPS security feature  
is turned off, so you do not have to enter a GPS PIN to  
access your GPS privacy options. If you turn this  
feature on, you will be required to enter a GPS PIN to  
access your GPS privacy options.  
Java Applications & GPS Security  
Some Java applications can make use of your phone’s  
GPS feature to determine the approximate  
geographical location of your phone. (See “GPS  
Enabled” on page 114 for more information on the GPS  
feature.) However, for privacy reasons, you may not  
always want Java applications to access the location of  
your phone. Your phone protects your privacy by giving  
you the option to block all or some Java applications  
from accessing the location of your phone.  
To turn the GPS Enabled security feature on or off:  
1. Press /> Settings > Security > GPS PIN.  
2. Select On or Off.  
3. Enter the current GPS PIN.  
Tip: The default GPS PIN is 0000.  
Setting Privacy for All Java Applications  
4. Press Ok (left softkey).  
on setting the privacy options for your java applications.  
88  
     
These options control the privacy of all Java  
applications on your phone.  
3. Press /> Permissions.  
4. Select privacy options for this application (you may  
set them for each of the menus available under  
Permissions):  
Granting or Denying Permission  
When a java application requests access to the  
location of your phone, a screen appears informing  
you.  
Always — The application always has permission  
to access the phone’s location without notification.  
Ask — When the application requests access to  
the phone’s location, you are prompted to grant  
or deny permission (see “Granting or Denying  
Permission” on page 89).  
To grant or deny a request:  
1. Press Grant (left softkey) or Deny (right softkey) to  
grant or deny a request.  
Never — Requests for location are denied without  
notification.  
2. Select Always to always take this action for the  
application, For this session to keep this action  
without notification until the phone is powered off,  
or Only Once to take this action for this instance  
only (you will be prompted again for subsequent  
requests).  
PTT Options Menu  
The PTT Options menu controls how your phone  
handles Direct Connect calls, Group Connect calls, and  
Talkgroup calls.  
Setting Privacy for Each Java Application  
1. Press /> Games and Apps.  
To access the PTT Options menu:  
2. Highlight an application or suite of applications.  
Press /> Push To Talk > PTT Options.  
Tip: If the application has requested access to the location of  
your phone, this icon fappears when you highlight the  
application.  
Tkgrp Silent — controls whether you hear your  
Talkgroup calls.  
89  
           
Tkgrp Area — lets you define your Talkgroup area.  
Security Settings  
One Touch DC — sets One Touch Direct Connect.  
Alert Type — controls how your phone notifies you  
when you receive Direct Connect calls, Group  
Connect calls and Talkgroup calls.  
SIM Card Security  
Important: Except for making emergency calls, your phone  
does not function without the SIM card.  
On/Off Settings — sets your phone’s ability to send  
and receive pictures in Direct Connect calls. See  
SIM Card’s PIN  
You can protect access to your phone by using the SIM  
card’s PIN (Personal Identification Number). When you  
enable SIM PIN, you must enter the PIN each time you  
power up the phone. You can change or disable the  
SIM PIN.  
Store Received Info — lets you specify a prefix,  
such as a country code for international calls, to  
be automatically added to phone numbers you  
receive in My Info from other phones, when you  
store the My Info to Contacts. Select Prefix to enter  
the prefix to be added. Set Add Prefix to Ask Me to  
set your phone to display a prompt asking you  
whether to add the prefix as you save My Info  
from other phones to Contacts.  
Turning SIM PIN On and Off  
1. Press /> Settings > Security > SIM PIN.  
2. Select On or Off.  
3. Enter the current SIM PIN.  
PTT Backlight — controls whether or not the  
backlight displays when using Direct Connect.  
Important: The default SIM PIN is 0000. Change your PIN to  
prevent fraudulent use of the SIM Card.  
4. Press Ok (left softkey).  
90  
         
Entering the PIN  
Code (PUK). Follow their instructions for unblocking  
your SIM PIN.  
1. Press and hold @to turn on your phone.  
Important: If you unsuccessfully enter the PUK code ten  
times, your SIM card is permanently blocked and  
must be replaced. If this happens, you get a  
message to contact Nextel Customer Service.  
Except for making emergency calls, your phone  
does not function with a blocked SIM card.  
2. When the SIM PIN screen appears, enter your  
SIM PIN and press Ok (left softkey).  
Important: If you enter your PIN incorrectly three times, your  
SIM card is blocked. See “Unblocking the PIN”  
on page 91.  
Changing the PIN  
Your Phone’s Lock Feature  
Note: SIM PIN must be turned on in order to access this  
feature.  
Locking Your Phone  
1. Press /> Settings > Security >  
When your phone is locked, you can only make calls to  
911. To lock and unlock your phone, you must enter  
your phone’s four-digit lock code. If you do not know  
your phone’s lock code, try 0000; if this does not work  
contact Nextel Customer Service for assistance.  
Change Passwords > SIM PIN.  
2. Enter the current SIM PIN and press Ok (left  
softkey).  
3. Enter the new SIM PIN and press Ok (left softkey).  
1. Press /> Settings > Security.  
4. Reenter the new SIM PIN to confirm and then  
press Ok (left softkey).  
2. Select Phone Lock > Lock Now, enter the unlock  
code, and press Ok (left softkey). (To set your  
phone to lock the next time it is turned on, select  
Auto Lock.)  
Unblocking the PIN  
If you enter your PIN incorrectly three times, your SIM  
card is blocked. To unblock your SIM card, you must  
contact Nextel Customer Service to get a PIN Unblock  
91  
   
Unlocking Your Phone  
Locking Your Keypad  
At the “Enter Unlock Code” prompt, enter your  
unlock code and press Ok (left softkey).  
When your phone is closed and in standby mode, your  
keypad locks to prevent accidental key presses.  
To lock your keypad, press /*.  
Changing the Lock Code  
Unlocking Your Keypad  
1. Press /> Settings > Security >  
Change Passwords.  
To unlock your keypad, press /*.  
2. Select Unlock Code then enter your current unlock  
code and press Ok (left softkey).  
3. Enter and reenter your new lock code, pressing  
Ok (left softkey) after each.  
Calling in Lock Mode  
You can place calls to 911 when in lock mode.  
To call an emergency number, dial 911and  
press `.  
92  
         
Duplicate calls (same number and type of call) may  
only appear once on the list.  
7. Recent Calls  
When you select a call to view its details, you see  
information such as the name associated with the call,  
the number, date, time, and duration of the call.  
Note: The Recent Calls list records only calls that occur while  
the phone is turned on. If a call is received while your  
phone is turned off, it will not be included in the phone’s  
Recent Calls list.  
If you return a call from the voicemail menu, it will not be  
included in your phone’s Recent Calls list.  
Calls and Call Alerts  
About Recent Calls  
If the number of a recent call is stored in Contacts, the  
following information appears:  
The Recent Calls list displays the last 20 numbers (or  
Contacts entries) for calls you placed, accepted, or  
missed, and for Call Alerts you have received. It also  
displays My Info and contact information sent to you  
from other phones. It is continually updated as new  
numbers are added to the beginning of the list and the  
oldest entries are removed from the bottom of the list.  
The name assigned to the number.  
The Contacts type icon associated with the number.  
If the item contains more than one number or  
address stored, <> surrounds the Contacts type icon.  
The Direct Connect number Contacts type icon  
appears when you receive a Direct Connect call or Call  
Alert, even if the number is not stored in Contacts.  
93  
       
Call Alerts you have received appear as Direct Connect  
calls. Like all items in the Recent Calls list, they remain  
listed until you delete them or until they reach the end  
of the list.  
When you select My Info from other phones to view its  
details, you see all the information sent.  
If you receive My Info from the same phone more than  
once, only the most recently sent version appears in  
the Recent Calls list.  
For phone calls, an additional icon appears giving  
information about the call.  
Contact Information From Other Phones  
A call you made.  
$
The Recent Calls list displays contact information sent  
from other phones. This information comes from the  
other phone’s Contacts list or Recent Calls list. See  
A call you received.  
1
A missed call. Missed calls appear on the Recent  
Calls list only if you have Caller ID.  
#
This icon 2 appears with contact information on the  
Recent Calls list.  
When you select a call to view its details, you see  
information such as the name associated with the call,  
the number, date, time, and duration of the call.  
Contact information in the Recent Calls list displays:  
The name contained in the contact information.  
My Info From Other Phones  
The Contacts type icon associated with the number  
or address contained in the contact information. If the  
item contains more than one number or address  
stored, <> surrounds the Contacts type icon.  
The Recent Calls list displays My Info sent from other  
This icon 3appears with My Info sent from other  
phones, along with the Direct Connect number of the  
person who sent the information.  
The name or Direct Connect number of the person  
who sent the contact information appears as a  
94  
   
separate item on the Recent Calls list, above the  
information sent. If one person sends you more than  
one item of contact information, all the items appear  
below the person’s name or Direct Connect number.  
Recent Calls Options  
Highlight a Recent Calls entry and press rto display  
the date and time of the call, the phone number (if  
available), and the caller’s name (if the number is  
already in your Contacts). Press /to display the  
following options:  
When you select contact information to view its details,  
you see the name or Direct Connect number of the  
person who sent the information and all the information  
in the item.  
Use Push To... to select Send My Info or Send Contact  
(Direct Connect or Calls Alerts only).  
If you receive contact information with the same name  
from the same phone more than once, only the most  
recently sent version appears in the Recent Calls list.  
Send Contact to send the contact information to  
another Direct Connect user.  
Delete to delete the entry.  
Viewing Recent Calls  
Delete All to delete all recent calls entries.  
Add Prepend to prepend a number to the contact  
To view the Recent Calls list:  
1. Press `or /> Recent Calls.  
2. Scroll through the list.  
Recent Calls View to select between List View or  
Picture View.  
To view the details of an item on the list:  
Call Alert Queue to view the call alert list.  
From the Recent Calls list, highlight an entry and  
Call Setup to configure the call.  
press r.  
Call New Group to create a Group and place a Group  
Connect call (Direct Connect or Call Alerts only).  
95  
   
4. If the item is a call, you must assign a Contacts  
type to the number:  
Tip: Press Create (left softkey) to begin a message to the  
highlighted entry.  
With the Contacts type field highlighted, scroll left  
or right to display a Contacts type.  
You can also view the next Recent Calls entry by pressing  
the navigation key right or view the previous entry by  
pressing the navigation key left.  
5. To add more information to the entry (optional),  
follow the applicable instructions in “Creating  
Saving Items From Recent Calls  
6. Press Save (left softkey).  
1. From Recent Calls, highlight or select an item.  
2. Press Save (left softkey).  
– or –  
Deleting Items From Recent Calls  
To delete an item from the Recent Calls list:  
1. From Recent Calls, highlight or select an item.  
2. Press /> Delete.  
If Save is not one of your options, press /and  
then select Save or Update Contacts.  
Tip: If the item you are storing is a call, Save does not appear  
if the number is already stored in Contacts.  
3. Press ror press Yes (left softkey) to confirm.  
To delete all items on the Recent calls list:  
1. Press /> Recent Calls.  
3. Select [New Contact] to store the number in a new  
Contacts entry, or select an entry to store the  
number to an existing entry.  
2. Press /> Delete All.  
Note: Storing My Info or contact information from another  
phone to a Contacts entry that has a name assigned to  
it does not change the name of the Contacts entry.  
3. Press Yes (left softkey) to confirm. Press No (right  
softkey) to cancel.  
96  
         
Prepending a Number From Recent  
Calls  
If you need to make a call from the Recent Calls List  
and you are outside your local area code, you can add  
the appropriate prefix by prepending the number.  
1. Highlight or select a Recent Calls entry and press  
/> Add Prepend.  
2. Enter the prefix and press `to call the number.  
97  
   
About Contacts  
8. Contacts  
Contacts stores up to 1200 numbers or addresses.  
Each Contacts entry can store several numbers or  
addresses.  
Information stored in Contacts is saved on your  
SIM card.  
A Contacts entry contains:  
A name — A name is required if you are storing more  
than one number or address to the entry; otherwise,  
it is optional. Typically, this is the name of the person  
whose contact information is stored in the entry.  
A ring tone — You can assign a ring tone to each  
entry. This is the sound your phone makes when you  
receive phone calls or call alerts from any of the  
numbers stored in the entry.  
A Contacts type — Each number or address stored  
must be assigned a Contacts type. (See “Types of  
98  
       
Types of Contacts  
Creating Contacts Entries  
Each number or address stored must be assigned a  
Contacts type:  
Each Contacts entry can store up to 10 numbers or  
addresses, and an entry’s name can contain 20  
characters.  
phone number  
Direct Connect number  
phone number  
phone number  
phone number  
email address  
phone number  
phone number  
Talkgroup number  
Group  
Mobile  
DC  
A
Tip: ICE – In Case of Emergency  
0
To make it easier for emergency personnel to identify  
important contacts, you can list your local emergency  
contacts under “ICE” in your phone’s Contacts list. For  
example, if your mother is your primary emergency  
contact, list her as “ICE–Mom” in your Contacts list. To list  
more than one emergency contact, use “ICE1–___,”  
“ICE2–___,” etc.  
Work1  
Work2  
Home  
Email  
Fax  
i
j
k
l
n
o
r
A number or address and a Contacts type are required  
for all Contacts entries. Other information is optional.  
You may enter the information in any order by scrolling  
through the entry details.  
Pager  
Talkgroup  
Group  
IP  
After you have entered the number or address,  
Contacts type, and any other optional information,  
press Save (left softkey) to save the entry to Contacts.  
t
IP address  
q
Other  
phone number  
p
To cancel a Contacts entry at any time press Cancel  
(right softkey) and then press Yes (left softkey) to return  
to the Contacts list or press @to return to standby  
mode.  
99  
           
To create a Contacts entry:  
For email addresses, see “Entering Text” on  
1. Press /> Contacts > [New Contact].  
When you are finished, press r.  
2. To assign a name to the entry:  
6. To assign more options to the number, including  
Speed # and Voice Name, select [Options] and  
proceed to steps 7-9. Otherwise, skip to step 10.  
Select Name. Enter the name and press r.  
3. To assign a ring tone or picture to the name  
(optional):  
7. The default Speed Dial number assigned to a  
phone number is displayed in the Speed # field.  
This is always the next available Speed Dial  
location. To assign the phone number to a different  
Speed Dial location:  
Select [Ring Tone/Pict], select a ring tone or  
picture, and then press Back (right softkey).  
4. To assign a Contacts type to the number or  
address being stored:  
With the Speed # field highlighted, press r.  
Highlight the Contacts type field.  
Press Delete (right softkey) to delete the current  
Speed Dial number.  
Scroll left or right to select a Contacts type  
(Mobile, DC, Work1, Work2, Home, Email, Fax,  
Pager, Talkgroup, Group, IP or Other).  
Enter the new Speed Dial number and press r.  
5. To store a number or address:  
8. To create a voice name for a number, select Voice  
Name. Follow the prompts to record a name.  
Speak clearly into the microphone.  
Select the # field (or ID for an email address, or IP  
for an IP address).  
9. When you are finished, press Back (right softkey).  
Enter the number or address. For phone  
numbers, use the ten-digit format. For Direct  
Connect numbers, be sure to include the  
asterisks (*).  
10. To add more numbers or addresses to the entry:  
Scroll past the information you already entered.  
100  
     
Enter the additional information for the entry using  
steps 2–9. You must assign a name to the entry, if  
you have not already.  
3. Select [New Contact] to store the number to a new  
entry, or select an entry to store it to an existing  
entry.  
11. Press Save (left softkey).  
4. With the Contacts type field highlighted, scroll left  
or right to select a Contacts type.  
Creating Pauses and Waits  
5. To add more information to the entry, follow the  
applicable instructions in “Creating Contacts  
When storing a number, you can program your phone  
to pause or wait between digits while dialing. A pause  
makes your phone pause for three seconds before  
dialing further. A wait makes your phone wait for your  
response before dialing further.  
6. Press Save (left softkey).  
Viewing Contacts  
This feature is useful when using voicemail or other  
automated phone systems that require you to dial a  
phone number and then enter an access number.  
1. Press /> Contacts and then either highlight an  
entry, enter the first letter of a name, or press  
Search (left softkey), and enter a name. (Your  
phone finds the name you entered or the nearest  
match.)  
For details on using pauses and waits, see “Phone  
Storing Numbers Faster  
2. If an entry has more than one number or address  
stored, <> surrounds the Contacts type icon. Scroll  
left or right to view the icon for each number stored  
in the entry.  
To store numbers to Contacts from standby mode:  
1. Enter a phone number or Direct Connect number.  
2. Press /> Store Number.  
3. Press rto display the entry, and then scroll up or  
down to view all information stored for the entry.  
101  
       
4. Scroll down to the open field, enter the new  
number or address and press r.  
Tip: To display the next or previous entry, scroll right or left.  
5. Press Save (left softkey) to save the new number.  
Filtering Contacts Entries  
– or –  
You can set Contacts to display only entries containing  
Direct Connect numbers, Groups, and Talkgroups.  
To assign a speed dial number or Voice Name,  
select [Options] > Speed # or Voice Name.  
Complete the process, press Back (right softkey)  
and then press Save (left softkey) to save the entry.  
Press /> Contacts > /> Filter > Show DC.  
Select Show All to display all Contacts entries.  
Finding Speed Dial Numbers  
Editing Entries  
Press /> Contacts, select an entry and select a  
phone number. The speed dial number is listed  
directly under the contact phone number.  
1. Press /> Contacts and highlight an entry.  
2. Press Edit (left softkey) or /> Edit.  
3. Follow the applicable instructions in “Creating  
Contacts Entries” on page 99 to edit the entry.  
Adding a Number to an Entry  
1. Display a Contacts entry. (See “Viewing Contacts”  
Tip: When editing or adding to entries, make sure to press  
Save (left softkey) to save the changes (you may have to  
press Back to display the Save option). If you press @  
before pressing Save, your changes will be discarded.  
2. Press Edit (left softkey) or /> Edit.  
3. Highlight the number type field above an open  
number and press the navigation key right or left to  
select a number type.  
102  
     
You can assign speed dial numbers when you add a  
new Contacts entry, when you add a new phone  
number to an existing entry, or when you edit an  
existing number.  
Deleting Entries  
1. Press /> Contacts and highlight an entry.  
2. Press /> Delete Contact.  
To assign a speed dial number to a new phone number:  
3. Press ror press Yes (left softkey) to confirm.  
1. Add a phone number to a new or to an existing  
Deleting a Number or Address  
1. Press /> Contacts and highlight an entry.  
2. Highlight [Options], press r, and then select  
Speed #.  
2. Scroll left or right to display the Contacts type to  
delete.  
3. Enter an available speed dial number and  
3. Press /> Delete Number.  
press r.  
4. Press ror Yes (left softkey) to confirm.  
4. Press Back (right softkey) and then press Save (left  
softkey) to save the entry.  
Note: If an entry contains only one number or address,  
deleting the number or address deletes the entry.  
To assign a speed dial number to an existing phone  
number:  
Assigning Speed Dial Numbers  
1. Press /> Contacts and then highlight an entry.  
Your phone can store up to 1200 phone numbers in  
speed dial locations. (For details on how to make calls  
using speed dial numbers, see “Speed Dialing” on  
page 28.)  
2. Press Edit (left softkey) or /> Edit.  
3. Select [Options] below the number, and then select  
Speed #.  
103  
       
4. Enter an available speed dial number and  
press r.  
6. Press Back (right softkey) and then press Save  
(left softkey)to save the assigned ringer.  
5. Press Back (right softkey) and then press Save (left  
softkey) to save the changes.  
Assigning a Picture to an Entry  
Note: If you attempt to assign an already in-use speed dial  
location to a new phone number, a message will  
appear asking if you wish to overwrite the existing  
speed dial assignment. Press Yes (left softkey) to assign  
the location to the new phone number and delete the  
previous speed dial assignment.  
Assign a picture to display when you receive a call  
from an entry.  
1. Press /> Contacts and then highlight an entry.  
2. Press Edit (left softkey) or /> Edit.  
3. Select [Ring Tone/Pict ] > Picture.  
Selecting a Ringer Type for an Entry  
4. Scroll through available pictures and press rto  
select one. (Scroll left or right to browse pictures in  
the phone’s memory or on the memory card.)  
Assign a ringer type to a Contacts entry so you can  
identify the caller by the ringer type. (See “Ring Tones”  
5. Press Back (right softkey) and then press Save  
(left softkey).  
1. Press /> Contacts and then highlight an entry.  
2. Press Edit (left softkey) or /> Edit.  
3. Select [Ring Tone/Pict ] > Ringer.  
4. Scroll through available ringers. (When you  
highlight a ringer type, a sample ringer will sound.)  
5. Press rto select a ringer.  
104  
       
A subject — A name or number you assign to the  
event.  
9. Tools  
A location — The location of the event. This can also  
be a phone number, Direct Connect number, or  
Talkgroup.  
A start time — The start time for the event. Default is  
the beginning of the day.  
A duration — The length of time the event lasts.  
A date — The date for the event. Default is the day  
highlighted when the event is created.  
A repeat — For recurring events.  
A reminder — A scheduled alert for events that  
include a start time.  
A ring tone for the reminder.  
A profile that your phone uses during the event.  
A Java application that starts when the event starts.  
Datebook  
Only subject and date are required to save an event.  
Datebook stores up to 250 events. You can store events  
over a thirteen month period — twelve months after and  
one month before the current date.  
Viewing Datebook  
Press /> Tools > Datebook.  
A Datebook event contains:  
105  
       
You can view Datebook by the day, by the week, or by  
the month. You can also view the details of any event.  
To see more in day view:  
Scroll up and down using the navigation key.  
To highlight a day in month view:  
Enter the date using the keypad.  
To go to today’s date:  
While in Datebook, press /> Go To Today.  
In day view, brief information about each event for  
that day appears.  
In week view, events appear as markers  
corresponding to their times.  
In month view, days with events are marked.  
To view an event:  
To go to any date in Datebook:  
1. While in Datebook, press /> Go To Date.  
2. Select a date.  
1. Select the day the event occurs.  
2. Select the event.  
To change the current view:  
Creating Events  
While in Datebook, press /and select a view.  
Every Datebook event must have a subject and be  
stored to a date. Other information is optional.  
Note: Day view is the default setting.  
Navigating Datebook  
After you have entered the information, press Done (left  
softkey) to store the event to Datebook.  
To scroll through Datebook:  
To create a Datebook event:  
Scroll left and right using the navigation key.  
– or –  
1. While in datebook, press New (left softkey).  
– or –  
In week view and month view, press *or #.  
In day view, select [New Event].  
106  
   
2. To assign a subject to the event, select Subject  
and:  
7. To make the event a recurring event:  
Select Repeat and then select a repeat cycle.  
Enter the name or enter a phone number, Direct  
Connect number, or Talkgroup number.  
If the event occurs more than once a week,  
select Multiple Day, and select the days.  
– or –  
Press Done (left softkey).  
Press Browse (left softkey) to choose from  
common event names.  
In the End field, select a date for the event to stop  
recurring.  
3. To assign a location to the event (optional), select  
Location and enter the location or enter a phone  
number, Direct Connect number, or Talkgroup  
number.  
8. To create a reminder for this event, select Reminder  
and then select a reminder time or select Custom  
to enter a reminder time.  
Note: If an event has no start time, you cannot create a  
4. The start time automatically assigned to an event is  
the beginning of the day. To change the start time  
or assign no start time, select Start and then enter  
a start time or press No Time (left softkey).  
reminder for it.  
9. To set the ring tone for a reminder, select Ring Tone  
and then select a ring tone.  
10. To assign a profile for your phone to use during  
the event, select Profile and then select a profile.  
(Your phone switches to this profile when the event  
starts and switches back to the previous profile  
when the event ends.)  
5. To assign a duration, select Duration and select a  
duration from the list or select Custom and enter a  
duration.  
6. The date automatically assigned to an event is the  
date that was highlighted or selected when you  
began creating the event. To change the date of  
the event, select Date and then enter a date.  
11. To assign a Java application to start when the  
event starts, select App and then select an  
application. (If you created a reminder for this  
107  
event, your phone prompts you to start the Java  
application when you get the reminder.)  
5. To change more information, follow the applicable  
edit the event.  
12. Once you have entered all relevant information and  
settings, press Done (left softkey).  
6. Press Done (left softkey) to store the event.  
To cancel without saving:  
Deleting Events  
Press Cancel (right softkey).  
1. Select the day the event occurs.  
Editing Events  
2. Select the event and press /> Delete.  
3. If the event is not a recurring event, press ror  
To change the details of an event:  
press Yes (left softkey) to confirm.  
1. Select the day the event occurs.  
2. Select the event and press Edit (left softkey).  
– or –  
If the event is a recurring event, select This Event  
Only to delete only the event selected in step 2, or  
select Repeat Events to delete all occurrences of  
the event.  
3. Follow the applicable instructions in “Creating  
Events” on page 106 to edit the event.  
To copy an event to another date:  
1. Select the day the event occurs.  
2. Select the event and press /> Copy.  
3. Press Yes (left softkey) to confirm.  
4. Enter a date and press r.  
Receiving Reminders  
If you created a reminder for a Datebook event, when  
the reminder time occurs, your phone notifies you with  
text on the display and a reminder tone.  
108  
     
To view more details about the event:  
Press View (left softkey).  
To dismiss the reminder:  
Press Dismiss (right softkey).  
Making Calls From Datebook  
To make a phone call:  
1. Highlight or select an event containing a phone  
number.  
2. Press `or press /> Call # in Event.  
For Events With Java Applications  
To make a Direct Connect call or Talkgroup call:  
If you assigned a Java application to start when the  
event starts, you can start the application when you get  
the reminder.  
1. Highlight or select an event containing a Direct  
Connect or Talk Group number.  
2. Press the DC button. (If you did not include a #  
before a Talkgroup, press /> Talkgroup, and  
then press the DC button.)  
Press /> Launch.  
Making Calls From Datebook and  
Datebook Reminders  
To send a Call Alert:  
1. Highlight or select an event containing a Direct  
If you stored a phone number, Direct Connect number,  
or Talkgroup number in the Subject or Location field of  
a Datebook event, you can call or send a Call Alert to  
that number from Datebook or from the reminder.  
Connect number.  
2. Press /> Alert # in Event, and then press the DC  
button.  
If you store the same type of number (phone number  
or DC/Talkgroup number) in both fields, the number in  
Subject takes precedence.  
109  
 
Press /> Tools > My Info.  
Making Calls From Datebook Reminders  
Information displayed includes My Name (optional,  
you may enter it yourself), Mobile, Direct Connect,  
Work1, Work2, Home, Email, Fax, Pager, Talkgroup,  
IP or Other.  
To call a number:  
Press `or press /and then select Call # in  
Event.  
To make Direct Connect calls or Talkgroup calls:  
Press the DC button.  
To send a Call Alert:  
Note: If you request equipment-related transactions on your  
account, Nextel Customer Service may require you to  
provide specific information about your phone. Press  
/while in My Info to display a submenu that includes  
your phone's service status, unit information, and  
phone identification numbers including IMEI, SIM ID,  
and Serial Number (SN).  
Press /> Alert # in Event, and then press the DC  
button.  
Customizing Datebook Setup  
Adding a Name to My Info  
1. Select /> Tools > Datebook > /> Setup.  
1. Press /> Tools > My Info.  
2. Press Edit (left softkey) > Name.  
3. Enter a name and press r.  
2. Select an option and adjust the values.  
Options include Start View, Daily Begin, Delete  
After, Time Shift, Alert Timeout and Clock.  
You can also edit the information in Other, Work1,  
Work2, Home, Email, Fax, or Pager.  
My Info  
My Info lets you view your phone number, Direct  
Connect number, and other phone information.  
110  
     
To suspend an application:  
Press @.  
To view your suspended applications:  
Press /> Games and Apps > Suspended Apps.  
Java Applications  
Installing Applications  
1. Press /> Games and Apps.  
You can have up to three applications running at one  
time — one running in the foreground and two in the  
background.  
2. Select an application or suite of applications.  
Messages appear as the application installs.  
3. Press Done (left softkey).  
Resuming Applications  
Running Applications  
You can resume a suspended application at any time.  
This brings it to the foreground.  
1. Press /> Games and Apps.  
2. Select an application or suite of applications. If you  
have selected a suite of applications, select an  
application.  
To resume a suspended application:  
1. Press /> Games and Apps > Suspended Apps.  
2. Select an application to resume.  
Tip: If you do not hear the sounds associated with the Java  
application, select Settings > Volume and check the  
volumes of Speaker and Earpiece.  
Ending Applications  
To end an application:  
Suspending Applications  
Press the appropriate softkey to end or exit the  
When you suspend an application, it does not stop  
running. It goes to the background so that you can run  
another application in the foreground.  
application or press /> End.  
111  
                 
To end an application from the Suspended Apps Screen:  
Deleting Applications  
1. Press Games and Apps > Suspended Apps.  
To delete an application:  
2. Highlight an application and press End (left  
softkey).  
1. Press /> Games and Apps.  
2. Highlight an application and press /> Deinstall.  
3. Press ror Yes (left softkey) to confirm.  
To end all applications:  
1. Press /> Games and Apps > Suspended Apps >  
/> End All.  
4. When your phone has finished deleting the  
application, press Done (left softkey).  
2. Press ror press Yes (left softkey) to confirm.  
To delete all Java applications:  
3. To end all applications without letting them exit,  
press EndNow (left softkey) and then press Finish  
(right softkey).  
1. Press /> Games and Apps.  
2. Highlight Java System and press /> Delete All.  
(You may need to press More [left softkey] to  
display Java System.)  
Downloading Applications  
To run more Java applications, you can download  
them into your phone.  
3. Press ror press Yes (left softkey) to confirm.  
Reorder Java Applications  
To access a catalog of items available for purchase and  
download:  
You can change the order of the Java applications in  
the Games and Apps menu.  
Press /> Games and Apps > Buy Games&Apps.  
1. Press /> Games and Apps.  
You can also go to www.nextel.com and sign on to your  
account to find a wide selection of available Java  
applications and downloading instructions.  
2. Highlight Java System and press /.  
112  
       
3. Select Reorder Apps Menu.  
Managing Items  
4. Scroll to the Java application you want to move  
and press Grab (left softkey).  
Depending on how the third-party vendor has set rights  
for the given DRM item, you may be unable to perform  
some of the following tasks.  
5. Scroll to the menu location where you want to  
place the Java application and press Insert (left  
softkey).  
Viewing License Information  
You can check a DRM item’s license to view the  
following information:  
Digital Rights Management (DRM)  
For time-based items, either the date and time the  
When you download multimedia content available  
online, such as Java applications, these items may be  
subject to DRM restrictions. DRM, or digital rights  
management, is a system that defines how copyrighted  
multimedia content can be distributed and used.  
item expires, or the number of days left.  
For count-based items, the number of credits (uses)  
left or an unlimited use notice.  
The name of the item’s vendor.  
To view the license of a DRM item:  
DRM limits items to time-based or count-based usage  
settings. Time-based settings let you use the given item  
for a specified interval. Count-based settings let you  
use an item for a specified number of times after you  
download it or for unlimited use.  
1. Go to the location that contains the item.  
2. Highlight the item and press /> License Info.  
113  
         
Renewing DRM Licenses  
Note: You cannot delete items that are DRM locked.  
Note: Java application data is stored in your phone using the  
same memory space used to store messages, voice  
records, pictures, ring tones, and wallpaper images.  
Deleting some of these other items frees memory for  
Java applications.  
Under certain conditions, third-party vendors will let you  
download an item multiple times within a given time  
frame, even if you deleted the item. Please contact the  
third-party vendor of an item to learn more about the  
vendor’s download regulations.  
1. Go to the location on your phone that contains the  
1. Highlight a DRM item and press /> Delete.  
item.  
2. If prompted, press Yes (left softkey).  
2. Highlight a DRM item and press Renew (left  
softkey) or press /> Renew.  
About Expired Items  
3. Select the link to the page where you purchased  
the item and then follow the vendor’s instructions  
for purchasing an additional license.  
Most items will continue to display on your phone until  
you delete them. You can also choose to renew the  
license for an expired item.  
Deleting Items  
GPS Enabled  
If you delete a DRM item that you purchased from  
Nextel from your phone, you will have to purchase it  
again to download it.  
Your phone’s GPS Enabled feature uses information  
from Global Positioning System (GPS) satellites orbiting  
the Earth to determine the approximate geographical  
location of your phone. The availability and accuracy of  
this location information (and the amount of time that it  
114  
           
takes to calculate it) will vary depending on the  
environment in which you are using the GPS feature.  
establish a view of a wide area of open sky, such as in  
underground locations, inside or between buildings, or  
in dense tree cover), the GPS feature of your phone  
WILL NOT WORK.  
When you make a 911 emergency call, the GPS feature  
of your phone can help emergency personnel locate  
you if your phone has adequate access to GPS satellite  
signals and your emergency response center is  
equipped to process such information.  
Walking or driving very slowly may also substantially  
reduce GPS performance.  
Making an Emergency Call  
You can also use the GPS feature to view your  
approximate location. Location information appears on  
the phone’s display.  
Dial 911 and press `to be connected to an  
emergency response center. If you are on an active  
call, you must end it before calling 911.  
Java applications loaded on your phone can also  
request your location. If your phone is connected to a  
laptop computer or similar device, software running on  
that device can request your location. To protect your  
privacy, you can control whether these requests are  
When you make an emergency 911 call, the GPS  
feature of your phone begins to calculate your  
approximate location. Even where your phone has  
good access to sufficient GPS satellite signals and  
network assist data, it may take 30 seconds or more to  
determine the approximate location. This time will  
increase where there is reduced access to satellite  
signals. When your approximate location is  
determined, it is made available to the appropriate  
emergency response center.  
IMPORTANT: Things to Keep in Mind  
If you are using the GPS feature of your phone while  
driving, please give full attention to driving and to the  
road.  
In some cases, your local 911 emergency response  
center may not be equipped to receive GPS location  
Where adequate signals from multiple satellites are not  
available (usually because your GPS antenna cannot  
115  
     
information. For this reason, and because the GPS  
location information reported is only approximate or  
may not be available in your location, always report  
your location to the 911 operator you speak to when  
making an emergency call, if able, just as you would  
when using a phone without GPS capabilities.  
To calculate your location again:  
Press Refresh (left softkey).  
It may take your phone several minutes to complete the  
process of determining your location, during which the  
phone displays “Scanning For Satellites.”  
The Position screen displays the updated information.  
Note: If you are concerned about whether your local 911  
emergency response center is equipped to receive  
GPS location information, contact your local authorities.  
To cancel a location calculation before it is completed:  
Press Cancel (right softkey) to return to the Position  
screen or press @to return to standby mode.  
Viewing Your Approximate Location  
Each time approximate location of your phone is  
calculated, the latest location information is stored in  
your phone. You will see this information the next time  
you view the Position screen.  
Press /> Tools > GPS > Position.  
This displays the following information about the last  
time your location was calculated:  
The time (as Greenwich Mean Time) and date that  
the location was last calculated.  
Enhancing GPS Performance  
The approximate location, expressed as latitude and  
longitude.  
Sometimes the GPS feature of your phone may be  
unable to complete a location calculation successfully.  
The estimated accuracy of the calculated location.  
To improve accuracy and increase your chances of a  
successful calculation, do the following while your  
phone is determining your approximate location:  
The number of satellites used to calculate the  
location. In general, more satellites make for better  
accuracy.  
116  
     
Stay in the open. The GPS feature works best where  
there is nothing between your phone and a large  
amount of open sky. If possible, go outside, away  
from tall buildings and foliage.  
Stay in network coverage. The network will provide  
your phone with information that helps determine  
your location more quickly and accurately.  
Using GPS With Map Software  
Hold your phone to enhance reception. Signals from  
GPS satellites are transmitted to your GPS antenna,  
which is in your phone antenna. Hold your phone  
away from your body, giving the antenna clear  
access to satellite signals. Do not cover the antenna  
area with your fingers or anything else.  
You can use the GPS feature of your phone to provide  
approximate location data to a laptop computer or  
similar device that is running interactive map software  
such as that made by DeLorme or Microsoft. This way,  
if your phone has good access to GPS signals, your  
approximate position on a map can be made available  
as you travel in a vehicle.  
Stand still. If possible, stand still until your phone is  
finished determining your location. Moving your  
phone at a walking pace while your phone is  
calculating your approximate location may  
substantially decrease GPS performance.  
To do this, connect your phone to your laptop (or other  
device) with a data cable and set your phone to  
transmit data (see “To connect your phone to your  
laptop or other device:” on page 118). Your phone then  
provides your approximate location to the device  
running the map software, which displays your location  
on a map. Your phone provides an updated location  
every second and the map software displays your  
changing location on its map.  
In a car. When using the GPS Enabled feature in a  
car, position your phone so that the GPS antenna  
has good access to GPS signals through the car’s  
windows. Typically, the GPS antenna has best access  
to GPS signals in a car when placed near a window.  
Note: Although moving your phone at a walking pace  
decreases GPS performance, moving it at the speed of  
a moving car does not.  
more details on obtaining good location information.  
117  
 
Make sure the COM port settings of your laptop or  
other device are set to the following:  
Note: Because your phone is continuously determining your  
location, using the GPS feature of your phone with map  
software uses the phone’s battery power quickly.  
Bits per second: 4800  
Data bits: 8  
To connect your phone to your laptop or other device:  
Parity: None  
1. Pull open the connector cover.  
Stop bits: 1  
2. With the phone’s display facing up, insert a  
micro-USB data cable into the charger connector.  
Flow control: Hardware  
To set your phone to send location information to your  
laptop or other device:  
1. Press /> Tools > GPS > Interface.  
2. Set NMEA OUT to USB or Bluetooth.  
Your phone is now sending location data to your  
laptop or other device.  
To stop sending location data to your laptop or other  
device:  
Set NMEA OUT to Off.  
Each time you power your phone on, NMEA OUT is  
automatically set to Off.  
3. Insert the data plug into the COM port of your  
laptop or other device.  
Make sure no other application is using the COM port  
selected.  
118  
To make a call to the memo number:  
Memo Feature  
1. Press /> Tools > Memo.  
Memo lets you store a number, make a call to that  
number, and save it to Contacts.  
2. To make a phone call, press `. To make a Direct  
Connect call, press the DC button.  
To create a memo:  
To store the memo number to Contacts:  
1. Press /> Tools > Memo.  
1. Press /> Tools > Memo.  
2. Enter a number and press r.  
To view the memo later:  
2. Press /> Store to Contacts.  
3. To store the number as a new entry, select  
[New Contact].  
Press /> Tools > Memo.  
– or –  
To delete the memo:  
To store the number to an existing entry, select the  
entry.  
1. Press /> Tools > Memo.  
2. Press and hold Delete (left softkey) and then  
press r.  
4. With the Contacts type field highlighted, scroll left  
or right to display a Contacts type for the number.  
To edit the memo:  
5. To add more information to the entry, follow the  
applicable instructions in “Creating Contacts  
1. Press /> Tools > Memo.  
2. Press and hold Delete (left softkey) to delete the  
number.  
6. Press Save (left softkey).  
3. Enter the new number and press r.  
119  
           
Playing Voice Records  
Voice Records  
1. Press /> Multimedia > VoiceRecord.  
A voice record is a recording you make with your  
phone and can play back. You can record notes to  
yourself or phone calls.  
2. Highlight a voice record and press r.  
3. To stop the voice record while it is playing,  
press r.  
Your phone can store up to 20 voice records.  
Tip: To fast forward, scroll right. To rewind, scroll left. To pause  
Creating Voice Records  
or resume, press any number key.  
1. Press /> Multimedia > VoiceRecord >  
[New VoiceRec].  
Labeling Voice Records  
When you create a voice record, it is labeled with the  
time and date it was recorded. You can rename it with  
a custom label.  
2. Recite a message into the microphone.  
3. When you are finished recording, press r.  
To record a phone call:  
1. Press /> VoiceRecord.  
1. While on an active call, press /> Record.  
2. When you are finished recording, press r.  
2. Highlight a record and press Label (left softkey).  
3. Enter a label and press r.  
Note: Recording of phone calls is subject to applicable laws  
regarding privacy and recording of phone  
conversations.  
120  
           
Deleting Voice Records  
Managing Memory  
To delete an unlocked voice record:  
To view the amount of memory available for voice records:  
1. Press /> Multimedia > VoiceRecord.  
2. Highlight a record and press /> Delete.  
3. Press ror Yes (left softkey) to confirm.  
To delete all unlocked voice records:  
1. Press /> Multimedia > VoiceRecord.  
2. With [New VoiceRec] highlighted, press Memory  
(left softkey).  
Call Timers  
1. Press /> Multimedia > VoiceRecord.  
2. Highlight a record and press /> Delete All.  
3. Press ror Yes (left softkey) to confirm.  
Call timers measure the duration of your phone calls,  
Direct Connect, or Group Connect calls, and the  
number of kilobytes sent and received by your phone:  
Last Call — displays the duration of your most recent  
phone call.  
Locking Voice Records  
When you lock a voice record, it cannot be deleted  
until you unlock it.  
Phone Reset — keeps a running total of your phone  
call minutes, until you reset it.  
1. Press /> Multimedia > VoiceRecord.  
Phone Lifetime — displays the total minutes of all your  
phone calls.  
2. Highlight a record and press /> Lock to lock it.  
Press /> UnLock to unlock a message.  
DC/GC Reset — keeps a running total of all of your  
Direct Connect and Group Connect call minutes,  
until you reset it  
When a voice record is locked, this icon X appears  
next to it.  
DC/GC Lifetime — displays the total minutes of all  
your Direct Connect and Group Connect calls.  
121  
         
Kbytes Reset — keeps a running total of the number  
of kilobytes sent and received by your phone, until  
you reset it.  
To view or reset a timer:  
1. Press /> Tools > Call Timers.  
2. Highlight a timer and press r.  
To reset a timer, highlight Phone Reset, DC/GC  
Reset, or Kbytes Reset and press r. Press Reset  
(left softkey). Press ror press Yes (left softkey) to  
confirm.  
Note: The values displayed by Call Timers should not be  
used for billing. Call times are estimates only.  
122  
Inserting the microSD Card  
1. Remove the battery cover. (See “Installing the  
10. microSD Card  
2. Open the memory card slot cover, and slide in the  
memory card until it clicks into place.  
Using a microSD Card With Your  
Phone  
Using the microSD Card Slot  
Your phone is equipped with a microSD (Secure  
Digital) memory card slot to expand the phone’s  
available memory space. It allows you to store images,  
videos, music, and voice data in your phone.  
123  
       
4. Grasp the raised edge of the microSD card and  
pull the card out.  
Note: Be sure to use only recommended microSD cards.  
Using non-recommended microSD cards could cause  
data loss and damage your phone. Your handset can  
be used with Transflash or microSD memory cards.  
3. Close the memory card slot cover and replace the  
battery cover.  
4. Your phone may prompt you to use the memory  
card to store new media items, go to Music Player,  
go to the Camera, go to the Media Center, or do  
nothing. If you select [Do Nothing], you will return to  
standby mode. Respond to the prompt now.  
Removing the microSD Card  
Do not remove the memory card until you select the  
Remove Card option under Settings. Removing the  
memory card before selecting the Remove Card option  
could result in loss of data.  
1. Press /> Settings > Memory Card >  
Note: The microSD card and its adapter can be easily  
damaged by improper operation. Please be careful  
when inserting, removing, or handling them.  
Remove Card.  
2. Once the handset confirms that it is safe to remove  
the microSD card, press OK (left softkey).  
5. Close the memory card slot cover and replace the  
battery cover.  
3. Remove the battery cover and open the memory  
card slot cover.  
124  
 
Using the microSD Adapter  
Tip: If your computer has an SD card slot or if you have an SD  
card adapter, you can use the microSD card and adapter  
to transfer files such as audio files, pictures, and videos  
directly between your computer and your microSD card.  
The supplied microSD adapter allows microSD cards  
to be used in SD-compatible devices such as digital  
cameras, printers, and computers. Before using, you  
will need to insert the microSD card into the microSD  
adapter.  
When you insert the card into your computer, select  
Open folder to view files using Windows Explorer (or a  
similar option) and drag and drop files using the available  
folders.  
To insert the microSD card into the microSD adapter:  
With the label side of the microSD card facing up,  
insert the card into the supplied microSD adapter,  
and gently slide the card until it is fully inserted.  
microSD Settings  
Viewing Memory in the microSD Card  
1. With the microSD card inserted, press />  
Multimedia > Media Center > /> Memory Usage.  
2. The following information will be displayed:  
Used displays the amount of used memory  
space.  
To remove the microSD card from the microSD adapter:  
Free displays the amount of free memory space.  
Hold the front edge of the microSD card, and  
gently pull outward to remove it from the adapter.  
Capacity displays the capacity of the memory  
card.  
Card Files displays the number of files in the card.  
125  
     
Setting Storage Options  
WARNING: The formatting procedure erases all the data on  
the microSD card, after which the files CANNOT  
be retrieved. To prevent the loss of important data,  
please check the contents before you format the  
card.  
You can set your phone to store pictures, videos,  
music, and audio recordings on an inserted microSD  
card instead of in the phone’s memory (when  
available).  
1. With the microSD card inserted, press />  
Settings > Memory Card > Store Media.  
microSD Folders  
2. To store pictures, videos, music, and audio  
recordings on the memory card, select  
Prefer On Card.  
Displaying Your microSD Folders  
All the files stored in the appropriate folders on the  
microSD card are accessible through the Media  
Center.  
Formatting the microSD Card  
1. With the microSD card inserted, press />  
Multimedia > Media Center.  
Formatting a microSD card permanently removes all  
files stored on the card.  
2. Press the navigation key left or right to display a  
Card folder (All, Pictures, Audio, or Video) and  
press r.  
1. With the microSD card inserted, press />  
Settings > Memory Card.  
2. Highlight Format Card and press r. (A warning  
will be displayed.)  
3. To view or play a file, highlight it and press ror  
the appropriate softkey.  
3. If you are sure you wish to remove all the files from  
your microSD card, press Yes (left softkey).  
Note: The Media Center only recognizes compatible files  
stored in the card’s AUDIO, VIDEO, and IMAGE folders.  
126  
       
follow the onscreen instructions to safely unplug  
the USB cable.  
Connecting Your Phone to Your  
Computer  
Important Connection Information  
Before using your phone’s mass storage capabilities,  
you need to prepare your phone’s data services to  
synchronize with your desktop or laptop computer.  
Once the phone is connected to the computer, you can  
transfer your data to or from the microSD card.  
No driver installation is required for Windows 2000/  
ME/XP/Vista users. If you use Windows 98/98SE, you  
have to download and install the USB Mass Storage  
Driver from the Nextel website at www.nextel.com.  
To avoid loss of data, DO NOT remove the USB  
cable, the microSD card, or the battery while files are  
being accessed or transferred.  
1. With the microSD card inserted, press />  
Settings > Connections > USB.  
2. Highlight Memory Card Access and press r.  
DO NOT use your computer to change or edit folder  
or file names on the microSD, and do not attempt to  
transfer large amounts of data from the computer to  
the microSD card. Doing so may cause the microSD  
card to fail.  
Note: To allow applications to access you phone,  
press /> Settings > Connections > USB >  
Application Access.  
3. Connect your phone to your computer using a  
compatible USB cable. (Wait for the connection to  
be completed. When connected, the host  
DO NOT turn off or restart your computer, or put it  
into standby mode, while using a mass storage  
device. Doing so will result in loss or damage of data.  
computer will automatically detect your phone.)  
If you connect a mass storage device to a peripheral  
device, your device may not work properly.  
To remove the connection:  
When you have finished transferring data, click the  
USB device icon on your computer’s taskbar, and  
127  
     
2. Using the external display screen as a viewfinder,  
aim the camera lens at your subject.  
11. Camera  
3. Press ,(center touch media key) until the shutter  
sounds.  
Tip: To take a self-portrait: open the phone, use the internal  
screen to aim the lens, and then press rto take the  
picture.  
If you have taken the picture with the phone open,  
you can press Send (left softkey) to send the  
picture in an MMS message, Discard (right  
softkey) to discard the picture and return to the  
camera, rto save the picture and return to  
camera, or press /for the following options:  
Taking Pictures  
Taking pictures with your phone’s built-in camera is as  
simple as choosing a subject, pointing the lens, and  
pressing a button.  
Send Via... to send the picture via Direct Send  
(PTT), Bluetooth, or Messaging (MMS).  
Save [OK] to save the picture.  
1. Press /> Multimedia > Camera and close the  
phone.  
Set As Caller ID to assign the picture to a  
contact. Highlight a contact and press r.  
Tip: To activate the camera with the phone closed, press the  
Smart Button (() to open the external display menu  
and use the touch media keys to select the camera  
icon.  
Set As Wallpaper to use the picture as your  
phone’s wallpaper.  
Media Center to save the picture to the Media  
Center and open the Media Center.  
128  
       
Remove Card to enable the memory card  
removal.  
GPS Tag the option to turn GPS Tag on or off.  
Picture Quality to select the picture quality between  
Normal or Fine.  
Memory Usage to see the amount of used and  
available memory on your phone.  
Picture Size to select the picture size.  
Memory Card to access the memory card  
menu.  
White Balance to select a white balance setting.  
Exposure Control to adjust the exposure.  
Style to set the picture effect.  
Camera Setup to set the camera default  
settings for Ask for Name, Shutter Sound,  
Default Size, Default Quality and GPS Tag.  
Memory Usage to verify memory usage.  
Memory Card to access the memory card menu.  
Camera Setup to set the camera default settings.  
Camera Options  
Setting the Self Timer  
With the phone is open and in camera mode, press /  
to display additional camera options:  
1. From camera mode, press /> Self Timer.  
Media Center to go to the Media Center to review  
your saved pictures.  
2. Highlight a delay length (10 Seconds, 15 Seconds or  
20 Seconds) and press r.  
Record Video to switch to video mode. (See  
3. Press Capture (left softkey) or rwhen you are  
ready to start the timer. (The lower portion of the  
display screen displays the countdown time.)  
Zoom to zoom in on a subject. (See “Using the  
Zoom” on page 130 for details.)  
4. Get ready. The camera will automatically capture  
the picture when the timer runs down.  
Remove Card to safely remove the memory card.  
Self Timer to activate the camera’s timer. (See  
129  
               
To cancel the self timer after it has started:  
Press Cancel (right softkey).  
Default Quality: Highlight Normal or Fine and  
press r.  
GPS Tag: If this option is On, pictures will be  
tagged with the geographic location of where they  
were taken.  
Using the Zoom  
Depending on your resolution settings, you can adjust  
the zoom from 1x to 4x.  
Recording Videos  
To adjust the zoom:  
1. While in camera mode, press /> Zoom.  
2. Select from 1X, 2X or 4X.  
In addition to taking pictures, you can also record, view,  
and send videos with the phone’s video camera.  
To record a video:  
Camera Setup  
1. Press /> Multimedia > Camcorder to activate  
video mode. Close the phone. (Additional video  
options are available through the video mode  
page 131 for more information.)  
Set your camera’s resolution and default size in the  
Camera Setup menu.  
1. While in camera mode, press /> Camera Setup.  
2. Highlight an option and press r.  
Tip: To activate the camcorder with the phone closed, press  
the Smart Button (() to open the external display  
menu and use the touch media keys to select the  
camcorder icon.  
Ask for Name: Select On for the camera to prompt  
you to enter a new file name when saving a  
picture.  
Shutter Sound: Highlight an option and press r.  
2. Using the external display screen as a viewfinder,  
aim the lens at your subject.  
Default Size: Highlight a size and press r.  
130  
               
3. Press Record (center touch media key) to begin  
recording. If the phone is open, press Record (left  
softkey).  
Video Mode Options  
With the phone in video mode, press /to display  
additional options:  
4. Press Stop (center touch media key) to stop  
recording. If the phone is open, press Stop (left  
softkey).  
Media Center to go to the Media Center to review  
your saved videos.  
Capture Picture to switch to picture mode.  
Zoom to zoom in on a subject.  
If the video was recorded with the phone open,  
press rto save or Discard (right softkey) to  
delete the video and return to camcorder mode.  
Remove Card to enable the memory card removal.  
Video Size to select the video size.  
5. Press /for more options:  
Review to play back the video.  
Video Length to select the video length.  
Send Via... to send the video via Bluetooth or  
Messaging (MMS).  
Short (for messages) restricts the length of the  
video to a size that can be sent via messaging.  
Save [OK] to save the video.  
Maximum lets you take as long a video as  
available memory space allows.  
Media Center to go to the Media Center to review  
your saved videos.  
Memory Usage to verify memory usage.  
Remove Card to enable the memory card removal.  
Memory Card to access the memory card menu.  
Camera Setup to set the camcorder default settings.  
Memory Usage to verify memory usage.  
Camera Setup to set the camcorder default  
settings.  
131  
   
Selecting Video Settings  
Phone Folder  
1. From video mode, press /> Camera Setup.  
Your phone’s internal storage area is called the Phone  
folder. From the Phone folder, you can view all the  
pictures and videos you have stored there, send items  
(via Direct Send, Bluetooth, or messaging), delete files,  
and access additional options.  
2. Highlight an option and press r:  
Ask for Name: Select On for the camcorder to  
prompt you to enter a new file name when saving  
a video file.  
To review your stored pictures and videos in the phone:  
Shutter Sound: Highlight an option and press r.  
1. Press /> Multimedia > Media Center.  
Default Video Size: Highlight an option and  
press r.  
2. Use the navigation keys to select Phone: All and  
view saved pictures and videos.  
Storing Pictures and Videos  
Card Folder  
Your phone’s pictures, video, and audio recordings  
storage area is called the Media Center. There are two  
types of folders in the Media Center: Phone and Card.  
You can save pictures and videos directly to the  
microSD card. Several pictures can be stored and  
managed in each folder on the microSD card,  
depending on its capacity.  
Setting Storage Options  
To review your pictures and videos on the microSD card:  
1. Press /> Settings > Memory Card > Store Media.  
1. Press /> Multimedia > Media Center.  
2. Select On Phone or Prefer on Card.  
2. Use the navigation keys to select Card: All and view  
saved pictures and videos.  
132  
   
Delete All to delete all files in the folder.  
Phone Folder and Card Folder Options  
Filter to select the media type to view from Phone: All,  
Phone: Pictures, Phone: Audio, Phone: Video, Card: All,  
Card: Pictures, Card: Audio, and Card: Video.  
When you are highlighting a picture or video file in the  
phone or microSD card folders, press /to display the  
following options:  
Set View to switch the display from Plain List View to  
Thumbnail List View.  
Delete to delete the selected file.  
Lock to lock the selected file.  
Memory Usage to verify memory usage.  
Memory Card to go to the memory card menu.  
Edit to display the following options (pictures only):  
Crop to crop the selected picture.  
Rename to rename the selected file.  
Send Via... to send the file via Direct Send, Bluetooth,  
or Messaging.  
Camera to activate Camera mode.  
Rotate/Flip to rotate or flip the selected picture.  
Remove Card to enable the memory card removal.  
Color Adjustments to select a color setting for the  
picture.  
Set As Caller ID to display the currently highlighted  
picture for incoming calls from a specific Contacts  
entry. Highlight an entry and press r.  
Resize to resize the picture.  
Borders to add a border to the picture.  
Stamps to add a stamp to the picture.  
Text to add text to the picture.  
Set As Wallpaper to display the currently highlighted  
picture as a wallpaper. Highlight Internal Display,  
External Display, or Both and press r.  
Copy To Card/Phone to copy the file from the current  
folder to the other.  
Text Bubble to add a text bubble to the picture.  
Setup to Sort files (By Time or By Name), and to turn  
Remember Filter on or off.  
Move To Card/Phone to move the file from the current  
folder to the other.  
133  
To turn Bluetooth on:  
1. Press />Tools > Bluetooth > Setup > Power.  
2. Highlight On and press rto enable Bluetooth.  
To turn Bluetooth off:  
12. Bluetooth  
1. Press /> Tools > Bluetooth > Setup > Power.  
2. Highlight Off and press rto disable Bluetooth.  
To turn discoverable mode on:  
Press /> Tools > Bluetooth > Setup >  
Find Me Duration.  
Turning Bluetooth On and Off  
For the duration selected under Find Me Duration,  
the phone will be discoverable by other devices  
that are within range.  
Bluetooth is a short-range communications technology  
that allows you to connect wirelessly to a number of  
Bluetooth devices, such as headsets and hands-free  
car kits, and Bluetooth-enabled handhelds, computers,  
printers, and wireless phones. The Bluetooth  
communication range is usually up to approximately  
30 feet. By default, your device’s Bluetooth feature is  
turned off. Turning Bluetooth on makes your phone  
“discoverable” by other in-range Bluetooth devices.  
Bluetooth Status Indicators  
The Bluetooth status indicators on your phone’s display  
screen shows your Bluetooth connection status at a  
glance:  
No Status Indicator – Bluetooth is disabled (default  
status)  
B – Status indicator will blink when the phone is in  
discovery mode.  
134  
       
B – Status indicator will be solid when connected to a  
Bluetooth device.  
File Transfer Help opens a help file about  
transferring files via Bluetooth from your  
computer.  
Bluetooth Menu  
Connecting Bluetooth Devices  
The Bluetooth menu allows you to set up many of the  
characteristics of your phone’s Bluetooth service.  
Pairing and Connecting  
1. Press /> Tools > Bluetooth.  
1. Press /> Tools > Bluetooth > Audio Devices >  
[Look for Devices] to connect to a hands-free  
device.  
2. Set your Bluetooth options.  
Select Audio Devices to discover and connect to  
hands-free devices.  
– or –  
Select Pair to Devices to scan for and pair your  
phone to an available Bluetooth device.  
Press /> Tools > Bluetooth > Pair to Devices to  
pair with a device. (Your phone will display a list of  
discovered in-range Bluetooth devices.)  
Select Device History to link to devices that have  
been connected to your phone.  
2. Highlight a device and press r.  
Select Setup to turn Bluetooth on and off, rename  
your phone for Bluetooth, and set the time for the  
Find Me command listed below.  
3. Follow the prompts, including entering a PIN if  
requested, and press rto complete the  
connection.  
Select Find Me to make your phone discoverable  
to Bluetooth devices for a period of time.  
Pairing uses a PIN to establish a trusted connection  
between your phone and another Bluetooth device.  
This PIN is stored for future connections.  
135  
     
To use Bluetooth during a call:  
1. While in a call, press /> Use Bluetooth.  
2. Select a device.  
Note: Due to different specifications and features of other  
Bluetooth-compatible devices, display and operations  
may be different, and functions such as transfer or  
exchange may not be possible with all Bluetooth-  
compatible devices.  
Disconnecting From a Device  
Connecting to a Stored Device  
1. Press /> Tools > Bluetooth > Audio Devices.  
If you have previously connected to a device, the  
device will be stored on your phone so you can  
connect with it easily.  
2. Press Drop (left softkey) and then press Yes (left  
softkey).  
Note: Pressing No (right softkey) when prompted exits the  
1. Press /> Tools > Bluetooth > Audio Devices and  
then select a device.  
menu without disconnecting the device.  
Understanding Bluetooth Access Settings  
2. If prompted to bond with the device, press Yes (left  
softkey).  
A Bluetooth device can have either Automatic or Ask  
security access. The first time a Bluetooth device  
connects to your i890 phone, you must grant the  
device permission to connect. You can then change  
the access setting of the device to either Automatic or  
Ask.  
3. If prompted, enter the Bluetooth PIN and press Ok  
(left softkey). Your phone will connect to the device.  
Using Bluetooth During a Call  
During a call, you can connect with available Bluetooth  
devices.  
If you set a device to Automatic, that device can  
connect automatically to your phone when it is in  
range. If you set a device to Ask, that device must  
Note: If the Hands Free menu contains only one device, then  
your phone will automatically try to connect to that  
device.  
136  
request permission before it can connect to your  
phone.  
Sending Items via Bluetooth  
Devices are automatically granted permission during  
the ten seconds after connecting.  
Sending Contacts, Datebook Events and  
Media Center Items  
The default for hands-free devices, such as Bluetooth  
headsets, is Automatic.  
Bluetooth lets you send Contacts entries, Datebook  
events, and compatible Media Center items to  
connected devices.  
Setting Device Details  
The device history stores a list of up to 20 devices that  
have connected with your phone.  
Files sent or received may be up to10 MB.  
You can only connect your phone to one device at a  
time.  
Press /> Tools > Bluetooth > Device History.  
From the device history, highlight a device and press  
Edit (left softkey) to edit the device name and change  
the access settings. To delete a device, highlight it,  
press /> Delete, and then press Yes (left softkey).  
Note: Go to www.nextel.com and click on Accessories for a  
list of i890 phone Bluetooth-compatible devices.  
Sending Contacts  
1. Press /> Contacts.  
Note: If you delete a device from device history, you will have  
to find the device to connect with it. (See “Pairing and  
2. Highlight a contact and press /> Send Via... >  
Bluetooth.  
3. Select a device or search for a device by selecting  
[Look for Devices].  
137  
   
4. If prompted, bond with the device. Your phone  
connects to the device and transfers the contact.  
3. Select a device or search for a device by selecting  
[Look for Devices].  
4. If prompted, bond with the device. Your phone  
connects to the device and transfers the file.  
Sending Datebook Events  
1. Press /> Tools > Datebook.  
Receiving Items  
2. Highlight an event and press /> Send Via....  
For a repeating event, select This Event Only to  
send only this occurrence or Repeat Events to  
send all instances.  
You receive a prompt when your phone has an  
incoming transfer.  
Press Accept (left softkey) to accept the transfer or  
3. Select Bluetooth.  
press Reject (right softkey) to reject the transfer.  
4. Select a device or search for a device by selecting  
Note: Media files transferred from a PC may be copied to  
your microSD card’s root directory and may not be  
accessible by your phone. To check the location,  
connect your phone to your computer as a USB mass  
storage device and move the files to the appropriate  
folders.  
[Look for Devices].  
5. If prompted, bond with the device. Your phone  
connects to the device and transfers the event.  
Sending Media Center Items  
You can only send audio files and pictures if they are  
not forward locked and if their DRM settings do not  
prevent you from sending them.  
Canceling Transfers  
You can cancel a transfer while in progress.  
1. Press Cancel (right softkey).  
1. Press /> Multimedia > Media Center.  
2. Press Yes (left softkey) to cancel, or press No (right  
softkey) to continue with the transfer.  
2. Highlight a file and press /> Send Via... >  
Bluetooth.  
138  
     
Viewing and Storing Received Items  
After an incoming transfer is complete, your phone  
translates the item and it appears on the display.  
You can choose to either store or discard the item.  
Items are stored as follows:  
Contact entries are stored to Contacts.  
Pictures and audio files are stored to their folders and  
are accessible through the Media Center.  
Datebook events are stored to Datebook.  
To store an item, press Store (left softkey).  
To discard an item without saving it, press  
Discard (right softkey).  
139  
   
Voice records created when your phone was not in  
a call.  
13. Multimedia  
Musical ringtones in the list of ringtones.  
Audio files saved from MMS messages.  
Audio files (songs, recordings, podcasts) you  
downloaded to your phone.  
Pictures and audio files accessible through the Media  
Center can be sent in MMS messages, subject to  
message size limitations. See “Creating and Sending  
Messages” on page 51 for information on MMS.  
Viewing the Media Center  
Media Center  
1. Press /> Multimedia > Media Center.  
The Media Center provides convenient access to all  
supported multimedia files on your device or your  
memory card.  
2. Scroll to view the items in the Media Center.  
Choosing Thumbnail View or List View  
Note: The Media Center cannot read the Music and Podcast  
1. Press /> Multimedia > Media Center > />  
Set View.  
folder from the microSD card.  
All pictures stored in your phone’s memory can be  
accessed through the Media Center.  
2. Select Thumbnail List View or Plain List View.  
The following audio recordings can be accessed  
through the Media Center:  
140  
         
Filtering by Media Type  
Sorting by Time or Name  
Press /> Multimedia > Media Center > /> Filter  
and select a filtering option: Phone: All, Phone:  
Pictures, Phone: Audio, Phone: Video, Card: All, Card:  
Pictures, Card: Audio, or Card: Video  
1. Press /> Multimedia > Media Center > />  
Setup > Sort.  
2. Select By Time to sort by the time items were  
created or By Name to sort alphabetically.  
Keeping the Last Filter Setting  
When you receive your phone, the Media Center is set  
to sort items by time.  
You can set the Media Center to show all items every  
time you access it or to keep the filtering setting you  
had when you last viewed it.  
Forward Locked Items  
Some items saved to the Media Center may be forward  
locked. Forward locked items are usually copyright  
protected, and they cannot be sent or shared.  
Press /> Multimedia > Media Center > />  
Setup > Remember Filter > On.  
When you receive your phone, the Media Center is set  
to show all items every time you access it.  
You cannot remove forward locking from an item.  
When you view items in the Media Center, one of these  
icons appears next to each forward locked item:  
Accessing Items  
1. Press /> Multimedia > Media Center.  
2. Highlight an item and press rto select it.  
3. Scroll right or left to access additional items.  
Forward locked.  
u
Forward lock and locked.  
v
141  
   
When an item is locked, it cannot be deleted from the  
Locking an item has no effect on its forward locking.  
3. Delete the current name, enter a new name, and  
press r.  
Locking Items  
DRM Items  
When you lock an item in the Media Center, it cannot  
be deleted until you unlock it.  
Except for Java applications, which download to Java  
Apps, the default location for any DRM items that you  
download is the Media Center.  
1. Press /> Multimedia > Media Center.  
2. Highlight or select an item and then press />  
Lock or Unlock to lock or unlock the item.  
Depending on how a vendor has set rights for an item,  
the item may include the following status icons.  
Deleting Items  
The item is a DRM item.  
k
Deleting items from the Media Center means they can  
no longer be accessed anywhere in your phone,  
including the list of ringtones, the list of voice records,  
and Contacts.  
The DRM item has expired.  
l
All DRM items are forward locked. As with other items  
in the Media Center, you can lock DRM items. See  
Deleting an Item  
1. Press /> Multimedia > Media Center.  
Renaming Items  
2. Highlight or select an item and then press />  
Delete.  
1. Press /> Multimedia > Media Center.  
2. Highlight or select an item and then press />  
Rename.  
3. Press Yes (left softkey) to confirm.  
142  
         
Deleting All Items  
Pictures  
You can delete all unlocked items currently in view,  
depending on how Media Center filtering is set. See  
to show all types of Media Center items, all unlocked  
items are deleted.  
The Media Center lets you view pictures and send  
them in MMS messages, with Nextel Direct Send, or  
with Bluetooth. You can also assign them to Contacts  
entries or set them as your phone’s wallpaper.  
Viewing Pictures  
1. Press /> Multimedia > Media Center.  
2. Press /and then select Delete All.  
3. Press Yes (left softkey) to confirm.  
To view a picture, highlight it from the list of items  
in the Media Center and press r.  
If your phone is set to show thumbnails, a thumbnail of  
each picture appears next to the picture in the list of  
items. If your phone is not set to show thumbnails, this  
icon a appears next to the picture.  
Tip: If you delete items you have purchased and downloaded,  
including DRM items, you will usually have to repurchase  
the item if you decide you want it back. Certain DRM  
vendors may not charge you to download an item  
multiple times within a given time frame. Please contact  
the vendor for details.  
To see a larger or smaller view of the picture you are  
viewing:  
Press /> Zoom and select a setting.  
Viewing Memory Usage  
If the picture does not fit in the display, use the  
navigation key to view different parts of the picture.  
1. Press /> Multimedia > Media Center.  
2. Highlight or select any item in the Media Center.  
3. Press /> Memory Usage.  
Sending Pictures in a Message  
1. Highlight or select a picture and then press Send  
(left softkey) or press /> Send Via... > Messaging.  
To free memory, delete items.  
143  
       
2. Create and send the message. (See “Creating and  
Sending Messages” on page 51.) The picture you  
selected is automatically attached.  
Setting Pictures as Wallpaper  
Highlight or select a picture and press />  
Set As Wallpaper.  
Sending Pictures With Direct Send  
My Music  
1. Highlight or select a picture and press />  
Send Via... > Direct Send.  
My Music groups your audio files into folders and lists.  
When you select an audio file to play, My Music plays  
the file and then plays the other audio files grouped  
with it.  
2. Select A Contact or A Recent Call and select an  
available recipient.  
3. Press the DC button to send the picture.  
In addition to music, My Music plays podcasts that you  
have downloaded to your computer and then saved on  
your memory card.  
Sending Pictures With Bluetooth  
You must set up your phone to send items  
using Bluetooth before you can send a picture.  
If you receive calls or notifications while playing an  
audio file with My Music, the audio file pauses and a  
prompt asks you to accept or ignore the incoming call  
or alert.  
1. Highlight or select a picture and press />  
Send Via... > Bluetooth.  
2. Select a device or search for a device by selecting  
[Look for Devices].  
Accessing My Music  
3. If prompted, bond with the device. Your phone  
connects to the device and transfers the picture.  
1. Press /> Multimedia > My Music or press />  
Games and Apps > Music Player to launch the My  
Music player.  
144  
     
2. Press the navigation key up or down to select your  
music.  
Songs — All audio files on the memory card (except  
podcasts), listed alphabetically by title.  
Playlists — Folders and lists you have created. The  
default playlist is Favorites.  
3. Press rto play music.  
Exiting My Music  
Albums — Songs grouped by album title.  
To exit My Music, press Exit (right softkey). (If Exit is  
Artists — Songs grouped by alphabetically by artist  
and title.  
not an option, press Back [right softkey] until it is.)  
Genres — Songs grouped by genre.  
My Music on the External Display  
Podcasts — Podcast episodes grouped alphabetically  
by program. Episodes are sorted by date.  
You can launch My Music from the external display by  
pressing the Smart Button (() and selecting the My  
Music application from the menu.  
Other — Other songs group alphabetically.  
If there is not enough album, artist, or genre data  
associated with a file, it is grouped as “Unknown”.  
Use the touch media keys (Play/Pause [  
Forward [ ], Previous/Rewind [ ]) to control My  
Music from the external display.  
X
], Next/Fast  
Y
W
Naming Audio Files  
File names can include up to 255 characters, including  
the file format extension (for example, mp3). Only the  
first 32 characters will be displayed. If a file name is  
longer than 255 characters, it will not be visible on the  
player and cannot be played. In this case, you will need  
to rename the file and resave it to the memory card.  
How Audio Files Are Organized  
My Music groups audio files on the memory card into  
folders and lists. Unless the phone determines a file is  
a podcast, it treats all audio files as songs.  
When you access My Music, you see that the audio  
files are grouped into these folders:  
145  
   
Any time you are viewing a list of folders with My Music,  
you can highlight a folder and press Play (left softkey)  
to start playing the contents of that folder or press rto  
view the contents of the folder.  
Playing Audio Files  
Note: Audio File Formats: My Music does not support all  
audio file formats or bit rates/sampling rates. Supported  
extensions include .3ga, .3gp, .aac, .amr, .au, .awb, .imy,  
.m4a, .mid, .midi, .mmf, .mp3, .mp4, .mpga, .mxmf, .ra,  
.ram, .rm, .smf, .wav, .wma, .xmf, .xmf0, and .xmf1.  
Any time you are viewing a list of audio files, you can  
highlight a file and press Play (left softkey) to play it.  
Press Back (right softkey) to return to the previous view.  
1. Press /> Multimedia > My Music.  
2. Highlight a folder.  
Pause and Resume  
Tip: The Songs folder contains all the audio files, except  
To pause a playing audio file, press Pause (left  
softkey).  
podcasts, on the memory card in a single list.  
To resume playing a paused audio file, press Play  
(left softkey).  
To quickly navigate through lists, enter the first letter of a  
file or folder to skip to the entries beginning with that letter.  
3. To play the first audio file in the folder, press Play  
(left softkey). (If the folder you scrolled to contains  
subfolders, this plays the first audio file in the first of  
these subfolders.)  
Skip to Next and Skip to Previous  
To skip to the next audio file, press the navigation  
key to the right.  
To skip to the previous audio file, press the  
navigation key to the left.  
– or –  
Press rto view the contents of the folder. Then  
highlight a file and press Play (left softkey) or press  
rto play it.  
Fast-Forward and Rewind  
To fast-forward a playing audio file, press and hold  
the navigation key to the right.  
146  
       
To rewind a playing audio file, press and hold the  
navigation key to the left.  
To set repeat:  
1. While viewing a list, viewing audio file details, or  
viewing visuals, press /> Setup.  
Adjusting the Volume  
2. Highlight Repeat and then press the navigation key  
To adjust the volume, use the volume button.  
right or left to select an option:  
Playing Music in the Background  
All to repeat the list from the beginning.  
One to repeat the current song.  
Off to turn repeat off.  
Your phone can continue to play music in the  
background while you are accessing other features.  
To play music in the background:  
3. Press Back (right softkey) to return to the previous  
screen.  
With music playing, press /> Hide Player.  
To set shuffle:  
The music player continues playing and the display  
returns to standby mode. To return to the music player,  
press Music (right softkey).  
1. While viewing a list, viewing audio file details, or  
viewing visuals, press /> Setup.  
Playing a List and Using Repeat and Shuffle  
2. Highlight Shuffle and then press the navigation key  
right or left to select On or Off.  
You can play audio files in a selected list in order  
(default), you can select the Repeat option to have a list  
or song repeat automatically, or you can select the  
Shuffle option to have the files play continuously in  
random order.  
3. Press Back (right softkey) to return to the previous  
screen.  
147  
   
DRM Items  
Note: If you do not assign a name, the playlist is named  
“Playlist” followed by the number of unnamed playlists  
you have. For example, the first unnamed playlist you  
create will be named “Playlist-1”.  
Some of the audio files on the memory card may be  
DRM (digital rights management) items. When a DRM  
items has expired, you can no longer play it.  
3. Select [Add Songs]. (You will see a list of available  
If you highlight an audio file that is expired and try to  
play it, a message saying you cannot play it appears. If  
you play a list containing an expired audio file, My  
Music skips over the expired item and no message is  
displayed.  
audio files.)  
4. Select each audio file for the playlist. A checkmark  
appears next to each selected file.  
5. When you are finished selecting files, press Done  
(left softkey).  
Working With Playlists  
6. Press Save (left softkey).  
Playlists let you group audio files that you’d like to hear  
together. Adding or removing songs from playlists, or  
deleting entire playlists, does not copy, move, or delete  
files from your memory card.  
Editing a Playlist  
After you have created a playlist, you can change its  
name, add audio files, remove audio files, and change  
the order of the audio files.  
Creating a Playlist  
1. Press /> Multimedia > My Music > Playlists.  
2. Highlight a playlist and press /> Edit Playlist.  
3. Make your changes and press Save (left softkey).  
1. Press /> Multimedia > My Music > Playlists >  
[Create New] > Name.  
2. Enter a name and press r.  
148  
       
3. Press Save (left softkey).  
Reordering a Playlist  
To remove all files from a playlist:  
You can change the order of the audio files on a  
playlist.  
1. Before you have saved a new playlist or while  
editing a playlist, press /> Remove All Songs.  
1. Before you have saved a new playlist or while  
editing a playlist, press /> Reorder Songs.  
2. Press ror Yes (left softkey) to confirm.  
2. Highlight a title and press Grab (left softkey).  
3. Add new songs to the playlist and then press Save  
(left softkey).  
3. Highlight a new location and press Insert (left  
softkey).  
Note: Empty playlists cannot be saved.  
4. Repeat steps 2 and 3 for all the items you are  
moving.  
Deleting Playlists  
To delete a playlist:  
5. Press Done (right softkey) and then press Save (left  
softkey).  
1. Press /> Multimedia > My Music > Playlists.  
2. Highlight a playlist and press /> Delete Playlist.  
3. Press Yes (left softkey) to confirm.  
To delete all playlists:  
Removing Files From Playlists  
You can remove some or all audio files from a playlist.  
To remove a file from a playlist:  
1. Before you have saved a new playlist or while  
1. Press /> Multimedia > My Music > Playlists.  
2. Press /> Delete All Playlists.  
3. Press Yes (left softkey) to confirm.  
This deletes all playlists except Favorites.  
editing a playlist, press /.  
2. Highlight an audio file and press />  
Remove Song.  
149  
 
2. Scroll to view individual podcast episodes or  
folders containing multiple episodes of the same  
program.  
Using the Favorites Playlist  
The Favorites playlist is a permanent playlist. You can  
add, remove, and change the order of the files, but you  
cannot rename it or delete it.  
3. Press rto view the podcast episodes within a  
folder or the details screen of an individual  
podcast episode.  
You can add audio files to the Favorites playlist as you  
would any other playlist.  
4. To play a selected podcast, press Play (left softkey).  
You can also add audio files to the Favorites playlist  
using the Add to Favorites shortcut.  
Deleting Audio Files  
To add the current audio file to Favorites:  
You can delete audio files from the memory card one  
at a time, by album, by artist, or by genre, or by deleting  
everything in the Songs, Albums, Artists, or Genres  
folders.  
While viewing a list, viewing the details of the audio  
file currently playing, or viewing visuals, press />  
Add to Favorites.  
To add any audio file to Favorites:  
Deleting an Audio File  
1. Press /> Multimedia > My Music > Songs.  
2. Highlight a file and press /> Add to Favorites.  
1. Press /> Multimedia > My Music.  
2. Select the folder containing the audio file.  
3. Highlight the audio file and press /> Delete Song  
Podcasts  
or Delete Podcast.  
To access and play podcasts:  
4. Press Yes (left softkey) to confirm.  
1. Press /> Multimedia > My Music > Podcasts.  
150  
     
Deleting an Album, Artist, or Genre  
Setting Audio and Visual Options  
1. Press /> Multimedia > My Music.  
You can customize the sound of My Music by setting  
the equalizer. You can customize the look of My Music  
screen by choosing a theme or by viewing visuals  
while listening to an audio file.  
2. Select the folder containing the audio files: Albums,  
Artists, or Genres.  
3. Highlight an album, artist, or genre, and press />  
Delete Album, Delete Artist, or Delete Genre.  
Setting the Equalizer  
4. Press Yes (left softkey) to confirm.  
1. From anywhere in My Music, press /> Setup >  
Equalizer.  
Deleting All Audio Files  
2. Select a mode and press Back (right softkey).  
Viewing Visuals  
Deleting everything in the Songs, Albums, Artists, or  
Genres folder deletes all audio files from the memory  
card.  
To view visuals instead of song details:  
1. Press /> Multimedia > My Music > Songs,  
Albums, Artists, or Genres.  
1. While viewing the details of the audio file currently  
playing, press /> Setup > Visuals, and use the  
navigation key to select an option.  
2. Press /> Delete Songs > /> All.  
3. Press ror Yes (left softkey) to confirm.  
2. Press Back (right softkey).  
To view song details instead of visuals:  
Deleting All Podcasts  
1. While viewing visuals press /> Setup >  
Visuals > Off.  
1. Press /> Multimedia > My Music > Podcasts >  
/> Delete Podcasts.  
2. Press Back (right softkey).  
2. Press ror Yes (left softkey) to confirm.  
151  
     
Delete Multiple lets you choose multiple images to  
delete at one time.  
My Images  
Switch to Phone/Card toggles between images stored  
on the phone or memory card.  
The My Images application lets you easily browse, edit  
and view a slideshow of images on your phone or  
memory card on your internal display, or browse, view  
a slideshow on the external display.  
Set as internal/external wallpaper sets the highlighted  
image as the phone’s internal or external wallpaper.  
Set As Caller ID sets the highlighted image as the  
caller ID for a contact.  
My Images Menu  
The My Images menu has many image management  
features. The following options are available for existing  
Send Via Bluetooth lets you send image via Bluetooth.  
images by pressing /> Multimedia > My Images > /. Viewing Images  
Edit displays several options for editing your photos  
including: Crop, Rotate/Flip, Color Adjustment,  
Resize, Borders, Stamps, Text, and Text Bubble.  
1. Press /> Multimedia > My Images or press />  
Games and Apps > My Images.  
2. Press /> SlideShow to view a show of all images  
in the current folder.  
SlideShow starts a slideshow containing images from  
the currently highlighted image.  
3. Press the navigation key left or right to scroll  
through the images.  
Save as New lets you save an image with a new  
name.  
Preview displays the highlighted image.  
Rename lets you rename the image.  
Delete Current deletes the highlighted image.  
152  
         
When viewing a slideshow on the external display,  
use the Pause/Play button (X) to control the show.  
Editing Images  
My Images has several options for editing your photos  
including: Crop, Rotate/Flip, Color Adjustments, Resize,  
Borders, Stamps, Text, and Text Bubble.  
Press (to suspend the My Images application and  
go to the external display menu.  
Press /> Multimedia > My Images > /> Edit  
and follow the prompts to edit the picture.  
My Videos  
The My Videos application lets you easily browse and  
view video files on your phone or memory card.  
My Images on the External Display  
You can launch My Images on the external display by  
closing the flip while in the My Images application, by  
pressing the Camera Viewfinder toggle key while in  
Camera mode, or by pressing the Smart Button (()  
and selecting My Images from the menu.  
Press /> Multimedia > My Videos or press />  
Games and Apps > My Videos.  
Note: Video File Formats: My Videos does not support all  
video file formats or resolutions and bit/frame rates.  
Supported extensions include .3gp, .asf, .mp4, .rm,  
.rmvb, .mpg, and .wmv.  
The available images are shown using thumbnails at  
the bottom of the display. The thumbnails scroll as you  
move through the images.  
Viewing Videos  
Use the lighted touch controls to control My Images  
from the external display:  
From the My Videos display, highlight a video and  
press rto begin playback.  
When viewing single images on the external display  
use the Previous/Rewind (J) and Next/Fast Forward  
(K) buttons to scroll through the images.  
My Videos will display the video in portrait mode  
by default.  
To change the default to landscape mode  
press /> Full Screen.  
153  
         
When viewing a video, use the rbutton to  
pause or play the video playback.  
Use the lighted touch controls to control My Videos  
from the external display:  
Press and hold the navigation key to the right to  
fast forward the video.  
When viewing a video on the external display, use  
the Pause/Play (X) button to control the video  
playback. Press and hold the Next/Fast Forward (K)  
button to fast forward the video. Press and hold the  
Previous/Rewind (J) button to rewind the video.  
Press and hold the navigation key to the left to  
rewind the video.  
My Videos Setup Menu  
When viewing videos on the external display press  
the Previous/Rewind (J) and Next/Fast Forward (K)  
buttons to scroll through available videos.  
Press /> Multimedia > My Videos > /> Setup.  
The My Videos Setup Menu allows you to change  
settings for View, 3D Audio and Reverbs.  
Press the Smart Button (() to suspend My Videos  
and go to the external display menu.  
My Videos on the External Display  
You can launch My Videos on the external display by  
closing the flip while in the My Videos application, by  
pressing the Camcorder Viewfinder toggle key while in  
Camera mode, or by pressing the Smart Button (()  
and selecting My Videos from the menu.  
154  
 
Safety and Warranty  
Information  
Failure to read and follow the information provided in this  
phone guide may result in serious bodily injury, death, or  
property damage.  
S1. Important Safety  
Information  
General Precautions  
There are several simple guidelines to operating your phone  
properly and maintaining safe, satisfactory service.  
To maximize performance, do not touch the bottom portion  
of your phone where the internal antenna is located while  
using the phone.  
Speak directly into the mouthpiece.  
Avoid exposing your phone and accessories to rain or liquid  
spills. If your phone does get wet, immediately turn the  
power off and remove the battery.  
Do not expose your phone to direct sunlight for extended  
periods of time (such as on the dashboard of a car).  
Although your phone is quite sturdy, it is a complex piece of  
equipment and can be broken. Avoid dropping, hitting,  
bending, or sitting on it.  
Any changes or modifications to your phone not expressly  
approved in this document could void your warranty for this  
equipment and void your authority to operate this  
equipment.  
156  
       
Note: For the best care of your phone, only authorized personnel  
should service your phone and accessories. Failure to do  
so may be dangerous and void your warranty.  
Tip: Purchase an optional hands-free accessory at your local  
Sprint Store, or call Nextel at 1-866-866-7509.  
Following Safety Guidelines  
Maintaining Safe Use of and Access  
to Your Phone  
To operate your phone safely and efficiently, always follow any  
special regulations in a given area. Turn your phone off in areas  
where use is forbidden or when it may cause interference or  
danger.  
Do Not Rely on Your Phone for Emergency Calls  
Using Your Phone Near Other Electronic Devices  
Mobile phones operate using radio signals, which cannot  
guarantee connection in all conditions. Therefore you should  
never rely solely upon any mobile phone for essential  
communication (e.g., medical emergencies). Emergency calls  
may not be possible on all cellular networks or when certain  
network services or mobile phone features are in use. Check  
with your local service provider for details.  
Most modern electronic equipment is shielded from radio  
frequency (RF) signals. However, RF signals from wireless  
phones may affect inadequately shielded electronic  
equipment.  
RF signals may affect improperly installed or inadequately  
shielded electronic operating systems or entertainment  
systems in motor vehicles. Check with the manufacturer or their  
representative to determine if these systems are adequately  
shielded from external RF signals. Also check with the  
manufacturer regarding any equipment that has been added to  
your vehicle.  
Using Your Phone While Driving  
Talking on your phone while driving (or operating the phone  
without a hands-free device) is prohibited in some jurisdictions.  
Laws vary as to specific restrictions. Remember that safety  
always comes first.  
Consult the manufacturer of any personal medical devices,  
such as pacemakers and hearing aids, to determine if they are  
adequately shielded from external RF signals.  
Responsible driving practices can be found in “Smart Practices  
While Driving” on page 173 and/or at the Motorola website:  
www.motorola.com/callsmart.  
157  
   
When using your radio product as a traditional  
two-way radio, hold the radio product in a  
vertical position with the microphone one to  
two inches (2.5 to 5 cm) away from the lips.  
Operational Precautions  
Note: Always turn off the phone in healthcare facilities, and  
request permission before using the phone near medical  
equipment.  
If you wear a radio product on your body when  
transmitting, always place the radio product in  
To assure optimal radio product performance and to be sure  
that human exposure to RF does not exceed the guidelines set  
forth in the relevant standards, always follow these instructions  
and precautions:  
a Motorola approved clip, holder, holster, case or body harness.  
If you do not use a body-worn accessory supplied or approved  
by Motorola and are not using the radio product in the intended  
use positions along side the head in the phone mode or in  
front of the face in the two-way radio mode, or if you hang your  
device from a lanyard around your neck, keep the device at  
least 2.5 centimeters (1 inch) from your body when transmitting.  
Phone Operation  
When placing or receiving a phone call, hold your radio  
product as you would a wireline telephone. Speak directly into  
the microphone.  
Approved Accessories  
Two-way Radio Operation  
For a list of approved Motorola accessories call 1-800-453-0920,  
or visit our website at www.motorola.com/phoneaccessories.  
Your radio product has been designed and tested to comply  
with national and international standards and guidelines  
regarding human exposure to RF electromagnetic energy,  
when operated in the two-way mode (at the face, or at the  
abdomen when using an audio accessory) at usage factors of  
up to 50% talk/50% listen.  
Turning Off Your Phone Before Flying  
Turn off your phone before boarding any aircraft. To prevent  
possible interference with aircraft systems, the U.S. Federal  
Aviation Administration (FAA) regulations require you to have  
permission from a crew member to use your phone while  
the plane is on the ground. To prevent any risk of interference,  
FCC regulations prohibit using your phone while the plane is in  
the air.  
Transmit no more than the rated duty factor of 50% of the time.  
To transmit (talk), push the PTT button. To receive calls, release  
the PTT button. Transmitting 50% of the time or less, is  
important because this radio generates measurable RF energy  
only when transmitting (in terms of measuring for standards  
compliance).  
158  
A choking hazard may exist for small, detachable parts.  
Turning Off Your Phone in Dangerous Areas  
Improper use could result in loud sounds, possibly causing  
hearing injury.  
To avoid interfering with blasting operations, turn your phone  
off when in a blasting area or in other areas with signs  
indicating two-way radios should be turned off. Construction  
crews often use remote-control RF devices to set off explosives.  
Improperly handled batteries could overheat and cause a  
burn.  
Do not allow children to play with your phone as they could  
hurt themselves and others, damage the phone or make calls  
that increase your invoice.  
Turn your phone off when you’re in any area that has a  
potentially explosive atmosphere. Although it’s rare, your phone  
and accessories could generate sparks. Sparks can cause an  
explosion or fire, resulting in bodily injury or even death. These  
areas are often, but not always, clearly marked. They include:  
Glass Parts  
Some parts of your phone may be made of glass. This glass  
could break if the product is dropped on a hard surface or  
receives a substantial impact. If glass breaks, do not touch or  
attempt to remove. Stop using your phone until the glass is  
replaced by a qualified service center.  
Fueling areas such as gas stations.  
Below deck on boats.  
Fuel or chemical transfer or storage facilities.  
Areas where the air contains chemicals or particles such  
as grain, dust, or metal powders.  
Seizures/Blackouts  
Any other area where you would normally be advised to  
Some people may be susceptible to epileptic seizures or  
blackouts when exposed to flashing lights, such as when  
playing video games. These may occur even if a person has  
never had a previous seizure or blackout.  
turn off your vehicle’s engine.  
Note: Never transport or store flammable gas, flammable liquids,  
or explosives in the compartment of your vehicle that  
contains your phone or accessories.  
If you have experienced seizures or blackouts, or if you have a  
family history of such occurrences, please consult with your  
physician before playing video games or enabling a flashing-  
lights feature (if available) on your phone.  
Keep Your Mobile Device and Its Accessories Away  
From Small Children  
These products are not toys and may be hazardous to children.  
For example:  
Discontinue use and consult a physician if any of the following  
symptoms occur: convulsion, eye or muscle twitching, loss of  
159  
awareness, involuntary movements, or disorientation. It is  
always a good idea to hold the screen away from your eyes,  
leave the lights on in the room, take a 15-minute break every  
hour, and stop use if you are very tired.  
Repetitive Motion  
When you repetitively perform actions such as pressing keys or  
entering finger-written characters, you may experience  
occasional discomfort in your hands, arms, shoulders, neck, or  
other parts of your body. If you continue to have discomfort  
during or after such use, stop use and see a physician.  
Caution About High Volume Usage  
Battery Use and Safety  
WARNING: Exposure to loud noise from any source for extended  
periods of time may affect your hearing. The louder  
the volume sound level, the less time is required  
before your hearing could be affected.  
Important: HANDLE AND STORE BATTERIES PROPERLY TO  
AVOID INJURY OR DAMAGE. Most battery issues  
arise from improper handling of batteries, and  
particularly from the continued use of damaged  
batteries.  
To protect your hearing:  
Limit the amount of time you use headsets or headphones at  
high volume.  
Avoid turning up the volume to block out noisy surroundings.  
DON’Ts  
Turn the volume down if you can’t hear people speaking  
near you.  
Don’t disassemble, crush, puncture, shred, or otherwise  
attempt to change the form of your battery.  
If you experience hearing discomfort, including the sensation of  
pressure or fullness in your ears, ringing in your ears, or  
muffled speech, you should stop listening to the device through  
your headset or headphones and have your hearing checked.  
Don’t let the phone or battery come in contact with water.  
Water can get into the phone’s circuits, leading to corrosion.  
If the phone and/or battery get wet, have them checked by  
your carrier or contact Motorola, even if they appear to be  
working properly.  
For more information about hearing, see our website at  
direct.motorola.com/hellomoto/nss/AcousticSafety.asp (in English  
only).  
Don’t allow the battery to touch metal objects. If metal  
objects, such as jewelry, stay in prolonged contact with the  
battery contact points, the battery could become very hot.  
160  
     
Don’t place your battery near a heat source. Excessive heat  
can damage the phone or the battery. High temperatures  
can cause the battery to swell, leak, or malfunction.  
Therefore:  
display such as Invalid Battery or Unable to Charge, take the  
following steps:  
Remove the battery and inspect it to confirm that it has a  
“Motorola Original” hologram;  
Do not dry a wet or damp battery with an appliance or  
heat source, such as a hair dryer or microwave oven.  
If there is no hologram, the battery is not a Motorola battery;  
If there is a hologram, replace the battery and retry charging  
it;  
Avoid leaving your phone in your car in high  
temperatures.  
If the message remains, contact a Motorola Authorized  
Service Center.  
DOs  
Important: Motorola’s warranty does not cover damage to the  
phone caused by non-Motorola batteries and/or  
chargers.  
Do avoid dropping the battery or phone. Dropping these  
items, especially on a hard surface, can potentially cause  
damage.  
Do contact your service provider or Motorola if your phone  
or battery has been damaged from dropping or high  
temperatures.  
WARNING: Use of a non-Motorola battery or charger may  
present a risk of fire, explosion, leakage, or other  
hazard.  
Important: USE MOTOROLA ORIGINAL PRODUCTS FOR  
QUALITY ASSURANCE AND SAFEGUARDS. To aid  
consumers in identifying authentic Motorola batteries  
from non-original or counterfeit batteries (that may not  
have adequate safety protection), Motorola provides  
holograms on its batteries. Consumers should  
confirm that any battery they purchase has a  
Proper and Safe Battery Disposal and Recycling  
Proper battery disposal is not only important for safety, it  
benefits the environment. Consumers may recycle their used  
batteries in many retail or service provider locations. Additional  
information on proper disposal and recycling may be found on  
the Web:  
“Motorola Original” hologram.  
www.motorola.com/recycling  
Motorola recommends you always use Motorola-branded  
batteries and chargers. Motorola mobile devices are designed  
to work with Motorola batteries. If you see a message on your  
www.rbrc.org/call2recycle/ (in English only)  
161  
Disposal of Lithium Ion (LiIon) Batteries: Promptly  
dispose of used batteries in accordance with local  
regulations. Contact your local recycling center or  
national recycling organizations for more information  
on how to dispose of batteries.  
counterfeit or inexpensive, aftermarket-brand batteries with  
unknown or questionable manufacturing standards. Nextel is  
not aware of similar problems with Nextel phones resulting  
from the proper use of batteries and accessories approved  
by Nextel or the manufacturer of your phone. Use only  
Nextel-approved or manufacturer-approved batteries and  
accessories found at Sprint Stores or through your phone’s  
manufacturer, or call 1-866-866-7509 to order. They’re also  
available at www.nextel.com — click Accessories. Buying the  
right batteries and accessories is the best way to ensure  
they’re genuine and safe.  
Do not handle a damaged or leaking Li-Ion battery as you can  
be burned.  
WARNING: Never dispose of batteries in a fire because they may  
explode.  
Special Note: Be sure to dispose of your battery properly. In  
some areas, the disposal of batteries in household or business  
trash may be prohibited.  
In order to avoid damage, charge the battery only in  
temperatures that range from 32° F to 113° F (0° C to 45° C).  
Don’t use the battery charger in direct sunlight or in high  
humidity areas, such as the bathroom.  
Protecting Your Battery  
The guidelines listed below help you get the most out of your  
battery’s performance.  
Never dispose of the battery by incineration.  
Keep the metal contacts on top of the battery clean.  
Don’t attempt to disassemble or short-circuit the battery.  
In very limited circumstances, such as where your phone  
has been exposed to extreme heat Cool Down message  
screens will appear. To avoid possible damage to your  
battery and phone, you should follow these instructions until  
the phone is within its recommended temperature range.  
When your phone is in Cool Down mode, only emergency  
calls may be made.  
The battery may need recharging if it has not been used for  
a long period of time.  
It’s best to replace the battery when it no longer provides  
acceptable performance. It can be recharged hundreds of  
times before it needs replacing.  
Recently there have been some public reports of wireless  
phone batteries overheating, catching fire, or exploding. It  
appears that many, if not all, of these reports involve  
162  
 
Don’t store the battery in high temperature areas for long  
periods of time. It’s best to follow these storage rules:  
Symbol  
Definition  
Your phone contains an internal  
lithium ion battery.  
Less than one month:  
-4° F to 140° F (-20° C to 60° C)  
Li Ion BATT  
032378o  
More than one month:  
-4° F to 113° F (-20° C to 45° C)  
Do not let your battery, charger, or  
phone get wet.  
Batteries and Chargers  
Your battery, charger, or portable radio may contain symbols,  
defined as follows:  
Listening at full volume to music  
or voice through a headset may  
damage your hearing.  
Symbol  
Definition  
Using Your Phone With a Hearing  
Aid Device  
032374o  
Important safety information  
follows.  
A number of Nextel phones have been tested for hearing aid  
device compatibility. When some wireless phones are used  
with certain hearing devices (including hearing aids and  
cochlear implants), users may detect a noise which can  
interfere with the effectiveness of the hearing device.  
Do not dispose of your battery or  
phone in a fire.  
Your battery or phone may require  
recycling in accordance with local  
laws. Contact your local regulatory  
authorities for more information.  
032375o  
Some hearing devices are more immune than others to this  
interference noise, and phones also vary in the amount of  
interference noise they may generate. ANSI standard C63.19  
was developed to provide a standardized means of measuring  
both wireless phone and hearing devices to determine usability  
rating categories for both.  
Do not throw your battery or  
phone in the trash.  
163  
     
Ratings have been developed for mobile phones to assist  
hearing device users find phones that may be compatible with  
their hearing device. Not all phones have been rated for  
compatibility with hearing devices. Phones that have been  
rated have a label with the rating(s) located on the box, and are  
listed at www.motorola.com/accessibility.  
Note: This phone has been tested and rated for use with hearing  
aids for some of the wireless technologies that it uses.  
However, there may be some newer wireless technologies  
used in this phone that have not been tested yet for use with  
hearing aids. It is important to try the different features of this  
phone thoroughly and in different locations, using your  
hearing aid or cochlear implant, to determine if you hear  
any interfering noise. Consult your service provider about  
its return and exchange policies and for information on  
hearing aid compatibility.  
These ratings are not guarantees. Results will vary depending  
on the user’s hearing device and individual type and degree of  
hearing loss. If a hearing device is particularly vulnerable to  
interference noise; even a phone with a higher rating may still  
cause unacceptable noise levels in the hearing device. Trying  
out the phone with your hearing device is the best way to  
evaluate it for your personal needs.  
Hearing aid devices may also be measured for immunity to  
interference noise from wireless phones and should have  
ratings similar to phones. Ask your hearing health care  
professional for the rating of your hearing aid. Add the rating of  
your hearing aid and your phone to determine probable  
usability:  
M-Ratings: Phones rated M3 or M4 meet FCC requirements  
for hearing aid compatibility and are likely to generate less  
interference to hearing devices than unrated phones. (M4 is the  
better/higher of the two ratings.)  
Any combined rating equal to or greater than six offers  
excellent use.  
T-Ratings: Phones rated T3 or T4 meet FCC requirements and  
are likely to be more usable with a hearing device’s telecoil (“T  
Switch”or “Telephone Switch”) than unrated phones. (T4 is the  
better/higher of the two ratings. Note that not all hearing  
devices have telecoils in them.)  
Any combined rating equal to five is considered normal use.  
Any combined rating equal to four is considered usable.  
Thus, if you pair an M3 hearing aid with an M3 phone, you will  
have a combined rating of six for “excellent use.”This is  
synonymous for T ratings.  
Nextel further suggests you experiment with multiple phones  
(even those not labeled M3/T3 or M4/T4) while in the store to  
find the one that works best with your hearing aid device.  
Should you experience interference or find the quality of  
164  
service unsatisfactory after purchasing your phone, promptly  
return it to the store within 30 days of purchase. (A restocking  
fee may be applied to exchanges. Visit www.sprint.com/returns  
for details.) More information about hearing aid compatibility  
may be found at:  
www.motorola.com/accessibility, www.fcc.gov, www.fda.gov, and  
www.accesswireless.org.  
Caring for the Environment by  
Recycling  
This symbol on a Motorola product means the product  
should not be disposed of with household waste.  
Getting the Best Hearing Device Experience With  
Your Phone  
Disposal of your Mobile Device and Accessories  
Please do not dispose of mobile devices or electrical  
accessories (such as chargers, headsets, or batteries) with  
your household waste. These items should be disposed of in  
accordance with the national collection and recycling schemes  
operated by your local or regional authority. Alternatively, you  
may return unwanted mobile devices and electrical  
accessories to any Motorola Approved Service Center in your  
region. Details of Motorola approved national recycling  
schemes, and further information on Motorola recycling  
activities can be found at: www.motorola.com/recycling.  
To further minimize interference:  
Set the phone’s display and keypad backlight settings to  
ensure the minimum time interval:  
1. Press /> Settings > Display/Info > Backlight > Timer  
or Java Timer.  
2. Highlight the minimum time interval setting and press r.  
Position the phone so the internal antenna is farthest from  
your hearing aid.  
Move the phone around to find the point with least  
interference.  
Disposal of your Mobile Device Packaging and  
User’s Guide  
Product packaging and user’s guides should only be disposed  
of in accordance with national collection and recycling  
requirements. Please contact your regional authorities for more  
details.  
165  
 
Exposure to Radio Frequency (RF) Energy  
Export Law Assurances  
Your mobile device contains a transmitter and receiver. When it  
is ON, it receives and transmits RF energy. When you  
communicate with your mobile device, the system handling  
your call controls the power level at which your mobile device  
transmits.  
This product is controlled under the export regulations of the  
United States of America and Canada. The Governments of the  
United States of America and Canada may restrict the  
exportation or re-exportation of this product to certain  
destinations. For further information contact the U.S.  
Department of Commerce or the Canadian Department of  
Foreign Affairs and International Trade.  
Your Motorola mobile device is designed to comply with local  
regulatory requirements in your country concerning exposure  
of human beings to RF energy.  
Operational Precautions  
California Perchlorate Label  
For optimal mobile device performance, and to be sure that  
human exposure to RF energy does not exceed the guidelines  
set forth in the relevant standards, always follow these  
instructions and precautions.  
Some mobile phones use an internal, permanent backup  
battery on the printed circuit board that may contain very small  
amounts of perchlorate. In such cases, California law requires  
the following label:  
Product Operation  
When placing or receiving a phone call, hold your mobile  
device just like you would a landline phone.  
Perchlorate Material – special handling may apply. See  
www.dtsc.ca.gov/hazardouswaste/perchlorate. There is no special  
handling required by consumers.  
If you wear the mobile device on your body, always place the  
mobile device in a Motorola-supplied or approved clip, holder,  
holster, case, or body harness. If you do not use a body-worn  
accessory supplied or approved by Motorola—or if you hang  
your mobile device from a lanyard around your neck—keep the  
mobile device and its antenna at least 2.5 centimeters (1 inch)  
from your body when transmitting.  
Radio Frequency (RF) Energy  
This section contains important information on the safe and  
efficient operation of your mobile device. Read this  
information before using your mobile device.  
166  
         
Using accessories not supplied or approved by Motorola may  
cause your mobile device to exceed RF energy exposure  
guidelines. For a list of Motorola-supplied or approved  
accessories, visit our website at: www.motorola.com.  
Persons with implantable medical devices should observe the  
following precautions:  
ALWAYS keep the mobile device more than 20 centimeters  
(8 inches) from the implantable medical device when the  
mobile device is turned ON.  
RF Energy Interference/Compatibility  
DO NOT carry the mobile device in the breast pocket.  
Nearly every electronic device is subject to RF energy  
interference from external sources if inadequately shielded,  
designed, or otherwise configured for RF energy compatibility.  
In some circumstances your mobile device may cause  
interference with other devices.  
Use the ear opposite the implantable medical device to  
minimize the potential for interference.  
Turn OFF the mobile device immediately if you have any  
reason to suspect that interference is taking place.  
Read and follow the directions from the manufacturer of your  
implantable medical device. If you have any questions about  
using your mobile device with your implantable medical  
device, consult your healthcare provider.  
Follow Instructions to Avoid Interference Problems  
Turn off your mobile device in any location where posted  
notices instruct you to do so.  
In an aircraft, turn off your mobile device whenever instructed  
Driving Precautions  
The use of wireless phones while driving may cause  
distraction. Discontinue a call if you can’t concentrate on  
driving.  
to do so by airline staff.  
If your mobile device offers an airplane mode or similar  
feature, consult airline staff about using it in flight.  
Implantable Medical Devices  
Additionally, the use of wireless devices and their accessories  
may be prohibited or restricted in certain areas. Always obey  
the laws and regulations on the use of these products.  
If you have an implantable medical device, such as a  
pacemaker or defibrillator, consult your physician before using  
this mobile device.  
Responsible driving practices can be found in the “Smart  
Practices While Driving” section in this guide (or separate  
guide).  
167  
National Council of Radiation Protection and Measurements  
(NCRP).  
Operational Warnings  
Obey all posted signs when using mobile devices in public  
areas.  
Body-Worn Operation  
To maintain compliance with FCC RF exposure guidelines, if  
you wear a handset on your body, use the Motorola supplied or  
approved carrying case, holster or other body-worn accessory.  
If you do not use a body-worn accessory, ensure the antenna is  
at least 2.5 centimeters from your body when transmitting. Use  
of non-Motorola-approved accessories may violate FCC RF  
exposure guidelines.  
Potentially Explosive Atmospheres  
Areas with potentially explosive atmospheres are often, but not  
always, posted and can include fueling areas, such as below  
decks on boats, fuel or chemical transfer or storage facilities, or  
areas where the air contains chemicals or particles, such as  
grain dust, or metal powders.  
When you are in such an area, turn off your mobile device, and  
do not remove, install, or charge batteries. In such areas,  
sparks can occur and cause an explosion or fire.  
Your Motorola phone is designed to comply with local  
regulatory requirements in your country concerning exposure  
of human beings to RF energy.  
For more information about RF exposure, visit the FCC website  
at www.fcc.gov.  
Knowing Radio Frequency Safety  
The design of your phone complies with updated NCRP standards  
described below.  
Portable Radio Product Operation and EME Exposure  
In 1991–92, the Institute of Electrical and Electronics Engineers  
(IEEE) and the American National Standards Institute (ANSI) joined  
in updating ANSI’s 1982 standard for safety levels with respect to  
human exposure to RF signals. More than 120 scientists, engineers  
and physicians from universities, government health agencies and  
industries developed this updated standard after reviewing the  
available body of research. In 1993, the Federal Communications  
Commission (FCC) adopted this updated standard in a regulation.  
In August 1996, the FCC adopted hybrid standard consisting of the  
existing ANSI/IEEE standard and the guidelines published by the  
Your Motorola radio product is designed to comply with the  
following national and international standards and guidelines  
regarding exposure of human beings to radio frequency  
electromagnetic energy (EME):  
United States Federal Communications Commission, Code  
of Federal Regulations; 47 CFR part 2 sub-part J.  
168  
American National Standards Institute (ANSI) / Institute of  
Electrical and Electronics Engineers (IEEE). C95. 1-1992.  
Specific Absorption Rate  
Your i890 model wireless phone meets the governmental  
requirements for exposure to radio waves.  
Institute of Electrical and Electronics Engineers (IEEE). C95.  
1-2005 Edition.1  
Your wireless phone is a radio transmitter and receiver. It is  
designed and manufactured to not exceed limits for exposure  
to radio frequency (RF) energy set by the Federal  
International Commission on Non-Ionizing Radiation  
Protection (ICNIRP) 1998.  
Ministry of Health (Canada). Safety Code 6. Limits of Human  
Exposure to Radio frequency Electromagnetic Fields in the  
Frequency Range from 3 kHz to 300 GHz, 1999.  
Communications Commission (FCC) of the U.S. Government  
and by the Canadian regulatory authorities. These limits are  
part of comprehensive guidelines and establish permitted  
levels of RF energy for the general population. The guidelines  
are based on standards that were developed by independent  
scientific organizations through periodic and thorough  
evaluation of scientific studies. The standards include a  
substantial safety margin designed for the safety of all persons,  
regardless of age or health, and to account for any variations in  
measurements.  
Australian Communications Authority Radio  
communications (Electromagnetic Radiation - Human  
Exposure) Standard 2003.  
ANATEL, Brazil Regulatory Authority, Resolution 303 (July 2,  
2002) “Regulation of the limitation of exposure to electrical,  
magnetic, and electromagnetic fields in the radio frequency  
range between 9 kHz and 300 GHz.” “Attachment to  
Resolution 303 from July 2, 2002.”  
The exposure standard for wireless mobile phones employs a  
unit of measurement known as the Specific Absorption Rate  
(SAR). The SAR limit set by the FCC and by the Canadian  
regulatory authorities is 1.6 watts per kilogram (W/kg),  
averaged over one gram of tissue. Tests for SAR are conducted  
using procedures accepted by the FCC and by Industry  
Canada with the phone transmitting at its highest certified  
power level in all tested frequencies. Although the SAR is  
determined at the highest certified power level, the actual SAR  
level of the phone while operating can be below the maximum  
value. This is because the phone is designed to operate at  
1.The information provided in this document supersedes the  
general safety information in user’s guides published prior to  
May 1, 2006.  
169  
multiple power levels so as to use only the power required to  
reach the network. In general, the closer you are to a wireless  
base station, the lower the power output.  
Owner’s Record  
The model number, regulatory number, and serial number are  
located on a nameplate inside the battery compartment.  
Record the serial number in the space provided below. This will  
be helpful if you need to contact us about your phone in the  
future.  
Before a phone model is available for sale to the public in the  
U.S. and Canada, it must be tested and certified to the FCC  
and Industry Canada that it does not exceed the limit  
established by each government for safe exposure. The tests  
are performed in positions and locations (e.g., at the ear and  
worn on the body) submitted to the FCC and available for  
review by Industry Canada. The highest SAR value for this  
model phone when tested for use at the ear is 0.45 W/kg, and  
when worn on the body, as described in this user guide, is  
0.63 W/kg. Body-worn measurements can differ, depending  
upon available accessories and regulatory requirements. The  
SAR information includes the Motorola testing protocol,  
assessment procedure, and measurement uncertainty range  
for this product.  
Model: i890  
Serial No.:  
Online Product Registration:  
http://www.motorola.com/us/productregistration  
Product registration is an important step toward enjoying your  
new Motorola product. Registration permits us to contact you  
for product or software updates and allows you to subscribe to  
updates on new products or special promotions. Registration is  
not required for warranty coverage. Please retain your original  
dated sales receipt, as you may need to provide it for warranty  
validation in the future.  
While there may be differences between the SAR levels of  
various phones and at various positions, they meet the  
governmental requirements for safe exposure. Please note that  
improvements to this product model could cause differences in  
the SAR value for later products; in all cases, products are  
designed to be within the guidelines.  
Thank you for choosing a Motorola product.  
Additional information on SAR can be found on the Cellular  
Telecommunications & Internet Association (CTIA) website:  
www.phonefacts.net or the Canadian Wireless  
Telecommunications Association (CWTA) website: www.cwta.ca.  
170  
   
Patent and Trademark Information  
Software Copyright Notice  
MOTOROLA, the Stylized M Logo and all other trademarks  
indicated as such herein are trademarks of Motorola, Inc.  
® Reg. U.S. Pat. & Tm. Off. ©2009 Motorola, Inc. All rights  
reserved.  
The Motorola products described in this manual may include  
copyrighted Motorola and third party software stored in  
semiconductor memories or other media. Laws in the United  
States and other countries preserve for Motorola and third party  
software providers certain exclusive rights for copyrighted  
software, such as the exclusive rights to distribute or reproduce  
the copyrighted software. Accordingly, any copyrighted  
software contained in the Motorola products may not be  
modified, reverse-engineered, distributed, or reproduced in any  
manner to the extent allowed by law. Furthermore, the  
purchase of the Motorola products shall not be deemed to  
grant either directly or by implication, estoppel, or otherwise,  
any license under the copyrights, patents, or patent  
Microsoft and Microsoft Internet Explorer are registered  
trademarks of Microsoft Corporation.  
T9 is a trademark owned by Tegic Communications.  
T9® Text Input Patent and Trademark Information.  
This product is covered by U.S. Pat. 5,818,437, U.S. Pat.  
5,953,541, U.S. Pat. 6,011,554 and other patents pending.  
Java and all other Java-based marks are trademarks or  
registered trademarks of Sun Microsystems, Inc. in the U.S. and  
other countries.  
applications of Motorola or any third party software provider,  
except for the normal, non-exclusive, royalty-free license to use  
that arises by operation of law in the sale of a product.  
All other product names or services mentioned in this manual  
are the property of their respective trademark owners.  
171  
   
Open Source Software Information  
Privacy and Data Security  
For instructions on how to obtain a copy of any source code  
being made publicly available by Motorola related to software  
used in this Motorola mobile device you may send your request  
in writing to:  
Motorola understands that privacy and data security are  
important to everyone. Because some features of your phone  
may affect your privacy or data security, please follow these  
recommendations to enhance protection of your information:  
MOTOROLA, INC.  
OSS Management  
600 North US Hwy 45  
Libertyville, IL 60048  
USA  
Monitor access: Keep your phone with you and do not leave  
it where others may have unmonitored access. Lock your  
device’s keypad where this feature is available.  
Keep software up to date: If Motorola or a software/  
application vendor releases a patch or software fix for your  
phone which updates the device’s security, install it as soon  
as possible.  
The Motorola website opensource.motorola.com also contains  
information regarding Motorola’s use of open source.  
Motorola has created the opensource.motorola.com to serve as a  
portal for interaction with the software community-at-large.  
Erase before recycling: Delete personal information or data  
from your phone prior to disposing of it or turning it in for  
recycling. For step-by-step instructions on how to delete all  
personal information from your device, please contact your  
local service provider.  
To view additional information regarding licenses,  
acknowledgments and required copyright notices for open  
source packages used in this Motorola mobile device, please  
press /> Games and Apps > Open Source Notices.  
Understanding AGPS: In order to comply with emergency  
caller location requirements of the FCC, certain Motorola  
phones incorporate Assisted Global Positioning System  
(AGPS) technology. AGPS technology also can be used in  
non-emergency applications to track and monitor a user’s  
location, for example, to provide driving directions. Users  
who prefer not to permit such tracking and monitoring  
should avoid using such applications.  
172  
 
If you have further questions regarding how use of your phone  
may impact your privacy or data security, please contact  
Motorola.  
Position your phone within easy reach. Be able to access  
your phone without removing your eyes from the road. If you  
receive an incoming call at an inconvenient time, if possible,  
let your voice mail answer it for you.  
Let the person you are speaking with know you are driving; if  
necessary, suspend the call in heavy traffic or hazardous  
weather conditions. Rain, sleet, snow, ice, and even heavy  
traffic can be hazardous.  
Smart Practices While Driving  
Drive Safe, Call Smart SM  
Do not take notes or look up phone numbers while driving.  
Jotting down a “to do” list or going through your address  
book takes attention away from your primary responsibility,  
driving safely.  
Check the laws and regulations on the use of mobile devices  
and their accessories in the areas where you drive. Always  
obey them. The use of these devices may be prohibited or  
restricted in certain areas. Contact www.motorola.com/callsmart  
for more information.  
Dial sensibly and assess the traffic; if possible, place calls  
when your car is not moving or before pulling into traffic. If  
you must make a call while moving, dial only a few numbers,  
check the road and your mirrors, then continue.  
Your mobile device lets you communicate by voice and data—  
almost anywhere, anytime, wherever wireless service is  
available and safe conditions allow. When driving a car, driving  
is your first responsibility. If you choose to use your mobile  
device while driving, remember the following tips:  
Do not engage in stressful or emotional conversations that  
may be distracting. Make people you are talking with aware  
you are driving and suspend conversations that can divert  
your attention away from the road.  
Get to know your Motorola phone and its features such as  
speed dial and redial. If available, these features help you to  
place your call without taking your attention off the road.  
Use your phone to call for help. Dial 911 or other local  
emergency number in the case of fire, traffic accident, or  
medical emergencies.*  
When available, use a hands-free device. If possible, add an  
additional layer of convenience to your phone with one of the  
many Motorola Original hands-free accessories available  
today.  
173  
 
Use your phone to help others in emergencies. If you see an  
auto accident, crime in progress, or other serious emergency  
where lives are in danger, call 911 or other local emergency  
number, as you would want others to do for you.*  
Call roadside assistance or a special non-emergency  
wireless assistance number when necessary. If you see a  
broken-down vehicle posing no serious hazard, a broken  
traffic signal, a minor traffic accident where no one appears  
injured, or a vehicle you know to be stolen, call roadside  
assistance or other special non-emergency wireless  
number.*  
* Wherever wireless phone service is available  
174  
 
Motorola Limited Warranty  
for the United States and Canada  
S2. Manufacturer’s Warranty  
What does this Warranty Cover?  
Subject to the exclusions contained below, Motorola, Inc.  
warrants its telephones, pagers, messaging devices, and  
consumer and professional two-way radios (excluding  
commercial, government or industrial radios) that operate via  
Family Radio Service or General Mobile Radio Service,  
Motorola-branded or certified accessories sold for use with  
these Products (“Accessories”) and Motorola software  
contained on CD-ROMs or other tangible media and sold for  
use with these Products (“Software”) to be free from defects in  
materials and workmanship under normal consumer usage for  
the period(s) outlined below. This limited warranty is a  
consumer's exclusive remedy, and applies as follows to new  
Motorola Products, Accessories and Software purchased by  
consumers in the United States or Canada, which are  
accompanied by this written warranty:  
Your phone has been designed to provide you with  
reliable, worry-free service. If for any reason you have a  
problem with your equipment, please refer to the  
manufacturer’s warranty in this section.  
For information regarding the terms and conditions of service  
for your phone, please visit www.nextel.com or call Nextel  
Customer Service at 1-800-639-6111.  
175  
     
Products and Accessories  
Products Covered  
Length of Coverage  
Products Covered  
Length of Coverage  
Products and  
Accessories that are  
Repaired or  
The balance of the original  
warranty or for ninety (90)  
days from the date returned to  
the consumer, whichever is  
longer.  
Products and  
One (1) year from the date of  
purchase by the first consumer  
purchaser of the product unless  
otherwise provided for below.  
Accessories as  
defined above,  
unless otherwise  
provided for below.  
Replaced.  
Decorative  
Limited lifetime warranty for  
the lifetime of ownership by  
the first consumer purchaser  
of the product.  
Exclusions  
Accessories and  
Cases. Decorative  
covers, bezels,  
PhoneWrap™  
Normal Wear and Tear. Periodic maintenance, repair and  
replacement of parts due to normal wear and tear are excluded  
from coverage.  
covers and cases.  
Batteries. Only batteries whose fully charged capacity falls  
below 80% of their rated capacity and batteries that leak are  
covered by this limited warranty.  
Monaural Headsets. Limited lifetime warranty for  
Ear buds and boom the lifetime of ownership by  
Abuse, Misuse and Accidents. Defects or damage that result  
from abuse, misuse or accidents, including but not limited to:  
(a) improper handling, usage, operation or storage (e.g.  
operating the Product outside its permitted or intended uses  
including as set forth by Motorola in the Products specification  
sheets or other documentation, or failing to comply with the  
Products usage documentation); abuse/neglect (e.g. broken/  
bent/missing clips/fasteners/connectors); (b) contact with  
liquids, water, rain, extreme humidity, heavy perspiration or  
other moisture, sand, food, dirt or similar substances caused  
from incorrectly securing the phone’s protective elements or  
headsets that  
the first consumer purchaser  
of the product.  
transmit mono  
sound through a  
wired connection.  
Consumer and  
Professional  
Two-Way Radio  
Accessories.  
Ninety (90) days from the date  
of purchase by the first  
consumer purchaser of the  
product.  
176  
subjecting the Products to conditions beyond their stated  
specification or limits; (c) use of the Products for commercial  
rental purposes; or (d) external causes or acts which are not  
the fault of Motorola, including but not limited to flood, fire,  
earthquake, tornado or other acts of God, are excluded from  
coverage.  
Software  
Products Covered  
Length of Coverage  
Ninety (90) days  
from the date of  
purchase.  
Software. Applies only to  
physical defects in the media  
that embodies the copy of the  
software (e.g. CD-ROM, or  
floppy disk).  
Use of Non-Motorola Products and Accessories. Defects or  
damage that result from the use of Non-Motorola branded or  
certified Products, Accessories, Software or other peripheral  
equipment are excluded from coverage.  
Exclusions  
Unauthorized Service or Modification. Defects or damages  
resulting from service, testing, adjustment, installation,  
maintenance, alteration, or modification in any way by  
someone other than Motorola, or its authorized service centers,  
are excluded from coverage.  
Software Embodied in Physical Media. No warranty is made  
that the software will meet your requirements or will work in  
combination with any hardware or software applications  
provided by third parties, that the operation of the software  
products will be uninterrupted or error free, or that all defects in  
the software products will be corrected.  
Altered Products. Products or Accessories with (a) serial  
numbers or date tags that have been removed, altered or  
obliterated; (b) broken seals or that show evidence of  
tampering; (c) mismatched board serial numbers; or (d)  
nonconforming or non-Motorola housings, or parts, are  
excluded from coverage.  
Software NOT Embodied in Physical Media. Software that is not  
embodied in physical media (e.g. software that is downloaded  
from the internet), is provided “as is” and without warranty.  
Who Is Covered?  
This warranty extends only to the first consumer purchaser, and  
is not transferable.  
Communication Services. Defects, damages, or the failure of  
Products, Accessories or Software due to any communication  
service or signal you may subscribe to or use with the Products  
Accessories or Software is excluded from coverage.  
177  
(a) a copy of your receipt, bill of sale or other comparable proof  
of purchase; (b) a written description of the problem; (c) the  
name of your service provider, if applicable; (d) the name and  
location of the installation facility (if applicable) and, most  
importantly; (e) your address and telephone number.  
What Will Motorola Do?  
Motorola, at its option, will at no charge repair, replace or refund  
the purchase price of any Products, Accessories or Software  
that does not conform to this warranty. We may use functionally  
equivalent reconditioned/refurbished/pre-owned or new  
Products, Accessories or parts. No data, software or  
applications added to your Product, Accessory or Software,  
including but not limited to personal contacts, games and  
ringer tones, will be reinstalled. To avoid losing such data,  
software and applications please create a back up prior to  
requesting service.  
What other limitations are there?  
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT  
LIMITATION THE IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS  
LIMITED WARRANTY, OTHERWISE THE REPAIR,  
REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS  
EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY  
OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL  
OTHER WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT  
SHALL MOTOROLA BE LIABLE, WHETHER IN CONTRACT OR  
TORT (INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS  
OF THE PURCHASE PRICE OF THE PRODUCT, ACCESSORY  
OR SOFTWARE, OR FOR ANY INDIRECT, INCIDENTAL,  
SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR  
LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS  
OF INFORMATION OR DATA, SOFTWARE OR APPLICATIONS  
OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN  
CONNECTION WITH THE ABILITY OR INABILITY TO USE THE  
PRODUCTS, ACCESSORIES OR SOFTWARE TO THE FULL  
EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW.  
How to Obtain Warranty Service or Other  
Information  
USA  
Phones  
1-800-453-0920  
TTY  
1-877-483-2840  
For Accessories and Software, please call the  
telephone number designated above for the  
product with which they are used  
You will receive instructions on how to ship the Products,  
Accessories or Software, at your expense, to a Motorola  
Authorized Repair Center. To obtain service, you must include:  
178  
Some states and jurisdictions do not allow the limitation  
or exclusion of incidental or consequential damages, or  
limitation on the length of an implied warranty, so the  
above limitations or exclusions may not apply to you. This  
warranty gives you specific legal rights, and you may also  
have other rights that vary from state to state or from one  
jurisdiction to another.  
Laws in the United States and other countries preserve for  
Motorola certain exclusive rights for copyrighted Motorola  
software such as the exclusive rights to reproduce and  
distribute copies of the Motorola software. Motorola software  
may only be copied into, used in, and redistributed with, the  
Products associated with such Motorola software. No other use,  
including without limitation disassembly of such Motorola  
software or exercise of the exclusive rights reserved for  
Motorola, is permitted.  
Service and Repairs  
If you have questions or need assistance, we’re here to help.  
Go to www.motorola.com/support, where you can select from  
a number of customer care options. You can also contact the  
Motorola Customer Support Center at 1-800-453-0920 (United  
States), 1-877-483-2840 (TTY/TDD United States for hearing  
impaired).  
179  
   
Volume 147  
Backlight 74  
C
Index  
A
B
Calendar  
Call Alerts  
Answer 42  
Accessories 21  
Battery 1113  
Charger 21  
Charging 13  
Li-Ion Battery 21  
Activation 2  
Disposal 162  
Installing 12  
Deleting 43  
Queue 43  
Safety 160  
Responding 43  
Sending 42  
Viewing 43  
Airplane Mode 78  
Answering Calls 23  
Applications  
Attachments 58  
Audio Files  
Bluetooth 134139  
Deleting Received Items 139  
Receiving Items 138  
Sending Contacts 137  
Transfers, Canceling 138  
Viewing Received Items 138  
Bookmarks  
Accessing 68  
Creating 68  
Browser  
Call Filtering 82  
Call Forwarding 62, 63  
All Calls 63  
Missed Calls 64  
Off 63  
Call Timers 121  
Call Waiting 61  
Off 61  
Fast Forward and Rewind  
Inserting in Messages 56  
Pause 146  
Playing 146  
Resume 146  
Opening 67  
Restarting 69  
Caller ID 60  
Calls  
Skip 146  
Direct Connect Calls 29  
Direct Talk Calls 44  
180  
 
From Contacts 30  
Group Connect 31  
International 65  
Phone Call While in Direct  
Connect 28  
Contacts 98104  
Adding an Entry 99  
Assign a Picture to an Entry  
Dialing Codes  
Non-Emergency Numbers 65  
Telecommunications Relay  
Service 65  
Digital Rights Management See  
Creating 99  
Phone Calls 23  
Deleting 103  
DRM  
Talkgroup Calls 40  
Using the Member ID 30  
Voice Name 28, 31  
Editing Entries 102  
Making Direct Connect Calls  
Making Phone Calls 28  
Searching 101  
Direct Connect  
One Touch, Setting 79  
Direct Connect Calls  
Dialing 29  
Camcorder  
From Contacts 30  
Member ID 30  
Voice Name 31  
Camera 128130  
Camera Setup 130  
Exposure Control 129  
GPS Tag 129, 130  
Options 129  
Voice Name 100  
D
Datebook  
Direct Connect Number  
Viewing 17, 110  
Direct Connect Numbers 30  
Direct Send 3540  
Contacts 39  
Creating Events 106  
Deleting Events 108  
Editing Events 108  
Making Calls From Datebook  
and Datebook Reminders  
Receiving Reminders 108  
Using Your Phone’s Datebook  
Self Timer 129  
Style 129  
Talking Pictures 128  
White Balance 129  
Zoom 130  
Groups 40  
My Info 38  
Pictures 35  
Receiving Contacts 39  
Carousel 85  
Clock Display 75  
181  
Receiving My Info 39  
Receiving Pictures 36  
Entering Text 1721  
Alpha Mode 19  
Numbers 19  
Creating Groups 32  
Deleting 33  
Groups vs. Talkgroups 40  
Icons 35  
Code 45  
Quick Notes 19  
Making Calls 31  
Private Only 46  
Receiving All Calls On  
Channel 47  
Selecting Mode 17  
Word Text Input 18  
Removing Members 33  
Sending With Direct Send 40  
Settings 89  
F
Setting Up 45  
Fast Forward  
Music 146  
H
I
Display Screen 14  
Downloading Content 69  
DRM 113  
Headset 79  
Hearing Aid Compatibility 163  
G
Games 69  
Deleting Items 143  
Expired Items 114  
Managing Items 113  
Renewing Items 114  
Renewing License 114  
Status Icons 142  
Viewing License Information  
GPS Enabled 114  
Best Results 116  
Emergency Calls 115  
Map Software 117  
Privacy Options 87  
Security 88  
Icons  
Contacts 99  
Groups 35  
Status Information 14  
Images  
Editing 152, 153  
External Display 153  
Menu 152  
Viewing Location 116  
GPS PIN 88  
E
Email 67  
Emergency Numbers 24  
End-of-Call Options 26  
Slideshow 152  
Viewing 152  
In-Call Options 25  
Group Connect  
Adding Group Members 32  
182  
International Numbers 65  
Locking Your Phone 91  
Selecting 16  
Menu Style 75  
Message Center 48  
MMS Messages 51  
Text Messaging (SMS) 60  
Voicemail 50  
Messages  
Notifications 49  
Messaging Settings  
J
M
Java Applications 111112  
Deleting 112  
Making Calls 23  
Media Center 140  
Deleting 142  
Downloading 112  
Downloading Games 69  
Ending Applications 111  
Installing Applications 111  
Memory 114  
Forward Locked 141  
Locking Items 142  
Memory 143  
Pictures 143  
Privacy 89  
Reorder Java Applications  
Renaming Items 142  
Viewing 140  
Memo 119  
Notification 76  
Signature 78  
microSD Card 123127  
Resuming Applications 111  
Running Applications 111  
Suspending Applications 111  
Calling From 119  
Editing 119  
Viewing 119  
Adapter 125  
Folders 126  
Formatting 126  
K
L
Memory  
Inserting 123  
Memory 125  
Removing 124  
Key Functions 6  
Java Applications 114  
Media Center 143  
MMS Messages 77  
Ring Tones 71  
Voice Records 121  
Menu  
Setting Storage Options 126  
Attachments 58  
Calls From 59  
Language 86  
Lock Code  
Changing 92  
Locking Your Keypad 92  
CleanUp 78  
Navigation 16  
183  
Deleting 58  
Embedded Objects 58  
Forwarding 57, 58  
Going to Website 60  
Locking 59  
Memory 77  
Outbox 57  
Quick Notes 55  
Receiving 57  
Sending 51  
Sending 37  
My Music  
O
P
One Touch Direct Connect 79  
Outbox 57  
Owner’s Record 170  
Accessing 144  
Deleting Files 150  
Equalizer 151  
Folders and Lists 145  
Playlists 148  
Pauses 27  
Storing 101  
Phone  
Connecting to Computer 127  
Phone (illus.) 5  
Phone Number  
Finding 27  
Repeat 147  
Visuals 151  
N
Multimedia 140151  
Multimedia Messages  
Music  
Nextel Direct Send  
Nextel Direct Talk  
Saving 26  
With Pauses 27  
Your Numbers 17  
Phone Settings 7091  
Call Answer Mode 85  
Display Settings 7476  
Language 86  
Fast Forward and Rewind  
Pause and Resume 146  
Playing 146  
Nextel Service  
Account Passwords 3  
Activation 2  
Operator Services 4  
Non-Emergency Numbers 65  
Notepad  
Volume 147  
Mute 26  
My Info  
Messaging Settings 7678  
Shortcuts 83  
Sound Settings 7074  
Editing 110  
Receiving 39, 94  
184  
Pictures 143  
Inserting in Messages 55,  
Q
R
S
Quick Notes 55  
Safety Information 156174  
Radio Frequency 166  
Tips 157  
Security 9092  
Shortcuts  
Saving From Messages 60  
Playlist 148  
Radio Frequency 166  
Recent Calls 9396  
Call Alerts 94  
Deleting Recent Calls List 96  
My Info 94  
Prepending a Number 97  
Saving a Number 96  
Remote Direct Connect Button  
Creating 148  
Editing 148  
Favorites 150  
Reordering 149  
Creating 83  
Deleting 84  
Editing 84  
Using 83  
Podcasts 150  
Prepend Dialing 86  
Profiles 79  
Silence All 73  
SIM Card  
Call Filtering 82  
Creating 81  
Deleting 81  
Removing and Inserting 10  
Security 90  
SIM PIN 90  
Resetting Your Phone 86  
Rewind  
Music 146  
Ring Tones  
Editing 81  
Songs  
Switching 80  
Temporary 80  
Viewing 79  
Speakerphone 26  
Speed Dial  
Deleting 71  
Memory 71  
Setting in Contacts 100  
Vibrate 73  
PTT Options 89  
Push To Talk 89  
Assigning Numbers 103  
Making a Call 28  
Ringer Types 70  
185  
T
V
Setting Up 2, 50  
Volume  
Music 147  
Talkgroups 40  
Join 41  
Vibrate All 72  
Video 130  
W
Settings 89  
External Display 154  
TDD/TTY Devices 65  
Telecommunications Relay  
Service 65  
Text Entry 1720  
Database 18  
Waits  
My Videos 153  
Options 131  
Recording 130  
Settings 132  
Storing 101  
Wallpaper 74, 144  
Warranty 175179  
Water Resistance 13  
Web 6769  
Viewing 153  
Voice Name 28, 31  
Mode 17  
Creating 100  
Voice Records  
Creating 120  
Text Messaging  
Three-Way Calling 62  
Transmitters  
Turning On and Off 78  
TTY Devices 65  
Turning Your Phone On and Off  
Bookmarks 68  
Go to Websites 68  
Launching 67  
Reloading a Web Page 68  
Restarting 69  
Deleting 121  
Inserting in Messages 56  
Labelling 120  
Locking 121  
Memory 121  
Wireless Data Services 67  
Downloads 69  
Games, Ringers, & More 69  
Word Text Input 18  
Playing 120  
U
Saving From Messages 60  
Voicemail  
Unlocking Your Keypad 92  
Unlocking Your Phone 92  
Playing Messages 50  
Retrieving 49  
186  

Motorola MOTOROKR Z6 User Manual
Microsoft Computer Accessories 2007 User Manual
Magic Chef MCSCM12TB User Manual
LG Electronics Trax Gray User Manual
Kenwood KDC MP2032 User Manual
Fujitsu MAX3036FC User Manual
Elta 4259 User Manual
Dell PowerVault 110T LTO 2 L User Manual
Crosley Radio Memory Master CR2401A User Manual
Casio LK 205 User Manual