Motorola NNTN7813A User Manual

i410  
User’s Guide  
Class B Digital Device  
DECLARATION OF CONFORMITY  
Per FCC CFR 47 Part 2 Section 2.1077(a)  
As a personal computer peripheral, this device complies with part 15 of  
the FCC Rules. Operation is subject to the following two conditions: (1)  
This device may not cause harmful interference, and (2) this device must  
accept any interference received, including interference that may cause  
undesired operation. See 47 CFR Sec. 15.19(3).  
Note: This equipment has been tested and found to comply with the limits for  
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are  
designed to provide reasonable protection against harmful interference in a  
residential installation. This equipment generates, uses and can radiate radio  
frequency energy and, if not installed and used in accordance with the  
instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular  
installation.  
Responsible Party Name: Motorola, Inc.  
Address: 8000 West Sunrise Boulevard  
Plantation, FL 33322 USA  
Phone Number: 1 (800) 453-0920  
Hereby declares that the product:  
Product Name: i410  
Model Number: H76XAH6JR7BN  
FCC-ID: IHDP56KR2  
Conforms to the following regulations:  
FCC Part 15, subpart B, section 15.107(a), 15.107(d) and section 15.109(a)  
If this equipment does cause harmful interference to radio or television  
reception, which can be determined by turning the equipment off and on,  
the user is encouraged to try to correct the interference by one or more of  
the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from  
that to which the receiver is connected.  
FCC Notice to Users  
The following statement applies to all products that have  
received FCC approval. Applicable products bear the FCC logo,  
and/or an FCC ID in the format FCC-ID: IHDP56KR2 on the product  
label.  
Motorola has not approved any changes or modifications to this device by  
the user. Any changes or modifications could void the user’s authority to  
operate the equipment. See 47 CFR Sec. 15.21.  
Consult the dealer or an experienced radio/TV technician for  
help.  
Industry Canada Notice to Users  
Operation is subject to the following two conditions: (1) This device may  
not cause interference and (2) This device must accept any interference,  
including interference that may cause undesired operation of the device.  
See RSS-GEN 7.1.5.  
Motorola, Inc.  
Consumer Advocacy Office  
600 North US Highway 45  
Libertyville, IL 60048  
Note: Do not ship your phone to the above address. If you need to  
return your phone for repairs, replacement, or warranty service,  
please contact the Motorola Customer Support Center at:  
1-800-453-0920 (United States)  
1-877-483-2840 (TTY/TDD United States for hearing impaired)  
Certain mobile phone features are dependent on the capabilities  
and settings of your service provider’s network. Additionally,  
certain features may not be activated by your service provider,  
and/or the provider's network settings may limit the feature’s  
functionality. Always contact your service provider about feature  
availability and functionality. All features, functionality, and other  
product specifications, as well as the information contained in this  
user's guide are based upon the latest available information and  
are believed to be accurate at the time of printing. Motorola  
reserves the right to change or modify any information or  
specifications without notice or obligation.  
MOTOROLA and the Stylized M Logo are registered in the US  
Patent & Trademark Office. All other product or service names are  
the property of their respective owners. Java and all other  
Java-based marks are trademarks or registered trademarks of Sun  
Microsystems, Inc. in the U.S. and other countries.  
© Motorola, Inc., 2009.  
Manual Number: NNTN7813A  
HELLOMOTO  
Introducing your new Motorola i410 phone. Here’s a quick anatomy lesson.  
Ready  
10:05pm 10/23  
Right Soft Key  
Perform function  
in lower right  
display.  
Left Soft Key  
Perform function  
in lower left  
Speaker  
display.  
On/Off Key  
Smart Key  
Web Key  
OK Key  
Menu Key  
From home screen,  
open main menu.  
Volume Keys  
PTT Button  
End/Power Key  
End calls, exit  
menu system,  
turns phone  
on/off.  
Talk Key  
Make &  
answer calls.  
Micro USB  
4-Way Navigation  
Key  
Audio Jack  
Connector  
Connects charger  
and accessories.  
1
 
check it out  
Ready  
10:05pm 10/23  
Ready  
10:05pm 10/23  
2
Press the Navigation Key  
up, down, left or right  
to highlight a menu feature.  
Customizable r key  
3
4
that can be used  
to open the  
Settings screen  
Press the r key  
to select.  
Press and hold the  
1
@
Power Key  
for a  
few seconds, or until  
the screen lights up,  
to turn on your phone.  
2
 
contents  
check it out . . . . . . . . . . . . 2  
menu map . . . . . . . . . . . . . 5  
use and care . . . . . . . . . . . 7  
essentials . . . . . . . . . . . . . 8  
main attractions . . . . . . 21  
Bluetooth® . . . . . . . . 44  
basics . . . . . . . . . . . . . . . 48  
volume . . . . . . . . . . . . 51  
calls. . . . . . . . . . . . . . . . . 55  
customize. . . . . . . . . . . . . 61  
other features . . . . . . . . . 65  
contents  
3
menu map  
main menu  
0
VoiceRecord  
N
PT Manager  
p
L
Call Alert  
[New VoiceRec]  
Quick PTT  
Java Apps.  
B
j
K
Recent Calls  
Send Message  
Send Picture  
Send Event  
Java System  
Media Center  
u
Settings  
Shortcuts  
Send My Info  
Send Contact  
Configure  
(see next page)  
[New Entry]  
t
Ring To nes  
1)Shortcuts  
2)Cntcs[New Contact]  
3)Recent Calls  
4)Contacts  
Vibrate All: On/Off  
E
Messages  
Ringer  
Vibrate  
Silent  
[Create Message]  
[Create Txt Msg]  
5)Datebook  
[Create MMS Msg]  
6)Messages  
7)VoiceRecord  
8)Net  
Voice Mail  
Inbox  
c
GPS  
Position  
Privacy  
Interface  
Drafts  
9)Call Forward  
Outbox  
Net Alert  
A
Contacts  
P
Call Forward  
Datebook  
Memo  
[New Contact]  
C
Bluetooth  
D
l
1
J
o
M
Profiles  
Hands Free  
Link to Devices  
Device History  
Setup  
Call Timers  
Net  
Last Call  
Find Me  
My Info  
Phone Reset  
Phone Lifetime  
Prvt/Grp Reset  
Prvt/Grp Life  
Circuit Reset  
Circuit Lifetime  
Kbytes Reset  
My Name  
Line 1  
This is the standard Main Menu layout.  
Your phone’s menu may be a little  
different.  
Private ID  
Group ID  
Carrier IP  
IP1 Address  
IP2 Address  
Circuit Data  
menu map  
5
 
settings menu  
Display/Info  
2-Way Radio  
Security  
Wallpaper  
Text Size  
Theme  
Tkgrp Silent  
Phone Lock  
Tkgrp Area  
Keypad Lock  
SIM PIN  
One Touch PTT  
Alert Type  
Home Icons  
Backlight  
Clock  
GPS PIN  
PTT Quick Notes  
On/Off PTT  
Store Rcvd Info  
Change Passwds  
Advanced  
Menu View  
Large Dialing  
Language  
Alert Timeout  
Personalize  
Headset/Spkr  
Connectivity  
Reset Defaults  
Return to Home  
Transmitters  
Baud Rate  
Menu Options  
Phone Calls  
Up Key  
Set Line  
Down Key  
Left Key  
Right Key  
Center Key  
Left Sftkey  
Right Sftkey  
Power Up  
Any Key Ans  
Auto Redial  
Call Waiting  
Auto Ans  
Flip Activation  
Minute Beep  
Call Duration  
TTY  
Hearing Aid  
Notifications  
DTMF Dialing  
Prepend  
Volume  
Line 1  
Messages  
Earpiece  
Speaker  
Keypad  
Java Earpiece  
Java Spkr  
Data  
menu map  
6
use and care  
Use and Care  
To care for your Motorola phone, please keep it away from:  
liquids of any kind  
dust and dirt  
Don’t expose your phone to water, rain,  
extreme humidity, sweat, or other  
moisture. If it does get wet, don’t try to  
accelerate drying with the use of an  
oven or dryer, as this may damage the  
phone.  
Don’t expose your phone to dust, dirt,  
sand, food, or other inappropriate  
materials.  
extreme heat or cold  
cleaning solutions  
To clean your phone, use only a dry soft  
cloth. Don’t use alcohol or other  
cleaning solutions.  
Avoid temperatures below 0°C/32°F or  
above 45°C/113°F  
.
microwaves  
the ground  
Don’t try to dry your phone in a  
microwave oven.  
Don’t drop your phone.  
7
 
essentials  
Caution: Before using the phone for the first  
time, read the Important Safety and Legal  
information included in the gray edged pages  
at the back of this guide.  
3
Press the  
r
to select it.  
symbols  
This means a feature is network/  
subscription dependent and may  
not be available in all areas. Contact  
your service provider for more  
information.  
about this guide  
This guide shows how to locate a menu  
feature as follows:  
This means a feature requires an  
optional accessory.  
Find it:  
/
>
Settings  
This means that, from the home screen:  
1
2
Press the menu button  
/
to open the  
Main Menu  
.
Press the navigation key to scroll to  
Settings  
.
essentials  
8
         
Warning: To avoid loss or damage, do not  
remove your SIM card from your phone  
unless absolutely necessary.  
SIM card  
insert the SIM card  
Turn off your phone and remove your battery  
before you install or remove a SIM card.  
battery  
Carefully slide the SIM card into your phone,  
until it lies flat in the SIM card slot.  
battery installation  
1
Open the micro-USB and headphone  
jack connector covers. Slide the battery  
door down until it is released.  
essentials  
9
       
battery charging  
New batteries are not fully charged.  
2
3
Remove battery door.  
Insert battery as shown below. Push the  
battery down until it snaps in place.  
charge using the charger  
1
Pull out the connector cover, and insert  
the charger into the accessory connector  
on your phone as shown.  
4
Replace the battery door.  
2
Plug the other end of the charger into the  
appropriate electrical outlet.  
When you charge the battery, the battery level  
indicator at the upper right of the screen  
shows charging progress. At least one  
essentials  
10  
 
segment of the indicator must be visible to  
ensure full phone functionality while charging.  
power up in charging mode. This mode allows  
the phone to charge fastest and quickest.  
Note: If the battery is very low, the phone will  
not turn On, but it will continue to charge at a  
low rate. The phone will power up in charging  
mode when the battery has been charged to  
approximately 5% of its capacity. For faster  
charging under a very low battery condition, it  
is recommended to use the rapid charger  
supplied with the handset.  
charge from your computer  
You can partially charge your phone’s  
battery by connecting a Motorola-approved  
USB cable from your phone’s micro-USB port  
to a high power USB connector on a  
computer (not a low-power one, such as the  
USB connector on your keyboard or  
bus-powered USB hub). Typically, USB  
high-power connectors are located directly on  
your computer.  
If the phone is turned on while charging from  
a computer, it will not fully charge the battery.  
In this case, the battery charge will be  
Note: The phone will be charged at a slower  
rate than it is charged with the rapid charger.  
maintained approximately between 80% and  
95% of the battery's capacity. Cables and  
software drivers are available in Motorola  
Your computer must be turned on, and you  
must have correct software drivers installed  
on your computer. If the Phone is off when  
the USB cable is connected between the  
computer and the phone, the phone will  
TM  
Original data kits, sold separately.  
Tip: Motorola batteries have circuitry that  
protects the battery from damage from  
overcharging. Of course, unplugging the  
essentials  
11  
charger from the wall will prevent the battery  
from overcharging.  
turn it on & off  
To turn on your  
battery indicators  
phone, press and  
d
e
f
g
The battery is at approximately 100%  
to 90% capacity when the indicator is  
blue and displaying three bars.  
The battery is at approximately 65%  
capacity when the indicator is green  
and displaying two bars.  
The battery is at approximately 10%  
capacity when the indicator is yellow  
and displaying one bar.  
The battery is at approximately 5%  
capacity when the indicator is red  
and has a flashing red bar.  
hold  
@
for a few  
seconds or until the  
display turns on.  
To turn off your phone, press and hold  
two seconds.  
@
for  
Note: If you press  
seconds, the handset will power “On” on  
Transmitter Off” mode. See “transmitters”  
@
for more than four  
enable security  
You must enable security the first time you  
power on you phone or within 10 days of first  
activation.  
h
The battery is charging.  
1
Press  
-
under Ok.  
essentials  
12  
         
2
3
You are prompted to enable security.  
Press under Yes. A series of screens  
followed by the default home page  
displays.  
1
2
If you want to answer the call on the  
handsfree speaker phone, press the  
-
speaker key  
s
with the flip closed. To  
hang up press the smart key  
(
.
Press  
@
to return to the home screen.  
If you want to answer the call using the  
handset, just open the flip and press  
To hang up press or close the flip.  
`
.
@
make a phone call  
Enter a phone number and press  
a call or use a voice name. See “voice  
Note: You must have the Flip Activation feature  
`
to make  
make a private call  
Note: For best call quality avoid covering the  
antenna with your hand.  
With Private calls service, you use your phone  
as a long-range, digital 2-way radio using one-  
to-one Private calls.  
To hang up press  
@.  
Your Private ID is the number at which you  
receive one-to-one Private calls.  
answer a phone call  
When your phone rings and/or vibrates, you  
have the following options to answer:  
Note: PTT means Push to Talk / Walkie-Talkie.  
essentials  
13  
                 
To make a private call  
2
3
Press and hold the PTT button and begin  
talking after your phone emits a chirping  
sound.  
1
Enter the Private ID you want to call.  
2
Press and hold the PTT button. Begin  
talking after your phone emits a chirping  
sound.  
Release the PTT button to listen.  
To end the call press  
-
under Exit.  
3
Release the PTT button to listen.  
store a phone number  
or private ID  
To end the call press  
@.  
Note: A Private call ends automatically if there  
is no activity on the call for a few seconds.  
You can store a phone number or Private ID in  
Tip: To let someone know you want to talk to  
them on a Private call, press  
Contacts  
:
-
under Alert.  
1
2
Press  
/
>
Contacts [New Contact].  
>
Enter a name for the new entry Each  
.
entrys name can contain up to 20  
characters.  
answer a private call  
1
When your phone emits a chirping sound  
or vibrates to indicate you are receiving a  
Private call, wait for the caller to finish  
speaking.  
3
Select Ringer if you wish to assign a  
specific ring tone to that phone number.  
essentials  
14  
     
4
Select a type for the entry (Mobile  
IP or Other).  
To store a Private ID, choose Private  
,
Private  
,
Find it:  
/
>
Contacts  
Work1 Work2, Home, Email, Fax, Pager,  
,
1
Scroll to the Contacts entry.  
.
Tip: By pressing the first letter of the  
name of the Contacts you want, you will be  
taken to all the contact names starting  
with the letter you pressed.  
5
Enter the number for the entry and press  
under Done to save the entry.  
-
Tip: Before saving the entry, you can save  
more information. You can store E-mail  
addresses, or IP addresses. You can assign  
each number a speed dial number and voice  
name.  
2
3
If the Contacts entry contains more than  
one number, scroll left or right until the  
type of the number you want to call is  
displayed (Mobile Private, Work1, Work2, Home,  
,
After you have saved the number, the new  
Contacts entry is displayed.  
etc.).  
If you choose a phone number, press  
to call the entry.  
`
call a stored phone  
number or private ID  
Shortcut: From the home screen press  
under Contcs  
or  
If you choose a Private ID press and hold  
the PTT button to call the number.  
-
Tip: If the Contacts entry you scrolled to  
contains a Private ID, you can make an instant  
Private call to that Private ID by pressing and  
or  
essentials  
15  
 
holding the PTT button, even if the Private ID  
is not the type of number displayed.  
Note: The messaging menus may look  
slightly different, depending on the  
messaging setup of your phone.  
your phone number and  
Private ID  
set it up  
Before you begin using text messaging, you  
may need to set up your signature, service  
center number, and expiration information.  
Find it:  
Tip: Want to see your phone number or  
Private ID while you’re on a call? Press  
/
>
My Info  
Shortcut: From the home screen press  
-
/
>
under Msgs  
>
/
>
Text Msg Setup.  
My Info  
.
or  
text messages  
Find it:  
/
>
Messages  
>
/
>
Text Msg Setup  
The following options become available:  
If your service provider offers text messaging,  
your phone sends text messages using  
Mobile Originated Short Messaging Services  
(MOSMS) and receives text messages from  
other phones that are using MOSMS.  
option  
Signature: Enter your signature (up to 11  
characters long).  
Delivery Rpt: Set this option to On if you want  
your phone to show you when the  
message has been delivered.  
essentials  
16  
         
Press  
you entered.  
-
under Done to save the information  
option  
Srvc Cntr No: Enter the phone number of your  
service center. If you do not know this  
number, contact your service provider.  
receive a text message  
1
To view the message press  
To dismiss the message notification press  
under Exit  
-
under Read.  
Expire After: This is the amount of time  
messages you send are saved at the  
service center if they cannot be delivered.  
After this period, they are discarded.  
2
-
.
Note: If your phone is powered off when you  
receive a text message, your phone notifies  
you the next time you power it on. If you are  
out of your coverage area, your phone alerts  
you when you return to your coverage area.  
Scroll to select the number of days you  
want your messages to be saved.  
Cleanup: Controls how long messages remain  
in the Inbox and Outbox before they are  
Tip: While reading a text and numeric  
message that contains a phone number, you  
Quick Notes: Quick notes are short, pre-written  
text messages that you can create, edit,  
and send in your text messages. You can  
store up to 20 quick notes. A quick note  
may be up to 30 characters long.  
can press  
`
to call that number.  
read from the message center  
1
From the home screen press  
-
under  
Msgs  
>
Inbox  
>
Text Inbox.  
You can create a [New Note] or press  
-
under  
Edit to change the pre-written quick notes.  
essentials  
17  
     
2
3
Select the message you want to read or  
press the number of the message you  
want to read. If the message fills more  
than one screen, scroll to read it.  
you want to send the message to and  
press  
r.  
or  
Press  
-
under Browse, and select Recent  
Tip: Scrolling through one message lets  
you view the next message.  
Calls Contacts or Memo to find the number you  
,
want.  
To reply to the message, press  
-
under  
3
Select Msg and enter the text of the  
message or to use a quick note press  
under Browse and scroll to the quick note  
you want.  
Reply or to see all other choices, including  
forwarding and deleting the message,  
calling the sender, or storing the sender’s  
-
number in Contacts, press  
/.  
4
Press  
/
>
Set Send Method and select Text  
,
Fax  
,
x400  
,
Paging Email ERMES, or Voice  
,
,
.
create and send text messages  
5
If you want to send the message, press  
under Send or to delete the message  
without sending it, press under Cancel  
1
From the home screen press  
-
under  
.
-
Msgs  
>
[Create Message]  
>
[Create Txt Msg]  
-
.
or  
Note: If you want to request confirmation  
of delivery press  
Select Inbox  
>
Text Inbox, or Outbox  
>
Text Outbox,  
/
>
Delivery Report  
>
On.  
or Drafts Text Draft  
>
.
2
To address the message use the keypad  
to enter the phone number of the person  
essentials  
18  
   
use drafts  
delete sent text messages  
When you save a message as a draft, it is  
saved in the drafts folder.  
Shortcut: From the home screen press  
-
under Msgs  
>
Outbox  
>
Text Outbox.  
Shortcut: From the home screen press  
under Msgs  
-
1
2
3
Scroll to the message you want to delete.  
>
Drafts  
>
Text Draft.  
Press  
Press  
-
-
under Delete  
.
1
Select the draft you want to edit. You also  
have the choice to create new text  
messages from this menu.  
under Yes to confirm.  
delete all unlocked sent messages  
Shortcut: From the home screen press  
-
2
To edit the fields you want to change,  
follow step 2 through step 5 in “create  
and send text messages” above.  
under Msgs  
>
Outbox  
>
Text Outbox  
.
1
2
Press  
Press  
/
>
Delete All  
.
-
under Yes to confirm.  
resend text messages  
Shortcut: From the home screen press  
-
go to a website  
If a message contains one or more website  
URLs, you can go to that website. See “go to  
under Msgs  
>
Outbox  
>
Text Outbox.  
1
2
Scroll to the message you want to resend  
or press the number of the message you  
want to resend.  
Press  
-
under Resend.  
essentials  
19  
       
Shortcut: From the home screen press  
-
manage memory  
Your text inbox, outbox, and drafts folder have  
a set amount of memory available for storing  
messages.  
under Msgs Text Msg Setup Mem Mtr-Other.  
>
/
>
>
The text inbox holds 20 messages. If the text  
inbox is full, you cannot receive messages  
until you delete some.  
The outbox and drafts folder share memory  
space. Together they can hold 30 messages.  
If the outbox and drafts folder memory is full,  
you cannot send messages or save drafts  
until you delete some.  
To view the amount of memory available in  
your text inbox:  
Shortcut: From the home screen press  
-
under Msgs Text Msg Setup Mem Mtr-Inbox.  
>
/
>
>
To view the amount of memory available in  
your outbox and drafts folder:  
essentials  
20  
   
main attractions  
Items in the media center can be sent in  
MMS messages. See “MMS” on page 29.  
media center  
The media center lets you access pictures and  
audio recordings stored in your phone’s  
memory.  
Pictures in the media center can be sent in  
Private calls using Send via PTT.  
Audio files supported by the Media Center  
include:  
The following audio recordings can be  
accessed through the media center:  
Format  
.au  
Sampling Rates/Bit Rates  
8 KHz/8 kbps  
Voice records  
Musical ring tones in the list of ring  
tones  
8 KHz, Type 0  
.midi  
.mp3  
.wav  
8 KHz/8 kbps  
8 KHz/64 kbps  
Audio recordings saved from MMS  
messages received  
Audio recordings downloaded to your  
phone  
Note: Stereo audio files are not supported by  
the Media Center.  
main attractions  
21  
       
Image files supported by the Media Center  
include:  
Contact information  
You can choose to send My Info and contact  
information to any Private ID.  
Format  
.png  
Max. Image Size (in pixels)  
640 x 480  
You can choose to send pictures, messages,  
events to the Private ID you are engaged in a  
a Private call with, Private IDs on the Recent Calls  
640 x 480  
.gif  
640 x 480  
.jpg  
list, and Private IDs stored in Contacts  
.
127 x 127  
.wbmp  
When you make or receive a Private call, your  
phone automatically determines whether the  
phone you are engaged in a Private call with is  
able to receive each of these items. Your  
phone saves this information for as long as  
the Private ID is on your Recent Calls list or is  
saved in your Contacts. Your phone updates the  
saved information each time you make or  
receive a call to or from that Private ID.  
PTX features  
With Push To View features, your phone  
can send and receive the following  
items through Private calls with other phones  
that have this capability:  
Short text messages  
Pictures  
You can turn your phone’s ability to send and  
receive messages, pictures, events on and  
off.  
Datebook events  
My Info  
main attractions  
22  
   
begin a message from the Contact or  
the Recent Calls list  
send messages  
The Push to Send Messages feature  
lets you send short text messages  
through Private calls.  
1
From the Contacts or the Recent Calls list,  
select the entry containing the Private ID  
you want to send the message to.  
When you send a message, it appears on the  
display of the phone you are engaged in the  
Private call with. The message won’t be  
stored in the recent calls list.  
2
Press  
/
>
Use PTT Feature  
>
Send Message.  
begin a message from the PT Manager  
The PT Manager lets you select the Private ID  
you want to send the message to from Contacts  
or the Recent Calls list.  
begin a message and choose a  
recipient  
You can begin a message during a Private call,  
Find it:  
/
>
PT Manager  
>
Send Message  
Then select A Contact or A Recent Call to see a list  
of entries from the Contacts or the Recent Calls list  
that can receive messages.  
from the Contacts list, the Recent Calls list, or from  
the PT Manager  
begin a message during a Private call:  
While in a Private call, press  
.
create messages  
After you have begun a message and chosen  
a recipient, a screen appears that lets you  
create the text of the message you want to  
/
>
Use PTT Feature  
>
Send Message.  
main attractions  
23  
send. Your message may be up to 400  
characters long.  
reply to a message  
1
2
3
View the message.  
Press under Reply  
You can choose from a list of ready-made  
words or short phrases called Quick Notes.  
You can use a Quick Note as it is or edit it  
before you send it. Editing a Quick Note  
changes the Quick Note for this message only  
and will not change the Quick Note on the list.  
-
.
Create the message and press the PTT  
button to send it.  
send pictures  
You can send pictures stored in Media  
Center through Private calls. The picture you  
send appears on the Private call recipient’s  
display.  
send a completed message  
After you have completed your message,  
press the PTT button to send it.  
If the recipient accepts the picture, their  
phone saves the picture.  
receive messages  
The first time you send a stored picture after  
turning the phone on, Picture Fees May Apply.  
Continue? appears and you are prompted to  
respond.  
When you receive a message, a message  
notification appears on the display. To view  
the message press  
r.  
To dismiss the message press  
-
under  
Note: You cannot make or receive Private  
calls while transmitting or receiving a picture.  
Dismiss  
.
main attractions  
24  
 
2
3
Press  
/
>
Send Via...  
>
Send via PTT  
.
send a picture during a call  
A list of contacts that have Private IDs and  
are able to receive pictures appears.  
1
While in a Private call, press  
Picture or press  
Send Picture  
-
under  
>
/
>
Use PTT Feature  
.
Select the name of the person you want  
to send the picture to.  
A list of pictures that can be included in a  
Private call appears.  
4
Press the PTT button to send the picture.  
2
3
4
Select the picture you want to send.  
5
When prompted, press the PTT button to  
resume the Private call.  
Press the PTT button to send the picture.  
Wait while the picture is transmitted. The  
Private call is temporarily interrupted  
while a picture is transmitted.  
from the PT Manager:  
Find it: PT Manager Send Picture  
/
>
>
1
Select A Contact, or A Recent Call to see a list of  
entries that can receive pictures.  
5
When prompted, press the PTT button to  
resume the Private call.  
2
Select the entry containing the Private ID  
you want to send the message to.  
start a call by sending a picture  
3
Select the picture you want to send.  
from Media Center  
Find it:  
4
Press the PTT button to send the picture.  
/
>
Media Center  
1
Select the picture you want to send.  
main attractions  
25  
5
Once picture has been sent, when  
prompted press the PTT button to resume  
the call.  
prompted to respond. Press  
accept the picture.  
-
under Yes to  
clear a picture from the display  
receive a picture  
If you want to clear a picture from your  
phone’s display while still on a call, press  
When someone sends you a picture, your  
phone emits a tone or vibrates and a message  
appears asking if you want to accept the  
picture.  
/
>
Clear Screen.  
The picture will not appear on the display  
again the next time you receive a call from  
person who sent it. This does not delete the  
Pictures you receive are saved to your phone’s  
memory. They are accessible through Media  
picture from Media Center.  
Center  
.
send My Info  
When you see a message asking if you want  
to accept the picture, press Yes to accept or No  
to decline.  
1
2
While in a Private Call press  
Send via PTT, and push the PTT button to  
send.  
/
>
Tip: If you want to stop the transmission  
before it is finished, press  
@.  
or  
Note: The first time you accept a stored  
picture after turning the phone on, Picture Fees  
May Apply. Continue? appears and you are  
From the home screen press  
Send via PTT and push the PTT  
button to send.  
/
>
My Info  
>
/
>
main attractions  
26  
 
1
Select On or Off.  
set my info sending option  
When you make a call in which your  
You can control what portion of the  
information in My Info is sent and  
whether it is sent automatically in every call or  
only when you choose to send it.  
information is sent automatically, the name  
you entered in the My Name field of My Info  
appears on the display of the recipient’s  
phone, even if your name and Private ID are  
not stored in the recipient’s Contacts.  
Find it:  
Info to Send  
/
>
PT Manager  
>
Configure  
>
PTT My Info  
>
1
Select or remove the fields you want to  
send.  
send contact information  
1
2
3
While in a Private Call press  
/
>
2
Press  
-
under Done.  
Use PTT Feature  
.
The information your phone sends always  
includes My Name and Private. You may also send  
Line 1 Carrier IP, and Circuit Data depending on your  
Select Send Contact and select the contact  
information you want to send.  
,
Push the PTT button to send.  
or  
sending options.  
automatic sending  
To control whether you send your information  
automatically:  
1
From the home screen press  
/
>
PT Manager  
>
Send Contact.  
Find it:  
/
>
PT Manager  
>
Configure  
>
PTT My Info  
>
Auto Send  
main attractions  
27  
 
2
Enter the Private ID number of the person  
you want to send the Contact information  
one touch PTT  
Find it:  
/
>
PT Manager  
>
Configure  
>
One Touch PTT  
to or press  
-
under Browse  
.
One Touch PTT sets your phone to do any of the  
following each time you press the PTT button  
from the home screen:  
3
Select from Recent Calls  
,
Contacts, or Memo.  
4
Select the contact information you want  
to send and push the PTT button.  
option  
turn PTT features on and off  
Off: Nothing happens when you press the  
PTT button from the home screen.  
You can turn your phone’s ability to send and  
receive messages, pictures, and Datebook  
events on and off.  
Last Call: Call the most recent Private ID or  
Group on the recent calls list.  
You cannot turn your phone’s ability to send  
and receive My Info and contact information  
on and off.  
Assigned No.: Call a Private ID you assign.  
Enter the number using your keypad, or  
press  
Calls, or Memo  
-
under Search. Select Contacts, Recent  
.
Find it:  
/
>
PT Manager  
Select On/Off PTT  
Check or uncheck Messages  
Events  
>
Configure  
PT Manager: Go to PT Manager. See “PT  
1
2
.
,
Pictures and/or  
Send Message: Go to the first screen to send a  
message.  
.
main attractions  
28  
   
or  
option  
2
3
Select Send Message Send Picture, Send Event, Send  
My Info, or Send Contact. After choosing what  
PTT item you are sending, select a  
,
Send Picture: Go to the first screen to send  
Send Event: Go the first screen to send a  
Datebook event.  
contact and press the PTT button to send.  
or  
Send My Info: Go to the first screen to send My  
Select Configure to configure your PTT Quick  
Notes  
,
PTT My Info  
,
One Touch PTT, or On/Off PTT  
.
Send Contact: Go to the first screen to send a  
MMS  
Multi-Media Messaging Service (MMS) lets  
you send and receive messages that may  
include text, pictures and audio recordings.  
PT manager  
The PT Manager lets you quickly access PTT  
features, and other Private call features, from  
the main menu.  
create a message  
Shortcut: From the home screen press  
-
Find it:  
/
>
PT Manager  
under Msgs  
>
[Create Message]  
>
[Creat MMS Msg].  
1
Select Quick PTT to quickly find a contact  
that has a Private ID.  
or  
main attractions  
29  
       
Find it:  
[Creat MMS Msg]  
/
>
Messages  
>
[Create Message]  
>
more message options  
To view more message fields in a message  
1
Select To and add the phone number or  
email address or select from Contacts or  
you are creating, select .....MORE..... or press  
-
under More  
.
Recent Calls and press  
-
under Back.  
option  
Tip: To remove a phone number or email  
address from the list of message recipients,  
scroll to the phone number or email address  
and press  
When you are finished addressing the  
message, press under Back  
To enter or edit the body of the message:  
Subject: Create or edit the subject line.  
Attach: Attach a picture, audio file or voice  
record.  
-
under Remove.  
Cc: Send a copy of this message to  
someone else.  
-
.
Auto Replies: Allows you to create a list of  
possible short answers for the recipient to  
choose when replying to your message.  
2
Select Mesg and enter text or press  
under QNotes to select a pre-written quick  
-
Priority: Set priority Normal or High  
Report: Set receipt confirmation On Delivery  
Valid Until: Set a date after which attempts to  
deliver the message end, or press under  
.
note.  
.
3
Press  
-
under Back and  
-
under Send.  
-
No Date  
.
main attractions  
30  
reply to a message  
quick notes  
You can reply to a message while you are  
viewing it, or while a previously viewed  
message is highlighted in the message  
center. You cannot reply to unread messages.  
When you are filling in the Message and Subject  
message fields, you can add ready-made  
words or short phrases called Quick Notes.  
After you add these words or phrases, you  
can edit them as you would any other text.  
To reply to a message:  
1
While you are creating a message, scroll  
to or select Message or Subject  
1
2
View the message you want to reply to.  
To reply to the sender only, press  
under Reply or if you wish to include all the  
people copied in the message, press  
under Reply All  
.
-
2
Press under QNotes.  
-
-
Select the Quick Note you want to insert  
into the message.  
.
A list of short phrases appears. Select any  
of these phrases to add it to your  
3
Press  
-
under Send.  
attach a picture, audio and  
voice recording  
You can attach one or more pictures, audio or  
voice recordings from your phone into the  
body of the message. You can include text in  
messages or select [Create Reply]  
.
3
Edit any message fields you want to  
change.  
4
Press  
-
under Send.  
main attractions  
31  
the body of your message in addition to these  
items.  
create a new voice record  
You can create a new voice record to send  
with a message:  
While you are filling in the Attach field, press  
[New]  
>
Browse Pictures or Browse Audio.  
1
2
3
Press  
/
or press  
-
under Attach  
>
[New].  
A list of available pictures, audio and voice  
recordings appears.  
Select Record Voice  
.
Say the message you want to record into  
the microphone.  
Select the picture, audio or voice record you  
want to attach.  
4
When you are finished recording,  
Tip: To view or listen to the item before  
press  
r.  
attaching it, highlight it and press Preview  
.
5
When you are finished, press  
-
under  
Note: You can only attach audio files and  
pictures if they are not forward locked and if  
their DRM settings do not prevent you from  
sending.  
Done  
.
The voice record is attached to the message  
and saved to the list of voice records.  
Forward locked items are usually copyright  
protected, and you cannot share them with  
anyone, such as in Private calls or by  
uploading them from your phone.  
remove an attachment  
To remove an attachment in a message you  
are creating:  
1
Select Attach.  
main attractions  
32  
2
3
Scroll to the attachment you want to  
remove.  
send a draft  
Shortcut: From the home screen press  
-
-
Press  
/
>
Unattach.  
under Msgs  
>
Drafts  
>
MMS Drafts.  
1
2
Select the draft you want to send.  
Press under Send  
drafts  
-
.
While you are creating a message, you can  
save it in the MMS drafts folder before you  
send it.  
edit a draft  
Shortcut: From the home screen press  
under Msgs  
You can view, edit, send, or delete saved  
drafts.  
>
Drafts  
>
MMS Drafts.  
Select the draft you want to edit and press  
r
.
save a message in the MMS  
drafts folder  
From the Message center press  
delete a draft  
When you send a draft, it is removed from the  
MMS drafts folder.  
/
>
Save.  
You can continue to create the message. The  
version you saved in the MMS drafts folder  
will not change.  
To delete a message in the MMS drafts folder  
without sending it, scroll to the message you  
want to delete and press  
under Yes  
-
under Delete and  
-
.
main attractions  
33  
2
Press Resend.  
MMS outbox  
Note: If your message was sent successfully,  
Resend will not appear as an option.  
MMS messages you have sent or tried to  
send are stored in the MMS Outbox.  
check delivery status  
forward items from the outbox  
If a message was successfully sent and you  
set the message to give a report confirming  
delivery, you can check the delivery status:  
Shortcut: From the home screen press  
under Msgs  
-
>
Outbox  
>
MMS Outbox.  
1
Scroll to the message you want to  
forward.  
Shortcut: From the home screen press  
under Msgs  
-
>
Outbox  
>
MMS Outbox.  
2
3
Press  
/
>
Forward.  
1
2
Scroll to the message you want to view.  
Press  
Edit and send your message.  
/
>
Delivery Status.  
resend  
delete a message  
If a message was not sent from your handset,  
you can resend it.  
1
Scroll to the message you want to delete.  
2
Press  
or  
- under Delete.  
Shortcut: From the home screen press  
under Msgs  
-
>
Outbox  
>
MMS Outbox.  
1
Scroll to the message you want to resend.  
3
Press  
/
>
Delete Multiple.  
main attractions  
34  
4
Select the message or messages you  
want to delete.  
If you dismiss the notification, the message is  
not deleted. It can be accessed through the  
message center.  
5
Press  
-
under Delete to confirm.  
If you are not on a phone call when you  
receive a message, your phone sounds a  
notification tone every 30 seconds until you  
access the message or dismiss the alert.  
receive a message  
When you receive an MMS message, a  
message notification appears on the display.  
If you are on a call when you receive a  
message, your phone may sound a  
notification tone during the call or after you  
end the call, depending on how you set your  
notification options.  
1
2
To view the message press  
r.  
If the message fills more than one screen,  
use the navigation key to scroll down and  
read the remaining text.  
message notifications  
set notification options  
When you receive a message, your phone  
notifies you with text on the display, a  
notification tone or vibration.  
To control whether your phone sounds  
message notification tones while you are on a  
phone call:  
You can access the message or dismiss the  
notification.  
Find it:  
/
>
Settings  
>
Phone Calls> Notifications.  
main attractions  
35  
Select from the following options:  
If a message contains pictures or audio  
recordings in the body of the message,  
highlight each picture or audio recording to  
view or play it.  
option  
Receive All: Tones sound during calls for all  
types of messages.  
If a message contains a picture or audio  
recording as an attachment, open the  
attachment to view the picture or play the  
audio recording.  
Msg Mail Only: Tones sound during calls for  
mail messages; tones for all other types of  
messages are held until you end calls.  
Delay All: Tones for all types of messages are  
held until you end calls.  
open attachments  
Note: Delay All is the default setting.  
1
View the message.  
2
Highlight the attachment you want to  
Tip: To set notification options during a call  
open and press  
r. Attachments appear  
press  
/
>
Call Setup  
>
Notifications.  
at the end of a message.  
Note: Attachments that are of an unknown  
type cannot be opened, but they can be  
deleted.  
embedded objects and  
attachments  
Messages may contain pictures or audio  
recordings as part of the body of the message  
or as attachments.  
main attractions  
36  
2
Create and send your message.  
Embedded objects and attachments are  
included when you forward a message.  
view received messages from  
the message center  
Shortcut: From the home screen press  
under Msgs  
-
>
Inbox  
>
MMS Inbox.  
lock and unlock messages  
use auto replies  
Locked messages cannot be deleted until you  
unlock them.  
If the message you are replying to was sent  
with auto replies, it contains a numbered list  
of possible replies for you to send. Press the  
number of the reply you want to send. The  
reply is sent immediately without further  
action.  
1
View the message you want to lock or  
unlock.  
2
Press  
Unlock Message  
/
>
Lock Message or  
.
/
>
call a number in a message  
delete unread messages  
If a message you receive contains a phone  
number or Private number in the From field,  
the To field, the Cc field, the subject line, or  
the body of the message, you can call or send  
a call alert to that number.  
1
2
3
Scroll to the message you want to delete.  
Press  
Press  
-
-
under Delete  
.
under Yes to confirm.  
forward a message  
1
Press  
/
>
Forward.  
main attractions  
37  
 
4
To store the number or email address as a  
new entry, select [New Contact]  
send a call alert  
.
1
View the message.  
To store the number or email address to  
an existing entry, select the entry.  
2
Highlight the Private number you want to  
alert.  
5
6
With the Contacts type field highlighted,  
scroll left or right to display the Contacts  
type you want to assign the number or  
email address.  
3
Press  
/
>
Alert.  
4
Push the PTT button.  
store message information to  
contacts  
Press  
-
under Done.  
go to a website  
If a message contains one or more website  
URLs, you can go to that website.  
If a message you receive contains a phone  
number, Private number, or an email address  
in the From field, the To field, the Cc field, the  
subject line, or the body of the message, you  
can store this information to Contacts.  
1
2
View the message.  
Highlight the website URL you want to go  
to.  
1
2
View the message.  
Highlight the number or email address  
you want to save.  
3
Press  
/
>
Go To Website.  
Note: The entire URL must appear in the  
message to allow you to open the website.  
3
Press  
/
>
Save Number or  
/
>
Save Email.  
main attractions  
38  
 
1
2
View the message.  
save an embedded picture or  
audio recording  
To save a picture or audio recording that is  
part of the body of a message you receive:  
Highlight the picture or audio recording  
you want to delete.  
3
Press  
/
>
Delete Picture or  
/
>
Delete Audio  
.
1
2
View the message.  
save attachments  
Highlight the picture or audio recording  
you want to save.  
1
View the message.  
2
Highlight the attachment you want to  
save.  
3
Press  
/
>
Save Picture or  
/
>
Save Audio.  
The item will save in the default storage  
location.  
3
Press  
/
>
Save Attachment.  
Selected items save to the default storage  
location.  
Note: Some types of pictures and audio  
recordings can be viewed or played, but not  
saved.  
Note: Some types of pictures and audio  
recordings can be viewed or played, but not  
saved. You may save pictures and audio  
recordings from slide shows individually as  
you view or listen to them.  
delete an embedded picture or  
audio recording  
To delete a picture or audio recording that is  
part of the body of a message you receive:  
main attractions  
39  
With the flip closed, press the smart key on  
save a picture  
the top  
(. Opening or closing the flip does  
1
View the slide show.  
not interrupt message transmission.  
2
When the picture you want to save  
appears, press  
/
>
Save Picture.  
customize MMS  
Find it:  
/
>
Messages  
>
/
>
MMS Setup  
save audio  
This option is available from many context-  
sensitive menus when you are using MMS.  
1
2
3
View the slide show.  
Press Save Audio.  
/
>
The MMS Setup menu lets you customize  
MMS for your handset with the following  
options:  
If the slide show contains more than one  
audio recording, a list of the audio  
recordings appears. Select the audio  
recording you want to save.  
option  
Friendly Name: Enter text here to create a  
friendly name. Your friendly name is the  
name displayed in the From field on other  
iDEN handsets when they receive  
messages from you.  
message transmission  
After you start to send a message you have  
created or start to download a message you  
have been sent, you can still stop the  
message transmission from being completed.  
main attractions  
40  
option  
option  
Signature: Enter text here to create a  
signature. Your signature is text that is  
automatically inserted at the end of all  
messages you create. You can edit the text  
before sending the message.  
Downloads: Controls whether your phone  
automatically downloads new messages  
when they arrive, or only after you respond  
to a prompt or read the message from the  
Inbox. Set this option to Automatic if you want  
your phone to download new messages  
automatically; set the option to Manual if you  
want your phone to prompt you before  
downloading new messages.  
Quick Notes: Lets you create new Quick Notes  
and edit or delete Quick Notes you have  
created.  
Replies: Lets you create new reply phrases  
and edit or delete reply phrases you have  
created.  
Memory Size: Shows the total amount of Used  
Free, and total Capacity of the phone’s  
memory.  
,
Cleanup: Controls how long messages remain  
in the Inbox and Outbox before they are  
deleted.  
new quick notes and reply  
phrases  
create quick notes  
1
From the MMS Setup menu, select Quick  
Notes or Replies  
.
main attractions  
41  
2
3
Select [New Quicknote] or [New Reply]  
.
4
Press  
-
under Yes to confirm.  
Enter text from the keypad.  
cleanup  
edit quick notes  
You can edit only Quick Notes and reply  
phrases you have created.  
The Cleanup option controls how long  
messages remain in the MMS Inbox and MMS  
Outbox before they are deleted. You set the  
cleanup option for the Inbox and Outbox  
separately.  
1
2
3
From the MMS Setup menu, select Quick  
Notes or Replies  
.
The cleanup option only deletes unlocked read  
messages from the Inbox, and sent  
messages from the Outbox for MMS.  
Select the Quick Note or reply phrase you  
want to edit.  
Edit the text.  
Find it:  
Cleanup  
/
>
Messages  
>
/
>
MMS Setup  
>
delete only Quick Notes and reply  
phrases you have created  
1
2
Select Inbox or Outbox.  
1
2
3
From the MMS Setup menu, select Quick Notes  
or Replies  
Choose a cleanup option from the  
following list:  
.
Scroll to the Quick Note or reply phrase  
you want to delete.  
option  
Off: Messages are never automatically  
deleted.  
Press  
-
under Delete.  
main attractions  
42  
 
option  
option  
5 Messages: If you have more than 5  
messages, messages are deleted in the  
order they were received, starting with the  
oldest, until 5 are left.  
F-In F-Out: The earliest message added to the  
queue will be the first to be deleted (First in/  
first out). (MOSMS only)  
Custom: Lets you create a clean-up option of  
10 Messages: If you have more than 10  
messages, messages are deleted in the  
order they were received, starting with the  
oldest, until 10 are left.  
up to 99 messages or 99 days.  
3
Press  
-
under Yes to automatically delete  
messages now or press  
delete messages later.  
-
under No to  
With these options, messages are deleted  
in the order they were received, starting  
with the oldest, until the selected number  
are left.  
delete multiple or all messages  
To delete multiple messages, all read and  
unread unlocked messages from the MMS  
Inbox, all messages in the MMS Drafts folder,  
or all successfully sent messages in the MMS  
Outbox:  
1 Day: Messages are deleted if they are older  
than 1 day.  
3 Days: Messages are deleted if they are  
older than 3 days.  
Find it:  
/
>
Messages  
Drafts, or Outbox.  
With these options, messages are deleted  
when you exit the message center after  
setting the option.  
1
Select Inbox  
,
main attractions  
43  
2
3
Press  
Outbox  
/
>
MMS Inbox  
,
MMS Drafts, or MMS  
turn Bluetooth On or Off  
You can turn your phone’s Bluetooth feature  
on or off. While Bluetooth power is on, your  
phone can communicate with other devices.  
>
/
>
Delete Multiple, and check the  
messages you want to delete.  
or  
Select Delete All and press  
confirm.  
-
under Yes to  
Find it:  
/
>
Bluetooth  
>
Setup  
>
Power  
>
On  
1
Select Name if you wish to assign a name  
to your handset.  
Note: Locked messages cannot be deleted  
from the Inbox.  
2
Select Find Me Time to determine the  
amount of time in which your handset can  
be found by other Bluetooth devices.  
®
Bluetooth  
Tip: You can turn off Bluetooth if you want to  
prolong battery life or if you enter an area  
where Bluetooth is prohibited.  
Your phone supports the use of wireless  
Bluetooth headsets.  
Find it:  
/
>
Bluetooth  
The Bluetooth connection menu contains an  
option to search for audio devices.  
make a Bluetooth connection  
connect your phone with a Bluetooth  
headset  
Find it:  
/
>
Bluetooth  
>
Hands Free [Find Devices]  
>
main attractions  
44  
       
1
2
Follow the instructions on your Bluetooth  
headset to set it up to be found.  
to that device, enter the same PIN for  
both your phone and the device. For  
example, if you enter 1234 as the device’s  
PIN, then enter 1234 as your phone’s PIN.  
Once your Bluetooth headset is set to be  
found press  
phone will scan the Bluetooth headset  
until it finds it. Press when you see the  
r
on your handset. Your  
5
Press  
-
under Ok.  
r
Note: This handset offers a Bluetooth auto  
pair feature with auto pair compatible  
Motorola devices. When bonded via  
Bluetooth with a certain device, the pin will  
not be required.  
name of the Bluetooth headset on your  
screen.  
3
Your phone requires that you create a  
bond in order to connect with a Bluetooth  
headset. Press  
-
under Yes when you  
connect your phone with another  
device  
are prompted to bond with the headset.  
4
Enter the Bluetooth pass key.  
Find it:  
/
>
Bluetooth Link To Devices  
>
Some Bluetooth devices ship with  
Bluetooth PINs. Please refer to your  
Bluetooth device’s user guide to locate  
this information.  
1
Select the device you want from the list of  
found devices on your screen.  
2
Create a bond if you are prompted to do  
so.  
If a device ships without a Bluetooth PIN,  
then refer to its user guide to set the PIN  
on that device. To establish a connection  
main attractions  
45  
Tip: If you have previously connected to a  
device, the device will be stored on your  
phone so you can connect with it easily.  
send information via Bluetooth  
You can use your phone to send Contacts  
entries, or Datebook events to another  
Bluetooth device.  
use Bluetooth during a call  
You can connect with available Bluetooth  
devices during a call.  
The receiving device must be within 32 feet  
(10 meters) of your phone in order to connect  
with yours.  
Note: If the Handsfree Devices list contains only  
one device, then your phone will automatically  
try to connect to that device.  
Note: Files sent or received may be up  
to 200 kb, depending on your service  
provider.  
1
2
While in a call, press  
Press under Yes to power On  
Bluetooth.  
Select the audio device you want to  
/
>
Use Bluetooth.  
send Contacts  
-
Shortcut: From the home screen press  
under Contcs  
-
.
3
1
2
3
Select the contact you want to send.  
connect to from the list of Handsfree Devices  
.
Press  
Press  
/
>
Send Via...  
>
Bluetooth.  
-
under Yes to power On  
Bluetooth.  
main attractions  
46  
 
4
Select the device you want to transfer the  
contact information to.  
To send only the selected instance of the  
event, select This Event Only  
.
or  
or  
Search for the device by selecting [Find  
To send all instances of the event, select  
Devices]  
.
Repeat Events  
.
5
If prompted, bond with the device.  
3
Press  
Bluetooth.  
-
under Yes to power On  
Your phone connects with the device and  
transfers the contact.  
4
Select the device you want to transfer the  
contact information to.  
send a Datebook event  
Find it: Datebook  
or  
/
>
Search for the device by selecting [Find  
Devices]  
1
Select the datebook event you want to  
send.  
.
5
If prompted, bond with the device.  
2
Press  
/
>
Send Via...  
>
Bluetooth.  
Your phone connects with the device and  
sends the datebook event.  
If the event you select repeats, then you  
will be prompted to choose whether to  
send the selected instance of the event or  
all instances of the event.  
main attractions  
47  
basics  
See page 1 for a basic phone diagram.  
status indicators  
Status indicators are shown at the top of the  
home screen:  
display  
1. 2. 3. 4.  
5. 6. 7.  
The home screen shows when you turn on  
the phone. To dial a number from the home  
Ready  
10:05pm 10/23  
screen, press number keys and  
`.  
Note: Your home screen may look different.  
Ready  
10:05pm 10/23  
Date and  
Time  
1
2
Signal Strength Indicator: Vertical bars show  
the strength of the network connection. You  
Left  
Right  
Soft Key Label  
Soft Key Label  
can’t make or receive calls when  
shows.  
1
or  
0
Soft key labels show the current soft key  
Active Phone Line: 1 indicates phone line 1 is  
ready to make calls.  
functions. For soft key  
page 1.  
-
locations, see  
basics  
48  
         
3
Speaker Off: Sounds associated with Private  
calls are set to come through the earpiece  
rather than through the speaker.  
change the character input mode:  
1
When you see a screen where you can  
enter text, press to change the  
/
character input mode.  
4
Ringer Off: Your phone is set to not ring.  
2
Select one of the following options:  
5
Message Indicator: Shows when you  
receive a text message.  
entry modes  
6
7
Packet Data: Your handset is ready to transfer  
Alpha  
Press a key several times for  
each character.  
packet data or is transferring packet data.  
Battery Charge Indicator: A fuller battery  
Word  
Enter words using a predictive  
text entering system that lets  
you enter a word with fewer  
keypresses.  
indicates a greater charge. Recharge the  
battery when your phone shows Low Battery  
.
Symbols  
Numeric  
Enter symbols.  
text entry  
Some features let you enter text.  
Enter numbers by pressing the  
numbers on the keypad.  
Your phone provides convenient ways to enter  
words, letters, punctuation, and numbers  
whenever you are prompted to enter text (for  
example, when adding a Contacts entry or  
when text messaging).  
Languages Lets you select the input  
language.  
basics  
49  
             
Tip: When entering text, press and hold  
#
to  
and hold  
entire entry.)  
-
under Delete or  
*
to delete an  
change letter capitalization (Abc  
>
ABC  
>
abc).  
3
To accept a word and insert a space,  
press  
word mode  
#
.
Word English Text Input lets you enter text  
into your phone by pressing keys just once  
per letter.  
alpha mode  
enter characters by tapping the keypad:  
Word English Text Input analyzes the letters  
you enter using an intuitive word database  
and creates a suitable word. (The word may  
change as you type.)  
1
Select the Alpha mode.  
2
Press the corresponding keys repeatedly  
until the desired letter appears. (For  
example, to enter the word Jeff, press  
5
enter a word using Word Character  
Input:  
once,  
3
two times,  
3
three times, and  
3
three times again. If you make a  
1
Select the Word character input mode.  
mistake, press  
single character. Press and hold  
Delete to erase an entire entry.)  
-
under Delete to erase a  
-
under  
2
Press the corresponding keys once per  
letter to enter a word (for example, to  
enter the word Jeff, press 5 3 3 3). (If  
By default, the first letter of an entry is  
capitalized and the following letters are  
lowercased. After a character is entered, the  
cursor automatically advances to the next  
you make a mistake, press  
*
-
under Delete  
or to erase a single character. Press  
basics  
50  
   
space after two seconds or when you enter a  
character on a different key.  
volume  
Press the volume keys up  
or down to:  
Characters scroll in the following order:  
characters  
turn off an incoming  
call alert  
1
Space . 1 ? ! , @ & : ; “ - ( ) ‘ ¿ ¡ %  
£ $ ¥  
change the earpiece  
volume during calls  
2
3
4
5
6
7
8
9
0
#
*
A B C 2 Á Ã Â À Ç  
D E F 3 É Ê È  
G H I 4 Í Ì  
change the ringer  
volume from the  
home screen  
J K L 5  
Tip: You can quickly set your ringer to  
Vibrate All by holding the down volume  
key in the home screen.  
M N O 6 Ó Õ Ô Ò  
P Q R S 7 ß  
T U V 8 Ú Ü Û Ù  
W X Y Z 9  
+ - 0 * / \ [ ] = > < # §  
Space  
Back  
basics  
51  
           
navigation key  
transmitters  
Press the navigation key  
up, down, left, or right to  
scroll to items in the  
Note: Consult airline staff about the use of  
the Transmitters feature during flight. Turn off  
your phone whenever instructed to do so by  
airline staff.  
display. When you scroll  
to something, press  
r.  
Transmitters turns off your phone’s calling  
features in situations where wireless phone  
use is prohibited, but you can use the phone’s  
other non-calling features when Transmitters  
turned Off.  
handsfree speaker  
You can use your phone’s hands-free speaker  
to make calls without holding the phone to  
your ear.  
Find it:  
/
>
u
>
Advanced  
>
Transmitters  
>
Off  
During a call press the  
speaker key  
s
to  
turn the hands-free  
speaker on.  
The hands-free speaker stays on until you  
press the speaker key or end the call. The  
next phone call will redirect the audio back to  
the earpiece.  
basics  
52  
           
may need to adjust your hearing aid (HA)  
volume setting.  
features for the hearing  
impaired  
using your phone with a  
hearing aid  
For best results use the following optimization  
procedures and handset setting. They  
generally apply as well for users with cochlear  
implants:  
If your HA has a telecoil, activate its switch,  
then also rotate the handset as illustrated to  
align the telecoils.  
optimize your handset position and  
orientation  
While in a phone call slide your phone up and  
down, then left and right until best  
Note: Some automatically switched hearing  
aids may need an auxiliary switching magnet.  
microphone coupling is obtained. You also  
If you are unsure whether your HA is telecoil  
equipped or needs an auxiliary magnet,  
please refer to your HA user guide or contact  
a hearing aid professional or supplier.  
basics  
53  
   
3
Set this option to Off (factory default). This  
is the setting for non HA users.  
Approximate telecoil location is within  
6-13 mm of this location.  
Off - Shut off  
M - Microphone  
T - Telecoil  
Approximate telecoil location is just  
above the battery.  
choose your hearing aid setting  
Find it: Settings Phone Calls Hearing Aid.  
/
>
>
>
1
Set this option to Microphone. Microphone  
coupling is now optimized.  
or  
2
Set this option to Telecoil. Handset meets  
US federal requirements for telecoil  
coupling sound.  
or  
basics  
54  
calls  
To make and answer calls, see page 13.  
The recent calls list displays up to 20 of the  
most recent calls and call alerts.  
Find it:  
/
>
Recent Calls  
recent calls  
The Recent Calls list contains information  
associated with calls you have made and  
received and call alerts you have received.  
Tip: You can also access the Recent Calls list  
by pressing the navigation key down.  
1
2
Scroll through the list.  
When you send or receive Private calls, the  
Recent Call list contains the following PTT  
items with those calls:  
Highlight the item you want to view or  
perform some action on.  
3
To view more details of the item press  
r.  
Messages  
Pictures  
Events  
store an item to contacts from  
recent calls  
Phone calls, Private calls, My Info received  
from other phones, or Contacts entries  
received from other phones can be stored to  
the Contacts list from the Recent Calls list.  
My Info  
Contacts  
calls  
55  
       
Find it:  
/
>
Recent Calls  
voice names  
You can place calls by speaking commands to  
your phone if you have previously assigned a  
voice name to your contacts.  
1
Scroll to or select the item you want to  
store.  
2
Press  
-
under Save to store the  
information as a new entry in the  
Contacts list.  
assign voice names to contact  
1
2
3
4
Press  
- under Contcs and select [New  
or  
Contact]  
.
3
If Save is not one or you options, press  
/
Assign a name, phone number and select  
[Options]  
>
Update Contacts. And select the contact  
.
you want to update.  
Select Voice Name and follow the prompt to  
record the voice name.  
4
Press under Done to save your changes.  
-
Press  
save the entry.  
-
under Back and  
-
under Done to  
redial  
To redial your last outgoing phone call, press  
and hold or push the PTT button if it was a  
private call.  
place a call using voice command  
From the home screen press and hold the  
speaker key until you are prompted to  
say the voice name.  
The handset will automatically place the call.  
`
1
s
calls  
56  
       
different numbers depending on the reason  
you missed the call. You can forward phone  
lines 1 and 2 independently.  
caller ID  
Caller ID allows people to identify a  
caller before answering the phone by  
Find it:  
/
>
Call Forward  
displaying the number of the incoming call. If  
you do not want your number displayed when  
you make a call, just follow these easy steps.  
1
To forward all calls select All Calls and select  
To to enter the phone number you want all  
your calls forwarded to.  
To block your phone number from being  
displayed for a specific outgoing call:  
or  
2
You can specify a forwarding number for  
each type of missed call by selecting  
Detailed and choosing the following options:  
1
2
3
Press * 6 7..  
Enter the number you want to call.  
Press  
`.  
If Busy: When your handset is on a call or  
transferring data.  
To permanently block your number, call your  
service providers Customer Care.  
If No Answer: When you do not answer on  
the first 4 rings.  
call forward  
Call forwarding sends calls to the phone  
numbers you specify. You can forward all calls  
to one number or forward missed calls to  
If Unreachable: When your handset is out of  
coverage or powered off.  
calls  
57  
         
When you make an emergency call, your  
phone’s GPS Enabled feature can help  
emergency calls  
Your service provider programs one or more  
emergency phone numbers that you can call  
under any circumstances, even when your  
phone is locked or the SIM card is not  
inserted.  
emergency service personnel find you, if you  
are in a location where your phone's GPS  
antenna has established a clear view of the  
open sky and your local emergency response  
center has the equipment to process location  
information. Because of the limitations of this  
feature, always provide your best knowledge  
of your location to the emergency response  
center when you make an emergency call.  
Note: Emergency numbers vary by country.  
Your phone’s preprogrammed emergency  
number(s) may not work in all locations, and  
sometimes an emergency call cannot be  
placed due to network, environmental, or  
interference issues.  
Note: Emergency calls cannot be placed  
while the keypad is locked.  
Your phone supports emergency calling.  
Emergency phone calls can be made even  
when your SIM card is blocked or not in your  
phone.  
Note: If you have not registered on the  
network, emergency calls cannot be placed  
while your SIM card is in your phone.  
Dial 911 or your local emergency number to  
be connected to an emergency response  
center. If you are on an active call, you must  
end it before making an emergency call.  
international calls  
If your phone service includes international  
dialing, press and hold 0 to insert your local  
calls  
58  
           
international access code (indicated by +).  
Then, press the keypad keys to dial the  
country code and phone number.  
temporary prepend will be inserted to the  
number you are dialing.  
You can additionally enable a predefined prefix  
to the dialing number by using Prepend dialing.  
speed dial  
Each phone number stored in Contacts is  
assigned a Speed Dial number, which you can  
use to call that number.  
Find it:  
/
>
Settings  
>
Phone Calls  
>
.
Prepend  
1
2
Select Prepend and set it to On  
1
From the home screen, use the keypad to  
enter the Speed Dial number assigned to  
the phone number you want to call.  
Select Number and add the prefix number of  
your choice.  
When the Prepend feature is set to On, the  
predefined prefix is inserted to the front of  
the number that you are dialing.  
2
3
Press  
Press  
#.  
`
.
Except that the number is led by "*", "00",  
"011" or the number contains "+".  
turbo dial  
Note: You can also use Prepend temporarily  
when the feature is set to Off. For example,  
enter the phone number from the home  
The first nine entries in your contacts are set  
for turbo dial. They can be called by pressing  
and holding the speed dial number  
(1 through 9).  
screen and press  
/
>
Add Prepend. The  
calls  
59  
     
voice mail  
Note: To receive voice mail messages, you  
must first set up a voice mail account with  
your service provider.  
receive a message  
When you receive a voice mail message, New  
VoiceMail Message appears on the display.  
To check voicemail messages press  
-
under  
Call  
.
To dismiss the message notification:  
If the flip is closed, press the smart key  
the top.  
(
on  
If the flip is open, press  
flip.  
r,  
Back, or close the  
If the caller leaves a message, this icon  
3
appears on the display, reminding you that  
you have a new message.  
calls  
60  
       
customize  
making a sound; Silent sets your phone to  
neither vibrate nor make a sound.  
ring tones  
To set the ring tone your phone makes when  
you receive phone calls, call alerts, message  
notifications, pictures sent using Send via PTT  
or Datebook reminders:  
Tip: Highlighting a ring tone lets you hear  
it.  
3
Select the features you want to assign the  
ring tone to.  
Note: Only ring tones stored in your phone’s  
memory are available in the ring tones list.  
Not all audio files can be assigned as ring  
tones.  
4
When you are finished, press Done  
appears on the display if  
you set your phone to Silent. This icon  
appears on the display if you set the phone to  
.
Note: This icon  
,
5
Find it: / > Ring Tones  
Vibrate All  
.
1
2
Make sure Vibrate All is set to Off.  
Scroll through the list of ring tones and  
select the one you want to assign. Vibrate  
sets your phone to vibrate instead of  
set your phone to vibrate  
You can set your phone to vibrate instead of  
making a sound when you receive all phone  
calls, Private calls, call alerts, message  
customize  
61  
         
notifications, pictures sent using Send via PTT,  
and Datebook reminders.  
1
2
3
Make sure Vibrate All is set to Off.  
Select Vibrate from the list of ring tones.  
Find it:  
/
>
Ring Tones  
>
Vibrate All  
Select the features you want to set to  
make no sound.  
1
Set this option to On or Locked  
.
Setting this option to On lets you turn Vibrate  
All off by pressing the up volume control.  
Setting this option to Locked requires you to  
press and hold the up volume control to  
turn Vibrate All off. The Locked option helps  
prevent you from accidentally turning  
Vibrate All off.  
4
When you are finished, press  
-
under  
Done  
.
wallpaper  
Set a photo or picture as a wallpaper  
(background) image in your phone’s home  
screen or throughout all menu screens.  
To set Vibrate All to On or Locked using the volume  
controls: Press the volume controls to turn  
down the volume as far as possible to set  
Vibrate All to On. Continue to hold the down  
Find it:  
Wallpaper  
/
>
Settings  
>
Display/Info  
>
Wallpaper  
>
.
To select a wallpaper image scroll through the  
list of pictures and press  
picture of your choice.  
volume control to set Vibrate All to Locked  
.
r
to select the  
To set your phone to vibrate instead of making  
a sound for some features but not others:  
Note: You can set the wallpaper to change  
automatically after a certain period of time by  
Find it:  
/
>
Ring Tones  
customize  
62  
     
turning on the Auto Cycle feature located in the  
Wallpaper menu.  
option  
Daily Begin: Sets the beginning of your day.  
This is the earliest time of day displayed in  
week view, if you have a 12-hour day view.  
backlight  
Set the amount of time that the display and  
java apps. backlights remain on, or turn off the  
backlight feature to extend battery life.  
Delete After: Sets the amount of time  
Datebook waits to delete an event after it  
occurs.  
Time Shift: Lets you shift the times of all  
Datebook events. This is useful if you are  
traveling to a different time zone.  
Find it:  
/
>
Settings  
>
Display/Info  
>
Backlight  
datebook  
Find it:  
Alert Timeout: Sets the amount of time a tone  
continues to sound when you receive a  
Datebook reminder.  
/
>
Datebook  
>
/
>
Setup  
You can view or change these options:  
Clock: Controls whether the time and date  
appear on the home screen; sets time and  
date format.  
option  
Start View: Sets Datebook to start in day view,  
week view, or month view when you  
access Datebook.  
customize  
63  
       
permission. GPS-enhanced 911 is not  
available in all areas.  
hide or show  
location information  
Your phone is equipped with a Location  
feature for use in connection with location-  
based services that may be available in the  
future.  
set your privacy options  
Find it:  
/
>
GPS  
>
Privacy  
Select Restricted  
,
Unrestricted, or Ask Access  
.
The Location feature allows the network to  
detect your position. Turning Location off will  
hide your location from everyone except for  
your local emergency response center.  
Note: Turning Location on will allow the  
network to detect your position using GPS  
technology, making some applications and  
services easier to use. Turning Location off  
will disable the GPS location function for all  
purposes except 911, but will not hide your  
general location based on the cell site serving  
your call. No application or service may use  
your location without your request or  
customize  
64  
 
other features  
advanced calling  
feature  
feature  
flip  
activation  
To make your handset to  
answer and end calls by  
opening and closing the flip  
call waiting  
Find it: To accept the  
second call and put  
press  
/
>
u
>
the active call on hold press  
Phone Calls  
Select Flip To Ans  
to End On  
>
Flip Activation  
.
-
under Yes.  
>
On and Flip  
To accept the second call  
and end the active call press  
>
.
any key  
answer  
To answer phone calls by  
pressing any key on the  
`
.
Your phone rings with the  
second call for you to  
answer.  
keypad press  
/
>
u
>
On  
Phone Calls  
>
Any Key Ans  
>
.
other features - advanced calling  
65  
     
contacts  
datebook  
feature  
feature  
edit/delete  
Press  
-
under Contacts  
.
create  
datebook  
events  
To create a new Datebook  
event press  
[New Event].  
contact entry Select a contact and press  
/
>
D
>
/
>
Edit. Change the  
desired content and press  
see datebook To see a calendar event  
event  
-
under Done  
.
press  
/
>
D
> press the  
set ringer ID  
Press  
-
under Contacts  
.
navigation key left or right to  
see the day and up or down  
to see the events.  
Select a contact and press  
Ringer. Select  
desired ringer, press  
under Back, and under  
Done  
/
>
Edit  
>
-
event  
reminder  
When an event reminder  
-
occurs press  
Press under Back to close  
the reminder.  
-
under View.  
.
-
other features - contacts  
66  
       
feature  
GPS  
To improve GPS performance:  
receive  
datebook  
events via  
PTT  
To view the information  
while still in the Private call  
Stay in the open,  
press  
r.  
Move away from other electrical or  
electronic devices  
The 5 most recent events  
received from a Private ID  
are stored with the that  
Private ID on the recent  
calls list.  
Remain stationary.  
feature  
view  
To see your approximate  
approximate location press  
/
>
GPS  
>
-
location  
Position. Scroll to view the  
entire screen.  
To recalculate position press  
Rfrsh. This may take several  
minutes.  
other features - GPS  
67  
       
feature  
handsfree  
set GPS  
privacy  
options  
To set the level of privacy for  
your GPS system press  
Note: The use of wireless phones while  
driving may cause distraction. Discontinue a  
call if you can't concentrate on driving.  
Additionally, the use of wireless devices and  
their accessories may be prohibited or  
restricted in certain areas. Always obey the  
laws and regulations on the use of these  
products  
/
>
GPS  
>
Privacy.  
If your GPS PIN security  
feature is enabled, enter your  
GPS PIN and select the  
privacy option you want.  
change GPS Note: Your default GPS PIN is  
PIN  
0000.  
feature  
To change your GPS PIN press  
speaker-  
phone  
To activate the  
/
>
Settings  
>
Security  
>
Change  
speakerphone while  
driving press and hold  
the speakerphone key  
Passwds GPS PIN  
>
.
s
.
Enter the current GPS PIN and  
enter the new 4- to 8-digit  
GPS PIN. Re-enter the new  
4- to 8-digit GPS PIN to  
confirm.  
auto answer  
To automatically answer  
calls when connected to a  
car kit or headset press  
/
>
Settings  
>
Phone Calls  
>
Auto Ans. Select the amount  
of rings before answering.  
other features - handsfree  
68  
     
personalize  
pc applications  
feature  
feature  
language  
To set the language of your  
other PC  
applications applications visit  
For a list of complete PC  
menu press  
/
>
Settings  
>
Display/Info  
>
Language  
.
backlighttime To select how long the  
length  
display screen and keypad  
are backlit press  
TTY  
/
>
Settings  
>
Display/Info  
>
Backlight.  
feature  
menu style  
To show the Main Menu as  
graphic icons or a text-based  
turn On TTY From the home screen  
feature  
press  
Phone Calls  
/
>
Settings  
>
list press  
Display/Info  
/
>
Settings  
>
>
TTY Use TTY  
>
>
On.  
>
Menu View  
.
choose TTY From the home screen  
mode press  
clock display To display the clock on your  
home screen press  
/
>
Settings  
>
/
>
Phone Calls  
>
TTY Type.  
>
Settings  
Display  
>
>
Display/Info  
On  
>
Clock  
>
Select from TTY VCO or HCO.  
,
.
other features - personalize  
69  
                 
feature  
feature  
change the From the home screen  
keypad lock To lock the keypad press  
TTY baud  
rate  
press  
/
>
Settings  
>
/
>
Settings  
Keypad Lock  
Auto Lock  
>
Security  
Lock Now or  
>
Phone Calls  
>
TTY Baud  
>
.
>
.
Select 45.45 or 50.00  
.
Shortcut: To lock the  
keypad press  
enable SIM To enable SIM PIN, press  
PIN  
change TTY While in the TTY call, press  
/
>
*.  
mode  
/
>
In Call Setup  
>
TTY  
>
Type.  
during a call  
Select from TTY  
,
VCO or HCO  
.
/
>
Settings  
>
Security  
>
SIM PIN On  
>
.
security  
feature  
change SIM To change the SIM PIN,  
PIN press  
/
>
Settings  
>
>
Security  
.
>
Change Passwds SIM PIN  
phone lock  
To lock the phone press  
/
Lock  
>
>
Settings  
Lock Now or Auto Lock  
>
Security  
>
Phone  
.
Note: You can make emergency calls on a  
locked phone (see page 58).  
other features - security  
70  
       
Legal and Safety  
United States Federal Communications Commission, Code  
of Federal Regulations; 47 CFR part 2 sub-part J.  
Safety and General Information  
This section contains important information on the safe and  
efficient operation of your mobile device. Read this  
information before using your integrated multi-service  
portable radio.*  
American National Standards Institute (ANSI) / Institute of  
Electrical and Electronics Engineers (IEEE). C95. 1-1992.  
Institute of Electrical and Electronics Engineers (IEEE).  
C95. 1-2005 Edition.*  
Exposure to Radio Frequency (RF) Energy  
International Commission on Non-Ionizing Radiation  
Protection (ICNIRP) 1998.  
Your mobile device contains a transmitter and receiver. When it is  
ON, it receives and transmits RF energy. When you communicate  
with your phone, the system handling your call controls the power  
level at which your phone transmits.  
Ministry of Health (Canada). Safety Code 6. Limits of  
Human Exposure to Radio frequency Electromagnetic  
Fields in the Frequency Range from 3 kHz to 300 GHz,  
1999.  
Your mobile device is designed to comply with local regulatory  
requirements in your country concerning exposure of human beings  
to RF energy.  
Australian Communications Authority Radio  
communications (Electromagnetic Radiation - Human  
Exposure) Standard 2003.  
Portable Radio Product Operation and EME  
Exposure  
ANATEL, Brazil Regulatory Authority, Resolution 303 (July  
2, 2002) “Regulation of the limitation of exposure to  
Your Motorola radio product is designed to comply with the  
following national and international standards and guidelines  
regarding exposure of human beings to radio frequency  
electromagnetic energy (EME):  
*
The information provided in this document supersedes the general  
safety information in user’s guides published prior to May 1, 2006  
Legal and Safety  
71  
       
electrical, magnetic, and electromagnetic fields in the  
radio frequency range between 9 kHz and 300 GHz.”  
“Attachment to Resolution 303 from July 2, 2002."  
When using your radio product as a traditional  
two-way radio, hold the radio product in a  
vertical position with the microphone one  
to two inches (2.5 to 5 cm) away from the  
lips  
.
Operational Precautions  
For optimal mobile device performance, and to be sure that human  
exposure to RF energy does not exceed the guidelines set forth in  
the relevant standards, always follow these instructions and  
precautions.  
If you wear the mobile device on your body,  
always place the mobile device in a Motorola approved clip,  
holder, holster, case or body harness. If you do not use a body-worn  
accessory supplied or approved by Motorola and are not using the  
mobile device in the intended use positions along side the head in  
the phone mode or in front of the face in the two-way radio mode,  
or if you hang your device from a lanyard around your neck, keep  
the device at least 2.5 centimeters (1 inch) from your body when  
transmitting.  
Phone Operation  
When placing or receiving a phone call, hold your mobile phone as  
you would a landline telephone. Speak directly into the  
microphone  
.
Approved Accessories  
For a list of approved Motorola accessories call 1-800-453-0920, or  
Two-way radio operation  
Your radio product has been designed and tested to comply with  
national and international standards and guidelines regarding  
human exposure to RF electromagnetic energy, when operated in  
the two-way mode (at the face, or at the abdomen when using an  
audio accessory) at usage factors of up to 50% talk/50% listen.  
RF Energy Interference/Compatibility  
Nearly every electronic device is subject to RF energy interference  
from external sources if inadequately shielded, designed or  
otherwise configured for RF energy compatibility. In some  
circumstances your mobile device may cause interference with  
other devices.  
Transmit no more than the rated duty factor of 50% of the time. To  
transmit (talk), push the PTT button. To receive calls, release the  
PTT button. Transmitting 50% of the time or less, is important  
because this radio generates measurable RF energy only when  
transmitting (in terms of measuring for standards compliance).  
Legal and Safety  
72  
     
your mobile device with your implantable medical device, consult  
your health care provider.  
Follow Instructions to Avoid Interference  
Problems  
Turn OFF your mobile device in any location where posted notices  
Hearing Aids  
Some phones may interfere with some hearing aids. In the event of  
such interference, you may want to consult your hearing aid  
manufacturer or physician to discuss alternatives.  
instruct you to do so.  
In an aircraft, turn off your mobile device whenever instructed to  
do so by airline staff. If your mobile device offers an airplane mode  
or similar feature, consult airline staff about using it in flight.  
Other Medical Devices and Health Care Facilities  
Implantable Medical Devices  
If you have an implantable medical devices, such as a pacemaker  
or defibrillator, consult your physician before using this mobile  
device.  
If you use any other personal medical devices, consult your  
physician or the manufacturer or your device to determine if it is  
adequately shielded from RF energy. Turn off your radio product  
when instructed to do so in hospitals or health care facilities that  
may be using equipment that is sensitive to external RF energy.  
Persons with implantable medical devices should observe the  
following precautions:  
Bluetooth  
ALWAYS keep the mobile device more than 20  
centimeters (8 inches) from the implantable medical  
device when the phone is turned ON.  
This device supports Bluetooth 1.2 including HSP, HFP, OPP, DUN,  
PBAP, and BPP. In order for Bluetooth devices to communicate with  
one another, they must utilize the same Bluetooth profile. To  
determine the profiles supported by other Motorola devices, visit  
respective manufacturer.  
DO NOT carry the mobile device in the breast pocket;  
Use the ear opposite the implantable medical device to  
minimize the potential for interference.  
Turn OFF the mobile device immediately if you have any  
reason to suspect that interference is taking place.  
Certain Bluetooth features including those listed may not be  
supported by all compatible Bluetooth-enabled devices, and/or the  
functionality of such features may be limited in certain devices, or  
by certain wireless carriers. Contact your wireless carrier about  
feature availability and functionality.  
Read and follow the directions from the manufacturer of your  
implantable medical device. If you have any questions about using  
Legal and Safety  
73  
 
Caring for the Environment by  
Recycling  
Driving Precautions  
The use of wireless phones while driving may cause distraction.  
Discontinue a call if you can’t concentrate on driving.  
This symbol on a Motorola product means the  
product should not be disposed of with household  
waste.  
Additionally, the use of wireless devices and their accessories may  
be prohibited or restricted in certain areas. Always obey the laws  
and regulations on the use of these products.  
Disposal of your Mobile Device and Accessories  
Responsible driving practices can be found in the “Smart Practices  
While Driving” section (see page 87).  
Please do not dispose of mobile devices or electrical accessories  
(such as chargers, headsets, or batteries) with your household  
waste. These items should be disposed of in accordance with the  
national collection and recycling schemes operated by your local or  
regional authority. Alternatively, you may return unwanted mobile  
devices and electrical accessories to any Motorola Approved  
Service Center in your region. Details of Motorola approved  
national recycling schemes, and further information on Motorola  
recycling activities can be found at: www.motorola.com/recycling  
Operational Warnings  
Obey all posted signs when using Mobile devices in public areas.  
Potentially Explosive Atmospheres  
Areas with potentially explosive atmospheres are often but not  
always posted, and can include fueling areas such as below decks  
on boats, fuel or chemical transfer or storage facilities, or areas  
where the air contains chemicals or particles, such as grain, dust  
or metal powders.  
Disposal of your Mobile Device Packaging and  
User’s Guide  
When you are in such area, turn off your handset, and do not  
remove, install, or charge batteries unless it is a radio product type  
especially qualified for use in such areas as “Intrinsically Safe” (for  
example, Factory Mutual, CSA, or UL approved). In such areas,  
sparks can occur and cause an explosion or fire.  
Product packaging and user’s guides should only be disposed of in  
accordance with national collection and recycling requirements.  
Please contact your regional authorities for more details.  
Legal and Safety  
74  
     
Symbol Key  
Your battery, charger, or portable radio may contain symbols,  
defined as follows:  
Symbol  
Definition  
Listening at full volume to  
music or voice through a  
headset may damage your  
hearing.  
Symbol  
Definition  
032374o  
Important safety information  
follows.  
Batteries and Chargers  
Do not dispose of your battery  
or phone in a fire.  
Caution: Improper treatment or use of batteries may present  
a danger of fire, explosion, leakage, or other hazard. For  
more information, see the “Battery Use and Battery Safety”  
section in this user’s guide.  
Your battery or phone may  
require recycling in  
032375o  
accordance with local laws.  
Contact your local regulatory  
authorities for more  
Keep Your Mobile Device and Its Accessories  
Away from Small Children  
These products are not toys and may be hazardous to small  
children. For example:  
information.  
Do not throw your battery or  
phone in the trash.  
A choking hazard may exist for small, detachable parts.  
Improper use could result in loud sounds, possibly causing  
hearing injury.  
Your phone contains an  
internal lithium ion battery.  
Li Ion BATT  
032378o  
Improperly handled batteries could overheat and cause a  
burn.  
Do not let your battery,  
charger, or phone get wet.  
Glass Parts  
Some parts of your mobile device may be made of glass. This glass  
could break if the product is dropped on a hard surface or receives  
Legal and Safety  
75  
a substantial impact. If glass breaks, do not touch or attempt to  
remove. Stop using your mobile device until the glass is replaced  
by a qualified service center.  
Limit the amount of time you use headsets or headphones  
at high volume.  
Avoid turning up the volume to block out noisy  
surroundings.  
Seizures/Blackouts  
Turn the volume down if you can’t hear people speaking  
near you.  
Some people may be susceptible to epileptic seizures or blackouts  
when exposed to flashing lights, such as when playing video  
games. These may occur even if a person has never had a previous  
seizure or blackout.  
If you experience hearing discomfort, including the sensation of  
pressure or fullness in your ears, ringing in your ears, or muffled  
speech, you should stop listening to the device through your  
headset or headphones and have your hearing checked.  
If you have experienced seizures or blackouts, or if you have a  
family history of such occurrences, please consult with your  
physician before playing video games or enabling a flashing-lights  
feature (if available) on your mobile device.  
For more information about hearing, see our Web site at  
www.motorola.com/hearingsafety (in English only).  
Discontinue use and consult a physician if any of the following  
symptoms occur: convulsion, eye or muscle twitching, loss of  
awareness, involuntary movements, or disorientation. It is always  
a good idea to hold the screen away from your eyes, leave the  
lights on in the room, take a 15-minute break every hour, and stop  
use if you are very tired.  
Repetitive Motion  
When you repetitively perform actions such as pressing keys or  
entering finger-written characters, you may experience occasional  
discomfort in your hands, arms, shoulders, neck, or other parts of  
your body. If you continue to have discomfort during or after such  
use, stop use and see a physician.  
Caution About High Volume Usage  
Warning: Warning: Exposure to loud noise from any  
source for extended periods of time may affect your  
hearing. The louder the volume sound level, the  
Service and Repairs  
If you have questions or need assistance, we’re here to help.  
Go to www.motorola.com/support, where you can select from  
a number of customer care options. You can also contact the  
Motorola Customer Support Center at 1 (800) 453-0920 (United  
less time is required before your hearing could be  
affected. To protect your hearing:  
Legal and Safety  
76  
   
States), 1 (877) 483-2840 (TTY, TDD United States for hearing  
impaired).  
Remove the battery and inspect it to confirm it bears a  
Motorola “Original Equipment” hologram;  
If there is no hologram, the battery is not a qualified  
battery;  
Export Law Assurances  
If there is a hologram, replace the battery and retry  
charging it;  
This product is controlled under the export regulations of the  
United States of America and Canada. The Governments of the  
United States of America and Canada may restrict the exportation  
or re-exportation of this product to certain destinations. For further  
information contact the U.S. Department of Commerce or the  
Canadian Department of Foreign Affairs and International Trade.  
If the message remains, contact a Motorola Authorized  
Service Center.  
When storing your battery, keep it in a cool, dry place.  
It is normal over time for battery life to decrease, and for  
the battery to exhibit shorter runtime between charges or  
require more frequent or longer charging times.  
Battery Use and Safety  
Motorola recommends you always use  
Motorola-branded batteries and chargers. The  
warranty does not cover damage caused by non-Motorola  
batteries and/or chargers.  
Important: Handle and store batteries properly to avoid  
injury or damage. Most battery issues arise from improper  
handling of batteries, and particularly from the continued use of  
damaged batteries.  
Caution: Use of an unqualified battery or charger may  
present a risk of fire, explosion, leakage, or other hazard.  
Improper battery use, or use of a damaged battery, may  
result in a fire, explosion, or other hazard.  
DON’Ts  
Don’t disassemble, crush, puncture, shred, or  
otherwise attempt to change the form of your  
battery.  
Battery usage by children should be supervised.  
Don’t let the phone or battery come in contact with  
water. Water can get into the phone’s circuits, leading to  
corrosion. If the phone and/or battery get wet, have them  
checked by your carrier or contact Motorola, even if they  
appear to be working properly.  
Important: Motorola mobile devices are designed to work  
best with qualified batteries. If you see a message on your  
display such as Invalid Battery or Unable to Charge, take the  
following steps:  
Legal and Safety  
77  
     
Don’t allow the battery to touch metal objects. If  
metal objects, such as jewelry, stay in prolonged contact  
with the battery contact points, the battery could become  
very hot.  
Motorola recommends you always use Motorola-branded  
batteries and chargers. Motorola mobile devices are designed  
to work with Motorola batteries. If you see a message on your  
display such as Invalid Battery or Unable to Charge, take the following  
steps:  
Don’t place your battery near a heat source.  
Excessive heat can damage the phone or the battery. High  
temperatures can cause the battery to swell, leak, or  
malfunction. Therefore:  
Remove the battery and inspect it to confirm that it has a  
“Motorola Original” hologram;  
If there is no hologram, the battery is not a Motorola  
battery;  
Do not dry a wet or damp battery with an appliance or  
heat source, such as a hair dryer or microwave oven.  
If there is a hologram, replace the battery and retry  
charging it;  
Avoid leaving your phone in your car in high temperatures.  
DOs  
If the message remains, contact a Motorola authorized  
service center.  
Do avoid dropping the battery or phone. Dropping  
these items, especially on a hard surface, can potentially  
cause damage.  
Important: Motorola’s warranty does not cover damage to the  
phone caused by non-Motorola batteries and/or chargers.  
Do contact your service provider or Motorola if your  
phone or battery has been damaged from dropping  
or high temperatures.  
Warning: Use of a non-Motorola battery or charger may present a  
risk of fire, explosion, leakage, or other hazard.  
Proper and safe battery disposal and recycling: Proper  
battery disposal is not only important for safety, it benefits the  
environment. Consumers may recycle their used batteries in many  
retail or service provider locations. Additional information on  
proper disposal and recycling may be found on the Web:  
Important: Use Motorola Original products for quality  
assurance and safeguards. To aid consumers in identifying  
authentic Motorola batteries from non-original or counterfeit  
batteries (that may not have adequate safety protection), Motorola  
provides holograms on its batteries. Consumers should confirm  
that any battery they purchase has a “Motorola Original”  
hologram.  
www.rbrc.org/call2recycle/ (in English only)  
Legal and Safety  
78  
Disposal: Promptly dispose of used batteries in accordance with  
local regulations. Contact your local recycling center or national  
recycling organizations for more information on how to dispose of  
batteries.  
Commission (FCC) of the U.S. Government and by the Canadian  
regulatory authorities. These limits are part of comprehensive  
guidelines and establish permitted levels of RF energy for the  
general population. The guidelines are based on standards that  
were developed by independent scientific organizations through  
periodic and thorough evaluation of scientific studies. The  
standards include a substantial safety margin designed for the  
safety of all persons, regardless of age or health, and to account  
for any variations in measurements.  
Warning: Never dispose of batteries in a fire because they may  
explode.  
Battery Charging  
Notes for charging your phone’s battery:  
The exposure standard for mobile devices employs a unit of  
measurement known as the Specific Absorption Rate (SAR). The  
SAR limit set by the FCC and by the Canadian regulatory  
authorities is 1.6 watts per kilogram (W/kg), averaged over one  
gram of tissue. Tests for SAR are conducted using procedures  
accepted by the FCC and by Industry Canada with the mobile  
device transmitting at its highest certified power level in all tested  
frequencies. Although the SAR is determined at the highest  
certified power level, the actual SAR level of the mobile device  
while operating can be below the maximum value. This is because  
the mobile device is designed to operate at multiple power levels  
so as to use only the power required to reach the network. In  
general, the closer you are to a wireless base station, the lower  
the power output.  
When charging your battery, keep it near room  
temperature. Never expose batteries to temperatures  
below 0°C (32°F) or above 45°C (113°F) when charging.  
New batteries are not fully charged.  
New batteries or batteries stored for a long time may take  
more time to charge.  
Motorola batteries and charging systems have circuitry  
that protects the battery from damage from overcharging.  
Specific Absorption Rate  
Your model wireless phone meets the governmental  
requirements for exposure to radio waves.  
Your mobile device is a radio transmitter and receiver. It is  
designed and manufactured to not exceed limits for exposure to  
radio frequency (RF) energy set by the Federal Communications  
Before a mobile device is available for sale to the public in the U.S.  
and Canada, it must be tested and certified to the FCC and Industry  
Canada that it does not exceed the limit established by each  
government for safe exposure. The tests are performed in  
positions and locations (e.g., at the ear and worn on the body)  
Legal and Safety  
79  
   
submitted to the FCC and available for review by Industry Canada.  
The highest SAR value for this mobile device when tested for use  
at the ear is 0.72 W/kg, and when worn on the body, as described  
in this guide, is 1.03 W/kg. Body-worn measurements can differ,  
depending upon available accessories and regulatory  
requirements. The SAR information includes the Motorola testing  
protocol, assessment procedure, and measurement uncertainty  
range for this product.  
The AGPS feature has limitations, so always tell the emergency  
response center your best knowledge of your location. Remain on  
the phone for as long as the emergency response center instructs  
you.  
AGPS might not work for emergency calls, if your local  
emergency response center does not process AGPS location  
information. For details, contact your local authorities.  
If your mobile device cannot find strong AGPS satellite signals, the  
location of the nearest cell tower in contact with your mobile  
device is automatically provided to the emergency response  
center.  
While there may be differences between the SAR levels of various  
mobile devices and at various positions, they meet the  
governmental requirements for safe exposure. Please note that  
improvements to this product model could cause differences in the  
SAR value for later products; in all cases, products are designed to  
be within the guidelines.  
AGPS Performance Tips  
Go outside and away from underground locations, covered  
vehicles, structures with metal or concrete roofs, tall  
buildings, and foliage. Indoor performance might improve  
if you move closer to windows, but some window sun  
shielding films can block satellite signals.  
Additional information on SAR can be found on the Cellular  
Telecommunications & Internet Association (CTIA) Web site:  
or the Canadian Wireless Telecommunications Association (CWTA)  
Web site:  
Move away from radios, entertainment equipment, and  
other electronic devices that might interfere with or block  
AGPS satellite signals.  
AGPS uses satellites controlled by the U.S. government and  
subject to changes implemented in accordance with the  
Department of Defense AGPS user policy and the Federal Radio  
Navigation Plan. These changes might affect AGPS performance.  
AGPS and Emergency Calls  
When you make an emergency call, your mobile device can use  
Assisted Global Positioning System (AGPS) satellite signals to tell  
the emergency response center your approximate location.  
Legal and Safety  
80  
 
Motorola Limited Warranty for the  
United States and Canada  
Products Covered  
Length of Coverage  
Accessories as  
defined above.  
Ninety (90) days from the date of  
purchase by the first consumer  
purchaser of the product.  
What Does this Warranty Cover?  
Note: FOR IDEN SUBSCRIBER PRODUCTS, ACCESSORIES  
AND SOFTWARE PURCHASED IN THE UNITED STATES OR  
CANADA  
Subject to the exclusions contained below, Motorola, Inc. warrants  
its Motorola iDEN Digital Mobile and Portable Handsets  
("Products"), Motorola-branded or certified accessories sold for  
use with these Products ("Accessories") and Motorola software  
contained on CD-Roms or other tangible media and sold for use  
with these Products ("Software") to be free from defects in  
materials and workmanship under normal consumer usage for the  
period(s) outlined below. This limited warranty is a  
Products or  
The balance of the original  
warranty or for ninety (90) days  
from the date returned to the  
consumer, whichever is longer.  
Accessories that are  
Repaired or  
Replaced.  
Software as defined  
above. Applies only to  
physical defects in the  
media that embodies  
the copy of the software  
(e.g. CD-ROM, or floppy  
disk).  
Ninety (90) days from the date  
of purchase  
.
consumer's exclusive remedy, and applies as follows to  
new Products, Accessories and Software purchased by  
consumers in the United States or Canada, which are  
accompanied by this written warranty:  
What is not covered? (Exclusions)  
Normal Wear and Tear. Periodic maintenance, repair and  
replacement of parts due to normal wear and tear are excluded  
from coverage.  
Products Covered  
Length of Coverage  
Ornamental Decorations. Ornamental decorations such as  
emblems, graphics, rhinestones, jewels, gemstones and their  
settings, and other decorative elements, are excluded from  
coverage.  
Products as defined  
above.  
Ninety (90) days from the date of  
purchase by the first consumer  
purchaser of the product.  
Legal and Safety  
81  
 
Batteries. Only batteries whose fully charged capacity falls below  
80% of their rated capacity and batteries that leak are covered by  
this limited warranty.  
non-Motorola housings, antennas, or parts, are excluded from  
coverage.  
Communication Services. Defects, damages, or the failure of  
Products, Accessories or Software due to any communication  
service or signal you may subscribe to or use with the Products,  
Accessories or Software is excluded from coverage.  
Abuse & Misuse. Defects or damage that result from: (a)  
improper operation, storage, misuse or abuse, accident or neglect,  
such as physical damage (cracks, scratches, etc.) to the surface of  
the product resulting from misuse; (b) contact with liquid, water,  
rain, extreme humidity or heavy perspiration, sand, dirt or the like,  
extreme heat, or food; (c) use of the Products or Accessories for  
commercial purposes or subjecting the Product or Accessory to  
abnormal usage or conditions; or (d) other acts which are not the  
fault of Motorola, are excluded from coverage.  
Software Embodied in Physical Media. No warranty is made  
that the software will meet your requirements or will work in  
combination with any hardware or software applications provided  
by third parties, that the operation of the software products will be  
uninterrupted or error free, or that all defects in the software  
products will be corrected.  
Use of Non-Motorola Products and Accessories. Defects or  
damage that result from the use of Non-Motorola branded or  
certified Products, Accessories, Software or other peripheral  
equipment are excluded from coverage.  
Software NOT Embodied in Physical Media. Software that is  
not embodied in physical media (e.g. software that is downloaded  
from the internet), is provided "as is" and without warranty.  
Who is covered? This warranty extends only to the first  
consumer purchaser, and is not transferable.  
Unauthorized Service or Modification. Defects or damages  
resulting from service, testing, adjustment, installation,  
maintenance, alteration, including without limitation, software  
changes, or modification in any way by someone other than  
Motorola, or its authorized service centers, are excluded from  
coverage.  
What will Motorola Do? Motorola, at its option, will at no  
charge repair, replace or refund the purchase price of any Products,  
Accessories or Software that does not conform to this warranty.  
We may use functionally equivalent  
reconditioned/refurbished/pre-owned or new Products,  
Accessories or parts. No data, software or applications added to  
your Product, Accessory or Software, including but not limited to  
personal contacts, games and ringer tones, will be reinstalled. To  
avoid losing such data, software and applications please create a  
back up prior to requesting service.  
Altered Products. Products or Accessories with (a) serial  
numbers or date tags that have been removed, altered or  
obliterated; (b) broken seals or that show evidence of tampering;  
(c) mismatched board serial numbers; or (d) nonconforming or  
Legal and Safety  
82  
How to Obtain Warranty Service or Other Information? To  
CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF  
REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF  
INFORMATION OR DATA, SOFTWARE OR APPLICATIONS OR  
OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION  
WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS,  
ACCESSORIES OR SOFTWARE TO THE FULL EXTENT THESE  
DAMAGES MAY BE DISCLAIMED BY LAW.  
obtain service or information, please call:  
Motorola iDEN Customer Services 1-800-453-0920 or  
954-723-4910  
TTY-877-483-2840  
Some states and jurisdictions do not allow the limitation or  
exclusion of incidental or consequential damages, or limitation on  
the length of an implied warranty, so the above limitations or  
exclusions may not apply to you. This warranty gives you specific  
legal rights, and you may also have other rights that vary from  
state to state or from one jurisdiction to another.  
You will receive instructions on how to ship the Products,  
Accessories or Software, at your expense, to a Motorola  
Authorized Repair Center. To obtain service, you must include: (a) a  
copy of your receipt, bill of sale or other comparable proof of  
purchase; (b) a written description of the problem; (c) the name of  
your service provider, if applicable; (d) the name and location of the  
installation facility (if applicable) and, most importantly; (e) your  
address and telephone number.  
Laws in the United States and other countries preserve for  
Motorola certain exclusive rights for copyrighted Motorola  
software such as the exclusive rights to reproduce and distribute  
copies of the Motorola software. Motorola software may only be  
copied into, used in, and redistributed with, the Products  
associated with such Motorola software. No other use, including  
without limitation disassembly of such Motorola software or  
exercise of the exclusive rights reserved for Motorola, is  
permitted.  
What Other Limitations Are There? ANY IMPLIED  
WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED  
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF  
THIS LIMITED WARRANTY, OTHERWISE THE REPAIR,  
REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS EXPRESS  
LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE  
CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER  
WARRANTIES, EXPRESS OF IMPLIED. IN NO EVENT SHALL  
MOTOROLA BE LIABLE, WHETHER IN CONTRACT OR TORT  
(INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE  
PURCHASE PRICE OF THE PRODUCT, ACCESSORY OR SOFTWARE,  
OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR  
Patent and Software Provisions:  
MOTOROLA will defend, at its own expense, any suit brought  
against the end user purchaser to the extent that it is based on a  
claim that the Product or parts infringe a patent, and Motorola will  
pay those costs and damages finally awarded against the end user  
Legal and Safety  
83  
purchaser in any such suit which are attributable to any such  
claim, but such defense and payments are conditioned on the  
following:  
damages arising from any claim of patent infringement or alleged  
infringement.  
Laws in the United States and other countries preserve for  
MOTOROLA certain exclusive rights for copyrighted MOTOROLA  
software, such as the exclusive rights to reproduce in copies and  
distribute copies of such MOTOROLA software. MOTOROLA  
software may be used in only the Product in which the software  
was originally embodied and such software in such Product may  
not be replaced, copied, distributed, modified in any way, or used  
to produce any derivative thereof. No other use including, without  
limitation, alteration, modification, reproduction, distribution, or  
reverse engineering of such MOTOROLA software or exercise or  
rights in such MOTOROLA software is permitted. No license is  
granted by implication, estoppel or otherwise under MOTOROLA  
patent rights or copyrights.  
That MOTOROLA will be notified promptly in writing by  
such purchaser of any notice of such claim;  
That MOTOROLA will have sole control of the defense of  
such suit and all negotiations for its settlement or  
compromise; and  
Should the Product or parts become, or in MOTOROLA’S  
opinion be likely to become, the subject of a claim of  
infringement of a patent, that such purchaser will permit  
MOTOROLA, at its option and expense, either to procure  
for such purchaser the right to continue using the Product  
or parts or to replace or modify the same so that it  
becomes non infringing or to grant such purchaser a credit  
for the Product or parts as depreciated and accept its  
return. The depreciation will be an equal amount per year  
over the lifetime of the Product or parts as established by  
MOTOROLA.  
Hearing Aid Compatibility With Mobile  
Phones  
Some Motorola phones are measured for compatibility with  
hearing aids. If the box for your particular model has “Rated for  
Hearing Aids” printed on it, the following explanation applies.  
When some mobile phones are used near some hearing devices  
(hearing aids and cochlear implants), users may detect a buzzing,  
humming, or whining noise. Some hearing devices are more  
immune than others to this interference noise, and phones also  
vary in the amount of interference they generate.  
MOTOROLA will have no liability with respect to any claim of  
patent infringement which is based upon the combination of the  
Product or parts furnished hereunder with software, apparatus or  
devices not furnished by MOTOROLA, nor will MOTOROLA have  
any liability for the use of ancillary equipment or software not  
furnished by MOTOROLA which is attached to or sued in  
connection with the Product or any parts thereof. In no event shall  
MOTOROLA be liable for any incidental, special or consequential  
Legal and Safety  
84  
   
The wireless telephone industry has developed ratings for some of  
their mobile phones, to assist hearing device users in finding  
phones that may be compatible with their hearing devices. Not all  
phones have been rated. Phones that are rated have the rating on  
their box or a label on the box.  
Information From the World Health  
Organization  
Present scientific information does not indicate the need for any  
special precautions for the use of mobile phones. If you are  
concerned, you may want to limit your own or your children’s RF  
exposure by limiting the length of calls or by using hands-free  
devices to keep mobile phones away from your head and body.  
The ratings are not guarantees. Results will vary depending on the  
user’s hearing device and hearing loss. If your hearing device  
happens to be vulnerable to interference, you may not be able to  
use a rated phone successfully. Trying out the phone with your  
hearing device is the best way to evaluate it for your personal  
needs.  
Source: WHO Fact Sheet 193  
Further information: http://www.who.int./peh-emf  
.
M-Ratings: Phones rated M3 or M4 meet FCC requirements and  
are likely to generate less interference to hearing devices than  
phones that are not labeled. M4 is the better/higher of the two  
ratings.  
Product Registration  
Online Product Registration:  
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are  
likely to be more usable with a hearing device’s telecoil (“T  
Switch” or “Telephone Switch”) than unrated phones. T4 is the  
better/higher of the two ratings. (Note that not all hearing devices  
have telecoils in them.)  
Product registration is an important step toward enjoying your new  
Motorola product. Registering permits us to contact you for  
product or software updates and allows you to subscribe to  
updates on new products or special promotions. Registration is not  
required for warranty coverage.  
Hearing devices may also be measured for immunity to this type of  
interference. Your hearing device manufacturer or hearing health  
professional may help you find results for your hearing device. The  
more immune your hearing aid is, the less likely you are to  
experience interference noise from mobile phones.  
Please retain your original dated sales receipt for your records. For  
warranty service of your Motorola Personal Communications  
Product you will need to provide a copy of your dated sales receipt  
to confirm warranty status.  
Thank you for choosing a Motorola product.  
Legal and Safety  
85  
     
Wireless: The New Recyclable  
Your wireless phone can be recycled. Recycling your phone  
reduces the amount of waste disposed in landfills and allows  
recycled materials to be incorporated into new products.  
Patent and Trademark Information  
MOTOROLA, the Stylized M Logo and all other trademarks  
indicated as such herein are trademarks of Motorola, Inc. ® Reg.  
U.S. Pat. & Tm. Off. © 2009 Motorola, Inc. All rights reserved.  
The Cellular Telecommunications Industry Association (CTIA) and  
its members encourage consumers to recycle their phones and  
have taken steps to promote the collection and environmentally  
sound recycling of end-of-life devices.  
Microsoft and Microsoft Internet Explorer are registered  
trademarks of Microsoft Corporation.  
T9 is a trademark owned by Tegic Communications.  
T9® Text Input Patent and Trademark Information.  
As a phone user, you have an important role in ensuring that this  
device is recycled properly. When it comes time to give this phone  
up or trade it in for a new one, please remember that the phone,  
the charger, and many of its accessories can be recycled. It's easy.  
To learn more about CTIA's Recycling Program for Used Wireless  
Devices, please visit us at:  
This product is covered by U.S. Pat. 5,818,437, U.S. Pat. 5,953,541,  
U.S. Pat. 6,011,554 and other patents pending.  
Java and all other Java-based marks are trademarks or registered  
trademarks of Sun Microsystems, Inc. in the U.S. and other  
countries.  
All other product names or services mentioned in this manual are  
the property of their respective trademark owners.  
California Perchlorate Label  
Some mobile phones use an internal, permanent backup battery on  
the printed circuit board that may contain very small amounts of  
perchlorate. In such cases, California law requires the following  
label:  
Software Copyright Notice  
Motorola products may include copyrighted Motorola and third  
party software stored in semiconductor memories or other media.  
Laws in the United States and other countries preserve for  
Motorola and third party software providers certain exclusive  
rights for copyrighted software, such as the exclusive rights to  
distribute or reproduce the copyrighted software. Accordingly, any  
copyrighted software contained in the Motorola products may not  
be modified, reverse-engineered, distributed, or reproduced in any  
Perchlorate Material - special handling may apply. See  
.
There is no special handling required by consumers.  
Legal and Safety  
86  
         
manner to the extent allowed by law. Furthermore, the purchase of  
Motorola products shall not be deemed to grant either directly or  
by implication, estoppel, or otherwise, any license under the  
copyrights, patents, or patent applications of Motorola or any third  
party software provider, except for the normal, non-exclusive,  
royalty-free license to use that arises by operation of law in the  
sale of a product.  
Understanding AGPS—To provide location information  
for emergency calls, certain Motorola mobile devices  
incorporate Assisted Global Positioning System (AGPS)  
technology. AGPS technology also can be used in  
non-emergency applications to track and monitor a users  
location—for example, to provide driving directions. Users  
who prefer not to permit such tracking and monitoring  
should avoid using such applications.  
If you have further questions regarding how the use of your mobile  
device may impact your privacy or data security, please contact  
Motorola at [email protected], or contact your service  
provider.  
Privacy and Data Security  
Motorola understands that privacy and data security are important  
to everyone. Because some features of your mobile device may  
affect your privacy or data security, please follow these  
recommendations to enhance protection of your information:  
Smart Practices While Driving  
Monitor access—Keep your mobile device with you and  
do not leave it where others may have unmonitored  
access. Lock your device’s keypad where this feature is  
available.  
SM  
Drive Safe, Call Smart  
Check the laws and regulations on the use of phones and  
their accessories in the areas where you drive. Always  
obey them. The use of these devices may be prohibited or  
restricted in certain areas—for example handsfree use  
for more information.  
Keep software up to date—If Motorola or a  
software/application vendor releases a patch or software  
fix for your mobile device that updates the device’s  
security, install it as soon as possible.  
Erase before recycling—Delete personal information  
or data from your mobile device prior to disposing of it or  
turning it in for recycling. For instructions on how to delete  
all personal information from your device, please contact  
your local service provider.  
Your mobile device lets you communicate by voice and  
data—almost anywhere, anytime, wherever wireless service is  
available and safe conditions allow. When driving a car, driving is  
your first responsibility. If you choose to use your phone while  
driving, remember the following tips:  
Legal and Safety  
87  
     
Get to know your Motorola mobile device and its  
features such as speed dial and redial. If available,  
these features help you to place your call without taking  
your attention off the road.  
Do not engage in stressful or emotional  
conversations that may be distracting. Make people  
you are talking with aware you are driving and suspend  
conversations that can divert your attention away from the  
road.  
When available, use a handsfree  
device. If possible, add an additional  
layer of convenience to your phone with  
one of the many Motorola Original  
handsfree accessories available today.  
Use your mobile device to call for help. Dial 911 or  
other local emergency number in the case of fire, traffic  
accident, or medical emergencies (wherever wireless  
phone service is available).  
Position your mobile device within easy reach. Be  
able to access your phone without removing your eyes  
from the road. If you receive an incoming call at an  
inconvenient time, if possible, let your voice mail answer  
it for you.  
Use your mobile device to help others in  
emergencies. If you see an auto accident, crime in  
progress, or other serious emergency where lives are in  
danger, call 911 or other local emergency number  
(wherever wireless phone service is available), as you  
would want others to do for you.  
Let the person you are speaking with know you are  
driving; if necessary, suspend the call in heavy  
traffic or hazardous weather conditions. Rain, sleet,  
snow, ice, and even heavy traffic can be hazardous.  
Call roadside assistance or a special  
non-emergency wireless assistance number when  
necessary. If you see a broken-down vehicle posing no  
serious hazard, a broken traffic signal, a minor traffic  
accident where no one appears injured, or a vehicle you  
know to be stolen, call roadside assistance or other  
special non-emergency wireless number (wherever  
wireless phone service is available).  
Do not take notes or look up phone numbers while  
driving. Jotting down a “to do” list or going through your  
address book takes attention away from your primary  
responsibility, driving safely.  
Dial sensibly and assess the traffic; if possible,  
place calls when your car is not moving or before  
pulling into traffic. If you must make a call while  
moving, dial only a few numbers, check the road and your  
mirrors, then continue.  
Legal and Safety  
88  
www.motorola.com  
NNTN7813A  
@NNTN7813A@  
xxxxxxxx xx xx AUG/09  
Printed in USA  

Mr Coffee MP13 User Manual
LG Electronics MMBB0234601 User Manual
Hitachi TAGMASTORE MK 90RD011 25 User Manual
Hamilton Beach 42491 User Manual
Emerson CLD Analyzer Module NGA2000 User Manual
Elta 4224 User Manual
Dell CPI User Manual
Centon electronic DataStick Pro Plus DSPP2GB 001 User Manual
Bunn EASY POUR B2 User Manual
Alpine CVA 1003R User Manual