Motorola I576BLK SP User Manual

“Removing and Inserting the SIM Card” on page 9.

13. Antenna delivers the best receiption when fully

19. Direct Connect Button allows you to use Nextel Direct

Connect on your Nextel phone. (See “Making and

Answering Direct Connect Calls” on page 36.)

extended.

14. Smart Button (() anticipates the next action you are

likely to perform. For example, when you highlight

a menu item, you can press the Smart Button to

select it. You can also use the Smart Button to make

and end calls, navigate menus or exit applications

when your phone is closed.

20. External Display Screen provides information about

your phone’s status and options.

The use of wireless phones while driving may cause

distraction. Discontinue a call if you can’t concentrate

on driving. Additionally, the use of wireless devices

and their accessories may be prohibited or restricted

in certain area is. Always obey the laws and

Note

15. Speaker Button ()) lets you place or receive calls in

speaker mode. In standby mode, pressing the

speaker button turns Direct Connect speaker

mode on and off.

regulations on the use of these products.

Getting Started With Your Phone

16. Volume Button allows you to adjust the ringer

volume in standby mode (with the phone open) or

adjust the voice volume during a call. The volume

key can also be used to scroll up or down to

navigate through the different menu options.

To start using your i576 phone:

ⅷ Make sure your SIM card is in place.

ⅷ Charge the battery.

17. Messaging LED blinks when new messages are

ⅷ Turn on your phone.

received.

After you’ve completed these items, you are ready to

begin using your new phone.

18. Bluetooth LED glows solid while the device is pairing

to a Bluetooth accessory and blinks while

connected. The LED turns off when no Bluetooth

accessories are connected to the device.

Section 1B. Phone Basics

Removing and Inserting the SIM Card

Your SIM Card

To avoid losing information stored in your SIM

card, do not remove it from your phone

unless absolutely necessary.

Important

Locating the SIM Card

Your SIM (Subscriber Identity Module) card is a small

card inserted into the SIM card holder within your

phone behind the battery area.

To remove your SIM card:

1. With your phone powered off, remove the battery

door and battery. See “Removing the Battery” on

page 12.

If no SIM card came with your phone, contact Nextel

Customer Service at 1-800-639-6111.

Most users will never need to remove or insert the SIM

card. However, if you wish to, follow the instructions in

2. Lift the rubber flap directly above the SIM card

holder, and then with your fingernail, carefully slide

the SIM card out from under the edge.

The SIM card is designed for optimal

Contacts storage and feature use. For Nextel

SIM card compatibility information, visit

www.nextel.com/sim.

Important

In some cases, Contacts and Groups may not

be accessible if you move your SIM card to

another phone. Contacts and Groups created

with your i576 phone may not be readable by

an older iDEN SIM-based phone.

Using Your Phone’s Battery and Charger

Protect your SIM card as you would any delicate

object. Store it carefully.

Note

Use only Nextel-approved or Motorola-

approved batteries and chargers with your

phone. The failure to use a Nextel-approved or

Motorola-approved battery and charger may

increase the risk that your phone will overheat,

catch fire, or explode, resulting in serious

bodily injury, death, or property damage.

WARNING

To insert your SIM card:

1. With your phone powered off, remove the battery

door and battery. See “Removing the Battery” on

page 12.

2. Lift the rubber flap directly above the SIM card

holder, and then carefully slide the SIM card into

your phone, until it lies flat in the SIM card holder.

Nextel-approved and Motorola -approved batteries and

accessories can be found at Sprint Stores or through

Motorola. You may order online at www.nextel.com or by

calling1-866-866-7509.

Do not touch the gold-colored areas of your

SIM card.

Important

Battery Capacity

Your phone is equipped with a Lithium Ion (Li-Ion)

battery. It allows you to recharge your battery before it is

fully drained.

When the battery reaches 5% of its capacity, your

phone makes a sound and displays a message. When

there are approximately two minutes of talk time left, the

phone sounds an audible alert and then turns off.

2. Remove the battery cover from the back of the

phone

Long backlight settings, searching for service, vibrate

mode, browser use, and other variables may reduce

the battery’s talk and standby times.

Note

Tip

Watch your phone’s battery level indicator and

charge the battery before it runs out of power.

Installing the Battery

1. With your thumbs, press down on the battery cover

on the back of your phone and slide it up toward

the antenna to release it.

3. Insert the battery into the opening, making sure the

connectors align. Gently press down to secure the

battery.

4. Replace the battery cover and press down until

you hear a click.

Charging the Battery

Charge your battery as soon as possible so you can

begin using your phone.

Keeping track of your battery’s charge is important. If

your battery level becomes too low, your phone

automatically turns off, and you will lose any

information you were just working on. For a quick

check of your battery level, glance at the battery charge

indicator located on your display screen.

Removing the Battery

Always use a Nextel-approved or Motorola-approved

desktop charger, travel charger, or vehicle power

adapter to charge your battery.

1. Make sure the power is off so that you don’t lose

any stored numbers or messages.

2. Remove the battery cover and remove the battery

from the phone.

Do not handle a damaged or leaking Li-Ion

battery as you can be burned.

WARNING

With the approved Li-Ion battery, you can recharge the

battery before it becomes completely run down.

Using the Phone Charger

ᮣ

Plug the flat end of the charger into the phone’s

charger connector and the other end into an

electrical outlet.

Battery Use and Battery Safety

ⅷ Motorola recommends you always use Motorola-branded

batteries and chargers. The warranty does not cover

damage caused by non-Motorola batteries and/or

chargers.

Use of an unqualified battery or charger

may present a risk of fire, explosion, leakage,

or other hazard. Improper battery use, or

use of a damaged battery, may result in a

fire, explosion, or other hazard.

WARNING

ⅷ Battery usage by children should be supervised.

● Your display screen lets you know the battery

is charging.

● Both the battery icon and a text message

show the charging status.

ⅷ It is normal for battery life to decrease over time, and

for the battery to exhibit shorter runtime between

charges or require more frequent or longer charging

times.

Motorola mobile devices are designed to

work best with qualified batteries. If you see a

message on your display such as Invalid

Battery or Unable to Charge, take the

following steps:

Important

ⅷ Avoid damage to battery and mobile device. Do not

disassemble, open, crush, bend, deform, puncture,

shred, or submerge the battery or mobile device.

Avoid dropping the battery or mobile device,

especially on a hard surface. If your battery or mobile

device has been subjected to such damage, take

it to a Motorola Authorized Service Center before

using. Do not attempt to dry it with an appliance or

heat source, such as a hair dryer or microwave oven.

• Remove the battery and inspect it to

confirm that it bears a Motorola “Original

Equipment” hologram;

• If there is no hologram, the battery is not

a qualified battery;

• If there is a hologram, replace the battery

and retry charging it;

• If the message remains, contact a

Motorola Authorized Service Center.

ⅷ Use care when handling a charged battery — particularly

when placing it inside a pocket, purse, or other

container with metal objects. Contact with metal

objects (e.g., jewelry, keys, beaded chains) could

complete an electrical circuit (short circuit), causing

the battery to become very hot, which could cause

damage or injury.

ⅷ New batteries or batteries stored for a long time may

take more time to charge.

ⅷ Charging precautions: When charging your battery,

keep it near room temperature. Never expose

batteries to temperatures below 0°C (32°F) or above

45°C (113°F) when charging. Always take your

mobile device with you when you leave your vehicle.

ⅷ When storing your battery, keep it in a cool, dry

place.

Promptly dispose of used batteries in

accordance with local regulations. Contact your

local recycling center for proper battery

disposal.

Features of Your Phone

The i576 is easy to use, and reliable, and it offers many

features and service options. This list previews some of

those features and provides page numbers where you

can find out more:

Never dispose of batteries in a fire because

they may explode.

WARNING

ⅷ Nextel Direct Connect provides instant, coast-to-coast

2-way “walkie-talkie-style” communication at the

click of a button (page 36).

Turning Your Phone On and Off

Turning Your Phone On

ⅷ Nextel Direct Talk allows for two-way radio

communication “off the network” between two or

more phones equipped with this capability

(page 55).

ᮣ

Press and hold Pfor approximately two seconds.

As your phone connects to the network, you see a

connecting message. Your phone may require you to

enter identifying information to use it or to access

specific features.

ⅷ Text Messaging (also known as Multimedia

Messaging), provides quick and convenient

messaging capabilities (page 152).

Turning Your Phone Off

ⅷ Built-in Speakerphone allows you to enjoy easy

ᮣ

Press and hold Pfor two seconds until you see

the powering down animation on the display

screen.

hands-free communication.

ⅷ Games, ringers, screen savers, and otherapplications can

be downloaded to make your phone as unique as

you are (page 183). Additional charges may apply.

Your screen remains blank while your phone is off

(unless the battery is charging).

ⅷ Your Contacts list allows you to store up to 600

entries, with several numbers or addresses per entry

(page 98).

abc Battery Strength — A fuller battery indicates a

def greater charge.

ⅷ The built-in Datebook offers several personal

information management features to help you

manage your busy lifestyle (page 106).

Signal Strength — More bars next to the

antenna indicate a stronger signal.

opq

ⅷ The GPS Enabled feature works in connection with

available location-based services (page 1 18).

No Service — Your phone is without service.

You cannot make or receive any type of call.

ⅷ Word English Text Input lets you quickly type messages

with one keypress per letter (page 21).

ⅷ Bluetooth^®capability that allows you to wirelessly

connect to other Bluetooth enabled devices

(page 135).

Phone In Use — Your phone is active on a

phone call.

Direct Connect In Use — Your phone is active

on a Direct Connect call.

ⅷ Speed dial lets you dial phone numbers quickly

(page 35).

Group In Use — Your phone is active on a

Group Connect call.

Viewing the Status Information

Direct Talk — Your phone is off network and

set to Direct Talk mode.

Your phone’s display screen provides information

about your phone’s status and options. This list

identifies the symbols you’ll see on your phone’s

display screen:

Talkgroup In Use — Your phone is active on a

Talkgroup call.

“Temporarily Turning Off Transmissions

Bluetooth In Use — Your phone is using

Bluetooth. If this icon is blinking, then your

phone is in discoverable mode. If this icon is

static, your phone is active in a Bluetooth

connection.

Text Input — You are using one of the phone’s

text entry methods. See “Selecting a Text

Input Mode” on page 21.

QRS

TUV

Internet — You are ready to browse the

Internet or are browsing the Internet using a

secure connection. See “Data Services” on

page 180.

Active Phone Line — 1 indicates phone line 1

is ready to make calls; 2 indicates phone

line 2 is ready to make calls.

Call Forward — Your phone is set to forward

calls. See “Call Forwarding” on page 1 7 4 .

GLI

JHK

Transmitters — Your phone is set not to

receive calls and other transmissions. See

(Airplane Mode)” on page 73.

Ringer Off — Your phone is set to not ring.

See “Vibrate All” on page 6 7 .

Packet Data — You are ready to transfer

packet data or are transferring packet data.

See “Using Your Phone as a Modem” on

page 183.

Y Z

N O

Speaker Off — Direct Connect sound is set to

come through the earpiece rather than

through the speaker.

TTY — You are ready to use your phone to

make calls using a teletypewriter device.

See “Telecommunications Relay Service” on

page 1 7 7 .

Messages — You have one or more

messages. See “Message Center” on

page 1 4 8.

See “Using Y o ur Phone With a Hearing Aid

appears any time a context-sensitive menu is available.

Press M to access the menu

Hearing Aid — Your phone is set for use with a

hearing aid and is active on a phone call.

Device” on page 191.

When scrolling through the main menu, it may be

necessary to select More to view additional main

menu options. Depending on which menu view

you’re using, either highlight More and press ror

press More (right softkey).

Tip

Voice Record — You have one or more voice

records stored. See “Voice Records” on

page 126.

Selecting Menu Items

Navigating Through Phone Menus

and Options

As you navigate through the menu, menu options are

highlighted. Select an item by highlighting it and

pressing r.

For example, to view your text messages:

The navigation key on your phone lets you scroll

through menus quickly and easily.

1. Press M to access the main menu.

To navigate through a list-type menu, simply press your

navigation key up or down. The scroll bar at the right of

the menu keeps track of your position in the menu at

all times.

2. Select Messages by highlighting Messages and

pressing r.

3. Select Inbox by highlighting it and pressing r.

(If you have any text messages, they are displayed.)

For a diagram of your phone’s menu, please see “Your

Phone’s Menu” on page ii.

For the purposes of this guide, the above steps

condense into “Press > Messages > Inbox.”

Note

Many features provide context-sensitive menus that let

you access related features and actions. This icon S

read the text for a quick overview of the feature. For

more information, refer to this guide.

Backing Up Within a Menu

To go to the previous menu:

ᮣ

Press Back (right softkey).

To return to standby mode:

Press P.

Displaying Your Phone Number and

Direct Connect Number

ᮣ

My Info

Shortcuts and Personalized Keys

My Info lets you view your phone number, Direct

Connect number, and other phone information.

In standby mode, your phone gives you ways to quickly

access features you use frequently:

To view information about your phone:

ⅷ Use the Shortcuts feature (page 80) to quickly access

most menu options by pressing a number on your

keypad or saying the voice name of the shortcut.

1. Press

> My Info.

You may need to select More to display My Info.

Note

ⅷ Use the Personalize feature (page 62) to assign main

menu items to the navigation keys, softkeys, r, and

M, as well as setting a main menu item to appear

when your turn on your phone.

2. Press r.

3. Scroll to see your information:

Ⅲ My Name — You can enter your name here.

Help

Ⅲ Line 1 and Line 2 — your phone numbers for

phone lines 1 and 2. Each number appears when

you receive your alert notification after enabling

security on your phone.

Your phone contains an in-device help program to

help you understand complicated or seldom used

features. When you access a feature, Help sometimes

appears as a menu item or softkey. Select Help and

Ⅲ Direct Connect — the number that others use to

contact you using Nextel Direct Connect. This

number appears when you receive your alert

notification after enabling security on your phone.

Editing My Info

You can edit My Info to enter or change the text that

appears in My Name.

Ⅲ Group ID — the number of the Talkgroup you have

joined.

1. Press

> My Info.

2. Press Edit (left softkey).

Ⅲ Carrier IP — the IP address assigned to Nextel. This

number appears when you register for packet

data services.

3. Select Name.

4. Enter the name you want to appear. See “Entering

Text” on page 21. When you are finished, press r.

Ⅲ IP1 Address and IP2 Address — the IP addresses

you use to access the Internet with your phone.

You can also edit the information in Line 1 and Line 2,

but your changes are only temporary. The next time

your phone registers on the network, your actual phone

numbers appear again in My Info.

If you request equipment-related transactions on

your account, Nextel Customer Service may require

you to provide specific information about your

Note

phone. By pressing

anytime while in My Info, a

submenu will appear that includes your phone's

service status, unit information, and phone

identification numbers including IMEI, SIM ID, and

Serial Number (SN). Please be prepared to supply

the representative with this information when

requesting these types of transactions.

Section 1B. Phone Basics

Ⅲ Languages to change the language of the text

input database (See page 22).

Entering Text

Ⅲ Add QNotes to enter preset messages (See

page 23). (You can also access Quick Notes by

pressing Qnotes [left softkey] when beginning a

message.)

Selecting a Text Input Mode

Your phone provides convenient ways to enter letters,

numbers, and symbols whenever you are prompted to

enter text (for example, when adding a Contacts entry

or when composing text and multimedia messages).

When entering text, press the #(Shift) key to

Tip

change letter capitalization (ABC > Abc > abc).

To choose a text input mode:

Entering Text Using Word Text Input

1. At a screen requiring you to enter text, press M to

change the text input mode.

Word Text Input (T9) analyzes the letters on the keypad

buttons you press and arranges them to create words.

As you type, Word mode matches your keystrokes to

words in its database and displays the most commonly

used matching word. You can add your own words to

this database.

2. Select one of the following options:

Ⅲ Alpha to cycle through the alpha characters

associated with the letters on the keypad. (See

page 22.)

Ⅲ Word to enter text using a predictive text system

that reduces the number of key presses required

while entering a word. (See page 21.)

1. Select the Word text input mode.

2. Press the corresponding keys once per letter to

enter a word. (For example, to enter the word “Bill,”

press 2455.) (If you make a mistake, press

Delete [left softkey] to erase a single character.

Press and hold Delete [left softkey] to erase an

entire word.)

Ⅲ Symbols to enter punctuation and other symbols.

(See page 23.)

Ⅲ Numeric to enter numbers by pressing the

numbers on the keypad. (See page 23.)

3. If the word that appears is not the desired word,

press 0to change the word on the display to the

next most likely word in the database. Repeat until

the desired word appears.

To change the language of the database:

1. At a screen that requires you to enter text,

press M.

2. Select Languages.

Adding a Word to the Database

3. Select the language you want for your database.

If a word you want to enter is not displayed as an

option when you are using Word Text Input, add it to

the database.

Entering Text Using Alpha Mode

1. Select the Alpha mode. (See “Selecting a Text Input

Mode” on page 21.)

1. Select the Alpha text input mode. (See “Selecting a

Text Input Mode” on page 21.)

2. Press the corresponding keys repeatedly until the

correct letter appears. (For example, to enter the

word “Bill,” press 2twice, 4 three times, 5

three times, and 5three times again. If you make

a mistake, press Delete [left softkey] to erase a

single character. Press and hold Delete [left softkey]

to erase an entire word.)

2. Enter the word. (See “Entering Text Using Alpha

Mode” on page 22.)

3. Select the Word text input mode.

4. Press #.

The word will appear as an option the next time you

scroll through options during Word Text Input.

By default, the first letter of an entry is capitalized and

the following letters are lower cased. After a character

is entered, the cursor automatically advances to the

next space after two seconds or when you enter a

character on a different key.

For more information about Word Text Input, visit

www.nuance.com/T9/textinput/.

You cannot store alphanumeric combinations such

as Y2K

Note

Characters scroll in the following order:

Entering Symbols, Numbers, and Quick

Notes

English Sequence

Space . ? ! , @ & : ; “ - ( ) ‘ ¿ ¡ % £ $ ¥

A B C 2 Á Ã Â À Ç

D E F 3 É Ê È

G H I 4 Í Ì

J K L 5

Key

To enter symbols:

ABC

DEF

ᮣ

Select the Symbols mode. (See “Selecting a Text

Input Mode” on page 21.) To enter a symbol, press

the appropriate key indicated on the display.

GHI

JKL

To enter numbers:

MNO

PQRS

TUV

WXYZ

M N ñ O 6 Ó Õ Ô Ò

P Q R S 7 ß

T U V 8 Ú Ü Û Ù

ᮣ

Select the Numeric mode and press the appropriate

key. (See “Selecting a Text Input Mode” on

page 21.)

WXY Z 9

+ - 0 * / \ [ ] = > < # §

Space Shift Caps Lock

Back

To enter Quick Notes:

1. From a text entry screen, press QNotes (left softkey).

2. Select a message and press r.

To add a quick note after you have already started

entering a message, press M, select Add QNotes,

and select a message.

Tip

Quick Notes preset messages make composing text

messages easier by allowing you to enter quick

messages, such as “Meet me at,” “Let’s get lunch,” or

a customized message of your own.

Note

When none of these icons appear, letters typed are

lowercase. Scrolling up after typing a letter makes that

letter uppercase.

Special Function Keys

Some of the phone’s keys assume different functions

while in Alpha or Word mode.

When creating a text message, you may not be able

to make a letter uppercase by scrolling up,

depending on the type of text message and the text

entry mode.

Note

Spaces

Press # for a space.

Your phone automatically makes the first letter of a

sentence uppercase.

Capitalization

When you press and hold the #key, it acts as a

three-way toggle. Press and hold #to make the next

letter typed uppercase (shift), to make all subsequent

letters typed uppercase (caps lock), or to go back to

lowercase letters.

Punctuation

Press 1or 0to insert punctuation. Continue to press

the key to view the list of symbols available through that

key. Pause to select the symbol you want.

These icons appear:

Additional punctuation symbols are available in

Symbols mode.

Note

R or U Shift is on.

S or V

Caps lock is on.

Using a Remote Direct Connect Button

Accessories

If you are using a headset or other optional accessory

with a remote Direct Connect button, you can use the

remote Direct Connect button for phone calls, Direct

Connect calls, and Group Connect calls.

Your phone comes with the following accessories:

ⅷ A Li-Ion battery and charger.

ⅷ A 128K SIM card.

For phone calls, use the remote Direct Connect button

to answer calls, switch between calls, and end calls.

Hold the remote Direct Connect button for less than

two seconds to answer calls and switch between calls.

Hold the remote Direct Connect button for more than

two seconds to end calls.

Various accessories are available for use with your i576

phone, including cases, vehicle power chargers, data

cables, hands-free accessories, and more.

To order additional accessories, go to www.nextel.com

or call 1-866-866-7509. You can also contact your

Nextel Authorized Representative or stop by any Sprint

Store. For information on Sprint Store locations, go to

www.sprintstorelocator.com.

For Direct Connect calls and Group Connect calls, use

the remote Direct Connect button as you would the

Direct Connect button on your phone.

When using a headset, the Direct Connect button on

your phone works the same way as when you are not

using a headset. Direct Connect and Group Connect

sounds will be heard through the headset.

Making and Answering Phone Calls (page 29)

Section 2

Using Your Phone

Section 2A

Types of Calls

With the Nextel National Network, Nextel Direct

Connect, and your i576 phone, you have the following

traditional wireless phone and Nextel Direct Connect

services available to you:

Making and Answering Calls

ࡗ

Types of Calls (page 28)

Making and Answering Direct Connect Calls (page 36)

Making and Answering Group Connect Calls (page 39)

Nextel Direct Send (page 44)

ⅷ Digital Wireless Phone Calls offer clear calls and many

extra services, including missed call notification,

Three-Way Calling, speakerphone, and speed dialing

(page 29).

ⅷ Direct Connect Calls allow two-way radio

communication with other Nextel Direct Connect

users within the Nextel National Network (page 36).

Making and Answering Talkgroup Calls (page 51)

Call Alerts (page 53)

Making and Answering Direct Talk Calls (page 55)

ⅷ Group Connect Calls allow coast-to-coast two-way

radio calling to up to 20 Nextel Direct Connect

customers simultaneously (page 39).

Your i576 phone offers many different ways to connect to your

family, friends, and associates. In addition to traditional

wireless phone calls, you can make Nextel Direct

Connect calls to both individuals and groups,

participate in Talkgroups, use Nextel Direct Talk, and

send Call Alerts.

ⅷ Nextel Direct Send allows you to send contact

information about yourself and others in Nextel Direct

Connect calls and Nextel Group Connect calls and

send pictures in Nextel Direct Connect calls

(page 44).

“Difference Between Group Connect and Talkgroup

ⅷ Talkgroup Calls allow two-way radio calling to up to

100 Nextel Talkgroup customers simultaneously

(page 5 1).

3. Press N.

4. Press P when you are finished.

To redial your last outgoing call, press and hold N.

Tip

To learn more about the differences between Nextel

Group Connect calls and Talkgroup calls, please see

Calls” on page 51.

Note

You can also place calls from your phone by using

Voice Names (page 35), speed dialing numbers from

your Contacts (page 35), and using your Recent Call

list (page 34).

ⅷ Nextel Direct Talk allows for two-way radio

communication “off the network” between two or

more phones equipped with this capability

(page 53).

Answering Calls

1. Make sure your phone is on.

When your phone is off, calls go directly to voicemail.

Note

Making and Answering Phone Calls

2. Press N to answer an incoming call.

Making Calls

Depending on your settings, you may also answer

incoming calls by opening the phone, or pressing any

number key. See “Call Answer Mode” on page 82 for

more information.

Placing a traditional wireless phone call from your i576

is as easy as making a call from any landline phone.

1. Make sure your phone is on.

2. Enter a phone number from standby mode. (If you

make a mistake while dialing, press Delete [right

softkey] to erase the numbers.)

Missed Phone Calls

When the phone is closed, you can answer a call by

pressing

Tip

Missed phone calls are forwarded to voicemail. When

an incoming call is not answered, a Missed Call

notification is displayed on your screen.

To set the phone to answer and end calls by opening

and closing the phone, press M> Settings >

Phone Calls > Flip Activation and set Flip To Ans and

Flip To End to On.

To display the Missed Call entry from the notification screen:

ᮣ

Press View (left softkey). (To dial the phone number,

press N after displaying the call entry.)

Your phone notifies you of incoming calls in the

following ways:

ⅷ The phone rings or vibrates.

To display a Missed Call entry from standby mode:

ⅷ The indicator light flashes.

1. Press M > Recent Calls. (You may also be able to

press the navigation key down to display Recent

Calls.)

ⅷ The backlight illuminates.

ⅷ The screen displays an incoming call message.

2. Select the entry you wish to view and press r.

If the incoming call is from a number stored in your

Contacts, the entry’s name is displayed. The caller’s

phone number may also be displayed, if available.

Calling Emergency Numbers

Your phone supports emergency calling. Emergency

phone calls can be made even when your SIM card is

blocked or not in your phone.

Ending a Call

ᮣ

To end a call press P or close the phone.

ᮣ

Dial 911and press Nto be connected to an

emergency response center. If you are on an active

call, you must end it before calling 911.

Sending a Call to Voicemail

ᮣ

Press , press No (right softkey), or press the

Smart Button.

page 1 19 and “Making an Emergency Call” on

When you make an emergency call, your phone’s GPS

Enabled feature can help emergency service

personnel find you, if you are in a location where your

phone's GPS antenna has established a clear view of

the open sky and your local emergency response

center has the equipment to process location

information. See “GPS Enabled” on page 1 1 8, and

particularly “IMPORTANT: Things to Keep in Mind” on

page 120, for more information on the limitations of this

feature. Because of the limitations of this feature, always

provide your best knowledge of your location to the

emergency response center when you make an

emergency call.

Always report your location to the 911 operator

when placing an emergency call. Some

designated emergency call takers, known as

Public Safety Answering Points (PSAPs) may not

be equipped to receive GPS location information

from your phone.

Important

Emergency calls cannot be placed while the

keypad is locked.

If you have not registered on the network,

emergency calls cannot be placed while your

SIM card is in your phone.

If you are bringing your phone number to Nextel

from your previous carrier, you may receive a

temporary telephone number while your Nextel

phone is being programmed with your

permanent phone number. If you make a call to

911 and the call fails, the 911 emergency

response center will not be able to call you back

on your Nextel phone if in the meantime, your

Nextel phone has been programmed with your

permanent telephone number. If the call is

disconnected before location and details have

been provided, call 911 again and advise that you

were disconnected.

a Phone Number” on page 33.)

Press Spkr (right softkey) during a call to route the

phone’s audio through the speaker or the earpiece.

In-Call Options

Pressing Mduring a call displays a list of available

in-call features. To select an option, highlight the option

and press r. The following options may be available

through the Options menu:

Because of higher volume levels, do not

place the phone near your ear during

speakerphone use.

WARNING

Press Mute (left softkey) during a call to mute the

microphone. Press Unmute (left softkey) to unmute the

microphone.

ⅷ Hold to place the call on hold.

ⅷ 3 Way to initiate a three-way call.

ⅷ Use Bluetooth to switch from the phone’s microphone

to a Bluetooth device.

End-of-Call Options

ⅷ 2nd Call to place a second.

After you receive or make a call, the call duration is

briefly displayed. You are then automatically taken to

the Recent Calls list.

ⅷ Contacts to display your Contacts list.

ⅷ Recent Calls to display Recent Calls list.

ⅷ My Info to display your phone’s Information.

ⅷ Memo to display the phone’s electronic notepad.

ⅷ Datebook to enter a datebook event.

ⅷ Messages to create a message.

To save a number that is not in your contacts:

ᮣ

Highlight the entry you want to add to your

Contacts and press Save (left softkey). (See “Saving

ⅷ Store to store a new contact.

To view Call Details and Call Info:

1. Select a recent call.

ⅷ Record to record the phone call.

ⅷ GPS to enter the GPS application.

ⅷ In Call Setup to modify the in-call features.

2. Press r to view the Call Details.

3. Press r to view the Call Info.

After you receive a call from or make a call to a phone

number that is already in your Contacts, you are

automatically taken to the Recent Calls list. Highlight

the Recent Calls entry and press r to view the name

of the contact, the time the call was received or made,

and the call duration.

4. Enter or edit information as necessary. When you

are finished press Save (left softkey) to save the

Contact.

Finding a Phone Number

To find Contacts entries you can either scroll through

the list using your navigation key or you can search

Contacts entries by name.

The End-of-Call options are not displayed for calls

identified as No ID or Restricted.

Note

1. Press Contcs (left softkey).

Saving a Phone Number

2. Press Search (left softkey).

Your phone can store up to 10 phone numbers in each

of 600 Contacts entries. Each entry’s name can contain

20 characters. Your phone automatically sorts the

Contacts entries alphabetically. (For more information,

see “Contacts” on page 98.)

3. Enter the first few letters of a Contact's name and

press r. (The first contact entry that matches the

entered text will be highlighted.)

4. To display the Contacts entry, press r. To dial the

entry's default phone number, press N.

1. Enter a phone number and press M.

2. Select Store Number and press r.

Dialing and Saving Phone Numbers With

Pauses

3. To store the number as a new entry, select

[New Contact] and press r to add the new entry.

You can dial or save phone numbers with pauses for

use with automated systems, such as voicemail or

credit card billing numbers.

– or –

Search for an existing contact name and press r

to save the new number.

There are two types of pauses available on your phone:

Press M > Store Number to save the number in

your Contacts.

ⅷ Wait sends the next set of numbers when prompted.

ⅷ Pause automatically sends the next set of numbers

after three seconds.

When dialing a number with a wait, press Yes (left

softkey) to send the next set of numbers.

Note

You can have multiple pauses in a phone number

and combine waits and pauses.

Note

Dialing From the Contacts List

1. Press M > Contacts.

To dial or save phone numbers with pauses:

From standby mode, press Contacts (left

softkey) to list entries.

Shortcut

1. Enter the phone number.

2. Press and hold *until the letter P appears. The P

represents a three-second pause. If you want a

pause longer than three seconds, press and hold

* more than once. Each P represents a three-

second pause.

2. Highlight the entry you want to call and press Nto

dial the entry’s default phone number.

– or –

To dial another number from the entry, highlight

the name, press the navigation key right or left until

the correct number type appears, and then

press N.

– or –

Press and hold * until the letter W appears. The

W means your phone waits before dialing further. A

message appears asking if you want to send the

rest of the digits.

Making a Call From Recent Calls

If you have numbers stored in the Recent Calls list, you

can use these numbers to make calls. For information

on the Recent Calls list, see “Recent Calls” on page 92.

3. Enter additional numbers.

4. Press N to dial the number.

– or –

1. Press M > Recent Calls.

Using Speed Dialing

2. Select an entry and press N.

Each phone number stored in Contacts is assigned a

Speed Dial number, which you can use to call that

number. You can store up to 600 numbers in your

phone’s speed dial memory.

– or –

Press the Direct Connect button to make a Direct

Connect or Group Connect call.

To use speed dialing:

You cannot make calls from recent Calls to entries

identified as No ID or Restricted.

Note

1. Enter a speed dial number and then press #.

2. Press N to dial the number.

To use Turbo Dial^®for speed dial locations 1–9:

Making a Phone Call Using a Voice Name

If you have created a voice name in Contacts for the

number you want to call (see page 101), say the voice

name into your phone to enter the number.

ᮣ

Press and hold the appropriate key for

approximately two seconds. The display confirms

that the number has been dialed when it shows

“Calling...”.

1. Press and hold

until a prompt appears telling

you to say the voice name.

Redialing the Last Number

2. Speaking into the microphone, say the voice name

assigned to the number you want to call. Your

phone plays the name back to you.

ᮣ

Press and hold N.

3. The call is placed automatically.

To stop a phone call from being completed, press

P or (.

Tip

(See “Making and Answering Group Connect Calls”

Using Speakerphone

Making and Answering Direct

Connect Calls

Turning on speakerphone makes incoming sound

come out of the phone’s speaker instead of the

earpiece. Speakerphone is available whenever you are

on an active phone call.

Nextel offers the following Direct Connect services:

ⅷ Nationwide Direct Connect allows coast-to-coast Direct

Connect calling to Nextel subscribers to and from

anywhere on the Nextel National Network (U.S.).

To turn speakerphone on or off:

ᮣ

Press

or press Spkr (right softkey).

ⅷ International Direct Connect allows Direct Connect

calling to and from select countries.

Using Mute

ⅷ Group Connect allows nationwide Direct Connect

calling to up to 20 Nextel subscribers simultaneously.

on page 39).

Muting calls lets you listen to incoming sound without

transmitting sound. Mute is available whenever you are

on an active call.

To turn mute on:

ⅷ Talkgroups allows Direct Connect calling to up to 100

Nextel subscribers in the same Direct Connect

network. (See “Making and Answering Talkgroup

Calls” on page 5 1).

ᮣ

Press Mute (left softkey).

While mute is on, Unmute appears as the left softkey

option.

See www.nextel.com for more details on these Direct

Connect services. Pricing for each of these services is

based on your service contract.

To turn mute off:

ᮣ

Press Unmute (left softkey).

Making Direct Connect Calls

The number of digits in each part of a Direct

Connect number may vary. For example, your Direct

Connect number may be formatted as

999*999*9999, while another valid number may

appear as 555*555555*55.

Note

1. Enter the Direct Connect number you want to call.

(See “Dialing Nextel Direct Connect Numbers”

below.)

2. Press and hold the Direct Connect button on the

side of your phone. Begin talking after your phone

emits a chirping sound.

If you are calling or saving a Direct Connect number

for a Sprint phone with Direct Connect capabilities,

the Direct Connect number may be the same as the

wireless phone number. When saving the Direct

Connect number, insert asterisks in place of

hyphens (913*555*1234).

3. Release the Direct Connect button to listen.

A Direct Connect call ends automatically after there is

no activity on the call for several seconds.

When you store a Direct Connect number in

Contacts, be sure to include the entire number,

including the asterisks.

Tip

Dialing Nextel Direct Connect Numbers

Every Direct Connect number has three parts:

ⅷ An area ID.

Using Just the Member ID

If you are contacting someone sharing your network

and area IDs, you only need to enter the member ID

(the last part of the number).

ⅷ A network ID.

ⅷ A member ID.

An asterisk separates each part (for example:

999*999*9999). When you enter a number containing

all three parts, you must separate them with asterisks.

1. Enter the member ID of a Direct Connect number.

2. Press and hold the Direct Connect button on the

side of your phone. Continue as you would on any

Direct Connect call.

To make calls while viewing the details of an item on the

Recent Calls list:

Making Direct Connect Calls From Contacts

If you have numbers stored in Contacts, you can use

these numbers to make calls. For information on

entering numbers into Contacts, see “About Contacts”

on page 98.

1. From the Recent Calls list, select the item

containing the number you want to call. If you

scroll to My Info from another phone, you can make

a call to the Direct Connect number of the phone

that sent the information.

1. Press M > Contacts.

2. Scroll to the name or number you want to call.

2. Press and hold the Direct Connect button.

3. Press and hold the Direct Connect button on the

Making a Direct Connect Call Using a

Voice Name

side of your phone.

Your phone places the call to the Direct Connect

number stored in the Contacts entry, even if the Direct

Connect icon is not displayed.

If you have created a voice name in Contacts for the

number you want to call, say the voice name into your

phone to enter the number.

Making Direct Connect Calls From Recent Calls

1. Press and hold the Speaker Button (s) until a

prompt appears telling you to say the voice name.

If you have numbers stored in the Recent Calls list, you

can use these numbers to make calls. For information

on the Recent Calls list, see “Recent Calls” on page 92.

2. Speaking into the microphone, say the voice name

assigned to the number you want to call. Your

phone plays the name back to you.

1. Press M > Recent Calls.

2. Scroll to the item containing the Direct Connect

number you want to call.

3. Press and hold the Direct Connect button.

* Not all phones are Group Connect-compatible. See

Network. You can create a Group for one-time use or

store it to Contacts so you can call it at any time.

Answering Direct Connect Calls

When you receive a Direct Connect call, your phone

emits a tone or vibrates. You then hear the voice of

your caller.

www.nextel.com for more details on Group Connect.

In order to store Groups to your i576 phone, you

must use the 128K SIM card that came with your

phone. The 128K SIM card is labeled “Nextel 600

Contcs & 25 Grps”. With this SIM card, a maximum of

25 groups can be added to your i576 phone. Group

entries created with your i576 phone may not be

readable by older iDEN SIM-based phones.

Note

1. Wait for the caller to finish speaking.

2. Press and hold the Direct Connect button on the

side of your phone. Continue as you would on any

Direct Connect call.

3. Press P to end the call.

A Direct Connect call ends automatically after there is

no activity on the call for several seconds.

Making Group Connect Calls

1. From Contacts or the Recent Calls list, scroll to or

select the Group you want.

Making and Answering Group

Connect Calls

– or –

Press and hold s until a prompt appears telling

you to say the voice name. Say the voice name

assigned to the Group you want.

A Group Connect call is similar to a Direct Connect call

to one user, but is made to multiple Direct Connect

subscribers at once. You can create Groups from your

phone and call up to 20 other Group Connect-

– or –

Enter or select a Direct Connect number and add

more Direct Connect numbers. See “Starting a

compatible phones* anywhere on the Nextel National

Group Connect Call With a Direct Connect

Number” on page 4 1.

5. If you want to create a voice name for the Group,

select [Options] > Voice Name. As directed by the

screen prompts, say and repeat the voice name

you want to assign to the Group. Speak clearly into

the microphone. When you have finished, press

Back (right softkey).

2. Press the Direct Connect button.

Answering Group Connect Calls

ᮣ

Proceed as if answering a Direct Connect call from

one user. Only one person at a time may speak on

a Group Connect call.

6. Press Save (left softkey).

Adding Group Members

Creating Groups in Contacts

You can add Group members that have a Direct

Connect number and Group Connect-compatible

phone to your Group by selecting them from Contacts,

the Recent Calls list, Memo, or by manually entering

the Direct Connect number from your keypad. You can

also add all members in an existing Group to another

Group by selecting the Group name from Contacts.

1. Press M > Contacts.

2. Select [New Group].

3. If you want to assign a name to the Group, enter

the name.

If you do not assign a name, the Group is named

“Group” followed by the number of members in the

Group. For example, “Group (8)” for a group with

eight members.

Note

To add Group members from Contacts, the Recent Calls

list, or Memo:

1. While creating a Group, select [Add Member].

– or –

4. Add Group members. See “Adding Group

Members” on page 40.

Select [Add Number] and press Browse (left softkey).

Starting a Group Connect Call With a

Direct Connect Number

To move between Contacts, the Recent Calls list, and

Memo, scroll left or right, or press *or #.

Note

2. Scroll to the members you want from Contacts and

press r. To chose a number from the Recent

Calls list, or Memo, press M. A checkmark

appears next to each selected member.

1. Press M> Direct Connect, choose the Contacts

entries containing the Direct Connect numbers you

want in the Group Connect call, and go to step six.

(To add members or numbers from Recent Calls

or Memo, go to step four.)

To deselect a member, scroll to a selected member

and press r.

Note

– or –

From standby mode, enter the Direct Connect

number.

3. Press Done (left softkey) and then press Save (left

softkey) to save the group.

– or –

To add Group members manually from the keypad:

From Contacts or Recent Calls, scroll to an entry

containing the Direct Connect number.

1. While creating a Group, select [Add Number].

2. Enter the Direct Connect number using the

keypad.

2. Press M.

3. Select Call New Group.

3. Press r and then press Save (left softkey) to save

the group.

4. Add more Group members. See “Adding Group

Members” on page 40.

5. If you want to save the Group you have created,

To remove all members from a Group:

1. From Contacts, select a Group.

2. Press Edit (left softkey).

3. Press M.

press M and select Store Group.

– or –

If you do not want to save the Group, press

Done (left softkey).

4. Select Remove All.

6. To make the call, press the Direct Connect button.

Removing Members or Groups

To remove a member from a Group:

5. Press Yes (left softkey).

To delete a Group from Contacts:

1. From Contacts, highlight a Group.

2. Press M.

1. From Contacts, scroll to the Group you want to

delete the member from.

3. Select Delete Group.

2. Press Edit (left softkey).

3. Scroll to the member you want to remove.

4. Press M.

4. Press Yes (left softkey).

Storing Groups

5. Select Remove Member.

6. Press Save (left softkey).

To store a group to Contacts from the Recent Calls list:

1. From the Recent Calls list, select a Group.

2. Press Save (left softkey).

3. If you want, add more information to the entry.

4. Press Save (left softkey).

To store a group to Contacts from an active Group Connect

call:

To store a member from an active Group Connect call:

1. During an active Group Connect call, press M.

2. Press M.

1. During an active Group Connect call, press M.

2. Select Store Group.

3. Select Store Number.

3. If you want, add more information to the entry.

4. Select the number or member you want to store.

5. If you want, add more information to the entry.

You cannot record a voice name during an active

call.

Note

You cannot record a voice name during an active

call.

Note

4. Press Save (left softkey).

Storing Members of Groups

6. Press Save (left softkey).

To store a member from the Recent Calls list or within

Contacts:

Group Connect Call Information

While you are in a Group Connect call, the following

appears on the screen:

1. Display the Group containing the number or

member you want to store.

ⅷ The name of the Group.

2. Press M.

ⅷ The name or the Direct Connect number of the

person speaking.

3. Select Store Number.

ⅷ The number of members who are participating in the

Group Connect call.

4. Select the number or member you want to store.

5. If you want, add more information to the entry.

6. Press Save (left softkey).

Group Connect Call Details

Nextel Direct Send

During a Group Connect call, you can view details

about the other group members, such as their name or

Direct Connect number, and their status on the call.

Nextel Direct Send lets you exchange pictures, My Info,

contact information, and Groups with other phones that

have this capability. You do this through Direct Connect

calls.

To view Group Connect call details:

ᮣ

Press Details (left softkey).

Nextel Direct Send cannot be used during Talkgroup

calls. Pictures cannot be sent in Group Connect calls.

In the Details view, these icons appear next to member

names or Direct Connect numbers:

Sending a Picture

The member of the Group who is

speaking.

When you send a picture using Nextel Direct Send, the

picture you send appears on the display of the phone

you are engaged in the Direct Connect call with, and is

saved by that phone.

A member of the Group who is active on

the Group Connect call, but not speaking.

A member of the Group who has exited

the call.

Sending a Picture During a Call

You can send a picture at any time during a Direct

Connect call, whether you made or received the call*.

A member of the Group who could not be

reached on the Group Connect call.

* Additional charges may apply.

A member of the Group whose status is

unknown.

You cannot talk or listen on a Direct Connect call while

a picture is being transmitted. Other activities, such as

searching for a picture, do not prevent you from talking

or listening.

Starting a Call by Sending a Picture

You can start a call by choosing a stored picture from

the Media Center.

To do this, you must have the Direct Connect number

and IP address of the person you want to send to

stored in your Contacts.

To send a picture during a call:

1. While in a Direct Connect call, press Picture (right

softkey). A list of pictures that can be included in a

Direct Connect call appears.

When a person sends you My Info from his or her

phone, including his or her Direct Connect number

and IP address, you can then easily store this

information to Contacts from the Recent Calls list

Tip

2. Select the picture you want to send.

3. Press the Direct Connect button to send the

picture.

To start a call by sending a picture:

4. Wait while the picture is transmitted. The Direct

Connect call is temporarily interrupted while a

picture is transmitted.

1. Press M> Media Center and then scroll to or select

the picture you want to send in a Direct Connect

call.

5. When prompted, press the Direct Connect button

2. Press M.

to resume the Direct Connect call.

3. Select Send Via... > Send via PTT.

The first time you send a stored picture after turning

the phone on, the message Picture Fees May Apply

appears and you are prompted to respond. Press

Yes (left softkey) to send the picture. Press No (right

softkey) to not send the picture.

Note

4. Select A Contact or A Recent Call. These names have

Direct Connect numbers and IP addresses stored.

5. Select the name of the person you want to send

the picture to.

6. Press the Direct Connect button to send the

Accepting a Picture

picture.

1. When you see the message asking you if you want

to accept the picture, press Yes (left softkey).

7. Wait while the picture is transmitted. The Direct

Connect call is temporarily interrupted while a

picture is transmitted.

2. Wait while the picture is transmitted. The Direct

Connect call is temporarily interrupted while a

picture is transmitted.

8. When prompted, press the Direct Connect button

to resume the Direct Connect call.

3. When prompted, press the Direct Connect button

to resume the Direct Connect call.

Receiving a Picture

The first time you accept a stored picture after

turning the phone on, the message Messaging

Fees May Apply appears and you are prompted to

respond. Press Yes (left softkey) to accept the

picture. Press No (right softkey) to not accept the

picture.

When someone sends you a picture using Nextel

Direct Send, your phone emits a tone or vibrates and a

message appears on the display asking you if you

want to accept the picture.

Note

Pictures you receive are saved to your phone’s memory

and are accessible through the Media Center.

If you want to stop the transmission before it is

finished, press Cancel (right softkey).

Tip

When you receive a picture, it appears every time you

are in a Direct Connect call with the person who sent it

unless you delete the picture from the Media Center.

This occurs for the last 20 people who sent you

pictures.

Declining a Picture

ᮣ

When you see the message asking you if you want

to accept the picture, press No (right softkey).

The picture is not transmitted.

Sending My Info

Setting Picture Capability

You can control what portion of the information in My

Info is sent and whether it is sent automatically in every

Direct Connect call or only when you choose to send it.

To turn your phone’s ability to send and receive pictures in

Direct Connect calls on or off:

1. Press M > Settings > DC/GC Options >

On/Off Settings.

When you send My Info, certain information, such as

your email address or fax number, cannot be

included. To send complete contact information,

create an entry for yourself in Contacts and send it.

Tip

2. Select Pictures and press rto check or uncheck

the box.

3. Press Done (left softkey) to save the setting.

The information your phone sends always includes My

Name and Direct Connect.

This setting does not affect your phone’s ability to send

and receive My Info or contact information.

It may include Line 1, Line 2, and Carrier IP depending on

the options provided by your service provider and how

you set your sending options.

Sending My Info and Contact Information

When you send My Info or contact information using

Nextel Direct Send, the information you send appears

on the display of the phone you are engaged in the

Direct Connect call with. After the call, the information

appears on the Recent Call list of that phone.

The default setting is Line 1 only.

To change which fields are sent:

1. Press M > My Info.

2. Press M.

3. Select Direct Send Setup > Info To Send.

4. A checkmark appears next to the fields that will be

sent. To add or remove the checkmark, select the

field.

To start a call by sending My Info:

1. Press M > My Info.

2. Press M.

5. When you are finished, press Done (left softkey).

To control whether your information is sent automatically:

1. Press M > My Info.

3. With Direct Send My Info highlighted, press r.

4. Use the keypad to enter the Direct Connect

number you want to send the information to.

2. Press M.

– or –

3. Select Direct Send Setup > Auto Send.

Press Browse (left softkey). Select Contacts, Recent

Calls, or Memo. Select the number you want to

enter.

4. Select On to send your information automatically,

or Off to send your information only when you

choose to send it.

5. When Ready to Send appears on the display, press

the Direct Connect button to send the information.

When you receive your phone, it is set to send your

information automatically.

Note

Sending Contact Information

To send My Info during a call:

You can send contact information by selecting a

Contacts entry.

1. While in a Direct Connect call, press M.

2. With Direct Send My... highlighted, press r.

Contacts entries that contain only addresses cannot be

sent. When Contacts entries are received, they do not

include ring tones or pictures.

3. When Ready to Send appears on the display, press

the Direct Connect button to send the information.

To send contact information during a call:

1. While in a Direct Connect call, press M.

2. Select Contacts.

3. Use the keypad to enter the Direct Connect

number you want to send the contact to.

– or –

Press Browse (left softkey). Select Recent Calls,

Contacts, or Memo. Select the number you want to

enter.

3. Scroll to the Contacts entry you want to send and

select Send Via... > Send via PTT.

If the Contacts entry you scrolled to is a Group, you

4. When Ready to Send appears on the display, press

the Direct Connect button to send the contact

information.

Note

may be prompted to allow yourself to be a part of the

group being sent. Press Yes (left softkey) to become

part of the group.

Receiving My Info or Contact Information

4. When Ready to Send appears on the display, press

the Direct Connect button to send the contact

information.

When you receive My Info or contact information from

another phone, an icon appears on the display.

To start a call by sending contact information:

My Info

1. From Contacts, scroll to or select the entry you

want to send.

Contact Information

2. Press M and select Send Via... > Send via PTT.

To view the information while still in the Direct Connect call:

1. Press M.

If the Contacts entry you scrolled to is a Group, you

may be prompted to allow yourself to be a part of the

group being sent. Press Yes (left softkey) to become

part of the group.

Note

2. Select View Contact.

You can also view My Info from other phones on the

Recent Calls list. See “Recent Calls” on page 92.

Press Browse (left softkey). Select Contacts, Recent

Calls, or Memo. Select the number you want to

enter.

Sending Groups Using Direct Send

5. When Ready to Send appears on the display, press

the Direct Connect button to send the contact

information.

You can send a Group using Nextel Direct Send so that

the person who receives the Group can use the list.

To send a Group from the Recent Calls list:

To send a Group from Contacts:

1. From Recent Calls, scroll to the Group you want to

send and press M.

1. From Contacts, scroll to the Group you want to

send and press M.

2. Select Send Via... > Send via PTT.

2. Select Send Via....

3. To include yourself in the Group, press Yes (left

softkey). To exclude yourself, press No (right

softkey).

3. To include yourself in the Group, press Yes (left

softkey). To exclude yourself, press No (right

softkey).

If you choose to include yourself and the Group

already contains 20 members, you will be prompted

that the list is full. You will be excluded from the list.

If you choose to include yourself and the Group

already contains 20 members, you will be prompted

that the list is full. You will be excluded from the list.

Note

4. Use the keypad to enter the Direct Connect

number you want to send the contact to.

4. Select Send via PTT.

– or –

5. Use the keypad to enter the Direct Connect

Difference Between Group Connect and

Talkgroup Calls

number you want to send the contact to.

– or –

In a Group Connect call, you or another caller

determines who can participate in the call. By contrast,

participation in a Talkgroup is determined by an

administrator. Here are the ways Group Connect and

Talkgroup calls differ.

Press Browse (left softkey). Select Contacts, Recent

Calls, or Memo. Select the number you want to

enter.

6. When Ready to Send appears on the display, press

the Direct Connect button to send the contact

information.

Group

Talkgroup

The Group will display in the Recent Calls list on the

phone that you send the Group to.

Group Icons

Geography

Nationwide

Limited to local

market and network

(fleet)

Making and Answering Talkgroup

Calls

Maximum

Group Size

21 (including 100

originator)

Setup

Dynamically,

Predefined, via

A Talkgroup is a predetermined group of Direct

Connect users, created by an account administrator.

Talkgroups can contain up to 100 members.

via your phone Nextel administrator

using Talkgroup

Management

Voice Activated

Dialing

Yes

Joining a Talkgroup

Making Talkgroup Calls

To participate in a Talkgroup, the account administrator

must first add you to the membership and then you

must “join” the Talkgroup.

1. Press

and then enter the Talkgroup number

using the keypad.

– or –

1. Press Contacts (right softkey).

2. Scroll to the Talkgroup you want to join.

3. Press Join (left softkey).

Select the Talkgroup from Contacts or the Recent

Calls list.

2. Press the Direct Connect button and continue as if

making a Direct Connect call.

You can now receive communications from other

members of this Talkgroup.

Receiving Talkgroup Calls

You will hear all active Talkgroup conversations on your

phone. To silence them, press M > Settings >

DC/GC Options > Tkgrp Silent and then select On.

ᮣ

Answer it as you would a regular Direct Connect

call.

Only one person at a time may speak on a Talkgroup

call. The Direct Connect number or name of the person

who is speaking appears on the display screen below

the Talkgroup number.

Adding More Talkgroups

You can be included in additional Talkgroups by doing

one of the following:

During and immediately after a Talkgroup call ends,

press Options (right softkey). Your phone displays

actions you can take at this time.

ⅷ Using Talkgroup Management at www.nextel.com. You

must be an account administrator to use Talkgroup

Management.

ⅷ Contacting your Nextel Sales Representative at the

time of activation.

Responding to a Call Alert

Call Alerts

You can set a distinctive ringer for Call Alerts. See

“Ring Tones” on page 65.

Note

Sending a Call Alert lets the recipient know you want to

talk to him or her on a Nextel Direct Connect call. When

you send a Call Alert, the recipient’s phone alerts them

and displays your name or Direct Connect number.

To answer a Call Alert:

ᮣ

Press the Direct Connect button to make a Direct

Connect call to the sender.

Sending Call Alerts

To clear a Call Alert:

Press Clear (right softkey).

To store a Call Alert in the Call Alert queue:

1. Enter the Direct Connect number you want to send

the alert to.

ᮣ

2. Press Alert (left softkey).

3. When “Ready to Alert” appears, press the Direct

ᮣ

Press Queue (left softkey).

Connect button to send the Call Alert.

The Recent Calls list also stores Call Alerts you have

received. They appear as Direct Connect calls. Call

Alerts remain in your Recent Calls list until you delete

them or until they reach the end of the list.

Note

You can send a Call Alert from Recent Calls or

Contacts. Find the Direct Connect number you want

to send a Call Alert to and continue as explained

above.

Note

Responding to Call Alerts in the Queue

Using the Call Alert Queue

After you queue a Call Alert, you can respond to it by

making a Direct Connect call to the sender or sending

a Call Alert to the sender.

When you queue a Call Alert, it remains in the Call Alert

queue until you make a Direct Connect call to the

sender or delete it.

To make a Direct Connect call to the sender:

1. Press M > Call Alert.

Viewing Call Alerts

1. Press M > Call Alert.

2. Scroll through the list.

2. Scroll to the Call Alert you want to respond to.

3. Press the Direct Connect button to begin the call.

This removes the Call Alert from the queue.

To send a Call Alert to the sender:

Viewing Date and Time

To view the date and time a Call Alert was received:

1. Press M > Call Alert.

2. Select the Call Alert you want information on and

press r.

2. Scroll to the Call Alert you want to respond to.

3. Press Alert (left softkey). Ready to Alert appears on

the display.

4. Press the Direct Connect button until Alert

Successful appears on the display.

Deleting Call Alerts

Making and Answering

Direct TalkCalls

To delete a Call Alert from the queue:

1. From the Call Alert queue, scroll to the Call Alert

you want to delete.

Nextel Direct Talk allows for two-way radio

communication “off the network” between two or more

phones equipped with this capability. This feature is

very useful in areas without network coverage.

2. Press M.

3. Select Delete.

4. Press r or press Yes (left softkey) to confirm.

To delete all Call Alerts from the queue:

1. From the Call Alert queue, press M.

2. From the Call Alert menu, select Delete All.

3. Press r or press Yes (left softkey) to confirm.

You can make:

ⅷ Code calls – two-way radio calls conducted off the

network and using open channels and codes. In

these calls, anyone using your same channel and

code can hear your conversation.

ⅷ Private calls – two-way radio calls conducted off the

network and using the wireless phone numbers of

the participants. In these calls, others using the same

channel cannot listen in.

When using Direct Talk mode, the two phones should

be a minimum of six feet apart to maximize

performance and improve transmission range. You can

only make Direct Talk calls to users located within your

range. This varies according to terrain, man-made

structures, and atmospheric conditions.

The following features are not available while in Direct

Talk mode:

To return to network mode from Direct Talk:

1. Press > DT Options.

ⅷ On-network phone calls.

2. Select Exit Direct Talk.

ⅷ On-network Direct Connect, Group Connect,

After a few seconds, your phone returns to network

service.

Talkgroup calls, and Call Alerts.

ⅷ Data services.

ⅷ Sending and receiving messages.

ⅷ Call timer.

Code Direct Talk Calls

Your phone has 10 channels and 15 codes within each

channel. Channels represent the radio frequencies on

which you make and receive Nextel Direct Talk calls.

Codes allow you to minimize interference from others

using the same channel as you.

ⅷ Sending Call Alerts.

ⅷ Call forwarding.

Setting Your Phone to Direct Talk

To make Direct Talk Code calls, both parties must be

on the same channel and code and have their phones

set to Direct Talk. Be aware that others using both your

same code and channel can hear your conversation.

And, you can hear their conversations as well.

Before you and another caller can use Direct Talk, both

of your phones must be set to Direct Talk mode.

1. Press

> Direct Talk.

2. Select Go To Direct Talk.

To set a channel and code:

1. In Direct Talk mode, press Edit (left softkey).

2. Select Channel.

After a few seconds, your channel and code appear on

the display screen. Your phone displays the last

channel and code used for Direct Talk.

3. Select a channel.

4. Select Code.

code selected. Answer a Direct Talk Code call just like

you would any other Direct Connect call.

5. Select a code.

Private Direct Talk Calls

6. Press Back (right softkey) to return to the Direct Talk

standby screen.

Private Direct Talk allows you to silence all the calls on

a channel that are not directed specifically at you. To

do this, you must first set your phone to Private Only.

Making and Receiving Code Calls in Direct Talk

Mode

To set your phone to Private Only:

1. In Direct Talk mode, press Edit (left softkey).

2. Select Code.

To make a Code call using Direct Talk:

ᮣ

In Direct Talk mode, press and hold the Direct

Connect button. Your phone displays Transmitting,

along with the channel and code selected.

3. Select Pvt Only.

The tone emitted from your phone when making a

Direct Talk call is four beeps and sounds different from

the tone heard on Direct Connect calls conducted on

the network.

4. Press Back (right softkey) to return to the Direct Talk

standby screen.

To reach you, other Direct Talk callers must be on your

same channel and dial your ten-digit wireless phone

number to reach you.

If you receive an error message, this means:

ⅷ There may be no parties on your channel or code.

ⅷ You are out of range.

When you receive a Code call using Direct Talk, your

phone displays Receiving, along with the channel and

2. Make the call in the same way you make a regular

Direct Connect call. The number or name of the

person you are calling appears on your display

screen.

Receiving a Private Direct Talk Call

The number or name of the person who initiated the

call appears on your display screen. Answer the call in

the same way you answer a regular Direct Connect

call.

If you receive an error message, it means:

ⅷ You may not be using a valid wireless phone

number.

A Private Direct Talk call ends a short time after the last

party releases the Direct Connect button. The display

screen returns to Direct Talk standby mode.

ⅷ The person that you are trying to reach may not be in

Direct Talk mode.

You do not need to set your phone to Private Only to

receive Private calls. As long as you are on the same

channel as your caller, you can receive Private Direct

Talk calls.

Note

ⅷ The person that you are trying to reach is set to a

different channel, or is out of range.

Receiving All Calls on a Channel

Making a Private Direct Talk Call

You can set your phone to receive all Direct Talk

transmissions that are within range and set to the same

channel. Do this by selecting Receive All, instead of a

code.

You can make Private Direct Talk calls to any person on

your same channel. You do not need to set your phone

to Private Only.

However, you cannot initiate a call when the code is set

to Receive All. If you press the Direct Connect button to

initiate a Direct Connect call and your code is set to

Receive All, you receive an error message.

To make a private Direct Talk Call:

1. In Direct Talk mode, enter the ten-digit wireless

phone number of the person you want to call on

your channel. (You can also scroll to the number in

Contacts or Recent Calls list.)

To set the code to Receive All:

1. In Direct Talk mode, press Edit (left softkey).

2. Select Code.

3. Select Receive All.

4. Press Back (right softkey) to return to the Direct Talk

standby screen.

Making Emergency Calls While in Direct

Talk Mode

If you attempt to make an emergency 911 call while in

Direct Talk mode, your phone automatically exits Direct

Talk mode and attempts to find a network signal.

If you are out of network coverage, your phone cannot

make an emergency 911 call until you return to a

network coverage area. You must wait until the phone

reconnects to a network before attempting to make an

emergency 911 call.

Using the Settings Menu (page 60)

Section 2B

Using the Settings Menu

The Settings menu contains many submenus that let

you customize your phone.

Settings

To access the Settings menu and submenus:

1. Press M > Settings.

ࡗ

Sound Settings (page 65)

Display Settings (page 70)

Messaging Settings (page 71)

2. Select the submenu you want.

For information on applying groups of settings to your

phone together, see “Profiles” on page 76.

Temporarily Turning Off Transmissions (Airplane Mode)

(page 73)

Display/Info Features

ࡗ

Setting One Touch Direct Connect (page 7 4 )

Headset Options (page 75)

The Display/Info menu controls how the keypad and

display appear:

Profiles (page 76)

ⅷ Wallpaper — changes the wallpaper that appears on

the display screens.

Phone Setup Options (page 80)

You can customize your phone to sound, look, and operate just

the way you want it to. This section describes how to

change your phone’s settings to best suit your needs.

Take a few moments to review these options and to

adjust or add settings that are right for you.

ⅷ Text Size — sets the size of text on the display.

ⅷ Theme — changes the look of the display.

ⅷ Home Icons — controls whether main menu icons

appear in standby mode.

ⅷ Backlight — controls backlight illumination.

With a Hearing Aid Device” on page 191.

ⅷ Clock — controls whether the time and date appear in

standby mode; sets time and date format; sets year.

ⅷ Auto Ans — sets your phone to automatically answer

an incoming call after a specified number of rings.

When this feature is on, the phone answers by

connecting you to the caller; it does not send the call

to voicemail, unless you are out of coverage or on

the line.

ⅷ Menu View — controls whether the items on your main

menu and Java applications menu appear as large

icons or a list.

ⅷ Large Dialing — sets large digits to appear in standby

mode when you enter a number.

ⅷ Flip Activation — sets your phone to answer a call by

opening the phone or end a call by closing the

phone.

ⅷ Language — sets the language that your phone

displays.

ⅷ Minute Beep — causes a beep to sound every minute

of an active call.

Phone Calls Features

ⅷ Call Duration — causes the duration of a call to appear

on the display when the call ends.

The Phone Calls menu controls how your phone

handles phone calls:

ⅷ TTY — See “Telecommunications Relay Service” on

page 177.

ⅷ Set Line — sets phone line 1 or phone line 2 as the

active line for outgoing calls. If you are not

provisioned for a second line and you set your line to

line 2, you will not be able to make or receive calls.

ⅷ Hearing Aid — Supports the use of select Hearing Aid

devices. Set to Off, Microphone or Telecoil depending

on your Hearing Aid device. See “Using Your Phone

ⅷ Any Key Ans — lets you answer calls by pressing any

key on the keypad.

ⅷ Notifications — See “Message Notifications” on

page 149.

ⅷ Auto Redial — sets your phone to automatically redial

calls you make when the system is busy.

ⅷ DTMF Dialing — sets whether you can hear DTMF (dual

tone multi-frequency) tones with your keypad

ⅷ Call Waiting — See “Call Waiting” on page 1 72.

a Call by Sending a Picture” on page 45.

presses. Set to Always to always hear keypad

presses; set to Never to never hear keypad presses;

set to In Call Only to hear keypad presses only while in

a call.

ⅷ Store Rcvd Info — lets you specify a prefix, such as a

country code for international calls, to be

automatically added to phone numbers you receive

in My Info from other phones, when you store the My

Info to Contacts. Select Prefix to enter the prefix to be

added. Set Add Prefix to Ask Me to set your phone to

display a prompt asking you whether you want the

prefix added as you save My Info from other phones

to Contacts.

ⅷ Prepend — lets you specify a prefix, such as a country

code for international calls, to be automatically

added to phone numbers you dial.

DC/GC Options Features

ⅷ PTT Backlight — controls whether or not the backlight

displays when using Direct Connect.

The DC/GC Options menu controls how your phone

handles Direct Connect calls, Group Connect calls, and

Talkgroup calls:

Personalize Features

ⅷ Tkgrp Silent — controls whether you hear your

Talkgroup calls.

The Personalize menu makes main menu items easier

to access from standby mode.

ⅷ Tkgrp Area — lets you define your Talkgroup area.

ⅷ Menu Options — has two submenus to control menus:

ⅷ One Touch DC — sets One Touch Direct Connect.

Ⅲ Reorder Menu — lets you change the order of the

items on the main menu by grabbing and moving

them.

ⅷ Alert Type — controls how your phone notifies you

when you receive Direct Connect calls, Group

Connect calls, and Talkgroup calls.

Ⅲ

Add/Remove Apps — lets you create a shortcut to a

ⅷ On/Off Settings — sets your phone’s ability to send and

receive pictures in Direct Connect calls. See “Starting

Java application on the main menu.

ⅷ Up Key — sets the main menu item you access when

you scroll up in standby mode.

ⅷ Down Key — sets the main menu item you access

when you scroll down in standby mode.

Volume Features

The Volume menu sets the volume of sounds your

phone makes:

ⅷ Left Key — sets the main menu item you access when

you scroll left in standby mode.

ⅷ Line 1 — sets ringer volume for phone line 1.

ⅷ Right Key — sets the main menu item you access

when you scroll right in standby mode.

ⅷ Line 2 — sets ringer volume for phone line 2.

ⅷ Messages — sets the volume of message notifications

and Datebook reminders.

ⅷ Center Key — sets the main menu item you access

when you press r in standby mode.

ⅷ Earpiece — sets the volume of sound coming out of

the earpiece.

ⅷ Left Sftkey — sets the main menu item you access

when you press the left softkey in standby mode.

ⅷ Speaker — sets the volume of sound coming out of

the speaker.

ⅷ Right Sftkey — sets the main menu item you access

when you press the right softkey in standby mode.

ⅷ Keypad — sets the volume of sound associated with

pressing keys and buttons.

ⅷ Power Up — sets the main menu item you see when

you power on your phone. To set standby mode to

be the first thing you see when you power on your

phone, select Default Ready.

ⅷ Java Earpiece — sets the volume of sound associated

with Java applications coming out of the earpiece.

ⅷ Java Spkr — sets the volume of sound associated with

Java applications coming out of the speaker.

ⅷ Data — sets the volume of sounds that notify you that

you are receiving a circuit data call.

Security Features

Advanced Features

The Security menu lets you turn security features on and

off and change passwords:

The Advanced menu contains advanced Settings

features.

ⅷ Phone Lock — turns on a feature that locks your

phone: Lock Now takes effect immediately; Auto Lock

takes effect when your phone is powered off and

then on. An unlock code is required to enable this

feature, to unlock the phone, and to set a new unlock

code. Contact Nextel Customer Service for your

default unlock code.

ⅷ Alert Timeout — sets the amount of time a tone

continues to sound and the logo backlight continues

to flash when you receive a message notification,

Call Alert, or Datebook reminder.

ⅷ Headset/Spkr — sets headset options. See “Headset

Options” on page 75.

ⅷ Connectivity — Network ID sets the phone’s network IDs

and their roaming options under the direction of

Nextel Customer Service; Master Reset lets Nextel

Customer Service reset your service in the event of a

security or provisioning problem.

ⅷ Keypad Lock — locks the phone’s keypad, either

immediately or automatically after a set period of

inactivity.

ⅷ SIM PIN — enables and disables your phone’s SIM

PIN security feature. See “Turning SIM PIN On and

Off” on page 84.

ⅷ Reset Defaults — Reset Settings returns all settings to

their original defaults; Reset All returns all settings to

their original defaults and erases all stored lists. Use

only under the direction of Nextel Customer Service.

ⅷ GPS PIN — enables and disables your phone’s GPS

PIN security feature. See “Setting the GPS PIN

Security Feature” on page 89.

ⅷ Return to Home — After Phone controls how long the

Recent Calls list displays after phone calls; After DC

controls how long the Recent Calls list displays after

Direct Connect calls.

ⅷ Change Passwds — changes your phone unlock code,

security code, SIM PIN, and GPS PIN.

ⅷ Transmitters — controls your phone’s radio

transmitters. Selecting Off prevents your phone from

making or receiving phone calls, Direct Connect

calls, Group Connect calls, or Talkgroup calls, or

transferring data.

1. Press M> Ring Tones.

2. Scroll through the list of ring tones. A sample

ringer will sound as you highlight each option.

3. Press r or press Assign (left softkey).

ⅷ Baud Rate — sets the baud rate at which your phone

communicates with a laptop computer or similar

device.

4. Select the function(s) to which you want to assign

the current ringer by highlighting the option and

pressing r. (A check mark will appear next to

selected options).

Sound Settings

Ⅲ

Phone Line 1

Phone Line 2

Call Alert

Ring Tones

Voice Mail

Ringer types help you identify incoming calls and

messages. You can assign ringer types to individual

Contacts entries, types of calls, and types of messages.

Messages

Net Alert

Direct Send Alert

Reminders

Selecting Ringer Types

Your phone provides a variety of ringer options that

allow you to customize your ring and volume settings.

These options allow you to identify incoming calls by

the ring.

5. When you are finished, press Done (left softkey) to

assign the ringer to the selected function(s).

4. Scroll to view ring tones assigned to features and

Assigning a Ring Tone to a Contact

Contact entries.

You can also assign a ringer to a specific contact entry

so you know who's calling without looking at the

phone.

Downloading More Ring Tones

If you want to use other ring tones, you can download

them into your phone for a fee.

1. Press M> Ring Tones.

2. Scroll through the list of ring tones and select the

one you want to assign. A sample ringer will sound

as you highlight each option

Check the Downloads menu option on your phone for a

catalog of additional items available for purchase and

download directly from your phone. You can also

access downloadable ring tones from the Ring Tones

menu.

3. Press r or press Assign (left softkey).

4. Select A Contact....

To purchase and download new ringtones:

5. Highlight the Contacts entry to which you want to

assign the ring tone.

ᮣ

Press M > Ring Tones > Buy Ring Tones.

Ring tones may be downloaded only once. If you

delete a ring tone from your phone and wish to

reassign it, you must purchase it again.

Note

6. Press r to assign the ringer.

Viewing Ring Tone Assignments

1. Press M > Ring Tones.

2. Make sure Vibrate All is set to Off.

3. Highlight any ring tone and then

press M > Overview.

vendors will not charge you if you download an item

multiple times within a given time frame. Please contact

the DRM vendor to learn more about their download

regulations.

Managing Memory

To view the amount of memory available for custom ring

tones:

1. Press M > Ring Tones.

To delete a custom ring tone:

1. Press M > Ring Tones.

2. Make sure Vibrate All is set to Off.

3. Highlight any ring tone and press M >

Memory Usage.

2. Make sure Vibrate All is set to Off.

Vibrate Settings

Deleting custom ring tones frees memory.

Vibrate All

Ring tones are stored in your phone using the same

memory space used to store messages, voice

records, pictures, and Java application data that are

stored in your phone’s memory. Deleting or moving

some of these other items frees memory for ring

tones.

Note

The Vibrate All option allows you to be notified of calls

and messages with a vibration instead of an audible

alert.

To activate Vibrate All:

Deleting Custom Ring Tones

ᮣ

With the phone open, press and hold the volume

button down in standby mode. (Pressing and

holding displays “VibeAll: On.” Continuing to hold

the button down displays “VibeAll: Locked.”

Deleting a ring tone from the list of ring tones deletes it

from your phone.

Except for DRM ring tones, if you delete a ring tone that

you purchased from your phone, you will have to

purchase it again. Under certain conditions, some DRM

– or –

Press M> Ring Tones > Vibrate All. Set this option to

On or Locked.

Ring and Vibrate

Setting this option to Locked requires you to press

and hold the volume control up to turn Vibrate All off.

The Locked option helps prevent you from

accidentally turning Vibrate All off.

Tip

To set your phone to ring and vibrate when you receive

phone calls or Call Alerts:

1. Press M > Ring Tones.

To deactivate Vibrate All:

2. Make sure Vibrate All is set to Off.

1. Press and hold the volume key up to unlock

vibrate all.

3. Scroll through the list of ring tones and highlight

the one you want to assign.

2. Press the volume key up repeatedly to select a

volume level.

4. Press M > Assign w/Vibe.

– or –

5. Select Phone Line 1 and/or Phone Line 2 and press

Done (left softkey).

Press M > Ring Tones > Vibrate All. Set this option

to Off.

This icon S appears on the display.

These icons indicate how the ringer is set:

Silence All

The phone always vibrates instead of

making a sound.

The Silence All option allows you to mute all sounds

without turning your phone off.

The phone vibrates instead of making a

To activate Silence All:

sound for phone calls.

ᮣ

With the phone in standby mode press and hold

the volume key down until the ringer level is set

at 0. (The screen will display M.)

Direct Connect calls, Group Connect

calls, and Talkgroup calls are heard

through the earpiece, not the speaker.

To deactivate Silence All:

Adjusting the Phone’s Volume Settings

ᮣ

Press the volume key up repeatedly to select a

volume level.

Adjust your phone’s volume settings to suit your needs

and your environment.

To set your phone to vibrate instead of making a sound for

some features but not others:

1. Press M > Settings > Volume.

2. Select Line 1, Line 2, Messages, Earpiece, Speaker,

Keypad, Java Earpiece, Java Spkr or Data.

1. Press M > Ring Tones.

2. Make sureVibrate All is set to Off.

3. Select Vibrate from the list of ring tones.

3. Using the navigation key, choose a volume level

and press r.

You can adjust the ringer volume in standby mode

(or the earpiece volume during a call) by using the

volume key on the left side of your phone.

Tip

4. Select the features you want to set to make no

sound.

5. When you are finished, press Done (left softkey).

Minute Beep

To set ring options for Direct Connect calls, Group

Connect calls, and Talkgroup calls, see “Vibrate

Settings” on page 67.

Note

Set your phone to alert you with an audible tone once

a minute during a voice call.

1. Press M> Settings > Phone Calls > Minute Beep.

2. Highlight On or Off and press r.

2. Select Wallpaper and press r. (A list of available

images will be displayed.)

Display Settings

3. Select an image and press View (left softkey) to

view it. Press Back (right softkey) to return to the

available images.

Changing the Backlight Time Length

Select how long the display screen and keypad remain

backlit after any keypress is made.

4. Press r to assign an image.

1. Press M> Settings > Display/Info > Backlight.

Setting Wallpaper to Change Automatically

2. Highlight an option, press r, and then choose a

setting.

When you set your wallpaper to change automatically,

your phone uses each of the pictures inMedia Center as

wallpaper, cycling through them at a pace you choose.

Ⅲ For Timer or Java Timer, select a backlight timeout

time.

1. Press M> Settings > Display/Info > Wallpaper >

Auto Cycle.

Ⅲ For Sensor, PTT Backlight, Bluetooth, or Message,

select On or Off.

2. Select how often you want the wallpaper to

change.

Long backlight settings reduce the battery’s talk and

standby times.

Note

Changing the Phone’s Menu Style

Changing the Display Screen

Choose how your phone’s menu is displayed on the

screen.

Choose what you see on the display screen while

powering on or off and when in standby mode.

1. Press M> Settings > Display/Info > Menu View.

1. Press M > Settings > Display/Info > Wallpaper.

2. Select an option and press r.

Changing the Text Size

Ⅲ Icon View to view the main menu as a grid of

Icons. Icons animate when they are highlighted.

Adjust the font when entering text (for example, when

using the notepad or when adding a Contacts entry).

Ⅲ List View to display the menu as a list.

1. Press M> Settings > Display/Info > Text Size.

Changing the Theme

2. Select Zoom, Standard, or Compressed and

press r.

Customize your phone’s display appearance by

selecting a theme to reflect your personality.

Messaging Settings

1. Press M> Settings > Display/Info > Theme.

2. Select an option and press r.

Staying connected to your friends and family has never

been easier. With your phone’s advanced messaging

capabilities, you can send and receive many different

kinds of text messages without placing a voice call.

(For more information see “Multimedia Messages” on

page 152.)

Changing the Clock Display

Select a format for the time and date display and

choose whether the time and date appear in standby

mode.

1. Press M> Settings > Display/Info > Clock.

Messaging settings make text messaging easier by

letting you decide how you would like to be notified of

new messages, create a signature with each sent

message, and create your own preset messages.

2. Select Display, Time Format, or Date Format and then

press r.

3. Select an option and press rto apply the setting.

The year is set by the network, and even though it is

an option, it cannot be changed.

Note

To automatically delete read messages:

1. Press M> Messages > M> Setup > Cleanup.

2. Select Inbox or Sent Items and press r.

3. Choose a cleanup option.

Setting Message Notification

When you receive a message, your phone notifies you

by displaying an icon on your display screen. You can

also choose to be notified with a sound while making a

phone call.

4. To automatically delete messages now, press r

or press Yes (left softkey). Press No (left softkey) to

delete messages later.

1. Press M> Settings > Phone Calls > Notifications.

2. Select the and press r.

Ⅲ Receive All — Tones sound during calls for all types

of messages except MMS messages.

Adding a Customized Signature

Ⅲ Msg Mail Only — Tones sound during calls for SMS

messages; tones for all other types of messages

are held until you end calls.

Add a customized signature to each message you

send.

1. Press M> Messages > M> Setup > Signature. If you

do not wish to attach a signature to your outgoing

messages, press Delete (left softkey).

Ⅲ Delay All — Tones for all types of messages are

held until you end calls.

Delay All is the default setting.

Note

Tip

2. Enter a signature and press r. (See “Entering

Text” on page 21.)

To set notification options during a call press M>

In Call Setup > Notifications.

Managing Preset Messages

Your phone is loaded with two types of preset

messages, Quick Notes and Replies, to help make

sending text messages easier. You can also create

custom Quick Notes and Replies to suit your needs.

Deleting Old Messages

Delete messages you have read whenever you like, or

have your phone delete them automatically for you.

To add a new preset message:

To edit a custom Quick Note or Reply:

1. Press M> Messages > M> Setup > Quick Notes or

Replies. (The list of preset messages will be

displayed.)

ᮣ

From the Quick Notes or Replies list, select a

message, make your changes (see “Entering Text”

on page 21), and press r.

2. To add a new message, press New (left softkey) or

Temporarily Turning Off

select [New Quicknote].

Transmissions (Airplane Mode)

3. Enter your message (see “Entering Text” on

page 21), and press r. (Your new message will

be added to the end of the list.)

Sometimes you may want to have your phone on, but

turn off its ability to make and receive calls and other

transmissions.

To delete a custom Quick Note or Reply:

1. Press M> Messages > M > Setup > Quick Notes or

Replies. (The list of preset messages will be

displayed.)

To set your phone so that it cannot make or receive phone

calls, Direct Connect calls, Group Connect calls, Talkgroup

calls, or transfer data:

2. To delete a custom message, select it and press

Delete (left softkey).

1. Press M > Settings > Advanced > Transmitters.

2. Select Off and press r.

– or –

To delete all custom messages, select a custom

message and press M > Delete All.

3. Press Yes (left softkey).

When in Transmitters Off mode, your phone’s standby

screen displays “Transmitters Off.”

To set your phone to quickly make a Direct Connect call,

create an Group Connect list, or make a Group Connect

call:

While powering on your phone, you can turn

transmitters off by pressing Pfor more than five

seconds.

Note

1. Press M > Settings > DC/GC Options >

One Touch DC.

To restore your phone’s ability to do all these things:

2. Set this option to Quick PTT and press r.

To set your phone to call the most recent Direct Connect

number or Group on the Recent Calls list:

ᮣ

Set this option to On and then press Yes (left

softkey).

1. Press M > Settings > DC/GC Options >

When Transmitters is set to Off, your phone’s

Bluetooth capability is disabled, and all active

Bluetooth connections are dropped.

Note

One Touch DC.

2. Set this option to Last Call and press r.

To set your phone to call a Direct Connect number you

choose:

Setting One Touch Direct Connect

1. Press M > Settings > DC/GC Options >

One Touch Direct Connect sets your phone to call the

most recent Direct Connect number or Group on the

Recent Calls list, or a Direct Connect number you

choose, every time you press the Direct Connect

button.

One Touch DC > Assigned No.

2. Enter the Direct Connect number you want your

phone to call every time you press the Direct

Connect button.

Ⅲ Enter the number using your keypad.

– or –

Ⅲ Press Search (left softkey). Select Contacts, Recent

Calls, or Memo. Select the number you want to

enter.

To turn off One Touch Direct Connect:

1. Press M > Settings > DC/GC Options >

One Touch DC.

If you are entering a Talkgroup number, enter #

before the number.

Tip

2. Set this option to Off.

3. Press r.

Headset Options

To set your phone to send a picture:

To set your phone to send incoming sound to a headset

only, or to a headset and a speaker at the same time:

1. Press M > Settings > DC/GC Options >

One Touch DC.

1. Press M > Settings > Advanced > Headset/Spkr.

2. Set this option to Send Picture.

2. Select HdsetOnly to send incoming sound to the

To set your phone to send your phone’s information:

headset only.

1. Press M > Settings > DC/GC Options >

One Touch DC.

– or –

Select Hdset&Spkr to send incoming sound to the

headset and ring tones to the speaker.

2. Set this option to Send My Info.

To set your phone to send a contact:

1. Press M > Settings > DC/GC Options >

One Touch DC.

2. Set this option to Send Contact.

“Setting Call Filtering” on page 79.

Viewing Profiles

Profiles

To view the profiles stored in your phone:

A profile is a group of settings saved together so that

you can apply them to your phone easily.

1. Press M > Profiles.

2. Scroll to the profile you want to view.

3. Press View (left softkey).

A profile contains these settings:

ⅷ Ring Tones — sets all options described in “Ring

T o nes” on page 65, except assigning ring tones to

Contacts.

The profile that is currently in effect on your phone

has a checkmark next to it.

Tip

ⅷ Display/Info — sets Wallpaper, Theme, Text Size, and

Backlight options. See “Display Settings” on page 70.

4. Scroll to view settings.

ⅷ Phone Calls — sets Set Line and Auto Answer options.

See “Phone Calls Features” on page 61.

Switching Profiles

To apply a profile to your phone:

ⅷ Volume — sets all options described in “Volume

Features” on page 63.

1. Press M > Profiles.

ⅷ Call Filter — controls which calls, Call Alerts, and

message notifications your phone responds to. See

2. Scroll to the profile you want to apply and

press r.

The profile you selected is now in effect.

ⅷ Advanced — sets headset options. See “Headset

Options” on page 75.

Your phone arrives with preset profiles. You can also

create your own profiles.

How Changing Settings Affects Profiles

Temporary Profiles

Many of the settings contained in profiles can be set

without switching or editing profiles — for example, by

selecting Settings or Ring Tones to set options, or by

setting the volume of the phone’s ring using the

volume controls.

If your phone is set to create temporary profiles, a

temporary profile is created when you make changes

to settings without switching or editing profiles. These

stay in effect until you switch profiles or power off your

phone.

When you do this, your phone either:

Temporary profiles and any settings you have changed

are marked with asterisks (*).

ⅷ Updates the profile in effect to reflect these changes,

without notifying you.

Storing a Temporary Profile

To store a temporary profile as a new profile:

1. Press M > Profiles.

– or –

ⅷ Creates a temporary profile that contains these

changes.

To set your phone to create a temporary profile that contains

changes you make to settings:

2. Scroll to the temporary profile.

3. Press M.

1. Press M > Profiles.

4. Select Store As New.

2. Press M and then select Setup > Temp Profile.

3. Set this option to On.

5. Enter the name you want to give the profile. When

you are finished, press r.

To overwrite the profile the temporary profile is based on:

1. Press M > Profiles.

To set your phone to update the profile in effect to reflect any

changes you make to settings:

ᮣ

Set Temp Profile to Off in step 3 above.

2. Scroll to the temporary profile and then press M.

3. Select Store Changes.

The temporary profile is stored with the name of the

7. When you are finished, press Done (right softkey).

Note

Editing Profiles

profile it is based on. The profile it is based on, as it

existed before you made changes to settings, is

gone.

1. Press M> Profiles.

2. Scroll to the profile you want to edit.

3. Press M and then select Edit.

Creating Profiles

4. Scroll through the list of options and set their

1. Press M > Profiles.

values.

2. Select [New Profile].

5. When you are finished, press Done (right softkey).

– or –

Scroll to any profile, press M, and then select New.

Deleting Profiles

3. Enter the name you want to give the profile, and

To delete a profile:

then press r.

1. Press M > Profiles.

4. If you want to base this profile on an existing

profile, select Copy From and then select the profile

you want to base this profile on. If you do not

choose a profile to copy from, the new profile is

based on a default profile.

2. Scroll to the profile you want to delete.

3. Press Mand then select Delete.

4. Press r or press Yes (left softkey).

To delete all profiles:

5. Press Create (left softkey).

1. Press M> Profiles.

6. Scroll through the list of options and set their

values.

2. Press Mand then select Delete All.

3. Press r or press Yes (left softkey) to confirm.

Ⅲ DC/GC – sets filtering options for Direct Connect

calls and Talkgroup calls.

Setting Call Filtering

●

Off – sets your phone to notify you of all Direct

Connect calls and Talkgroup calls.

The call filtering setting in each profile lets you control

which calls, Call Alerts, and message notifications your

phone notifies you of, and which it ignores.

●

On – sets your phone to ignore all Direct

Connect calls and Talkgroup calls.

Ⅲ Group – sets filtering options for Group Connect

calls.

1. While setting options for a profile, select Call Filter.

2. Select a filtering option

●

Off – sets your phone to notify you of all Group

Ⅲ Phone – sets filtering options for phone calls.

Connect calls.

●

Off – sets your phone to notify you of all phone

●

On – sets your phone to ignore all Group

calls.

Connect calls.

●

All – sets your phone to ignore all phone calls.

Ⅲ Alerts – sets filtering options for Call Alerts.

All Contacts – sets your phone to notify you

only of phone calls from numbers stored in

Contacts.

●

Off – sets your phone to notify you of all

Call Alerts.

●

On – sets your phone to ignore all Call Alerts.

●

Some Cntcs – sets your phone to notify you

only of phone calls from specific Contacts

entries. Select up to five Contacts entries that

you want to be notified of calls from. When

you are finished, press Done (right softkey).

Ⅲ Notifications – sets filtering options for message

notifications.

●

Off – sets your phone to notify you of all

messages.

●

Voice Messages – sets your phone not to sound

a tone or vibrate when you receive voice

messages.

Creating a Shortcut

When you receive your phone, all number keys may

Note

already be assigned to shortcuts. If this is the case,

you can create new shortcuts by deleting or

replacing existing shortcuts

Text Messages – sets your phone not to sound

a tone or vibrate when you receive text

messages.

1. Go to the menu item you want to create a shortcut

for.

All – sets your phone not to sound a tone or

vibrate when you receive any message.

For example, if you want to create a shortcut to the

screen for creating a new Contacts entry:

Press M > Contacts, and then highlight

[New Contact].

When you receive a message you have set not to

sound a tone or vibrate, the message notification

screen still appears.

Note

3. Press Done (right softkey).

2. Press and hold M until a confirmation screen

appears.

Phone Setup Options

3. Press r or press Yes (left softkey).

4. Select Key.

Shortcuts

5. Press the number key you want to assign to the

shortcut and press r.

Your phone offers you the option of assigning shortcuts

to favorite or often-used functions. Pressing the Mkey

in standby mode followed by the assigned shortcut key

will launch your personally designated shortcuts.

6. If you want to record a voice name for the shortcut,

select Voice. As directed by the screen prompts,

say and repeat the name you want to assign to the

number. Speak clearly into the microphone.

7. Press Done (left softkey).

To access a shortcut if you do not know the shortcut

number:

8. If the number key you chose is already assigned to

a shortcut, a prompt appears asking if you want to

replace the existing shortcut.

1. Press M > Shortcuts.

2. Scroll to the shortcut you want to use and

press r.

Ⅲ Press Yes (left softkey) to replace the existing

shortcut.

Editing a Shortcut

Ⅲ Press No (right softkey) if you want to keep the

existing shortcut and assign another number key

to the shortcut.

To change the order of shortcuts:

1. Press M> Shortcuts.

Using a Shortcut

2. With any shortcut highlighted, press M.

To access a shortcut using the shortcut number:

1. From standby mode, press M.

3. Select Reorder and then scroll to the shortcut you

want to move.

2. On your keypad, press the number assigned to the

4. Press Grab (left softkey).

shortcut.

5. Scroll to the place where you want the shortcut to

appear.

To access a shortcut using the voice name:

6. Press Insert (left softkey).

1. Press and hold s.

7. Repeat step 4 through step 7 for all the items you

2. Say the voice name you assigned to the shortcut.

The shortcut with that voice name is then

highlighted.

want to move.

8. Press Done (right softkey).

To change the number or voice name assigned to a

shortcut:

3. Select Delete All.

4. Press r or press Yes (left softkey) to confirm.

1. Press M > Shortcuts.

2. Highlight any shortcut.

3. Press Edit (left softkey).

Call Answer Mode

Select how to answer incoming calls on your phone:

whether you want to be required to press N or to

press any number key.

4. With Key or Voice highlighted, press rto change

assignments.

1. Press M> Settings > Phone Calls.

5. Press Done (right softkey).

2. Select an option and press r.

Ⅲ Any Key Answer: Press r and selectOn to allow an

incoming call to be answered by pressing any

key.

Deleting Shortcuts

To delete a shortcut:

1. Press M> Shortcuts.

– or –

Select Off to require N to be pressed to answer

2. Scroll to the shortcut you want to delete.

3. Press M and then select Delete.

4. Press r or press Yes (left softkey) to confirm.

To delete all shortcuts:

all incoming calls.

Ⅲ Auto Ans to set your phone to automatically

answer an incoming call after a specified number

of rings.

●

Off to disable Auto-Answer.

1. Select M> Shortcuts.

●

1 Ring, 2 Rings, 3 Rings or4 Rings to answer calls

automatically when the phone is connected to

a hands-free car kit or a headset (sold

2. With any shortcut highlighted, press M.

separately). Remember, your phone will

answer calls in Auto-Answer mode even if you

are not present.

Setting Prepend Dialing

The Prepend feature lets you set a prefix to be added to

the beginning of all dialed numbers, such as a country

code for international calls.

Ⅲ Flip Activation to set your phone to answer calls by

opening the phone (Flip To Ans) and end calls by

closing the flip (Flip To End).

1. Press M> Settings > Phone Calls > Prepend.

●

Select Off to require N to be pressed to

answer all incoming calls, and to require Pto

be pressed to end all calls.

2. Select Prepend > On.

3. Enter a prefix in the Number field (such as +1 for

international calls) and then press r.

Display Language

Ⅲ To deactivate this feature, select Off during step 2

above.

You can choose to display your phone’s on screen

menus in English, Spanish, or French.

This setting does not apply to 911 or Sprint 411.

Note

1. Press M> Settings > Display/Info > Language.

2. Select English, Español, Français, or Automatic and

press r.

SIM Card Security (page 84)

Section 2C

SIM Card Security

Except for making emergency calls, your phone

does not function without the SIM card.

Important

Security

SIM Card’s PIN

ࡗ

Your Phone’s Lock Feature (page 86)

Your Phone’s Keypad Lock (page 86)

Resetting Your Phone (page 87)

You can protect access to your phone by using the SIM

card’s PIN (Personal Identification Number). When you

enable SIM PIN, you must enter the PIN each time you

power up the phone. You can change or disable the

SIM PIN.

GPS Privacy Options (page 88)

Java Applications & GPS Security (page 89)

Turning SIM PIN On and Off

By using the security settings on your phone, you receive peace

of mind without sacrificing flexibility. This section will

familiarize you with your phone’s security settings. With

several options available, you can customize your

phone to meet your personal needs.

1. Press

> Settings > Security > SIM PIN.

2. Select On or Off.

3. Enter the current SIM PIN.

The default SIM PIN is 0000. Change your PIN to

prevent fraudulent use of the SIM Card.

Important

4. Press Ok (left softkey).

Entering the PIN

Unblocking the PIN

1. Turn on your phone.

If you enter your PIN incorrectly three times, your SIM

card is blocked. To unblock your SIM card, you must

contact Nextel Customer Service to get a PIN Unblock

Code (PUK). Follow their instructions for unblocking

your SIM PIN.

2. When the SIM PIN screen appears, enter your

SIM PIN and press Ok (left softkey).

If you enter your PIN incorrectly three times, your

SIM card is blocked. See “Unblocking the PIN”

on page 85

Important

If you unsuccessfully enter the PUK code ten

times, your SIM card is permanently blocked and

must be replaced. If this happens, you get a

message to contact Nextel Customer Service.

Except for making emergency calls, your phone

does not function with a blocked SIM card.

Important

Changing the PIN

SIM PIN must be turned on in order to access this

feature.

Note

1. Press

SIM PIN.

> Settings > Security > Change Passwds >

2. Enter the current SIM PIN and press Ok (left

softkey).

3. Enter the new SIM PIN and press Ok (left softkey).

4. Reenter the new SIM PIN to confirm.

5. Press Ok (left softkey).

2. Select Unlock Code, and then enter your current

unlock code and press Ok (left softkey).

Your Phone’s Lock Feature

3. Enter and reenter your new lock code, pressing

Ok (left softkey) after each.

Locking Your Phone

When your phone is locked, you can only make calls to

911. To lock and unlock your phone, you must enter

your phone’s four-digit lock code. If you do not know

your phone’s lock code, try 0000; if this does not work

contact Nextel Customer Service for assistance.

Calling in Lock Mode

You can place calls to 911 when in lock mode.

ᮣ

To call an emergency number, dial 911 and

press N.

1. Press M> Settings > Security.

2. Select Phone Lock > Lock Now, enter the unlock

code, and press Ok (left softkey). (To set your

phone to lock the next time it is turned on, select

Auto Lock.)

Your Phone’s Keypad Lock

Locking the phone’s keypad prevents its buttons from

being pressed. When the keypad is locked, you can

only:

Unlocking Your Phone

ⅷ Power the phone on and off.

ᮣ

At the “Enter Unlock Code” prompt, enter your

ⅷ Unlock the keypad.

unlock code and press Ok (left softkey).

ⅷ Respond to incoming calls, messages, and alerts.

Changing the Lock Code

Emergency calls cannot be placed while the

keypad is locked.

Important

1. Press

> Settings > Security > Change Passwds.

Section 2C. Security

To lock the keypad:

From standby mode, press Mand then press *.

Resetting Your Phone

ᮣ

If you press a key while the keypad is locked,

instructions for unlocking the keypad display briefly.

Resetting Phone Settings

Resetting phone settings restores all the factory

defaults, including the ringer types and display settings.

The Contacts, History, Scheduler, and Messaging are

not affected.

To unlock the keypad:

ᮣ

From standby mode, press Mand then press *.

To automatically lock the keypad if there has been no activity

for a specified time.

1. Press

> Settings > Advanced > Reset Defaults >

Reset Settings.

1. Press M > Settings > Security > Keypad Lock.

2. Enter your phone’s six-digit security code and

press Ok (left softkey). (A disclaimer is displayed.)

2. To lock the keypad immediately, selectLock Now.

You will be given the option to press Mand *to

lock and unlock the keypad.

Your security code is a six-digit number used for

resetting your phone. Please contact Nextel

Customer Service if you do not know your security

code.

Note

3. To set a specific time for the keypad to lock if there

has been no activity, select Auto Lock and then

select a time.

3. Read the prompt and press Yes (left softkey) to

complete the reset. (Press No [right softkey] to

cancel.)

The keypad can be set to lock in 30 seconds or in 1, 5,

10, 15, or 20 minutes if the keypad is not touched

during the specified time. To turn the auto lock off,

repeat step 3 and select Off.

To set your GPS privacy options:

Resetting All

1. Press M > GPS > Privacy.

Selecting Reset All resets phone settings and clears all

phone data, including Contacts, History, Scheduler, and

Messaging.

2. If your GPS PIN security feature is enabled, enter

your GPS PIN. (See “Setting the GPS PIN Security

Feature” on page 89 for more information.)

1. Press

Reset All.

> Settings > Advanced > Reset Defaults >

3. Select the privacy option you want:

Ⅲ Restricted — No Java or similar software

applications may view the location of your phone.

However, location information may still be

available to the phone’s owner, fleet manager, or

account administrator.

2. Enter your security code and press Ok (left softkey).

3. Read the prompt and press Yes (left softkey) to

complete the reset. (Press No [right softkey] to

cancel.)

Ⅲ Unrestricted — All applications may view the

location of your phone, without notifying you.

GPS Privacy Options

Ⅲ Ask Access — When an application attempts to

view the location of your phone, you will be

prompted to give permission. However, location

information may still be available to the phone’s

owner, fleet manager, or account administrator.

Your phone’s GPS privacy options control whether Java

applications or other software applications on your

phone may view the location of your phone. You may

set your phone to one of these GPS privacy options.

Privacy options do not apply to the transmission of

location information during emergency 911 calls.

Note

Section 2C. Security

2. Enter the current GPS PIN and press Ok (left

softkey).

Setting the GPS PIN Security Feature

To prevent your GPS privacy settings from being

altered without your knowledge, your GPS privacy

option can be protected by a PIN.

3. Enter the new GPS PIN and press Ok (left softkey).

4. Reenter the new GPS PIN to confirm and then

press Ok (left softkey).

When you receive your phone, the GPS security feature

is turned off, so you do not have to enter a GPS PIN to

access your GPS privacy options. If you turn this

feature on, you will be required to enter a GPS PIN to

access your GPS privacy options.

Java Applications & GPS Security

Some Java applications can make use of your phone’s

GPS feature to determine the approximate

To turn the GPS Enabled security feature on or off:

geographical location of your phone. (See “GPS

Enabled” on page 1 18 for more information on the GPS

feature.) However, for privacy reasons, you may not

always want Java applications to access the location of

your phone. Your phone protects your privacy by giving

you the option to block all or some Java applications

from accessing the location of your phone.

1. Press

> Settings > Security > GPS PIN.

2. Select On or Off.

3. Enter the current GPS PIN.

The default GPS PIN is 0000.

Tip

4. Press Ok (left softkey).

To change your GPS PIN:

1. Press

GPS PIN.

> Settings > Security > Change Passwds >

individual Java application (see “Setting Privacy for

Each Java Application” on page 91).

Setting Privacy for All Java Applications

These options control the privacy of all Java

applications on your phone:

When a Java application requests access to the

location of your phone, a screen appears informing

you.

ⅷ Restricted — No Java or similar software applications

may access the location of your phone. However,

location information may still be available to the

phone’s owner, fleet manager, or account

administrator.

To deny this request:

1. Press Deny (right softkey). The application does not

access the location of your phone.

ⅷ Unrestricted — All Java applications may access the

location of your phone, without notifying you.

2. Select the denying option you want:

Ⅲ Always — If the application requests access to the

location of your phone again, the request is

denied without notifying you.

ⅷ By Permission — When a Java application attempts to

access the location of your phone, you are prompted

to give permission. However, location information

may still be available to the phone’s owner, fleet

manager, or account administrator.

Ⅲ For this session — If the application requests access

to the location of your phone again before you

power off your phone, the request is denied

without notifying you.

Granting or Denying Permission

Ⅲ Only Once — If the application requests access to

the location of your phone again, you are

prompted to grant or deny permission.

If you choose By Permission, you must grant or deny

each Java application access to the location of your

phone when the application requests access for the

first time. You may be required to grant or deny

subsequent requests from the same application,

depending on the privacy setting you choose for the

Section 2C. Security

To grant this request:

2. Scroll to the application or suite of applications you

want to set the privacy option for.

1. Press Grant (left softkey). The application accesses

your phone’s location.

If the application has requested access to the

location of your phone, this icon S appears when

you highlight the application.

Tip

2. Select the granting option you want:

Ⅲ Always — If the application requests access to the

location of your phone again, the request is

granted without notifying you.

3. Press M and then select Permissions.

4. Select the privacy options you want for this

application (you may set them for each of the

menus available under Permissions):

Ⅲ For this session — If the application requests access

to the location of your phone again before you

power off your phone, the request is granted

without notifying you.

Ⅲ Always — The application always has permission

to access the location of your phone, without

notifying you.

Ⅲ Only Once — If the application requests access to

the location of your phone again, you are

prompted to grant or deny permission.

Ⅲ Ask — When the application requests access to

the location of your phone, you are prompted to

grant or deny permission (see “Granting or

Denying Permission” on page 90).

Setting Privacy for Each Java Application

After a given Java application requests access to the

location of your phone for the first time, you have the

opportunity to set the GPS privacy option for that Java

application.

Ⅲ Never — When the application requests access to

the location of your phone, the request is denied

without notifying you.

1. Press M > Java Apps.

About Recent Calls (page 92)

Section 2D

About Recent Calls

The Recent Calls list displays the last 20 numbers (or

Contacts entries) for calls you placed, accepted, or

missed, and for Call Alerts you have received. It also

displays My Info and contact information sent to you

from other phones. It is continually updated as new

numbers are added to the beginning of the list and the

oldest entries are removed from the bottom of the list.

Recent Calls

ࡗ

Viewing Recent Calls (page 95)

Recent Calls Options (page 95)

Saving Items From Recent Calls (page 96)

Deleting Items From Recent Calls (page 96)

Prepending a Phone Number From Recent Calls (page 97)

Each entry contains the name assigned to the number

(if the phone number is in your Contacts) and the

Contacts type icon associated with the number. If the

Contacts entry containing the number has more than

one number or address stored, <> surrounds the

Contacts type icon. Duplicate calls (same number and

type of call) may only appear once on the list.

The Recent Calls list keeps track of incoming calls, outgoing

calls, and missed calls. This section guides you through

accessing and making the most of your Recent Calls

list.

The Direct Connect number Contacts type icon

appears when you receive a Direct Connect call or Call

Alert, even if the number is not stored in Contacts.

Call Alerts you have received appear as Direct Connect

calls. Like all items in the Recent Calls list, they remain

listed until you delete them or until they reach the end

of the list.

Section 2D. Recent Calls

When you select a call to view its details, you see

information such as the name associated with the call,

the number, date, time, and duration of the call.

The Direct Connect number Contacts type icon

appears when you receive a Direct Connect call or Call

Alert, even if the number is not stored in Contacts.

Call Alerts you have received appear as Direct Connect

calls. Like all items in the Recent Calls list, they remain

listed until you delete them or until they reach the end

of the list.

The Recent Calls list records only calls that occur

while the phone is turned on. If a call is received

while your phone is turned off, it will not be included

in the phone’s Recent Calls list.

Note

If you return a call from the voicemail menu, it will not

be included in your phone’s Recent Calls list.

For phone calls, an additional icon appears giving

information about the call.

Calls and Call Alerts

A call you made.

The Recent Calls list contains the numbers of up to 20

of the most recent calls you have made and received.

A call you received.

A missed call. Missed calls appear on the

Recent Calls list only if you have Caller ID.

If the number of a recent call is stored in Contacts, the

following information appears:

When you select a call to view its details, you see

information such as the name associated with the call,

the number, date, time, and duration of the call.

ⅷ The name assigned to the number.

ⅷ The Contacts type icon associated with the number.

If the Contacts entry containing the number has

more than one number or address stored, <>

surrounds the Contacts type icon. For information on

Contacts types, see “Contacts” on page 98.

My Info From Other Phones

The Recent Calls list displays My Info sent from other

phones. See “Sending My Info and Contact

Information” on page 47.

Section 2D . Recent Calls

This icon j appears with My Info sent from other

phones on the Recent Calls list, along with the Direct

Connect number of the person who sent the

information.

item contains more than one number or address

stored, <> surrounds the Contacts type icon.

The name or Direct Connect number of the person

who sent the contact information appears as a

separate item on the Recent Calls list, above the

information sent. If one person sends you more than

one item of contact information, all the items appear

below the person’s name or Direct Connect number.

When you select My Info from other phones to view its

details, you see all the information sent.

If you receive My Info from the same phone more than

once, only the most recently sent version appears in

the Recent Calls list.

When you select contact information to view its details,

you see the name or Direct Connect number of the

person who sent the information and all the information

in the item.

Contact Information From Other Phones

The Recent Calls list displays contact information sent

from other phones. This information comes from the

other phone’s Contacts list or Recent Calls list. See

“Sending My Info and Contact Information” on

page 47.

If you receive contact information with the same name

from the same phone more than once, only the most

recently sent version appears in the Recent Calls list.

This icon d appears with contact information on the

Recent Calls list.

Contact information in the Recent Calls list displays:

ⅷ The name contained in the contact information.

ⅷ The Contacts type icon associated with the number

or address contained in the contact information. If the

Section 2D. Recent Calls

already in your Contacts). Press Mto display the

following options:

Viewing Recent Calls

ⅷ Use Push To... to select Send Picture, Send My Info or Send

Contact (Direct Connect or Call Alerts only).

The Recent Calls list records only calls that occur

Note

while the phone is turned on. If a call is received

while your phone is turned off, it will not be included

in the phone’s Recent Calls list.

ⅷ Send Contact to send the contact information to

another Direct Connect user.

ⅷ Update Contacts to store the number to an existing

contact.

If you return a call from the voicemail menu, it will not

be included in your phone’s Recent Calls list.

ⅷ Delete to delete the entry.

To view the Recent Calls list:

1. Press M > Recent Calls.

2. Scroll through the list.

ⅷ Delete All to delete all recent calls entries.

ⅷ Add Prepend to prepend a number to the contact

number. See “Prepending a Phone Number From

Recent Calls” on page 9 7 .

To view the details of an item on the list:

ⅷ Call Alert Queue to view the call alert list.

ⅷ Call Setup to configure the call.

ᮣ

From the Recent Calls list, highlight an entry and

press r.

ⅷ Call New Group to create a Group and place a Group

Connect call. (Direct Connect or Call Alerts only.)

Recent Calls Options

ⅷ Create to send a multimedia (text) message to the

contact.

Select a Recent Calls entry and press rto display the

date and time of the call, the phone number (if

available), and the caller’s name (if the number is

You can also view the next Recent Calls entry by

pressing the navigation key right or view the previous

entry by pressing the navigation key left.

Tip

Section 2D . Recent Calls

4. If the item you want to store is a call, you must

assign a Contacts type to the number:

Saving Items From Recent Calls

With the Contacts type field highlighted, scroll left

or right to display the Contacts type you want to

assign the number.

1. From the Recent Calls list, scroll to or select the

item you want to store.

2. Press Save (left softkey).

5. If you want to add more information to the entry,

follow the applicable instructions in “Contacts” on

page 98.

– or –

If Save is not one of your options, press M and

then select Save or Update Contacts.

6. Press Save (left softkey).

If the item you want to store is a call, Save does not

appear if the number is already stored in Contacts.

Tip

Deleting Items From Recent Calls

To delete an item from the Recent Calls list:

3. Select [New Contact] to create a new Contacts entry

for the number

– or –

1. From the Recent Calls list, scroll to or select the

item you want to delete.

To store the number to an existing entry, select the

entry.

2. Press M and select Delete.

3. Press or rpress Yes (left softkey) to confirm.

To delete all items on the Recent calls list:

1. Press M> Recent Calls > M.

2. Select Delete All.

Storing My Info or contact information from another

phone to a Contacts entry that has a name assigned

to it does not change the name of the Contacts

entry.

Note

Section 2D. Recent Calls

3. If you are certain you want to erase all Recent calls,

press Yes (left softkey). Press No (right softkey) to

cancel.

Prepending a Phone Number From

Recent Calls

If you need to make a call from the Recent Calls List

and you are outside your local area code, you can add

the appropriate prefix by prepending the number.

1. Select a Recent Calls entry and press M >

Add Prepend.

2. Enter the prefix and press N to call the number.

Section 2D . Recent Calls

Section 2E

About Contacts

Contacts stores up to 600 numbers or addresses. Each

Contacts entry can store several numbers or

addresses.

Contacts

ࡗ

About Contacts (page 98)

Information stored in Contacts is saved on your

SIM card.

Creating Contacts Entries (page 99)

Viewing Contacts (page 102)

A Contacts entry contains:

Adding a Number or Address to an Entry (page 103)

Editing Entries (page 103)

ⅷ A name — A name is required if you are storing more

than one number or address to the entry; otherwise,

it is optional. Typically, this is the name of the person

whose contact information is stored in the entry.

Deleting Entries (page 103)

Assigning Speed Dial Numbers (page 104)

Selecting a Ringer Type for an Entry (page 105)

Checking Capacity (page 105)

ⅷ A ring tone — You can assign a ring tone to each

entry. This is the sound your phone makes when you

receive phone calls or call alerts from any of the

numbers stored in the entry.

Dialing Nextel Customer Service (page 105)

Your phone’s Contacts list helps you stay in touch with family,

friends, and colleagues by keeping track of all their contact

information. This section explains how to use your

phone’s Contacts list.

ⅷ A Contacts type — Each number or address stored

must be assigned a Contacts type. (See “Types of

Contacts” on page 99.)

Types of Contacts

Creating Contacts Entries

Each number or address stored must be assigned a

Contacts type:

Your phone can store up to 600 Contacts entries. Each

contact entry can store up to 10 numbers or addresses,

and each entry’s name can contain 20 characters.

Mobile

phone number

Direct Connect number

phone number

email address

phone number

Talkgroup number

Group

ICE – In Case of Emergency

Tip

To make it easier for emergency personnel to identify

important contacts, you can list your local

emergency contacts under “ICE” in your phone’s

Contacts list. For example, if your mother is your

primary emergency contact, list her as “ICE–Mom” in

your Contacts list. To list more than one emergency

contact, use “ICE1–___,” “ICE2–___,” etc.

Work1

Work2

Home

Fax

A number or address and a Contacts type are required

for all Contacts entries. Other information is optional.

You may enter the information in any order by scrolling

through the entry details.

Pager

Talkgroup

Group

After you have entered the number or address,

Contacts type, and any other information you want, you

can press Save (left softkey) to save the entry to

Contacts.

IP address

(

Other

phone number

To cancel a Contacts entry at any time press Cancel

(right softkey) and then press Yes (left softkey) to return

to the Contacts list or press Pto return to standby

mode.

5. To store a number or address:

Ⅲ Select the # field (or ID for an email address, or IP

for an IP address).

To create a Contacts entry:

Ⅲ Enter the number or address. For phone

numbers, use the ten-digit format. For Direct

Connect numbers, be sure to include the

asterisks (*).

1. Press M> Contacts > [New Contact].

– or –

Press M > Contacts > M> New Contact.

Ⅲ For email addresses, see “Entering Text” on

page 21.

2. If you want to assign a name to the entry:

Ⅲ Select Name. Enter the name. When you are

finished, press r.

Ⅲ When you are finished, press r.

6. If you want to assign more options to the number,

including Speed # and Voice Name, select [Options]

and proceed to steps 7-9. Otherwise, skip to

step 10.

3. If you want to assign a ring tone to the name:

Ⅲ Select Ringer. Select the ring tone you want to

assign.

4. To assign a Contacts type to the number or

7. The default Speed Dial number assigned to a

phone number is displayed in the Speed # field.

This is always the next available Speed Dial

location. If you want to assign the phone number

to a different Speed Dial location:

address being stored:

Ⅲ Select the Contacts type field.

Ⅲ Select the Contacts type you want to assign.

(Mobile, DC, Work1, Work2, Home, Email, Fax, Pager,

Talkgroup, Group, IP, or Other.)

Ⅲ With the Speed # field highlighted, press r.

Ⅲ Press Delete (right softkey) to delete the current

Speed Dial number.

100

and Saving Phone Numbers With Pauses” on page 33.

Ⅲ Enter the new Speed Dial number using the

keypad.

dialing further. A wait makes your phone wait for your

response before dialing further.

Ⅲ When you are finished, press r.

This feature is useful when using voicemail or other

automated phone systems that require you to dial a

phone number and then enter an access number.

8. If you want to create a voice name for a phone

number, select Voice Name. As directed by the

screen prompts, record the name you want to

assign to the number. Speak clearly into the

microphone.

For details on using pauses and waits, see “Dialing

Storing Numbers Faster

9. When you are finished, press Back (right softkey).

To store numbers to Contacts from standby mode:

10. If you want to add more numbers or addresses to

the entry:

1. Use the keypad to enter the number you want to

store.

Ⅲ Scroll past the information you already entered.

Ⅲ Enter the additional information for the entry using

step 2 through step 6. You must assign a name to

the entry, if you have not already.

2. Press M and then select Store Number.

3. To store the number as a new entry, select

[New Contact].

11. Press Save (left softkey).

– or –

Creating Pauses and Waits

To store the number to an existing entry, select the

entry.

When storing a number, you can program your phone

to pause or wait between digits while dialing. A pause

makes your phone pause for three seconds before

4. With the Contacts type field highlighted, scroll left

or right to display the Contacts type you want to

assign the number.

Contacts Entries” on page 99.

101

5. If you want to add more information to the entry,

follow the applicable instructions in “Creating

3. Press rto display the entry, and then scroll up or

down to view all information stored for the entry.

To view more entries, continue scrolling.

Tip

6. Press Save (left softkey).

Showing Only Direct Connect Numbers,

Groups, and Talkgroups

Viewing Contacts

To set Contacts to show only entries that contain Direct

Connect numbers, Groups, and Talkgroups:

1. Press M > Contacts, and then either scroll to the

entry you want to view.

1. Press M > Contacts, and then press M.

2. Select Filter > Show DC.

– or –

Enter the first letter of a name (such as “d” for

“Dave”).

To set Contacts to show all entries:

1. Press M > Contacts, and then press M.

2. Select Filter > Show All.

– or –

Press Search (left softkey), and enter the name you

want to see. (Your phone finds the name you

entered or the nearest match.)

Finding Speed Dial Numbers

2. If an entry has more than one number or address

stored, <> surrounds the Contacts type icon. Scroll

left or right to view the icon for each number stored

in the entry.

ᮣ

Press M>Contacts and select an entry. The speed

Dial Number will be listed directly under the

contact phone number.

From Contacts, press Search (left softkey) to display

the Search feature.

Tip

102

Adding a Number or Address to an Editing Entries

Entry

1. Press M> Contacts and scroll to the entry you

want to edit.

1. Display a Contacts entry. (See “Viewing Contacts”

on page 102.)

2. Press Edit (left softkey).

– or –

2. Press M > Edit.

If Edit is not one of your options, press Mand then

select Edit.

3. Scroll to the number type field above an open

number and press the navigation key right or left to

select a number type.

3. Follow the applicable instructions in “Creating

Contacts Entries” on page 99 to edit the various

fields.

4. Scroll down to the open field, enter the new phone

number or address, and press r.

5. Press Save (left softkey) to save the new number.

Deleting Entries

– or –

To assign a speed dial number, select [Options] >

Speed #, enter a speed dial number and press r.

Press Back (right softkey) and then press

Save (left softkey) to save the entry.

1. Press M> Contacts and scroll to the entry you

want to delete.

2. Press M.

3. To delete the entire entry, select Delete Contact.

4. Press r or press Yes (left softkey) to confirm.

page 99 or “Adding a Number or Address to an

103

number to an existing entry, or when you edit an

existing number.

Deleting a Number or Address

1. Press M> Contacts and scroll to the entry

containing the number or address you want to

delete.

To assign a speed dial number to a new phone number:

1. Add a phone number to a new or to an existing

Contacts entry. (See “Creating Contacts Entries” on

Entry” on page 103.)

2. Scroll left or right to display the Contacts type for

the number you want to delete.

3. Press M.

2. Highlight [Options], press r, and then select

Speed #.

4. Select Delete Number.

5. Press r or press Yes (left softkey) to confirm.

3. Enter an available speed dial number and

press r.

If an entry contains only one number or address,

deleting the number or address deletes the entry.

Note

4. Press Back (right softkey) to return to the Contacts

menu and then press Save (left softkey) to save the

entry.

Assigning Speed Dial Numbers

To assign a speed dial number to an existing phone

number:

Your phone can store up to 600 phone numbers in

speed dial locations. (For details on how to make calls

using speed dial numbers, see “Using Speed Dialing”

on page 35.)

1. Press M> Contacts and then scroll to an entry.

2. Press Edit (left softkey) or press M> Edit to display

the Edit Entry menu.

You can assign speed dial numbers when you add a

new Contacts entry, when you add a new phone

3. Select [Options] below the number you want to

assign, and then select Speed #.

104

4. Enter an available speed dial number and

press r.

4. Scroll through available ringers. (When you

highlight a ringer type, a sample ringer will sound.)

5. Press Back (right softkey) to return to the Contacts

menu and then press Save (left softkey) to save the

changes.

5. Select a ringer and press r.

6. Press Done (left softkey) to save the new ringer

type.

If you attempt to assign an already in-use speed dial

location to a new phone number, a message will

appear asking if you wish to replace the existing

speed dial assignment. Press Yes (left softkey) to

assign the location to the new phone number and

delete the previous speed dial assignment.

Note

Checking Capacity

To see how many numbers are stored in Contacts:

1. Press M> Contacts > M.

2. Select Capacity.

Selecting a Ringer Type for an Entry

Dialing Nextel Customer Service

Assign a ringer type to a Contacts entry so you can

identify the caller by the ringer type. (See “Ring Tones”

on page 65.)

Your Contacts list is preprogrammed with contact

numbers for Nextel Customer Service.

1. Press M> Contacts and then scroll to an entry.

To dial Nextel Customer Service from your Contacts:

1. Press M > Contacts and scroll to NEXTEL CARE.

2. Press N to place the call.

2. Press Edit (left softkey) or press M> Edit to display

the Edit Entry menu.

3. Select Ringer and press r to display the Ring

Tones menu.

Java Applications (page 1 13)

105

Section 2F

Datebook

Datebook stores up to 250 events. You can store events

over a thirteen month period — twelve months after and

one month before the current date.

Tools

ࡗ

Datebook (page 106)

A Datebook event contains:

Digital Rights Management (DRM) (page 1 1 7 )

GPS Enabled (page 1 1 8 )

ⅷ A subject — A name you assign to the event. You can

also enter a phone number, Direct Connect number,

or Talkgroup number here. After the event is stored,

you can call this number from Datebook or when you

get a reminder of this event.

Memo Feature (page 125)

Voice Records (page 126)

Media Center (page 128)

ⅷ A location — The location of the event. You can also

enter a phone number, Direct Connect number, or

Talkgroup number here. After the event is stored, you

can call this number from Datebook or when you get

a reminder of this event.

Call Timers (page 134)

Your phone is equipped with several personal information

management features that help you manage your busy lifestyle.

This section shows you how to use these features to

turn your phone into a time management planner that

helps you keep up with your contacts, schedules, and

commitments.

ⅷ A start time — The start time automatically assigned

to an event is the beginning of the day. You can

change the start time, or assign no start time, before

storing the event.

ⅷ A duration — The length of time the event lasts.

106

ⅷ A date — The date automatically assigned to an

event is the date that was highlighted or selected

when you began creating the event. You can change

this date before storing the event.

ⅷ In month view, days with events appear with a

marker in the corner.

To view an event:

1. Select the day the event occurs.

2. Select the event.

ⅷ A repeat — Lets you store the event as a recurring

event.

ⅷ A reminder — If an event has a start time, you can set

Datebook to remind you that the event is going to

start.

To change the current view:

1. While viewing Datebook, press M.

2. Select the view you want.

ⅷ A ring tone for the reminder.

ⅷ A profile that your phone uses during the event.

ⅷ A Java application that starts when the event starts.

Day view is the default setting.

Note

Navigating Datebook

Only the subject and date are required.

To scroll through Datebook:

Viewing Datebook

ᮣ

Scroll left and right using the navigation key.

– or –

ᮣ

Press M > Datebook.

You can view Datebook by the day, by the week, or by

the month. You can also view the details of any event.

In week view and month view, press *or #.

ⅷ In day view, brief information about each event for

that day appears.

To see more in day view:

ᮣ

Scroll up and down using the navigation key.

ⅷ In week view, events appear as markers

corresponding to their times.

107

To highlight a day in month view:

Enter the date using the keypad.

To create a Datebook event:

ᮣ

1. While viewing datebook, press New (left softkey).

– or –

To go to today’s date:

In day view, select [New Event].

1. While viewing Datebook, press M.

2. Select Go To Today.

2. To assign a subject to the event, select Subject and:

Ⅲ Enter the name.

To go to any date in Datebook:

1. While viewing Datebook, press M.

2. Select Go To Date.

– or –

Press Browse (left softkey) to choose from

common event names.

– or –

3. Select the date you want.

Enter a phone number, Direct Connect number,

or Talkgroup number. After the event is stored,

you can call this number.

Creating Events

Every Datebook event must have a subject and be

stored to a date. Other information is optional.

Ⅲ When you are finished, press r.

You may enter the information in any order by scrolling

through the event details.

After you have entered the information you want, you

can press Done (left softkey) to store the event to

Datebook.

108

3. If you want to assign a location to the event, select

Location and:

Ⅲ Select Date.

Ⅲ Enter the date you want.

Ⅲ Enter the location.

7. If you want to make the event a recurring event:

Ⅲ Select Repeat.

– or –

Enter a phone number, Direct Connect number,

or Talkgroup number. After the event is stored,

you can call this number.

Ⅲ Select the repeat cycle you want.

● If the event occurs more than once a week,

select Multiple Day, and select the days you

want.

Ⅲ When you are finished, press r.

4. The start time automatically assigned to an event is

the beginning of the day. If you want to change the

start time or assign no start time:

● Press Done (right softkey).

Ⅲ In the End field, select the date you want this event

to stop recurring.

Ⅲ Select Start.

8. If you want to create a reminder for this event:

Ⅲ Enter the start time you want.

Ⅲ Select Reminder.

5. If you want to assign a duration to the event, select

Duration and:

Ⅲ Select the reminder time you want, or select

Custom to enter a reminder time.

Ⅲ Select the duration you want, or select Custom

and enter a duration.

If an event has no start time, you cannot create a

reminder for it.

Note

6. The date automatically assigned to an event is the

date that was highlighted or selected when you

began creating the event. To change the date of

the event:

109

9. If you have created a reminder for the event and

Editing Events

want to set the ring tone for that reminder:

To change the details of an event:

Ⅲ Select Ring Tone.

1. Select the day the event occurs.

2. Select the event and press Edit (left softkey).

Ⅲ Select the ring tone you want from the ring tones

stored in your phone.

10. If you want to assign a profile that your phone is

3. Follow the applicable instructions in “Creating

Events” on page 108 to edit the various fields.

switched to while the event is occurring:

Ⅲ Select Profile and then select a profile. (Your

phone switches to this profile when the event

starts and switches back to the previous profile

when the event ends.)

To copy an event to another date:

1. Select the day the event occurs.

2. Select the event and press M > Copy.

3. Press Yes (left softkey) to confirm.

4. Enter a date and press r.

11. If you want to assign a Java application to start

when the event starts:

Ⅲ Select App and then select an application. (If you

created a reminder for this event, your phone

prompts you to start the Java application when

you get the reminder.)

5. If you want to change more information, follow the

applicable instructions in “Creating Events” on

page 108 to edit the various fields.

12. If you have entered all the information you want for

6. Press Done (left softkey) to store the event.

this event, press Done (left softkey).

If you decide you do not want to store the event:

ᮣ

Press Cancel (right softkey).

110

For Events With Java Applications

Deleting Events

If you assigned a Java application to start when the

event starts, you can start the application when you get

the reminder.

1. Select the day the event occurs.

2. Select the event and press M> Delete.

3. If the event is not a recurring event, press ror

To start the application:

press Yes (left softkey) to confirm.

ᮣ

Press M and then select Launch.

– or –

Making Calls From Datebook and

Datebook Reminders

If the event is a recurring event:

Ⅲ Select This Event Only to delete only the event

selected in step 2.

If you stored a phone number, Direct Connect number,

or Talkgroup number in the Subject or Location field of a

Datebook event, you can call or send a Call Alert to that

number from Datebook or from the reminder of that

event.

Ⅲ Select Repeat Event to delete all occurrences of the

event.

Receiving Reminders

If you created a reminder for a Datebook event, when

the reminder time occurs, your phone notifies you with

text on the display and a reminder tone.

If you store the same type of number (phone number

or DC/Talkgroup number) in both fields, the number in

Subject takes precedence.

To view more details about the event:

ᮣ

Press View (left softkey).

To dismiss the reminder:

Press Dismiss (right softkey).

ᮣ

111

Making Calls From Datebook

Making Calls From Datebook Reminders

To make a phone call:

To call a number:

1. Highlight or select the event containing the

ᮣ

Press Nor press Mand then select Call # in Event.

To make Direct Connect calls or Talkgroup calls:

Press the Direct Connect button.

To send a Call Alert:

Press M and select Alert # in Event.

number you want to call.

2. Press Nor press M and then select Call # in Event.

ᮣ

To make a Direct Connect call or Talkgroup call:

1. Highlight or select the event containing the

number you want to call.

ᮣ

Customizing Datebook Setup

2. Press the Direct Connect button.

– or –

To access Datebook set up options:

If you did not include a #before a Talkgroup you

want to call, press M, select Talkgroup, and then

press the Direct Connect button.

1. Select M > Datebook.

2. Press M and then select Setup.

You can view or change these options:

To send a Call Alert:

ⅷ Start View — sets Datebook to start in day view, week

view, or month view when you access Datebook.

1. Highlight or select the event containing the

number you want to send a Call Alert to.

ⅷ Daily Begin — sets the beginning of your day. This is

the earliest time of day displayed in week view, if you

have a twelve-hour day view.

2. Press M and select Alert # in Event.

112

ⅷ Delete After — sets the amount of time Datebook waits

to delete an event after it occurs.

4. Press Done (left softkey).

Running Applications

ⅷ Time Shift — lets you shift the times of all Datebook

events. This is useful if you are traveling to a different

time zone.

To run an application that has a shortcut on the main menu:

1. Press Mand then select the application or suite of

applications you want to run.

ⅷ Alert Timeout — sets the amount of time a tone

continues to sound when you receive a message

notification, Call Alert, or Datebook reminder.

2. If you have selected a suite of applications, select

the application you want to run.

ⅷ Clock — controls whether the time and date appear in

standby mode; sets time and date format; sets year.

To run an application that does not have a shortcut on the

main menu:

Java Applications

1. Press M > Java Apps.

2. Select the application or suite of applications you

want to run. If you have selected a suite of

applications, select the application you want to run.

Installing Applications

1. Press M > Java Apps.

If you do not hear the sounds associated with the

Java application, select Settings > Volume and

check the volumes of Java Speaker and Java

Earpiece.

Tip

2. Select the application or suite of applications you

want to install. Installation messages appear as the

application installs.

3. If you want to create a shortcut to the Java

application on the main menu, press Next (left

softkey), press Yes (left softkey), and then

press r.

113

Suspending Applications

Ending Applications

When you suspend an application, it does not stop

running. It goes to the background so that you can run

another application in the foreground.

To end an application:

1. Press M > Java Apps.

2. If the application you want to end is part of a suite

of applications, select the suite.

To suspend an application:

ᮣ

Press P.

To view your suspended applications:

Press M > Java Apps and select Suspended Apps.

3. Scroll to the application you want to end.

4. Press End (left softkey).

ᮣ

– or –

You can have up to three applications running at one

time — one running in the foreground and two in the

background.

If End is not one of your options, press M and

select End.

You can also end applications from the Suspended

Apps screen

Tip

Resuming Applications

To end all applications:

You can resume a suspended application at any time.

This brings it to the foreground.

1. Press M > Java Apps.

To resume a suspended application:

2. Scroll to Suspended Apps.

1. Press M > Java Apps and select Suspended Apps.

2. Select the application you want to resume.

3. Press M and then select End All.

4. Press r or press Yes (left softkey) to confirm.

114

5. If you want to end all applications without letting

them exit, press EndNow (left softkey) and then

press Finish (right softkey).

2. Scroll to the application you want to delete.

3. Press M > Deinstall.

4. Press r or Yes (left softkey) to confirm.

Downloading Applications

5. When your phone has finished deleting the

application, press Done (left softkey).

If you want to run more Java applications, you can

download them into your phone.

To delete all Java applications:

To access a catalog of items available for purchase and

download:

1. Press M > Java Apps.

2. Scroll to Java System. (You may need to press

More [left softkey] to display Java System.)

ᮣ

Press M > Java Apps > Buy Games&Apps or

Download Apps.

3. Press M > Delete All.

– or –

4. Press r or press Yes (left softkey) to confirm.

Press M > Downloads.

You can also go to www.nextel.com, sign on to your

account, and click the Digital Media option for a wide

selection of available Java applications and

downloading instructions.

Managing Memory

To view the amount of memory available for Java

applications:

1. Press M > Java Apps > Java System.

Deleting Applications

2. Press Next (left softkey).

To delete an application:

3. To see more memory information, press Next (left

softkey) again.

1. Press M > Java Apps.

115

Deleting Java applications frees memory.

To remove a shortcut:

1. Press M > Settings > Personalize > Menu Options >

Java application data is stored in your phone using

the same memory space used to store messages,

voice records, pictures, ring tones, and wallpaper

images. Deleting some of these other items frees

memory for Java applications.

Note

Add/Remove Apps.

2. Scroll to view the list of Java applications. Any

application that has a shortcut on the main menu

has a checkmark next to it.

Shortcuts on the Main Menu

3. Scroll to the application(s) you want to remove the

shortcut for and press rto remove the

checkmark.

When you install an application, you can create a

shortcut to the application on the main menu.

4. Press Done (left softkey).

To create a shortcut to an application that is already

installed:

You can also access the Add/Remove Apps menu

from standby mode by pressing M> M>

Main Menu Setup > Add/Remove Apps.

Tip

1. Press M > Settings > Personalize > Menu Options >

Add/Remove Apps.

2. Scroll to view the list of Java applications. Any

application that has a shortcut on the main menu

has a checkmark next to it.

3. Scroll to the application(s) you want to create a

shortcut for and press r.

4. Press Done (left softkey).

116

ⅷ For time-based items, either the date and time the

item is scheduled to expire, or the number of days

left.

Digital Rights Management (DRM)

When you download multimedia content available

online, such as Java applications, these items may be

subject to DRM restrictions. DRM, or digital rights

management, is a system that defines how copyrighted

multimedia content can be distributed and used.

ⅷ For count-based items, the number of credits (uses)

left or an unlimited use notice.

ⅷ The name of the item’s vendor.

To view the license of a DRM item:

DRM limits items to time-based or count-based usage

settings. Time-based settings let you use the given item

for a specified interval. Count-based settings let you

use an item for a specified number of times after you

download it or for unlimited use.

1. Go to the location on your phone that contains the

item you want.

2. Highlight the DRM item you want to view license

information for.

3. Press M and then select License Info.

Managing Items

Renewing DRM Licenses

Depending on how the third-party vendor has set rights

for the given DRM item, you may be unable to perform

some of the following tasks.

Java application data is stored in your phone using

the same memory space used to store messages,

voice records, pictures, ring tones, and wallpaper

images. Deleting some of these other items frees

memory for Java applications.

Note

Viewing License Information

You can check a DRM item’s license to view the

following information:

1. Go to the location on your phone that contains the

item you want.

Keep in Mind” on page 1 1 9 .

117

2. Highlight the DRM item you want to renew.

4. If prompted, press Yes (left softkey).

3. Press Renew (left softkey) or press M and then

select Renew.

About Expired Items

Most items will continue to display on your phone until

you delete them. You can also choose to renew the

license for an expired item.

4. Select the link to the page where you purchased

the item and then follow the vendor’s instructions

for purchasing an additional license.

Deleting Items

GPS Enabled

If you delete a DRM item that you purchased from

Nextel from your phone, you will have to purchase it

again to download it.

Your phone’s GPS Enabled feature uses information

from Global Positioning System (GPS) satellites orbiting

the Earth to determine the approximate geographical

location of your phone, expressed as latitude and

longitude. The availability and accuracy of this location

information (and the amount of time that it takes to

calculate it) will vary depending on the environment in

which you are using the GPS feature. For example,

GPS location fixes are often difficult to obtain indoors,

in covered locations, between high buildings, or in

other situations where you have not established a clear

broad view of the sky. SEE: “IMPORTANT: Things to

You cannot delete items that are DRM locked.

Note

Under certain conditions, third-party vendors will let

you download an item multiple times within a given

time frame, even if you deleted the item. Please

contact the third-party vendor of an item to learn

more about the vendor’s download regulations.

1. Go to the location on your phone that contains the

item you want.

2. Highlight the DRM item you want to delete.

When you make a 911 emergency call, the GPS feature

of your phone can help emergency personnel locate

3. Press M and then select Delete.

118

you if your phone has adequate access to GPS satellite

signals and your emergency response center is

equipped to process such information.

ⅷ Inside of buildings, trains, or other covered vehicles.

ⅷ Under any other metal or concrete roof or structure.

ⅷ Between tall buildings or under dense tree-cover.

ⅷ Near a powerful radio or television tower.

You can also use the GPS feature to view your

approximate location. Location information appears on

the phone’s display.

ⅷ When your GPS antenna is covered (for example, by

your hand or other object) or facing the ground.

Java applications loaded on your phone can also

request your location. If your phone is connected to a

laptop computer or similar device, software running on

that device can request your location. To protect your

privacy, you can control whether these requests are

granted. See “GPS Privacy Options” on page 88.

ⅷ In temperature extremes outside the operating limits

of your phone.

Walking or driving very slowly may also substantially

reduce GPS performance.

Even where location information can be calculated in

such situations, it may take much longer to do so, and

your location estimate may not be as accurate.

Therefore, in any 911 call, always report the location to

the emergency response center if you can and if you

cannot, remain on your phone for as long as the

emergency response center instructs you.

IMPORTANT: Things to Keep in Mind

If you are using the GPS feature of your phone while

driving, please give full attention to driving and to the

road.

Where adequate signals from multiple satellites are not

available (usually because your GPS antenna cannot

establish a view of a wide area of open sky), the GPS

feature of your phone WILL NOT WORK. Such

situations include but are not limited to:

Even where adequate signals from multiple satellites

are available, your GPS feature will only provide an

approximate location, often within 150 feet (45 meters)

but sometimes much further from your actual location.

Advice on how to improve GPS performance is

ⅷ In underground locations.

119

provided in “Enhancing GPS Performance” on

page 122.

Making an Emergency Call

Dial 911 and press N to be connected to an

emergency response center. If you are on an active

call, you must end it before calling 911.

While the GPS feature of your phone can be a valuable

navigational aid, it does not replace the need for careful

navigating and good judgment. Never rely solely on

one device for navigation. Remember that the accuracy

of the location information and the time needed to

obtain it will vary depending on circumstances,

particularly the ability to receive signals from adequate

numbers of satellites.

When you make an emergency 911 call, the GPS

feature of your phone begins to seek information to

calculate your approximate location. It will take the GPS

feature of your phone some time to determine your

approximate location. Even where your phone has

good access to sufficient GPS satellite signals and

network assist data, it may take 30 seconds or more to

determine the approximate location. This time will

increase where there is reduced access to satellite

signals. When your approximate location is

On emergency calls, your phone uses assistance

information from the phone network to improve the

speed and accuracy of your phone’s location

calculation. If such assistance information becomes

unavailable, it may reduce the speed and accuracy of

the location calculation.

determined, it is made available to the appropriate

emergency response center.

The satellites used by the GPS feature of your phone

are controlled by the U.S. government and are subject

to changes implemented in accordance with the

Department of Defense GPS user policy and the

Federal Radionavigation Plan. These changes may

affect the performance of the GPS feature of your

phone.

In some cases, your local 911 emergency response

center may not be equipped to receive GPS location

information. For this reason, and because the GPS

location information reported is only approximate or

may not be available in your location (see

“IMPORTANT: Things to Keep in Mind” on page 1 1 9),

always report your location to the 911 operator you

120

speak to when making an emergency call, if able, just

as you would when using a phone without GPS

capabilities.

2. Scroll to view the entire screen.

This displays the following information about the last

time your location was calculated:

If you are concerned about whether your local 911

emergency response center is equipped to receive

GPS location information, contact your local

authorities.

Note

ⅷ The time (as Greenwich Mean Time) and date that

the location was last calculated.

ⅷ The approximate location, expressed as latitude and

longitude.

In general, if your phone has access to signals from

more GPS satellites, your location will be determined

faster and more accurately than if your phone has

access to signals from fewer GPS satellites.

ⅷ The estimated accuracy of the calculated location.

This estimate of accuracy is only a very rough

estimate and may vary substantially from the actual

accuracy of the approximate location information

reported.

If your phone does not have adequate access to GPS

satellites signals, the location of the nearest cell tower

in contact with your phone is automatically made

available to the emergency response center, if the

center has the capability to receive such information.

ⅷ The number of satellites used to calculate the

location. In general, more satellites make for better

accuracy.

To calculate your location again:

See “Enhancing GPS Performance” on page 122 for

information on how to help your phone determine your

location.

ᮣ

Press Rfrsh (left softkey).

It may take your phone several minutes to complete the

process of determining your location. During this time,

a message usually appears on your phone’s display

saying your phone is scanning for satellites. For tips on

Viewing Your Approximate Location

1. Press M > GPS > Position.

GPS Performance” on page 122.

121

getting the best location calculation, see “Enhancing

call, the location of the nearest cell tower in contact

with your phone is made available to the appropriate

emergency response center if the center has the

capability to receive such information. If this happens

when you are trying to view your location on the

phone’s display, you will see a message indicating that

your phone cannot access satellites.

The Position screen displays the updated information.

To cancel a location calculation before it is completed:

ᮣ

Press Cancel (right softkey) to return to the Position

screen or press P to return to standby mode.

To improve accuracy and increase your chances of a

successful calculation, do the following while your

phone is determining your approximate location:

Each time approximate location of your phone is

calculated, the latest location information is stored in

your phone and remains there even when your phone

is powered off. You will see this information the next

time you view the Position screen.

ⅷ Stay in the open. The GPS feature works best where

there is nothing between your phone and a large

amount of open sky. If possible, go outside, away

from tall buildings and foliage. While performance in

a building is improved by moving closer to windows,

glass with certain sun shielding films may block

satellite signals.

If you received a phone call or alert while attempting to

determine your location, the Position screen will

disappear, but your phone will continue attempting to

determine its location. If it is successful, the new

location information will be displayed the next time you

view the Position screen.

ⅷ Hold your phone to enhance reception. Signals from GPS

satellites are transmitted to your GPS antenna, which

is in your phone antenna. Hold your phone away

from your body, giving the antenna clear access to

satellite signals. Do not cover the antenna area with

your fingers or anything else.

Enhancing GPS Performance

Sometimes the GPS feature of your phone may be

unable to complete a location calculation successfully.

If this happens when you are making an emergency

122

ⅷ Stand still. If possible, stand still until your phone is

finished determining your location. Moving your

phone at a walking pace while your phone is

calculating your approximate location may

substantially decrease GPS performance.

When you make an emergency call, your phone

does not rely upon the almanac to determine your

location.

Note

If your satellite almanac data is out of date, your phone

may prompt you to update it. Follow the instructions

that appear on the phone’s display. You may be asked

to go to a Web site or call a customer service number.

ⅷ In a car. When using the GPS Enabled feature in a car,

position your phone so that the GPS antenna has

good access to GPS signals through the car’s

windows. Typically, the GPS antenna has best access

to GPS signals in a car when placed near a window.

Using GPS With Map Software

You can use the GPS feature of your phone to provide

approximate location data to a laptop computer or

similar device that is running interactive map software

such as that made by DeLorme or Microsoft. This way,

if your phone has good access to GPS signals, your

approximate position on a map can be made available

as you travel in a vehicle.

Although moving your phone at a walking pace

decreases GPS performance, moving it at the speed

of a moving car does not.

Note

ⅷ Stay in network coverage. The network will provide your

phone with information that helps determine your

location more quickly and accurately.

To do this, connect your phone to your laptop (or other

device) with a data cable and set your phone to

transmit data (see “T o connect your phone to your

laptop or other device:” on page 124). Your phone then

provides your approximate location to the device

running the map software, which displays your location

on a map. Your phone provides an updated location

Updating Satellite Almanac Data

Another way to keep the GPS feature of your phone

working well is to keep your satellite almanac data up

to date.

123

every second and the map software displays your

changing location on its map.

2. With the phone’s display facing up, insert a

micro-USB data cable into the charger connector.

See “Enhancing GPS Performance” on page 122 for

more details on obtaining good location information.

Because your phone is continuously determining

your location, using the GPS feature of your phone

with map software uses the phone’s battery power

quickly.

Note

Software Compatibility

3. Insert the data plug into the COM port of your

Your phone sends location information to your laptop

or other device using the standard National Marine

Electronics Association (NMEA) format. Your phone

supports output messages in NMEA-0183 format and

supports the following NMEA-0183 sentences: GGA,

GLL, GSA, GSV, RMC, and VTG.

laptop or other device.

Make sure no other application is using the COM port

selected.

Make sure the COM port settings of your laptop or

other device are set to the following:

The map software running on your laptop or other

device must support NMEA 3.0.

ⅷ Bits per second: 4800

ⅷ Data bits: 8

To connect your phone to your laptop or other device:

ⅷ Parity: None

1. Pull open the connector cover.

ⅷ Stop bits: 1

ⅷ Flow control: Hardware

124

To set your phone to send location information to your

laptop or other device:

To view the memo later:

Press M > Memo.

ᮣ

1. Press M > GPS > Interface.

To delete the memo:

2. Set NMEA OUT to On.

1. Press M > Memo.

Your phone is now sending location data to your

laptop or other device.

2. Press and hold Delete (left softkey) and then

press r.

To stop your phone from sending location data to your

laptop or other device:

To edit the memo:

1. Press M > Memo.

ᮣ

Set NMEA OUT to Off.

2. Press and hold Delete (left softkey) to delete the

number.

Each time you power your phone on, NMEA OUT is

automatically set to Off.

3. Enter the new number and press r.

To make a call to the memo number:

1. Press M > Memo.

Memo Feature

Memo lets you store a number, make a call to that

number, and save it to Contacts.

2. To make a phone call, press N.

– or –

To create a memo:

To make a Direct Connect call, press the Direct

Connect button.

1. Press M > Memo.

2. Enter a number and press r.

Contacts Entries” on page 99.

125

To store the memo number to Contacts:

1. Press M > Memo and then press M.

2. Select Store to Cntcs.

Voice Records

A voice record is a recording you make with your

phone and can play back. You can record notes to

yourself or phone calls.

3. To store the number as a new entry, select

[New Contact].

Your phone can store up to 20 voice records.

– or –

Creating Voice Records

To store the number to an existing entry, select the

entry.

To record a note to yourself:

4. With the Contacts type field highlighted, scroll left

or right to display the Contacts type you want to

assign the number.

1. Press M > VoiceRecord > [New VoiceRec].

2. Say the message you want to record into the

microphone.

5. If you want to add more information to the entry,

follow the applicable instructions in “Creating

3. When you are finished recording, press r.

To record a phone call:

6. Press Save (left softkey).

1. While on an active call, press Mand select

Record.

2. When you are finished recording, press r.

Recording of phone calls is subject to applicable

laws regarding privacy and recording of phone

conversations.

Note

126

2. Scroll to an unlocked voice record and press

Playing Voice Records

M> Delete.

1. Press M > VoiceRecord.

3. Press r or Yes (left softkey) to confirm.

To delete all voice records:

2. Select the voice record you want to play.

3. To stop the voice record while it is playing,

press r.

1. Press M > VoiceRecord.

To fast forward, scroll right. To rewind, scroll left. To

pause or resume, press any number key.

2. Scroll to any voice record and press M> Delete All.

3. Press r or Yes (left softkey) to confirm.

Tip

Labeling Voice Records

Locking Voice Records

When you create a voice record, it is labeled with the

time and date it was recorded. You can then rename it

with a custom label.

When you lock a voice record, it cannot be deleted

until you unlock it.

To lock or unlock Voice Records:

1. Press M > VoiceRecord.

2. Scroll to a voice record and press Label (left

softkey).

2. Scroll to a voice record and press M.

3. Select Lock to lock the message.

– or –

3. Enter a label and press r.

Deleting Voice Records

Select UnLock to unlock the message.

To delete a voice record:

When a voice record is locked, this icon R appears

next to it.

1. Press M> VoiceRecord.

127

Managing Memory

Media Center

To view the amount of memory available for voice records:

The Media Center lets you access pictures, musical

ringtones and voice recordings stored in your phone’s

memory.

1. Press M > VoiceRecord.

2. With [New VoiceRec] highlighted, press Memory (left

softkey).

All pictures stored in your phone’s memory can be

accessed through the Media Center.

To free more memory by deleting all unlocked voice

records:

The following audio recordings can be accessed

through the Media Center:

1. From the voice records memory screen, press

Delete (left softkey).

ⅷ Voice records created when your phone was not in a

call.

2. Press r or Yes (left softkey) to confirm.

ⅷ Musical ringtones in the list of ringtones.

Voice records are stored in your phone using the

same memory space used to store messages, Java

application data, pictures, ring tones, and wallpaper

images. Deleting some of these other items frees

memory for voice records.

Note

ⅷ Audio files saved from MMS messages you received.

ⅷ Audio files (songs, recordings, podcasts) you

downloaded to your phone.

Pictures and audio files accessible through the Media

Center can be sent in MMS messages.

Multimedia message size limits apply when attaching

items from the Media Center. See “Creating and

Sending Messages” on page 152.

128

Viewing the Media Center

Keeping the Last Filter Setting

1. Press M > Media Center.

You can set the Media Center to show all items every

time you access it or to keep the filtering setting you

had when you last viewed it.

2. Scroll to view the items in the Media Center.

Choosing Thumbnail View or List View

1. Press M> Media Center > M> Setup >

Remember Filter.

You can set the Media Center to show a thumbnail of

each picture as you view the list of items or show the

list of items without thumbnails.

2. Select On to keep the filtering setting you had

when you last viewed the Media Center.

1. Press M> Media Center > M> Set View.

When you receive your phone, the Media Center is set

to show all items every time you access it.

2. Select Thumbnail View orPlain List View.

Accessing Items Listed

Filtering by Media Type

1. Press M> Media Center.

You can set the Media Center to show all types of

media items, only pictures, or only audio recordings.

2. Scroll down to highlight an item and press rto

select it.

ⅷ Media: All — all items accessible through the Media

Center.

3. Scroll right or left to access additional items.

ⅷ Media: Pictures — all pictures.

Sorting by Time or Name

ⅷ Media: Audio — all audio files accessible through the

Media Center.

You can set the Media Center to sort items by the time

the item was created or by the name of the item.

1. Press M> Media Center > M> Setup > Sort.

“Locking Items” on page 132.

129

2. Select By Time or By Name.

DRM Items

When you receive your phone, the Media Center is set

to sort items by time.

Except for Java applications, which download to Java

Apps, the default location for any DRM items that you

download is the Media Center.

Forward Locked Items

Depending on how a given third-party vendor has set

rights for an item, the item may include the following

status icons.

Some items saved to the Media Center from MMS

messages or by downloading may be forward locked.

Forward locked items are usually copyright protected,

and you cannot share them with anyone.

The item is a DRM item.

You cannot remove forward locking from an item.

The DRM item has expired.

When you view items in the Media Center, one of these

icons appears next to each forward locked item:

All DRM items are forward locked. As with other items

in the Media Center, you can lock DRM items. See

Forward locked.

Forward lock and locked.

]

Pictures

The Media Center lets you view pictures and send

pictures that are not forward-locked in MMS messages,

Direct Connect calls, or with Bluetooth. You can assign

them to Contacts entries or set them as your phone’s

wallpaper.

When an item is locked, it cannot be deleted from the

Media Center. See “Locking Items” on page 132.

Locking an item has no effect on its forward locking.

130

Viewing Pictures

Sending With Bluetooth

To view a picture, select it from the list of items in the

Media Center.

You must set up your phone to send items with

Bluetooth before sending a picture. See “Bluetooth” on

page 135.

If your phone is set to show thumbnails, a thumbnail of

each picture appears next to the picture in the list of

items. If your phone is not set to show thumbnails, this

icon g appears next to the picture.

1. Scroll to or select a picture.

2. Press M > Send Via > Bluetooth.

3. Select the device you want to transfer to or search

for the device you want to transfer to by selecting

[Find Devices].

To see a larger or smaller view of the picture you are

viewing:

1. Press M and then select Zoom.

4. If prompted, bond with the device. (Your phone

connects to the device and transfers the picture.)

2. Select the zoom option you want.

If the picture does not fit in the display, scroll left and

right and up and down to view different parts of the

picture.

Setting as Wallpaper

1. Scroll to or select a picture.

2. Press M and then select Set As Wallpaper.

Sending in a Message

Audio Files

1. Scroll to or select a picture and then press Send

(left softkey).

The Media Center lets you play audio files (songs,

recordings, podcasts), send them in MMS messages,

and assign them to Contacts entries.

2. Create and send the message. (See “Multimedia

Messages” on page 152.) The picture you selected

is automatically included as an attachment.

131

2. Create and send the message. (See “Multimedia

Messages” on page 152.) The audio file you

selected is automatically included as an

attachment.

Playing Audio Files

ᮣ

To play an audio file, select it from the list of items

in the Media Center.

This icon a appears next to each audio file in the list of

items.

Renaming Items

1. Press M > Media Center.

When viewing the list of items in the Media Center,

you can scroll left or right, or press *or #, to

change the type of media that is displayed in the list.

Tip

2. Scroll to or select an item.

3. Press M and then select Rename.

Ⅲ To stop the file before it has finished playing,

press r or scroll down.

4. Delete the item’s name, enter a new name, and

press r.

Ⅲ To restart the audio file, press r.

Locking Items

Ⅲ To to fast forward, scroll right. To rewind, scroll left.

The longer you hold the scroll key, the faster the

voice recording fast forwards or rewinds.

When you lock an item in the Media Center, it cannot

be deleted until you unlock it.

Ⅲ When you play an audio file, an animated image

appears on the display.

1. Press M > Media Center.

2. Scroll to or select an item.

Sending in a Message

3. Press M and then select Lock or Unlock to lock or

unlock the item.

1. Scroll to or select an audio file and press Send (left

softkey).

132

When you view items in the Media Center, one of these

icons appears next to each locked item:

Deleting All Items

You can delete all unlocked items currently in view,

depending on how Media Center filtering is set. See

“Filtering by Media T y pe” on page 129. If filtering is set

to show all types of Media Center items, all unlocked

items are deleted.

Locked.

Forward lock and locked.

]

Deleting Items

1. Press M > Media Center.

2. Press M and then select Delete All.

3. Press Yes (left softkey) to confirm.

Deleting items from the Media Center means they can

no longer be accessed anywhere in your phone,

including the list of ringtones, the list of voice records,

and Contacts.

Managing Memory

Under certain conditions, some DRM vendors will not

charge you if you download an item multiple times

within a given time frame. Please contact the DRM

vendor to learn more about their download regulations.

To view your used memory, free memory, and memory

capacity of your phone:

1. Press M > Media Center.

2. Scroll to or select any item in the Media Center.

3. Press M and then select Memory Usage.

To free memory, delete items.

Deleting an Item

1. Press M > Media Center.

2. Scroll to or select an item.

3. Press M and then select Delete.

4. Press Yes (left softkey) to confirm.

133

ⅷ Kbytes Reset — keeps a running total of the number of

kilobytes sent and received by your phone, until you

reset it.

Items accessible through the Media Center that are

stored in your phone’s memory use the same

memory space used to store messages, Java

application data, and voice records created when

your phone is in a call. Deleting some of these other

items frees memory.

Tip

To view or reset a timer:

1. Press M > Call Timers.

2. Select a timer and press r.

Call Timers

3. To reset the timer, press Reset (left softkey). Press

r or press Yes (left softkey) to confirm.

Call timers measure the duration of your phone calls,

Direct Connect, or Group Connect calls, and the

number of kilobytes sent and received by your phone:

The values displayed by Call Timers should not be

used for billing. Call timers are estimates only.

Note

ⅷ Last Call — displays the duration of your most recent

phone call.

ⅷ Phone Reset — keeps a running total of your phone

call minutes, until you reset it.

ⅷ Phone Lifetime — displays the total minutes of all your

phone calls.

ⅷ DC/GC Reset — keeps a running total of all of your

Direct Connect and Group Connect call minutes,

until you reset it.

ⅷ DC/GC Lifetime — displays the total minutes of all your

Direct Connect and Group Connect calls.

134

Turning Bluetooth On and Off (page 135)

Section 2G

Turning Bluetooth On and Off

By default, your device’s Bluetooth feature is turned off.

Turning Bluetooth on makes your phone “discoverable”

by other in-range Bluetooth devices.

Bluetooth

ࡗ

Using the Bluetooth Menu (page 136)

Pairing Bluetooth Devices (page 137)

Transferring Items Via Bluetooth (page 1 43)

To turn Bluetooth on:

1. Press M> Bluetooth > Setup > Power.

2. Select On and press r to enable Bluetooth.

To turn Bluetooth off:

Your phone features built-in Bluetooth technology, allowing you

to share information more easily than ever before. Bluetooth is

a short-range communications technology that allows

you to connect wirelessly to a number of Bluetooth

devices, such as headsets and hands-free car kits, and

Bluetooth-enabled handhelds, computers, printers, and

wireless phones. The Bluetooth communication range

is usually up to approximately 30 feet.

1. Press M> Bluetooth > Setup > Power.

2. Select Off and press r to disable Bluetooth.

To turn discoverable mode on:

ᮣ

Press M> Bluetooth > Find Me.

For the duration selected under Find Me Time, the

device will be discoverable by other devices that

are within range.

135

ⅷ Setting your phone’s visibility (or “discoverability”) for

other Bluetooth devices.

Bluetooth Status Indicators and LED

The Bluetooth status indicators on your phone’s display

and external display screen, and the Bluetooth LED

(page 6) above the external display on the front of the

closed phone shows your Bluetooth connection status

at a glance:

To access the Bluetooth menu:

1. Press M> Bluetooth.

2. Set your Bluetooth options.

Ⅲ Select Hands Free to discover and connect to

hands free devices.

No LED or Status Indicator – Bluetooth is disabled (default

status)

Ⅲ Select Link to Devices to scan for and connect your

phone to an available Bluetooth device.

B – Status indicator will blink and LED will be solid

when the phone is in discovery mode.

Ⅲ Select Device History to link to devices that have

been connected to your phone.

B – Status indicator will be solid and LED will blink

when connected to a Bluetooth device.

Ⅲ Select Setup to turn Bluetooth on and off, rename

your phone for Bluetooth, and set the time for the

Find Me command listed below.

Using the Bluetooth Menu

Ⅲ Select Find Me to make your phone discoverable

to Bluetooth devices for a determined period of

time.

The Bluetooth menu allows you to set up many of the

characteristics of your phone’s Bluetooth service,

including:

ⅷ Powering Bluetooth on or off.

ⅷ Entering or changing the name your phone uses for

Bluetooth communication.

136

Understanding Bluetooth Access Settings

Pairing Bluetooth Devices

A Bluetooth device can have either Automatic or Ask

security access. The first time a Bluetooth device

connects to your i576 phone, you must grant the

device permission to connect. You can then change

the access setting of the device to either Automatic or

Ask.

Paired Devices

The Bluetooth pairing process allows you to establish

trusted connections between your phone and another

Bluetooth device. When devices are paired, a passkey

is shared between devices, allowing for fast, secure

connections while bypassing the discovery and

authentication process.

If you set a device to Automatic, then that device can

connect automatically to your phone when it is in

range. If you set a device to Ask, then that device must

request permission before it can connect to your

phone.

To pair your phone with another Bluetooth device:

1. Press M > Bluetooth > Link to Devices. (Your phone

will display a list of discovered in-range Bluetooth

devices.)

Devices are automatically granted permission during

the ten seconds after bonding. For more information

about bonding, see “Bluetooth Bonds (Pairing)” on

page 140.

2. Select a device and press r

3. Enter the passkey and press r.

The default for hands-free devices, such as Bluetooth

Due to different specifications and features of other

Bluetooth-compatible devices, display and

operations may be different, and functions such as

transfer or exchange may not be possible with all

Bluetooth-compatible devices.

headsets, is Automatic.

Note

137

Renaming Your Phone

Setting Your Phone for Bluetooth

Bluetooth devices are listed by their Bluetooth

addresses unless you name them. Your i576 phone

comes with a default device name of “Motorola Phone.”

it is recommended you rename your i576 phone with a

unique device name.

You can configure the following aspects of Bluetooth:

ⅷ Power.

ⅷ Device name.

ⅷ Find Me duration.

1. Press M> Bluetooth > Setup > Name.

Turning Bluetooth On or Off

2. Press and hold Delete (left softkey) to delete the

current name.

You can turn power to your phone’s Bluetooth feature

on or off. While Bluetooth power is on, your phone can

communicate with other devices.

3. Use the keypad to enter a new name and

press r.

You can turn off Bluetooth if you want to prolong

battery life or you enter an area where Bluetooth is

prohibited.

Setting a Find Me Duration

You can change how long your phone remains

discoverable to other devices. The default duration is

one minute. See “Allowing Bluetooth Devices to Find

Your Phone” on page 139.

The default setting is Off.

To turn Bluetooth on or off:

1. Press M > Bluetooth > Setup > Power.

2. Select On or Off and press r.

To select a default duration for Find Me:

1. Press M > Bluetooth > Setup > Find Me Time.

2. Select 1 minute, 2 minutes or5 minutes and

press r.

138

Allowing Bluetooth Devices to Find Your Phone

Accessing Bluetooth

To let devices find your phone and its Bluetooth

address, place your phone in discoverable mode.

ᮣ

Press M > Bluetooth.

– or –

Discoverable mode lasts for the duration selected

under Find Me Time in the Bluetooth Setup menu. During

this time, other devices that are within range can detect

your phone. You can then choose to grant or deny

each device’s request to bond.

While in a call, press M and select Use Bluetooth.

If Bluetooth power is set to Off on your phone, you

will be prompted to turn power on in order to use

Bluetooth.

Note

You must grant the device’s request in order to

receive information from the device on your phone.

Note

Making a Bluetooth Connection

The following sections cover how to connect your

phone to another Bluetooth device.

To start discoverable mode:

Press M > Bluetooth > Find Me.

ᮣ

Some Bluetooth devices only have full functionality

when DTMF dialing is set to On. See “Phone Calls

Features” on page 61.

Note

Discovering Hands-Free Bluetooth Devices

To have your phone search for Bluetooth devices:

Sharing Your Phone’s Bluetooth Address

ᮣ

Press M > Bluetooth > Hands Free > [Find Devices].

To bond with your phone, devices must have your

phone’s Bluetooth address. To find devices that you

want to bond with, you can make your phone

discoverable, so that other devices learn your phone’s

Bluetooth address. You can also have your phone

search for Bluetooth devices to learn their addresses.

A list of hands-free devices displays. Devices that

do not have a name are listed by their Bluetooth

address.

Ⅲ To stop the search and go to the list of found

devices, press Stop (left softkey).

139

Ⅲ To stop the search and return to the previous

screen, press Cancel (right softkey).

Bluetooth PINs

Bluetooth devices exchange PINs (also known as

passkeys or pass codes) in order to establish

encrypted transfers between them. When prompted,

enter the Bluetooth PINs.

Bluetooth Bonds (Pairing)

A bond is an encryption key that is generated when

two Bluetooth devices exchange a common PIN. This

key verifies the identity of each device, and encrypts

any data transferred between the devices. Once the

PIN is exchanged, the devices do not have to be in

discoverable mode in order to exchange information.

You only need to create a bond once between two

devices.

Some Bluetooth devices ship with Bluetooth PINs.

Please refer to your Bluetooth device’s user guide to

locate this information.

If a device ships without a Bluetooth PIN, then you can

enter any PIN for that device. To establish a connection

to that device, enter the same PIN for both your phone

and the device. For example, if you enter 1234 as the

device’s PIN, then enter 1234 as your phone’s PIN.

If you search for devices and you select a device that

you are currently bonded with from the list of found

devices, then the current bond with that device will be

voided. You will have to re-establish the bond.

In some cases, you may not be required to enter the

Bluetooth PIN.

Your i576 requires that you create a bond in order to

connect with another device. However, you can choose

to establish bonds with devices without connecting.

Devices are automatically granted permission during

the ten seconds after bonding.

Note

140

To create a bond between your phone and another device:

Connecting to a Stored Device

1. Press M > Bluetooth.

If you have previously connected to a device, the

device will be stored on your phone so you can

connect with it easily.

2. If you want to create a bond and connect with the

given device, select Hands Free > [Find Devices].

1. Press M > Bluetooth > Hands Free and then select

the device you want to connect to.

– or –

If you want to create a bond to have it available for

future use, select Link to Devices.

2. If prompted whether you want to bond with the

device, press Yes (left softkey).

3. Select the device you want.

3. If prompted, enter the Bluetooth PIN and press Ok

(left softkey). Your phone will connect to the device.

4. Press Yes (left softkey) if you are prompted to

do so.

Using Bluetooth During a Call

5. Enter a PIN if you are prompted to do so, and then

press Ok (left softkey).

During a call, you can connect with available Bluetooth

devices.

6. If necessary, enter the same PIN for the other

device.

If the Hands Free menu contains only one device,

then your phone will automatically try to connect to

that device.

Note

7. Select Bond With if you are prompted to do so.

To use Bluetooth during a call:

1. While in a call, press M and then select

Use Bluetooth.

2. Select the device you want to connect to.

“Discovering Hands-Free Bluetooth Devices” on

141

Disconnecting From a Device

Viewing Device Details

1. Press M > Bluetooth > Hands Free.

To view the name and the access setting of a device:

1. Press M > Bluetooth > Device History.

2. Select the device you want.

2. Press Drop (left softkey) and then press Yes (left

softkey).

Pressing No (right softkey) when prompted exits the

menu without disconnecting the device.

Note

Editing Device Names

To edit a device name so the device is easier to identify.

1. Press M > Bluetooth > Device History.

2. Scroll to the device you want to rename.

3. Press Edit (left softkey) or press r.

Setting Device Details

The device history stores a list of up to 20 devices that

have connected with your phone.

To view the device history:

4. Select Name and then press and hold Delete (left

ᮣ

Press M > Bluetooth > Device History.

softkey) to delete the current name.

From the device history, you can:

ⅷ Edit device names.

5. Enter the new name and press r.

A device name can have a maximum of 40

characters.

Note

ⅷ Change device access settings.

ⅷ Delete devices.

If you delete a device from device history, you will

Note

have to find the device to connect with it. See

page 139.

142

Files sent or received may be up to 200 KB.

Editing Device Access Settings

This measurement represents optimal conditions.

Actual conditions may require you to position your

phone closer.

Note

1. Press M > Bluetooth > Device History.

2. Scroll to the device you want to set access for.

3. Press Edit (left softkey) or press r.

4. Select Access.

You can only connect your phone to one device at a

time.

Go to www.nextel.com and click on Accessories for

a list of i576 phone Bluetooth compatible devices.

Note

5. Select Ask or Automatic and press r.

Deleting Devices

Sending Contacts

1. Press M > Bluetooth > Device History.

1. Press M > Contacts.

2. Scroll to the device you want to delete.

3. Press M> Delete and then press Yes (left softkey).

2. Highlight the contact you want to send.

3. Press M > Send Via... > Bluetooth.

Transferring Items Via Bluetooth

4. Select the device you want to transfer to.

– or –

Sending Contacts, Datebook Events and

Media Center Items

Search for the device you want to transfer to by

selecting [Find Devices].

5. If prompted, bond with the device.

Bluetooth lets you send Contacts entries, Datebook

events, and compatible Media Center items to

connected devices.

6. Your phone connects to the device and transfers

the contact.

143

Sending Datebook Events

Sending Media Center Items

1. Press M > Datebook.

You can only send audio files and pictures if they are

not forward locked and if their DRM settings do not

prevent you from sending them.

2. Highlight the event you want to send.

3. Press M and then select Send Via....

1. Press s> Media Center.

4. For a repeating event, select This Event Only to send

only this occurrence or Repeat Event to send all

instances.

2. Scroll to the file you want to send.

3. Press s > Send Via... > Bluetooth.

5. Select Bluetooth.

4. Select the device you want to transfer to

– or –

6. Select the device you want to transfer to.

Search for the device you want to transfer to by

selecting [Find Devices].

– or –

Search for the device you want to transfer to by

selecting [Find Devices].

5. If prompted, bond with the device.

7. If prompted, bond with the device. Your phone

connects to the device and transfers the event.

6. Your phone connects to the device and transfers

the selected file.

144

Receiving Items

Viewing and Storing Received Items

You receive a prompt when your phone has an

incoming transfer.

After an incoming transfer is complete, your phone

translates the item. The item appears on your phone’s

display.

ᮣ

Press Accept (left softkey) to accept the transfer or

press Reject (right softkey) to reject the transfer.

You can choose to either store or discard the item.

Items are stored as follows:

Canceling Transfers

ⅷ Contact entries are stored to Contacts.

You can cancel a transfer while the transfer is in

progress.

ⅷ Pictures are accessible through the Media Center.

ⅷ Datebook events are stored to Datebook.

Ⅲ To store the item, press Store (left softkey).

1. Press Cancel (right softkey).

2. Press Yes (left softkey) to cancel press No (right

softkey) to continue with the transfer.

Ⅲ To discard an item without saving it, press

Discard (right softkey).

Message Center (page 148)

145

Section 3

Service Features

Now that you’ve explored your phone’s fundamentals, it’s time

to learn about the calling features that enhance your service.

This section outlines your basic wireless service

features.

Section 3A

Service Features:

The Basics

Message Center

ࡗ

Receiving Messages (page 149)

Voicemail (page 151)

The message center manages your messages.

When you receive the following types of messages, you

can access them through the message center:

Multimedia Messages (page 152)

Text Messaging (SMS) (page 171)

Caller ID Blocking (page 172)

Call Waiting (page 1 72)

ⅷ Voicemail messages.

ⅷ Multimedia Messaging Service (MMS) messages

(includes most phone-to-phone text messages).

ⅷ Net Alerts.

ⅷ Text messages (SMS – Short Message Service).

Putting a Call on Hold and Making a Second Call (page

173)

You can listen to or view these messages, delete them,

or continue to store them in the message center.

ࡗ

Making a Three-Way Call (page 1 7 4 )

Call Forwarding (page 1 7 4 )

The message center also lets you create and send

MMS messages, including phone-to-phone text

messages. It stores messages you have sent and lets

you save drafts of messages you are creating.

Making International Calls (page 177)

Special Dialing Codes (page 177)

Nextel Phone Services (page 178)

148

Accessing the Message Center

Receiving Messages

ᮣ

Press M> Messages.

When you receive a voicemail message, Multimedia

Messaging Service (MMS) message, text message

(SMS), or Net alert, you have two ways to access the

message:

Message Center Options

After accessing the message center, select the option

you want:

ⅷ Respond to the message notification that appears

when the message is received.

ⅷ [Create Mesg] — begin creating an MMS message.

ⅷ Voice Mail — access voicemail messages you have

received.

ⅷ Dismiss the message notification and access the

message later through the message center.

ⅷ Inbox — access MMS messages you have received.

Message Notifications

ⅷ Drafts — access MMS messages you have created

and saved but not sent.

When you receive a message, your phone notifies you

with text on the display, the message LED on the front

of the phone, and a notification tone or vibration. You

can access the message or dismiss the notification.

ⅷ Sent Items — access MMS messages you have

created and sent.

ⅷ Net Alert — access over-the-air alerts that you receive

from Nextel.

ᮣ

To dismiss the message notification with the phone

closed, press ( on the top of the phone.

ⅷ SMS — access text (SMS) messages you have

received. (Most traditional phone-to-phone text

messages will arrive as MMS messages and will be

found in the Inbox.)

– or –

To dismiss the message notification if the phone is

open, press r or Back (right softkey).

Message Notification” on page 72

149

If you dismiss the notification, the message is not

deleted. It can be accessed through the message

center.

Retrieving Your Messages

All your messages are stored in the message center.

The message center shows how many messages you

have of each type.

If you are not on a phone call when you receive a

message, your phone sounds a notification tone every

30 seconds until you access the message, you dismiss

the notification, or the alert time-out expires.

1. Press M > Messages.

2. Scroll to the type of message you want to access.

3. Press r.

The message LED will be activated when you receive a

new message alert. It will remain on until there are no

unread items in the Message Center or until it reaches

the 30 minute timeout.

To access voicemail for the first time, you must dial

into your voicemail box using your PTN (your wireless

phone number). If there is already a message in your

voicemail box, then you can access your voicemail

through the message center.

Note

When you are on a phone call, you can receive

message notifications for all types of messages except

MMS messages. For other types of messages, your

phone may sound a notification tone during the call or

after you end the call, depending on how you set your

notification options.

For information on notification options, see “Setting

150

you hear the greeting, press the star key to access your

voicemail box. The system will prompt you to enter

your password. Enter the last seven digits of your

Nextel PTN. For example: 5557777. This is your

temporary password. Follow the system instructions to

complete your mailbox setup.

Voicemail

To receive voicemail messages, you must first set up

your voicemail box.

Tip

If you are bringing your phone number from another

carrier, we suggest you set up your voicemail box

after the number you brought to Nextel is active on

your Nextel phone and your temporary phone

number is deactivated. If you set up your voicemail

box prior to this, all messages and all settings

(including your greeting and password) will be lost

when the number you have brought to Nextel

becomes active.

You are in the main voicemail menu when you hear the

voicemail system options.

For details on using your voicemail, follow the audio

prompts provided by the voicemail system.

Playing Messages

When you receive a new voicemail message, you can

either listen to it immediately by pressing Call (left

softkey), or later by pressing Back (right softkey).

Setting Up Your Voicemail Box

Using your i576 phone, dial your ten-digit Nextel

Personal Telephone Number (PTN). For example:

7035557777. Follow the system instructions to create a

new four- to seven-digit password, record your name,

and record a greeting. When the system says, “Thank

you for using Nextel Voicemail,” your mailbox is set up.

To listen to your voicemail messages after dismissing

the onscreen prompt, press M > Messages > Voicemail.

You will be connected to your voicemail box.

If you are setting up your voicemail from a phone other

than your i576, dial your ten-digit Nextel PTN. When

151

ⅷ Sent Items — MMS messages you have created and

sent.

Multimedia Messages

The messages in the Inbox, Drafts, and Sent Items are

grouped in pages of nine messages. Scroll to view the

messages on a page.

Multimedia Messaging Service (MMS) lets you send

and receive messages that may include text, pictures,

and audio recordings. You can send and receive these

messages from your phone, through any email

account, and from www.nextel.com.

To go to the next page:

ᮣ

Scroll right.

To go to the previous page:

Scroll left.

To open a message on the current page:

Highlight a message and press r.

Your MMS address is [email protected].

Your PTN is your ten-digit Nextel Personal Telephone

Number.

ᮣ

Most common phone-to-phone text messages are

sent and received as MMS messages on your i576.

Text messages sent from other phones or mobile

devices to your PTN arrive as MMS messages.

Note

ᮣ

Creating and Sending Messages

Navigating the Inbox, Drafts, and Sent

Items

Each message you create may contain the following

fields:

ⅷ To — the phone numbers or email addresses of one

or more recipients.

You can access MMS messages through the following

options in the message center:

ⅷ Mesg — the body of the message. This may include

text, pictures, ring tones, or voice records.

ⅷ Inbox — MMS messages you have received.

ⅷ Drafts — MMS messages you have created and saved

but not sent.

ⅷ Subject — the subject line.

152

ⅷ Attach — one or more attachments. These may be

pictures, ring tones, or audio files, including voice

records that you create while creating the message.

While entering text, you can always press Mto choose

a text input mode from the context-sensitive menu. See

“Entering Text” on page 21.

ⅷ Cc — the phone numbers or email addresses of

more recipients.

Message Size

You can create and send messages of up to 100 KB,

including attachments. The size of the message

appears at the top of the display as you are creating

the message.

ⅷ Auto Replies — lets you insert replies the recipient can

choose from when replying to your message, if the

recipient’s phone also has this feature.

ⅷ Priority — sets the priority of the message to normal or

high.

Sending or Canceling

ⅷ Report — lets you receive a report confirming that

your message was delivered.

To send the message at any time after it has been

addressed:

ⅷ Valid Until — sets a date after which no more attempts

are made to deliver the message.

ᮣ

Press Send (left softkey).

– or –

To send a message, you must address it to at least one

recipient. All other message fields are optional.

If Send is not one of your options, press M and

then select Send.

You can fill in the message fields in any order.

Entering Text

In message fields that require you to enter text, you can

begin entering the text from the keypad when the field

is highlighted.

153

To cancel the message at any time:

2. To address the message:

Ⅲ Select To. Enter the phone number or email

address from the keypad and press r. Repeat

this action to enter more phone numbers or email

addresses.

ᮣ

At the message screen, press Cancel (right softkey).

– or –

Press P to cancel the message and save it in

Drafts.

– or –

Press Contcs (left softkey) or M > Recent Calls to

select recipients from Contacts or Recent Calls.

Highlight recipient(s), press r to select them (a

checkmark will appear next to the entry), and

then press Done (left softkey).

Creating a Message

1. Press M > Messages > [Create Mesg].

– or –

Select [Create Mesg] from Inbox, Drafts, or Sent Items.

To remove a phone number or email address from

– or –

Tip

the list of message recipients, scroll to the phone

number or email address and press Remove (right

softkey).

Begin creating a message from Contacts, the

Recent Calls list, standby mode, or the Media

Center. See “More Ways to Begin a Message” on

page 157.

Ⅲ When you are finished addressing the message,

press Back (right softkey).

– or –

3. To enter or edit the body of the message:

Reply to a received message. See “Replying to a

Message” on page 156.

Ⅲ Select Mesg and then use any of the following

options to enter your message.

154

See “Inserting Pictures, Audio Files, and Voice

Adding More Message Options

If you have created a signature, the signature

automatically appears in this field. Text you enter

appears before your signature. See “Customizing

MMS” on page 167.

Note

1. To view more message fields in a message you

are creating, select MORE or press More (left

softkey).

● Enter text from the keypad.

2. If you want to create or edit the subject line:

● Use a Quick Note. See “Quick Notes” on

page 158.

Ⅲ Select Subject. Enter text from the keypad.

Ⅲ Select a Quick Note. See “Quick Notes” on

page 158.

● Insert a picture, a ring tone, or an audio file.

Records” on page 158.

When you are finished, press r.

3. If you want to add more recipients in addition to

those in the To field:

4. If you want to send the message now, press

Send (left softkey).

Ⅲ Select Cc and add recipient(s).

– or –

4. If you want to insert replies the recipient can

choose from when replying to your message,

select Auto Replies.

If Send is not one of your options, press Mand

then select Send.

Ⅲ Enter text from the keypad or select a Quick Note

(see “Quick Notes” on page 158). When you are

finished creating your list of replies, press Back

(right softkey).

– or –

To fill in more message fields, see “Adding More

Message Options” on page 155.

5. If you want to set the priority of the message, select

Priority and then select a setting.

155

6. If you want to receive a report confirming that your

message was delivered, select Report > On Delivery.

sending a reply to all, some recipients may be in this

field.

ⅷ Mesg — the first 40 characters of the message you

are replying to. Text you add to the body of your

message appears above this.

7. If you want to set a date after which attempts to

deliver the message end:

Ⅲ Select Valid Until, select a date by scrolling or

entering numbers, and press r.

ⅷ Subject — “Re:” followed by the subject line of the

message you are replying to, if any.

Ⅲ To set no date, press No Date (left softkey).

ⅷ Cc — If you are sending a reply to all, some recipients

may be in this field.

8. To send the message, press Send (left softkey).

– or –

To reply to a message:

If Send is not one of your options, press Mand

then select Send.

1. View the message you want to reply to. If you have

already viewed the message, scroll to it.

Replying to a Message

2. To reply to the sender only, press Reply (left

softkey).

You can reply to a received message while you are

viewing it. If you have already viewed a message, you

can also reply to it while it is highlighted in the

message center. You cannot reply to unread

messages.

– or –

To reply to the sender and all recipients, press M

and select Reply All.

When you reply to a message, some of the fields in

your reply are filled in automatically:

ⅷ To — the phone number or email address of the

sender of the message you are replying to. If you are

156

3. A list of short phrases is displayed. Select any of

To begin a message from Contacts:

these phrases.

1. From the Contacts list, scroll to an entry.

– or –

2. Scroll left or right to view the Contacts types until

you see the icon for the phone number or email

address you want to send a message to.

Select [Create Reply] to begin the body of your

message without using any of these phrases.

4. Edit any message fields you want to change and

3. Press Create (left softkey).

then press r.

4. Create and send the message.

5. Press Send (left softkey).

To begin a message from the Recent Calls list:

1. From the Recent Calls list, scroll to an entry.

To create new reply phrases to use in later reply

messages, see “Customizing MMS” on page 167.

Tip

2. If the entry has more than one phone number

stored, view the phone number you want to send

the message to.

If the message you are replying to was sent with auto

replies, it contains a numbered list of possible replies.

Press the number of the reply you want to send. The

reply is sent immediately without any further action.

Note

3. Press Create (left softkey).

– or –

More Ways to Begin a Message

If Create is not displayed, press Mand then select

Create.

In addition to beginning a message from the message

center, you can begin a message from Contacts, the

Recent Calls list, standby mode, or the Media Center.

4. Create and send the message.

157

To begin a message from standby mode:

1. Enter a phone number.

2. Select the Quick Note you want to insert into the

message.

To add a quick note after you have already started

entering a message, press M, select Add QNotes,

and select a note.

Tip

2. Press M and then select Create.

To begin a message from the Media Center:

To create new Quick Notes to use in later messages,

see “Customizing MMS” on page 167.

1. From the Media Center, scroll to or select a picture or

audio file.

2. Press Send (left softkey).

Inserting Pictures, Audio Files, and Voice

Records

3. Create and send the message. The file you

selected is automatically included as an

attachment.

When you are filling in the Mesg field, you can insert

pictures, audio, and voice records into the body of the

message.

Quick Notes

You can insert more than one of these objects into a

message. You may include text in the body of your

message in addition to these objects.

When you are filling in the Mesg and Subject message

fields, you can add ready-made words or short phrases

called Quick Notes. After you add these words or

phrases, you can edit them as you would any other

text.

For information on how objects inserted into the

body of a message appear when a message is

received, see “Embedded Objects and Attachments”

on page 162.

Note

To insert a quick note:

1. While you are creating a message, scroll to or

select Mesg or Subject and then press QNotes (left

softkey).

158

2. Select Insert Audio. A list of audio files that can be

Inserting Pictures

included in a message appears.

You can insert pictures from Media Center.

To hear an audio file before inserting it, highlight the

audio file and press Play (left softkey).

Tip

Pictures that you download to your phone or receive in

a message may be forward locked, meaning they

cannot be included in a message.

3. Select the file you want to insert.

If this icon ] appears next to a picture, you cannot

send it in a message.

Note

Inserting Voice Records

You can insert voice records from your list of voice

records.

1. While you are filling in the Mesg field, press M.

2. Select Add Picture. A list of pictures that can be

included in a message appears.

Voice records created by recording a phone call

cannot be included in a message.

3. Select the picture you want to insert.

To insert a voice record:

1. While you are filling in the Mesg field, press M.

Inserting Audio Files

2. Select Insert Audio. A list of voice records that can

You can insert audio files from the Media Center.

be included in a message appears.

Audio files that are preloaded on your phone cannot

be included in a message.

3. Select the voice record you want to insert.

– or –

Audio files that you download to your phone or receive

in a message may be forward locked, meaning they

cannot be included in a message.

Select Record Voice.

To hear a voice record before inserting it, highlight

the voice record and press Preview (left softkey).

Tip

1. While you are filling in the Mesg field, press M.

159

Removing an Inserted Item

Sending a Draft

To remove an item inserted into the body of the message

you are creating:

1. Press M > Messages > Drafts.

2. Scroll to a draft and press M> Send.

1. Select the Mesg field and highlight the item you

want to remove.

Editing a Draft

1. Press M > Messages > Drafts.

2. Select the draft you want to edit.

3. Continue as you would when creating a message.

2. Press Delete (right softkey).

You can also attach items to messages by selecting

Note

MORE and then selecting Attach.

Drafts

Deleting a Draft

When you send a draft, it is deleted from Drafts.

To delete a message in Drafts without sending it:

1. Scroll to a draft and press Delete (left softkey).

2. Press r or press Yes (left softkey) to confirm.

While you are creating a message, you can save it in

Drafts before you send it.

You can view, edit, send, or delete saved drafts.

Saving a Message in Drafts

ᮣ

While you are creating a message, press M>

Save.

You can continue to create the message. The version

you saved in Drafts will not change.

160

1. Press M> Messages > Sent Items.

Drafts Icons

2. Scroll to a message and press Resend (left softkey).

Draft.

If your message was sent successfully, Resend will

not appear as an option.

Note

High priority.

Deleting Sent Messages

Attachment.

1. Scroll to or view a message and press Delete (left

softkey).

High priority with an attachment.

2. Press r or press Yes (left softkey) to confirm.

Sent Items

Sent Items Icons

Messages you have sent or tried to send are stored in

Sent Items.

Successfully sent.

Forwarding Sent Items

Unsuccessfully sent.

High priority.

1. Press M > Messages > Sent Items.

2. Scroll to a message and press M > Forward.

3. Edit and send your message.

Attachment.

High priority and locked.

High priority with an attachment.

Resending Messages

If a message was not sent from your phone, you can

resend it.

Attachments” on page 167.

161

Embedded Objects and Attachments

Receiving a Message

Messages may contain pictures or audio recordings as

part of the body of the message or as attachments.

When you receive an MMS message, a message

notification appears on the display.

If a message contains pictures or audio recordings in

the body of the message, highlight each picture or

audio recording to view or play it.

To view the message:

1. Press ror press Read (left softkey). The message

is downloaded from the message server.

If a message contains a picture or audio recording as

an attachment, open the attachment to view the picture

or play the audio recording.

2. If the message fills more than one screen, scroll to

read it.

To dismiss the message notification:

Audio recordings in messages do not play if VibeAll

is set to On.

Note

ᮣ

Press Later (right softkey).

This icon w appears on the display, reminding you

that you have a new message.

Opening Attachments

1. View the message.

Navigating a Message

2. Highlight the attachment you want to open.

Attachments appear at the end of a message.

As you scroll through a message, numbers, email

addresses, and Web site URLs are highlighted.

3. Press r.

Pictures and audio recordings are also highlighted.

Attachments that are of an unknown type cannot be

opened, but they can be deleted. See “Deleting

Note

162

Viewing a Slide Show

Viewing Received Messages From the

Message Center

Your phone can receive MMS messages containing

slide shows.

1. Press M > Messages > Inbox.

A slide show may contain a series of pictures that

display in sequence. It may also include one or more

audio recordings.

2. Select the message you want to read. If you have

not viewed the message before, the message is

downloaded from the message server.

When you view a message containing a slide show,

this icon i appears.

3. If the message fills more than one screen, scroll to

read it.

To view a slide show in a message:

1. View the message.

2. Highlight the slide show and press r.

To speed up the slide show, scroll right or scroll down.

To repeat the part of the slide show you have just

viewed, scroll left or scroll up.

ᮣ

To view the slide show again, press Restart (left

softkey).

You can create and send MMS messages containing

slide shows on www.nextel.com.

Note

163

Inbox Icons

Actions for Received Messages

Unread message.

Deleting

Read message.

To delete unread messages:

Reply sent.

1. Scroll to a message and press Delete (left softkey).

2. Press r or press Yes (left softkey) to confirm.

To delete read messages:

Forwarded.

Locked.

High priority.

1. Scroll to or view a message, and then press M>

Delete Message.

Attachment.

{

Locked, with an attachment.

High priority and locked.

High priority with an attachment.

High priority and locked, with an attachment.

2. Press r or press Yes (left softkey) to confirm.

Forwarding

To forward a message:

1. Scroll to or view a message, and then press M>

Forward.

2. Create and send your message.

Embedded objects and attachments are included

when you forward a message.

164

To make a Direct Connect call to a Direct Connect number

in a message:

Locking and Unlocking

When you lock a message, it cannot be deleted until

you unlock it.

1. View the message.

2. Highlight a Direct Connect number and press the

1. Scroll to or view a message.

Direct Connect button.

2. Press M and select Lock Message or

Unlock Message.

To send a Call Alert to a Direct Connect number in a

message:

Calling a Number in a Message

1. View the message.

If a message you receive contains a phone number,

Direct Connect number, or Talkgroup ID, you can call

or send a Call Alert to that number.

2. Highlight a Direct Connect number and then press

press M > Alert.

3. Press the Direct Connect button.

To make a Talkgroup call to a Talkgroup ID in a message:

1. View the message.

These numbers may appear in the From field, the To

field, the Cc field, the subject line, or the body of the

message.

To make a phone call to a phone number in a message:

1. View the message.

2. Highlight a Talkgroup ID and then press M >

Talkgroup.

2. Highlight a phone number and press N.

3. Press the Direct Connect button.

165

Storing Message Information to Contacts

Going to a Web Site

If a message you receive contains a phone number,

Direct Connect number, Talkgroup ID, or an email

address, you can store this information to Contacts.

If a message contains one or more Web site URLs, you

can go to the Web site.

1. View the message.

These numbers may appear in the From field, the To

field, the Cc field, the subject line, or the body of the

message.

2. Highlight a URL and then press M > Go To Website.

The entire URL must appear in the message.

Otherwise, you cannot go to the Web site.

Note

1. View the message.

2. Highlight a number or email address and then

Saving an Embedded Picture or Audio File

press M> Save Number or Save Email.

1. View the message.

3. To store the number or email address as a new

entry, select [New Contact].

2. Highlight a picture or audio file and then press

M > Save Picture or Save Audio.

– or –

Deleting an Embedded Picture, Ring Tone, or

Voice Record

To store the number or email address to an

existing entry, select the entry.

4. With the Contacts type field highlighted, scroll left

or right to display the Contacts type you want to

assign the number or email address.

To delete a picture, ring tone, or voice record that is part of

the body of a message you receive:

1. View the message.

5. Press Done (left softkey).

2. Highlight an item and then press M>

Delete Picture orDelete Audio.

166

To save the pictures in a slide show:

Saving Attachments

1. View the slide show.

1. View the message.

2. When the picture you want to save appears,

press M > Save Picture.

2. Highlight an attachment and then press M>

Save Attachment.

To save the audio files in a slide show:

1. View the slide show.

Deleting Attachments

1. View the message.

2. When the audio comes up, press M> Save Audio.

2. Highlight an attachment and then press M >

Del Attachment.

3. If the slide show contains more than one audio file,

select the audio file you want to save.

3. Press r or press Yes (left softkey) to confirm.

Deleting Slide Shows

Saving Slide Shows

1. Highlight the slide show or view the slide show.

2. Press Mand select Delete Slideshow.

When viewing a slide show in a message you have

received, you can save the parts of the slide show.

If the slide show contains pictures, you can save each

picture as it appears. If the slide show contains voice

records, you can save each voice record at any time

during the slide show.

Customizing MMS

The Setup menu lets you customize MMS for your

phone:

ⅷ Friendly Name — Enter text here to create a friendly

name. Your friendly name is the name displayed in

the From field on other iDEN phones when they

receive messages from you.

167

ⅷ Signature — Enter text here to create a signature. Your

signature is text that is automatically inserted at the

end of all messages you create. You can edit the text

before sending the message.

2. With [Create Mesg] highlighted, press M> Setup.

This option is available from many context-sensitive

menus when you are using MMS.

Tip

ⅷ Quick Notes — lets you create new Quick Notes and

edit or delete Quick Notes you have created.

New Quick Notes and Reply Phrases

To create a new Quick Note or Reply Phrase:

ⅷ Replies — lets you create new reply phrases and edit

or delete reply phrases you have created.

1. From the Setup menu, select Quick Notes or Replies.

ⅷ Cleanup — controls how long messages remain in the

Inbox and Sent Items before they are deleted.

2. Select [New Quicknote] or [New Reply].

– or –

ⅷ Downloads — controls whether your phone

automatically downloads new messages when they

arrive, or only after you respond to a prompt or read

the message from the Inbox. Set this option to

Automatic if you want your phone to download new

messages automatically; set the option to Manual if

you want your phone to prompt you before

downloading new messages.

Press New (left softkey).

3. Enter text from the keypad.

4. When you are finished, press r.

You can edit only Quick Notes and reply phrases you

have created.

To edit a Quick Note or Reply Phrase:

1. From the Setup menu, select Quick Notes or Replies.

2. Select a Quick Note or reply phrase.

3. Edit the text.

ⅷ Memory Size — displays a report on the free and used

memory on your phone.

To access the Setup menu:

1. Press M > Messages.

4. When you are finished, press r.

168

The cleanup option can be set to any of the following:

Deleting Quick Notes and Reply Phrases

ⅷ Off — messages are never automatically deleted.

You can delete only Quick Notes and reply phrases

you have created.

ⅷ 5 Messages — If you have more than five messages,

messages are deleted in the order they were

received, starting with the oldest, until five are left.

To delete a Quick Note or reply phrase:

1. From the Setup menu, select Quick Notes or Replies.

2. Scroll to a Quick Note or reply phrase.

ⅷ 10 Messages — If you have more than ten messages,

messages are deleted in the order they were

received, starting with the oldest, until ten are left.

3. Press Delete (left softkey) and then press ror

press Yes (left softkey) to confirm.

ⅷ 1 Day — Messages are deleted if they are older than

one day.

To delete all Quick Notes or all reply phrases:

1. From the Setup menu, select Quick Notes or Replies.

2. Press M and select Delete All.

ⅷ 3 Days — Messages are deleted if they are older than

three days.

ⅷ Custom — Lets you create a clean-up option of up to

99 messages or 99 days.

3. Press r or press Yes (left softkey) to confirm.

To set the cleanup option for the Inbox:

1. From the Setup menu, select Cleanup > Inbox.

2. Choose a cleanup option.

Setting the Cleanup Option

The cleanup option controls how long messages

remain in the Inbox and Sent Items before they are

deleted. You set the cleanup option for the Inbox and

Sent Items separately.

3. To automatically delete messages now, press r

or press Yes (left softkey). To delete messages later,

press No (right softkey).

The cleanup option deletes only read, unlocked

messages.

“Setting the Cleanup Option” on page 169.

169

To set the cleanup option for Sent Items:

1. From the Setup menu, select Cleanup > Sent Items.

2. Choose a cleanup option.

Managing Memory

All messages in the Inbox, Drafts, and Sent Items share

the same memory space.

3. To automatically delete messages now, press r

or press Yes (left softkey). To delete messages later,

press No (right softkey).

The content of a message in the Inbox is not stored

in your phone’s memory until the message is read.

Unread messages use very little memory.

Note

To view your used memory, free memory, and memory

capacity:

Choosing to Delete Messages Later

If you choose to delete messages later, rather than at

the time you set the cleanup option, the type of

cleanup option you set determines when messages

are deleted.

1. Press M > Messages.

2. With [Create Mesg] highlighted, press M.

3. Select Setup > Memory Size.

If you set an option that cleans up messages according

to how many you have, messages are deleted when

you exit the message center after setting the option.

This option is available from many context-sensitive

menus when you are using MMS.

Tip

If you set an option that cleans up messages according

to how old the messages are, messages are deleted

when you power on your phone.

ⅷ To free memory, delete messages.

ⅷ To delete many messages at once, see “Deleting

Multiple Messages” on page 1 7 1.”

ⅷ To set messages to be deleted automatically, see

170

To delete all unlocked messages:

Messages are stored in your phone using the same

memory space used to store Java applications data,

voice records, ring tones, pictures, and wallpaper

images. Deleting some of these other items frees

memory for messages.

Note

1. Select Inbox, Draft, or Sent Items.

2. Press M and select Delete All.

3. Press r or press Yes (left softkey) to confirm.

Deleting Multiple Messages

Text Messaging (SMS)

You can delete read, unlocked messages from the

Inbox, messages in Drafts, or successfully sent

messages in Sent Items in groups or all at once.

With text messaging (SMS), you can receive instant text

messages from another messaging-ready phone or

from an email account. When you receive a new

message, an alert displays on your phone’s screen.

To delete more than one message:

1. Scroll to or view a message.

Your phone's SMS address is [email protected].

Your PTN is your ten-digit Personal Telephone Number.

2. Press M and then select Delete Multiple.

3. Select the messages you want to delete by

scrolling to them and pressing r. A checkmark

appears next to messages that are selected.

Most traditional phone-to-phone text messages

arrive as MMS messages on your i576. Your phone

can send and receive MMS messages.

Note

4. Press Delete (left softkey).

Your phone can receive SMS text messages, but it

cannot send them.

5. Press r or press Yes (left softkey) to confirm.

171

Accessing Text Messages

Per-Line Blocking

ᮣ

When you receive a text message, an alert is

displayed on your phone’s screen. Press Read (left

softkey) to display the message. Use your

navigation key to scroll down and view the entire

message.

You can request that Nextel Customer Service

permanently block delivery of your phone number on

every call you make. In this case, you may need to

display your number for certain calls.

To show your number on a per-call basis:

ᮣ

Press *82 before dialing the call.

Caller ID Blocking

Call Waiting

Caller ID allows people to identify a caller before

answering the phone by displaying the number of the

incoming call. If you do not want your number

displayed when you make a call, follow these steps.

Call Waiting lets you receive a second call while on an

active call. Call Waiting is always available, unless you

turn it off for a specific call.

Per-Call Blocking

If you are on a call and receive a second call, your

phone emits a tone and displays a message.

To block delivery of your phone number to other Caller ID

units for a single phone call:

To accept the second call and put the active call on hold:

ᮣ

Press *67 before dialing the call.

ᮣ

Press Yes (left softkey).

Your Nextel phone number cannot be blocked from

calls made to 911, 800, 855, 866, 877, 888, or other

toll-free phone numbers.

172

To accept the second call and end the active call:

1. Press P. Your phone rings with the second call.

2. Answer the second call.

3. Set this option to Off.

To turn Call Waiting back on while still on the call, set

Tip

this option to On.

To decline the second call:

Putting a Call on Hold and Making a

Second Call

ᮣ

Press No (right softkey). If you subscribe to

voicemail, the call is forwarded to your voicemail

box, unless you set Call Forward for If Busy to a

different number.

To place a call on hold and make a second call:

1. Place or receive a phone call.

For those calls where you don’t want to be

interrupted, you can temporarily disable Call Waiting

by pressing *70before placing your call. Call

Waiting is automatically reactivated once you end the

call.

Tip

2. While the call is active, press M.

3. Select 2nd Call. This puts the call on hold.

4. Enter the second phone number you want to call.

Turn Off Call Waiting

For quick ways to enter the number, press M.

Note

To turn off Call Waiting during a call:

1. Press M.

5. Press N to place the call.

To end the second call and make the call on hold active

again:

2. Select In Call Setup > Call Waiting.

ᮣ

Press P.

173

To make the call on hold active and put the active call on

hold:

To merge two calls into a three-way call:

1. Place or receive a phone call.

2. While the call is active, press M.

3. Select 2nd Call. This puts the call on hold.

4. Enter the second phone number you want to call.

5. Press N to place the call.

ᮣ

Press Switch (right softkey).

Making a Three-Way Call

With Three-Way Calling, you can talk to two people at

the same time. When using this feature, the normal

airtime rates will be charged for each of the two calls.

6. Select Join.

All three people in the call can speak to and hear each

other.

1. Place or receive a phone call.

2. While the call is active, press M.

3. Select 3 Way. This puts the call on hold.

4. Enter the second phone number you want to call

5. Press N to place the call.

Call Forwarding

Call Forwarding lets you forward all your incoming calls

to another phone number – even when your phone is

turned off. You can continue to make calls from your

phone when Call Forwarding is activated.

6. Press Join (left softkey).

All three people in the call can speak to and hear each

other. If one of the people you called hangs up during

your call, you and the remaining caller stay connected.

If you initiated the call and are the first to hang up, all

callers are disconnected

Call Forwarding sends calls to the phone numbers you

specify. You can forward all calls to one number or

forward missed calls to different numbers depending

on the reason you missed the call.

174

To forward all calls:

Forwarding All Calls

1. Press M > Call Forward > Forward > All Calls.

2. Select To.

When you set your phone to forward all calls, an icon

appears in the top row of the display:

Ⅲ If you specified a forwarding number for all calls

before, this number displays.

Phone line 1 is active; calls to phone line 1 are

being forwarded.

Ⅲ To forward calls to this number, press Back (right

softkey).

Phone line 1 is active; calls to phone line 2 are

being forwarded.

Ⅲ To delete this number, press r, and then press

and hold Delete (right softkey).

Phone line 1 is active; calls to phone lines 1

and 2 are being forwarded.

3. To enter the number you want to forward calls to:

Phone line 2 is active; calls to phone line 1 are

being forwarded.

Ⅲ Enter the number using your keypad.

Ⅲ Press Search (left softkey), select Contacts, Recent

Calls, or Memo, and then select the number you

want to enter.

Phone line 2 is active; calls to phone line 2 are

being forwarded.

Phone line 2 is active; calls to phone lines 1

and 2 are being forwarded.

4. Press r. All your calls are now forwarded to the

number you specified.

“Turning Off Call Forwarding” on page 176

175

To forward missed calls:

Turning Off Call Forwarding

1. Press M > Call Forward > Forward > Detailed.

If you do not want all your calls forwarded, turn the

feature off:

If your phone is set to forward all calls, you must first

turn off call forwarding to access this option. See

Note

1. Press M > Call Forward > To.

2. Set this option to Off.

2. Select If Busy to specify a forwarding number for

calls received when your phone is busy.

All your calls are now sent to your phone.

Calls you miss are forwarded according to the options

set for missed calls. By default, missed calls are

forwarded to voicemail.

3. If you specified a forwarding number for this type

of call before, this number displays.

Ⅲ To forward calls to this number, press Back (right

Forwarding Missed Calls

softkey) and go to step 6.

Ⅲ To delete this number, press r, and then press

and hold Delete (right softkey).

You can specify a forwarding number for each type of

missed call:

4. To enter the number you want to forward this type

ⅷ If Busy — Your phone is on a call or transferring data.

of call to:

ⅷ If No Answer — You do not answer on the first four

rings.

Ⅲ Enter the number using your keypad.

– or –

ⅷ If Unreachable — Your phone is out of coverage or

powered off.

Ⅲ Press Search (left softkey), select Contacts, Recent

Calls, or Memo, and then select the number you

want to enter.

You are charged a higher rate for calls you have

forwarded.

Note

5. Press r.

176

6. Repeat step 2 through step 5 for If No Answer and

If Unreachable.

Special Dialing Codes

7. When you are finished, press Back (right softkey).

Non-Emergency Numbers

Viewing Call Forwarding Settings

Nextel supports many “non-emergency” numbers

(such as #77, 311,...) provided by local and state

governments. These numbers are used to report

non-emergency incidents. If the situation includes

imminent danger or loss of life, you should dial 911.

1. Press M > Call Forward > Forward > All Calls.

2. With To highlighted, press Status (left softkey).

Making International Calls

Telecommunications Relay Service

Your service default is “International Calls Restricted.”

Contact Nextel Customer Service to obtain

international dialing access.

Nextel supports services for communicating with

speech and/or hearing impaired individuals. You can

dial 711 to reach a local Telecommunications Relay

Center. You will then be connected to your destination

number. Relay service works through a

Communications Assistant who reads messages typed

into a TDD/TTY device by a speech or hearing

impaired individual to you. The Communications

Assistant then types your spoken messages to the

hearing or speech impaired individual.

Calls placed between the United States and Canada

do not require an international access code.

Telecommunications Relay Service is available 24

hours a day, seven days a week, and every call is

strictly confidential.

177

Using 711 to reach Telecommunications Relay

Service may not be available in all areas.

Note

Nextel Phone Services

To enable TTY mode:

Contact Nextel Customer Service to obtain these

services or for additional information:

1. Press M > Settings > Phone Calls > TTY.

2. Press and r select On to enable TTY mode.

Some services are not available outside of the

continental United States.

Note

3. For TTY options, highlight Type, press r, and then

select an option:

Second Line Service

Ⅲ TTY (TeleTypewriter) – Type and read text on your

TTY.

You can have two different phone numbers on the

same phone. With Second Line Service, you can:

Ⅲ VCO (Voice Carry-Over) – Speak into the phone

and read text replies on your TTY.

ⅷ Get separate bills for each phone line.

ⅷ Bring in an existing wireless or home phone number

to Nextel to activate on the second line.

Ⅲ HCO (Hearing Carry-Over) – Type text on your

TTY and listen to voice replies on your phone.

ⅷ Have two different area codes (must be in same

market) to convey a local image to callers.

ⅷ Use different ringer styles so that you can tell which

line is receiving a call.

ⅷ Forward incoming calls to either your primary or

alternate line phone number.

ⅷ Choose a Second Line Service plan that fits your

needs.

178

In order to activate Second Line Service, contact your

Nextel Sales Representative or call Nextel Customer

Service.

Sprint 411

Dial 411 from your wireless phone to receive

nationwide listings, movie listings and showtimes,

restaurant reservations, and driving directions, as well

as sports scores, stock quotes, and weather conditions.

Spanish speaking operators available. Receive up to

three phone numbers or pieces of information per call,

and be automatically connected at no additional

charge. Airtime and other charges apply.

To set the active line (primary or alternate):

1. Press M > Settings > Phone Calls > Set Line.

2. Select the phone line you want to be the active

line.

When incoming calls are made to a non-active line,

these calls will be sent to voicemail without ringing.

See “Call Forwarding” on page 1 7 4.

Call Restrictions

You can prevent your phone from making or receiving

long distance, incoming, and outgoing (except 911)

calls.

Wireless Data Services (page 180)

179

Section 3B

Using the Web Browser

Navigating the Web from your phone is easy once you

get the hang of it.

Data Services

Opening the Browser

ࡗ

Downloading Content (page 183)

Using Your Phone as a Modem (page 183)

ᮣ

Press M > Net or press L.

Options available under the home page include:

ⅷ Business Tools – Provides access to business tools.

ⅷ Text Messaging – Provides access to text messaging.

Data services offers easy and amazing features you will really

use. These features – including messaging and

portable Web access – let you have fun, stay in touch,

and stay informed no matter where you go on the

Nextel National Network.

ⅷ Games, Ringers, & More – Provides access to

downloadable items.

ⅷ News, Sports & More – Lets you access news services.

ⅷ Weekly Highlights – Displays Sprint weekly highlights.

ⅷ Email & IM – Allows you to send email and chat.

Wireless Data Services

ⅷ Your Bookmarks – Allows you to access and manage

your bookmarks.

With Web access on your phone, you can browse your

favorite Web sites, making it easier than ever to stay

informed while on the go. Follow sports scores,

breaking news, and weather, and shop on your phone

anywhere on the Nextel National Network.

ⅷ Search – Launches a Web search.

ⅷ Go to URL – Provides access to other URLs.

ⅷ My Account – Lets you configure and manage your

browser settings.

180

ⅷ Help – Displays online help.

Accessing a Bookmark

From the home page:

Creating a Bookmark

1. Select Your Bookmarks.

Bookmarks allow you to store the address of your

favorite Web sites for easy access at a later time.

2. Select a bookmark and press r(or press the

number corresponding to the bookmark you wish

to access).

1. Go to the Web page you want to mark.

2. Press and hold Mto open the browser menu.

3. Select Mark page and press r.

From any other Web page:

1. Press and hold Mto open the browser menu.

2. Select Favorites.

4. Confirm or edit the bookmark name, highlight Save,

and then press r to save the bookmark.

3. Select a bookmark and press r(or press the

number corresponding to the bookmark you wish

to access).

Bookmarking a page does not store the page

contents, just its address.

Note

Some pages cannot be bookmarked. Whether a

particular Web page may be marked is controlled by

its creator.

181

Deleting a Bookmark

Reloading a Web Page

1. From the home page, select Your Bookmarks.

1. Press and hold M to open the browser menu.

2. Highlight a bookmark and press Menu (right

softkey) > Delete.

2. Select Advanced > Reload. (The browser will reload

the current Web page.)

3. Press Yes (left softkey) or press r to confirm the

deletion.

Restarting the Web Browser

If the Web browser seems to be malfunctioning or

stops responding, you can usually fix the problem by

simply restarting the browser.

To return to the home page from any other Web

page, press P.

Tip

1. Press and hold M to open the browser menu.

Going to a Specific Web Site

2. Select Advanced > Restart browser.

To go to a particular Web site by entering a URL (Web site

address):

1. From the home page, select Go to URL.

2. Use your keypad to enter the URL of the Web site

you wish to go to and press r.

3. Press Ok (right softkey) to go to the Web site.

Not all Web sites are viewable on your phone.

Note

182

Downloading Content

Using Your Phone as a Modem

Your phone arrives with Java applications and games

loaded and ready to install. You can download and

install more Java applications. For more information on

Java Security, see “Setting Privacy for Each Java

Application” on page 91.

You can use your phone’s data connection as a

modem for a laptop, handheld device, or desktop

computer.

When used as a modem, your phone has this data

transfer mode:

Check the Downloads menu option on your phone for

a catalog of items available for purchase and

download.

ⅷ Packet data — used for small file transfers such as

email.

You can also go to www.nextel.com, sign on to your

account, and click the Digital Media option for a wide

selection of available Java applications and

downloading instructions.

Using Java applications may cause your phone to

use up more battery power than other uses of your

phone.

Note

To use these services, you must subscribe to a

183

Configuring Windows XP^®to Work With

Your Phone

To connect your phone for use as a modem:

1. Pull and rotate the connector cover.

2. Insert a micro-USB data cable into the phone’s

After you have connected your phone to your

computer, Windows XP must be configured to

recognize it as a modem before it can be used.

charger connector.

Nextel Wireless Web access plan. For more

information on setting up your computer and your

i576 phone for packet and circuit data calls, go to

www.nextel.com.

Note

To install your phone as a modem:

1. Click on Start, select Control Panel, select Printers and

Other Hardware, and click on Phone and Modem

Options.

Windows XP allows users to select different views for

the Control Panel (Classic or Category). If you have

selected Classic View, you will be able to select

Phone and Modem Options directly without having

to select Printers and Other Hardware first.

Note

2. From the modem window, select the Modems tab

and click Add.

3. When the Install New Modem Screen appears, put

a check in the box for Don’t detect my modem, I will

select from a list. Click Next.

3. Insert the other end of the data cable into the data

port of the other device.

184

4. Under Manufacturer, select [Standard Modem Types].

For Model, choose Standard 19200 bps Modem, and

click Next to continue.

5. From the Internet Connection screen, select

Connect Using a Dial-up Modem and click Next.

You may be prompted to select the modem

you would like to use. Make sure you choose

the Standard 19200 bps modem you created

earlier.

Important

5. Select the COM port you want your phone installed

on, and click Next and then Finish to complete the

installation.

6. Name the dial-up connection and click Next.

Creating a Dial-up Connection

It might be helpful to give this dial-up connection a

name that will remind you it is a modem connection

for your phone.

Tip

In order to connect to the Internet or a Network using

your phone, you must set up a dial-up connection.

1. From the Control Panel select Network and Internet

7. To connect via packet data, enter S = 2, and

Connections, and then select Network Connections.

click Next.

2. Under Network Tasks, select Create a New

Connection. When the New Connection Wizard

appears, click on Next to continue.

Packet Data users must be provisioned for

Packet Data by their carrier.

Important

8. Enter the user name and password for your

Internet service and check the appropriate fields

for connecting to your service provider (if

applicable). Click Next and then Finish to complete

the process.

To get to New Connections in Classic View, from the

Control Panel select Network Connections, and click

on New Connection Wizard.

Note

3. Select Connect to the Internet and click Next.

4. Select Set up my connection manually and click Next.

185

Connecting to the Internet or a Network for

the First Time

Before you use your phone to connect to the Internet or

a network for the first time, you must disable LCP

Extensions.

1. From Network Connections, select the dial-up

connection you just created.

2. From the dial-up screen, click Properties.

3. From the Properties screen, click on the Networking

tab, and click on Settings.

4. Remove the checkmark from Enable LCP Extensions,

and click OK. You will then be returned to the

dial-up screen and can now connect to the Internet

or a network.

186

General Precautions (page 188)

Section 4

Safety and Warranty

Information

Section 4A

General Precautions

There are several simple guidelines to operating your phone

properly and maintaining safe, satisfactory service.

Important Safety Information

ⅷ

To maximize performance, do not touch the bottom portion

of your phone where the internal antenna is located while

using the phone.

ࡗ

ࡗ

Maintaining Safe Use of and Access to Your Phone

(page 189)

ⅷ

Speak directly into the mouthpiece.

Avoid exposing your phone and accessories to rain or liquid

spills. If your phone does get wet, immediately turn the

power off and remove the battery.

ࡗ

Using Your Phone With a Hearing Aid Device (page 191)

Caring for the Environment by Recycling (page 193)

Caring for the Battery (page 193)

ⅷ

Do not expose your phone to direct sunlight for extended

periods of time (such as on the dashboard of a car).

Although your phone is quite sturdy, it is a complex piece of

equipment and can be broken. Avoid dropping, hitting,

bending, or sitting on it.

Export Law Assurances (page 195)

Radio Frequency (RF) Energy (page 196)

Owner’s Record (page 198)

ⅷ

Any changes or modifications to your phone not expressly

approved in this document could void your warranty for this

equipment and void your authority to operate this

equipment.

Patent and Trademark Information (page 199)

Software Copyright Notice (page 199)

Privacy and Data Security (page 200)

Smart Practices While Driving (page 200)

For the best care of your phone, only authorized personnel

should service your phone and accessories. Failure to do

so may be dangerous and void your warranty.

Note

This phone guide contains important operational and safety

information that will help you safely use your phone. Failure to

read and follow the information provided in this phone guide

may result in serious bodily injury, death, or property damage.

188

Following Safety Guidelines

Maintaining Safe Use of and Access

to Your Phone

To operate your phone safely and efficiently, always follow any

special regulations in a given area. Turn your phone off in areas

where use is forbidden or when it may cause interference or

danger.

Do Not Rely on Your Phone for Emergency Calls

Using Your Phone Near Other Electronic Devices

Mobile phones operate using radio signals, which cannot

guarantee connection in all conditions. Therefore you should

never rely solely upon any mobile phone for essential

communication (e.g., medical emergencies). Emergency calls

may not be possible on all cellular networks or when certain

network services or mobile phone features are in use. Check

with your local service provider for details.

Most modern electronic equipment is shielded from radio

frequency (RF) signals. However, RF signals from wireless

phones may affect inadequately shielded electronic

equipment.

RF signals may affect improperly installed or inadequately

shielded electronic operating systems or entertainment

systems in motor vehicles. Check with the manufacturer or their

representative to determine if these systems are adequately

shielded from external RF signals. Also check with the

manufacturer regarding any equipment that has been added to

your vehicle.

Using Your Phone While Driving

Talking on your phone while driving (or operating the phone

without a hands-free device) is prohibited in some jurisdictions.

Laws vary as to specific restrictions. Remember that safety

always comes first.

Consult the manufacturer of any personal medical devices,

such as pacemakers and hearing aids, to determine if they are

adequately shielded from external RF signals.

Responsible driving practices can be found in “Smart Practices

While Driving” on page 200 and/or at the Motorola Web site:

www.motorola.com/callsmart.

Purchase an optional hands-free accessory at your local

Sprint Store, or call Nextel at 1-866-866-7509.

Tip

189

Operational Precautions

When using your radio product as a traditional

two-way radio, hold the radio product in a

vertical position with the microphone one to

two inches (2.5 to 5 cm) away from the lips.

Always turn off the phone in healthcare facilities, and

Note

request permission before using the phone near medical

equipment.

If you wear a radio product on your body when

transmitting, always place the radio product in

To assure optimal radio product performance and to be sure

that human exposure to RF does not exceed the guidelines set

forth in the relevant standards, always follow these instructions

and precautions:

a Motorola approved clip, holder, holster, case or body harness.

If you do not use a body-worn accessory supplied or approved

by Motorola and are not using the radio product in the intended

use positions along side the head in the phone mode or in

front of the face in the two-way radio mode, or if you hang your

device from a lanyard around your neck, keep the device at

least 2.5 centimeters (1 inch) from your body when transmitting.

Phone Operation

When placing or receiving a phone call, hold your radio

product as you would a wireline telephone. Speak directly into

the microphone.

Approved Accessories

Two-way radio operation

For a list of approved Motorola accessories call

1-800-453-0920, or visit our website at

www.motorola.com/support.

Your radio product has been designed and tested to comply

with national and international standards and guidelines

regarding human exposure to RF electromagnetic energy,

when operated in the two-way mode (at the face, or at the

abdomen when using an audio accessory) at usage factors of

up to 50% talk/50% listen.

Turning Off Your Phone Before Flying

Turn off your phone before boarding any aircraft. To prevent

possible interference with aircraft systems, the U.S. Federal

Aviation Administration (FAA) regulations require you to have

permission from a crew member to use your phone while the

plane is on the ground. To prevent any risk of interference, FCC

regulations prohibit using your phone while the plane is in the

air.

Transmit no more than the rated duty factor of 50% of the time.

To transmit (talk), push the PTT button. To receive calls, release

the PTT button. Transmitting 50% of the time or less, is

important because this radio generates measurable RF energy

only when transmitting (in terms of measuring for standards

compliance).

190

Turning Off Your Phone in Dangerous Areas

Using Your Phone With a Hearing

Aid Device

To avoid interfering with blasting operations, turn your phone

off when in a blasting area or in other areas with signs

indicating two-way radios should be turned off. Construction

crews often use remote-control RF devices to set off explosives.

A number of Nextel phones have been tested for hearing aid

device compatibility. When some wireless phones are used

with certain hearing devices (including hearing aids and

cochlear implants), users may detect a noise which can

interfere with the effectiveness of the hearing device.

Turn your phone off when you’re in any area that has a

potentially explosive atmosphere. Although it’s rare, your phone

and accessories could generate sparks. Sparks can cause an

explosion or fire, resulting in bodily injury or even death. These

areas are often, but not always, clearly marked. They include:

Some hearing devices are more immune than others to this

interference noise, and phones also vary in the amount of

interference noise they may generate. ANSI standard C63.19

was developed to provide a standardized means of measuring

both wireless phone and hearing devices to determine usability

rating categories for both.

Ⅲ Fueling areas such as gas stations.

Ⅲ Below deck on boats.

Ⅲ Fuel or chemical transfer or storage facilities.

Ⅲ Areas where the air contains chemicals or particles such

as grain, dust, or metal powders.

Ⅲ Any other area where you would normally be advised to

turn off your vehicle’s engine.

Ratings have been developed for mobile phones to assist

hearing device users find phones that may be compatible with

their hearing device. Not all phones have been rated for

compatibility with hearing devices. Phones that have been

rated have a label with the rating(s) located on the box, and are

listed at www.motorola.com/accessibility.

Never transport or store flammable gas, flammable liquids,

or explosives in the compartment of your vehicle that

Note

contains your phone or accessories.

Restricting Children’s Access to Your Phone

These ratings are not guarantees. Results will vary depending

on the user’s hearing device and individual type and degree of

hearing loss. If a hearing device is particularly vulnerable to

interference noise; even a phone with a higher rating may still

cause unacceptable noise levels in the hearing device. Trying

Your phone is not a toy. Do not allow children to play with it as

they could hurt themselves and others, damage the phone or

make calls that increase your invoice.

191

out the phone with your hearing device is the best way to

evaluate it for your personal needs.

find the one that works best with your hearing aid device.

Should you experience interference or find the quality of

service unsatisfactory after purchasing your phone, promptly

return it to the store within 30 days of purchase. With the Sprint

30-day Risk-Free Guarantee, you may return the phone within

30 days of purchase for a full refund. More information about

hearing aid compatibility may be found at:

M-Ratings: Phones rated M3 or M4 meet FCC requirements for

hearing aid compatibility and are likely to generate less

interference to hearing devices than unrated phones. (M4 is the

better/higher of the two ratings.)

T-Ratings: Phones rated T3 or T4 meet FCC requirements and

are likely to be more usable with a hearing device’s telecoil (“T

Switch”or “Telephone Switch”) than unrated phones. (T4 is the

better/higher of the two ratings. Note that not all hearing

devices have telecoils in them.)

www.motorola.com/accessibility, www.fcc.gov, www.fda.gov,

and www.accesswireless.org.

Getting the Best Hearing Device

Experience With Your Phone

To further minimize interference:

Hearing aid devices may also be measured for immunity to

interference noise from wireless phones and should have

ratings similar to phones. Ask your hearing health care

professional for the rating of your hearing aid. Add the rating of

your hearing aid and your phone to determine probable

usability:

ⅷ

Set the phone’s display and keypad backlight settings to

ensure the minimum time interval:

1. Press s> Settings > Display/Info > Backlight > Timer or

Java Timer.

ⅷ

Any combined rating equal to or greater than six offers

excellent use.

2. Select the minimum time interval setting and press OK.

ⅷ

Any combined rating equal to five is considered normal use.

Any combined rating equal to four is considered usable.

ⅷ

Position the phone so the internal antenna is farthest from

your hearing aid.

Move the phone around to find the point with least

interference.

Thus, if you pair an M3 hearing aid with an M3 phone, you will

have a combined rating of six for “excellent use.”This is

synonymous for T ratings.

Nextel further suggests you experiment with multiple phones

(even those not labeled M3/T3 or M4/T4) while in the store to

192

Caring for the Environment by

Recycling

Caring for the Battery

Protecting Your Battery

The guidelines listed below help you get the most out of your

battery’s performance.

This symbol on a Motorola product means the product

should not be disposed of with household waste.

ⅷ

Recently there have been some public reports of wireless

phone batteries overheating, catching fire, or exploding. It

appears that many, if not all, of these reports involve

counterfeit or inexpensive, aftermarket-brand batteries with

unknown or questionable manufacturing standards. Nextel is

not aware of similar problems with Nextel phones resulting

from the proper use of batteries and accessories approved

by Nextel or the manufacturer of your phone. Use only

Nextel-approved or manufacturer-approved batteries and

accessories found at Sprint Stores or through your phone’s

manufacturer, or call 1-866-866-7509 to order. They’re also

available at www.nextel.com — click Accessories. Buying the

right batteries and accessories is the best way to ensure

they’re genuine and safe.

In order to avoid damage, charge the battery only in

temperatures that range from 32° F to 113° F (0° C to 45° C).

Don’t use the battery charger in direct sunlight or in high

humidity areas, such as the bathroom.

Never dispose of the battery by incineration.

Disposal of your Mobile Device and Accessories

Please do not dispose of mobile devices or electrical

accessories (such as chargers, headsets, or batteries) with

your household waste. These items should be disposed of in

accordance with the national collection and recycling schemes

operated by your local or regional authority. Alternatively, you

may return unwanted mobile devices and electrical

accessories to any Motorola Approved Service Center in your

region. Details of Motorola approved national recycling

schemes, and further information on Motorola recycling

activities can be found at: www.motorola.com/recycling.

ⅷ

Disposal of your Mobile Device Packaging and User’s

Guide

Product packaging and user’s guides should only be disposed

of in accordance with national collection and recycling

requirements. Please contact your regional authorities for more

details.

ⅷ

Keep the metal contacts on top of the battery clean.

Don’t attempt to disassemble or short-circuit the battery.

The battery may need recharging if it has not been used for

a long period of time.

193

ⅷ

It’s best to replace the battery when it no longer provides

acceptable performance. It can be recharged hundreds of

times before it needs replacing.

Don’t store the battery in high temperature areas for long

periods of time. It’s best to follow these storage rules:

Batteries and Chargers

Your battery, charger, or portable radio may contain symbols,

defined as follows:

Symbol

Definition

Less than one month:

-4° F to 140° F (-20° C to 60° C)

More than one month:

-4° F to 113° F (-20° C to 45° C)

032374o

Important safety information follows.

Disposal of Lithium Ion (Li-Ion) Batteries

Do not dispose of your battery or

phone in a fire.

032376o

Do not handle a damaged or leaking Li-Ion battery as you can

be burned.

Your battery or phone may require

recycling in accordance with local

laws. Contact your local regulatory

authorities for more information.

For safe disposal options of your Li-Ion batteries, contact your

nearest authorized service center.

032375o

Special Note: Be sure to dispose of your battery properly. In

some areas, the disposal of batteries in household or business

trash may be prohibited.

Do not throw your battery or phone

in the trash.

Your phone contains an internal

lithium ion battery.

Li Ion BATT

032378o

Do not let your battery, charger, or

phone get wet.

Listening at full volume to music or

voice through a headset may

damage your hearing.

194

Choking Hazards

Caution About High Volume Usage

Listening at full volume to music or voice through a

Your portable radio or its accessories may include detachable

parts, which may present a choking hazard to small children.

Keep your device and its accessories away from small children.

headset may damage your hearing.

Repetitive Motion

Glass Parts

When you repetitively perform actions such as

pressing keys or entering finger-written characters, you may

experience occasional discomfort in your hands, arms,

shoulders, neck, or other parts of your body. If you continue to

have discomfort during or after such use, stop use and see a

physician.

Some parts of your phone may be made of glass. This glass

could break if the product is dropped on a hard surface or

receives a substantial impact. If glass breaks, do not touch or

attempt to remove. Stop using your phone until the glass is

replaced by a qualified service center.

Seizures/Blackouts

Export Law Assurances

Some people may be susceptible to epileptic seizures or

blackouts when exposed to flashing lights, such as when

playing video games. These may occur even if a person has

never had a previous seizure or blackout.

This product is controlled under the export regulations of the

United States of America and Canada. The Governments of the

United States of America and Canada may restrict the

exportation or re-exportation of this product to certain

destinations. For further information contact the U.S.

Department of Commerce or the Canadian Department of

Foreign Affairs and International Trade

If you have experienced seizures or blackouts, or if you have a

family history of such occurrences, please consult with your

physician before playing video games or enabling a flashing-

lights feature (if available) on your phone.

Discontinue use and consult a physician if any of the following

symptoms occur: convulsion, eye or muscle twitching, loss of

awareness, involuntary movements, or disorientation. It is

always a good idea to hold the screen away from your eyes,

leave the lights on in the room, take a 15-minute break every

hour, and stop use if you are very tired.

195

Body-Worn Operation

Radio Frequency (RF) Energy

To maintain compliance with FCC RF exposure guidelines, if

you wear a handset on your body, use the Motorola supplied or

approved carrying case, holster or other body-worn accessory.

If you do not use a body-worn accessory, ensure the antenna is

at least 2.5 centimeters from your body when transmitting. Use

of non-Motorola-approved accessories may violate FCC RF

exposure guidelines.

Understanding How Your Phone Operates

Your phone contains a transmitter and receiver. When it is ON,

it receives and transmits RF energy. When you communicate

with your phone, the system handling your call controls the

power level at which your phone transmits.

Your Motorola phone is designed to comply with local

regulatory requirements in your country concerning exposure

of human beings to RF energy.

Your Motorola phone is designed to comply with local

regulatory requirements in your country concerning exposure

of human beings to RF energy.

For more information about RF exposure, visit the FCC Web

site at www.fcc.gov.

Knowing Radio Frequency Safety

The design of your phone complies with updated NCRP standards

described below.

Portable Radio Product Operation and EME Exposure

ⅷ

Your Motorola radio product is designed to comply with the

following national and international standards and guidelines

regarding exposure of human beings to radio frequency

electromagnetic energy (EME):

In 1991–92, the Institute of Electrical and Electronics Engineers

(IEEE) and the American National Standards Institute (ANSI) joined

in updating ANSI’s 1982 standard for safety levels with respect to

human exposure to RF signals. More than 120 scientists, engineers

and physicians from universities, government health agencies and

industries developed this updated standard after reviewing the

available body of research. In 1993, the Federal Communications

Commission (FCC) adopted this updated standard in a regulation.

In August 1996, the FCC adopted hybrid standard consisting of the

existing ANSI/IEEE standard and the guidelines published by the

National Council of Radiation Protection and Measurements

(NCRP).

ⅷ

United States Federal Communications Commission, Code

of Federal Regulations; 47 CFR part 2 sub-part J.

American National Standards Institute (ANSI) / Institute of

Electrical and Electronics Engineers (IEEE). C95. 1-1992.

196

ⅷ

Institute of Electrical and Electronics Engineers (IEEE). C95.

1-2005 Edition.¹

International Commission on Non-Ionizing Radiation

Protection (ICNIRP) 1998.

Ministry of Health (Canada). Safety Code 6. Limits of Human

Exposure to Radio frequency Electromagnetic Fields in the

Frequency Range from 3 kHz to 300 GHz, 1999.

Australian Communications Authority Radio

communications (Electromagnetic Radiation - Human

Exposure) Standard 2003.

ANATEL, Brazil Regulatory Authority, Resolution 303 (July 2,

2002) "Regulation of the limitation of exposure to electrical,

magnetic, and electromagnetic fields in the radio frequency

range between 9 kHz and 300 GHz." "Attachment to

Resolution 303 from July 2, 2002."

Communications Commission of the U.S. Government. These

limits are part of comprehensive guidelines and establish

permitted levels of RF energy for the general population. The

guidelines are based on standards that were developed by

independent scientific organizations through periodic and

thorough evaluation of scientific studies. The standards include

a substantial safety margin designed to assure the safety of all

persons, regardless of age and health.

ⅷ

The exposure standard for wireless mobile phones employs a

unit of measurement known as the Specific Absorption Rate, or

SAR. The SAR limit set by the FCC is 1.6W/kg.²Tests for SAR

are conducted using standard operating positions reviewed by

the FCC with the phone transmitting at its highest certified

power level in all tested frequency bands. Although the SAR is

determined at the highest certified power level, the actual SAR

level of the phone while operating can be well below the

maximum value. This is because the phone is designed to

operate at multiple power levels so as to use only the power

Specific Absorption Rates (SAR) for Wireless

Phones

Exposure to Radio Waves:

Your wireless phone is a radio transmitter and receiver. It is

designed and manufactured not to exceed the emission limits

for exposure to radio frequency (RF) energy set by the Federal

2.In the United States and Canada, the SAR limit for mobile

phones used by the public is 1.6 watts/kg (W/kg) averaged

over one gram of tissue. The standard incorporates a

substantial margin of safety to give additional protection for

the public and to account for any variations in

measurements.

1.The information provided in this document supersedes the

general safety information in user’s guides published prior to

May 1, 2006

197

required to reach the network. In general, the closer you are to

a wireless base station antenna, the lower the power output.

Canadian Wireless Telecommunications Association (CWTA)

Web site: http://www.cwta.ca.

Before a phone model is available for sale to the public, it must

be tested and certified to the FCC that is does not exceed the

limit established by the government-adopted requirement for

safe exposure. The tests are performed in positions and

locations (e.g., at the ear and worn on the body) as required by

the FCC for each model. The highest SAR value for this model

phone when tested for use at the ear is 1.45 W/kg and when

tested on the body, as described in this user guide, is

1.35 W/kg during packet data transmission. (Body-worn

measurements differ among phone models, depending upon

available accessories and FCC requirements.)¹

Owner’s Record

The model number, regulatory number, and serial number are

located on a nameplate inside the battery compartment.

Record the serial number in the space provided below. This will

be helpful if you need to contact us about your phone in the

future.

Model: i576

Serial No.:

While there may be differences between the SAR levels of

various phones and at various positions, they all meet the

government requirement for safe exposure. Please note that

improvements to this product model could cause differences in

the SAR value for later products; in all cases, products are

designed to be within the guidelines.

Online Product Registration:

http://www.motorola.com/us/productregistration

Product registration is an important step toward enjoying your

new Motorola product. Registration permits us to contact you

for product or software updates and allows you to subscribe to

updates on new products or special promotions. Registration is

not required for warranty coverage. Please retain your original

dated sales receipt, as you may need to provide it for warranty

validation in the future.

Additional information on Specific Absorption Rates (SAR) can

be found on the Cellular Telecommunications Industry

Association (CTIA) web-site at http://www.ctia.org or the

1.The SAR information includes the Motorola testing

protocol, assessment procedure, and measurement

uncertainty range for this product.

Thank you for choosing a Motorola product.

198

Patent and Trademark Information

Software Copyright Notice

MOTOROLA, the Stylized M Logo and all other trademarks

indicated as such herein are trademarks of Motorola, Inc. ®

reserved.

The Motorola products described in this manual may include

copyrighted Motorola and third party software stored in

semiconductor memories or other media. Laws in the United

States and other countries preserve for Motorola and third party

software providers certain exclusive rights for copyrighted

software, such as the exclusive rights to distribute or reproduce

the copyrighted software. Accordingly, any copyrighted

software contained in the Motorola products may not be

modified, reverse-engineered, distributed, or reproduced in any

manner to the extent allowed by law. Furthermore, the

purchase of the Motorola products shall not be deemed to

grant either directly or by implication, estoppel, or otherwise,

any license under the copyrights, patents, or patent

Microsoft and Microsoft Internet Explorer are registered

trademarks of Microsoft Corporation.

T9 is a trademark owned by Tegic Communications.

T9® Text Input Patent and Trademark Information.

This product is covered by U.S. Pat. 5,818,437, U.S. Pat.

5,953,541, U.S. Pat. 6,011,554 and other patents pending.

Java and all other Java-based marks are trademarks or

registered trademarks of Sun Microsystems, Inc. in the U.S. and

other countries.

applications of Motorola or any third party software provider,

except for the normal, non-exclusive, royalty-free license to use

that arises by operation of law in the sale of a product.

All other product names or services mentioned in this manual

are the property of their respective trademark owners.

199

If you have further questions regarding how use of your phone

may impact your privacy or data security, please contact

Motorola.

Privacy and Data Security

Motorola understands that privacy and data security are

important to everyone. Because some features of your phone

may affect your privacy or data security, please follow these

recommendations to enhance protection of your information:

Smart Practices While Driving

Drive Safe, Call Smart ^SM

ⅷ

Monitor access: Keep your phone with you and do not leave

it where others may have unmonitored access. Lock your

device’s keypad where this feature is available.

Keep software up to date: If Motorola or a software/

application vendor releases a patch or software fix for your

phone which updates the device’s security, install it as soon

as possible.

Check the laws and regulations on the use of mobile devices

and their accessories in the areas where you drive. Always

obey them. The use of these devices may be prohibited or

restricted in certain areas. Contact www.motorola.com/callsmart

for more information.

ⅷ

Erase before recycling: Delete personal information or data

from your phone prior to disposing of it or turning it in for

recycling. For step-by-step instructions on how to delete all

personal information from your device, please contact your

local service provider.

Understanding AGPS: In order to comply with emergency

caller location requirements of the FCC, certain Motorola

phones incorporate Assisted Global Positioning System

(AGPS) technology. AGPS technology also can be used in

non-emergency applications to track and monitor a user’s

location, for example, to provide driving directions. Users

who prefer not to permit such tracking and monitoring

should avoid using such applications.

Your mobile device lets you communicate by voice and data—

almost anywhere, anytime, wherever wireless service is

available and safe conditions allow. When driving a car, driving

is your first responsibility. If you choose to use your mobile

device while driving, remember the following tips:

ⅷ

Get to know your Motorola phone and its features such as

speed dial and redial. If available, these features help you to

place your call without taking your attention off the road.

ⅷ

When available, use a hands-free device. If possible, add an

additional layer of convenience to your phone with one of the

many Motorola Original hands-free accessories available

today.

ⅷ

Position your phone within easy reach. Be able to access

your phone without removing your eyes from the road. If you

200

receive an incoming call at an inconvenient time, if possible,

let your voice mail answer it for you.

assistance or other special non-emergency wireless

number.*

ⅷ

Let the person you are speaking with know you are driving; if

necessary, suspend the call in heavy traffic or hazardous

weather conditions. Rain, sleet, snow, ice, and even heavy

traffic can be hazardous.

Do not take notes or look up phone numbers while driving.

Jotting down a “to do” list or going through your address

book takes attention away from your primary responsibility,

driving safely.

Dial sensibly and assess the traffic; if possible, place calls

when your car is not moving or before pulling into traffic. If

you must make a call while moving, dial only a few numbers,

check the road and your mirrors, then continue.

Do not engage in stressful or emotional conversations that

may be distracting. Make people you are talking with aware

you are driving and suspend conversations that can divert

your attention away from the road.

* Wherever wireless phone service is available

ⅷ

Use your phone to call for help. Dial 911 or other local

emergency number in the case of fire, traffic accident, or

medical emergencies.*

Use your phone to help others in emergencies. If you see an

auto accident, crime in progress, or other serious emergency

where lives are in danger, call 911 or other local emergency

number, as you would want others to do for you.*

ⅷ

Call roadside assistance or a special non-emergency

wireless assistance number when necessary. If you see a

broken-down vehicle posing no serious hazard, a broken

traffic signal, a minor traffic accident where no one appears

injured, or a vehicle you know to be stolen, call roadside

Manufacturer’s Warranty (page 202)

201

Section 4B

Motorola Limited Warranty

for the United States and Canada

Manufacturer’s Warranty

What does this Warranty Cover?

ࡗ

Service and Repairs (page 207)

Subject to the exclusions contained below, Motorola,

Inc. warrants its telephones, pagers, messaging

devices, and consumer and professional two-way

radios (excluding commercial, government or industrial

radios) that operate via Family Radio Service or

General Mobile Radio Service, Motorola-branded or

certified accessories sold for use with these Products

(“Accessories”) and Motorola software contained on

CD-ROMs or other tangible media and sold for use

with these Products (“Software”) to be free from defects

in materials and workmanship under normal consumer

usage for the period(s) outlined below. This limited

warranty is a consumer's exclusive remedy, and

applies as follows to new Motorola Products,

ࡗ

Your phone has been designed to provide you with reliable,

worry-free service. If for any reason you have a problem

with your equipment, please refer to the manufacturer’s

warranty in this section.

For information regarding the terms and conditions of

service for your phone, please visit www.nextel.com or

call Nextel Customer Service at 1-800-639-6111.

Accessories and Software purchased by consumers in

the United States or Canada, which are accompanied

by this written warranty:

202

Products and Accessories

Products Covered

Length of Coverage

Products and

Accessories that are

Repaired or

The balance of the original

warranty or for ninety (90) days

from the date returned to the

consumer, whichever is longer.

Products Covered

Length of Coverage

Products and

One (1) year from the date of

purchase by the first

consumer purchaser of the

product unless otherwise

provided for below.

Accessories as

defined above,

unless otherwise

provided for below.

Replaced.

Exclusions

Normal Wear and Tear. Periodic maintenance, repair

and replacement of parts due to normal wear and tear

are excluded from coverage.

Decorative

Limited lifetime warranty for the

lifetime of ownership by the first

consumer purchaser of the

product.

Accessories and

Cases. Decorative

covers, bezels,

PhoneWrap™ covers

and cases.

Batteries. Only batteries whose fully charged capacity

falls below 80% of their rated capacity and batteries

that leak are covered by this limited warranty.

Monaural Headsets.

Ear buds and boom

headsets that

transmit mono sound

through a wired

connection.

Limited lifetime warranty for the

lifetime of ownership by the first

consumer purchaser of the

product.

Abuse & Misuse. Defects or damage that result from:

(a) improper operation, storage, misuse or abuse,

accident or neglect, such as physical damage (cracks,

scratches, etc.) to the surface of the product resulting

from misuse; (b) contact with liquid, water, rain, extreme

humidity or heavy perspiration, sand, dirt or the like,

extreme heat, or food; (c) use of the Products or

Accessories for commercial purposes or subjecting the

Product or Accessory to abnormal usage or conditions;

Consumer and

Professional

Two-Way Radio

Accessories.

Ninety (90) days from the date of

purchase by the first consumer

purchaser of the product.

203

or (d) other acts which are not the fault of Motorola, are

excluded from coverage.

or use with the Products Accessories or Software is

excluded from coverage.

Use of Non-Motorola Products and Accessories.

Defects or damage that result from the use of

Non-Motorola branded or certified Products,

Accessories, Software or other peripheral equipment

are excluded from coverage.

Software

Products Covered

Length of Coverage

Ninety (90) days from

the date of purchase.

Software.Applies only to

physical defects in the media

that embodies the copy of the

software (e.g. CD-ROM, or

floppy disk).

Unauthorized Service or Modification. Defects or

damages resulting from service, testing, adjustment,

installation, maintenance, alteration, or modification in

any way by someone other than Motorola, or its

authorized service centers, are excluded from

coverage.

Exclusions

Software Embodied in Physical Media. No warranty is

made that the software will meet your requirements or

will work in combination with any hardware or software

applications provided by third parties, that the operation

of the software products will be uninterrupted or error

free, or that all defects in the software products will be

corrected.

Altered Products. Products or Accessories with (a)

serial numbers or date tags that have been removed,

altered or obliterated; (b) broken seals or that show

evidence of tampering; (c) mismatched board serial

numbers; or (d) nonconforming or non-Motorola

housings, or parts, are excluded from coverage.

Communication Services. Defects, damages, or the

failure of Products, Accessories or Software due to any

communication service or signal you may subscribe to

Software NOT Embodied in Physical Media. Software

that is not embodied in physical media (e.g. software

that is downloaded from the internet), is provided “as

is” and without warranty.

204

Who Is Covered?

How to Obtain Warranty Service or Other

Information

This warranty extends only to the first consumer

purchaser, and is not transferable.

USA

Phones

What Will Motorola Do?

1-800-453-0920

1-877-483-2840

TTY

Motorola, at its option, will at no charge repair, replace

or refund the purchase price of any Products,

Accessories or Software that does not conform to this

warranty. We may use functionally equivalent

For Accessories and Software, please call the

telephone number designated above for the product

with which they are used

reconditioned/refurbished/pre-owned or new Products,

Accessories or parts. No data, software or applications

added to your Product, Accessory or Software,

including but not limited to personal contacts, games

and ringer tones, will be reinstalled. To avoid losing

such data, software and applications please create a

back up prior to requesting service.

You will receive instructions on how to ship the

Products, Accessories or Software, at your expense, to

a Motorola Authorized Repair Center. To obtain service,

you must include: (a) a copy of your receipt, bill of sale

or other comparable proof of purchase; (b) a written

description of the problem; (c) the name of your

service provider, if applicable; (d) the name and

location of the installation facility (if applicable) and,

most importantly; (e) your address and telephone

number.

205

TO THE FULL EXTENT THESE DAMAGES MAY BE

DISCLAIMED BY LAW.

What other limitations are there?

ANY IMPLIED WARRANTIES, INCLUDING WITHOUT

LIMITATION THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE, SHALL BE LIMITED TO THE

DURATION OF THIS LIMITED WARRANTY,

Some states and jurisdictions do not allow the limitation or

exclusion of incidental or consequential damages, or limitation

on the length of an implied warranty, so the above limitations or

exclusions may not apply to you. This warranty gives you

specific legal rights, and you may also have other rights that vary

from state to state or from one jurisdiction to another.

OTHERWISE THE REPAIR, REPLACEMENT, OR

REFUND AS PROVIDED UNDER THIS EXPRESS

LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF

THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL

OTHER WARRANTIES, EXPRESS OR IMPLIED. IN NO

EVENT SHALL MOTOROLA BE LIABLE, WHETHER IN

CONTRACT OR TORT (INCLUDING NEGLIGENCE)

FOR DAMAGES IN EXCESS OF THE PURCHASE

PRICE OF THE PRODUCT, ACCESSORY OR

SOFTWARE, OR FOR ANY INDIRECT, INCIDENTAL,

SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY

KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF

BUSINESS, LOSS OF INFORMATION OR DATA,

SOFTWARE OR APPLICATIONS OR OTHER

Laws in the United States and other countries preserve

for Motorola certain exclusive rights for copyrighted

Motorola software such as the exclusive rights to

reproduce and distribute copies of the Motorola

software. Motorola software may only be copied into,

used in, and redistributed with, the Products associated

with such Motorola software. No other use, including

without limitation disassembly of such Motorola

software or exercise of the exclusive rights reserved for

Motorola, is permitted.

FINANCIAL LOSS ARISING OUT OF OR IN

CONNECTION WITH THE ABILITY OR INABILITY TO

USE THE PRODUCTS, ACCESSORIES OR SOFTWARE

206

Service and Repairs

If you have questions or need assistance, we’re here to

help.

Go to www.motorola.com/support, where you can select

from a number of customer care options. You can also

contact the Motorola Customer Support Center at

1-800-453-0920 (United States), 1-877-483-2840

(TTY/TDD United States for hearing impaired).