Motorola EB GD70 User Manual

Operating Instructions  
Digital Cellular Telephone  
EB-GD70  
Main Kit  
Before operating this equipment please read these instructions completely.  
Contents  
Before You Start . . . . . . . . . . . . . . . . 1 Additional Features. . . . . . . . . . . . . . 22  
Symbols Used, Safety Information,  
Fitting/Removing the SIM, Fitting/Removing the Battery  
Key Guard, Phonebook, Messages, Call Service,  
Call Divert, Security, Network, Personalise  
Your Telephone . . . . . . . . . . . . . . . . 4 Battery Information. . . . . . . . . . . . . . 28  
Location of Controls, Display  
Low Battery, Charging the Battery  
Basic Operation . . . . . . . . . . . . . . . . 6 Care and Maintenance . . . . . . . . . . . . 29  
Power on/off, Making a Call, Ending a Call,  
Other Information . . . . . . . . . . . . . . 30  
Answering a Call, Adjusting Volume, Vibration Alert,  
Glossary of Terms, Trouble Shooting,  
Automatic Redial  
Important Error Messages  
Advanced Operation . . . . . . . . . . . . . 10  
Specifications . . . . . . . . . . . . . . . . . 35  
Concept of Operation, Desktop Handsfree, Voice Memo,  
DTMF Tones, Call Hold/Call Waiting  
Stored Numbers. . . . . . . . . . . . . . . . 15  
Note Pad, Recent Numbers, Phonebook, Fixed Dial,  
Service Numbers, Hot Key Telephone Numbers  
Alpha Entry . . . . . . . . . . . . . . . . . . 21  
Editing Alpha Entry  
1
Before You Start  
Thank you for purchasing this Panasonic GD70 digital cellular telephone. This telephone is designed to operate on  
the Global System for Mobile Communications (GSM), GSM900 or GSM1800.  
These operating instructions detail use of the equipment contained in the Main Kit.  
Some services are network dependent or may only be available on a subscription basis. Some functions are SIM  
dependent. For more information contact your Service Provider.  
Symbols Used  
F Shows that you should press the following key(s).  
,Text- Shows that the display text will be flashing.  
Shows that the information is a Quick Tip.  
Safety Information  
This equipment is intended for use when supplied with power from the built-in charger or Dual Charger  
(EB-CRD70) through the AC Adaptor (EB-CAD70). Other usage will invalidate any approval given to this  
apparatus and may be dangerous.The use of approved accessories is recommended to ensure optimum  
performance and avoid damage to your telephone.  
Switch off your cellular telephone when in an aircraft. The use of cellular telephones in an aircraft may be  
dangerous to the operation of the aircraft, disrupt the cellular network and may be illegal. Failure to observe  
this instruction may lead to the suspension or denial of cellular telephone services to the offender, or legal  
action or both.  
 
You are advised not to use the equipment at a refuelling point. You are reminded of the need to observe  
restrictions on the use of radio equipment in fuel depots, chemical plants or where blasting operations are in  
progress. Never expose the battery pack to extreme temperatures (in excess of 60°C) or charge the battery  
pack for much longer than recommended.  
You MUST exercise proper control of your vehicle at all times. Do not use a hand held telephone or  
microphone while you are driving. Find a safe place to stop first. Do not speak into a hands free microphone  
if it will take your mind off the road. Acquaint yourself thoroughly with restrictions concerning the use of  
cellular telephones within the country you are driving and observe them at all times.  
Care must be taken when using the telephone in close proximity to personal medical devices, such as  
pacemakers and hearing aids.  
Do NOT hold the telephone to your ear in Handsfree mode.  
Fitting/Removing the SIM  
The SIM is fitted into a holder at the back of the telephone underneath the battery.  
Fitting the SIM  
Removing the SIM  
To remove the SIM follow the above steps in reverse.  
2
3
Fitting/Removing the Battery  
Fit a fully charged battery pack. If the battery pack is not fully charged then it must be charged as shown in  
“Charging the Battery” – see page 28.  
Fitting the Battery  
Removing the Battery  
Your Telephone  
Location of Controls  
g Navigation key – pressing up/down scrolls through  
options in the main area of the display or adjusts the  
volume. Pressing left/right scrolls through options in the  
option area of the display (see Display below)  
Incoming/charging  
indicator  
Antenna  
B Select key – selects an option in the option area of the  
display (see Display below)  
Speaker  
A – accesses Phonebook or switches character types  
Memo  
D – makes a call or recalls recently dialled telephone  
numbers  
Display  
C – clears the last digit entered, clears all digits when  
pressed and held or returns to the previous display  
E – ends a call or switches the telephone on/off when  
pressed and held  
Digit keys 0 to 9, * and # – the # key will switch on and  
off vibration alert  
: – Records a conversation during a call or plays it  
back during standby  
Microphone  
External  
connector  
4
 
5
Y lights when you are registered to a non-home network  
- roaming  
Display  
t lights when call divert is enabled  
] lights when vibration alert is enabled  
[ lights when all tones or ring volume is off  
N flashes when an unread message is stored or lights  
when message area is full  
Main area  
O lights when phone lock is enabled  
S indicates that it is possible to make emergency calls  
T indicates received signal strength - \weak  
signal, T strong signal  
Menu  
57  
H indicates the battery level - H full, L low  
battery  
p indicates that the Navigation key (g) can be  
pressed  
Location area - indicates Option area - shows options  
menu number, location  
that can be selected by B key  
number, or alpha mode  
Following some operations the display will automatically  
clear after three seconds or after pressing any key.  
 
Basic Operation  
Power on/off  
F E and hold to switch power on  
A greeting will be displayed.  
F E and hold to switch power off  
Making a Call  
Make sure that the telephone is switched on and the signal strength meter is displayed.  
1 F area code and telephone number  
00:01  
Voice Call  
2 F D  
Hold  
Emergency Calls  
To make an emergency call the antenna symbol (S) must be present.  
F 1 1 2 D or press B when “SOS” is displayed in the option area of the display  
6
 
7
International Dialling  
Using the Automatic International Access Code “+” you will be able to dial international numbers  
without having to know the code for the international exchange.  
1 F 0 and hold until a “+” appears  
Country:  
2 F country code or e to scroll through the abbreviated international  
names  
3 F area code and telephone number  
UK  
4 F D  
OK  
NOTE: Many countries include an initial “0” in the area code. This should, in most cases, be left out when dialling  
international numbers. If you have difficulties making international calls, contact your Service Provider.  
Ending a Call  
F E  
Answering a Call  
To receive a call the telephone must be switched on and the signal strength meter must be displayed.  
F any key except E or g  
Incoming  
F E to reject the call  
If a call is not answered the number of unanswered calls will be displayed.  
Accept  
F any key to clear the display  
Calling Line Identification  
This feature allows you to identify incoming calls and accept or reject them. The caller’s  
telephone number, and name if stored in Phonebook, will be displayed.  
Home  
NOTE: Call Line Identification may not always be available.  
+01234567  
Adjusting Volume  
Accept  
Earpiece Volume  
Four levels of earpiece volume are available.  
During a call:F a to decrease b to increase  
00:05  
Ear  
Volume  
Handsfree volume  
During handsfree operation F a to decrease b to increase the volume.  
Ring and Key Volume  
See “Ring Volume” – page 27 and “Key Volume” – page 27.  
Vibration Alert  
When vibration alert is switched on the telephone will vibrate when a call is received. Switching on  
vibration alert will silence the ring volume. However, when the ring volume is adjusted after the  
vibration alert is switched on, the telephone will ring and vibrate when a call is received.  
During standby:  
F # and hold to switch on or off. When switched on, the phone will  
vibrate briefly  
8
9
Automatic Redial  
When a call is unsuccessful the telephone will ask if you want to redial the telephone number again  
automatically.  
Auto Redial  
F B when “OK” is displayed in the option area  
00:32  
Auto Redial will countdown the display to the next redial  
To stop redialling, F B when “Cancel” is displayed in the option area  
Cancel  
If a call is repeatedly unsuccessful you will not be able to automatically redial the telephone number. In this case  
you must redial the telephone number manually.  
Advanced Operation  
Concept of Operation  
There is a close relationship between the select key,  
navigation key and the display.  
Pressing e scrolls through the main area of the display.  
Pressing f scrolls through options at the bottom right  
of the display. To choose the option, press B.  
Desktop Handsfree  
Desktop Handsfree allows you to hold a conference call, whereby more than one person can listen to the call at a time.  
NOTE: Do NOT hold the telephone to your ear in Handsfree mode. If the telephone is mounted in the optional Car  
Mount Kit, Handsfree is not available.  
Making a Handsfree call  
1 F area code and telephone number  
00:01  
Voice Call  
2 F D the option area will display “H’free”  
3 F B to activate Handsfree  
Reverting to a Handheld call  
1 F f to display “H’held” in the option area  
H`free  
2 F B reverts to Handheld  
NOTE: A warning tone will sound to indicate a change in audio mode from either Handheld to Handsfree or  
Handsfree to Handheld.  
10  
 
11  
Answering a call Handsfree  
F D and hold, will allow the call to be answered Handsfree.  
Voice Memo  
You can record a conversation for approximately 50 seconds during a call. If a different SIM is installed any  
recorded message will be lost.  
CAUTION: Security of a recorded message is your responsibility. You MUST ask for the other party’s consent  
before recording.  
Record  
F : during a call  
Two tones will sound when recording starts. Another two tones will sound, to the other party, every 15  
seconds. When the recording stops a tone will sound to you.  
F : while recording to restart  
Recording cannot be stopped once started.  
Play Back  
F : during standby.  
If there is no recording two tones will sound.  
To stop playing, press E  
Playback Handsfree  
F : and hold, during standby will allow handsfree operation of the telephone  
Erase  
F B twice during playing  
DTMF Tones  
DTMF tones can be sent during conversation. These are often used to access voice mail, paging and computerised  
home banking. For example, you may need to input a number to remotely access voice mail messages.  
Send DTMF Tones During a Call  
F digits (0 to 9, # and *)  
Pause Dial  
Using pauses allows you to send DTMF tones automatically.  
1 F telephone number  
+01234P5  
2 F 0 and hold until a “P” appears  
Menu  
3 F DTMF digits after the pause e.g. Enter the number to access voice  
mail messages. Repeat step 2 for more pauses.  
4 F D.  
When the call is successful DTMF tones will be sent every 3 seconds or when D is pressed  
Call Hold/Call Waiting  
Holding/Resuming a Call  
F B when “Hold” is displayed in the option area  
F B when “Resume” is displayed in the option area  
12  
13  
Making a Second Call  
1 F telephone number, or recall from Phonebook – see “Retrieving a Telephone Number” page 17  
2 F D  
The first call will be placed on hold.  
Receiving a Second Call  
A second call can be received, if call waiting is switched on – see “Call Service” page 24. It is not possible to have  
more than one fax or data call. All voice calls must be ended before you can make or receive a fax or data call.  
Accept a Second Call  
F B when “Accept” is displayed in the option area  
The current call will be placed on hold.  
Reject a Second Call  
1 F f to display “Reject” in the option area  
2 F B  
End Current Call and Receive Second Call  
1 F E with a waiting call  
2 F any key except E or g  
Operation During Two Calls  
Swap Between Calls  
00:34  
Held call  
F B when “Swap” is displayed in the option area  
End Current Call  
Home  
Voice Call  
Current call  
1 F f to display “End” in the option area  
2 F B  
2
Swap  
The held call will remain held.  
End Both Calls  
F E  
14  
15  
Stored Numbers  
Note Pad  
During a call you can enter numbers which you may wish to dial when the call has ended.  
During a call:F telephone number  
When the call has ended press D to call that number  
To store in Phonebook, press A while the number is displayed – see “Phonebook” page 22.  
Recent Numbers  
Recently dialled telephone numbers will be stored in “Last Dialled”.  
If Calling Line Identification is available the caller’s telephone number for an answered call will be stored in  
“Answered” and an unanswered call will be stored in “Unanswered”.  
When the store is full the next telephone number will overwrite the oldest.  
1 F D  
2 F e to point at “Last Dialled”, “Answered” or “Unanswered”  
3 F B  
4 F e to point at the telephone number (or name) you wish to dial  
You can store these telephone numbers into the Phonebook by pressing A  
5 F D  
You can edit or delete the telephone number before dialling – see “Phonebook/Recall” page 22.  
 
Calling the Last Dialled Number  
To redial your last called telephone number F D D  
Returning an Unanswered Call  
When the display shows that you have received calls but not answered them.  
1 F B  
The last caller’s telephone number will be displayed.  
2 F e to point at the telephone number you wish to dial  
3 F D  
Phonebook  
Telephone numbers are stored on your SIM. Therefore, the number of locations, length of name and number of  
telephone numbers that can be stored are dependant on your SIM.  
Storing a Telephone Number  
1 F telephone number  
2 F A  
The telephone number entered in step 1 will be displayed.  
3 Edit the displayed number if necessary  
4 F B to enter the telephone number  
5 F name – see “Alpha Entry” page 21  
6 F B to enter the name  
7 F location number if you do not want Automatic location  
16  
 
17  
Automatic Location  
The telephone number can be stored automatically at the first available location. This can  
be done instead of entering a location number.  
Location:  
(1-250)  
-
F B when “Any” is displayed in the option area of the display  
Any  
0-9  
Overwrite Protection  
If a location is occupied you will be asked if you wish to overwrite the current information.  
F B to overwrite the selected location  
Overwrite?  
Home  
F C to choose another location number  
(181)  
Ok  
Retrieving a Telephone Number  
1 F A  
2 F e to browse through the Phonebook  
You can browse through the Phonebook in the order that was last used by the “Phonebook” menu  
see page 22.  
The telephone number, or name, pointed can be dialled, recalled, edited or deleted.  
 
View  
This is used to review the telephone number and name together or just the name.  
F B when “View” is displayed in the option area  
Recall  
1 F f to display “Recall” in the option area  
Direct  
Home  
2 F B  
Dialling  
Work  
When the desired telephone number or name is displayed  
Recall  
20  
F D  
Editing  
1 F f to display “Edit” in the option area  
Direct  
Home  
2 F B  
3 F new telephone number  
4 F B  
Work  
Edit  
20  
5 F new name  
6 F B  
Deleting  
1 F f to display “Delete” in the option area  
2 F B twice  
18  
19  
Speed Dial a Stored Number  
1 F location number – leading zeros may be left out  
2 F #  
3 F D  
Fixed Dial  
The Fixed Dial Store is part of Phonebook, but with additional security. When the security feature Fixed Dial is  
switched on it is only possible to make calls with telephone numbers that are in the Fixed Dial Store.  
When Fixed Dial is switched on any manually dialled telephone numbers must match a telephone number in the  
Fixed Dial Store.  
To store, edit or delete a telephone number in the Fixed Dial Store “Fixed Dial” must be switched on – see “Security”  
page 25. With Fixed Dial switched on, all telephone numbers can be added, edited or deleted as normal, but you will  
be asked for PIN2 – see “Security” page 25.  
“Wild” Numbers  
Wild numbers are spaces that can be stored in a telephone number. The “wild” numbers must be filled before the  
telephone number is dialled. In this way a call can be restricted to a specific area by storing the area code of a  
telephone and when recalled the remainder can be added. The “wild” numbers can be anywhere within a stored  
telephone number.  
F 0 and hold until “_” appears to enter a wild number  
When the telephone number is recalled pressing a numeric key will fill in a “wild” number.  
+0123_45_  
Menu  
 
Service Numbers  
Your Service Provider may program some special telephone numbers into the Service Dial area of the Phonebook.  
It is not possible to modify the telephone numbers stored in the Service Dial part of the Phonebook.  
F A and hold  
F g to browse through the Service Dial list of telephone numbers  
The telephone number pointed to can only be recalled or dialled.  
Hot Key Telephone Numbers  
It is possible to dial telephone numbers from the Phonebook or Service Dial part of Phonebook very quickly. Some  
Hot Key telephone numbers may be reserved by the Service Provider, for example the first three Hot Key telephone  
numbers may be linked to the Service Dial part of the Phonebook. To select a source for the Hot Key telephone  
numbers see “Personalise” – page 27.  
F 1 to 9 and hold  
F D  
20  
 
21  
Alpha Entry  
Alpha Entry is used to enter alphanumeric characters into Phonebook, Short Messages, Price Per Unit and the  
Greeting Message.  
Key  
Character entry type  
Key  
Character entry type  
Normal  
(U)  
Greek  
(V)  
Extended  
(W)  
Normal  
(U)  
Greek  
(V)  
Extended  
(W)  
MNÑOÖØmnñoöøò  
PQRSpqrsß  
1
2
3
4
5
6
7
8
9
Space“@,.;:!¡?¿()’&%+-/<>=£$¥¤§  
MNOmno  
ΝΞΟ  
ABCabc  
DEFdef  
GHIghi  
JKLjkl  
ΑΒΓ  
ΕΖ  
ΗΘΙ  
AÄÅÆBCÇaäåæàbc  
DEÉFdeéèf  
GHIghiì  
PQRSpqrs ΠΡΣ  
TUVtuv ΤΥΦ  
WXYZwxyz ΧΨΩ  
TUÜVtuüùv  
WXYZwxyz  
ΚΛΜ  
JKLjkl  
Each time a key is pressed it will display the next character. When another key is pressed or no key is pressed for a  
short time the cursor will move to the next position.  
To access the different character types, normal (U), numerals (X), Greek characters (V) and extended  
characters (W) press A.  
Editing Alpha Entry  
Pressing e will move you up or down one line. Pressing f will move you left or right one character.When the  
cursor is moved over a character and another key pressed this will insert the new character. Pressing C will  
delete the character to the left of the cursor or delete the current line when pressed and held.  
 
Additional Features  
When the word “Menu” is in the option area of the display Phonebook  
pressing the B will display a menu of telephone features.  
To select a feature press e so that the pointer is showing  
next to the feature that you require then press B.  
Phonebook  
Browse  
Create  
Review  
A quick way of selecting a feature is to press the menu  
number shown in the bottom left of the display.  
My Numbers  
Service Dial  
To leave the menu press C repeatedly.  
Most common use of the Phonebook is covered in  
Phonebook – see page 16.  
During a call a restricted menu will be available.  
When pointing to Browse pressing f will show “Loc’ns  
(Locations)” to browse through Phonebook by location  
number or “Names” to browse by name in alphabetical  
order. When browsing by name pressing a lettered key  
will take you to the first entry starting with that letter.  
Key Guard  
Key Guard  
Key Guard will prevent any keys from being accidentally  
pressed e.g. when the telephone is being carried.  
Review shows how many locations are available in the  
Phonebook. Occupied locations are shown with “w“.  
When a call is received Key Guard will be temporarily  
disabled allowing you to press any key to answer the call.  
My Numbers is a convenient part of Phonebook where  
your voice, fax and data telephone number(s) can be  
stored and viewed.  
When the telephone is mounted in the optional Car  
Mount Kit Key Guard will be disabled.  
Emergency calls can still be made.  
Service Dial enables you to view or recall the service  
dialling number(s) preprogrammed by your Service  
Provider.  
Disabling Key Guard  
F B twice when “Free” is displayed in the  
option area of the display.  
22  
 
23  
reply. With the word “Sender:” displayed or a telephone  
number in quotation marks (“ ”), pressing D dials the  
telephone number or pressing A stores the telephone  
number in the Phonebook.  
Messages  
Messages  
Receive List  
Send List  
Create  
Review  
Parameters  
Broadcasts  
When a message has been sent or edited it will be  
stored in the Send List.  
Auto Delete  
Lifetime  
Message Centre  
Report  
Create will create a new message and send or store it in  
the Send List.  
Receive  
Message List  
Topics  
Review allows you to review how much of the message  
area is available.  
Protocol  
Languages  
Parameters  
You can receive, display, edit and/or send short text  
messages, of up to 160 characters.  
The Parameters are necessary for receiving or sending  
messages.  
Before you can send a message you must enter the  
Message Centre number into the Parameters. Your  
Service Provider will supply the Message Centre  
number.  
Auto Delete will erase messages automatically. When  
“Received Read” is selected, a new message will  
overwrite the oldest read message. When “Received  
Any” is selected, a new message will overwrite the oldest  
message even though it may not have been read.  
When new messages are received, the message  
indicator (N) flashes and they are automatically stored in  
the message area of your SIM. When all the messages  
are read, the N disappears. If the message area is full  
the N lights and a new message will be rejected. To  
receive new messages you will have to erase unwanted  
messages.  
Lifetime is the duration that your message is stored at the  
Message Centre. Delivery attempts will be repeated until  
the message has been delivered or the Lifetime expires.  
The Message Centre is where messages are sent before  
they are forwarded on to their destination. The Message  
Centre number may be pre-programmed into your SIM or  
supplied by your Service Provider.  
Received messages will be stored in the Receive List.  
Flashing “•” will indicate unread messages. Once the  
message is selected, you can read, delete, edit and  
 
When your message has been delivered a confirmation  
can be received if Report is set to “Yes”.  
Call Service  
Call Service  
Last Call  
All Calls  
The Message Centre may be able to convert the  
message to the format specified by Protocol.  
Call Waiting  
Caller's ID  
Withhold ID  
Call Charge  
Broadcasts  
Broadcast can display information about your current area  
such as traffic or weather information.  
Cost Left  
Price/Unit  
Max Cost  
Warning At  
The Message List will display the last received broadcast  
messages.  
By specifying the required subjects in Topics the  
telephone will receive related messages. If the required  
topic is not displayed, enter its topic code provided by  
your Service Provider.  
Last Call will display the duration and call charge, if  
available, of the last call during standby or the current  
call during a call. Times are indicated as: hours (0-99),  
minutes (0-59), second (0-59) - HH:MM:SS.  
The preferred Languages in which broadcast messages  
are displayed can be changed.  
All Calls displays the accumulated duration and call  
charge, if available, of incoming and outgoing calls. The  
lock code is required to reset the timer and PIN2 is  
required to reset the timer and call charge.  
Reading a Newly Received Message  
F B when “Read” is displayed in the option  
area of the display.  
Call Waiting allows you to receive a second call during  
your current call. When updating or checking the status  
of call waiting the telephone must be registered with a  
network.  
Caller’s ID allows you to check the status of Calling Line  
Identification. The telephone must be registered with a  
network.  
24  
 
25  
When updating or checking the Status of Call Divert the  
Using Withhold ID it is possible to check if you send  
Calling Line Identification information when you make a  
call. When checking the Status of Withhold ID the  
telephone must be registered with a network.  
telephone must be registered with a network.  
Security  
Call Charge will set the cost of each unit for call charge  
information and the required currency in which call  
charge is displayed.  
Security  
Phone Lock  
Call Bar  
PIN  
PIN2  
Fixed Dial  
Barred Dial  
Bar Voice  
Bar Fax  
Bar Data  
Cancel All  
Status  
Using Max. Cost can restrict use of the telephone to a  
specified number of units.  
Password  
NOTE:The duration of one unit may vary during the day,  
peak and off-peak times. Therefore, the call charge can  
be calculated accordingly. However, call charge  
information may not give an accurate reflection of the  
tariffs charged by your Service Provider.  
There are three types of security code for your  
telephone:  
Lock Code: Controls telephone security – Phone Lock.  
Factory-set to “0000”.  
Call Divert  
PIN: Controls SIM security.  
PIN2: Controls security for Fixed Dial Store and Call  
Charge metering.  
Call Divert  
Voice Calls  
Fax Calls  
Data Calls  
Cancel All  
Status  
It is recommended that you memorise your security  
codes. If you need to make a note of your security codes,  
never write them in a way that they can be recognised by  
another person. If you forget them contact your dealer for  
the lock code or your Service Provider for PIN and PIN2.  
When Call Divert is enabled the divert icon (t) is  
displayed.  
Phone Lock will prohibit normal operation of the  
telephone. Only emergency calls can be made and  
received calls answered. Once the Phone Lock is  
You can divert voice, fax and data calls using different  
circumstances and to different telephone numbers.  
   
enabled the lock icon (O) is displayed. To restore  
normal operation, enter your lock code.  
Network  
Network  
New Network  
Search Mode  
Network List  
Call Bar is used to restrict certain outgoing and/or  
incoming calls. Call Bar is controlled by a security  
Password that is supplied by your Service Provider. When  
updating or checking the Status of Call Bar the telephone  
must be registered with a network. Different Call Bar  
restrictions can be used for voice, fax and data calls. Any  
combination of call restrictions can be set.  
When not in your home country you may use a network  
that you do not directly subscribe to, this is called  
ROAMING. National Law may not permit roaming in your  
home country.  
When the PIN is enabled you will be asked to enter the  
PIN every time the telephone is switched on. If asked,  
enter the PIN followed by B. The PIN can be changed  
by pressing B when “Change” is displayed in the option  
area of the display.  
New Network is used to manually select a network that is  
available in your current location.  
When the Search Mode is set to “Automatic” the telephone  
will search through the preferred network list and select a  
new network automatically. While the Search Mode is set  
to “Manual” the telephone will display network(s) that are  
available in your current location to ask you to select  
one.  
The PIN2 can be changed by pressing B when “Change”  
is displayed in the option area of the display.  
With Fixed Dial switched on you can only make calls with  
the telephone numbers stored in Fixed Dial area of the  
Phonebook – see Fixed Dial page 19. Emergency calls  
can be made at any time. To use this function PIN2 is  
required.  
The Network List is used when the Search Mode has  
been set to “Automatic”. The location numbers in the  
Preferred Network List show the search priority.  
Selecting “Insert” stores a new network in the currently  
displayed location and then moves other networks down,  
“Edit” overwrites the old network with a new one, and  
“Add” stores a new network at the end of the list.  
Barred Dial enables you to bar particular telephone  
numbers from being dialled on the telephone.  
26  
 
27  
maintained. When the call ends the timer will start. If the  
telephone is removed from the Car Mount Kit during the  
specified delay time, the timer will be cancelled and the  
telephone will not be turned off.  
Personalise  
Language  
Tones  
Keep Alive  
Auto Answer  
Greeting  
Personalise  
All Tones  
Ring Volume  
Ring Type  
Key Volume  
Warning Tone  
When Auto Answer is switched on, and the telephone is  
mounted in the optional Car Mount Kit, a call will be  
answered without pressing any keys.  
Voice Calls  
Fax Calls  
Data Calls  
Messages  
Backlight  
DTMF Length  
Defaults  
Hot Key Dial  
A personalised Greeting can be programmed for when  
the telephone is switched on – see Alpha Entry page 21.  
The brightness of the Backlight can be changed.  
DTMF Length can be changed between short and long.  
The Language that the telephone will use for display  
messages can be changed.  
Defaults will return your Personal Settings to their factory  
default, except the lock code and language.  
In Tones, the telephone key, ring and warning tones  
(except low battery warning), can be switched off. When  
All Tones are switched off the silent indicator ([) is  
displayed.  
The source for the Hot Key telephone numbers can be  
set using the Hot Key Dial menu.  
When the Ring Volume is switched off the silent indicator  
([) is displayed. Increasing the volume level above  
maximum can set an escalating ring tone.  
A different Ring Type can be used for voice, fax, data and  
messages.  
The Keep Alive timer will delay switching off the  
telephone, when the telephone is mounted in the optional  
Car Mount Kit and the vehicle ignition is turned off. If the  
ignition is turned off during a call the call will be  
   
Battery Information  
Low Battery  
Operation of Battery Level Indicator  
When the battery power is low a  
warning tone will sound and a  
LOW BATTERY message will  
flash. The power will  
LOW  
BATTERY  
automatically shut off shortly  
after the warning tone. Fully  
charge the battery pack or  
replace it with a fully charged one.  
AC Adaptor  
During conversation finish your call immediately.  
Charging the Battery  
The battery pack must be attached to the telephone  
before the AC Adaptor.  
NOTE: DO NOT force the connector as this may  
damage the telephone and/or the AC Adaptor.  
When charging is complete remove the AC Adaptor.  
While charging Charging complete  
To maintain maximum performance of Ni-MH Battery  
Packs always use until the Low Battery Warning and  
then fully recharge.  
Telephone on  
Telephone off  
K
K
H
Indicator off  
28  
 
29  
Care and Maintenance  
Pressing any of the keys may produce a loud  
tone. Avoid holding the telephone close to the  
ear while pressing the keys.  
Do not leave the equipment in direct sunlight or  
a humid, dusty or hot area.  
Keep metallic items that may accidentally touch  
the terminals away from the equipment.  
Extreme temperatures may have a temporary  
effect on the operation of your telephone. This  
is normal and does not indicate a fault.  
Always charge the Battery Pack in a well  
ventilated area, not in direct sunlight, between  
+5°C and +35°C. It is not possible to recharge  
the battery pack if it is outside this temperature  
range.  
Do not disassemble the equipment. There are  
no user-serviceable parts.  
Do not subject the equipment to excessive  
vibration or shock.  
Avoid recharging battery packs for longer than  
recommended.  
Avoid contact with liquids. If the equipment  
becomes wet immediately remove the power  
and contact your dealer.  
Do not incinerate or dispose of the battery  
packs as ordinary rubbish. The battery packs  
must be disposed of in accordance with local  
legislation and may be recycled.  
The equipment may be cleaned with a soft  
cloth dampened with a mild detergent and  
water. Petroleum based cleaners may damage  
the equipment.  
When disposing of any packing materials or old  
equipment check with your local authorities for  
information on recycling.  
 
Other Information  
Glossary of Terms  
Dual Tone Multi-Frequency tones allow you to communicate with computerised telephone  
systems, voice mailboxes etc.  
DTMF Tones  
GSM  
Global System for Mobile Communications. The name given to the advanced digital  
technology that your telephone uses.  
Home country  
Home network  
The country where your home network operates.  
The GSM network on which your subscription details are held.  
Network  
Operator  
The organisation responsible for operating a GSM network. Each country will have a different  
network operator.  
Password  
PIN  
Used for the control of the Call Bar. Supplied by your Service Provider.  
Personal Identification Number used for SIM security. Supplied by your Service Provider. If  
the PIN is entered incorrectly 3 times, the PIN will be blocked.  
Personal Identification Number used for the control of Fixed Dial Store and Call Charge  
metering. Supplied by your Service Provider. If the PIN2 is entered incorrectly 3 times, the  
PIN2 will be blocked.  
PIN2  
30  
 
31  
Glossary of Terms continued  
PIN/PIN2 Unblocking Key. Used to unblock the PIN/PIN2. Supplied by your Service Provider.  
If the PUK/PUK2 is entered incorrectly 10 times, the PUK/PUK2 will be blocked.  
PUK/ PUK2  
The act of locking on to a GSM network. This is usually performed automatically by your  
telephone.  
Registration  
Roaming  
The ability to use your telephone on networks other than your Home network.  
The organisation responsible for providing access to the GSM network.  
Service  
Provider  
Subscriber Identity Module. A small smart-card which stores unique subscriber and  
user-entered information such as Phonebook and Short Messages. Supplied by your Service  
Provider.  
SIM  
Trouble Shooting  
Should any problem persist contact your dealer.  
Problem  
Cause  
Remedy  
Telephone will not  
switch on.  
Check that the Battery Pack is fully charged and correctly  
connected to the telephone.  
 
Extremely short  
battery life for a new the condition of the battery  
battery pack. pack can affect battery life.  
The network you are using and  
Short battery life for The battery pack was worn  
an old battery pack. out.  
Replace with a new one.  
To maintain maximum performance always use until the  
Low Battery Warning and then fully recharge the battery  
pack.  
The life of the battery pack is  
Short battery life for affected by improper charging,  
Ni-MH battery pack. this is inherent in all Ni-MH  
batteries.  
To revive the Battery Pack use the telephone until the Low  
Battery Warning and then fully recharge, repeat this  
process at least three times. However, if the battery life is  
still short, the Battery Pack has eventually worn out.  
Replace with a new one.  
When the Battery Pack has  
The telephone  
cannot be switched telephone will take a short time  
on when charging  
been deeply discharged the  
Leave the telephone charging the Battery Pack for a few  
minutes before attempting to switch it on.  
to detect which type of Battery  
Pack it is charging  
The telephone is locked.  
Outgoing calls are barred.  
Unlock the telephone (Menu: Security: Phone Lock)  
Calls cannot be  
made.  
Disable the outgoing call barring (Menu: Security: Call Bar)  
The telephone is not registered Move to a coverage area and operate your telephone after  
to a network. it has registered with a network.  
32  
33  
Trouble Shooting continued  
Check your SIM supports Fixed Dial.  
Calls cannot be  
made from Fixed  
Dial Store  
Check if the Fixed Dial is switched on (Menu: Security:  
Fixed Dial).  
Check the telephone number is stored in the Fixed Dial.  
The telephone is not switched  
on.  
Switch the telephone on.  
Calls cannot be  
received.  
Incoming calls are barred.  
Disable the incoming call barring (Menu: Security: Call Bar)  
The telephone is not registered Move to a coverage area and operate your telephone after  
to a network.  
it has registered with a network.  
Check that the antenna symbol S is displayed. Move to a  
coverage area and operate your telephone when the  
antenna symbol is displayed.  
Emergency calls  
cannot be made.  
You are not in a GSM  
coverage area.  
The telephone is locked.  
Fixed Dial is switched on.  
Unlock the telephone (Menu: Security: Phone Lock)  
Switch off Fixed Dial (Menu: Security: Fixed Dial)  
Telephone numbers  
cannot be recalled.  
Important Error Messages  
Area not  
Allowed  
Roaming in the selected area is not allowed.  
 
Network not  
Allowed  
Roaming with the selected network is not allowed.  
Security  
Failure  
The network has detected authentication failure because your SIM is not registered with that  
network. Contact your Service Provider.  
The SIM is blocked because the wrong PUK has been entered ten times. Contact your Service  
Provider.  
SIM Blocked  
SIM Error  
The telephone has detected a problem with the SIM. Switch the telephone off and then back on.  
If the message does not disappear contact your Service Provider.  
Message  
Rejected  
Store Full  
A message has been received but the message store is full. To receive messages, delete some  
of the currently stored messages or set messages to automatically clear (Menu: Messages:  
Parameters: Auto Delete)  
PIN2  
Invalidated  
The PIN2 is blocked permanently because the wrong PUK2 has been entered 10 times. Services  
controlled by PIN2 cannot be used. Contact your Service Provider.  
Warning  
Store Full  
Continue?  
The message area is full. Your messages cannot be stored until some of the currently stored  
messages are deleted.  
Auto Redial  
List Full  
Redial list of unsuccessfully dialled numbers is full. Switch the telephone off and then on again.  
34  
35  
Specifications  
Telephone  
GSM900 Class 4  
GSM1800 Class 1  
Type  
Temperature range  
Charging  
Storage  
+5°C to +35°C  
-20°C to +60°C  
Battery – Attached to telephone  
Battery Pack (EB-BSD70) Battery Pack (EB-BMD70) Battery Pack (EB-BLD70)  
Weight  
134g  
162g  
155g  
Dimensions  
Height x Width x Depth  
132 x 45.5 x 19.5mm  
3.6V DC, 860mAh Li-Ion  
132 x 45.5 x 26mm  
3.6V DC, 950mAh Ni-MH  
132 x 45.5 x 30mm  
3.6V DC, 1500mAh Li-Ion  
Supply Voltage  
Standby time (h)  
Talk Time (h)  
Up to 100  
4
Up to 105  
4
Up to 180  
7.5  
Charge Time (min)  
140  
120  
300  
NOTE: Charge time will be longer when the telephone is turned on. Battery life is affected by the network you are  
using and the condition of the battery pack.  
 
The Serial Number can be found on the outside of the telephone under the battery. For your convenience we  
recommend that you note the following details as a record of your purchase.  
Part Number  
Serial Number  
Dealer Name  
Purchase Date  
BULL CP8 PATENT  
© Matsushita Communication Industrial UK Limited 1998  
Information in this document is subject to change without notice. No part of these instructions may be reproduced or  
transmitted in any form or by any means without obtaining express permission from Matsushita Communication  
Industrial UK Limited  
*7LA845A*  
990119  
Printed in UK  

Motorola MPx220 User Manual
LG Electronics MFL67008601 User Manual
Kenwood KDC 516S User Manual
Hitachi Travelstar HTE725050A9A364 User Manual
Ericsson SH888 User Manual
Emerson HD7999 User Manual
D Link BROADBAND DPH 540 User Manual
Casio Clock ID 12 User Manual
Adder Technology SMARTVIEW PRO SV8PRO User Manual
ABB CONTROLMASTER CM10 User Manual